diff options
author | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-10-15 23:08:50 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@woody.linux-foundation.org> | 2007-10-15 23:08:50 (GMT) |
commit | 65a6ec0d72a07f16719e9b7a96e1c4bae044b591 (patch) | |
tree | 344e03a5039a44982c1b78d6113633b21b434820 /arch/arm/mach-omap2 | |
parent | 541010e4b8921cd781ff02ae68028501457045b6 (diff) | |
parent | 0181b61a988424b5cc44fe09e6968142359c815e (diff) | |
download | linux-fsl-qoriq-65a6ec0d72a07f16719e9b7a96e1c4bae044b591.tar.xz |
Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (95 commits)
[ARM] 4578/1: CM-x270: PCMCIA support
[ARM] 4577/1: ITE 8152 PCI bridge support
[ARM] 4576/1: CM-X270 machine support
[ARM] pxa: Avoid pxa_gpio_mode() in gpio_direction_{in,out}put()
[ARM] pxa: move pxa_set_mode() from pxa2xx_mainstone.c to mainstone.c
[ARM] pxa: move pxa_set_mode() from pxa2xx_lubbock.c to lubbock.c
[ARM] pxa: Make cpu_is_pxaXXX dependent on configuration symbols
[ARM] pxa: PXA3xx base support
[NET] smc91x: fix PXA DMA support code
[SERIAL] Fix console initialisation ordering
[ARM] pxa: tidy up arch/arm/mach-pxa/Makefile
[ARM] Update arch/arm/Kconfig for drivers/Kconfig changes
[ARM] 4600/1: fix kernel build failure with build-id-supporting binutils
[ARM] 4599/1: Preserve ATAG list for use with kexec (2.6.23)
[ARM] Rename consistent_sync() as dma_cache_maint()
[ARM] 4572/1: ep93xx: add cirrus logic edb9307 support
[ARM] 4596/1: S3C2412: Correct IRQs for SDI+CF and add decoding support
[ARM] 4595/1: ns9xxx: define registers as void __iomem * instead of volatile u32
[ARM] 4594/1: ns9xxx: use the new gpio functions
[ARM] 4593/1: ns9xxx: implement generic clockevents
...
Diffstat (limited to 'arch/arm/mach-omap2')
-rw-r--r-- | arch/arm/mach-omap2/Kconfig | 11 | ||||
-rw-r--r-- | arch/arm/mach-omap2/Makefile | 1 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-2430sdp.c | 218 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-apollon.c | 99 | ||||
-rw-r--r-- | arch/arm/mach-omap2/board-h4.c | 46 | ||||
-rw-r--r-- | arch/arm/mach-omap2/devices.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap2/gpmc.c | 47 | ||||
-rw-r--r-- | arch/arm/mach-omap2/id.c | 6 | ||||
-rw-r--r-- | arch/arm/mach-omap2/io.c | 22 | ||||
-rw-r--r-- | arch/arm/mach-omap2/irq.c | 19 | ||||
-rw-r--r-- | arch/arm/mach-omap2/memory.c | 18 | ||||
-rw-r--r-- | arch/arm/mach-omap2/mux.c | 38 | ||||
-rw-r--r-- | arch/arm/mach-omap2/usb-tusb6010.c | 349 |
13 files changed, 787 insertions, 93 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7393109..7069c9d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,6 +11,10 @@ config ARCH_OMAP2420 select OMAP_DM_TIMER select ARCH_OMAP_OTG +config ARCH_OMAP2430 + bool "OMAP2430 support" + depends on ARCH_OMAP24XX + comment "OMAP Board Type" depends on ARCH_OMAP2 @@ -21,8 +25,13 @@ config MACH_OMAP_GENERIC config MACH_OMAP_H4 bool "OMAP 2420 H4 board" depends on ARCH_OMAP2 && ARCH_OMAP24XX - select OMAP_DEBUG_LEDS if LEDS || LEDS_OMAP_DEBUG + select OMAP_DEBUG_DEVICES config MACH_OMAP_APOLLON bool "OMAP 2420 Apollon board" depends on ARCH_OMAP2 && ARCH_OMAP24XX + +config MACH_OMAP_2430SDP + bool "OMAP 2430 SDP board" + depends on ARCH_OMAP2 && ARCH_OMAP24XX + diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 266d88e..b05b738 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -14,5 +14,6 @@ obj-$(CONFIG_PM) += pm.o pm-domain.o sleep.o # Specific board support obj-$(CONFIG_MACH_OMAP_GENERIC) += board-generic.o obj-$(CONFIG_MACH_OMAP_H4) += board-h4.o +obj-$(CONFIG_MACH_OMAP_2430SDP) += board-2430sdp.o obj-$(CONFIG_MACH_OMAP_APOLLON) += board-apollon.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c new file mode 100644 index 0000000..7e76fbf --- /dev/null +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -0,0 +1,218 @@ +/* + * linux/arch/arm/mach-omap2/board-2430sdp.c + * + * Copyright (C) 2006 Texas Instruments + * + * Modified from mach-omap2/board-generic.c + * + * Initial Code : Based on a patch from Komal Shah and Richard Woodruff + * Updated the Code for 2430 SDP : Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/clk.h> + +#include <asm/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/flash.h> + +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> +#include <asm/arch/board.h> +#include <asm/arch/common.h> +#include <asm/arch/gpmc.h> +#include "prcm-regs.h" + +#include <asm/io.h> + + +#define SDP2430_FLASH_CS 0 +#define SDP2430_SMC91X_CS 5 + +static struct mtd_partition sdp2430_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "bootloader", + .offset = 0, + .size = SZ_256K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "params", + .offset = MTDPART_OFS_APPEND, + .size = SZ_128K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "kernel", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "filesystem", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct flash_platform_data sdp2430_flash_data = { + .map_name = "cfi_probe", + .width = 2, + .parts = sdp2430_partitions, + .nr_parts = ARRAY_SIZE(sdp2430_partitions), +}; + +static struct resource sdp2430_flash_resource = { + .start = SDP2430_CS0_BASE, + .end = SDP2430_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device sdp2430_flash_device = { + .name = "omapflash", + .id = 0, + .dev = { + .platform_data = &sdp2430_flash_data, + }, + .num_resources = 1, + .resource = &sdp2430_flash_resource, +}; + +static struct resource sdp2430_smc91x_resources[] = { + [0] = { + .start = SDP2430_CS0_BASE, + .end = SDP2430_CS0_BASE + SZ_64M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sdp2430_smc91x_device = { + .name = "smc91x", + .id = -1, + .num_resources = ARRAY_SIZE(sdp2430_smc91x_resources), + .resource = sdp2430_smc91x_resources, +}; + +static struct platform_device *sdp2430_devices[] __initdata = { + &sdp2430_smc91x_device, + &sdp2430_flash_device, +}; + +static inline void __init sdp2430_init_smc91x(void) +{ + int eth_cs; + unsigned long cs_mem_base; + unsigned int rate; + struct clk *l3ck; + + eth_cs = SDP2430_SMC91X_CS; + + l3ck = clk_get(NULL, "core_l3_ck"); + if (IS_ERR(l3ck)) + rate = 100000000; + else + rate = clk_get_rate(l3ck); + + /* Make sure CS1 timings are correct, for 2430 always muxed */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200); + + if (rate >= 160000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else if (rate >= 130000000) { + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4); + } else { /* rate = 100000000 */ + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F); + gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2); + } + + if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { + printk(KERN_ERR "Failed to request GPMC mem for smc91x\n"); + return; + } + + sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300; + sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f; + udelay(100); + + if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { + printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", + OMAP24XX_ETHR_GPIO_IRQ); + gpmc_cs_free(eth_cs); + return; + } + omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); + +} + +static void __init omap_2430sdp_init_irq(void) +{ + omap2_init_common_hw(); + omap_init_irq(); + omap_gpio_init(); + sdp2430_init_smc91x(); +} + +static struct omap_uart_config sdp2430_uart_config __initdata = { + .enabled_uarts = ((1 << 0) | (1 << 1) | (1 << 2)), +}; + +static struct omap_board_config_kernel sdp2430_config[] = { + {OMAP_TAG_UART, &sdp2430_uart_config}, +}; + +static void __init omap_2430sdp_init(void) +{ + platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices)); + omap_board_config = sdp2430_config; + omap_board_config_size = ARRAY_SIZE(sdp2430_config); + omap_serial_init(); +} + +static void __init omap_2430sdp_map_io(void) +{ + omap2_map_common_io(); +} + +MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ + .phys_io = 0x48000000, + .io_pg_offst = ((0xd8000000) >> 18) & 0xfffc, + .boot_params = 0x80000100, + .map_io = omap_2430sdp_map_io, + .init_irq = omap_2430sdp_init_irq, + .init_machine = omap_2430sdp_init, + .timer = &omap_timer, +MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index 878ff91..3bb49c1 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -25,6 +25,8 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/delay.h> +#include <linux/leds.h> +#include <linux/irq.h> #include <asm/hardware.h> #include <asm/mach-types.h> @@ -32,10 +34,12 @@ #include <asm/mach/flash.h> #include <asm/arch/gpio.h> +#include <asm/arch/led.h> #include <asm/arch/mux.h> #include <asm/arch/usb.h> #include <asm/arch/board.h> #include <asm/arch/common.h> +#include <asm/arch/gpmc.h> #include "prcm-regs.h" /* LED & Switch macros */ @@ -46,6 +50,9 @@ #define SW_UP_GPIO17 17 #define SW_DOWN_GPIO58 58 +#define APOLLON_FLASH_CS 0 +#define APOLLON_ETH_CS 1 + static struct mtd_partition apollon_partitions[] = { { .name = "X-Loader + U-Boot", @@ -85,10 +92,10 @@ static struct flash_platform_data apollon_flash_data = { .nr_parts = ARRAY_SIZE(apollon_partitions), }; -static struct resource apollon_flash_resource = { - .start = APOLLON_CS0_BASE, - .end = APOLLON_CS0_BASE + SZ_128K, - .flags = IORESOURCE_MEM, +static struct resource apollon_flash_resource[] = { + [0] = { + .flags = IORESOURCE_MEM, + }, }; static struct platform_device apollon_onenand_device = { @@ -97,14 +104,24 @@ static struct platform_device apollon_onenand_device = { .dev = { .platform_data = &apollon_flash_data, }, - .num_resources = ARRAY_SIZE(&apollon_flash_resource), - .resource = &apollon_flash_resource, + .num_resources = ARRAY_SIZE(apollon_flash_resource), + .resource = apollon_flash_resource, }; +static void __init apollon_flash_init(void) +{ + unsigned long base; + + if (gpmc_cs_request(APOLLON_FLASH_CS, SZ_128K, &base) < 0) { + printk(KERN_ERR "Cannot request OneNAND GPMC CS\n"); + return; + } + apollon_flash_resource[0].start = base; + apollon_flash_resource[0].end = base + SZ_128K - 1; +} + static struct resource apollon_smc91x_resources[] = { [0] = { - .start = APOLLON_ETHR_START, /* Physical */ - .end = APOLLON_ETHR_START + 0xf, .flags = IORESOURCE_MEM, }, [1] = { @@ -126,14 +143,51 @@ static struct platform_device apollon_lcd_device = { .id = -1, }; +static struct omap_led_config apollon_led_config[] = { + { + .cdev = { + .name = "apollon:led0", + }, + .gpio = LED0_GPIO13, + }, + { + .cdev = { + .name = "apollon:led1", + }, + .gpio = LED1_GPIO14, + }, + { + .cdev = { + .name = "apollon:led2", + }, + .gpio = LED2_GPIO15, + }, +}; + +static struct omap_led_platform_data apollon_led_data = { + .nr_leds = ARRAY_SIZE(apollon_led_config), + .leds = apollon_led_config, +}; + +static struct platform_device apollon_led_device = { + .name = "omap-led", + .id = -1, + .dev = { + .platform_data = &apollon_led_data, + }, +}; + static struct platform_device *apollon_devices[] __initdata = { &apollon_onenand_device, &apollon_smc91x_device, &apollon_lcd_device, + &apollon_led_device, }; static inline void __init apollon_init_smc91x(void) { + unsigned long base; + /* Make sure CS1 timings are correct */ GPMC_CONFIG1_1 = 0x00011203; GPMC_CONFIG2_1 = 0x001f1f01; @@ -141,13 +195,20 @@ static inline void __init apollon_init_smc91x(void) GPMC_CONFIG4_1 = 0x1c091c09; GPMC_CONFIG5_1 = 0x041f1f1f; GPMC_CONFIG6_1 = 0x000004c4; - GPMC_CONFIG7_1 = 0x00000f40 | (APOLLON_CS1_BASE >> 24); + + if (gpmc_cs_request(APOLLON_ETH_CS, SZ_16M, &base) < 0) { + printk(KERN_ERR "Failed to request GPMC CS for smc91x\n"); + return; + } + apollon_smc91x_resources[0].start = base + 0x300; + apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); omap_cfg_reg(W4__24XX_GPIO74); if (omap_request_gpio(APOLLON_ETHR_GPIO_IRQ) < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); + gpmc_cs_free(APOLLON_ETH_CS); return; } omap_set_gpio_direction(APOLLON_ETHR_GPIO_IRQ, 1); @@ -175,6 +236,13 @@ static struct omap_mmc_config apollon_mmc_config __initdata = { }, }; +static struct omap_usb_config apollon_usb_config __initdata = { + .register_dev = 1, + .hmc_mode = 0x14, /* 0:dev 1:host1 2:disable */ + + .pins[0] = 6, +}; + static struct omap_lcd_config apollon_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -182,6 +250,7 @@ static struct omap_lcd_config apollon_lcd_config __initdata = { static struct omap_board_config_kernel apollon_config[] = { { OMAP_TAG_UART, &apollon_uart_config }, { OMAP_TAG_MMC, &apollon_mmc_config }, + { OMAP_TAG_USB, &apollon_usb_config }, { OMAP_TAG_LCD, &apollon_lcd_config }, }; @@ -250,10 +319,22 @@ static void __init apollon_sw_init(void) return; } +static void __init apollon_usb_init(void) +{ + /* USB device */ + /* DEVICE_SUSPEND */ + omap_cfg_reg(P21_242X_GPIO12); + omap_request_gpio(12); + omap_set_gpio_direction(12, 0); /* OUT */ + omap_set_gpio_dataout(12, 0); +} + static void __init omap_apollon_init(void) { apollon_led_init(); apollon_sw_init(); + apollon_flash_init(); + apollon_usb_init(); /* REVISIT: where's the correct place */ omap_cfg_reg(W19_24XX_SYS_NIRQ); diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index 