Merge branch 'linus' into stackprotector

Conflicts:
	arch/x86/kernel/Makefile
	include/asm-x86/pda.h

153 files changed, 20046 insertions, 3689 deletions

diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 5da7a68..f27f6b3 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -16,31 +16,45 @@ config CPU_PXA310
 config CPU_PXA320
 	bool "PXA320 (codename Monahans-P)"
 
+config CPU_PXA930
+	bool "PXA930 (codename Tavor-P)"
+
 endmenu
 
 endif
 
-choice
-	prompt "Select target board"
-
 config ARCH_GUMSTIX
 	bool "Gumstix XScale boards"
 	help
 	  Say Y here if you intend to run this kernel on a
 	  Gumstix Full Function Minature Computer.
 
+config MACH_GUMSTIX_F
+	bool "Basix, Connex, ws-200ax, ws-400ax systems"
+	depends on ARCH_GUMSTIX
+	select PXA25x
+
 config ARCH_LUBBOCK
 	bool "Intel DBPXA250 Development Platform"
 	select PXA25x
 	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_LOGICPD_PXA270
 	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_MAINSTONE
 	bool "Intel HCDDBBVA0 Development Platform"
 	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
 
 config ARCH_PXA_IDP
 	bool "Accelent Xscale IDP"
@@ -57,9 +71,71 @@ config PXA_SHARPSL
 	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
+
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
+
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
+
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
+
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
+	select PXA25x
+	select ISA
+	select I2C_GPIO
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
+
 config ARCH_PXA_ESERIES
 	bool "PXA based Toshiba e-series PDAs"
 	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
 
 config MACH_E330
 	bool "Toshiba e330"
@@ -69,10 +145,19 @@ config MACH_E330
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e330 family PDA.
 
+config MACH_E350
+	bool "Toshiba e350"
+	default y
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
+
 config MACH_E740
 	bool "Toshiba e740"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e740 family PDA.
@@ -81,6 +166,7 @@ config MACH_E750
 	bool "Toshiba e750"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e750 family PDA.
@@ -97,14 +183,47 @@ config MACH_E800
 	bool "Toshiba e800"
 	default y
 	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
 	  Say Y here if you intend to run this kernel on a Toshiba
 	  e800 family PDA.
 
+config TRIZEPS_PXA
+	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
+
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
 	select PXA27x
 
+config MACH_TRIZEPS4WL
+	bool "Keith und Koep Trizeps4-WL DIMM-Module"
+	depends on TRIZEPS_PXA
+	select TRIZEPS_PCMCIA
+	select PXA27x
+	select PXA_SSP
+
+choice
+	prompt "Select base board for Trizeps module"
+	depends on TRIZEPS_PXA
+
+config MACH_TRIZEPS_CONXS
+	bool "ConXS Eval Board"
+
+config MACH_TRIZEPS_UCONXS
+	bool "uConXS Eval Board"
+
+config MACH_TRIZEPS_ANY
+	bool "another Board"
+
+endchoice
+
+config TRIZEPS_PCMCIA
+	bool
+	help
+	  Enable PCMCIA support for Trizeps modules
+
 config MACH_EM_X270
 	bool "CompuLab EM-x270 platform"
 	select PXA27x
@@ -114,132 +233,150 @@ config MACH_COLIBRI
 	select PXA27x
 
 config MACH_ZYLONITE
-	bool "PXA3xx Development Platform"
+	bool "PXA3xx Development Platform (aka Zylonite)"
 	select PXA3xx
+	select PXA_SSP
+	select HAVE_PWM
 
 config MACH_LITTLETON
 	bool "PXA3xx Form Factor Platform (aka Littleton)"
 	select PXA3xx
 	select PXA_SSP
 
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
+	select PXA930
+
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
+	select PXA930
+
 config MACH_ARMCORE
-	bool "CompuLab CM-X270 modules"
+	bool "CompuLab CM-X255/CM-X270 modules"
 	select PXA27x
 	select IWMMXT
+	select ZONE_DMA if PCI
+	select PXA25x
+	select PXA_SSP
+
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
 
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
-	depends on ARCH_PXA
 	select PXA27x
 	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_MIOA701
+	bool "Mitac Mio A701 Support"
+	select PXA27x
+	select IWMMXT
+	select LEDS_GPIO
+	select HAVE_PWM
+	select GPIO_SYSFS
+	help
+	  Say Y here if you intend to run this kernel on a
+	  MIO A701. Currently there is only basic support
+	  for this PDA.
 
 config MACH_PCM027
 	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
 	select IWMMXT
+	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
 
-endchoice
+config ARCH_PXA_PALM
+	bool "PXA based Palm PDAs"
+	select HAVE_PWM
 
-choice
-	prompt "Used baseboard"
-	depends on MACH_PCM027
+config MACH_PALMTX
+	bool "Palm T|X"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on a Palm T|X
+	  handheld computer.
+
+config MACH_PALMZ72
+	bool "Palm Zire 72"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	help
+	  Say Y here if you intend to run this kernel on Palm Zire 72
+	  handheld computer.
 
 config MACH_PCM990_BASEBOARD
 	bool "PHYTEC PCM-990 development board"
-
-endchoice
-
-if PXA_SHARPSL
+	select HAVE_PWM
+	depends on MACH_PCM027
 
 choice
-	prompt "Select target Sharp Zaurus device range"
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
 
-config PXA_SHARPSL_25x
-	bool "Sharp PXA25x models (SL-5600, SL-C7xx and SL-C6000x)"
-	select PXA25x
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
 
-config PXA_SHARPSL_27x
-	bool "Sharp PXA270 models (SL-Cxx00)"
-	select PXA27x
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
 
-endchoice
-
-endif
-
-if ARCH_GUMSTIX
-
-choice
-	prompt "Select target Gumstix board"
-
-config MACH_GUMSTIX_F
-	bool "Basix, Connex, ws-200ax, ws-400ax systems"
-	select PXA25x
+config PCM990_DISPLAY_NONE
+	bool "no display"
 
 endchoice
 
-endif
+config MACH_AM200EPD
+	depends on MACH_GUMSTIX_F
+	bool "Enable AM200EPD board support"
 
+config PXA_EZX
+	bool "Motorola EZX Platform"
+	select PXA27x
+	select IWMMXT
+	select HAVE_PWM
 
-if MACH_TRIZEPS4
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
 
-choice
-	prompt "Select base board for Trizeps 4 module"
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_CONXS
-	bool "ConXS Eval Board"
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
 
-config MACH_TRIZEPS4_ANY
-	bool "another Board"
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
 
-endchoice
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
 
-endif
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
 
 endmenu
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL_25x
-	select SHARP_LOCOMO
-	select PXA_SSP
-
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL_25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL_25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL_25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL_27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL_27x
-	select PXA_SHARP_Cxx00
-
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL_27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL_25x
-
 config PXA25x
 	bool
 	help
@@ -273,4 +410,25 @@ config PXA_SSP
 	tristate
 	help
 	  Enable support for PXA2xx SSP ports
+
+config PXA_PWM
+	tristate
+	default BACKLIGHT_PWM
+	help
+	  Enable support for PXA2xx/PXA3xx PWM controllers
+
+config TOSA_BT
+	tristate "Control the state of built-in bluetooth chip on Sharp SL-6000"
+	depends on MACH_TOSA
+	select RFKILL
+	help
+	  This is a simple driver that is able to control
+	  the state of built in bluetooth chip on tosa.
+
+config PXA_HAVE_BOARD_IRQS
+	bool
+
+config PXA_HAVE_ISA_IRQS
+	bool
+
 endif
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index 0e6d05b..d31c997 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -4,38 +4,56 @@
 
 # Common support (must be linked before board specific support)
 obj-y				+= clock.o devices.o generic.o irq.o dma.o \
-				   time.o gpio.o
+				   time.o gpio.o reset.o
 obj-$(CONFIG_PM)		+= pm.o sleep.o standby.o
-obj-$(CONFIG_CPU_FREQ)		+= cpu-pxa.o
+
+ifeq ($(CONFIG_CPU_FREQ),y)
+obj-$(CONFIG_PXA25x)		+= cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA27x)		+= cpufreq-pxa2xx.o
+obj-$(CONFIG_PXA3xx)		+= cpufreq-pxa3xx.o
+endif
 
 # Generic drivers that other drivers may depend upon
 obj-$(CONFIG_PXA_SSP)		+= ssp.o
+obj-$(CONFIG_PXA_PWM)		+= pwm.o
 
 # SoC-specific code
-obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa25x.o
-obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa27x.o
+obj-$(CONFIG_PXA25x)		+= mfp-pxa2xx.o pxa2xx.o pxa25x.o
+obj-$(CONFIG_PXA27x)		+= mfp-pxa2xx.o pxa2xx.o pxa27x.o
 obj-$(CONFIG_PXA3xx)		+= mfp-pxa3xx.o pxa3xx.o smemc.o
 obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
+obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
 # Specific board support
 obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
+obj-$(CONFIG_MACH_AM200EPD)	+= am200epd.o
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
 obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri.o
-obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o corgi_pm.o
-obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o corgi_ssp.o corgi_lcd.o sharpsl_pm.o spitz_pm.o
-obj-$(CONFIG_MACH_AKITA)	+= akita-ioexp.o
-obj-$(CONFIG_MACH_POODLE)	+= poodle.o corgi_ssp.o
+obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
+obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
+obj-$(CONFIG_MACH_POODLE)	+= poodle.o
 obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
 obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
 obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
 obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
+obj-$(CONFIG_MACH_E330)		+= e330.o
+obj-$(CONFIG_MACH_E350)		+= e350.o
+obj-$(CONFIG_MACH_E740)		+= e740.o
+obj-$(CONFIG_MACH_E750)		+= e750.o
+obj-$(CONFIG_MACH_E400)		+= e400.o
+obj-$(CONFIG_MACH_E800)		+= e800.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
 
 ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-y				+= zylonite.o
@@ -43,18 +61,23 @@ ifeq ($(CONFIG_MACH_ZYLONITE),y)
   obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
 endif
 obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
 
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x270.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
 
 # Support for blinky lights
 led-y := leds.o
 led-$(CONFIG_ARCH_LUBBOCK)	+= leds-lubbock.o
 led-$(CONFIG_MACH_MAINSTONE)	+= leds-mainstone.o
 led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
-led-$(CONFIG_MACH_TRIZEPS4)	+= leds-trizeps4.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
 ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x270-pci.o
+obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
 endif
+
+obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/akita-ioexp.c b/arch/arm/mach-pxa/akita-ioexp.c
deleted file mode 100644
index 254892a..0000000
--- a/arch/arm/mach-pxa/akita-ioexp.c
+++ /dev/null
@@ -1,222 +0,0 @@
-/*
- * Support for the Extra GPIOs on the Sharp SL-C1000 (Akita)
- * (uses a Maxim MAX7310 8 Port IO Expander)
- *
- * Copyright 2005 Openedhand Ltd.
- *
- * Author: Richard Purdie <richard@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>
-#include <asm/arch/akita.h>
-
-/* MAX7310 Regiser Map */
-#define MAX7310_INPUT    0x00
-#define MAX7310_OUTPUT   0x01
-#define MAX7310_POLINV   0x02
-#define MAX7310_IODIR    0x03 /* 1 = Input, 0 = Output */
-#define MAX7310_TIMEOUT  0x04
-
-/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x18, I2C_CLIENT_END };
-
-/* I2C Magic */
-I2C_CLIENT_INSMOD;
-
-static int max7310_write(struct i2c_client *client, int address, int data);
-static struct i2c_client max7310_template;
-static void akita_ioexp_work(struct work_struct *private_);
-
-static struct device *akita_ioexp_device;
-static unsigned char ioexp_output_value = AKITA_IOEXP_IO_OUT;
-DECLARE_WORK(akita_ioexp, akita_ioexp_work);
-
-
-/*
- * MAX7310 Access
- */
-static int max7310_config(struct device *dev, int iomode, int polarity)
-{
-	int ret;
-	struct i2c_client *client = to_i2c_client(dev);
-
-	ret = max7310_write(client, MAX7310_POLINV, polarity);
-	if (ret < 0)
-		return ret;
-	ret = max7310_write(client, MAX7310_IODIR, iomode);
-	return ret;
-}
-
-static int max7310_set_ouputs(struct device *dev, int outputs)
-{
-	struct i2c_client *client = to_i2c_client(dev);
-
-	return max7310_write(client, MAX7310_OUTPUT, outputs);
-}
-
-/*
- * I2C Functions
- */
-static int max7310_write(struct i2c_client *client, int address, int value)
-{
-	u8 data[2];
-
-	data[0] = address & 0xff;
-	data[1] = value & 0xff;
-
-	if (i2c_master_send(client, data, 2) == 2)
-		return 0;
-	return -1;
-}
-
-static int max7310_detect(struct i2c_adapter *adapter, int address, int kind)
-{
-	struct i2c_client *new_client;
-	int err;
-
-	if (!(new_client = kmalloc(sizeof(struct i2c_client), GFP_KERNEL)))
-		return -ENOMEM;
-
-	max7310_template.adapter = adapter;
-	max7310_template.addr = address;
-
-	memcpy(new_client, &max7310_template, sizeof(struct i2c_client));
-
-	if ((err = i2c_attach_client(new_client))) {
-		kfree(new_client);
-		return err;
-	}
-
-	max7310_config(&new_client->dev, AKITA_IOEXP_IO_DIR, 0);
-	akita_ioexp_device = &new_client->dev;
-	schedule_work(&akita_ioexp);
-
-	return 0;
-}
-
-static int max7310_attach_adapter(struct i2c_adapter *adapter)
-{
-	return i2c_probe(adapter, &addr_data, max7310_detect);
-}
-
-static int max7310_detach_client(struct i2c_client *client)
-{
-	int err;
-
-	akita_ioexp_device = NULL;
-
-	if ((err = i2c_detach_client(client)))
-		return err;
-
-	kfree(client);
-	return 0;
-}
-
-static struct i2c_driver max7310_i2c_driver = {
-	.driver = {
-		.name	= "akita-max7310",
-	},
-	.id		= I2C_DRIVERID_AKITAIOEXP,
-	.attach_adapter	= max7310_attach_adapter,
-	.detach_client	= max7310_detach_client,
-};
-
-static struct i2c_client max7310_template = {
-	name:   "akita-max7310",
-	driver: &max7310_i2c_driver,
-};
-
-void akita_set_ioexp(struct device *dev, unsigned char bit)
-{
-	ioexp_output_value |= bit;
-
-	if (akita_ioexp_device)
-		schedule_work(&akita_ioexp);
-	return;
-}
-
-void akita_reset_ioexp(struct device *dev, unsigned char bit)
-{
-	ioexp_output_value &= ~bit;
-
-	if (akita_ioexp_device)
-		schedule_work(&akita_ioexp);
-	return;
-}
-
-EXPORT_SYMBOL(akita_set_ioexp);
-EXPORT_SYMBOL(akita_reset_ioexp);
-
-static void akita_ioexp_work(struct work_struct *private_)
-{
-	if (akita_ioexp_device)
-		max7310_set_ouputs(akita_ioexp_device, ioexp_output_value);
-}
-
-
-#ifdef CONFIG_PM
-static int akita_ioexp_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	flush_scheduled_work();
-	return 0;
-}
-
-static int akita_ioexp_resume(struct platform_device *pdev)
-{
-	schedule_work(&akita_ioexp);
-	return 0;
-}
-#else
-#define akita_ioexp_suspend NULL
-#define akita_ioexp_resume NULL
-#endif
-
-static int __init akita_ioexp_probe(struct platform_device *pdev)
-{
-	return i2c_add_driver(&max7310_i2c_driver);
-}
-
-static int akita_ioexp_remove(struct platform_device *pdev)
-{
-	i2c_del_driver(&max7310_i2c_driver);
-	return 0;
-}
-
-static struct platform_driver akita_ioexp_driver = {
-	.probe		= akita_ioexp_probe,
-	.remove		= akita_ioexp_remove,
-	.suspend	= akita_ioexp_suspend,
-	.resume		= akita_ioexp_resume,
-	.driver		= {
-		.name	= "akita-ioexp",
-	},
-};
-
-static int __init akita_ioexp_init(void)
-{
-	return platform_driver_register(&akita_ioexp_driver);
-}
-
-static void __exit akita_ioexp_exit(void)
-{
-	platform_driver_unregister(&akita_ioexp_driver);
-}
-
-MODULE_AUTHOR("Richard Purdie <rpurdie@openedhand.com>");
-MODULE_DESCRIPTION("Akita IO-Expander driver");
-MODULE_LICENSE("GPL");
-
-fs_initcall(akita_ioexp_init);
-module_exit(akita_ioexp_exit);
-
diff --git a/arch/arm/mach-pxa/am200epd.c b/arch/arm/mach-pxa/am200epd.c
new file mode 100644
index 0000000..b965085
--- /dev/null
+++ b/arch/arm/mach-pxa/am200epd.c
@@ -0,0 +1,374 @@
+/*
+ * am200epd.c -- Platform device for AM200 EPD kit
+ *
+ * Copyright (C) 2008, Jaya Kumar
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout is based on skeletonfb.c by James Simmons and Geert Uytterhoeven.
+ *
+ * This work was made possible by help and equipment support from E-Ink
+ * Corporation. http://support.eink.com/community
+ *
+ * This driver is written to be used with the Metronome display controller.
+ * on the AM200 EPD prototype kit/development kit with an E-Ink 800x600
+ * Vizplex EPD on a Gumstix board using the Lyre interface board.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <mach/pxafb.h>
+
+#include <video/metronomefb.h>
+
+static unsigned int panel_type = 6;
+static struct platform_device *am200_device;
+static struct metronome_board am200_board;
+
+static struct pxafb_mode_info am200_fb_mode_9inch7 = {
+	.pixclock	= 40000,
+	.xres		= 1200,
+	.yres		= 842,
+	.bpp		= 16,
+	.hsync_len	= 2,
+	.left_margin	= 2,
+	.right_margin	= 2,
+	.vsync_len	= 1,
+	.upper_margin	= 2,
+	.lower_margin	= 25,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_8inch = {
+	.pixclock	= 40000,
+	.xres		= 1088,
+	.yres		= 791,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 8,
+	.right_margin	= 30,
+	.vsync_len	= 8,
+	.upper_margin	= 10,
+	.lower_margin	= 8,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mode_info am200_fb_mode_6inch = {
+	.pixclock	= 40189,
+	.xres		= 832,
+	.yres		= 622,
+	.bpp		= 16,
+	.hsync_len	= 28,
+	.left_margin	= 34,
+	.right_margin	= 34,
+	.vsync_len	= 25,
+	.upper_margin	= 0,
+	.lower_margin	= 2,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct pxafb_mach_info am200_fb_info = {
+	.modes		= &am200_fb_mode_6inch,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_TYPE_COLOR_TFT | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(24),
+};
+
+/* register offsets for gpio control */
+#define LED_GPIO_PIN 51
+#define STDBY_GPIO_PIN 48
+#define RST_GPIO_PIN 49
+#define RDY_GPIO_PIN 32
+#define ERR_GPIO_PIN 17
+#define PCBPWR_GPIO_PIN 16
+static int gpios[] = { LED_GPIO_PIN , STDBY_GPIO_PIN , RST_GPIO_PIN,
+			RDY_GPIO_PIN, ERR_GPIO_PIN, PCBPWR_GPIO_PIN };
+static char *gpio_names[] = { "LED" , "STDBY" , "RST", "RDY", "ERR", "PCBPWR" };
+
+static int am200_init_gpio_regs(struct metronomefb_par *par)
+{
+	int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++) {
+		err = gpio_request(gpios[i], gpio_names[i]);
+		if (err) {
+			dev_err(&am200_device->dev, "failed requesting "
+				"gpio %s, err=%d\n", gpio_names[i], err);
+			goto err_req_gpio;
+		}
+	}
+
+	gpio_direction_output(LED_GPIO_PIN, 0);
+	gpio_direction_output(STDBY_GPIO_PIN, 0);
+	gpio_direction_output(RST_GPIO_PIN, 0);
+
+	gpio_direction_input(RDY_GPIO_PIN);
+	gpio_direction_input(ERR_GPIO_PIN);
+
+	gpio_direction_output(PCBPWR_GPIO_PIN, 0);
+
+	return 0;
+
+err_req_gpio:
+	while (i > 0)
+		gpio_free(gpios[i--]);
+
+	return err;
+}
+
+static void am200_cleanup(struct metronomefb_par *par)
+{
+	int i;
+
+	free_irq(IRQ_GPIO(RDY_GPIO_PIN), par);
+
+	for (i = 0; i < ARRAY_SIZE(gpios); i++)
+		gpio_free(gpios[i]);
+}
+
+static int am200_share_video_mem(struct fb_info *info)
+{
+	/* rough check if this is our desired fb and not something else */
+	if ((info->var.xres != am200_fb_info.modes->xres)
+		|| (info->var.yres != am200_fb_info.modes->yres))
+		return 0;
+
+	/* we've now been notified that we have our new fb */
+	am200_board.metromem = info->screen_base;
+	am200_board.host_fbinfo = info;
+
+	/* try to refcount host drv since we are the consumer after this */
+	if (!try_module_get(info->fbops->owner))
+		return -ENODEV;
+
+	return 0;
+}
+
+static int am200_unshare_video_mem(struct fb_info *info)
+{
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (info != am200_board.host_fbinfo)
+		return 0;
+
+	module_put(am200_board.host_fbinfo->fbops->owner);
+	return 0;
+}
+
+static int am200_fb_notifier_callback(struct notifier_block *self,
+				 unsigned long event, void *data)
+{
+	struct fb_event *evdata = data;
+	struct fb_info *info = evdata->info;
+
+	dev_dbg(&am200_device->dev, "ENTER %s\n", __func__);
+
+	if (event == FB_EVENT_FB_REGISTERED)
+		return am200_share_video_mem(info);
+	else if (event == FB_EVENT_FB_UNREGISTERED)
+		return am200_unshare_video_mem(info);
+
+	return 0;
+}
+
+static struct notifier_block am200_fb_notif = {
+	.notifier_call = am200_fb_notifier_callback,
+};
+
+/* this gets called as part of our init. these steps must be done now so
+ * that we can use set_pxa_fb_info */
+static void __init am200_presetup_fb(void)
+{
+	int fw;
+	int fh;
+	int padding_size;
+	int totalsize;
+
+	switch (panel_type) {
+	case 6:
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	case 8:
+		am200_fb_info.modes = &am200_fb_mode_8inch;
+		break;
+	case 97:
+		am200_fb_info.modes = &am200_fb_mode_9inch7;
+		break;
+	default:
+		dev_err(&am200_device->dev, "invalid panel_type selection,"
+						" setting to 6\n");
+		am200_fb_info.modes = &am200_fb_mode_6inch;
+		break;
+	}
+
+	/* the frame buffer is divided as follows:
+	command | CRC | padding
+	16kb waveform data | CRC | padding
+	image data | CRC
+	*/
+
+	fw = am200_fb_info.modes->xres;
+	fh = am200_fb_info.modes->yres;
+
+	/* waveform must be 16k + 2 for checksum */
+	am200_board.wfm_size = roundup(16*1024 + 2, fw);
+
+	padding_size = PAGE_SIZE + (4 * fw);
+
+	/* total is 1 cmd , 1 wfm, padding and image */
+	totalsize = fw + am200_board.wfm_size + padding_size + (fw*fh);
+
+	/* save this off because we're manipulating fw after this and
+	 * we'll need it when we're ready to setup the framebuffer */
+	am200_board.fw = fw;
+	am200_board.fh = fh;
+
+	/* the reason we do this adjustment is because we want to acquire
+	 * more framebuffer memory without imposing custom awareness on the
+	 * underlying pxafb driver */
+	am200_fb_info.modes->yres = DIV_ROUND_UP(totalsize, fw);
+
+	/* we divide since we told the LCD controller we're 16bpp */
+	am200_fb_info.modes->xres /= 2;
+
+	set_pxa_fb_info(&am200_fb_info);
+
+}
+
+/* this gets called by metronomefb as part of its init, in our case, we
+ * have already completed initial framebuffer init in presetup_fb so we
+ * can just setup the fb access pointers */
+static int am200_setup_fb(struct metronomefb_par *par)
+{
+	int fw;
+	int fh;
+
+	fw = am200_board.fw;
+	fh = am200_board.fh;
+
+	/* metromem was set up by the notifier in share_video_mem so now
+	 * we can use its value to calculate the other entries */
+	par->metromem_cmd = (struct metromem_cmd *) am200_board.metromem;
+	par->metromem_wfm = am200_board.metromem + fw;
+	par->metromem_img = par->metromem_wfm + am200_board.wfm_size;
+	par->metromem_img_csum = (u16 *) (par->metromem_img + (fw * fh));
+	par->metromem_dma = am200_board.host_fbinfo->fix.smem_start;
+
+	return 0;
+}
+
+static int am200_get_panel_type(void)
+{
+	return panel_type;
+}
+
+static irqreturn_t am200_handle_irq(int irq, void *dev_id)
+{
+	struct metronomefb_par *par = dev_id;
+
+	wake_up_interruptible(&par->waitq);
+	return IRQ_HANDLED;
+}
+
+static int am200_setup_irq(struct fb_info *info)
+{
+	int ret;
+
+	ret = request_irq(IRQ_GPIO(RDY_GPIO_PIN), am200_handle_irq,
+				IRQF_DISABLED|IRQF_TRIGGER_FALLING,
+				"AM200", info->par);
+	if (ret)
+		dev_err(&am200_device->dev, "request_irq failed: %d\n", ret);
+
+	return ret;
+}
+
+static void am200_set_rst(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(RST_GPIO_PIN, state);
+}
+
+static void am200_set_stdby(struct metronomefb_par *par, int state)
+{
+	gpio_set_value(STDBY_GPIO_PIN, state);
+}
+
+static int am200_wait_event(struct metronomefb_par *par)
+{
+	return wait_event_timeout(par->waitq, gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static int am200_wait_event_intr(struct metronomefb_par *par)
+{
+	return wait_event_interruptible_timeout(par->waitq,
+					gpio_get_value(RDY_GPIO_PIN), HZ);
+}
+
+static struct metronome_board am200_board = {
+	.owner			= THIS_MODULE,
+	.setup_irq		= am200_setup_irq,
+	.setup_io		= am200_init_gpio_regs,
+	.setup_fb		= am200_setup_fb,
+	.set_rst		= am200_set_rst,
+	.set_stdby		= am200_set_stdby,
+	.met_wait_event		= am200_wait_event,
+	.met_wait_event_intr	= am200_wait_event_intr,
+	.get_panel_type		= am200_get_panel_type,
+	.cleanup		= am200_cleanup,
+};
+
+static int __init am200_init(void)
+{
+	int ret;
+
+	/* before anything else, we request notification for any fb
+	 * creation events */
+	fb_register_client(&am200_fb_notif);
+
+	/* request our platform independent driver */
+	request_module("metronomefb");
+
+	am200_device = platform_device_alloc("metronomefb", -1);
+	if (!am200_device)
+		return -ENOMEM;
+
+	/* the am200_board that will be seen by metronomefb is a copy */
+	platform_device_add_data(am200_device, &am200_board,
+					sizeof(am200_board));
+
+	/* this _add binds metronomefb to am200. metronomefb refcounts am200 */
+	ret = platform_device_add(am200_device);
+
+	if (ret) {
+		platform_device_put(am200_device);
+		fb_unregister_client(&am200_fb_notif);
+		return ret;
+	}
+
+	am200_presetup_fb();
+
+	return 0;
+}
+
+module_param(panel_type, uint, 0);
+MODULE_PARM_DESC(panel_type, "Select the panel type: 6, 8, 97");
+
+module_init(am200_init);
+
+MODULE_DESCRIPTION("board driver for am200 metronome epd kit");
+MODULE_AUTHOR("Jaya Kumar");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c
index e97dc59..ca8e205 100644
--- a/arch/arm/mach-pxa/clock.c
+++ b/arch/arm/mach-pxa/clock.c
@@ -12,9 +12,9 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/hardware.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -47,6 +47,9 @@ struct clk *clk_get(struct device *dev, const char *id)
 		clk = p;
 	mutex_unlock(&clocks_mutex);
 
+	if (!IS_ERR(clk) && clk->ops == NULL)
+		clk = clk->other;
+
 	return clk;
 }
 EXPORT_SYMBOL(clk_get);
@@ -98,21 +101,6 @@ unsigned long clk_get_rate(struct clk *clk)
 EXPORT_SYMBOL(clk_get_rate);
 
 
-static void clk_gpio27_enable(struct clk *clk)
-{
-	pxa_gpio_mode(GPIO11_3_6MHz_MD);
-}
-
-static void clk_gpio27_disable(struct clk *clk)
-{
-}
-
-static const struct clkops clk_gpio27_ops = {
-	.enable		= clk_gpio27_enable,
-	.disable	= clk_gpio27_disable,
-};
-
-
 void clk_cken_enable(struct clk *clk)
 {
 	CKEN |= 1 << clk->cken;
@@ -128,14 +116,6 @@ const struct clkops clk_cken_ops = {
 	.disable	= clk_cken_disable,
 };
 
-static struct clk common_clks[] = {
-	{
-		.name		= "GPIO27_CLK",
-		.ops		= &clk_gpio27_ops,
-		.rate		= 3686400,
-	},
-};
-
 void clks_register(struct clk *clks, size_t num)
 {
 	int i;
@@ -146,9 +126,27 @@ void clks_register(struct clk *clks, size_t num)
 	mutex_unlock(&clocks_mutex);
 }
 
-static int __init clk_init(void)
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev)
 {
-	clks_register(common_clks, ARRAY_SIZE(common_clks));
+	struct clk *r = clk_lookup(dev, id);
+	struct clk *new;
+
+	if (!r)
+		return -ENODEV;
+
+	new = kzalloc(sizeof(struct clk), GFP_KERNEL);
+
+	if (!new)
+		return -ENOMEM;
+
+	new->name = alias;
+	new->dev = alias_dev;
+	new->other = r;
+
+	mutex_lock(&clocks_mutex);
+	list_add(&new->node, &clocks);
+	mutex_unlock(&clocks_mutex);
+
 	return 0;
 }
-arch_initcall(clk_init);
diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h
index bc6b77e..73be795 100644
--- a/arch/arm/mach-pxa/clock.h
+++ b/arch/arm/mach-pxa/clock.h
@@ -1,3 +1,5 @@
+#include <linux/list.h>
+
 struct clk;
 
 struct clkops {
@@ -15,6 +17,7 @@ struct clk {
 	unsigned int		cken;
 	unsigned int		delay;
 	unsigned int		enabled;
+	struct clk		*other;
 };
 
 #define INIT_CKEN(_name, _cken, _rate, _delay, _dev)	\
@@ -35,9 +38,56 @@ struct clk {
 		.cken	= CKEN_##_cken,			\
 	}
 
+/*
+ * This is a placeholder to alias one clock device+name pair
+ * to another struct clk.
+ */
+#define INIT_CKOTHER(_name, _other, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.other	= _other,			\
+	}
+
+#define INIT_CLK(_name, _ops, _rate, _delay, _dev)      \
+	{                                               \
+		.name   = _name,                        \
+		.dev    = _dev,                         \
+		.ops    = _ops,                         \
+		.rate   = _rate,                        \
+		.delay	= _delay,			\
+	}
+
 extern const struct clkops clk_cken_ops;
 
 void clk_cken_enable(struct clk *clk);
 void clk_cken_disable(struct clk *clk);
 
+#ifdef CONFIG_PXA3xx
+#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= &clk_pxa3xx_cken_ops,		\
+		.rate	= _rate,			\
+		.cken	= CKEN_##_cken,			\
+		.delay	= _delay,			\
+	}
+
+#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
+	{						\
+		.name	= _name,			\
+		.dev	= _dev,				\
+		.ops	= _ops,				\
+		.cken	= CKEN_##_cken,			\
+	}
+
+extern const struct clkops clk_pxa3xx_cken_ops;
+extern void clk_pxa3xx_cken_enable(struct clk *);
+extern void clk_pxa3xx_cken_disable(struct clk *);
+#endif
+
 void clks_register(struct clk *clks, size_t num);
+int clk_add_alias(char *alias, struct device *alias_dev, char *id,
+	struct device *dev);
+
diff --git a/arch/arm/mach-pxa/cm-x255.c b/arch/arm/mach-pxa/cm-x255.c
new file mode 100644
index 0000000..83a4cdf
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x255.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x255.c
+ *
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand-gpio.h>
+
+#include <linux/spi/spi.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/bitfield.h>
+
+#include "generic.h"
+
+#define GPIO_NAND_CS	(5)
+#define GPIO_NAND_ALE	(4)
+#define GPIO_NAND_CLE	(3)
+#define GPIO_NAND_RB	(10)
+
+static unsigned long cmx255_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO81_SSP2_CLK_OUT,
+	GPIO82_SSP2_FRM_OUT,
+	GPIO83_SSP2_TXD,
+	GPIO84_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO9_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO5_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO4_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND ALE */
+	GPIO3_GPIO	| MFP_LPM_DRIVE_LOW,	/* NAND CLE */
+	GPIO10_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO22_GPIO,	/* DM9000 interrupt */
+};
+
+#if defined(CONFIG_SPI_PXA2XX)
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct spi_board_info spi_board_info[] __initdata = {
+	[0] = {
+		.modalias	= "rtc-max6902",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+	},
+};
+
+static void __init cmx255_init_rtc(void)
+{
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(ARRAY_AND_SIZE(spi_board_info));
+}
+#else
+static inline void cmx255_init_rtc(void) {}
+#endif
+
+#if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE)
+static struct mtd_partition cmx255_nor_partitions[] = {
+	{
+		.name		= "ARMmon",
+		.size		= 0x00030000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "ARMmon setup block",
+		.size		= 0x00010000,
+		.offset		= MTDPART_OFS_APPEND,
+		.mask_flags	= MTD_WRITEABLE  /* force read-only */
+	} , {
+		.name		= "kernel",
+		.size		= 0x00160000,
+		.offset		= MTDPART_OFS_APPEND,
+	} , {
+		.name		= "ramdisk",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= MTDPART_OFS_APPEND
+	}
+};
+
+static struct physmap_flash_data cmx255_nor_flash_data[] = {
+	{
+		.width		= 2,	/* bankwidth in bytes */
+		.parts		= cmx255_nor_partitions,
+		.nr_parts	= ARRAY_SIZE(cmx255_nor_partitions)
+	}
+};
+
+static struct resource cmx255_nor_resource = {
+	.start	= PXA_CS0_PHYS,
+	.end	= PXA_CS0_PHYS + SZ_8M - 1,
+	.flags	= IORESOURCE_MEM,
+};
+
+static struct platform_device cmx255_nor = {
+	.name	= "physmap-flash",
+	.id	= -1,
+	.dev	= {
+		.platform_data = cmx255_nor_flash_data,
+	},
+	.resource = &cmx255_nor_resource,
+	.num_resources = 1,
+};
+
+static void __init cmx255_init_nor(void)
+{
+	platform_device_register(&cmx255_nor);
+}
+#else
+static inline void cmx255_init_nor(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+static struct resource cmx255_nand_resource[] = {
+	[0] = {
+		.start = PXA_CS1_PHYS,
+		.end   = PXA_CS1_PHYS + 11,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = PXA_CS5_PHYS,
+		.end   = PXA_CS5_PHYS + 3,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition cmx255_nand_parts[] = {
+	[0] = {
+		.name	= "cmx255-nand",
+		.size	= MTDPART_SIZ_FULL,
+		.offset	= 0,
+	},
+};
+
+static struct gpio_nand_platdata cmx255_nand_platdata = {
+	.gpio_nce = GPIO_NAND_CS,
+	.gpio_cle = GPIO_NAND_CLE,
+	.gpio_ale = GPIO_NAND_ALE,
+	.gpio_rdy = GPIO_NAND_RB,
+	.gpio_nwp = -1,
+	.parts = cmx255_nand_parts,
+	.num_parts = ARRAY_SIZE(cmx255_nand_parts),
+	.chip_delay = 25,
+};
+
+static struct platform_device cmx255_nand = {
+	.name		= "gpio-nand",
+	.num_resources	= ARRAY_SIZE(cmx255_nand_resource),
+	.resource	= cmx255_nand_resource,
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx255_nand_platdata,
+	}
+};
+
+static void __init cmx255_init_nand(void)
+{
+	platform_device_register(&cmx255_nand);
+}
+#else
+static inline void cmx255_init_nand(void) {}
+#endif
+
+void __init cmx255_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx255_pin_config));
+
+	cmx255_init_rtc();
+	cmx255_init_nor();
+	cmx255_init_nand();
+}
diff --git a/arch/arm/mach-pxa/cm-x270-pci.h b/arch/arm/mach-pxa/cm-x270-pci.h
deleted file mode 100644
index ffe37b6..0000000
--- a/arch/arm/mach-pxa/cm-x270-pci.h
+++ /dev/null
@@ -1,13 +0,0 @@
-extern void __cmx270_pci_init_irq(void);
-extern void __cmx270_pci_suspend(void);
-extern void __cmx270_pci_resume(void);
-
-#ifdef CONFIG_PCI
-#define cmx270_pci_init_irq __cmx270_pci_init_irq
-#define cmx270_pci_suspend __cmx270_pci_suspend
-#define cmx270_pci_resume __cmx270_pci_resume
-#else
-#define cmx270_pci_init_irq() do {} while (0)
-#define cmx270_pci_suspend() do {} while (0)
-#define cmx270_pci_resume() do {} while (0)
-#endif
diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c
index f5851d1..a82dad1 100644
--- a/arch/arm/mach-pxa/cm-x270.c
+++ b/arch/arm/mach-pxa/cm-x270.c
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-pxa/cm-x270.c
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -9,91 +9,132 @@
  * published by the Free Software Foundation.
  */
 
-#include <linux/types.h>
-#include <linux/pm.h>
-#include <linux/fb.h>
 #include <linux/platform_device.h>
-#include <linux/irq.h>
 #include <linux/sysdev.h>
-#include <linux/io.h>
-#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
 
-#include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-#include <linux/serial_8250.h>
-
 #include <video/mbxfb.h>
 
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/cm-x270.h>
-
-#include <asm/hardware/it8152.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
-#include "cm-x270-pci.h"
 
+/* physical address if local-bus attached devices */
 #define RTC_PHYS_BASE		(PXA_CS1_PHYS + (5 << 22))
-#define DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
-
-static struct resource cmx270_dm9k_resource[] = {
-	[0] = {
-		.start = DM9000_PHYS_BASE,
-		.end   = DM9000_PHYS_BASE + 4,
-		.flags = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start = DM9000_PHYS_BASE + 8,
-		.end   = DM9000_PHYS_BASE + 8 + 500,
-		.flags = IORESOURCE_MEM,
-	},
-	[2] = {
-		.start = CMX270_ETHIRQ,
-		.end   = CMX270_ETHIRQ,
-		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	}
-};
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data cmx270_dm9k_platdata = {
-	.flags		= DM9000_PLATF_32BITONLY,
+/* GPIO IRQ usage */
+#define GPIO83_MMC_IRQ		(83)
+
+#define CMX270_MMC_IRQ		IRQ_GPIO(GPIO83_MMC_IRQ)
+
+/* MMC power enable */
+#define GPIO105_MMC_POWER	(105)
+
+static unsigned long cmx270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO87_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO0_GPIO	| WAKEUP_ON_EDGE_BOTH,
+	GPIO105_GPIO	| MFP_LPM_DRIVE_HIGH,	/* MMC/SD power */
+	GPIO53_GPIO,				/* PC card reset */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO89_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO10_GPIO,	/* DM9000 interrupt */
+	GPIO83_GPIO,	/* MMC card detect */
 };
 
-/* Ethernet device */
-static struct platform_device cmx270_device_dm9k = {
-	.name		= "dm9000",
-	.id		= 0,
-	.num_resources	= ARRAY_SIZE(cmx270_dm9k_resource),
-	.resource	= cmx270_dm9k_resource,
-	.dev		= {
-		.platform_data = &cmx270_dm9k_platdata,
-	}
-};
-
-/* audio device */
-static struct platform_device cmx270_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
-/* touchscreen controller */
-static struct platform_device cmx270_ts_device = {
-	.name		= "ucb1400_ts",
-	.id		= -1,
-};
-
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource cmx270_v3020_resource[] = {
 	[0] = {
 		.start = RTC_PHYS_BASE,
@@ -116,28 +157,29 @@ static struct platform_device cmx270_rtc_device = {
 	}
 };
 
-/*
- * CM-X270 LEDs
- */
-static struct platform_device cmx270_led_device = {
-	.name		= "cm-x270-led",
-	.id		= -1,
-};
+static void __init cmx270_init_rtc(void)
+{
+	platform_device_register(&cmx270_rtc_device);
+}
+#else
+static inline void cmx2xx_init_rtc(void) {}
+#endif
 
 /* 2700G graphics */
+#if defined(CONFIG_FB_MBX) || defined(CONFIG_FB_MBX_MODULE)
 static u64 fb_dma_mask = ~(u64)0;
 
 static struct resource cmx270_2700G_resource[] = {
 	/* frame buffer memory including ODFB and External SDRAM */
 	[0] = {
-		.start = MARATHON_PHYS,
-		.end   = MARATHON_PHYS + 0x02000000,
+		.start = PXA_CS2_PHYS,
+		.end   = PXA_CS2_PHYS + 0x01ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 	/* Marathon registers */
 	[1] = {
-		.start = MARATHON_PHYS + 0x03fe0000,
-		.end   = MARATHON_PHYS + 0x03ffffff,
+		.start = PXA_CS2_PHYS + 0x03fe0000,
+		.end   = PXA_CS2_PHYS + 0x03ffffff,
 		.flags = IORESOURCE_MEM,
 	},
 };
@@ -205,297 +247,52 @@ static struct platform_device cmx270_2700G = {
 	.id		= -1,
 };
 
-static u64 ata_dma_mask = ~(u64)0;
-
-static struct platform_device cmx270_ata = {
-	.name = "pata_cm_x270",
-	.id = -1,
-	.dev		= {
-		.dma_mask	= &ata_dma_mask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-};
-
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&cmx270_device_dm9k,
-	&cmx270_audio_device,
-	&cmx270_rtc_device,
-	&cmx270_2700G,
-	&cmx270_led_device,
-	&cmx270_ts_device,
-	&cmx270_ata,
-};
-
-/* Map PCI companion and IDE/General Purpose CS statically */
-static struct map_desc cmx270_io_desc[] __initdata = {
-	[0] = { /* IDE/general purpose space */
-		.virtual	= CMX270_IDE104_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IDE104_PHYS),
-		.length		= SZ_64M - SZ_8M,
-		.type		= MT_DEVICE
-	},
-	[1] = { /* PCI bridge */
-		.virtual	= CMX270_IT8152_VIRT,
-		.pfn		= __phys_to_pfn(CMX270_IT8152_PHYS),
-		.length		= SZ_64M,
-		.type		= MT_DEVICE
-	},
-};
-
-/*
-  Display definitions
-  keep these for backwards compatibility, although symbolic names (as
-  e.g. in lpd270.c) looks better
-*/
-#define MTYPE_STN320x240	0
-#define MTYPE_TFT640x480	1
-#define MTYPE_CRT640x480	2
-#define MTYPE_CRT800x600	3
-#define MTYPE_TFT320x240	6
-#define MTYPE_STN640x480	7
-
-static struct pxafb_mode_info generic_stn_320x240_mode = {
-	.pixclock	= 76923,
-	.bpp		= 8,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 3,
-	.vsync_len	= 2,
-	.left_margin	= 3,
-	.upper_margin	= 0,
-	.right_margin	= 3,
-	.lower_margin	= 0,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_320x240 = {
-	.modes		= &generic_stn_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x03) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 60,
-	.vsync_len	= 2,
-	.left_margin	= 70,
-	.upper_margin	= 10,
-	.right_margin	= 70,
-	.lower_margin	= 5,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_640x480 = {
-	.modes		= &generic_tft_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_640x480_mode = {
-	.pixclock	= 38461,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 81,
-	.upper_margin	= 33,
-	.right_margin	= 16,
-	.lower_margin	= 10,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_640x480 = {
-	.modes		= &generic_crt_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x01) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_crt_800x600_mode = {
-	.pixclock	= 28846,
-	.bpp		= 8,
-	.xres		= 800,
-	.yres	  	= 600,
-	.hsync_len	= 63,
-	.vsync_len	= 2,
-	.left_margin	= 26,
-	.upper_margin	= 21,
-	.right_margin	= 26,
-	.lower_margin	= 11,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_crt_800x600 = {
-	.modes		= &generic_crt_800x600_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_tft_320x240_mode = {
-	.pixclock	= 134615,
-	.bpp		= 16,
-	.xres		= 320,
-	.yres		= 240,
-	.hsync_len	= 63,
-	.vsync_len	= 7,
-	.left_margin	= 75,
-	.upper_margin	= 0,
-	.right_margin	= 15,
-	.lower_margin	= 15,
-	.sync		= 0,
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_tft_320x240 = {
-	.modes		= &generic_tft_320x240_mode,
-	.num_modes	= 1,
-	.lccr0		= (LCCR0_PAS),
-	.lccr3		= (LCCR3_PixClkDiv(0x06) |
-			   LCCR3_Acb(0xff) |
-			   LCCR3_PCP),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mode_info generic_stn_640x480_mode = {
-	.pixclock	= 57692,
-	.bpp		= 8,
-	.xres		= 640,
-	.yres		= 480,
-	.hsync_len	= 4,
-	.vsync_len	= 2,
-	.left_margin	= 10,
-	.upper_margin	= 5,
-	.right_margin	= 10,
-	.lower_margin	= 5,
-	.sync		= (FB_SYNC_HOR_HIGH_ACT |
-			   FB_SYNC_VERT_HIGH_ACT),
-	.cmap_greyscale = 0,
-};
-
-static struct pxafb_mach_info generic_stn_640x480 = {
-	.modes		= &generic_stn_640x480_mode,
-	.num_modes	= 1,
-	.lccr0		= 0,
-	.lccr3		= (LCCR3_PixClkDiv(0x02) |
-			   LCCR3_Acb(0xff)),
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-};
-
-static struct pxafb_mach_info *cmx270_display = &generic_crt_640x480;
-
-static int __init cmx270_set_display(char *str)
+static void __init cmx270_init_2700G(void)
 {
-	int disp_type = simple_strtol(str, NULL, 0);
-	switch (disp_type) {
-	case MTYPE_STN320x240:
-		cmx270_display = &generic_stn_320x240;
-		break;
-	case MTYPE_TFT640x480:
-		cmx270_display = &generic_tft_640x480;
-		break;
-	case MTYPE_CRT640x480:
-		cmx270_display = &generic_crt_640x480;
-		break;
-	case MTYPE_CRT800x600:
-		cmx270_display = &generic_crt_800x600;
-		break;
-	case MTYPE_TFT320x240:
-		cmx270_display = &generic_tft_320x240;
-		break;
-	case MTYPE_STN640x480:
-		cmx270_display = &generic_stn_640x480;
-		break;
-	default: /* fallback to CRT 640x480 */
-		cmx270_display = &generic_crt_640x480;
-		break;
-	}
-	return 1;
+	platform_device_register(&cmx270_2700G);
 }
-
-/*
-   This should be done really early to get proper configuration for
-   frame buffer.
-   Indeed, pxafb parameters can be used istead, but CM-X270 bootloader
-   has limitied line length for kernel command line, and also it will
-   break compatibitlty with proprietary releases already in field.
-*/
-__setup("monitor=", cmx270_set_display);
+#else
+static inline void cmx270_init_2700G(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
-static int cmx270_ohci_init(struct device *dev)
-{
-	/* Set the Power Control Polarity Low */
-	UHCHR = (UHCHR | UHCHR_PCPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
-	return 0;
-}
-
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static struct pxaohci_platform_data cmx270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= cmx270_ohci_init,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 };
 
+static void __init cmx270_init_ohci(void)
+{
+	pxa_set_ohci_info(&cmx270_ohci_platform_data);
+}
+#else
+static inline void cmx270_init_ohci(void) {}
+#endif
 
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int cmx270_mci_init(struct device *dev,
 			   irq_handler_t cmx270_detect_int,
 			   void *data)
 {
 	int err;
 
-	/*
-	 * setup GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* SB-X270 uses GPIO105 as SD power enable */
-	pxa_gpio_mode(105 | GPIO_OUT);
+	err = gpio_request(GPIO105_MMC_POWER, "MMC/SD power");
+	if (err) {
+		dev_warn(dev, "power gpio unavailable\n");
+		return err;
+	}
 
-	/* card detect IRQ on GPIO 83 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_MMC_IRQ));
+	gpio_direction_output(GPIO105_MMC_POWER, 0);
 
 	err = request_irq(CMX270_MMC_IRQ, cmx270_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "cmx270_mci_init: MMC/SD: can't"
-		       " request MMC card detect IRQ\n");
+	if (err) {
+		gpio_free(GPIO105_MMC_POWER);
+		dev_err(dev, "cmx270_mci_init: MMC/SD: can't"
+			" request MMC card detect IRQ\n");
+	}
 
 	return err;
 }
@@ -505,17 +302,18 @@ static void cmx270_mci_setpower(struct device *dev, unsigned int vdd)
 	struct pxamci_platform_data *p_d = dev->platform_data;
 
 	if ((1 << vdd) & p_d->ocr_mask) {
-		printk(KERN_DEBUG "%s: on\n", __func__);
-		GPCR(105) = GPIO_bit(105);
+		dev_dbg(dev, "power on\n");
+		gpio_set_value(GPIO105_MMC_POWER, 0);
 	} else {
-		GPSR(105) = GPIO_bit(105);
-		printk(KERN_DEBUG "%s: off\n", __func__);
+		gpio_set_value(GPIO105_MMC_POWER, 1);
+		dev_dbg(dev, "power off\n");
 	}
 }
 
 static void cmx270_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CMX270_MMC_IRQ, data);
+	gpio_free(GPIO105_MMC_POWER);
 }
 
 static struct pxamci_platform_data cmx270_mci_platform_data = {
@@ -525,120 +323,20 @@ static struct pxamci_platform_data cmx270_mci_platform_data = {
 	.exit		= cmx270_mci_exit,
 };
 
-#ifdef CONFIG_PM
-static unsigned long sleep_save_msc[10];
-
-static int cmx270_suspend(struct sys_device *dev, pm_message_t state)
-{
-	cmx270_pci_suspend();
-
-	/* save MSC registers */
-	sleep_save_msc[0] = MSC0;
-	sleep_save_msc[1] = MSC1;
-	sleep_save_msc[2] = MSC2;
-
-	/* setup power saving mode registers */
-	PCFR = 0x0;
-	PSLR = 0xff400000;
-	PMCR  = 0x00000005;
-	PWER  = 0x80000000;
-	PFER  = 0x00000000;
-	PRER  = 0x00000000;
-	PGSR0 = 0xC0018800;
-	PGSR1 = 0x004F0002;
-	PGSR2 = 0x6021C000;
-	PGSR3 = 0x00020000;
-
-	return 0;
-}
-
-static int cmx270_resume(struct sys_device *dev)
-{
-	cmx270_pci_resume();
-
-	/* restore MSC registers */
-	MSC0 = sleep_save_msc[0];
-	MSC1 = sleep_save_msc[1];
-	MSC2 = sleep_save_msc[2];
-
-	return 0;
-}
-
-static struct sysdev_class cmx270_pm_sysclass = {
-	.name = "pm",
-	.resume = cmx270_resume,
-	.suspend = cmx270_suspend,
-};
-
-static struct sys_device cmx270_pm_device = {
-	.cls = &cmx270_pm_sysclass,
-};
-
-static int __init cmx270_pm_init(void)
+static void __init cmx270_init_mmc(void)
 {
-	int error;
-	error = sysdev_class_register(&cmx270_pm_sysclass);
-	if (error == 0)
-		error = sysdev_register(&cmx270_pm_device);
-	return error;
+	pxa_set_mci_info(&cmx270_mci_platform_data);
 }
 #else
-static int __init cmx270_pm_init(void) { return 0; }
+static inline void cmx270_init_mmc(void) {}
 #endif
 
-static void __init cmx270_init(void)
+void __init cmx270_init(void)
 {
-	cmx270_pm_init();
-
-	set_pxa_fb_info(cmx270_display);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(cmx270_pin_config));
 
-	/* register CM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&cmx270_mci_platform_data);
-	pxa_set_ohci_info(&cmx270_ohci_platform_data);
-
-	/* This enables the STUART */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
-
-	/* This enables the BTUART  */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+	cmx270_init_rtc();
+	cmx270_init_mmc();
+	cmx270_init_ohci();
+	cmx270_init_2700G();
 }
-
-static void __init cmx270_init_irq(void)
-{
-	pxa27x_init_irq();
-
-
-	cmx270_pci_init_irq();
-
-	/* Setup interrupt for dm9000 */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_ETHIRQ));
-	set_irq_type(CMX270_ETHIRQ, IRQT_RISING);
-
-	/* Setup interrupt for 2700G */
-	pxa_gpio_mode(IRQ_TO_GPIO(CMX270_GFXIRQ));
-	set_irq_type(CMX270_GFXIRQ, IRQT_FALLING);
-}
-
-static void __init cmx270_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(cmx270_io_desc, ARRAY_SIZE(cmx270_io_desc));
-}
-
-
-MACHINE_START(ARMCORE, "Compulab CM-x270")
-	.boot_params	= 0xa0000100,
-	.phys_io	= 0x40000000,
-	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
-	.map_io		= cmx270_map_io,
-	.init_irq	= cmx270_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= cmx270_init,
-MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x270-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c
index ac7f05f..3156b25 100644
--- a/arch/arm/mach-pxa/cm-x270-pci.c
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.c
@@ -1,11 +1,11 @@
 /*
- * linux/arch/arm/mach-pxa/cm-x270-pci.c
+ * linux/arch/arm/mach-pxa/cm-x2xx-pci.c
  *
  * PCI bios-type initialisation for PCI machines
  *
  * Bits taken from various places.
  *
- * Copyright (C) 2007 Compulab, Ltd.
+ * Copyright (C) 2007, 2008 Compulab, Ltd.
  * Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,16 +19,16 @@
 #include <linux/device.h>
 #include <linux/platform_device.h>
 #include <linux/irq.h>
+#include <linux/gpio.h>
 
 #include <asm/mach/pci.h>
-#include <asm/arch/cm-x270.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 #include <asm/hardware/it8152.h>
 
-unsigned long it8152_base_address = CMX270_IT8152_VIRT;
+unsigned long it8152_base_address;
+static int cmx2xx_it8152_irq_gpio;
 
 /*
  * Only first 64MB of memory can be accessed via PCI.
@@ -36,47 +36,50 @@ unsigned long it8152_base_address = CMX270_IT8152_VIRT;
  * This is really ugly and we need a better way of specifying
  * DMA-capable regions of memory.
  */
-void __init cmx270_pci_adjust_zones(int node, unsigned long *zone_size,
+void __init cmx2xx_pci_adjust_zones(int node, unsigned long *zone_size,
 	unsigned long *zhole_size)
 {
 	unsigned int sz = SZ_64M >> PAGE_SHIFT;
 
-	pr_info("Adjusting zones for CM-x270\n");
+	if (machine_is_armcore()) {
+		pr_info("Adjusting zones for CM-X2XX\n");
 
-	/*
-	 * Only adjust if > 64M on current system
-	 */
-	if (node || (zone_size[0] <= sz))
-		return;
-
-	zone_size[1] = zone_size[0] - sz;
-	zone_size[0] = sz;
-	zhole_size[1] = zhole_size[0];
-	zhole_size[0] = 0;
+		/*
+		 * Only adjust if > 64M on current system
+		 */
+		if (node || (zone_size[0] <= sz))
+			return;
+
+		zone_size[1] = zone_size[0] - sz;
+		zone_size[0] = sz;
+		zhole_size[1] = zhole_size[0];
+		zhole_size[0] = 0;
+	}
 }
 
-static void cmx270_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
+static void cmx2xx_it8152_irq_demux(unsigned int irq, struct irq_desc *desc)
 {
 	/* clear our parent irq */
-	GEDR(GPIO_IT8152_IRQ) = GPIO_bit(GPIO_IT8152_IRQ);
+	GEDR(cmx2xx_it8152_irq_gpio) = GPIO_bit(cmx2xx_it8152_irq_gpio);
 
 	it8152_irq_demux(irq, desc);
 }
 
-void __cmx270_pci_init_irq(void)
+void __cmx2xx_pci_init_irq(int irq_gpio)
 {
 	it8152_init_irq();
-	pxa_gpio_mode(IRQ_TO_GPIO(GPIO_IT8152_IRQ));
-	set_irq_type(IRQ_GPIO(GPIO_IT8152_IRQ), IRQT_RISING);
 
-	set_irq_chained_handler(IRQ_GPIO(GPIO_IT8152_IRQ),
-				cmx270_it8152_irq_demux);
+	cmx2xx_it8152_irq_gpio = irq_gpio;
+
+	set_irq_type(gpio_to_irq(irq_gpio), IRQ_TYPE_EDGE_RISING);
+
+	set_irq_chained_handler(gpio_to_irq(irq_gpio), cmx2xx_it8152_irq_demux);
 }
 
 #ifdef CONFIG_PM
 static unsigned long sleep_save_ite[10];
 
-void __cmx270_pci_suspend(void)
+void __cmx2xx_pci_suspend(void)
 {
 	/* save ITE state */
 	sleep_save_ite[0] = __raw_readl(IT8152_INTC_PDCNIMR);
@@ -88,7 +91,7 @@ void __cmx270_pci_suspend(void)
 	__raw_writel((0), IT8152_INTC_LPCNIRR);
 }
 
-void __cmx270_pci_resume(void)
+void __cmx2xx_pci_resume(void)
 {
 	/* restore IT8152 state */
 	__raw_writel((sleep_save_ite[0]), IT8152_INTC_PDCNIMR);
@@ -96,12 +99,12 @@ void __cmx270_pci_resume(void)
 	__raw_writel((sleep_save_ite[2]), IT8152_INTC_LPNIAR);
 }
 #else
-void cmx270_pci_suspend(void) {}
-void cmx270_pci_resume(void) {}
+void cmx2xx_pci_suspend(void) {}
+void cmx2xx_pci_resume(void) {}
 #endif
 
 /* PCI IRQ mapping*/
-static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	int irq;
 
@@ -113,14 +116,14 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 
 	/*
 	  Here comes the ugly part. The routing is baseboard specific,
-	  but defining a platform for each possible base of CM-x270 is
-	  unrealistic. Here we keep mapping for ATXBase and SB-x270.
+	  but defining a platform for each possible base of CM-X2XX is
+	  unrealistic. Here we keep mapping for ATXBase and SB-X2XX.
 	*/
 	/* ATXBASE PCI slot */
 	if (slot == 7)
 		return IT8152_PCI_INTA;
 
-	/* ATXBase/SB-x270 CardBus */
+	/* ATXBase/SB-X2XX CardBus */
 	if (slot == 8 || slot == 0)
 		return IT8152_PCI_INTB;
 
@@ -128,7 +131,11 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	if (slot == 9)
 		return IT8152_PCI_INTA;
 
-	/* SB-x270 Ethernet */
+	/* CM-x255 Onboard Ethernet */
+	if (slot == 15)
+		return IT8152_PCI_INTC;
+
+	/* SB-x2xx Ethernet */
 	if (slot == 16)
 		return IT8152_PCI_INTA;
 
@@ -141,9 +148,9 @@ static int __init cmx270_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 	return(0);
 }
 
-static void cmx270_pci_preinit(void)
+static void cmx2xx_pci_preinit(void)
 {
-	pr_info("Initializing CM-X270 PCI subsystem\n");
+	pr_info("Initializing CM-X2XX PCI subsystem\n");
 
 	__raw_writel(0x800, IT8152_PCI_CFG_ADDR);
 	if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) {
@@ -197,21 +204,21 @@ static void cmx270_pci_preinit(void)
 	}
 }
 
-static struct hw_pci cmx270_pci __initdata = {
+static struct hw_pci cmx2xx_pci __initdata = {
 	.swizzle	= pci_std_swizzle,
-	.map_irq	= cmx270_pci_map_irq,
+	.map_irq	= cmx2xx_pci_map_irq,
 	.nr_controllers	= 1,
 	.setup		= it8152_pci_setup,
 	.scan		= it8152_pci_scan_bus,
-	.preinit	= cmx270_pci_preinit,
+	.preinit	= cmx2xx_pci_preinit,
 };
 
-static int __init cmx270_init_pci(void)
+static int __init cmx2xx_init_pci(void)
 {
 	if (machine_is_armcore())
-		pci_common_init(&cmx270_pci);
+		pci_common_init(&cmx2xx_pci);
 
 	return 0;
 }
 
-subsys_initcall(cmx270_init_pci);
+subsys_initcall(cmx2xx_init_pci);
diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.h b/arch/arm/mach-pxa/cm-x2xx-pci.h
new file mode 100644
index 0000000..e24aad2
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx-pci.h
@@ -0,0 +1,13 @@
+extern void __cmx2xx_pci_init_irq(int irq_gpio);
+extern void __cmx2xx_pci_suspend(void);
+extern void __cmx2xx_pci_resume(void);
+
+#ifdef CONFIG_PCI
+#define cmx2xx_pci_init_irq(x) __cmx2xx_pci_init_irq(x)
+#define cmx2xx_pci_suspend(x) __cmx2xx_pci_suspend(x)
+#define cmx2xx_pci_resume(x) __cmx2xx_pci_resume(x)
+#else
+#define cmx2xx_pci_init_irq(x) do {} while (0)
+#define cmx2xx_pci_suspend(x) do {} while (0)
+#define cmx2xx_pci_resume(x) do {} while (0)
+#endif
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
new file mode 100644
index 0000000..0b3ce3b
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -0,0 +1,531 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x2xx.c
+ *
+ * Copyright (C) 2008 CompuLab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+#include <asm/mach/map.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+
+#include <asm/hardware/it8152.h>
+
+#include "generic.h"
+#include "cm-x2xx-pci.h"
+
+extern void cmx255_init(void);
+extern void cmx270_init(void);
+
+/* virtual addresses for statically mapped regions */
+#define CMX2XX_VIRT_BASE	(0xe8000000)
+#define CMX2XX_IT8152_VIRT	(CMX2XX_VIRT_BASE)
+
+/* physical address if local-bus attached devices */
+#define CMX255_DM9000_PHYS_BASE (PXA_CS1_PHYS + (8 << 22))
+#define CMX270_DM9000_PHYS_BASE	(PXA_CS1_PHYS + (6 << 22))
+
+/* leds */
+#define CMX255_GPIO_RED		(27)
+#define CMX255_GPIO_GREEN	(32)
+#define CMX270_GPIO_RED		(93)
+#define CMX270_GPIO_GREEN	(94)
+
+/* GPIO IRQ usage */
+#define GPIO22_ETHIRQ		(22)
+#define GPIO10_ETHIRQ		(10)
+#define CMX255_GPIO_IT8152_IRQ	(0)
+#define CMX270_GPIO_IT8152_IRQ	(22)
+
+#define CMX255_ETHIRQ		IRQ_GPIO(GPIO22_ETHIRQ)
+#define CMX270_ETHIRQ		IRQ_GPIO(GPIO10_ETHIRQ)
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource cmx255_dm9000_resource[] = {
+	[0] = {
+		.start = CMX255_DM9000_PHYS_BASE,
+		.end   = CMX255_DM9000_PHYS_BASE + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CMX255_DM9000_PHYS_BASE + 4,
+		.end   = CMX255_DM9000_PHYS_BASE + 4 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = CMX255_ETHIRQ,
+		.end   = CMX255_ETHIRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct resource cmx270_dm9000_resource[] = {
+	[0] = {
+		.start = CMX270_DM9000_PHYS_BASE,
+		.end   = CMX270_DM9000_PHYS_BASE + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = CMX270_DM9000_PHYS_BASE + 8,
+		.end   = CMX270_DM9000_PHYS_BASE + 8 + 500,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = CMX270_ETHIRQ,
+		.end   = CMX270_ETHIRQ,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data cmx270_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
+static struct platform_device cmx2xx_dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cmx270_dm9000_resource),
+	.dev		= {
+		.platform_data = &cmx270_dm9000_platdata,
+	}
+};
+
+static void __init cmx2xx_init_dm9000(void)
+{
+	if (cpu_is_pxa25x())
+		cmx2xx_dm9000_device.resource = cmx255_dm9000_resource;
+	else
+		cmx2xx_dm9000_device.resource = cmx270_dm9000_resource;
+	platform_device_register(&cmx2xx_dm9000_device);
+}
+#else
+static inline void cmx2xx_init_dm9000(void) {}
+#endif
+
+/* UCB1400 touchscreen controller */
+#if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE)
+static struct platform_device cmx2xx_ts_device = {
+	.name		= "ucb1400_ts",
+	.id		= -1,
+};
+
+static void __init cmx2xx_init_touchscreen(void)
+{
+	platform_device_register(&cmx2xx_ts_device);
+}
+#else
+static inline void cmx2xx_init_touchscreen(void) {}
+#endif
+
+/* CM-X270 LEDs */
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cmx2xx_leds[] = {
+	[0] = {
+		.name = "cm-x2xx:red",
+		.default_trigger = "nand-disk",
+		.active_low = 1,
+	},
+	[1] = {
+		.name = "cm-x2xx:green",
+		.default_trigger = "heartbeat",
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cmx2xx_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cmx2xx_leds),
+	.leds = cmx2xx_leds,
+};
+
+static struct platform_device cmx2xx_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cmx2xx_gpio_led_pdata,
+	},
+};
+
+static void __init cmx2xx_init_leds(void)
+{
+	if (cpu_is_pxa25x()) {
+		cmx2xx_leds[0].gpio = CMX255_GPIO_RED;
+		cmx2xx_leds[1].gpio = CMX255_GPIO_GREEN;
+	} else {
+		cmx2xx_leds[0].gpio = CMX270_GPIO_RED;
+		cmx2xx_leds[1].gpio = CMX270_GPIO_GREEN;
+	}
+	platform_device_register(&cmx2xx_led_device);
+}
+#else
+static inline void cmx2xx_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+/*
+  Display definitions
+  keep these for backwards compatibility, although symbolic names (as
+  e.g. in lpd270.c) looks better
+*/
+#define MTYPE_STN320x240	0
+#define MTYPE_TFT640x480	1
+#define MTYPE_CRT640x480	2
+#define MTYPE_CRT800x600	3
+#define MTYPE_TFT320x240	6
+#define MTYPE_STN640x480	7
+
+static struct pxafb_mode_info generic_stn_320x240_mode = {
+	.pixclock	= 76923,
+	.bpp		= 8,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 3,
+	.vsync_len	= 2,
+	.left_margin	= 3,
+	.upper_margin	= 0,
+	.right_margin	= 3,
+	.lower_margin	= 0,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_320x240 = {
+	.modes		= &generic_stn_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x03) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 60,
+	.vsync_len	= 2,
+	.left_margin	= 70,
+	.upper_margin	= 10,
+	.right_margin	= 70,
+	.lower_margin	= 5,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_640x480 = {
+	.modes		= &generic_tft_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_640x480_mode = {
+	.pixclock	= 38461,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 81,
+	.upper_margin	= 33,
+	.right_margin	= 16,
+	.lower_margin	= 10,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_640x480 = {
+	.modes		= &generic_crt_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x01) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_crt_800x600_mode = {
+	.pixclock	= 28846,
+	.bpp		= 8,
+	.xres		= 800,
+	.yres	  	= 600,
+	.hsync_len	= 63,
+	.vsync_len	= 2,
+	.left_margin	= 26,
+	.upper_margin	= 21,
+	.right_margin	= 26,
+	.lower_margin	= 11,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_crt_800x600 = {
+	.modes		= &generic_crt_800x600_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_tft_320x240_mode = {
+	.pixclock	= 134615,
+	.bpp		= 16,
+	.xres		= 320,
+	.yres		= 240,
+	.hsync_len	= 63,
+	.vsync_len	= 7,
+	.left_margin	= 75,
+	.upper_margin	= 0,
+	.right_margin	= 15,
+	.lower_margin	= 15,
+	.sync		= 0,
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_tft_320x240 = {
+	.modes		= &generic_tft_320x240_mode,
+	.num_modes	= 1,
+	.lccr0		= (LCCR0_PAS),
+	.lccr3		= (LCCR3_PixClkDiv(0x06) |
+			   LCCR3_Acb(0xff) |
+			   LCCR3_PCP),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mode_info generic_stn_640x480_mode = {
+	.pixclock	= 57692,
+	.bpp		= 8,
+	.xres		= 640,
+	.yres		= 480,
+	.hsync_len	= 4,
+	.vsync_len	= 2,
+	.left_margin	= 10,
+	.upper_margin	= 5,
+	.right_margin	= 10,
+	.lower_margin	= 5,
+	.sync		= (FB_SYNC_HOR_HIGH_ACT |
+			   FB_SYNC_VERT_HIGH_ACT),
+	.cmap_greyscale = 0,
+};
+
+static struct pxafb_mach_info generic_stn_640x480 = {
+	.modes		= &generic_stn_640x480_mode,
+	.num_modes	= 1,
+	.lccr0		= 0,
+	.lccr3		= (LCCR3_PixClkDiv(0x02) |
+			   LCCR3_Acb(0xff)),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+};
+
+static struct pxafb_mach_info *cmx2xx_display = &generic_crt_640x480;
+
+static int __init cmx2xx_set_display(char *str)
+{
+	int disp_type = simple_strtol(str, NULL, 0);
+	switch (disp_type) {
+	case MTYPE_STN320x240:
+		cmx2xx_display = &generic_stn_320x240;
+		break;
+	case MTYPE_TFT640x480:
+		cmx2xx_display = &generic_tft_640x480;
+		break;
+	case MTYPE_CRT640x480:
+		cmx2xx_display = &generic_crt_640x480;
+		break;
+	case MTYPE_CRT800x600:
+		cmx2xx_display = &generic_crt_800x600;
+		break;
+	case MTYPE_TFT320x240:
+		cmx2xx_display = &generic_tft_320x240;
+		break;
+	case MTYPE_STN640x480:
+		cmx2xx_display = &generic_stn_640x480;
+		break;
+	default: /* fallback to CRT 640x480 */
+		cmx2xx_display = &generic_crt_640x480;
+		break;
+	}
+	return 1;
+}
+
+/*
+   This should be done really early to get proper configuration for
+   frame buffer.
+   Indeed, pxafb parameters can be used istead, but CM-X2XX bootloader
+   has limitied line length for kernel command line, and also it will
+   break compatibitlty with proprietary releases already in field.
+*/
+__setup("monitor=", cmx2xx_set_display);
+
+static void __init cmx2xx_init_display(void)
+{
+	set_pxa_fb_info(cmx2xx_display);
+}
+#else
+static inline void cmx2xx_init_display(void) {}
+#endif
+
+#ifdef CONFIG_PM
+static unsigned long sleep_save_msc[10];
+
+static int cmx2xx_suspend(struct sys_device *dev, pm_message_t state)
+{
+	cmx2xx_pci_suspend();
+
+	/* save MSC registers */
+	sleep_save_msc[0] = MSC0;
+	sleep_save_msc[1] = MSC1;
+	sleep_save_msc[2] = MSC2;
+
+	/* setup power saving mode registers */
+	PCFR = 0x0;
+	PSLR = 0xff400000;
+	PMCR  = 0x00000005;
+	PWER  = 0x80000000;
+	PFER  = 0x00000000;
+	PRER  = 0x00000000;
+	PGSR0 = 0xC0018800;
+	PGSR1 = 0x004F0002;
+	PGSR2 = 0x6021C000;
+	PGSR3 = 0x00020000;
+
+	return 0;
+}
+
+static int cmx2xx_resume(struct sys_device *dev)
+{
+	cmx2xx_pci_resume();
+
+	/* restore MSC registers */
+	MSC0 = sleep_save_msc[0];
+	MSC1 = sleep_save_msc[1];
+	MSC2 = sleep_save_msc[2];
+
+	return 0;
+}
+
+static struct sysdev_class cmx2xx_pm_sysclass = {
+	.name = "pm",
+	.resume = cmx2xx_resume,
+	.suspend = cmx2xx_suspend,
+};
+
+static struct sys_device cmx2xx_pm_device = {
+	.cls = &cmx2xx_pm_sysclass,
+};
+
+static int __init cmx2xx_pm_init(void)
+{
+	int error;
+	error = sysdev_class_register(&cmx2xx_pm_sysclass);
+	if (error == 0)
+		error = sysdev_register(&cmx2xx_pm_device);
+	return error;
+}
+#else
+static int __init cmx2xx_pm_init(void) { return 0; }
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init cmx2xx_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cmx2xx_init_ac97(void) {}
+#endif
+
+static void __init cmx2xx_init(void)
+{
+	cmx2xx_pm_init();
+
+	if (cpu_is_pxa25x())
+		cmx255_init();
+	else
+		cmx270_init();
+
+	cmx2xx_init_dm9000();
+	cmx2xx_init_display();
+	cmx2xx_init_ac97();
+	cmx2xx_init_touchscreen();
+	cmx2xx_init_leds();
+}
+
+static void __init cmx2xx_init_irq(void)
+{
+	pxa27x_init_irq();
+
+	if (cpu_is_pxa25x()) {
+		pxa25x_init_irq();
+		cmx2xx_pci_init_irq(CMX255_GPIO_IT8152_IRQ);
+	} else {
+		pxa27x_init_irq();
+		cmx2xx_pci_init_irq(CMX270_GPIO_IT8152_IRQ);
+	}
+}
+
+#ifdef CONFIG_PCI
+/* Map PCI companion statically */
+static struct map_desc cmx2xx_io_desc[] __initdata = {
+	[0] = { /* PCI bridge */
+		.virtual	= CMX2XX_IT8152_VIRT,
+		.pfn		= __phys_to_pfn(PXA_CS4_PHYS),
+		.length		= SZ_64M,
+		.type		= MT_DEVICE
+	},
+};
+
+static void __init cmx2xx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(cmx2xx_io_desc, ARRAY_SIZE(cmx2xx_io_desc));
+
+	it8152_base_address = CMX2XX_IT8152_VIRT;
+}
+#else
+static void __init cmx2xx_map_io(void)
+{
+	pxa_map_io();
+}
+#endif
+
+MACHINE_START(ARMCORE, "Compulab CM-X2XX")
+	.boot_params	= 0xa0000100,
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= cmx2xx_map_io,
+	.init_irq	= cmx2xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= cmx2xx_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
new file mode 100644
index 0000000..deb46cd
--- /dev/null
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -0,0 +1,465 @@
+/*
+ * linux/arch/arm/mach-pxa/cm-x300.c
+ *
+ * Support for the CompuLab CM-X300 modules
+ *
+ * Copyright (C) 2008 CompuLab Ltd.
+ *
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
+#include <linux/leds.h>
+
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/mfp-pxa300.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+#include <mach/pxa3xx_nand.h>
+
+#include <asm/mach/map.h>
+
+#include "generic.h"
+
+#define CM_X300_ETH_PHYS	0x08000010
+
+#define GPIO82_MMC2_IRQ		(82)
+#define GPIO85_MMC2_WP		(85)
+
+#define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
+
+static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+	/* LCD */
+	GPIO54_LCD_LDD_0,
+	GPIO55_LCD_LDD_1,
+	GPIO56_LCD_LDD_2,
+	GPIO57_LCD_LDD_3,
+	GPIO58_LCD_LDD_4,
+	GPIO59_LCD_LDD_5,
+	GPIO60_LCD_LDD_6,
+	GPIO61_LCD_LDD_7,
+	GPIO62_LCD_LDD_8,
+	GPIO63_LCD_LDD_9,
+	GPIO64_LCD_LDD_10,
+	GPIO65_LCD_LDD_11,
+	GPIO66_LCD_LDD_12,
+	GPIO67_LCD_LDD_13,
+	GPIO68_LCD_LDD_14,
+	GPIO69_LCD_LDD_15,
+	GPIO72_LCD_FCLK,
+	GPIO73_LCD_LCLK,
+	GPIO74_LCD_PCLK,
+	GPIO75_LCD_BIAS,
+
+	/* BTUART */
+	GPIO111_UART2_RTS,
+	GPIO112_UART2_RXD | MFP_LPM_EDGE_FALL,
+	GPIO113_UART2_TXD,
+	GPIO114_UART2_CTS | MFP_LPM_EDGE_BOTH,
+
+	/* STUART */
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD | MFP_LPM_EDGE_FALL,
+
+	/* AC97 */
+	GPIO23_AC97_nACRESET,
+	GPIO24_AC97_SYSCLK,
+	GPIO29_AC97_BITCLK,
+	GPIO25_AC97_SDATA_IN_0,
+	GPIO27_AC97_SDATA_OUT,
+	GPIO28_AC97_SYNC,
+
+	/* Keypad */
+	GPIO115_KP_MKIN_0 | MFP_LPM_EDGE_BOTH,
+	GPIO116_KP_MKIN_1 | MFP_LPM_EDGE_BOTH,
+	GPIO117_KP_MKIN_2 | MFP_LPM_EDGE_BOTH,
+	GPIO118_KP_MKIN_3 | MFP_LPM_EDGE_BOTH,
+	GPIO119_KP_MKIN_4 | MFP_LPM_EDGE_BOTH,
+	GPIO120_KP_MKIN_5 | MFP_LPM_EDGE_BOTH,
+	GPIO2_2_KP_MKIN_6 | MFP_LPM_EDGE_BOTH,
+	GPIO3_2_KP_MKIN_7 | MFP_LPM_EDGE_BOTH,
+	GPIO121_KP_MKOUT_0,
+	GPIO122_KP_MKOUT_1,
+	GPIO123_KP_MKOUT_2,
+	GPIO124_KP_MKOUT_3,
+	GPIO125_KP_MKOUT_4,
+	GPIO4_2_KP_MKOUT_5,
+
+	/* MMC1 */
+	GPIO3_MMC1_DAT0,
+	GPIO4_MMC1_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO5_MMC1_DAT2,
+	GPIO6_MMC1_DAT3,
+	GPIO7_MMC1_CLK,
+	GPIO8_MMC1_CMD,	/* CMD0 for slot 0 */
+
+	/* MMC2 */
+	GPIO9_MMC2_DAT0,
+	GPIO10_MMC2_DAT1 | MFP_LPM_EDGE_BOTH,
+	GPIO11_MMC2_DAT2,
+	GPIO12_MMC2_DAT3,
+	GPIO13_MMC2_CLK,
+	GPIO14_MMC2_CMD,
+
+	/* FFUART */
+	GPIO30_UART1_RXD | MFP_LPM_EDGE_FALL,
+	GPIO31_UART1_TXD,
+	GPIO32_UART1_CTS,
+	GPIO37_UART1_RTS,
+	GPIO33_UART1_DCD,
+	GPIO34_UART1_DSR | MFP_LPM_EDGE_FALL,
+	GPIO35_UART1_RI,
+	GPIO36_UART1_DTR,
+
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
+	GPIO85_GPIO,			/* MMC WP */
+	GPIO99_GPIO,			/* Ethernet IRQ */
+};
+
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource dm9000_resources[] = {
+	[0] = {
+		.start	= CM_X300_ETH_PHYS,
+		.end	= CM_X300_ETH_PHYS + 0x3,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= CM_X300_ETH_PHYS + 0x4,
+		.end	= CM_X300_ETH_PHYS + 0x4 + 500,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = {
+		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO99)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct dm9000_plat_data cm_x300_dm9000_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device dm9000_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm9000_resources),
+	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &cm_x300_dm9000_platdata,
+	}
+
+};
+
+static void __init cm_x300_init_dm9000(void)
+{
+	platform_device_register(&dm9000_device);
+}
+#else
+static inline void cm_x300_init_dm9000(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct pxafb_mode_info cm_x300_lcd_modes[] = {
+	[0] = {
+		.pixclock	= 38000,
+		.bpp		= 16,
+		.xres		= 480,
+		.yres		= 640,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 0,
+		.right_margin	= 24,
+		.lower_margin	= 4,
+		.cmap_greyscale	= 0,
+	},
+	[1] = {
+		.pixclock	= 153800,
+		.bpp		= 16,
+		.xres		= 240,
+		.yres		= 320,
+		.hsync_len	= 8,
+		.vsync_len	= 2,
+		.left_margin	= 8,
+		.upper_margin	= 2,
+		.right_margin	= 88,
+		.lower_margin	= 2,
+		.cmap_greyscale	= 0,
+	},
+};
+
+static struct pxafb_mach_info cm_x300_lcd = {
+	.modes			= cm_x300_lcd_modes,
+	.num_modes		= 2,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static void __init cm_x300_init_lcd(void)
+{
+	set_pxa_fb_info(&cm_x300_lcd);
+}
+#else
+static inline void cm_x300_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition cm_x300_nand_partitions[] = {
+	[0] = {
+		.name        = "OBM",
+		.offset      = 0,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "U-Boot",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Environment",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K,
+	},
+	[3] = {
+		.name        = "reserved",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_256K + SZ_1M,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[4] = {
+		.name        = "kernel",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = SZ_4M,
+	},
+	[5] = {
+		.name        = "fs",
+		.offset      = MTDPART_OFS_APPEND,
+		.size        = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct pxa3xx_nand_platform_data cm_x300_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= cm_x300_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(cm_x300_nand_partitions),
+};
+
+static void __init cm_x300_init_nand(void)
+{
+	pxa3xx_set_nand_info(&cm_x300_nand_info);
+}
+#else
+static inline void cm_x300_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
+/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+   no detection/ro pins */
+static int cm_x300_mci_init(struct device *dev,
+			    irq_handler_t cm_x300_detect_int,
+			    void *data)
+{
+	return 0;
+}
+
+static void cm_x300_mci_exit(struct device *dev, void *data)
+{
+}
+
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= cm_x300_mci_init,
+	.exit		= cm_x300_mci_exit,
+};
+
+static int cm_x300_mci2_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO85_MMC2_WP);
+}
+
+static int cm_x300_mci2_init(struct device *dev,
+			     irq_handler_t cm_x300_detect_int,
+			     void *data)
+{
+	int err;
+
+	/*
+	 * setup GPIO for CM-X300 MMC controller
+	 */
+	err = gpio_request(GPIO82_MMC2_IRQ, "mmc card detect");
+	if (err)
+		goto err_request_cd;
+	gpio_direction_input(GPIO82_MMC2_IRQ);
+
+	err = gpio_request(GPIO85_MMC2_WP, "mmc write protect");
+	if (err)
+		goto err_request_wp;
+	gpio_direction_input(GPIO85_MMC2_WP);
+
+	err = request_irq(CM_X300_MMC2_IRQ, cm_x300_detect_int,
+			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  "MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: MMC/SD/SDIO: "
+				"can't request card detect IRQ\n", __func__);
+		goto err_request_irq;
+	}
+
+	return 0;
+
+err_request_irq:
+	gpio_free(GPIO85_MMC2_WP);
+err_request_wp:
+	gpio_free(GPIO82_MMC2_IRQ);
+err_request_cd:
+	return err;
+}
+
+static void cm_x300_mci2_exit(struct device *dev, void *data)
+{
+	free_irq(CM_X300_MMC2_IRQ, data);
+	gpio_free(GPIO82_MMC2_IRQ);
+	gpio_free(GPIO85_MMC2_WP);
+}
+
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.init 		= cm_x300_mci2_init,
+	.exit		= cm_x300_mci2_exit,
+	.get_ro		= cm_x300_mci2_ro,
+};
+
+static void __init cm_x300_init_mmc(void)
+{
+	pxa_set_mci_info(&cm_x300_mci_platform_data);
+	pxa3xx_set_mci2_info(&cm_x300_mci2_platform_data);
+}
+#else
+static inline void cm_x300_init_mmc(void) {}
+#endif
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+};
+
+static void __init cm_x300_init_ohci(void)
+{
+	pxa_set_ohci_info(&cm_x300_ohci_platform_data);
+}
+#else
+static inline void cm_x300_init_ohci(void) {}
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led cm_x300_leds[] = {
+	[0] = {
+		.name = "cm-x300:green",
+		.default_trigger = "heartbeat",
+		.gpio = 79,
+		.active_low = 1,
+	},
+};
+
+static struct gpio_led_platform_data cm_x300_gpio_led_pdata = {
+	.num_leds = ARRAY_SIZE(cm_x300_leds),
+	.leds = cm_x300_leds,
+};
+
+static struct platform_device cm_x300_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &cm_x300_gpio_led_pdata,
+	},
+};
+
+static void __init cm_x300_init_leds(void)
+{
+	platform_device_register(&cm_x300_led_device);
+}
+#else
+static inline void cm_x300_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+/* PCA9555 */
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_0 = {
+	.gpio_base = 128,
+};
+
+static struct pca953x_platform_data cm_x300_gpio_ext_pdata_1 = {
+	.gpio_base = 144,
+};
+
+static struct i2c_board_info cm_x300_gpio_ext_info[] = {
+	[0] = {
+		I2C_BOARD_INFO("pca9555", 0x24),
+		.platform_data = &cm_x300_gpio_ext_pdata_0,
+	},
+	[1] = {
+		I2C_BOARD_INFO("pca9555", 0x25),
+		.platform_data = &cm_x300_gpio_ext_pdata_1,
+	},
+};
+
+static void __init cm_x300_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, cm_x300_gpio_ext_info,
+				ARRAY_SIZE(cm_x300_gpio_ext_info));
+}
+#else
+static inline void cm_x300_init_i2c(void) {}
+#endif
+
+static void __init cm_x300_init(void)
+{
+	/* board-processor specific GPIO initialization */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+
+	cm_x300_init_dm9000();
+	cm_x300_init_lcd();
+	cm_x300_init_ohci();
+	cm_x300_init_mmc();
+	cm_x300_init_nand();
+	cm_x300_init_leds();
+	cm_x300_init_i2c();
+}
+
+MACHINE_START(CM_X300, "CM-X300 module")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0000100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa3xx_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= cm_x300_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/colibri.c b/arch/arm/mach-pxa/colibri.c
index 574839d..e847362 100644
--- a/arch/arm/mach-pxa/colibri.c
+++ b/arch/arm/mach-pxa/colibri.c
@@ -21,20 +21,25 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/colibri.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/colibri.h>
 
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long colibri_pin_config[] __initdata = {
+	GPIO78_nCS_2,	/* Ethernet CS */
+	GPIO114_GPIO,	/* Ethernet IRQ */
+};
+
 /*
  * Flash
  */
@@ -116,9 +121,7 @@ static struct platform_device *colibri_devices[] __initdata = {
 
 static void __init colibri_init(void)
 {
-	/* DM9000 LAN */
-	pxa_gpio_mode(GPIO78_nCS_2_MD);
-	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pin_config));
 
 	platform_add_devices(colibri_devices, ARRAY_SIZE(colibri_devices));
 }
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b757dd7..65558d6 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -20,28 +20,35 @@
 #include <linux/interrupt.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
+#include <linux/gpio.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 #include <video/w100fb.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/corgi.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -50,6 +57,61 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long corgi_pin_config[] __initdata = {
+	/* Static Memory I/O */
+	GPIO78_nCS_2,	/* w100fb */
+	GPIO80_nCS_4,	/* scoop */
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* CORGI_GPIO_ADS7846_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* CORGI_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* CORGI_GPIO_nSD_WP */
+	GPIO33_GPIO,	/* CORGI_GPIO_SD_PWR */
+	GPIO22_GPIO,	/* CORGI_GPIO_IR_ON */
+	GPIO44_GPIO,	/* CORGI_GPIO_HSYNC */
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
 
 /*
  * Corgi SCOOP Device
@@ -65,6 +127,7 @@ static struct resource corgi_scoop_resources[] = {
 static struct scoop_config corgi_scoop_setup = {
 	.io_dir 	= CORGI_SCOOP_IO_DIR,
 	.io_out		= CORGI_SCOOP_IO_OUT,
+	.gpio_base	= CORGI_SCOOP_GPIO_BASE,
 };
 
 struct platform_device corgiscoop_device = {
@@ -77,27 +140,6 @@ struct platform_device corgiscoop_device = {
 	.resource	= corgi_scoop_resources,
 };
 
-static void corgi_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 {
 	.dev        = &corgiscoop_device.dev,
@@ -110,58 +152,10 @@ static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config corgi_pcmcia_config = {
 	.devs         = &corgi_pcmcia_scoop[0],
 	.num_devs     = 1,
-	.pcmcia_init  = corgi_pcmcia_init,
 };
 
 EXPORT_SYMBOL(corgiscoop_device);
 
-
-/*
- * Corgi SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
- */
-struct platform_device corgissp_device = {
-	.name		= "corgi-ssp",
-	.dev		= {
- 		.parent = &corgiscoop_device.dev,
-	},
-	.id		= -1,
-};
-
-struct corgissp_machinfo corgi_ssp_machinfo = {
-	.port		= 1,
-	.cs_lcdcon	= CORGI_GPIO_LCDCON_CS,
-	.cs_ads7846	= CORGI_GPIO_ADS7846_CS,
-	.cs_max1111	= CORGI_GPIO_MAX1111_CS,
-	.clk_lcdcon	= 76,
-	.clk_ads7846	= 2,
-	.clk_max1111	= 8,
-};
-
-
-/*
- * LCD/Framebuffer
- */
-static void w100_lcdtg_suspend(struct w100fb_par *par)
-{
-	corgi_lcdtg_suspend();
-}
-
-static void w100_lcdtg_init(struct w100fb_par *par)
-{
-	corgi_lcdtg_hw_init(par->xres);
-}
-
-
-static struct w100_tg_info corgi_lcdtg_info = {
-	.change  = w100_lcdtg_init,
-	.suspend = w100_lcdtg_suspend,
-	.resume  = w100_lcdtg_init,
-};
-
 static struct w100_mem_info corgi_fb_mem = {
 	.ext_cntl          = 0x00040003,
 	.sdram_mode_reg    = 0x00650021,
@@ -240,7 +234,6 @@ static struct w100_mode corgi_fb_modes[] = {
 };
 
 static struct w100fb_mach_info corgi_fb_info = {
-	.tg         = &corgi_lcdtg_info,
 	.init_mode  = INIT_MODE_ROTATED,
 	.mem        = &corgi_fb_mem,
 	.regs       = &corgi_fb_regs,
@@ -266,60 +259,10 @@ static struct platform_device corgifb_device = {
 	.resource	= corgi_fb_resources,
 	.dev            = {
 		.platform_data = &corgi_fb_info,
-		.parent = &corgissp_device.dev,
 	},
 
 };
 
-
-/*
- * Corgi Backlight Device
- */
-static void corgi_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static void corgi_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-	else
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_BACKLIGHT_CONT);
-}
-
-static struct generic_bl_info corgi_bl_machinfo = {
-	.name = "corgi-bl",
-	.max_intensity = 0x2f,
-	.default_intensity = 0x1f,
-	.limit_mask = 0x0b,
-	.set_bl_intensity = corgi_bl_set_intensity,
-	.kick_battery = corgi_bl_kick_battery,
-};
-
-static struct platform_device corgibl_device = {
-	.name		= "generic-bl",
-	.dev		= {
- 		.parent = &corgifb_device.dev,
-		.platform_data	= &corgi_bl_machinfo,
-	},
-	.id		= -1,
-};
-
-
 /*
  * Corgi Keyboard Device
  */
@@ -328,75 +271,35 @@ static struct platform_device corgikbd_device = {
 	.id		= -1,
 };
 
-
 /*
  * Corgi LEDs
  */
-static struct platform_device corgiled_device = {
-	.name		= "corgi-led",
-	.id		= -1,
-};
-
-
-/*
- * Corgi Touch Screen Device
- */
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
-
-static void inline sharpsl_wait_sync(int gpio)
-{
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
-}
-
-static unsigned long corgi_get_hsync_invperiod(void)
-{
-	if (!get_hsync_invperiod)
-		get_hsync_invperiod = symbol_get(w100fb_get_hsynclen);
-	if (!get_hsync_invperiod)
-		return 0;
-
-	return get_hsync_invperiod(&corgifb_device.dev);
-}
-
-static void corgi_put_hsync(void)
-{
-	if (get_hsync_invperiod)
-		symbol_put(w100fb_get_hsynclen);
-	get_hsync_invperiod = NULL;
-}
-
-static void corgi_wait_hsync(void)
-{
-	sharpsl_wait_sync(CORGI_GPIO_HSYNC);
-}
-
-static struct resource corgits_resources[] = {
-	[0] = {
-		.start		= CORGI_IRQ_GPIO_TP_INT,
-		.end		= CORGI_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
+static struct gpio_led corgi_gpio_leds[] = {
+	{
+		.name			= "corgi:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= CORGI_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "corgi:green:mail",
+		.default_trigger	= "nand-disk",
+		.gpio			= CORGI_GPIO_LED_GREEN,
 	},
 };
 
-static struct corgits_machinfo  corgi_ts_machinfo = {
-	.get_hsync_invperiod = corgi_get_hsync_invperiod,
-	.put_hsync           = corgi_put_hsync,
-	.wait_hsync          = corgi_wait_hsync,
+static struct gpio_led_platform_data corgi_gpio_leds_info = {
+	.leds		= corgi_gpio_leds,
+	.num_leds	= ARRAY_SIZE(corgi_gpio_leds),
 };
 
-static struct platform_device corgits_device = {
-	.name		= "corgi-ts",
+static struct platform_device corgiled_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
 	.dev		= {
- 		.parent = &corgissp_device.dev,
-		.platform_data	= &corgi_ts_machinfo,
+		.platform_data = &corgi_gpio_leds_info,
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(corgits_resources),
-	.resource	= corgits_resources,
 };
 
-
 /*
  * MMC/SD Device
  *
@@ -409,20 +312,42 @@ static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, vo
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
+	err = gpio_request(CORGI_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
 
-	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+	err = gpio_request(CORGI_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
 
-	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	err = gpio_request(CORGI_GPIO_SD_PWR, "SD_PWR");
 	if (err)
-		printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+		goto err_free_2;
 
+	gpio_direction_input(CORGI_GPIO_nSD_DETECT);
+	gpio_direction_input(CORGI_GPIO_nSD_WP);
+	gpio_direction_output(CORGI_GPIO_SD_PWR, 0);
+
+	corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
+
+	err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
+				IRQF_DISABLED | IRQF_TRIGGER_RISING |
+				IRQF_TRIGGER_FALLING,
+				"MMC card detect", data);
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_3;
+	}
+	return 0;
+
+err_free_3:
+	gpio_free(CORGI_GPIO_SD_PWR);
+err_free_2:
+	gpio_free(CORGI_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(CORGI_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -430,20 +355,20 @@ static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask)
-		GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
-	else
-		GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
+	gpio_set_value(CORGI_GPIO_SD_PWR, ((1 << vdd) & p_d->ocr_mask));
 }
 
 static int corgi_mci_get_ro(struct device *dev)
 {
-	return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
+	return gpio_get_value(CORGI_GPIO_nSD_WP);
 }
 
 static void corgi_mci_exit(struct device *dev, void *data)
 {
 	free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(CORGI_GPIO_SD_PWR);
+	gpio_free(CORGI_GPIO_nSD_WP);
+	gpio_free(CORGI_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data corgi_mci_platform_data = {
@@ -460,15 +385,32 @@ static struct pxamci_platform_data corgi_mci_platform_data = {
  */
 static void corgi_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
-	else
-		GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
+	gpio_set_value(CORGI_GPIO_IR_ON, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static int corgi_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_IR_ON, "IR_ON");
+	if (err)
+		return err;
+
+	gpio_direction_output(CORGI_GPIO_IR_ON, 1);
+	return 0;
+}
+
+static void corgi_irda_shutdown(struct device *dev)
+{
+	gpio_free(CORGI_GPIO_IR_ON);
 }
 
 static struct pxaficp_platform_data corgi_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = corgi_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= corgi_irda_transceiver_mode,
+	.startup		= corgi_irda_startup,
+	.shutdown		= corgi_irda_shutdown,
 };
 
 
@@ -480,14 +422,129 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
 
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MASTER)
+static struct pxa2xx_spi_master corgi_spi_info = {
+	.num_chipselect	= 3,
+};
+
+static struct ads7846_platform_data corgi_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= CORGI_GPIO_TP_INT,
+};
+
+static void corgi_ads7846_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_ads7846_chip = {
+	.cs_control	= corgi_ads7846_cs,
+};
+
+static void corgi_bl_kick_battery(void)
+{
+	void (*kick_batt)(void);
+
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
+	}
+}
+
+static struct corgi_lcd_platform_data corgi_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= CORGI_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= -1,
+	.kick_battery		= corgi_bl_kick_battery,
+};
+
+static void corgi_lcdcon_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_lcdcon_chip = {
+	.cs_control	= corgi_lcdcon_cs,
+};
+
+static void corgi_max1111_cs(u32 command)
+{
+	gpio_set_value(CORGI_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip corgi_max1111_chip = {
+	.cs_control	= corgi_max1111_cs,
+};
+
+static struct spi_board_info corgi_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.platform_data	= &corgi_ads7846_info,
+		.controller_data= &corgi_ads7846_chip,
+		.irq		= gpio_to_irq(CORGI_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 1,
+		.chip_select	= 1,
+		.platform_data	= &corgi_lcdcon_info,
+		.controller_data= &corgi_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 1,
+		.chip_select	= 2,
+		.controller_data= &corgi_max1111_chip,
+	},
+};
+
+static void __init corgi_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(CORGI_GPIO_ADS7846_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	err = gpio_request(CORGI_GPIO_LCDCON_CS, "LCDCON_CS");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(CORGI_GPIO_MAX1111_CS, "MAX1111_CS");
+	if (err)
+		goto err_free_2;
+
+	gpio_direction_output(CORGI_GPIO_ADS7846_CS, 1);
+	gpio_direction_output(CORGI_GPIO_LCDCON_CS, 1);
+	gpio_direction_output(CORGI_GPIO_MAX1111_CS, 1);
+
+	pxa2xx_set_spi_info(1, &corgi_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(corgi_spi_devices));
+	return;
+
+err_free_2:
+	gpio_free(CORGI_GPIO_LCDCON_CS);
+err_free_1:
+	gpio_free(CORGI_GPIO_ADS7846_CS);
+}
+#else
+static inline void corgi_init_spi(void) {}
+#endif
 
 static struct platform_device *devices[] __initdata = {
 	&corgiscoop_device,
-	&corgissp_device,
 	&corgifb_device,
 	&corgikbd_device,
-	&corgibl_device,
-	&corgits_device,
 	&corgiled_device,
 };
 
