[PATCH] ARM: fixup irqflags breakage after ARM genirq merge

The irgflags consolidation did conflict with the ARM to generic IRQ
conversion and was not applied for ARM. Fix it up.

Use the new IRQF_ constants and remove the SA_INTERRUPT define

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5 files changed, 6 insertions, 6 deletions

diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index 9193330..b742261 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -357,7 +357,7 @@ static void __init osk_mistral_init(void)
 		 */
 		ret = request_irq(OMAP_GPIO_IRQ(OMAP_MPUIO(2)),
 				&osk_mistral_wake_interrupt,
-				SA_SHIRQ, "mistral_wakeup",
+				IRQF_SHARED, "mistral_wakeup",
 				&osk_mistral_wake_interrupt);
 		if (ret != 0) {
 			omap_free_gpio(OMAP_MPUIO(2));
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 880cd2d..34eb79e 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -133,7 +133,7 @@ static struct irqchip omap_fpga_irq = {
  * mask_ack routine for all of the FPGA interrupts has been changed from
  * fpga_mask_ack_irq() to fpga_ack_irq() so that the specific FPGA interrupt
  * being serviced is left unmasked.  We can do this because the FPGA cascade
- * interrupt is installed with the SA_INTERRUPT flag, which leaves all
+ * interrupt is installed with the IRQF_DISABLED flag, which leaves all
  * interrupts masked at the CPU while an FPGA interrupt handler executes.
  *
  * Limited testing indicates that this workaround appears to be effective
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 1b4e1d5..cd76185 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -690,7 +690,7 @@ static irqreturn_t  omap_wakeup_interrupt(int  irq, void *  dev,
 
 static struct irqaction omap_wakeup_irq = {
 	.name		= "peripheral wakeup",
-	.flags		= SA_INTERRUPT,
+	.flags		= IRQF_DISABLED,
 	.handler	= omap_wakeup_interrupt
 };
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index 5615fb8..976edfb8 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -253,7 +253,7 @@ static void __init omap_serial_set_port_wakeup(int gpio_nr)
 	}
 	omap_set_gpio_direction(gpio_nr, 1);
 	ret = request_irq(OMAP_GPIO_IRQ(gpio_nr), &omap_serial_wake_interrupt,
-			  SA_TRIGGER_RISING, "serial wakeup", NULL);
+			  IRQF_TRIGGER_RISING, "serial wakeup", NULL);
 	if (ret) {
 		omap_free_gpio(gpio_nr);
 		printk(KERN_ERR "No interrupt for UART wake GPIO: %i\n",
diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c
index a01f0ef..4d91b9f 100644
--- a/arch/arm/mach-omap1/time.c
+++ b/arch/arm/mach-omap1/time.c
@@ -177,7 +177,7 @@ static irqreturn_t omap_mpu_timer_interrupt(int irq, void *dev_id,
 
 static struct irqaction omap_mpu_timer_irq = {
 	.name		= "mpu timer",
-	.flags		= SA_INTERRUPT | SA_TIMER,
+	.flags		= IRQF_DISABLED | IRQF_TIMER,
 	.handler	= omap_mpu_timer_interrupt,
 };
 
@@ -191,7 +191,7 @@ static irqreturn_t omap_mpu_timer1_interrupt(int irq, void *dev_id,
 
 static struct irqaction omap_mpu_timer1_irq = {
 	.name		= "mpu timer1 overflow",
-	.flags		= SA_INTERRUPT,
+	.flags		= IRQF_DISABLED,
 	.handler	= omap_mpu_timer1_interrupt,
 };