diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-04 19:31:18 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-05-04 19:31:18 (GMT) |
commit | 6fa52ed33bea997374a88dbacbba5bf8c7ac4fef (patch) | |
tree | a0904b78d66c9b99d6acf944cf58bcaa0cffc511 /arch/arm/mach-omap2 | |
parent | 1db772216f48978d5146b858586f6178433aad38 (diff) | |
parent | bc8fd900c4d460b4e4bf785bb48bfced0ac9941b (diff) | |
download | linux-fsl-qoriq-6fa52ed33bea997374a88dbacbba5bf8c7ac4fef.tar.xz |
Merge tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC driver changes from Olof Johansson:
"This is a rather large set of patches for device drivers that for one
reason or another the subsystem maintainer preferred to get merged
through the arm-soc tree. There are both new drivers as well as
existing drivers that are getting converted from platform-specific
code into standalone drivers using the appropriate subsystem specific
interfaces.
In particular, we can now have pinctrl, clk, clksource and irqchip
drivers in one file per driver, without the need to call into platform
specific interface, or to get called from platform specific code, as
long as all information about the hardware is provided through a
device tree.
Most of the drivers we touch this time are for clocksource. Since now
most of them are part of drivers/clocksource, I expect that we won't
have to touch these again from arm-soc and can let the clocksource
maintainers take care of these in the future.
Another larger part of this series is specific to the exynos platform,
which is seeing some significant effort in upstreaming and
modernization of its device drivers this time around, which
unfortunately is also the cause for the churn and a lot of the merge
conflicts.
There is one new subsystem that gets merged as part of this series:
the reset controller interface, which is a very simple interface for
taking devices on the SoC out of reset or back into reset. Patches to
use this interface on i.MX follow later in this merge window, and we
are going to have other platforms (at least tegra and sirf) get
converted in 3.11. This will let us get rid of platform specific
callbacks in a number of platform independent device drivers."
* tag 'drivers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (256 commits)
irqchip: s3c24xx: add missing __init annotations
ARM: dts: Disable the RTC by default on exynos5
clk: exynos5250: Fix parent clock for sclk_mmc{0,1,2,3}
ARM: exynos: restore mach/regs-clock.h for exynos5
clocksource: exynos_mct: fix build error on non-DT
pinctrl: vt8500: wmt: Fix checking return value of pinctrl_register()
irqchip: vt8500: Convert arch-vt8500 to new irqchip infrastructure
reset: NULL deref on allocation failure
reset: Add reset controller API
dt: describe base reset signal binding
ARM: EXYNOS: Add arm-pmu DT binding for exynos421x
ARM: EXYNOS: Add arm-pmu DT binding for exynos5250
ARM: EXYNOS: Enable PMUs for exynos4
irqchip: exynos-combiner: Correct combined IRQs for exynos4
irqchip: exynos-combiner: Add set_irq_affinity function for combiner_irq
ARM: EXYNOS: fix compilation error introduced due to common clock migration
clk: exynos5250: Fix divider values for sclk_mmc{0,1,2,3}
clk: exynos4: export clocks required for fimc-is
clk: samsung: Fix compilation error
clk: tegra: fix enum tegra114_clk to match binding
...
Diffstat (limited to 'arch/arm/mach-omap2')
27 files changed, 995 insertions, 510 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 2612eea..a4d4664 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -445,16 +445,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -606,6 +613,8 @@ static void __init omap_3430sdp_init(void) board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index 67447bd..20d6d81 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -53,16 +53,23 @@ static void enable_board_wakeup_source(void) OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 126, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = 61, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 126, - .reset_gpio_port[1] = 61, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -199,6 +206,8 @@ static void __init omap_sdp_init(void) board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16); enable_board_wakeup_source(); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 7d3358b..fc53911 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -47,15 +47,17 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_USB_NRESET, + .vcc_gpio = GPIO_USB_POWER, + .vcc_polarity = 1, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = GPIO_USB_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; static struct mtd_partition crane_nand_partitions[] = { @@ -131,13 +133,7 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, - "usb_ehci_enable"); - if (ret < 0) { - pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); - return; - } - + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am35xx_emac_init(AM35XX_DEFAULT_MDIO_FREQUENCY, 1); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 1d6c288..c29d2e7 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -273,6 +273,14 @@ static __init void am3517_evm_mcbsp1_init(void) omap_ctrl_writel(devconf0, OMAP2_CONTROL_DEVCONF0); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = 57, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ @@ -281,12 +289,6 @@ static struct usbhs_omap_platform_data usbhs_bdata __initdata = { #else .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, #endif - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = 57, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -348,7 +350,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; - static void __init am3517_evm_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -360,6 +361,8 @@ static void __init am3517_evm_init(void) /* Configure GPIO for EHCI port */ omap_mux_init_gpio(57, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); am3517_evm_hecc_init(&am3517_evm_hecc_pdata); /* DSS */ diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index bccd3e5..e0ed8c0 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -418,15 +418,22 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = OMAP_MAX_GPIO_LINES + 6, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = OMAP_MAX_GPIO_LINES + 7, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = OMAP_MAX_GPIO_LINES + 6, - .reset_gpio_port[1] = OMAP_MAX_GPIO_LINES + 7, - .reset_gpio_port[2] = -EINVAL }; static void __init cm_t35_init_usbh(void) @@ -443,6 +450,7 @@ static void __init cm_t35_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a66da80..4eb5e6f 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -188,15 +188,22 @@ static inline void cm_t3517_init_rtc(void) {} #define HSUSB2_RESET_GPIO (147) #define USB_HUB_RESET_GPIO (152) +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = HSUSB1_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, + { + .port = 2, + .reset_gpio = HSUSB2_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data cm_t3517_ehci_pdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = HSUSB1_RESET_GPIO, - .reset_gpio_port[1] = HSUSB2_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static int __init cm_t3517_init_usbh(void) @@ -213,6 +220,7 @@ static int __init cm_t3517_init_usbh(void) msleep(1); } + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&cm_t3517_ehci_pdata); return 0; @@ -324,6 +332,6 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .handle_irq = omap3_intc_handle_irq, .init_machine = cm_t3517_init, .init_late = am35xx_init_late, - .init_time = omap3_gp_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .restart = omap3xxx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 12d2126..e44b804 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -436,15 +436,7 @@ static struct platform_device *devkit8000_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index e54a480..78813b3 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -140,7 +140,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM33XX (Flattened Device Tree)") .init_irq = omap_intc_of_init, .handle_irq = omap3_intc_handle_irq, .init_machine = omap_generic_init, - .init_time = omap3_am33xx_gptimer_timer_init, + .init_time = omap3_gptimer_timer_init, .dt_compat = am33xx_boards_compat, .restart = am33xx_restart, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index e979d48..b54562d 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -527,26 +527,28 @@ static void __init igep_i2c_init(void) omap3_pmic_init("twl4030", &igep_twldata); } +static struct usbhs_phy_data igep2_phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = IGEP2_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + +static struct usbhs_phy_data igep3_phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = IGEP3_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = IGEP2_GPIO_USBH_NRESET, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL, }; static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -642,8 +644,10 @@ static void __init igep_init(void) if (machine_is_igep0020()) { omap_display_init(&igep2_dss_data); igep2_init_smsc911x(); + usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); usbhs_init(&igep2_usbhs_bdata); } else { + usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data)); usbhs_init(&igep3_usbhs_bdata); } } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index fff1413..6de7860 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -33,6 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mmc/host.