@@ -495,7 +552,8 @@ static void corgi_poweroff(void)
 {
 	if (!machine_is_corgi())
 		/* Green LED off tells the bootloader to halt */
-		reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 0);
+
 	arm_machine_restart('h');
 }
 
@@ -503,7 +561,8 @@ static void corgi_restart(char mode)
 {
 	if (!machine_is_corgi())
 		/* Green LED on tells the bootloader to reboot */
-		set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
+		gpio_set_value(CORGI_GPIO_LED_GREEN, 1);
+
 	arm_machine_restart('h');
 }
 
@@ -512,24 +571,17 @@ static void __init corgi_init(void)
 	pm_power_off = corgi_poweroff;
 	arm_pm_restart = corgi_restart;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
 
-	corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
-	pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
-	pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
+	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&corgi_mci_platform_data);
 	pxa_set_ficp_info(&corgi_ficp_platform_data);
+	pxa_set_i2c_info(NULL);
 
 	platform_scoop_config = &corgi_pcmcia_config;
 
diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c
deleted file mode 100644
index 9328df3..0000000
--- a/arch/arm/mach-pxa/corgi_lcd.c
+++ /dev/null
@@ -1,290 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/corgi_lcd.c
- *
- * Corgi/Spitz LCD Specific Code
- *
- * Copyright (C) 2005 Richard Purdie
- *
- * Connectivity:
- *   Corgi - LCD to ATI Imageon w100 (Wallaby)
- *   Spitz - LCD to PXA Framebuffer
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/corgi.h>
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/hardware/scoop.h>
-#include <asm/mach/sharpsl_param.h>
-#include "generic.h"
-
-/* Register Addresses */
-#define RESCTL_ADRS     0x00
-#define PHACTRL_ADRS    0x01
-#define DUTYCTRL_ADRS   0x02
-#define POWERREG0_ADRS  0x03
-#define POWERREG1_ADRS  0x04
-#define GPOR3_ADRS      0x05
-#define PICTRL_ADRS     0x06
-#define POLCTRL_ADRS    0x07
-
-/* Register Bit Definitions */
-#define RESCTL_QVGA     0x01
-#define RESCTL_VGA      0x00
-
-#define POWER1_VW_ON    0x01  /* VW Supply FET ON */
-#define POWER1_GVSS_ON  0x02  /* GVSS(-8V) Power Supply ON */
-#define POWER1_VDD_ON   0x04  /* VDD(8V),SVSS(-4V) Power Supply ON */
-
-#define POWER1_VW_OFF   0x00  /* VW Supply FET OFF */
-#define POWER1_GVSS_OFF 0x00  /* GVSS(-8V) Power Supply OFF */
-#define POWER1_VDD_OFF  0x00  /* VDD(8V),SVSS(-4V) Power Supply OFF */
-
-#define POWER0_COM_DCLK 0x01  /* COM Voltage DC Bias DAC Serial Data Clock */
-#define POWER0_COM_DOUT 0x02  /* COM Voltage DC Bias DAC Serial Data Out */
-#define POWER0_DAC_ON   0x04  /* DAC Power Supply ON */
-#define POWER0_COM_ON   0x08  /* COM Power Supply ON */
-#define POWER0_VCC5_ON  0x10  /* VCC5 Power Supply ON */
-
-#define POWER0_DAC_OFF  0x00  /* DAC Power Supply OFF */
-#define POWER0_COM_OFF  0x00  /* COM Power Supply OFF */
-#define POWER0_VCC5_OFF 0x00  /* VCC5 Power Supply OFF */
-
-#define PICTRL_INIT_STATE      0x01
-#define PICTRL_INIOFF          0x02
-#define PICTRL_POWER_DOWN      0x04
-#define PICTRL_COM_SIGNAL_OFF  0x08
-#define PICTRL_DAC_SIGNAL_OFF  0x10
-
-#define POLCTRL_SYNC_POL_FALL  0x01
-#define POLCTRL_EN_POL_FALL    0x02
-#define POLCTRL_DATA_POL_FALL  0x04
-#define POLCTRL_SYNC_ACT_H     0x08
-#define POLCTRL_EN_ACT_L       0x10
-
-#define POLCTRL_SYNC_POL_RISE  0x00
-#define POLCTRL_EN_POL_RISE    0x00
-#define POLCTRL_DATA_POL_RISE  0x00
-#define POLCTRL_SYNC_ACT_L     0x00
-#define POLCTRL_EN_ACT_H       0x00
-
-#define PHACTRL_PHASE_MANUAL   0x01
-#define DEFAULT_PHAD_QVGA     (9)
-#define DEFAULT_COMADJ        (125)
-
-/*
- * This is only a psuedo I2C interface. We can't use the standard kernel
- * routines as the interface is write only. We just assume the data is acked...
- */
-static void lcdtg_ssp_i2c_send(u8 data)
-{
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, data);
-	udelay(10);
-}
-
-static void lcdtg_i2c_send_bit(u8 data)
-{
-	lcdtg_ssp_i2c_send(data);
-	lcdtg_ssp_i2c_send(data | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(data);
-}
-
-static void lcdtg_i2c_send_start(u8 base)
-{
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base);
-}
-
-static void lcdtg_i2c_send_stop(u8 base)
-{
-	lcdtg_ssp_i2c_send(base);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK);
-	lcdtg_ssp_i2c_send(base | POWER0_COM_DCLK | POWER0_COM_DOUT);
-}
-
-static void lcdtg_i2c_send_byte(u8 base, u8 data)
-{
-	int i;
-	for (i = 0; i < 8; i++) {
-		if (data & 0x80)
-			lcdtg_i2c_send_bit(base | POWER0_COM_DOUT);
-		else
-			lcdtg_i2c_send_bit(base);
-		data <<= 1;
-	}
-}
-
-static void lcdtg_i2c_wait_ack(u8 base)
-{
-	lcdtg_i2c_send_bit(base);
-}
-
-static void lcdtg_set_common_voltage(u8 base_data, u8 data)
-{
-	/* Set Common Voltage to M62332FP via I2C */
-	lcdtg_i2c_send_start(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x9c);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, 0x00);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_byte(base_data, data);
-	lcdtg_i2c_wait_ack(base_data);
-	lcdtg_i2c_send_stop(base_data);
-}
-
-/* Set Phase Adjust */
-static void lcdtg_set_phadadj(int mode)
-{
-	int adj;
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Setting for VGA */
-			adj = sharpsl_param.phadadj;
-			if (adj < 0) {
-				adj = PHACTRL_PHASE_MANUAL;
-			} else {
-				adj = ((adj & 0x0f) << 1) | PHACTRL_PHASE_MANUAL;
-			}
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Setting for QVGA */
-			adj = (DEFAULT_PHAD_QVGA << 1) | PHACTRL_PHASE_MANUAL;
-			break;
-	}
-
-	corgi_ssp_lcdtg_send(PHACTRL_ADRS, adj);
-}
-
-static int lcd_inited;
-
-void corgi_lcdtg_hw_init(int mode)
-{
-	if (!lcd_inited) {
-		int comadj;
-
-		/* Initialize Internal Logic & Port */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_POWER_DOWN | PICTRL_INIOFF | PICTRL_INIT_STATE
-	  			| PICTRL_COM_SIGNAL_OFF | PICTRL_DAC_SIGNAL_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_OFF
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-		/* VDD(+8V), SVSS(-4V) ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-		mdelay(3);
-
-		/* DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-		/* INIB = H, INI = L  */
-		/* PICTL[0] = H , PICTL[1] = PICTL[2] = PICTL[4] = L */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE | PICTRL_COM_SIGNAL_OFF);
-
-		/* Set Common Voltage */
-		comadj = sharpsl_param.comadj;
-		if (comadj < 0)
-			comadj = DEFAULT_COMADJ;
-		lcdtg_set_common_voltage((POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF), comadj);
-
-		/* VCC5 ON, DAC ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON |
-				POWER0_COM_OFF | POWER0_VCC5_ON);
-
-		/* GVSS(-8V) ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-		mdelay(2);
-
-		/* COM SIGNAL ON (PICTL[3] = L) */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIT_STATE);
-
-		/* COM ON, DAC ON, VCC5_ON */
-		corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_COM_DCLK | POWER0_COM_DOUT | POWER0_DAC_ON
-				| POWER0_COM_ON | POWER0_VCC5_ON);
-
-		/* VW ON, GVSS ON, VDD ON */
-		corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_ON | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-		/* Signals output enable */
-		corgi_ssp_lcdtg_send(PICTRL_ADRS, 0);
-
-		/* Set Phase Adjust */
-		lcdtg_set_phadadj(mode);
-
-		/* Initialize for Input Signals from ATI */
-		corgi_ssp_lcdtg_send(POLCTRL_ADRS, POLCTRL_SYNC_POL_RISE | POLCTRL_EN_POL_RISE
-				| POLCTRL_DATA_POL_RISE | POLCTRL_SYNC_ACT_L | POLCTRL_EN_ACT_H);
-		udelay(1000);
-
-		lcd_inited=1;
-	} else {
-		lcdtg_set_phadadj(mode);
-	}
-
-	switch(mode) {
-		case 480:
-		case 640:
-			/* Set Lcd Resolution (VGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_VGA);
-			break;
-		case 240:
-		case 320:
-		default:
-			/* Set Lcd Resolution (QVGA) */
-			corgi_ssp_lcdtg_send(RESCTL_ADRS, RESCTL_QVGA);
-			break;
-	}
-}
-
-void corgi_lcdtg_suspend(void)
-{
-	/* 60Hz x 2 frame = 16.7msec x 2 = 33.4 msec */
-	mdelay(34);
-
-	/* (1)VW OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_ON | POWER1_VDD_ON);
-
-	/* (2)COM OFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_COM_SIGNAL_OFF);
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON);
-
-	/* (3)Set Common Voltage Bias 0V */
-	lcdtg_set_common_voltage(POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_ON, 0);
-
-	/* (4)GVSS OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_ON);
-
-	/* (5)VCC5 OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_ON | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (6)Set PDWN, INIOFF, DACOFF */
-	corgi_ssp_lcdtg_send(PICTRL_ADRS, PICTRL_INIOFF | PICTRL_DAC_SIGNAL_OFF |
-			PICTRL_POWER_DOWN | PICTRL_COM_SIGNAL_OFF);
-
-	/* (7)DAC OFF */
-	corgi_ssp_lcdtg_send(POWERREG0_ADRS, POWER0_DAC_OFF | POWER0_COM_OFF | POWER0_VCC5_OFF);
-
-	/* (8)VDD OFF */
-	corgi_ssp_lcdtg_send(POWERREG1_ADRS, POWER1_VW_OFF | POWER1_GVSS_OFF | POWER1_VDD_OFF);
-
-	lcd_inited = 0;
-}
-
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index 0a85f70..eb7d6c9 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -20,13 +20,13 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/hardware/scoop.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/corgi.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/corgi.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
@@ -204,7 +204,9 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.read_devdata    = corgipm_read_devdata,
 	.charger_wakeup  = corgi_charger_wakeup,
 	.should_wakeup   = corgi_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
 	.backlight_limit = corgibl_limit_intensity,
+#endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
 	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -226,6 +228,10 @@ static int __devinit corgipm_init(void)
 {
 	int ret;
 
+	if (!machine_is_corgi() && !machine_is_shepherd()
+			&& !machine_is_husky())
+		return -ENODEV;
+
 	corgipm_device = platform_device_alloc("sharpsl-pm", -1);
 	if (!corgipm_device)
 		return -ENOMEM;
diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c
deleted file mode 100644
index eccc45d..0000000
--- a/arch/arm/mach-pxa/corgi_ssp.c
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *  SSP control code for Sharp Corgi devices
- *
- *  Copyright (c) 2004-2005 Richard Purdie
- *
- *  This program is free software; you can redistribute it and/or modify
- *  it under the terms of the GNU General Public License version 2 as
- *  published by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <asm/hardware.h>
-#include <asm/mach-types.h>
-
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/regs-ssp.h>
-#include "sharpsl.h"
-
-static DEFINE_SPINLOCK(corgi_ssp_lock);
-static struct ssp_dev corgi_ssp_dev;
-static struct ssp_state corgi_ssp_state;
-static struct corgissp_machinfo *ssp_machinfo;
-
-/*
- * There are three devices connected to the SSP interface:
- *   1. A touchscreen controller (TI ADS7846 compatible)
- *   2. An LCD controller (with some Backlight functionality)
- *   3. A battery monitoring IC (Maxim MAX1111)
- *
- * Each device uses a different speed/mode of communication.
- *
- * The touchscreen is very sensitive and the most frequently used
- * so the port is left configured for this.
- *
- * Devices are selected using Chip Selects on GPIOs.
- */
-
-/*
- *  ADS7846 Routines
- */
-unsigned long corgi_ssp_ads7846_putget(ulong data)
-{
-	unsigned long flag;
-	u32 ret = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-
-	ssp_write_word(&corgi_ssp_dev,data);
- 	ssp_read_word(&corgi_ssp_dev, &ret);
-
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return ret;
-}
-
-/*
- * NOTE: These functions should always be called in interrupt context
- * and use the _lock and _unlock functions. They are very time sensitive.
- */
-void corgi_ssp_ads7846_lock(void)
-{
-	spin_lock(&corgi_ssp_lock);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPCR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-}
-
-void corgi_ssp_ads7846_unlock(void)
-{
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846);
-	spin_unlock(&corgi_ssp_lock);
-}
-
-void corgi_ssp_ads7846_put(ulong data)
-{
-	ssp_write_word(&corgi_ssp_dev,data);
-}
-
-unsigned long corgi_ssp_ads7846_get(void)
-{
-	u32 ret = 0;
-	ssp_read_word(&corgi_ssp_dev, &ret);
-	return ret;
-}
-
-EXPORT_SYMBOL(corgi_ssp_ads7846_putget);
-EXPORT_SYMBOL(corgi_ssp_ads7846_lock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_unlock);
-EXPORT_SYMBOL(corgi_ssp_ads7846_put);
-EXPORT_SYMBOL(corgi_ssp_ads7846_get);
-
-
-/*
- *  LCD/Backlight Routines
- */
-unsigned long corgi_ssp_dac_put(ulong data)
-{
-	unsigned long flag, sscr1 = SSCR1_SPH;
-	u32 tmp;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-
-	if (machine_is_spitz() || machine_is_akita() || machine_is_borzoi())
-		sscr1 = 0;
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), sscr1, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_lcdcon));
-	ssp_enable(&corgi_ssp_dev);
-
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPCR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-	ssp_write_word(&corgi_ssp_dev,data);
-	/* Read null data back from device to prevent SSP overflow */
-	ssp_read_word(&corgi_ssp_dev, &tmp);
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	return 0;
-}
-
-void corgi_ssp_lcdtg_send(u8 adrs, u8 data)
-{
-	corgi_ssp_dac_put(((adrs & 0x07) << 5) | (data & 0x1f));
-}
-
-void corgi_ssp_blduty_set(int duty)
-{
-	corgi_ssp_lcdtg_send(0x02,duty);
-}
-
-EXPORT_SYMBOL(corgi_ssp_lcdtg_send);
-EXPORT_SYMBOL(corgi_ssp_blduty_set);
-
-/*
- *  Max1111 Routines
- */
-int corgi_ssp_max1111_get(ulong data)
-{
-	unsigned long flag;
-	long voltage = 0, voltage1 = 0, voltage2 = 0;
-
-	spin_lock_irqsave(&corgi_ssp_lock, flag);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPCR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_Motorola | (SSCR0_DSS & 0x07 )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_max1111));
-	ssp_enable(&corgi_ssp_dev);
-
-	udelay(1);
-
-	/* TB1/RB1 */
-	ssp_write_word(&corgi_ssp_dev,data);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1); /* null read */
-
-	/* TB12/RB2 */
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage1);
-
-	/* TB13/RB3*/
-	ssp_write_word(&corgi_ssp_dev,0);
-	ssp_read_word(&corgi_ssp_dev, (u32*)&voltage2);
-
-	ssp_disable(&corgi_ssp_dev);
-	ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-	ssp_enable(&corgi_ssp_dev);
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111);
-	spin_unlock_irqrestore(&corgi_ssp_lock, flag);
-
-	if (voltage1 & 0xc0 || voltage2 & 0x3f)
-		voltage = -1;
-	else
-		voltage = ((voltage1 << 2) & 0xfc) | ((voltage2 >> 6) & 0x03);
-
-	return voltage;
-}
-
-EXPORT_SYMBOL(corgi_ssp_max1111_get);
-
-/*
- *  Support Routines
- */
-
-void __init corgi_ssp_set_machinfo(struct corgissp_machinfo *machinfo)
-{
-	ssp_machinfo = machinfo;
-}
-
-static int __init corgi_ssp_probe(struct platform_device *dev)
-{
-	int ret;
-
-	/* Chip Select - Disable All */
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		pxa_gpio_mode(ssp_machinfo->cs_lcdcon  | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_max1111 >= 0)
-	        pxa_gpio_mode(ssp_machinfo->cs_max1111 | GPIO_OUT | GPIO_DFLT_HIGH);
-	if (ssp_machinfo->cs_ads7846 >= 0)
-        	pxa_gpio_mode(ssp_machinfo->cs_ads7846 | GPIO_OUT | GPIO_DFLT_HIGH);
-
-	ret = ssp_init(&corgi_ssp_dev, ssp_machinfo->port, 0);
-
-	if (ret)
-		printk(KERN_ERR "Unable to register SSP handler!\n");
-	else {
-		ssp_disable(&corgi_ssp_dev);
-		ssp_config(&corgi_ssp_dev, (SSCR0_National | (SSCR0_DSS & 0x0b )), 0, 0, SSCR0_SerClkDiv(ssp_machinfo->clk_ads7846));
-		ssp_enable(&corgi_ssp_dev);
-	}
-
-	return ret;
-}
-
-static int corgi_ssp_remove(struct platform_device *dev)
-{
-	ssp_exit(&corgi_ssp_dev);
-	return 0;
-}
-
-static int corgi_ssp_suspend(struct platform_device *dev, pm_message_t state)
-{
-	ssp_flush(&corgi_ssp_dev);
-	ssp_save_state(&corgi_ssp_dev,&corgi_ssp_state);
-
-	return 0;
-}
-
-static int corgi_ssp_resume(struct platform_device *dev)
-{
-	if (ssp_machinfo->cs_lcdcon >= 0)
-		GPSR(ssp_machinfo->cs_lcdcon) = GPIO_bit(ssp_machinfo->cs_lcdcon);  /* High - Disable LCD Control/Timing Gen */
-	if (ssp_machinfo->cs_max1111 >= 0)
-		GPSR(ssp_machinfo->cs_max1111) = GPIO_bit(ssp_machinfo->cs_max1111); /* High - Disable MAX1111*/
-	if (ssp_machinfo->cs_ads7846 >= 0)
-		GPSR(ssp_machinfo->cs_ads7846) = GPIO_bit(ssp_machinfo->cs_ads7846); /* High - Disable ADS7846*/
-	ssp_restore_state(&corgi_ssp_dev,&corgi_ssp_state);
-	ssp_enable(&corgi_ssp_dev);
-
-	return 0;
-}
-
-static struct platform_driver corgissp_driver = {
-	.probe		= corgi_ssp_probe,
-	.remove		= corgi_ssp_remove,
-	.suspend	= corgi_ssp_suspend,
-	.resume		= corgi_ssp_resume,
-	.driver		= {
-		.name	= "corgi-ssp",
-	},
-};
-
-int __init corgi_ssp_init(void)
-{
-	return platform_driver_register(&corgissp_driver);
-}
-
-arch_initcall(corgi_ssp_init);
diff --git a/arch/arm/mach-pxa/cpu-pxa.c b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
index fb9ba1a..d82528e 100644
--- a/arch/arm/mach-pxa/cpu-pxa.c
+++ b/arch/arm/mach-pxa/cpufreq-pxa2xx.c
@@ -1,5 +1,5 @@
 /*
- *  linux/arch/arm/mach-pxa/cpu-pxa.c
+ *  linux/arch/arm/mach-pxa/cpufreq-pxa2xx.c
  *
  *  Copyright (C) 2002,2003 Intrinsyc Software
  *
@@ -37,9 +37,9 @@
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #ifdef DEBUG
 static unsigned int freq_debug;
diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
new file mode 100644
index 0000000..1ea0c9c
--- /dev/null
+++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c
@@ -0,0 +1,258 @@
+/*
+ * linux/arch/arm/mach-pxa/cpufreq-pxa3xx.c
+ *
+ * Copyright (C) 2008 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa3xx-regs.h>
+
+#include "generic.h"
+
+#define HSS_104M	(0)
+#define HSS_156M	(1)
+#define HSS_208M	(2)
+#define HSS_312M	(3)
+
+#define SMCFS_78M	(0)
+#define SMCFS_104M	(2)
+#define SMCFS_208M	(5)
+
+#define SFLFS_104M	(0)
+#define SFLFS_156M	(1)
+#define SFLFS_208M	(2)
+#define SFLFS_312M	(3)
+
+#define XSPCLK_156M	(0)
+#define XSPCLK_NONE	(3)
+
+#define DMCFS_26M	(0)
+#define DMCFS_260M	(3)
+
+struct pxa3xx_freq_info {
+	unsigned int cpufreq_mhz;
+	unsigned int core_xl : 5;
+	unsigned int core_xn : 3;
+	unsigned int hss : 2;
+	unsigned int dmcfs : 2;
+	unsigned int smcfs : 3;
+	unsigned int sflfs : 2;
+	unsigned int df_clkdiv : 3;
+
+	int	vcc_core;	/* in mV */
+	int	vcc_sram;	/* in mV */
+};
+
+#define OP(cpufreq, _xl, _xn, _hss, _dmc, _smc, _sfl, _dfi, vcore, vsram) \
+{									\
+	.cpufreq_mhz	= cpufreq,					\
+	.core_xl	= _xl,						\
+	.core_xn	= _xn,						\
+	.hss		= HSS_##_hss##M,				\
+	.dmcfs		= DMCFS_##_dmc##M,				\
+	.smcfs		= SMCFS_##_smc##M,				\
+	.sflfs		= SFLFS_##_sfl##M,				\
+	.df_clkdiv	= _dfi,						\
+	.vcc_core	= vcore,					\
+	.vcc_sram	= vsram,					\
+}
+
+static struct pxa3xx_freq_info pxa300_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+};
+
+static struct pxa3xx_freq_info pxa320_freqs[] = {
+	/*  CPU XL XN  HSS DMEM SMEM SRAM DFI VCC_CORE VCC_SRAM */
+	OP(104,  8, 1, 104, 260,  78, 104, 3, 1000, 1100), /* 104MHz */
+	OP(208, 16, 1, 104, 260, 104, 156, 2, 1000, 1100), /* 208MHz */
+	OP(416, 16, 2, 156, 260, 104, 208, 2, 1100, 1200), /* 416MHz */
+	OP(624, 24, 2, 208, 260, 208, 312, 3, 1375, 1400), /* 624MHz */
+	OP(806, 31, 2, 208, 260, 208, 312, 3, 1400, 1400), /* 806MHz */
+};
+
+static unsigned int pxa3xx_freqs_num;
+static struct pxa3xx_freq_info *pxa3xx_freqs;
+static struct cpufreq_frequency_table *pxa3xx_freqs_table;
+
+static int setup_freqs_table(struct cpufreq_policy *policy,
+			     struct pxa3xx_freq_info *freqs, int num)
+{
+	struct cpufreq_frequency_table *table;
+	int i;
+
+	table = kzalloc((num + 1) * sizeof(*table), GFP_KERNEL);
+	if (table == NULL)
+		return -ENOMEM;
+
+	for (i = 0; i < num; i++) {
+		table[i].index = i;
+		table[i].frequency = freqs[i].cpufreq_mhz * 1000;
+	}
+	table[num].frequency = i;
+	table[num].frequency = CPUFREQ_TABLE_END;
+
+	pxa3xx_freqs = freqs;
+	pxa3xx_freqs_num = num;
+	pxa3xx_freqs_table = table;
+
+	return cpufreq_frequency_table_cpuinfo(policy, table);
+}
+
+static void __update_core_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask = ACCR_XN_MASK | ACCR_XL_MASK;
+	uint32_t accr = ACCR;
+	uint32_t xclkcfg;
+
+	accr &= ~(ACCR_XN_MASK | ACCR_XL_MASK | ACCR_XSPCLK_MASK);
+	accr |= ACCR_XN(info->core_xn) | ACCR_XL(info->core_xl);
+
+	/* No clock until core PLL is re-locked */
+	accr |= ACCR_XSPCLK(XSPCLK_NONE);
+
+	xclkcfg = (info->core_xn == 2) ? 0x3 : 0x2;	/* turbo bit */
+
+	ACCR = accr;
+	__asm__("mcr p14, 0, %0, c6, c0, 0\n" : : "r"(xclkcfg));
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static void __update_bus_freq(struct pxa3xx_freq_info *info)
+{
+	uint32_t mask;
+	uint32_t accr = ACCR;
+
+	mask = ACCR_SMCFS_MASK | ACCR_SFLFS_MASK | ACCR_HSS_MASK |
+		ACCR_DMCFS_MASK;
+
+	accr &= ~mask;
+	accr |= ACCR_SMCFS(info->smcfs) | ACCR_SFLFS(info->sflfs) |
+		ACCR_HSS(info->hss) | ACCR_DMCFS(info->dmcfs);
+
+	ACCR = accr;
+
+	while ((ACSR & mask) != (accr & mask))
+		cpu_relax();
+}
+
+static int pxa3xx_cpufreq_verify(struct cpufreq_policy *policy)
+{
+	return cpufreq_frequency_table_verify(policy, pxa3xx_freqs_table);
+}
+
+static unsigned int pxa3xx_cpufreq_get(unsigned int cpu)
+{
+	return get_clk_frequency_khz(0);
+}
+
+static int pxa3xx_cpufreq_set(struct cpufreq_policy *policy,
+			      unsigned int target_freq,
+			      unsigned int relation)
+{
+	struct pxa3xx_freq_info *next;
+	struct cpufreq_freqs freqs;
+	unsigned long flags;
+	int idx;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/* Lookup the next frequency */
+	if (cpufreq_frequency_table_target(policy, pxa3xx_freqs_table,
+				target_freq, relation, &idx))
+		return -EINVAL;
+
+	next = &pxa3xx_freqs[idx];
+
+	freqs.old = policy->cur;
+	freqs.new = next->cpufreq_mhz * 1000;
+	freqs.cpu = policy->cpu;
+
+	pr_debug("CPU frequency from %d MHz to %d MHz%s\n",
+			freqs.old / 1000, freqs.new / 1000,
+			(freqs.old == freqs.new) ? " (skipped)" : "");
+
+	if (freqs.old == target_freq)
+		return 0;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	local_irq_save(flags);
+	__update_core_freq(next);
+	__update_bus_freq(next);
+	local_irq_restore(flags);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return 0;
+}
+
+static __init int pxa3xx_cpufreq_init(struct cpufreq_policy *policy)
+{
+	int ret = -EINVAL;
+
+	/* set default policy and cpuinfo */
+	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
+	policy->cpuinfo.min_freq = 104000;
+	policy->cpuinfo.max_freq = (cpu_is_pxa320()) ? 806000 : 624000;
+	policy->cpuinfo.transition_latency = 1000; /* FIXME: 1 ms, assumed */
+	policy->cur = policy->min = policy->max = get_clk_frequency_khz(0);
+
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa300_freqs));
+
+	if (cpu_is_pxa320())
+		ret = setup_freqs_table(policy, ARRAY_AND_SIZE(pxa320_freqs));
+
+	if (ret) {
+		pr_err("failed to setup frequency table\n");
+		return ret;
+	}
+
+	pr_info("CPUFREQ support for PXA3xx initialized\n");
+	return 0;
+}
+
+static struct cpufreq_driver pxa3xx_cpufreq_driver = {
+	.verify		= pxa3xx_cpufreq_verify,
+	.target		= pxa3xx_cpufreq_set,
+	.init		= pxa3xx_cpufreq_init,
+	.get		= pxa3xx_cpufreq_get,
+	.name		= "pxa3xx-cpufreq",
+};
+
+static int __init cpufreq_init(void)
+{
+	if (cpu_is_pxa3xx())
+		return cpufreq_register_driver(&pxa3xx_cpufreq_driver);
+
+	return 0;
+}
+module_init(cpufreq_init);
+
+static void __exit cpufreq_exit(void)
+{
+	cpufreq_unregister_driver(&pxa3xx_cpufreq_driver);
+}
+module_exit(cpufreq_exit);
+
+MODULE_DESCRIPTION("CPU frequency scaling driver for PXA3xx");
+MODULE_LICENSE("GPL");
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index d6c05b6..35736fc 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -4,17 +4,22 @@
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/camera.h>
+#include <mach/gpio.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/camera.h>
+#include <mach/audio.h>
+#include <mach/pxa3xx_nand.h>
 
 #include "devices.h"
+#include "generic.h"
 
 void __init pxa_register_device(struct platform_device *dev, void *data)
 {
@@ -91,8 +96,19 @@ static struct resource pxa2xx_udc_resources[] = {
 
 static u64 udc_dma_mask = ~(u32)0;
 
-struct platform_device pxa_device_udc = {
-	.name		= "pxa2xx-udc",
+struct platform_device pxa25x_device_udc = {
+	.name		= "pxa25x-udc",
+	.id		= -1,
+	.resource	= pxa2xx_udc_resources,
+	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
+	.dev		=  {
+		.platform_data	= &pxa_udc_info,
+		.dma_mask	= &udc_dma_mask,
+	}
+};
+
+struct platform_device pxa27x_device_udc = {
+	.name		= "pxa27x-udc",
 	.id		= -1,
 	.resource	= pxa2xx_udc_resources,
 	.num_resources	= ARRAY_SIZE(pxa2xx_udc_resources),
@@ -233,8 +249,15 @@ struct platform_device pxa_device_i2c = {
 	.num_resources	= ARRAY_SIZE(pxai2c_resources),
 };
 
+static unsigned long pxa27x_i2c_mfp_cfg[] = {
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
+	if (cpu_is_pxa27x())
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
 	pxa_register_device(&pxa_device_i2c, info);
 }
 
@@ -278,8 +301,69 @@ struct platform_device pxa_device_rtc = {
 	.id		= -1,
 };
 
+static struct resource pxa_ac97_resources[] = {
+	[0] = {
+		.start  = 0x40500000,
+		.end	= 0x40500000 + 0xfff,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_AC97,
+		.end    = IRQ_AC97,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static u64 pxa_ac97_dmamask = 0xffffffffUL;
+
+struct platform_device pxa_device_ac97 = {
+	.name           = "pxa2xx-ac97",
+	.id             = -1,
+	.dev            = {
+		.dma_mask = &pxa_ac97_dmamask,
+		.coherent_dma_mask = 0xffffffff,
+	},
+	.num_resources  = ARRAY_SIZE(pxa_ac97_resources),
+	.resource       = pxa_ac97_resources,
+};
+
+void __init pxa_set_ac97_info(pxa2xx_audio_ops_t *ops)
+{
+	pxa_register_device(&pxa_device_ac97, ops);
+}
+
 #ifdef CONFIG_PXA25x
 
+static struct resource pxa25x_resource_pwm0[] = {
+	[0] = {
+		.start	= 0x40b00000,
+		.end	= 0x40b0000f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa25x_device_pwm0 = {
+	.name		= "pxa25x-pwm",
+	.id		= 0,
+	.resource	= pxa25x_resource_pwm0,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm0),
+};
+
+static struct resource pxa25x_resource_pwm1[] = {
+	[0] = {
+		.start	= 0x40c00000,
+		.end	= 0x40c0000f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa25x_device_pwm1 = {
+	.name		= "pxa25x-pwm",
+	.id		= 1,
+	.resource	= pxa25x_resource_pwm1,
+	.num_resources	= ARRAY_SIZE(pxa25x_resource_pwm1),
+};
+
 static u64 pxa25x_ssp_dma_mask = DMA_BIT_MASK(32);
 
 static struct resource pxa25x_resource_ssp[] = {
@@ -568,6 +652,36 @@ struct platform_device pxa27x_device_ssp3 = {
 	.num_resources	= ARRAY_SIZE(pxa27x_resource_ssp3),
 };
 
+static struct resource pxa27x_resource_pwm0[] = {
+	[0] = {
+		.start	= 0x40b00000,
+		.end	= 0x40b0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa27x_device_pwm0 = {
+	.name		= "pxa27x-pwm",
+	.id		= 0,
+	.resource	= pxa27x_resource_pwm0,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm0),
+};
+
+static struct resource pxa27x_resource_pwm1[] = {
+	[0] = {
+		.start	= 0x40c00000,
+		.end	= 0x40c0001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+struct platform_device pxa27x_device_pwm1 = {
+	.name		= "pxa27x-pwm",
+	.id		= 1,
+	.resource	= pxa27x_resource_pwm1,
+	.num_resources	= ARRAY_SIZE(pxa27x_resource_pwm1),
+};
+
 static struct resource pxa27x_resource_camera[] = {
 	[0] = {
 		.start	= 0x50000000,
@@ -718,4 +832,63 @@ void __init pxa3xx_set_mci3_info(struct pxamci_platform_data *info)
 	pxa_register_device(&pxa3xx_device_mci3, info);
 }
 
+static struct resource pxa3xx_resources_nand[] = {
+	[0] = {
+		.start	= 0x43100000,
+		.end	= 0x43100053,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_NAND,
+		.end	= IRQ_NAND,
+		.flags	= IORESOURCE_IRQ,
+	},
+	[2] = {
+		/* DRCMR for Data DMA */
+		.start	= 97,
+		.end	= 97,
+		.flags	= IORESOURCE_DMA,
+	},
+	[3] = {
+		/* DRCMR for Command DMA */
+		.start	= 99,
+		.end	= 99,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static u64 pxa3xx_nand_dma_mask = DMA_BIT_MASK(32);
+
+struct platform_device pxa3xx_device_nand = {
+	.name		= "pxa3xx-nand",
+	.id		= -1,
+	.dev		= {
+		.dma_mask = &pxa3xx_nand_dma_mask,
+		.coherent_dma_mask = DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(pxa3xx_resources_nand),
+	.resource	= pxa3xx_resources_nand,
+};
+
+void __init pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info)
+{
+	pxa_register_device(&pxa3xx_device_nand, info);
+}
 #endif /* CONFIG_PXA3xx */
+
+/* pxa2xx-spi platform-device ID equals respective SSP platform-device ID + 1.
+ * See comment in arch/arm/mach-pxa/ssp.c::ssp_probe() */
+void __init pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info)
+{
+	struct platform_device *pd;
+
+	pd = platform_device_alloc("pxa2xx-spi", id);
+	if (pd == NULL) {
+		printk(KERN_ERR "pxa2xx-spi: failed to allocate device id %d\n",
+		       id);
+		return;
+	}
+
+	pd->dev.platform_data = info;
+	platform_device_add(pd);
+}
diff --git a/arch/arm/mach-pxa/devices.h b/arch/arm/mach-pxa/devices.h
index fcab017..bb04af4 100644
--- a/arch/arm/mach-pxa/devices.h
+++ b/arch/arm/mach-pxa/devices.h
@@ -1,7 +1,8 @@
 extern struct platform_device pxa_device_mci;
 extern struct platform_device pxa3xx_device_mci2;
 extern struct platform_device pxa3xx_device_mci3;
-extern struct platform_device pxa_device_udc;
+extern struct platform_device pxa25x_device_udc;
+extern struct platform_device pxa27x_device_udc;
 extern struct platform_device pxa_device_fb;
 extern struct platform_device pxa_device_ffuart;
 extern struct platform_device pxa_device_btuart;
@@ -11,6 +12,7 @@ extern struct platform_device pxa_device_i2c;
 extern struct platform_device pxa_device_i2s;
 extern struct platform_device pxa_device_ficp;
 extern struct platform_device pxa_device_rtc;
+extern struct platform_device pxa_device_ac97;
 
 extern struct platform_device pxa27x_device_i2c_power;
 extern struct platform_device pxa27x_device_ohci;
@@ -24,4 +26,12 @@ extern struct platform_device pxa27x_device_ssp2;
 extern struct platform_device pxa27x_device_ssp3;
 extern struct platform_device pxa3xx_device_ssp4;
 
+extern struct platform_device pxa25x_device_pwm0;
+extern struct platform_device pxa25x_device_pwm1;
+extern struct platform_device pxa27x_device_pwm0;
+extern struct platform_device pxa27x_device_pwm1;
+
+extern struct platform_device pxa3xx_device_nand;
+extern struct platform_device pxa3xx_device_i2c_power;
+
 void __init pxa_register_device(struct platform_device *dev, void *data);
diff --git a/arch/arm/mach-pxa/dma.c b/arch/arm/mach-pxa/dma.c
index 3215316..c0be17e 100644
--- a/arch/arm/mach-pxa/dma.c
+++ b/arch/arm/mach-pxa/dma.c
@@ -20,10 +20,10 @@
 
 #include <asm/system.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/dma.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 
 struct dma_channel {
 	char *name;
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
new file mode 100644
index 0000000..d488ede
--- /dev/null
+++ b/arch/arm/mach-pxa/e330.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e330_init(void)
+{
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E330, "Toshiba e330")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e330_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
new file mode 100644
index 0000000..8ecbc54
--- /dev/null
+++ b/arch/arm/mach-pxa/e350.c
@@ -0,0 +1,43 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+static void __init e350_init(void)
+{
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E350, "Toshiba e350")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e350_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
new file mode 100644
index 0000000..544bbaa
--- /dev/null
+++ b/arch/arm/mach-pxa/e400.c
@@ -0,0 +1,94 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+
+#include <mach/pxafb.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ E400 LCD definitions ------------------------ */
+
+static struct pxafb_mode_info e400_pxafb_mode_info = {
+	.pixclock       = 140703,
+	.xres           = 240,
+	.yres           = 320,
+	.bpp            = 16,
+	.hsync_len      = 4,
+	.left_margin    = 28,
+	.right_margin   = 8,
+	.vsync_len      = 3,
+	.upper_margin   = 5,
+	.lower_margin   = 6,
+	.sync           = 0,
+};
+
+static struct pxafb_mach_info e400_pxafb_mach_info = {
+	.modes          = &e400_pxafb_mode_info,
+	.num_modes      = 1,
+	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act,
+	.lccr3          = 0,
+	.pxafb_backlight_power  = NULL,
+};
+
+/* ------------------------ E400 MFP config ----------------------------- */
+
+static unsigned long e400_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ---------------------------------------------------------------------- */
+
+static void __init e400_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	set_pxa_fb_info(&e400_pxafb_mach_info);
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E400, "Toshiba e400")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e400_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
new file mode 100644
index 0000000..c57a15b
--- /dev/null
+++ b/arch/arm/mach-pxa/e740.c
@@ -0,0 +1,169 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+
+/* ------------------------ e740 video support --------------------------- */
+
+static struct w100_gen_regs e740_lcd_regs = {
+	.lcd_format =            0x00008023,
+	.lcdd_cntl1 =            0x0f000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00ffff03,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e740_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 20,
+	.right_margin    = 28,
+	.upper_margin    = 9,
+	.lower_margin    = 8,
+	.crtc_ss         = 0x80140013,
+	.crtc_ls         = 0x81150110,
+	.crtc_gs         = 0x80050005,
+	.crtc_vpos_gs    = 0x000a0009,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa906000a,
+	.crtc_gclk       = 0x80050108,
+	.crtc_goe        = 0x80050108,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+	.crtc_ps1_active =       0x41060010,
+};
+
+static struct w100_gpio_regs e740_w100_gpio_info = {
+	.init_data1 = 0x21002103,
+	.gpio_dir1  = 0xffffdeff,
+	.gpio_oe1   = 0x03c00643,
+	.init_data2 = 0x003f003f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000000ff,
+};
+
+static struct w100fb_mach_info e740_fb_info = {
+	.modelist   = &e740_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e740_lcd_regs,
+	.gpio       = &e740_w100_gpio_info,
+	.xtal_freq = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e740_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e740_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e740_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e740_fb_resources),
+	.resource       = e740_fb_resources,
+};
+
+/* --------------------------- MFP Pin config -------------------------- */
+
+static unsigned long e740_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,   /* CS1 - Flash */
+	GPIO79_nCS_3,   /* CS3 - IMAGEON */
+	GPIO80_nCS_4,   /* CS4 - TMIO */
+
+	/* Clocks */
+	GPIO12_32KHz,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_GPIO, /* Used by TMIO for #SUSPEND */
+
+	/* PC Card */
+	GPIO8_GPIO,   /* CD0 */
+	GPIO44_GPIO,  /* CD1 */
+	GPIO11_GPIO,  /* IRQ0 */
+	GPIO6_GPIO,   /* IRQ1 */
+	GPIO27_GPIO,  /* RST0 */
+	GPIO24_GPIO,  /* RST1 */
+	GPIO20_GPIO,  /* PWR0 */
+	GPIO23_GPIO,  /* PWR1 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* wakeup */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e740_fb_device,
+};
+
+static void __init e740_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E740, "Toshiba e740")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e740_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
new file mode 100644
index 0000000..640e738
--- /dev/null
+++ b/arch/arm/mach-pxa/e750.c
@@ -0,0 +1,126 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ---------------------- E750 LCD definitions -------------------- */
+
+static struct w100_gen_regs e750_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x00000000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x00fff003,
+	.genlcd_cntl2 =          0x003c0f03,
+	.genlcd_cntl3 =          0x000143aa,
+};
+
+static struct w100_mode e750_lcd_mode = {
+	.xres            = 240,
+	.yres            = 320,
+	.left_margin     = 21,
+	.right_margin    = 22,
+	.upper_margin    = 5,
+	.lower_margin    = 4,
+	.crtc_ss         = 0x80150014,
+	.crtc_ls         = 0x8014000d,
+	.crtc_gs         = 0xc1000005,
+	.crtc_vpos_gs    = 0x00020147,
+	.crtc_rev        = 0x0040010a,
+	.crtc_dclk       = 0xa1700030,
+	.crtc_gclk       = 0x80cc0015,
+	.crtc_goe        = 0x80cc0015,
+	.crtc_ps1_active = 0x61060017,
+	.pll_freq        = 57,
+	.pixclk_divider         = 4,
+	.pixclk_divider_rotated = 4,
+	.pixclk_src     = CLK_SRC_XTAL,
+	.sysclk_divider  = 1,
+	.sysclk_src     = CLK_SRC_PLL,
+};
+
+static struct w100_gpio_regs e750_w100_gpio_info = {
+	.init_data1 = 0x01192f1b,
+	.gpio_dir1  = 0xd5ffdeff,
+	.gpio_oe1   = 0x000020bf,
+	.init_data2 = 0x010f010f,
+	.gpio_dir2  = 0xffffffff,
+	.gpio_oe2   = 0x000001cf,
+};
+
+static struct w100fb_mach_info e750_fb_info = {
+	.modelist   = &e750_lcd_mode,
+	.num_modes  = 1,
+	.regs       = &e750_lcd_regs,
+	.gpio       = &e750_w100_gpio_info,
+	.xtal_freq  = 14318000,
+	.xtal_dbl   = 1,
+};
+
+static struct resource e750_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e750_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e750_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e750_fb_resources),
+	.resource       = e750_fb_resources,
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e750_fb_device,
+};
+
+static void __init e750_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e7xx_udc_mach_info);
+}
+
+MACHINE_START(E750, "Toshiba e750")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e750_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
new file mode 100644
index 0000000..a293e09
--- /dev/null
+++ b/arch/arm/mach-pxa/e800.c
@@ -0,0 +1,186 @@
+/*
+ * Hardware definitions for the Toshiba eseries PDAs
+ *
+ * Copyright (c) 2003 Ian Molton <spyro@f2s.com>
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+
+#include <video/w100fb.h>
+
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach-types.h>
+
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "eseries.h"
+
+/* ------------------------ e800 LCD definitions ------------------------- */
+
+static struct w100_gen_regs e800_lcd_regs = {
+	.lcd_format =            0x00008003,
+	.lcdd_cntl1 =            0x02a00000,
+	.lcdd_cntl2 =            0x0003ffff,
+	.genlcd_cntl1 =          0x000ff2a3,
+	.genlcd_cntl2 =          0x000002a3,
+	.genlcd_cntl3 =          0x000102aa,
+};
+
+static struct w100_mode e800_lcd_mode[2] = {
+	[0] = {
+		.xres            = 480,
+		.yres            = 640,
+		.left_margin     = 52,
+		.right_margin    = 148,
+		.upper_margin    = 2,
+		.lower_margin    = 6,
+		.crtc_ss         = 0x80350034,
+		.crtc_ls         = 0x802b0026,
+		.crtc_gs         = 0x80160016,
+		.crtc_vpos_gs    = 0x00020003,
+		.crtc_rev        = 0x0040001d,
+		.crtc_dclk       = 0xe0000000,
+		.crtc_gclk       = 0x82a50049,
+		.crtc_goe        = 0x80ee001c,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 128,
+		.pixclk_divider         = 4,
+		.pixclk_divider_rotated = 6,
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	},
+	[1] = {
+		.xres            = 240,
+		.yres            = 320,
+		.left_margin     = 15,
+		.right_margin    = 88,
+		.upper_margin    = 0,
+		.lower_margin    = 7,
+		.crtc_ss         = 0xd010000f,
+		.crtc_ls         = 0x80070003,
+		.crtc_gs         = 0x80000000,
+		.crtc_vpos_gs    = 0x01460147,
+		.crtc_rev        = 0x00400003,
+		.crtc_dclk       = 0xa1700030,
+		.crtc_gclk       = 0x814b0008,
+		.crtc_goe        = 0x80cc0015,
+		.crtc_ps1_active = 0x00000000,
+		.pll_freq        = 100,
+		.pixclk_divider         = 6, /* Wince uses 14 which gives a */
+		.pixclk_divider_rotated = 6, /* 7MHz Pclk. We use a 14MHz one */
+		.pixclk_src     = CLK_SRC_PLL,
+		.sysclk_divider  = 0,
+		.sysclk_src     = CLK_SRC_PLL,
+	}
+};
+
+
+static struct w100_gpio_regs e800_w100_gpio_info = {
+	.init_data1 = 0xc13fc019,
+	.gpio_dir1  = 0x3e40df7f,
+	.gpio_oe1   = 0x003c3000,
+	.init_data2 = 0x00000000,
+	.gpio_dir2  = 0x00000000,
+	.gpio_oe2   = 0x00000000,
+};
+
+static struct w100_mem_info e800_w100_mem_info = {
+	.ext_cntl        = 0x09640011,
+	.sdram_mode_reg  = 0x00600021,
+	.ext_timing_cntl = 0x10001545,
+	.io_cntl         = 0x7ddd7333,
+	.size            = 0x1fffff,
+};
+
+static void e800_tg_change(struct w100fb_par *par)
+{
+	unsigned long tmp;
+
+	tmp = w100fb_gpio_read(W100_GPIO_PORT_A);
+	if (par->mode->xres == 480)
+		tmp |= 0x100;
+	else
+		tmp &= ~0x100;
+	w100fb_gpio_write(W100_GPIO_PORT_A, tmp);
+}
+
+static struct w100_tg_info e800_tg_info = {
+	.change = e800_tg_change,
+};
+
+static struct w100fb_mach_info e800_fb_info = {
+	.modelist   = e800_lcd_mode,
+	.num_modes  = 2,
+	.regs       = &e800_lcd_regs,
+	.gpio       = &e800_w100_gpio_info,
+	.mem        = &e800_w100_mem_info,
+	.tg         = &e800_tg_info,
+	.xtal_freq  = 16000000,
+};
+
+static struct resource e800_fb_resources[] = {
+	[0] = {
+		.start          = 0x0c000000,
+		.end            = 0x0cffffff,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device e800_fb_device = {
+	.name           = "w100fb",
+	.id             = -1,
+	.dev            = {
+		.platform_data  = &e800_fb_info,
+	},
+	.num_resources  = ARRAY_SIZE(e800_fb_resources),
+	.resource       = e800_fb_resources,
+};
+
+/* --------------------------- UDC definitions --------------------------- */
+
+static struct pxa2xx_udc_mach_info e800_udc_mach_info = {
+	.gpio_vbus   = GPIO_E800_USB_DISC,
+	.gpio_pullup = GPIO_E800_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
+
+/* ----------------------------------------------------------------------- */
+
+static struct platform_device *devices[] __initdata = {
+	&e800_fb_device,
+};
+
+static void __init e800_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa_set_udc_info(&e800_udc_mach_info);
+}
+
+MACHINE_START(E800, "Toshiba e800")
+	/* Maintainer: Ian Molton (spyro@f2s.com) */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.fixup		= eseries_fixup,
+	.init_machine	= e800_init,
+	.timer		= &pxa_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index 9c57700..f5ed803 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -1,7 +1,7 @@
 /*
- * Support for CompuLab EM-x270 platform
+ * Support for CompuLab EM-X270 platform
  *
- * Copyright (C) 2007 CompuLab, Ltd.
+ * Copyright (C) 2007, 2008 CompuLab, Ltd.
  * Author: Mike Rapoport <mike@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -14,29 +14,159 @@
 
 #include <linux/dm9000.h>
 #include <linux/rtc-v3020.h>
-
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/gpio.h>
 
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/bitfield.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 
 /* GPIO IRQ usage */
-#define EM_X270_MMC_PD		(105)
-#define EM_X270_ETHIRQ		IRQ_GPIO(41)
-#define EM_X270_MMC_IRQ		IRQ_GPIO(13)
+#define GPIO41_ETHIRQ		(41)
+#define GPIO13_MMC_CD		(13)
+#define EM_X270_ETHIRQ		IRQ_GPIO(GPIO41_ETHIRQ)
+#define EM_X270_MMC_CD		IRQ_GPIO(GPIO13_MMC_CD)
+
+/* NAND control GPIOs */
+#define GPIO11_NAND_CS	(11)
+#define GPIO56_NAND_RB	(56)
+
+static unsigned long em_x270_pin_config[] = {
+	/* AC'97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+	GPIO98_AC97_SYSCLK,
+	GPIO113_AC97_nRESET,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MCI controller */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* QCI */
+	GPIO84_CIF_FV,
+	GPIO25_CIF_LV,
+	GPIO53_CIF_MCLK,
+	GPIO54_CIF_PCLK,
+	GPIO81_CIF_DD_0,
+	GPIO55_CIF_DD_1,
+	GPIO51_CIF_DD_2,
+	GPIO50_CIF_DD_3,
+	GPIO52_CIF_DD_4,
+	GPIO48_CIF_DD_5,
+	GPIO17_CIF_DD_6,
+	GPIO12_CIF_DD_7,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* Keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO34_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO39_KP_MKIN_4	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO91_KP_MKIN_6	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO36_KP_MKIN_7	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+	GPIO106_KP_MKOUT_3,
+	GPIO107_KP_MKOUT_4,
+	GPIO108_KP_MKOUT_5,
+	GPIO96_KP_MKOUT_6,
+	GPIO22_KP_MKOUT_7,
+
+	/* SSP1 */
+	GPIO26_SSP1_RXD,
+	GPIO23_SSP1_SCLK,
+	GPIO24_SSP1_SFRM,
+	GPIO57_SSP1_TXD,
+
+	/* SSP2 */
+	GPIO19_SSP2_SCLK,
+	GPIO14_SSP2_SFRM,
+	GPIO89_SSP2_TXD,
+	GPIO88_SSP2_RXD,
+
+	/* SDRAM and local bus */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO49_nPWE,
+	GPIO18_RDY,
+
+	/* GPIO */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+
+	/* power controls */
+	GPIO20_GPIO	| MFP_LPM_DRIVE_LOW,	/* GPRS_PWEN */
+	GPIO115_GPIO	| MFP_LPM_DRIVE_LOW,	/* WLAN_PWEN */
+
+	/* NAND controls */
+	GPIO11_GPIO	| MFP_LPM_DRIVE_HIGH,	/* NAND CE# */
+	GPIO56_GPIO,				/* NAND Ready/Busy */
+
+	/* interrupts */
+	GPIO13_GPIO,	/* MMC card detect */
+	GPIO41_GPIO,	/* DM9000 interrupt */
+};
 
-static struct resource em_x270_dm9k_resource[] = {
+#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
+static struct resource em_x270_dm9000_resource[] = {
 	[0] = {
 		.start = PXA_CS2_PHYS,
 		.end   = PXA_CS2_PHYS + 3,
@@ -54,38 +184,30 @@ static struct resource em_x270_dm9k_resource[] = {
 	}
 };
 
-/* for the moment we limit ourselves to 32bit IO until some
- * better IO routines can be written and tested
- */
-static struct dm9000_plat_data em_x270_dm9k_platdata = {
+static struct dm9000_plat_data em_x270_dm9000_platdata = {
 	.flags		= DM9000_PLATF_32BITONLY,
 };
 
-/* Ethernet device */
-static struct platform_device em_x270_dm9k = {
+static struct platform_device em_x270_dm9000 = {
 	.name		= "dm9000",
 	.id		= 0,
-	.num_resources	= ARRAY_SIZE(em_x270_dm9k_resource),
-	.resource	= em_x270_dm9k_resource,
+	.num_resources	= ARRAY_SIZE(em_x270_dm9000_resource),
+	.resource	= em_x270_dm9000_resource,
 	.dev		= {
-		.platform_data = &em_x270_dm9k_platdata,
+		.platform_data = &em_x270_dm9000_platdata,
 	}
 };
 
-/* audio device */
-static struct platform_device em_x270_audio = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
-/* WM9712 touchscreen controller. Hopefully the driver will make it to
- * the mainstream sometime */
-static struct platform_device em_x270_ts = {
-	.name		= "wm97xx-ts",
-	.id		= -1,
-};
+static void __init em_x270_init_dm9000(void)
+{
+	platform_device_register(&em_x270_dm9000);
+}
+#else
+static inline void em_x270_init_dm9000(void) {}
+#endif
 
-/* RTC */
+/* V3020 RTC */
+#if defined(CONFIG_RTC_DRV_V3020) || defined(CONFIG_RTC_DRV_V3020_MODULE)
 static struct resource em_x270_v3020_resource[] = {
 	[0] = {
 		.start = PXA_CS4_PHYS,
@@ -108,20 +230,26 @@ static struct platform_device em_x270_rtc = {
 	}
 };
 
-/* NAND flash */
-#define GPIO_NAND_CS	(11)
-#define GPIO_NAND_RB	(56)
+static void __init em_x270_init_rtc(void)
+{
+	platform_device_register(&em_x270_rtc);
+}
+#else
+static inline void em_x270_init_rtc(void) {}
+#endif
 
+/* NAND flash */
+#if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
 static inline void nand_cs_on(void)
 {
-	GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 0);
 }
 
 static void nand_cs_off(void)
 {
 	dsb();
 
-	GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
+	gpio_set_value(GPIO11_NAND_CS, 1);
 }
 
 /* hardware specific access to control-lines */
@@ -161,7 +289,7 @@ static int em_x270_nand_device_ready(struct mtd_info *mtd)
 {
 	dsb();
 
-	return GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB);
+	return gpio_get_value(GPIO56_NAND_RB);
 }
 
 static struct mtd_partition em_x270_partition_info[] = {
@@ -214,23 +342,37 @@ static struct platform_device em_x270_nand = {
 	}
 };
 
-/* platform devices */
-static struct platform_device *platform_devices[] __initdata = {
-	&em_x270_dm9k,
-	&em_x270_audio,
-	&em_x270_ts,
-	&em_x270_rtc,
-	&em_x270_nand,
-};
+static void __init em_x270_init_nand(void)
+{
+	int err;
+
+	err = gpio_request(GPIO11_NAND_CS, "NAND CS");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND CS gpio\n");
+		return;
+	}
+
+	gpio_direction_output(GPIO11_NAND_CS, 1);
+
+	err = gpio_request(GPIO56_NAND_RB, "NAND R/B");
+	if (err) {
+		pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+		gpio_free(GPIO11_NAND_CS);
+		return;
+	}
 
+	gpio_direction_input(GPIO56_NAND_RB);
+
+	platform_device_register(&em_x270_nand);
+}
+#else
+static inline void em_x270_init_nand(void) {}
+#endif
 
 /* PXA27x OHCI controller setup */
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
 static int em_x270_ohci_init(struct device *dev)
 {
-	/* Set the Power Control Polarity Low */
-	UHCHR = (UHCHR | UHCHR_PCPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSE);
-
 	/* enable port 2 transiever */
 	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE;
 
@@ -239,30 +381,27 @@ static int em_x270_ohci_init(struct device *dev)
 
 static struct pxaohci_platform_data em_x270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
 	.init		= em_x270_ohci_init,
 };
 
+static void __init em_x270_init_ohci(void)
+{
+	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+}
+#else
+static inline void em_x270_init_ohci(void) {}
+#endif
 
+/* MCI controller setup */
+#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
 static int em_x270_mci_init(struct device *dev,
 			    irq_handler_t em_x270_detect_int,
 			    void *data)
 {
-	int err;
-
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	/* EM-X270 uses GPIO13 as SD power enable */
-	pxa_gpio_mode(EM_X270_MMC_PD | GPIO_OUT);
-
-	err = request_irq(EM_X270_MMC_IRQ, em_x270_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
+	int err = request_irq(EM_X270_MMC_CD, em_x270_detect_int,
+			      IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			      "MMC card detect", data);
 	if (err) {
 		printk(KERN_ERR "%s: can't request MMC card detect IRQ: %d\n",
 		       __func__, err);
@@ -284,7 +423,8 @@ static void em_x270_mci_setpower(struct device *dev, unsigned int vdd)
 
 static void em_x270_mci_exit(struct device *dev, void *data)
 {
-	free_irq(EM_X270_MMC_IRQ, data);
+	int irq = gpio_to_irq(GPIO13_MMC_CD);
+	free_irq(irq, data);
 }
 
 static struct pxamci_platform_data em_x270_mci_platform_data = {
@@ -294,7 +434,16 @@ static struct pxamci_platform_data em_x270_mci_platform_data = {
 	.exit		= em_x270_mci_exit,
 };
 
+static void __init em_x270_init_mmc(void)
+{
+	pxa_set_mci_info(&em_x270_mci_platform_data);
+}
+#else
+static inline void em_x270_init_mmc(void) {}
+#endif
+
 /* LCD 480x640 */
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info em_x270_lcd_mode = {
 	.pixclock	= 50000,
 	.bpp		= 16,
@@ -312,39 +461,96 @@ static struct pxafb_mode_info em_x270_lcd_mode = {
 static struct pxafb_mach_info em_x270_lcd = {
 	.modes		= &em_x270_lcd_mode,
 	.num_modes	= 1,
-	.cmap_inverse	= 0,
-	.cmap_static	= 0,
-	.lccr0		= LCCR0_PAS,
-	.lccr3		= LCCR3_PixClkDiv(0x01) | LCCR3_Acb(0xff),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
-
-static void __init em_x270_init(void)
+static void __init em_x270_init_lcd(void)
 {
-	/* setup LCD */
 	set_pxa_fb_info(&em_x270_lcd);
+}
+#else
+static inline void em_x270_init_lcd(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_AC97) || defined(CONFIG_SND_PXA2XX_AC97_MODULE)
+static void __init em_x270_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void em_x270_init_ac97(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
+static unsigned int em_x270_matrix_keys[] = {
+	KEY(0, 0, KEY_A), KEY(1, 0, KEY_UP), KEY(2, 1, KEY_B),
+	KEY(0, 2, KEY_LEFT), KEY(1, 1, KEY_ENTER), KEY(2, 0, KEY_RIGHT),
+	KEY(0, 1, KEY_C), KEY(1, 2, KEY_DOWN), KEY(2, 2, KEY_D),
+};
 
-	/* register EM-X270 platform devices */
-	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+struct pxa27x_keypad_platform_data em_x270_keypad_info = {
+	/* code map for the matrix keys */
+	.matrix_key_rows	= 3,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= em_x270_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(em_x270_matrix_keys),
+};
 
-	/* set MCI and OHCI platform parameters */
-	pxa_set_mci_info(&em_x270_mci_platform_data);
-	pxa_set_ohci_info(&em_x270_ohci_platform_data);
+static void __init em_x270_init_keypad(void)
+{
+	pxa_set_keypad_info(&em_x270_keypad_info);
+}
+#else
+static inline void em_x270_init_keypad(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+static struct gpio_keys_button gpio_keys_button[] = {
+	[0] = {
+		.desc	= "sleep/wakeup",
+		.code	= KEY_SUSPEND,
+		.type	= EV_PWR,
+		.gpio	= 1,
+		.wakeup	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data em_x270_gpio_keys_data = {
+	.buttons	= gpio_keys_button,
+	.nbuttons	= 1,
+};
 
-	/* setup STUART GPIOs */
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
+static struct platform_device em_x270_gpio_keys = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &em_x270_gpio_keys_data,
+	},
+};
 
-	/* setup BTUART GPIOs */
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
+static void __init em_x270_init_gpio_keys(void)
+{
+	platform_device_register(&em_x270_gpio_keys);
+}
+#else
+static inline void em_x270_init_gpio_keys(void) {}
+#endif
 
-	/* Setup interrupt for dm9000 */
-	set_irq_type(EM_X270_ETHIRQ, IRQT_RISING);
+static void __init em_x270_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_pin_config));
+
+	em_x270_init_dm9000();
+	em_x270_init_rtc();
+	em_x270_init_nand();
+	em_x270_init_lcd();
+	em_x270_init_mmc();
+	em_x270_init_ohci();
+	em_x270_init_keypad();
+	em_x270_init_gpio_keys();
+	em_x270_init_ac97();
 }
 
-MACHINE_START(EM_X270, "Compulab EM-x270")
+MACHINE_START(EM_X270, "Compulab EM-X270")
 	.boot_params	= 0xa0000100,
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c
index ee0ae93..d28849b 100644
--- a/arch/arm/mach-pxa/eseries.c
+++ b/arch/arm/mach-pxa/eseries.c
@@ -10,18 +10,23 @@
  *
  */
 
+#include <linux/kernel.h>
 #include <linux/init.h>
 
 #include <asm/setup.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
 #include <asm/mach-types.h>
 
-#include <generic.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/hardware.h>
+#include <mach/eseries-gpio.h>
+#include <mach/udc.h>
+
+#include "generic.h"
 
 /* Only e800 has 128MB RAM */
-static void __init eseries_fixup(struct machine_desc *desc,
-                      struct tag *tags, char **cmdline, struct meminfo *mi)
+void __init eseries_fixup(struct machine_desc *desc,
+	struct tag *tags, char **cmdline, struct meminfo *mi)
 {
 	mi->nr_banks=1;
 	mi->bank[0].start = 0xa0000000;
@@ -32,70 +37,9 @@ static void __init eseries_fixup(struct machine_desc *desc,
 		mi->bank[0].size = (64*1024*1024);
 }
 
-/* e-series machine definitions */
-
-#ifdef CONFIG_MACH_E330
-MACHINE_START(E330, "Toshiba e330")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E740
-MACHINE_START(E740, "Toshiba e740")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E750
-MACHINE_START(E750, "Toshiba e750")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E400
-MACHINE_START(E400, "Toshiba e400")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
-MACHINE_END
-#endif
-
-#ifdef CONFIG_MACH_E800
-MACHINE_START(E800, "Toshiba e800")
-        /* Maintainer: Ian Molton (spyro@f2s.com) */
-        .phys_io        = 0x40000000,
-        .io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
-        .boot_params    = 0xa0000100,
-        .map_io         = pxa_map_io,
-        .init_irq       = pxa25x_init_irq,
-        .fixup          = eseries_fixup,
-        .timer = &pxa_timer,
-MACHINE_END
-#endif
+struct pxa2xx_udc_mach_info e7xx_udc_mach_info = {
+	.gpio_vbus   = GPIO_E7XX_USB_DISC,
+	.gpio_pullup = GPIO_E7XX_USB_PULLUP,
+	.gpio_pullup_inverted = 1
+};
 
diff --git a/arch/arm/mach-pxa/eseries.h b/arch/arm/mach-pxa/eseries.h
new file mode 100644
index 0000000..a83f88d
--- /dev/null
+++ b/arch/arm/mach-pxa/eseries.h
@@ -0,0 +1,4 @@
+void __init eseries_fixup(struct machine_desc *desc,
+	struct tag *tags, char **cmdline, struct meminfo *mi);
+
+extern struct pxa2xx_udc_mach_info e7xx_udc_mach_info;
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
new file mode 100644
index 0000000..cc3d850
--- /dev/null
+++ b/arch/arm/mach-pxa/ezx.c
@@ -0,0 +1,220 @@
+/*
+ *  ezx.c - Common code for the EZX platform.
+ *
+ *  Copyright (C) 2005-2006 Harald Welte <laforge@openezx.org>,
+ *		  2007-2008 Daniel Ribeiro <drwyrm@gmail.com>,
+ *		  2007-2008 Stefan Schmidt <stefan@datenfreihafen.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/pwm_backlight.h>
+
+#include <asm/setup.h>
+#include <mach/pxafb.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
+
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static struct platform_pwm_backlight_data ezx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device ezx_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &ezx_backlight_data,
+	},
+};
+
+static struct pxafb_mode_info mode_ezx_old = {
+	.pixclock		= 150000,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_1 = {
+	.modes		= &mode_ezx_old,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
+};
+
+static struct pxafb_mode_info mode_72r89803y01 = {
+	.pixclock		= 192308,
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 32,
+	.depth			= 18,
+	.hsync_len		= 10,
+	.left_margin		= 20,
+	.right_margin		= 10,
+	.vsync_len		= 2,
+	.upper_margin		= 3,
+	.lower_margin		= 2,
+	.sync			= 0,
+};
+
+static struct pxafb_mach_info ezx_fb_info_2 = {
+	.modes		= &mode_72r89803y01,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_TFT_18BPP,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&ezx_backlight_device,
+};
+
+static unsigned long ezx_pin_config[] __initdata = {
+	/* PWM backlight */
+	GPIO16_PWM0_OUT,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* For A780 support (connected with Neptune GSM chip) */
+	GPIO30_USB_P3_2,	/* ICL_TXENB */
+	GPIO31_USB_P3_6,	/* ICL_VPOUT */
+	GPIO90_USB_P3_5,	/* ICL_VPIN */
+	GPIO91_USB_P3_1,	/* ICL_XRXD */
+	GPIO56_USB_P3_4,	/* ICL_VMOUT */
+	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+};
+
+static void __init ezx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(ezx_pin_config));
+	pxa_set_i2c_info(NULL);
+	if (machine_is_ezx_a780() || machine_is_ezx_e680())
+		set_pxa_fb_info(&ezx_fb_info_1);
+	else
+		set_pxa_fb_info(&ezx_fb_info_2);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init ezx_fixup(struct machine_desc *desc, struct tag *tags,
+		char **cmdline, struct meminfo *mi)
+{
+	/* We have two ram chips. First one with 32MB at 0xA0000000 and a second
+	 * 16MB one at 0xAC000000
+	 */
+	mi->nr_banks = 2;
+	mi->bank[0].start = 0xa0000000;
+	mi->bank[0].node = 0;
+	mi->bank[0].size = (32*1024*1024);
+	mi->bank[1].start = 0xac000000;
+	mi->bank[1].node = 1;
+	mi->bank[1].size = (16*1024*1024);
+}
+
+#ifdef CONFIG_MACH_EZX_A780
+MACHINE_START(EZX_A780, "Motorola EZX A780")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E680
+MACHINE_START(EZX_E680, "Motorola EZX E680")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A1200
+MACHINE_START(EZX_A1200, "Motorola EZX A1200")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_A910
+MACHINE_START(EZX_A910, "Motorola EZX A910")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E6
+MACHINE_START(EZX_E6, "Motorola EZX E6")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
+
+#ifdef CONFIG_MACH_EZX_E2
+MACHINE_START(EZX_E2, "Motorola EZX E2")
+	.phys_io        = 0x40000000,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.fixup			= ezx_fixup,
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = &ezx_init,
+MACHINE_END
+#endif
diff --git a/arch/arm/mach-pxa/generic.c b/arch/arm/mach-pxa/generic.c
index 4461793..85ed0b3 100644
--- a/arch/arm/mach-pxa/generic.c
+++ b/arch/arm/mach-pxa/generic.c
@@ -20,15 +20,25 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/system.h>
 #include <asm/pgtable.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
 
 #include "generic.h"
 
+void clear_reset_status(unsigned int mask)
+{
+	if (cpu_is_pxa2xx())
+		pxa2xx_clear_reset_status(mask);
+
+	if (cpu_is_pxa3xx())
+		pxa3xx_clear_reset_status(mask);
+}
+
 /*
  * Get the clock frequency as reflected by CCCR and the turbo flag.
  * We assume these values have been applied via a fcs.
@@ -36,7 +46,7 @@
  */
 unsigned int get_clk_frequency_khz(int info)
 {
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		return pxa25x_get_clk_frequency_khz(info);
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_clk_frequency_khz(info);
@@ -50,7 +60,7 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
  */
 unsigned int get_memclk_frequency_10khz(void)
 {
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		return pxa25x_get_memclk_frequency_10khz();
 	else if (cpu_is_pxa27x())
 		return pxa27x_get_memclk_frequency_10khz();
@@ -60,23 +70,6 @@ unsigned int get_memclk_frequency_10khz(void)
 EXPORT_SYMBOL(get_memclk_frequency_10khz);
 
 /*
- * Routine to safely enable or disable a clock in the CKEN
- */
-void __pxa_set_cken(int clock, int enable)
-{
-	unsigned long flags;
-	local_irq_save(flags);
-
-	if (enable)
-		CKEN |= (1 << clock);
-	else
-		CKEN &= ~(1 << clock);
-
-	local_irq_restore(flags);
-}
-EXPORT_SYMBOL(__pxa_set_cken);
-
-/*
  * Intel PXA2xx internal register mapping.
  *
  * Note 1: not all PXA2xx variants implement all those addresses.
@@ -95,11 +88,6 @@ static struct map_desc standard_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(0x48000000),
 		.length		= 0x00200000,
 		.type		= MT_DEVICE
-	}, {	/* USB host */
-		.virtual	=  0xf8000000,
-		.pfn		= __phys_to_pfn(0x4c000000),
-		.length		= 0x00100000,
-		.type		= MT_DEVICE
 	}, {	/* Camera */
 		.virtual	=  0xfa000000,
 		.pfn		= __phys_to_pfn(0x50000000),
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 5bb7ae7..dc876a8 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -47,14 +47,23 @@ extern unsigned pxa27x_get_memclk_frequency_10khz(void);
 #define pxa27x_get_memclk_frequency_10khz()	(0)
 #endif
 
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
 #ifdef CONFIG_PXA3xx
 extern unsigned pxa3xx_get_clk_frequency_khz(int);
 extern unsigned pxa3xx_get_memclk_frequency_10khz(void);
+extern void pxa3xx_clear_reset_status(unsigned int);
 #else
 #define pxa3xx_get_clk_frequency_khz(x)		(0)
 #define pxa3xx_get_memclk_frequency_10khz()	(0)
+static inline void pxa3xx_clear_reset_status(unsigned int mask) {}
 #endif
 
 extern struct sysdev_class pxa_irq_sysclass;
 extern struct sysdev_class pxa_gpio_sysclass;
+extern struct sysdev_class pxa2xx_mfp_sysclass;
 extern struct sysdev_class pxa3xx_mfp_sysclass;
diff --git a/arch/arm/mach-pxa/gpio.c b/arch/arm/mach-pxa/gpio.c
index 7d3e169..14930cf 100644
--- a/arch/arm/mach-pxa/gpio.c
+++ b/arch/arm/mach-pxa/gpio.c
@@ -16,12 +16,12 @@
 #include <linux/module.h>
 #include <linux/irq.h>
 #include <linux/sysdev.h>
+#include <linux/io.h>
 
 #include <asm/gpio.h>
-#include <asm/hardware.h>
-#include <asm/io.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
 
 #include "generic.h"
 
@@ -275,7 +275,7 @@ static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
 			loop = 1;
 
 			n = PXA_GPIO_IRQ_BASE + bit;
-			desc_handle_irq(n, irq_desc + n);
+			generic_handle_irq(n);
 
 			bit = find_next_bit(gedr, GEDR_BITS, bit + 1);
 		}
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index bdf2397..d8962a0 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -20,13 +20,17 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/err.h>
+#include <linux/clk.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -34,13 +38,13 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/gumstix.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/gumstix.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
 
 #include "generic.h"
 
@@ -85,21 +89,8 @@ static struct platform_device *devices[] __initdata = {
 };
 
 #ifdef CONFIG_MMC_PXA
-static struct pxamci_platform_data gumstix_mci_platform_data;
-
-static int gumstix_mci_init(struct device *dev, irq_handler_t detect_int,
-				void *data)
-{
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO53_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
-	return 0;
-}
-
 static struct pxamci_platform_data gumstix_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init		= gumstix_mci_init,
 };
 
 static void __init gumstix_mmc_init(void)
@@ -109,11 +100,11 @@ static void __init gumstix_mmc_init(void)
 #else
 static void __init gumstix_mmc_init(void)
 {
-	printk(KERN_INFO "Gumstix mmc disabled\n");
+	pr_debug("Gumstix mmc disabled\n");
 }
 #endif
 
-#ifdef CONFIG_USB_GADGET_PXA2XX
+#ifdef CONFIG_USB_GADGET_PXA25X
 static struct pxa2xx_udc_mach_info gumstix_udc_info __initdata = {
 	.gpio_vbus		= GPIO_GUMSTIX_USB_GPIOn,
 	.gpio_pullup		= GPIO_GUMSTIX_USB_GPIOx,
@@ -126,12 +117,87 @@ static void __init gumstix_udc_init(void)
 #else
 static void gumstix_udc_init(void)
 {
-	printk(KERN_INFO "Gumstix udc is disabled\n");
+	pr_debug("Gumstix udc is disabled\n");
 }
 #endif
 
+#ifdef CONFIG_BT
+/* Normally, the bootloader would have enabled this 32kHz clock but many
+** boards still have u-boot 1.1.4 so we check if it has been turned on and
+** if not, we turn it on with a warning message. */
+static void gumstix_setup_bt_clock(void)
+{
+	int timeout = 500;
+
+	if (!(OSCC & OSCC_OOK))
+		pr_warning("32kHz clock was not on. Bootloader may need to "
+				"be updated\n");
+	else
+		return;
+
+	OSCC |= OSCC_OON;
+	do {
+		if (OSCC & OSCC_OOK)
+			break;
+		udelay(1);
+	} while (--timeout);
+	if (!timeout)
+		pr_err("Failed to start 32kHz clock\n");
+}
+
+static void __init gumstix_bluetooth_init(void)
+{
+	int err;
+
+	gumstix_setup_bt_clock();
+
+	err = gpio_request(GPIO_GUMSTIX_BTRESET, "BTRST");
+	if (err) {
+		pr_err("gumstix: failed request gpio for bluetooth reset\n");
+		return;
+	}
+
+	err = gpio_direction_output(GPIO_GUMSTIX_BTRESET, 1);
+	if (err) {
+		pr_err("gumstix: can't reset bluetooth\n");
+		return;
+	}
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 0);
+	udelay(100);
+	gpio_set_value(GPIO_GUMSTIX_BTRESET, 1);
+}
+#else
+static void gumstix_bluetooth_init(void)
+{
+	pr_debug("Gumstix Bluetooth is disabled\n");
+}
+#endif
+
+static unsigned long gumstix_pin_config[] __initdata = {
+	GPIO12_32KHz,
+	/* BTUART */
+	GPIO42_HWUART_RXD,
+	GPIO43_HWUART_TXD,
+	GPIO44_HWUART_CTS,
+	GPIO45_HWUART_RTS,
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO53_MMC_CLK,
+	GPIO8_MMC_CS0,
+	/* these are used by AM200EPD */
+	GPIO51_GPIO,
+	GPIO49_GPIO,
+	GPIO48_GPIO,
+	GPIO32_GPIO,
+	GPIO17_GPIO,
+	GPIO16_GPIO,
+};
+
 static void __init gumstix_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
+
+	gumstix_bluetooth_init();
 	gumstix_udc_init();
 	gumstix_mmc_init();
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index 2637633..013b15b 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -25,18 +25,18 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/idp.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/bitfield.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/idp.h>
+#include <mach/pxafb.h>
+#include <mach/bitfield.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -46,6 +46,47 @@
  * - Ethernet interrupt
  */
 
+static unsigned long idp_pin_config[] __initdata = {
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* BTUART */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* STUART */
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* Ethernet */
+	GPIO33_nCS_5,	/* Ethernet CS */
+	GPIO4_GPIO,	/* Ethernet IRQ */
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= (IDP_ETH_PHYS + 0x300),
@@ -121,44 +162,28 @@ static struct pxafb_mach_info sharp_lm8v31 = {
 	.num_modes      = 1,
 	.cmap_inverse	= 0,
 	.cmap_static	= 0,
-	.lccr0		= LCCR0_SDS,
-	.lccr3		= LCCR3_PCP | LCCR3_Acb(255),
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL |
+			  LCD_AC_BIAS_FREQ(255),
 	.pxafb_backlight_power = &idp_backlight_power,
 	.pxafb_lcd_power = &idp_lcd_power
 };
 
-static int idp_mci_init(struct device *dev, irq_handler_t idp_detect_int, void *data)
-{
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-
-	return 0;
-}
-
 static struct pxamci_platform_data idp_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= idp_mci_init,
 };
 
 static void __init idp_init(void)
 {
 	printk("idp_init()\n");
 
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&idp_mci_platform_data);
 }
 
-static void __init idp_init_irq(void)
-{
-
-	pxa25x_init_irq();
-
-	set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE);
-}
-
 static struct map_desc idp_io_desc[] __initdata = {
   	{
 		.virtual	=  IDP_COREVOLT_VIRT,
@@ -177,15 +202,6 @@ static void __init idp_map_io(void)
 {
 	pxa_map_io();
 	iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc));
-
-	// serial ports 2 & 3
-	pxa_gpio_mode(GPIO42_BTRXD_MD);
-	pxa_gpio_mode(GPIO43_BTTXD_MD);
-	pxa_gpio_mode(GPIO44_BTCTS_MD);
-	pxa_gpio_mode(GPIO45_BTRTS_MD);
-	pxa_gpio_mode(GPIO46_STRXD_MD);
-	pxa_gpio_mode(GPIO47_STTXD_MD);
-
 }
 