452193f..f125f43 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -131,26 +131,6 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -static struct resource h4_smc91x_resources[] = { - [0] = { - .start = OMAP24XX_ETHR_START, /* Physical */ - .end = OMAP24XX_ETHR_START + 0xf, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP24XX_ETHR_GPIO_IRQ), - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device h4_smc91x_device = { - .name = "smc91x", - .id = -1, - .num_resources = ARRAY_SIZE(h4_smc91x_resources), - .resource = h4_smc91x_resources, -}; - /* Select between the IrDA and aGPS module */ static int h4_select_irda(struct device *dev, int state) @@ -266,29 +246,14 @@ static struct platform_device h4_lcd_device = { .id = -1, }; -static struct resource h4_led_resources[] = { - [0] = { - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device h4_led_device = { - .name = "omap_dbg_led", - .id = -1, - .num_resources = ARRAY_SIZE(h4_led_resources), - .resource = h4_led_resources, -}; - static struct platform_device *h4_devices[] __initdata = { - &h4_smc91x_device, &h4_flash_device, &h4_irda_device, &h4_kp_device, &h4_lcd_device, - &h4_led_device, }; -static inline void __init h4_init_smc91x(void) +static inline void __init h4_init_debug(void) { /* Make sure CS1 timings are correct */ GPMC_CONFIG1_1 = 0x00011200; @@ -301,12 +266,8 @@ static inline void __init h4_init_smc91x(void) udelay(100); omap_cfg_reg(M15_24XX_GPIO92); - if (omap_request_gpio(OMAP24XX_ETHR_GPIO_IRQ) < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", - OMAP24XX_ETHR_GPIO_IRQ); - return; - } - omap_set_gpio_direction(OMAP24XX_ETHR_GPIO_IRQ, 1); + if (debug_card_init(cs_mem_base, OMAP24XX_ETHR_GPIO_IRQ) < 0) + gpmc_cs_free(eth_cs); } static void __init omap_h4_init_irq(void) @@ -314,7 +275,6 @@ static void __init omap_h4_init_irq(void) omap2_init_common_hw(); omap_init_irq(); omap_gpio_init(); - h4_init_smc91x(); } static struct omap_uart_config h4_uart_config __initdata = { diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 52ec2f2..b603bc5 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -55,8 +55,10 @@ static void omap_init_i2c(void) if (machine_is_omap_h4()) return; - omap_cfg_reg(J15_24XX_I2C2_SCL); - omap_cfg_reg(H19_24XX_I2C2_SDA); + if (!cpu_is_omap2430()) { + omap_cfg_reg(J15_24XX_I2C2_SCL); + omap_cfg_reg(H19_24XX_I2C2_SDA); + } (void) platform_device_register(&omap_i2c_device2); } diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index e290b98..5a4cc20 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -22,7 +22,14 @@ #undef DEBUG +#ifdef CONFIG_ARCH_OMAP2420 #define GPMC_BASE 0x6800a000 +#endif + +#ifdef CONFIG_ARCH_OMAP2430 +#define GPMC_BASE 0x6E000000 +#endif + #define GPMC_REVISION 0x00 #define GPMC_SYSCONFIG 0x10 #define GPMC_SYSSTATUS 0x14 @@ -88,7 +95,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) } /* TODO: Add support for gpmc_fck to clock framework and use it */ -static unsigned long gpmc_get_fclk_period(void) +unsigned long gpmc_get_fclk_period(void) { /* In picoseconds */ return 1000000000 / ((clk_get_rate(gpmc_l3_clk)) / 1000); @@ -104,6 +111,13 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } +unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) +{ + unsigned long ticks = gpmc_ns_to_ticks(time_ns); + + return ticks * gpmc_get_fclk_period() / 1000; +} + #ifdef DEBUG static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, int time, const char *name) @@ -120,15 +134,21 @@ static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit, else ticks = gpmc_ns_to_ticks(time); nr_bits = end_bit - st_bit + 1; - if (ticks >= 1 << nr_bits) + if (ticks >= 1 << nr_bits) { +#ifdef DEBUG + printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n", + cs, name, time, ticks, 1 << nr_bits); +#endif return -1; + } mask = (1 << nr_bits) - 1; l = gpmc_cs_read_reg(cs, reg); #ifdef DEBUG - printk(KERN_INFO "GPMC CS%d: %-10s: %d ticks, %3lu ns (was %i ticks)\n", + printk(KERN_INFO + "GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n", cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000, - (l >> st_bit) & mask); + (l >> st_bit) & mask, time); #endif l &= ~(mask << st_bit); l |= ticks << st_bit; @@ -157,7 +177,7 @@ int gpmc_cs_calc_divider(int cs, unsigned int sync_clk) div = l / gpmc_get_fclk_period(); if (div > 4) return -1; - if (div < 