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> @@ -277,6 +278,21 @@ static struct regulator_consumer_supply beagle_vsim_supply[] = { static struct gpio_led gpio_leds[]; +/* PHY's VCC regulator might be added later, so flag that we need it */ +static struct nop_usb_xceiv_platform_data hsusb2_phy_data = { + .needs_vcc = true, +}; + +static struct usbhs_phy_data phy_data[] = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -1, /* updated in beagle_twl_gpio_setup */ + .vcc_polarity = 1, /* updated in beagle_twl_gpio_setup */ + .platform_data = &hsusb2_phy_data, + }, +}; + static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -318,9 +334,11 @@ static int beagle_twl_gpio_setup(struct device *dev, } dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, - "nEN_USB_PWR"); + /* TWL4030_GPIO_MAX i.e. LED_GPO controls HS USB Port 2 power */ + phy_data[0].vcc_gpio = gpio + TWL4030_GPIO_MAX; + phy_data[0].vcc_polarity = beagle_config.usb_pwr_level; + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); return 0; } @@ -453,15 +471,7 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -543,7 +553,9 @@ static void __init omap3_beagle_init(void) usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + usbhs_init(&usbhs_bdata); + board_nand_init(omap3beagle_nand_partitions, ARRAY_SIZE(omap3beagle_nand_partitions), NAND_CS, NAND_BUSWIDTH_16, NULL); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 233a0d5..4f1bbc3 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -496,7 +496,7 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { static struct regulator_consumer_supply omap3evm_vaux2_supplies[] = { REGULATOR_SUPPLY("VDD_CSIPHY1", "omap3isp"), /* OMAP ISP */ REGULATOR_SUPPLY("VDD_CSIPHY2", "omap3isp"), /* OMAP ISP */ - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ REGULATOR_SUPPLY("vaux2", NULL), }; @@ -539,17 +539,16 @@ static int __init omap3_evm_i2c_init(void) return 0; } -static struct usbhs_omap_platform_data usbhs_bdata __initdata = { +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = -1, /* set at runtime */ + .vcc_gpio = -EINVAL, + }, +}; - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, +static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - /* PHY reset GPIO will be runtime programmed based on EVM version */ - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -725,7 +724,7 @@ static void __init omap3_evm_init(void) /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); - usbhs_bdata.reset_gpio_port[1] = 21; + phy_data[0].reset_gpio = 21; /* EVM REV >= E can supply 500mA with EXTVBUS programming */ musb_board_data.power = 500; @@ -733,10 +732,12 @@ static void __init omap3_evm_init(void) } else { /* setup EHCI phy reset on MDC */ omap_mux_init_gpio(135, OMAP_PIN_OUTPUT); - usbhs_bdata.reset_gpio_port[1] = 135; + phy_data[0].reset_gpio = 135; } usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(&musb_board_data); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3evm_nand_partitions, ARRAY_SIZE(omap3evm_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2bba362..1004d2a 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -346,7 +346,7 @@ static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { }; static struct regulator_consumer_supply pandora_usb_phy_supply[] = { - REGULATOR_SUPPLY("hsusb1", "ehci-omap.0"), + REGULATOR_SUPPLY("vcc", "nop_usb_xceiv.2"), /* hsusb port 2 */ }; /* ads7846 on SPI and 2 nub controllers on I2C */ @@ -561,6 +561,14 @@ fail: printk(KERN_ERR "wl1251 board initialisation failed\n"); } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 16, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3pandora_devices[] __initdata = { &pandora_leds_gpio, &pandora_keys_gpio, @@ -569,15 +577,7 @@ static struct platform_device *omap3pandora_devices[] __initdata = { }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 16, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -601,7 +601,10 @@ static void __init omap3pandora_init(void) spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); + usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data, NULL); diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 495b989..8afbba0 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -357,19 +357,20 @@ static int __init omap3_stalker_i2c_init(void) #define OMAP3_STALKER_TS_GPIO 175 +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 21, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_stalker_devices[] __initdata = { &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 21, - .reset_gpio_port[2] = -EINVAL, }; #ifdef CONFIG_OMAP_MUX @@ -406,6 +407,8 @@ static void __init omap3_stalker_init(void) omap_sdrc_init(mt46h32m32lf6_sdrc_params, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index bcd44fb..7da48bc 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -305,21 +305,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = 147, + .vcc_gpio = -EINVAL, + }, +}; + static struct platform_device *omap3_touchbook_devices[] __initdata = { &leds_gpio, &keys_gpio, }; static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = 147, - .reset_gpio_port[2] = -EINVAL }; static void omap3_touchbook_poweroff(void) @@ -368,6 +369,8 @@ static void __init omap3_touchbook_init(void) omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); board_nand_init(omap3touchbook_nand_partitions, ARRAY_SIZE(omap3touchbook_nand_partitions), NAND_CS, diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index b02c2f0..a71ad34 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -31,6 +31,7 @@ #include <linux/ti_wilink_st.h> #include <linux/usb/musb.h> #include <linux/usb/phy.h> +#include <linux/usb/nop-usb-xceiv.h> #include <linux/wl12xx.h> #include <linux/irqchip/arm-gic.h> #include <linux/platform_data/omap-abe-twl6040.h> @@ -132,6 +133,22 @@ static struct platform_device btwilink_device = { .id = -1, }; +/* PHY device on HS USB Port 1 i.e. nop_usb_xceiv.1 */ +static struct nop_usb_xceiv_platform_data hsusb1_phy_data = { + /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ + .clk_rate = 19200000, +}; + +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 1, + .reset_gpio = GPIO_HUB_NRESET, + .vcc_gpio = GPIO_HUB_POWER, + .vcc_polarity = 1, + .platform_data = &hsusb1_phy_data, + }, +}; + static struct platform_device *panda_devices[] __initdata = { &leds_gpio, &wl1271_device, @@ -142,49 +159,19 @@ static struct platform_device *panda_devices[] __initdata = { static struct usbhs_omap_platform_data usbhs_bdata __initdata = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = false, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = -EINVAL, - .reset_gpio_port[2] = -EINVAL -}; - -static struct gpio panda_ehci_gpios[] __initdata = { - { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, - { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, }; static void __init omap4_ehci_init(void) { int ret; - struct clk *phy_ref_clk; /* FREF_CLK3 provides the 19.2 MHz reference clock to the PHY */ - phy_ref_clk = clk_get(NULL, "auxclk3_ck"); - if (IS_ERR(phy_ref_clk)) { - pr_err("Cannot request auxclk3\n"); - return; - } - clk_set_rate(phy_ref_clk, 19200000); - clk_prepare_enable(phy_ref_clk); - - /* disable the power to the usb hub prior to init and reset phy+hub */ - ret = gpio_request_array(panda_ehci_gpios, - ARRAY_SIZE(panda_ehci_gpios)); - if (ret) { - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } - - gpio_export(GPIO_HUB_POWER, 0); - gpio_export(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 1); + ret = clk_add_alias("main_clk", "nop_usb_xceiv.1", "auxclk3_ck", NULL); + if (ret) + pr_err("Failed to add main_clk alias to auxclk3_ck\n"); + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); - - /* enable power to hub */ - gpio_set_value(GPIO_HUB_POWER, 1); } static struct omap_musb_board_data musb_board_data = { diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 6308332..f910140 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -457,14 +457,16 @@ static int __init overo_spi_init(void) return 0; } +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = OVERO_GPIO_USBH_NRESET, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = OVERO_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL }; #ifdef CONFIG_OMAP_MUX @@ -501,6 +503,8 @@ static void __init overo_init(void) ARRAY_SIZE(overo_nand_partitions), NAND_CS, 0, NULL); usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); usb_musb_init(NULL); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_init_smsc911x(); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 5e4d4c9..1a3dd86 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -92,14 +92,16 @@ static struct mtd_partition zoom_nand_partitions[] = { }, }; +static struct usbhs_phy_data phy_data[] __initdata = { + { + .port = 2, + .reset_gpio = ZOOM3_EHCI_RESET_GPIO, + .vcc_gpio = -EINVAL, + }, +}; + static struct usbhs_omap_platform_data usbhs_bdata __initdata = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO, - .reset_gpio_port[2] = -EINVAL, }; static void __init omap_zoom_init(void) @@ -109,6 +111,8 @@ static void __init omap_zoom_init(void) } else if (machine_is_omap_zoom3()) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBP); omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT); + + usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data)); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/common.h b/arch/arm/mach-omap2/common.h index df00e75..d555cf2 100644 --- a/arch/arm/mach-omap2/common.h +++ b/arch/arm/mach-omap2/common.h @@ -82,8 +82,7 @@ extern void omap2_init_common_infrastructure(void); extern void omap2_sync32k_timer_init(void); extern void omap3_sync32k_timer_init(void); extern void omap3_secure_sync32k_timer_init(void); -extern void omap3_gp_gptimer_timer_init(void); -extern void omap3_am33xx_gptimer_timer_init(void); +extern void omap3_gptimer_timer_init(void); extern void omap4_local_timer_init(void); extern void omap5_realtime_timer_init(void); diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index afc1e8c..d9c2719 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -74,14 +74,6 @@ static int omap2_nand_gpmc_retime( t.cs_wr_off = gpmc_t->cs_wr_off; t.wr_cycle = gpmc_t->wr_cycle; - /* Configure GPMC */ - if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 1); - else - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_DEV_SIZE, 0); - gpmc_cs_configure(gpmc_nand_data->cs, - GPMC_CONFIG_DEV_TYPE, GPMC_DEVICETYPE_NAND); - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_WP, 0); err = gpmc_cs_set_timings(gpmc_nand_data->cs, &t); if (err) return err; @@ -115,14 +107,18 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, struct gpmc_timings *gpmc_t) { int err = 0; + struct gpmc_settings s; struct device *dev = &gpmc_nand_device.dev; + memset(&s, 0, sizeof(struct gpmc_settings)); + gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, (unsigned long *)&gpmc_nand_resource[0].start); if (err < 0) { - dev_err(dev, "Cannot request GPMC CS\n"); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_nand_data->cs, err); return err; } @@ -140,11 +136,31 @@ int gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data, dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; } - } - /* Enable RD PIN Monitoring Reg */ - if (gpmc_nand_data->dev_ready) { - gpmc_cs_configure(gpmc_nand_data->cs, GPMC_CONFIG_RDY_BSY, 1); + if (gpmc_nand_data->of_node) { + gpmc_read_settings_dt(gpmc_nand_data->of_node, &s); + } else { + s.device_nand = true; + + /* Enable RD PIN Monitoring Reg */ + if (gpmc_nand_data->dev_ready) { + s.wait_on_read = true; + s.wait_on_write = true; + } + } + + if (gpmc_nand_data->devsize == NAND_BUSWIDTH_16) + s.device_width = GPMC_DEVWIDTH_16BIT; + else + s.device_width = GPMC_DEVWIDTH_8BIT; + + err = gpmc_cs_program_settings(gpmc_nand_data->cs, &s); + if (err < 0) + goto out_free_cs; + + err = gpmc_configure(GPMC_CONFIG_WP, 0); + if (err < 0) + goto out_free_cs; } gpmc_update_nand_reg(&gpmc_nand_data->reg, gpmc_nand_data->cs); diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c index 0d75889..64b5a83 100644 --- a/arch/arm/mach-omap2/gpmc-onenand.c +++ b/arch/arm/mach-omap2/gpmc-onenand.c @@ -47,11 +47,23 @@ static struct platform_device gpmc_onenand_device = { .resource = &gpmc_onenand_resource, }; -static struct gpmc_timings omap2_onenand_calc_async_timings(void) +static struct gpmc_settings onenand_async = { + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings onenand_sync = { + .burst_read = true, + .burst_wrap = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, + .wait_pin = 0, +}; + +static void omap2_onenand_calc_async_timings(struct gpmc_timings *t) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; - const int t_cer = 15; const int t_avdp = 12; const int t_aavdh = 7; @@ -64,7 +76,6 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; dev_t.t_avdp_r = max_t(int, t_avdp, t_cer) * 1000; dev_t.t_avdp_w = dev_t.t_avdp_r; dev_t.t_aavdh = t_aavdh * 1000; @@ -76,19 +87,7 @@ static struct gpmc_timings omap2_onenand_calc_async_timings(void) dev_t.t_wpl = t_wpl * 1000; dev_t.t_wph = t_wph * 1000; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_async_mode(int cs, struct gpmc_timings *t) -{ - /* Configure GPMC for asynchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_async, &dev_t); } static void omap2_onenand_set_async_mode(void __iomem *onenand_base) @@ -158,12 +157,11 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg, return freq; } -static struct gpmc_timings -omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, - int freq) +static void omap2_onenand_calc_sync_timings(struct gpmc_timings *t, + unsigned int flags, + int freq) { struct gpmc_device_timings dev_t; - struct gpmc_timings t; const int t_cer = 15; const int t_avdp = 12; const int t_cez = 20; /* max of t_cez, t_oez */ @@ -172,9 +170,9 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo; int div, gpmc_clk_ns; - if (cfg->flags & ONENAND_SYNC_READ) + if (flags & ONENAND_SYNC_READ) onenand_flags = ONENAND_FLAG_SYNCREAD; - else if (cfg->flags & ONENAND_SYNC_READWRITE) + else if (flags & ONENAND_SYNC_READWRITE) onenand_flags = ONENAND_FLAG_SYNCREAD | ONENAND_FLAG_SYNCWRITE; switch (freq) { @@ -239,10 +237,11 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, /* Set synchronous read timings */ memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; + if (onenand_flags & ONENAND_FLAG_SYNCREAD) + onenand_sync.sync_read = true; if (onenand_flags & ONENAND_FLAG_SYNCWRITE) { - dev_t.sync_write = true; + onenand_sync.sync_write = true; + onenand_sync.burst_write = true; } else { dev_t.t_avdp_w = max(t_avdp, t_cer) * 1000; dev_t.t_wpl = t_wpl * 1000; @@ -265,32 +264,7 @@ omap2_onenand_calc_sync_timings(struct omap_onenand_platform_data *cfg, dev_t.cyc_aavdh_oe = 1; dev_t.t_rdyo = t_rdyo * 1000 + min_gpmc_clk_period; - gpmc_calc_timings(&t, &dev_t); - - return t; -} - -static int gpmc_set_sync_mode(int cs, struct gpmc_timings *t) -{ - unsigned sync_read = onenand_flags & ONENAND_FLAG_SYNCREAD; - unsigned sync_write = onenand_flags & ONENAND_FLAG_SYNCWRITE; - - /* Configure GPMC for synchronous read */ - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, - GPMC_CONFIG1_WRAPBURST_SUPP | - GPMC_CONFIG1_READMULTIPLE_SUPP | - (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) | - (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) | - (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) | - GPMC_CONFIG1_PAGE_LEN(2) | - (cpu_is_omap34xx() ? 0 : - (GPMC_CONFIG1_WAIT_READ_MON | - GPMC_CONFIG1_WAIT_PIN_SEL(0))) | - GPMC_CONFIG1_DEVICESIZE_16 | - GPMC_CONFIG1_DEVICETYPE_NOR | - GPMC_CONFIG1_MUXADDDATA); - - return gpmc_cs_set_timings(cs, t); + gpmc_calc_timings(t, &onenand_sync, &dev_t); } static int omap2_onenand_setup_async(void __iomem *onenand_base) @@ -298,11 +272,19 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base) struct gpmc_timings t; int ret; + if (gpmc_onenand_data->of_node) + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_async); + omap2_onenand_set_async_mode(onenand_base); - t = omap2_onenand_calc_async_timings(); + omap2_onenand_calc_async_timings(&t); + + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async); + if (ret < 0) + return ret; - ret = gpmc_set_async_mode(gpmc_onenand_data->cs, &t); + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); if (ret < 0) return ret; @@ -322,9 +304,25 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr) set_onenand_cfg(onenand_base); } - t = omap2_onenand_calc_sync_timings(gpmc_onenand_data, freq); + if (gpmc_onenand_data->of_node) { + gpmc_read_settings_dt(gpmc_onenand_data->of_node, + &onenand_sync); + } else { + /* + * FIXME: Appears to be legacy code from initial ONENAND commit. + * Unclear what boards this is for and if this can be removed. + */ + if (!cpu_is_omap34xx()) + onenand_sync.wait_on_read = true; + } - ret = gpmc_set_sync_mode(gpmc_onenand_data->cs, &t); + omap2_onenand_calc_sync_timings(&t, gpmc_onenand_data->flags, freq); + + ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_sync); + if (ret < 0) + return ret; + + ret = gpmc_cs_set_timings(gpmc_onenand_data->cs, &t); if (ret < 0) return ret; @@ -359,6 +357,7 @@ static int gpmc_onenand_setup(void __iomem *onenand_base, int *freq_ptr) void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) { int err; + struct device *dev = &gpmc_onenand_device.dev; gpmc_onenand_data = _onenand_data; gpmc_onenand_data->onenand_setup = gpmc_onenand_setup; @@ -366,7 +365,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) if (cpu_is_omap24xx() && (gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) { - printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n"); + dev_warn(dev, "OneNAND using only