 
@@ -194,7 +210,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP")
 	.phys_io	= 0x40000000,
 	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
 	.map_io		= idp_map_io,
-	.init_irq	= idp_init_irq,
+	.init_irq	= pxa25x_init_irq,
 	.timer		= &pxa_timer,
 	.init_machine	= idp_init,
 MACHINE_END
diff --git a/arch/arm/mach-pxa/include/mach/audio.h b/arch/arm/mach-pxa/include/mach/audio.h
new file mode 100644
index 0000000..f82f96d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/audio.h
@@ -0,0 +1,17 @@
+#ifndef __ASM_ARCH_AUDIO_H__
+#define __ASM_ARCH_AUDIO_H__
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+
+typedef struct {
+	int (*startup)(struct snd_pcm_substream *, void *);
+	void (*shutdown)(struct snd_pcm_substream *, void *);
+	void (*suspend)(void *);
+	void (*resume)(void *);
+	void *priv;
+} pxa2xx_audio_ops_t;
+
+extern void pxa_set_ac97_info(pxa2xx_audio_ops_t *ops);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/bitfield.h b/arch/arm/mach-pxa/include/mach/bitfield.h
new file mode 100644
index 0000000..f1f0e33
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/bitfield.h
@@ -0,0 +1,113 @@
+/*
+ *	FILE    	bitfield.h
+ *
+ *	Version 	1.1
+ *	Author  	Copyright (c) Marc A. Viredaz, 1998
+ *	        	DEC Western Research Laboratory, Palo Alto, CA
+ *	Date    	April 1998 (April 1997)
+ *	System  	Advanced RISC Machine (ARM)
+ *	Language	C or ARM Assembly
+ *	Purpose 	Definition of macros to operate on bit fields.
+ */
+
+
+
+#ifndef __BITFIELD_H
+#define __BITFIELD_H
+
+#ifndef __ASSEMBLY__
+#define UData(Data)	((unsigned long) (Data))
+#else
+#define UData(Data)	(Data)
+#endif
+
+
+/*
+ * MACRO: Fld
+ *
+ * Purpose
+ *    The macro "Fld" encodes a bit field, given its size and its shift value
+ *    with respect to bit 0.
+ *
+ * Note
+ *    A more intuitive way to encode bit fields would have been to use their
+ *    mask. However, extracting size and shift value information from a bit
+ *    field's mask is cumbersome and might break the assembler (255-character
+ *    line-size limit).
+ *
+ * Input
+ *    Size      	Size of the bit field, in number of bits.
+ *    Shft      	Shift value of the bit field with respect to bit 0.
+ *
+ * Output
+ *    Fld       	Encoded bit field.
+ */
+
+#define Fld(Size, Shft)	(((Size) << 16) + (Shft))
+
+
+/*
+ * MACROS: FSize, FShft, FMsk, FAlnMsk, F1stBit
+ *
+ * Purpose
+ *    The macros "FSize", "FShft", "FMsk", "FAlnMsk", and "F1stBit" return
+ *    the size, shift value, mask, aligned mask, and first bit of a
+ *    bit field.
+ *
+ * Input
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FSize     	Size of the bit field, in number of bits.
+ *    FShft     	Shift value of the bit field with respect to bit 0.
+ *    FMsk      	Mask for the bit field.
+ *    FAlnMsk   	Mask for the bit field, aligned on bit 0.
+ *    F1stBit   	First bit of the bit field.
+ */
+
+#define FSize(Field)	((Field) >> 16)
+#define FShft(Field)	((Field) & 0x0000FFFF)
+#define FMsk(Field)	(((UData (1) << FSize (Field)) - 1) << FShft (Field))
+#define FAlnMsk(Field)	((UData (1) << FSize (Field)) - 1)
+#define F1stBit(Field)	(UData (1) << FShft (Field))
+
+
+/*
+ * MACRO: FInsrt
+ *
+ * Purpose
+ *    The macro "FInsrt" inserts a value into a bit field by shifting the
+ *    former appropriately.
+ *
+ * Input
+ *    Value     	Bit-field value.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FInsrt    	Bit-field value positioned appropriately.
+ */
+
+#define FInsrt(Value, Field) \
+                	(UData (Value) << FShft (Field))
+
+
+/*
+ * MACRO: FExtr
+ *
+ * Purpose
+ *    The macro "FExtr" extracts the value of a bit field by masking and
+ *    shifting it appropriately.
+ *
+ * Input
+ *    Data      	Data containing the bit-field to be extracted.
+ *    Field     	Encoded bit field (using the macro "Fld").
+ *
+ * Output
+ *    FExtr     	Bit-field value.
+ */
+
+#define FExtr(Data, Field) \
+                	((UData (Data) >> FShft (Field)) & FAlnMsk (Field))
+
+
+#endif /* __BITFIELD_H */
diff --git a/arch/arm/mach-pxa/include/mach/camera.h b/arch/arm/mach-pxa/include/mach/camera.h
new file mode 100644
index 0000000..31abe6d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/camera.h
@@ -0,0 +1,46 @@
+/*
+    camera.h - PXA camera driver header file
+
+    Copyright (C) 2003, Intel Corporation
+    Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define PXA_CAMERA_MASTER	1
+#define PXA_CAMERA_DATAWIDTH_4	2
+#define PXA_CAMERA_DATAWIDTH_5	4
+#define PXA_CAMERA_DATAWIDTH_8	8
+#define PXA_CAMERA_DATAWIDTH_9	0x10
+#define PXA_CAMERA_DATAWIDTH_10	0x20
+#define PXA_CAMERA_PCLK_EN	0x40
+#define PXA_CAMERA_MCLK_EN	0x80
+#define PXA_CAMERA_PCP		0x100
+#define PXA_CAMERA_HSP		0x200
+#define PXA_CAMERA_VSP		0x400
+
+struct pxacamera_platform_data {
+	int (*init)(struct device *);
+
+	unsigned long flags;
+	unsigned long mclk_10khz;
+};
+
+extern void pxa_set_camera_info(struct pxacamera_platform_data *);
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h
new file mode 100644
index 0000000..2ae373f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/colibri.h
@@ -0,0 +1,19 @@
+#ifndef _COLIBRI_H_
+#define _COLIBRI_H_
+
+/* physical memory regions */
+#define COLIBRI_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define COLIBRI_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define COLIBRI_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+/* virtual memory regions */
+#define COLIBRI_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+
+/* size of flash */
+#define COLIBRI_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000		114
+#define COLIBRI_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+
+#endif /* _COLIBRI_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h
new file mode 100644
index 0000000..585970e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/corgi.h
@@ -0,0 +1,118 @@
+/*
+ * Hardware specific definitions for SL-C7xx series of PDAs
+ *
+ * Copyright (c) 2004-2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_CORGI_H
+#define __ASM_ARCH_CORGI_H  1
+
+
+/*
+ * Corgi (Non Standard) GPIO Definitions
+ */
+#define CORGI_GPIO_KEY_INT			(0)	/* Keyboard Interrupt */
+#define CORGI_GPIO_AC_IN			(1) /* Charger Detection */
+#define CORGI_GPIO_WAKEUP			(3) /* System wakeup notification? */
+#define CORGI_GPIO_AK_INT			(4)	/* Headphone Jack Control Interrupt */
+#define CORGI_GPIO_TP_INT			(5)	/* Touch Panel Interrupt */
+#define CORGI_GPIO_nSD_WP			(7) /* SD Write Protect? */
+#define CORGI_GPIO_nSD_DETECT		(9) /* MMC/SD Card Detect */
+#define CORGI_GPIO_nSD_INT			(10) /* SD Interrupt for SDIO? */
+#define CORGI_GPIO_MAIN_BAT_LOW		(11) /* Main Battery Low Notification */
+#define CORGI_GPIO_BAT_COVER		(11) /* Battery Cover Detect */
+#define CORGI_GPIO_LED_ORANGE		(13) /* Orange LED Control */
+#define CORGI_GPIO_CF_CD			(14) /* Compact Flash Card Detect */
+#define CORGI_GPIO_CHRG_FULL		(16) /* Charging Complete Notification */
+#define CORGI_GPIO_CF_IRQ			(17) /* Compact Flash Interrupt */
+#define CORGI_GPIO_LCDCON_CS		(19) /* LCD Control Chip Select */
+#define CORGI_GPIO_MAX1111_CS		(20) /* MAX1111 Chip Select */
+#define CORGI_GPIO_ADC_TEMP_ON		(21) /* Select battery voltage or temperature */
+#define CORGI_GPIO_IR_ON			(22) /* Enable IR Transciever */
+#define CORGI_GPIO_ADS7846_CS		(24) /* ADS7846 Chip Select */
+#define CORGI_GPIO_SD_PWR			(33) /* MMC/SD Power */
+#define CORGI_GPIO_CHRG_ON			(38) /* Enable battery Charging */
+#define CORGI_GPIO_DISCHARGE_ON		(42) /* Enable battery Discharge */
+#define CORGI_GPIO_CHRG_UKN			(43) /* Unknown Charging (Bypass Control?) */
+#define CORGI_GPIO_HSYNC			(44) /* LCD HSync Pulse */
+#define CORGI_GPIO_USB_PULLUP		(45) /* USB show presence to host */
+
+
+/*
+ * Corgi Keyboard Definitions
+ */
+#define CORGI_KEY_STROBE_NUM		(12)
+#define CORGI_KEY_SENSE_NUM			(8)
+#define CORGI_GPIO_ALL_STROBE_BIT	(0x00003ffc)
+#define CORGI_GPIO_HIGH_SENSE_BIT	(0xfc000000)
+#define CORGI_GPIO_HIGH_SENSE_RSHIFT	(26)
+#define CORGI_GPIO_LOW_SENSE_BIT	(0x00000003)
+#define CORGI_GPIO_LOW_SENSE_LSHIFT	(6)
+#define CORGI_GPIO_STROBE_BIT(a)	GPIO_bit(66+(a))
+#define CORGI_GPIO_SENSE_BIT(a)		GPIO_bit(58+(a))
+#define CORGI_GAFR_ALL_STROBE_BIT	(0x0ffffff0)
+#define CORGI_GAFR_HIGH_SENSE_BIT	(0xfff00000)
+#define CORGI_GAFR_LOW_SENSE_BIT	(0x0000000f)
+#define CORGI_GPIO_KEY_SENSE(a)		(58+(a))
+#define CORGI_GPIO_KEY_STROBE(a)	(66+(a))
+
+
+/*
+ * Corgi Interrupts
+ */
+#define CORGI_IRQ_GPIO_KEY_INT		IRQ_GPIO(0)
+#define CORGI_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define CORGI_IRQ_GPIO_WAKEUP		IRQ_GPIO(3)
+#define CORGI_IRQ_GPIO_AK_INT		IRQ_GPIO(4)
+#define CORGI_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define CORGI_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define CORGI_IRQ_GPIO_nSD_INT		IRQ_GPIO(10)
+#define CORGI_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(11)
+#define CORGI_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define CORGI_IRQ_GPIO_CHRG_FULL	IRQ_GPIO(16)	/* Battery fully charged */
+#define CORGI_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define CORGI_IRQ_GPIO_KEY_SENSE(a)	IRQ_GPIO(58+(a))	/* Keyboard Sense lines */
+
+
+/*
+ * Corgi SCOOP GPIOs and Config
+ */
+#define CORGI_SCP_LED_GREEN		SCOOP_GPCR_PA11
+#define CORGI_SCP_SWA			SCOOP_GPCR_PA12  /* Hinge Switch A */
+#define CORGI_SCP_SWB			SCOOP_GPCR_PA13  /* Hinge Switch B */
+#define CORGI_SCP_MUTE_L		SCOOP_GPCR_PA14
+#define CORGI_SCP_MUTE_R		SCOOP_GPCR_PA15
+#define CORGI_SCP_AKIN_PULLUP	SCOOP_GPCR_PA16
+#define CORGI_SCP_APM_ON		SCOOP_GPCR_PA17
+#define CORGI_SCP_BACKLIGHT_CONT	SCOOP_GPCR_PA18
+#define CORGI_SCP_MIC_BIAS		SCOOP_GPCR_PA19
+
+#define CORGI_SCOOP_IO_DIR	( CORGI_SCP_LED_GREEN | CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R | \
+			CORGI_SCP_AKIN_PULLUP | CORGI_SCP_APM_ON | CORGI_SCP_BACKLIGHT_CONT | \
+			CORGI_SCP_MIC_BIAS )
+#define CORGI_SCOOP_IO_OUT	( CORGI_SCP_MUTE_L | CORGI_SCP_MUTE_R )
+
+#define CORGI_SCOOP_GPIO_BASE		(NR_BUILTIN_GPIO)
+#define CORGI_GPIO_LED_GREEN		(CORGI_SCOOP_GPIO_BASE + 0)
+#define CORGI_GPIO_SWA			(CORGI_SCOOP_GPIO_BASE + 1)  /* Hinge Switch A */
+#define CORGI_GPIO_SWB			(CORGI_SCOOP_GPIO_BASE + 2)  /* Hinge Switch B */
+#define CORGI_GPIO_MUTE_L		(CORGI_SCOOP_GPIO_BASE + 3)
+#define CORGI_GPIO_MUTE_R		(CORGI_SCOOP_GPIO_BASE + 4)
+#define CORGI_GPIO_AKIN_PULLUP		(CORGI_SCOOP_GPIO_BASE + 5)
+#define CORGI_GPIO_APM_ON		(CORGI_SCOOP_GPIO_BASE + 6)
+#define CORGI_GPIO_BACKLIGHT_CONT	(CORGI_SCOOP_GPIO_BASE + 7)
+#define CORGI_GPIO_MIC_BIAS		(CORGI_SCOOP_GPIO_BASE + 8)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device corgiscoop_device;
+
+#endif /* __ASM_ARCH_CORGI_H  */
+
diff --git a/arch/arm/mach-pxa/include/mach/debug-macro.S b/arch/arm/mach-pxa/include/mach/debug-macro.S
new file mode 100644
index 0000000..55d6a17
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/debug-macro.S
@@ -0,0 +1,25 @@
+/* arch/arm/mach-pxa/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include "hardware.h"
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0x40000000		@ physical
+		movne	\rx, #io_p2v(0x40000000)	@ virtual
+		orr	\rx, \rx, #0x00100000
+		.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-pxa/include/mach/dma.h b/arch/arm/mach-pxa/include/mach/dma.h
new file mode 100644
index 0000000..955bfe6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/dma.h
@@ -0,0 +1,50 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/dma.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __ASM_ARCH_DMA_H
+#define __ASM_ARCH_DMA_H
+
+/*
+ * Descriptor structure for PXA's DMA engine
+ * Note: this structure must always be aligned to a 16-byte boundary.
+ */
+
+typedef struct pxa_dma_desc {
+	volatile u32 ddadr;	/* Points to the next descriptor + flags */
+	volatile u32 dsadr;	/* DSADR value for the current transfer */
+	volatile u32 dtadr;	/* DTADR value for the current transfer */
+	volatile u32 dcmd;	/* DCMD value for the current transfer */
+} pxa_dma_desc;
+
+typedef enum {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+} pxa_dma_prio;
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define HAVE_ARCH_PCI_SET_DMA_MASK	1
+#endif
+
+/*
+ * DMA registration
+ */
+
+int __init pxa_init_dma(int num_ch);
+
+int pxa_request_dma (char *name,
+			 pxa_dma_prio prio,
+			 void (*irq_handler)(int, void *),
+			 void *data);
+
+void pxa_free_dma (int dma_ch);
+
+#endif /* _ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-pxa/include/mach/entry-macro.S b/arch/arm/mach-pxa/include/mach/entry-macro.S
new file mode 100644
index 0000000..f6b4bf3
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/entry-macro.S
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-pxa/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for PXA-based platforms
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		mrc	p15, 0, \tmp, c0, c0, 0		@ CPUID
+		mov	\tmp, \tmp, lsr #13
+		and	\tmp, \tmp, #0x7		@ Core G
+		cmp	\tmp, #1
+		bhi	1004f
+
+		mov	\base, #io_p2v(0x40000000)	@ IIR Ctl = 0x40d00000
+		add	\base, \base, #0x00d00000
+		ldr	\irqstat, [\base, #0]		@ ICIP
+		ldr	\irqnr, [\base, #4]		@ ICMR
+		b	1002f
+
+1004:
+		mrc	p6, 0, \irqstat, c6, c0, 0	@ ICIP2
+		mrc	p6, 0, \irqnr, c7, c0, 0	@ ICMR2
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1003f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #31
+		add	\irqnr, \irqnr, #(32 + PXA_IRQ(0))
+		b	1001f
+1003:
+		mrc	p6, 0, \irqstat, c0, c0, 0	@ ICIP
+		mrc	p6, 0, \irqnr, c1, c0, 0	@ ICMR
+1002:
+		ands	\irqnr, \irqstat, \irqnr
+		beq	1001f
+		rsb	\irqstat, \irqnr, #0
+		and	\irqstat, \irqstat, \irqnr
+		clz	\irqnr, \irqstat
+		rsb	\irqnr, \irqnr, #(31 + PXA_IRQ(0))
+1001:
+		.endm
diff --git a/arch/arm/mach-pxa/include/mach/eseries-gpio.h b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
new file mode 100644
index 0000000..4c90b13
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-gpio.h
@@ -0,0 +1,50 @@
+/*
+ *  eseries-gpio.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+/* e-series power button */
+#define GPIO_ESERIES_POWERBTN     0
+
+/* UDC GPIO definitions */
+#define GPIO_E7XX_USB_DISC       13
+#define GPIO_E7XX_USB_PULLUP      3
+
+#define GPIO_E800_USB_DISC        4
+#define GPIO_E800_USB_PULLUP     84
+
+/* e740 PCMCIA GPIO definitions */
+/* Note: PWR1 seems to be inverted */
+#define GPIO_E740_PCMCIA_CD0      8
+#define GPIO_E740_PCMCIA_CD1     44
+#define GPIO_E740_PCMCIA_RDY0    11
+#define GPIO_E740_PCMCIA_RDY1     6
+#define GPIO_E740_PCMCIA_RST0    27
+#define GPIO_E740_PCMCIA_RST1    24
+#define GPIO_E740_PCMCIA_PWR0    20
+#define GPIO_E740_PCMCIA_PWR1    23
+
+/* e750 PCMCIA GPIO definitions */
+#define GPIO_E750_PCMCIA_CD0      8
+#define GPIO_E750_PCMCIA_RDY0    12
+#define GPIO_E750_PCMCIA_RST0    27
+#define GPIO_E750_PCMCIA_PWR0    20
+
+/* e800 PCMCIA GPIO definitions */
+#define GPIO_E800_PCMCIA_RST0    69
+#define GPIO_E800_PCMCIA_RST1    72
+#define GPIO_E800_PCMCIA_PWR0    20
+#define GPIO_E800_PCMCIA_PWR1    73
+
+/* e7xx IrDA power control */
+#define GPIO_E7XX_IR_ON          38
+
+/* ASIC related GPIOs */
+#define GPIO_ESERIES_TMIO_IRQ        5
+#define GPIO_E800_ANGELX_IRQ      8
diff --git a/arch/arm/mach-pxa/include/mach/eseries-irq.h b/arch/arm/mach-pxa/include/mach/eseries-irq.h
new file mode 100644
index 0000000..f2a93d5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/eseries-irq.h
@@ -0,0 +1,27 @@
+/*
+ *  eseries-irq.h
+ *
+ *  Copyright (C) Ian Molton <spyro@f2s.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#define ANGELX_IRQ_BASE (IRQ_BOARD_START+8)
+#define IRQ_ANGELX(n) (ANGELX_IRQ_BASE + (n))
+
+#define ANGELX_RDY0_IRQ IRQ_ANGELX(0)
+#define ANGELX_ST0_IRQ  IRQ_ANGELX(1)
+#define ANGELX_CD0_IRQ  IRQ_ANGELX(2)
+#define ANGELX_RDY1_IRQ IRQ_ANGELX(3)
+#define ANGELX_ST1_IRQ  IRQ_ANGELX(4)
+#define ANGELX_CD1_IRQ  IRQ_ANGELX(5)
+
+#define TMIO_IRQ_BASE (IRQ_BOARD_START+0)
+#define IRQ_TMIO(n) (TMIO_IRQ_BASE + (n))
+
+#define TMIO_SD_IRQ     IRQ_TMIO(1)
+#define TMIO_USB_IRQ    IRQ_TMIO(2)
+
diff --git a/arch/arm/mach-pxa/include/mach/gpio.h b/arch/arm/mach-pxa/include/mach/gpio.h
new file mode 100644
index 0000000..2c538d8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gpio.h
@@ -0,0 +1,65 @@
+/*
+ * arch/arm/mach-pxa/include/mach/gpio.h
+ *
+ * PXA GPIO wrappers for arch-neutral GPIO calls
+ *
+ * Written by Philipp Zabel <philipp.zabel@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __ASM_ARCH_PXA_GPIO_H
+#define __ASM_ARCH_PXA_GPIO_H
+
+#include <mach/pxa-regs.h>
+#include <asm/irq.h>
+#include <mach/hardware.h>
+
+#include <asm-generic/gpio.h>
+
+
+/* NOTE: some PXAs have fewer on-chip GPIOs (like PXA255, with 85).
+ * Those cases currently cause holes in the GPIO number space.
+ */
+#define NR_BUILTIN_GPIO 128
+
+static inline int gpio_get_value(unsigned gpio)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO))
+		return GPLR(gpio) & GPIO_bit(gpio);
+	else
+		return __gpio_get_value(gpio);
+}
+
+static inline void gpio_set_value(unsigned gpio, int value)
+{
+	if (__builtin_constant_p(gpio) && (gpio < NR_BUILTIN_GPIO)) {
+		if (value)
+			GPSR(gpio) = GPIO_bit(gpio);
+		else
+			GPCR(gpio) = GPIO_bit(gpio);
+	} else {
+		__gpio_set_value(gpio, value);
+	}
+}
+
+#define gpio_cansleep __gpio_cansleep
+
+#define gpio_to_irq(gpio)	IRQ_GPIO(gpio)
+#define irq_to_gpio(irq)	IRQ_TO_GPIO(irq)
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/gumstix.h b/arch/arm/mach-pxa/include/mach/gumstix.h
new file mode 100644
index 0000000..42ee195
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/gumstix.h
@@ -0,0 +1,96 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/gumstix.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+/* BTRESET - Reset line to Bluetooth module, active low signal. */
+#define GPIO_GUMSTIX_BTRESET          7
+#define GPIO_GUMSTIX_BTRESET_MD		(GPIO_GUMSTIX_BTRESET | GPIO_OUT)
+
+
+/*
+GPIOn - Input from MAX823 (or equiv), normalizing USB +5V into a clean
+interrupt signal for determining cable presence. On the original gumstix,
+this is GPIO81, and GPIO83 needs to be defined as well. On the gumstix F,
+this moves to GPIO17 and GPIO37. */
+
+/* GPIOx - Connects to USB D+ and used as a pull-up after GPIOn
+has detected a cable insertion; driven low otherwise. */
+
+#ifdef CONFIG_ARCH_GUMSTIX_ORIG
+
+#define GPIO_GUMSTIX_USB_GPIOn		81
+#define GPIO_GUMSTIX_USB_GPIOx		83
+
+#else
+
+#define GPIO_GUMSTIX_USB_GPIOn		35
+#define GPIO_GUMSTIX_USB_GPIOx		41
+
+#endif
+
+/* usb state change */
+#define GUMSTIX_USB_INTR_IRQ		IRQ_GPIO(GPIO_GUMSTIX_USB_GPIOn)
+
+#define GPIO_GUMSTIX_USB_GPIOn_MD	(GPIO_GUMSTIX_USB_GPIOn | GPIO_IN)
+#define GPIO_GUMSTIX_USB_GPIOx_CON_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_OUT)
+#define GPIO_GUMSTIX_USB_GPIOx_DIS_MD	(GPIO_GUMSTIX_USB_GPIOx | GPIO_IN)
+
+/*
+ * SD/MMC definitions
+ */
+#define GUMSTIX_GPIO_nSD_WP		22 /* SD Write Protect */
+#define GUMSTIX_GPIO_nSD_DETECT		11 /* MMC/SD Card Detect */
+#define GUMSTIX_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(GUMSTIX_GPIO_nSD_DETECT)
+
+/*
+ * SMC Ethernet definitions
+ * ETH_RST provides a hardware reset line to the ethernet chip
+ * ETH is the IRQ line in from the ethernet chip to the PXA
+ */
+#define GPIO_GUMSTIX_ETH0_RST		80
+#define GPIO_GUMSTIX_ETH0_RST_MD	(GPIO_GUMSTIX_ETH0_RST | GPIO_OUT)
+#define GPIO_GUMSTIX_ETH1_RST		52
+#define GPIO_GUMSTIX_ETH1_RST_MD	(GPIO_GUMSTIX_ETH1_RST | GPIO_OUT)
+
+#define GPIO_GUMSTIX_ETH0		36
+#define GPIO_GUMSTIX_ETH0_MD		(GPIO_GUMSTIX_ETH0 | GPIO_IN)
+#define GUMSTIX_ETH0_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH0)
+#define GPIO_GUMSTIX_ETH1		27
+#define GPIO_GUMSTIX_ETH1_MD		(GPIO_GUMSTIX_ETH1 | GPIO_IN)
+#define GUMSTIX_ETH1_IRQ		IRQ_GPIO(GPIO_GUMSTIX_ETH1)
+
+
+/* CF reset line */
+#define GPIO8_RESET			8
+
+/* CF slot 0 */
+#define GPIO4_nBVD1			4
+#define GPIO4_nSTSCHG			GPIO4_nBVD1
+#define GPIO11_nCD			11
+#define GPIO26_PRDY_nBSY		26
+#define GUMSTIX_S0_nSTSCHG_IRQ		IRQ_GPIO(GPIO4_nSTSCHG)
+#define GUMSTIX_S0_nCD_IRQ		IRQ_GPIO(GPIO11_nCD)
+#define GUMSTIX_S0_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO26_PRDY_nBSY)
+
+/* CF slot 1 */
+#define GPIO18_nBVD1			18
+#define GPIO18_nSTSCHG			GPIO18_nBVD1
+#define GPIO36_nCD			36
+#define GPIO27_PRDY_nBSY		27
+#define GUMSTIX_S1_nSTSCHG_IRQ		IRQ_GPIO(GPIO18_nSTSCHG)
+#define GUMSTIX_S1_nCD_IRQ		IRQ_GPIO(GPIO36_nCD)
+#define GUMSTIX_S1_PRDY_nBSY_IRQ	IRQ_GPIO(GPIO27_PRDY_nBSY)
+
+/* CF GPIO line modes */
+#define GPIO4_nSTSCHG_MD		(GPIO4_nSTSCHG | GPIO_IN)
+#define GPIO8_RESET_MD			(GPIO8_RESET | GPIO_OUT)
+#define GPIO11_nCD_MD			(GPIO11_nCD | GPIO_IN)
+#define GPIO18_nSTSCHG_MD		(GPIO18_nSTSCHG | GPIO_IN)
+#define GPIO26_PRDY_nBSY_MD		(GPIO26_PRDY_nBSY | GPIO_IN)
+#define GPIO27_PRDY_nBSY_MD		(GPIO27_PRDY_nBSY | GPIO_IN)
+#define GPIO36_nCD_MD			(GPIO36_nCD | GPIO_IN)
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
new file mode 100644
index 0000000..a582a6d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -0,0 +1,290 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/hardware.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+/*
+ * We requires absolute addresses.
+ */
+#define PCIO_BASE		0
+
+/*
+ * Workarounds for at least 2 errata so far require this.
+ * The mapping is set in mach-pxa/generic.c.
+ */
+#define UNCACHED_PHYS_0		0xff000000
+#define UNCACHED_ADDR		UNCACHED_PHYS_0
+
+/*
+ * Intel PXA2xx internal register mapping:
+ *
+ * 0x40000000 - 0x41ffffff <--> 0xf2000000 - 0xf3ffffff
+ * 0x44000000 - 0x45ffffff <--> 0xf4000000 - 0xf5ffffff
+ * 0x48000000 - 0x49ffffff <--> 0xf6000000 - 0xf7ffffff
+ * 0x4c000000 - 0x4dffffff <--> 0xf8000000 - 0xf9ffffff
+ * 0x50000000 - 0x51ffffff <--> 0xfa000000 - 0xfbffffff
+ * 0x54000000 - 0x55ffffff <--> 0xfc000000 - 0xfdffffff
+ * 0x58000000 - 0x59ffffff <--> 0xfe000000 - 0xffffffff
+ *
+ * Note that not all PXA2xx chips implement all those addresses, and the
+ * kernel only maps the minimum needed range of this mapping.
+ */
+#define io_p2v(x) (0xf2000000 + ((x) & 0x01ffffff) + (((x) & 0x1c000000) >> 1))
+#define io_v2p(x) (0x3c000000 + ((x) & 0x01ffffff) + (((x) & 0x0e000000) << 1))
+
+#ifndef __ASSEMBLY__
+
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
+
+/* With indexed regs we don't want to feed the index through io_p2v()
+   especially if it is a variable, otherwise horrible code will result. */
+# define __REG2(x,y)	\
+	(*(volatile u32 *)((u32)&__REG(x) + (y)))
+
+# define __PREG(x)	(io_v2p((u32)&(x)))
+
+#else
+
+# define __REG(x)	io_p2v(x)
+# define __PREG(x)	io_v2p(x)
+
+#endif
+
+#ifndef __ASSEMBLY__
+
+#include <asm/cputype.h>
+
+/*
+ *   CPU     Stepping     CPU_ID         JTAG_ID
+ *
+ *  PXA210	B0	0x69052922	0x2926C013
+ *  PXA210	B1	0x69052923	0x3926C013
+ *  PXA210	B2	0x69052924	0x4926C013
+ *  PXA210	C0	0x69052D25	0x5926C013
+ *
+ *  PXA250	A0	0x69052100	0x09264013
+ *  PXA250	A1	0x69052101	0x19264013
+ *  PXA250	B0	0x69052902	0x29264013
+ *  PXA250	B1	0x69052903	0x39264013
+ *  PXA250	B2	0x69052904	0x49264013
+ *  PXA250	C0	0x69052D05	0x59264013
+ *
+ *  PXA255	A0	0x69052D06	0x69264013
+ *
+ *  PXA26x	A0	0x69052903	0x39264013
+ *  PXA26x	B0	0x69052D05	0x59264013
+ *
+ *  PXA27x	A0	0x69054110	0x09265013
+ *  PXA27x	A1	0x69054111	0x19265013
+ *  PXA27x	B0	0x69054112	0x29265013
+ *  PXA27x	B1	0x69054113	0x39265013
+ *  PXA27x	C0	0x69054114	0x49265013
+ *  PXA27x	C5	0x69054117	0x79265013
+ *
+ *  PXA30x	A0	0x69056880	0x0E648013
+ *  PXA30x	A1	0x69056881	0x1E648013
+ *  PXA31x	A0	0x69056890	0x0E649013
+ *  PXA31x	A1	0x69056891	0x1E649013
+ *  PXA31x	A2	0x69056892	0x2E649013
+ *  PXA32x	B1	0x69056825	0x5E642013
+ *  PXA32x	B2	0x69056826	0x6E642013
+ *
+ *  PXA930	B0	0x69056835	0x5E643013
+ *  PXA930	B1	0x69056837	0x7E643013
+ *  PXA930	B2	0x69056838	0x8E643013
+ */
+#ifdef CONFIG_PXA25x
+#define __cpu_is_pxa210(id)				\
+	({						\
+		unsigned int _id = (id) & 0xf3f0;	\
+		_id == 0x2120;				\
+	})
+
+#define __cpu_is_pxa250(id)				\
+	({						\
+		unsigned int _id = (id) & 0xf3ff;	\
+		_id <= 0x2105;				\
+	})
+
+#define __cpu_is_pxa255(id)				\
+	({						\
+		unsigned int _id = (id) & 0xffff;	\
+		_id == 0x2d06;				\
+	})
+
+#define __cpu_is_pxa25x(id)				\
+	({						\
+		unsigned int _id = (id) & 0xf300;	\
+		_id == 0x2100;				\
+	})
+#else
+#define __cpu_is_pxa210(id)	(0)
+#define __cpu_is_pxa250(id)	(0)
+#define __cpu_is_pxa255(id)	(0)
+#define __cpu_is_pxa25x(id)	(0)
+#endif
+
+#ifdef CONFIG_PXA27x
+#define __cpu_is_pxa27x(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x411;				\
+	})
+#else
+#define __cpu_is_pxa27x(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA300
+#define __cpu_is_pxa300(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x688;				\
+	 })
+#else
+#define __cpu_is_pxa300(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA310
+#define __cpu_is_pxa310(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x689;				\
+	 })
+#else
+#define __cpu_is_pxa310(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+#define __cpu_is_pxa320(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x603 || _id == 0x682;		\
+	 })
+#else
+#define __cpu_is_pxa320(id)	(0)
+#endif
+
+#ifdef CONFIG_CPU_PXA930
+#define __cpu_is_pxa930(id)				\
+	({						\
+		unsigned int _id = (id) >> 4 & 0xfff;	\
+		_id == 0x683;		\
+	 })
+#else
+#define __cpu_is_pxa930(id)	(0)
+#endif
+
+#define cpu_is_pxa210()					\
+	({						\
+		__cpu_is_pxa210(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa250()					\
+	({						\
+		__cpu_is_pxa250(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa255()                                 \
+	({                                              \
+		__cpu_is_pxa255(read_cpuid_id());       \
+	})
+
+#define cpu_is_pxa25x()					\
+	({						\
+		__cpu_is_pxa25x(read_cpuid_id());	\
+	})
+
+extern int cpu_is_pxa26x(void);
+
+#define cpu_is_pxa27x()					\
+	({						\
+		__cpu_is_pxa27x(read_cpuid_id());	\
+	})
+
+#define cpu_is_pxa300()					\
+	({						\
+		__cpu_is_pxa300(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa310()					\
+	({						\
+		__cpu_is_pxa310(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa320()					\
+	({						\
+		__cpu_is_pxa320(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa930()					\
+	({						\
+		unsigned int id = read_cpuid(CPUID_ID);	\
+		__cpu_is_pxa930(id);			\
+	 })
+
+/*
+ * CPUID Core Generation Bit
+ * <= 0x2 for pxa21x/pxa25x/pxa26x/pxa27x
+ * == 0x3 for pxa300/pxa310/pxa320
+ */
+#define __cpu_is_pxa2xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id <= 0x2;				\
+	 })
+
+#define __cpu_is_pxa3xx(id)				\
+	({						\
+		unsigned int _id = (id) >> 13 & 0x7;	\
+		_id == 0x3;				\
+	 })
+
+#define cpu_is_pxa2xx()					\
+	({						\
+		__cpu_is_pxa2xx(read_cpuid_id());	\
+	 })
+
+#define cpu_is_pxa3xx()					\
+	({						\
+		__cpu_is_pxa3xx(read_cpuid_id());	\
+	 })
+
+/*
+ * Handy routine to set GPIO alternate functions
+ */
+extern int pxa_gpio_mode( int gpio_mode );
+
+/*
+ * Return GPIO level, nonzero means high, zero is low
+ */
+extern int pxa_gpio_get_value(unsigned gpio);
+
+/*
+ * Set output GPIO level
+ */
+extern void pxa_gpio_set_value(unsigned gpio, int value);
+
+/*
+ * return current memory and LCD clock frequency in units of 10kHz
+ */
+extern unsigned int get_memclk_frequency_10khz(void);
+
+#endif
+
+#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+#define PCIBIOS_MIN_IO		0
+#define PCIBIOS_MIN_MEM		0
+#define pcibios_assign_all_busses()	1
+#endif
+
+#endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-pxa/include/mach/i2c.h b/arch/arm/mach-pxa/include/mach/i2c.h
new file mode 100644
index 0000000..1a9f65e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/i2c.h
@@ -0,0 +1,82 @@
+/*
+ *  i2c_pxa.h
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef _I2C_PXA_H_
+#define _I2C_PXA_H_
+
+#if 0
+#define DEF_TIMEOUT             3
+#else
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+*/
+#define DEF_TIMEOUT             32
+#endif
+
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+*
+*  15. FM       0 (100 Khz operation)
+*  14. UR       0 (No unit reset)
+*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
+*                                       matching its slave address)
+*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
+*                                       in master mode)
+*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
+*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
+*  9.  IRFIE    1 (Enable interrupts from full buffer received)
+*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
+*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
+*  6.  IUE      0 (Disable unit until we change settings)
+*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
+*  4.  MA       0 (Only send stop with the ICR stop bit)
+*  3.  TB       0 (We are not transmitting a byte initially)
+*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
+*  1.  STOP     0 (Do not send a STOP)
+*  0.  START    0 (Do not send a START)
+*
+*/
+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+/* I2C status register init values
+ *
+ * 10. BED      1 (Clear bus error detected)
+ * 9.  SAD      1 (Clear slave address detected)
+ * 7.  IRF      1 (Clear IDBR Receive Full)
+ * 6.  ITE      1 (Clear IDBR Transmit Empty)
+ * 5.  ALD      1 (Clear Arbitration Loss Detected)
+ * 4.  SSD      1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT	0x7FF  /* status register init */
+
+struct i2c_slave_client;
+
+struct i2c_pxa_platform_data {
+	unsigned int		slave_addr;
+	struct i2c_slave_client	*slave;
+	unsigned int		class;
+	unsigned int		use_pio :1;
+	unsigned int		fast_mode :1;
+};
+
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+
+#ifdef CONFIG_PXA27x
+extern void pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#ifdef CONFIG_PXA3xx
+extern void pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/idp.h b/arch/arm/mach-pxa/include/mach/idp.h
new file mode 100644
index 0000000..5eff96f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/idp.h
@@ -0,0 +1,199 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/idp.h
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Copyright (c) 2001 Cliff Brake, Accelent Systems Inc.
+ *
+ * 2001-09-13: Cliff Brake <cbrake@accelent.com>
+ *             Initial code
+ *
+ * 2005-02-15: Cliff Brake <cliff.brake@gmail.com>
+ *             <http://www.vibren.com> <http://bec-systems.com>
+ *             Changes for 2.6 kernel.
+ */
+
+
+/*
+ * Note: this file must be safe to include in assembly files
+ *
+ * Support for the Vibren PXA255 IDP requires rev04 or later
+ * IDP hardware.
+ */
+
+
+#define IDP_FLASH_PHYS		(PXA_CS0_PHYS)
+#define IDP_ALT_FLASH_PHYS	(PXA_CS1_PHYS)
+#define IDP_MEDIAQ_PHYS		(PXA_CS3_PHYS)
+#define IDP_IDE_PHYS		(PXA_CS5_PHYS + 0x03000000)
+#define IDP_ETH_PHYS		(PXA_CS5_PHYS + 0x03400000)
+#define IDP_COREVOLT_PHYS	(PXA_CS5_PHYS + 0x03800000)
+#define IDP_CPLD_PHYS		(PXA_CS5_PHYS + 0x03C00000)
+
+
+/*
+ * virtual memory map
+ */
+
+#define IDP_COREVOLT_VIRT	(0xf0000000)
+#define IDP_COREVOLT_SIZE	(1*1024*1024)
+
+#define IDP_CPLD_VIRT		(IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE)
+#define IDP_CPLD_SIZE		(1*1024*1024)
+
+#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000
+#error Your custom IO space is getting a bit large !!
+#endif
+
+#define CPLD_P2V(x)		((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT)
+#define CPLD_V2P(x)		((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __CPLD_REG(x)		(*((volatile unsigned long *)CPLD_P2V(x)))
+#else
+#  define __CPLD_REG(x)		CPLD_P2V(x)
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_VIRT) */
+
+#define _IDP_CPLD_REV			(IDP_CPLD_PHYS + 0x00)
+#define _IDP_CPLD_PERIPH_PWR		(IDP_CPLD_PHYS + 0x04)
+#define _IDP_CPLD_LED_CONTROL		(IDP_CPLD_PHYS + 0x08)
+#define _IDP_CPLD_KB_COL_HIGH		(IDP_CPLD_PHYS + 0x0C)
+#define _IDP_CPLD_KB_COL_LOW		(IDP_CPLD_PHYS + 0x10)
+#define _IDP_CPLD_PCCARD_EN		(IDP_CPLD_PHYS + 0x14)
+#define _IDP_CPLD_GPIOH_DIR		(IDP_CPLD_PHYS + 0x18)
+#define _IDP_CPLD_GPIOH_VALUE		(IDP_CPLD_PHYS + 0x1C)
+#define _IDP_CPLD_GPIOL_DIR		(IDP_CPLD_PHYS + 0x20)
+#define _IDP_CPLD_GPIOL_VALUE		(IDP_CPLD_PHYS + 0x24)
+#define _IDP_CPLD_PCCARD_PWR		(IDP_CPLD_PHYS + 0x28)
+#define _IDP_CPLD_MISC_CTRL		(IDP_CPLD_PHYS + 0x2C)
+#define _IDP_CPLD_LCD			(IDP_CPLD_PHYS + 0x30)
+#define _IDP_CPLD_FLASH_WE		(IDP_CPLD_PHYS + 0x34)
+
+#define _IDP_CPLD_KB_ROW		(IDP_CPLD_PHYS + 0x50)
+#define _IDP_CPLD_PCCARD0_STATUS	(IDP_CPLD_PHYS + 0x54)
+#define _IDP_CPLD_PCCARD1_STATUS	(IDP_CPLD_PHYS + 0x58)
+#define _IDP_CPLD_MISC_STATUS		(IDP_CPLD_PHYS + 0x5C)
+
+/* FPGA register virtual addresses */
+
+#define IDP_CPLD_REV			__CPLD_REG(_IDP_CPLD_REV)
+#define IDP_CPLD_PERIPH_PWR		__CPLD_REG(_IDP_CPLD_PERIPH_PWR)
+#define IDP_CPLD_LED_CONTROL		__CPLD_REG(_IDP_CPLD_LED_CONTROL)
+#define IDP_CPLD_KB_COL_HIGH		__CPLD_REG(_IDP_CPLD_KB_COL_HIGH)
+#define IDP_CPLD_KB_COL_LOW		__CPLD_REG(_IDP_CPLD_KB_COL_LOW)
+#define IDP_CPLD_PCCARD_EN		__CPLD_REG(_IDP_CPLD_PCCARD_EN)
+#define IDP_CPLD_GPIOH_DIR		__CPLD_REG(_IDP_CPLD_GPIOH_DIR)
+#define IDP_CPLD_GPIOH_VALUE		__CPLD_REG(_IDP_CPLD_GPIOH_VALUE)
+#define IDP_CPLD_GPIOL_DIR		__CPLD_REG(_IDP_CPLD_GPIOL_DIR)
+#define IDP_CPLD_GPIOL_VALUE		__CPLD_REG(_IDP_CPLD_GPIOL_VALUE)
+#define IDP_CPLD_PCCARD_PWR		__CPLD_REG(_IDP_CPLD_PCCARD_PWR)
+#define IDP_CPLD_MISC_CTRL		__CPLD_REG(_IDP_CPLD_MISC_CTRL)
+#define IDP_CPLD_LCD			__CPLD_REG(_IDP_CPLD_LCD)
+#define IDP_CPLD_FLASH_WE		__CPLD_REG(_IDP_CPLD_FLASH_WE)
+
+#define IDP_CPLD_KB_ROW		        __CPLD_REG(_IDP_CPLD_KB_ROW)
+#define IDP_CPLD_PCCARD0_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS)
+#define IDP_CPLD_PCCARD1_STATUS	        __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS)
+#define IDP_CPLD_MISC_STATUS		__CPLD_REG(_IDP_CPLD_MISC_STATUS)
+
+
+/*
+ * Bit masks for various registers
+ */
+
+// IDP_CPLD_PCCARD_PWR
+#define PCC0_PWR0	(1 << 0)
+#define PCC0_PWR1	(1 << 1)
+#define PCC0_PWR2	(1 << 2)
+#define PCC0_PWR3	(1 << 3)
+#define PCC1_PWR0	(1 << 4)
+#define PCC1_PWR1	(1 << 5)
+#define PCC1_PWR2	(1 << 6)
+#define PCC1_PWR3	(1 << 7)
+
+// IDP_CPLD_PCCARD_EN
+#define PCC0_RESET	(1 << 6)
+#define PCC1_RESET	(1 << 7)
+#define PCC0_ENABLE	(1 << 0)
+#define PCC1_ENABLE	(1 << 1)
+
+// IDP_CPLD_PCCARDx_STATUS
+#define _PCC_WRPROT	(1 << 7) // 7-4 read as low true
+#define _PCC_RESET	(1 << 6)
+#define _PCC_IRQ	(1 << 5)
+#define _PCC_INPACK	(1 << 4)
+#define PCC_BVD2	(1 << 3)
+#define PCC_BVD1	(1 << 2)
+#define PCC_VS2		(1 << 1)
+#define PCC_VS1		(1 << 0)
+
+#define PCC_DETECT(x)	(GPLR(7 + (x)) & GPIO_bit(7 + (x)))
+
+/* A listing of interrupts used by external hardware devices */
+
+#define TOUCH_PANEL_IRQ			IRQ_GPIO(5)
+#define IDE_IRQ				IRQ_GPIO(21)
+
+#define TOUCH_PANEL_IRQ_EDGE		IRQ_TYPE_EDGE_FALLING
+
+#define ETHERNET_IRQ			IRQ_GPIO(4)
+#define ETHERNET_IRQ_EDGE		IRQ_TYPE_EDGE_RISING
+
+#define IDE_IRQ_EDGE			IRQ_TYPE_EDGE_RISING
+
+#define PCMCIA_S0_CD_VALID		IRQ_GPIO(7)
+#define PCMCIA_S0_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S1_CD_VALID		IRQ_GPIO(8)
+#define PCMCIA_S1_CD_VALID_EDGE		IRQ_TYPE_EDGE_BOTH
+
+#define PCMCIA_S0_RDYINT		IRQ_GPIO(19)
+#define PCMCIA_S1_RDYINT		IRQ_GPIO(22)
+
+
+/*
+ * Macros for LED Driver
+ */
+
+/* leds 0 = ON */
+#define IDP_HB_LED	(1<<5)
+#define IDP_BUSY_LED	(1<<6)
+
+#define IDP_LEDS_MASK	(IDP_HB_LED | IDP_BUSY_LED)
+
+/*
+ * macros for MTD driver
+ */
+
+#define FLASH_WRITE_PROTECT_DISABLE()	((IDP_CPLD_FLASH_WE) &= ~(0x1))
+#define FLASH_WRITE_PROTECT_ENABLE()	((IDP_CPLD_FLASH_WE) |= (0x1))
+
+/*
+ * macros for matrix keyboard driver
+ */
+
+#define KEYBD_MATRIX_NUMBER_INPUTS	7
+#define KEYBD_MATRIX_NUMBER_OUTPUTS	14
+
+#define KEYBD_MATRIX_INVERT_OUTPUT_LOGIC	FALSE
+#define KEYBD_MATRIX_INVERT_INPUT_LOGIC		FALSE
+
+#define KEYBD_MATRIX_SETTLING_TIME_US			100
+#define KEYBD_MATRIX_KEYSTATE_DEBOUNCE_CONSTANT		2
+
+#define KEYBD_MATRIX_SET_OUTPUTS(outputs) \
+{\
+	IDP_CPLD_KB_COL_LOW = outputs;\
+	IDP_CPLD_KB_COL_HIGH = outputs >> 7;\
+}
+
+#define KEYBD_MATRIX_GET_INPUTS(inputs) \
+{\
+	inputs = (IDP_CPLD_KB_ROW & 0x7f);\
+}
+
+
diff --git a/arch/arm/mach-pxa/include/mach/io.h b/arch/arm/mach-pxa/include/mach/io.h
new file mode 100644
index 0000000..600fd4f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-pxa/include/mach/io.h
+ *
+ * Copied from asm/arch/sa1100/io.h
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#include <mach/hardware.h>
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irda.h b/arch/arm/mach-pxa/include/mach/irda.h
new file mode 100644
index 0000000..0a50c3c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irda.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF		1
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+
+struct pxaficp_platform_data {
+	int transceiver_cap;
+	void (*transceiver_mode)(struct device *dev, int mode);
+	int (*startup)(struct device *dev);
+	void (*shutdown)(struct device *dev);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+void pxa2xx_transceiver_mode(struct device *dev, int mode);
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h
new file mode 100644
index 0000000..9c163e1
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/irqs.h
@@ -0,0 +1,266 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/irqs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#ifdef CONFIG_PXA_HAVE_ISA_IRQS
+#define PXA_ISA_IRQ(x)	(x)
+#define PXA_ISA_IRQ_NUM	(16)
+#else
+#define PXA_ISA_IRQ_NUM	(0)
+#endif
+
+#define PXA_IRQ(x)	(PXA_ISA_IRQ_NUM + (x))
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_SSP3	PXA_IRQ(0)	/* SSP3 service request */
+#define IRQ_MSL		PXA_IRQ(1)	/* MSL Interface interrupt */
+#define IRQ_USBH2	PXA_IRQ(2)	/* USB Host interrupt 1 (OHCI) */
+#define IRQ_USBH1	PXA_IRQ(3)	/* USB Host interrupt 2 (non-OHCI) */
+#define IRQ_KEYPAD	PXA_IRQ(4)	/* Key pad controller */
+#define IRQ_MEMSTK	PXA_IRQ(5)	/* Memory Stick interrupt */
+#define IRQ_PWRI2C	PXA_IRQ(6)	/* Power I2C interrupt */
+#endif
+
+#define IRQ_HWUART	PXA_IRQ(7)	/* HWUART Transmit/Receive/Error (PXA26x) */
+#define IRQ_OST_4_11	PXA_IRQ(7)	/* OS timer 4-11 matches (PXA27x) */
+#define	IRQ_GPIO0	PXA_IRQ(8)	/* GPIO0 Edge Detect */
+#define	IRQ_GPIO1	PXA_IRQ(9)	/* GPIO1 Edge Detect */
+#define	IRQ_GPIO_2_x	PXA_IRQ(10)	/* GPIO[2-x] Edge Detect */
+#define	IRQ_USB		PXA_IRQ(11)	/* USB Service */
+#define	IRQ_PMU		PXA_IRQ(12)	/* Performance Monitoring Unit */
+#define	IRQ_I2S		PXA_IRQ(13)	/* I2S Interrupt */
+#define	IRQ_AC97	PXA_IRQ(14)	/* AC97 Interrupt */
+#define IRQ_ASSP	PXA_IRQ(15)	/* Audio SSP Service Request (PXA25x) */
+#define IRQ_USIM	PXA_IRQ(15)     /* Smart Card interface interrupt (PXA27x) */
+#define IRQ_NSSP	PXA_IRQ(16)	/* Network SSP Service Request (PXA25x) */
+#define IRQ_SSP2	PXA_IRQ(16)	/* SSP2 interrupt (PXA27x) */
+#define	IRQ_LCD		PXA_IRQ(17)	/* LCD Controller Service Request */
+#define	IRQ_I2C		PXA_IRQ(18)	/* I2C Service Request */
+#define	IRQ_ICP		PXA_IRQ(19)	/* ICP Transmit/Receive/Error */
+#define	IRQ_STUART	PXA_IRQ(20)	/* STUART Transmit/Receive/Error */
+#define	IRQ_BTUART	PXA_IRQ(21)	/* BTUART Transmit/Receive/Error */
+#define	IRQ_FFUART	PXA_IRQ(22)	/* FFUART Transmit/Receive/Error*/
+#define	IRQ_MMC		PXA_IRQ(23)	/* MMC Status/Error Detection */
+#define	IRQ_SSP		PXA_IRQ(24)	/* SSP Service Request */
+#define	IRQ_DMA 	PXA_IRQ(25)	/* DMA Channel Service Request */
+#define	IRQ_OST0 	PXA_IRQ(26)	/* OS Timer match 0 */
+#define	IRQ_OST1 	PXA_IRQ(27)	/* OS Timer match 1 */
+#define	IRQ_OST2 	PXA_IRQ(28)	/* OS Timer match 2 */
+#define	IRQ_OST3 	PXA_IRQ(29)	/* OS Timer match 3 */
+#define	IRQ_RTC1Hz	PXA_IRQ(30)	/* RTC HZ Clock Tick */
+#define	IRQ_RTCAlrm	PXA_IRQ(31)	/* RTC Alarm */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define IRQ_TPM		PXA_IRQ(32)	/* TPM interrupt */
+#define IRQ_CAMERA	PXA_IRQ(33)	/* Camera Interface */
+#endif
+
+#ifdef CONFIG_PXA3xx
+#define IRQ_SSP4	PXA_IRQ(13)	/* SSP4 service request */
+#define IRQ_CIR		PXA_IRQ(34)	/* Consumer IR */
+#define IRQ_TSI		PXA_IRQ(36)	/* Touch Screen Interface (PXA320) */
+#define IRQ_USIM2	PXA_IRQ(38)	/* USIM2 Controller */
+#define IRQ_GRPHICS	PXA_IRQ(39)	/* Graphics Controller */
+#define IRQ_MMC2	PXA_IRQ(41)	/* MMC2 Controller */
+#define IRQ_1WIRE	PXA_IRQ(44)	/* 1-Wire Controller */
+#define IRQ_NAND	PXA_IRQ(45)	/* NAND Controller */
+#define IRQ_USB2	PXA_IRQ(46)	/* USB 2.0 Device Controller */
+#define IRQ_WAKEUP0	PXA_IRQ(49)	/* EXT_WAKEUP0 */
+#define IRQ_WAKEUP1	PXA_IRQ(50)	/* EXT_WAKEUP1 */
+#define IRQ_DMEMC	PXA_IRQ(51)	/* Dynamic Memory Controller */
+#define IRQ_MMC3	PXA_IRQ(55)	/* MMC3 Controller (PXA310) */
+#endif
+
+#define PXA_GPIO_IRQ_BASE	PXA_IRQ(64)
+#define PXA_GPIO_IRQ_NUM	(128)
+
+#define GPIO_2_x_TO_IRQ(x)	(PXA_GPIO_IRQ_BASE + (x))
+#define IRQ_GPIO(x)	(((x) < 2) ? (IRQ_GPIO0 + (x)) : GPIO_2_x_TO_IRQ(x))
+
+#define IRQ_TO_GPIO_2_x(i)	((i) - PXA_GPIO_IRQ_BASE)
+#define IRQ_TO_GPIO(i)	(((i) < IRQ_GPIO(2)) ? ((i) - IRQ_GPIO0) : IRQ_TO_GPIO_2_x(i))
+
+/*
+ * The next 16 interrupts are for board specific purposes.  Since
+ * the kernel can only run on one machine at a time, we can re-use
+ * these.  If you need more, increase IRQ_BOARD_END, but keep it
+ * within sensible limits.
+ */
+#define IRQ_BOARD_START		(PXA_GPIO_IRQ_BASE + PXA_GPIO_IRQ_NUM)
+#define IRQ_BOARD_END		(IRQ_BOARD_START + 16)
+
+#define IRQ_SA1111_START	(IRQ_BOARD_END)
+#define IRQ_GPAIN0		(IRQ_BOARD_END + 0)
+#define IRQ_GPAIN1		(IRQ_BOARD_END + 1)
+#define IRQ_GPAIN2		(IRQ_BOARD_END + 2)
+#define IRQ_GPAIN3		(IRQ_BOARD_END + 3)
+#define IRQ_GPBIN0		(IRQ_BOARD_END + 4)
+#define IRQ_GPBIN1		(IRQ_BOARD_END + 5)
+#define IRQ_GPBIN2		(IRQ_BOARD_END + 6)
+#define IRQ_GPBIN3		(IRQ_BOARD_END + 7)
+#define IRQ_GPBIN4		(IRQ_BOARD_END + 8)
+#define IRQ_GPBIN5		(IRQ_BOARD_END + 9)
+#define IRQ_GPCIN0		(IRQ_BOARD_END + 10)
+#define IRQ_GPCIN1		(IRQ_BOARD_END + 11)
+#define IRQ_GPCIN2		(IRQ_BOARD_END + 12)
+#define IRQ_GPCIN3		(IRQ_BOARD_END + 13)
+#define IRQ_GPCIN4		(IRQ_BOARD_END + 14)
+#define IRQ_GPCIN5		(IRQ_BOARD_END + 15)
+#define IRQ_GPCIN6		(IRQ_BOARD_END + 16)
+#define IRQ_GPCIN7		(IRQ_BOARD_END + 17)
+#define IRQ_MSTXINT		(IRQ_BOARD_END + 18)
+#define IRQ_MSRXINT		(IRQ_BOARD_END + 19)
+#define IRQ_MSSTOPERRINT	(IRQ_BOARD_END + 20)
+#define IRQ_TPTXINT		(IRQ_BOARD_END + 21)
+#define IRQ_TPRXINT		(IRQ_BOARD_END + 22)
+#define IRQ_TPSTOPERRINT	(IRQ_BOARD_END + 23)
+#define SSPXMTINT		(IRQ_BOARD_END + 24)
+#define SSPRCVINT		(IRQ_BOARD_END + 25)
+#define SSPROR			(IRQ_BOARD_END + 26)
+#define AUDXMTDMADONEA		(IRQ_BOARD_END + 32)
+#define AUDRCVDMADONEA		(IRQ_BOARD_END + 33)
+#define AUDXMTDMADONEB		(IRQ_BOARD_END + 34)
+#define AUDRCVDMADONEB		(IRQ_BOARD_END + 35)
+#define AUDTFSR			(IRQ_BOARD_END + 36)
+#define AUDRFSR			(IRQ_BOARD_END + 37)
+#define AUDTUR			(IRQ_BOARD_END + 38)
+#define AUDROR			(IRQ_BOARD_END + 39)
+#define AUDDTS			(IRQ_BOARD_END + 40)
+#define AUDRDD			(IRQ_BOARD_END + 41)
+#define AUDSTO			(IRQ_BOARD_END + 42)
+#define IRQ_USBPWR		(IRQ_BOARD_END + 43)
+#define IRQ_HCIM		(IRQ_BOARD_END + 44)
+#define IRQ_HCIBUFFACC		(IRQ_BOARD_END + 45)
+#define IRQ_HCIRMTWKP		(IRQ_BOARD_END + 46)
+#define IRQ_NHCIMFCIR		(IRQ_BOARD_END + 47)
+#define IRQ_USB_PORT_RESUME	(IRQ_BOARD_END + 48)
+#define IRQ_S0_READY_NINT	(IRQ_BOARD_END + 49)
+#define IRQ_S1_READY_NINT	(IRQ_BOARD_END + 50)
+#define IRQ_S0_CD_VALID		(IRQ_BOARD_END + 51)
+#define IRQ_S1_CD_VALID		(IRQ_BOARD_END + 52)
+#define IRQ_S0_BVD1_STSCHG	(IRQ_BOARD_END + 53)
+#define IRQ_S1_BVD1_STSCHG	(IRQ_BOARD_END + 54)
+
+#define IRQ_LOCOMO_START	(IRQ_BOARD_END)
+#define IRQ_LOCOMO_KEY		(IRQ_BOARD_END + 0)
+#define IRQ_LOCOMO_GPIO0	(IRQ_BOARD_END + 1)
+#define IRQ_LOCOMO_GPIO1	(IRQ_BOARD_END + 2)
+#define IRQ_LOCOMO_GPIO2	(IRQ_BOARD_END + 3)
+#define IRQ_LOCOMO_GPIO3	(IRQ_BOARD_END + 4)
+#define IRQ_LOCOMO_GPIO4	(IRQ_BOARD_END + 5)
+#define IRQ_LOCOMO_GPIO5	(IRQ_BOARD_END + 6)
+#define IRQ_LOCOMO_GPIO6	(IRQ_BOARD_END + 7)
+#define IRQ_LOCOMO_GPIO7	(IRQ_BOARD_END + 8)
+#define IRQ_LOCOMO_GPIO8	(IRQ_BOARD_END + 9)
+#define IRQ_LOCOMO_GPIO9	(IRQ_BOARD_END + 10)
+#define IRQ_LOCOMO_GPIO10	(IRQ_BOARD_END + 11)
+#define IRQ_LOCOMO_GPIO11	(IRQ_BOARD_END + 12)
+#define IRQ_LOCOMO_GPIO12	(IRQ_BOARD_END + 13)
+#define IRQ_LOCOMO_GPIO13	(IRQ_BOARD_END + 14)
+#define IRQ_LOCOMO_GPIO14	(IRQ_BOARD_END + 15)
+#define IRQ_LOCOMO_GPIO15	(IRQ_BOARD_END + 16)
+#define IRQ_LOCOMO_LT		(IRQ_BOARD_END + 17)
+#define IRQ_LOCOMO_SPI_RFR	(IRQ_BOARD_END + 18)
+#define IRQ_LOCOMO_SPI_RFW	(IRQ_BOARD_END + 19)
+#define IRQ_LOCOMO_SPI_OVRN	(IRQ_BOARD_END + 20)
+#define IRQ_LOCOMO_SPI_TEND	(IRQ_BOARD_END + 21)
+
+/*
+ * Figure out the MAX IRQ number.
+ *
+ * If we have an SA1111, the max IRQ is S1_BVD1_STSCHG+1.
+ * If we have an LoCoMo, the max IRQ is IRQ_LOCOMO_SPI_TEND+1
+ * Otherwise, we have the standard IRQs only.
+ */
+#ifdef CONFIG_SA1111
+#define NR_IRQS			(IRQ_S1_BVD1_STSCHG + 1)
+#elif defined(CONFIG_SHARP_LOCOMO)
+#define NR_IRQS			(IRQ_LOCOMO_SPI_TEND + 1)
+#elif defined(CONFIG_PXA_HAVE_BOARD_IRQS)
+#define NR_IRQS			(IRQ_BOARD_END)
+#elif defined(CONFIG_MACH_ZYLONITE)
+#define NR_IRQS			(IRQ_BOARD_START + 32)
+#else
+#define NR_IRQS			(IRQ_BOARD_START)
+#endif
+
+/*
+ * Board specific IRQs.  Define them here.
+ * Do not surround them with ifdefs.
+ */
+#define LUBBOCK_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LUBBOCK_SD_IRQ		LUBBOCK_IRQ(0)
+#define LUBBOCK_SA1111_IRQ	LUBBOCK_IRQ(1)
+#define LUBBOCK_USB_IRQ		LUBBOCK_IRQ(2)  /* usb connect */
+#define LUBBOCK_ETH_IRQ		LUBBOCK_IRQ(3)
+#define LUBBOCK_UCB1400_IRQ	LUBBOCK_IRQ(4)
+#define LUBBOCK_BB_IRQ		LUBBOCK_IRQ(5)
+#define LUBBOCK_USB_DISC_IRQ	LUBBOCK_IRQ(6)  /* usb disconnect */
+#define LUBBOCK_LAST_IRQ	LUBBOCK_IRQ(6)
+
+#define LPD270_IRQ(x)		(IRQ_BOARD_START + (x))
+#define LPD270_USBC_IRQ		LPD270_IRQ(2)
+#define LPD270_ETHERNET_IRQ	LPD270_IRQ(3)
+#define LPD270_AC97_IRQ		LPD270_IRQ(4)
+
+#define MAINSTONE_IRQ(x)	(IRQ_BOARD_START + (x))
+#define MAINSTONE_MMC_IRQ	MAINSTONE_IRQ(0)
+#define MAINSTONE_USIM_IRQ	MAINSTONE_IRQ(1)
+#define MAINSTONE_USBC_IRQ	MAINSTONE_IRQ(2)
+#define MAINSTONE_ETHERNET_IRQ	MAINSTONE_IRQ(3)
+#define MAINSTONE_AC97_IRQ	MAINSTONE_IRQ(4)
+#define MAINSTONE_PEN_IRQ	MAINSTONE_IRQ(5)
+#define MAINSTONE_MSINS_IRQ	MAINSTONE_IRQ(6)
+#define MAINSTONE_EXBRD_IRQ	MAINSTONE_IRQ(7)
+#define MAINSTONE_S0_CD_IRQ	MAINSTONE_IRQ(9)
+#define MAINSTONE_S0_STSCHG_IRQ	MAINSTONE_IRQ(10)
+#define MAINSTONE_S0_IRQ	MAINSTONE_IRQ(11)
+#define MAINSTONE_S1_CD_IRQ	MAINSTONE_IRQ(13)
+#define MAINSTONE_S1_STSCHG_IRQ	MAINSTONE_IRQ(14)
+#define MAINSTONE_S1_IRQ	MAINSTONE_IRQ(15)
+
+/* LoCoMo Interrupts (CONFIG_SHARP_LOCOMO) */
+#define IRQ_LOCOMO_KEY_BASE	(IRQ_BOARD_START + 0)
+#define IRQ_LOCOMO_GPIO_BASE	(IRQ_BOARD_START + 1)
+#define IRQ_LOCOMO_LT_BASE	(IRQ_BOARD_START + 2)
+#define IRQ_LOCOMO_SPI_BASE	(IRQ_BOARD_START + 3)
+
+/* phyCORE-PXA270 (PCM027) Interrupts */
+#define PCM027_IRQ(x)          (IRQ_BOARD_START + (x))
+#define PCM027_BTDET_IRQ       PCM027_IRQ(0)
+#define PCM027_FF_RI_IRQ       PCM027_IRQ(1)
+#define PCM027_MMCDET_IRQ      PCM027_IRQ(2)
+#define PCM027_PM_5V_IRQ       PCM027_IRQ(3)
+
+/* ITE8152 irqs */
+/* add IT8152 IRQs beyond BOARD_END */
+#ifdef CONFIG_PCI_HOST_ITE8152
+#define IT8152_IRQ(x)   (IRQ_BOARD_END + (x))
+
+/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */
+#define IT8152_LD_IRQ_COUNT     9
+#define IT8152_LP_IRQ_COUNT     16
+#define IT8152_PD_IRQ_COUNT     15
+
+/* Priorities: */
+#define IT8152_PD_IRQ(i)        IT8152_IRQ(i)
+#define IT8152_LP_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT)
+#define IT8152_LD_IRQ(i)        (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT)
+
+#define IT8152_LAST_IRQ         IT8152_LD_IRQ(IT8152_LD_IRQ_COUNT - 1)
+
+#if NR_IRQS < (IT8152_LAST_IRQ+1)
+#undef NR_IRQS
+#define NR_IRQS (IT8152_LAST_IRQ+1)
+#endif
+
+#endif /* CONFIG_PCI_HOST_ITE8152 */
diff --git a/arch/arm/mach-pxa/include/mach/littleton.h b/arch/arm/mach-pxa/include/mach/littleton.h
new file mode 100644
index 0000000..5c4e320
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/littleton.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define LITTLETON_ETH_PHYS	0x30000000
+
+#define LITTLETON_GPIO_LCD_CS	(17)
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/include/mach/lpd270.h b/arch/arm/mach-pxa/include/mach/lpd270.h
new file mode 100644
index 0000000..f89fb71
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lpd270.h
@@ -0,0 +1,38 @@
+/*
+ * arch/arm/mach-pxa/include/mach/lpd270.h
+ *
+ * Author:	Lennert Buytenhek
+ * Created:	Feb 10, 2006
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_LPD270_H
+#define __ASM_ARCH_LPD270_H
+
+#define LPD270_CPLD_PHYS	PXA_CS2_PHYS
+#define LPD270_CPLD_VIRT	0xf0000000
+#define LPD270_CPLD_SIZE	0x00100000
+
+#define LPD270_ETH_PHYS		(PXA_CS2_PHYS + 0x01000000)
+
+/* CPLD registers  */
+#define LPD270_CPLD_REG(x)	((unsigned long)(LPD270_CPLD_VIRT + (x)))
+#define LPD270_CONTROL		LPD270_CPLD_REG(0x00)
+#define LPD270_PERIPHERAL0	LPD270_CPLD_REG(0x04)
+#define LPD270_PERIPHERAL1	LPD270_CPLD_REG(0x08)
+#define LPD270_CPLD_REVISION	LPD270_CPLD_REG(0x14)
+#define LPD270_EEPROM_SPI_ITF	LPD270_CPLD_REG(0x20)
+#define LPD270_MODE_PINS	LPD270_CPLD_REG(0x24)
+#define LPD270_EGPIO		LPD270_CPLD_REG(0x30)
+#define LPD270_INT_MASK		LPD270_CPLD_REG(0x40)
+#define LPD270_INT_STATUS	LPD270_CPLD_REG(0x50)
+
+#define LPD270_INT_AC97		(1 << 4)  /* AC'97 CODEC IRQ */
+#define LPD270_INT_ETHERNET	(1 << 3)  /* Ethernet controller IRQ */
+#define LPD270_INT_USBC		(1 << 2)  /* USB client cable detection IRQ */
+
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/lubbock.h b/arch/arm/mach-pxa/include/mach/lubbock.h
new file mode 100644
index 0000000..4cb2415
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/lubbock.h
@@ -0,0 +1,40 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/lubbock.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define LUBBOCK_ETH_PHYS	PXA_CS3_PHYS
+
+#define LUBBOCK_FPGA_PHYS	PXA_CS2_PHYS
+#define LUBBOCK_FPGA_VIRT	(0xf0000000)
+#define LUB_P2V(x)		((x) - LUBBOCK_FPGA_PHYS + LUBBOCK_FPGA_VIRT)
+#define LUB_V2P(x)		((x) - LUBBOCK_FPGA_VIRT + LUBBOCK_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __LUB_REG(x)		(*((volatile unsigned long *)LUB_P2V(x)))
+#else
+#  define __LUB_REG(x)		LUB_P2V(x)
+#endif
+
+/* FPGA register virtual addresses */
+#define LUB_WHOAMI		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x000)
+#define LUB_HEXLED		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x010)
+#define LUB_DISC_BLNK_LED	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x040)
+#define LUB_CONF_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x050)
+#define LUB_USER_SWITCHES	__LUB_REG(LUBBOCK_FPGA_PHYS + 0x060)
+#define LUB_MISC_WR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x080)
+#define LUB_MISC_RD		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x090)
+#define LUB_IRQ_MASK_EN		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0c0)
+#define LUB_IRQ_SET_CLR		__LUB_REG(LUBBOCK_FPGA_PHYS + 0x0d0)
+#define LUB_GP			__LUB_REG(LUBBOCK_FPGA_PHYS + 0x100)
+
+#ifndef __ASSEMBLY__
+extern void lubbock_set_misc_wr(unsigned int mask, unsigned int set);
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h
new file mode 100644
index 0000000..38d68d9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/magician.h
@@ -0,0 +1,117 @@
+/*
+ * GPIO and IRQ definitions for HTC Magician PDA phones
+ *
+ * Copyright (c) 2007 Philipp Zabel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MAGICIAN_H_
+#define _MAGICIAN_H_
+
+#include <mach/irqs.h>
+
+/*
+ * PXA GPIOs
+ */
+
+#define GPIO0_MAGICIAN_KEY_POWER		0
+#define GPIO9_MAGICIAN_UNKNOWN			9
+#define GPIO10_MAGICIAN_GSM_IRQ			10
+#define GPIO11_MAGICIAN_GSM_OUT1		11
+#define GPIO13_MAGICIAN_CPLD_IRQ		13
+#define GPIO18_MAGICIAN_UNKNOWN			18
+#define GPIO22_MAGICIAN_VIBRA_EN		22
+#define GPIO26_MAGICIAN_GSM_POWER		26
+#define GPIO27_MAGICIAN_USBC_PUEN		27
+#define GPIO30_MAGICIAN_nCHARGE_EN		30
+#define GPIO37_MAGICIAN_KEY_HANGUP		37
+#define GPIO38_MAGICIAN_KEY_CONTACTS		38
+#define GPIO40_MAGICIAN_GSM_OUT2		40
+#define GPIO48_MAGICIAN_UNKNOWN			48
+#define GPIO56_MAGICIAN_UNKNOWN			56
+#define GPIO57_MAGICIAN_CAM_RESET		57
+#define GPIO75_MAGICIAN_SAMSUNG_POWER		75
+#define GPIO83_MAGICIAN_nIR_EN			83
+#define GPIO86_MAGICIAN_GSM_RESET		86
+#define GPIO87_MAGICIAN_GSM_SELECT		87
+#define GPIO90_MAGICIAN_KEY_CALENDAR		90
+#define GPIO91_MAGICIAN_KEY_CAMERA		91
+#define GPIO93_MAGICIAN_KEY_UP			93
+#define GPIO94_MAGICIAN_KEY_DOWN		94
+#define GPIO95_MAGICIAN_KEY_LEFT		95
+#define GPIO96_MAGICIAN_KEY_RIGHT		96
+#define GPIO97_MAGICIAN_KEY_ENTER		97
+#define GPIO98_MAGICIAN_KEY_RECORD		98
+#define GPIO99_MAGICIAN_HEADPHONE_IN		99
+#define GPIO100_MAGICIAN_KEY_VOL_UP		100
+#define GPIO101_MAGICIAN_KEY_VOL_DOWN 		101
+#define GPIO102_MAGICIAN_KEY_PHONE		102
+#define GPIO103_MAGICIAN_LED_KP			103
+#define GPIO104_MAGICIAN_LCD_POWER_1 		104
+#define GPIO105_MAGICIAN_LCD_POWER_2		105
+#define GPIO106_MAGICIAN_LCD_POWER_3		106
+#define GPIO107_MAGICIAN_DS1WM_IRQ		107
+#define GPIO108_MAGICIAN_GSM_READY		108
+#define GPIO114_MAGICIAN_UNKNOWN		114
+#define GPIO115_MAGICIAN_nPEN_IRQ		115
+#define GPIO116_MAGICIAN_nCAM_EN		116
+#define GPIO119_MAGICIAN_UNKNOWN		119
+#define GPIO120_MAGICIAN_UNKNOWN		120
+
+/*
+ * CPLD IRQs
+ */
+
+#define IRQ_MAGICIAN_SD		(IRQ_BOARD_START + 0)
+#define IRQ_MAGICIAN_EP		(IRQ_BOARD_START + 1)
+#define IRQ_MAGICIAN_BT		(IRQ_BOARD_START + 2)
+#define IRQ_MAGICIAN_AC		(IRQ_BOARD_START + 3)
+
+/*
+ * CPLD EGPIOs
+ */
+
+#define MAGICIAN_EGPIO_BASE			0x80 /* GPIO_BOARD_START */
+#define MAGICIAN_EGPIO(reg,bit) \
+	(MAGICIAN_EGPIO_BASE + 8*reg + bit)
+
+/* output */
+
+#define EGPIO_MAGICIAN_TOPPOLY_POWER		MAGICIAN_EGPIO(0, 2)
+#define EGPIO_MAGICIAN_LED_POWER		MAGICIAN_EGPIO(0, 5)
+#define EGPIO_MAGICIAN_GSM_RESET		MAGICIAN_EGPIO(0, 6)
+#define EGPIO_MAGICIAN_LCD_POWER		MAGICIAN_EGPIO(0, 7)
+#define EGPIO_MAGICIAN_SPK_POWER		MAGICIAN_EGPIO(1, 0)
+#define EGPIO_MAGICIAN_EP_POWER			MAGICIAN_EGPIO(1, 1)
+#define EGPIO_MAGICIAN_IN_SEL0			MAGICIAN_EGPIO(1, 2)
+#define EGPIO_MAGICIAN_IN_SEL1			MAGICIAN_EGPIO(1, 3)
+#define EGPIO_MAGICIAN_MIC_POWER		MAGICIAN_EGPIO(1, 4)
+#define EGPIO_MAGICIAN_CODEC_RESET		MAGICIAN_EGPIO(1, 5)
+#define EGPIO_MAGICIAN_CODEC_POWER		MAGICIAN_EGPIO(1, 6)
+#define EGPIO_MAGICIAN_BL_POWER			MAGICIAN_EGPIO(1, 7)
+#define EGPIO_MAGICIAN_SD_POWER			MAGICIAN_EGPIO(2, 0)
+#define EGPIO_MAGICIAN_CARKIT_MIC		MAGICIAN_EGPIO(2, 1)
+#define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL	MAGICIAN_EGPIO(2, 2)
+#define EGPIO_MAGICIAN_FLASH_VPP		MAGICIAN_EGPIO(2, 3)
+#define EGPIO_MAGICIAN_BL_POWER2		MAGICIAN_EGPIO(2, 4)
+#define EGPIO_MAGICIAN_CHARGE_EN		MAGICIAN_EGPIO(2, 5)
+#define EGPIO_MAGICIAN_GSM_POWER		MAGICIAN_EGPIO(2, 7)
+
+/* input */
+
+#define EGPIO_MAGICIAN_CABLE_STATE_AC		MAGICIAN_EGPIO(4, 0)
+#define EGPIO_MAGICIAN_CABLE_STATE_USB		MAGICIAN_EGPIO(4, 1)
+
+#define EGPIO_MAGICIAN_BOARD_ID0		MAGICIAN_EGPIO(5, 0)
+#define EGPIO_MAGICIAN_BOARD_ID1		MAGICIAN_EGPIO(5, 1)
+#define EGPIO_MAGICIAN_BOARD_ID2		MAGICIAN_EGPIO(5, 2)
+#define EGPIO_MAGICIAN_LCD_SELECT		MAGICIAN_EGPIO(5, 3)
+#define EGPIO_MAGICIAN_nSD_READONLY		MAGICIAN_EGPIO(5, 4)
+
+#define EGPIO_MAGICIAN_EP_INSERT		MAGICIAN_EGPIO(6, 1)
+
+#endif /* _MAGICIAN_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/mainstone.h b/arch/arm/mach-pxa/include/mach/mainstone.h
new file mode 100644
index 0000000..3461c43
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mainstone.h
@@ -0,0 +1,120 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/mainstone.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Nov 14, 2002
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ASM_ARCH_MAINSTONE_H
+#define ASM_ARCH_MAINSTONE_H
+
+#define MST_ETH_PHYS		PXA_CS4_PHYS
+
+#define MST_FPGA_PHYS		PXA_CS2_PHYS
+#define MST_FPGA_VIRT		(0xf0000000)
+#define MST_P2V(x)		((x) - MST_FPGA_PHYS + MST_FPGA_VIRT)
+#define MST_V2P(x)		((x) - MST_FPGA_VIRT + MST_FPGA_PHYS)
+
+#ifndef __ASSEMBLY__
+# define __MST_REG(x)		(*((volatile unsigned long *)MST_P2V(x)))
+#else
+# define __MST_REG(x)		MST_P2V(x)
+#endif
+
+/* board level registers in the FPGA */
+
+#define MST_LEDDAT1		__MST_REG(0x08000010)
+#define MST_LEDDAT2		__MST_REG(0x08000014)
+#define MST_LEDCTRL		__MST_REG(0x08000040)
+#define MST_GPSWR		__MST_REG(0x08000060)
+#define MST_MSCWR1		__MST_REG(0x08000080)
+#define MST_MSCWR2		__MST_REG(0x08000084)
+#define MST_MSCWR3		__MST_REG(0x08000088)
+#define MST_MSCRD		__MST_REG(0x08000090)
+#define MST_INTMSKENA		__MST_REG(0x080000c0)
+#define MST_INTSETCLR		__MST_REG(0x080000d0)
+#define MST_PCMCIA0		__MST_REG(0x080000e0)
+#define MST_PCMCIA1		__MST_REG(0x080000e4)
+
+#define MST_MSCWR1_CAMERA_ON	(1 << 15)  /* Camera interface power control */
+#define MST_MSCWR1_CAMERA_SEL	(1 << 14)  /* Camera interface mux control */
+#define MST_MSCWR1_LCD_CTL	(1 << 13)  /* General-purpose LCD control */
+#define MST_MSCWR1_MS_ON	(1 << 12)  /* Memory Stick power control */
+#define MST_MSCWR1_MMC_ON	(1 << 11)  /* MultiMediaCard* power control */
+#define MST_MSCWR1_MS_SEL	(1 << 10)  /* SD/MS multiplexer control */
+#define MST_MSCWR1_BB_SEL	(1 << 9)   /* PCMCIA/Baseband multiplexer */
+#define MST_MSCWR1_BT_ON	(1 << 8)   /* Bluetooth UART transceiver */
+#define MST_MSCWR1_BTDTR	(1 << 7)   /* Bluetooth UART DTR */
+
+#define MST_MSCWR1_IRDA_MASK	(3 << 5)   /* IrDA transceiver mode */
+#define MST_MSCWR1_IRDA_FULL	(0 << 5)   /* full distance power */
+#define MST_MSCWR1_IRDA_OFF	(1 << 5)   /* shutdown */
+#define MST_MSCWR1_IRDA_MED	(2 << 5)   /* 2/3 distance power */
+#define MST_MSCWR1_IRDA_LOW	(3 << 5)   /* 1/3 distance power */
+
+#define MST_MSCWR1_IRDA_FIR	(1 << 4)   /* IrDA transceiver SIR/FIR */
+#define MST_MSCWR1_GREENLED	(1 << 3)   /* LED D1 control */
+#define MST_MSCWR1_PDC_CTL	(1 << 2)   /* reserved */
+#define MST_MSCWR1_MTR_ON	(1 << 1)   /* Silent alert motor */
+#define MST_MSCWR1_SYSRESET	(1 << 0)   /* System reset */
+
+#define MST_MSCWR2_USB_OTG_RST	(1 << 6)   /* USB On The Go reset */
+#define MST_MSCWR2_USB_OTG_SEL	(1 << 5)   /* USB On The Go control */
+#define MST_MSCWR2_nUSBC_SC	(1 << 4)   /* USB client soft connect control */
+#define MST_MSCWR2_I2S_SPKROFF	(1 << 3)   /* I2S CODEC amplifier control */
+#define MST_MSCWR2_AC97_SPKROFF	(1 << 2)   /* AC97 CODEC amplifier control */
+#define MST_MSCWR2_RADIO_PWR	(1 << 1)   /* Radio module power control */
+#define MST_MSCWR2_RADIO_WAKE	(1 << 0)   /* Radio module wake-up signal */
+
+#define MST_MSCWR3_GPIO_RESET_EN	(1 << 2) /* Enable GPIO Reset */
+#define MST_MSCWR3_GPIO_RESET		(1 << 1) /* Initiate a GPIO Reset */
+#define MST_MSCWR3_COMMS_SW_RESET	(1 << 0) /* Communications Processor Reset Control */
+
+#define MST_MSCRD_nPENIRQ	(1 << 9)   /* ADI7873* nPENIRQ signal */
+#define MST_MSCRD_nMEMSTK_CD	(1 << 8)   /* Memory Stick detection signal */
+#define MST_MSCRD_nMMC_CD	(1 << 7)   /* SD/MMC card detection signal */
+#define MST_MSCRD_nUSIM_CD	(1 << 6)   /* USIM card detection signal */
+#define MST_MSCRD_USB_CBL	(1 << 5)   /* USB client cable status */
+#define MST_MSCRD_TS_BUSY	(1 << 4)   /* ADI7873 busy */
+#define MST_MSCRD_BTDSR		(1 << 3)   /* Bluetooth UART DSR */
+#define MST_MSCRD_BTRI		(1 << 2)   /* Bluetooth UART Ring Indicator */
+#define MST_MSCRD_BTDCD		(1 << 1)   /* Bluetooth UART DCD */
+#define MST_MSCRD_nMMC_WP	(1 << 0)   /* SD/MMC write-protect status */
+
+#define MST_INT_S1_IRQ		(1 << 15)  /* PCMCIA socket 1 IRQ */
+#define MST_INT_S1_STSCHG	(1 << 14)  /* PCMCIA socket 1 status changed */
+#define MST_INT_S1_CD		(1 << 13)  /* PCMCIA socket 1 card detection */
+#define MST_INT_S0_IRQ		(1 << 11)  /* PCMCIA socket 0 IRQ */
+#define MST_INT_S0_STSCHG	(1 << 10)  /* PCMCIA socket 0 status changed */
+#define MST_INT_S0_CD		(1 << 9)   /* PCMCIA socket 0 card detection */
+#define MST_INT_nEXBRD_INT	(1 << 7)   /* Expansion board IRQ */
+#define MST_INT_MSINS		(1 << 6)   /* Memory Stick* detection */
+#define MST_INT_PENIRQ		(1 << 5)   /* ADI7873* touch-screen IRQ */
+#define MST_INT_AC97		(1 << 4)   /* AC'97 CODEC IRQ */
+#define MST_INT_ETHERNET	(1 << 3)   /* Ethernet controller IRQ */
+#define MST_INT_USBC		(1 << 2)   /* USB client cable detection IRQ */
+#define MST_INT_USIM		(1 << 1)   /* USIM card detection IRQ */
+#define MST_INT_MMC		(1 << 0)   /* MMC/SD card detection IRQ */
+
+#define MST_PCMCIA_nIRQ		(1 << 10)  /* IRQ / ready signal */
+#define MST_PCMCIA_nSPKR_BVD2	(1 << 9)   /* VDD sense / digital speaker */
+#define MST_PCMCIA_nSTSCHG_BVD1	(1 << 8)   /* VDD sense / card status changed */
+#define MST_PCMCIA_nVS2		(1 << 7)   /* VSS voltage sense */
+#define MST_PCMCIA_nVS1		(1 << 6)   /* VSS voltage sense */
+#define MST_PCMCIA_nCD		(1 << 5)   /* Card detection signal */
+#define MST_PCMCIA_RESET	(1 << 4)   /* Card reset signal */
+#define MST_PCMCIA_PWR_MASK	(0x000f)   /* MAX1602 power-supply controls */
+
+#define MST_PCMCIA_PWR_VPP_0    0x0	   /* voltage VPP = 0V */
+#define MST_PCMCIA_PWR_VPP_120  0x2 	   /* voltage VPP = 12V*/
+#define MST_PCMCIA_PWR_VPP_VCC  0x1	   /* voltage VPP = VCC */
+#define MST_PCMCIA_PWR_VCC_0    0x0	   /* voltage VCC = 0V */
+#define MST_PCMCIA_PWR_VCC_33   0x8	   /* voltage VCC = 3.3V */
+#define MST_PCMCIA_PWR_VCC_50   0x4	   /* voltage VCC = 5.0V */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h
new file mode 100644
index 0000000..59aef89
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/memory.h
@@ -0,0 +1,52 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/memory.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0xa0000000)
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *		address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *		to an address that the kernel can use.
+ */
+#define __virt_to_bus(x)	 __virt_to_phys(x)
+#define __bus_to_virt(x)	 __phys_to_virt(x)
+
+/*
+ * The nodes are matched with the physical SDRAM banks as follows:
+ *
+ * 	node 0:  0xa0000000-0xa3ffffff	-->  0xc0000000-0xc3ffffff
+ * 	node 1:  0xa4000000-0xa7ffffff	-->  0xc4000000-0xc7ffffff
+ * 	node 2:  0xa8000000-0xabffffff	-->  0xc8000000-0xcbffffff
+ * 	node 3:  0xac000000-0xafffffff	-->  0xcc000000-0xcfffffff
+ *
+ * This needs a node mem size of 26 bits.
+ */
+#define NODE_MEM_SIZE_BITS	26
+
+#if !defined(__ASSEMBLY__) && defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI)
+void cmx2xx_pci_adjust_zones(int node, unsigned long *size,
+			     unsigned long *holes);
+
+#define arch_adjust_zones(node, size, holes) \
+	cmx2xx_pci_adjust_zones(node, size, holes)
+
+#define ISA_DMA_THRESHOLD	(PHYS_OFFSET + SZ_64M - 1)
+#endif
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
new file mode 100644
index 0000000..617cab2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -0,0 +1,161 @@
+#ifndef __ASM_ARCH_MFP_PXA25X_H
+#define __ASM_ARCH_MFP_PXA25X_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO2_GPIO		MFP_CFG_IN(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG_IN(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG_IN(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG_IN(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG_IN(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG_IN(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG_IN(GPIO8, AF0)
+
+#define GPIO1_RST		MFP_CFG_IN(GPIO1, AF1)
+
+/* Crystal and Clock Signals */
+#define GPIO10_RTCCLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO70_RTCCLK		MFP_CFG_OUT(GPIO70, AF1, DRIVE_LOW)
+#define GPIO7_48MHz		MFP_CFG_OUT(GPIO7,  AF1, DRIVE_LOW)
+#define GPIO11_3_6MHz		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO71_3_6MHz		MFP_CFG_OUT(GPIO71, AF1, DRIVE_LOW)
+#define GPIO12_32KHz		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+#define GPIO72_32kHz		MFP_CFG_OUT(GPIO72, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO19_DREQ_1		MFP_CFG_IN(GPIO19, AF1)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO13_MBGNT		MFP_CFG_OUT(GPIO13, AF2, DRIVE_LOW)
+#define GPIO73_MBGNT		MFP_CFG_OUT(GPIO73, AF1, DRIVE_LOW)
+#define GPIO14_MBREQ		MFP_CFG_IN(GPIO14, AF1)
+#define GPIO66_MBREQ		MFP_CFG_IN(GPIO66, AF1)
+
+/* PC CARD */
+#define GPIO52_nPCE_1		MFP_CFG_OUT(GPIO52, AF2, DRIVE_HIGH)
+#define GPIO53_nPCE_2		MFP_CFG_OUT(GPIO53, AF2, DRIVE_HIGH)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO54_nPSKTSEL		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+
+/* FFUART */
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* HWUART */
+#define GPIO42_HWUART_RXD	MFP_CFG_IN(GPIO42, AF3)
+#define GPIO43_HWUART_TXD	MFP_CFG_OUT(GPIO43, AF3, DRIVE_HIGH)
+#define GPIO44_HWUART_CTS	MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_HWUART_RTS	MFP_CFG_OUT(GPIO45, AF3, DRIVE_HIGH)
+#define GPIO48_HWUART_TXD	MFP_CFG_OUT(GPIO48, AF1, DRIVE_HIGH)
+#define GPIO49_HWUART_RXD	MFP_CFG_IN(GPIO49, AF1)
+#define GPIO50_HWUART_CTS	MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_HWUART_RTS	MFP_CFG_OUT(GPIO51, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1 */
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO32_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO32, AF1)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO32_I2S_SYSCLK	MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_OUT(GPIO24, AF2, DRIVE_LOW)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+
+/* SSP 2 - NSSP */
+#define GPIO81_SSP2_CLK_OUT 	MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO81_SSP2_CLK_IN  	MFP_CFG_IN(GPIO81, AF1)
+#define GPIO82_SSP2_FRM_OUT 	MFP_CFG_OUT(GPIO82, AF1, DRIVE_LOW)
+#define GPIO82_SSP2_FRM_IN  	MFP_CFG_IN(GPIO82, AF1)
+#define GPIO83_SSP2_TXD      	MFP_CFG_OUT(GPIO83, AF1, DRIVE_LOW)
+#define GPIO83_SSP2_RXD      	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_SSP2_TXD      	MFP_CFG_OUT(GPIO84, AF1, DRIVE_LOW)
+#define GPIO84_SSP2_RXD      	MFP_CFG_IN(GPIO84, AF2)
+
+/* MMC */
+#define GPIO6_MMC_CLK		MFP_CFG_OUT(GPIO6, AF1, DRIVE_LOW)
+#define GPIO8_MMC_CS0		MFP_CFG_OUT(GPIO8, AF1, DRIVE_LOW)
+#define GPIO9_MMC_CS1		MFP_CFG_OUT(GPIO9, AF1, DRIVE_LOW)
+#define GPIO34_MMC_CS0		MFP_CFG_OUT(GPIO34, AF2, DRIVE_LOW)
+#define GPIO39_MMC_CS1		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO53_MMC_CLK		MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_MMC_CLK		MFP_CFG_OUT(GPIO54, AF1, DRIVE_LOW)
+#define GPIO69_MMC_CLK		MFP_CFG_OUT(GPIO69, AF1, DRIVE_LOW)
+#define GPIO67_MMC_CS0		MFP_CFG_OUT(GPIO67, AF1, DRIVE_LOW)
+#define GPIO68_MMC_CS1		MFP_CFG_OUT(GPIO68, AF1, DRIVE_LOW)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+
+#endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
new file mode 100644
index 0000000..122bdbd
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa27x.h
@@ -0,0 +1,433 @@
+#ifndef __ASM_ARCH_MFP_PXA27X_H
+#define __ASM_ARCH_MFP_PXA27X_H
+
+/*
+ * NOTE:  for those special-function bidirectional GPIOs, as described
+ * in the "PXA27x Developer's Manual" Section 24.4.2.1, only its input
+ * alternative is preserved, the direction is actually selected by the
+ * specific controller, and this should work in most cases.
+ */
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa2xx.h>
+
+/* GPIO */
+#define GPIO85_GPIO		MFP_CFG_IN(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG_IN(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG_IN(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG_IN(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG_IN(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG_IN(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG_IN(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG_IN(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG_IN(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG_IN(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG_IN(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG_IN(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG_IN(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG_IN(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG_IN(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG_IN(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG_IN(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG_IN(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG_IN(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG_IN(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG_IN(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG_IN(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG_IN(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG_IN(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG_IN(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG_IN(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG_IN(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG_IN(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG_IN(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG_IN(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG_IN(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG_IN(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG_IN(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG_IN(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG_IN(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG_IN(GPIO120, AF0)
+
+/* Crystal and Clock Signals */
+#define GPIO9_HZ_CLK		MFP_CFG_OUT(GPIO9,  AF1, DRIVE_LOW)
+#define GPIO10_HZ_CLK		MFP_CFG_OUT(GPIO10, AF1, DRIVE_LOW)
+#define GPIO11_48_MHz		MFP_CFG_OUT(GPIO11, AF3, DRIVE_LOW)
+#define GPIO12_48_MHz		MFP_CFG_OUT(GPIO12, AF3, DRIVE_LOW)
+#define GPIO13_CLK_EXT		MFP_CFG_IN(GPIO13, AF1)
+
+/* OS Timer Signals */
+#define GPIO11_EXT_SYNC_0	MFP_CFG_IN(GPIO11, AF1)
+#define GPIO12_EXT_SYNC_1	MFP_CFG_IN(GPIO12, AF1)
+#define GPIO9_CHOUT_0		MFP_CFG_OUT(GPIO9,  AF3, DRIVE_LOW)
+#define GPIO10_CHOUT_1		MFP_CFG_OUT(GPIO10, AF3, DRIVE_LOW)
+#define GPIO11_CHOUT_0		MFP_CFG_OUT(GPIO11, AF1, DRIVE_LOW)
+#define GPIO12_CHOUT_1		MFP_CFG_OUT(GPIO12, AF1, DRIVE_LOW)
+
+/* SDRAM and Static Memory I/O Signals */
+#define GPIO20_nSDCS_2		MFP_CFG_OUT(GPIO20, AF1, DRIVE_HIGH)
+#define GPIO21_nSDCS_3		MFP_CFG_OUT(GPIO21, AF1, DRIVE_HIGH)
+#define GPIO15_nCS_1		MFP_CFG_OUT(GPIO15, AF2, DRIVE_HIGH)
+#define GPIO78_nCS_2		MFP_CFG_OUT(GPIO78, AF2, DRIVE_HIGH)
+#define GPIO79_nCS_3		MFP_CFG_OUT(GPIO79, AF2, DRIVE_HIGH)
+#define GPIO80_nCS_4		MFP_CFG_OUT(GPIO80, AF2, DRIVE_HIGH)
+#define GPIO33_nCS_5		MFP_CFG_OUT(GPIO33, AF2, DRIVE_HIGH)
+
+/* Miscellaneous I/O and DMA Signals */
+#define GPIO21_DVAL_0		MFP_CFG_OUT(GPIO21, AF2, DRIVE_HIGH)
+#define GPIO116_DVAL_0		MFP_CFG_OUT(GPIO116, AF1, DRIVE_HIGH)
+#define GPIO33_DVAL_1		MFP_CFG_OUT(GPIO33, AF1, DRIVE_HIGH)
+#define GPIO96_DVAL_1		MFP_CFG_OUT(GPIO96, AF2, DRIVE_HIGH)
+#define GPIO18_RDY		MFP_CFG_IN(GPIO18, AF1)
+#define GPIO20_DREQ_0		MFP_CFG_IN(GPIO20, AF1)
+#define GPIO115_DREQ_0		MFP_CFG_IN(GPIO115, AF1)
+#define GPIO80_DREQ_1		MFP_CFG_IN(GPIO80, AF1)
+#define GPIO97_DREQ_1		MFP_CFG_IN(GPIO97, AF2)
+#define GPIO85_DREQ_2		MFP_CFG_IN(GPIO85, AF2)
+#define GPIO100_DREQ_2		MFP_CFG_IN(GPIO100, AF2)
+
+/* Alternate Bus Master Mode I/O Signals */
+#define GPIO20_MBREQ		MFP_CFG_IN(GPIO20, AF2)
+#define GPIO80_MBREQ		MFP_CFG_IN(GPIO80, AF2)
+#define GPIO96_MBREQ		MFP_CFG_IN(GPIO96, AF2)
+#define GPIO115_MBREQ		MFP_CFG_IN(GPIO115, AF3)
+#define GPIO21_MBGNT		MFP_CFG_OUT(GPIO21, AF3, DRIVE_LOW)
+#define GPIO33_MBGNT		MFP_CFG_OUT(GPIO33, AF3, DRIVE_LOW)
+#define GPIO97_MBGNT		MFP_CFG_OUT(GPIO97, AF2, DRIVE_LOW)
+#define GPIO116_MBGNT		MFP_CFG_OUT(GPIO116, AF3, DRIVE_LOW)
+
+/* PC CARD */
+#define GPIO15_nPCE_1		MFP_CFG_OUT(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO85_nPCE_1		MFP_CFG_OUT(GPIO85, AF1, DRIVE_HIGH)
+#define GPIO86_nPCE_1		MFP_CFG_OUT(GPIO86, AF1, DRIVE_HIGH)
+#define GPIO102_nPCE_1		MFP_CFG_OUT(GPIO102, AF1, DRIVE_HIGH)
+#define GPIO54_nPCE_2		MFP_CFG_OUT(GPIO54, AF2, DRIVE_HIGH)
+#define GPIO78_nPCE_2		MFP_CFG_OUT(GPIO78, AF1, DRIVE_HIGH)
+#define GPIO87_nPCE_2		MFP_CFG_IN(GPIO87, AF1)
+#define GPIO55_nPREG		MFP_CFG_OUT(GPIO55, AF2, DRIVE_HIGH)
+#define GPIO50_nPIOR		MFP_CFG_OUT(GPIO50, AF2, DRIVE_HIGH)
+#define GPIO51_nPIOW		MFP_CFG_OUT(GPIO51, AF2, DRIVE_HIGH)
+#define GPIO49_nPWE		MFP_CFG_OUT(GPIO49, AF2, DRIVE_HIGH)
+#define GPIO48_nPOE		MFP_CFG_OUT(GPIO48, AF2, DRIVE_HIGH)
+#define GPIO57_nIOIS16		MFP_CFG_IN(GPIO57, AF1)
+#define GPIO56_nPWAIT		MFP_CFG_IN(GPIO56, AF1)
+#define GPIO79_PSKTSEL		MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH)
+#define GPIO104_PSKTSEL		MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH)
+
+/* I2C */
+#define GPIO117_I2C_SCL		MFP_CFG_IN(GPIO117, AF1)
+#define GPIO118_I2C_SDA		MFP_CFG_IN(GPIO118, AF1)
+
+/* FFUART */
+#define GPIO9_FFUART_CTS	MFP_CFG_IN(GPIO9, AF3)
+#define GPIO26_FFUART_CTS	MFP_CFG_IN(GPIO26, AF3)
+#define GPIO35_FFUART_CTS	MFP_CFG_IN(GPIO35, AF1)
+#define GPIO100_FFUART_CTS	MFP_CFG_IN(GPIO100, AF3)
+#define GPIO10_FFUART_DCD	MFP_CFG_IN(GPIO10, AF1)
+#define GPIO36_FFUART_DCD	MFP_CFG_IN(GPIO36, AF1)
+#define GPIO33_FFUART_DSR	MFP_CFG_IN(GPIO33, AF2)
+#define GPIO37_FFUART_DSR	MFP_CFG_IN(GPIO37, AF1)
+#define GPIO38_FFUART_RI	MFP_CFG_IN(GPIO38, AF1)
+#define GPIO89_FFUART_RI	MFP_CFG_IN(GPIO89, AF3)
+#define GPIO19_FFUART_RXD	MFP_CFG_IN(GPIO19, AF3)
+#define GPIO33_FFUART_RXD	MFP_CFG_IN(GPIO33, AF1)
+#define GPIO34_FFUART_RXD	MFP_CFG_IN(GPIO34, AF1)
+#define GPIO41_FFUART_RXD	MFP_CFG_IN(GPIO41, AF1)
+#define GPIO53_FFUART_RXD	MFP_CFG_IN(GPIO53, AF1)
+#define GPIO85_FFUART_RXD	MFP_CFG_IN(GPIO85, AF1)
+#define GPIO96_FFUART_RXD	MFP_CFG_IN(GPIO96, AF3)
+#define GPIO102_FFUART_RXD	MFP_CFG_IN(GPIO102, AF3)
+#define GPIO16_FFUART_TXD	MFP_CFG_OUT(GPIO16, AF3, DRIVE_HIGH)
+#define GPIO37_FFUART_TXD	MFP_CFG_OUT(GPIO37, AF3, DRIVE_HIGH)
+#define GPIO39_FFUART_TXD	MFP_CFG_OUT(GPIO39, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_TXD	MFP_CFG_OUT(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO99_FFUART_TXD	MFP_CFG_OUT(GPIO99, AF3, DRIVE_HIGH)
+#define GPIO27_FFUART_RTS	MFP_CFG_OUT(GPIO27, AF3, DRIVE_HIGH)
+#define GPIO41_FFUART_RTS	MFP_CFG_OUT(GPIO41, AF2, DRIVE_HIGH)
+#define GPIO83_FFUART_RTS	MFP_CFG_OUT(GPIO83, AF3, DRIVE_HIGH)
+#define GPIO98_FFUART_RTS	MFP_CFG_OUT(GPIO98, AF3, DRIVE_HIGH)
+#define GPIO40_FFUART_DTR	MFP_CFG_OUT(GPIO40, AF2, DRIVE_HIGH)
+#define GPIO82_FFUART_DTR	MFP_CFG_OUT(GPIO82, AF3, DRIVE_HIGH)
+
+/* BTUART */
+#define GPIO44_BTUART_CTS	MFP_CFG_IN(GPIO44, AF1)
+#define GPIO42_BTUART_RXD	MFP_CFG_IN(GPIO42, AF1)
+#define GPIO45_BTUART_RTS	MFP_CFG_OUT(GPIO45, AF2, DRIVE_HIGH)
+#define GPIO43_BTUART_TXD	MFP_CFG_OUT(GPIO43, AF2, DRIVE_HIGH)
+
+/* STUART */
+#define GPIO46_STUART_RXD	MFP_CFG_IN(GPIO46, AF2)
+#define GPIO47_STUART_TXD	MFP_CFG_OUT(GPIO47, AF1, DRIVE_HIGH)
+
+/* FICP */
+#define GPIO42_FICP_RXD		MFP_CFG_IN(GPIO42, AF2)
+#define GPIO46_FICP_RXD		MFP_CFG_IN(GPIO46, AF1)
+#define GPIO43_FICP_TXD		MFP_CFG_OUT(GPIO43, AF1, DRIVE_HIGH)
+#define GPIO47_FICP_TXD		MFP_CFG_OUT(GPIO47, AF2, DRIVE_HIGH)
+
+/* PWM 0/1/2/3 */
+#define GPIO11_PWM2_OUT		MFP_CFG_OUT(GPIO11, AF2, DRIVE_LOW)
+#define GPIO12_PWM3_OUT		MFP_CFG_OUT(GPIO12, AF2, DRIVE_LOW)
+#define GPIO16_PWM0_OUT		MFP_CFG_OUT(GPIO16, AF2, DRIVE_LOW)
+#define GPIO17_PWM1_OUT		MFP_CFG_OUT(GPIO17, AF2, DRIVE_LOW)
+#define GPIO38_PWM1_OUT		MFP_CFG_OUT(GPIO38, AF3, DRIVE_LOW)
+#define GPIO46_PWM2_OUT		MFP_CFG_OUT(GPIO46, AF2, DRIVE_LOW)
+#define GPIO47_PWM3_OUT		MFP_CFG_OUT(GPIO47, AF3, DRIVE_LOW)
+#define GPIO79_PWM2_OUT		MFP_CFG_OUT(GPIO79, AF3, DRIVE_LOW)
+#define GPIO80_PWM3_OUT		MFP_CFG_OUT(GPIO80, AF3, DRIVE_LOW)
+#define GPIO115_PWM1_OUT	MFP_CFG_OUT(GPIO115, AF3, DRIVE_LOW)
+
+/* AC97 */
+#define GPIO31_AC97_SYNC	MFP_CFG_OUT(GPIO31, AF2, DRIVE_LOW)
+#define GPIO94_AC97_SYNC	MFP_CFG_OUT(GPIO94, AF1, DRIVE_LOW)
+#define GPIO30_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF2, DRIVE_LOW)
+#define GPIO93_AC97_SDATA_OUT	MFP_CFG_OUT(GPIO93, AF1, DRIVE_LOW)
+#define GPIO45_AC97_SYSCLK	MFP_CFG_OUT(GPIO45, AF1, DRIVE_LOW)
+#define GPIO89_AC97_SYSCLK	MFP_CFG_OUT(GPIO89, AF1, DRIVE_LOW)
+#define GPIO98_AC97_SYSCLK	MFP_CFG_OUT(GPIO98, AF1, DRIVE_LOW)
+#define GPIO95_AC97_nRESET	MFP_CFG_OUT(GPIO95, AF1, DRIVE_LOW)
+#define GPIO113_AC97_nRESET	MFP_CFG_OUT(GPIO113, AF2, DRIVE_LOW)
+#define GPIO28_AC97_BITCLK	MFP_CFG_IN(GPIO28, AF1)
+#define GPIO29_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO29, AF1)
+#define GPIO116_AC97_SDATA_IN_0	MFP_CFG_IN(GPIO116, AF2)
+#define GPIO99_AC97_SDATA_IN_1	MFP_CFG_IN(GPIO99, AF2)
+
+/* I2S */
+#define GPIO28_I2S_BITCLK_IN	MFP_CFG_IN(GPIO28, AF2)
+#define GPIO28_I2S_BITCLK_OUT	MFP_CFG_OUT(GPIO28, AF1, DRIVE_LOW)
+#define GPIO29_I2S_SDATA_IN	MFP_CFG_IN(GPIO29, AF2)
+#define GPIO30_I2S_SDATA_OUT	MFP_CFG_OUT(GPIO30, AF1, DRIVE_LOW)
+#define GPIO31_I2S_SYNC		MFP_CFG_OUT(GPIO31, AF1, DRIVE_LOW)
+#define GPIO113_I2S_SYSCLK	MFP_CFG_OUT(GPIO113, AF1, DRIVE_LOW)
+
+/* SSP 1 */
+#define GPIO23_SSP1_SCLK	MFP_CFG_OUT(GPIO23, AF2, DRIVE_LOW)
+#define GPIO29_SSP1_SCLK	MFP_CFG_IN(GPIO29, AF3)
+#define GPIO27_SSP1_SYSCLK	MFP_CFG_OUT(GPIO27, AF1, DRIVE_LOW)
+#define GPIO53_SSP1_SYSCLK	MFP_CFG_OUT(GPIO53, AF3, DRIVE_LOW)
+#define GPIO24_SSP1_SFRM	MFP_CFG_IN(GPIO24, AF2)
+#define GPIO28_SSP1_SFRM	MFP_CFG_IN(GPIO28, AF3)
+#define GPIO25_SSP1_TXD		MFP_CFG_OUT(GPIO25, AF2, DRIVE_LOW)
+#define GPIO57_SSP1_TXD		MFP_CFG_OUT(GPIO57, AF3, DRIVE_LOW)
+#define GPIO26_SSP1_RXD		MFP_CFG_IN(GPIO26, AF1)
+#define GPIO27_SSP1_SCLKEN	MFP_CFG_IN(GPIO27, AF2)
+
+/* SSP 2 */
+#define GPIO19_SSP2_SCLK	MFP_CFG_IN(GPIO19, AF1)
+#define GPIO22_SSP2_SCLK	MFP_CFG_IN(GPIO22, AF3)
+#define GPIO29_SSP2_SCLK	MFP_CFG_OUT(GPIO29, AF3, DRIVE_LOW)
+#define GPIO36_SSP2_SCLK	MFP_CFG_IN(GPIO36, AF2)
+#define GPIO50_SSP2_SCLK	MFP_CFG_IN(GPIO50, AF3)
+#define GPIO22_SSP2_SYSCLK	MFP_CFG_OUT(GPIO22, AF2, DRIVE_LOW)
+#define GPIO14_SSP2_SFRM	MFP_CFG_IN(GPIO14, AF2)
+#define GPIO37_SSP2_SFRM	MFP_CFG_IN(GPIO37, AF2)
+#define GPIO87_SSP2_SFRM	MFP_CFG_OUT(GPIO87, AF3, DRIVE_LOW)
+#define GPIO88_SSP2_SFRM	MFP_CFG_IN(GPIO88, AF3)
+#define GPIO13_SSP2_TXD		MFP_CFG_OUT(GPIO13, AF1, DRIVE_LOW)
+#define GPIO38_SSP2_TXD		MFP_CFG_OUT(GPIO38, AF2, DRIVE_LOW)
+#define GPIO87_SSP2_TXD		MFP_CFG_OUT(GPIO87, AF1, DRIVE_LOW)
+#define GPIO89_SSP2_TXD		MFP_CFG_OUT(GPIO89, AF3, DRIVE_LOW)
+#define GPIO11_SSP2_RXD		MFP_CFG_IN(GPIO11, AF2)
+#define GPIO29_SSP2_RXD		MFP_CFG_OUT(GPIO29, AF1, DRIVE_LOW)
+#define GPIO40_SSP2_RXD		MFP_CFG_IN(GPIO40, AF1)
+#define GPIO86_SSP2_RXD		MFP_CFG_IN(GPIO86, AF1)
+#define GPIO88_SSP2_RXD		MFP_CFG_IN(GPIO88, AF2)
+#define GPIO22_SSP2_EXTCLK	MFP_CFG_IN(GPIO22, AF1)
+#define GPIO27_SSP2_EXTCLK	MFP_CFG_IN(GPIO27, AF1)
+#define GPIO22_SSP2_SCLKEN	MFP_CFG_IN(GPIO22, AF2)
+#define GPIO23_SSP2_SCLKEN	MFP_CFG_IN(GPIO23, AF2)
+
+/* SSP 3 */
+#define GPIO34_SSP3_SCLK	MFP_CFG_IN(GPIO34, AF3)
+#define GPIO40_SSP3_SCLK	MFP_CFG_OUT(GPIO40, AF3, DRIVE_LOW)
+#define GPIO52_SSP3_SCLK	MFP_CFG_IN(GPIO52, AF2)
+#define GPIO84_SSP3_SCLK	MFP_CFG_IN(GPIO84, AF1)
+#define GPIO45_SSP3_SYSCLK	MFP_CFG_OUT(GPIO45, AF3, DRIVE_LOW)
+#define GPIO35_SSP3_SFRM	MFP_CFG_IN(GPIO35, AF3)
+#define GPIO39_SSP3_SFRM	MFP_CFG_IN(GPIO39, AF3)
+#define GPIO83_SSP3_SFRM	MFP_CFG_IN(GPIO83, AF1)
+#define GPIO35_SSP3_TXD		MFP_CFG_OUT(GPIO35, AF3, DRIVE_LOW)
+#define GPIO38_SSP3_TXD		MFP_CFG_OUT(GPIO38, AF1, DRIVE_LOW)
+#define GPIO81_SSP3_TXD		MFP_CFG_OUT(GPIO81, AF1, DRIVE_LOW)
+#define GPIO41_SSP3_RXD		MFP_CFG_IN(GPIO41, AF3)
+#define GPIO82_SSP3_RXD		MFP_CFG_IN(GPIO82, AF1)
+#define GPIO89_SSP3_RXD		MFP_CFG_IN(GPIO89, AF1)
+
+/* MMC */
+#define GPIO32_MMC_CLK		MFP_CFG_OUT(GPIO32, AF2, DRIVE_LOW)
+#define GPIO92_MMC_DAT_0	MFP_CFG_IN(GPIO92, AF1)
+#define GPIO109_MMC_DAT_1	MFP_CFG_IN(GPIO109, AF1)
+#define GPIO110_MMC_DAT_2	MFP_CFG_IN(GPIO110, AF1)
+#define GPIO111_MMC_DAT_3	MFP_CFG_IN(GPIO111, AF1)
+#define GPIO112_MMC_CMD		MFP_CFG_IN(GPIO112, AF1)
+
+/* LCD */
+#define GPIO58_LCD_LDD_0	MFP_CFG_OUT(GPIO58, AF2, DRIVE_LOW)
+#define GPIO59_LCD_LDD_1	MFP_CFG_OUT(GPIO59, AF2, DRIVE_LOW)
+#define GPIO60_LCD_LDD_2	MFP_CFG_OUT(GPIO60, AF2, DRIVE_LOW)
+#define GPIO61_LCD_LDD_3	MFP_CFG_OUT(GPIO61, AF2, DRIVE_LOW)
+#define GPIO62_LCD_LDD_4	MFP_CFG_OUT(GPIO62, AF2, DRIVE_LOW)
+#define GPIO63_LCD_LDD_5	MFP_CFG_OUT(GPIO63, AF2, DRIVE_LOW)
+#define GPIO64_LCD_LDD_6	MFP_CFG_OUT(GPIO64, AF2, DRIVE_LOW)
+#define GPIO65_LCD_LDD_7	MFP_CFG_OUT(GPIO65, AF2, DRIVE_LOW)
+#define GPIO66_LCD_LDD_8	MFP_CFG_OUT(GPIO66, AF2, DRIVE_LOW)
+#define GPIO67_LCD_LDD_9	MFP_CFG_OUT(GPIO67, AF2, DRIVE_LOW)
+#define GPIO68_LCD_LDD_10	MFP_CFG_OUT(GPIO68, AF2, DRIVE_LOW)
+#define GPIO69_LCD_LDD_11	MFP_CFG_OUT(GPIO69, AF2, DRIVE_LOW)
+#define GPIO70_LCD_LDD_12	MFP_CFG_OUT(GPIO70, AF2, DRIVE_LOW)
+#define GPIO71_LCD_LDD_13	MFP_CFG_OUT(GPIO71, AF2, DRIVE_LOW)
+#define GPIO72_LCD_LDD_14	MFP_CFG_OUT(GPIO72, AF2, DRIVE_LOW)
+#define GPIO73_LCD_LDD_15	MFP_CFG_OUT(GPIO73, AF2, DRIVE_LOW)
+#define GPIO86_LCD_LDD_16	MFP_CFG_OUT(GPIO86, AF2, DRIVE_LOW)
+#define GPIO87_LCD_LDD_17	MFP_CFG_OUT(GPIO87, AF2, DRIVE_LOW)
+#define GPIO74_LCD_FCLK		MFP_CFG_OUT(GPIO74, AF2, DRIVE_LOW)
+#define GPIO75_LCD_LCLK		MFP_CFG_OUT(GPIO75, AF2, DRIVE_LOW)
+#define GPIO76_LCD_PCLK		MFP_CFG_OUT(GPIO76, AF2, DRIVE_LOW)
+#define GPIO77_LCD_BIAS		MFP_CFG_OUT(GPIO77, AF2, DRIVE_LOW)
+#define GPIO14_LCD_VSYNC	MFP_CFG_IN(GPIO14, AF1)
+#define GPIO19_LCD_CS		MFP_CFG_OUT(GPIO19, AF2, DRIVE_LOW)
+
+/* Keypad */
+#define GPIO93_KP_DKIN_0	MFP_CFG_IN(GPIO93, AF1)
+#define GPIO94_KP_DKIN_1	MFP_CFG_IN(GPIO94, AF1)
+#define GPIO95_KP_DKIN_2	MFP_CFG_IN(GPIO95, AF1)
+#define GPIO96_KP_DKIN_3	MFP_CFG_IN(GPIO96, AF1)
+#define GPIO97_KP_DKIN_4	MFP_CFG_IN(GPIO97, AF1)
+#define GPIO98_KP_DKIN_5	MFP_CFG_IN(GPIO98, AF1)
+#define GPIO99_KP_DKIN_6	MFP_CFG_IN(GPIO99, AF1)
+#define GPIO13_KP_KDIN_7	MFP_CFG_IN(GPIO13, AF2)
+#define GPIO100_KP_MKIN_0	MFP_CFG_IN(GPIO100, AF1)
+#define GPIO101_KP_MKIN_1	MFP_CFG_IN(GPIO101, AF1)
+#define GPIO102_KP_MKIN_2	MFP_CFG_IN(GPIO102, AF1)
+#define GPIO34_KP_MKIN_3	MFP_CFG_IN(GPIO34, AF2)
+#define GPIO37_KP_MKIN_3	MFP_CFG_IN(GPIO37, AF3)
+#define GPIO97_KP_MKIN_3	MFP_CFG_IN(GPIO97, AF3)
+#define GPIO98_KP_MKIN_4	MFP_CFG_IN(GPIO98, AF3)
+#define GPIO38_KP_MKIN_4	MFP_CFG_IN(GPIO38, AF2)
+#define GPIO39_KP_MKIN_4	MFP_CFG_IN(GPIO39, AF1)
+#define GPIO16_KP_MKIN_5	MFP_CFG_IN(GPIO16, AF1)
+#define GPIO90_KP_MKIN_5	MFP_CFG_IN(GPIO90, AF1)
+#define GPIO99_KP_MKIN_5	MFP_CFG_IN(GPIO99, AF3)
+#define GPIO17_KP_MKIN_6	MFP_CFG_IN(GPIO17, AF1)
+#define GPIO91_KP_MKIN_6	MFP_CFG_IN(GPIO91, AF1)
+#define GPIO95_KP_MKIN_6	MFP_CFG_IN(GPIO95, AF3)
+#define GPIO13_KP_MKIN_7	MFP_CFG_IN(GPIO13, AF3)
+#define GPIO36_KP_MKIN_7	MFP_CFG_IN(GPIO36, AF3)
+#define GPIO103_KP_MKOUT_0	MFP_CFG_OUT(GPIO103, AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_1	MFP_CFG_OUT(GPIO104, AF2, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_2	MFP_CFG_OUT(GPIO105, AF2, DRIVE_HIGH)
+#define GPIO106_KP_MKOUT_3	MFP_CFG_OUT(GPIO106, AF2, DRIVE_HIGH)
+#define GPIO107_KP_MKOUT_4	MFP_CFG_OUT(GPIO107, AF2, DRIVE_HIGH)
+#define GPIO108_KP_MKOUT_5	MFP_CFG_OUT(GPIO108, AF2, DRIVE_HIGH)
+#define GPIO35_KP_MKOUT_6	MFP_CFG_OUT(GPIO35, AF2, DRIVE_HIGH)
+#define GPIO22_KP_MKOUT_7	MFP_CFG_OUT(GPIO22, AF1, DRIVE_HIGH)
+#define GPIO40_KP_MKOUT_6	MFP_CFG_OUT(GPIO40, AF1, DRIVE_HIGH)
+#define GPIO41_KP_MKOUT_7	MFP_CFG_OUT(GPIO41, AF1, DRIVE_HIGH)
+#define GPIO96_KP_MKOUT_6	MFP_CFG_OUT(GPIO96, AF3, DRIVE_HIGH)
+
+/* USB P3 */
+#define GPIO10_USB_P3_5		MFP_CFG_IN(GPIO10, AF3)
+#define GPIO11_USB_P3_1		MFP_CFG_IN(GPIO11, AF3)
+#define GPIO30_USB_P3_2		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
+#define GPIO31_USB_P3_6		MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
+#define GPIO56_USB_P3_4		MFP_CFG_OUT(GPIO56, AF1, DRIVE_LOW)
+#define GPIO86_USB_P3_5		MFP_CFG_IN(GPIO86, AF3)
+#define GPIO87_USB_P3_1		MFP_CFG_IN(GPIO87, AF3)
+#define GPIO90_USB_P3_5		MFP_CFG_IN(GPIO90, AF2)
+#define GPIO91_USB_P3_1		MFP_CFG_IN(GPIO91, AF2)
+#define GPIO113_USB_P3_3	MFP_CFG_IN(GPIO113, AF3)
+
+/* USB P2 */
+#define GPIO34_USB_P2_2		MFP_CFG_OUT(GPIO34, AF1, DRIVE_LOW)
+#define GPIO35_USB_P2_1		MFP_CFG_IN(GPIO35, AF2)
+#define GPIO36_USB_P2_4		MFP_CFG_OUT(GPIO36, AF1, DRIVE_LOW)
+#define GPIO37_USB_P2_8		MFP_CFG_OUT(GPIO37, AF1, DRIVE_LOW)
+#define GPIO38_USB_P2_3		MFP_CFG_IN(GPIO38, AF3)
+#define GPIO39_USB_P2_6		MFP_CFG_OUT(GPIO39, AF1, DRIVE_LOW)
+#define GPIO40_USB_P2_5		MFP_CFG_IN(GPIO40, AF3)
+#define GPIO41_USB_P2_7		MFP_CFG_IN(GPIO41, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG_IN(GPIO53, AF2)
+
+/* USB Host Port 1/2 */
+#define GPIO88_USBH1_PWR	MFP_CFG_IN(GPIO88, AF1)
+#define GPIO89_USBH1_PEN	MFP_CFG_OUT(GPIO89, AF2, DRIVE_LOW)
+#define GPIO119_USBH2_PWR	MFP_CFG_IN(GPIO119, AF1)
+#define GPIO120_USBH2_PEN	MFP_CFG_OUT(GPIO120, AF2, DRIVE_LOW)
+
+/* QCI - default to Master Mode: CIF_FV/CIF_LV Direction In */
+#define GPIO115_CIF_DD_3	MFP_CFG_IN(GPIO115, AF2)
+#define GPIO116_CIF_DD_2	MFP_CFG_IN(GPIO116, AF1)
+#define GPIO12_CIF_DD_7		MFP_CFG_IN(GPIO12, AF2)
+#define GPIO17_CIF_DD_6		MFP_CFG_IN(GPIO17, AF2)
+#define GPIO23_CIF_MCLK		MFP_CFG_OUT(GPIO23, AF1, DRIVE_LOW)
+#define GPIO24_CIF_FV		MFP_CFG_IN(GPIO24, AF1)
+#define GPIO25_CIF_LV		MFP_CFG_IN(GPIO25, AF1)
+#define GPIO26_CIF_PCLK		MFP_CFG_IN(GPIO26, AF2)
+#define GPIO27_CIF_DD_0		MFP_CFG_IN(GPIO27, AF3)
+#define GPIO42_CIF_MCLK		MFP_CFG_OUT(GPIO42, AF3, DRIVE_LOW)
+#define GPIO43_CIF_FV		MFP_CFG_IN(GPIO43, AF3)
+#define GPIO44_CIF_LV		MFP_CFG_IN(GPIO44, AF3)
+#define GPIO45_CIF_PCLK		MFP_CFG_IN(GPIO45, AF3)
+#define GPIO47_CIF_DD_0		MFP_CFG_IN(GPIO47, AF1)
+#define GPIO48_CIF_DD_5		MFP_CFG_IN(GPIO48, AF1)
+#define GPIO50_CIF_DD_3		MFP_CFG_IN(GPIO50, AF1)
+#define GPIO51_CIF_DD_2		MFP_CFG_IN(GPIO51, AF1)
+#define GPIO52_CIF_DD_4		MFP_CFG_IN(GPIO52, AF1)
+#define GPIO53_CIF_MCLK		MFP_CFG_OUT(GPIO53, AF2, DRIVE_LOW)
+#define GPIO54_CIF_PCLK		MFP_CFG_IN(GPIO54, AF3)
+#define GPIO55_CIF_DD_1		MFP_CFG_IN(GPIO55, AF1)
+#define GPIO81_CIF_DD_0		MFP_CFG_IN(GPIO81, AF2)
+#define GPIO82_CIF_DD_5		MFP_CFG_IN(GPIO82, AF3)
+#define GPIO83_CIF_DD_4		MFP_CFG_IN(GPIO83, AF3)
+#define GPIO84_CIF_FV		MFP_CFG_IN(GPIO84, AF3)
+#define GPIO85_CIF_LV		MFP_CFG_IN(GPIO85, AF3)
+#define GPIO90_CIF_DD_4		MFP_CFG_IN(GPIO90, AF3)
+#define GPIO91_CIF_DD_5		MFP_CFG_IN(GPIO91, AF3)
+#define GPIO93_CIF_DD_6		MFP_CFG_IN(GPIO93, AF2)
+#define GPIO94_CIF_DD_5		MFP_CFG_IN(GPIO94, AF2)
+#define GPIO95_CIF_DD_4		MFP_CFG_IN(GPIO95, AF2)
+#define GPIO98_CIF_DD_0		MFP_CFG_IN(GPIO98, AF2)
+#define GPIO103_CIF_DD_3	MFP_CFG_IN(GPIO103, AF1)
+#define GPIO104_CIF_DD_2	MFP_CFG_IN(GPIO104, AF1)
+#define GPIO105_CIF_DD_1	MFP_CFG_IN(GPIO105, AF1)
+#define GPIO106_CIF_DD_9	MFP_CFG_IN(GPIO106, AF1)
+#define GPIO107_CIF_DD_8	MFP_CFG_IN(GPIO107, AF1)
+#define GPIO108_CIF_DD_7	MFP_CFG_IN(GPIO108, AF1)
+#define GPIO114_CIF_DD_1	MFP_CFG_IN(GPIO114, AF1)
+
+/* Universal Subscriber ID Interface */
+#define GPIO114_UVS0		MFP_CFG_OUT(GPIO114, AF2, DRIVE_LOW)
+#define GPIO115_nUVS1		MFP_CFG_OUT(GPIO115, AF2, DRIVE_LOW)
+#define GPIO116_nUVS2		MFP_CFG_OUT(GPIO116, AF2, DRIVE_LOW)
+#define GPIO14_UCLK		MFP_CFG_OUT(GPIO14, AF3, DRIVE_LOW)
+#define GPIO91_UCLK		MFP_CFG_OUT(GPIO91, AF2, DRIVE_LOW)
+#define GPIO19_nURST		MFP_CFG_OUT(GPIO19, AF3, DRIVE_LOW)
+#define GPIO90_nURST		MFP_CFG_OUT(GPIO90, AF2, DRIVE_LOW)
+#define GPIO116_UDET		MFP_CFG_IN(GPIO116, AF3)
+#define GPIO114_UEN		MFP_CFG_OUT(GPIO114, AF1, DRIVE_LOW)
+#define GPIO115_UEN		MFP_CFG_OUT(GPIO115, AF1, DRIVE_LOW)
+
+/* Mobile Scalable Link (MSL) Interface */
+#define GPIO81_BB_OB_DAT_0	MFP_CFG_OUT(GPIO81, AF2, DRIVE_LOW)
+#define GPIO48_BB_OB_DAT_1	MFP_CFG_OUT(GPIO48, AF1, DRIVE_LOW)
+#define GPIO50_BB_OB_DAT_2	MFP_CFG_OUT(GPIO50, AF1, DRIVE_LOW)
+#define GPIO51_BB_OB_DAT_3	MFP_CFG_OUT(GPIO51, AF1, DRIVE_LOW)
+#define GPIO52_BB_OB_CLK	MFP_CFG_OUT(GPIO52, AF1, DRIVE_LOW)
+#define GPIO53_BB_OB_STB	MFP_CFG_OUT(GPIO53, AF1, DRIVE_LOW)
+#define GPIO54_BB_OB_WAIT	MFP_CFG_IN(GPIO54, AF2)
+#define GPIO82_BB_IB_DAT_0	MFP_CFG_IN(GPIO82, AF2)
+#define GPIO55_BB_IB_DAT_1	MFP_CFG_IN(GPIO55, AF2)
+#define GPIO56_BB_IB_DAT_2	MFP_CFG_IN(GPIO56, AF2)
+#define GPIO57_BB_IB_DAT_3	MFP_CFG_IN(GPIO57, AF2)
+#define GPIO83_BB_IB_CLK	MFP_CFG_IN(GPIO83, AF2)
+#define GPIO84_BB_IB_STB	MFP_CFG_IN(GPIO84, AF2)
+#define GPIO85_BB_IB_WAIT	MFP_CFG_OUT(GPIO85, AF2, DRIVE_LOW)
+
+/* Memory Stick Host Controller */
+#define GPIO92_MSBS		MFP_CFG_OUT(GPIO92, AF2, DRIVE_LOW)
+#define GPIO109_MSSDIO		MFP_CFG_IN(GPIO109, AF2)
+#define GPIO112_nMSINS		MFP_CFG_IN(GPIO112, AF2)
+#define GPIO32_MSSCLK		MFP_CFG_OUT(GPIO32, AF1, DRIVE_LOW)
+
+extern int keypad_set_wake(unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA27X_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
new file mode 100644
index 0000000..3e92115
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa2xx.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_ARCH_MFP_PXA2XX_H
+#define __ASM_ARCH_MFP_PXA2XX_H
+
+#include <mach/mfp.h>
+
+/*
+ * the following MFP_xxx bit definitions in mfp.h are re-used for pxa2xx:
+ *
+ *  MFP_PIN(x)
+ *  MFP_AFx
+ *  MFP_LPM_DRIVE_{LOW, HIGH}
+ *  MFP_LPM_EDGE_x
+ *
+ * other MFP_x bit definitions will be ignored
+ *
+ * and adds the below two bits specifically for pxa2xx:
+ *
+ * bit     23 - Input/Output (PXA2xx specific)
+ * bit     24 - Wakeup Enable(PXA2xx specific)
+ */
+
+#define MFP_DIR_IN		(0x0 << 23)
+#define MFP_DIR_OUT		(0x1 << 23)
+#define MFP_DIR_MASK		(0x1 << 23)
+#define MFP_DIR(x)		(((x) >> 23) & 0x1)
+
+#define MFP_LPM_CAN_WAKEUP	(0x1 << 24)
+#define WAKEUP_ON_EDGE_RISE	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_RISE)
+#define WAKEUP_ON_EDGE_FALL	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_FALL)