0) + if (div <= 0) div = 1; return div; @@ -191,14 +211,19 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access); + /* caller is expected to have initialized CONFIG1 to cover + * at least sync vs async + */ + l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) { #ifdef DEBUG - printk(KERN_INFO "GPMC CS%d CLK period is %lu (div %d)\n", - cs, gpmc_get_fclk_period(), div); + printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n", + cs, (div * gpmc_get_fclk_period()) / 1000, div); #endif - - l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - l &= ~0x03; - l |= (div - 1); + l &= ~0x03; + l |= (div - 1); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l); + } return 0; } diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 871ace4..4dfd878 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -17,7 +17,13 @@ #include <asm/io.h> +#if defined(CONFIG_ARCH_OMAP2420) #define OMAP24XX_TAP_BASE io_p2v(0x48014000) +#endif + +#if defined(CONFIG_ARCH_OMAP2430) +#define OMAP24XX_TAP_BASE io_p2v(0x4900A000) +#endif #define OMAP_TAP_IDCODE 0x0204 #define OMAP_TAP_PROD_ID 0x0208 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 82dc70f..5a4091f 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -5,6 +5,7 @@ * * Copyright (C) 2005 Nokia Corporation * Author: Juha Yrjölä <juha.yrjola@nokia.com> + * Updated map desc to add 2430 support : <x0khasim@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -26,6 +27,7 @@ extern void omap_sram_init(void); extern int omap2_clk_init(void); extern void omap2_check_revision(void); +extern void omap2_init_memory(void); extern void gpmc_init(void); extern void omapfb_reserve_sdram(void); @@ -40,6 +42,20 @@ static struct map_desc omap2_io_desc[] __initdata = { .length = L3_24XX_SIZE, .type = MT_DEVICE }, +#ifdef CONFIG_ARCH_OMAP2430 + { + .virtual = L4_WK_243X_VIRT, + .pfn = __phys_to_pfn(L4_WK_243X_PHYS), + .length = L4_WK_243X_SIZE, + .type = MT_DEVICE + }, + { + .virtual = OMAP243X_GPMC_VIRT, + .pfn = __phys_to_pfn(OMAP243X_GPMC_PHYS), + .length = OMAP243X_GPMC_SIZE, + .type = MT_DEVICE + }, +#endif { .virtual = DSP_MEM_24XX_VIRT, .pfn = __phys_to_pfn(DSP_MEM_24XX_PHYS), @@ -80,5 +96,11 @@ void __init omap2_init_common_hw(void) { omap2_mux_init(); omap2_clk_init(); +/* + * Need to Fix this for 2430 + */ +#ifndef CONFIG_ARCH_OMAP2430 + omap2_init_memory(); +#endif gpmc_init(); } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index a39d306..f064f72 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -37,7 +37,7 @@ static struct omap_irq_bank { } __attribute__ ((aligned(4))) irq_banks[] = { { /* MPU INTC */ - .base_reg = OMAP24XX_IC_BASE, + .base_reg = IO_ADDRESS(OMAP24XX_IC_BASE), .nr_irqs = 96, }, { /* XXX: DSP INTC */ @@ -47,7 +47,7 @@ static struct omap_irq_bank { /* XXX: FIQ and additional INTC support (only MPU at the moment) */ static void omap_ack_irq(unsigned int irq) { - omap_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); + __raw_writel(0x1, irq_banks[0].base_reg + INTC_CONTROL); } static void omap_mask_irq(unsigned int irq) @@ -60,7 +60,7 @@ static void omap_mask_irq(unsigned int irq) irq %= 32; } - omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); + __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_SET0 + offset); } static void omap_unmask_irq(unsigned int irq) @@ -73,7 +73,7 @@ static void omap_unmask_irq(unsigned int irq) irq %= 32; } - omap_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); + __raw_writel(1 << irq, irq_banks[0].base_reg + INTC_MIR_CLEAR0 + offset); } static void omap_mask_ack_irq(unsigned int irq) @@ -93,17 +93,20 @@ static void __init omap_irq_bank_init_one(struct omap_irq_bank *bank) { unsigned long tmp; - tmp = omap_readl(bank->base_reg + INTC_REVISION) & 0xff; + tmp = __raw_readl(bank->base_reg + INTC_REVISION) & 0xff; printk(KERN_INFO "IRQ: Found an INTC at 0x%08lx " "(revision %ld.%ld) with %d interrupts\n", bank->base_reg, tmp >> 4, tmp & 0xf, bank->nr_irqs); - tmp = omap_readl(bank->base_reg + INTC_SYSCONFIG); + tmp = __raw_readl(bank->base_reg + INTC_SYSCONFIG); tmp |= 1 << 1; /* soft reset */ - omap_writel(tmp, bank->base_reg + INTC_SYSCONFIG); + __raw_writel(tmp, bank->base_reg + INTC_SYSCONFIG); - while (!(omap_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) + while (!