Merge branch 'next/pm' of git://git.linaro.org/people/arnd/arm-soc

* 'next/pm' of git://git.linaro.org/people/arnd/arm-soc: (66 commits)
  ARM: CSR: PM: use outer_resume to resume L2 cache
  ARM: CSR: call l2x0_of_init to init L2 cache of SiRFprimaII
  ARM: OMAP: voltage: voltage layer present, even when CONFIG_PM=n
  ARM: CSR: PM: add sleep entry for SiRFprimaII
  ARM: CSR: PM: save/restore irq status in suspend cycle
  ARM: CSR: PM: save/restore timer status in suspend cycle
  OMAP4: PM: TWL6030: add cmd register
  OMAP4: PM: TWL6030: fix ON/RET/OFF voltages
  OMAP4: PM: TWL6030: address 0V conversions
  OMAP4: PM: TWL6030: fix uv to voltage for >0x39
  OMAP4: PM: TWL6030: fix voltage conversion formula
  omap: voltage: add a stub header file for external/regulator use
  OMAP2+: VC: more registers are per-channel starting with OMAP5
  OMAP3+: voltage: update nominal voltage in voltdm_scale() not VC post-scale
  OMAP3+: voltage: rename omap_voltage_get_nom_volt -> voltdm_get_voltage
  OMAP3+: voltdm: final removal of omap_vdd_info
  OMAP3+: voltage: move/rename curr_volt from vdd_info into struct voltagedomain
  OMAP3+: voltage: rename scale and reset functions using voltdm_ prefix
  OMAP3+: VP: combine setting init voltage into common function
  OMAP3+: VP: remove unused omap_vp_get_curr_volt()
  ...

Fix up trivial conflict in arch/arm/mach-prima2/l2x0.c (code removal vs
edit)

1 files changed, 64 insertions, 0 deletions

diff --git a/arch/arm/mach-prima2/sleep.S b/arch/arm/mach-prima2/sleep.S
new file mode 100644
index 0000000..0745abc
--- /dev/null
+++ b/arch/arm/mach-prima2/sleep.S
@@ -0,0 +1,64 @@
+/*
+ * sleep mode for CSR SiRFprimaII
+ *
+ * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
+ *
+ * Licensed under GPLv2 or later.
+ */
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+#include <asm/assembler.h>
+
+#include "pm.h"
+
+#define DENALI_CTL_22_OFF	0x58
+#define DENALI_CTL_112_OFF	0x1c0
+
+	.text
+
+ENTRY(sirfsoc_finish_suspend)
+	@ r5: 	mem controller
+	ldr     r0, =sirfsoc_memc_base
+	ldr	r5, [r0]
+	@ r6: 	pwrc base offset
+	ldr     r0, =sirfsoc_pwrc_base
+	ldr	r6, [r0]
+	@ r7: 	rtc iobrg controller
+	ldr     r0, =sirfsoc_rtciobrg_base
+	ldr	r7, [r0]
+
+	@ Read the power control register and set the
+	@ sleep force bit.
+	add	r0, r6, #SIRFSOC_PWRC_PDN_CTRL
+	bl	__sirfsoc_rtc_iobrg_readl
+	orr	r0,r0,#SIRFSOC_PWR_SLEEPFORCE
+	add	r1, r6, #SIRFSOC_PWRC_PDN_CTRL
+	bl	sirfsoc_rtc_iobrg_pre_writel
+	mov	r1, #0x1
+
+	@ read the MEM ctl register and set the self
+	@ refresh bit
+
+	ldr	r2, [r5, #DENALI_CTL_22_OFF]
+	orr	r2, r2, #0x1
+
+	@ Following code has to run from cache since
+	@ the RAM is going to self refresh mode
+	.align 5
+	str	r2, [r5, #DENALI_CTL_22_OFF]
+
+1:
+	ldr	r4, [r5, #DENALI_CTL_112_OFF]
+	tst	r4, #0x1
+	bne	1b
+
+	@ write SLEEPFORCE through rtc iobridge
+
+	str	r1, [r7]
+	@ wait rtc io bridge sync
+1:
+	ldr	r3, [r7]
+	tst	r3, #0x01
+	bne	1b
+	b .