+#define WAKEUP_ON_EDGE_BOTH	(MFP_LPM_CAN_WAKEUP | MFP_LPM_EDGE_BOTH)
+
+/* specifically for enabling wakeup on keypad GPIOs */
+#define WAKEUP_ON_LEVEL_HIGH	(MFP_LPM_CAN_WAKEUP)
+
+#define MFP_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_IN))
+
+/* NOTE:  pins configured as output _must_ provide a low power state,
+ * and this state should help to minimize the power dissipation.
+ */
+#define MFP_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Common configurations for pxa25x and pxa27x
+ *
+ * Note: pins configured as GPIO are always initialized to input
+ * so not to cause any side effect
+ */
+#define GPIO0_GPIO	MFP_CFG_IN(GPIO0, AF0)
+#define GPIO1_GPIO	MFP_CFG_IN(GPIO1, AF0)
+#define GPIO9_GPIO	MFP_CFG_IN(GPIO9, AF0)
+#define GPIO10_GPIO	MFP_CFG_IN(GPIO10, AF0)
+#define GPIO11_GPIO	MFP_CFG_IN(GPIO11, AF0)
+#define GPIO12_GPIO	MFP_CFG_IN(GPIO12, AF0)
+#define GPIO13_GPIO	MFP_CFG_IN(GPIO13, AF0)
+#define GPIO14_GPIO	MFP_CFG_IN(GPIO14, AF0)
+#define GPIO15_GPIO	MFP_CFG_IN(GPIO15, AF0)
+#define GPIO16_GPIO	MFP_CFG_IN(GPIO16, AF0)
+#define GPIO17_GPIO	MFP_CFG_IN(GPIO17, AF0)
+#define GPIO18_GPIO	MFP_CFG_IN(GPIO18, AF0)
+#define GPIO19_GPIO	MFP_CFG_IN(GPIO19, AF0)
+#define GPIO20_GPIO	MFP_CFG_IN(GPIO20, AF0)
+#define GPIO21_GPIO	MFP_CFG_IN(GPIO21, AF0)
+#define GPIO22_GPIO	MFP_CFG_IN(GPIO22, AF0)
+#define GPIO23_GPIO	MFP_CFG_IN(GPIO23, AF0)
+#define GPIO24_GPIO	MFP_CFG_IN(GPIO24, AF0)
+#define GPIO25_GPIO	MFP_CFG_IN(GPIO25, AF0)
+#define GPIO26_GPIO	MFP_CFG_IN(GPIO26, AF0)
+#define GPIO27_GPIO	MFP_CFG_IN(GPIO27, AF0)
+#define GPIO28_GPIO	MFP_CFG_IN(GPIO28, AF0)
+#define GPIO29_GPIO	MFP_CFG_IN(GPIO29, AF0)
+#define GPIO30_GPIO	MFP_CFG_IN(GPIO30, AF0)
+#define GPIO31_GPIO	MFP_CFG_IN(GPIO31, AF0)
+#define GPIO32_GPIO	MFP_CFG_IN(GPIO32, AF0)
+#define GPIO33_GPIO	MFP_CFG_IN(GPIO33, AF0)
+#define GPIO34_GPIO	MFP_CFG_IN(GPIO34, AF0)
+#define GPIO35_GPIO	MFP_CFG_IN(GPIO35, AF0)
+#define GPIO36_GPIO	MFP_CFG_IN(GPIO36, AF0)
+#define GPIO37_GPIO	MFP_CFG_IN(GPIO37, AF0)
+#define GPIO38_GPIO	MFP_CFG_IN(GPIO38, AF0)
+#define GPIO39_GPIO	MFP_CFG_IN(GPIO39, AF0)
+#define GPIO40_GPIO	MFP_CFG_IN(GPIO40, AF0)
+#define GPIO41_GPIO	MFP_CFG_IN(GPIO41, AF0)
+#define GPIO42_GPIO	MFP_CFG_IN(GPIO42, AF0)
+#define GPIO43_GPIO	MFP_CFG_IN(GPIO43, AF0)
+#define GPIO44_GPIO	MFP_CFG_IN(GPIO44, AF0)
+#define GPIO45_GPIO	MFP_CFG_IN(GPIO45, AF0)
+#define GPIO46_GPIO	MFP_CFG_IN(GPIO46, AF0)
+#define GPIO47_GPIO	MFP_CFG_IN(GPIO47, AF0)
+#define GPIO48_GPIO	MFP_CFG_IN(GPIO48, AF0)
+#define GPIO49_GPIO	MFP_CFG_IN(GPIO49, AF0)
+#define GPIO50_GPIO	MFP_CFG_IN(GPIO50, AF0)
+#define GPIO51_GPIO	MFP_CFG_IN(GPIO51, AF0)
+#define GPIO52_GPIO	MFP_CFG_IN(GPIO52, AF0)
+#define GPIO53_GPIO	MFP_CFG_IN(GPIO53, AF0)
+#define GPIO54_GPIO	MFP_CFG_IN(GPIO54, AF0)
+#define GPIO55_GPIO	MFP_CFG_IN(GPIO55, AF0)
+#define GPIO56_GPIO	MFP_CFG_IN(GPIO56, AF0)
+#define GPIO57_GPIO	MFP_CFG_IN(GPIO57, AF0)
+#define GPIO58_GPIO	MFP_CFG_IN(GPIO58, AF0)
+#define GPIO59_GPIO	MFP_CFG_IN(GPIO59, AF0)
+#define GPIO60_GPIO	MFP_CFG_IN(GPIO60, AF0)
+#define GPIO61_GPIO	MFP_CFG_IN(GPIO61, AF0)
+#define GPIO62_GPIO	MFP_CFG_IN(GPIO62, AF0)
+#define GPIO63_GPIO	MFP_CFG_IN(GPIO63, AF0)
+#define GPIO64_GPIO	MFP_CFG_IN(GPIO64, AF0)
+#define GPIO65_GPIO	MFP_CFG_IN(GPIO65, AF0)
+#define GPIO66_GPIO	MFP_CFG_IN(GPIO66, AF0)
+#define GPIO67_GPIO	MFP_CFG_IN(GPIO67, AF0)
+#define GPIO68_GPIO	MFP_CFG_IN(GPIO68, AF0)
+#define GPIO69_GPIO	MFP_CFG_IN(GPIO69, AF0)
+#define GPIO70_GPIO	MFP_CFG_IN(GPIO70, AF0)
+#define GPIO71_GPIO	MFP_CFG_IN(GPIO71, AF0)
+#define GPIO72_GPIO	MFP_CFG_IN(GPIO72, AF0)
+#define GPIO73_GPIO	MFP_CFG_IN(GPIO73, AF0)
+#define GPIO74_GPIO	MFP_CFG_IN(GPIO74, AF0)
+#define GPIO75_GPIO	MFP_CFG_IN(GPIO75, AF0)
+#define GPIO76_GPIO	MFP_CFG_IN(GPIO76, AF0)
+#define GPIO77_GPIO	MFP_CFG_IN(GPIO77, AF0)
+#define GPIO78_GPIO	MFP_CFG_IN(GPIO78, AF0)
+#define GPIO79_GPIO	MFP_CFG_IN(GPIO79, AF0)
+#define GPIO80_GPIO	MFP_CFG_IN(GPIO80, AF0)
+#define GPIO81_GPIO	MFP_CFG_IN(GPIO81, AF0)
+#define GPIO82_GPIO	MFP_CFG_IN(GPIO82, AF0)
+#define GPIO83_GPIO	MFP_CFG_IN(GPIO83, AF0)
+#define GPIO84_GPIO	MFP_CFG_IN(GPIO84, AF0)
+
+extern void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num);
+extern void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm);
+extern int gpio_set_wake(unsigned int gpio, unsigned int on);
+#endif /* __ASM_ARCH_MFP_PXA2XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa300.h b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
new file mode 100644
index 0000000..bc1fb33
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa300.h
@@ -0,0 +1,575 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa300.h
+ *
+ * PXA300/PXA310 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA300_H
+#define __ASM_ARCH_MFP_PXA300_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF1)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF3)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF2)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF3)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF3)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#ifdef CONFIG_CPU_PXA310
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#endif
+
+/* Chip Select */
+#define GPIO2_nCS3		MFP_CFG(GPIO2,  AF1)
+
+/* AC97 */
+#define GPIO23_AC97_nACRESET	MFP_CFG(GPIO23, AF1)
+#define GPIO24_AC97_SYSCLK	MFP_CFG(GPIO24, AF1)
+#define GPIO29_AC97_BITCLK	MFP_CFG(GPIO29, AF1)
+#define GPIO25_AC97_SDATA_IN_0	MFP_CFG(GPIO25, AF1)
+#define GPIO26_AC97_SDATA_IN_1	MFP_CFG(GPIO26, AF1)
+#define GPIO17_AC97_SDATA_IN_2	MFP_CFG(GPIO17, AF3)
+#define GPIO21_AC97_SDATA_IN_2	MFP_CFG(GPIO21, AF2)
+#define GPIO18_AC97_SDATA_IN_3	MFP_CFG(GPIO18, AF3)
+#define GPIO22_AC97_SDATA_IN_3	MFP_CFG(GPIO22, AF2)
+#define GPIO27_AC97_SDATA_OUT	MFP_CFG(GPIO27, AF1)
+#define GPIO28_AC97_SYNC	MFP_CFG(GPIO28, AF1)
+
+/* I2C */
+#define GPIO21_I2C_SCL		MFP_CFG_LPM(GPIO21, AF1, PULL_HIGH)
+#define GPIO22_I2C_SDA		MFP_CFG_LPM(GPIO22, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO39_CI_DD_0		MFP_CFG_DRV(GPIO39, AF1, DS04X)
+#define GPIO40_CI_DD_1		MFP_CFG_DRV(GPIO40, AF1, DS04X)
+#define GPIO41_CI_DD_2		MFP_CFG_DRV(GPIO41, AF1, DS04X)
+#define GPIO42_CI_DD_3		MFP_CFG_DRV(GPIO42, AF1, DS04X)
+#define GPIO43_CI_DD_4		MFP_CFG_DRV(GPIO43, AF1, DS04X)
+#define GPIO44_CI_DD_5		MFP_CFG_DRV(GPIO44, AF1, DS04X)
+#define GPIO45_CI_DD_6		MFP_CFG_DRV(GPIO45, AF1, DS04X)
+#define GPIO46_CI_DD_7		MFP_CFG_DRV(GPIO46, AF0, DS04X)
+#define GPIO47_CI_DD_8		MFP_CFG_DRV(GPIO47, AF1, DS04X)
+#define GPIO48_CI_DD_9		MFP_CFG_DRV(GPIO48, AF1, DS04X)
+#define GPIO52_CI_HSYNC		MFP_CFG_DRV(GPIO52, AF0, DS04X)
+#define GPIO51_CI_VSYNC		MFP_CFG_DRV(GPIO51, AF0, DS04X)
+#define GPIO49_CI_MCLK		MFP_CFG_DRV(GPIO49, AF0, DS04X)
+#define GPIO50_CI_PCLK		MFP_CFG_DRV(GPIO50, AF0, DS04X)
+
+/* KEYPAD */
+#define GPIO3_KP_DKIN_6		MFP_CFG_LPM(GPIO3,   AF2, FLOAT)
+#define GPIO4_KP_DKIN_7		MFP_CFG_LPM(GPIO4,   AF2, FLOAT)
+#define GPIO16_KP_DKIN_6	MFP_CFG_LPM(GPIO16,  AF6, FLOAT)
+#define GPIO83_KP_DKIN_2	MFP_CFG_LPM(GPIO83,  AF5, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84,  AF5, FLOAT)
+#define GPIO85_KP_DKIN_0	MFP_CFG_LPM(GPIO85,  AF3, FLOAT)
+#define GPIO86_KP_DKIN_1	MFP_CFG_LPM(GPIO86,  AF3, FLOAT)
+#define GPIO87_KP_DKIN_2	MFP_CFG_LPM(GPIO87,  AF3, FLOAT)
+#define GPIO88_KP_DKIN_3	MFP_CFG_LPM(GPIO88,  AF3, FLOAT)
+#define GPIO89_KP_DKIN_3	MFP_CFG_LPM(GPIO89,  AF3, FLOAT)
+#define GPIO107_KP_DKIN_0	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_1	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_2	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_3	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_4	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_5	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+#define GPIO113_KP_DKIN_6	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_7	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_0	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_1	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_2	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_3	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_4	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_5	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF5, FLOAT)
+#define GPIO0_2_KP_DKIN_0	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+#define GPIO1_2_KP_DKIN_1	MFP_CFG_LPM(GPIO1_2, AF2, FLOAT)
+#define GPIO2_2_KP_DKIN_6	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_7	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_1	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+#define GPIO5_2_KP_DKIN_0	MFP_CFG_LPM(GPIO5_2, AF2, FLOAT)
+
+#define GPIO5_KP_MKIN_0		MFP_CFG_LPM(GPIO5,   AF2, FLOAT)
+#define GPIO6_KP_MKIN_1		MFP_CFG_LPM(GPIO6,   AF2, FLOAT)
+#define GPIO9_KP_MKIN_6		MFP_CFG_LPM(GPIO9,   AF3, FLOAT)
+#define GPIO10_KP_MKIN_7	MFP_CFG_LPM(GPIO10,  AF3, FLOAT)
+#define GPIO70_KP_MKIN_6	MFP_CFG_LPM(GPIO70,  AF3, FLOAT)
+#define GPIO71_KP_MKIN_7	MFP_CFG_LPM(GPIO71,  AF3, FLOAT)
+#define GPIO100_KP_MKIN_6	MFP_CFG_LPM(GPIO100, AF7, FLOAT)
+#define GPIO101_KP_MKIN_7	MFP_CFG_LPM(GPIO101, AF7, FLOAT)
+#define GPIO112_KP_MKIN_6	MFP_CFG_LPM(GPIO112, AF4, FLOAT)
+#define GPIO113_KP_MKIN_7	MFP_CFG_LPM(GPIO113, AF4, FLOAT)
+#define GPIO115_KP_MKIN_0	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_1	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_2	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_3	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_4	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_5	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+#define GPIO125_KP_MKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO2_2_KP_MKIN_6	MFP_CFG_LPM(GPIO2_2, AF1, FLOAT)
+#define GPIO3_2_KP_MKIN_7	MFP_CFG_LPM(GPIO3_2, AF1, FLOAT)
+
+#define GPIO7_KP_MKOUT_5	MFP_CFG_LPM(GPIO7,   AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11,  AF3, DRIVE_HIGH)
+#define GPIO12_KP_MKOUT_6	MFP_CFG_LPM(GPIO12,  AF3, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_7	MFP_CFG_LPM(GPIO13,  AF3, DRIVE_HIGH)
+#define GPIO19_KP_MKOUT_4	MFP_CFG_LPM(GPIO19,  AF3, DRIVE_HIGH)
+#define GPIO20_KP_MKOUT_5	MFP_CFG_LPM(GPIO20,  AF3, DRIVE_HIGH)
+#define GPIO38_KP_MKOUT_5	MFP_CFG_LPM(GPIO38,  AF5, DRIVE_HIGH)
+#define GPIO53_KP_MKOUT_6	MFP_CFG_LPM(GPIO53,  AF5, DRIVE_HIGH)
+#define GPIO78_KP_MKOUT_7	MFP_CFG_LPM(GPIO78,  AF5, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_0	MFP_CFG_LPM(GPIO85,  AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_1	MFP_CFG_LPM(GPIO86,  AF2, DRIVE_HIGH)
+#define GPIO87_KP_MKOUT_2	MFP_CFG_LPM(GPIO87,  AF2, DRIVE_HIGH)
+#define GPIO88_KP_MKOUT_3	MFP_CFG_LPM(GPIO88,  AF2, DRIVE_HIGH)
+#define GPIO104_KP_MKOUT_6	MFP_CFG_LPM(GPIO104, AF5, DRIVE_HIGH)
+#define GPIO105_KP_MKOUT_7	MFP_CFG_LPM(GPIO105, AF5, DRIVE_HIGH)
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_7	MFP_CFG_LPM(GPIO126, AF4, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_6	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+#define GPIO4_2_KP_MKOUT_5	MFP_CFG_LPM(GPIO4_2, AF1, DRIVE_HIGH)
+#define GPIO6_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO6_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO54_LCD_LDD_0	MFP_CFG_DRV(GPIO54, AF1, DS01X)
+#define GPIO55_LCD_LDD_1	MFP_CFG_DRV(GPIO55, AF1, DS01X)
+#define GPIO56_LCD_LDD_2	MFP_CFG_DRV(GPIO56, AF1, DS01X)
+#define GPIO57_LCD_LDD_3	MFP_CFG_DRV(GPIO57, AF1, DS01X)
+#define GPIO58_LCD_LDD_4	MFP_CFG_DRV(GPIO58, AF1, DS01X)
+#define GPIO59_LCD_LDD_5	MFP_CFG_DRV(GPIO59, AF1, DS01X)
+#define GPIO60_LCD_LDD_6	MFP_CFG_DRV(GPIO60, AF1, DS01X)
+#define GPIO61_LCD_LDD_7	MFP_CFG_DRV(GPIO61, AF1, DS01X)
+#define GPIO62_LCD_LDD_8	MFP_CFG_DRV(GPIO62, AF1, DS01X)
+#define GPIO63_LCD_LDD_9	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_10	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_11	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_12	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_13	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_14	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_15	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_16	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_17	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO62_LCD_CS_N		MFP_CFG_DRV(GPIO62, AF2, DS01X)
+#define GPIO72_LCD_FCLK		MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_LCLK		MFP_CFG_DRV(GPIO73, AF1, DS01X)
+#define GPIO74_LCD_PCLK		MFP_CFG_DRV(GPIO74, AF1, DS02X)
+#define GPIO75_LCD_BIAS		MFP_CFG_DRV(GPIO75, AF1, DS01X)
+#define GPIO76_LCD_VSYNC	MFP_CFG_DRV(GPIO76, AF2, DS01X)
+
+#define GPIO15_LCD_CS_N		MFP_CFG_DRV(GPIO15,  AF2, DS01X)
+#define GPIO127_LCD_CS_N	MFP_CFG_DRV(GPIO127, AF1, DS01X)
+#define GPIO63_LCD_VSYNC	MFP_CFG_DRV(GPIO63,  AF2, DS01X)
+
+/* Mini-LCD */
+#define GPIO72_MLCD_FCLK	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_LCLK	MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO54_MLCD_LDD_0	MFP_CFG_DRV(GPIO54, AF7, DS08X)
+#define GPIO55_MLCD_LDD_1	MFP_CFG_DRV(GPIO55, AF7, DS08X)
+#define GPIO56_MLCD_LDD_2	MFP_CFG_DRV(GPIO56, AF7, DS08X)
+#define GPIO57_MLCD_LDD_3	MFP_CFG_DRV(GPIO57, AF7, DS08X)
+#define GPIO58_MLCD_LDD_4	MFP_CFG_DRV(GPIO58, AF7, DS08X)
+#define GPIO59_MLCD_LDD_5	MFP_CFG_DRV(GPIO59, AF7, DS08X)
+#define GPIO60_MLCD_LDD_6	MFP_CFG_DRV(GPIO60, AF7, DS08X)
+#define GPIO61_MLCD_LDD_7	MFP_CFG_DRV(GPIO61, AF7, DS08X)
+#define GPIO62_MLCD_LDD_8	MFP_CFG_DRV(GPIO62, AF7, DS08X)
+#define GPIO63_MLCD_LDD_9	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_LDD_10	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_LDD_11	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_LDD_12	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_LDD_13	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_LDD_14	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_LDD_15	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO74_MLCD_PCLK	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO75_MLCD_BIAS	MFP_CFG_DRV(GPIO75, AF2, DS08X)
+
+/* MMC1 */
+#define GPIO7_MMC1_CLK		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_CMD		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO14_MMC1_CMD		MFP_CFG_LPM(GPIO14, AF5, DRIVE_HIGH)
+#define GPIO15_MMC1_CMD		MFP_CFG_LPM(GPIO15, AF5, DRIVE_HIGH)
+#define GPIO3_MMC1_DAT0		MFP_CFG_LPM(GPIO3,  AF4, DRIVE_HIGH)
+#define GPIO4_MMC1_DAT1		MFP_CFG_LPM(GPIO4,  AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT2		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT3		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+
+/* MMC2 */
+#define GPIO9_MMC2_DAT0		MFP_CFG_LPM(GPIO9,  AF4, PULL_HIGH)
+#define GPIO10_MMC2_DAT1	MFP_CFG_LPM(GPIO10, AF4, PULL_HIGH)
+#define GPIO11_MMC2_DAT2	MFP_CFG_LPM(GPIO11, AF4, PULL_HIGH)
+#define GPIO12_MMC2_DAT3	MFP_CFG_LPM(GPIO12, AF4, PULL_HIGH)
+#define GPIO13_MMC2_CLK		MFP_CFG_LPM(GPIO13, AF4, PULL_HIGH)
+#define GPIO14_MMC2_CMD		MFP_CFG_LPM(GPIO14, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT0	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT1	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+#define GPIO79_MMC2_DAT2	MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_DAT3	MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+#define GPIO81_MMC2_CLK		MFP_CFG_LPM(GPIO81, AF4, PULL_HIGH)
+#define GPIO82_MMC2_CMD		MFP_CFG_LPM(GPIO82, AF4, PULL_HIGH)
+
+/* SSP1 */
+#define GPIO89_SSP1_EXTCLK	MFP_CFG(GPIO89, AF1)
+#define GPIO90_SSP1_SYSCLK	MFP_CFG(GPIO90, AF1)
+#define GPIO15_SSP1_SCLK	MFP_CFG(GPIO15, AF6)
+#define GPIO16_SSP1_FRM		MFP_CFG(GPIO16, AF2)
+#define GPIO33_SSP1_SCLK	MFP_CFG(GPIO33, AF5)
+#define GPIO34_SSP1_FRM		MFP_CFG(GPIO34, AF5)
+#define GPIO85_SSP1_SCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_FRM		MFP_CFG(GPIO86, AF1)
+#define GPIO18_SSP1_TXD		MFP_CFG(GPIO18, AF7)
+#define GPIO18_SSP1_RXD		MFP_CFG(GPIO18, AF2)
+#define GPIO20_SSP1_TXD		MFP_CFG(GPIO20, AF2)
+#define GPIO20_SSP1_RXD		MFP_CFG(GPIO20, AF7)
+#define GPIO35_SSP1_TXD		MFP_CFG(GPIO35, AF5)
+#define GPIO35_SSP1_RXD		MFP_CFG(GPIO35, AF4)
+#define GPIO36_SSP1_TXD		MFP_CFG(GPIO36, AF5)
+#define GPIO36_SSP1_RXD		MFP_CFG(GPIO36, AF6)
+#define GPIO87_SSP1_TXD		MFP_CFG(GPIO87, AF1)
+#define GPIO87_SSP1_RXD		MFP_CFG(GPIO87, AF6)
+#define GPIO88_SSP1_TXD		MFP_CFG(GPIO88, AF6)
+#define GPIO88_SSP1_RXD		MFP_CFG(GPIO88, AF1)
+
+/* SSP2 */
+#define GPIO29_SSP2_EXTCLK	MFP_CFG(GPIO29, AF2)
+#define GPIO23_SSP2_SCLK	MFP_CFG(GPIO23, AF2)
+#define GPIO17_SSP2_FRM		MFP_CFG(GPIO17, AF2)
+#define GPIO25_SSP2_SCLK	MFP_CFG(GPIO25, AF2)
+#define GPIO26_SSP2_FRM		MFP_CFG(GPIO26, AF2)
+#define GPIO33_SSP2_SCLK	MFP_CFG(GPIO33, AF6)
+#define GPIO34_SSP2_FRM		MFP_CFG(GPIO34, AF6)
+#define GPIO64_SSP2_SCLK	MFP_CFG(GPIO64, AF2)
+#define GPIO65_SSP2_FRM		MFP_CFG(GPIO65, AF2)
+#define GPIO19_SSP2_TXD		MFP_CFG(GPIO19, AF2)
+#define GPIO19_SSP2_RXD		MFP_CFG(GPIO19, AF7)
+#define GPIO24_SSP2_TXD		MFP_CFG(GPIO24, AF5)
+#define GPIO24_SSP2_RXD		MFP_CFG(GPIO24, AF4)
+#define GPIO27_SSP2_TXD		MFP_CFG(GPIO27, AF2)
+#define GPIO27_SSP2_RXD		MFP_CFG(GPIO27, AF5)
+#define GPIO28_SSP2_TXD		MFP_CFG(GPIO28, AF5)
+#define GPIO28_SSP2_RXD		MFP_CFG(GPIO28, AF2)
+#define GPIO35_SSP2_TXD		MFP_CFG(GPIO35, AF7)
+#define GPIO35_SSP2_RXD		MFP_CFG(GPIO35, AF6)
+#define GPIO66_SSP2_TXD		MFP_CFG(GPIO66, AF4)
+#define GPIO66_SSP2_RXD		MFP_CFG(GPIO66, AF2)
+#define GPIO67_SSP2_TXD		MFP_CFG(GPIO67, AF2)
+#define GPIO67_SSP2_RXD		MFP_CFG(GPIO67, AF4)
+#define GPIO36_SSP2_TXD		MFP_CFG(GPIO36, AF7)
+
+/* SSP3 */
+#define GPIO69_SSP3_FRM		MFP_CFG_X(GPIO69, AF2, DS08X, DRIVE_LOW)
+#define GPIO68_SSP3_SCLK	MFP_CFG_X(GPIO68, AF2, DS08X, FLOAT)
+#define GPIO92_SSP3_FRM		MFP_CFG_X(GPIO92, AF1, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_SCLK	MFP_CFG_X(GPIO91, AF1, DS08X, FLOAT)
+#define GPIO70_SSP3_TXD		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO70_SSP3_RXD		MFP_CFG_X(GPIO70, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF5, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF2, DS08X, FLOAT)
+#define GPIO93_SSP3_TXD		MFP_CFG_X(GPIO93, AF1, DS08X, DRIVE_LOW)
+#define GPIO93_SSP3_RXD		MFP_CFG_X(GPIO93, AF5, DS08X, FLOAT)
+#define GPIO94_SSP3_TXD		MFP_CFG_X(GPIO94, AF5, DS08X, DRIVE_LOW)
+#define GPIO94_SSP3_RXD		MFP_CFG_X(GPIO94, AF1, DS08X, FLOAT)
+
+/* SSP4 */
+#define GPIO95_SSP4_SCLK	MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_FRM		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO97_SSP4_TXD		MFP_CFG_LPM(GPIO97, AF1, PULL_HIGH)
+#define GPIO97_SSP4_RXD		MFP_CFG_LPM(GPIO97, AF5, PULL_HIGH)
+#define GPIO98_SSP4_TXD		MFP_CFG_LPM(GPIO98, AF5, PULL_HIGH)
+#define GPIO98_SSP4_RXD		MFP_CFG_LPM(GPIO98, AF1, PULL_HIGH)
+
+/* UART1 */
+#define GPIO32_UART1_CTS	MFP_CFG_LPM(GPIO32,  AF2, FLOAT)
+#define GPIO37_UART1_CTS	MFP_CFG_LPM(GPIO37,  AF4, FLOAT)
+#define GPIO79_UART1_CTS	MFP_CFG_LPM(GPIO79,  AF1, FLOAT)
+#define GPIO84_UART1_CTS	MFP_CFG_LPM(GPIO84,  AF3, FLOAT)
+#define GPIO101_UART1_CTS	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO106_UART1_CTS	MFP_CFG_LPM(GPIO106, AF6, FLOAT)
+
+#define GPIO32_UART1_RTS	MFP_CFG_LPM(GPIO32,  AF4, FLOAT)
+#define GPIO37_UART1_RTS	MFP_CFG_LPM(GPIO37,  AF2, FLOAT)
+#define GPIO79_UART1_RTS	MFP_CFG_LPM(GPIO79,  AF3, FLOAT)
+#define GPIO84_UART1_RTS	MFP_CFG_LPM(GPIO84,  AF1, FLOAT)
+#define GPIO101_UART1_RTS	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO106_UART1_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+
+#define GPIO34_UART1_DSR	MFP_CFG_LPM(GPIO34,  AF2, FLOAT)
+#define GPIO36_UART1_DSR	MFP_CFG_LPM(GPIO36,  AF4, FLOAT)
+#define GPIO81_UART1_DSR	MFP_CFG_LPM(GPIO81,  AF1, FLOAT)
+#define GPIO83_UART1_DSR	MFP_CFG_LPM(GPIO83,  AF3, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO105_UART1_DSR	MFP_CFG_LPM(GPIO105, AF6, FLOAT)
+
+#define GPIO34_UART1_DTR	MFP_CFG_LPM(GPIO34,  AF4, FLOAT)
+#define GPIO36_UART1_DTR	MFP_CFG_LPM(GPIO36,  AF2, FLOAT)
+#define GPIO81_UART1_DTR	MFP_CFG_LPM(GPIO81,  AF3, FLOAT)
+#define GPIO83_UART1_DTR	MFP_CFG_LPM(GPIO83,  AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO105_UART1_DTR	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+
+#define GPIO35_UART1_RI		MFP_CFG_LPM(GPIO35,  AF2, FLOAT)
+#define GPIO82_UART1_RI		MFP_CFG_LPM(GPIO82,  AF1, FLOAT)
+#define GPIO104_UART1_RI	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+
+#define GPIO33_UART1_DCD	MFP_CFG_LPM(GPIO33,  AF2, FLOAT)
+#define GPIO80_UART1_DCD	MFP_CFG_LPM(GPIO80,  AF1, FLOAT)
+#define GPIO102_UART1_DCD	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+#define GPIO30_UART1_RXD	MFP_CFG_LPM(GPIO30,  AF2, FLOAT)
+#define GPIO31_UART1_RXD	MFP_CFG_LPM(GPIO31,  AF4, FLOAT)
+#define GPIO77_UART1_RXD	MFP_CFG_LPM(GPIO77,  AF1, FLOAT)
+#define GPIO78_UART1_RXD	MFP_CFG_LPM(GPIO78,  AF3, FLOAT)
+#define GPIO99_UART1_RXD	MFP_CFG_LPM(GPIO99,  AF1, FLOAT)
+#define GPIO100_UART1_RXD	MFP_CFG_LPM(GPIO100, AF6, FLOAT)
+#define GPIO102_UART1_RXD	MFP_CFG_LPM(GPIO102, AF6, FLOAT)
+#define GPIO104_UART1_RXD	MFP_CFG_LPM(GPIO104, AF4, FLOAT)
+
+#define GPIO30_UART1_TXD	MFP_CFG_LPM(GPIO30,  AF4, FLOAT)
+#define GPIO31_UART1_TXD	MFP_CFG_LPM(GPIO31,  AF2, FLOAT)
+#define GPIO77_UART1_TXD	MFP_CFG_LPM(GPIO77,  AF3, FLOAT)
+#define GPIO78_UART1_TXD	MFP_CFG_LPM(GPIO78,  AF1, FLOAT)
+#define GPIO99_UART1_TXD	MFP_CFG_LPM(GPIO99,  AF6, FLOAT)
+#define GPIO100_UART1_TXD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO102_UART1_TXD	MFP_CFG_LPM(GPIO102, AF4, FLOAT)
+
+/* UART2 */
+#define GPIO15_UART2_CTS	MFP_CFG_LPM(GPIO15,  AF3, FLOAT)
+#define GPIO16_UART2_CTS	MFP_CFG_LPM(GPIO16,  AF5, FLOAT)
+#define GPIO111_UART2_CTS	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO114_UART2_CTS	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+
+#define GPIO15_UART2_RTS	MFP_CFG_LPM(GPIO15,  AF4, FLOAT)
+#define GPIO16_UART2_RTS	MFP_CFG_LPM(GPIO16,  AF4, FLOAT)
+#define GPIO114_UART2_RTS	MFP_CFG_LPM(GPIO114, AF3, FLOAT)
+#define GPIO111_UART2_RTS	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+#define GPIO18_UART2_RXD	MFP_CFG_LPM(GPIO18,  AF5, FLOAT)
+#define GPIO19_UART2_RXD	MFP_CFG_LPM(GPIO19,  AF4, FLOAT)
+#define GPIO112_UART2_RXD	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO113_UART2_RXD	MFP_CFG_LPM(GPIO113, AF3, FLOAT)
+
+#define GPIO18_UART2_TXD	MFP_CFG_LPM(GPIO18,  AF4, FLOAT)
+#define GPIO19_UART2_TXD	MFP_CFG_LPM(GPIO19,  AF5, FLOAT)
+#define GPIO112_UART2_TXD	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO113_UART2_TXD	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO91_UART3_CTS	MFP_CFG_LPM(GPIO91,  AF2, FLOAT)
+#define GPIO92_UART3_CTS	MFP_CFG_LPM(GPIO92,  AF4, FLOAT)
+#define GPIO107_UART3_CTS	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_CTS	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+#define GPIO91_UART3_RTS	MFP_CFG_LPM(GPIO91,  AF4, FLOAT)
+#define GPIO92_UART3_RTS	MFP_CFG_LPM(GPIO92,  AF2, FLOAT)
+#define GPIO107_UART3_RTS	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO108_UART3_RTS	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+
+#define GPIO7_UART3_RXD		MFP_CFG_LPM(GPIO7,   AF2, FLOAT)
+#define GPIO8_UART3_RXD		MFP_CFG_LPM(GPIO8,   AF6, FLOAT)
+#define GPIO93_UART3_RXD	MFP_CFG_LPM(GPIO93,  AF4, FLOAT)
+#define GPIO94_UART3_RXD	MFP_CFG_LPM(GPIO94,  AF2, FLOAT)
+#define GPIO109_UART3_RXD	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO110_UART3_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+
+#define GPIO7_UART3_TXD		MFP_CFG_LPM(GPIO7,   AF6, FLOAT)
+#define GPIO8_UART3_TXD		MFP_CFG_LPM(GPIO8,   AF2, FLOAT)
+#define GPIO93_UART3_TXD	MFP_CFG_LPM(GPIO93,  AF2, FLOAT)
+#define GPIO94_UART3_TXD	MFP_CFG_LPM(GPIO94,  AF4, FLOAT)
+#define GPIO109_UART3_TXD	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO110_UART3_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+
+/* USB Host */
+#define GPIO0_2_USBH_PEN	MFP_CFG(GPIO0_2, AF1)
+#define GPIO1_2_USBH_PWR	MFP_CFG(GPIO1_2, AF1)
+
+/* USB P3 */
+#define GPIO77_USB_P3_1		MFP_CFG(GPIO77,  AF2)
+#define GPIO78_USB_P3_2		MFP_CFG(GPIO78,  AF2)
+#define GPIO79_USB_P3_3		MFP_CFG(GPIO79,  AF2)
+#define GPIO80_USB_P3_4		MFP_CFG(GPIO80,  AF2)
+#define GPIO81_USB_P3_5		MFP_CFG(GPIO81,  AF2)
+#define GPIO82_USB_P3_6		MFP_CFG(GPIO82,  AF2)
+
+/* PWM */
+#define GPIO17_PWM0_OUT		MFP_CFG(GPIO17, AF1)
+#define GPIO18_PWM1_OUT		MFP_CFG(GPIO18, AF1)
+#define GPIO19_PWM2_OUT		MFP_CFG(GPIO19, AF1)
+#define GPIO20_PWM3_OUT		MFP_CFG(GPIO20, AF1)
+
+/* CIR */
+#define GPIO8_CIR_OUT		MFP_CFG(GPIO8, AF5)
+#define GPIO16_CIR_OUT		MFP_CFG(GPIO16, AF3)
+
+#define GPIO20_OW_DQ_IN		MFP_CFG(GPIO20, AF5)
+#define GPIO126_OW_DQ		MFP_CFG(GPIO126, AF2)
+
+#define GPIO0_DF_RDY		MFP_CFG(GPIO0, AF1)
+#define GPIO7_CLK_BYPASS_XSC	MFP_CFG(GPIO7, AF7)
+#define GPIO17_EXT_SYNC_MVT_0	MFP_CFG(GPIO17, AF6)
+#define GPIO18_EXT_SYNC_MVT_1	MFP_CFG(GPIO18, AF6)
+#define GPIO19_OST_CHOUT_MVT_0	MFP_CFG(GPIO19, AF6)
+#define GPIO20_OST_CHOUT_MVT_1	MFP_CFG(GPIO20, AF6)
+#define GPIO49_48M_CLK		MFP_CFG(GPIO49, AF2)
+#define GPIO126_EXT_CLK		MFP_CFG(GPIO126, AF3)
+#define GPIO127_CLK_BYPASS_GB	MFP_CFG(GPIO127, AF7)
+#define GPIO71_EXT_MATCH_MVT	MFP_CFG(GPIO71, AF6)
+
+#define GPIO3_uIO_IN		MFP_CFG(GPIO3, AF1)
+
+#define GPIO4_uSIM_CARD_STATE	MFP_CFG(GPIO4, AF1)
+#define GPIO5_uSIM_uCLK		MFP_CFG(GPIO5, AF1)
+#define GPIO6_uSIM_uRST		MFP_CFG(GPIO6, AF1)
+#define GPIO16_uSIM_UVS_0	MFP_CFG(GPIO16, AF1)
+
+#define GPIO9_SCIO		MFP_CFG(GPIO9, AF1)
+#define GPIO20_RTC_MVT		MFP_CFG(GPIO20, AF4)
+#define GPIO126_RTC_MVT		MFP_CFG(GPIO126, AF1)
+
+/*
+ * PXA300 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA300
+#define GPIO99_USB_P2_2		MFP_CFG(GPIO99, AF2)
+#define GPIO99_USB_P2_5		MFP_CFG(GPIO99, AF3)
+#define GPIO99_USB_P2_6		MFP_CFG(GPIO99, AF4)
+#define GPIO100_USB_P2_2	MFP_CFG(GPIO100, AF4)
+#define GPIO100_USB_P2_5	MFP_CFG(GPIO100, AF5)
+#define GPIO101_USB_P2_1	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_4	MFP_CFG(GPIO102, AF2)
+#define GPIO104_USB_P2_3	MFP_CFG(GPIO104, AF2)
+#define GPIO105_USB_P2_5	MFP_CFG(GPIO105, AF2)
+#define GPIO100_USB_P2_6	MFP_CFG(GPIO100, AF2)
+#define GPIO106_USB_P2_7	MFP_CFG(GPIO106, AF2)
+#define GPIO103_USB_P2_8	MFP_CFG(GPIO103, AF2)
+
+/* U2D UTMI */
+#define GPIO38_UTM_CLK		MFP_CFG(GPIO38,  AF1)
+#define GPIO26_U2D_RXERROR	MFP_CFG(GPIO26,  AF3)
+#define GPIO50_U2D_RXERROR	MFP_CFG(GPIO50,  AF1)
+#define GPIO89_U2D_RXERROR	MFP_CFG(GPIO89,  AF5)
+#define GPIO24_UTM_RXVALID	MFP_CFG(GPIO24,  AF3)
+#define GPIO48_UTM_RXVALID	MFP_CFG(GPIO48,  AF2)
+#define GPIO87_UTM_RXVALID	MFP_CFG(GPIO87,  AF5)
+#define GPIO25_UTM_RXACTIVE	MFP_CFG(GPIO25,  AF3)
+#define GPIO47_UTM_RXACTIVE	MFP_CFG(GPIO47,  AF2)
+#define GPIO49_UTM_RXACTIVE	MFP_CFG(GPIO49,  AF1)
+#define GPIO88_UTM_RXACTIVE	MFP_CFG(GPIO88,  AF5)
+#define GPIO53_UTM_TXREADY	MFP_CFG(GPIO53,  AF1)
+#define GPIO67_UTM_LINESTATE_0	MFP_CFG(GPIO67,  AF3)
+#define GPIO92_UTM_LINESTATE_0	MFP_CFG(GPIO92,  AF3)
+#define GPIO104_UTM_LINESTATE_0	MFP_CFG(GPIO104, AF3)
+#define GPIO109_UTM_LINESTATE_0	MFP_CFG(GPIO109, AF4)
+#define GPIO68_UTM_LINESTATE_1	MFP_CFG(GPIO68,  AF3)
+#define GPIO93_UTM_LINESTATE_1	MFP_CFG(GPIO93,  AF3)
+#define GPIO105_UTM_LINESTATE_1	MFP_CFG(GPIO105, AF3)
+#define GPIO27_U2D_OPMODE_0	MFP_CFG(GPIO27,  AF4)
+#define GPIO51_U2D_OPMODE_0	MFP_CFG(GPIO51,  AF2)
+#define GPIO90_U2D_OPMODE_0	MFP_CFG(GPIO90,  AF7)
+#define GPIO28_U2D_OPMODE_1	MFP_CFG(GPIO28,  AF4)
+#define GPIO52_U2D_OPMODE_1	MFP_CFG(GPIO52,  AF2)
+#define GPIO106_U2D_OPMODE_1	MFP_CFG(GPIO106, AF3)
+#define GPIO110_U2D_OPMODE_1	MFP_CFG(GPIO110, AF5)
+#define GPIO76_U2D_RESET	MFP_CFG(GPIO76,  AF1)
+#define GPIO95_U2D_RESET	MFP_CFG(GPIO95,  AF2)
+#define GPIO100_U2D_RESET	MFP_CFG(GPIO100, AF3)
+#define GPIO66_U2D_SUSPEND	MFP_CFG(GPIO66,  AF3)
+#define GPIO98_U2D_SUSPEND	MFP_CFG(GPIO98,  AF2)
+#define GPIO103_U2D_SUSPEND	MFP_CFG(GPIO103, AF3)
+#define GPIO65_U2D_TERM_SEL	MFP_CFG(GPIO65,  AF5)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97,  AF3)
+#define GPIO102_U2D_TERM_SEL	MFP_CFG(GPIO102, AF5)
+#define GPIO29_U2D_TXVALID	MFP_CFG(GPIO29,  AF3)
+#define GPIO52_U2D_TXVALID	MFP_CFG(GPIO52,  AF4)
+#define GPIO69_U2D_TXVALID	MFP_CFG(GPIO69,  AF3)
+#define GPIO85_U2D_TXVALID	MFP_CFG(GPIO85,  AF7)
+#define GPIO64_U2D_XCVR_SEL	MFP_CFG(GPIO64,  AF5)
+#define GPIO96_U2D_XCVR_SEL	MFP_CFG(GPIO96,  AF3)
+#define GPIO101_U2D_XCVR_SEL	MFP_CFG(GPIO101, AF5)
+#define GPIO30_UTM_PHYDATA_0	MFP_CFG(GPIO30,  AF3)
+#define GPIO31_UTM_PHYDATA_1	MFP_CFG(GPIO31,  AF3)
+#define GPIO32_UTM_PHYDATA_2	MFP_CFG(GPIO32,  AF3)
+#define GPIO33_UTM_PHYDATA_3	MFP_CFG(GPIO33,  AF3)
+#define GPIO34_UTM_PHYDATA_4	MFP_CFG(GPIO34,  AF3)
+#define GPIO35_UTM_PHYDATA_5	MFP_CFG(GPIO35,  AF3)
+#define GPIO36_UTM_PHYDATA_6	MFP_CFG(GPIO36,  AF3)
+#define GPIO37_UTM_PHYDATA_7	MFP_CFG(GPIO37,  AF3)
+#define GPIO39_UTM_PHYDATA_0	MFP_CFG(GPIO39,  AF3)
+#define GPIO40_UTM_PHYDATA_1	MFP_CFG(GPIO40,  AF3)
+#define GPIO41_UTM_PHYDATA_2	MFP_CFG(GPIO41,  AF3)
+#define GPIO42_UTM_PHYDATA_3	MFP_CFG(GPIO42,  AF3)
+#define GPIO43_UTM_PHYDATA_4	MFP_CFG(GPIO43,  AF3)
+#define GPIO44_UTM_PHYDATA_5	MFP_CFG(GPIO44,  AF3)
+#define GPIO45_UTM_PHYDATA_6	MFP_CFG(GPIO45,  AF3)
+#define GPIO46_UTM_PHYDATA_7	MFP_CFG(GPIO46,  AF3)
+#endif /* CONFIG_CPU_PXA300 */
+
+/*
+ * PXA310 specific MFP configurations
+ */
+#ifdef CONFIG_CPU_PXA310
+/* USB P2 */
+#define GPIO36_USB_P2_1		MFP_CFG(GPIO36, AF1)
+#define GPIO30_USB_P2_2		MFP_CFG(GPIO30, AF1)
+#define GPIO35_USB_P2_3		MFP_CFG(GPIO35, AF1)
+#define GPIO32_USB_P2_4		MFP_CFG(GPIO32, AF1)
+#define GPIO34_USB_P2_5		MFP_CFG(GPIO34, AF1)
+#define GPIO31_USB_P2_6		MFP_CFG(GPIO31, AF1)
+
+/* MMC1 */
+#define GPIO24_MMC1_CMD		MFP_CFG(GPIO24, AF3)
+#define GPIO29_MMC1_DAT0	MFP_CFG(GPIO29, AF3)
+
+/* MMC3 */
+#define GPIO103_MMC3_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO105_MMC3_CMD	MFP_CFG(GPIO105, AF2)
+#define GPIO11_2_MMC3_CLK	MFP_CFG(GPIO11_2, AF1)
+#define GPIO12_2_MMC3_CMD	MFP_CFG(GPIO12_2, AF1)
+#define GPIO7_2_MMC3_DAT0	MFP_CFG(GPIO7_2, AF1)
+#define GPIO8_2_MMC3_DAT1	MFP_CFG(GPIO8_2, AF1)
+#define GPIO9_2_MMC3_DAT2	MFP_CFG(GPIO9_2, AF1)
+#define GPIO10_2_MMC3_DAT3	MFP_CFG(GPIO10_2, AF1)
+
+/* ULPI */
+#define GPIO38_ULPI_CLK		MFP_CFG(GPIO38, AF1)
+#define GPIO30_ULPI_DATA_OUT_0	MFP_CFG(GPIO30, AF3)
+#define GPIO31_ULPI_DATA_OUT_1	MFP_CFG(GPIO31, AF3)
+#define GPIO32_ULPI_DATA_OUT_2	MFP_CFG(GPIO32, AF3)
+#define GPIO33_ULPI_DATA_OUT_3	MFP_CFG(GPIO33, AF3)
+#define GPIO34_ULPI_DATA_OUT_4	MFP_CFG(GPIO34, AF3)
+#define GPIO35_ULPI_DATA_OUT_5	MFP_CFG(GPIO35, AF3)
+#define GPIO36_ULPI_DATA_OUT_6	MFP_CFG(GPIO36, AF3)
+#define GPIO37_ULPI_DATA_OUT_7	MFP_CFG(GPIO37, AF3)
+#define GPIO33_ULPI_OTG_INTR	MFP_CFG(GPIO33, AF1)
+
+#define ULPI_DIR	MFP_CFG_DRV(ULPI_DIR, MFP_AF0, MFP_DS01X)
+#define ULPI_NXT	MFP_CFG_DRV(ULPI_NXT, MFP_AF0, MFP_DS01X)
+#define ULPI_STP	MFP_CFG_DRV(ULPI_STP, MFP_AF0, MFP_DS01X)
+#endif /* CONFIG_CPU_PXA310 */
+
+#endif /* __ASM_ARCH_MFP_PXA300_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa320.h b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
new file mode 100644
index 0000000..67f8385
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa320.h
@@ -0,0 +1,447 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa320.h
+ *
+ * PXA320 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ * 2007-08-21: eric miao <eric.miao@marvell.com>
+ *             initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA320_H
+#define __ASM_ARCH_MFP_PXA320_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+
+#define GPIO7_2_GPIO		MFP_CFG(GPIO7_2, AF0)
+#define GPIO8_2_GPIO		MFP_CFG(GPIO8_2, AF0)
+#define GPIO9_2_GPIO		MFP_CFG(GPIO9_2, AF0)
+#define GPIO10_2_GPIO		MFP_CFG(GPIO10_2, AF0)
+#define GPIO11_2_GPIO		MFP_CFG(GPIO11_2, AF0)
+#define GPIO12_2_GPIO		MFP_CFG(GPIO12_2, AF0)
+#define GPIO13_2_GPIO		MFP_CFG(GPIO13_2, AF0)
+#define GPIO14_2_GPIO		MFP_CFG(GPIO14_2, AF0)
+#define GPIO15_2_GPIO		MFP_CFG(GPIO15_2, AF0)
+#define GPIO16_2_GPIO		MFP_CFG(GPIO16_2, AF0)
+#define GPIO17_2_GPIO		MFP_CFG(GPIO17_2, AF0)
+
+/* Chip Select */
+#define GPIO4_nCS3		MFP_CFG(GPIO4, AF1)
+
+/* AC97 */
+#define GPIO34_AC97_SYSCLK	MFP_CFG(GPIO34, AF1)
+#define GPIO39_AC97_BITCLK	MFP_CFG(GPIO39, AF1)
+#define GPIO40_AC97_nACRESET	MFP_CFG(GPIO40, AF1)
+#define GPIO35_AC97_SDATA_IN_0	MFP_CFG(GPIO35, AF1)
+#define GPIO36_AC97_SDATA_IN_1	MFP_CFG(GPIO36, AF1)
+#define GPIO32_AC97_SDATA_IN_2	MFP_CFG(GPIO32, AF2)
+#define GPIO33_AC97_SDATA_IN_3	MFP_CFG(GPIO33, AF2)
+#define GPIO11_AC97_SDATA_IN_2	MFP_CFG(GPIO11, AF3)
+#define GPIO12_AC97_SDATA_IN_3	MFP_CFG(GPIO12, AF3)
+#define GPIO37_AC97_SDATA_OUT	MFP_CFG(GPIO37, AF1)
+#define GPIO38_AC97_SYNC	MFP_CFG(GPIO38, AF1)
+
+/* I2C */
+#define GPIO32_I2C_SCL		MFP_CFG_LPM(GPIO32, AF1, PULL_HIGH)
+#define GPIO33_I2C_SDA		MFP_CFG_LPM(GPIO33, AF1, PULL_HIGH)
+
+/* QCI */
+#define GPIO49_CI_DD_0		MFP_CFG_DRV(GPIO49, AF1, DS04X)
+#define GPIO50_CI_DD_1		MFP_CFG_DRV(GPIO50, AF1, DS04X)
+#define GPIO51_CI_DD_2		MFP_CFG_DRV(GPIO51, AF1, DS04X)
+#define GPIO52_CI_DD_3		MFP_CFG_DRV(GPIO52, AF1, DS04X)
+#define GPIO53_CI_DD_4		MFP_CFG_DRV(GPIO53, AF1, DS04X)
+#define GPIO54_CI_DD_5		MFP_CFG_DRV(GPIO54, AF1, DS04X)
+#define GPIO55_CI_DD_6		MFP_CFG_DRV(GPIO55, AF1, DS04X)
+#define GPIO56_CI_DD_7		MFP_CFG_DRV(GPIO56, AF0, DS04X)
+#define GPIO57_CI_DD_8		MFP_CFG_DRV(GPIO57, AF1, DS04X)
+#define GPIO58_CI_DD_9		MFP_CFG_DRV(GPIO58, AF1, DS04X)
+#define GPIO59_CI_MCLK		MFP_CFG_DRV(GPIO59, AF0, DS04X)
+#define GPIO60_CI_PCLK		MFP_CFG_DRV(GPIO60, AF0, DS04X)
+#define GPIO61_CI_HSYNC		MFP_CFG_DRV(GPIO61, AF0, DS04X)
+#define GPIO62_CI_VSYNC		MFP_CFG_DRV(GPIO62, AF0, DS04X)
+
+#define GPIO31_CIR_OUT		MFP_CFG(GPIO31, AF5)
+
+#define GPIO0_2_CLK_EXT		MFP_CFG(GPIO0_2, AF3)
+#define GPIO0_DRQ		MFP_CFG(GPIO0, AF2)
+#define GPIO11_EXT_SYNC0	MFP_CFG(GPIO11, AF5)
+#define GPIO12_EXT_SYNC1	MFP_CFG(GPIO12, AF6)
+#define GPIO0_2_HZ_CLK		MFP_CFG(GPIO0_2, AF1)
+#define GPIO14_HZ_CLK		MFP_CFG(GPIO14, AF4)
+#define GPIO30_ICP_RXD		MFP_CFG(GPIO30, AF1)
+#define GPIO31_ICP_TXD		MFP_CFG(GPIO31, AF1)
+
+#define GPIO83_KP_DKIN_0	MFP_CFG_LPM(GPIO83, AF3, FLOAT)
+#define GPIO84_KP_DKIN_1	MFP_CFG_LPM(GPIO84, AF3, FLOAT)
+#define GPIO85_KP_DKIN_2	MFP_CFG_LPM(GPIO85, AF3, FLOAT)
+#define GPIO86_KP_DKIN_3	MFP_CFG_LPM(GPIO86, AF3, FLOAT)
+
+#define GPIO105_KP_DKIN_0	MFP_CFG_LPM(GPIO105, AF2, FLOAT)
+#define GPIO106_KP_DKIN_1	MFP_CFG_LPM(GPIO106, AF2, FLOAT)
+#define GPIO107_KP_DKIN_2	MFP_CFG_LPM(GPIO107, AF2, FLOAT)
+#define GPIO108_KP_DKIN_3	MFP_CFG_LPM(GPIO108, AF2, FLOAT)
+#define GPIO109_KP_DKIN_4	MFP_CFG_LPM(GPIO109, AF2, FLOAT)
+#define GPIO110_KP_DKIN_5	MFP_CFG_LPM(GPIO110, AF2, FLOAT)
+#define GPIO111_KP_DKIN_6	MFP_CFG_LPM(GPIO111, AF2, FLOAT)
+#define GPIO112_KP_DKIN_7	MFP_CFG_LPM(GPIO112, AF2, FLOAT)
+
+#define GPIO113_KP_DKIN_0	MFP_CFG_LPM(GPIO113, AF2, FLOAT)
+#define GPIO114_KP_DKIN_1	MFP_CFG_LPM(GPIO114, AF2, FLOAT)
+#define GPIO115_KP_DKIN_2	MFP_CFG_LPM(GPIO115, AF2, FLOAT)
+#define GPIO116_KP_DKIN_3	MFP_CFG_LPM(GPIO116, AF2, FLOAT)
+#define GPIO117_KP_DKIN_4	MFP_CFG_LPM(GPIO117, AF2, FLOAT)
+#define GPIO118_KP_DKIN_5	MFP_CFG_LPM(GPIO118, AF2, FLOAT)
+#define GPIO119_KP_DKIN_6	MFP_CFG_LPM(GPIO119, AF2, FLOAT)
+#define GPIO120_KP_DKIN_7	MFP_CFG_LPM(GPIO120, AF2, FLOAT)
+
+#define GPIO127_KP_DKIN_0	MFP_CFG_LPM(GPIO127, AF2, FLOAT)
+#define GPIO126_KP_DKIN_1	MFP_CFG_LPM(GPIO126, AF2, FLOAT)
+
+#define GPIO2_2_KP_DKIN_0	MFP_CFG_LPM(GPIO2_2, AF2, FLOAT)
+#define GPIO3_2_KP_DKIN_1	MFP_CFG_LPM(GPIO3_2, AF2, FLOAT)
+#define GPIO125_KP_DKIN_2	MFP_CFG_LPM(GPIO125, AF2, FLOAT)
+#define GPIO124_KP_DKIN_3	MFP_CFG_LPM(GPIO124, AF2, FLOAT)
+#define GPIO123_KP_DKIN_4	MFP_CFG_LPM(GPIO123, AF2, FLOAT)
+#define GPIO122_KP_DKIN_5	MFP_CFG_LPM(GPIO122, AF2, FLOAT)
+#define GPIO121_KP_DKIN_6	MFP_CFG_LPM(GPIO121, AF2, FLOAT)
+#define GPIO4_2_KP_DKIN_7	MFP_CFG_LPM(GPIO4_2, AF2, FLOAT)
+
+#define GPIO113_KP_MKIN_0	MFP_CFG_LPM(GPIO113, AF1, FLOAT)
+#define GPIO114_KP_MKIN_1	MFP_CFG_LPM(GPIO114, AF1, FLOAT)
+#define GPIO115_KP_MKIN_2	MFP_CFG_LPM(GPIO115, AF1, FLOAT)
+#define GPIO116_KP_MKIN_3	MFP_CFG_LPM(GPIO116, AF1, FLOAT)
+#define GPIO117_KP_MKIN_4	MFP_CFG_LPM(GPIO117, AF1, FLOAT)
+#define GPIO118_KP_MKIN_5	MFP_CFG_LPM(GPIO118, AF1, FLOAT)
+#define GPIO119_KP_MKIN_6	MFP_CFG_LPM(GPIO119, AF1, FLOAT)
+#define GPIO120_KP_MKIN_7	MFP_CFG_LPM(GPIO120, AF1, FLOAT)
+
+#define GPIO83_KP_MKOUT_0	MFP_CFG_LPM(GPIO83, AF2, DRIVE_HIGH)
+#define GPIO84_KP_MKOUT_1	MFP_CFG_LPM(GPIO84, AF2, DRIVE_HIGH)
+#define GPIO85_KP_MKOUT_2	MFP_CFG_LPM(GPIO85, AF2, DRIVE_HIGH)
+#define GPIO86_KP_MKOUT_3	MFP_CFG_LPM(GPIO86, AF2, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_4	MFP_CFG_LPM(GPIO13, AF3, DRIVE_HIGH)
+#define GPIO14_KP_MKOUT_5	MFP_CFG_LPM(GPIO14, AF3, DRIVE_HIGH)
+
+#define GPIO121_KP_MKOUT_0	MFP_CFG_LPM(GPIO121, AF1, DRIVE_HIGH)
+#define GPIO122_KP_MKOUT_1	MFP_CFG_LPM(GPIO122, AF1, DRIVE_HIGH)
+#define GPIO123_KP_MKOUT_2	MFP_CFG_LPM(GPIO123, AF1, DRIVE_HIGH)
+#define GPIO124_KP_MKOUT_3	MFP_CFG_LPM(GPIO124, AF1, DRIVE_HIGH)
+#define GPIO125_KP_MKOUT_4	MFP_CFG_LPM(GPIO125, AF1, DRIVE_HIGH)
+#define GPIO126_KP_MKOUT_5	MFP_CFG_LPM(GPIO126, AF1, DRIVE_HIGH)
+#define GPIO127_KP_MKOUT_6	MFP_CFG_LPM(GPIO127, AF1, DRIVE_HIGH)
+#define GPIO5_2_KP_MKOUT_7	MFP_CFG_LPM(GPIO5_2, AF1, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO6_2_LCD_LDD_0	MFP_CFG_DRV(GPIO6_2, AF1, DS01X)
+#define GPIO7_2_LCD_LDD_1	MFP_CFG_DRV(GPIO7_2, AF1, DS01X)
+#define GPIO8_2_LCD_LDD_2	MFP_CFG_DRV(GPIO8_2, AF1, DS01X)
+#define GPIO9_2_LCD_LDD_3	MFP_CFG_DRV(GPIO9_2, AF1, DS01X)
+#define GPIO10_2_LCD_LDD_4	MFP_CFG_DRV(GPIO10_2, AF1, DS01X)
+#define GPIO11_2_LCD_LDD_5	MFP_CFG_DRV(GPIO11_2, AF1, DS01X)
+#define GPIO12_2_LCD_LDD_6	MFP_CFG_DRV(GPIO12_2, AF1, DS01X)
+#define GPIO13_2_LCD_LDD_7	MFP_CFG_DRV(GPIO13_2, AF1, DS01X)
+#define GPIO63_LCD_LDD_8	MFP_CFG_DRV(GPIO63, AF1, DS01X)
+#define GPIO64_LCD_LDD_9	MFP_CFG_DRV(GPIO64, AF1, DS01X)
+#define GPIO65_LCD_LDD_10	MFP_CFG_DRV(GPIO65, AF1, DS01X)
+#define GPIO66_LCD_LDD_11	MFP_CFG_DRV(GPIO66, AF1, DS01X)
+#define GPIO67_LCD_LDD_12	MFP_CFG_DRV(GPIO67, AF1, DS01X)
+#define GPIO68_LCD_LDD_13	MFP_CFG_DRV(GPIO68, AF1, DS01X)
+#define GPIO69_LCD_LDD_14	MFP_CFG_DRV(GPIO69, AF1, DS01X)
+#define GPIO70_LCD_LDD_15	MFP_CFG_DRV(GPIO70, AF1, DS01X)
+#define GPIO71_LCD_LDD_16	MFP_CFG_DRV(GPIO71, AF1, DS01X)
+#define GPIO72_LCD_LDD_17	MFP_CFG_DRV(GPIO72, AF1, DS01X)
+#define GPIO73_LCD_CS_N		MFP_CFG_DRV(GPIO73, AF2, DS01X)
+#define GPIO74_LCD_VSYNC	MFP_CFG_DRV(GPIO74, AF2, DS01X)
+#define GPIO14_2_LCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF1, DS01X)
+#define GPIO15_2_LCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF1, DS01X)
+#define GPIO16_2_LCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF1, DS01X)
+#define GPIO17_2_LCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF1, DS01X)
+#define GPIO64_LCD_VSYNC	MFP_CFG_DRV(GPIO64, AF2, DS01X)
+#define GPIO63_LCD_CS_N		MFP_CFG_DRV(GPIO63, AF2, DS01X)
+
+#define GPIO6_2_MLCD_DD_0	MFP_CFG_DRV(GPIO6_2, AF7, DS08X)
+#define GPIO7_2_MLCD_DD_1	MFP_CFG_DRV(GPIO7_2, AF7, DS08X)
+#define GPIO8_2_MLCD_DD_2	MFP_CFG_DRV(GPIO8_2, AF7, DS08X)
+#define GPIO9_2_MLCD_DD_3	MFP_CFG_DRV(GPIO9_2, AF7, DS08X)
+#define GPIO10_2_MLCD_DD_4	MFP_CFG_DRV(GPIO10_2, AF7, DS08X)
+#define GPIO11_2_MLCD_DD_5	MFP_CFG_DRV(GPIO11_2, AF7, DS08X)
+#define GPIO12_2_MLCD_DD_6	MFP_CFG_DRV(GPIO12_2, AF7, DS08X)
+#define GPIO13_2_MLCD_DD_7	MFP_CFG_DRV(GPIO13_2, AF7, DS08X)
+#define GPIO63_MLCD_DD_8	MFP_CFG_DRV(GPIO63, AF7, DS08X)
+#define GPIO64_MLCD_DD_9	MFP_CFG_DRV(GPIO64, AF7, DS08X)
+#define GPIO65_MLCD_DD_10	MFP_CFG_DRV(GPIO65, AF7, DS08X)
+#define GPIO66_MLCD_DD_11	MFP_CFG_DRV(GPIO66, AF7, DS08X)
+#define GPIO67_MLCD_DD_12	MFP_CFG_DRV(GPIO67, AF7, DS08X)
+#define GPIO68_MLCD_DD_13	MFP_CFG_DRV(GPIO68, AF7, DS08X)
+#define GPIO69_MLCD_DD_14	MFP_CFG_DRV(GPIO69, AF7, DS08X)
+#define GPIO70_MLCD_DD_15	MFP_CFG_DRV(GPIO70, AF7, DS08X)
+#define GPIO71_MLCD_DD_16	MFP_CFG_DRV(GPIO71, AF7, DS08X)
+#define GPIO72_MLCD_DD_17	MFP_CFG_DRV(GPIO72, AF7, DS08X)
+#define GPIO73_MLCD_CS		MFP_CFG_DRV(GPIO73, AF7, DS08X)
+#define GPIO74_MLCD_VSYNC	MFP_CFG_DRV(GPIO74, AF7, DS08X)
+#define GPIO14_2_MLCD_FCLK	MFP_CFG_DRV(GPIO14_2, AF7, DS08X)
+#define GPIO15_2_MLCD_LCLK	MFP_CFG_DRV(GPIO15_2, AF7, DS08X)
+#define GPIO16_2_MLCD_PCLK	MFP_CFG_DRV(GPIO16_2, AF7, DS08X)
+#define GPIO17_2_MLCD_BIAS	MFP_CFG_DRV(GPIO17_2, AF7, DS08X)
+
+/* MMC1 */
+#define GPIO9_MMC1_CMD		MFP_CFG_LPM(GPIO9,  AF4, DRIVE_HIGH)
+#define GPIO22_MMC1_CLK		MFP_CFG_LPM(GPIO22, AF4, DRIVE_HIGH)
+#define GPIO23_MMC1_CMD		MFP_CFG_LPM(GPIO23, AF4, DRIVE_HIGH)
+#define GPIO30_MMC1_CLK		MFP_CFG_LPM(GPIO30, AF4, DRIVE_HIGH)
+#define GPIO31_MMC1_CMD		MFP_CFG_LPM(GPIO31, AF4, DRIVE_HIGH)
+#define GPIO5_MMC1_DAT0		MFP_CFG_LPM(GPIO5,  AF4, DRIVE_HIGH)
+#define GPIO6_MMC1_DAT1		MFP_CFG_LPM(GPIO6,  AF4, DRIVE_HIGH)
+#define GPIO7_MMC1_DAT2		MFP_CFG_LPM(GPIO7,  AF4, DRIVE_HIGH)
+#define GPIO8_MMC1_DAT3		MFP_CFG_LPM(GPIO8,  AF4, DRIVE_HIGH)
+#define GPIO18_MMC1_DAT0	MFP_CFG_LPM(GPIO18, AF4, DRIVE_HIGH)
+#define GPIO19_MMC1_DAT1	MFP_CFG_LPM(GPIO19, AF4, DRIVE_HIGH)
+#define GPIO20_MMC1_DAT2	MFP_CFG_LPM(GPIO20, AF4, DRIVE_HIGH)
+#define GPIO21_MMC1_DAT3	MFP_CFG_LPM(GPIO21, AF4, DRIVE_HIGH)
+
+#define GPIO28_MMC2_CLK		MFP_CFG_LPM(GPIO28, AF4, PULL_HIGH)
+#define GPIO29_MMC2_CMD		MFP_CFG_LPM(GPIO29, AF4, PULL_HIGH)
+#define GPIO30_MMC2_CLK		MFP_CFG_LPM(GPIO30, AF3, PULL_HIGH)
+#define GPIO31_MMC2_CMD		MFP_CFG_LPM(GPIO31, AF3, PULL_HIGH)
+#define GPIO79_MMC2_CLK		MFP_CFG_LPM(GPIO79, AF4, PULL_HIGH)
+#define GPIO80_MMC2_CMD		MFP_CFG_LPM(GPIO80, AF4, PULL_HIGH)
+
+#define GPIO5_MMC2_DAT0		MFP_CFG_LPM(GPIO5, AF2, PULL_HIGH)
+#define GPIO6_MMC2_DAT1		MFP_CFG_LPM(GPIO6, AF2, PULL_HIGH)
+#define GPIO7_MMC2_DAT2		MFP_CFG_LPM(GPIO7, AF2, PULL_HIGH)
+#define GPIO8_MMC2_DAT3		MFP_CFG_LPM(GPIO8, AF2, PULL_HIGH)
+#define GPIO24_MMC2_DAT0	MFP_CFG_LPM(GPIO24, AF4, PULL_HIGH)
+#define GPIO75_MMC2_DAT0	MFP_CFG_LPM(GPIO75, AF4, PULL_HIGH)
+#define GPIO25_MMC2_DAT1	MFP_CFG_LPM(GPIO25, AF4, PULL_HIGH)
+#define GPIO76_MMC2_DAT1	MFP_CFG_LPM(GPIO76, AF4, PULL_HIGH)
+#define GPIO26_MMC2_DAT2	MFP_CFG_LPM(GPIO26, AF4, PULL_HIGH)
+#define GPIO77_MMC2_DAT2	MFP_CFG_LPM(GPIO77, AF4, PULL_HIGH)
+#define GPIO27_MMC2_DAT3	MFP_CFG_LPM(GPIO27, AF4, PULL_HIGH)
+#define GPIO78_MMC2_DAT3	MFP_CFG_LPM(GPIO78, AF4, PULL_HIGH)
+
+/* 1-Wire */
+#define GPIO14_ONE_WIRE		MFP_CFG_LPM(GPIO14,  AF5, FLOAT)
+#define GPIO0_2_ONE_WIRE	MFP_CFG_LPM(GPIO0_2, AF2, FLOAT)
+
+/* SSP1 */
+#define GPIO87_SSP1_EXTCLK	MFP_CFG(GPIO87, AF1)
+#define GPIO88_SSP1_SYSCLK	MFP_CFG(GPIO88, AF1)
+#define GPIO83_SSP1_SCLK	MFP_CFG(GPIO83, AF1)
+#define GPIO84_SSP1_SFRM	MFP_CFG(GPIO84, AF1)
+#define GPIO85_SSP1_RXD		MFP_CFG(GPIO85, AF6)
+#define GPIO85_SSP1_TXD		MFP_CFG(GPIO85, AF1)
+#define GPIO86_SSP1_RXD		MFP_CFG(GPIO86, AF1)
+#define GPIO86_SSP1_TXD		MFP_CFG(GPIO86, AF6)
+
+/* SSP2 */
+#define GPIO39_SSP2_EXTCLK	MFP_CFG(GPIO39, AF2)
+#define GPIO40_SSP2_SYSCLK	MFP_CFG(GPIO40, AF2)
+#define GPIO12_SSP2_SCLK	MFP_CFG(GPIO12, AF2)
+#define GPIO35_SSP2_SCLK	MFP_CFG(GPIO35, AF2)
+#define GPIO36_SSP2_SFRM	MFP_CFG(GPIO36, AF2)
+#define GPIO37_SSP2_RXD		MFP_CFG(GPIO37, AF5)
+#define GPIO37_SSP2_TXD		MFP_CFG(GPIO37, AF2)
+#define GPIO38_SSP2_RXD		MFP_CFG(GPIO38, AF2)
+#define GPIO38_SSP2_TXD		MFP_CFG(GPIO38, AF5)
+
+#define GPIO69_SSP3_SCLK	MFP_CFG_X(GPIO69, AF2, DS08X, FLOAT)
+#define GPIO70_SSP3_FRM		MFP_CFG_X(GPIO70, AF2, DS08X, DRIVE_LOW)
+#define GPIO89_SSP3_SCLK	MFP_CFG_X(GPIO89, AF1, DS08X, FLOAT)
+#define GPIO90_SSP3_FRM		MFP_CFG_X(GPIO90, AF1, DS08X, DRIVE_LOW)
+#define GPIO71_SSP3_RXD		MFP_CFG_X(GPIO71, AF5, DS08X, FLOAT)
+#define GPIO71_SSP3_TXD		MFP_CFG_X(GPIO71, AF2, DS08X, DRIVE_LOW)
+#define GPIO72_SSP3_RXD		MFP_CFG_X(GPIO72, AF2, DS08X, FLOAT)
+#define GPIO72_SSP3_TXD		MFP_CFG_X(GPIO72, AF5, DS08X, DRIVE_LOW)
+#define GPIO91_SSP3_RXD		MFP_CFG_X(GPIO91, AF5, DS08X, FLOAT)
+#define GPIO91_SSP3_TXD		MFP_CFG_X(GPIO91, AF1, DS08X, DRIVE_LOW)
+#define GPIO92_SSP3_RXD		MFP_CFG_X(GPIO92, AF1, DS08X, FLOAT)
+#define GPIO92_SSP3_TXD		MFP_CFG_X(GPIO92, AF5, DS08X, DRIVE_LOW)
+
+#define GPIO93_SSP4_SCLK	MFP_CFG_LPM(GPIO93, AF1, PULL_HIGH)
+#define GPIO94_SSP4_FRM		MFP_CFG_LPM(GPIO94, AF1, PULL_HIGH)
+#define GPIO94_SSP4_RXD		MFP_CFG_LPM(GPIO94, AF5, PULL_HIGH)
+#define GPIO95_SSP4_RXD		MFP_CFG_LPM(GPIO95, AF5, PULL_HIGH)
+#define GPIO95_SSP4_TXD		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_SSP4_RXD		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+#define GPIO96_SSP4_TXD		MFP_CFG_LPM(GPIO96, AF5, PULL_HIGH)
+
+/* UART1 */
+#define GPIO41_UART1_RXD	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO41_UART1_TXD	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_UART1_RXD	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+#define GPIO42_UART1_TXD	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO97_UART1_RXD	MFP_CFG_LPM(GPIO97, AF1, FLOAT)
+#define GPIO97_UART1_TXD	MFP_CFG_LPM(GPIO97, AF6, FLOAT)
+#define GPIO98_UART1_RXD	MFP_CFG_LPM(GPIO98, AF6, FLOAT)
+#define GPIO98_UART1_TXD	MFP_CFG_LPM(GPIO98, AF1, FLOAT)
+#define GPIO43_UART1_CTS	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO43_UART1_RTS	MFP_CFG_LPM(GPIO43, AF4, FLOAT)
+#define GPIO48_UART1_CTS	MFP_CFG_LPM(GPIO48, AF4, FLOAT)
+#define GPIO48_UART1_RTS	MFP_CFG_LPM(GPIO48, AF2, FLOAT)
+#define GPIO99_UART1_CTS	MFP_CFG_LPM(GPIO99, AF1, FLOAT)
+#define GPIO99_UART1_RTS	MFP_CFG_LPM(GPIO99, AF6, FLOAT)
+#define GPIO104_UART1_CTS	MFP_CFG_LPM(GPIO104, AF6, FLOAT)
+#define GPIO104_UART1_RTS	MFP_CFG_LPM(GPIO104, AF1, FLOAT)
+#define GPIO45_UART1_DTR	MFP_CFG_LPM(GPIO45, AF4, FLOAT)
+#define GPIO45_UART1_DSR	MFP_CFG_LPM(GPIO45, AF2, FLOAT)
+#define GPIO47_UART1_DTR	MFP_CFG_LPM(GPIO47, AF2, FLOAT)
+#define GPIO47_UART1_DSR	MFP_CFG_LPM(GPIO47, AF4, FLOAT)
+#define GPIO101_UART1_DTR	MFP_CFG_LPM(GPIO101, AF6, FLOAT)
+#define GPIO101_UART1_DSR	MFP_CFG_LPM(GPIO101, AF1, FLOAT)
+#define GPIO103_UART1_DTR	MFP_CFG_LPM(GPIO103, AF1, FLOAT)
+#define GPIO103_UART1_DSR	MFP_CFG_LPM(GPIO103, AF6, FLOAT)
+#define GPIO44_UART1_DCD	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO100_UART1_DCD	MFP_CFG_LPM(GPIO100, AF1, FLOAT)
+#define GPIO46_UART1_RI		MFP_CFG_LPM(GPIO46, AF2, FLOAT)
+#define GPIO102_UART1_RI	MFP_CFG_LPM(GPIO102, AF1, FLOAT)
+
+/* UART2 */
+#define GPIO109_UART2_CTS	MFP_CFG_LPM(GPIO109, AF3, FLOAT)
+#define GPIO109_UART2_RTS	MFP_CFG_LPM(GPIO109, AF1, FLOAT)
+#define GPIO112_UART2_CTS	MFP_CFG_LPM(GPIO112, AF1, FLOAT)
+#define GPIO112_UART2_RTS	MFP_CFG_LPM(GPIO112, AF3, FLOAT)
+#define GPIO110_UART2_RXD	MFP_CFG_LPM(GPIO110, AF1, FLOAT)
+#define GPIO110_UART2_TXD	MFP_CFG_LPM(GPIO110, AF3, FLOAT)
+#define GPIO111_UART2_RXD	MFP_CFG_LPM(GPIO111, AF3, FLOAT)
+#define GPIO111_UART2_TXD	MFP_CFG_LPM(GPIO111, AF1, FLOAT)
+
+/* UART3 */
+#define GPIO89_UART3_CTS	MFP_CFG_LPM(GPIO89, AF2, FLOAT)
+#define GPIO89_UART3_RTS	MFP_CFG_LPM(GPIO89, AF4, FLOAT)
+#define GPIO90_UART3_CTS	MFP_CFG_LPM(GPIO90, AF4, FLOAT)
+#define GPIO90_UART3_RTS	MFP_CFG_LPM(GPIO90, AF2, FLOAT)
+#define GPIO105_UART3_CTS	MFP_CFG_LPM(GPIO105, AF1, FLOAT)
+#define GPIO105_UART3_RTS	MFP_CFG_LPM(GPIO105, AF3, FLOAT)
+#define GPIO106_UART3_CTS	MFP_CFG_LPM(GPIO106, AF3, FLOAT)
+#define GPIO106_UART3_RTS	MFP_CFG_LPM(GPIO106, AF1, FLOAT)
+#define GPIO30_UART3_RXD	MFP_CFG_LPM(GPIO30, AF2, FLOAT)
+#define GPIO30_UART3_TXD	MFP_CFG_LPM(GPIO30, AF6, FLOAT)
+#define GPIO31_UART3_RXD	MFP_CFG_LPM(GPIO31, AF6, FLOAT)
+#define GPIO31_UART3_TXD	MFP_CFG_LPM(GPIO31, AF2, FLOAT)
+#define GPIO91_UART3_RXD	MFP_CFG_LPM(GPIO91, AF4, FLOAT)
+#define GPIO91_UART3_TXD	MFP_CFG_LPM(GPIO91, AF2, FLOAT)
+#define GPIO92_UART3_RXD	MFP_CFG_LPM(GPIO92, AF2, FLOAT)
+#define GPIO92_UART3_TXD	MFP_CFG_LPM(GPIO92, AF4, FLOAT)
+#define GPIO107_UART3_RXD	MFP_CFG_LPM(GPIO107, AF3, FLOAT)
+#define GPIO107_UART3_TXD	MFP_CFG_LPM(GPIO107, AF1, FLOAT)
+#define GPIO108_UART3_RXD	MFP_CFG_LPM(GPIO108, AF1, FLOAT)
+#define GPIO108_UART3_TXD	MFP_CFG_LPM(GPIO108, AF3, FLOAT)
+
+
+/* USB 2.0 UTMI */
+#define GPIO10_UTM_CLK		MFP_CFG(GPIO10, AF1)
+#define GPIO36_U2D_RXERROR	MFP_CFG(GPIO36, AF3)
+#define GPIO60_U2D_RXERROR	MFP_CFG(GPIO60, AF1)
+#define GPIO87_U2D_RXERROR	MFP_CFG(GPIO87, AF5)
+#define GPIO34_UTM_RXVALID	MFP_CFG(GPIO34, AF3)
+#define GPIO58_UTM_RXVALID	MFP_CFG(GPIO58, AF2)
+#define GPIO85_UTM_RXVALID	MFP_CFG(GPIO85, AF5)
+#define GPIO35_UTM_RXACTIVE	MFP_CFG(GPIO35, AF3)
+#define GPIO59_UTM_RXACTIVE	MFP_CFG(GPIO59, AF1)
+#define GPIO86_UTM_RXACTIVE	MFP_CFG(GPIO86, AF5)
+#define GPIO73_UTM_TXREADY	MFP_CFG(GPIO73, AF1)
+#define GPIO68_UTM_LINESTATE_0	MFP_CFG(GPIO68, AF3)
+#define GPIO90_UTM_LINESTATE_0	MFP_CFG(GPIO90, AF3)
+#define GPIO102_UTM_LINESTATE_0	MFP_CFG(GPIO102, AF3)
+#define GPIO107_UTM_LINESTATE_0	MFP_CFG(GPIO107, AF4)
+#define GPIO69_UTM_LINESTATE_1	MFP_CFG(GPIO69, AF3)
+#define GPIO91_UTM_LINESTATE_1	MFP_CFG(GPIO91, AF3)
+#define GPIO103_UTM_LINESTATE_1	MFP_CFG(GPIO103, AF3)
+
+#define GPIO41_U2D_PHYDATA_0	MFP_CFG(GPIO41, AF3)
+#define GPIO42_U2D_PHYDATA_1	MFP_CFG(GPIO42, AF3)
+#define GPIO43_U2D_PHYDATA_2	MFP_CFG(GPIO43, AF3)
+#define GPIO44_U2D_PHYDATA_3	MFP_CFG(GPIO44, AF3)
+#define GPIO45_U2D_PHYDATA_4	MFP_CFG(GPIO45, AF3)
+#define GPIO46_U2D_PHYDATA_5	MFP_CFG(GPIO46, AF3)
+#define GPIO47_U2D_PHYDATA_6	MFP_CFG(GPIO47, AF3)
+#define GPIO48_U2D_PHYDATA_7	MFP_CFG(GPIO48, AF3)
+
+#define GPIO49_U2D_PHYDATA_0	MFP_CFG(GPIO49, AF3)
+#define GPIO50_U2D_PHYDATA_1	MFP_CFG(GPIO50, AF3)
+#define GPIO51_U2D_PHYDATA_2	MFP_CFG(GPIO51, AF3)
+#define GPIO52_U2D_PHYDATA_3	MFP_CFG(GPIO52, AF3)
+#define GPIO53_U2D_PHYDATA_4	MFP_CFG(GPIO53, AF3)
+#define GPIO54_U2D_PHYDATA_5	MFP_CFG(GPIO54, AF3)
+#define GPIO55_U2D_PHYDATA_6	MFP_CFG(GPIO55, AF3)
+#define GPIO56_U2D_PHYDATA_7	MFP_CFG(GPIO56, AF3)
+
+#define GPIO37_U2D_OPMODE0	MFP_CFG(GPIO37, AF4)
+#define GPIO61_U2D_OPMODE0	MFP_CFG(GPIO61, AF2)
+#define GPIO88_U2D_OPMODE0	MFP_CFG(GPIO88, AF7)
+
+#define GPIO38_U2D_OPMODE1	MFP_CFG(GPIO38, AF4)
+#define GPIO62_U2D_OPMODE1	MFP_CFG(GPIO62, AF2)
+#define GPIO104_U2D_OPMODE1	MFP_CFG(GPIO104, AF4)
+#define GPIO108_U2D_OPMODE1	MFP_CFG(GPIO108, AF5)
+
+#define GPIO74_U2D_RESET	MFP_CFG(GPIO74, AF1)
+#define GPIO93_U2D_RESET	MFP_CFG(GPIO93, AF2)
+#define GPIO98_U2D_RESET	MFP_CFG(GPIO98, AF3)
+
+#define GPIO67_U2D_SUSPEND	MFP_CFG(GPIO67, AF3)
+#define GPIO96_U2D_SUSPEND	MFP_CFG(GPIO96, AF2)
+#define GPIO101_U2D_SUSPEND	MFP_CFG(GPIO101, AF3)
+
+#define GPIO66_U2D_TERM_SEL	MFP_CFG(GPIO66, AF5)
+#define GPIO95_U2D_TERM_SEL	MFP_CFG(GPIO95, AF3)
+#define GPIO97_U2D_TERM_SEL	MFP_CFG(GPIO97, AF7)
+#define GPIO100_U2D_TERM_SEL	MFP_CFG(GPIO100, AF5)
+
+#define GPIO39_U2D_TXVALID	MFP_CFG(GPIO39, AF4)
+#define GPIO70_U2D_TXVALID	MFP_CFG(GPIO70, AF5)
+#define GPIO83_U2D_TXVALID	MFP_CFG(GPIO83, AF7)
+
+#define GPIO65_U2D_XCVR_SEL	MFP_CFG(GPIO65, AF5)
+#define GPIO94_U2D_XCVR_SEL	MFP_CFG(GPIO94, AF3)
+#define GPIO99_U2D_XCVR_SEL	MFP_CFG(GPIO99, AF5)
+
+/* USB Host 1.1 */
+#define GPIO2_2_USBH_PEN	MFP_CFG(GPIO2_2, AF1)
+#define GPIO3_2_USBH_PWR	MFP_CFG(GPIO3_2, AF1)
+
+/* USB P2 */
+#define GPIO97_USB_P2_2		MFP_CFG(GPIO97, AF2)
+#define GPIO97_USB_P2_6		MFP_CFG(GPIO97, AF4)
+#define GPIO98_USB_P2_2		MFP_CFG(GPIO98, AF4)
+#define GPIO98_USB_P2_6		MFP_CFG(GPIO98, AF2)
+#define GPIO99_USB_P2_1		MFP_CFG(GPIO99, AF2)
+#define GPIO100_USB_P2_4	MFP_CFG(GPIO100, AF2)
+#define GPIO101_USB_P2_8	MFP_CFG(GPIO101, AF2)
+#define GPIO102_USB_P2_3	MFP_CFG(GPIO102, AF2)
+#define GPIO103_USB_P2_5	MFP_CFG(GPIO103, AF2)
+#define GPIO104_USB_P2_7	MFP_CFG(GPIO104, AF2)
+
+/* USB P3 */
+#define GPIO75_USB_P3_1		MFP_CFG(GPIO75, AF2)
+#define GPIO76_USB_P3_2		MFP_CFG(GPIO76, AF2)
+#define GPIO77_USB_P3_3		MFP_CFG(GPIO77, AF2)
+#define GPIO78_USB_P3_4		MFP_CFG(GPIO78, AF2)
+#define GPIO79_USB_P3_5		MFP_CFG(GPIO79, AF2)
+#define GPIO80_USB_P3_6		MFP_CFG(GPIO80, AF2)
+
+#define GPIO13_CHOUT0		MFP_CFG(GPIO13, AF6)
+#define GPIO14_CHOUT1		MFP_CFG(GPIO14, AF6)
+
+#define GPIO2_RDY		MFP_CFG(GPIO2, AF1)
+#define GPIO5_NPIOR		MFP_CFG(GPIO5, AF3)
+
+#define GPIO11_PWM0_OUT		MFP_CFG(GPIO11, AF1)
+#define GPIO12_PWM1_OUT		MFP_CFG(GPIO12, AF1)
+#define GPIO13_PWM2_OUT		MFP_CFG(GPIO13, AF1)
+#define GPIO14_PWM3_OUT		MFP_CFG(GPIO14, AF1)
+
+#endif /* __ASM_ARCH_MFP_PXA320_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
new file mode 100644
index 0000000..1f6b35c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa3xx.h
@@ -0,0 +1,252 @@
+#ifndef __ASM_ARCH_MFP_PXA3XX_H
+#define __ASM_ARCH_MFP_PXA3XX_H
+
+#define MFPR_BASE	(0x40e10000)
+#define MFPR_SIZE	(PAGE_SIZE)
+
+/* MFPR register bit definitions */
+#define MFPR_PULL_SEL		(0x1 << 15)
+#define MFPR_PULLUP_EN		(0x1 << 14)
+#define MFPR_PULLDOWN_EN	(0x1 << 13)
+#define MFPR_SLEEP_SEL		(0x1 << 9)
+#define MFPR_SLEEP_OE_N		(0x1 << 7)
+#define MFPR_EDGE_CLEAR		(0x1 << 6)
+#define MFPR_EDGE_FALL_EN	(0x1 << 5)
+#define MFPR_EDGE_RISE_EN	(0x1 << 4)
+
+#define MFPR_SLEEP_DATA(x)	((x) << 8)
+#define MFPR_DRIVE(x)		(((x) & 0x7) << 10)
+#define MFPR_AF_SEL(x)		(((x) & 0x7) << 0)
+
+#define MFPR_EDGE_NONE		(0)
+#define MFPR_EDGE_RISE		(MFPR_EDGE_RISE_EN)
+#define MFPR_EDGE_FALL		(MFPR_EDGE_FALL_EN)
+#define MFPR_EDGE_BOTH		(MFPR_EDGE_RISE | MFPR_EDGE_FALL)
+
+/*
+ * Table that determines the low power modes outputs, with actual settings
+ * used in parentheses for don't-care values. Except for the float output,
+ * the configured driven and pulled levels match, so if there is a need for
+ * non-LPM pulled output, the same configuration could probably be used.
+ *
+ * Output value  sleep_oe_n  sleep_data  pullup_en  pulldown_en  pull_sel
+ *                 (bit 7)    (bit 8)    (bit 14)     (bit 13)   (bit 15)
+ *
+ * Input            0          X(0)        X(0)        X(0)       0
+ * Drive 0          0          0           0           X(1)       0
+ * Drive 1          0          1           X(1)        0	  0
+ * Pull hi (1)      1          X(1)        1           0	  0
+ * Pull lo (0)      1          X(0)        0           1	  0
+ * Z (float)        1          X(0)        0           0	  0
+ */
+#define MFPR_LPM_INPUT		(0)
+#define MFPR_LPM_DRIVE_LOW	(MFPR_SLEEP_DATA(0) | MFPR_PULLDOWN_EN)
+#define MFPR_LPM_DRIVE_HIGH    	(MFPR_SLEEP_DATA(1) | MFPR_PULLUP_EN)
+#define MFPR_LPM_PULL_LOW      	(MFPR_LPM_DRIVE_LOW  | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_PULL_HIGH     	(MFPR_LPM_DRIVE_HIGH | MFPR_SLEEP_OE_N)
+#define MFPR_LPM_FLOAT         	(MFPR_SLEEP_OE_N)
+#define MFPR_LPM_MASK		(0xe080)
+
+/*
+ * The pullup and pulldown state of the MFP pin at run mode is by default
+ * determined by the selected alternate function. In case that some buggy
+ * devices need to override this default behavior,  the definitions below
+ * indicates the setting of corresponding MFPR bits
+ *
+ * Definition       pull_sel  pullup_en  pulldown_en
+ * MFPR_PULL_NONE       0         0        0
+ * MFPR_PULL_LOW        1         0        1
+ * MFPR_PULL_HIGH       1         1        0
+ * MFPR_PULL_BOTH       1         1        1
+ */
+#define MFPR_PULL_NONE		(0)
+#define MFPR_PULL_LOW		(MFPR_PULL_SEL | MFPR_PULLDOWN_EN)
+#define MFPR_PULL_BOTH		(MFPR_PULL_LOW | MFPR_PULLUP_EN)
+#define MFPR_PULL_HIGH		(MFPR_PULL_SEL | MFPR_PULLUP_EN)
+
+/* PXA3xx common MFP configurations - processor specific ones defined
+ * in mfp-pxa300.h and mfp-pxa320.h
+ */
+#define GPIO0_GPIO		MFP_CFG(GPIO0, AF0)
+#define GPIO1_GPIO		MFP_CFG(GPIO1, AF0)
+#define GPIO2_GPIO		MFP_CFG(GPIO2, AF0)
+#define GPIO3_GPIO		MFP_CFG(GPIO3, AF0)
+#define GPIO4_GPIO		MFP_CFG(GPIO4, AF0)
+#define GPIO5_GPIO		MFP_CFG(GPIO5, AF0)
+#define GPIO6_GPIO		MFP_CFG(GPIO6, AF0)
+#define GPIO7_GPIO		MFP_CFG(GPIO7, AF0)
+#define GPIO8_GPIO		MFP_CFG(GPIO8, AF0)
+#define GPIO9_GPIO		MFP_CFG(GPIO9, AF0)
+#define GPIO10_GPIO		MFP_CFG(GPIO10, AF0)
+#define GPIO11_GPIO		MFP_CFG(GPIO11, AF0)
+#define GPIO12_GPIO		MFP_CFG(GPIO12, AF0)
+#define GPIO13_GPIO		MFP_CFG(GPIO13, AF0)
+#define GPIO14_GPIO		MFP_CFG(GPIO14, AF0)
+#define GPIO15_GPIO		MFP_CFG(GPIO15, AF0)
+#define GPIO16_GPIO		MFP_CFG(GPIO16, AF0)
+#define GPIO17_GPIO		MFP_CFG(GPIO17, AF0)
+#define GPIO18_GPIO		MFP_CFG(GPIO18, AF0)
+#define GPIO19_GPIO		MFP_CFG(GPIO19, AF0)
+#define GPIO20_GPIO		MFP_CFG(GPIO20, AF0)
+#define GPIO21_GPIO		MFP_CFG(GPIO21, AF0)
+#define GPIO22_GPIO		MFP_CFG(GPIO22, AF0)
+#define GPIO23_GPIO		MFP_CFG(GPIO23, AF0)
+#define GPIO24_GPIO		MFP_CFG(GPIO24, AF0)
+#define GPIO25_GPIO		MFP_CFG(GPIO25, AF0)
+#define GPIO26_GPIO		MFP_CFG(GPIO26, AF0)
+#define GPIO27_GPIO		MFP_CFG(GPIO27, AF0)
+#define GPIO28_GPIO		MFP_CFG(GPIO28, AF0)
+#define GPIO29_GPIO		MFP_CFG(GPIO29, AF0)
+#define GPIO30_GPIO		MFP_CFG(GPIO30, AF0)
+#define GPIO31_GPIO		MFP_CFG(GPIO31, AF0)
+#define GPIO32_GPIO		MFP_CFG(GPIO32, AF0)
+#define GPIO33_GPIO		MFP_CFG(GPIO33, AF0)
+#define GPIO34_GPIO		MFP_CFG(GPIO34, AF0)
+#define GPIO35_GPIO		MFP_CFG(GPIO35, AF0)
+#define GPIO36_GPIO		MFP_CFG(GPIO36, AF0)
+#define GPIO37_GPIO		MFP_CFG(GPIO37, AF0)
+#define GPIO38_GPIO		MFP_CFG(GPIO38, AF0)
+#define GPIO39_GPIO		MFP_CFG(GPIO39, AF0)
+#define GPIO40_GPIO		MFP_CFG(GPIO40, AF0)
+#define GPIO41_GPIO		MFP_CFG(GPIO41, AF0)
+#define GPIO42_GPIO		MFP_CFG(GPIO42, AF0)
+#define GPIO43_GPIO		MFP_CFG(GPIO43, AF0)
+#define GPIO44_GPIO		MFP_CFG(GPIO44, AF0)
+#define GPIO45_GPIO		MFP_CFG(GPIO45, AF0)
+
+#define GPIO47_GPIO		MFP_CFG(GPIO47, AF0)
+#define GPIO48_GPIO		MFP_CFG(GPIO48, AF0)
+
+#define GPIO53_GPIO		MFP_CFG(GPIO53, AF0)
+#define GPIO54_GPIO		MFP_CFG(GPIO54, AF0)
+#define GPIO55_GPIO		MFP_CFG(GPIO55, AF0)
+
+#define GPIO57_GPIO		MFP_CFG(GPIO57, AF0)
+
+#define GPIO63_GPIO		MFP_CFG(GPIO63, AF0)
+#define GPIO64_GPIO		MFP_CFG(GPIO64, AF0)
+#define GPIO65_GPIO		MFP_CFG(GPIO65, AF0)
+#define GPIO66_GPIO		MFP_CFG(GPIO66, AF0)
+#define GPIO67_GPIO		MFP_CFG(GPIO67, AF0)
+#define GPIO68_GPIO		MFP_CFG(GPIO68, AF0)
+#define GPIO69_GPIO		MFP_CFG(GPIO69, AF0)
+#define GPIO70_GPIO		MFP_CFG(GPIO70, AF0)
+#define GPIO71_GPIO		MFP_CFG(GPIO71, AF0)
+#define GPIO72_GPIO		MFP_CFG(GPIO72, AF0)
+#define GPIO73_GPIO		MFP_CFG(GPIO73, AF0)
+#define GPIO74_GPIO		MFP_CFG(GPIO74, AF0)
+#define GPIO75_GPIO		MFP_CFG(GPIO75, AF0)
+#define GPIO76_GPIO		MFP_CFG(GPIO76, AF0)
+#define GPIO77_GPIO		MFP_CFG(GPIO77, AF0)
+#define GPIO78_GPIO		MFP_CFG(GPIO78, AF0)
+#define GPIO79_GPIO		MFP_CFG(GPIO79, AF0)
+#define GPIO80_GPIO		MFP_CFG(GPIO80, AF0)
+#define GPIO81_GPIO		MFP_CFG(GPIO81, AF0)
+#define GPIO82_GPIO		MFP_CFG(GPIO82, AF0)
+#define GPIO83_GPIO		MFP_CFG(GPIO83, AF0)
+#define GPIO84_GPIO		MFP_CFG(GPIO84, AF0)
+#define GPIO85_GPIO		MFP_CFG(GPIO85, AF0)
+#define GPIO86_GPIO		MFP_CFG(GPIO86, AF0)
+#define GPIO87_GPIO		MFP_CFG(GPIO87, AF0)
+#define GPIO88_GPIO		MFP_CFG(GPIO88, AF0)
+#define GPIO89_GPIO		MFP_CFG(GPIO89, AF0)
+#define GPIO90_GPIO		MFP_CFG(GPIO90, AF0)
+#define GPIO91_GPIO		MFP_CFG(GPIO91, AF0)
+#define GPIO92_GPIO		MFP_CFG(GPIO92, AF0)
+#define GPIO93_GPIO		MFP_CFG(GPIO93, AF0)
+#define GPIO94_GPIO		MFP_CFG(GPIO94, AF0)
+#define GPIO95_GPIO		MFP_CFG(GPIO95, AF0)
+#define GPIO96_GPIO		MFP_CFG(GPIO96, AF0)
+#define GPIO97_GPIO		MFP_CFG(GPIO97, AF0)
+#define GPIO98_GPIO		MFP_CFG(GPIO98, AF0)
+#define GPIO99_GPIO		MFP_CFG(GPIO99, AF0)
+#define GPIO100_GPIO		MFP_CFG(GPIO100, AF0)
+#define GPIO101_GPIO		MFP_CFG(GPIO101, AF0)
+#define GPIO102_GPIO		MFP_CFG(GPIO102, AF0)
+#define GPIO103_GPIO		MFP_CFG(GPIO103, AF0)
+#define GPIO104_GPIO		MFP_CFG(GPIO104, AF0)
+#define GPIO105_GPIO		MFP_CFG(GPIO105, AF0)
+#define GPIO106_GPIO		MFP_CFG(GPIO106, AF0)
+#define GPIO107_GPIO		MFP_CFG(GPIO107, AF0)
+#define GPIO108_GPIO		MFP_CFG(GPIO108, AF0)
+#define GPIO109_GPIO		MFP_CFG(GPIO109, AF0)
+#define GPIO110_GPIO		MFP_CFG(GPIO110, AF0)
+#define GPIO111_GPIO		MFP_CFG(GPIO111, AF0)
+#define GPIO112_GPIO		MFP_CFG(GPIO112, AF0)
+#define GPIO113_GPIO		MFP_CFG(GPIO113, AF0)
+#define GPIO114_GPIO		MFP_CFG(GPIO114, AF0)
+#define GPIO115_GPIO		MFP_CFG(GPIO115, AF0)
+#define GPIO116_GPIO		MFP_CFG(GPIO116, AF0)
+#define GPIO117_GPIO		MFP_CFG(GPIO117, AF0)
+#define GPIO118_GPIO		MFP_CFG(GPIO118, AF0)
+#define GPIO119_GPIO		MFP_CFG(GPIO119, AF0)
+#define GPIO120_GPIO		MFP_CFG(GPIO120, AF0)
+#define GPIO121_GPIO		MFP_CFG(GPIO121, AF0)
+#define GPIO122_GPIO		MFP_CFG(GPIO122, AF0)
+#define GPIO123_GPIO		MFP_CFG(GPIO123, AF0)
+#define GPIO124_GPIO		MFP_CFG(GPIO124, AF0)
+#define GPIO125_GPIO		MFP_CFG(GPIO125, AF0)
+#define GPIO126_GPIO		MFP_CFG(GPIO126, AF0)
+#define GPIO127_GPIO		MFP_CFG(GPIO127, AF0)
+
+#define GPIO0_2_GPIO		MFP_CFG(GPIO0_2, AF0)
+#define GPIO1_2_GPIO		MFP_CFG(GPIO1_2, AF0)
+#define GPIO2_2_GPIO		MFP_CFG(GPIO2_2, AF0)
+#define GPIO3_2_GPIO		MFP_CFG(GPIO3_2, AF0)
+#define GPIO4_2_GPIO		MFP_CFG(GPIO4_2, AF0)
+#define GPIO5_2_GPIO		MFP_CFG(GPIO5_2, AF0)
+#define GPIO6_2_GPIO		MFP_CFG(GPIO6_2, AF0)
+
+/*
+ * each MFP pin will have a MFPR register, since the offset of the
+ * register varies between processors, the processor specific code
+ * should initialize the pin offsets by pxa3xx_mfp_init_addr()
+ *
+ * pxa3xx_mfp_init_addr - accepts a table of "pxa3xx_mfp_addr_map"
+ * structure, which represents a range of MFP pins from "start" to
+ * "end", with the offset begining at "offset", to define a single
+ * pin, let "end" = -1
+ *
+ * use
+ *
+ * MFP_ADDR_X() to define a range of pins
+ * MFP_ADDR()   to define a single pin
+ * MFP_ADDR_END to signal the end of pin offset definitions
+ */
+struct pxa3xx_mfp_addr_map {
+	unsigned int	start;
+	unsigned int	end;
+	unsigned long	offset;
+};
+
+#define MFP_ADDR_X(start, end, offset) \
+	{ MFP_PIN_##start, MFP_PIN_##end, offset }
+
+#define MFP_ADDR(pin, offset) \
+	{ MFP_PIN_##pin, -1, offset }
+
+#define MFP_ADDR_END	{ MFP_PIN_INVALID, 0 }
+
+/*
+ * pxa3xx_mfp_read()/pxa3xx_mfp_write() - for direct read/write access
+ * to the MFPR register
+ */
+unsigned long pxa3xx_mfp_read(int mfp);
+void pxa3xx_mfp_write(int mfp, unsigned long mfpr_val);
+
+/*
+ * pxa3xx_mfp_config - configure the MFPR registers
+ *
+ * used by board specific initialization code
+ */
+void pxa3xx_mfp_config(unsigned long *mfp_cfgs, int num);
+
+/*
+ * pxa3xx_mfp_init_addr() - initialize the mapping between mfp pin
+ * index and MFPR register offset
+ *
+ * used by processor specific code
+ */
+void __init pxa3xx_mfp_init_addr(struct pxa3xx_mfp_addr_map *);
+void __init pxa3xx_init_mfp(void);
+#endif /* __ASM_ARCH_MFP_PXA3XX_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa930.h b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
new file mode 100644
index 0000000..fabd9b4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa930.h
@@ -0,0 +1,491 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp-pxa930.h
+ *
+ * PXA930 specific MFP configuration definitions
+ *
+ * Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_PXA9xx_H
+#define __ASM_ARCH_MFP_PXA9xx_H
+
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+
+/* GPIO */
+#define GPIO46_GPIO		MFP_CFG(GPIO46, AF0)
+#define GPIO49_GPIO		MFP_CFG(GPIO49, AF0)
+#define GPIO50_GPIO		MFP_CFG(GPIO50, AF0)
+#define GPIO51_GPIO		MFP_CFG(GPIO51, AF0)
+#define GPIO52_GPIO		MFP_CFG(GPIO52, AF0)
+#define GPIO56_GPIO		MFP_CFG(GPIO56, AF0)
+#define GPIO58_GPIO		MFP_CFG(GPIO58, AF0)
+#define GPIO59_GPIO		MFP_CFG(GPIO59, AF0)
+#define GPIO60_GPIO		MFP_CFG(GPIO60, AF0)
+#define GPIO61_GPIO		MFP_CFG(GPIO61, AF0)
+#define GPIO62_GPIO		MFP_CFG(GPIO62, AF0)
+
+#define GSIM_UCLK_GPIO_79	MFP_CFG(GSIM_UCLK, AF0)
+#define GSIM_UIO_GPIO_80	MFP_CFG(GSIM_UIO, AF0)
+#define GSIM_nURST_GPIO_81	MFP_CFG(GSIM_nURST, AF0)
+#define GSIM_UDET_GPIO_82	MFP_CFG(GSIM_UDET, AF0)
+
+#define DF_IO15_GPIO_28		MFP_CFG(DF_IO15, AF0)
+#define DF_IO14_GPIO_29		MFP_CFG(DF_IO14, AF0)
+#define DF_IO13_GPIO_30		MFP_CFG(DF_IO13, AF0)
+#define DF_IO12_GPIO_31		MFP_CFG(DF_IO12, AF0)
+#define DF_IO11_GPIO_32		MFP_CFG(DF_IO11, AF0)
+#define DF_IO10_GPIO_33		MFP_CFG(DF_IO10, AF0)
+#define DF_IO9_GPIO_34		MFP_CFG(DF_IO9, AF0)
+#define DF_IO8_GPIO_35		MFP_CFG(DF_IO8, AF0)
+#define DF_IO7_GPIO_36		MFP_CFG(DF_IO7, AF0)
+#define DF_IO6_GPIO_37		MFP_CFG(DF_IO6, AF0)
+#define DF_IO5_GPIO_38		MFP_CFG(DF_IO5, AF0)
+#define DF_IO4_GPIO_39		MFP_CFG(DF_IO4, AF0)
+#define DF_IO3_GPIO_40		MFP_CFG(DF_IO3, AF0)
+#define DF_IO2_GPIO_41		MFP_CFG(DF_IO2, AF0)
+#define DF_IO1_GPIO_42		MFP_CFG(DF_IO1, AF0)
+#define DF_IO0_GPIO_43		MFP_CFG(DF_IO0, AF0)
+#define DF_nCS0_GPIO_44		MFP_CFG(DF_nCS0, AF0)
+#define DF_nCS1_GPIO_45		MFP_CFG(DF_nCS1, AF0)
+#define DF_nWE_GPIO_46		MFP_CFG(DF_nWE, AF0)
+#define DF_nRE_nOE_GPIO_47	MFP_CFG(DF_nRE_nOE, AF0)
+#define DF_CLE_nOE_GPIO_48	MFP_CFG(DF_CLE_nOE, AF0)
+#define DF_nADV1_ALE_GPIO_49	MFP_CFG(DF_nADV1_ALE, AF0)
+#define DF_nADV2_ALE_GPIO_50	MFP_CFG(DF_nADV2_ALE, AF0)
+#define DF_INT_RnB_GPIO_51	MFP_CFG(DF_INT_RnB, AF0)
+#define DF_SCLK_E_GPIO_52	MFP_CFG(DF_SCLK_E, AF0)
+
+#define DF_ADDR0_GPIO_53	MFP_CFG(DF_ADDR0, AF0)
+#define DF_ADDR1_GPIO_54	MFP_CFG(DF_ADDR1, AF0)
+#define DF_ADDR2_GPIO_55	MFP_CFG(DF_ADDR2, AF0)
+#define DF_ADDR3_GPIO_56	MFP_CFG(DF_ADDR3, AF0)
+#define nXCVREN_GPIO_57		MFP_CFG(nXCVREN, AF0)
+#define nLUA_GPIO_58		MFP_CFG(nLUA, AF0)
+#define nLLA_GPIO_59		MFP_CFG(nLLA, AF0)
+#define nBE0_GPIO_60		MFP_CFG(nBE0, AF0)
+#define nBE1_GPIO_61		MFP_CFG(nBE1, AF0)
+#define RDY_GPIO_62		MFP_CFG(RDY, AF0)
+
+/* Chip Select */
+#define DF_nCS0_nCS2		MFP_CFG_LPM(DF_nCS0, AF3, PULL_HIGH)
+#define DF_nCS1_nCS3		MFP_CFG_LPM(DF_nCS1, AF3, PULL_HIGH)
+
+/* AC97 */
+#define GPIO83_BAC97_SYSCLK	MFP_CFG(GPIO83, AF3)
+#define GPIO84_BAC97_SDATA_IN0	MFP_CFG(GPIO84, AF3)
+#define GPIO85_BAC97_BITCLK	MFP_CFG(GPIO85, AF3)
+#define GPIO86_BAC97_nRESET	MFP_CFG(GPIO86, AF3)
+#define GPIO87_BAC97_SYNC	MFP_CFG(GPIO87, AF3)
+#define GPIO88_BAC97_SDATA_OUT	MFP_CFG(GPIO88, AF3)
+
+/* I2C */
+#define GPIO39_CI2C_SCL		MFP_CFG_LPM(GPIO39, AF3, PULL_HIGH)
+#define GPIO40_CI2C_SDA		MFP_CFG_LPM(GPIO40, AF3, PULL_HIGH)
+
+#define GPIO51_CI2C_SCL		MFP_CFG_LPM(GPIO51, AF3, PULL_HIGH)
+#define GPIO52_CI2C_SDA		MFP_CFG_LPM(GPIO52, AF3, PULL_HIGH)
+
+#define GPIO63_CI2C_SCL		MFP_CFG_LPM(GPIO63, AF4, PULL_HIGH)
+#define GPIO64_CI2C_SDA		MFP_CFG_LPM(GPIO64, AF4, PULL_HIGH)
+
+#define GPIO77_CI2C_SCL		MFP_CFG_LPM(GPIO77, AF2, PULL_HIGH)
+#define GPIO78_CI2C_SDA		MFP_CFG_LPM(GPIO78, AF2, PULL_HIGH)
+
+#define GPIO89_CI2C_SCL		MFP_CFG_LPM(GPIO89, AF1, PULL_HIGH)
+#define GPIO90_CI2C_SDA		MFP_CFG_LPM(GPIO90, AF1, PULL_HIGH)
+
+#define GPIO95_CI2C_SCL		MFP_CFG_LPM(GPIO95, AF1, PULL_HIGH)
+#define GPIO96_CI2C_SDA		MFP_CFG_LPM(GPIO96, AF1, PULL_HIGH)
+
+#define GPIO97_CI2C_SCL		MFP_CFG_LPM(GPIO97, AF3, PULL_HIGH)
+#define GPIO98_CI2C_SDA		MFP_CFG_LPM(GPIO98, AF3, PULL_HIGH)
+
+/* QCI */
+#define GPIO63_CI_DD_9		MFP_CFG_LPM(GPIO63, AF1, PULL_LOW)
+#define GPIO64_CI_DD_8		MFP_CFG_LPM(GPIO64, AF1, PULL_LOW)
+#define GPIO65_CI_DD_7		MFP_CFG_LPM(GPIO65, AF1, PULL_LOW)
+#define GPIO66_CI_DD_6		MFP_CFG_LPM(GPIO66, AF1, PULL_LOW)
+#define GPIO67_CI_DD_5		MFP_CFG_LPM(GPIO67, AF1, PULL_LOW)
+#define GPIO68_CI_DD_4		MFP_CFG_LPM(GPIO68, AF1, PULL_LOW)
+#define GPIO69_CI_DD_3		MFP_CFG_LPM(GPIO69, AF1, PULL_LOW)
+#define GPIO70_CI_DD_2		MFP_CFG_LPM(GPIO70, AF1, PULL_LOW)
+#define GPIO71_CI_DD_1		MFP_CFG_LPM(GPIO71, AF1, PULL_LOW)
+#define GPIO72_CI_DD_0		MFP_CFG_LPM(GPIO72, AF1, PULL_LOW)
+#define GPIO73_CI_HSYNC		MFP_CFG_LPM(GPIO73, AF1, PULL_LOW)
+#define GPIO74_CI_VSYNC		MFP_CFG_LPM(GPIO74, AF1, PULL_LOW)
+#define GPIO75_CI_MCLK		MFP_CFG_LPM(GPIO75, AF1, PULL_LOW)
+#define GPIO76_CI_PCLK		MFP_CFG_LPM(GPIO76, AF1, PULL_LOW)
+
+/* KEYPAD */
+#define GPIO4_KP_DKIN_4		MFP_CFG_LPM(GPIO4, AF3, FLOAT)
+#define GPIO5_KP_DKIN_5		MFP_CFG_LPM(GPIO5, AF3, FLOAT)
+#define GPIO6_KP_DKIN_6		MFP_CFG_LPM(GPIO6, AF3, FLOAT)
+#define GPIO7_KP_DKIN_7		MFP_CFG_LPM(GPIO7, AF3, FLOAT)
+#define GPIO8_KP_DKIN_4		MFP_CFG_LPM(GPIO8, AF3, FLOAT)
+#define GPIO9_KP_DKIN_5		MFP_CFG_LPM(GPIO9, AF3, FLOAT)
+#define GPIO10_KP_DKIN_6	MFP_CFG_LPM(GPIO10, AF3, FLOAT)
+#define GPIO11_KP_DKIN_7	MFP_CFG_LPM(GPIO11, AF3, FLOAT)
+
+#define GPIO12_KP_DKIN_0	MFP_CFG_LPM(GPIO12, AF2, FLOAT)
+#define GPIO13_KP_DKIN_1	MFP_CFG_LPM(GPIO13, AF2, FLOAT)
+#define GPIO14_KP_DKIN_2	MFP_CFG_LPM(GPIO14, AF2, FLOAT)
+#define GPIO15_KP_DKIN_3	MFP_CFG_LPM(GPIO15, AF2, FLOAT)
+
+#define GPIO41_KP_DKIN_0	MFP_CFG_LPM(GPIO41, AF2, FLOAT)
+#define GPIO42_KP_DKIN_1	MFP_CFG_LPM(GPIO42, AF2, FLOAT)
+#define GPIO43_KP_DKIN_2	MFP_CFG_LPM(GPIO43, AF2, FLOAT)
+#define GPIO44_KP_DKIN_3	MFP_CFG_LPM(GPIO44, AF2, FLOAT)
+#define GPIO41_KP_DKIN_4	MFP_CFG_LPM(GPIO41, AF4, FLOAT)
+#define GPIO42_KP_DKIN_5	MFP_CFG_LPM(GPIO42, AF4, FLOAT)
+
+#define GPIO0_KP_MKIN_0		MFP_CFG_LPM(GPIO0, AF1, FLOAT)
+#define GPIO2_KP_MKIN_1		MFP_CFG_LPM(GPIO2, AF1, FLOAT)
+#define GPIO4_KP_MKIN_2		MFP_CFG_LPM(GPIO4, AF1, FLOAT)
+#define GPIO6_KP_MKIN_3		MFP_CFG_LPM(GPIO6, AF1, FLOAT)
+#define GPIO8_KP_MKIN_4		MFP_CFG_LPM(GPIO8, AF1, FLOAT)
+#define GPIO10_KP_MKIN_5	MFP_CFG_LPM(GPIO10, AF1, FLOAT)
+#define GPIO12_KP_MKIN_6	MFP_CFG_LPM(GPIO12, AF1, FLOAT)
+#define GPIO14_KP_MKIN_7	MFP_CFG(GPIO14, AF1)
+#define GPIO35_KP_MKIN_5	MFP_CFG(GPIO35, AF4)
+
+#define GPIO1_KP_MKOUT_0	MFP_CFG_LPM(GPIO1, AF1, DRIVE_HIGH)
+#define GPIO3_KP_MKOUT_1	MFP_CFG_LPM(GPIO3, AF1, DRIVE_HIGH)
+#define GPIO5_KP_MKOUT_2	MFP_CFG_LPM(GPIO5, AF1, DRIVE_HIGH)
+#define GPIO7_KP_MKOUT_3	MFP_CFG_LPM(GPIO7, AF1, DRIVE_HIGH)
+#define GPIO9_KP_MKOUT_4	MFP_CFG_LPM(GPIO9, AF1, DRIVE_HIGH)
+#define GPIO11_KP_MKOUT_5	MFP_CFG_LPM(GPIO11, AF1, DRIVE_HIGH)
+#define GPIO13_KP_MKOUT_6	MFP_CFG_LPM(GPIO13, AF1, DRIVE_HIGH)
+#define GPIO15_KP_MKOUT_7	MFP_CFG_LPM(GPIO15, AF1, DRIVE_HIGH)
+#define GPIO36_KP_MKOUT_5	MFP_CFG_LPM(GPIO36, AF4, DRIVE_HIGH)
+
+/* LCD */
+#define GPIO17_LCD_FCLK_RD	MFP_CFG(GPIO17, AF1)
+#define GPIO18_LCD_LCLK_A0	MFP_CFG(GPIO18, AF1)
+#define GPIO19_LCD_PCLK_WR	MFP_CFG(GPIO19, AF1)
+#define GPIO20_LCD_BIAS		MFP_CFG(GPIO20, AF1)
+#define GPIO21_LCD_CS		MFP_CFG(GPIO21, AF1)
+#define GPIO22_LCD_CS2		MFP_CFG(GPIO22, AF2)
+#define GPIO22_LCD_VSYNC	MFP_CFG(GPIO22, AF1)
+#define GPIO23_LCD_DD0		MFP_CFG(GPIO23, AF1)
+#define GPIO24_LCD_DD1		MFP_CFG(GPIO24, AF1)
+#define GPIO25_LCD_DD2		MFP_CFG(GPIO25, AF1)
+#define GPIO26_LCD_DD3		MFP_CFG(GPIO26, AF1)
+#define GPIO27_LCD_DD4		MFP_CFG(GPIO27, AF1)
+#define GPIO28_LCD_DD5		MFP_CFG(GPIO28, AF1)
+#define GPIO29_LCD_DD6		MFP_CFG(GPIO29, AF1)
+#define GPIO30_LCD_DD7		MFP_CFG(GPIO30, AF1)
+#define GPIO31_LCD_DD8		MFP_CFG(GPIO31, AF1)
+#define GPIO32_LCD_DD9		MFP_CFG(GPIO32, AF1)
+#define GPIO33_LCD_DD10		MFP_CFG(GPIO33, AF1)
+#define GPIO34_LCD_DD11		MFP_CFG(GPIO34, AF1)
+#define GPIO35_LCD_DD12		MFP_CFG(GPIO35, AF1)
+#define GPIO36_LCD_DD13		MFP_CFG(GPIO36, AF1)
+#define GPIO37_LCD_DD14		MFP_CFG(GPIO37, AF1)
+#define GPIO38_LCD_DD15		MFP_CFG(GPIO38, AF1)
+#define GPIO39_LCD_DD16		MFP_CFG(GPIO39, AF1)
+#define GPIO40_LCD_DD17		MFP_CFG(GPIO40, AF1)
+#define GPIO41_LCD_CS2		MFP_CFG(GPIO41, AF3)
+#define GPIO42_LCD_VSYNC2	MFP_CFG(GPIO42, AF3)
+#define GPIO44_LCD_DD7		MFP_CFG(GPIO44, AF1)
+
+/* Mini-LCD */
+#define GPIO17_MLCD_FCLK	MFP_CFG(GPIO17, AF3)
+#define GPIO18_MLCD_LCLK	MFP_CFG(GPIO18, AF3)
+#define GPIO19_MLCD_PCLK	MFP_CFG(GPIO19, AF3)
+#define GPIO20_MLCD_BIAS	MFP_CFG(GPIO20, AF3)
+#define GPIO23_MLCD_DD0		MFP_CFG(GPIO23, AF3)
+#define GPIO24_MLCD_DD1		MFP_CFG(GPIO24, AF3)
+#define GPIO25_MLCD_DD2		MFP_CFG(GPIO25, AF3)
+#define GPIO26_MLCD_DD3		MFP_CFG(GPIO26, AF3)
+#define GPIO27_MLCD_DD4		MFP_CFG(GPIO27, AF3)
+#define GPIO28_MLCD_DD5		MFP_CFG(GPIO28, AF3)
+#define GPIO29_MLCD_DD6		MFP_CFG(GPIO29, AF3)
+#define GPIO30_MLCD_DD7		MFP_CFG(GPIO30, AF3)
+#define GPIO31_MLCD_DD8		MFP_CFG(GPIO31, AF3)
+#define GPIO32_MLCD_DD9		MFP_CFG(GPIO32, AF3)
+#define GPIO33_MLCD_DD10	MFP_CFG(GPIO33, AF3)
+#define GPIO34_MLCD_DD11	MFP_CFG(GPIO34, AF3)
+#define GPIO35_MLCD_DD12	MFP_CFG(GPIO35, AF3)
+#define GPIO36_MLCD_DD13	MFP_CFG(GPIO36, AF3)
+#define GPIO37_MLCD_DD14	MFP_CFG(GPIO37, AF3)
+#define GPIO38_MLCD_DD15	MFP_CFG(GPIO38, AF3)
+#define GPIO44_MLCD_DD7		MFP_CFG(GPIO44, AF5)
+
+/* MMC1 */
+#define GPIO10_MMC1_DAT3	MFP_CFG(GPIO10, AF4)
+#define GPIO11_MMC1_DAT2	MFP_CFG(GPIO11, AF4)
+#define GPIO12_MMC1_DAT1	MFP_CFG(GPIO12, AF4)
+#define GPIO13_MMC1_DAT0	MFP_CFG(GPIO13, AF4)
+#define GPIO14_MMC1_CMD		MFP_CFG(GPIO14, AF4)
+#define GPIO15_MMC1_CLK		MFP_CFG(GPIO15, AF4)
+#define GPIO55_MMC1_CMD		MFP_CFG(GPIO55, AF3)
+#define GPIO56_MMC1_CLK		MFP_CFG(GPIO56, AF3)
+#define GPIO57_MMC1_DAT0	MFP_CFG(GPIO57, AF3)
+#define GPIO58_MMC1_DAT1	MFP_CFG(GPIO58, AF3)
+#define GPIO59_MMC1_DAT2	MFP_CFG(GPIO59, AF3)
+#define GPIO60_MMC1_DAT3	MFP_CFG(GPIO60, AF3)
+
+#define DF_ADDR0_MMC1_CLK	MFP_CFG(DF_ADDR0, AF2)
+#define DF_ADDR1_MMC1_CMD	MFP_CFG(DF_ADDR1, AF2)
+#define DF_ADDR2_MMC1_DAT0	MFP_CFG(DF_ADDR2, AF2)
+#define DF_ADDR3_MMC1_DAT1	MFP_CFG(DF_ADDR3, AF3)
+#define nXCVREN_MMC1_DAT2	MFP_CFG(nXCVREN, AF2)
+
+/* MMC2 */
+#define GPIO31_MMC2_CMD		MFP_CFG(GPIO31, AF7)
+#define GPIO32_MMC2_CLK		MFP_CFG(GPIO32, AF7)
+#define GPIO33_MMC2_DAT0	MFP_CFG(GPIO33, AF7)
+#define GPIO34_MMC2_DAT1	MFP_CFG(GPIO34, AF7)
+#define GPIO35_MMC2_DAT2	MFP_CFG(GPIO35, AF7)
+#define GPIO36_MMC2_DAT3	MFP_CFG(GPIO36, AF7)
+
+#define GPIO101_MMC2_DAT3	MFP_CFG(GPIO101, AF1)
+#define GPIO102_MMC2_DAT2	MFP_CFG(GPIO102, AF1)
+#define GPIO103_MMC2_DAT1	MFP_CFG(GPIO103, AF1)
+#define GPIO104_MMC2_DAT0	MFP_CFG(GPIO104, AF1)
+#define GPIO105_MMC2_CMD	MFP_CFG(GPIO105, AF1)
+#define GPIO106_MMC2_CLK	MFP_CFG(GPIO106, AF1)
+
+#define DF_IO10_MMC2_DAT3	MFP_CFG(DF_IO10, AF3)
+#define DF_IO11_MMC2_DAT2	MFP_CFG(DF_IO11, AF3)
+#define DF_IO12_MMC2_DAT1	MFP_CFG(DF_IO12, AF3)
+#define DF_IO13_MMC2_DAT0	MFP_CFG(DF_IO13, AF3)
+#define DF_IO14_MMC2_CLK	MFP_CFG(DF_IO14, AF3)
+#define DF_IO15_MMC2_CMD	MFP_CFG(DF_IO15, AF3)
+
+/* BSSP1 */
+#define GPIO12_BSSP1_CLK	MFP_CFG(GPIO12, AF3)
+#define GPIO13_BSSP1_FRM	MFP_CFG(GPIO13, AF3)
+#define GPIO14_BSSP1_RXD	MFP_CFG(GPIO14, AF3)
+#define GPIO15_BSSP1_TXD	MFP_CFG(GPIO15, AF3)
+#define GPIO97_BSSP1_CLK	MFP_CFG(GPIO97, AF5)
+#define GPIO98_BSSP1_FRM	MFP_CFG(GPIO98, AF5)
+
+/* BSSP2 */
+#define GPIO84_BSSP2_SDATA_IN	MFP_CFG(GPIO84, AF1)
+#define GPIO85_BSSP2_BITCLK	MFP_CFG(GPIO85, AF1)
+#define GPIO86_BSSP2_SYSCLK	MFP_CFG(GPIO86, AF1)
+#define GPIO87_BSSP2_SYNC	MFP_CFG(GPIO87, AF1)
+#define GPIO88_BSSP2_DATA_OUT	MFP_CFG(GPIO88, AF1)
+#define GPIO86_BSSP2_SDATA_IN	MFP_CFG(GPIO86, AF4)
+
+/* BSSP3 */
+#define GPIO79_BSSP3_CLK	MFP_CFG(GPIO79, AF1)
+#define GPIO80_BSSP3_FRM	MFP_CFG(GPIO80, AF1)
+#define GPIO81_BSSP3_TXD	MFP_CFG(GPIO81, AF1)
+#define GPIO82_BSSP3_RXD	MFP_CFG(GPIO82, AF1)
+#define GPIO83_BSSP3_SYSCLK	MFP_CFG(GPIO83, AF1)
+
+/* BSSP4 */
+#define GPIO43_BSSP4_CLK	MFP_CFG(GPIO43, AF4)
+#define GPIO44_BSSP4_FRM	MFP_CFG(GPIO44, AF4)
+#define GPIO45_BSSP4_TXD	MFP_CFG(GPIO45, AF4)
+#define GPIO46_BSSP4_RXD	MFP_CFG(GPIO46, AF4)
+
+#define GPIO51_BSSP4_CLK	MFP_CFG(GPIO51, AF4)
+#define GPIO52_BSSP4_FRM	MFP_CFG(GPIO52, AF4)
+#define GPIO53_BSSP4_TXD	MFP_CFG(GPIO53, AF4)
+#define GPIO54_BSSP4_RXD	MFP_CFG(GPIO54, AF4)
+
+/* GSSP1 */
+#define GPIO79_GSSP1_CLK	MFP_CFG(GPIO79, AF2)
+#define GPIO80_GSSP1_FRM	MFP_CFG(GPIO80, AF2)
+#define GPIO81_GSSP1_TXD	MFP_CFG(GPIO81, AF2)
+#define GPIO82_GSSP1_RXD	MFP_CFG(GPIO82, AF2)
+#define GPIO83_GSSP1_SYSCLK	MFP_CFG(GPIO83, AF2)
+
+#define GPIO93_GSSP1_CLK	MFP_CFG(GPIO93, AF4)
+#define GPIO94_GSSP1_FRM	MFP_CFG(GPIO94, AF4)
+#define GPIO95_GSSP1_TXD	MFP_CFG(GPIO95, AF4)
+#define GPIO96_GSSP1_RXD	MFP_CFG(GPIO96, AF4)
+
+/* GSSP2 */
+#define GPIO47_GSSP2_CLK	MFP_CFG(GPIO47, AF4)
+#define GPIO48_GSSP2_FRM	MFP_CFG(GPIO48, AF4)
+#define GPIO49_GSSP2_RXD	MFP_CFG(GPIO49, AF4)
+#define GPIO50_GSSP2_TXD	MFP_CFG(GPIO50, AF4)
+
+#define GPIO69_GSSP2_CLK	MFP_CFG(GPIO69, AF4)
+#define GPIO70_GSSP2_FRM	MFP_CFG(GPIO70, AF4)
+#define GPIO71_GSSP2_RXD	MFP_CFG(GPIO71, AF4)
+#define GPIO72_GSSP2_TXD	MFP_CFG(GPIO72, AF4)
+
+#define GPIO84_GSSP2_RXD	MFP_CFG(GPIO84, AF2)
+#define GPIO85_GSSP2_CLK	MFP_CFG(GPIO85, AF2)
+#define GPIO86_GSSP2_SYSCLK	MFP_CFG(GPIO86, AF2)
+#define GPIO87_GSSP2_FRM	MFP_CFG(GPIO87, AF2)
+#define GPIO88_GSSP2_TXD	MFP_CFG(GPIO88, AF2)
+#define GPIO86_GSSP2_RXD	MFP_CFG(GPIO86, AF5)
+
+#define GPIO103_GSSP2_CLK	MFP_CFG(GPIO103, AF2)
+#define GPIO104_GSSP2_FRM	MFP_CFG(GPIO104, AF2)
+#define GPIO105_GSSP2_RXD	MFP_CFG(GPIO105, AF2)
+#define GPIO106_GSSP2_TXD	MFP_CFG(GPIO106, AF2)
+
+/* UART1 - FFUART */
+#define GPIO47_UART1_DSR_N	MFP_CFG(GPIO47, AF1)
+#define GPIO48_UART1_DTR_N	MFP_CFG(GPIO48, AF1)
+#define GPIO49_UART1_RI		MFP_CFG(GPIO49, AF1)
+#define GPIO50_UART1_DCD	MFP_CFG(GPIO50, AF1)
+#define GPIO51_UART1_CTS	MFP_CFG(GPIO51, AF1)
+#define GPIO52_UART1_RTS	MFP_CFG(GPIO52, AF1)
+#define GPIO53_UART1_RXD	MFP_CFG(GPIO53, AF1)
+#define GPIO54_UART1_TXD	MFP_CFG(GPIO54, AF1)
+
+#define GPIO63_UART1_TXD	MFP_CFG(GPIO63, AF2)
+#define GPIO64_UART1_RXD	MFP_CFG(GPIO64, AF2)
+#define GPIO65_UART1_DSR	MFP_CFG(GPIO65, AF2)
+#define GPIO66_UART1_DTR	MFP_CFG(GPIO66, AF2)
+#define GPIO67_UART1_RI		MFP_CFG(GPIO67, AF2)
+#define GPIO68_UART1_DCD	MFP_CFG(GPIO68, AF2)
+#define GPIO69_UART1_CTS	MFP_CFG(GPIO69, AF2)
+#define GPIO70_UART1_RTS	MFP_CFG(GPIO70, AF2)
+
+/* UART2 - BTUART */
+#define GPIO91_UART2_RXD	MFP_CFG(GPIO91, AF1)
+#define GPIO92_UART2_TXD	MFP_CFG(GPIO92, AF1)
+#define GPIO93_UART2_CTS	MFP_CFG(GPIO93, AF1)
+#define GPIO94_UART2_RTS	MFP_CFG(GPIO94, AF1)
+
+/* UART3 - STUART */
+#define GPIO43_UART3_RTS	MFP_CFG(GPIO43, AF3)
+#define GPIO44_UART3_CTS	MFP_CFG(GPIO44, AF3)
+#define GPIO45_UART3_RXD	MFP_CFG(GPIO45, AF3)
+#define GPIO46_UART3_TXD	MFP_CFG(GPIO46, AF3)
+
+#define GPIO75_UART3_RTS	MFP_CFG(GPIO75, AF5)
+#define GPIO76_UART3_CTS	MFP_CFG(GPIO76, AF5)
+#define GPIO77_UART3_TXD	MFP_CFG(GPIO77, AF5)
+#define GPIO78_UART3_RXD	MFP_CFG(GPIO78, AF5)
+
+/* DFI */
+#define DF_IO0_DF_IO0		MFP_CFG(DF_IO0, AF2)
+#define DF_IO1_DF_IO1		MFP_CFG(DF_IO1, AF2)
+#define DF_IO2_DF_IO2		MFP_CFG(DF_IO2, AF2)
+#define DF_IO3_DF_IO3		MFP_CFG(DF_IO3, AF2)
+#define DF_IO4_DF_IO4		MFP_CFG(DF_IO4, AF2)
+#define DF_IO5_DF_IO5		MFP_CFG(DF_IO5, AF2)
+#define DF_IO6_DF_IO6		MFP_CFG(DF_IO6, AF2)
+#define DF_IO7_DF_IO7		MFP_CFG(DF_IO7, AF2)
+#define DF_IO8_DF_IO8		MFP_CFG(DF_IO8, AF2)
+#define DF_IO9_DF_IO9		MFP_CFG(DF_IO9, AF2)
+#define DF_IO10_DF_IO10		MFP_CFG(DF_IO10, AF2)
+#define DF_IO11_DF_IO11		MFP_CFG(DF_IO11, AF2)
+#define DF_IO12_DF_IO12		MFP_CFG(DF_IO12, AF2)
+#define DF_IO13_DF_IO13		MFP_CFG(DF_IO13, AF2)
+#define DF_IO14_DF_IO14		MFP_CFG(DF_IO14, AF2)
+#define DF_IO15_DF_IO15		MFP_CFG(DF_IO15, AF2)
+#define DF_nADV1_ALE_DF_nADV1	MFP_CFG(DF_nADV1_ALE, AF2)
+#define DF_nADV2_ALE_DF_nADV2	MFP_CFG(DF_nADV2_ALE, AF2)
+#define DF_nCS0_DF_nCS0		MFP_CFG(DF_nCS0, AF2)
+#define DF_nCS1_DF_nCS1		MFP_CFG(DF_nCS1, AF2)
+#define DF_nRE_nOE_DF_nOE	MFP_CFG(DF_nRE_nOE, AF2)
+#define DF_nWE_DF_nWE		MFP_CFG(DF_nWE, AF2)
+
+/* DFI - NAND */
+#define DF_CLE_nOE_ND_CLE	MFP_CFG_LPM(DF_CLE_nOE, AF1, PULL_HIGH)
+#define DF_INT_RnB_ND_INT_RnB	MFP_CFG_LPM(DF_INT_RnB, AF1, PULL_LOW)
+#define DF_IO0_ND_IO0		MFP_CFG_LPM(DF_IO0, AF1, PULL_LOW)
+#define DF_IO1_ND_IO1		MFP_CFG_LPM(DF_IO1, AF1, PULL_LOW)
+#define DF_IO2_ND_IO2		MFP_CFG_LPM(DF_IO2, AF1, PULL_LOW)
+#define DF_IO3_ND_IO3		MFP_CFG_LPM(DF_IO3, AF1, PULL_LOW)
+#define DF_IO4_ND_IO4		MFP_CFG_LPM(DF_IO4, AF1, PULL_LOW)
+#define DF_IO5_ND_IO5		MFP_CFG_LPM(DF_IO5, AF1, PULL_LOW)
+#define DF_IO6_ND_IO6		MFP_CFG_LPM(DF_IO6, AF1, PULL_LOW)
+#define DF_IO7_ND_IO7		MFP_CFG_LPM(DF_IO7, AF1, PULL_LOW)
+#define DF_IO8_ND_IO8		MFP_CFG_LPM(DF_IO8, AF1, PULL_LOW)
+#define DF_IO9_ND_IO9		MFP_CFG_LPM(DF_IO9, AF1, PULL_LOW)
+#define DF_IO10_ND_IO10		MFP_CFG_LPM(DF_IO10, AF1, PULL_LOW)
+#define DF_IO11_ND_IO11		MFP_CFG_LPM(DF_IO11, AF1, PULL_LOW)
+#define DF_IO12_ND_IO12		MFP_CFG_LPM(DF_IO12, AF1, PULL_LOW)
+#define DF_IO13_ND_IO13		MFP_CFG_LPM(DF_IO13, AF1, PULL_LOW)
+#define DF_IO14_ND_IO14		MFP_CFG_LPM(DF_IO14, AF1, PULL_LOW)
+#define DF_IO15_ND_IO15		MFP_CFG_LPM(DF_IO15, AF1, PULL_LOW)
+#define DF_nADV1_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV1_ALE, AF1, PULL_HIGH)
+#define DF_nADV2_ALE_ND_ALE	MFP_CFG_LPM(DF_nADV2_ALE, AF1, PULL_HIGH)
+#define	DF_nADV2_ALE_nCS3	MFP_CFG_LPM(DF_nADV2_ALE, AF3, PULL_HIGH)
+#define DF_nCS0_ND_nCS0		MFP_CFG_LPM(DF_nCS0, AF1, PULL_HIGH)
+#define DF_nCS1_ND_nCS1		MFP_CFG_LPM(DF_nCS1, AF1, PULL_HIGH)
+#define DF_nRE_nOE_ND_nRE	MFP_CFG_LPM(DF_nRE_nOE, AF1, PULL_HIGH)
+#define DF_nWE_ND_nWE		MFP_CFG_LPM(DF_nWE, AF1, PULL_HIGH)
+
+/* PWM */
+#define GPIO41_PWM0		MFP_CFG_LPM(GPIO41, AF1, PULL_LOW)
+#define GPIO42_PWM1		MFP_CFG_LPM(GPIO42, AF1, PULL_LOW)
+#define GPIO43_PWM3		MFP_CFG_LPM(GPIO43, AF1, PULL_LOW)
+#define GPIO20_PWM0		MFP_CFG_LPM(GPIO20, AF2, PULL_LOW)
+#define GPIO21_PWM2		MFP_CFG_LPM(GPIO21, AF3, PULL_LOW)
+#define GPIO22_PWM3		MFP_CFG_LPM(GPIO22, AF3, PULL_LOW)
+
+/* CIR */
+#define GPIO46_CIR_OUT		MFP_CFG(GPIO46, AF1)
+#define GPIO77_CIR_OUT		MFP_CFG(GPIO77, AF3)
+
+/* USB P2 */
+#define GPIO0_USB_P2_7		MFP_CFG(GPIO0, AF3)
+#define GPIO15_USB_P2_7		MFP_CFG(GPIO15, AF5)
+#define GPIO16_USB_P2_7		MFP_CFG(GPIO16, AF2)
+#define GPIO48_USB_P2_7		MFP_CFG(GPIO48, AF7)
+#define GPIO49_USB_P2_7		MFP_CFG(GPIO49, AF6)
+#define DF_IO9_USB_P2_7		MFP_CFG(DF_IO9, AF3)
+
+#define GPIO48_USB_P2_8		MFP_CFG(GPIO48, AF2)
+#define GPIO50_USB_P2_7		MFP_CFG_X(GPIO50, AF2, DS02X, FLOAT)
+#define GPIO51_USB_P2_5		MFP_CFG(GPIO51, AF2)
+#define GPIO47_USB_P2_4		MFP_CFG(GPIO47, AF2)
+#define GPIO53_USB_P2_3		MFP_CFG(GPIO53, AF2)
+#define GPIO54_USB_P2_6		MFP_CFG(GPIO54, AF2)
+#define GPIO49_USB_P2_2		MFP_CFG(GPIO49, AF2)
+#define GPIO52_USB_P2_1		MFP_CFG(GPIO52, AF2)
+
+#define GPIO63_USB_P2_8		MFP_CFG(GPIO63, AF3)
+#define GPIO64_USB_P2_7		MFP_CFG(GPIO64, AF3)
+#define GPIO65_USB_P2_6		MFP_CFG(GPIO65, AF3)
+#define GPIO66_USG_P2_5		MFP_CFG(GPIO66, AF3)
+#define GPIO67_USB_P2_4		MFP_CFG(GPIO67, AF3)
+#define GPIO68_USB_P2_3		MFP_CFG(GPIO68, AF3)
+#define GPIO69_USB_P2_2		MFP_CFG(GPIO69, AF3)
+#define GPIO70_USB_P2_1		MFP_CFG(GPIO70, AF3)
+
+/* ULPI */
+#define GPIO31_USB_ULPI_D0	MFP_CFG(GPIO31, AF4)
+#define GPIO30_USB_ULPI_D1	MFP_CFG(GPIO30, AF7)
+#define GPIO33_USB_ULPI_D2	MFP_CFG(GPIO33, AF5)
+#define GPIO34_USB_ULPI_D3	MFP_CFG(GPIO34, AF5)
+#define GPIO35_USB_ULPI_D4	MFP_CFG(GPIO35, AF5)
+#define GPIO36_USB_ULPI_D5	MFP_CFG(GPIO36, AF5)
+#define GPIO41_USB_ULPI_D6	MFP_CFG(GPIO41, AF5)
+#define GPIO42_USB_ULPI_D7	MFP_CFG(GPIO42, AF5)
+#define GPIO37_USB_ULPI_DIR	MFP_CFG(GPIO37, AF4)
+#define GPIO38_USB_ULPI_CLK	MFP_CFG(GPIO38, AF4)
+#define GPIO39_USB_ULPI_STP	MFP_CFG(GPIO39, AF4)
+#define GPIO40_USB_ULPI_NXT	MFP_CFG(GPIO40, AF4)
+
+#define GPIO3_CLK26MOUTDMD	MFP_CFG(GPIO3, AF3)
+#define GPIO40_CLK26MOUTDMD	MFP_CFG(GPIO40, AF7)
+#define GPIO94_CLK26MOUTDMD	MFP_CFG(GPIO94, AF5)
+#define GPIO104_CLK26MOUTDMD	MFP_CFG(GPIO104, AF4)
+#define DF_ADDR1_CLK26MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+#define DF_ADDR3_CLK26MOUTDMD	MFP_CFG(DF_ADDR3, AF3)
+
+#define GPIO14_CLK26MOUT	MFP_CFG(GPIO14, AF5)
+#define GPIO38_CLK26MOUT	MFP_CFG(GPIO38, AF7)
+#define GPIO92_CLK26MOUT	MFP_CFG(GPIO92, AF5)
+#define GPIO105_CLK26MOUT	MFP_CFG(GPIO105, AF4)
+
+#define GPIO2_CLK13MOUTDMD	MFP_CFG(GPIO2, AF3)
+#define GPIO39_CLK13MOUTDMD	MFP_CFG(GPIO39, AF7)
+#define GPIO50_CLK13MOUTDMD	MFP_CFG(GPIO50, AF3)
+#define GPIO93_CLK13MOUTDMD	MFP_CFG(GPIO93, AF5)
+#define GPIO103_CLK13MOUTDMD	MFP_CFG(GPIO103, AF4)
+#define DF_ADDR2_CLK13MOUTDMD	MFP_CFG(DF_ADDR2, AF3)
+
+/* 1 wire */
+#define GPIO95_OW_DQ_IN		MFP_CFG(GPIO95, AF5)
+
+#endif /* __ASM_ARCH_MFP_PXA9xx_H */
diff --git a/arch/arm/mach-pxa/include/mach/mfp.h b/arch/arm/mach-pxa/include/mach/mfp.h
new file mode 100644
index 0000000..4821850
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mfp.h
@@ -0,0 +1,320 @@
+/*
+ * arch/arm/mach-pxa/include/mach/mfp.h
+ *
+ * Multi-Function Pin Definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * 2007-8-21: eric miao <eric.miao@marvell.com>
+ *            initial version
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MFP_H
+#define __ASM_ARCH_MFP_H
+
+#define mfp_to_gpio(m)	((m) % 128)
+
+/* list of all the configurable MFP pins */
+enum {
+	MFP_PIN_INVALID = -1,
+
+	MFP_PIN_GPIO0 = 0,
+	MFP_PIN_GPIO1,
+	MFP_PIN_GPIO2,
+	MFP_PIN_GPIO3,
+	MFP_PIN_GPIO4,
+	MFP_PIN_GPIO5,
+	MFP_PIN_GPIO6,
+	MFP_PIN_GPIO7,
+	MFP_PIN_GPIO8,
+	MFP_PIN_GPIO9,
+	MFP_PIN_GPIO10,
+	MFP_PIN_GPIO11,
+	MFP_PIN_GPIO12,
+	MFP_PIN_GPIO13,
+	MFP_PIN_GPIO14,
+	MFP_PIN_GPIO15,
+	MFP_PIN_GPIO16,
+	MFP_PIN_GPIO17,
+	MFP_PIN_GPIO18,
+	MFP_PIN_GPIO19,
+	MFP_PIN_GPIO20,
+	MFP_PIN_GPIO21,
+	MFP_PIN_GPIO22,
+	MFP_PIN_GPIO23,
+	MFP_PIN_GPIO24,
+	MFP_PIN_GPIO25,
+	MFP_PIN_GPIO26,
+	MFP_PIN_GPIO27,
+	MFP_PIN_GPIO28,
+	MFP_PIN_GPIO29,
+	MFP_PIN_GPIO30,
+	MFP_PIN_GPIO31,
+	MFP_PIN_GPIO32,
+	MFP_PIN_GPIO33,
+	MFP_PIN_GPIO34,
+	MFP_PIN_GPIO35,
+	MFP_PIN_GPIO36,
+	MFP_PIN_GPIO37,
+	MFP_PIN_GPIO38,
+	MFP_PIN_GPIO39,
+	MFP_PIN_GPIO40,
+	MFP_PIN_GPIO41,
+	MFP_PIN_GPIO42,
+	MFP_PIN_GPIO43,
+	MFP_PIN_GPIO44,
+	MFP_PIN_GPIO45,
+	MFP_PIN_GPIO46,
+	MFP_PIN_GPIO47,
+	MFP_PIN_GPIO48,
+	MFP_PIN_GPIO49,
+	MFP_PIN_GPIO50,
+	MFP_PIN_GPIO51,
+	MFP_PIN_GPIO52,
+	MFP_PIN_GPIO53,
+	MFP_PIN_GPIO54,
+	MFP_PIN_GPIO55,
+	MFP_PIN_GPIO56,
+	MFP_PIN_GPIO57,
+	MFP_PIN_GPIO58,
+	MFP_PIN_GPIO59,
+	MFP_PIN_GPIO60,
+	MFP_PIN_GPIO61,
+	MFP_PIN_GPIO62,
+	MFP_PIN_GPIO63,
+	MFP_PIN_GPIO64,
+	MFP_PIN_GPIO65,
+	MFP_PIN_GPIO66,
+	MFP_PIN_GPIO67,
+	MFP_PIN_GPIO68,
+	MFP_PIN_GPIO69,
+	MFP_PIN_GPIO70,
+	MFP_PIN_GPIO71,
+	MFP_PIN_GPIO72,
+	MFP_PIN_GPIO73,
+	MFP_PIN_GPIO74,
+	MFP_PIN_GPIO75,
+	MFP_PIN_GPIO76,
+	MFP_PIN_GPIO77,
+	MFP_PIN_GPIO78,
+	MFP_PIN_GPIO79,
+	MFP_PIN_GPIO80,
+	MFP_PIN_GPIO81,
+	MFP_PIN_GPIO82,
+	MFP_PIN_GPIO83,
+	MFP_PIN_GPIO84,
+	MFP_PIN_GPIO85,
+	MFP_PIN_GPIO86,
+	MFP_PIN_GPIO87,
+	MFP_PIN_GPIO88,
+	MFP_PIN_GPIO89,
+	MFP_PIN_GPIO90,
+	MFP_PIN_GPIO91,
+	MFP_PIN_GPIO92,
+	MFP_PIN_GPIO93,
+	MFP_PIN_GPIO94,
+	MFP_PIN_GPIO95,
+	MFP_PIN_GPIO96,
+	MFP_PIN_GPIO97,
+	MFP_PIN_GPIO98,
+	MFP_PIN_GPIO99,
+	MFP_PIN_GPIO100,
+	MFP_PIN_GPIO101,
+	MFP_PIN_GPIO102,
+	MFP_PIN_GPIO103,
+	MFP_PIN_GPIO104,
+	MFP_PIN_GPIO105,
+	MFP_PIN_GPIO106,
+	MFP_PIN_GPIO107,
+	MFP_PIN_GPIO108,
+	MFP_PIN_GPIO109,
+	MFP_PIN_GPIO110,
+	MFP_PIN_GPIO111,
+	MFP_PIN_GPIO112,
+	MFP_PIN_GPIO113,
+	MFP_PIN_GPIO114,
+	MFP_PIN_GPIO115,
+	MFP_PIN_GPIO116,
+	MFP_PIN_GPIO117,
+	MFP_PIN_GPIO118,
+	MFP_PIN_GPIO119,
+	MFP_PIN_GPIO120,
+	MFP_PIN_GPIO121,
+	MFP_PIN_GPIO122,
+	MFP_PIN_GPIO123,
+	MFP_PIN_GPIO124,
+	MFP_PIN_GPIO125,
+	MFP_PIN_GPIO126,
+	MFP_PIN_GPIO127,
+	MFP_PIN_GPIO0_2,
+	MFP_PIN_GPIO1_2,
+	MFP_PIN_GPIO2_2,
+	MFP_PIN_GPIO3_2,
+	MFP_PIN_GPIO4_2,
+	MFP_PIN_GPIO5_2,
+	MFP_PIN_GPIO6_2,
+	MFP_PIN_GPIO7_2,
+	MFP_PIN_GPIO8_2,
+	MFP_PIN_GPIO9_2,
+	MFP_PIN_GPIO10_2,
+	MFP_PIN_GPIO11_2,
+	MFP_PIN_GPIO12_2,
+	MFP_PIN_GPIO13_2,
+	MFP_PIN_GPIO14_2,
+	MFP_PIN_GPIO15_2,
+	MFP_PIN_GPIO16_2,
+	MFP_PIN_GPIO17_2,
+
+	MFP_PIN_ULPI_STP,
+	MFP_PIN_ULPI_NXT,
+	MFP_PIN_ULPI_DIR,
+
+	MFP_PIN_nXCVREN,
+	MFP_PIN_DF_CLE_nOE,
+	MFP_PIN_DF_nADV1_ALE,
+	MFP_PIN_DF_SCLK_E,
+	MFP_PIN_DF_SCLK_S,
+	MFP_PIN_nBE0,
+	MFP_PIN_nBE1,
+	MFP_PIN_DF_nADV2_ALE,
+	MFP_PIN_DF_INT_RnB,
+	MFP_PIN_DF_nCS0,
+	MFP_PIN_DF_nCS1,
+	MFP_PIN_nLUA,
+	MFP_PIN_nLLA,
+	MFP_PIN_DF_nWE,
+	MFP_PIN_DF_ALE_nWE,
+	MFP_PIN_DF_nRE_nOE,
+	MFP_PIN_DF_ADDR0,
+	MFP_PIN_DF_ADDR1,
+	MFP_PIN_DF_ADDR2,
+	MFP_PIN_DF_ADDR3,
+	MFP_PIN_DF_IO0,
+	MFP_PIN_DF_IO1,
+	MFP_PIN_DF_IO2,
+	MFP_PIN_DF_IO3,
+	MFP_PIN_DF_IO4,
+	MFP_PIN_DF_IO5,
+	MFP_PIN_DF_IO6,
+	MFP_PIN_DF_IO7,
+	MFP_PIN_DF_IO8,
+	MFP_PIN_DF_IO9,
+	MFP_PIN_DF_IO10,
+	MFP_PIN_DF_IO11,
+	MFP_PIN_DF_IO12,
+	MFP_PIN_DF_IO13,
+	MFP_PIN_DF_IO14,
+	MFP_PIN_DF_IO15,
+
+	/* additional pins on PXA930 */
+	MFP_PIN_GSIM_UIO,
+	MFP_PIN_GSIM_UCLK,
+	MFP_PIN_GSIM_UDET,
+	MFP_PIN_GSIM_nURST,
+	MFP_PIN_PMIC_INT,
+	MFP_PIN_RDY,
+
+	MFP_PIN_MAX,
+};
+
+/*
+ * a possible MFP configuration is represented by a 32-bit integer
+ *
+ * bit  0.. 9 - MFP Pin Number (1024 Pins Maximum)
+ * bit 10..12 - Alternate Function Selection
+ * bit 13..15 - Drive Strength
+ * bit 16..18 - Low Power Mode State
+ * bit 19..20 - Low Power Mode Edge Detection
+ * bit 21..22 - Run Mode Pull State
+ *
+ * to facilitate the definition, the following macros are provided
+ *
+ * MFP_CFG_DEFAULT - default MFP configuration value, with
+ * 		  alternate function = 0,
+ * 		  drive strength = fast 3mA (MFP_DS03X)
+ * 		  low power mode = default
+ * 		  edge detection = none
+ *
+ * MFP_CFG	- default MFPR value with alternate function
+ * MFP_CFG_DRV	- default MFPR value with alternate function and
+ * 		  pin drive strength
+ * MFP_CFG_LPM	- default MFPR value with alternate function and
+ * 		  low power mode
+ * MFP_CFG_X	- default MFPR value with alternate function,
+ * 		  pin drive strength and low power mode
+ */
+
+typedef unsigned long mfp_cfg_t;
+
+#define MFP_PIN(x)		((x) & 0x3ff)
+
+#define MFP_AF0			(0x0 << 10)
+#define MFP_AF1			(0x1 << 10)
+#define MFP_AF2			(0x2 << 10)
+#define MFP_AF3			(0x3 << 10)
+#define MFP_AF4			(0x4 << 10)
+#define MFP_AF5			(0x5 << 10)
+#define MFP_AF6			(0x6 << 10)
+#define MFP_AF7			(0x7 << 10)
+#define MFP_AF_MASK		(0x7 << 10)
+#define MFP_AF(x)		(((x) >> 10) & 0x7)
+
+#define MFP_DS01X		(0x0 << 13)
+#define MFP_DS02X		(0x1 << 13)
+#define MFP_DS03X		(0x2 << 13)
+#define MFP_DS04X		(0x3 << 13)
+#define MFP_DS06X		(0x4 << 13)
+#define MFP_DS08X		(0x5 << 13)
+#define MFP_DS10X		(0x6 << 13)
+#define MFP_DS13X		(0x7 << 13)
+#define MFP_DS_MASK		(0x7 << 13)
+#define MFP_DS(x)		(((x) >> 13) & 0x7)
+
+#define MFP_LPM_DEFAULT		(0x0 << 16)
+#define MFP_LPM_DRIVE_LOW	(0x1 << 16)
+#define MFP_LPM_DRIVE_HIGH	(0x2 << 16)
+#define MFP_LPM_PULL_LOW	(0x3 << 16)
+#define MFP_LPM_PULL_HIGH	(0x4 << 16)
+#define MFP_LPM_FLOAT		(0x5 << 16)
+#define MFP_LPM_INPUT		(0x6 << 16)
+#define MFP_LPM_STATE_MASK	(0x7 << 16)
+#define MFP_LPM_STATE(x)	(((x) >> 16) & 0x7)
+
+#define MFP_LPM_EDGE_NONE	(0x0 << 19)
+#define MFP_LPM_EDGE_RISE	(0x1 << 19)
+#define MFP_LPM_EDGE_FALL	(0x2 << 19)
+#define MFP_LPM_EDGE_BOTH	(0x3 << 19)
+#define MFP_LPM_EDGE_MASK	(0x3 << 19)
+#define MFP_LPM_EDGE(x)		(((x) >> 19) & 0x3)
+
+#define MFP_PULL_NONE		(0x0 << 21)
+#define MFP_PULL_LOW		(0x1 << 21)
+#define MFP_PULL_HIGH		(0x2 << 21)