SYNC_READ on 24xx\n"); gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE; gpmc_onenand_data->flags |= ONENAND_SYNC_READ; } @@ -379,7 +378,8 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) err = gpmc_cs_request(gpmc_onenand_data->cs, ONENAND_IO_SIZE, (unsigned long *)&gpmc_onenand_resource.start); if (err < 0) { - pr_err("%s: Cannot request GPMC CS\n", __func__); + dev_err(dev, "Cannot request GPMC CS %d, error %d\n", + gpmc_onenand_data->cs, err); return; } @@ -387,7 +387,7 @@ void gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data) ONENAND_IO_SIZE - 1; if (platform_device_register(&gpmc_onenand_device) < 0) { - pr_err("%s: Unable to register OneNAND device\n", __func__); + dev_err(dev, "Unable to register OneNAND device\n"); gpmc_cs_free(gpmc_onenand_data->cs); return; } diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 11d0b75..61a0635 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -49,6 +49,10 @@ static struct platform_device gpmc_smc91x_device = { .resource = gpmc_smc91x_resources, }; +static struct gpmc_settings smc91x_settings = { + .device_width = GPMC_DEVWIDTH_16BIT, +}; + /* * Set the gpmc timings for smc91c96. The timings are taken * from the data sheet available at: @@ -67,18 +71,6 @@ static int smc91c96_gpmc_retime(void) const int t7 = 5; /* Figure 12.4 write */ const int t8 = 5; /* Figure 12.4 write */ const int t20 = 185; /* Figure 12.2 read and 12.4 write */ - u32 l; - - l = GPMC_CONFIG1_DEVICESIZE_16; - if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) - l |= GPMC_CONFIG1_MUXADDDATA; - if (gpmc_cfg->flags & GPMC_READ_MON) - l |= GPMC_CONFIG1_WAIT_READ_MON; - if (gpmc_cfg->flags & GPMC_WRITE_MON) - l |= GPMC_CONFIG1_WAIT_WRITE_MON; - if (gpmc_cfg->wait_pin) - l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin); - gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l); /* * FIXME: Calculate the address and data bus muxed timings. @@ -104,7 +96,7 @@ static int smc91c96_gpmc_retime(void) dev_t.t_cez_w = t4_w * 1000; dev_t.t_wr_cycle = (t20 - t3) * 1000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &smc91x_settings, &dev_t); return gpmc_cs_set_timings(gpmc_cfg->cs, &t); } @@ -133,6 +125,18 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f; gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK); + if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA) + smc91x_settings.mux_add_data = GPMC_MUX_AD; + if (gpmc_cfg->flags & GPMC_READ_MON) + smc91x_settings.wait_on_read = true; + if (gpmc_cfg->flags & GPMC_WRITE_MON) + smc91x_settings.wait_on_write = true; + if (gpmc_cfg->wait_pin) + smc91x_settings.wait_pin = gpmc_cfg->wait_pin; + ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings); + if (ret < 0) + goto free1; + if (gpmc_cfg->retime) { ret = gpmc_cfg->retime(); if (ret != 0) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 6de3173..ed946df 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -26,6 +26,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/of_mtd.h> #include <linux/of_device.h> #include <linux/mtd/nand.h> @@ -91,9 +92,7 @@ #define GPMC_CS_SIZE 0x30 #define GPMC_BCH_SIZE 0x10 -#define GPMC_MEM_START 0x00000000 #define GPMC_MEM_END 0x3FFFFFFF -#define BOOT_ROM_SPACE 0x100000 /* 1MB */ #define GPMC_CHUNK_SHIFT 24 /* 16 MB */ #define GPMC_SECTION_SHIFT 28 /* 128 MB */ @@ -107,6 +106,9 @@ #define GPMC_HAS_WR_ACCESS 0x1 #define GPMC_HAS_WR_DATA_MUX_BUS 0x2 +#define GPMC_HAS_MUX_AAD 0x4 + +#define GPMC_NR_WAITPINS 4 /* XXX: Only NAND irq has been considered,currently these are the only ones used */ @@ -153,6 +155,7 @@ static struct resource gpmc_cs_mem[GPMC_CS_NUM]; static DEFINE_SPINLOCK(gpmc_mem_lock); /* Define chip-selects as reserved by default until probe completes */ static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1); +static unsigned int gpmc_nr_waitpins; static struct device *gpmc_dev; static int gpmc_irq; static resource_size_t phys_base, mem_size; @@ -181,7 +184,7 @@ void gpmc_cs_write_reg(int cs, int idx, u32 val) __raw_writel(val, reg_addr); } -u32 gpmc_cs_read_reg(int cs, int idx) +static u32 gpmc_cs_read_reg(int cs, int idx) { void __iomem *reg_addr; @@ -190,7 +193,7 @@ u32 gpmc_cs_read_reg(int cs, int idx) } /* TODO: Add support for gpmc_fck to clock framework and use it */ -unsigned long gpmc_get_fclk_period(void) +static unsigned long gpmc_get_fclk_period(void) { unsigned long rate = clk_get_rate(gpmc_l3_clk); @@ -205,7 +208,7 @@ unsigned long gpmc_get_fclk_period(void) return rate; } -unsigned int gpmc_ns_to_ticks(unsigned int time_ns) +static unsigned int gpmc_ns_to_ticks(unsigned int time_ns) { unsigned long tick_ps; @@ -215,7 +218,7 @@ unsigned int gpmc_ns_to_ticks(unsigned int time_ns) return (time_ns * 1000 + tick_ps - 1) / tick_ps; } -unsigned int gpmc_ps_to_ticks(unsigned int time_ps) +static unsigned int gpmc_ps_to_ticks(unsigned int time_ps) { unsigned long tick_ps; @@ -230,13 +233,6 @@ unsigned int gpmc_ticks_to_ns(unsigned int ticks) return ticks * gpmc_get_fclk_period() / 1000; } -unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns) -{ - unsigned long ticks = gpmc_ns_to_ticks(time_ns); - - return ticks * gpmc_get_fclk_period() / 1000; -} - static unsigned int gpmc_ticks_to_ps(unsigned int ticks) { return ticks * gpmc_get_fclk_period(); @@ -405,11 +401,18 @@ int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t) return 0; } -static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) +static int gpmc_cs_enable_mem(int cs, u32 base, u32 size) { u32 l; u32 mask; + /* + * Ensure that base address is aligned on a + * boundary equal to or greater than size. + */ + if (base & (size - 1)) + return -EINVAL; + mask = (1 << GPMC_SECTION_SHIFT) - size; l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); l &= ~0x3f; @@ -418,6 +421,8 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size) l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8; l |= GPMC_CONFIG7_CSVALID; gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l); + + return 0; } static void gpmc_cs_disable_mem(int cs) @@ -448,22 +453,14 @@ static int gpmc_cs_mem_enabled(int cs) return l & GPMC_CONFIG7_CSVALID; } -int gpmc_cs_set_reserved(int cs, int reserved) +static void gpmc_cs_set_reserved(int cs, int reserved) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - gpmc_cs_map &= ~(1 << cs); gpmc_cs_map |= (reserved ? 1 : 0) << cs; - - return 0; } -int gpmc_cs_reserved(int cs) +static bool gpmc_cs_reserved(int cs) { - if (cs > GPMC_CS_NUM) - return -ENODEV; - return gpmc_cs_map & (1 << cs); } @@ -510,6 +507,39 @@ static int gpmc_cs_delete_mem(int cs) return r; } +/** + * gpmc_cs_remap - remaps a chip-select physical base address + * @cs: chip-select to remap + * @base: physical base address to re-map chip-select to + * + * Re-maps a chip-select to a new physical base address specified by + * "base". Returns 0 on success and appropriate negative error code + * on failure. + */ +static int gpmc_cs_remap(int cs, u32 base) +{ + int ret; + u32 old_base, size; + + if (cs > GPMC_CS_NUM) + return -ENODEV; + gpmc_cs_get_memconf(cs, &old_base, &size); + if (base == old_base) + return 0; + gpmc_cs_disable_mem(cs); + ret = gpmc_cs_delete_mem(cs); + if (ret < 0) + return ret; + ret = gpmc_cs_insert_mem(cs, base, size); + if (ret < 0) + return ret; + ret = gpmc_cs_enable_mem(cs, base, size); + if (ret < 0) + return ret; + + return 0; +} + int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) { struct resource *res = &gpmc_cs_mem[cs]; @@ -535,7 +565,12 @@ int gpmc_cs_request(int cs, unsigned long size, unsigned long *base) if (r < 0) goto out; - gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + r = gpmc_cs_enable_mem(cs, res->start, resource_size(res)); + if (r < 0) { + release_resource(res); + goto out; + } + *base = res->start; gpmc_cs_set_reserved(cs, 1); out: @@ -561,16 +596,14 @@ void gpmc_cs_free(int cs) EXPORT_SYMBOL(gpmc_cs_free); /** - * gpmc_cs_configure - write request to configure gpmc - * @cs: chip select number + * gpmc_configure - write request to configure gpmc * @cmd: command type * @wval: value to write * @return status of the operation */ -int gpmc_cs_configure(int cs, int cmd, int wval) +int gpmc_configure(int cmd, int wval) { - int err = 0; - u32 regval = 0; + u32 regval; switch (cmd) { case GPMC_ENABLE_IRQ: @@ -590,43 +623,14 @@ int gpmc_cs_configure(int cs, int cmd, int wval) gpmc_write_reg(GPMC_CONFIG, regval); break; - case GPMC_CONFIG_RDY_BSY: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - if (wval) - regval |= WR_RD_PIN_MONITORING; - else - regval &= ~WR_RD_PIN_MONITORING; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_SIZE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* clear 2 target bits */ - regval &= ~GPMC_CONFIG1_DEVICESIZE(3); - - /* set the proper value */ - regval |= GPMC_CONFIG1_DEVICESIZE(wval); - - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - - case GPMC_CONFIG_DEV_TYPE: - regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - regval |= GPMC_CONFIG1_DEVICETYPE(wval); - if (wval == GPMC_DEVICETYPE_NOR) - regval |= GPMC_CONFIG1_MUXADDDATA; - gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); - break; - default: - printk(KERN_ERR "gpmc_configure_cs: Not supported\n"); - err = -EINVAL; + pr_err("%s: command not supported\n", __func__); + return -EINVAL; } - return err; + return 0; } -EXPORT_SYMBOL(gpmc_cs_configure); +EXPORT_SYMBOL(gpmc_configure); void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs) { @@ -781,16 +785,16 @@ static void gpmc_mem_exit(void) } -static int gpmc_mem_init(void) +static void gpmc_mem_init(void) { - int cs, rc; - unsigned long boot_rom_space = 0; + int cs; - /* never allocate the first page, to facilitate bug detection; - * even if we didn't boot from ROM. + /* + * The first 1MB of GPMC address space is typically mapped to + * the internal ROM. Never allocate the first page, to + * facilitate bug detection; even if we didn't boot from ROM. */ - boot_rom_space = BOOT_ROM_SPACE; - gpmc_mem_root.start = GPMC_MEM_START + boot_rom_space; + gpmc_mem_root.start = SZ_1M; gpmc_mem_root.end = GPMC_MEM_END; /* Reserve all regions that has been set up by bootloader */ @@ -800,16 +804,12 @@ static int gpmc_mem_init(void) if (!gpmc_cs_mem_enabled(cs)) continue; gpmc_cs_get_memconf(cs, &base, &size); - rc = gpmc_cs_insert_mem(cs, base, size); - if (rc < 0) { - while (--cs >= 0) - if (gpmc_cs_mem_enabled(cs)) - gpmc_cs_delete_mem(cs); - return rc; + if (gpmc_cs_insert_mem(cs, base, size)) { + pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n", + __func__, cs, base, base + size); + gpmc_cs_disable_mem(cs); } } - - return 0; } static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) @@ -825,9 +825,9 @@ static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk) /* XXX: can the cycles be avoided ? */ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -880,9 +880,9 @@ static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -942,9 +942,9 @@ static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_rd_off */ @@ -982,9 +982,9 @@ static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool mux) { - bool mux = dev_t->mux; u32 temp; /* adv_wr_off */ @@ -1054,7 +1054,8 @@ static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t, } static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_device_timings *dev_t, + bool sync) { u32 temp; @@ -1068,7 +1069,7 @@ static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t, gpmc_t->cs_on + dev_t->t_ce_avd); gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp); - if (dev_t->sync_write || dev_t->sync_read) + if (sync) gpmc_calc_sync_common_timings(gpmc_t, dev_t); return 0; @@ -1103,21 +1104,29 @@ static void gpmc_convert_ps_to_ns(struct gpmc_timings *t) } int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t) + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t) { + bool mux = false, sync = false; + + if (gpmc_s) { + mux = gpmc_s->mux_add_data ? true : false; + sync = (gpmc_s->sync_read || gpmc_s->sync_write); + } + memset(gpmc_t, 0, sizeof(*gpmc_t)); - gpmc_calc_common_timings(gpmc_t, dev_t); + gpmc_calc_common_timings(gpmc_t, dev_t, sync); - if (dev_t->sync_read) - gpmc_calc_sync_read_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_read) + gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_read_timings(gpmc_t, dev_t); + gpmc_calc_async_read_timings(gpmc_t, dev_t, mux); - if (dev_t->sync_write) - gpmc_calc_sync_write_timings(gpmc_t, dev_t); + if (gpmc_s && gpmc_s->sync_write) + gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux); else - gpmc_calc_async_write_timings(gpmc_t, dev_t); + gpmc_calc_async_write_timings(gpmc_t, dev_t, mux); /* TODO: remove, see function definition */ gpmc_convert_ps_to_ns(gpmc_t); @@ -1125,6 +1134,90 @@ int gpmc_calc_timings(struct gpmc_timings *gpmc_t, return 0; } +/** + * gpmc_cs_program_settings - programs non-timing related settings + * @cs: GPMC chip-select to program + * @p: pointer to GPMC settings structure + * + * Programs non-timing related settings for a GPMC chip-select, such as + * bus-width, burst configuration, etc. Function should be called once + * for each chip-select that is being used and must be called before + * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1 + * register will be initialised to zero by this function. Returns 0 on + * success and appropriate negative error code on failure. + */ +int gpmc_cs_program_settings(int cs, struct gpmc_settings *p) +{ + u32 config1; + + if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) { + pr_err("%s: invalid width %d!", __func__, p->device_width); + return -EINVAL; + } + + /* Address-data multiplexing not supported for NAND devices */ + if (p->device_nand && p->mux_add_data) { + pr_err("%s: invalid configuration!\n", __func__); + return -EINVAL; + } + + if ((p->mux_add_data > GPMC_MUX_AD) || + ((p->mux_add_data == GPMC_MUX_AAD) && + !(gpmc_capability & GPMC_HAS_MUX_AAD))) { + pr_err("%s: invalid multiplex configuration!\n", __func__); + return -EINVAL; + } + + /* Page/burst mode supports lengths of 4, 8 and 16 bytes */ + if (p->burst_read || p->burst_write) { + switch (p->burst_len) { + case GPMC_BURST_4: + case GPMC_BURST_8: + case GPMC_BURST_16: + break; + default: + pr_err("%s: invalid page/burst-length (%d)\n", + __func__, p->burst_len); + return -EINVAL; + } + } + + if ((p->wait_on_read || p->wait_on_write) && + (p->wait_pin > gpmc_nr_waitpins)) { + pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin); + return -EINVAL; + } + + config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1)); + + if (p->sync_read) + config1 |= GPMC_CONFIG1_READTYPE_SYNC; + if (p->sync_write) + config1 |= GPMC_CONFIG1_WRITETYPE_SYNC; + if (p->wait_on_read) + config1 |= GPMC_CONFIG1_WAIT_READ_MON; + if (p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_WRITE_MON; + if (p->wait_on_read || p->wait_on_write) + config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin); + if (p->device_nand) + config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND); + if (p->mux_add_data) + config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data); + if (p->burst_read) + config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP; + if (p->burst_write) + config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP; + if (p->burst_read || p->burst_write) { + config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3); + config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0; + } + + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1); + + return 0; +} + #ifdef CONFIG_OF static struct of_device_id gpmc_dt_ids[] = { { .compatible = "ti,omap2420-gpmc" }, @@ -1136,70 +1229,110 @@ static struct of_device_id gpmc_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, gpmc_dt_ids); +/** + * gpmc_read_settings_dt - read gpmc settings from device-tree + * @np: pointer to device-tree node for a gpmc child device + * @p: pointer to gpmc settings structure + * + * Reads the GPMC settings for a GPMC child device from device-tree and + * stores them in the GPMC settings structure passed. The GPMC settings + * structure is initialised to zero by this function and so any + * previously stored settings will be cleared. + */ +void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p) +{ + memset(p, 0, sizeof(struct gpmc_settings)); + + p->sync_read = of_property_read_bool(np, "gpmc,sync-read"); + p->sync_write = of_property_read_bool(np, "gpmc,sync-write"); + p->device_nand = of_property_read_bool(np, "gpmc,device-nand"); + of_property_read_u32(np, "gpmc,device-width", &p->device_width); + of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data); + + if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) { + p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap"); + p->burst_read = of_property_read_bool(np, "gpmc,burst-read"); + p->burst_write = of_property_read_bool(np, "gpmc,burst-write"); + if (!p->burst_read && !p->burst_write) + pr_warn("%s: page/burst-length set but not used!\n", + __func__); + } + + if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) { + p->wait_on_read = of_property_read_bool(np, + "gpmc,wait-on-read"); + p->wait_on_write = of_property_read_bool(np, + "gpmc,wait-on-write"); + if (!p->wait_on_read && !p->wait_on_write) + pr_warn("%s: read/write wait monitoring not enabled!