ARM: OMAP2+: Remove legacy support for zoom platforms

We now have pretty decent device tree based support for
zoom platforms. It's not complete, but basics work for
me so adding more features should be quite trivial.

Looks like also 3630 sdp is zoom based, and looking
at it's board file should also be trivial to support
with the device tree based booting.

Patches are welcome if people are still using these.

Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 0 insertions, 159 deletions

diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
deleted file mode 100644
index 1a3dd86..0000000
--- a/arch/arm/mach-omap2/board-zoom.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * Copyright (C) 2009-2010 Texas Instruments Inc.
- * Mikkel Christensen <mlc@ti.com>
- * Felipe Balbi <balbi@ti.com>
- *
- * Modified from mach-omap2/board-ldp.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-#include <linux/i2c/twl.h>
-#include <linux/mtd/nand.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-
-#include "board-zoom.h"
-
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-#include "sdram-hynix-h8mbx00u0mer-0em.h"
-
-#define ZOOM3_EHCI_RESET_GPIO		64
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	/* WLAN IRQ - GPIO 162 */
-	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
-	/* WLAN POWER ENABLE - GPIO 101 */
-	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
-	/* WLAN SDIO: MMC3 CMD */
-	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 CLK */
-	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	/* WLAN SDIO: MMC3 DAT[0-3] */
-	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static struct mtd_partition zoom_nand_partitions[] = {
-	/* All the partition sizes are listed in terms of NAND block size */
-	{
-		.name		= "X-Loader-NAND",
-		.offset		= 0,
-		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "U-Boot-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
-		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	},
-	{
-		.name		= "Boot Env-NAND",
-		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
-		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
-	},
-	{
-		.name		= "Kernel-NAND",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
-		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
-	},
-	{
-		.name		= "system",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
-		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
-	},
-	{
-		.name		= "userdata",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-	{
-		.name		= "cache",
-		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
-		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
-	},
-};
-
-static struct usbhs_phy_data phy_data[] __initdata = {
-	{
-		.port = 2,
-		.reset_gpio = ZOOM3_EHCI_RESET_GPIO,
-		.vcc_gpio = -EINVAL,
-	},
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-	.port_mode[1]		= OMAP_EHCI_PORT_MODE_PHY,
-};
-
-static void __init omap_zoom_init(void)
-{
-	if (machine_is_omap_zoom2()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
-	} else if (machine_is_omap_zoom3()) {
-		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
-		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
-
-		usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
-		usbhs_init(&usbhs_bdata);
-	}
-
-	board_nand_init(zoom_nand_partitions,
-			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
-			NAND_BUSWIDTH_16, nand_default_timings);
-	zoom_debugboard_init();
-	zoom_peripherals_init();
-
-	if (machine_is_omap_zoom2())
-		omap_sdrc_init(mt46h32m32lf6_sdrc_params,
-					  mt46h32m32lf6_sdrc_params);
-	else if (machine_is_omap_zoom3())
-		omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
-					  h8mbx00u0mer0em_sdrc_params);
-
-	zoom_display_init();
-}
-
-MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3430_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3430_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END
-
-MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap3_map_io,
-	.init_early	= omap3630_init_early,
-	.init_irq	= omap3_init_irq,
-	.handle_irq	= omap3_intc_handle_irq,
-	.init_machine	= omap_zoom_init,
-	.init_late	= omap3630_init_late,
-	.init_time	= omap3_sync32k_timer_init,
-	.restart	= omap3xxx_restart,
-MACHINE_END