+#define MFP_PULL_BOTH		(0x3 << 21)
+#define MFP_PULL_MASK		(0x3 << 21)
+#define MFP_PULL(x)		(((x) >> 21) & 0x3)
+
+#define MFP_CFG_DEFAULT		(MFP_AF0 | MFP_DS03X | MFP_LPM_DEFAULT |\
+				 MFP_LPM_EDGE_NONE | MFP_PULL_NONE)
+
+#define MFP_CFG(pin, af)		\
+	((MFP_CFG_DEFAULT & ~MFP_AF_MASK) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af))
+
+#define MFP_CFG_DRV(pin, af, drv)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv))
+
+#define MFP_CFG_LPM(pin, af, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_LPM_##lpm))
+
+#define MFP_CFG_X(pin, af, drv, lpm)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DS_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(MFP_PIN_##pin) | MFP_##af | MFP_##drv | MFP_LPM_##lpm))
+
+#endif /* __ASM_ARCH_MFP_H */
diff --git a/arch/arm/mach-pxa/include/mach/mioa701.h b/arch/arm/mach-pxa/include/mach/mioa701.h
new file mode 100644
index 0000000..8483cb5
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mioa701.h
@@ -0,0 +1,67 @@
+#ifndef _MIOA701_H_
+#define _MIOA701_H_
+
+#define MIO_CFG_IN(pin, af)		\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_IN))
+
+#define MIO_CFG_OUT(pin, af, state)	\
+	((MFP_CFG_DEFAULT & ~(MFP_AF_MASK | MFP_DIR_MASK | MFP_LPM_STATE_MASK)) |\
+	 (MFP_PIN(pin) | MFP_##af | MFP_DIR_OUT | MFP_LPM_##state))
+
+/* Global GPIOs */
+#define GPIO9_CHARGE_nEN			9
+#define GPIO18_POWEROFF				18
+#define GPIO87_LCD_POWER			87
+
+/* USB */
+#define GPIO13_USB_DETECT			13
+#define GPIO22_USB_ENABLE			22
+
+/* SDIO bits */
+#define GPIO78_SDIO_RO				78
+#define GPIO15_SDIO_INSERT			15
+#define GPIO91_SDIO_EN				91
+
+/* Bluetooth */
+#define GPIO83_BT_ON				83
+
+/* GPS */
+#define GPIO23_GPS_UNKNOWN1			23
+#define GPIO26_GPS_ON				26
+#define GPIO27_GPS_RESET			27
+#define GPIO106_GPS_UNKNOWN2			106
+#define GPIO107_GPS_UNKNOWN3			107
+
+/* GSM */
+#define GPIO24_GSM_MOD_RESET_CMD		24
+#define GPIO88_GSM_nMOD_ON_CMD			88
+#define GPIO90_GSM_nMOD_OFF_CMD			90
+#define GPIO114_GSM_nMOD_DTE_UART_STATE 	114
+#define GPIO25_GSM_MOD_ON_STATE			25
+#define GPIO113_GSM_EVENT			113
+
+/* SOUND */
+#define GPIO12_HPJACK_INSERT			12
+
+/* LEDS */
+#define GPIO10_LED_nCharging			10
+#define GPIO97_LED_nBlue			97
+#define GPIO98_LED_nOrange			98
+#define GPIO82_LED_nVibra			82
+#define GPIO115_LED_nKeyboard			115
+
+/* Keyboard */
+#define GPIO0_KEY_POWER				0
+#define GPIO93_KEY_VOLUME_UP			93
+#define GPIO94_KEY_VOLUME_DOWN			94
+
+extern struct input_dev *mioa701_evdev;
+extern void mioa701_gpio_lpm_set(unsigned long mfp_pin);
+
+/* Assembler externals mioa701_bootresume.S */
+extern u32 mioa701_bootstrap;
+extern u32 mioa701_jumpaddr;
+extern u32 mioa701_bootstrap_lg;
+
+#endif /* _MIOA701_H */
diff --git a/arch/arm/mach-pxa/include/mach/mmc.h b/arch/arm/mach-pxa/include/mach/mmc.h
new file mode 100644
index 0000000..6d1304c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mmc.h
@@ -0,0 +1,23 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/interrupt.h>
+
+struct device;
+struct mmc_host;
+
+struct pxamci_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	unsigned long detect_delay;		/* delay in jiffies before detecting cards after interrupt */
+	int (*init)(struct device *, irq_handler_t , void *);
+	int (*get_ro)(struct device *);
+	void (*setpower)(struct device *, unsigned int);
+	void (*exit)(struct device *, void *);
+};
+
+extern void pxa_set_mci_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci2_info(struct pxamci_platform_data *info);
+extern void pxa3xx_set_mci3_info(struct pxamci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h
new file mode 100644
index 0000000..4d452fc
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h
@@ -0,0 +1,35 @@
+/*
+ * MTD primitives for XIP support. Architecture specific functions
+ *
+ * Do not include this file directly. It's included from linux/mtd/xip.h
+ * 
+ * Author:	Nicolas Pitre
+ * Created:	Nov 2, 2004
+ * Copyright:	(C) 2004 MontaVista Software, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_PXA_MTD_XIP_H__
+#define __ARCH_PXA_MTD_XIP_H__
+
+#include <mach/pxa-regs.h>
+
+#define xip_irqpending()	(ICIP & ICMR)
+
+/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */
+#define xip_currtime()		(OSCR)
+#define xip_elapsed_since(x)	(signed)((OSCR - (x)) / 4)
+
+/*
+ * xip_cpu_idle() is used when waiting for a delay equal or larger than
+ * the system timer tick period.  This should put the CPU into idle mode
+ * to save power and to be woken up only when some interrupts are pending.
+ * As above, this should not rely upon standard kernel code.
+ */
+
+#define xip_cpu_idle()  asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1))
+
+#endif /* __ARCH_PXA_MTD_XIP_H__ */
diff --git a/arch/arm/mach-pxa/include/mach/ohci.h b/arch/arm/mach-pxa/include/mach/ohci.h
new file mode 100644
index 0000000..95b6e2a
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ohci.h
@@ -0,0 +1,36 @@
+#ifndef ASMARM_ARCH_OHCI_H
+#define ASMARM_ARCH_OHCI_H
+
+struct device;
+
+struct pxaohci_platform_data {
+	int (*init)(struct device *);
+	void (*exit)(struct device *);
+
+	unsigned long flags;
+#define ENABLE_PORT1		(1 << 0)
+#define ENABLE_PORT2		(1 << 1)
+#define ENABLE_PORT3		(1 << 2)
+#define ENABLE_PORT_ALL		(ENABLE_PORT1 | ENABLE_PORT2 | ENABLE_PORT3)
+
+#define POWER_SENSE_LOW		(1 << 3)
+#define POWER_CONTROL_LOW	(1 << 4)
+#define NO_OC_PROTECTION	(1 << 5)
+#define OC_MODE_GLOBAL		(0 << 6)
+#define OC_MODE_PERPORT		(1 << 6)
+
+	int power_on_delay;	/* Power On to Power Good time - in ms
+				 * HCD must wait for this duration before
+				 * accessing a powered on port
+				 */
+	int port_mode;
+#define PMM_NPS_MODE           1
+#define PMM_GLOBAL_MODE        2
+#define PMM_PERPORT_MODE       3
+
+	int power_budget;
+};
+
+extern void pxa_set_ohci_info(struct pxaohci_platform_data *info);
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
new file mode 100644
index 0000000..1e8bccb
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -0,0 +1,106 @@
+/*
+ * GPIOs and interrupts for Palm T|X Handheld Computer
+ *
+ * Based on palmld-gpio.h by Alex Osborne
+ *
+ * Authors:	Marek Vasut <marek.vasut@gmail.com>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMTX_H_
+#define _INCLUDE_PALMTX_H_
+
+/** HERE ARE GPIOs **/
+
+/* GPIOs */
+#define GPIO_NR_PALMTX_GPIO_RESET		1
+
+#define GPIO_NR_PALMTX_POWER_DETECT		12 /* 90 */
+#define GPIO_NR_PALMTX_HOTSYNC_BUTTON_N		10
+#define GPIO_NR_PALMTX_EARPHONE_DETECT		107
+
+/* SD/MMC */
+#define GPIO_NR_PALMTX_SD_DETECT_N		14
+#define GPIO_NR_PALMTX_SD_POWER			114 /* probably */
+#define GPIO_NR_PALMTX_SD_READONLY		115 /* probably */
+
+/* TOUCHSCREEN */
+#define GPIO_NR_PALMTX_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMTX_IR_DISABLE		40
+
+/* USB */
+#define GPIO_NR_PALMTX_USB_DETECT_N		13
+#define GPIO_NR_PALMTX_USB_POWER		95
+#define GPIO_NR_PALMTX_USB_PULLUP		93
+
+/* LCD/BACKLIGHT */
+#define GPIO_NR_PALMTX_BL_POWER			84
+#define GPIO_NR_PALMTX_LCD_POWER		96
+
+/* LCD BORDER */
+#define GPIO_NR_PALMTX_BORDER_SWITCH		98
+#define GPIO_NR_PALMTX_BORDER_SELECT		22
+
+/* BLUETOOTH */
+#define GPIO_NR_PALMTX_BT_POWER			17
+#define GPIO_NR_PALMTX_BT_RESET			83
+
+/* PCMCIA (WiFi) */
+#define GPIO_NR_PALMTX_PCMCIA_POWER1		94
+#define GPIO_NR_PALMTX_PCMCIA_POWER2		108
+#define GPIO_NR_PALMTX_PCMCIA_RESET		79
+#define GPIO_NR_PALMTX_PCMCIA_READY		116
+
+/* NAND Flash ... this GPIO may be incorrect! */
+#define GPIO_NR_PALMTX_NAND_BUFFER_DIR		79
+
+/* INTERRUPTS */
+#define IRQ_GPIO_PALMTX_SD_DETECT_N	IRQ_GPIO(GPIO_NR_PALMTX_SD_DETECT_N)
+#define IRQ_GPIO_PALMTX_WM9712_IRQ	IRQ_GPIO(GPIO_NR_PALMTX_WM9712_IRQ)
+#define IRQ_GPIO_PALMTX_USB_DETECT	IRQ_GPIO(GPIO_NR_PALMTX_USB_DETECT)
+#define IRQ_GPIO_PALMTX_GPIO_RESET	IRQ_GPIO(GPIO_NR_PALMTX_GPIO_RESET)
+
+/** HERE ARE INIT VALUES **/
+
+/* Various addresses  */
+#define PALMTX_PCMCIA_PHYS	0x28000000
+#define PALMTX_PCMCIA_VIRT	0xf0000000
+#define PALMTX_PCMCIA_SIZE	0x100000
+
+#define PALMTX_PHYS_RAM_START	0xa0000000
+#define PALMTX_PHYS_IO_START	0x40000000
+
+#define PALMTX_PHYS_FLASH_START	PXA_CS0_PHYS	/* ChipSelect 0 */
+#define PALMTX_PHYS_NAND_START	PXA_CS1_PHYS	/* ChipSelect 1 */
+
+/* TOUCHSCREEN */
+#define AC97_LINK_FRAME			21
+
+
+/* BATTERY */
+#define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMTX_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMTX_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+#define PALMTX_BAT_MEASURE_DELAY	(HZ * 1)
+
+/* BACKLIGHT */
+#define PALMTX_MAX_INTENSITY		0xFE
+#define PALMTX_DEFAULT_INTENSITY	0x7E
+#define PALMTX_LIMIT_MASK		0x7F
+#define PALMTX_PRESCALER		0x3F
+#define PALMTX_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
new file mode 100644
index 0000000..5032307
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -0,0 +1,80 @@
+/*
+ * GPIOs and interrupts for Palm Zire72 Handheld Computer
+ *
+ * Authors:	Alex Osborne <bobofdoom@gmail.com>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_PALMZ72_H_
+#define _INCLUDE_PALMZ72_H_
+
+/* Power and control */
+#define GPIO_NR_PALMZ72_GPIO_RESET		1
+#define GPIO_NR_PALMZ72_POWER_DETECT		0
+
+/* SD/MMC */
+#define GPIO_NR_PALMZ72_SD_DETECT_N		14
+#define GPIO_NR_PALMZ72_SD_POWER_N		98
+#define GPIO_NR_PALMZ72_SD_RO 115
+
+/* Touchscreen */
+#define GPIO_NR_PALMZ72_WM9712_IRQ		27
+
+/* IRDA -  disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */
+#define GPIO_NR_PALMZ72_IR_DISABLE		49
+
+/* USB */
+#define GPIO_NR_PALMZ72_USB_DETECT_N		15
+#define GPIO_NR_PALMZ72_USB_POWER		95
+#define GPIO_NR_PALMZ72_USB_PULLUP		12
+
+/* LCD/Backlight */
+#define GPIO_NR_PALMZ72_BL_POWER		20
+#define GPIO_NR_PALMZ72_LCD_POWER		96
+
+/* LED */
+#define GPIO_NR_PALMZ72_LED_GREEN		88
+
+/* Bluetooth */
+#define GPIO_NR_PALMZ72_BT_POWER		17
+#define GPIO_NR_PALMZ72_BT_RESET		83
+
+/** Initial values **/
+
+/* Battery */
+#define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
+#define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
+#define PALMZ72_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
+#define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
+#define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
+#define PALMZ72_MAX_LIFE_MINS		360	/* on-life in minutes */
+
+/* Backlight */
+#define PALMZ72_MAX_INTENSITY		0xFE
+#define PALMZ72_DEFAULT_INTENSITY	0x7E
+#define PALMZ72_LIMIT_MASK		0x7F
+#define PALMZ72_PRESCALER		0x3F
+#define PALMZ72_PERIOD_NS		3500
+
+#ifdef CONFIG_PM
+struct palmz72_resume_info {
+	u32 magic0;		/* 0x0 */
+	u32 magic1;		/* 0x4 */
+	u32 resume_addr;	/* 0x8 */
+	u32 pad[11];		/* 0xc..0x37 */
+	u32 arm_control;	/* 0x38 */
+	u32 aux_control;	/* 0x3c */
+	u32 ttb;		/* 0x40 */
+	u32 domain_access;	/* 0x44 */
+	u32 process_id;		/* 0x48 */
+};
+#endif
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/pcm027.h b/arch/arm/mach-pxa/include/mach/pcm027.h
new file mode 100644
index 0000000..4dcd2e8
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm027.h
@@ -0,0 +1,75 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm027.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * Definitions of CPU card resources only
+ */
+
+/* I2C RTC */
+#define PCM027_RTC_IRQ_GPIO	0
+#define PCM027_RTC_IRQ		IRQ_GPIO(PCM027_RTC_IRQ_GPIO)
+#define PCM027_RTC_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define ADR_PCM027_RTC		0x51	/* I2C address */
+
+/* I2C EEPROM */
+#define ADR_PCM027_EEPROM	0x54	/* I2C address */
+
+/* Ethernet chip (SMSC91C111) */
+#define PCM027_ETH_IRQ_GPIO	52
+#define PCM027_ETH_IRQ		IRQ_GPIO(PCM027_ETH_IRQ_GPIO)
+#define PCM027_ETH_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM027_ETH_PHYS		PXA_CS5_PHYS
+#define PCM027_ETH_SIZE		(1*1024*1024)
+
+/* CAN controller SJA1000 (unsupported yet) */
+#define PCM027_CAN_IRQ_GPIO	114
+#define PCM027_CAN_IRQ		IRQ_GPIO(PCM027_CAN_IRQ_GPIO)
+#define PCM027_CAN_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_CAN_PHYS		0x22000000
+#define PCM027_CAN_SIZE		0x100
+
+/* SPI GPIO expander (unsupported yet) */
+#define PCM027_EGPIO_IRQ_GPIO	27
+#define PCM027_EGPIO_IRQ	IRQ_GPIO(PCM027_EGPIO_IRQ_GPIO)
+#define PCM027_EGPIO_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+#define PCM027_EGPIO_CS		24
+/*
+ * TODO: Switch this pin from dedicated usage to GPIO if
+ * more than the MAX7301 device is connected to this SPI bus
+ */
+#define PCM027_EGPIO_CS_MODE	GPIO24_SFRM_MD
+
+/* Flash memory */
+#define PCM027_FLASH_PHYS	0x00000000
+#define PCM027_FLASH_SIZE	0x02000000
+
+/* onboard LEDs connected to GPIO */
+#define PCM027_LED_CPU		90
+#define PCM027_LED_HEARD_BEAT	91
+
+/*
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
+ * TODO: Add your own basebaord init function and call it from
+ * inside pcm027_init(). This example here is for the developmen board.
+ * Refer pcm990-baseboard.c
+ */
+extern void pcm990_baseboard_init(void);
diff --git a/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
new file mode 100644
index 0000000..8a4383b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
@@ -0,0 +1,275 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pcm990_baseboard.h
+ *
+ * (c) 2003 Phytec Messtechnik GmbH <armlinux@phytec.de>
+ * (c) 2007 Juergen Beisert <j.beisert@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <mach/pcm027.h>
+
+/*
+ * definitions relevant only when the PCM-990
+ * development base board is in use
+ */
+
+/* CPLD's interrupt controller is connected to PCM-027 GPIO 9 */
+#define PCM990_CTRL_INT_IRQ_GPIO	9
+#define PCM990_CTRL_INT_IRQ		IRQ_GPIO(PCM990_CTRL_INT_IRQ_GPIO)
+#define PCM990_CTRL_INT_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_CTRL_PHYS		PXA_CS1_PHYS	/* 16-Bit */
+#define PCM990_CTRL_BASE		0xea000000
+#define PCM990_CTRL_SIZE		(1*1024*1024)
+
+#define PCM990_CTRL_PWR_IRQ_GPIO	14
+#define PCM990_CTRL_PWR_IRQ		IRQ_GPIO(PCM990_CTRL_PWR_IRQ_GPIO)
+#define PCM990_CTRL_PWR_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/* visible CPLD (U7) registers */
+#define PCM990_CTRL_REG0	0x0000	/* RESET REGISTER */
+#define PCM990_CTRL_SYSRES	0x0001	/* System RESET REGISTER */
+#define PCM990_CTRL_RESOUT	0x0002	/* RESETOUT Enable REGISTER */
+#define PCM990_CTRL_RESGPIO	0x0004	/* RESETGPIO Enable REGISTER */
+
+#define PCM990_CTRL_REG1	0x0002	/* Power REGISTER */
+#define PCM990_CTRL_5VOFF	0x0001	/* Disable  5V Regulators */
+#define PCM990_CTRL_CANPWR	0x0004	/* Enable CANPWR ADUM */
+#define PCM990_CTRL_PM_5V	0x0008	/* Read 5V OK */
+
+#define PCM990_CTRL_REG2	0x0004	/* LED REGISTER */
+#define PCM990_CTRL_LEDPWR	0x0001	/* POWER LED enable */
+#define PCM990_CTRL_LEDBAS	0x0002	/* BASIS LED enable */
+#define PCM990_CTRL_LEDUSR	0x0004	/* USER LED enable */
+
+#define PCM990_CTRL_REG3	0x0006	/* LCD CTRL REGISTER 3 */
+#define PCM990_CTRL_LCDPWR	0x0001	/* RW LCD Power on */
+#define PCM990_CTRL_LCDON	0x0002	/* RW LCD Latch on */
+#define PCM990_CTRL_LCDPOS1	0x0004	/* RW POS 1 */
+#define PCM990_CTRL_LCDPOS2	0x0008	/* RW POS 2 */
+
+#define PCM990_CTRL_REG4	0x0008	/* MMC1 CTRL REGISTER 4 */
+#define PCM990_CTRL_MMC1PWR	0x0001 /* RW MMC1 Power on */
+
+#define PCM990_CTRL_REG5	0x000A	/* MMC2 CTRL REGISTER 5 */
+#define PCM990_CTRL_MMC2PWR	0x0001	/* RW MMC2 Power on */
+#define PCM990_CTRL_MMC2LED	0x0002	/* RW MMC2 LED */
+#define PCM990_CTRL_MMC2DE	0x0004	/* R MMC2 Card detect */
+#define PCM990_CTRL_MMC2WP	0x0008	/* R MMC2 Card write protect */
+
+#define PCM990_CTRL_REG6	0x000C	/* Interrupt Clear REGISTER */
+#define PCM990_CTRL_INTC0	0x0001	/* Clear Reg BT Detect */
+#define PCM990_CTRL_INTC1	0x0002	/* Clear Reg FR RI */
+#define PCM990_CTRL_INTC2	0x0004	/* Clear Reg MMC1 Detect */
+#define PCM990_CTRL_INTC3	0x0008	/* Clear Reg PM_5V off */
+
+#define PCM990_CTRL_REG7	0x000E	/* Interrupt Enable REGISTER */
+#define PCM990_CTRL_ENAINT0	0x0001	/* Enable Int BT Detect */
+#define PCM990_CTRL_ENAINT1	0x0002	/* Enable Int FR RI */
+#define PCM990_CTRL_ENAINT2	0x0004	/* Enable Int MMC1 Detect */
+#define PCM990_CTRL_ENAINT3	0x0008	/* Enable Int PM_5V off */
+
+#define PCM990_CTRL_REG8	0x0014	/* Uart REGISTER */
+#define PCM990_CTRL_FFSD	0x0001	/* BT Uart Enable */
+#define PCM990_CTRL_BTSD	0x0002	/* FF Uart Enable */
+#define PCM990_CTRL_FFRI	0x0004	/* FF Uart RI detect */
+#define PCM990_CTRL_BTRX	0x0008	/* BT Uart Rx detect */
+
+#define PCM990_CTRL_REG9	0x0010	/* AC97 Flash REGISTER */
+#define PCM990_CTRL_FLWP	0x0001	/* pC Flash Write Protect */
+#define PCM990_CTRL_FLDIS	0x0002	/* pC Flash Disable */
+#define PCM990_CTRL_AC97ENA	0x0004	/* Enable AC97 Expansion */
+
+#define PCM990_CTRL_REG10	0x0012	/* GPS-REGISTER */
+#define PCM990_CTRL_GPSPWR	0x0004	/* GPS-Modul Power on */
+#define PCM990_CTRL_GPSENA	0x0008	/* GPS-Modul Enable */
+
+#define PCM990_CTRL_REG11	0x0014	/* Accu REGISTER */
+#define PCM990_CTRL_ACENA	0x0001	/* Charge Enable */
+#define PCM990_CTRL_ACSEL	0x0002	/* Charge Akku -> DC Enable */
+#define PCM990_CTRL_ACPRES	0x0004	/* DC Present */
+#define PCM990_CTRL_ACALARM	0x0008	/* Error Akku */
+
+#define PCM990_CTRL_P2V(x)	((x) - PCM990_CTRL_PHYS + PCM990_CTRL_BASE)
+#define PCM990_CTRL_V2P(x)	((x) - PCM990_CTRL_BASE + PCM990_CTRL_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __PCM990_CTRL_REG(x) \
+		(*((volatile unsigned char *)PCM990_CTRL_P2V(x)))
+#else
+#  define __PCM990_CTRL_REG(x)	PCM990_CTRL_P2V(x)
+#endif
+
+#define PCM990_INTMSKENA __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_INTSETCLR __PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL0	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG0)
+#define PCM990_CTRL1	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG1)
+#define PCM990_CTRL2	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG2)
+#define PCM990_CTRL3	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3)
+#define PCM990_CTRL4	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG4)
+#define PCM990_CTRL5	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG5)
+#define PCM990_CTRL6	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG6)
+#define PCM990_CTRL7	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG7)
+#define PCM990_CTRL8	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG8)
+#define PCM990_CTRL9	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG9)
+#define PCM990_CTRL10	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG10)
+#define PCM990_CTRL11	__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG11)
+
+
+/*
+ * IDE
+ */
+#define PCM990_IDE_IRQ_GPIO	13
+#define PCM990_IDE_IRQ		IRQ_GPIO(PCM990_IDE_IRQ_GPIO)
+#define PCM990_IDE_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+#define PCM990_IDE_PLD_PHYS	0x20000000	/* 16 bit wide */
+#define PCM990_IDE_PLD_BASE	0xee000000
+#define PCM990_IDE_PLD_SIZE	(1*1024*1024)
+
+/* visible CPLD (U6) registers */
+#define PCM990_IDE_PLD_REG0	0x1000	/* OFFSET IDE REGISTER 0 */
+#define PCM990_IDE_PM5V		0x0004	/* R System VCC_5V */
+#define PCM990_IDE_STBY		0x0008	/* R System StandBy */
+
+#define PCM990_IDE_PLD_REG1	0x1002	/* OFFSET IDE REGISTER 1 */
+#define PCM990_IDE_IDEMODE	0x0001	/* R TrueIDE Mode */
+#define PCM990_IDE_DMAENA	0x0004	/* RW DMA Enable */
+#define PCM990_IDE_DMA1_0	0x0008	/* RW 1=DREQ1 0=DREQ0 */
+
+#define PCM990_IDE_PLD_REG2	0x1004	/* OFFSET IDE REGISTER 2 */
+#define PCM990_IDE_RESENA	0x0001	/* RW IDE Reset Bit enable */
+#define PCM990_IDE_RES		0x0002	/* RW IDE Reset Bit */
+#define PCM990_IDE_RDY		0x0008	/* RDY */
+
+#define PCM990_IDE_PLD_REG3	0x1006	/* OFFSET IDE REGISTER 3 */
+#define PCM990_IDE_IDEOE	0x0001	/* RW Latch on Databus */
+#define PCM990_IDE_IDEON	0x0002	/* RW Latch on Control Address */
+#define PCM990_IDE_IDEIN	0x0004	/* RW Latch on Interrupt usw. */
+
+#define PCM990_IDE_PLD_REG4	0x1008	/* OFFSET IDE REGISTER 4 */
+#define PCM990_IDE_PWRENA	0x0001	/* RW IDE Power enable */
+#define PCM990_IDE_5V		0x0002	/* R IDE Power 5V */
+#define PCM990_IDE_PWG		0x0008	/* R IDE Power is on */
+
+#define PCM990_IDE_PLD_P2V(x) ((x) - PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_BASE)
+#define PCM990_IDE_PLD_V2P(x) ((x) - PCM990_IDE_PLD_BASE + PCM990_IDE_PLD_PHYS)
+
+#ifndef __ASSEMBLY__
+# define  __PCM990_IDE_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_IDE_PLD_P2V(x)))
+#else
+# define  __PCM990_IDE_PLD_REG(x)	PCM990_IDE_PLD_P2V(x)
+#endif
+
+#define PCM990_IDE0 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG0)
+#define PCM990_IDE1 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG1)
+#define PCM990_IDE2 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG2)
+#define PCM990_IDE3 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG3)
+#define PCM990_IDE4 \
+	__PCM990_IDE_PLD_REG(PCM990_IDE_PLD_PHYS + PCM990_IDE_PLD_REG4)
+
+/*
+ * Compact Flash
+ */
+#define PCM990_CF_IRQ_GPIO	11
+#define PCM990_CF_IRQ		IRQ_GPIO(PCM990_CF_IRQ_GPIO)
+#define PCM990_CF_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_CD_GPIO	12
+#define PCM990_CF_CD		IRQ_GPIO(PCM990_CF_CD_GPIO)
+#define PCM990_CF_CD_EDGE	IRQ_TYPE_EDGE_RISING
+
+#define PCM990_CF_PLD_PHYS	0x30000000	/* 16 bit wide */
+#define PCM990_CF_PLD_BASE	0xef000000
+#define PCM990_CF_PLD_SIZE	(1*1024*1024)
+#define PCM990_CF_PLD_P2V(x)	((x) - PCM990_CF_PLD_PHYS + PCM990_CF_PLD_BASE)
+#define PCM990_CF_PLD_V2P(x)	((x) - PCM990_CF_PLD_BASE + PCM990_CF_PLD_PHYS)
+
+/* visible CPLD (U6) registers */
+#define PCM990_CF_PLD_REG0	0x1000	/* OFFSET CF REGISTER 0 */
+#define PCM990_CF_REG0_LED	0x0001	/* RW LED on */
+#define PCM990_CF_REG0_BLK	0x0002	/* RW LED flash when access */
+#define PCM990_CF_REG0_PM5V	0x0004	/* R System VCC_5V enable */
+#define PCM990_CF_REG0_STBY	0x0008	/* R System StandBy */
+
+#define PCM990_CF_PLD_REG1	0x1002	/* OFFSET CF REGISTER 1 */
+#define PCM990_CF_REG1_IDEMODE	0x0001	/* RW CF card run as TrueIDE */
+#define PCM990_CF_REG1_CF0	0x0002	/* RW CF card at ADDR 0x28000000 */
+
+#define PCM990_CF_PLD_REG2	0x1004	/* OFFSET CF REGISTER 2 */
+#define PCM990_CF_REG2_RES	0x0002	/* RW CF RESET BIT */
+#define PCM990_CF_REG2_RDYENA	0x0004	/* RW Enable CF_RDY */
+#define PCM990_CF_REG2_RDY	0x0008	/* R CF_RDY auf PWAIT */
+
+#define PCM990_CF_PLD_REG3	0x1006	/* OFFSET CF REGISTER 3 */
+#define PCM990_CF_REG3_CFOE	0x0001	/* RW Latch on Databus */
+#define PCM990_CF_REG3_CFON	0x0002	/* RW Latch on Control Address */
+#define PCM990_CF_REG3_CFIN	0x0004	/* RW Latch on Interrupt usw. */
+#define PCM990_CF_REG3_CFCD	0x0008	/* RW Latch on CD1/2 VS1/2 usw */
+
+#define PCM990_CF_PLD_REG4	0x1008	/* OFFSET CF REGISTER 4 */
+#define PCM990_CF_REG4_PWRENA	0x0001	/* RW CF Power on (CD1/2 = "00") */
+#define PCM990_CF_REG4_5_3V	0x0002	/* RW 1 = 5V CF_VCC 0 = 3 V CF_VCC */
+#define PCM990_CF_REG4_3B	0x0004	/* RW 3.0V Backup from VCC (5_3V=0) */
+#define PCM990_CF_REG4_PWG	0x0008	/* R CF-Power is on */
+
+#define PCM990_CF_PLD_REG5	0x100A	/* OFFSET CF REGISTER 5 */
+#define PCM990_CF_REG5_BVD1	0x0001	/* R CF /BVD1 */
+#define PCM990_CF_REG5_BVD2	0x0002	/* R CF /BVD2 */
+#define PCM990_CF_REG5_VS1	0x0004	/* R CF /VS1 */
+#define PCM990_CF_REG5_VS2	0x0008	/* R CF /VS2 */
+
+#define PCM990_CF_PLD_REG6	0x100C	/* OFFSET CF REGISTER 6 */
+#define PCM990_CF_REG6_CD1	0x0001	/* R CF Card_Detect1 */
+#define PCM990_CF_REG6_CD2	0x0002	/* R CF Card_Detect2 */
+
+#ifndef __ASSEMBLY__
+#  define  __PCM990_CF_PLD_REG(x) \
+	(*((volatile unsigned char *)PCM990_CF_PLD_P2V(x)))
+#else
+#  define  __PCM990_CF_PLD_REG(x)	PCM990_CF_PLD_P2V(x)
+#endif
+
+#define PCM990_CF0 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG0)
+#define PCM990_CF1 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG1)
+#define PCM990_CF2 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG2)
+#define PCM990_CF3 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG3)
+#define PCM990_CF4 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG4)
+#define PCM990_CF5 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG5)
+#define PCM990_CF6 __PCM990_CF_PLD_REG(PCM990_CF_PLD_PHYS + PCM990_CF_PLD_REG6)
+
+/*
+ * Wolfson AC97 Touch
+ */
+#define PCM990_AC97_IRQ_GPIO	10
+#define PCM990_AC97_IRQ		IRQ_GPIO(PCM990_AC97_IRQ_GPIO)
+#define PCM990_AC97_IRQ_EDGE	IRQ_TYPE_EDGE_RISING
+
+/*
+ * MMC phyCORE
+ */
+#define PCM990_MMC0_IRQ_GPIO	9
+#define PCM990_MMC0_IRQ		IRQ_GPIO(PCM990_MMC0_IRQ_GPIO)
+#define PCM990_MMC0_IRQ_EDGE	IRQ_TYPE_EDGE_FALLING
+
+/*
+ * USB phyCore
+ */
+#define PCM990_USB_OVERCURRENT (88 | GPIO_ALT_FN_1_IN)
+#define PCM990_USB_PWR_EN (89 | GPIO_ALT_FN_2_OUT)
diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h
new file mode 100644
index 0000000..8334246
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pm.h
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/suspend.h>
+
+struct pxa_cpu_pm_fns {
+	int	save_count;
+	void	(*save)(unsigned long *);
+	void	(*restore)(unsigned long *);
+	int	(*valid)(suspend_state_t state);
+	void	(*enter)(suspend_state_t state);
+	int	(*prepare)(void);
+	void	(*finish)(void);
+};
+
+extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
+
+/* sleep.S */
+extern void pxa25x_cpu_suspend(unsigned int);
+extern void pxa27x_cpu_suspend(unsigned int);
+extern void pxa_cpu_resume(void);
+
+extern int pxa_pm_enter(suspend_state_t state);
diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h
new file mode 100644
index 0000000..0b3e6d0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/poodle.h
@@ -0,0 +1,90 @@
+/*
+ * arch/arm/mach-pxa/include/mach/poodle.h
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * Based on:
+ *   arch/arm/mach-sa1100/include/mach/collie.h
+ *
+ * ChangeLog:
+ *   04-06-2001 Lineo Japan, Inc.
+ *   04-16-2001 SHARP Corporation
+ *   Update to 2.6 John Lenz
+ */
+#ifndef __ASM_ARCH_POODLE_H
+#define __ASM_ARCH_POODLE_H  1
+
+/*
+ * GPIOs
+ */
+/* PXA GPIOs */
+#define POODLE_GPIO_ON_KEY		(0)
+#define POODLE_GPIO_AC_IN		(1)
+#define POODLE_GPIO_CO			16
+#define POODLE_GPIO_TP_INT		(5)
+#define POODLE_GPIO_TP_CS		(24)
+#define POODLE_GPIO_WAKEUP		(11)	/* change battery */
+#define POODLE_GPIO_GA_INT		(10)
+#define POODLE_GPIO_IR_ON		(22)
+#define POODLE_GPIO_HP_IN		(4)
+#define POODLE_GPIO_CF_IRQ		(17)
+#define POODLE_GPIO_CF_CD		(14)
+#define POODLE_GPIO_CF_STSCHG		(14)
+#define POODLE_GPIO_SD_PWR		(33)
+#define POODLE_GPIO_SD_PWR1		(3)
+#define POODLE_GPIO_nSD_CLK		(6)
+#define POODLE_GPIO_nSD_WP		(7)
+#define POODLE_GPIO_nSD_INT		(8)
+#define POODLE_GPIO_nSD_DETECT		(9)
+#define POODLE_GPIO_MAIN_BAT_LOW	(13)
+#define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_USB_PULLUP		(20)
+#define POODLE_GPIO_ADC_TEMP_ON		(21)
+#define POODLE_GPIO_BYPASS_ON		(36)
+#define POODLE_GPIO_CHRG_ON		(38)
+#define POODLE_GPIO_CHRG_FULL		(16)
+#define POODLE_GPIO_DISCHARGE_ON        (42) /* Enable battery discharge */
+
+/* PXA GPIOs */
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
+
+/* SCOOP GPIOs */
+#define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
+#define POODLE_SCOOP_CP401	SCOOP_GPCR_PA13
+#define POODLE_SCOOP_VPEN	SCOOP_GPCR_PA18
+#define POODLE_SCOOP_L_PCLK	SCOOP_GPCR_PA20
+#define POODLE_SCOOP_L_LCLK	SCOOP_GPCR_PA21
+#define POODLE_SCOOP_HS_OUT	SCOOP_GPCR_PA22
+
+#define POODLE_SCOOP_IO_DIR	( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT )
+#define POODLE_SCOOP_IO_OUT	( 0 )
+
+#define POODLE_SCOOP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define POODLE_GPIO_CHARGE_ON	(POODLE_SCOOP_GPIO_BASE + 0)
+#define POODLE_GPIO_CP401	(POODLE_SCOOP_GPIO_BASE + 2)
+#define POODLE_GPIO_VPEN	(POODLE_SCOOP_GPIO_BASE + 7)
+#define POODLE_GPIO_L_PCLK	(POODLE_SCOOP_GPIO_BASE + 9)
+#define POODLE_GPIO_L_LCLK	(POODLE_SCOOP_GPIO_BASE + 10)
+#define POODLE_GPIO_HS_OUT	(POODLE_SCOOP_GPIO_BASE + 11)
+
+#define POODLE_LOCOMO_GPIO_AMP_ON      LOCOMO_GPIO(8)
+#define POODLE_LOCOMO_GPIO_MUTE_L      LOCOMO_GPIO(10)
+#define POODLE_LOCOMO_GPIO_MUTE_R      LOCOMO_GPIO(11)
+#define POODLE_LOCOMO_GPIO_232VCC_ON   LOCOMO_GPIO(12)
+#define POODLE_LOCOMO_GPIO_JK_B        LOCOMO_GPIO(13)
+
+extern struct platform_device poodle_locomo_device;
+
+#endif /* __ASM_ARCH_POODLE_H  */
diff --git a/arch/arm/mach-pxa/include/mach/pxa-regs.h b/arch/arm/mach-pxa/include/mach/pxa-regs.h
new file mode 100644
index 0000000..15295d9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa-regs.h
@@ -0,0 +1,768 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa-regs.h
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA_REGS_H
+#define __PXA_REGS_H
+
+
+/*
+ * PXA Chip selects
+ */
+
+#define PXA_CS0_PHYS	0x00000000
+#define PXA_CS1_PHYS	0x04000000
+#define PXA_CS2_PHYS	0x08000000
+#define PXA_CS3_PHYS	0x0C000000
+#define PXA_CS4_PHYS	0x10000000
+#define PXA_CS5_PHYS	0x14000000
+
+
+/*
+ * Personal Computer Memory Card International Association (PCMCIA) sockets
+ */
+
+#define PCMCIAPrtSp	0x04000000	/* PCMCIA Partition Space [byte]   */
+#define PCMCIASp	(4*PCMCIAPrtSp)	/* PCMCIA Space [byte]             */
+#define PCMCIAIOSp	PCMCIAPrtSp	/* PCMCIA I/O Space [byte]         */
+#define PCMCIAAttrSp	PCMCIAPrtSp	/* PCMCIA Attribute Space [byte]   */
+#define PCMCIAMemSp	PCMCIAPrtSp	/* PCMCIA Memory Space [byte]      */
+
+#define PCMCIA0Sp	PCMCIASp	/* PCMCIA 0 Space [byte]           */
+#define PCMCIA0IOSp	PCMCIAIOSp	/* PCMCIA 0 I/O Space [byte]       */
+#define PCMCIA0AttrSp	PCMCIAAttrSp	/* PCMCIA 0 Attribute Space [byte] */
+#define PCMCIA0MemSp	PCMCIAMemSp	/* PCMCIA 0 Memory Space [byte]    */
+
+#define PCMCIA1Sp	PCMCIASp	/* PCMCIA 1 Space [byte]           */
+#define PCMCIA1IOSp	PCMCIAIOSp	/* PCMCIA 1 I/O Space [byte]       */
+#define PCMCIA1AttrSp	PCMCIAAttrSp	/* PCMCIA 1 Attribute Space [byte] */
+#define PCMCIA1MemSp	PCMCIAMemSp	/* PCMCIA 1 Memory Space [byte]    */
+
+#define _PCMCIA(Nb)	        	/* PCMCIA [0..1]                   */ \
+                	(0x20000000 + (Nb)*PCMCIASp)
+#define _PCMCIAIO(Nb)	_PCMCIA (Nb)	/* PCMCIA I/O [0..1]               */
+#define _PCMCIAAttr(Nb)	        	/* PCMCIA Attribute [0..1]         */ \
+                	(_PCMCIA (Nb) + 2*PCMCIAPrtSp)
+#define _PCMCIAMem(Nb)	        	/* PCMCIA Memory [0..1]            */ \
+                	(_PCMCIA (Nb) + 3*PCMCIAPrtSp)
+
+#define _PCMCIA0	_PCMCIA (0)	/* PCMCIA 0                        */
+#define _PCMCIA0IO	_PCMCIAIO (0)	/* PCMCIA 0 I/O                    */
+#define _PCMCIA0Attr	_PCMCIAAttr (0)	/* PCMCIA 0 Attribute              */
+#define _PCMCIA0Mem	_PCMCIAMem (0)	/* PCMCIA 0 Memory                 */
+
+#define _PCMCIA1	_PCMCIA (1)	/* PCMCIA 1                        */
+#define _PCMCIA1IO	_PCMCIAIO (1)	/* PCMCIA 1 I/O                    */
+#define _PCMCIA1Attr	_PCMCIAAttr (1)	/* PCMCIA 1 Attribute              */
+#define _PCMCIA1Mem	_PCMCIAMem (1)	/* PCMCIA 1 Memory                 */
+
+
+
+/*
+ * DMA Controller
+ */
+#define DCSR(x)		__REG2(0x40000000, (x) << 2)
+
+#define DCSR_RUN	(1 << 31)	/* Run Bit (read / write) */
+#define DCSR_NODESC	(1 << 30)	/* No-Descriptor Fetch (read / write) */
+#define DCSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define DCSR_REQPEND	(1 << 8)	/* Request Pending (read-only) */
+#define DCSR_STOPSTATE	(1 << 3)	/* Stop State (read-only) */
+#define DCSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write) */
+#define DCSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write) */
+#define DCSR_BUSERR	(1 << 0)	/* Bus Error Interrupt (read / write) */
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define DCSR_EORIRQEN	(1 << 28)       /* End of Receive Interrupt Enable (R/W) */
+#define DCSR_EORJMPEN	(1 << 27)       /* Jump to next descriptor on EOR */
+#define DCSR_EORSTOPEN	(1 << 26)       /* STOP on an EOR */
+#define DCSR_SETCMPST	(1 << 25)       /* Set Descriptor Compare Status */
+#define DCSR_CLRCMPST	(1 << 24)       /* Clear Descriptor Compare Status */
+#define DCSR_CMPST	(1 << 10)       /* The Descriptor Compare Status */
+#define DCSR_EORINTR	(1 << 9)        /* The end of Receive */
+#endif
+
+#define DALGN		__REG(0x400000a0)  /* DMA Alignment Register */
+#define DINT		__REG(0x400000f0)  /* DMA Interrupt Register */
+
+#define DRCMR(n)	(*(((n) < 64) ? \
+			&__REG2(0x40000100, ((n) & 0x3f) << 2) : \
+			&__REG2(0x40001100, ((n) & 0x3f) << 2)))
+
+#define DRCMR_MAPVLD	(1 << 7)	/* Map Valid (read / write) */
+#define DRCMR_CHLNUM	0x1f		/* mask for Channel Number (read / write) */
+
+#define DDADR(x)	__REG2(0x40000200, (x) << 4)
+#define DSADR(x)	__REG2(0x40000204, (x) << 4)
+#define DTADR(x)	__REG2(0x40000208, (x) << 4)
+#define DCMD(x)		__REG2(0x4000020c, (x) << 4)
+
+#define DDADR_DESCADDR	0xfffffff0	/* Address of next descriptor (mask) */
+#define DDADR_STOP	(1 << 0)	/* Stop (read / write) */
+
+#define DCMD_INCSRCADDR	(1 << 31)	/* Source Address Increment Setting. */
+#define DCMD_INCTRGADDR	(1 << 30)	/* Target Address Increment Setting. */
+#define DCMD_FLOWSRC	(1 << 29)	/* Flow Control by the source. */
+#define DCMD_FLOWTRG	(1 << 28)	/* Flow Control by the target. */
+#define DCMD_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define DCMD_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define DCMD_ENDIAN	(1 << 18)	/* Device Endian-ness. */
+#define DCMD_BURST8	(1 << 16)	/* 8 byte burst */
+#define DCMD_BURST16	(2 << 16)	/* 16 byte burst */
+#define DCMD_BURST32	(3 << 16)	/* 32 byte burst */
+#define DCMD_WIDTH1	(1 << 14)	/* 1 byte width */
+#define DCMD_WIDTH2	(2 << 14)	/* 2 byte width (HalfWord) */
+#define DCMD_WIDTH4	(3 << 14)	/* 4 byte width (Word) */
+#define DCMD_LENGTH	0x01fff		/* length mask (max = 8K - 1) */
+
+
+/*
+ * UARTs
+ */
+
+/* Full Function UART (FFUART) */
+#define FFUART		FFRBR
+#define FFRBR		__REG(0x40100000)  /* Receive Buffer Register (read only) */
+#define FFTHR		__REG(0x40100000)  /* Transmit Holding Register (write only) */
+#define FFIER		__REG(0x40100004)  /* Interrupt Enable Register (read/write) */
+#define FFIIR		__REG(0x40100008)  /* Interrupt ID Register (read only) */
+#define FFFCR		__REG(0x40100008)  /* FIFO Control Register (write only) */
+#define FFLCR		__REG(0x4010000C)  /* Line Control Register (read/write) */
+#define FFMCR		__REG(0x40100010)  /* Modem Control Register (read/write) */
+#define FFLSR		__REG(0x40100014)  /* Line Status Register (read only) */
+#define FFMSR		__REG(0x40100018)  /* Modem Status Register (read only) */
+#define FFSPR		__REG(0x4010001C)  /* Scratch Pad Register (read/write) */
+#define FFISR		__REG(0x40100020)  /* Infrared Selection Register (read/write) */
+#define FFDLL		__REG(0x40100000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define FFDLH		__REG(0x40100004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Bluetooth UART (BTUART) */
+#define BTUART		BTRBR
+#define BTRBR		__REG(0x40200000)  /* Receive Buffer Register (read only) */
+#define BTTHR		__REG(0x40200000)  /* Transmit Holding Register (write only) */
+#define BTIER		__REG(0x40200004)  /* Interrupt Enable Register (read/write) */
+#define BTIIR		__REG(0x40200008)  /* Interrupt ID Register (read only) */
+#define BTFCR		__REG(0x40200008)  /* FIFO Control Register (write only) */
+#define BTLCR		__REG(0x4020000C)  /* Line Control Register (read/write) */
+#define BTMCR		__REG(0x40200010)  /* Modem Control Register (read/write) */
+#define BTLSR		__REG(0x40200014)  /* Line Status Register (read only) */
+#define BTMSR		__REG(0x40200018)  /* Modem Status Register (read only) */
+#define BTSPR		__REG(0x4020001C)  /* Scratch Pad Register (read/write) */
+#define BTISR		__REG(0x40200020)  /* Infrared Selection Register (read/write) */
+#define BTDLL		__REG(0x40200000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define BTDLH		__REG(0x40200004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Standard UART (STUART) */
+#define STUART		STRBR
+#define STRBR		__REG(0x40700000)  /* Receive Buffer Register (read only) */
+#define STTHR		__REG(0x40700000)  /* Transmit Holding Register (write only) */
+#define STIER		__REG(0x40700004)  /* Interrupt Enable Register (read/write) */
+#define STIIR		__REG(0x40700008)  /* Interrupt ID Register (read only) */
+#define STFCR		__REG(0x40700008)  /* FIFO Control Register (write only) */
+#define STLCR		__REG(0x4070000C)  /* Line Control Register (read/write) */
+#define STMCR		__REG(0x40700010)  /* Modem Control Register (read/write) */
+#define STLSR		__REG(0x40700014)  /* Line Status Register (read only) */
+#define STMSR		__REG(0x40700018)  /* Reserved */
+#define STSPR		__REG(0x4070001C)  /* Scratch Pad Register (read/write) */
+#define STISR		__REG(0x40700020)  /* Infrared Selection Register (read/write) */
+#define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
+#define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
+#define IER_UUE		(1 << 6)	/* UART Unit Enable */
+#define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
+#define IER_RTIOE	(1 << 4)	/* Receiver Time Out Interrupt Enable */
+#define IER_MIE		(1 << 3)	/* Modem Interrupt Enable */
+#define IER_RLSE	(1 << 2)	/* Receiver Line Status Interrupt Enable */
+#define IER_TIE		(1 << 1)	/* Transmit Data request Interrupt Enable */
+#define IER_RAVIE	(1 << 0)	/* Receiver Data Available Interrupt Enable */
+
+#define IIR_FIFOES1	(1 << 7)	/* FIFO Mode Enable Status */
+#define IIR_FIFOES0	(1 << 6)	/* FIFO Mode Enable Status */
+#define IIR_TOD		(1 << 3)	/* Time Out Detected */
+#define IIR_IID2	(1 << 2)	/* Interrupt Source Encoded */
+#define IIR_IID1	(1 << 1)	/* Interrupt Source Encoded */
+#define IIR_IP		(1 << 0)	/* Interrupt Pending (active low) */
+
+#define FCR_ITL2	(1 << 7)	/* Interrupt Trigger Level */
+#define FCR_ITL1	(1 << 6)	/* Interrupt Trigger Level */
+#define FCR_RESETTF	(1 << 2)	/* Reset Transmitter FIFO */
+#define FCR_RESETRF	(1 << 1)	/* Reset Receiver FIFO */
+#define FCR_TRFIFOE	(1 << 0)	/* Transmit and Receive FIFO Enable */
+#define FCR_ITL_1	(0)
+#define FCR_ITL_8	(FCR_ITL1)
+#define FCR_ITL_16	(FCR_ITL2)
+#define FCR_ITL_32	(FCR_ITL2|FCR_ITL1)
+
+#define LCR_DLAB	(1 << 7)	/* Divisor Latch Access Bit */
+#define LCR_SB		(1 << 6)	/* Set Break */
+#define LCR_STKYP	(1 << 5)	/* Sticky Parity */
+#define LCR_EPS		(1 << 4)	/* Even Parity Select */
+#define LCR_PEN		(1 << 3)	/* Parity Enable */
+#define LCR_STB		(1 << 2)	/* Stop Bit */
+#define LCR_WLS1	(1 << 1)	/* Word Length Select */
+#define LCR_WLS0	(1 << 0)	/* Word Length Select */
+
+#define LSR_FIFOE	(1 << 7)	/* FIFO Error Status */
+#define LSR_TEMT	(1 << 6)	/* Transmitter Empty */
+#define LSR_TDRQ	(1 << 5)	/* Transmit Data Request */
+#define LSR_BI		(1 << 4)	/* Break Interrupt */
+#define LSR_FE		(1 << 3)	/* Framing Error */
+#define LSR_PE		(1 << 2)	/* Parity Error */
+#define LSR_OE		(1 << 1)	/* Overrun Error */
+#define LSR_DR		(1 << 0)	/* Data Ready */
+
+#define MCR_LOOP	(1 << 4)
+#define MCR_OUT2	(1 << 3)	/* force MSR_DCD in loopback mode */
+#define MCR_OUT1	(1 << 2)	/* force MSR_RI in loopback mode */
+#define MCR_RTS		(1 << 1)	/* Request to Send */
+#define MCR_DTR		(1 << 0)	/* Data Terminal Ready */
+
+#define MSR_DCD		(1 << 7)	/* Data Carrier Detect */
+#define MSR_RI		(1 << 6)	/* Ring Indicator */
+#define MSR_DSR		(1 << 5)	/* Data Set Ready */
+#define MSR_CTS		(1 << 4)	/* Clear To Send */
+#define MSR_DDCD	(1 << 3)	/* Delta Data Carrier Detect */
+#define MSR_TERI	(1 << 2)	/* Trailing Edge Ring Indicator */
+#define MSR_DDSR	(1 << 1)	/* Delta Data Set Ready */
+#define MSR_DCTS	(1 << 0)	/* Delta Clear To Send */
+
+/*
+ * IrSR (Infrared Selection Register)
+ */
+#define STISR_RXPL      (1 << 4)        /* Receive Data Polarity */
+#define STISR_TXPL      (1 << 3)        /* Transmit Data Polarity */
+#define STISR_XMODE     (1 << 2)        /* Transmit Pulse Width Select */
+#define STISR_RCVEIR    (1 << 1)        /* Receiver SIR Enable */
+#define STISR_XMITIR    (1 << 0)        /* Transmitter SIR Enable */
+
+
+/*
+ * I2C registers - moved into drivers/i2c/busses/i2c-pxa.c
+ */
+
+/*
+ * Serial Audio Controller - moved into sound/soc/pxa/pxa2xx-i2s.c
+ */
+
+/*
+ * AC97 Controller registers
+ */
+
+#define POCR		__REG(0x40500000)  /* PCM Out Control Register */
+#define POCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define POCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define PICR		__REG(0x40500004)  /* PCM In Control Register */
+#define PICR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define PICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MCCR		__REG(0x40500008)  /* Mic In Control Register */
+#define MCCR_FEIE	(1 << 3)	/* FIFO Error Interrupt Enable */
+#define MCCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define GCR		__REG(0x4050000C)  /* Global Control Register */
+#ifdef CONFIG_PXA3xx
+#define GCR_CLKBPB	(1 << 31)	/* Internal clock enable */
+#endif
+#define GCR_nDMAEN	(1 << 24)	/* non DMA Enable */
+#define GCR_CDONE_IE	(1 << 19)	/* Command Done Interrupt Enable */
+#define GCR_SDONE_IE	(1 << 18)	/* Status Done Interrupt Enable */
+#define GCR_SECRDY_IEN	(1 << 9)	/* Secondary Ready Interrupt Enable */
+#define GCR_PRIRDY_IEN	(1 << 8)	/* Primary Ready Interrupt Enable */
+#define GCR_SECRES_IEN	(1 << 5)	/* Secondary Resume Interrupt Enable */
+#define GCR_PRIRES_IEN	(1 << 4)	/* Primary Resume Interrupt Enable */
+#define GCR_ACLINK_OFF	(1 << 3)	/* AC-link Shut Off */
+#define GCR_WARM_RST	(1 << 2)	/* AC97 Warm Reset */
+#define GCR_COLD_RST	(1 << 1)	/* AC'97 Cold Reset (0 = active) */
+#define GCR_GIE		(1 << 0)	/* Codec GPI Interrupt Enable */
+
+#define POSR		__REG(0x40500010)  /* PCM Out Status Register */
+#define POSR_FIFOE	(1 << 4)	/* FIFO error */
+#define POSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define PISR		__REG(0x40500014)  /* PCM In Status Register */
+#define PISR_FIFOE	(1 << 4)	/* FIFO error */
+#define PISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define PISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MCSR		__REG(0x40500018)  /* Mic In Status Register */
+#define MCSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MCSR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MCSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define GSR		__REG(0x4050001C)  /* Global Status Register */
+#define GSR_CDONE	(1 << 19)	/* Command Done */
+#define GSR_SDONE	(1 << 18)	/* Status Done */
+#define GSR_RDCS	(1 << 15)	/* Read Completion Status */
+#define GSR_BIT3SLT12	(1 << 14)	/* Bit 3 of slot 12 */
+#define GSR_BIT2SLT12	(1 << 13)	/* Bit 2 of slot 12 */
+#define GSR_BIT1SLT12	(1 << 12)	/* Bit 1 of slot 12 */
+#define GSR_SECRES	(1 << 11)	/* Secondary Resume Interrupt */
+#define GSR_PRIRES	(1 << 10)	/* Primary Resume Interrupt */
+#define GSR_SCR		(1 << 9)	/* Secondary Codec Ready */
+#define GSR_PCR		(1 << 8)	/*  Primary Codec Ready */
+#define GSR_MCINT	(1 << 7)	/* Mic In Interrupt */
+#define GSR_POINT	(1 << 6)	/* PCM Out Interrupt */
+#define GSR_PIINT	(1 << 5)	/* PCM In Interrupt */
+#define GSR_ACOFFD	(1 << 3)	/* AC-link Shut Off Done */
+#define GSR_MOINT	(1 << 2)	/* Modem Out Interrupt */
+#define GSR_MIINT	(1 << 1)	/* Modem In Interrupt */
+#define GSR_GSCI	(1 << 0)	/* Codec GPI Status Change Interrupt */
+
+#define CAR		__REG(0x40500020)  /* CODEC Access Register */
+#define CAR_CAIP	(1 << 0)	/* Codec Access In Progress */
+
+#define PCDR		__REG(0x40500040)  /* PCM FIFO Data Register */
+#define MCDR		__REG(0x40500060)  /* Mic-in FIFO Data Register */
+
+#define MOCR		__REG(0x40500100)  /* Modem Out Control Register */
+#define MOCR_FEIE	(1 << 3)	/* FIFO Error */
+#define MOCR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MICR		__REG(0x40500108)  /* Modem In Control Register */
+#define MICR_FEIE	(1 << 3)	/* FIFO Error */
+#define MICR_FSRIE	(1 << 1)	/* FIFO Service Request Interrupt Enable */
+
+#define MOSR		__REG(0x40500110)  /* Modem Out Status Register */
+#define MOSR_FIFOE	(1 << 4)	/* FIFO error */
+#define MOSR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MISR		__REG(0x40500118)  /* Modem In Status Register */
+#define MISR_FIFOE	(1 << 4)	/* FIFO error */
+#define MISR_EOC	(1 << 3)	/* DMA End-of-Chain (exclusive clear) */
+#define MISR_FSR	(1 << 2)	/* FIFO Service Request */
+
+#define MODR		__REG(0x40500140)  /* Modem FIFO Data Register */
+
+#define PAC_REG_BASE	__REG(0x40500200)  /* Primary Audio Codec */
+#define SAC_REG_BASE	__REG(0x40500300)  /* Secondary Audio Codec */
+#define PMC_REG_BASE	__REG(0x40500400)  /* Primary Modem Codec */
+#define SMC_REG_BASE	__REG(0x40500500)  /* Secondary Modem Codec */
+
+
+/*
+ * Fast Infrared Communication Port
+ */
+
+#define FICP		__REG(0x40800000)  /* Start of FICP area */
+#define ICCR0		__REG(0x40800000)  /* ICP Control Register 0 */
+#define ICCR1		__REG(0x40800004)  /* ICP Control Register 1 */
+#define ICCR2		__REG(0x40800008)  /* ICP Control Register 2 */
+#define ICDR		__REG(0x4080000c)  /* ICP Data Register */
+#define ICSR0		__REG(0x40800014)  /* ICP Status Register 0 */
+#define ICSR1		__REG(0x40800018)  /* ICP Status Register 1 */
+
+#define ICCR0_AME	(1 << 7)	/* Address match enable */
+#define ICCR0_TIE	(1 << 6)	/* Transmit FIFO interrupt enable */
+#define ICCR0_RIE	(1 << 5)	/* Recieve FIFO interrupt enable */
+#define ICCR0_RXE	(1 << 4)	/* Receive enable */
+#define ICCR0_TXE	(1 << 3)	/* Transmit enable */
+#define ICCR0_TUS	(1 << 2)	/* Transmit FIFO underrun select */
+#define ICCR0_LBM	(1 << 1)	/* Loopback mode */
+#define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
+
+#define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
+#define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
+#define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
+#define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
+#define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
+#define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
+
+#ifdef CONFIG_PXA27x
+#define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
+#endif
+#define ICSR0_FRE	(1 << 5)	/* Framing error */
+#define ICSR0_RFS	(1 << 4)	/* Receive FIFO service request */
+#define ICSR0_TFS	(1 << 3)	/* Transnit FIFO service request */
+#define ICSR0_RAB	(1 << 2)	/* Receiver abort */
+#define ICSR0_TUR	(1 << 1)	/* Trunsmit FIFO underun */
+#define ICSR0_EIF	(1 << 0)	/* End/Error in FIFO */
+
+#define ICSR1_ROR	(1 << 6)	/* Receiver FIFO underrun  */
+#define ICSR1_CRE	(1 << 5)	/* CRC error */
+#define ICSR1_EOF	(1 << 4)	/* End of frame */
+#define ICSR1_TNF	(1 << 3)	/* Transmit FIFO not full */
+#define ICSR1_RNE	(1 << 2)	/* Receive FIFO not empty */
+#define ICSR1_TBY	(1 << 1)	/* Tramsmiter busy flag */
+#define ICSR1_RSY	(1 << 0)	/* Recevier synchronized flag */
+
+
+/*
+ * Real Time Clock
+ */
+
+#define RCNR		__REG(0x40900000)  /* RTC Count Register */
+#define RTAR		__REG(0x40900004)  /* RTC Alarm Register */
+#define RTSR		__REG(0x40900008)  /* RTC Status Register */
+#define RTTR		__REG(0x4090000C)  /* RTC Timer Trim Register */
+#define PIAR		__REG(0x40900038)  /* Periodic Interrupt Alarm Register */
+
+#define RTSR_PICE	(1 << 15)	/* Periodic interrupt count enable */
+#define RTSR_PIALE	(1 << 14)	/* Periodic interrupt Alarm enable */
+#define RTSR_HZE	(1 << 3)	/* HZ interrupt enable */
+#define RTSR_ALE	(1 << 2)	/* RTC alarm interrupt enable */
+#define RTSR_HZ		(1 << 1)	/* HZ rising-edge detected */
+#define RTSR_AL		(1 << 0)	/* RTC alarm detected */
+
+
+/*
+ * OS Timer & Match Registers
+ */
+
+#define OSMR0		__REG(0x40A00000)  /* */
+#define OSMR1		__REG(0x40A00004)  /* */
+#define OSMR2		__REG(0x40A00008)  /* */
+#define OSMR3		__REG(0x40A0000C)  /* */
+#define OSMR4		__REG(0x40A00080)  /* */
+#define OSCR		__REG(0x40A00010)  /* OS Timer Counter Register */
+#define OSCR4		__REG(0x40A00040)  /* OS Timer Counter Register */
+#define OMCR4		__REG(0x40A000C0)  /* */
+#define OSSR		__REG(0x40A00014)  /* OS Timer Status Register */
+#define OWER		__REG(0x40A00018)  /* OS Timer Watchdog Enable Register */
+#define OIER		__REG(0x40A0001C)  /* OS Timer Interrupt Enable Register */
+
+#define OSSR_M3		(1 << 3)	/* Match status channel 3 */
+#define OSSR_M2		(1 << 2)	/* Match status channel 2 */
+#define OSSR_M1		(1 << 1)	/* Match status channel 1 */
+#define OSSR_M0		(1 << 0)	/* Match status channel 0 */
+
+#define OWER_WME	(1 << 0)	/* Watchdog Match Enable */
+
+#define OIER_E3		(1 << 3)	/* Interrupt enable channel 3 */
+#define OIER_E2		(1 << 2)	/* Interrupt enable channel 2 */
+#define OIER_E1		(1 << 1)	/* Interrupt enable channel 1 */
+#define OIER_E0		(1 << 0)	/* Interrupt enable channel 0 */
+
+
+/*
+ * Pulse Width Modulator
+ */
+
+#define PWM_CTRL0	__REG(0x40B00000)  /* PWM 0 Control Register */
+#define PWM_PWDUTY0	__REG(0x40B00004)  /* PWM 0 Duty Cycle Register */
+#define PWM_PERVAL0	__REG(0x40B00008)  /* PWM 0 Period Control Register */
+
+#define PWM_CTRL1	__REG(0x40C00000)  /* PWM 1Control Register */
+#define PWM_PWDUTY1	__REG(0x40C00004)  /* PWM 1 Duty Cycle Register */
+#define PWM_PERVAL1	__REG(0x40C00008)  /* PWM 1 Period Control Register */
+
+
+/*
+ * Interrupt Controller
+ */
+
+#define ICIP		__REG(0x40D00000)  /* Interrupt Controller IRQ Pending Register */
+#define ICMR		__REG(0x40D00004)  /* Interrupt Controller Mask Register */
+#define ICLR		__REG(0x40D00008)  /* Interrupt Controller Level Register */
+#define ICFP		__REG(0x40D0000C)  /* Interrupt Controller FIQ Pending Register */
+#define ICPR		__REG(0x40D00010)  /* Interrupt Controller Pending Register */
+#define ICCR		__REG(0x40D00014)  /* Interrupt Controller Control Register */
+
+#define ICIP2		__REG(0x40D0009C)  /* Interrupt Controller IRQ Pending Register 2 */
+#define ICMR2		__REG(0x40D000A0)  /* Interrupt Controller Mask Register 2 */
+#define ICLR2		__REG(0x40D000A4)  /* Interrupt Controller Level Register 2 */
+#define ICFP2		__REG(0x40D000A8)  /* Interrupt Controller FIQ Pending Register 2 */
+#define ICPR2		__REG(0x40D000AC)  /* Interrupt Controller Pending Register 2 */
+
+/*
+ * General Purpose I/O
+ */
+
+#define GPIO0_BASE	((void __iomem *)io_p2v(0x40E00000))
+#define GPIO1_BASE	((void __iomem *)io_p2v(0x40E00004))
+#define GPIO2_BASE	((void __iomem *)io_p2v(0x40E00008))
+#define GPIO3_BASE	((void __iomem *)io_p2v(0x40E00100))
+
+#define GPLR_OFFSET	0x00
+#define GPDR_OFFSET	0x0C
+#define GPSR_OFFSET	0x18
+#define GPCR_OFFSET	0x24
+#define GRER_OFFSET	0x30
+#define GFER_OFFSET	0x3C
+#define GEDR_OFFSET	0x48
+
+#define GPLR0		__REG(0x40E00000)  /* GPIO Pin-Level Register GPIO<31:0> */
+#define GPLR1		__REG(0x40E00004)  /* GPIO Pin-Level Register GPIO<63:32> */
+#define GPLR2		__REG(0x40E00008)  /* GPIO Pin-Level Register GPIO<80:64> */
+
+#define GPDR0		__REG(0x40E0000C)  /* GPIO Pin Direction Register GPIO<31:0> */
+#define GPDR1		__REG(0x40E00010)  /* GPIO Pin Direction Register GPIO<63:32> */
+#define GPDR2		__REG(0x40E00014)  /* GPIO Pin Direction Register GPIO<80:64> */
+
+#define GPSR0		__REG(0x40E00018)  /* GPIO Pin Output Set Register GPIO<31:0> */
+#define GPSR1		__REG(0x40E0001C)  /* GPIO Pin Output Set Register GPIO<63:32> */
+#define GPSR2		__REG(0x40E00020)  /* GPIO Pin Output Set Register GPIO<80:64> */
+
+#define GPCR0		__REG(0x40E00024)  /* GPIO Pin Output Clear Register GPIO<31:0> */
+#define GPCR1		__REG(0x40E00028)  /* GPIO Pin Output Clear Register GPIO <63:32> */
+#define GPCR2		__REG(0x40E0002C)  /* GPIO Pin Output Clear Register GPIO <80:64> */
+
+#define GRER0		__REG(0x40E00030)  /* GPIO Rising-Edge Detect Register GPIO<31:0> */
+#define GRER1		__REG(0x40E00034)  /* GPIO Rising-Edge Detect Register GPIO<63:32> */
+#define GRER2		__REG(0x40E00038)  /* GPIO Rising-Edge Detect Register GPIO<80:64> */
+
+#define GFER0		__REG(0x40E0003C)  /* GPIO Falling-Edge Detect Register GPIO<31:0> */
+#define GFER1		__REG(0x40E00040)  /* GPIO Falling-Edge Detect Register GPIO<63:32> */
+#define GFER2		__REG(0x40E00044)  /* GPIO Falling-Edge Detect Register GPIO<80:64> */
+
+#define GEDR0		__REG(0x40E00048)  /* GPIO Edge Detect Status Register GPIO<31:0> */
+#define GEDR1		__REG(0x40E0004C)  /* GPIO Edge Detect Status Register GPIO<63:32> */
+#define GEDR2		__REG(0x40E00050)  /* GPIO Edge Detect Status Register GPIO<80:64> */
+
+#define GAFR0_L		__REG(0x40E00054)  /* GPIO Alternate Function Select Register GPIO<15:0> */
+#define GAFR0_U		__REG(0x40E00058)  /* GPIO Alternate Function Select Register GPIO<31:16> */
+#define GAFR1_L		__REG(0x40E0005C)  /* GPIO Alternate Function Select Register GPIO<47:32> */
+#define GAFR1_U		__REG(0x40E00060)  /* GPIO Alternate Function Select Register GPIO<63:48> */
+#define GAFR2_L		__REG(0x40E00064)  /* GPIO Alternate Function Select Register GPIO<79:64> */
+#define GAFR2_U		__REG(0x40E00068)  /* GPIO Alternate Function Select Register GPIO<95-80> */
+#define GAFR3_L		__REG(0x40E0006C)  /* GPIO Alternate Function Select Register GPIO<111:96> */
+#define GAFR3_U		__REG(0x40E00070)  /* GPIO Alternate Function Select Register GPIO<127:112> */
+
+#define GPLR3		__REG(0x40E00100)  /* GPIO Pin-Level Register GPIO<127:96> */
+#define GPDR3		__REG(0x40E0010C)  /* GPIO Pin Direction Register GPIO<127:96> */
+#define GPSR3		__REG(0x40E00118)  /* GPIO Pin Output Set Register GPIO<127:96> */
+#define GPCR3		__REG(0x40E00124)  /* GPIO Pin Output Clear Register GPIO<127:96> */
+#define GRER3		__REG(0x40E00130)  /* GPIO Rising-Edge Detect Register GPIO<127:96> */
+#define GFER3		__REG(0x40E0013C)  /* GPIO Falling-Edge Detect Register GPIO<127:96> */
+#define GEDR3		__REG(0x40E00148)  /* GPIO Edge Detect Status Register GPIO<127:96> */
+
+/* More handy macros.  The argument is a literal GPIO number. */
+
+#define GPIO_bit(x)	(1 << ((x) & 0x1f))
+
+#if defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+
+/* Interrupt Controller */
+
+#define _GPLR(x)	__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define _GPDR(x)	__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define _GPSR(x)	__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define _GPCR(x)	__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define _GRER(x)	__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define _GFER(x)	__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define _GEDR(x)	__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define _GAFR(x)	__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#define GPLR(x) 	(*((((x) & 0x7f) < 96) ? &_GPLR(x) : &GPLR3))
+#define GPDR(x)		(*((((x) & 0x7f) < 96) ? &_GPDR(x) : &GPDR3))
+#define GPSR(x)		(*((((x) & 0x7f) < 96) ? &_GPSR(x) : &GPSR3))
+#define GPCR(x)		(*((((x) & 0x7f) < 96) ? &_GPCR(x) : &GPCR3))
+#define GRER(x)		(*((((x) & 0x7f) < 96) ? &_GRER(x) : &GRER3))
+#define GFER(x)		(*((((x) & 0x7f) < 96) ? &_GFER(x) : &GFER3))
+#define GEDR(x)		(*((((x) & 0x7f) < 96) ? &_GEDR(x) : &GEDR3))
+#define GAFR(x)		(*((((x) & 0x7f) < 96) ? &_GAFR(x) : \
+			 ((((x) & 0x7f) < 112) ? &GAFR3_L : &GAFR3_U)))
+#else
+
+#define GPLR(x)		__REG2(0x40E00000, ((x) & 0x60) >> 3)
+#define GPDR(x)		__REG2(0x40E0000C, ((x) & 0x60) >> 3)
+#define GPSR(x)		__REG2(0x40E00018, ((x) & 0x60) >> 3)
+#define GPCR(x)		__REG2(0x40E00024, ((x) & 0x60) >> 3)
+#define GRER(x)		__REG2(0x40E00030, ((x) & 0x60) >> 3)
+#define GFER(x)		__REG2(0x40E0003C, ((x) & 0x60) >> 3)
+#define GEDR(x)		__REG2(0x40E00048, ((x) & 0x60) >> 3)
+#define GAFR(x)		__REG2(0x40E00054, ((x) & 0x70) >> 2)
+
+#endif
+
+/*
+ * Power Manager - see pxa2xx-regs.h
+ */
+
+/*
+ * SSP Serial Port Registers - see arch/arm/mach-pxa/include/mach/regs-ssp.h
+ */
+
+/*
+ * MultiMediaCard (MMC) controller - see drivers/mmc/host/pxamci.h
+ */
+
+/*
+ * Core Clock - see arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ */
+
+#ifdef CONFIG_PXA27x
+
+/* Camera Interface */
+#define CICR0		__REG(0x50000000)
+#define CICR1		__REG(0x50000004)
+#define CICR2		__REG(0x50000008)
+#define CICR3		__REG(0x5000000C)
+#define CICR4		__REG(0x50000010)
+#define CISR		__REG(0x50000014)
+#define CIFR		__REG(0x50000018)
+#define CITOR		__REG(0x5000001C)
+#define CIBR0		__REG(0x50000028)
+#define CIBR1		__REG(0x50000030)
+#define CIBR2		__REG(0x50000038)
+
+#define CICR0_DMAEN	(1 << 31)	/* DMA request enable */
+#define CICR0_PAR_EN	(1 << 30)	/* Parity enable */
+#define CICR0_SL_CAP_EN	(1 << 29)	/* Capture enable for slave mode */
+#define CICR0_ENB	(1 << 28)	/* Camera interface enable */
+#define CICR0_DIS	(1 << 27)	/* Camera interface disable */
+#define CICR0_SIM	(0x7 << 24)	/* Sensor interface mode mask */
+#define CICR0_TOM	(1 << 9)	/* Time-out mask */
+#define CICR0_RDAVM	(1 << 8)	/* Receive-data-available mask */
+#define CICR0_FEM	(1 << 7)	/* FIFO-empty mask */
+#define CICR0_EOLM	(1 << 6)	/* End-of-line mask */
+#define CICR0_PERRM	(1 << 5)	/* Parity-error mask */
+#define CICR0_QDM	(1 << 4)	/* Quick-disable mask */
+#define CICR0_CDM	(1 << 3)	/* Disable-done mask */
+#define CICR0_SOFM	(1 << 2)	/* Start-of-frame mask */
+#define CICR0_EOFM	(1 << 1)	/* End-of-frame mask */
+#define CICR0_FOM	(1 << 0)	/* FIFO-overrun mask */
+
+#define CICR1_TBIT	(1 << 31)	/* Transparency bit */
+#define CICR1_RGBT_CONV	(0x3 << 29)	/* RGBT conversion mask */
+#define CICR1_PPL	(0x7ff << 15)	/* Pixels per line mask */
+#define CICR1_RGB_CONV	(0x7 << 12)	/* RGB conversion mask */
+#define CICR1_RGB_F	(1 << 11)	/* RGB format */
+#define CICR1_YCBCR_F	(1 << 10)	/* YCbCr format */
+#define CICR1_RGB_BPP	(0x7 << 7)	/* RGB bis per pixel mask */
+#define CICR1_RAW_BPP	(0x3 << 5)	/* Raw bis per pixel mask */
+#define CICR1_COLOR_SP	(0x3 << 3)	/* Color space mask */
+#define CICR1_DW	(0x7 << 0)	/* Data width mask */
+
+#define CICR2_BLW	(0xff << 24)	/* Beginning-of-line pixel clock
+					   wait count mask */
+#define CICR2_ELW	(0xff << 16)	/* End-of-line pixel clock
+					   wait count mask */
+#define CICR2_HSW	(0x3f << 10)	/* Horizontal sync pulse width mask */
+#define CICR2_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR2_FSW	(0x7 << 0)	/* Frame stabilization
+					   wait count mask */
+
+#define CICR3_BFW	(0xff << 24)	/* Beginning-of-frame line clock
+					   wait count mask */
+#define CICR3_EFW	(0xff << 16)	/* End-of-frame line clock
+					   wait count mask */
+#define CICR3_VSW	(0x3f << 10)	/* Vertical sync pulse width mask */
+#define CICR3_BFPW	(0x3f << 3)	/* Beginning-of-frame pixel clock
+					   wait count mask */
+#define CICR3_LPF	(0x7ff << 0)	/* Lines per frame mask */
+
+#define CICR4_MCLK_DLY	(0x3 << 24)	/* MCLK Data Capture Delay mask */
+#define CICR4_PCLK_EN	(1 << 23)	/* Pixel clock enable */
+#define CICR4_PCP	(1 << 22)	/* Pixel clock polarity */
+#define CICR4_HSP	(1 << 21)	/* Horizontal sync polarity */
+#define CICR4_VSP	(1 << 20)	/* Vertical sync polarity */
+#define CICR4_MCLK_EN	(1 << 19)	/* MCLK enable */
+#define CICR4_FR_RATE	(0x7 << 8)	/* Frame rate mask */
+#define CICR4_DIV	(0xff << 0)	/* Clock divisor mask */
+
+#define CISR_FTO	(1 << 15)	/* FIFO time-out */
+#define CISR_RDAV_2	(1 << 14)	/* Channel 2 receive data available */
+#define CISR_RDAV_1	(1 << 13)	/* Channel 1 receive data available */
+#define CISR_RDAV_0	(1 << 12)	/* Channel 0 receive data available */
+#define CISR_FEMPTY_2	(1 << 11)	/* Channel 2 FIFO empty */
+#define CISR_FEMPTY_1	(1 << 10)	/* Channel 1 FIFO empty */
+#define CISR_FEMPTY_0	(1 << 9)	/* Channel 0 FIFO empty */
+#define CISR_EOL	(1 << 8)	/* End of line */
+#define CISR_PAR_ERR	(1 << 7)	/* Parity error */
+#define CISR_CQD	(1 << 6)	/* Camera interface quick disable */
+#define CISR_CDD	(1 << 5)	/* Camera interface disable done */
+#define CISR_SOF	(1 << 4)	/* Start of frame */
+#define CISR_EOF	(1 << 3)	/* End of frame */
+#define CISR_IFO_2	(1 << 2)	/* FIFO overrun for Channel 2 */
+#define CISR_IFO_1	(1 << 1)	/* FIFO overrun for Channel 1 */
+#define CISR_IFO_0	(1 << 0)	/* FIFO overrun for Channel 0 */
+
+#define CIFR_FLVL2	(0x7f << 23)	/* FIFO 2 level mask */
+#define CIFR_FLVL1	(0x7f << 16)	/* FIFO 1 level mask */
+#define CIFR_FLVL0	(0xff << 8)	/* FIFO 0 level mask */
+#define CIFR_THL_0	(0x3 << 4)	/* Threshold Level for Channel 0 FIFO */
+#define CIFR_RESET_F	(1 << 3)	/* Reset input FIFOs */
+#define CIFR_FEN2	(1 << 2)	/* FIFO enable for channel 2 */
+#define CIFR_FEN1	(1 << 1)	/* FIFO enable for channel 1 */
+#define CIFR_FEN0	(1 << 0)	/* FIFO enable for channel 0 */
+
+#define SRAM_SIZE		0x40000 /* 4x64K  */
+
+#define SRAM_MEM_PHYS		0x5C000000
+
+#define IMPMCR		__REG(0x58000000) /* IM Power Management Control Reg */
+#define IMPMSR		__REG(0x58000008) /* IM Power Management Status Reg */
+
+#define IMPMCR_PC3		(0x3 << 22) /* Bank 3 Power Control */
+#define IMPMCR_PC3_RUN_MODE	(0x0 << 22) /*   Run mode */
+#define IMPMCR_PC3_STANDBY_MODE	(0x1 << 22) /*   Standby mode */
+#define IMPMCR_PC3_AUTO_MODE	(0x3 << 22) /*   Automatically controlled */
+
+#define IMPMCR_PC2		(0x3 << 20) /* Bank 2 Power Control */
+#define IMPMCR_PC2_RUN_MODE	(0x0 << 20) /*   Run mode */
+#define IMPMCR_PC2_STANDBY_MODE	(0x1 << 20) /*   Standby mode */
+#define IMPMCR_PC2_AUTO_MODE	(0x3 << 20) /*   Automatically controlled */
+
+#define IMPMCR_PC1		(0x3 << 18) /* Bank 1 Power Control */
+#define IMPMCR_PC1_RUN_MODE	(0x0 << 18) /*   Run mode */
+#define IMPMCR_PC1_STANDBY_MODE	(0x1 << 18) /*   Standby mode */
+#define IMPMCR_PC1_AUTO_MODE	(0x3 << 18) /*   Automatically controlled */
+
+#define IMPMCR_PC0		(0x3 << 16) /* Bank 0 Power Control */
+#define IMPMCR_PC0_RUN_MODE	(0x0 << 16) /*   Run mode */
+#define IMPMCR_PC0_STANDBY_MODE	(0x1 << 16) /*   Standby mode */
+#define IMPMCR_PC0_AUTO_MODE	(0x3 << 16) /*   Automatically controlled */
+
+#define IMPMCR_AW3		(1 << 11) /* Bank 3 Automatic Wake-up enable */
+#define IMPMCR_AW2		(1 << 10) /* Bank 2 Automatic Wake-up enable */
+#define IMPMCR_AW1		(1 << 9)  /* Bank 1 Automatic Wake-up enable */
+#define IMPMCR_AW0		(1 << 8)  /* Bank 0 Automatic Wake-up enable */
+
+#define IMPMCR_DST		(0xFF << 0) /* Delay Standby Time, ms */
+
+#define IMPMSR_PS3		(0x3 << 6) /* Bank 3 Power Status: */
+#define IMPMSR_PS3_RUN_MODE	(0x0 << 6) /*    Run mode */
+#define IMPMSR_PS3_STANDBY_MODE	(0x1 << 6) /*    Standby mode */
+
+#define IMPMSR_PS2		(0x3 << 4) /* Bank 2 Power Status: */
+#define IMPMSR_PS2_RUN_MODE	(0x0 << 4) /*    Run mode */
+#define IMPMSR_PS2_STANDBY_MODE	(0x1 << 4) /*    Standby mode */
+
+#define IMPMSR_PS1		(0x3 << 2) /* Bank 1 Power Status: */
+#define IMPMSR_PS1_RUN_MODE	(0x0 << 2) /*    Run mode */
+#define IMPMSR_PS1_STANDBY_MODE	(0x1 << 2) /*    Standby mode */
+
+#define IMPMSR_PS0		(0x3 << 0) /* Bank 0 Power Status: */
+#define IMPMSR_PS0_RUN_MODE	(0x0 << 0) /*    Run mode */
+#define IMPMSR_PS0_STANDBY_MODE	(0x1 << 0) /*    Standby mode */
+
+#endif
+
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE		0x1
+#define PWRMODE_STANDBY		0x2
+#define PWRMODE_SLEEP		0x3
+#define PWRMODE_DEEPSLEEP	0x7
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa25x-udc.h b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
new file mode 100644
index 0000000..1b80a48
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa25x-udc.h
@@ -0,0 +1,163 @@
+#ifndef _ASM_ARCH_PXA25X_UDC_H
+#define _ASM_ARCH_PXA25X_UDC_H
+
+#ifdef _ASM_ARCH_PXA27X_UDC_H
+#error "You can't include both PXA25x and PXA27x UDC support"
+#endif
+
+#define UDC_RES1	__REG(0x40600004)  /* UDC Undocumented - Reserved1 */
+#define UDC_RES2	__REG(0x40600008)  /* UDC Undocumented - Reserved2 */
+#define UDC_RES3	__REG(0x4060000C)  /* UDC Undocumented - Reserved3 */
+
+#define UDCCR		__REG(0x40600000)  /* UDC Control Register */
+#define UDCCR_UDE	(1 << 0)	/* UDC enable */
+#define UDCCR_UDA	(1 << 1)	/* UDC active */
+#define UDCCR_RSM	(1 << 2)	/* Device resume */
+#define UDCCR_RESIR	(1 << 3)	/* Resume interrupt request */
+#define UDCCR_SUSIR	(1 << 4)	/* Suspend interrupt request */
+#define UDCCR_SRM	(1 << 5)	/* Suspend/resume interrupt mask */
+#define UDCCR_RSTIR	(1 << 6)	/* Reset interrupt request */
+#define UDCCR_REM	(1 << 7)	/* Reset interrupt mask */
+
+#define UDCCS0		__REG(0x40600010)  /* UDC Endpoint 0 Control/Status Register */
+#define UDCCS0_OPR	(1 << 0)	/* OUT packet ready */
+#define UDCCS0_IPR	(1 << 1)	/* IN packet ready */
+#define UDCCS0_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS0_DRWF	(1 << 3)	/* Device remote wakeup feature */
+#define UDCCS0_SST	(1 << 4)	/* Sent stall */
+#define UDCCS0_FST	(1 << 5)	/* Force stall */
+#define UDCCS0_RNE	(1 << 6)	/* Receive FIFO no empty */
+#define UDCCS0_SA	(1 << 7)	/* Setup active */
+
+/* Bulk IN - Endpoint 1,6,11 */
+#define UDCCS1		__REG(0x40600014)  /* UDC Endpoint 1 (IN) Control/Status Register */
+#define UDCCS6		__REG(0x40600028)  /* UDC Endpoint 6 (IN) Control/Status Register */
+#define UDCCS11		__REG(0x4060003C)  /* UDC Endpoint 11 (IN) Control/Status Register */
+
+#define UDCCS_BI_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_BI_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_BI_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_BI_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_BI_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BI_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BI_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Bulk OUT - Endpoint 2,7,12 */
+#define UDCCS2		__REG(0x40600018)  /* UDC Endpoint 2 (OUT) Control/Status Register */
+#define UDCCS7		__REG(0x4060002C)  /* UDC Endpoint 7 (OUT) Control/Status Register */
+#define UDCCS12		__REG(0x40600040)  /* UDC Endpoint 12 (OUT) Control/Status Register */
+
+#define UDCCS_BO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_BO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_BO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_BO_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_BO_FST	(1 << 5)	/* Force stall */
+#define UDCCS_BO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_BO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Isochronous IN - Endpoint 3,8,13 */
+#define UDCCS3		__REG(0x4060001C)  /* UDC Endpoint 3 (IN) Control/Status Register */
+#define UDCCS8		__REG(0x40600030)  /* UDC Endpoint 8 (IN) Control/Status Register */
+#define UDCCS13		__REG(0x40600044)  /* UDC Endpoint 13 (IN) Control/Status Register */
+
+#define UDCCS_II_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_II_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_II_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_II_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_II_TSP	(1 << 7)	/* Transmit short packet */
+
+/* Isochronous OUT - Endpoint 4,9,14 */
+#define UDCCS4		__REG(0x40600020)  /* UDC Endpoint 4 (OUT) Control/Status Register */
+#define UDCCS9		__REG(0x40600034)  /* UDC Endpoint 9 (OUT) Control/Status Register */
+#define UDCCS14		__REG(0x40600048)  /* UDC Endpoint 14 (OUT) Control/Status Register */
+
+#define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
+#define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
+#define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
+#define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
+#define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
+
+/* Interrupt IN - Endpoint 5,10,15 */
+#define UDCCS5		__REG(0x40600024)  /* UDC Endpoint 5 (Interrupt) Control/Status Register */
+#define UDCCS10		__REG(0x40600038)  /* UDC Endpoint 10 (Interrupt) Control/Status Register */
+#define UDCCS15		__REG(0x4060004C)  /* UDC Endpoint 15 (Interrupt) Control/Status Register */
+
+#define UDCCS_INT_TFS	(1 << 0)	/* Transmit FIFO service */
+#define UDCCS_INT_TPC	(1 << 1)	/* Transmit packet complete */
+#define UDCCS_INT_FTF	(1 << 2)	/* Flush Tx FIFO */
+#define UDCCS_INT_TUR	(1 << 3)	/* Transmit FIFO underrun */
+#define UDCCS_INT_SST	(1 << 4)	/* Sent stall */
+#define UDCCS_INT_FST	(1 << 5)	/* Force stall */
+#define UDCCS_INT_TSP	(1 << 7)	/* Transmit short packet */
+
+#define UFNRH		__REG(0x40600060)  /* UDC Frame Number Register High */
+#define UFNRL		__REG(0x40600064)  /* UDC Frame Number Register Low */
+#define UBCR2		__REG(0x40600068)  /* UDC Byte Count Reg 2 */
+#define UBCR4		__REG(0x4060006c)  /* UDC Byte Count Reg 4 */
+#define UBCR7		__REG(0x40600070)  /* UDC Byte Count Reg 7 */
+#define UBCR9		__REG(0x40600074)  /* UDC Byte Count Reg 9 */
+#define UBCR12		__REG(0x40600078)  /* UDC Byte Count Reg 12 */
+#define UBCR14		__REG(0x4060007c)  /* UDC Byte Count Reg 14 */
+#define UDDR0		__REG(0x40600080)  /* UDC Endpoint 0 Data Register */
+#define UDDR1		__REG(0x40600100)  /* UDC Endpoint 1 Data Register */
+#define UDDR2		__REG(0x40600180)  /* UDC Endpoint 2 Data Register */
+#define UDDR3		__REG(0x40600200)  /* UDC Endpoint 3 Data Register */
+#define UDDR4		__REG(0x40600400)  /* UDC Endpoint 4 Data Register */
+#define UDDR5		__REG(0x406000A0)  /* UDC Endpoint 5 Data Register */
+#define UDDR6		__REG(0x40600600)  /* UDC Endpoint 6 Data Register */
+#define UDDR7		__REG(0x40600680)  /* UDC Endpoint 7 Data Register */
+#define UDDR8		__REG(0x40600700)  /* UDC Endpoint 8 Data Register */
+#define UDDR9		__REG(0x40600900)  /* UDC Endpoint 9 Data Register */
+#define UDDR10		__REG(0x406000C0)  /* UDC Endpoint 10 Data Register */
+#define UDDR11		__REG(0x40600B00)  /* UDC Endpoint 11 Data Register */
+#define UDDR12		__REG(0x40600B80)  /* UDC Endpoint 12 Data Register */
+#define UDDR13		__REG(0x40600C00)  /* UDC Endpoint 13 Data Register */
+#define UDDR14		__REG(0x40600E00)  /* UDC Endpoint 14 Data Register */
+#define UDDR15		__REG(0x406000E0)  /* UDC Endpoint 15 Data Register */
+
+#define UICR0		__REG(0x40600050)  /* UDC Interrupt Control Register 0 */
+
+#define UICR0_IM0	(1 << 0)	/* Interrupt mask ep 0 */
+#define UICR0_IM1	(1 << 1)	/* Interrupt mask ep 1 */
+#define UICR0_IM2	(1 << 2)	/* Interrupt mask ep 2 */
+#define UICR0_IM3	(1 << 3)	/* Interrupt mask ep 3 */
+#define UICR0_IM4	(1 << 4)	/* Interrupt mask ep 4 */
+#define UICR0_IM5	(1 << 5)	/* Interrupt mask ep 5 */
+#define UICR0_IM6	(1 << 6)	/* Interrupt mask ep 6 */
+#define UICR0_IM7	(1 << 7)	/* Interrupt mask ep 7 */
+
+#define UICR1		__REG(0x40600054)  /* UDC Interrupt Control Register 1 */
+
+#define UICR1_IM8	(1 << 0)	/* Interrupt mask ep 8 */
+#define UICR1_IM9	(1 << 1)	/* Interrupt mask ep 9 */
+#define UICR1_IM10	(1 << 2)	/* Interrupt mask ep 10 */
+#define UICR1_IM11	(1 << 3)	/* Interrupt mask ep 11 */
+#define UICR1_IM12	(1 << 4)	/* Interrupt mask ep 12 */
+#define UICR1_IM13	(1 << 5)	/* Interrupt mask ep 13 */
+#define UICR1_IM14	(1 << 6)	/* Interrupt mask ep 14 */
+#define UICR1_IM15	(1 << 7)	/* Interrupt mask ep 15 */
+
+#define USIR0		__REG(0x40600058)  /* UDC Status Interrupt Register 0 */
+
+#define USIR0_IR0	(1 << 0)	/* Interrupt request ep 0 */
+#define USIR0_IR1	(1 << 1)	/* Interrupt request ep 1 */
+#define USIR0_IR2	(1 << 2)	/* Interrupt request ep 2 */
+#define USIR0_IR3	(1 << 3)	/* Interrupt request ep 3 */
+#define USIR0_IR4	(1 << 4)	/* Interrupt request ep 4 */
+#define USIR0_IR5	(1 << 5)	/* Interrupt request ep 5 */
+#define USIR0_IR6	(1 << 6)	/* Interrupt request ep 6 */
+#define USIR0_IR7	(1 << 7)	/* Interrupt request ep 7 */
+
+#define USIR1		__REG(0x4060005C)  /* UDC Status Interrupt Register 1 */
+
+#define USIR1_IR8	(1 << 0)	/* Interrupt request ep 8 */
+#define USIR1_IR9	(1 << 1)	/* Interrupt request ep 9 */
+#define USIR1_IR10	(1 << 2)	/* Interrupt request ep 10 */
+#define USIR1_IR11	(1 << 3)	/* Interrupt request ep 11 */
+#define USIR1_IR12	(1 << 4)	/* Interrupt request ep 12 */
+#define USIR1_IR13	(1 << 5)	/* Interrupt request ep 13 */
+#define USIR1_IR14	(1 << 6)	/* Interrupt request ep 14 */
+#define USIR1_IR15	(1 << 7)	/* Interrupt request ep 15 */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
new file mode 100644
index 0000000..ab1443f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h
@@ -0,0 +1,257 @@
+#ifndef _ASM_ARCH_PXA27X_UDC_H
+#define _ASM_ARCH_PXA27X_UDC_H
+
+#ifdef _ASM_ARCH_PXA25X_UDC_H
+#error You cannot include both PXA25x and PXA27x UDC support
+#endif
+
+#define UDCCR           __REG(0x40600000) /* UDC Control Register */
+#define UDCCR_OEN	(1 << 31)	/* On-the-Go Enable */
+#define UDCCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation
+					   Protocol Port Support */
+#define UDCCR_AHNP	(1 << 29)	/* A-device Host Negotiation Protocol
+					   Support */
+#define UDCCR_BHNP	(1 << 28)	/* B-device Host Negotiation Protocol
+					   Enable */
+#define UDCCR_DWRE	(1 << 16)	/* Device Remote Wake-up Enable */
+#define UDCCR_ACN	(0x03 << 11)	/* Active UDC configuration Number */
+#define UDCCR_ACN_S	11
+#define UDCCR_AIN	(0x07 << 8)	/* Active UDC interface Number */
+#define UDCCR_AIN_S	8
+#define UDCCR_AAISN	(0x07 << 5)	/* Active UDC Alternate Interface
+					   Setting Number */
+#define UDCCR_AAISN_S	5
+#define UDCCR_SMAC	(1 << 4)	/* Switch Endpoint Memory to Active
+					   Configuration */
+#define UDCCR_EMCE	(1 << 3)	/* Endpoint Memory Configuration
+					   Error */
+#define UDCCR_UDR	(1 << 2)	/* UDC Resume */
+#define UDCCR_UDA	(1 << 1)	/* UDC Active */
+#define UDCCR_UDE	(1 << 0)	/* UDC Enable */
+
+#define UDCICR0         __REG(0x40600004) /* UDC Interrupt Control Register0 */
+#define UDCICR1         __REG(0x40600008) /* UDC Interrupt Control Register1 */
+#define UDCICR_FIFOERR	(1 << 1)	/* FIFO Error interrupt for EP */
+#define UDCICR_PKTCOMPL (1 << 0)	/* Packet Complete interrupt for EP */
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDCICR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCICR1_IECC	(1 << 31)	/* IntEn - Configuration Change */
+#define UDCICR1_IESOF	(1 << 30)	/* IntEn - Start of Frame */
+#define UDCICR1_IERU	(1 << 29)	/* IntEn - Resume */
+#define UDCICR1_IESU	(1 << 28)	/* IntEn - Suspend */
+#define UDCICR1_IERS	(1 << 27)	/* IntEn - Reset */
+
+#define UDCISR0         __REG(0x4060000C) /* UDC Interrupt Status Register 0 */
+#define UDCISR1         __REG(0x40600010) /* UDC Interrupt Status Register 1 */
+#define UDCISR_INT(n,intr) (((intr) & 0x03) << (((n) & 0x0F) * 2))
+#define UDCISR1_IRCC	(1 << 31)	/* IntReq - Configuration Change */
+#define UDCISR1_IRSOF	(1 << 30)	/* IntReq - Start of Frame */
+#define UDCISR1_IRRU	(1 << 29)	/* IntReq - Resume */
+#define UDCISR1_IRSU	(1 << 28)	/* IntReq - Suspend */
+#define UDCISR1_IRRS	(1 << 27)	/* IntReq - Reset */
+
+#define UDCFNR          __REG(0x40600014) /* UDC Frame Number Register */
+#define UDCOTGICR	__REG(0x40600018) /* UDC On-The-Go interrupt control */
+#define UDCOTGICR_IESF	(1 << 24)	/* OTG SET_FEATURE command recvd */
+#define UDCOTGICR_IEXR	(1 << 17)	/* Extra Transciever Interrupt
+					   Rising Edge Interrupt Enable */
+#define UDCOTGICR_IEXF	(1 << 16)	/* Extra Transciever Interrupt
+					   Falling Edge Interrupt Enable */
+#define UDCOTGICR_IEVV40R (1 << 9)	/* OTG Vbus Valid 4.0V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV40F (1 << 8)	/* OTG Vbus Valid 4.0V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44R (1 << 7)	/* OTG Vbus Valid 4.4V Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEVV44F (1 << 6)	/* OTG Vbus Valid 4.4V Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVR	(1 << 5)	/* OTG Session Valid Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESVF	(1 << 4)	/* OTG Session Valid Falling Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IESDR	(1 << 3)	/* OTG A-Device SRP Detect Rising
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IESDF	(1 << 2)	/* OTG A-Device SRP Detect Falling
+					   Edge Interrupt Enable */
+#define UDCOTGICR_IEIDR	(1 << 1)	/* OTG ID Change Rising Edge
+					   Interrupt Enable */
+#define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
+					   Interrupt Enable */
+
+#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
+#define UP3OCR		  __REG(0x40600024)  /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
+#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
+#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
+#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS(x)		((x & 7) << 24)	/* Single-Ended Output Select */
+
+#define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
+#define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
+#define UDCCSR0_SA	(1 << 7)	/* Setup Active */
+#define UDCCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define UDCCSR0_FST	(1 << 5)	/* Force Stall */
+#define UDCCSR0_SST	(1 << 4)	/* Sent Stall */
+#define UDCCSR0_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define UDCCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define UDCCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define UDCCSRA         __REG(0x40600104) /* UDC Control/Status register - Endpoint A */
+#define UDCCSRB         __REG(0x40600108) /* UDC Control/Status register - Endpoint B */
+#define UDCCSRC         __REG(0x4060010C) /* UDC Control/Status register - Endpoint C */
+#define UDCCSRD         __REG(0x40600110) /* UDC Control/Status register - Endpoint D */
+#define UDCCSRE         __REG(0x40600114) /* UDC Control/Status register - Endpoint E */
+#define UDCCSRF         __REG(0x40600118) /* UDC Control/Status register - Endpoint F */
+#define UDCCSRG         __REG(0x4060011C) /* UDC Control/Status register - Endpoint G */
+#define UDCCSRH         __REG(0x40600120) /* UDC Control/Status register - Endpoint H */
+#define UDCCSRI         __REG(0x40600124) /* UDC Control/Status register - Endpoint I */
+#define UDCCSRJ         __REG(0x40600128) /* UDC Control/Status register - Endpoint J */
+#define UDCCSRK         __REG(0x4060012C) /* UDC Control/Status register - Endpoint K */
+#define UDCCSRL         __REG(0x40600130) /* UDC Control/Status register - Endpoint L */
+#define UDCCSRM         __REG(0x40600134) /* UDC Control/Status register - Endpoint M */
+#define UDCCSRN         __REG(0x40600138) /* UDC Control/Status register - Endpoint N */
+#define UDCCSRP         __REG(0x4060013C) /* UDC Control/Status register - Endpoint P */
+#define UDCCSRQ         __REG(0x40600140) /* UDC Control/Status register - Endpoint Q */
+#define UDCCSRR         __REG(0x40600144) /* UDC Control/Status register - Endpoint R */
+#define UDCCSRS         __REG(0x40600148) /* UDC Control/Status register - Endpoint S */
+#define UDCCSRT         __REG(0x4060014C) /* UDC Control/Status register - Endpoint T */
+#define UDCCSRU         __REG(0x40600150) /* UDC Control/Status register - Endpoint U */
+#define UDCCSRV         __REG(0x40600154) /* UDC Control/Status register - Endpoint V */
+#define UDCCSRW         __REG(0x40600158) /* UDC Control/Status register - Endpoint W */
+#define UDCCSRX         __REG(0x4060015C) /* UDC Control/Status register - Endpoint X */
+
+#define UDCCSR_DPE	(1 << 9)	/* Data Packet Error */
+#define UDCCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define UDCCSR_SP	(1 << 7)	/* Short Packet Control/Status */
+#define UDCCSR_BNE	(1 << 6)	/* Buffer Not Empty (IN endpoints) */
+#define UDCCSR_BNF	(1 << 6)	/* Buffer Not Full (OUT endpoints) */
+#define UDCCSR_FST	(1 << 5)	/* Force STALL */
+#define UDCCSR_SST	(1 << 4)	/* Sent STALL */
+#define UDCCSR_DME	(1 << 3)	/* DMA Enable */
+#define UDCCSR_TRN	(1 << 2)	/* Tx/Rx NAK */
+#define UDCCSR_PC	(1 << 1)	/* Packet Complete */
+#define UDCCSR_FS	(1 << 0)	/* FIFO needs service */
+
+#define UDCBCN(x)	__REG2(0x40600200, (x)<<2)
+#define UDCBCR0         __REG(0x40600200) /* Byte Count Register - EP0 */
+#define UDCBCRA         __REG(0x40600204) /* Byte Count Register - EPA */
+#define UDCBCRB         __REG(0x40600208) /* Byte Count Register - EPB */
+#define UDCBCRC         __REG(0x4060020C) /* Byte Count Register - EPC */
+#define UDCBCRD         __REG(0x40600210) /* Byte Count Register - EPD */
+#define UDCBCRE         __REG(0x40600214) /* Byte Count Register - EPE */
+#define UDCBCRF         __REG(0x40600218) /* Byte Count Register - EPF */
+#define UDCBCRG         __REG(0x4060021C) /* Byte Count Register - EPG */
+#define UDCBCRH         __REG(0x40600220) /* Byte Count Register - EPH */
+#define UDCBCRI         __REG(0x40600224) /* Byte Count Register - EPI */
+#define UDCBCRJ         __REG(0x40600228) /* Byte Count Register - EPJ */
+#define UDCBCRK         __REG(0x4060022C) /* Byte Count Register - EPK */
+#define UDCBCRL         __REG(0x40600230) /* Byte Count Register - EPL */
+#define UDCBCRM         __REG(0x40600234) /* Byte Count Register - EPM */
+#define UDCBCRN         __REG(0x40600238) /* Byte Count Register - EPN */
+#define UDCBCRP         __REG(0x4060023C) /* Byte Count Register - EPP */
+#define UDCBCRQ         __REG(0x40600240) /* Byte Count Register - EPQ */
+#define UDCBCRR         __REG(0x40600244) /* Byte Count Register - EPR */
+#define UDCBCRS         __REG(0x40600248) /* Byte Count Register - EPS */
+#define UDCBCRT         __REG(0x4060024C) /* Byte Count Register - EPT */
+#define UDCBCRU         __REG(0x40600250) /* Byte Count Register - EPU */
+#define UDCBCRV         __REG(0x40600254) /* Byte Count Register - EPV */
+#define UDCBCRW         __REG(0x40600258) /* Byte Count Register - EPW */
+#define UDCBCRX         __REG(0x4060025C) /* Byte Count Register - EPX */
+
+#define UDCDN(x)	__REG2(0x40600300, (x)<<2)
+#define PHYS_UDCDN(x)	(0x40600300 + ((x)<<2))
+#define PUDCDN(x)	(volatile u32 *)(io_p2v(PHYS_UDCDN((x))))
+#define UDCDR0          __REG(0x40600300) /* Data Register - EP0 */
+#define UDCDRA          __REG(0x40600304) /* Data Register - EPA */
+#define UDCDRB          __REG(0x40600308) /* Data Register - EPB */
+#define UDCDRC          __REG(0x4060030C) /* Data Register - EPC */
+#define UDCDRD          __REG(0x40600310) /* Data Register - EPD */
+#define UDCDRE          __REG(0x40600314) /* Data Register - EPE */
+#define UDCDRF          __REG(0x40600318) /* Data Register - EPF */
+#define UDCDRG          __REG(0x4060031C) /* Data Register - EPG */
+#define UDCDRH          __REG(0x40600320) /* Data Register - EPH */
+#define UDCDRI          __REG(0x40600324) /* Data Register - EPI */
+#define UDCDRJ          __REG(0x40600328) /* Data Register - EPJ */
+#define UDCDRK          __REG(0x4060032C) /* Data Register - EPK */
+#define UDCDRL          __REG(0x40600330) /* Data Register - EPL */
+#define UDCDRM          __REG(0x40600334) /* Data Register - EPM */
+#define UDCDRN          __REG(0x40600338) /* Data Register - EPN */
+#define UDCDRP          __REG(0x4060033C) /* Data Register - EPP */
+#define UDCDRQ          __REG(0x40600340) /* Data Register - EPQ */
+#define UDCDRR          __REG(0x40600344) /* Data Register - EPR */
+#define UDCDRS          __REG(0x40600348) /* Data Register - EPS */
+#define UDCDRT          __REG(0x4060034C) /* Data Register - EPT */
+#define UDCDRU          __REG(0x40600350) /* Data Register - EPU */
+#define UDCDRV          __REG(0x40600354) /* Data Register - EPV */
+#define UDCDRW          __REG(0x40600358) /* Data Register - EPW */
+#define UDCDRX          __REG(0x4060035C) /* Data Register - EPX */
+
+#define UDCCN(x)       __REG2(0x40600400, (x)<<2)
+#define UDCCRA          __REG(0x40600404) /* Configuration register EPA */
+#define UDCCRB          __REG(0x40600408) /* Configuration register EPB */
+#define UDCCRC          __REG(0x4060040C) /* Configuration register EPC */
+#define UDCCRD          __REG(0x40600410) /* Configuration register EPD */
+#define UDCCRE          __REG(0x40600414) /* Configuration register EPE */
+#define UDCCRF          __REG(0x40600418) /* Configuration register EPF */
+#define UDCCRG          __REG(0x4060041C) /* Configuration register EPG */
+#define UDCCRH          __REG(0x40600420) /* Configuration register EPH */
+#define UDCCRI          __REG(0x40600424) /* Configuration register EPI */
+#define UDCCRJ          __REG(0x40600428) /* Configuration register EPJ */
+#define UDCCRK          __REG(0x4060042C) /* Configuration register EPK */
+#define UDCCRL          __REG(0x40600430) /* Configuration register EPL */
+#define UDCCRM          __REG(0x40600434) /* Configuration register EPM */
+#define UDCCRN          __REG(0x40600438) /* Configuration register EPN */
+#define UDCCRP          __REG(0x4060043C) /* Configuration register EPP */
+#define UDCCRQ          __REG(0x40600440) /* Configuration register EPQ */
+#define UDCCRR          __REG(0x40600444) /* Configuration register EPR */
+#define UDCCRS          __REG(0x40600448) /* Configuration register EPS */
+#define UDCCRT          __REG(0x4060044C) /* Configuration register EPT */
+#define UDCCRU          __REG(0x40600450) /* Configuration register EPU */
+#define UDCCRV          __REG(0x40600454) /* Configuration register EPV */
+#define UDCCRW          __REG(0x40600458) /* Configuration register EPW */
+#define UDCCRX          __REG(0x4060045C) /* Configuration register EPX */
+
+#define UDCCONR_CN	(0x03 << 25)	/* Configuration Number */
+#define UDCCONR_CN_S	(25)
+#define UDCCONR_IN	(0x07 << 22)	/* Interface Number */
+#define UDCCONR_IN_S	(22)
+#define UDCCONR_AISN	(0x07 << 19)	/* Alternate Interface Number */
+#define UDCCONR_AISN_S	(19)
+#define UDCCONR_EN	(0x0f << 15)	/* Endpoint Number */
+#define UDCCONR_EN_S	(15)
+#define UDCCONR_ET	(0x03 << 13)	/* Endpoint Type: */
+#define UDCCONR_ET_S	(13)
+#define UDCCONR_ET_INT	(0x03 << 13)	/*   Interrupt */
+#define UDCCONR_ET_BULK	(0x02 << 13)	/*   Bulk */
+#define UDCCONR_ET_ISO	(0x01 << 13)	/*   Isochronous */
+#define UDCCONR_ET_NU	(0x00 << 13)	/*   Not used */
+#define UDCCONR_ED	(1 << 12)	/* Endpoint Direction */
+#define UDCCONR_MPS	(0x3ff << 2)	/* Maximum Packet Size */
+#define UDCCONR_MPS_S	(2)
+#define UDCCONR_DE	(1 << 1)	/* Double Buffering Enable */
+#define UDCCONR_EE	(1 << 0)	/* Endpoint Enable */
+
+
+#define UDC_INT_FIFOERROR  (0x2)
+#define UDC_INT_PACKETCMP  (0x1)
+
+#define UDC_FNR_MASK     (0x7ff)
+
+#define UDCCSR_WR_MASK   (UDCCSR_DME|UDCCSR_FST)
+#define UDC_BCR_MASK    (0x3ff)
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
new file mode 100644
index 0000000..d5a48a9
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa27x_keypad.h
@@ -0,0 +1,58 @@
+#ifndef __ASM_ARCH_PXA27x_KEYPAD_H
+#define __ASM_ARCH_PXA27x_KEYPAD_H
+
+#include <linux/input.h>
+
+#define MAX_MATRIX_KEY_ROWS	(8)
+#define MAX_MATRIX_KEY_COLS	(8)
+
+/* pxa3xx keypad platform specific parameters
+ *
+ * NOTE:
+ * 1. direct_key_num indicates the number of keys in the direct keypad
+ *    _plus_ the number of rotary-encoder sensor inputs,  this can be
+ *    left as 0 if only rotary encoders are enabled,  the driver will
+ *    automatically calculate this
+ *
+ * 2. direct_key_map is the key code map for the direct keys, if rotary
+ *    encoder(s) are enabled, direct key 0/1(2/3) will be ignored
+ *
+ * 3. rotary can be either interpreted as a relative input event (e.g.
+ *    REL_WHEEL/REL_HWHEEL) or specific keys (e.g. UP/DOWN/LEFT/RIGHT)
+ *
+ * 4. matrix key and direct key will use the same debounce_interval by
+ *    default, which should be sufficient in most cases
+ */
+struct pxa27x_keypad_platform_data {
+
+	/* code map for the matrix keys */
+	unsigned int	matrix_key_rows;
+	unsigned int	matrix_key_cols;
+	unsigned int	*matrix_key_map;
+	int		matrix_key_map_size;
+
+	/* direct keys */
+	int		direct_key_num;
+	unsigned int	direct_key_map[8];
+
+	/* rotary encoders 0 */
+	int		enable_rotary0;
+	int		rotary0_rel_code;
+	int		rotary0_up_key;
+	int		rotary0_down_key;
+
+	/* rotary encoders 1 */
+	int		enable_rotary1;
+	int		rotary1_rel_code;
+	int		rotary1_up_key;
+	int		rotary1_down_key;
+
+	/* key debounce interval */
+	unsigned int	debounce_interval;
+};
+
+#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
+
+extern void pxa_set_keypad_info(struct pxa27x_keypad_platform_data *info);
+
+#endif /* __ASM_ARCH_PXA27x_KEYPAD_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
new file mode 100644
index 0000000..6ef1dd0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-gpio.h
@@ -0,0 +1,368 @@
+#ifndef __ASM_ARCH_PXA2XX_GPIO_H
+#define __ASM_ARCH_PXA2XX_GPIO_H
+
+#warning Please use mfp-pxa2[57]x.h instead of pxa2xx-gpio.h
+
+/* GPIO alternate function assignments */
+
+#define GPIO1_RST		1	/* reset */
+#define GPIO6_MMCCLK		6	/* MMC Clock */
+#define GPIO7_48MHz		7	/* 48 MHz clock output */
+#define GPIO8_MMCCS0		8	/* MMC Chip Select 0 */
+#define GPIO9_MMCCS1		9	/* MMC Chip Select 1 */
+#define GPIO10_RTCCLK		10	/* real time clock (1 Hz) */
+#define GPIO11_3_6MHz		11	/* 3.6 MHz oscillator out */
+#define GPIO12_32KHz		12	/* 32 kHz out */
+#define GPIO12_CIF_DD_7		12	/* Camera data pin 7 */
+#define GPIO13_MBGNT		13	/* memory controller grant */
+#define GPIO14_MBREQ		14	/* alternate bus master request */
+#define GPIO15_nCS_1		15	/* chip select 1 */
+#define GPIO16_PWM0		16	/* PWM0 output */
+#define GPIO17_PWM1		17	/* PWM1 output */
+#define GPIO17_CIF_DD_6		17	/* Camera data pin 6 */
+#define GPIO18_RDY		18	/* Ext. Bus Ready */
+#define GPIO19_DREQ1		19	/* External DMA Request */
+#define GPIO20_DREQ0		20	/* External DMA Request */
+#define GPIO23_SCLK		23	/* SSP clock */
+#define GPIO23_CIF_MCLK		23	/* Camera Master Clock */
+#define GPIO24_SFRM		24	/* SSP Frame */
+#define GPIO24_CIF_FV		24	/* Camera frame start signal */
+#define GPIO25_STXD		25	/* SSP transmit */
+#define GPIO25_CIF_LV		25	/* Camera line start signal */
+#define GPIO26_SRXD		26	/* SSP receive */
+#define GPIO26_CIF_PCLK		26	/* Camera Pixel Clock */
+#define GPIO27_SEXTCLK		27	/* SSP ext_clk */
+#define GPIO27_CIF_DD_0		27	/* Camera data pin 0 */
+#define GPIO28_BITCLK		28	/* AC97/I2S bit_clk */
+#define GPIO29_SDATA_IN		29	/* AC97 Sdata_in0 / I2S Sdata_in */
+#define GPIO30_SDATA_OUT	30	/* AC97/I2S Sdata_out */
+#define GPIO31_SYNC		31	/* AC97/I2S sync */
+#define GPIO32_SDATA_IN1	32	/* AC97 Sdata_in1 */
+#define GPIO32_SYSCLK		32	/* I2S System Clock */
+#define GPIO32_MMCCLK		32	/* MMC Clock (PXA270) */
+#define GPIO33_nCS_5		33	/* chip select 5 */
+#define GPIO34_FFRXD		34	/* FFUART receive */
+#define GPIO34_MMCCS0		34	/* MMC Chip Select 0 */
+#define GPIO35_FFCTS		35	/* FFUART Clear to send */
+#define GPIO36_FFDCD		36	/* FFUART Data carrier detect */
+#define GPIO37_FFDSR		37	/* FFUART data set ready */
+#define GPIO38_FFRI		38	/* FFUART Ring Indicator */
+#define GPIO39_MMCCS1		39	/* MMC Chip Select 1 */