\n", + __func__); + } +} + static void __maybe_unused gpmc_read_timings_dt(struct device_node *np, struct gpmc_timings *gpmc_t) { - u32 val; + struct gpmc_bool_timings *p; + + if (!np || !gpmc_t) + return; memset(gpmc_t, 0, sizeof(*gpmc_t)); /* minimum clock period for syncronous mode */ - if (!of_property_read_u32(np, "gpmc,sync-clk", &val)) - gpmc_t->sync_clk = val; + of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk); /* chip select timtings */ - if (!of_property_read_u32(np, "gpmc,cs-on", &val)) - gpmc_t->cs_on = val; - - if (!of_property_read_u32(np, "gpmc,cs-rd-off", &val)) - gpmc_t->cs_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,cs-wr-off", &val)) - gpmc_t->cs_wr_off = val; + of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on); + of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off); + of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off); /* ADV signal timings */ - if (!of_property_read_u32(np, "gpmc,adv-on", &val)) - gpmc_t->adv_on = val; - - if (!of_property_read_u32(np, "gpmc,adv-rd-off", &val)) - gpmc_t->adv_rd_off = val; - - if (!of_property_read_u32(np, "gpmc,adv-wr-off", &val)) - gpmc_t->adv_wr_off = val; + of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on); + of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off); + of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off); /* WE signal timings */ - if (!of_property_read_u32(np, "gpmc,we-on", &val)) - gpmc_t->we_on = val; - - if (!of_property_read_u32(np, "gpmc,we-off", &val)) - gpmc_t->we_off = val; + of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on); + of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off); /* OE signal timings */ - if (!of_property_read_u32(np, "gpmc,oe-on", &val)) - gpmc_t->oe_on = val; - - if (!of_property_read_u32(np, "gpmc,oe-off", &val)) - gpmc_t->oe_off = val; + of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on); + of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off); /* access and cycle timings */ - if (!of_property_read_u32(np, "gpmc,page-burst-access", &val)) - gpmc_t->page_burst_access = val; - - if (!of_property_read_u32(np, "gpmc,access", &val)) - gpmc_t->access = val; - - if (!of_property_read_u32(np, "gpmc,rd-cycle", &val)) - gpmc_t->rd_cycle = val; - - if (!of_property_read_u32(np, "gpmc,wr-cycle", &val)) - gpmc_t->wr_cycle = val; - - /* only for OMAP3430 */ - if (!of_property_read_u32(np, "gpmc,wr-access", &val)) - gpmc_t->wr_access = val; - - if (!of_property_read_u32(np, "gpmc,wr-data-mux-bus", &val)) - gpmc_t->wr_data_mux_bus = val; + of_property_read_u32(np, "gpmc,page-burst-access-ns", + &gpmc_t->page_burst_access); + of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access); + of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle); + of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle); + of_property_read_u32(np, "gpmc,bus-turnaround-ns", + &gpmc_t->bus_turnaround); + of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns", + &gpmc_t->cycle2cycle_delay); + of_property_read_u32(np, "gpmc,wait-monitoring-ns", + &gpmc_t->wait_monitoring); + of_property_read_u32(np, "gpmc,clk-activation-ns", + &gpmc_t->clk_activation); + + /* only applicable to OMAP3+ */ + of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access); + of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns", + &gpmc_t->wr_data_mux_bus); + + /* bool timing parameters */ + p = &gpmc_t->bool_timings; + + p->cycle2cyclediffcsen = + of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen"); + p->cycle2cyclesamecsen = + of_property_read_bool(np, "gpmc,cycle2cycle-samecsen"); + p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay"); + p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay"); + p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay"); + p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay"); + p->time_para_granularity = + of_property_read_bool(np, "gpmc,time-para-granularity"); } #ifdef CONFIG_MTD_NAND @@ -1295,6 +1428,81 @@ static int gpmc_probe_onenand_child(struct platform_device *pdev, } #endif +/** + * gpmc_probe_generic_child - configures the gpmc for a child device + * @pdev: pointer to gpmc platform device + * @child: pointer to device-tree node for child device + * + * Allocates and configures a GPMC chip-select for a child device. + * Returns 0 on success and appropriate negative error code on failure. + */ +static int gpmc_probe_generic_child(struct platform_device *pdev, + struct device_node *child) +{ + struct gpmc_settings gpmc_s; + struct gpmc_timings gpmc_t; + struct resource res; + unsigned long base; + int ret, cs; + + if (of_property_read_u32(child, "reg", &cs) < 0) { + dev_err(&pdev->dev, "%s has no 'reg' property\n", + child->full_name); + return -ENODEV; + } + + if (of_address_to_resource(child, 0, &res) < 0) { + dev_err(&pdev->dev, "%s has malformed 'reg' property\n", + child->full_name); + return -ENODEV; + } + + ret = gpmc_cs_request(cs, resource_size(&res), &base); + if (ret < 0) { + dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs); + return ret; + } + + /* + * FIXME: gpmc_cs_request() will map the CS to an arbitary + * location in the gpmc address space. When booting with + * device-tree we want the NOR flash to be mapped to the + * location specified in the device-tree blob. So remap the + * CS to this location. Once DT migration is complete should + * just make gpmc_cs_request() map a specific address. + */ + ret = gpmc_cs_remap(cs, res.start); + if (ret < 0) { + dev_err(&pdev->dev, "cannot remap GPMC CS %d to 0x%x\n", + cs, res.start); + goto err; + } + + gpmc_read_settings_dt(child, &gpmc_s); + + ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width); + if (ret < 0) + goto err; + + ret = gpmc_cs_program_settings(cs, &gpmc_s); + if (ret < 0) + goto err; + + gpmc_read_timings_dt(child, &gpmc_t); + gpmc_cs_set_timings(cs, &gpmc_t); + + if (of_platform_device_create(child, NULL, &pdev->dev)) + return 0; + + dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name); + ret = -ENODEV; + +err: + gpmc_cs_free(cs); + + return ret; +} + static int gpmc_probe_dt(struct platform_device *pdev) { int ret; @@ -1305,6 +1513,13 @@ static int gpmc_probe_dt(struct platform_device *pdev) if (!of_id) return 0; + ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins", + &gpmc_nr_waitpins); + if (ret < 0) { + pr_err("%s: number of wait pins not found!\n", __func__); + return ret; + } + for_each_node_by_name(child, "nand") { ret = gpmc_probe_nand_child(pdev, child); if (ret < 0) { @@ -1320,6 +1535,23 @@ static int gpmc_probe_dt(struct platform_device *pdev) return ret; } } + + for_each_node_by_name(child, "nor") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + + for_each_node_by_name(child, "ethernet") { + ret = gpmc_probe_generic_child(pdev, child); + if (ret < 0) { + of_node_put(child); + return ret; + } + } + return 0; } #else @@ -1364,18 +1596,27 @@ static int gpmc_probe(struct platform_device *pdev) gpmc_dev = &pdev->dev; l = gpmc_read_reg(GPMC_REVISION); + + /* + * FIXME: Once device-tree migration is complete the below flags + * should be populated based upon the device-tree compatible + * string. For now just use the IP revision. OMAP3+ devices have + * the wr_access and wr_data_mux_bus register fields. OMAP4+ + * devices support the addr-addr-data multiplex protocol. + * + * GPMC IP revisions: + * - OMAP24xx = 2.0 + * - OMAP3xxx = 5.0 + * - OMAP44xx/54xx/AM335x = 6.0 + */ if (GPMC_REVISION_MAJOR(l) > 0x4) gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS; + if (GPMC_REVISION_MAJOR(l) > 0x5) + gpmc_capability |= GPMC_HAS_MUX_AAD; dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l), GPMC_REVISION_MINOR(l)); - rc = gpmc_mem_init(); - if (rc < 0) { - clk_disable_unprepare(gpmc_l3_clk); - clk_put(gpmc_l3_clk); - dev_err(gpmc_dev, "failed to reserve memory\n"); - return rc; - } + gpmc_mem_init(); if (gpmc_setup_irq() < 0) dev_warn(gpmc_dev, "gpmc_setup_irq failed\n"); @@ -1383,6 +1624,9 @@ static int gpmc_probe(struct platform_device *pdev) /* Now the GPMC is initialised, unreserve the chip-selects */ gpmc_cs_map = 0; + if (!pdev->dev.of_node) + gpmc_nr_waitpins = GPMC_NR_WAITPINS; + rc = gpmc_probe_dt(pdev); if (rc < 0) { clk_disable_unprepare(gpmc_l3_clk); diff --git a/arch/arm/mach-omap2/gpmc.h b/arch/arm/mach-omap2/gpmc.h index fe0a844..707f6d5 100644 --- a/arch/arm/mach-omap2/gpmc.h +++ b/arch/arm/mach-omap2/gpmc.h @@ -58,7 +58,7 @@ #define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1) #define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10) #define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0) -#define GPMC_CONFIG1_MUXADDDATA (1 << 9) +#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8) #define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4) #define GPMC_CONFIG1_FCLK_DIV(val) (val & 3) #define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1)) @@ -73,6 +73,13 @@ #define GPMC_IRQ_FIFOEVENTENABLE 0x01 #define GPMC_IRQ_COUNT_EVENT 0x02 +#define GPMC_BURST_4 4 /* 4 word burst */ +#define GPMC_BURST_8 8 /* 8 word burst */ +#define GPMC_BURST_16 16 /* 16 word burst */ +#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */ +#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */ +#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */ +#define GPMC_MUX_AD 2 /* Addr-Data multiplex */ /* bool type time settings */ struct gpmc_bool_timings { @@ -178,10 +185,6 @@ struct gpmc_device_timings { u8 cyc_wpl; /* write deassertion time in cycles */ u32 cyc_iaa; /* initial access time in cycles */ - bool mux; /* address & data muxed */ - bool sync_write;/* synchronous write */ - bool sync_read; /* synchronous read */ - /* extra delays */ bool ce_xdelay; bool avd_xdelay; @@ -189,28 +192,40 @@ struct gpmc_device_timings { bool we_xdelay; }; +struct gpmc_settings { + bool burst_wrap; /* enables wrap bursting */ + bool burst_read; /* enables read page/burst mode */ + bool burst_write; /* enables write page/burst