(__raw_readl(bank->base_reg + INTC_SYSSTATUS) & 0x1)) /* Wait for reset to complete */; + + /* Enable autoidle */ + __raw_writel(1 << 0, bank->base_reg + INTC_SYSCONFIG); } void __init omap_init_irq(void) diff --git a/arch/arm/mach-omap2/memory.c b/arch/arm/mach-omap2/memory.c index 85cbc2a..3e5d8cd 100644 --- a/arch/arm/mach-omap2/memory.c +++ b/arch/arm/mach-omap2/memory.c @@ -30,6 +30,7 @@ #include "prcm-regs.h" #include "memory.h" + static struct memory_timings mem_timings; u32 omap2_memory_get_slow_dll_ctrl(void) @@ -99,3 +100,20 @@ void omap2_init_memory_params(u32 force_lock_to_unlock_mode) /* 90 degree phase for anything below 133Mhz + disable DLL filter */ mem_timings.slow_dll_ctrl |= ((1 << 1) | (3 << 8)); } + +/* turn on smart idle modes for SDRAM scheduler and controller */ +void __init omap2_init_memory(void) +{ + u32 l; + + l = SMS_SYSCONFIG; + l &= ~(0x3 << 3); + l |= (0x2 << 3); + SMS_SYSCONFIG = l; + + l = SDRC_SYSCONFIG; + l &= ~(0x3 << 3); + l |= (0x2 << 3); + SDRC_SYSCONFIG = l; + +} diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 0439906..0575097 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -53,8 +53,8 @@ MUX_CFG_24XX("W19_24XX_SYS_NIRQ", 0x12c, 0, 1, 1, 1) MUX_CFG_24XX("W14_24XX_SYS_CLKOUT", 0x137, 0, 1, 1, 1) /* 24xx GPMC chipselects, wait pin monitoring */ -MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1) -MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1) +MUX_CFG_24XX("E2_GPMC_NCS2", 0x08e, 0, 1, 1, 1) +MUX_CFG_24XX("L2_GPMC_NCS7", 0x093, 0, 1, 1, 1) MUX_CFG_24XX("L3_GPMC_WAIT0", 0x09a, 0, 1, 1, 1) MUX_CFG_24XX("N7_GPMC_WAIT1", 0x09b, 0, 1, 1, 1) MUX_CFG_24XX("M1_GPMC_WAIT2", 0x09c, 0, 1, 1, 1) @@ -67,18 +67,18 @@ MUX_CFG_24XX("W15_24XX_MCBSP2_DR", 0x126, 1, 1, 0, 1) MUX_CFG_24XX("V15_24XX_MCBSP2_DX", 0x127, 1, 1, 0, 1) /* 24xx GPIO */ -MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1) -MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1) -MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1) -MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1) -MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1) -MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1) -MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) -MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) +MUX_CFG_24XX("M21_242X_GPIO11", 0x0c9, 3, 1, 1, 1) +MUX_CFG_24XX("P21_242X_GPIO12", 0x0ca, 3, 0, 0, 1) +MUX_CFG_24XX("AA10_242X_GPIO13", 0x0e5, 3, 0, 0, 1) +MUX_CFG_24XX("AA6_242X_GPIO14", 0x0e6, 3, 0, 0, 1) +MUX_CFG_24XX("AA4_242X_GPIO15", 0x0e7, 3, 0, 0, 1) +MUX_CFG_24XX("Y11_242X_GPIO16", 0x0e8, 3, 0, 0, 1) +MUX_CFG_24XX("AA12_242X_GPIO17", 0x0e9, 3, 0, 0, 1) +MUX_CFG_24XX("AA8_242X_GPIO58", 0x0ea, 3, 0, 0, 1) MUX_CFG_24XX("Y20_24XX_GPIO60", 0x12c, 3, 0, 0, 1) -MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) +MUX_CFG_24XX("W4__24XX_GPIO74", 0x0f2, 3, 0, 0, 1) MUX_CFG_24XX("M15_24XX_GPIO92", 0x10a, 3, 0, 0, 1) -MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1) +MUX_CFG_24XX("J15_24XX_GPIO99", 0x113, 3, 1, 1, 1) MUX_CFG_24XX("V14_24XX_GPIO117", 0x128, 3, 1, 0, 1) MUX_CFG_24XX("P14_24XX_GPIO125", 0x140, 3, 1, 1, 1) @@ -95,17 +95,17 @@ MUX_CFG_24XX("T3_242X_GPIO55", 0xd9, 3, 0, 0, 1) MUX_CFG_24XX("U2_242X_GPIO56", 0xda, 3, 0, 0, 1) /* 24xx external DMA requests */ -MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1) -MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1) -MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1) -MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1) -MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) -MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) +MUX_CFG_24XX("AA10_242X_DMAREQ0", 0x0e5, 2, 0, 0, 1) +MUX_CFG_24XX("AA6_242X_DMAREQ1", 0x0e6, 2, 0, 0, 1) +MUX_CFG_24XX("E4_242X_DMAREQ2", 0x074, 2, 0, 0, 1) +MUX_CFG_24XX("G4_242X_DMAREQ3", 0x073, 2, 0, 0, 1) +MUX_CFG_24XX("D3_242X_DMAREQ4", 0x072, 2, 0, 0, 1) +MUX_CFG_24XX("E3_242X_DMAREQ5", 0x071, 2, 0, 0, 1) /* TSC IRQ */ MUX_CFG_24XX("P20_24XX_TSC_IRQ", 0x108, 0, 0, 0, 1) -/* UART3 */ +/* UART3 */ MUX_CFG_24XX("K15_24XX_UART3_TX", 0x118, 0, 0, 0, 1) MUX_CFG_24XX("K14_24XX_UART3_RX", 0x119, 0, 0, 0, 1) diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c new file mode 100644 index 0000000..80bb42e --- /dev/null +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -0,0 +1,349 @@ +/* + * linux/arch/arm/mach-omap2/usb-tusb6010.c + * + * Copyright (C) 2006 