+#define GPIO39_FFTXD		39	/* FFUART transmit data */
+#define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
+#define GPIO41_FFRTS		41	/* FFUART request to send */
+#define GPIO42_BTRXD		42	/* BTUART receive data */
+#define GPIO42_HWRXD		42	/* HWUART receive data */
+#define GPIO42_CIF_MCLK		42	/* Camera Master Clock */
+#define GPIO43_BTTXD		43	/* BTUART transmit data */
+#define GPIO43_HWTXD		43	/* HWUART transmit data */
+#define GPIO43_CIF_FV		43	/* Camera frame start signal */
+#define GPIO44_BTCTS		44	/* BTUART clear to send */
+#define GPIO44_HWCTS		44	/* HWUART clear to send */
+#define GPIO44_CIF_LV		44	/* Camera line start signal */
+#define GPIO45_BTRTS		45	/* BTUART request to send */
+#define GPIO45_HWRTS		45	/* HWUART request to send */
+#define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
+#define GPIO45_CIF_PCLK		45	/* Camera Pixel Clock */
+#define GPIO46_ICPRXD		46	/* ICP receive data */
+#define GPIO46_STRXD		46	/* STD_UART receive data */
+#define GPIO47_ICPTXD		47	/* ICP transmit data */
+#define GPIO47_STTXD		47	/* STD_UART transmit data */
+#define GPIO47_CIF_DD_0		47	/* Camera data pin 0 */
+#define GPIO48_nPOE		48	/* Output Enable for Card Space */
+#define GPIO48_CIF_DD_5		48	/* Camera data pin 5 */
+#define GPIO49_nPWE		49	/* Write Enable for Card Space */
+#define GPIO50_nPIOR		50	/* I/O Read for Card Space */
+#define GPIO50_CIF_DD_3		50	/* Camera data pin 3 */
+#define GPIO51_nPIOW		51	/* I/O Write for Card Space */
+#define GPIO51_CIF_DD_2		51	/* Camera data pin 2 */
+#define GPIO52_nPCE_1		52	/* Card Enable for Card Space */
+#define GPIO52_CIF_DD_4		52	/* Camera data pin 4 */
+#define GPIO53_nPCE_2		53	/* Card Enable for Card Space */
+#define GPIO53_MMCCLK		53	/* MMC Clock */
+#define GPIO53_CIF_MCLK		53	/* Camera Master Clock */
+#define GPIO54_MMCCLK		54	/* MMC Clock */
+#define GPIO54_pSKTSEL		54	/* Socket Select for Card Space */
+#define GPIO54_nPCE_2		54	/* Card Enable for Card Space (PXA27x) */
+#define GPIO54_CIF_PCLK		54	/* Camera Pixel Clock */
+#define GPIO55_nPREG		55	/* Card Address bit 26 */
+#define GPIO55_CIF_DD_1		55	/* Camera data pin 1 */
+#define GPIO56_nPWAIT		56	/* Wait signal for Card Space */
+#define GPIO57_nIOIS16		57	/* Bus Width select for I/O Card Space */
+#define GPIO58_LDD_0		58	/* LCD data pin 0 */
+#define GPIO59_LDD_1		59	/* LCD data pin 1 */
+#define GPIO60_LDD_2		60	/* LCD data pin 2 */
+#define GPIO61_LDD_3		61	/* LCD data pin 3 */
+#define GPIO62_LDD_4		62	/* LCD data pin 4 */
+#define GPIO63_LDD_5		63	/* LCD data pin 5 */
+#define GPIO64_LDD_6		64	/* LCD data pin 6 */
+#define GPIO65_LDD_7		65	/* LCD data pin 7 */
+#define GPIO66_LDD_8		66	/* LCD data pin 8 */
+#define GPIO66_MBREQ		66	/* alternate bus master req */
+#define GPIO67_LDD_9		67	/* LCD data pin 9 */
+#define GPIO67_MMCCS0		67	/* MMC Chip Select 0 */
+#define GPIO68_LDD_10		68	/* LCD data pin 10 */
+#define GPIO68_MMCCS1		68	/* MMC Chip Select 1 */
+#define GPIO69_LDD_11		69	/* LCD data pin 11 */
+#define GPIO69_MMCCLK		69	/* MMC_CLK */
+#define GPIO70_LDD_12		70	/* LCD data pin 12 */
+#define GPIO70_RTCCLK		70	/* Real Time clock (1 Hz) */
+#define GPIO71_LDD_13		71	/* LCD data pin 13 */
+#define GPIO71_3_6MHz		71	/* 3.6 MHz Oscillator clock */
+#define GPIO72_LDD_14		72	/* LCD data pin 14 */
+#define GPIO72_32kHz		72	/* 32 kHz clock */
+#define GPIO73_LDD_15		73	/* LCD data pin 15 */
+#define GPIO73_MBGNT		73	/* Memory controller grant */
+#define GPIO74_LCD_FCLK		74	/* LCD Frame clock */
+#define GPIO75_LCD_LCLK		75	/* LCD line clock */
+#define GPIO76_LCD_PCLK		76	/* LCD Pixel clock */
+#define GPIO77_LCD_ACBIAS	77	/* LCD AC Bias */
+#define GPIO78_nCS_2		78	/* chip select 2 */
+#define GPIO79_nCS_3		79	/* chip select 3 */
+#define GPIO80_nCS_4		80	/* chip select 4 */
+#define GPIO81_NSCLK		81	/* NSSP clock */
+#define GPIO81_CIF_DD_0		81	/* Camera data pin 0 */
+#define GPIO82_NSFRM		82	/* NSSP Frame */
+#define GPIO82_CIF_DD_5		82	/* Camera data pin 5 */
+#define GPIO83_NSTXD		83	/* NSSP transmit */
+#define GPIO83_CIF_DD_4		83	/* Camera data pin 4 */
+#define GPIO84_NSRXD		84	/* NSSP receive */
+#define GPIO84_CIF_FV		84	/* Camera frame start signal */
+#define GPIO85_nPCE_1		85	/* Card Enable for Card Space (PXA27x) */
+#define GPIO85_CIF_LV		85	/* Camera line start signal */
+#define GPIO90_CIF_DD_4		90	/* Camera data pin 4 */
+#define GPIO91_CIF_DD_5		91	/* Camera data pin 5 */
+#define GPIO92_MMCDAT0		92	/* MMC DAT0 (PXA27x) */
+#define GPIO93_CIF_DD_6		93	/* Camera data pin 6 */
+#define GPIO94_CIF_DD_5		94	/* Camera data pin 5 */
+#define GPIO95_CIF_DD_4		95	/* Camera data pin 4 */
+#define GPIO96_FFRXD		96	/* FFUART recieve */
+#define GPIO98_FFRTS		98	/* FFUART request to send */
+#define GPIO98_CIF_DD_0		98	/* Camera data pin 0 */
+#define GPIO99_FFTXD		99	/* FFUART transmit data */
+#define GPIO100_FFCTS		100	/* FFUART Clear to send */
+#define GPIO102_nPCE_1		102	/* PCMCIA (PXA27x) */
+#define GPIO103_CIF_DD_3	103	/* Camera data pin 3 */
+#define GPIO104_CIF_DD_2	104	/* Camera data pin 2 */
+#define GPIO105_CIF_DD_1	105	/* Camera data pin 1 */
+#define GPIO106_CIF_DD_9	106	/* Camera data pin 9 */
+#define GPIO107_CIF_DD_8	107	/* Camera data pin 8 */
+#define GPIO108_CIF_DD_7	108	/* Camera data pin 7 */
+#define GPIO109_MMCDAT1		109	/* MMC DAT1 (PXA27x) */
+#define GPIO110_MMCDAT2		110	/* MMC DAT2 (PXA27x) */
+#define GPIO110_MMCCS0		110	/* MMC Chip Select 0 (PXA27x) */
+#define GPIO111_MMCDAT3		111	/* MMC DAT3 (PXA27x) */
+#define GPIO111_MMCCS1		111	/* MMC Chip Select 1 (PXA27x) */
+#define GPIO112_MMCCMD		112	/* MMC CMD (PXA27x) */
+#define GPIO113_I2S_SYSCLK	113	/* I2S System Clock (PXA27x) */
+#define GPIO113_AC97_RESET_N	113	/* AC97 NRESET on (PXA27x) */
+#define GPIO114_CIF_DD_1	114	/* Camera data pin 1 */
+#define GPIO115_CIF_DD_3	115	/* Camera data pin 3 */
+#define GPIO116_CIF_DD_2	116	/* Camera data pin 2 */
+
+/* GPIO alternate function mode & direction */
+
+#define GPIO_IN			0x000
+#define GPIO_OUT		0x080
+#define GPIO_ALT_FN_1_IN	0x100
+#define GPIO_ALT_FN_1_OUT	0x180
+#define GPIO_ALT_FN_2_IN	0x200
+#define GPIO_ALT_FN_2_OUT	0x280
+#define GPIO_ALT_FN_3_IN	0x300
+#define GPIO_ALT_FN_3_OUT	0x380
+#define GPIO_MD_MASK_NR		0x07f
+#define GPIO_MD_MASK_DIR	0x080
+#define GPIO_MD_MASK_FN		0x300
+#define GPIO_DFLT_LOW		0x400
+#define GPIO_DFLT_HIGH		0x800
+
+#define GPIO1_RTS_MD		( 1 | GPIO_ALT_FN_1_IN)
+#define GPIO6_MMCCLK_MD		( 6 | GPIO_ALT_FN_1_OUT)
+#define GPIO7_48MHz_MD		( 7 | GPIO_ALT_FN_1_OUT)
+#define GPIO8_MMCCS0_MD		( 8 | GPIO_ALT_FN_1_OUT)
+#define GPIO9_MMCCS1_MD		( 9 | GPIO_ALT_FN_1_OUT)
+#define GPIO10_RTCCLK_MD	(10 | GPIO_ALT_FN_1_OUT)
+#define GPIO11_3_6MHz_MD	(11 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_32KHz_MD		(12 | GPIO_ALT_FN_1_OUT)
+#define GPIO12_CIF_DD_7_MD	(12 | GPIO_ALT_FN_2_IN)
+#define GPIO13_MBGNT_MD		(13 | GPIO_ALT_FN_2_OUT)
+#define GPIO14_MBREQ_MD		(14 | GPIO_ALT_FN_1_IN)
+#define GPIO15_nCS_1_MD		(15 | GPIO_ALT_FN_2_OUT)
+#define GPIO16_PWM0_MD		(16 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_PWM1_MD		(17 | GPIO_ALT_FN_2_OUT)
+#define GPIO17_CIF_DD_6_MD	(17 | GPIO_ALT_FN_2_IN)
+#define GPIO18_RDY_MD		(18 | GPIO_ALT_FN_1_IN)
+#define GPIO19_DREQ1_MD		(19 | GPIO_ALT_FN_1_IN)
+#define GPIO20_DREQ0_MD		(20 | GPIO_ALT_FN_1_IN)
+#define GPIO23_CIF_MCLK_MD	(23 | GPIO_ALT_FN_1_OUT)
+#define GPIO23_SCLK_MD		(23 | GPIO_ALT_FN_2_OUT)
+#define GPIO24_CIF_FV_MD	(24 | GPIO_ALT_FN_1_OUT)
+#define GPIO24_SFRM_MD		(24 | GPIO_ALT_FN_2_OUT)
+#define GPIO25_CIF_LV_MD	(25 | GPIO_ALT_FN_1_OUT)
+#define GPIO25_STXD_MD		(25 | GPIO_ALT_FN_2_OUT)
+#define GPIO26_SRXD_MD		(26 | GPIO_ALT_FN_1_IN)
+#define GPIO26_CIF_PCLK_MD	(26 | GPIO_ALT_FN_2_IN)
+#define GPIO27_SEXTCLK_MD	(27 | GPIO_ALT_FN_1_IN)
+#define GPIO27_CIF_DD_0_MD	(27 | GPIO_ALT_FN_3_IN)
+#define GPIO28_BITCLK_AC97_MD	(28 | GPIO_ALT_FN_1_IN)
+#define GPIO28_BITCLK_IN_I2S_MD	(28 | GPIO_ALT_FN_2_IN)
+#define GPIO28_BITCLK_OUT_I2S_MD	(28 | GPIO_ALT_FN_1_OUT)
+#define GPIO29_SDATA_IN_AC97_MD	(29 | GPIO_ALT_FN_1_IN)
+#define GPIO29_SDATA_IN_I2S_MD	(29 | GPIO_ALT_FN_2_IN)
+#define GPIO30_SDATA_OUT_AC97_MD	(30 | GPIO_ALT_FN_2_OUT)
+#define GPIO30_SDATA_OUT_I2S_MD	(30 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_I2S_MD	(31 | GPIO_ALT_FN_1_OUT)
+#define GPIO31_SYNC_AC97_MD	(31 | GPIO_ALT_FN_2_OUT)
+#define GPIO32_SDATA_IN1_AC97_MD	(32 | GPIO_ALT_FN_1_IN)
+#define GPIO32_SYSCLK_I2S_MD	(32 | GPIO_ALT_FN_1_OUT)
+#define GPIO32_MMCCLK_MD	(32 | GPIO_ALT_FN_2_OUT)
+#define GPIO33_nCS_5_MD		(33 | GPIO_ALT_FN_2_OUT)
+#define GPIO34_FFRXD_MD		(34 | GPIO_ALT_FN_1_IN)
+#define GPIO34_MMCCS0_MD	(34 | GPIO_ALT_FN_2_OUT)
+#define GPIO35_FFCTS_MD		(35 | GPIO_ALT_FN_1_IN)
+#define GPIO35_KP_MKOUT6_MD	(35 | GPIO_ALT_FN_2_OUT)
+#define GPIO36_FFDCD_MD		(36 | GPIO_ALT_FN_1_IN)
+#define GPIO37_FFDSR_MD		(37 | GPIO_ALT_FN_1_IN)
+#define GPIO38_FFRI_MD		(38 | GPIO_ALT_FN_1_IN)
+#define GPIO39_MMCCS1_MD	(39 | GPIO_ALT_FN_1_OUT)
+#define GPIO39_FFTXD_MD		(39 | GPIO_ALT_FN_2_OUT)
+#define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
+#define GPIO41_KP_MKOUT7_MD	(41 | GPIO_ALT_FN_1_OUT)
+#define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
+#define GPIO42_CIF_MCLK_MD	(42 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
+#define GPIO43_CIF_FV_MD	(43 | GPIO_ALT_FN_3_OUT)
+#define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
+#define GPIO44_CIF_LV_MD	(44 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_CIF_PCLK_MD	(45 | GPIO_ALT_FN_3_IN)
+#define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
+#define GPIO45_SYSCLK_AC97_MD	(45 | GPIO_ALT_FN_1_OUT)
+#define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
+#define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
+#define GPIO47_CIF_DD_0_MD	(47 | GPIO_ALT_FN_1_IN)
+#define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
+#define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_CIF_DD_5_MD	(48 | GPIO_ALT_FN_1_IN)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD		(48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
+#define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD		(50 | GPIO_ALT_FN_1_IN)
+#define GPIO50_CIF_DD_3_MD	(50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
+#define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
+#define GPIO51_HWRTS_MD		(51 | GPIO_ALT_FN_1_OUT)
+#define GPIO51_CIF_DD_2_MD	(51 | GPIO_ALT_FN_1_IN)
+#define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
+#define GPIO52_CIF_DD_4_MD	(52 | GPIO_ALT_FN_1_IN)
+#define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO53_MMCCLK_MD	(53 | GPIO_ALT_FN_1_OUT)
+#define GPIO53_CIF_MCLK_MD	(53 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_MMCCLK_MD	(54 | GPIO_ALT_FN_1_OUT)
+#define GPIO54_nPCE_2_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_pSKTSEL_MD	(54 | GPIO_ALT_FN_2_OUT)
+#define GPIO54_CIF_PCLK_MD	(54 | GPIO_ALT_FN_3_IN)
+#define GPIO55_nPREG_MD		(55 | GPIO_ALT_FN_2_OUT)
+#define GPIO55_CIF_DD_1_MD	(55 | GPIO_ALT_FN_1_IN)
+#define GPIO56_nPWAIT_MD	(56 | GPIO_ALT_FN_1_IN)
+#define GPIO57_nIOIS16_MD	(57 | GPIO_ALT_FN_1_IN)
+#define GPIO58_LDD_0_MD		(58 | GPIO_ALT_FN_2_OUT)
+#define GPIO59_LDD_1_MD		(59 | GPIO_ALT_FN_2_OUT)
+#define GPIO60_LDD_2_MD		(60 | GPIO_ALT_FN_2_OUT)
+#define GPIO61_LDD_3_MD		(61 | GPIO_ALT_FN_2_OUT)
+#define GPIO62_LDD_4_MD		(62 | GPIO_ALT_FN_2_OUT)
+#define GPIO63_LDD_5_MD		(63 | GPIO_ALT_FN_2_OUT)
+#define GPIO64_LDD_6_MD		(64 | GPIO_ALT_FN_2_OUT)
+#define GPIO65_LDD_7_MD		(65 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_LDD_8_MD		(66 | GPIO_ALT_FN_2_OUT)
+#define GPIO66_MBREQ_MD		(66 | GPIO_ALT_FN_1_IN)
+#define GPIO67_LDD_9_MD		(67 | GPIO_ALT_FN_2_OUT)
+#define GPIO67_MMCCS0_MD	(67 | GPIO_ALT_FN_1_OUT)
+#define GPIO68_LDD_10_MD	(68 | GPIO_ALT_FN_2_OUT)
+#define GPIO68_MMCCS1_MD	(68 | GPIO_ALT_FN_1_OUT)
+#define GPIO69_LDD_11_MD	(69 | GPIO_ALT_FN_2_OUT)
+#define GPIO69_MMCCLK_MD	(69 | GPIO_ALT_FN_1_OUT)
+#define GPIO70_LDD_12_MD	(70 | GPIO_ALT_FN_2_OUT)
+#define GPIO70_RTCCLK_MD	(70 | GPIO_ALT_FN_1_OUT)
+#define GPIO71_LDD_13_MD	(71 | GPIO_ALT_FN_2_OUT)
+#define GPIO71_3_6MHz_MD	(71 | GPIO_ALT_FN_1_OUT)
+#define GPIO72_LDD_14_MD	(72 | GPIO_ALT_FN_2_OUT)
+#define GPIO72_32kHz_MD		(72 | GPIO_ALT_FN_1_OUT)
+#define GPIO73_LDD_15_MD	(73 | GPIO_ALT_FN_2_OUT)
+#define GPIO73_MBGNT_MD		(73 | GPIO_ALT_FN_1_OUT)
+#define GPIO74_LCD_FCLK_MD	(74 | GPIO_ALT_FN_2_OUT)
+#define GPIO75_LCD_LCLK_MD	(75 | GPIO_ALT_FN_2_OUT)
+#define GPIO76_LCD_PCLK_MD	(76 | GPIO_ALT_FN_2_OUT)
+#define GPIO77_LCD_ACBIAS_MD	(77 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nCS_2_MD		(78 | GPIO_ALT_FN_2_OUT)
+#define GPIO78_nPCE_2_MD	(78 | GPIO_ALT_FN_1_OUT)
+#define GPIO79_nCS_3_MD		(79 | GPIO_ALT_FN_2_OUT)
+#define GPIO79_pSKTSEL_MD	(79 | GPIO_ALT_FN_1_OUT)
+#define GPIO80_nCS_4_MD		(80 | GPIO_ALT_FN_2_OUT)
+#define GPIO81_NSSP_CLK_OUT	(81 | GPIO_ALT_FN_1_OUT)
+#define GPIO81_NSSP_CLK_IN	(81 | GPIO_ALT_FN_1_IN)
+#define GPIO81_CIF_DD_0_MD	(81 | GPIO_ALT_FN_2_IN)
+#define GPIO82_NSSP_FRM_OUT	(82 | GPIO_ALT_FN_1_OUT)
+#define GPIO82_NSSP_FRM_IN	(82 | GPIO_ALT_FN_1_IN)
+#define GPIO82_CIF_DD_5_MD	(82 | GPIO_ALT_FN_3_IN)
+#define GPIO83_NSSP_TX		(83 | GPIO_ALT_FN_1_OUT)
+#define GPIO83_NSSP_RX		(83 | GPIO_ALT_FN_2_IN)
+#define GPIO83_CIF_DD_4_MD	(83 | GPIO_ALT_FN_3_IN)
+#define GPIO84_NSSP_TX		(84 | GPIO_ALT_FN_1_OUT)
+#define GPIO84_NSSP_RX		(84 | GPIO_ALT_FN_2_IN)
+#define GPIO84_CIF_FV_MD	(84 | GPIO_ALT_FN_3_IN)
+#define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
+#define GPIO85_CIF_LV_MD	(85 | GPIO_ALT_FN_3_IN)
+#define GPIO86_nPCE_1_MD	(86 | GPIO_ALT_FN_1_OUT)
+#define GPIO88_USBH1_PWR_MD	(88 | GPIO_ALT_FN_1_IN)
+#define GPIO89_USBH1_PEN_MD	(89 | GPIO_ALT_FN_2_OUT)
+#define GPIO90_CIF_DD_4_MD	(90 | GPIO_ALT_FN_3_IN)
+#define GPIO91_CIF_DD_5_MD	(91 | GPIO_ALT_FN_3_IN)
+#define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
+#define GPIO93_CIF_DD_6_MD	(93 | GPIO_ALT_FN_2_IN)
+#define GPIO94_CIF_DD_5_MD	(94 | GPIO_ALT_FN_2_IN)
+#define GPIO95_CIF_DD_4_MD	(95 | GPIO_ALT_FN_2_IN)
+#define GPIO95_KP_MKIN6_MD	(95 | GPIO_ALT_FN_3_IN)
+#define GPIO96_KP_DKIN3_MD	(96 | GPIO_ALT_FN_1_IN)
+#define GPIO96_FFRXD_MD		(96 | GPIO_ALT_FN_3_IN)
+#define GPIO97_KP_MKIN3_MD	(97 | GPIO_ALT_FN_3_IN)
+#define GPIO98_CIF_DD_0_MD	(98 | GPIO_ALT_FN_2_IN)
+#define GPIO98_FFRTS_MD		(98 | GPIO_ALT_FN_3_OUT)
+#define GPIO99_FFTXD_MD		(99 | GPIO_ALT_FN_3_OUT)
+#define GPIO100_KP_MKIN0_MD	(100 | GPIO_ALT_FN_1_IN)
+#define GPIO101_KP_MKIN1_MD	(101 | GPIO_ALT_FN_1_IN)
+#define GPIO102_nPCE_1_MD	(102 | GPIO_ALT_FN_1_OUT)
+#define GPIO102_KP_MKIN2_MD	(102 | GPIO_ALT_FN_1_IN)
+#define GPIO103_CIF_DD_3_MD	(103 | GPIO_ALT_FN_1_IN)
+#define GPIO103_KP_MKOUT0_MD	(103 | GPIO_ALT_FN_2_OUT)
+#define GPIO104_CIF_DD_2_MD	(104 | GPIO_ALT_FN_1_IN)
+#define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
+#define GPIO104_KP_MKOUT1_MD	(104 | GPIO_ALT_FN_2_OUT)
+#define GPIO105_CIF_DD_1_MD	(105 | GPIO_ALT_FN_1_IN)
+#define GPIO105_KP_MKOUT2_MD	(105 | GPIO_ALT_FN_2_OUT)
+#define GPIO106_CIF_DD_9_MD	(106 | GPIO_ALT_FN_1_IN)
+#define GPIO106_KP_MKOUT3_MD	(106 | GPIO_ALT_FN_2_OUT)
+#define GPIO107_CIF_DD_8_MD	(107 | GPIO_ALT_FN_1_IN)
+#define GPIO107_KP_MKOUT4_MD	(107 | GPIO_ALT_FN_2_OUT)
+#define GPIO108_CIF_DD_7_MD	(108 | GPIO_ALT_FN_1_IN)
+#define GPIO108_KP_MKOUT5_MD	(108 | GPIO_ALT_FN_2_OUT)
+#define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
+#define GPIO111_MMCDAT3_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO110_MMCCS1_MD	(111 | GPIO_ALT_FN_1_OUT)
+#define GPIO112_MMCCMD_MD	(112 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_I2S_SYSCLK_MD	(113 | GPIO_ALT_FN_1_OUT)
+#define GPIO113_AC97_RESET_N_MD	(113 | GPIO_ALT_FN_2_OUT)
+#define GPIO117_I2CSCL_MD	(117 | GPIO_ALT_FN_1_IN)
+#define GPIO118_I2CSDA_MD	(118 | GPIO_ALT_FN_1_IN)
+
+#endif /* __ASM_ARCH_PXA2XX_GPIO_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
new file mode 100644
index 0000000..806ecfe
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
@@ -0,0 +1,246 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h
+ *
+ *  Taken from pxa-regs.h by Russell King
+ *
+ *  Author:	Nicolas Pitre
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PXA2XX_REGS_H
+#define __PXA2XX_REGS_H
+
+/*
+ * Memory controller
+ */
+
+#define MDCNFG		__REG(0x48000000)  /* SDRAM Configuration Register 0 */
+#define MDREFR		__REG(0x48000004)  /* SDRAM Refresh Control Register */
+#define MSC0		__REG(0x48000008)  /* Static Memory Control Register 0 */
+#define MSC1		__REG(0x4800000C)  /* Static Memory Control Register 1 */
+#define MSC2		__REG(0x48000010)  /* Static Memory Control Register 2 */
+#define MECR		__REG(0x48000014)  /* Expansion Memory (PCMCIA/Compact Flash) Bus Configuration */
+#define SXLCR		__REG(0x48000018)  /* LCR value to be written to SDRAM-Timing Synchronous Flash */
+#define SXCNFG		__REG(0x4800001C)  /* Synchronous Static Memory Control Register */
+#define SXMRS		__REG(0x48000024)  /* MRS value to be written to Synchronous Flash or SMROM */
+#define MCMEM0		__REG(0x48000028)  /* Card interface Common Memory Space Socket 0 Timing */
+#define MCMEM1		__REG(0x4800002C)  /* Card interface Common Memory Space Socket 1 Timing */
+#define MCATT0		__REG(0x48000030)  /* Card interface Attribute Space Socket 0 Timing Configuration */
+#define MCATT1		__REG(0x48000034)  /* Card interface Attribute Space Socket 1 Timing Configuration */
+#define MCIO0		__REG(0x48000038)  /* Card interface I/O Space Socket 0 Timing Configuration */
+#define MCIO1		__REG(0x4800003C)  /* Card interface I/O Space Socket 1 Timing Configuration */
+#define MDMRS		__REG(0x48000040)  /* MRS value to be written to SDRAM */
+#define BOOT_DEF	__REG(0x48000044)  /* Read-Only Boot-Time Register. Contains BOOT_SEL and PKG_SEL */
+
+/*
+ * More handy macros for PCMCIA
+ *
+ * Arg is socket number
+ */
+#define MCMEM(s)	__REG2(0x48000028, (s)<<2 )  /* Card interface Common Memory Space Socket s Timing */
+#define MCATT(s)	__REG2(0x48000030, (s)<<2 )  /* Card interface Attribute Space Socket s Timing Configuration */
+#define MCIO(s)		__REG2(0x48000038, (s)<<2 )  /* Card interface I/O Space Socket s Timing Configuration */
+
+/* MECR register defines */
+#define MECR_NOS	(1 << 0)	/* Number Of Sockets: 0 -> 1 sock, 1 -> 2 sock */
+#define MECR_CIT	(1 << 1)	/* Card Is There: 0 -> no card, 1 -> card inserted */
+
+#define MDREFR_K0DB4	(1 << 29)	/* SDCLK0 Divide by 4 Control/Status */
+#define MDREFR_K2FREE	(1 << 25)	/* SDRAM Free-Running Control */
+#define MDREFR_K1FREE	(1 << 24)	/* SDRAM Free-Running Control */
+#define MDREFR_K0FREE	(1 << 23)	/* SDRAM Free-Running Control */
+#define MDREFR_SLFRSH	(1 << 22)	/* SDRAM Self-Refresh Control/Status */
+#define MDREFR_APD	(1 << 20)	/* SDRAM/SSRAM Auto-Power-Down Enable */
+#define MDREFR_K2DB2	(1 << 19)	/* SDCLK2 Divide by 2 Control/Status */
+#define MDREFR_K2RUN	(1 << 18)	/* SDCLK2 Run Control/Status */
+#define MDREFR_K1DB2	(1 << 17)	/* SDCLK1 Divide by 2 Control/Status */
+#define MDREFR_K1RUN	(1 << 16)	/* SDCLK1 Run Control/Status */
+#define MDREFR_E1PIN	(1 << 15)	/* SDCKE1 Level Control/Status */
+#define MDREFR_K0DB2	(1 << 14)	/* SDCLK0 Divide by 2 Control/Status */
+#define MDREFR_K0RUN	(1 << 13)	/* SDCLK0 Run Control/Status */
+#define MDREFR_E0PIN	(1 << 12)	/* SDCKE0 Level Control/Status */
+
+
+#ifdef CONFIG_PXA27x
+
+#define ARB_CNTRL	__REG(0x48000048)  /* Arbiter Control Register */
+
+#define ARB_DMA_SLV_PARK	(1<<31)	   /* Be parked with DMA slave when idle */
+#define ARB_CI_PARK		(1<<30)	   /* Be parked with Camera Interface when idle */
+#define ARB_EX_MEM_PARK 	(1<<29)	   /* Be parked with external MEMC when idle */
+#define ARB_INT_MEM_PARK	(1<<28)	   /* Be parked with internal MEMC when idle */
+#define ARB_USB_PARK		(1<<27)	   /* Be parked with USB when idle */
+#define ARB_LCD_PARK		(1<<26)	   /* Be parked with LCD when idle */
+#define ARB_DMA_PARK		(1<<25)	   /* Be parked with DMA when idle */
+#define ARB_CORE_PARK		(1<<24)	   /* Be parked with core when idle */
+#define ARB_LOCK_FLAG		(1<<23)	   /* Only Locking masters gain access to the bus */
+
+#endif
+
+
+/*
+ * Power Manager
+ */
+
+#define PMCR		__REG(0x40F00000)  /* Power Manager Control Register */
+#define PSSR		__REG(0x40F00004)  /* Power Manager Sleep Status Register */
+#define PSPR		__REG(0x40F00008)  /* Power Manager Scratch Pad Register */
+#define PWER		__REG(0x40F0000C)  /* Power Manager Wake-up Enable Register */
+#define PRER		__REG(0x40F00010)  /* Power Manager GPIO Rising-Edge Detect Enable Register */
+#define PFER		__REG(0x40F00014)  /* Power Manager GPIO Falling-Edge Detect Enable Register */
+#define PEDR		__REG(0x40F00018)  /* Power Manager GPIO Edge Detect Status Register */
+#define PCFR		__REG(0x40F0001C)  /* Power Manager General Configuration Register */
+#define PGSR0		__REG(0x40F00020)  /* Power Manager GPIO Sleep State Register for GP[31-0] */
+#define PGSR1		__REG(0x40F00024)  /* Power Manager GPIO Sleep State Register for GP[63-32] */
+#define PGSR2		__REG(0x40F00028)  /* Power Manager GPIO Sleep State Register for GP[84-64] */
+#define PGSR3		__REG(0x40F0002C)  /* Power Manager GPIO Sleep State Register for GP[118-96] */
+#define RCSR		__REG(0x40F00030)  /* Reset Controller Status Register */
+
+#define PSLR		__REG(0x40F00034)	/* Power Manager Sleep Config Register */
+#define PSTR		__REG(0x40F00038)	/* Power Manager Standby Config Register */
+#define PSNR		__REG(0x40F0003C)	/* Power Manager Sense Config Register */
+#define PVCR		__REG(0x40F00040)	/* Power Manager VoltageControl Register */
+#define PKWR		__REG(0x40F00050)	/* Power Manager KB Wake-up Enable Reg */
+#define PKSR		__REG(0x40F00054)	/* Power Manager KB Level-Detect Register */
+#define PCMD(x)	__REG2(0x40F00080, (x)<<2)
+#define PCMD0	__REG(0x40F00080 + 0 * 4)
+#define PCMD1	__REG(0x40F00080 + 1 * 4)
+#define PCMD2	__REG(0x40F00080 + 2 * 4)
+#define PCMD3	__REG(0x40F00080 + 3 * 4)
+#define PCMD4	__REG(0x40F00080 + 4 * 4)
+#define PCMD5	__REG(0x40F00080 + 5 * 4)
+#define PCMD6	__REG(0x40F00080 + 6 * 4)
+#define PCMD7	__REG(0x40F00080 + 7 * 4)
+#define PCMD8	__REG(0x40F00080 + 8 * 4)
+#define PCMD9	__REG(0x40F00080 + 9 * 4)
+#define PCMD10	__REG(0x40F00080 + 10 * 4)
+#define PCMD11	__REG(0x40F00080 + 11 * 4)
+#define PCMD12	__REG(0x40F00080 + 12 * 4)
+#define PCMD13	__REG(0x40F00080 + 13 * 4)
+#define PCMD14	__REG(0x40F00080 + 14 * 4)
+#define PCMD15	__REG(0x40F00080 + 15 * 4)
+#define PCMD16	__REG(0x40F00080 + 16 * 4)
+#define PCMD17	__REG(0x40F00080 + 17 * 4)
+#define PCMD18	__REG(0x40F00080 + 18 * 4)
+#define PCMD19	__REG(0x40F00080 + 19 * 4)
+#define PCMD20	__REG(0x40F00080 + 20 * 4)
+#define PCMD21	__REG(0x40F00080 + 21 * 4)
+#define PCMD22	__REG(0x40F00080 + 22 * 4)
+#define PCMD23	__REG(0x40F00080 + 23 * 4)
+#define PCMD24	__REG(0x40F00080 + 24 * 4)
+#define PCMD25	__REG(0x40F00080 + 25 * 4)
+#define PCMD26	__REG(0x40F00080 + 26 * 4)
+#define PCMD27	__REG(0x40F00080 + 27 * 4)
+#define PCMD28	__REG(0x40F00080 + 28 * 4)
+#define PCMD29	__REG(0x40F00080 + 29 * 4)
+#define PCMD30	__REG(0x40F00080 + 30 * 4)
+#define PCMD31	__REG(0x40F00080 + 31 * 4)
+
+#define PCMD_MBC	(1<<12)
+#define PCMD_DCE	(1<<11)
+#define PCMD_LC	(1<<10)
+/* FIXME:  PCMD_SQC need be checked.   */
+#define PCMD_SQC	(3<<8)	/* currently only bit 8 is changeable,
+				   bit 9 should be 0 all day. */
+#define PVCR_VCSA	(0x1<<14)
+#define PVCR_CommandDelay (0xf80)
+#define PCFR_PI2C_EN	(0x1 << 6)
+
+#define PSSR_OTGPH	(1 << 6)	/* OTG Peripheral control Hold */
+#define PSSR_RDH	(1 << 5)	/* Read Disable Hold */
+#define PSSR_PH		(1 << 4)	/* Peripheral Control Hold */
+#define PSSR_STS	(1 << 3)	/* Standby Mode Status */
+#define PSSR_VFS	(1 << 2)	/* VDD Fault Status */
+#define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
+#define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
+
+#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
+#define PCFR_RO		(1 << 15)	/* RDH Override */
+#define PCFR_PO		(1 << 14)	/* PH Override */
+#define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
+#define PCFR_L1_EN	(1 << 11)	/* Sleep Mode L1 converter Enable */
+#define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
+#define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
+#define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
+#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
+#define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
+#define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
+#define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
+#define PCFR_OPDE	(1 << 0)	/* 3.6864 MHz oscillator power-down enable */
+
+#define RCSR_GPR	(1 << 3)	/* GPIO Reset */
+#define RCSR_SMR	(1 << 2)	/* Sleep Mode */
+#define RCSR_WDR	(1 << 1)	/* Watchdog Reset */
+#define RCSR_HWR	(1 << 0)	/* Hardware Reset */
+
+#define PWER_GPIO(Nb)	(1 << Nb)	/* GPIO [0..15] wake-up enable     */
+#define PWER_GPIO0	PWER_GPIO (0)	/* GPIO  [0] wake-up enable        */
+#define PWER_GPIO1	PWER_GPIO (1)	/* GPIO  [1] wake-up enable        */
+#define PWER_GPIO2	PWER_GPIO (2)	/* GPIO  [2] wake-up enable        */
+#define PWER_GPIO3	PWER_GPIO (3)	/* GPIO  [3] wake-up enable        */
+#define PWER_GPIO4	PWER_GPIO (4)	/* GPIO  [4] wake-up enable        */
+#define PWER_GPIO5	PWER_GPIO (5)	/* GPIO  [5] wake-up enable        */
+#define PWER_GPIO6	PWER_GPIO (6)	/* GPIO  [6] wake-up enable        */
+#define PWER_GPIO7	PWER_GPIO (7)	/* GPIO  [7] wake-up enable        */
+#define PWER_GPIO8	PWER_GPIO (8)	/* GPIO  [8] wake-up enable        */
+#define PWER_GPIO9	PWER_GPIO (9)	/* GPIO  [9] wake-up enable        */
+#define PWER_GPIO10	PWER_GPIO (10)	/* GPIO [10] wake-up enable        */
+#define PWER_GPIO11	PWER_GPIO (11)	/* GPIO [11] wake-up enable        */
+#define PWER_GPIO12	PWER_GPIO (12)	/* GPIO [12] wake-up enable        */
+#define PWER_GPIO13	PWER_GPIO (13)	/* GPIO [13] wake-up enable        */
+#define PWER_GPIO14	PWER_GPIO (14)	/* GPIO [14] wake-up enable        */
+#define PWER_GPIO15	PWER_GPIO (15)	/* GPIO [15] wake-up enable        */
+#define PWER_RTC	0x80000000	/* RTC alarm wake-up enable        */
+
+/*
+ * PXA2xx specific Core clock definitions
+ */
+#define CCCR		__REG(0x41300000)  /* Core Clock Configuration Register */
+#define CCSR		__REG(0x4130000C)  /* Core Clock Status Register */
+#define CKEN		__REG(0x41300004)  /* Clock Enable Register */
+#define OSCC		__REG(0x41300008)  /* Oscillator Configuration Register */
+
+#define CCCR_N_MASK	0x0380	/* Run Mode Frequency to Turbo Mode Frequency Multiplier */
+#define CCCR_M_MASK	0x0060	/* Memory Frequency to Run Mode Frequency Multiplier */
+#define CCCR_L_MASK	0x001f	/* Crystal Frequency to Memory Frequency Multiplier */
+
+#define CKEN_AC97CONF   (31)    /* AC97 Controller Configuration */
+#define CKEN_CAMERA	(24)	/* Camera Interface Clock Enable */
+#define CKEN_SSP1	(23)	/* SSP1 Unit Clock Enable */
+#define CKEN_MEMC	(22)	/* Memory Controller Clock Enable */
+#define CKEN_MEMSTK	(21)	/* Memory Stick Host Controller */
+#define CKEN_IM		(20)	/* Internal Memory Clock Enable */
+#define CKEN_KEYPAD	(19)	/* Keypad Interface Clock Enable */
+#define CKEN_USIM	(18)	/* USIM Unit Clock Enable */
+#define CKEN_MSL	(17)	/* MSL Unit Clock Enable */
+#define CKEN_LCD	(16)	/* LCD Unit Clock Enable */
+#define CKEN_PWRI2C	(15)	/* PWR I2C Unit Clock Enable */
+#define CKEN_I2C	(14)	/* I2C Unit Clock Enable */
+#define CKEN_FICP	(13)	/* FICP Unit Clock Enable */
+#define CKEN_MMC	(12)	/* MMC Unit Clock Enable */
+#define CKEN_USB	(11)	/* USB Unit Clock Enable */
+#define CKEN_ASSP	(10)	/* ASSP (SSP3) Clock Enable */
+#define CKEN_USBHOST	(10)	/* USB Host Unit Clock Enable */
+#define CKEN_OSTIMER	(9)	/* OS Timer Unit Clock Enable */
+#define CKEN_NSSP	(9)	/* NSSP (SSP2) Clock Enable */
+#define CKEN_I2S	(8)	/* I2S Unit Clock Enable */
+#define CKEN_BTUART	(7)	/* BTUART Unit Clock Enable */
+#define CKEN_FFUART	(6)	/* FFUART Unit Clock Enable */
+#define CKEN_STUART	(5)	/* STUART Unit Clock Enable */
+#define CKEN_HWUART	(4)	/* HWUART Unit Clock Enable */
+#define CKEN_SSP3	(4)	/* SSP3 Unit Clock Enable */
+#define CKEN_SSP	(3)	/* SSP Unit Clock Enable */
+#define CKEN_SSP2	(3)	/* SSP2 Unit Clock Enable */
+#define CKEN_AC97	(2)	/* AC97 Unit Clock Enable */
+#define CKEN_PWM1	(1)	/* PWM1 Clock Enable */
+#define CKEN_PWM0	(0)	/* PWM0 Clock Enable */
+
+#define OSCC_OON	(1 << 1)	/* 32.768kHz OON (write-once only bit) */
+#define OSCC_OOK	(1 << 0)	/* 32.768kHz OOK (read-only bit) */
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
new file mode 100644
index 0000000..2206cb6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa2xx_spi.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2005 Stephen Street / StreetFire Sound Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef PXA2XX_SPI_H_
+#define PXA2XX_SPI_H_
+
+#define PXA2XX_CS_ASSERT (0x01)
+#define PXA2XX_CS_DEASSERT (0x02)
+
+/* device.platform_data for SSP controller devices */
+struct pxa2xx_spi_master {
+	u32 clock_enable;
+	u16 num_chipselect;
+	u8 enable_dma;
+};
+
+/* spi_board_info.controller_data for SPI slave devices,
+ * copied to spi_device.platform_data ... mostly for dma tuning
+ */
+struct pxa2xx_spi_chip {
+	u8 tx_threshold;
+	u8 rx_threshold;
+	u8 dma_burst_size;
+	u32 timeout;
+	u8 enable_loopback;
+	void (*cs_control)(u32 command);
+};
+
+extern void pxa2xx_set_spi_info(unsigned id, struct pxa2xx_spi_master *info);
+
+#endif /*PXA2XX_SPI_H_*/
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
new file mode 100644
index 0000000..b1fcd10
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
@@ -0,0 +1,205 @@
+/*
+ * arch/arm/mach-pxa/include/mach/pxa3xx-regs.h
+ *
+ * PXA3xx specific register definitions
+ *
+ * Copyright (C) 2007 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_PXA3XX_REGS_H
+#define __ASM_ARCH_PXA3XX_REGS_H
+
+/*
+ * Oscillator Configuration Register (OSCC)
+ */
+#define OSCC           __REG(0x41350000)  /* Oscillator Configuration Register */
+
+#define OSCC_PEN       (1 << 11)       /* 13MHz POUT */
+
+
+/*
+ * Service Power Management Unit (MPMU)
+ */
+#define PMCR		__REG(0x40F50000)	/* Power Manager Control Register */
+#define PSR		__REG(0x40F50004)	/* Power Manager S2 Status Register */
+#define PSPR		__REG(0x40F50008)	/* Power Manager Scratch Pad Register */
+#define PCFR		__REG(0x40F5000C)	/* Power Manager General Configuration Register */
+#define PWER		__REG(0x40F50010)	/* Power Manager Wake-up Enable Register */
+#define PWSR		__REG(0x40F50014)	/* Power Manager Wake-up Status Register */
+#define PECR		__REG(0x40F50018)	/* Power Manager EXT_WAKEUP[1:0] Control Register */
+#define DCDCSR		__REG(0x40F50080)	/* DC-DC Controller Status Register */
+#define PVCR		__REG(0x40F50100)	/* Power Manager Voltage Change Control Register */
+#define PCMD(x)		__REG(0x40F50110 + ((x) << 2))
+
+/*
+ * Slave Power Managment Unit
+ */
+#define ASCR		__REG(0x40f40000)	/* Application Subsystem Power Status/Configuration */
+#define ARSR		__REG(0x40f40004)	/* Application Subsystem Reset Status */
+#define AD3ER		__REG(0x40f40008)	/* Application Subsystem Wake-Up from D3 Enable */
+#define AD3SR		__REG(0x40f4000c)	/* Application Subsystem Wake-Up from D3 Status */
+#define AD2D0ER		__REG(0x40f40010)	/* Application Subsystem Wake-Up from D2 to D0 Enable */
+#define AD2D0SR		__REG(0x40f40014)	/* Application Subsystem Wake-Up from D2 to D0 Status */
+#define AD2D1ER		__REG(0x40f40018)	/* Application Subsystem Wake-Up from D2 to D1 Enable */
+#define AD2D1SR		__REG(0x40f4001c)	/* Application Subsystem Wake-Up from D2 to D1 Status */
+#define AD1D0ER		__REG(0x40f40020)	/* Application Subsystem Wake-Up from D1 to D0 Enable */
+#define AD1D0SR		__REG(0x40f40024)	/* Application Subsystem Wake-Up from D1 to D0 Status */
+#define AGENP		__REG(0x40f4002c)	/* Application Subsystem General Purpose */
+#define AD3R		__REG(0x40f40030)	/* Application Subsystem D3 Configuration */
+#define AD2R		__REG(0x40f40034)	/* Application Subsystem D2 Configuration */
+#define AD1R		__REG(0x40f40038)	/* Application Subsystem D1 Configuration */
+
+/*
+ * Application Subsystem Configuration bits.
+ */
+#define ASCR_RDH		(1 << 31)
+#define ASCR_D1S		(1 << 2)
+#define ASCR_D2S		(1 << 1)
+#define ASCR_D3S		(1 << 0)
+
+/*
+ * Application Reset Status bits.
+ */
+#define ARSR_GPR		(1 << 3)
+#define ARSR_LPMR		(1 << 2)
+#define ARSR_WDT		(1 << 1)
+#define ARSR_HWR		(1 << 0)
+
+/*
+ * Application Subsystem Wake-Up bits.
+ */
+#define ADXER_WRTC		(1 << 31)	/* RTC */
+#define ADXER_WOST		(1 << 30)	/* OS Timer */
+#define ADXER_WTSI		(1 << 29)	/* Touchscreen */
+#define ADXER_WUSBH		(1 << 28)	/* USB host */
+#define ADXER_WUSB2		(1 << 26)	/* USB client 2.0 */
+#define ADXER_WMSL0		(1 << 24)	/* MSL port 0*/
+#define ADXER_WDMUX3		(1 << 23)	/* USB EDMUX3 */
+#define ADXER_WDMUX2		(1 << 22)	/* USB EDMUX2 */
+#define ADXER_WKP		(1 << 21)	/* Keypad */
+#define ADXER_WUSIM1		(1 << 20)	/* USIM Port 1 */
+#define ADXER_WUSIM0		(1 << 19)	/* USIM Port 0 */
+#define ADXER_WOTG		(1 << 16)	/* USBOTG input */
+#define ADXER_MFP_WFLASH	(1 << 15)	/* MFP: Data flash busy */
+#define ADXER_MFP_GEN12		(1 << 14)	/* MFP: MMC3/GPIO/OST inputs */
+#define ADXER_MFP_WMMC2		(1 << 13)	/* MFP: MMC2 */
+#define ADXER_MFP_WMMC1		(1 << 12)	/* MFP: MMC1 */
+#define ADXER_MFP_WI2C		(1 << 11)	/* MFP: I2C */
+#define ADXER_MFP_WSSP4		(1 << 10)	/* MFP: SSP4 */
+#define ADXER_MFP_WSSP3		(1 << 9)	/* MFP: SSP3 */
+#define ADXER_MFP_WMAXTRIX	(1 << 8)	/* MFP: matrix keypad */
+#define ADXER_MFP_WUART3	(1 << 7)	/* MFP: UART3 */
+#define ADXER_MFP_WUART2	(1 << 6)	/* MFP: UART2 */
+#define ADXER_MFP_WUART1	(1 << 5)	/* MFP: UART1 */
+#define ADXER_MFP_WSSP2		(1 << 4)	/* MFP: SSP2 */
+#define ADXER_MFP_WSSP1		(1 << 3)	/* MFP: SSP1 */
+#define ADXER_MFP_WAC97		(1 << 2)	/* MFP: AC97 */
+#define ADXER_WEXTWAKE1		(1 << 1)	/* External Wake 1 */
+#define ADXER_WEXTWAKE0		(1 << 0)	/* External Wake 0 */
+
+/*
+ * AD3R/AD2R/AD1R bits.  R2-R5 are only defined for PXA320.
+ */
+#define ADXR_L2			(1 << 8)
+#define ADXR_R5			(1 << 5)
+#define ADXR_R4			(1 << 4)
+#define ADXR_R3			(1 << 3)
+#define ADXR_R2			(1 << 2)
+#define ADXR_R1			(1 << 1)
+#define ADXR_R0			(1 << 0)
+
+/*
+ * Values for PWRMODE CP15 register
+ */
+#define PXA3xx_PM_S3D4C4	0x07	/* aka deep sleep */
+#define PXA3xx_PM_S2D3C4	0x06	/* aka sleep */
+#define PXA3xx_PM_S0D2C2	0x03	/* aka standby */
+#define PXA3xx_PM_S0D1C2	0x02	/* aka LCD refresh */
+#define PXA3xx_PM_S0D0C1	0x01
+
+/*
+ * Application Subsystem Clock
+ */
+#define ACCR		__REG(0x41340000)	/* Application Subsystem Clock Configuration Register */
+#define ACSR		__REG(0x41340004)	/* Application Subsystem Clock Status Register */
+#define AICSR		__REG(0x41340008)	/* Application Subsystem Interrupt Control/Status Register */
+#define CKENA		__REG(0x4134000C)	/* A Clock Enable Register */
+#define CKENB		__REG(0x41340010)	/* B Clock Enable Register */
+#define AC97_DIV	__REG(0x41340014)	/* AC97 clock divisor value register */
+
+#define ACCR_XPDIS		(1 << 31)	/* Core PLL Output Disable */
+#define ACCR_SPDIS		(1 << 30)	/* System PLL Output Disable */
+#define ACCR_D0CS		(1 << 26)	/* D0 Mode Clock Select */
+#define ACCR_PCCE		(1 << 11)	/* Power Mode Change Clock Enable */
+#define ACCR_DDR_D0CS		(1 << 7)	/* DDR SDRAM clock frequency in D0CS (PXA31x only) */
+
+#define ACCR_SMCFS_MASK		(0x7 << 23)	/* Static Memory Controller Frequency Select */
+#define ACCR_SFLFS_MASK		(0x3 << 18)	/* Frequency Select for Internal Memory Controller */
+#define ACCR_XSPCLK_MASK	(0x3 << 16)	/* Core Frequency during Frequency Change */
+#define ACCR_HSS_MASK		(0x3 << 14)	/* System Bus-Clock Frequency Select */
+#define ACCR_DMCFS_MASK		(0x3 << 12)	/* Dynamic Memory Controller Clock Frequency Select */
+#define ACCR_XN_MASK		(0x7 << 8)	/* Core PLL Turbo-Mode-to-Run-Mode Ratio */
+#define ACCR_XL_MASK		(0x1f)		/* Core PLL Run-Mode-to-Oscillator Ratio */
+
+#define ACCR_SMCFS(x)		(((x) & 0x7) << 23)
+#define ACCR_SFLFS(x)		(((x) & 0x3) << 18)
+#define ACCR_XSPCLK(x)		(((x) & 0x3) << 16)
+#define ACCR_HSS(x)		(((x) & 0x3) << 14)
+#define ACCR_DMCFS(x)		(((x) & 0x3) << 12)
+#define ACCR_XN(x)		(((x) & 0x7) << 8)
+#define ACCR_XL(x)		((x) & 0x1f)
+
+/*
+ * Clock Enable Bit
+ */
+#define CKEN_LCD	1	/* < LCD Clock Enable */
+#define CKEN_USBH	2	/* < USB host clock enable */
+#define CKEN_CAMERA	3	/* < Camera interface clock enable */
+#define CKEN_NAND	4	/* < NAND Flash Controller Clock Enable */
+#define CKEN_USB2	6	/* < USB 2.0 client clock enable. */
+#define CKEN_DMC	8	/* < Dynamic Memory Controller clock enable */
+#define CKEN_SMC	9	/* < Static Memory Controller clock enable */
+#define CKEN_ISC	10	/* < Internal SRAM Controller clock enable */
+#define CKEN_BOOT	11	/* < Boot rom clock enable */
+#define CKEN_MMC1	12	/* < MMC1 Clock enable */
+#define CKEN_MMC2	13	/* < MMC2 clock enable */
+#define CKEN_KEYPAD	14	/* < Keypand Controller Clock Enable */
+#define CKEN_CIR	15	/* < Consumer IR Clock Enable */
+#define CKEN_USIM0	17	/* < USIM[0] Clock Enable */
+#define CKEN_USIM1	18	/* < USIM[1] Clock Enable */
+#define CKEN_TPM	19	/* < TPM clock enable */
+#define CKEN_UDC	20	/* < UDC clock enable */
+#define CKEN_BTUART	21	/* < BTUART clock enable */
+#define CKEN_FFUART	22	/* < FFUART clock enable */
+#define CKEN_STUART	23	/* < STUART clock enable */
+#define CKEN_AC97	24	/* < AC97 clock enable */
+#define CKEN_TOUCH	25	/* < Touch screen Interface Clock Enable */
+#define CKEN_SSP1	26	/* < SSP1 clock enable */
+#define CKEN_SSP2	27	/* < SSP2 clock enable */
+#define CKEN_SSP3	28	/* < SSP3 clock enable */
+#define CKEN_SSP4	29	/* < SSP4 clock enable */
+#define CKEN_MSL0	30	/* < MSL0 clock enable */
+#define CKEN_PWM0	32	/* < PWM[0] clock enable */
+#define CKEN_PWM1	33	/* < PWM[1] clock enable */
+#define CKEN_I2C	36	/* < I2C clock enable */
+#define CKEN_INTC	38	/* < Interrupt controller clock enable */
+#define CKEN_GPIO	39	/* < GPIO clock enable */
+#define CKEN_1WIRE	40	/* < 1-wire clock enable */
+#define CKEN_HSIO2	41	/* < HSIO2 clock enable */
+#define CKEN_MINI_IM	48	/* < Mini-IM */
+#define CKEN_MINI_LCD	49	/* < Mini LCD */
+
+#if defined(CONFIG_CPU_PXA310)
+#define CKEN_MMC3	5	/* < MMC3 Clock Enable */
+#define CKEN_MVED	43	/* < MVED clock enable */
+#endif
+
+/* Note: GCU clock enable bit differs on PXA300/PXA310 and PXA320 */
+#define PXA300_CKEN_GRAPHICS	42	/* Graphics controller clock enable */
+#define PXA320_CKEN_GRAPHICS	7	/* Graphics controller clock enable */
+
+#endif /* __ASM_ARCH_PXA3XX_REGS_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
new file mode 100644
index 0000000..eb4b190
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
@@ -0,0 +1,20 @@
+#ifndef __ASM_ARCH_PXA3XX_NAND_H
+#define __ASM_ARCH_PXA3XX_NAND_H
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+struct pxa3xx_nand_platform_data {
+
+	/* the data flash bus is shared between the Static Memory
+	 * Controller and the Data Flash Controller,  the arbiter
+	 * controls the ownership of the bus
+	 */
+	int	enable_arbiter;
+
+	struct mtd_partition *parts;
+	unsigned int	nr_parts;
+};
+
+extern void pxa3xx_set_nand_info(struct pxa3xx_nand_platform_data *info);
+#endif /* __ASM_ARCH_PXA3XX_NAND_H */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
new file mode 100644
index 0000000..8e59111
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -0,0 +1,153 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/pxafb.h
+ *
+ *  Support for the xscale frame buffer.
+ *
+ *  Author:     Jean-Frederic Clere
+ *  Created:    Sep 22, 2003
+ *  Copyright:  jfclere@sinix.net
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/fb.h>
+#include <mach/regs-lcd.h>
+
+/*
+ * Supported LCD connections
+ *
+ * bits 0 - 3: for LCD panel type:
+ *
+ *   STN  - for passive matrix
+ *   DSTN - for dual scan passive matrix
+ *   TFT  - for active matrix
+ *
+ * bits 4 - 9 : for bus width
+ * bits 10-17 : for AC Bias Pin Frequency
+ * bit     18 : for output enable polarity
+ * bit     19 : for pixel clock edge
+ * bit     20 : for output pixel format when base is RGBT16
+ */
+#define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
+#define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
+
+#define LCD_TYPE_UNKNOWN	0
+#define LCD_TYPE_MONO_STN	1
+#define LCD_TYPE_MONO_DSTN	2
+#define LCD_TYPE_COLOR_STN	3
+#define LCD_TYPE_COLOR_DSTN	4
+#define LCD_TYPE_COLOR_TFT	5
+#define LCD_TYPE_SMART_PANEL	6
+#define LCD_TYPE_MAX		7
+
+#define LCD_MONO_STN_4BPP	((4  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_STN_8BPP	((8  << 4) | LCD_TYPE_MONO_STN)
+#define LCD_MONO_DSTN_8BPP	((8  << 4) | LCD_TYPE_MONO_DSTN)
+#define LCD_COLOR_STN_8BPP	((8  << 4) | LCD_TYPE_COLOR_STN)
+#define LCD_COLOR_DSTN_16BPP	((16 << 4) | LCD_TYPE_COLOR_DSTN)
+#define LCD_COLOR_TFT_16BPP	((16 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_COLOR_TFT_18BPP	((18 << 4) | LCD_TYPE_COLOR_TFT)
+#define LCD_SMART_PANEL_8BPP	((8  << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_16BPP	((16 << 4) | LCD_TYPE_SMART_PANEL)
+#define LCD_SMART_PANEL_18BPP	((18 << 4) | LCD_TYPE_SMART_PANEL)
+
+#define LCD_AC_BIAS_FREQ(x)	(((x) & 0xff) << 10)
+#define LCD_BIAS_ACTIVE_HIGH	(0 << 18)
+#define LCD_BIAS_ACTIVE_LOW	(1 << 18)
+#define LCD_PCLK_EDGE_RISE	(0 << 19)
+#define LCD_PCLK_EDGE_FALL	(1 << 19)
+#define LCD_ALTERNATE_MAPPING	(1 << 20)
+
+/*
+ * This structure describes the machine which we are running on.
+ * It is set in linux/arch/arm/mach-pxa/machine_name.c and used in the probe routine
+ * of linux/drivers/video/pxafb.c
+ */
+struct pxafb_mode_info {
+	u_long		pixclock;
+
+	u_short		xres;
+	u_short		yres;
+
+	u_char		bpp;
+	u_int		cmap_greyscale:1,
+			depth:8,
+			unused:23;
+
+	/* Parallel Mode Timing */
+	u_char		hsync_len;
+	u_char		left_margin;
+	u_char		right_margin;
+
+	u_char		vsync_len;
+	u_char		upper_margin;
+	u_char		lower_margin;
+	u_char		sync;
+
+	/* Smart Panel Mode Timing - see PXA27x DM 7.4.15.0.3 for details
+	 * Note:
+	 * 1. all parameters in nanosecond (ns)
+	 * 2. a0cs{rd,wr}_set_hld are controlled by the same register bits
+	 *    in pxa27x and pxa3xx, initialize them to the same value or
+	 *    the larger one will be used
+	 * 3. same to {rd,wr}_pulse_width
+	 */
+	unsigned	a0csrd_set_hld;	/* A0 and CS Setup/Hold Time before/after L_FCLK_RD */
+	unsigned	a0cswr_set_hld;	/* A0 and CS Setup/Hold Time before/after L_PCLK_WR */
+	unsigned	wr_pulse_width;	/* L_PCLK_WR pulse width */
+	unsigned	rd_pulse_width;	/* L_FCLK_RD pulse width */
+	unsigned	cmd_inh_time;	/* Command Inhibit time between two writes */
+	unsigned	op_hold_time;	/* Output Hold time from L_FCLK_RD negation */
+};
+
+struct pxafb_mach_info {
+	struct pxafb_mode_info *modes;
+	unsigned int num_modes;
+
+	unsigned int	lcd_conn;
+
+	u_int		fixed_modes:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	/* The following should be defined in LCCR0
+	 *      LCCR0_Act or LCCR0_Pas          Active or Passive
+	 *      LCCR0_Sngl or LCCR0_Dual        Single/Dual panel
+	 *      LCCR0_Mono or LCCR0_Color       Mono/Color
+	 *      LCCR0_4PixMono or LCCR0_8PixMono (in mono single mode)
+	 *      LCCR0_DMADel(Tcpu) (optional)   DMA request delay
+	 *
+	 * The following should not be defined in LCCR0:
+	 *      LCCR0_OUM, LCCR0_BM, LCCR0_QDM, LCCR0_DIS, LCCR0_EFM
+	 *      LCCR0_IUM, LCCR0_SFM, LCCR0_LDM, LCCR0_ENB
+	 */
+	u_int		lccr0;
+	/* The following should be defined in LCCR3
+	 *      LCCR3_OutEnH or LCCR3_OutEnL    Output enable polarity
+	 *      LCCR3_PixRsEdg or LCCR3_PixFlEdg Pixel clock edge type
+	 *      LCCR3_Acb(X)                    AB Bias pin frequency
+	 *      LCCR3_DPC (optional)            Double Pixel Clock mode (untested)
+	 *
+	 * The following should not be defined in LCCR3
+	 *      LCCR3_HSP, LCCR3_VSP, LCCR0_Pcd(x), LCCR3_Bpp
+	 */
+	u_int		lccr3;
+	/* The following should be defined in LCCR4
+	 *	LCCR4_PAL_FOR_0 or LCCR4_PAL_FOR_1 or LCCR4_PAL_FOR_2
+	 *
+	 * All other bits in LCCR4 should be left alone.
+	 */
+	u_int		lccr4;
+	void (*pxafb_backlight_power)(int);
+	void (*pxafb_lcd_power)(int, struct fb_var_screeninfo *);
+	void (*smart_update)(struct fb_info *);
+};
+void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
+
+extern int pxafb_smart_queue(struct fb_info *info, uint16_t *cmds, int);
+extern int pxafb_smart_flush(struct fb_info *info);
diff --git a/arch/arm/mach-pxa/include/mach/regs-lcd.h b/arch/arm/mach-pxa/include/mach/regs-lcd.h
new file mode 100644
index 0000000..c689c4e
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-lcd.h
@@ -0,0 +1,180 @@
+#ifndef __ASM_ARCH_REGS_LCD_H
+#define __ASM_ARCH_REGS_LCD_H
+
+#include <mach/bitfield.h>
+
+/*
+ * LCD Controller Registers and Bits Definitions
+ */
+#define LCCR0		(0x000)	/* LCD Controller Control Register 0 */
+#define LCCR1		(0x004)	/* LCD Controller Control Register 1 */
+#define LCCR2		(0x008)	/* LCD Controller Control Register 2 */
+#define LCCR3		(0x00C)	/* LCD Controller Control Register 3 */
+#define LCCR4		(0x010)	/* LCD Controller Control Register 4 */
+#define LCCR5		(0x014)	/* LCD Controller Control Register 5 */
+#define DFBR0		(0x020)	/* DMA Channel 0 Frame Branch Register */
+#define DFBR1		(0x024)	/* DMA Channel 1 Frame Branch Register */
+#define LCSR		(0x038)	/* LCD Controller Status Register */
+#define LIIDR		(0x03C)	/* LCD Controller Interrupt ID Register */
+#define TMEDRGBR	(0x040)	/* TMED RGB Seed Register */
+#define TMEDCR		(0x044)	/* TMED Control Register */
+
+#define CMDCR		(0x100)	/* Command Control Register */
+#define PRSR		(0x104)	/* Panel Read Status Register */
+
+#define LCCR3_1BPP	(0 << 24)
+#define LCCR3_2BPP	(1 << 24)
+#define LCCR3_4BPP	(2 << 24)
+#define LCCR3_8BPP	(3 << 24)
+#define LCCR3_16BPP	(4 << 24)
+#define LCCR3_18BPP	(5 << 24)
+#define LCCR3_18BPP_P	(6 << 24)
+#define LCCR3_19BPP	(7 << 24)
+#define LCCR3_19BPP_P	(1 << 29)
+#define LCCR3_24BPP	((1 << 29) | (1 << 24))
+#define LCCR3_25BPP	((1 << 29) | (2 << 24))
+
+#define LCCR3_PDFOR_0	(0 << 30)
+#define LCCR3_PDFOR_1	(1 << 30)
+#define LCCR3_PDFOR_2	(2 << 30)
+#define LCCR3_PDFOR_3	(3 << 30)
+
+#define LCCR4_PAL_FOR_0	(0 << 15)
+#define LCCR4_PAL_FOR_1	(1 << 15)
+#define LCCR4_PAL_FOR_2	(2 << 15)
+#define LCCR4_PAL_FOR_MASK	(3 << 15)
+
+#define FDADR0		(0x200)	/* DMA Channel 0 Frame Descriptor Address Register */
+#define FSADR0		(0x204)	/* DMA Channel 0 Frame Source Address Register */
+#define FIDR0		(0x208)	/* DMA Channel 0 Frame ID Register */
+#define LDCMD0		(0x20C)	/* DMA Channel 0 Command Register */
+#define FDADR1		(0x210)	/* DMA Channel 1 Frame Descriptor Address Register */
+#define FSADR1		(0x214)	/* DMA Channel 1 Frame Source Address Register */
+#define FIDR1		(0x218)	/* DMA Channel 1 Frame ID Register */
+#define LDCMD1		(0x21C)	/* DMA Channel 1 Command Register */
+#define FDADR6		(0x260) /* DMA Channel 6 Frame Descriptor Address Register */
+#define FSADR6		(0x264) /* DMA Channel 6 Frame Source Address Register */
+#define FIDR6		(0x268) /* DMA Channel 6 Frame ID Register */
+
+#define LCCR0_ENB	(1 << 0)	/* LCD Controller enable */
+#define LCCR0_CMS	(1 << 1)	/* Color/Monochrome Display Select */
+#define LCCR0_Color	(LCCR0_CMS*0)	/*  Color display */
+#define LCCR0_Mono	(LCCR0_CMS*1)	/*  Monochrome display */
+#define LCCR0_SDS	(1 << 2)	/* Single/Dual Panel Display Select */
+#define LCCR0_Sngl	(LCCR0_SDS*0)	/*  Single panel display */
+#define LCCR0_Dual	(LCCR0_SDS*1)	/*  Dual panel display */
+
+#define LCCR0_LDM	(1 << 3)	/* LCD Disable Done Mask */
+#define LCCR0_SFM	(1 << 4)	/* Start of frame mask */
+#define LCCR0_IUM	(1 << 5)	/* Input FIFO underrun mask */
+#define LCCR0_EFM	(1 << 6)	/* End of Frame mask */
+#define LCCR0_PAS	(1 << 7)	/* Passive/Active display Select */
+#define LCCR0_Pas	(LCCR0_PAS*0)	/*  Passive display (STN) */
+#define LCCR0_Act	(LCCR0_PAS*1)	/*  Active display (TFT) */
+#define LCCR0_DPD	(1 << 9)	/* Double Pixel Data (monochrome) */
+#define LCCR0_4PixMono	(LCCR0_DPD*0)	/*  4-Pixel/clock Monochrome display */
+#define LCCR0_8PixMono	(LCCR0_DPD*1)	/*  8-Pixel/clock Monochrome display */
+#define LCCR0_DIS	(1 << 10)	/* LCD Disable */
+#define LCCR0_QDM	(1 << 11)	/* LCD Quick Disable mask */
+#define LCCR0_PDD	(0xff << 12)	/* Palette DMA request delay */
+#define LCCR0_PDD_S	12
+#define LCCR0_BM	(1 << 20)	/* Branch mask */
+#define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#define LCCR0_LCDT	(1 << 22)	/* LCD panel type */
+#define LCCR0_RDSTM	(1 << 23)	/* Read status interrupt mask */
+#define LCCR0_CMDIM	(1 << 24)	/* Command interrupt mask */
+#define LCCR0_OUC	(1 << 25)	/* Overlay Underlay control bit */
+#define LCCR0_LDDALT	(1 << 26)	/* LDD alternate mapping control */
+
+#define LCCR1_PPL	Fld (10, 0)	/* Pixels Per Line - 1 */
+#define LCCR1_DisWdth(Pixel)	(((Pixel) - 1) << FShft (LCCR1_PPL))
+
+#define LCCR1_HSW	Fld (6, 10)	/* Horizontal Synchronization */
+#define LCCR1_HorSnchWdth(Tpix)	(((Tpix) - 1) << FShft (LCCR1_HSW))
+
+#define LCCR1_ELW	Fld (8, 16)	/* End-of-Line pixel clock Wait - 1 */
+#define LCCR1_EndLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_ELW))
+
+#define LCCR1_BLW	Fld (8, 24)	/* Beginning-of-Line pixel clock */
+#define LCCR1_BegLnDel(Tpix)	(((Tpix) - 1) << FShft (LCCR1_BLW))
+
+#define LCCR2_LPP	Fld (10, 0)	/* Line Per Panel - 1 */
+#define LCCR2_DisHght(Line)	(((Line) - 1) << FShft (LCCR2_LPP))
+
+#define LCCR2_VSW	Fld (6, 10)	/* Vertical Synchronization pulse - 1 */
+#define LCCR2_VrtSnchWdth(Tln)	(((Tln) - 1) << FShft (LCCR2_VSW))
+
+#define LCCR2_EFW	Fld (8, 16)	/* End-of-Frame line clock Wait */
+#define LCCR2_EndFrmDel(Tln)	((Tln) << FShft (LCCR2_EFW))
+
+#define LCCR2_BFW	Fld (8, 24)	/* Beginning-of-Frame line clock */
+#define LCCR2_BegFrmDel(Tln)	((Tln) << FShft (LCCR2_BFW))
+
+#define LCCR3_API	(0xf << 16)	/* AC Bias pin trasitions per interrupt */
+#define LCCR3_API_S	16
+#define LCCR3_VSP	(1 << 20)	/* vertical sync polarity */
+#define LCCR3_HSP	(1 << 21)	/* horizontal sync polarity */
+#define LCCR3_PCP	(1 << 22)	/* Pixel Clock Polarity (L_PCLK) */
+#define LCCR3_PixRsEdg	(LCCR3_PCP*0)	/*  Pixel clock Rising-Edge */
+#define LCCR3_PixFlEdg	(LCCR3_PCP*1)	/*  Pixel clock Falling-Edge */
+
+#define LCCR3_OEP	(1 << 23)	/* Output Enable Polarity */
+#define LCCR3_OutEnH	(LCCR3_OEP*0)	/*  Output Enable active High */
+#define LCCR3_OutEnL	(LCCR3_OEP*1)	/*  Output Enable active Low */
+
+#define LCCR3_DPC	(1 << 27)	/* double pixel clock mode */
+#define LCCR3_PCD	Fld (8, 0)	/* Pixel Clock Divisor */
+#define LCCR3_PixClkDiv(Div)	(((Div) << FShft (LCCR3_PCD)))
+
+#define LCCR3_BPP	Fld (3, 24)	/* Bit Per Pixel */
+#define LCCR3_Bpp(Bpp)	(((Bpp) << FShft (LCCR3_BPP)))
+
+#define LCCR3_ACB	Fld (8, 8)	/* AC Bias */
+#define LCCR3_Acb(Acb)	(((Acb) << FShft (LCCR3_ACB)))
+
+#define LCCR3_HorSnchH	(LCCR3_HSP*0)	/*  HSP Active High */
+#define LCCR3_HorSnchL	(LCCR3_HSP*1)	/*  HSP Active Low */
+
+#define LCCR3_VrtSnchH	(LCCR3_VSP*0)	/*  VSP Active High */
+#define LCCR3_VrtSnchL	(LCCR3_VSP*1)	/*  VSP Active Low */
+
+#define LCCR5_IUM(x)	(1 << ((x) + 23)) /* input underrun mask */
+#define LCCR5_BSM(x)	(1 << ((x) + 15)) /* branch mask */
+#define LCCR5_EOFM(x)	(1 << ((x) + 7))  /* end of frame mask */
+#define LCCR5_SOFM(x)	(1 << ((x) + 0))  /* start of frame mask */
+
+#define LCSR_LDD	(1 << 0)	/* LCD Disable Done */
+#define LCSR_SOF	(1 << 1)	/* Start of frame */
+#define LCSR_BER	(1 << 2)	/* Bus error */
+#define LCSR_ABC	(1 << 3)	/* AC Bias count */
+#define LCSR_IUL	(1 << 4)	/* input FIFO underrun Lower panel */
+#define LCSR_IUU	(1 << 5)	/* input FIFO underrun Upper panel */
+#define LCSR_OU		(1 << 6)	/* output FIFO underrun */
+#define LCSR_QD		(1 << 7)	/* quick disable */
+#define LCSR_EOF	(1 << 8)	/* end of frame */
+#define LCSR_BS		(1 << 9)	/* branch status */
+#define LCSR_SINT	(1 << 10)	/* subsequent interrupt */
+#define LCSR_RD_ST	(1 << 11)	/* read status */
+#define LCSR_CMD_INT	(1 << 12)	/* command interrupt */
+
+#define LDCMD_PAL	(1 << 26)	/* instructs DMA to load palette buffer */
+
+/* smartpanel related */
+#define PRSR_DATA(x)	((x) & 0xff)	/* Panel Data */
+#define PRSR_A0		(1 << 8)	/* Read Data Source */
+#define PRSR_ST_OK	(1 << 9)	/* Status OK */
+#define PRSR_CON_NT	(1 << 10)	/* Continue to Next Command */
+
+#define SMART_CMD_A0			 (0x1 << 8)
+#define SMART_CMD_READ_STATUS_REG	 (0x0 << 9)
+#define SMART_CMD_READ_FRAME_BUFFER	((0x0 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_COMMAND		 (0x1 << 9)
+#define SMART_CMD_WRITE_DATA		((0x1 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WRITE_FRAME		((0x2 << 9) | SMART_CMD_A0)
+#define SMART_CMD_WAIT_FOR_VSYNC	 (0x3 << 9)
+#define SMART_CMD_NOOP			 (0x4 << 9)
+#define SMART_CMD_INTERRUPT		 (0x5 << 9)
+
+#define SMART_CMD(x)	(SMART_CMD_WRITE_COMMAND | ((x) & 0xff))
+#define SMART_DAT(x)	(SMART_CMD_WRITE_DATA | ((x) & 0xff))
+#endif /* __ASM_ARCH_REGS_LCD_H */
diff --git a/arch/arm/mach-pxa/include/mach/regs-ssp.h b/arch/arm/mach-pxa/include/mach/regs-ssp.h
new file mode 100644
index 0000000..3c04cde
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-ssp.h
@@ -0,0 +1,127 @@
+#ifndef __ASM_ARCH_REGS_SSP_H
+#define __ASM_ARCH_REGS_SSP_H
+
+/*
+ * SSP Serial Port Registers
+ * PXA250, PXA255, PXA26x and PXA27x SSP controllers are all slightly different.
+ * PXA255, PXA26x and PXA27x have extra ports, registers and bits.
+ */
+
+#define SSCR0		(0x00)  /* SSP Control Register 0 */
+#define SSCR1		(0x04)  /* SSP Control Register 1 */
+#define SSSR		(0x08)  /* SSP Status Register */
+#define SSITR		(0x0C)  /* SSP Interrupt Test Register */
+#define SSDR		(0x10)  /* SSP Data Write/Data Read Register */
+
+#define SSTO		(0x28)  /* SSP Time Out Register */
+#define SSPSP		(0x2C)  /* SSP Programmable Serial Protocol */
+#define SSTSA		(0x30)  /* SSP Tx Timeslot Active */
+#define SSRSA		(0x34)  /* SSP Rx Timeslot Active */
+#define SSTSS		(0x38)  /* SSP Timeslot Status */
+#define SSACD		(0x3C)  /* SSP Audio Clock Divider */
+
+#if defined(CONFIG_PXA3xx)
+#define SSACDD		(0x40)	/* SSP Audio Clock Dither Divider */
+#endif
+
+/* Common PXA2xx bits first */
+#define SSCR0_DSS	(0x0000000f)	/* Data Size Select (mask) */
+#define SSCR0_DataSize(x)  ((x) - 1)	/* Data Size Select [4..16] */
+#define SSCR0_FRF	(0x00000030)	/* FRame Format (mask) */
+#define SSCR0_Motorola	(0x0 << 4)	/* Motorola's Serial Peripheral Interface (SPI) */
+#define SSCR0_TI	(0x1 << 4)	/* Texas Instruments' Synchronous Serial Protocol (SSP) */
+#define SSCR0_National	(0x2 << 4)	/* National Microwire */
+#define SSCR0_ECS	(1 << 6)	/* External clock select */
+#define SSCR0_SSE	(1 << 7)	/* Synchronous Serial Port Enable */
+
+#if defined(CONFIG_PXA25x)
+#define SSCR0_SCR	(0x0000ff00)	/* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) ((((x) - 2)/2) << 8) /* Divisor [2..512] */
+
+#elif defined(CONFIG_PXA27x) || defined(CONFIG_PXA3xx)
+#define SSCR0_SCR	(0x000fff00)	/* Serial Clock Rate (mask) */
+#define SSCR0_SerClkDiv(x) (((x) - 1) << 8) /* Divisor [1..4096] */
+#define SSCR0_EDSS	(1 << 20)	/* Extended data size select */
+#define SSCR0_NCS	(1 << 21)	/* Network clock select */
+#define SSCR0_RIM	(1 << 22)	/* Receive FIFO overrrun interrupt mask */
+#define SSCR0_TUM	(1 << 23)	/* Transmit FIFO underrun interrupt mask */
+#define SSCR0_FRDC	(0x07000000)	/* Frame rate divider control (mask) */
+#define SSCR0_SlotsPerFrm(x) (((x) - 1) << 24)	/* Time slots per frame [1..8] */
+#define SSCR0_ADC	(1 << 30)	/* Audio clock select */
+#define SSCR0_MOD	(1 << 31)	/* Mode (normal or network) */
+#endif
+
+#if defined(CONFIG_PXA3xx)
+#define SSCR0_FPCKE	(1 << 29)	/* FIFO packing enable */
+#endif
+
+#define SSCR1_RIE	(1 << 0)	/* Receive FIFO Interrupt Enable */
+#define SSCR1_TIE	(1 << 1)	/* Transmit FIFO Interrupt Enable */
+#define SSCR1_LBM	(1 << 2)	/* Loop-Back Mode */
+#define SSCR1_SPO	(1 << 3)	/* Motorola SPI SSPSCLK polarity setting */
+#define SSCR1_SPH	(1 << 4)	/* Motorola SPI SSPSCLK phase setting */
+#define SSCR1_MWDS	(1 << 5)	/* Microwire Transmit Data Size */
+#define SSCR1_TFT	(0x000003c0)	/* Transmit FIFO Threshold (mask) */
+#define SSCR1_TxTresh(x) (((x) - 1) << 6) /* level [1..16] */
+#define SSCR1_RFT	(0x00003c00)	/* Receive FIFO Threshold (mask) */
+#define SSCR1_RxTresh(x) (((x) - 1) << 10) /* level [1..16] */
+
+#define SSSR_TNF	(1 << 2)	/* Transmit FIFO Not Full */
+#define SSSR_RNE	(1 << 3)	/* Receive FIFO Not Empty */
+#define SSSR_BSY	(1 << 4)	/* SSP Busy */
+#define SSSR_TFS	(1 << 5)	/* Transmit FIFO Service Request */
+#define SSSR_RFS	(1 << 6)	/* Receive FIFO Service Request */
+#define SSSR_ROR	(1 << 7)	/* Receive FIFO Overrun */
+
+#define SSCR0_TIM		(1 << 23)	/* Transmit FIFO Under Run Interrupt Mask */
+#define SSCR0_RIM		(1 << 22)	/* Receive FIFO Over Run interrupt Mask */
+#define SSCR0_NCS		(1 << 21)	/* Network Clock Select */
+#define SSCR0_EDSS		(1 << 20)	/* Extended Data Size Select */
+
+/* extra bits in PXA255, PXA26x and PXA27x SSP ports */
+#define SSCR0_TISSP		(1 << 4)	/* TI Sync Serial Protocol */
+#define SSCR0_PSP		(3 << 4)	/* PSP - Programmable Serial Protocol */
+#define SSCR1_TTELP		(1 << 31)	/* TXD Tristate Enable Last Phase */
+#define SSCR1_TTE		(1 << 30)	/* TXD Tristate Enable */
+#define SSCR1_EBCEI		(1 << 29)	/* Enable Bit Count Error interrupt */
+#define SSCR1_SCFR		(1 << 28)	/* Slave Clock free Running */
+#define SSCR1_ECRA		(1 << 27)	/* Enable Clock Request A */
+#define SSCR1_ECRB		(1 << 26)	/* Enable Clock request B */
+#define SSCR1_SCLKDIR		(1 << 25)	/* Serial Bit Rate Clock Direction */
+#define SSCR1_SFRMDIR		(1 << 24)	/* Frame Direction */
+#define SSCR1_RWOT		(1 << 23)	/* Receive Without Transmit */
+#define SSCR1_TRAIL		(1 << 22)	/* Trailing Byte */
+#define SSCR1_TSRE		(1 << 21)	/* Transmit Service Request Enable */
+#define SSCR1_RSRE		(1 << 20)	/* Receive Service Request Enable */
+#define SSCR1_TINTE		(1 << 19)	/* Receiver Time-out Interrupt enable */
+#define SSCR1_PINTE		(1 << 18)	/* Peripheral Trailing Byte Interupt Enable */
+#define SSCR1_IFS		(1 << 16)	/* Invert Frame Signal */
+#define SSCR1_STRF		(1 << 15)	/* Select FIFO or EFWR */
+#define SSCR1_EFWR		(1 << 14)	/* Enable FIFO Write/Read */
+
+#define SSSR_BCE		(1 << 23)	/* Bit Count Error */
+#define SSSR_CSS		(1 << 22)	/* Clock Synchronisation Status */
+#define SSSR_TUR		(1 << 21)	/* Transmit FIFO Under Run */
+#define SSSR_EOC		(1 << 20)	/* End Of Chain */
+#define SSSR_TINT		(1 << 19)	/* Receiver Time-out Interrupt */
+#define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
+
+#define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
+#define SSPSP_ETDS		(1 << 3)	/* End of Transfer data State */
+#define SSPSP_SFRMP		(1 << 2)	/* Serial Frame Polarity */
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
+
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
+#if defined(CONFIG_PXA3xx)
+#define SSACD_SCDX8		(1 << 7)	/* SYSCLK division ratio select */
+#endif
+
+
+#endif /* __ASM_ARCH_REGS_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/reset.h b/arch/arm/mach-pxa/include/mach/reset.h
new file mode 100644
index 0000000..7b8842c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/reset.h
@@ -0,0 +1,21 @@
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H
+
+#define RESET_STATUS_HARDWARE	(1 << 0)	/* Hardware Reset */
+#define RESET_STATUS_WATCHDOG	(1 << 1)	/* Watchdog Reset */
+#define RESET_STATUS_LOWPOWER	(1 << 2)	/* Low Power/Sleep Exit */
+#define RESET_STATUS_GPIO	(1 << 3)	/* GPIO Reset */
+#define RESET_STATUS_ALL	(0xf)
+
+extern unsigned int reset_status;
+extern void clear_reset_status(unsigned int mask);
+
+/**
+ * init_gpio_reset() - register GPIO as reset generator
+ *
+ * @gpio - gpio nr
+ * @output - set gpio as out/low instead of input during normal work
+ */
+extern int init_gpio_reset(int gpio, int output);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/arch/arm/mach-pxa/include/mach/sharpsl.h b/arch/arm/mach-pxa/include/mach/sharpsl.h
new file mode 100644
index 0000000..3b1d4a7
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/sharpsl.h
@@ -0,0 +1,34 @@
+/*
+ * SharpSL SSP Driver
+ */
+
+unsigned long corgi_ssp_ads7846_putget(unsigned long);
+unsigned long corgi_ssp_ads7846_get(void);
+void corgi_ssp_ads7846_put(unsigned long data);
+void corgi_ssp_ads7846_lock(void);
+void corgi_ssp_ads7846_unlock(void);
+void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
+void corgi_ssp_blduty_set(int duty);
+int corgi_ssp_max1111_get(unsigned long data);
+
+/*
+ * SharpSL Touchscreen Driver
+ */
+
+struct corgits_machinfo {
+	unsigned long (*get_hsync_invperiod)(void);
+	void (*put_hsync)(void);
+	void (*wait_hsync)(void);
+};
+
+
+/*
+ * SharpSL Backlight
+ */
+extern void corgibl_limit_intensity(int limit);
+
+
+/*
+ * SharpSL Battery/PM Driver
+ */
+extern void sharpsl_battery_kick(void);
diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h
new file mode 100644
index 0000000..31ac26b
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/spitz.h
@@ -0,0 +1,190 @@
+/*
+ * Hardware specific definitions for SL-Cx000 series of PDAs
+ *
+ * Copyright (c) 2005 Alexander Wykes
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_SPITZ_H
+#define __ASM_ARCH_SPITZ_H  1
+#endif
+
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+/* Spitz/Akita GPIOs */
+
+#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
+#define SPITZ_GPIO_RESET           (1)
+#define SPITZ_GPIO_nSD_DETECT      (9)
+#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
+#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
+#define SPITZ_GPIO_ADS7846_CS      (14)
+#define SPITZ_GPIO_SYNC            (16)
+#define SPITZ_GPIO_MAX1111_CS      (20)
+#define SPITZ_GPIO_FATAL_BAT       (21)
+#define SPITZ_GPIO_HSYNC           (22)
+#define SPITZ_GPIO_nSD_CLK         (32)
+#define SPITZ_GPIO_USB_DEVICE      (35)
+#define SPITZ_GPIO_USB_HOST        (37)
+#define SPITZ_GPIO_USB_CONNECT     (41)
+#define SPITZ_GPIO_LCDCON_CS       (53)
+#define SPITZ_GPIO_nPCE            (54)
+#define SPITZ_GPIO_nSD_WP          (81)
+#define SPITZ_GPIO_ON_RESET        (89)
+#define SPITZ_GPIO_BAT_COVER       (90)
+#define SPITZ_GPIO_CF_CD           (94)
+#define SPITZ_GPIO_ON_KEY          (95)
+#define SPITZ_GPIO_SWA             (97)
+#define SPITZ_GPIO_SWB             (96)
+#define SPITZ_GPIO_CHRG_FULL       (101)
+#define SPITZ_GPIO_CO              (101)
+#define SPITZ_GPIO_CF_IRQ          (105)
+#define SPITZ_GPIO_AC_IN           (115)
+#define SPITZ_GPIO_HP_IN           (116)
+
+/* Spitz Only GPIOs */
+
+#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
+#define SPITZ_GPIO_CF2_CD          (93)
+
+
+/* Spitz/Akita Keyboard Definitions */
+
+#define SPITZ_KEY_STROBE_NUM         (11)
+#define SPITZ_KEY_SENSE_NUM          (7)
+#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
+
+#define SPITZ_GPIO_KEY_STROBE0       88
+#define SPITZ_GPIO_KEY_STROBE1       23
+#define SPITZ_GPIO_KEY_STROBE2       24
+#define SPITZ_GPIO_KEY_STROBE3       25
+#define SPITZ_GPIO_KEY_STROBE4       26
+#define SPITZ_GPIO_KEY_STROBE5       27
+#define SPITZ_GPIO_KEY_STROBE6       52
+#define SPITZ_GPIO_KEY_STROBE7       103
+#define SPITZ_GPIO_KEY_STROBE8       107
+#define SPITZ_GPIO_KEY_STROBE9       108
+#define SPITZ_GPIO_KEY_STROBE10      114
+
+#define SPITZ_GPIO_KEY_SENSE0        12
+#define SPITZ_GPIO_KEY_SENSE1        17
+#define SPITZ_GPIO_KEY_SENSE2        91
+#define SPITZ_GPIO_KEY_SENSE3        34
+#define SPITZ_GPIO_KEY_SENSE4        36
+#define SPITZ_GPIO_KEY_SENSE5        38
+#define SPITZ_GPIO_KEY_SENSE6        39
+
+
+/* Spitz Scoop Device (No. 1) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
+#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
+#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
+#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
+#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | \
+                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_SUS_SET     0
+
+#define SPITZ_SCP_GPIO_BASE	(NR_BUILTIN_GPIO)
+#define SPITZ_GPIO_LED_GREEN	(SPITZ_SCP_GPIO_BASE + 0)
+#define SPITZ_GPIO_JK_B		(SPITZ_SCP_GPIO_BASE + 1)
+#define SPITZ_GPIO_CHRG_ON	(SPITZ_SCP_GPIO_BASE + 2)
+#define SPITZ_GPIO_MUTE_L	(SPITZ_SCP_GPIO_BASE + 3)
+#define SPITZ_GPIO_MUTE_R	(SPITZ_SCP_GPIO_BASE + 4)
+#define SPITZ_GPIO_CF_POWER	(SPITZ_SCP_GPIO_BASE + 5)
+#define SPITZ_GPIO_LED_ORANGE	(SPITZ_SCP_GPIO_BASE + 6)
+#define SPITZ_GPIO_JK_A		(SPITZ_SCP_GPIO_BASE + 7)
+#define SPITZ_GPIO_ADC_TEMP_ON	(SPITZ_SCP_GPIO_BASE + 8)
+
+/* Spitz Scoop Device (No. 2) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
+#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
+#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+
+#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+
+#define SPITZ_SCP2_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define SPITZ_GPIO_IR_ON		(SPITZ_SCP2_GPIO_BASE + 0)
+#define SPITZ_GPIO_AKIN_PULLUP		(SPITZ_SCP2_GPIO_BASE + 1
+#define SPITZ_GPIO_RESERVED_1		(SPITZ_SCP2_GPIO_BASE + 2)
+#define SPITZ_GPIO_RESERVED_2		(SPITZ_SCP2_GPIO_BASE + 3)
+#define SPITZ_GPIO_RESERVED_3		(SPITZ_SCP2_GPIO_BASE + 4)
+#define SPITZ_GPIO_RESERVED_4		(SPITZ_SCP2_GPIO_BASE + 5)
+#define SPITZ_GPIO_BACKLIGHT_CONT	(SPITZ_SCP2_GPIO_BASE + 6)
+#define SPITZ_GPIO_BACKLIGHT_ON		(SPITZ_SCP2_GPIO_BASE + 7)
+#define SPITZ_GPIO_MIC_BIAS		(SPITZ_SCP2_GPIO_BASE + 8)
+
+/* Akita IO Expander GPIOs */
+#define AKITA_IOEXP_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define AKITA_GPIO_RESERVED_0		(AKITA_IOEXP_GPIO_BASE + 0)
+#define AKITA_GPIO_RESERVED_1		(AKITA_IOEXP_GPIO_BASE + 1)
+#define AKITA_GPIO_MIC_BIAS		(AKITA_IOEXP_GPIO_BASE + 2)
+#define AKITA_GPIO_BACKLIGHT_ON		(AKITA_IOEXP_GPIO_BASE + 3)
+#define AKITA_GPIO_BACKLIGHT_CONT	(AKITA_IOEXP_GPIO_BASE + 4)
+#define AKITA_GPIO_AKIN_PULLUP		(AKITA_IOEXP_GPIO_BASE + 5)
+#define AKITA_GPIO_IR_ON		(AKITA_IOEXP_GPIO_BASE + 6)
+#define AKITA_GPIO_RESERVED_7		(AKITA_IOEXP_GPIO_BASE + 7)
+
+/* Spitz IRQ Definitions */
+
+#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzscoop_device;
+extern struct platform_device spitzscoop2_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
diff --git a/arch/arm/mach-pxa/include/mach/ssp.h b/arch/arm/mach-pxa/include/mach/ssp.h
new file mode 100644
index 0000000..cb5cb76
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/ssp.h
@@ -0,0 +1,107 @@
+/*
+ *  ssp.h
+ *
+ *  Copyright (C) 2003 Russell King, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This driver supports the following PXA CPU/SSP ports:-
+ *
+ *       PXA250     SSP
+ *       PXA255     SSP, NSSP
+ *       PXA26x     SSP, NSSP, ASSP
+ *       PXA27x     SSP1, SSP2, SSP3
+ *       PXA3xx     SSP1, SSP2, SSP3, SSP4
+ */
+
+#ifndef __ASM_ARCH_SSP_H
+#define __ASM_ARCH_SSP_H
+
+#include <linux/list.h>
+#include <linux/io.h>
+
+enum pxa_ssp_type {
+	SSP_UNDEFINED = 0,
+	PXA25x_SSP,  /* pxa 210, 250, 255, 26x */
+	PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
+	PXA27x_SSP,
+};
+
+struct ssp_device {
+	struct platform_device *pdev;
+	struct list_head	node;
+
+	struct clk	*clk;
+	void __iomem	*mmio_base;
+	unsigned long	phys_base;
+
+	const char	*label;
+	int		port_id;
+	int		type;
+	int		use_count;
+	int		irq;
+	int		drcmr_rx;
+	int		drcmr_tx;
+};
+
+/*
+ * SSP initialisation flags
+ */
+#define SSP_NO_IRQ	0x1		/* don't register an irq handler in SSP driver */
+
+struct ssp_state {
+	u32	cr0;
+	u32 cr1;
+	u32 to;
+	u32 psp;
+};
+
+struct ssp_dev {
+	struct ssp_device *ssp;
+	u32 port;
+	u32 mode;
+	u32 flags;
+	u32 psp_flags;
+	u32 speed;
+	int irq;
+};
+
+int ssp_write_word(struct ssp_dev *dev, u32 data);
+int ssp_read_word(struct ssp_dev *dev, u32 *data);
+int ssp_flush(struct ssp_dev *dev);
+void ssp_enable(struct ssp_dev *dev);
+void ssp_disable(struct ssp_dev *dev);
+void ssp_save_state(struct ssp_dev *dev, struct ssp_state *ssp);
+void ssp_restore_state(struct ssp_dev *dev, struct ssp_state *ssp);
+int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags);
+int ssp_config(struct ssp_dev *dev, u32 mode, u32 flags, u32 psp_flags, u32 speed);
+void ssp_exit(struct ssp_dev *dev);
+
+/**
+ * ssp_write_reg - Write to a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to write to
+ * @val: Value to be written.
+ */
+static inline void ssp_write_reg(struct ssp_device *dev, u32 reg, u32 val)
+{
+	__raw_writel(val, dev->mmio_base + reg);
+}
+
+/**
+ * ssp_read_reg - Read from a SSP register
+ *
+ * @dev: SSP device to access
+ * @reg: Register to read from
+ */
+static inline u32 ssp_read_reg(struct ssp_device *dev, u32 reg)
+{
+	return __raw_readl(dev->mmio_base + reg);
+}
+
+struct ssp_device *ssp_request(int port, const char *label);
+void ssp_free(struct ssp_device *);
+#endif /* __ASM_ARCH_SSP_H */
diff --git a/arch/arm/mach-pxa/include/mach/system.h b/arch/arm/mach-pxa/include/mach/system.h
new file mode 100644
index 0000000..0f381e6
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/system.h
@@ -0,0 +1,24 @@
+/*
+ * arch/arm/mach-pxa/include/mach/system.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <asm/proc-fns.h>
+#include "hardware.h"
+#include "pxa2xx-regs.h"
+#include "pxa-regs.h"
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+
+void arch_reset(char mode);
diff --git a/arch/arm/mach-pxa/include/mach/timex.h b/arch/arm/mach-pxa/include/mach/timex.h
new file mode 100644
index 0000000..b05fc66
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/timex.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-pxa/include/mach/timex.h
+ *
+ * Author:	Nicolas Pitre
+ * Created:	Jun 15, 2001
+ * Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+
+#if defined(CONFIG_PXA25x)
+/* PXA250/210 timer base */
+#define CLOCK_TICK_RATE 3686400
+#elif defined(CONFIG_PXA27x)
+/* PXA27x timer base */
+#ifdef CONFIG_MACH_MAINSTONE
+#define CLOCK_TICK_RATE 3249600
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
+#else
+#define CLOCK_TICK_RATE 3250000
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/tosa.h b/arch/arm/mach-pxa/include/mach/tosa.h
new file mode 100644
index 0000000..a72803f
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa.h
@@ -0,0 +1,198 @@
+/*
+ * Hardware specific definitions for Sharp SL-C6000x series of PDAs
+ *
+ * Copyright (c) 2005 Dirk Opfer
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef _ASM_ARCH_TOSA_H_
+#define _ASM_ARCH_TOSA_H_ 1
+
+/*  TOSA Chip selects  */
+#define TOSA_LCDC_PHYS		PXA_CS4_PHYS
+/* Internel Scoop */
+#define TOSA_CF_PHYS		(PXA_CS2_PHYS + 0x00800000)
+/* Jacket Scoop */
+#define TOSA_SCOOP_PHYS  	(PXA_CS5_PHYS + 0x00800000)
+
+/*
+ * SCOOP2 internal GPIOs
+ */
+#define TOSA_SCOOP_GPIO_BASE		NR_BUILTIN_GPIO
+#define TOSA_SCOOP_PXA_VCORE1		SCOOP_GPCR_PA11
+#define TOSA_GPIO_TC6393XB_REST_IN	(TOSA_SCOOP_GPIO_BASE + 1)
+#define TOSA_GPIO_IR_POWERDWN		(TOSA_SCOOP_GPIO_BASE + 2)
+#define TOSA_GPIO_SD_WP			(TOSA_SCOOP_GPIO_BASE + 3)
+#define TOSA_GPIO_PWR_ON		(TOSA_SCOOP_GPIO_BASE + 4)
+#define TOSA_SCOOP_AUD_PWR_ON		SCOOP_GPCR_PA16
+#define TOSA_GPIO_BT_RESET		(TOSA_SCOOP_GPIO_BASE + 6)
+#define TOSA_GPIO_BT_PWR_EN		(TOSA_SCOOP_GPIO_BASE + 7)
+#define TOSA_SCOOP_AC_IN_OL		SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_IO_DIR     (TOSA_SCOOP_PXA_VCORE1 | \
+		TOSA_SCOOP_AUD_PWR_ON)
+
+/*
+ * SCOOP2 jacket GPIOs
+ */
+#define TOSA_SCOOP_JC_GPIO_BASE		(NR_BUILTIN_GPIO + 12)
+#define TOSA_GPIO_BT_LED		(TOSA_SCOOP_JC_GPIO_BASE + 0)
+#define TOSA_GPIO_NOTE_LED		(TOSA_SCOOP_JC_GPIO_BASE + 1)
+#define TOSA_GPIO_CHRG_ERR_LED		(TOSA_SCOOP_JC_GPIO_BASE + 2)
+#define TOSA_GPIO_USB_PULLUP		(TOSA_SCOOP_JC_GPIO_BASE + 3)
+#define TOSA_GPIO_TC6393XB_SUSPEND	(TOSA_SCOOP_JC_GPIO_BASE + 4)
+#define TOSA_GPIO_TC6393XB_L3V_ON	(TOSA_SCOOP_JC_GPIO_BASE + 5)
+#define TOSA_SCOOP_JC_WLAN_DETECT	SCOOP_GPCR_PA17
+#define TOSA_GPIO_WLAN_LED		(TOSA_SCOOP_JC_GPIO_BASE + 7)
+#define TOSA_SCOOP_JC_CARD_LIMIT_SEL	SCOOP_GPCR_PA19
+
+/* GPIO Direction   1 : output mode / 0:input mode */
+#define TOSA_SCOOP_JC_IO_DIR (TOSA_SCOOP_JC_CARD_LIMIT_SEL)
+
+/*
+ * TC6393XB GPIOs
+ */
+#define TOSA_TC6393XB_GPIO_BASE		(NR_BUILTIN_GPIO + 2 * 12)
+#define TOSA_TC6393XB_GPIO(i)		(TOSA_TC6393XB_GPIO_BASE + (i))
+#define TOSA_TC6393XB_GPIO_BIT(gpio)	(1 << (gpio - TOSA_TC6393XB_GPIO_BASE))
+
+#define TOSA_GPIO_TG_ON			(TOSA_TC6393XB_GPIO_BASE + 0)
+#define TOSA_GPIO_L_MUTE		(TOSA_TC6393XB_GPIO_BASE + 1)
+#define TOSA_GPIO_BL_C20MA		(TOSA_TC6393XB_GPIO_BASE + 3)
+#define TOSA_GPIO_CARD_VCC_ON		(TOSA_TC6393XB_GPIO_BASE + 4)
+#define TOSA_GPIO_CHARGE_OFF		(TOSA_TC6393XB_GPIO_BASE + 6)
+#define TOSA_GPIO_CHARGE_OFF_JC		(TOSA_TC6393XB_GPIO_BASE + 7)
+#define TOSA_GPIO_BAT0_V_ON		(TOSA_TC6393XB_GPIO_BASE + 9)
+#define TOSA_GPIO_BAT1_V_ON		(TOSA_TC6393XB_GPIO_BASE + 10)
+#define TOSA_GPIO_BU_CHRG_ON		(TOSA_TC6393XB_GPIO_BASE + 11)
+#define TOSA_GPIO_BAT_SW_ON		(TOSA_TC6393XB_GPIO_BASE + 12)
+#define TOSA_GPIO_BAT0_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 14)
+#define TOSA_GPIO_BAT1_TH_ON		(TOSA_TC6393XB_GPIO_BASE + 15)
+
+/*
+ * Timing Generator
+ */
+#define TG_PNLCTL 			0x00
+#define TG_TPOSCTL 			0x01
+#define TG_DUTYCTL 			0x02
+#define TG_GPOSR 			0x03
+#define TG_GPODR1 			0x04
+#define TG_GPODR2 			0x05
+#define TG_PINICTL 			0x06
+#define TG_HPOSCTL 			0x07
+
+/*
+ * PXA GPIOs
+ */
+#define TOSA_GPIO_POWERON		(0)
+#define TOSA_GPIO_RESET			(1)
+#define TOSA_GPIO_AC_IN			(2)
+#define TOSA_GPIO_RECORD_BTN		(3)
+#define TOSA_GPIO_SYNC			(4)	/* Cradle SYNC Button */
+#define TOSA_GPIO_USB_IN		(5)
+#define TOSA_GPIO_JACKET_DETECT		(7)
+#define TOSA_GPIO_nSD_DETECT		(9)
+#define TOSA_GPIO_nSD_INT		(10)
+#define TOSA_GPIO_TC6393XB_CLK		(11)
+#define TOSA_GPIO_BAT1_CRG		(12)
+#define TOSA_GPIO_CF_CD			(13)
+#define TOSA_GPIO_BAT0_CRG		(14)
+#define TOSA_GPIO_TC6393XB_INT		(15)
+#define TOSA_GPIO_BAT0_LOW		(17)
+#define TOSA_GPIO_TC6393XB_RDY		(18)
+#define TOSA_GPIO_ON_RESET		(19)
+#define TOSA_GPIO_EAR_IN		(20)
+#define TOSA_GPIO_CF_IRQ		(21)	/* CF slot0 Ready */
+#define TOSA_GPIO_ON_KEY		(22)
+#define TOSA_GPIO_VGA_LINE		(27)
+#define TOSA_GPIO_TP_INT		(32)	/* Touch Panel pen down interrupt */
+#define TOSA_GPIO_JC_CF_IRQ		(36)	/* CF slot1 Ready */
+#define TOSA_GPIO_BAT_LOCKED		(38)	/* Battery locked */
+#define TOSA_GPIO_IRDA_TX		(47)
+#define TOSA_GPIO_TG_SPI_SCLK		(81)
+#define TOSA_GPIO_TG_SPI_CS		(82)
+#define TOSA_GPIO_TG_SPI_MOSI		(83)
+#define TOSA_GPIO_BAT1_LOW		(84)
+
+#define TOSA_GPIO_HP_IN			GPIO_EAR_IN
+
+#define TOSA_GPIO_MAIN_BAT_LOW		GPIO_BAT0_LOW
+
+#define TOSA_KEY_STROBE_NUM		(11)
+#define TOSA_KEY_SENSE_NUM		(7)
+
+#define TOSA_GPIO_HIGH_STROBE_BIT	(0xfc000000)
+#define TOSA_GPIO_LOW_STROBE_BIT	(0x0000001f)
+#define TOSA_GPIO_ALL_SENSE_BIT		(0x00000fe0)
+#define TOSA_GPIO_ALL_SENSE_RSHIFT	(5)
+#define TOSA_GPIO_STROBE_BIT(a)		GPIO_bit(58+(a))
+#define TOSA_GPIO_SENSE_BIT(a)		GPIO_bit(69+(a))
+#define TOSA_GAFR_HIGH_STROBE_BIT	(0xfff00000)
+#define TOSA_GAFR_LOW_STROBE_BIT	(0x000003ff)
+#define TOSA_GAFR_ALL_SENSE_BIT		(0x00fffc00)
+#define TOSA_GPIO_KEY_SENSE(a) 		(69+(a))
+#define TOSA_GPIO_KEY_STROBE(a)		(58+(a))
+
+/*
+ * Interrupts
+ */
+#define TOSA_IRQ_GPIO_WAKEUP        	IRQ_GPIO(TOSA_GPIO_WAKEUP)
+#define TOSA_IRQ_GPIO_AC_IN         	IRQ_GPIO(TOSA_GPIO_AC_IN)
+#define TOSA_IRQ_GPIO_RECORD_BTN    	IRQ_GPIO(TOSA_GPIO_RECORD_BTN)
+#define TOSA_IRQ_GPIO_SYNC          	IRQ_GPIO(TOSA_GPIO_SYNC)
+#define TOSA_IRQ_GPIO_USB_IN        	IRQ_GPIO(TOSA_GPIO_USB_IN)
+#define TOSA_IRQ_GPIO_JACKET_DETECT 	IRQ_GPIO(TOSA_GPIO_JACKET_DETECT)
+#define TOSA_IRQ_GPIO_nSD_INT       	IRQ_GPIO(TOSA_GPIO_nSD_INT)
+#define TOSA_IRQ_GPIO_nSD_DETECT    	IRQ_GPIO(TOSA_GPIO_nSD_DETECT)
+#define TOSA_IRQ_GPIO_BAT1_CRG      	IRQ_GPIO(TOSA_GPIO_BAT1_CRG)
+#define TOSA_IRQ_GPIO_CF_CD         	IRQ_GPIO(TOSA_GPIO_CF_CD)
+#define TOSA_IRQ_GPIO_BAT0_CRG      	IRQ_GPIO(TOSA_GPIO_BAT0_CRG)
+#define TOSA_IRQ_GPIO_TC6393XB_INT    	IRQ_GPIO(TOSA_GPIO_TC6393XB_INT)
+#define TOSA_IRQ_GPIO_BAT0_LOW      	IRQ_GPIO(TOSA_GPIO_BAT0_LOW)
+#define TOSA_IRQ_GPIO_EAR_IN        	IRQ_GPIO(TOSA_GPIO_EAR_IN)
+#define TOSA_IRQ_GPIO_CF_IRQ        	IRQ_GPIO(TOSA_GPIO_CF_IRQ)
+#define TOSA_IRQ_GPIO_ON_KEY        	IRQ_GPIO(TOSA_GPIO_ON_KEY)
+#define TOSA_IRQ_GPIO_VGA_LINE      	IRQ_GPIO(TOSA_GPIO_VGA_LINE)
+#define TOSA_IRQ_GPIO_TP_INT        	IRQ_GPIO(TOSA_GPIO_TP_INT)
+#define TOSA_IRQ_GPIO_JC_CF_IRQ     	IRQ_GPIO(TOSA_GPIO_JC_CF_IRQ)
+#define TOSA_IRQ_GPIO_BAT_LOCKED    	IRQ_GPIO(TOSA_GPIO_BAT_LOCKED)
+#define TOSA_IRQ_GPIO_BAT1_LOW      	IRQ_GPIO(TOSA_GPIO_BAT1_LOW)
+#define TOSA_IRQ_GPIO_KEY_SENSE(a)  	IRQ_GPIO(69+(a))
+
+#define TOSA_IRQ_GPIO_MAIN_BAT_LOW 	IRQ_GPIO(TOSA_GPIO_MAIN_BAT_LOW)
+
+#define TOSA_KEY_SYNC		KEY_102ND /* ??? */
+
+#ifndef CONFIG_KEYBOARD_TOSA_USE_EXT_KEYCODES
+#define TOSA_KEY_RECORD		KEY_YEN
+#define TOSA_KEY_ADDRESSBOOK	KEY_KATAKANA
+#define TOSA_KEY_CANCEL		KEY_ESC
+#define TOSA_KEY_CENTER		KEY_HIRAGANA
+#define TOSA_KEY_OK		KEY_HENKAN
+#define TOSA_KEY_CALENDAR	KEY_KATAKANAHIRAGANA
+#define TOSA_KEY_HOMEPAGE	KEY_HANGEUL
+#define TOSA_KEY_LIGHT		KEY_MUHENKAN
+#define TOSA_KEY_MENU		KEY_HANJA
+#define TOSA_KEY_FN		KEY_RIGHTALT
+#define TOSA_KEY_MAIL		KEY_ZENKAKUHANKAKU
+#else
+#define TOSA_KEY_RECORD		KEY_RECORD
+#define TOSA_KEY_ADDRESSBOOK	KEY_ADDRESSBOOK
+#define TOSA_KEY_CANCEL		KEY_CANCEL
+#define TOSA_KEY_CENTER		KEY_SELECT /* ??? */
+#define TOSA_KEY_OK		KEY_OK
+#define TOSA_KEY_CALENDAR	KEY_CALENDAR
+#define TOSA_KEY_HOMEPAGE	KEY_HOMEPAGE
+#define TOSA_KEY_LIGHT		KEY_KBDILLUMTOGGLE
+#define TOSA_KEY_MENU		KEY_MENU
+#define TOSA_KEY_FN		KEY_FN
+#define TOSA_KEY_MAIL		KEY_MAIL
+#endif
+
+#endif /* _ASM_ARCH_TOSA_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/tosa_bt.h b/arch/arm/mach-pxa/include/mach/tosa_bt.h
new file mode 100644
index 0000000..efc3c3d
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/tosa_bt.h
@@ -0,0 +1,22 @@
+/*
+ * Tosa bluetooth built-in chip control.
+ *
+ * Later it may be shared with some other platforms.
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef TOSA_BT_H
+#define TOSA_BT_H
+
+struct tosa_bt_data {
+	int gpio_pwr;
+	int gpio_reset;
+};
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/trizeps4.h b/arch/arm/mach-pxa/include/mach/trizeps4.h
new file mode 100644
index 0000000..903e1a2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/trizeps4.h
@@ -0,0 +1,162 @@
+/************************************************************************
+ * Include file for TRIZEPS4 SoM and ConXS eval-board
+ * Copyright (c) Jürgen Schindele
+ * 2006
+ ************************************************************************/
+
+/*
+ * Includes/Defines
+ */
+#ifndef _TRIPEPS4_H_
+#define _TRIPEPS4_H_
+
+/* physical memory regions */
+#define TRIZEPS4_FLASH_PHYS	(PXA_CS0_PHYS)  /* Flash region */
+#define TRIZEPS4_DISK_PHYS	(PXA_CS1_PHYS)  /* Disk On Chip region */
+#define TRIZEPS4_ETH_PHYS	(PXA_CS2_PHYS)  /* Ethernet DM9000 region */
+#define TRIZEPS4_PIC_PHYS	(PXA_CS3_PHYS)	/* Logic chip on ConXS-Board */
+#define TRIZEPS4_SDRAM_BASE	0xa0000000      /* SDRAM region */
+
+				/* Logic on ConXS-board CSFR register*/
+#define TRIZEPS4_CFSR_PHYS	(PXA_CS3_PHYS)
+				/* Logic on ConXS-board BOCR register*/
+#define TRIZEPS4_BOCR_PHYS	(PXA_CS3_PHYS+0x02000000)
+				/* Logic on ConXS-board IRCR register*/
+#define TRIZEPS4_IRCR_PHYS	(PXA_CS3_PHYS+0x02400000)
+				/* Logic on ConXS-board UPSR register*/
+#define TRIZEPS4_UPSR_PHYS	(PXA_CS3_PHYS+0x02800000)
+				/* Logic on ConXS-board DICR register*/
+#define TRIZEPS4_DICR_PHYS	(PXA_CS3_PHYS+0x03800000)
+
+/* virtual memory regions */
+#define TRIZEPS4_DISK_VIRT	0xF0000000	/* Disk On Chip region */
+
+#define TRIZEPS4_PIC_VIRT	0xF0100000	/* not used */
+#define TRIZEPS4_CFSR_VIRT	0xF0100000
+#define TRIZEPS4_BOCR_VIRT	0xF0200000
+#define TRIZEPS4_DICR_VIRT	0xF0300000
+#define TRIZEPS4_IRCR_VIRT	0xF0400000
+#define TRIZEPS4_UPSR_VIRT	0xF0500000
+
+/* size of flash */
+#define TRIZEPS4_FLASH_SIZE	0x02000000	/* Flash size 32 MB */
+
+/* Ethernet Controller Davicom DM9000 */
+#define GPIO_DM9000		101
+#define TRIZEPS4_ETH_IRQ	IRQ_GPIO(GPIO_DM9000)
+
+/* UCB1400 audio / TS-controller */
+#define GPIO_UCB1400		1
+#define TRIZEPS4_UCB1400_IRQ	IRQ_GPIO(GPIO_UCB1400)
+
+/* PCMCIA socket Compact Flash */
+#define GPIO_PCD		11		/* PCMCIA Card Detect */
+#define TRIZEPS4_CD_IRQ		IRQ_GPIO(GPIO_PCD)
+#define GPIO_PRDY		13		/* READY / nINT */
+#define TRIZEPS4_READY_NINT	IRQ_GPIO(GPIO_PRDY)
+
+/* MMC socket */
+#define GPIO_MMC_DET		12
+#define TRIZEPS4_MMC_IRQ	IRQ_GPIO(GPIO_MMC_DET)
+
+/* DOC NAND chip */
+#define GPIO_DOC_LOCK           94
+#define GPIO_DOC_IRQ            93
+#define TRIZEPS4_DOC_IRQ        IRQ_GPIO(GPIO_DOC_IRQ)
+
+/* SPI interface */
+#define GPIO_SPI                53
+#define TRIZEPS4_SPI_IRQ        IRQ_GPIO(GPIO_SPI)
+
+/* LEDS using tx2 / rx2 */
+#define GPIO_SYS_BUSY_LED	46
+#define GPIO_HEARTBEAT_LED	47
+
+/* Off-module PIC on ConXS board */
+#define GPIO_PIC		0
+#define TRIZEPS4_PIC_IRQ	IRQ_GPIO(GPIO_PIC)
+
+#ifdef CONFIG_MACH_TRIZEPS_CONXS
+/* for CONXS base board define these registers */
+#define CFSR_P2V(x)	((x) - TRIZEPS4_CFSR_PHYS + TRIZEPS4_CFSR_VIRT)
+#define CFSR_V2P(x)	((x) - TRIZEPS4_CFSR_VIRT + TRIZEPS4_CFSR_PHYS)
+
+#define BCR_P2V(x)	((x) - TRIZEPS4_BOCR_PHYS + TRIZEPS4_BOCR_VIRT)
+#define BCR_V2P(x)	((x) - TRIZEPS4_BOCR_VIRT + TRIZEPS4_BOCR_PHYS)
+
+#define DCR_P2V(x)	((x) - TRIZEPS4_DICR_PHYS + TRIZEPS4_DICR_VIRT)
+#define DCR_V2P(x)	((x) - TRIZEPS4_DICR_VIRT + TRIZEPS4_DICR_PHYS)
+
+#define IRCR_P2V(x)	((x) - TRIZEPS4_IRCR_PHYS + TRIZEPS4_IRCR_VIRT)
+#define IRCR_V2P(x)	((x) - TRIZEPS4_IRCR_VIRT + TRIZEPS4_IRCR_PHYS)
+
+#ifndef __ASSEMBLY__
+static inline unsigned short CFSR_readw(void)
+{
+	/* [Compact Flash Status Register] is read only */
+	return *((unsigned short *)CFSR_P2V(0x0C000000));
+}
+static inline void BCR_writew(unsigned short value)
+{
+	/* [Board Control Regsiter] is write only */
+	*((unsigned short *)BCR_P2V(0x0E000000)) = value;
+}
+static inline void DCR_writew(unsigned short value)
+{
+	/* [Display Control Register] is write only */
+	*((unsigned short *)DCR_P2V(0x0E000000)) = value;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+	/* [InfraRed data Control Register] is write only */
+	*((unsigned short *)IRCR_P2V(0x0E000000)) = value;
+}
+#else
+#define ConXS_CFSR		CFSR_P2V(0x0C000000)
+#define ConXS_BCR		BCR_P2V(0x0E000000)
+#define ConXS_DCR		DCR_P2V(0x0F800000)
+#define ConXS_IRCR		IRCR_P2V(0x0F800000)
+#endif
+#else
+/* for whatever baseboard define function registers */
+static inline unsigned short CFSR_readw(void)
+{
+	return 0;
+}
+static inline void BCR_writew(unsigned short value)
+{
+	;
+}
+static inline void DCR_writew(unsigned short value)
+{
+	;
+}
+static inline void IRCR_writew(unsigned short value)
+{
+	;
+}
+#endif	/* CONFIG_MACH_TRIZEPS_CONXS */
+
+#define ConXS_CFSR_BVD_MASK	0x0003
+#define ConXS_CFSR_BVD1		(1 << 0)
+#define ConXS_CFSR_BVD2		(1 << 1)
+#define ConXS_CFSR_VS_MASK	0x000C
+#define ConXS_CFSR_VS1		(1 << 2)
+#define ConXS_CFSR_VS2		(1 << 3)
+#define ConXS_CFSR_VS_5V	(0x3 << 2)
+#define ConXS_CFSR_VS_3V3	0x0
+
+#define ConXS_BCR_S0_POW_EN0	(1 << 0)
+#define ConXS_BCR_S0_POW_EN1	(1 << 1)
+#define ConXS_BCR_L_DISP	(1 << 4)
+#define ConXS_BCR_CF_BUF_EN	(1 << 5)
+#define ConXS_BCR_CF_RESET	(1 << 7)
+#define ConXS_BCR_S0_VCC_3V3	0x1
+#define ConXS_BCR_S0_VCC_5V0	0x2
+#define ConXS_BCR_S0_VPP_12V	0x4
+#define ConXS_BCR_S0_VPP_3V3	0x8
+
+#define ConXS_IRCR_MODE		(1 << 0)
+#define ConXS_IRCR_SD		(1 << 1)
+
+#endif /* _TRIPEPS4_H_ */
diff --git a/arch/arm/mach-pxa/include/mach/udc.h b/arch/arm/mach-pxa/include/mach/udc.h
new file mode 100644
index 0000000..2f82332
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/udc.h
@@ -0,0 +1,8 @@
+/*
+ * arch/arm/mach-pxa/include/mach/udc.h
+ *
+ */
+#include <asm/mach/udc_pxa2xx.h>
+
+extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
+
diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h
new file mode 100644
index 0000000..21e3e89
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/uncompress.h
@@ -0,0 +1,45 @@
+/*
+ * arch/arm/mach-pxa/include/mach/uncompress.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/serial_reg.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+
+#define __REG(x)       ((volatile unsigned long *)x)
+
+static volatile unsigned long *UART = FFUART;
+
+static inline void putc(char c)
+{
+	if (!(UART[UART_IER] & IER_UUE))
+		return;
+	while (!(UART[UART_LSR] & LSR_TDRQ))
+		barrier();
+	UART[UART_TX] = c;
+}
+
+/*
+ * This does not append a newline
+ */
+static inline void flush(void)
+{
+}
+
+static inline void arch_decomp_setup(void)
+{
+	if (machine_is_littleton())
+		UART = STUART;
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
new file mode 100644
index 0000000..10988c2
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -0,0 +1,96 @@
+/*
+ * arch/arm/mach-pxa/include/mach/viper.h
+ *
+ * Author:	Ian Campbell
+ * Created:	Feb 03, 2003
+ * Copyright:	Arcom Control Systems.
+ *
+ * Maintained by Marc Zyngier <maz@misterjones.org>
+ *			      <marc.zyngier@altran.com>
+ *
+ * Created based on lubbock.h:
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef ARCH_VIPER_H
+#define ARCH_VIPER_H
+
+#define VIPER_BOOT_PHYS		PXA_CS0_PHYS
+#define VIPER_FLASH_PHYS	PXA_CS1_PHYS
+#define VIPER_ETH_PHYS		PXA_CS2_PHYS
+#define VIPER_USB_PHYS		PXA_CS3_PHYS
+#define VIPER_ETH_DATA_PHYS	PXA_CS4_PHYS
+#define VIPER_CPLD_PHYS		PXA_CS5_PHYS
+
+#define VIPER_CPLD_BASE		(0xf0000000)
+#define VIPER_PC104IO_BASE	(0xf1000000)
+#define VIPER_USB_BASE		(0xf1800000)
+
+#define VIPER_ETH_GPIO		(0)
+#define VIPER_CPLD_GPIO		(1)
+#define VIPER_USB_GPIO		(2)
+#define VIPER_UARTA_GPIO	(4)
+#define VIPER_UARTB_GPIO	(3)
+#define VIPER_CF_CD_GPIO	(32)
+#define VIPER_CF_RDY_GPIO	(8)
+#define VIPER_BCKLIGHT_EN_GPIO	(9)
+#define VIPER_LCD_EN_GPIO	(10)
+#define VIPER_PSU_DATA_GPIO	(6)
+#define VIPER_PSU_CLK_GPIO	(11)
+#define VIPER_UART_SHDN_GPIO	(12)
+#define VIPER_BRIGHTNESS_GPIO	(16)
+#define VIPER_PSU_nCS_LD_GPIO	(19)
+#define VIPER_UPS_GPIO		(20)
+#define VIPER_CF_POWER_GPIO	(82)
+#define VIPER_TPM_I2C_SDA_GPIO	(26)
+#define VIPER_TPM_I2C_SCL_GPIO	(27)
+#define VIPER_RTC_I2C_SDA_GPIO	(83)
+#define VIPER_RTC_I2C_SCL_GPIO	(84)
+
+#define VIPER_CPLD_P2V(x)	((x) - VIPER_CPLD_PHYS + VIPER_CPLD_BASE)
+#define VIPER_CPLD_V2P(x)	((x) - VIPER_CPLD_BASE + VIPER_CPLD_PHYS)
+
+#ifndef __ASSEMBLY__
+#  define __VIPER_CPLD_REG(x)	(*((volatile u16 *)VIPER_CPLD_P2V(x)))
+#endif
+
+/* board level registers in the CPLD: (offsets from CPLD_BASE) ... */
+
+/* ... Physical addresses */
+#define _VIPER_LO_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100000)
+#define _VIPER_ICR_PHYS		(VIPER_CPLD_PHYS + 0x100002)
+#define _VIPER_HI_IRQ_STATUS	(VIPER_CPLD_PHYS + 0x100004)
+#define _VIPER_VERSION_PHYS	(VIPER_CPLD_PHYS + 0x100006)
+#define VIPER_UARTA_PHYS	(VIPER_CPLD_PHYS + 0x300010)
+#define VIPER_UARTB_PHYS	(VIPER_CPLD_PHYS + 0x300000)
+#define _VIPER_SRAM_BASE	(VIPER_CPLD_PHYS + 0x800000)
+
+/* ... Virtual addresses */
+#define VIPER_LO_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_LO_IRQ_STATUS)
+#define VIPER_HI_IRQ_STATUS	__VIPER_CPLD_REG(_VIPER_HI_IRQ_STATUS)
+#define VIPER_VERSION		__VIPER_CPLD_REG(_VIPER_VERSION_PHYS)
+#define VIPER_ICR		__VIPER_CPLD_REG(_VIPER_ICR_PHYS)
+
+/* Decode VIPER_VERSION register */
+#define VIPER_CPLD_REVISION(x)	(((x) >> 5) & 0x7)
+#define VIPER_BOARD_VERSION(x)	(((x) >> 3) & 0x3)
+#define VIPER_BOARD_ISSUE(x)	(((x) >> 0) & 0x7)
+
+/* Interrupt and Configuration Register (VIPER_ICR) */
+/* This is a write only register. Only CF_RST is used under Linux */
+
+extern void viper_cf_rst(int state);
+
+#define VIPER_ICR_RETRIG	(1 << 0)
+#define VIPER_ICR_AUTO_CLR	(1 << 1)
+#define VIPER_ICR_R_DIS		(1 << 2)
+#define VIPER_ICR_CF_RST	(1 << 3)
+
+#endif
+
diff --git a/arch/arm/mach-pxa/include/mach/vmalloc.h b/arch/arm/mach-pxa/include/mach/vmalloc.h
new file mode 100644
index 0000000..e90c5ee
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/vmalloc.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/mach-pxa/include/mach/vmalloc.h
+ *
+ * Author:	Nicolas Pitre
+ * Copyright:	(C) 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define VMALLOC_END       (0xe8000000)
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
new file mode 100644
index 0000000..0d35ca0
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -0,0 +1,47 @@
+#ifndef __ASM_ARCH_ZYLONITE_H
+#define __ASM_ARCH_ZYLONITE_H
+
+#define ZYLONITE_ETH_PHYS	0x14000000
+
+#define EXT_GPIO(x)		(128 + (x))
+
+/* the following variables are processor specific and initialized
+ * by the corresponding zylonite_pxa3xx_init()
+ */
+struct platform_mmc_slot {
+	int gpio_cd;
+	int gpio_wp;
+};
+
+extern struct platform_mmc_slot zylonite_mmc_slot[];
+
+extern int gpio_eth_irq;
+extern int gpio_debug_led1;
+extern int gpio_debug_led2;
+
+extern int wm9713_irq;
+
+extern int lcd_id;
+extern int lcd_orientation;
+
+#ifdef CONFIG_CPU_PXA300
+extern void zylonite_pxa300_init(void);
+#else
+static inline void zylonite_pxa300_init(void)
+{
+	if (cpu_is_pxa300() || cpu_is_pxa310())
+		panic("%s: PXA300/PXA310 not supported\n", __FUNCTION__);
+}
+#endif
+
+#ifdef CONFIG_CPU_PXA320
+extern void zylonite_pxa320_init(void);
+#else
+static inline void zylonite_pxa320_init(void)
+{
+	if (cpu_is_pxa320())
+		panic("%s: PXA320 not supported\n", __FUNCTION__);
+}
+#endif
+
+#endif /* __ASM_ARCH_ZYLONITE_H */
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index a9a0c3f..fa69c3a 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -17,11 +17,10 @@
 #include <linux/interrupt.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/pxa-regs.h>
 