mode */ + bool device_nand; /* device is NAND */ + bool sync_read; /* enables synchronous reads */ + bool sync_write; /* enables synchronous writes */ + bool wait_on_read; /* monitor wait on reads */ + bool wait_on_write; /* monitor wait on writes */ + u32 burst_len; /* page/burst length */ + u32 device_width; /* device bus width (8 or 16 bit) */ + u32 mux_add_data; /* multiplex address & data */ + u32 wait_pin; /* wait-pin to be used */ +}; + extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t, - struct gpmc_device_timings *dev_t); + struct gpmc_settings *gpmc_s, + struct gpmc_device_timings *dev_t); extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs); extern int gpmc_get_client_irq(unsigned irq_config); -extern unsigned int gpmc_ns_to_ticks(unsigned int time_ns); -extern unsigned int gpmc_ps_to_ticks(unsigned int time_ps); extern unsigned int gpmc_ticks_to_ns(unsigned int ticks); -extern unsigned int gpmc_round_ns_to_ticks(unsigned int time_ns); -extern unsigned long gpmc_get_fclk_period(void); extern void gpmc_cs_write_reg(int cs, int idx, u32 val); -extern u32 gpmc_cs_read_reg(int cs, int idx); extern int gpmc_calc_divider(unsigned int sync_clk); extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t); +extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p); extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base); extern void gpmc_cs_free(int cs); -extern int gpmc_cs_set_reserved(int cs, int reserved); -extern int gpmc_cs_reserved(int cs); extern void omap3_gpmc_save_context(void); extern void omap3_gpmc_restore_context(void); -extern int gpmc_cs_configure(int cs, int cmd, int wval); +extern int gpmc_configure(int cmd, int wval); +extern void gpmc_read_settings_dt(struct device_node *np, + struct gpmc_settings *p); #endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 63e6384..f12aa6c 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -57,16 +57,6 @@ #include "common.h" #include "powerdomain.h" -/* Parent clocks, eventually these will come from the clock framework */ - -#define OMAP2_MPU_SOURCE "sys_ck" -#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE -#define OMAP4_MPU_SOURCE "sys_clkin_ck" -#define OMAP5_MPU_SOURCE "sys_clkin" -#define OMAP2_32K_SOURCE "func_32k_ck" -#define OMAP3_32K_SOURCE "omap_32k_fck" -#define OMAP4_32K_SOURCE "sys_32k_ck" - #define REALTIME_COUNTER_BASE 0x48243200 #define INCREMENTER_NUMERATOR_OFFSET 0x10 #define INCREMENTER_DENUMERATOR_RELOAD_OFFSET 0x14 @@ -130,7 +120,6 @@ static void omap2_gp_timer_set_mode(enum clock_event_mode mode, } static struct clock_event_device clockevent_gpt = { - .name = "gp_timer", .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, .rating = 300, .set_next_event = omap2_gp_timer_set_next_event, @@ -171,6 +160,12 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, if (property && !of_get_property(np, property, NULL)) continue; + if (!property && (of_get_property(np, "ti,timer-alwon", NULL) || + of_get_property(np, "ti,timer-dsp", NULL) || + of_get_property(np, "ti,timer-pwm", NULL) || + of_get_property(np, "ti,timer-secure", NULL))) + continue; + of_add_property(np, &device_disabled); return np; } @@ -215,16 +210,17 @@ static u32 __init omap_dm_timer_get_errata(void) } static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, - int gptimer_id, - const char *fck_source, - const char *property, - int posted) + const char *fck_source, + const char *property, + const char **timer_name, + int posted) { char name[10]; /* 10 = sizeof("gptXX_Xck0") */ const char *oh_name; struct device_node *np; struct omap_hwmod *oh; struct resource irq, mem; + struct clk *src; int r = 0; if (of_have_populated_dt()) { @@ -244,10 +240,10 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, of_node_put(np); } else { - if (omap_dm_timer_reserve_systimer(gptimer_id)) + if (omap_dm_timer_reserve_systimer(timer->id)) return -ENODEV; - sprintf(name, "timer%d", gptimer_id); + sprintf(name, "timer%d", timer->id); oh_name = name; } @@ -255,6 +251,8 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, if (!oh) return -ENODEV; + *timer_name = oh->name; + if (!of_have_populated_dt()) { r = omap_hwmod_get_resource_byname(oh, IORESOURCE_IRQ, NULL, &irq); @@ -277,24 +275,24 @@ static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, /* After the dmtimer is using hwmod these clocks won't be needed */ timer->fclk = clk_get(NULL, omap_hwmod_get_main_clk(oh)); if (IS_ERR(timer->fclk)) - return -ENODEV; + return PTR_ERR(timer->fclk); - /* FIXME: Need to remove hard-coded test on timer ID */ - if (gptimer_id != 12) { - struct clk *src; - - src = clk_get(NULL, fck_source); - if (IS_ERR(src)) { - r = -EINVAL; - } else { - r = clk_set_parent(timer->fclk, src); - if (r < 0) - pr_warn("%s: %s cannot set source\n", - __func__, oh->name); + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) + return PTR_ERR(src); + + if (clk_get_parent(timer->fclk) != src) { + r = clk_set_parent(timer->fclk, src); + if (r < 0) { + pr_warn("%s: %s cannot set source\n", __func__, + oh->name); clk_put(src); + return r; } } + clk_put(src); + omap_hwmod_setup_one(oh_name); omap_hwmod_enable(oh); __omap_dm_timer_init_regs(timer); @@ -318,6 +316,7 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, { int res; + clkev.id = gptimer_id; clkev.errata = omap_dm_timer_get_errata(); /* @@ -327,8 +326,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, */ __omap_dm_timer_override_errata(&clkev, OMAP_TIMER_ERRATA_I103_I767); - res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source, property, - OMAP_TIMER_POSTED); + res = omap_dm_timer_init_one(&clkev, fck_source, property, + &clockevent_gpt.name, OMAP_TIMER_POSTED); BUG_ON(res); omap2_gp_timer_irq.dev_id = &clkev; @@ -342,8 +341,8 @@ static void __init omap2_gp_clockevent_init(int gptimer_id, 3, /* Timer internal resynch latency */ 0xffffffff); - pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", - gptimer_id, clkev.rate); + pr_info("OMAP clockevent source: %s at %lu Hz\n", clockevent_gpt.name, + clkev.rate); } /* Clocksource code */ @@ -360,7 +359,6 @@ static cycle_t clocksource_read_cycles(struct clocksource *cs) } static struct clocksource clocksource_gpt = { - .name = "gp_timer", .rating = 300, .read = clocksource_read_cycles, .mask = CLOCKSOURCE_MASK(32), @@ -443,13 +441,16 @@ static int __init __maybe_unused omap2_sync32k_clocksource_init(void) } static void __init omap2_gptimer_clocksource_init(int gptimer_id, - const char *fck_source) + const char *fck_source, + const char *property) { int res; + clksrc.id = gptimer_id; clksrc.errata = omap_dm_timer_get_errata(); - res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source, NULL, + res = omap_dm_timer_init_one(&clksrc, fck_source, property, + &clocksource_gpt.name, OMAP_TIMER_NONPOSTED); BUG_ON(res); @@ -462,8 +463,8 @@ static void __init omap2_gptimer_clocksource_init(int gptimer_id, pr_err("Could not register clocksource %s\n", clocksource_gpt.name); else - pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", - gptimer_id, clksrc.rate); + pr_info("OMAP clocksource: %s at %lu Hz\n", + clocksource_gpt.name, clksrc.rate); } #ifdef CONFIG_SOC_HAS_REALTIME_COUNTER @@ -488,7 +489,7 @@ static void __init realtime_counter_init(void) pr_err("%s: ioremap failed\n", __func__); return; } - sys_clk = clk_get(NULL, OMAP5_MPU_SOURCE); + sys_clk = clk_get(NULL, "sys_clkin"); if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); @@ -545,53 +546,52 @@ static inline void __init realtime_counter_init(void) #endif #define OMAP_SYS_GP_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_gptimer_timer_init(void) \ { \ - if (omap_clk_init) \ - omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src); \ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ } #define OMAP_SYS_32K_TIMER_INIT(name, clkev_nr, clkev_src, clkev_prop, \ - clksrc_nr, clksrc_src) \ + clksrc_nr, clksrc_src, clksrc_prop) \ void __init omap##name##_sync32k_timer_init(void) \ { \ - if (omap_clk_init) \ - omap_clk_init(); \ omap_dmtimer_init(); \ omap2_gp_clockevent_init((clkev_nr), clkev_src, clkev_prop); \ /* Enable the use of clocksource="gp_timer" kernel parameter */ \ if (use_gptimer_clksrc) \ - omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src);\ + omap2_gptimer_clocksource_init((clksrc_nr), clksrc_src, \ + clksrc_prop); \ else \ omap2_sync32k_clocksource_init(); \ } #ifdef CONFIG_ARCH_OMAP2 -OMAP_SYS_32K_TIMER_INIT(2, 1, OMAP2_32K_SOURCE, "ti,timer-alwon", - 2, OMAP2_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(2, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP2 */ #ifdef CONFIG_ARCH_OMAP3 -OMAP_SYS_32K_TIMER_INIT(3, 1, OMAP3_32K_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_32K_TIMER_INIT(3_secure, 12, OMAP3_32K_SOURCE, "ti,timer-secure", - 2, OMAP3_MPU_SOURCE); -OMAP_SYS_GP_TIMER_INIT(3_gp, 1, OMAP3_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP3_MPU_SOURCE); +OMAP_SYS_32K_TIMER_INIT(3, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "timer_sys_ck", NULL); +OMAP_SYS_32K_TIMER_INIT(3_secure, 12, "secure_32k_fck", "ti,timer-secure", + 