Nokia Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <linux/usb/musb.h> + +#include <asm/arch/gpmc.h> +#include <asm/arch/gpio.h> +#include <asm/arch/mux.h> + + +static u8 async_cs, sync_cs; +static unsigned refclk_psec; + + +/* t2_ps, when quantized to fclk units, must happen no earlier than + * the clock after after t1_NS. + * + * Return a possibly updated value of t2_ps, converted to nsec. + */ +static unsigned +next_clk(unsigned t1_NS, unsigned t2_ps, unsigned fclk_ps) +{ + unsigned t1_ps = t1_NS * 1000; + unsigned t1_f, t2_f; + + if ((t1_ps + fclk_ps) < t2_ps) + return t2_ps / 1000; + + t1_f = (t1_ps + fclk_ps - 1) / fclk_ps; + t2_f = (t2_ps + fclk_ps - 1) / fclk_ps; + + if (t1_f >= t2_f) + t2_f = t1_f + 1; + + return (t2_f * fclk_ps) / 1000; +} + +/* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ + +static int tusb_set_async_mode(unsigned sysclk_ps, unsigned fclk_ps) +{ + struct gpmc_timings t; + unsigned t_acsnh_advnh = sysclk_ps + 3000; + unsigned tmp; + + memset(&t, 0, sizeof(t)); + + /* CS_ON = t_acsnh_acsnl */ + t.cs_on = 8; + /* ADV_ON = t_acsnh_advnh - t_advn */ + t.adv_on = next_clk(t.cs_on, t_acsnh_advnh - 7000, fclk_ps); + + /* + * READ ... from omap2420 TRM fig 12-13 + */ + + /* ADV_RD_OFF = t_acsnh_advnh */ + t.adv_rd_off = next_clk(t.adv_on, t_acsnh_advnh, fclk_ps); + + /* OE_ON = t_acsnh_advnh + t_advn_oen (then wait for nRDY) */ + t.oe_on = next_clk(t.adv_on, t_acsnh_advnh + 1000, fclk_ps); + + /* ACCESS = counters continue only after nRDY */ + tmp = t.oe_on * 1000 + 300; + t.access = next_clk(t.oe_on, tmp, fclk_ps); + + /* OE_OFF = after data gets sampled */ + tmp = t.access * 1000; + t.oe_off = next_clk(t.access, tmp, fclk_ps); + + t.cs_rd_off = t.oe_off; + + tmp = t.cs_rd_off * 1000 + 7000 /* t_acsn_rdy_z */; + t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); + + /* + * WRITE ... from omap2420 TRM fig 12-15 + */ + + /* ADV_WR_OFF = t_acsnh_advnh */ + t.adv_wr_off = t.adv_rd_off; + + /* WE_ON = t_acsnh_advnh + t_advn_wen (then wait for nRDY) */ + t.we_on = next_clk(t.adv_wr_off, t_acsnh_advnh + 1000, fclk_ps); + + /* WE_OFF = after data gets sampled */ + tmp = t.we_on * 1000 + 300; + t.we_off = next_clk(t.we_on, tmp, fclk_ps); + + t.cs_wr_off = t.we_off; + + tmp = t.cs_wr_off * 1000 + 7000 /* t_acsn_rdy_z */; + t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); + + return gpmc_cs_set_timings(async_cs, &t); +} + +static int tusb_set_sync_mode(unsigned sysclk_ps, unsigned fclk_ps) +{ + struct gpmc_timings t; + unsigned t_scsnh_advnh = sysclk_ps + 3000; + unsigned tmp; + + memset(&t, 0, sizeof(t)); + t.cs_on = 8; + + /* ADV_ON = t_acsnh_advnh - t_advn */ + t.adv_on = next_clk(t.cs_on, t_scsnh_advnh - 7000, fclk_ps); + + /* GPMC_CLK rate = fclk rate / div */ + t.sync_clk = 12 /* 11.1 nsec */; + tmp = (t.sync_clk * 1000 + fclk_ps - 1) / fclk_ps; + if (tmp > 4) + return -ERANGE; + if (tmp <= 0) + tmp = 1; + t.page_burst_access = (fclk_ps * tmp) / 1000; + + /* + * READ ... based on omap2420 TRM fig 12-19, 12-20 + */ + + /* ADV_RD_OFF = t_scsnh_advnh */ + t.adv_rd_off = next_clk(t.adv_on, t_scsnh_advnh, fclk_ps); + + /* OE_ON = t_scsnh_advnh + t_advn_oen * fclk_ps (then wait for nRDY) */ + tmp = (t.adv_rd_off * 1000) + (3 * fclk_ps); + t.oe_on = next_clk(t.adv_on, tmp, fclk_ps); + + /* ACCESS = number of clock cycles after t_adv_eon */ + tmp = (t.oe_on * 1000) + (5 * fclk_ps); + t.access = next_clk(t.oe_on, tmp, fclk_ps); + + /* OE_OFF = after data gets sampled */ + tmp = (t.access * 1000) + (1 * fclk_ps); + t.oe_off = next_clk(t.access, tmp, fclk_ps); + + t.cs_rd_off = t.oe_off; + + tmp = t.cs_rd_off * 1000 + 7000 /* t_scsn_rdy_z */; + t.rd_cycle = next_clk(t.cs_rd_off, tmp, fclk_ps); + + /* + * WRITE ... based on omap2420 TRM fig 12-21 + */ + + /* ADV_WR_OFF = t_scsnh_advnh */ + t.adv_wr_off = t.adv_rd_off; + + /* WE_ON = t_scsnh_advnh + t_advn_wen * fclk_ps (then wait for nRDY) */ + tmp = (t.adv_wr_off * 1000) + (3 * fclk_ps); + t.we_on = next_clk(t.adv_wr_off, tmp, fclk_ps); + + /* WE_OFF = number of clock cycles after t_adv_wen */ + tmp = (t.we_on * 1000) + (6 * fclk_ps); + t.we_off = next_clk(t.we_on, tmp, fclk_ps); + + t.cs_wr_off = t.we_off; + + tmp = t.cs_wr_off * 1000 + 7000 /* t_scsn_rdy_z */; + t.wr_cycle = next_clk(t.cs_wr_off, tmp, fclk_ps); + + return gpmc_cs_set_timings(sync_cs, &t); +} + +extern unsigned long gpmc_get_fclk_period(void); + +/* tusb