 #include "generic.h"
 
@@ -58,7 +57,7 @@ void __init pxa_init_irq(int irq_nr, set_wake_t fn)
 
 	pxa_internal_irq_nr = irq_nr;
 
-	for (irq = 0; irq < irq_nr; irq += 32) {
+	for (irq = PXA_IRQ(0); irq < PXA_IRQ(irq_nr); irq += 32) {
 		_ICMR(irq) = 0;	/* disable all IRQs */
 		_ICLR(irq) = 0;	/* all IRQs are IRQ, not FIQ */
 	}
diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c
index 38aa927..18b20d4 100644
--- a/arch/arm/mach-pxa/leds-idp.c
+++ b/arch/arm/mach-pxa/leds-idp.c
@@ -14,12 +14,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/idp.h>
+#include <mach/pxa-regs.h>
+#include <mach/idp.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-lubbock.c b/arch/arm/mach-pxa/leds-lubbock.c
index afbc669..1a25802 100644
--- a/arch/arm/mach-pxa/leds-lubbock.c
+++ b/arch/arm/mach-pxa/leds-lubbock.c
@@ -13,11 +13,11 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-mainstone.c b/arch/arm/mach-pxa/leds-mainstone.c
index 065293e..95e06b8 100644
--- a/arch/arm/mach-pxa/leds-mainstone.c
+++ b/arch/arm/mach-pxa/leds-mainstone.c
@@ -12,12 +12,12 @@
 
