ARM: mach-nuc93x: delete

This architecture received only generic maintenance since December 2009
when it was originally submitted, and no actual additional support since
then.  It has no defconfig entry either, meaning that it was never built
by the ARM KAutobuild.  Incidentally it currently doesn't build either
when CONFIG_MACH_NUC932EVB is selected which is the only possible config
choice.

This is therefore dead code and should be removed.  If someone wants to
revive this code, it could be retrieved from the Git repository, and
ideally be merged in mach-w90x900/ instead.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 0 insertions, 100 deletions

diff --git a/arch/arm/mach-nuc93x/time.c b/arch/arm/mach-nuc93x/time.c
deleted file mode 100644
index 2f90f9d..0000000
--- a/arch/arm/mach-nuc93x/time.c
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * linux/arch/arm/mach-nuc93x/time.c
- *
- * Copyright (c) 2009 Nuvoton technology corporation.
- *
- * Wan ZongShun <mcuos.com@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/leds.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/time.h>
-
-#include <mach/system.h>
-#include <mach/map.h>
-#include <mach/regs-timer.h>
-
-#define RESETINT	0x01
-#define PERIOD		(0x01 << 27)
-#define ONESHOT		(0x00 << 27)
-#define COUNTEN		(0x01 << 30)
-#define INTEN		(0x01 << 29)
-
-#define TICKS_PER_SEC	100
-#define PRESCALE	0x63 /* Divider = prescale + 1 */
-
-unsigned int timer0_load;
-
-static unsigned long nuc93x_gettimeoffset(void)
-{
-	return 0;
-}
-
-/*IRQ handler for the timer*/
-
-static irqreturn_t nuc93x_timer_interrupt(int irq, void *dev_id)
-{
-	timer_tick();
-	__raw_writel(0x01, REG_TISR); /* clear TIF0 */
-	return IRQ_HANDLED;
-}
-
-static struct irqaction nuc93x_timer_irq = {
-	.name		= "nuc93x Timer Tick",
-	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
-	.handler	= nuc93x_timer_interrupt,
-};
-
-/*Set up timer reg.*/
-
-static void nuc93x_timer_setup(void)
-{
-	struct clk *ck_ext = clk_get(NULL, "ext");
-	struct clk *ck_timer = clk_get(NULL, "timer");
-	unsigned int rate, val = 0;
-
-	BUG_ON(IS_ERR(ck_ext) || IS_ERR(ck_timer));
-
-	clk_enable(ck_timer);
-	rate = clk_get_rate(ck_ext);
-	clk_put(ck_ext);
-	rate = rate / (PRESCALE + 0x01);
-
-	 /* set a known state */
-	__raw_writel(0x00, REG_TCSR0);
-	__raw_writel(RESETINT, REG_TISR);
-
-	timer0_load = (rate / TICKS_PER_SEC);
-	__raw_writel(timer0_load, REG_TICR0);
-
-	val |= (PERIOD | COUNTEN | INTEN | PRESCALE);;
-	__raw_writel(val, REG_TCSR0);
-
-}
-
-static void __init nuc93x_timer_init(void)
-{
-	nuc93x_timer_setup();
-	setup_irq(IRQ_TIMER0, &nuc93x_timer_irq);
-}
-
-struct sys_timer nuc93x_timer = {
-	.init		= nuc93x_timer_init,
-	.offset		= nuc93x_gettimeoffset,
-	.resume		= nuc93x_timer_setup
-};