driver calls this when it changes the chip's clocking */ +int tusb6010_platform_retime(unsigned is_refclk) +{ + static const char error[] = + KERN_ERR "tusb6010 %s retime error %d\n"; + + unsigned fclk_ps = gpmc_get_fclk_period(); + unsigned sysclk_ps; + int status; + + if (!refclk_psec) + return -ENODEV; + + sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60; + + status = tusb_set_async_mode(sysclk_ps, fclk_ps); + if (status < 0) { + printk(error, "async", status); + goto done; + } + status = tusb_set_sync_mode(sysclk_ps, fclk_ps); + if (status < 0) + printk(error, "sync", status); +done: + return status; +} +EXPORT_SYMBOL_GPL(tusb6010_platform_retime); + +static struct resource tusb_resources[] = { + /* Order is significant! The start/end fields + * are updated during setup.. + */ + { /* Asynchronous access */ + .flags = IORESOURCE_MEM, + }, + { /* Synchronous access */ + .flags = IORESOURCE_MEM, + }, + { /* IRQ */ + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 tusb_dmamask = ~(u32)0; + +static struct platform_device tusb_device = { + .name = "musb_hdrc", + .id = -1, + .dev = { + .dma_mask = &tusb_dmamask, + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(tusb_resources), + .resource = tusb_resources, +}; + + +/* this may be called only from board-*.c setup code */ +int __init +tusb6010_setup_interface(struct musb_hdrc_platform_data *data, + unsigned ps_refclk, unsigned waitpin, + unsigned async, unsigned sync, + unsigned irq, unsigned dmachan) +{ + int status; + static char error[] __initdata = + KERN_ERR "tusb6010 init error %d, %d\n"; + + /* ASYNC region, primarily for PIO */ + status = gpmc_cs_request(async, SZ_16M, (unsigned long *) + &tusb_resources[0].start); + if (status < 0) { + printk(error, 1, status); + return status; + } + tusb_resources[0].end = tusb_resources[0].start + 0x9ff; + async_cs = async; + gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, + GPMC_CONFIG1_PAGE_LEN(2) + | GPMC_CONFIG1_WAIT_READ_MON + | GPMC_CONFIG1_WAIT_WRITE_MON + | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) + | GPMC_CONFIG1_READTYPE_ASYNC + | GPMC_CONFIG1_WRITETYPE_ASYNC + | GPMC_CONFIG1_DEVICESIZE_16 + | GPMC_CONFIG1_DEVICETYPE_NOR + | GPMC_CONFIG1_MUXADDDATA); + + + /* SYNC region, primarily for DMA */ + status = gpmc_cs_request(sync, SZ_16M, (unsigned long *) + &tusb_resources[1].start); + if (status < 0) { + printk(error, 2, status); + return status; + } + tusb_resources[1].end = tusb_resources[1].start + 0x9ff; + sync_cs = sync; + gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, + GPMC_CONFIG1_READMULTIPLE_SUPP + | GPMC_CONFIG1_READTYPE_SYNC + | GPMC_CONFIG1_WRITEMULTIPLE_SUPP + | GPMC_CONFIG1_WRITETYPE_SYNC + | GPMC_CONFIG1_CLKACTIVATIONTIME(1) + | GPMC_CONFIG1_PAGE_LEN(2) + | GPMC_CONFIG1_WAIT_READ_MON + | GPMC_CONFIG1_WAIT_WRITE_MON + | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) + | GPMC_CONFIG1_DEVICESIZE_16 + | GPMC_CONFIG1_DEVICETYPE_NOR + | GPMC_CONFIG1_MUXADDDATA + /* fclk divider gets set later */ + ); + + /* IRQ */ + status = omap_request_gpio(irq); + if (status < 0) { + printk(error, 3, status); + return status; + } + omap_set_gpio_direction(irq, 1); + tusb_resources[2].start = irq + IH_GPIO_BASE; + + /* set up memory timings ... can speed them up later */ + if (!ps_refclk) { + printk(error, 4, status); + return -ENODEV; + } + refclk_psec = ps_refclk; + status = tusb6010_platform_retime(1); + if (status < 0) { + printk(error, 5, status); + return status; + } + + /* finish device setup ... */ + if (!data) { + printk(error, 6, status); + return -ENODEV; + } + data->multipoint = 1; + tusb_device.dev.platform_data = data; + + /* REVISIT let the driver know what DMA channels work */ + if (!dmachan) + tusb_device.dev.dma_mask = NULL; + else { + /* assume OMAP 2420 ES2.0 and later */ + if (dmachan & (1 << 0)) + omap_cfg_reg(AA10_242X_DMAREQ0); + if (dmachan & (1 << 1)) + omap_cfg_reg(AA6_242X_DMAREQ1); + if (dmachan & (1 << 2)) + omap_cfg_reg(E4_242X_DMAREQ2); + if (dmachan & (1 << 3)) + omap_cfg_reg(G4_242X_DMAREQ3); + if (dmachan & (1 << 4)) + omap_cfg_reg(D3_242X_DMAREQ4); + if (dmachan & (1 << 5)) + omap_cfg_reg(E3_242X_DMAREQ5); + } + + /* so far so good ... register the device */ + status = platform_device_register(&tusb_device); + if (status < 0) { + printk(error, 7, status); + return status; + } + return 0; +} |