2, "timer_sys_ck", NULL); #endif /* CONFIG_ARCH_OMAP3 */ -#ifdef CONFIG_SOC_AM33XX -OMAP_SYS_GP_TIMER_INIT(3_am33xx, 1, OMAP4_MPU_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); -#endif /* CONFIG_SOC_AM33XX */ +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_SOC_AM33XX) +OMAP_SYS_GP_TIMER_INIT(3, 2, "timer_sys_ck", NULL, + 1, "timer_sys_ck", "ti,timer-alwon"); +#endif + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) +static OMAP_SYS_32K_TIMER_INIT(4, 1, "timer_32k_ck", "ti,timer-alwon", + 2, "sys_clkin_ck", NULL); +#endif #ifdef CONFIG_ARCH_OMAP4 -OMAP_SYS_32K_TIMER_INIT(4, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP4_MPU_SOURCE); #ifdef CONFIG_LOCAL_TIMERS static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, OMAP44XX_LOCAL_TWD_BASE, 29); void __init omap4_local_timer_init(void) @@ -620,13 +620,11 @@ void __init omap4_local_timer_init(void) #endif /* CONFIG_ARCH_OMAP4 */ #ifdef CONFIG_SOC_OMAP5 -OMAP_SYS_32K_TIMER_INIT(5, 1, OMAP4_32K_SOURCE, "ti,timer-alwon", - 2, OMAP5_MPU_SOURCE); void __init omap5_realtime_timer_init(void) { int err; - omap5_sync32k_timer_init(); + omap4_sync32k_timer_init(); realtime_counter_init(); err = arch_timer_of_register(); diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c index 5706bdc..aa27d7f 100644 --- a/arch/arm/mach-omap2/usb-host.c +++ b/arch/arm/mach-omap2/usb-host.c @@ -22,8 +22,12 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/dma-mapping.h> - -#include <asm/io.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/string.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/usb/phy.h> #include "soc.h" #include "omap_device.h" @@ -526,3 +530,155 @@ void __init usbhs_init(struct usbhs_omap_platform_data *pdata) } #endif + +/* Template for PHY regulators */ +static struct fixed_voltage_config hsusb_reg_config = { + /* .supply_name filled later */ + .microvolts = 3300000, + .gpio = -1, /* updated later */ + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, /* updated later */ + .enabled_at_boot = 0, /* keep in RESET */ + /* .init_data filled later */ +}; + +static const char *nop_name = "nop_usb_xceiv"; /* NOP PHY driver */ +static const char *reg_name = "reg-fixed-voltage"; /* Regulator driver */ + +/** + * usbhs_add_regulator - Add a gpio based fixed voltage regulator device + * @name: name for the regulator + * @dev_id: device id of the device this regulator supplies power to + * @dev_supply: supply name that the device expects + * @gpio: GPIO number + * @polarity: 1 - Active high, 0 - Active low + */ +static int usbhs_add_regulator(char *name, char *dev_id, char *dev_supply, + int gpio, int polarity) +{ + struct regulator_consumer_supply *supplies; + struct regulator_init_data *reg_data; + struct fixed_voltage_config *config; + struct platform_device *pdev; + int ret; + + supplies = kzalloc(sizeof(*supplies), GFP_KERNEL); + if (!supplies) + return -ENOMEM; + + supplies->supply = dev_supply; + supplies->dev_name = dev_id; + + reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL); + if (!reg_data) + return -ENOMEM; + + reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS; + reg_data->consumer_supplies = supplies; + reg_data->num_consumer_supplies = 1; + + config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config), + GFP_KERNEL); + if (!config) + return -ENOMEM; + + config->supply_name = name; + config->gpio = gpio; + config->enable_high = polarity; + config->init_data = reg_data; + + /* create a regulator device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = PLATFORM_DEVID_AUTO; + pdev->name = reg_name; + pdev->dev.platform_data = config; + + ret = platform_device_register(pdev); + if (ret) + pr_err("%s: Failed registering regulator %s for %s\n", + __func__, name, dev_id); + + return ret; +} + +int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys) +{ + char *rail_name; + int i, len; + struct platform_device *pdev; + char *phy_id; + + /* the phy_id will be something like "nop_usb_xceiv.1" */ + len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */ + + for (i = 0; i < num_phys; i++) { + + if (!phy->port) { + pr_err("%s: Invalid port 0. Must start from 1\n", + __func__); + continue; + } + + /* do we need a NOP PHY device ? */ + if (!gpio_is_valid(phy->reset_gpio) && + !gpio_is_valid(phy->vcc_gpio)) + continue; + + /* create a NOP PHY device */ + pdev = kzalloc(sizeof(*pdev), GFP_KERNEL); + if (!pdev) + return -ENOMEM; + + pdev->id = phy->port; + pdev->name = nop_name; + pdev->dev.platform_data = phy->platform_data; + + phy_id = kmalloc(len, GFP_KERNEL); + if (!phy_id) + return -ENOMEM; + + scnprintf(phy_id, len, "nop_usb_xceiv.%d\n", + pdev->id); + + if (platform_device_register(pdev)) { + pr_err("%s: Failed to register device %s\n", + __func__, phy_id); + continue; + } + + usb_bind_phy("ehci-omap.0", phy->port - 1, phy_id); + + /* Do we need RESET regulator ? */ + if (gpio_is_valid(phy->reset_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_reset", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "reset", + phy->reset_gpio, 1); + } + + /* Do we need VCC regulator ? */ + if (gpio_is_valid(phy->vcc_gpio)) { + + rail_name = kmalloc(13, GFP_KERNEL); + if (!rail_name) + return -ENOMEM; + + scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port); + + usbhs_add_regulator(rail_name, phy_id, "vcc", + phy->vcc_gpio, phy->vcc_polarity); + } + + phy++; + } + + return 0; +} diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index c5a3c6f..e832bc7 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include <linux/err.h> #include <linux/string.h> #include <linux/types.h> #include <linux/errno.h> @@ -26,6 +27,24 @@ static u8 async_cs, sync_cs; static unsigned refclk_psec; +static struct gpmc_settings tusb_async = { + .wait_on_read = true, + .wait_on_write = true, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; + +static struct gpmc_settings tusb_sync = { + .burst_read = true, + .burst_write = true, + .sync_read = true, + .sync_write = true, + .wait_on_read = true, + .wait_on_write = true, + .burst_len = GPMC_BURST_16, + .device_width = GPMC_DEVWIDTH_16BIT, + .mux_add_data = GPMC_MUX_AD, +}; /* NOTE: timings are from tusb 6010 datasheet Rev 1.8, 12-Sept 2006 */ @@ -37,8 +56,6 @@ static int tusb_set_async_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.t_ceasu = 8 * 1000; dev_t.t_avdasu = t_acsnh_advnh - 7000; dev_t.t_ce_avd = 1000; @@ -52,7 +69,7 @@ static int tusb_set_async_mode(unsigned sysclk_ps) dev_t.t_wpl = 300; dev_t.cyc_aavdh_we = 1; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_async, &dev_t); return gpmc_cs_set_timings(async_cs, &t); } @@ -65,10 +82,6 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) memset(&dev_t, 0, sizeof(dev_t)); - dev_t.mux = true; - dev_t.sync_read = true; - dev_t.sync_write = true; - dev_t.clk = 11100; dev_t.t_bacc = 1000; dev_t.t_ces = 1000; @@ -84,7 +97,7 @@ static int tusb_set_sync_mode(unsigned sysclk_ps) dev_t.cyc_wpl = 6; dev_t.t_ce_rdyz = 7000; - gpmc_calc_timings(&t, &dev_t); + gpmc_calc_timings(&t, &tusb_sync, &dev_t); return gpmc_cs_set_timings(sync_cs, &t); } @@ -165,18 +178,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[0].end = tusb_resources[0].start + 0x9ff; + tusb_async.wait_pin = waitpin; async_cs = async; - gpmc_cs_write_reg(async, GPMC_CS_CONFIG1, - GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_READTYPE_ASYNC - | GPMC_CONFIG1_WRITETYPE_ASYNC - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA); + status = gpmc_cs_program_settings(async_cs, &tusb_async); + if (status < 0) + return status; /* SYNC region, primarily for DMA */ status = gpmc_cs_request(sync, SZ_16M, (unsigned long *) @@ -186,21 +193,12 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, return status; } tusb_resources[1].end = tusb_resources[1].start + 0x9ff; + tusb_sync.wait_pin = waitpin; sync_cs = sync; - gpmc_cs_write_reg(sync, GPMC_CS_CONFIG1, - GPMC_CONFIG1_READMULTIPLE_SUPP - | GPMC_CONFIG1_READTYPE_SYNC - | GPMC_CONFIG1_WRITEMULTIPLE_SUPP - | GPMC_CONFIG1_WRITETYPE_SYNC - | GPMC_CONFIG1_PAGE_LEN(2) - | GPMC_CONFIG1_WAIT_READ_MON - | GPMC_CONFIG1_WAIT_WRITE_MON - | GPMC_CONFIG1_WAIT_PIN_SEL(waitpin) - | GPMC_CONFIG1_DEVICESIZE_16 - | GPMC_CONFIG1_DEVICETYPE_NOR - | GPMC_CONFIG1_MUXADDDATA - /* fclk divider gets set later */ - ); + + status = gpmc_cs_program_settings(sync_cs, &tusb_sync); + if (status < 0) + return status; /* IRQ */ status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); diff --git a/arch/arm/mach-omap2/usb.h b/arch/arm/mach-omap2/usb.h index 3319f5c..e7261eb 100644 --- a/arch/arm/mach-omap2/usb.h +++ b/arch/arm/mach-omap2/usb.h @@ -53,8 +53,17 @@ #define USBPHY_OTGSESSEND_EN (1 << 20) #define USBPHY_DATA_POLARITY (1 << 23) +struct usbhs_phy_data { + int port; /* 1 indexed port number */ + int reset_gpio; + int vcc_gpio; + bool vcc_polarity; /* 1 active high, 0 active low */ + void *platform_data; +}; + extern void usb_musb_init(struct omap_musb_board_data *board_data); extern void usbhs_init(struct usbhs_omap_platform_data *pdata); +extern int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); |