 #include <linux/init.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/system.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mainstone.h>
+#include <mach/pxa-regs.h>
+#include <mach/mainstone.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-pxa/leds-trizeps4.c b/arch/arm/mach-pxa/leds-trizeps4.c
deleted file mode 100644
index 21880da..0000000
--- a/arch/arm/mach-pxa/leds-trizeps4.c
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * linux/arch/arm/mach-pxa/leds-trizeps4.c
- *
- *  Author:	Jürgen Schindele
- *  Created:	20 02, 2006
- *  Copyright:	Jürgen Schindele
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-
-#include <asm/hardware.h>
-#include <asm/system.h>
-#include <asm/types.h>
-#include <asm/leds.h>
-
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-
-#include "leds.h"
-
-#define LED_STATE_ENABLED	1
-#define LED_STATE_CLAIMED	2
-
-#define SYS_BUSY		0x01
-#define HEARTBEAT		0x02
-#define BLINK			0x04
-
-static unsigned int led_state;
-static unsigned int hw_led_state;
-
-void trizeps4_leds_event(led_event_t evt)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-
-	switch (evt) {
-	case led_start:
-		hw_led_state = 0;
-		pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
-		pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
-		led_state = LED_STATE_ENABLED;
-		break;
-
-	case led_stop:
-		led_state &= ~LED_STATE_ENABLED;
-		break;
-
-	case led_claim:
-		led_state |= LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-	case led_release:
-		led_state &= ~LED_STATE_CLAIMED;
-		hw_led_state = 0;
-		break;
-
-#ifdef CONFIG_LEDS_TIMER
-	case led_timer:
-		hw_led_state ^= HEARTBEAT;
-		break;
-#endif
-
-#ifdef CONFIG_LEDS_CPU
-	case led_idle_start:
-		hw_led_state &= ~SYS_BUSY;
-		break;
-
-	case led_idle_end:
-		hw_led_state |= SYS_BUSY;
-		break;
-#endif
-
-	case led_halted:
-		break;
-
-	case led_green_on:
-		hw_led_state |= BLINK;
-		break;
-
-	case led_green_off:
-		hw_led_state &= ~BLINK;
-		break;
-
-	case led_amber_on:
-		break;
-
-	case led_amber_off:
-		break;
-
-	case led_red_on:
-		break;
-
-	case led_red_off:
-		break;
-
-	default:
-		break;
-	}
-
-	if  (led_state & LED_STATE_ENABLED) {
-		switch (hw_led_state) {
-			case 0:
-				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 1:
-				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 2:
-				GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-			case 3:
-				GPCR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-				GPCR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-				break;
-		}
-	}
-	else {
-		/* turn all off */
-		GPSR(GPIO_SYS_BUSY_LED)  |= GPIO_bit(GPIO_SYS_BUSY_LED);
-		GPSR(GPIO_HEARTBEAT_LED) |= GPIO_bit(GPIO_HEARTBEAT_LED);
-	}
-
-	local_irq_restore(flags);
-}
diff --git a/arch/arm/mach-pxa/leds.c b/arch/arm/mach-pxa/leds.c
index e13eb84..bbe4d5f 100644
--- a/arch/arm/mach-pxa/leds.c
+++ b/arch/arm/mach-pxa/leds.c
@@ -24,8 +24,6 @@ pxa_leds_init(void)
 		leds_event = mainstone_leds_event;
 	if (machine_is_pxa_idp())
 		leds_event = idp_leds_event;
-	if (machine_is_trizeps4())
-		leds_event = trizeps4_leds_event;
 
 	leds_event(led_start);
 	return 0;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 5306544..b4d00ab 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -20,25 +20,29 @@
 #include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/clk.h>
+#include <linux/spi/spi.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa27x_keypad.h>
-#include <asm/arch/littleton.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+#include <mach/littleton.h>
 
 #include "generic.h"
 
@@ -70,8 +74,8 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 
 	/* SSP2 */
 	GPIO25_SSP2_SCLK,
-	GPIO17_SSP2_FRM,
 	GPIO27_SSP2_TXD,
+	GPIO17_GPIO,	/* SFRM as chip-select */
 
 	/* Debug Ethernet */
 	GPIO90_GPIO,
@@ -101,172 +105,26 @@ static struct resource smc91x_resources[] = {
 	[1] = {
 		.start	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
 		.end	= IRQ_GPIO(mfp_to_gpio(MFP_PIN_GPIO90)),
-		.flags	= IORESOURCE_IRQ | IRQF_TRIGGER_FALLING,
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
 	}
 };
 
+static struct smc91x_platdata littleton_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &littleton_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULES)
-/* use bit 30, 31 as the indicator of command parameter number */
-#define CMD0(x)		((0x00000000) | ((x) << 9))
-#define CMD1(x, x1)	((0x40000000) | ((x) << 9) | 0x100 | (x1))
-#define CMD2(x, x1, x2)	((0x80000000) | ((x) << 18) | 0x20000 |\
-			 ((x1) << 9) | 0x100 | (x2))
-
-static uint32_t lcd_panel_reset[] = {
-	CMD0(0x1), /* reset */
-	CMD0(0x0), /* nop */
-	CMD0(0x0), /* nop */
-	CMD0(0x0), /* nop */
-};
-
-static uint32_t lcd_panel_on[] = {
-	CMD0(0x29),		/* Display ON */
-	CMD2(0xB8, 0xFF, 0xF9),	/* Output Control */
-	CMD0(0x11),		/* Sleep out */
-	CMD1(0xB0, 0x16),	/* Wake */
-};
-
-static uint32_t lcd_panel_off[] = {
-	CMD0(0x28),		/* Display OFF */
-	CMD2(0xB8, 0x80, 0x02),	/* Output Control */
-	CMD0(0x10),		/* Sleep in */
-	CMD1(0xB0, 0x00),	/* Deep stand by in */
-};
-
-static uint32_t lcd_vga_pass_through[] = {
-	CMD1(0xB0, 0x16),
-	CMD1(0xBC, 0x80),
-	CMD1(0xE1, 0x00),
-	CMD1(0x36, 0x50),
-	CMD1(0x3B, 0x00),
-};
-
-static uint32_t lcd_qvga_pass_through[] = {
-	CMD1(0xB0, 0x16),
-	CMD1(0xBC, 0x81),
-	CMD1(0xE1, 0x00),
-	CMD1(0x36, 0x50),
-	CMD1(0x3B, 0x22),
-};
-
-static uint32_t lcd_vga_transfer[] = {
-	CMD1(0xcf, 0x02), 	/* Blanking period control (1) */
-	CMD2(0xd0, 0x08, 0x04),	/* Blanking period control (2) */
-	CMD1(0xd1, 0x01),	/* CKV timing control on/off */
-	CMD2(0xd2, 0x14, 0x00),	/* CKV 1,2 timing control */
-	CMD2(0xd3, 0x1a, 0x0f),	/* OEV timing control */
-	CMD2(0xd4, 0x1f, 0xaf),	/* ASW timing control (1) */
-	CMD1(0xd5, 0x14),	/* ASW timing control (2) */
-	CMD0(0x21),		/* Invert for normally black display */
-	CMD0(0x29),		/* Display on */
-};
-
-static uint32_t lcd_qvga_transfer[] = {
-	CMD1(0xd6, 0x02),	/* Blanking period control (1) */
-	CMD2(0xd7, 0x08, 0x04),	/* Blanking period control (2) */
-	CMD1(0xd8, 0x01),	/* CKV timing control on/off */
-	CMD2(0xd9, 0x00, 0x08),	/* CKV 1,2 timing control */
-	CMD2(0xde, 0x05, 0x0a),	/* OEV timing control */
-	CMD2(0xdf, 0x0a, 0x19),	/* ASW timing control (1) */
-	CMD1(0xe0, 0x0a),	/* ASW timing control (2) */
-	CMD0(0x21),		/* Invert for normally black display */
-	CMD0(0x29),		/* Display on */
-};
-
-static uint32_t lcd_panel_config[] = {
-	CMD2(0xb8, 0xff, 0xf9),	/* Output control */
-	CMD0(0x11),		/* sleep out */
-	CMD1(0xba, 0x01),	/* Display mode (1) */
-	CMD1(0xbb, 0x00),	/* Display mode (2) */
-	CMD1(0x3a, 0x60),	/* Display mode 18-bit RGB */
-	CMD1(0xbf, 0x10),	/* Drive system change control */
-	CMD1(0xb1, 0x56),	/* Booster operation setup */
-	CMD1(0xb2, 0x33),	/* Booster mode setup */
-	CMD1(0xb3, 0x11),	/* Booster frequency setup */
-	CMD1(0xb4, 0x02),	/* Op amp/system clock */
-	CMD1(0xb5, 0x35),	/* VCS voltage */
-	CMD1(0xb6, 0x40),	/* VCOM voltage */
-	CMD1(0xb7, 0x03),	/* External display signal */
-	CMD1(0xbd, 0x00),	/* ASW slew rate */
-	CMD1(0xbe, 0x00),	/* Dummy data for QuadData operation */
-	CMD1(0xc0, 0x11),	/* Sleep out FR count (A) */
-	CMD1(0xc1, 0x11),	/* Sleep out FR count (B) */
-	CMD1(0xc2, 0x11),	/* Sleep out FR count (C) */
-	CMD2(0xc3, 0x20, 0x40),	/* Sleep out FR count (D) */
-	CMD2(0xc4, 0x60, 0xc0),	/* Sleep out FR count (E) */
-	CMD2(0xc5, 0x10, 0x20),	/* Sleep out FR count (F) */
-	CMD1(0xc6, 0xc0),	/* Sleep out FR count (G) */
-	CMD2(0xc7, 0x33, 0x43),	/* Gamma 1 fine tuning (1) */
-	CMD1(0xc8, 0x44),	/* Gamma 1 fine tuning (2) */
-	CMD1(0xc9, 0x33),	/* Gamma 1 inclination adjustment */
-	CMD1(0xca, 0x00),	/* Gamma 1 blue offset adjustment */
-	CMD2(0xec, 0x01, 0xf0),	/* Horizontal clock cycles */
-};
-
-static void ssp_reconfig(struct ssp_dev *dev, int nparam)
-{
-	static int last_nparam = -1;
-
-	/* check if it is necessary to re-config SSP */
-	if (nparam == last_nparam)
-		return;
-
-	ssp_disable(dev);
-	ssp_config(dev, (nparam == 2) ? 0x0010058a : 0x00100581, 0x18, 0, 0);
-
-	last_nparam = nparam;
-}
-
-static void ssp_send_cmd(uint32_t *cmd, int num)
-{
-	static int ssp_initialized;
-	static struct ssp_dev ssp2;
-
-	int i;
-
-	if (!ssp_initialized) {
-		ssp_init(&ssp2, 2, SSP_NO_IRQ);
-		ssp_initialized = 1;
-	}
-
-	clk_enable(ssp2.ssp->clk);
-	for (i = 0; i < num; i++, cmd++) {
-		ssp_reconfig(&ssp2, (*cmd >> 30) & 0x3);
-		ssp_write_word(&ssp2, *cmd & 0x3fffffff);
-
-		/* FIXME: ssp_flush() is mandatory here to work */
-		ssp_flush(&ssp2);
-	}
-	clk_disable(ssp2.ssp->clk);
-}
-
-static void littleton_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on) {
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_on));
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_reset));
-		if (var->xres > 240) {
-			/* VGA */
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_pass_through));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_vga_transfer));
-		} else {
-			/* QVGA */
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_pass_through));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_config));
-			ssp_send_cmd(ARRAY_AND_SIZE(lcd_qvga_transfer));
-		}
-	} else
-		ssp_send_cmd(ARRAY_AND_SIZE(lcd_panel_off));
-}
-
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info tpo_tdo24mtea1_modes[] = {
 	[0] = {
 		/* VGA */
@@ -302,7 +160,6 @@ static struct pxafb_mach_info littleton_lcd_info = {
 	.modes			= tpo_tdo24mtea1_modes,
 	.num_modes		= 2,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP,
-	.pxafb_lcd_power	= littleton_lcd_power,
 };
 
 static void littleton_init_lcd(void)
@@ -311,9 +168,54 @@ static void littleton_init_lcd(void)
 }
 #else
 static inline void littleton_init_lcd(void) {};
-#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULES */
+#endif /* CONFIG_FB_PXA || CONFIG_FB_PXA_MODULE */
+
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master littleton_spi_info = {
+	.num_chipselect		= 1,
+};
+
+static void littleton_tdo24m_cs(u32 cmd)
+{
+	gpio_set_value(LITTLETON_GPIO_LCD_CS, !(cmd == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip littleton_tdo24m_chip = {
+	.rx_threshold	= 1,
+	.tx_threshold	= 1,
+	.cs_control	= littleton_tdo24m_cs,
+};
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+static struct spi_board_info littleton_spi_devices[] __initdata = {
+	{
+		.modalias	= "tdo24m",
+		.max_speed_hz	= 1000000,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.controller_data= &littleton_tdo24m_chip,
+	},
+};
+
+static void __init littleton_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(LITTLETON_GPIO_LCD_CS, "LCD_CS");
+	if (err) {
+		pr_warning("failed to request GPIO for LCS CS\n");
+		return;
+	}
+
+	gpio_direction_output(LITTLETON_GPIO_LCD_CS, 1);
+
+	pxa2xx_set_spi_info(2, &littleton_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(littleton_spi_devices));
+}
+#else
+static inline void littleton_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int littleton_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(1, 3, KEY_0), KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), KEY(2, 0, KEY_3),
@@ -361,6 +263,57 @@ static void __init littleton_init_keypad(void)
 static inline void littleton_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition littleton_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data littleton_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= littleton_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(littleton_nand_partitions),
+};
+
+static void __init littleton_init_nand(void)
+{
+	pxa3xx_set_nand_info(&littleton_nand_info);
+}
+#else
+static inline void littleton_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
 static void __init littleton_init(void)
 {
 	/* initialize MFP configurations */
@@ -372,8 +325,10 @@ static void __init littleton_init(void)
 	 */
 	platform_device_register(&smc91x_device);
 
+	littleton_init_spi();
 	littleton_init_lcd();
 	littleton_init_keypad();
+	littleton_init_nand();
 }
 
 MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleton)")
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index a20e4b1..de3f67d 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -23,12 +23,13 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/pwm_backlight.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -37,19 +38,56 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/lpd270.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/lpd270.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
 
 #include "generic.h"
 #include "devices.h"
 
+static unsigned long lpd270_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO15_nCS_1,	/* Mainboard Flash */
+	GPIO78_nCS_2,	/* CPLD + Ethernet */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO16_PWM0_OUT,	/* Backlight */
+
+	/* USB Host */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+
+	/* AC97 */
+	GPIO45_AC97_SYSCLK,
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
+};
 
 static unsigned int lpd270_irq_enabled;
 
@@ -87,8 +125,7 @@ static void lpd270_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
 		if (likely(pending)) {
 			irq = LPD270_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 
 			pending = __raw_readw(LPD270_INT_STATUS) &
 						lpd270_irq_enabled;
@@ -112,7 +149,7 @@ static void __init lpd270_init_irq(void)
 		set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
 	}
 	set_irq_chained_handler(IRQ_GPIO(0), lpd270_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 
@@ -134,9 +171,12 @@ static struct sys_device lpd270_irq_device = {
 
 static int __init lpd270_irq_device_init(void)
 {
-	int ret = sysdev_class_register(&lpd270_irq_sysclass);
-	if (ret == 0)
-		ret = sysdev_register(&lpd270_irq_device);
+	int ret = -ENODEV;
+	if (machine_is_logicpd_pxa270()) {
+		ret = sysdev_class_register(&lpd270_irq_sysclass);
+		if (ret == 0)
+			ret = sysdev_register(&lpd270_irq_device);
+	}
 	return ret;
 }
 
@@ -164,11 +204,6 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
-static struct platform_device lpd270_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
 static struct resource lpd270_flash_resources[] = {
 	[0] = {
 		.start	= PXA_CS0_PHYS,
@@ -233,21 +268,20 @@ static struct platform_device lpd270_flash_device[2] = {
 	},
 };
 
-static void lpd270_backlight_power(int on)
-{
-	if (on) {
-		pxa_gpio_mode(GPIO16_PWM0_MD);
-		pxa_set_cken(CKEN_PWM0, 1);
-		PWM_CTRL0 = 0;
-		PWM_PWDUTY0 = 0x3ff;
-		PWM_PERVAL0 = 0x3ff;
-	} else {
-		PWM_CTRL0 = 0;
-		PWM_PWDUTY0 = 0x0;
-		PWM_PERVAL0 = 0x3FF;
-		pxa_set_cken(CKEN_PWM0, 0);
-	}
-}
+static struct platform_pwm_backlight_data lpd270_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1,
+	.dft_brightness	= 1,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device lpd270_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent	= &pxa27x_device_pwm0.dev,
+		.platform_data = &lpd270_backlight_data,
+	},
+};
 
 /* 5.7" TFT QVGA (LoLo display number 1) */
 static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
@@ -267,9 +301,8 @@ static struct pxafb_mode_info sharp_lq057q3dc02_mode = {
 static struct pxafb_mach_info sharp_lq057q3dc02 = {
 	.modes			= &sharp_lq057q3dc02_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 12.1" TFT SVGA (LoLo display number 2) */
@@ -290,9 +323,8 @@ static struct pxafb_mode_info sharp_lq121s1dg31_mode = {
 static struct pxafb_mach_info sharp_lq121s1dg31 = {
 	.modes			= &sharp_lq121s1dg31_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 3.6" TFT QVGA (LoLo display number 3) */
@@ -313,9 +345,8 @@ static struct pxafb_mode_info sharp_lq036q1da01_mode = {
 static struct pxafb_mach_info sharp_lq036q1da01 = {
 	.modes			= &sharp_lq036q1da01_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 6.4" TFT VGA (LoLo display number 5) */
@@ -336,9 +367,8 @@ static struct pxafb_mode_info sharp_lq64d343_mode = {
 static struct pxafb_mach_info sharp_lq64d343 = {
 	.modes			= &sharp_lq64d343_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 10.4" TFT VGA (LoLo display number 7) */
@@ -359,9 +389,8 @@ static struct pxafb_mode_info sharp_lq10d368_mode = {
 static struct pxafb_mach_info sharp_lq10d368 = {
 	.modes			= &sharp_lq10d368_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 /* 3.5" TFT QVGA (LoLo display number 8) */
@@ -382,9 +411,8 @@ static struct pxafb_mode_info sharp_lq035q7db02_20_mode = {
 static struct pxafb_mach_info sharp_lq035q7db02_20 = {
 	.modes			= &sharp_lq035q7db02_20_mode,
 	.num_modes		= 1,
-	.lccr0			= 0x07800080,
-	.lccr3			= 0x00400000,
-	.pxafb_backlight_power	= lpd270_backlight_power,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL |
+				  LCD_ALTERNATE_MAPPING,
 };
 
 static struct pxafb_mach_info *lpd270_lcd_to_use;
@@ -414,32 +442,20 @@ __setup("lcd=", lpd270_set_lcd);
 
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
-	&lpd270_audio_device,
+	&lpd270_backlight_device,
 	&lpd270_flash_device[0],
 	&lpd270_flash_device[1],
 };
 
-static int lpd270_ohci_init(struct device *dev)
-{
-	/* setup Port1 GPIO pin. */
-	pxa_gpio_mode(88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-	pxa_gpio_mode(89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data lpd270_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= lpd270_ohci_init,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 static void __init lpd270_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
+
 	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
@@ -450,13 +466,10 @@ static void __init lpd270_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
-	/*
-	 * On LogicPD PXA270, we route AC97_SYSCLK via GPIO45.
-	 */
-	pxa_gpio_mode(GPIO45_SYSCLK_AC97_MD);
-
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
+	pxa_set_ac97_info(NULL);
+
 	if (lpd270_lcd_to_use != NULL)
 		set_pxa_fb_info(lpd270_lcd_to_use);
 
@@ -478,15 +491,6 @@ static void __init lpd270_map_io(void)
 	pxa_map_io();
 	iotable_init(lpd270_io_desc, ARRAY_SIZE(lpd270_io_desc));
 
-	/* initialize sleep mode regs (wake-up sources, etc) */
-	PGSR0 = 0x00008800;
-	PGSR1 = 0x00000002;
-	PGSR2 = 0x0001FC00;
-	PGSR3 = 0x00001F81;
-	PWER  = 0xC0000002;
-	PRER  = 0x00000002;
-	PFER  = 0x00000002;
-
 	/* for use I SRAM as framebuffer.  */
 	PSLR |= 0x00000F04;
 	PCFR  = 0x00000066;
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index 7b9bdd0..bff7043 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -21,15 +21,16 @@
 #include <linux/interrupt.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
+#include <linux/smc91x.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <asm/arch/pxa2xx_spi.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,27 +41,52 @@
 
 #include <asm/hardware/sa1111.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/lubbock.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/audio.h>
+#include <mach/lubbock.h>
+#include <mach/udc.h>
+#include <mach/irda.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long lubbock_pin_config[] __initdata = {
 	GPIO15_nCS_1,	/* CS1 - Flash */
+	GPIO78_nCS_2,	/* CS2 - Baseboard FGPA */
 	GPIO79_nCS_3,	/* CS3 - SMC ethernet */
+	GPIO80_nCS_4,	/* CS4 - SA1111 */
 
 	/* SSP data pins */
 	GPIO23_SSP1_SCLK,
 	GPIO25_SSP1_TXD,
 	GPIO26_SSP1_RXD,
 
+	/* LCD - 16bpp DSTN */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
 	/* BTUART */
 	GPIO42_BTUART_RXD,
 	GPIO43_BTUART_TXD,
@@ -129,8 +155,7 @@ static void lubbock_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);	/* clear our parent irq */
 		if (likely(pending)) {
 			irq = LUBBOCK_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = LUB_IRQ_SET_CLR & lubbock_irq_enabled;
 	} while (pending);
@@ -150,7 +175,7 @@ static void __init lubbock_init_irq(void)
 	}
 
 	set_irq_chained_handler(IRQ_GPIO(0), lubbock_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -196,11 +221,6 @@ static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	// no D+ pullup; lubbock can't connect/disconnect in software
 };
 
-static struct platform_device lub_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-};
-
 static struct resource sa1111_resources[] = {
 	[0] = {
 		.start	= 0x10000000,
@@ -227,15 +247,7 @@ static struct platform_device sa1111_device = {
  * for the temperature sensors.
  */
 static struct pxa2xx_spi_master pxa_ssp_master_info = {
-	.num_chipselect	= 0,
-};
-
-static struct platform_device pxa_ssp = {
-	.name		= "pxa2xx-spi",
-	.id		= 1,
-	.dev = {
-		.platform_data	= &pxa_ssp_master_info,
-	},
+	.num_chipselect	= 1,
 };
 
 static int lubbock_ads7846_pendown_state(void)
@@ -296,11 +308,18 @@ static struct resource smc91x_resources[] = {
 	},
 };
 
+static struct smc91x_platdata lubbock_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_2,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &lubbock_smc91x_info,
+	},
 };
 
 static struct resource flash_resources[] = {
@@ -368,11 +387,9 @@ static struct platform_device lubbock_flash_device[2] = {
 
 static struct platform_device *devices[] __initdata = {
 	&sa1111_device,
-	&lub_audio_device,
 	&smc91x_device,
 	&lubbock_flash_device[0],
 	&lubbock_flash_device[1],
-	&pxa_ssp,
 };
 
 static struct pxafb_mode_info sharp_lm8v31_mode = {
@@ -476,6 +493,7 @@ static void lubbock_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		LUB_MISC_WR |= 1 << 4;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	local_irq_restore(flags);
 }
 
@@ -490,10 +508,12 @@ static void __init lubbock_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
 	pxa_set_mci_info(&lubbock_mci_platform_data);
 	pxa_set_ficp_info(&lubbock_ficp_platform_data);
+	pxa_set_ac97_info(NULL);
 
 	lubbock_flash_data[0].width = lubbock_flash_data[1].width =
 		(BOOT_DEF & 1) ? 2 : 4;
@@ -505,6 +525,7 @@ static void __init lubbock_init(void)
 	lubbock_flash_data[flashboot].name = "boot-rom";
 	(void) platform_add_devices(devices, ARRAY_SIZE(devices));
 
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
 	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index badba06..519138b 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -17,31 +17,32 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/mfd/htc-egpio.h>
 #include <linux/mfd/htc-pasic3.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
 #include <linux/mtd/physmap.h>
 #include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
 
-#include <asm/gpio.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/magician.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-
+#include <mach/magician.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+
+#include "devices.h"
 #include "generic.h"
 
-static unsigned long magician_pin_config[] = {
+static unsigned long magician_pin_config[] __initdata = {
 
 	/* SDRAM and Static Memory I/O Signals */
 	GPIO20_nSDCS_2,
@@ -131,6 +132,7 @@ static unsigned long magician_pin_config[] = {
 static void magician_irda_transceiver_mode(struct device *dev, int mode)
 {
 	gpio_set_value(GPIO83_MAGICIAN_nIR_EN, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 static struct pxaficp_platform_data magician_ficp_info = {
@@ -348,47 +350,66 @@ static struct pxafb_mach_info samsung_info = {
  * Backlight
  */
 
-static void magician_set_bl_intensity(int intensity)
+static int magician_backlight_init(struct device *dev)
 {
-	if (intensity) {
-		PWM_CTRL0 = 1;
-		PWM_PERVAL0 = 0xc8;
-		if (intensity > 0xc7) {
-			PWM_PWDUTY0 = intensity - 0x48;
-			gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
-		} else {
-			PWM_PWDUTY0 = intensity;
-			gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
-		}
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 1);
-		pxa_set_cken(CKEN_PWM0, 1);
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2");
+	if (ret)
+		goto err2;
+	return 0;
+
+err2:
+	gpio_free(EGPIO_MAGICIAN_BL_POWER);
+err:
+	return ret;
+}
+
+static int magician_backlight_notify(int brightness)
+{
+	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
+	if (brightness >= 200) {
+		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 1);
+		return brightness - 72;
 	} else {
-		/* PWM_PWDUTY0 = intensity; */
-		gpio_set_value(EGPIO_MAGICIAN_BL_POWER, 0);
-		pxa_set_cken(CKEN_PWM0, 0);
+		gpio_set_value(EGPIO_MAGICIAN_BL_POWER2, 0);
+		return brightness;
 	}
 }
 
-static struct generic_bl_info backlight_info = {
-	.default_intensity = 0x64,
-	.limit_mask        = 0x0b,
-	.max_intensity     = 0xc7+0x48,
-	.set_bl_intensity  = magician_set_bl_intensity,
+static void magician_backlight_exit(struct device *dev)
+{
+	gpio_free(EGPIO_MAGICIAN_BL_POWER);
+	gpio_free(EGPIO_MAGICIAN_BL_POWER2);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 272,
+	.dft_brightness = 100,
+	.pwm_period_ns  = 30923,
+	.init           = magician_backlight_init,
+	.notify         = magician_backlight_notify,
+	.exit           = magician_backlight_exit,
 };
 
 static struct platform_device backlight = {
-	.name = "generic-bl",
+	.name = "pwm-backlight",
+	.id   = -1,
 	.dev  = {
-		.platform_data = &backlight_info,
+		.parent        = &pxa27x_device_pwm0.dev,
+		.platform_data = &backlight_data,
 	},
-	.id   = -1,
 };
 
 /*
  * LEDs
  */
 
-struct gpio_led gpio_leds[] = {
+static struct gpio_led gpio_leds[] = {
 	{
 		.name = "magician::vibra",
 		.default_trigger = "none",
@@ -490,6 +511,37 @@ static struct platform_device pasic3 = {
  * External power
  */
 
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+	ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+	ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN");
+	if (ret)
+		goto err_chg_en;
+	ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN");
+	if (!ret)
+		ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0);
+	if (ret)
+		goto err_nchg_en;
+
+	return 0;
+
+err_nchg_en:
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+err_chg_en:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+err_cs_usb:
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+err_cs_ac:
+	return ret;
+}
+
 static int magician_is_ac_online(void)
 {
 	return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC);
@@ -506,14 +558,24 @@ static void magician_set_charge(int flags)
 	gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags);
 }
 
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO30_MAGICIAN_nCHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CHARGE_EN);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB);
+	gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC);
+}
+
 static char *magician_supplicants[] = {
 	"ds2760-battery.0", "backup-battery"
 };
 
 static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
 	.is_ac_online    = magician_is_ac_online,
 	.is_usb_online   = magician_is_usb_online,
 	.set_charge      = magician_set_charge,
+	.exit            = power_supply_exit,
 	.supplied_to     = magician_supplicants,
 	.num_supplicants = ARRAY_SIZE(magician_supplicants),
 };
@@ -607,18 +669,10 @@ static struct pxamci_platform_data magician_mci_info = {
  * USB OHCI
  */
 
-static int magician_ohci_init(struct device *dev)
-{
-	UHCHR = (UHCHR | UHCHR_SSEP2 | UHCHR_PCPL | UHCHR_CGR) &
-	    ~(UHCHR_SSEP1 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data magician_ohci_info = {
-	.port_mode    = PMM_PERPORT_MODE,
-	.init         = magician_ohci_init,
-	.power_budget = 0,
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT3 | POWER_CONTROL_LOW,
+	.power_budget	= 0,
 };
 
 
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 7399fb3..f2c7ad8 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -23,15 +23,16 @@
 #include <linux/ioport.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
-#include <linux/backlight.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,17 +41,17 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/mainstone.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pxa27x_keypad.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/mainstone.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -110,9 +111,9 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO45_AC97_SYSCLK,
 
 	/* Keypad */
-	GPIO93_KP_DKIN_0	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO94_KP_DKIN_1	| WAKEUP_ON_LEVEL_HIGH,
-	GPIO95_KP_DKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO93_KP_DKIN_0,
+	GPIO94_KP_DKIN_1,
+	GPIO95_KP_DKIN_2,
 	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
 	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
@@ -161,8 +162,7 @@ static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
 		GEDR(0) = GPIO_bit(0);  /* clear useless edge notification */
 		if (likely(pending)) {
 			irq = MAINSTONE_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = MST_INTSETCLR & mainstone_irq_enabled;
 	} while (pending);
@@ -190,7 +190,7 @@ static void __init mainstone_init_irq(void)
 	MST_INTSETCLR = 0;
 
 	set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
-	set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
+	set_irq_type(IRQ_GPIO(0), IRQ_TYPE_EDGE_FALLING);
 }
 
 #ifdef CONFIG_PM
@@ -240,11 +240,19 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata mainstone_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &mainstone_smc91x_info,
+	},
 };
 
 static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
@@ -280,12 +288,6 @@ static pxa2xx_audio_ops_t mst_audio_ops = {
 	.resume		= mst_audio_resume,
 };
 
-static struct platform_device mst_audio_device = {
-	.name		= "pxa2xx-ac97",
-	.id		= -1,
-	.dev		= { .platform_data = &mst_audio_ops },
-};
-
 static struct resource flash_resources[] = {
 	[0] = {
 		.start	= PXA_CS0_PHYS,
@@ -349,56 +351,27 @@ static struct platform_device mst_flash_device[2] = {
 	},
 };
 
-#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
-static int mainstone_backlight_update_status(struct backlight_device *bl)
-{
-	int brightness = bl->props.brightness;
-
-	if (bl->props.power != FB_BLANK_UNBLANK ||
-	    bl->props.fb_blank != FB_BLANK_UNBLANK)
-		brightness = 0;
-
-	if (brightness != 0)
-		pxa_set_cken(CKEN_PWM0, 1);
-
-	PWM_CTRL0 = 0;
-	PWM_PWDUTY0 = brightness;
-	PWM_PERVAL0 = bl->props.max_brightness;
-
-	if (brightness == 0)
-		pxa_set_cken(CKEN_PWM0, 0);
-	return 0; /* pointless return value */
-}
-
-static int mainstone_backlight_get_brightness(struct backlight_device *bl)
-{
-	return PWM_PWDUTY0;
-}
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data mainstone_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
 
-static /*const*/ struct backlight_ops mainstone_backlight_ops = {
-	.update_status	= mainstone_backlight_update_status,
-	.get_brightness	= mainstone_backlight_get_brightness,
+static struct platform_device mainstone_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data = &mainstone_backlight_data,
+	},
 };
 
 static void __init mainstone_backlight_register(void)
 {
-	struct backlight_device *bl;
-
-	bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
-				       NULL, &mainstone_backlight_ops);
-	if (IS_ERR(bl)) {
-		printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
-		       PTR_ERR(bl));
-		return;
-	}
-
-	/*
-	 * broken design - register-then-setup interfaces are
-	 * utterly broken by definition.
-	 */
-	bl->props.max_brightness = 1023;
-	bl->props.brightness = 1023;
-	backlight_update_status(bl);
+	int ret = platform_device_register(&mainstone_backlight_device);
+	if (ret)
+		printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
 }
 #else
 #define mainstone_backlight_register()	do { } while (0)
@@ -490,6 +463,7 @@ static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
 	} else if (mode & IR_FIRMODE) {
 		MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
 	}
+	pxa2xx_transceiver_mode(dev, mode);
 	if (mode & IR_OFF) {
 		MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
 	} else {
@@ -528,28 +502,17 @@ static struct platform_device mst_gpio_keys_device = {
 
 static struct platform_device *platform_devices[] __initdata = {
 	&smc91x_device,
-	&mst_audio_device,
 	&mst_flash_device[0],
 	&mst_flash_device[1],
 	&mst_gpio_keys_device,
 };
 
-static int mainstone_ohci_init(struct device *dev)
-{
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
-	return 0;
-}
-
 static struct pxaohci_platform_data mainstone_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= mainstone_ohci_init,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int mainstone_matrix_keys[] = {
 	KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
 	KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
@@ -638,6 +601,7 @@ static void __init mainstone_init(void)
 	pxa_set_ficp_info(&mainstone_ficp_platform_data);
 	pxa_set_ohci_info(&mainstone_ohci_platform_data);
 	pxa_set_i2c_info(NULL);
+	pxa_set_ac97_info(&mst_audio_ops);
 
 	mainstone_init_keypad();
 }
diff --git a/arch/arm/mach-pxa/mfp-pxa2xx.c b/arch/arm/mach-pxa/mfp-pxa2xx.c
index 22097a1..2061c00 100644
--- a/arch/arm/mach-pxa/mfp-pxa2xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa2xx.c
@@ -18,13 +18,19 @@
 #include <linux/init.h>
 #include <linux/sysdev.h>
 
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa2xx.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
 
 #include "generic.h"
 
-#define PGSR(x)		__REG2(0x40F00020, ((x) & 0x60) >> 3)
+#define gpio_to_bank(gpio)	((gpio) >> 5)
+
+#define PGSR(x)		__REG2(0x40F00020, (x) << 2)
+#define __GAFR(u, x)	__REG2((u) ? 0x40E00058 : 0x40E00054, (x) << 3)
+#define GAFR_L(x)	__GAFR(0, x)
+#define GAFR_U(x)	__GAFR(1, x)
 
 #define PWER_WE35	(1 << 24)
 
@@ -37,41 +43,60 @@ struct gpio_desc {
 };
 
 static struct gpio_desc gpio_desc[MFP_PIN_GPIO127 + 1];
+static int gpio_nr;
+
+static unsigned long gpdr_lpm[4];
 
 static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 {
 	unsigned long gafr, mask = GPIO_bit(gpio);
-	int fn;
+	int bank = gpio_to_bank(gpio);
+	int uorl = !!(gpio & 0x10); /* GAFRx_U or GAFRx_L ? */
+	int shft = (gpio & 0xf) << 1;
+	int fn = MFP_AF(c);
+	int dir = c & MFP_DIR_OUT;
 
-	fn = MFP_AF(c);
 	if (fn > 3)
 		return -EINVAL;
 
-	/* alternate function and direction */
-	gafr = GAFR(gpio) & ~(0x3 << ((gpio & 0xf) * 2));
-	GAFR(gpio) = gafr |  (fn  << ((gpio & 0xf) * 2));
+	/* alternate function and direction at run-time */
+	gafr = (uorl == 0) ? GAFR_L(bank) : GAFR_U(bank);
+	gafr = (gafr & ~(0x3 << shft)) | (fn << shft);
+
+	if (uorl == 0)
+		GAFR_L(bank) = gafr;
+	else
+		GAFR_U(bank) = gafr;
 
-	if (c & MFP_DIR_OUT)
+	if (dir == MFP_DIR_OUT)
 		GPDR(gpio) |= mask;
 	else
 		GPDR(gpio) &= ~mask;
 
-	/* low power state */
+	/* alternate function and direction at low power mode */
 	switch (c & MFP_LPM_STATE_MASK) {
 	case MFP_LPM_DRIVE_HIGH:
-		PGSR(gpio) |= mask;
+		PGSR(bank) |= mask;
+		dir = MFP_DIR_OUT;
 		break;
 	case MFP_LPM_DRIVE_LOW:
-		PGSR(gpio) &= ~mask;
+		PGSR(bank) &= ~mask;
+		dir = MFP_DIR_OUT;
 		break;
-	case MFP_LPM_INPUT:
+	case MFP_LPM_DEFAULT:
 		break;
 	default:
-		pr_warning("%s: invalid low power state for GPIO%d\n",
+		/* warning and fall through, treat as MFP_LPM_DEFAULT */
+		pr_warning("%s: GPIO%d: unsupported low power mode\n",
 				__func__, gpio);
-		return -EINVAL;
+		break;
 	}
 
+	if (dir == MFP_DIR_OUT)
+		gpdr_lpm[bank] |= mask;
+	else
+		gpdr_lpm[bank] &= ~mask;
+
 	/* give early warning if MFP_LPM_CAN_WAKEUP is set on the
 	 * configurations of those pins not able to wakeup
 	 */
@@ -81,7 +106,7 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 		return -EINVAL;
 	}
 
-	if ((c & MFP_LPM_CAN_WAKEUP) && (c & MFP_DIR_OUT)) {
+	if ((c & MFP_LPM_CAN_WAKEUP) && (dir == MFP_DIR_OUT)) {
 		pr_warning("%s: output GPIO%d unable to wakeup\n",
 				__func__, gpio);
 		return -EINVAL;
@@ -90,6 +115,18 @@ static int __mfp_config_gpio(unsigned gpio, unsigned long c)
 	return 0;
 }
 
+static inline int __mfp_validate(int mfp)
+{
+	int gpio = mfp_to_gpio(mfp);
+
+	if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
+		pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+		return -1;
+	}
+
+	return gpio;
+}
+
 void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 {
 	unsigned long flags;
@@ -98,13 +135,9 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 
 	for (i = 0, c = mfp_cfgs; i < num; i++, c++) {
 
-		gpio = mfp_to_gpio(MFP_PIN(*c));
-
-		if (!gpio_desc[gpio].valid) {
-			pr_warning("%s: GPIO%d is invalid pin\n",
-				__func__, gpio);
+		gpio = __mfp_validate(MFP_PIN(*c));
+		if (gpio < 0)
 			continue;
-		}
 
 		local_irq_save(flags);
 
@@ -115,6 +148,24 @@ void pxa2xx_mfp_config(unsigned long *mfp_cfgs, int num)
 	}
 }
 
+void pxa2xx_mfp_set_lpm(int mfp, unsigned long lpm)
+{
+	unsigned long flags, c;
+	int gpio;
+
+	gpio = __mfp_validate(mfp);
+	if (gpio < 0)
+		return;
+
+	local_irq_save(flags);
+
+	c = gpio_desc[gpio].config;
+	c = (c & ~MFP_LPM_STATE_MASK) | lpm;
+	__mfp_config_gpio(gpio, c);
+
+	local_irq_restore(flags);
+}
+
 int gpio_set_wake(unsigned int gpio, unsigned int on)
 {
 	struct gpio_desc *d;
@@ -155,23 +206,22 @@ int gpio_set_wake(unsigned int gpio, unsigned int on)
 }
 
 #ifdef CONFIG_PXA25x
-static int __init pxa25x_mfp_init(void)
+static void __init pxa25x_mfp_init(void)
 {
 	int i;
 
-	if (cpu_is_pxa25x()) {
-		for (i = 0; i <= 84; i++)
-			gpio_desc[i].valid = 1;
+	for (i = 0; i <= 84; i++)
+		gpio_desc[i].valid = 1;
 
-		for (i = 0; i <= 15; i++) {
-			gpio_desc[i].can_wakeup = 1;
-			gpio_desc[i].mask = GPIO_bit(i);
-		}
+	for (i = 0; i <= 15; i++) {
+		gpio_desc[i].can_wakeup = 1;
+		gpio_desc[i].mask = GPIO_bit(i);
 	}
 
-	return 0;
+	gpio_nr = 85;
 }
-postcore_initcall(pxa25x_mfp_init);
+#else
+static inline void pxa25x_mfp_init(void) {}
 #endif /* CONFIG_PXA25x */
 
 #ifdef CONFIG_PXA27x
@@ -201,45 +251,106 @@ int keypad_set_wake(unsigned int on)
 	return 0;
 }
 
-static int __init pxa27x_mfp_init(void)
+static void __init pxa27x_mfp_init(void)
 {
 	int i, gpio;
 
-	if (cpu_is_pxa27x()) {
-		for (i = 0; i <= 120; i++) {
-			/* skip GPIO2, 5, 6, 7, 8, they are not
-			 * valid pins allow configuration
-			 */
-			if (i == 2 || i == 5 || i == 6 ||
-			    i == 7 || i == 8)
-				continue;
+	for (i = 0; i <= 120; i++) {
+		/* skip GPIO2, 5, 6, 7, 8, they are not
+		 * valid pins allow configuration
+		 */
+		if (i == 2 || i == 5 || i == 6 || i == 7 || i == 8)
+			continue;
 
-			gpio_desc[i].valid = 1;
-		}
+		gpio_desc[i].valid = 1;
+	}
 
-		/* Keypad GPIOs */
-		for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
-			gpio = pxa27x_pkwr_gpio[i];
-			gpio_desc[gpio].can_wakeup = 1;
-			gpio_desc[gpio].keypad_gpio = 1;
-			gpio_desc[gpio].mask = 1 << i;
-		}
+	/* Keypad GPIOs */
+	for (i = 0; i < ARRAY_SIZE(pxa27x_pkwr_gpio); i++) {
+		gpio = pxa27x_pkwr_gpio[i];
+		gpio_desc[gpio].can_wakeup = 1;
+		gpio_desc[gpio].keypad_gpio = 1;
+		gpio_desc[gpio].mask = 1 << i;
+	}
 
-		/* Overwrite GPIO13 as a PWER wakeup source */
-		for (i = 0; i <= 15; i++) {
-			/* skip GPIO2, 5, 6, 7, 8 */
-			if (GPIO_bit(i) & 0x1e4)
-				continue;
+	/* Overwrite GPIO13 as a PWER wakeup source */
+	for (i = 0; i <= 15; i++) {
+		/* skip GPIO2, 5, 6, 7, 8 */
+		if (GPIO_bit(i) & 0x1e4)
+			continue;
 
-			gpio_desc[i].can_wakeup = 1;
-			gpio_desc[i].mask = GPIO_bit(i);
-		}
+		gpio_desc[i].can_wakeup = 1;
+		gpio_desc[i].mask = GPIO_bit(i);
+	}
+
+	gpio_desc[35].can_wakeup = 1;
+	gpio_desc[35].mask = PWER_WE35;
+
+	gpio_nr = 121;
+}
+#else
+static inline void pxa27x_mfp_init(void) {}
+#endif /* CONFIG_PXA27x */
 
-		gpio_desc[35].can_wakeup = 1;
-		gpio_desc[35].mask = PWER_WE35;
+#ifdef CONFIG_PM
+static unsigned long saved_gafr[2][4];
+static unsigned long saved_gpdr[4];
+
+static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
+{
+	int i;
+
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+
+		saved_gafr[0][i] = GAFR_L(i);
+		saved_gafr[1][i] = GAFR_U(i);
+		saved_gpdr[i] = GPDR(i * 32);
+
+		GPDR(i * 32) = gpdr_lpm[i];
 	}
+	return 0;
+}
 
+static int pxa2xx_mfp_resume(struct sys_device *d)
+{
+	int i;
+
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++) {
+		GAFR_L(i) = saved_gafr[0][i];
+		GAFR_U(i) = saved_gafr[1][i];
+		GPDR(i * 32) = saved_gpdr[i];
+	}
+	PSSR = PSSR_RDH | PSSR_PH;
 	return 0;
 }
-postcore_initcall(pxa27x_mfp_init);
-#endif /* CONFIG_PXA27x */
+#else
+#define pxa2xx_mfp_suspend	NULL
+#define pxa2xx_mfp_resume	NULL
+#endif
+
+struct sysdev_class pxa2xx_mfp_sysclass = {
+	.name		= "mfp",
+	.suspend	= pxa2xx_mfp_suspend,
+	.resume		= pxa2xx_mfp_resume,
+};
+
+static int __init pxa2xx_mfp_init(void)
+{
+	int i;
+
+	if (!cpu_is_pxa2xx())
+		return 0;
+
+	if (cpu_is_pxa25x())
+		pxa25x_mfp_init();
+
+	if (cpu_is_pxa27x())
+		pxa27x_mfp_init();
+
+	/* initialize gafr_run[], pgsr_lpm[] from existing values */
+	for (i = 0; i <= gpio_to_bank(gpio_nr); i++)
+		gpdr_lpm[i] = GPDR(i * 32);
+
+	return sysdev_class_register(&pxa2xx_mfp_sysclass);
+}
+postcore_initcall(pxa2xx_mfp_init);
diff --git a/arch/arm/mach-pxa/mfp-pxa3xx.c b/arch/arm/mach-pxa/mfp-pxa3xx.c
index 3a5b0fc..eb197a6 100644
--- a/arch/arm/mach-pxa/mfp-pxa3xx.c
+++ b/arch/arm/mach-pxa/mfp-pxa3xx.c
@@ -19,10 +19,10 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa3xx.h>
-#include <asm/arch/pxa3xx-regs.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/mfp-pxa3xx.h>
+#include <mach/pxa3xx-regs.h>
 
 /* mfp_spin_lock is used to ensure that MFP register configuration
  * (most likely a read-modify-write operation) is atomic, and that
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
new file mode 100644
index 0000000..0842c53
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -0,0 +1,905 @@
+/*
+ * Handles the Mitac Mio A701 Board
+ *
+ * Copyright (C) 2008 Robert Jarzmik
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/gpio_keys.h>
+#include <linux/pwm_backlight.h>
+#include <linux/rtc.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pda_power.h>
+#include <linux/power_supply.h>
+#include <linux/wm97xx.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/pxa27x-udc.h>
+
+#include <mach/mioa701.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned long mioa701_pin_config[] = {
+	/* Mio global */
+	MIO_CFG_OUT(GPIO9_CHARGE_nEN, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO18_POWEROFF, AF0, DRIVE_LOW),
+	MFP_CFG_OUT(GPIO3, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO4, AF0, DRIVE_HIGH),
+
+	/* Backlight PWM 0 */
+	GPIO16_PWM0_OUT,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	MIO_CFG_IN(GPIO78_SDIO_RO, AF0),
+	MIO_CFG_IN(GPIO15_SDIO_INSERT, AF0),
+	MIO_CFG_OUT(GPIO91_SDIO_EN, AF0, DRIVE_LOW),
+
+	/* USB */
+	MIO_CFG_IN(GPIO13_USB_DETECT, AF0),
+	MIO_CFG_OUT(GPIO22_USB_ENABLE, AF0, DRIVE_LOW),
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* Bluetooth */
+	GPIO44_BTUART_CTS,
+	GPIO42_BTUART_RXD,
+	GPIO45_BTUART_RTS,
+	GPIO43_BTUART_TXD,
+	MIO_CFG_OUT(GPIO83_BT_ON, AF0, DRIVE_LOW),
+
+	/* GPS */
+	MIO_CFG_OUT(GPIO23_GPS_UNKNOWN1, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO26_GPS_ON, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO27_GPS_RESET, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO106_GPS_UNKNOWN2, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO107_GPS_UNKNOWN3, AF0, DRIVE_LOW),
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+
+	/* GSM */
+	MIO_CFG_OUT(GPIO24_GSM_MOD_RESET_CMD, AF0, DRIVE_LOW),
+	MIO_CFG_OUT(GPIO88_GSM_nMOD_ON_CMD, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO90_GSM_nMOD_OFF_CMD, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO114_GSM_nMOD_DTE_UART_STATE, AF0, DRIVE_HIGH),
+	MIO_CFG_IN(GPIO25_GSM_MOD_ON_STATE, AF0),
+	MIO_CFG_IN(GPIO113_GSM_EVENT, AF0) | WAKEUP_ON_EDGE_BOTH,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+	GPIO36_FFUART_DCD,
+	GPIO37_FFUART_DSR,
+	GPIO39_FFUART_TXD,
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+
+	/* Sound */
+	GPIO89_AC97_SYSCLK,
+	MIO_CFG_IN(GPIO12_HPJACK_INSERT, AF0),
+
+	/* Leds */
+	MIO_CFG_OUT(GPIO10_LED_nCharging, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO97_LED_nBlue, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO98_LED_nOrange, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO82_LED_nVibra, AF0, DRIVE_HIGH),
+	MIO_CFG_OUT(GPIO115_LED_nKeyboard, AF0, DRIVE_HIGH),
+
+	/* Keyboard */
+	MIO_CFG_IN(GPIO0_KEY_POWER, AF0) | WAKEUP_ON_EDGE_BOTH,
+	MIO_CFG_IN(GPIO93_KEY_VOLUME_UP, AF0),
+	MIO_CFG_IN(GPIO94_KEY_VOLUME_DOWN, AF0),
+	GPIO100_KP_MKIN_0,
+	GPIO101_KP_MKIN_1,
+	GPIO102_KP_MKIN_2,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* Unknown */
+	MFP_CFG_IN(GPIO14, AF0),
+	MFP_CFG_IN(GPIO20, AF0),
+	MFP_CFG_IN(GPIO21, AF0),
+	MFP_CFG_IN(GPIO33, AF0),
+	MFP_CFG_OUT(GPIO49, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO57, AF0, DRIVE_HIGH),
+	MFP_CFG_OUT(GPIO77, AF0, DRIVE_HIGH),
+	MFP_CFG_IN(GPIO80, AF0),
+	MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH),
+	MFP_CFG_IN(GPIO96, AF0),
+	MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH),
+};
+
+#define MIO_GPIO_IN(num, _desc) \
+	{ .gpio = (num), .dir = 0, .desc = (_desc) }
+#define MIO_GPIO_OUT(num, _init, _desc) \
+	{ .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) }
+struct gpio_ress {
+	unsigned gpio : 8;
+	unsigned dir : 1;
+	unsigned init : 1;
+	char *desc;
+};
+
+static int mio_gpio_request(struct gpio_ress *gpios, int size)
+{
+	int i, rc = 0;
+	int gpio;
+	int dir;
+
+	for (i = 0; (!rc) && (i < size); i++) {
+		gpio = gpios[i].gpio;
+		dir = gpios[i].dir;
+		rc = gpio_request(gpio, gpios[i].desc);
+		if (rc) {
+			printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n",
+			       gpio, gpios[i].desc, rc);
+			continue;
+		}
+		if (dir)
+			gpio_direction_output(gpio, gpios[i].init);
+		else
+			gpio_direction_input(gpio);
+	}
+	while ((rc) && (--i >= 0))
+		gpio_free(gpios[i].gpio);
+	return rc;
+}
+
+static void mio_gpio_free(struct gpio_ress *gpios, int size)
+{
+	int i;
+
+	for (i = 0; i < size; i++)
+		gpio_free(gpios[i].gpio);
+}
+
+/* LCD Screen and Backlight */
+static struct platform_pwm_backlight_data mioa701_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 50,
+	.pwm_period_ns	= 4000 * 1024,	/* Fl = 250kHz */
+};
+
+/*
+ * LTM0305A776C LCD panel timings
+ *
+ * see:
+ *  - the LTM0305A776C datasheet,
+ *  - and the PXA27x Programmers' manual
+ */
+static struct pxafb_mode_info mioa701_ltm0305a776c = {
+	.pixclock		= 220000,	/* CLK=4.545 MHz */
+	.xres			= 240,
+	.yres			= 320,
+	.bpp			= 16,
+	.hsync_len		= 4,
+	.vsync_len		= 2,
+	.left_margin		= 6,
+	.right_margin		= 4,
+	.upper_margin		= 5,
+	.lower_margin		= 3,
+};
+
+static void mioa701_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+	gpio_set_value(GPIO87_LCD_POWER, on);
+}
+
+static struct pxafb_mach_info mioa701_pxafb_info = {
+	.modes			= &mioa701_ltm0305a776c,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= mioa701_lcd_power,
+};
+
+/*
+ * Keyboard configuration
+ */
+static unsigned int mioa701_matrix_keys[] = {
+	KEY(0, 0, KEY_UP),
+	KEY(0, 1, KEY_RIGHT),
+	KEY(0, 2, KEY_MEDIA),
+	KEY(1, 0, KEY_DOWN),
+	KEY(1, 1, KEY_ENTER),
+	KEY(1, 2, KEY_CONNECT),	/* GPS key */
+	KEY(2, 0, KEY_LEFT),
+	KEY(2, 1, KEY_PHONE),	/* Phone Green key */
+	KEY(2, 2, KEY_CAMERA)	/* Camera key */
+};
+static struct pxa27x_keypad_platform_data mioa701_keypad_info = {
+	.matrix_key_rows = 3,
+	.matrix_key_cols = 3,
+	.matrix_key_map = mioa701_matrix_keys,
+	.matrix_key_map_size = ARRAY_SIZE(mioa701_matrix_keys),
+};
+
+/*
+ * GPIO Key Configuration
+ */
+#define MIO_KEY(key, _gpio, _desc, _wakeup) \
+	{ .code = (key), .gpio = (_gpio), .active_low = 0, \
+	.desc = (_desc), .type = EV_KEY, .wakeup = (_wakeup) }
+static struct gpio_keys_button mioa701_button_table[] = {
+	MIO_KEY(KEY_EXIT, GPIO0_KEY_POWER, "Power button", 1),
+	MIO_KEY(KEY_VOLUMEUP, GPIO93_KEY_VOLUME_UP, "Volume up", 0),
+	MIO_KEY(KEY_VOLUMEDOWN, GPIO94_KEY_VOLUME_DOWN, "Volume down", 0),
+	MIO_KEY(KEY_HP, GPIO12_HPJACK_INSERT, "HP jack detect", 0)
+};
+
+static struct gpio_keys_platform_data mioa701_gpio_keys_data = {
+	.buttons  = mioa701_button_table,
+	.nbuttons = ARRAY_SIZE(mioa701_button_table),
+};
+
+/*
+ * Leds and vibrator
+ */
+#define ONE_LED(_gpio, _name) \
+{ .gpio = (_gpio), .name = (_name), .active_low = true }
+static struct gpio_led gpio_leds[] = {
+	ONE_LED(GPIO10_LED_nCharging, "mioa701:charging"),
+	ONE_LED(GPIO97_LED_nBlue, "mioa701:blue"),
+	ONE_LED(GPIO98_LED_nOrange, "mioa701:orange"),
+	ONE_LED(GPIO82_LED_nVibra, "mioa701:vibra"),
+	ONE_LED(GPIO115_LED_nKeyboard, "mioa701:keyboard")
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds = gpio_leds,
+	.num_leds = ARRAY_SIZE(gpio_leds),
+};
+
+/*
+ * GSM Sagem XS200 chip
+ *
+ * GSM handling was purged from kernel. For history, this is the way to go :
+ *   - init : GPIO24_GSM_MOD_RESET_CMD = 0, GPIO114_GSM_nMOD_DTE_UART_STATE = 1
+ *            GPIO88_GSM_nMOD_ON_CMD = 1, GPIO90_GSM_nMOD_OFF_CMD = 1
+ *   - reset : GPIO24_GSM_MOD_RESET_CMD = 1, msleep(100),
+ *             GPIO24_GSM_MOD_RESET_CMD = 0
+ *   - turn on  : GPIO88_GSM_nMOD_ON_CMD = 0, msleep(1000),
+ *                GPIO88_GSM_nMOD_ON_CMD = 1
+ *   - turn off : GPIO90_GSM_nMOD_OFF_CMD = 0, msleep(1000),
+ *                GPIO90_GSM_nMOD_OFF_CMD = 1
+ */
+static int is_gsm_on(void)
+{
+	int is_on;
+
+	is_on = !!gpio_get_value(GPIO25_GSM_MOD_ON_STATE);
+	return is_on;
+}
+
+irqreturn_t gsm_on_irq(int irq, void *p)
+{
+	printk(KERN_DEBUG "Mioa701: GSM status changed to %s\n",
+	       is_gsm_on() ? "on" : "off");
+	return IRQ_HANDLED;
+}
+
+struct gpio_ress gsm_gpios[] = {
+	MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"),
+	MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"),
+};
+
+static int __init gsm_init(void)
+{
+	int rc;
+
+	rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios));
+	if (rc)
+		goto err_gpio;
+	rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq,
+			 IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			 "GSM XS200 Power Irq", NULL);
+	if (rc)
+		goto err_irq;
+
+	gpio_set_wake(GPIO113_GSM_EVENT, 1);
+	return 0;
+
+err_irq:
+	printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n");
+	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+err_gpio:
+	printk(KERN_ERR "Mioa701: gsm not available\n");
+	return rc;
+}
+
+static void gsm_exit(void)
+{
+	free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL);
+	mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios));
+}
+
+/*
+ * Bluetooth BRF6150 chip
+ *
+ * BT handling was purged from kernel. For history, this is the way to go :
+ * - turn on  : GPIO83_BT_ON = 1
+ * - turn off : GPIO83_BT_ON = 0
+ */
+
+/*
+ * GPS Sirf Star III chip
+ *
+ * GPS handling was purged from kernel. For history, this is the way to go :
+ * - init : GPIO23_GPS_UNKNOWN1 = 1, GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ *          GPIO106_GPS_UNKNOWN2 = 0, GPIO107_GPS_UNKNOWN3 = 0
+ * - turn on  : GPIO27_GPS_RESET = 1, GPIO26_GPS_ON = 1
+ * - turn off : GPIO26_GPS_ON = 0, GPIO27_GPS_RESET = 0
+ */
+
+/*
+ * USB UDC
+ */
+static void udc_power_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		gpio_set_value(GPIO22_USB_ENABLE, 0);
+		break;
+	case PXA2XX_UDC_CMD_CONNECT:
+		gpio_set_value(GPIO22_USB_ENABLE, 1);
+		break;
+	default:
+		printk(KERN_INFO "udc_control: unknown command (0x%x)!\n", cmd);
+		break;
+	}
+}
+
+static int is_usb_connected(void)
+{
+	return !!gpio_get_value(GPIO13_USB_DETECT);
+}
+
+static struct pxa2xx_udc_mach_info mioa701_udc_info = {
+	.udc_is_connected = is_usb_connected,
+	.udc_command	  = udc_power_command,
+};
+
+struct gpio_ress udc_gpios[] = {
+	MIO_GPIO_OUT(GPIO22_USB_ENABLE, 0, "USB Vbus enable")
+};
+
+static int __init udc_init(void)
+{
+	pxa_set_udc_info(&mioa701_udc_info);
+	return mio_gpio_request(ARRAY_AND_SIZE(udc_gpios));
+}
+
+static void udc_exit(void)
+{
+	mio_gpio_free(ARRAY_AND_SIZE(udc_gpios));
+}
+
+/*
+ * SDIO/MMC Card controller
+ */
+static void mci_setpower(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+
+	if ((1 << vdd) & p_d->ocr_mask)
+		gpio_set_value(GPIO91_SDIO_EN, 1);	/* enable SDIO power */
+	else
+		gpio_set_value(GPIO91_SDIO_EN, 0);	/* disable SDIO power */
+}
+
+static int mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO78_SDIO_RO);
+}
+
+struct gpio_ress mci_gpios[] = {
+	MIO_GPIO_IN(GPIO78_SDIO_RO, 	"SDIO readonly detect"),
+	MIO_GPIO_IN(GPIO15_SDIO_INSERT,	"SDIO insertion detect"),
+	MIO_GPIO_OUT(GPIO91_SDIO_EN, 0,	"SDIO power enable")
+};
+
+static void mci_exit(struct device *dev, void *data)
+{
+	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+	free_irq(gpio_to_irq(GPIO15_SDIO_INSERT), data);
+}
+
+static struct pxamci_platform_data mioa701_mci_info;
+
+/**
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+static int mci_init(struct device *dev, irq_handler_t detect_int, void *data)
+{
+	int rc;
+	int irq = gpio_to_irq(GPIO15_SDIO_INSERT);
+
+	rc = mio_gpio_request(ARRAY_AND_SIZE(mci_gpios));
+	if (rc)
+		goto err_gpio;
+	/* enable RE/FE interrupt on card insertion and removal */
+	rc = request_irq(irq, detect_int,
+			 IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			 IRQF_TRIGGER_FALLING,
+			 "MMC card detect", data);
+	if (rc)
+		goto err_irq;
+
+	mioa701_mci_info.detect_delay = msecs_to_jiffies(250);
+	return 0;
+
+err_irq:
+	dev_err(dev, "mioa701_mci_init: MMC/SD:"
+		" can't request MMC card detect IRQ\n");
+	mio_gpio_free(ARRAY_AND_SIZE(mci_gpios));
+err_gpio:
+	return rc;
+}
+
+static struct pxamci_platform_data mioa701_mci_info = {
+	.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
+	.init	  = mci_init,
+	.get_ro	  = mci_get_ro,
+	.setpower = mci_setpower,
+	.exit	  = mci_exit,
+};
+
+/* FlashRAM */
+static struct resource strataflash_resource = {
+	.start = PXA_CS0_PHYS,
+	.end   = PXA_CS0_PHYS + SZ_64M - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct physmap_flash_data strataflash_data = {
+	.width = 2,
+	/* .set_vpp = mioa701_set_vpp, */
+};
+
+static struct platform_device strataflash = {
+	.name	       = "physmap-flash",
+	.id	       = -1,
+	.resource      = &strataflash_resource,
+	.num_resources = 1,
+	.dev = {
+		.platform_data = &strataflash_data,
+	},
+};
+
+/*
+ * Suspend/Resume bootstrap management
+ *
+ * MIO A701 reboot sequence is highly ROM dependant. From the one dissassembled,
+ * this sequence is as follows :
+ *   - disables interrupts
+ *   - initialize SDRAM (self refresh RAM into active RAM)
+ *   - initialize GPIOs (depends on value at 0xa020b020)
+ *   - initialize coprossessors
+ *   - if edge detect on PWR_SCL(GPIO3), then proceed to cold start
+ *   - or if value at 0xa020b000 not equal to 0x0f0f0f0f, proceed to cold start
+ *   - else do a resume, ie. jump to addr 0xa0100000
+ */
+#define RESUME_ENABLE_ADDR	0xa020b000
+#define RESUME_ENABLE_VAL	0x0f0f0f0f
+#define RESUME_BT_ADDR		0xa020b020
+#define RESUME_UNKNOWN_ADDR	0xa020b024
+#define RESUME_VECTOR_ADDR	0xa0100000
+#define BOOTSTRAP_WORDS		mioa701_bootstrap_lg/4
+
+static u32 *save_buffer;
+
+static void install_bootstrap(void)
+{
+	int i;
+	u32 *rom_bootstrap  = phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *src = &mioa701_bootstrap;
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		rom_bootstrap[i] = src[i];
+}
+
+
+static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	int i = 0, is_bt_on;
+	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
+	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+	/* Devices prepare suspend */
+	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
+			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		save_buffer[i] = mem_resume_vector[i];
+	save_buffer[i++] = *mem_resume_enabler;
+	save_buffer[i++] = *mem_resume_bt;
+	save_buffer[i++] = *mem_resume_unknown;
+
+	*mem_resume_enabler = RESUME_ENABLE_VAL;
+	*mem_resume_bt	    = is_bt_on;
+
+	install_bootstrap();
+	return 0;
+}
+
+static int mioa701_sys_resume(struct sys_device *sysdev)
+{
+	int i = 0;
+	u32 *mem_resume_vector	= phys_to_virt(RESUME_VECTOR_ADDR);
+	u32 *mem_resume_enabler = phys_to_virt(RESUME_ENABLE_ADDR);
+	u32 *mem_resume_bt	= phys_to_virt(RESUME_BT_ADDR);
+	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
+
+	for (i = 0; i < BOOTSTRAP_WORDS; i++)
+		mem_resume_vector[i] = save_buffer[i];
+	*mem_resume_enabler = save_buffer[i++];
+	*mem_resume_bt	    = save_buffer[i++];
+	*mem_resume_unknown = save_buffer[i++];
+
+	return 0;
+}
+
+static struct sysdev_class mioa701_sysclass = {
+	.name = "mioa701",
+};
+
+static struct sys_device sysdev_bootstrap = {
+	.cls		= &mioa701_sysclass,
+};
+
+static struct sysdev_driver driver_bootstrap = {
+	.suspend	= &mioa701_sys_suspend,
+	.resume		= &mioa701_sys_resume,
+};
+
+static int __init bootstrap_init(void)
+{
+	int rc;
+	int save_size = mioa701_bootstrap_lg + (sizeof(u32) * 3);
+
+	rc = sysdev_class_register(&mioa701_sysclass);
+	if (rc) {
+		printk(KERN_ERR "Failed registering mioa701 sys class\n");
+		return -ENODEV;
+	}
+	rc = sysdev_register(&sysdev_bootstrap);
+	if (rc) {
+		printk(KERN_ERR "Failed registering mioa701 sys device\n");
+		return -ENODEV;
+	}
+	rc = sysdev_driver_register(&mioa701_sysclass, &driver_bootstrap);
+	if (rc) {
+		printk(KERN_ERR "Failed registering PMU sys driver\n");
+		return -ENODEV;
+	}
+
+	save_buffer = kmalloc(save_size, GFP_KERNEL);
+	if (!save_buffer)
+		return -ENOMEM;
+	printk(KERN_INFO "MioA701: allocated %d bytes for bootstrap\n",
+	       save_size);
+	return 0;
+}
+
+static void bootstrap_exit(void)
+{
+	kfree(save_buffer);
+	sysdev_driver_unregister(&mioa701_sysclass, &driver_bootstrap);
+	sysdev_unregister(&sysdev_bootstrap);
+	sysdev_class_unregister(&mioa701_sysclass);
+
+	printk(KERN_CRIT "Unregistering mioa701 suspend will hang next"
+	       "resume !!!\n");
+}
+
+/*
+ * Power Supply
+ */
+static char *supplicants[] = {
+	"mioa701_battery"
+};
+
+static void mioa701_set_charge(int flags)
+{
+	gpio_set_value(GPIO9_CHARGE_nEN, !flags);
+}
+
+static struct pda_power_pdata power_pdata = {
+	.is_ac_online	= is_usb_connected,
+	.set_charge = mioa701_set_charge,
+	.supplied_to = supplicants,
+	.num_supplicants = ARRAY_SIZE(supplicants),
+};
+
+static struct resource power_resources[] = {
+	[0] = {
+		.name	= "ac",
+		.start	= gpio_to_irq(GPIO13_USB_DETECT),
+		.end	= gpio_to_irq(GPIO13_USB_DETECT),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE |
+		IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device power_dev = {
+	.name		= "pda-power",
+	.id		= -1,
+	.resource	= power_resources,
+	.num_resources	= ARRAY_SIZE(power_resources),
+	.dev = {
+		.platform_data	= &power_pdata,
+	},
+};
+
+#if defined(CONFIG_PDA_POWER) && defined(CONFIG_TOUCHSCREEN_WM97XX)
+static struct wm97xx *battery_wm;
+
+static enum power_supply_property battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN,	/* Necessary for apm */
+};
+
+static int get_battery_voltage(void)
+{
+	int adc = -1;
+
+	if (battery_wm)
+		adc = wm97xx_read_aux_adc(battery_wm, WM97XX_AUX_ID1);
+	return adc;
+}
+
+static int get_battery_status(struct power_supply *b)
+{
+	int status;
+
+	if (is_usb_connected())
+		status = POWER_SUPPLY_STATUS_CHARGING;
+	else
+		status = POWER_SUPPLY_STATUS_DISCHARGING;
+
+	return status;
+}
+
+static int get_property(struct power_supply *b,
+			enum power_supply_property psp,
+			union power_supply_propval *val)
+{
+	int rc = 0;
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		val->intval = get_battery_status(b);
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MAX_DESIGN:
+		val->intval = 0xfd0;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_MIN_DESIGN:
+		val->intval = 0xc00;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		val->intval = get_battery_voltage();
+		break;
+	case POWER_SUPPLY_PROP_CHARGE_FULL_DESIGN:
+		val->intval = 100;
+		break;
+	default:
+		val->intval = -1;
+		rc = -1;
+	}
+
+	return rc;
+};
+
+static struct power_supply battery_ps = {
+	.name = "mioa701_battery",
+	.type = POWER_SUPPLY_TYPE_BATTERY,
+	.get_property = get_property,
+	.properties = battery_props,
+	.num_properties = ARRAY_SIZE(battery_props),
+};
+
+static int battery_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+	int rc;
+
+	battery_wm = wm;
+
+	rc = power_supply_register(NULL, &battery_ps);
+	if (rc)
+		dev_err(&pdev->dev,
+		"Could not register mioa701 battery -> %d\n", rc);
+	return rc;
+}
+
+static int battery_remove(struct platform_device *pdev)
+{
+	battery_wm = NULL;
+	return 0;
+}
+
+static struct platform_driver mioa701_battery_driver = {
+	.driver = {
+		.name = "wm97xx-battery",
+	},
+	.probe = battery_probe,
+	.remove = battery_remove
+};
+
+static int __init mioa701_battery_init(void)
+{
+	int rc;
+
+	rc = platform_driver_register(&mioa701_battery_driver);
+	if (rc)
+		printk(KERN_ERR "Could not register mioa701 battery driver\n");
+	return rc;
+}
+
+#else
+static int __init mioa701_battery_init(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * Mio global
+ */
+
+/* Devices */
+#define MIO_PARENT_DEV(var, strname, tparent, pdata)	\
+static struct platform_device var = {			\
+	.name		= strname,			\
+	.id		= -1,				\
+	.dev		= {				\
+		.platform_data = pdata,			\
+		.parent	= tparent,			\
+	},						\
+};
+#define MIO_SIMPLE_DEV(var, strname, pdata)	\
+	MIO_PARENT_DEV(var, strname, NULL, pdata)
+
+MIO_SIMPLE_DEV(mioa701_gpio_keys, "gpio-keys",	    &mioa701_gpio_keys_data)
+MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight",  &pxa27x_device_pwm0.dev,
+		&mioa701_backlight_data);
+MIO_SIMPLE_DEV(mioa701_led,	  "leds-gpio",	    &gpio_led_info)
+MIO_SIMPLE_DEV(pxa2xx_pcm,	  "pxa2xx-pcm",	    NULL)
+MIO_SIMPLE_DEV(pxa2xx_ac97,	  "pxa2xx-ac97",    NULL)
+MIO_PARENT_DEV(mio_wm9713_codec,  "wm9713-codec",   &pxa2xx_ac97.dev, NULL)
+MIO_SIMPLE_DEV(mioa701_sound,	  "mioa701-wm9713", NULL)
+MIO_SIMPLE_DEV(mioa701_board,	  "mioa701-board",  NULL)
+
+static struct platform_device *devices[] __initdata = {
+	&mioa701_gpio_keys,
+	&mioa701_backlight,
+	&mioa701_led,
+	&pxa2xx_pcm,
+	&pxa2xx_ac97,
+	&mio_wm9713_codec,
+	&mioa701_sound,
+	&power_dev,
+	&strataflash,
+	&mioa701_board
+};
+
+static void mioa701_machine_exit(void);
+
+static void mioa701_poweroff(void)
+{
+	mioa701_machine_exit();
+	gpio_set_value(GPIO18_POWEROFF, 1);
+}
+
+static void mioa701_restart(char c)
+{
+	mioa701_machine_exit();
+	arm_machine_restart(c);
+}
+
+struct gpio_ress global_gpios[] = {
+	MIO_GPIO_OUT(GPIO9_CHARGE_nEN, 1, "Charger enable"),
+	MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"),
+	MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power")
+};
+
+static void __init mioa701_machine_init(void)
+{
+	PSLR  = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */
+	PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE;
+	RTTR = 32768 - 1; /* Reset crazy WinCE value */
+	UP2OCR = UP2OCR_HXOE;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
+	bootstrap_init();
+	set_pxa_fb_info(&mioa701_pxafb_info);
+	pxa_set_mci_info(&mioa701_mci_info);
+	pxa_set_keypad_info(&mioa701_keypad_info);
+	udc_init();
+	pm_power_off = mioa701_poweroff;
+	arm_pm_restart = mioa701_restart;
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+	gsm_init();
+	mioa701_battery_init();
+}
+
+static void mioa701_machine_exit(void)
+{
+	udc_exit();
+	bootstrap_exit();
+	gsm_exit();
+}
+
+MACHINE_START(MIOA701, "MIO A701")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= &pxa_map_io,
+	.init_irq	= &pxa27x_init_irq,
+	.init_machine	= mioa701_machine_init,
+	.timer		= &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/mioa701_bootresume.S b/arch/arm/mach-pxa/mioa701_bootresume.S
new file mode 100644
index 0000000..a647693
--- /dev/null
+++ b/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -0,0 +1,36 @@
+/* Bootloader to resume MIO A701
+ *
+ * 2007-1-12 Robert Jarzmik
+ *
+ * This code is licenced under the GPLv2.
+*/
+
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+/*
+ * Note: Yes, part of the following code is located into the .data section.
+ *       This is to allow jumpaddr to be accessed with a relative load
+ *       while we can't rely on any MMU translation.  We could have put
+ *       sleep_save_sp in the .text section as well, but some setups might
+ *       insist on it to be truly read-only.
+ */
+	.data
+ENTRY(mioa701_bootstrap)
+0:
+	b	1f
+ENTRY(mioa701_jumpaddr)
+	.word	0x40f00008		@ PSPR in no-MMU mode
+1:
+	mov	r0,     #0xa0000000	@ Don't suppose memory access works
+	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	mov	r1, #0
+	str	r1, [r0]		@ Early disable resume for next boot
+	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)
+	ldr	r0, [r0]
+	mov	pc, r0
+2:
+
+ENTRY(mioa701_bootstrap_lg)
+	.data
+	.word	2b-0b
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
new file mode 100644
index 0000000..8a73814
--- /dev/null
+++ b/arch/arm/mach-pxa/mp900.c
@@ -0,0 +1,100 @@
+/*
+ *  linux/arch/arm/mach-pxa/mp900.c
+ *
+ *  Support for the NEC MobilePro900/C platform
+ *
+ *  Based on mach-pxa/gumstix.c
+ *
+ *  2007, 2008 Kristoffer Ericson <kristoffer.ericson@gmail.com>
+ *  2007, 2008 Michael Petchkovsky <mkpetch@internode.on.net>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+#include <linux/usb/isp116x.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include "generic.h"
+
+static void isp116x_pfm_delay(struct device *dev, int delay)
+{
+
+	/* 400Mhz PXA2 = 2.5ns / instruction */
+
+	int cyc = delay / 10;
+
+	/* 4 Instructions = 4 x 2.5ns = 10ns */
+	__asm__ volatile ("0:\n"
+		"subs %0, %1, #1\n"
+		"bge 0b\n"
+		:"=r" (cyc)
+		:"0"(cyc)
+	);
+}
+
+static struct isp116x_platform_data isp116x_pfm_data = {
+	.remote_wakeup_enable = 1,
+	.delay = isp116x_pfm_delay,
+};
+
+static struct resource isp116x_pfm_resources[] = {
+	[0] =	{
+		.start	= 0x0d000000,
+		.end	= 0x0d000000 + 1,
+		.flags	= IORESOURCE_MEM,
+		},
+	[1] =	{
+		.start  = 0x0d000000 + 4,
+		.end	= 0x0d000000 + 5,
+		.flags  = IORESOURCE_MEM,
+		},
+	[2] =	{
+		.start	= 61,
+		.end	= 61,
+		.flags	= IORESOURCE_IRQ,
+		},
+};
+
+static struct platform_device mp900c_dummy_device = {
+	.name		= "mp900c_dummy",
+	.id		= -1,
+};
+
+static struct platform_device mp900c_usb = {
+	.name		= "isp116x-hcd",
+	.num_resources	= ARRAY_SIZE(isp116x_pfm_resources),
+	.resource	= isp116x_pfm_resources,
+	.dev.platform_data = &isp116x_pfm_data,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&mp900c_dummy_device,
+	&mp900c_usb,
+};
+
+static void __init mp900c_init(void)
+{
+	printk(KERN_INFO "MobilePro 900/C machine init\n");
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+/* Maintainer - Michael Petchkovsky <mkpetch@internode.on.net> */
+MACHINE_START(NEC_MP900, "MobilePro900/C")
+	.phys_io	= 0x40000000,
+	.boot_params	= 0xa0220100,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.timer		= &pxa_timer,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa25x_init_irq,
+	.init_machine	= mp900c_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
new file mode 100644
index 0000000..4447711
--- /dev/null
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -0,0 +1,436 @@
+/*
+ * Hardware definitions for PalmTX
+ *
+ * Author:     Marek Vasut <marek.vasut@gmail.com>
+ *
+ * Based on work of:
+ *		Alex Osborne <ato@meshy.org>
+ *		Cristiano P. <cristianop@users.sourceforge.net>
+ *		Jan Herman <2hp@seznam.cz>
+ *		Michal Hrusecky
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/wm97xx_batt.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmtx.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmtx_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO13_GPIO,
+
+	/* PCMCIA */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmtx_mci_init(struct device *dev, irq_handler_t palmtx_detect_int,
+				void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = request_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, palmtx_detect_int,
+			IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		return err;
+	}
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_POWER, "SD_POWER");
+	if (err)
+		goto pwr_err;
+
+	err = gpio_request(GPIO_NR_PALMTX_SD_READONLY, "SD_READONLY");
+	if (err)
+		goto ro_err;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+ro_err:
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+pwr_err:
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+	return err;
+}
+
+static void palmtx_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMTX_SD_READONLY);
+	gpio_free(GPIO_NR_PALMTX_SD_POWER);
+	free_irq(IRQ_GPIO_PALMTX_SD_DETECT_N, data);
+}
+
+static void palmtx_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	gpio_set_value(GPIO_NR_PALMTX_SD_POWER, p_d->ocr_mask & (1 << vdd));
+}
+
+static int palmtx_mci_get_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_SD_READONLY);
+}
+
+static struct pxamci_platform_data palmtx_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmtx_mci_power,
+	.get_ro		= palmtx_mci_get_ro,
+	.init 		= palmtx_mci_init,
+	.exit		= palmtx_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmtx_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+
+};
+
+static struct pxa27x_keypad_platform_data palmtx_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmtx_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmtx_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * GPIO keys
+ ******************************************************************************/
+static struct gpio_keys_button palmtx_pxa_buttons[] = {
+	{KEY_F8, GPIO_NR_PALMTX_HOTSYNC_BUTTON_N, 1, "HotSync Button" },
+};
+
+static struct gpio_keys_platform_data palmtx_pxa_keys_data = {
+	.buttons	= palmtx_pxa_buttons,
+	.nbuttons	= ARRAY_SIZE(palmtx_pxa_buttons),
+};
+
+static struct platform_device palmtx_pxa_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &palmtx_pxa_keys_data,
+	},
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmtx_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_request(GPIO_NR_PALMTX_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+
+	return 0;
+err2:
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmtx_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmtx_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_BL_POWER);
+	gpio_free(GPIO_NR_PALMTX_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmtx_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMTX_MAX_INTENSITY,
+	.dft_brightness	= PALMTX_MAX_INTENSITY,
+	.pwm_period_ns	= PALMTX_PERIOD_NS,
+	.init		= palmtx_backlight_init,
+	.notify		= palmtx_backlight_notify,
+	.exit		= palmtx_backlight_exit,
+};
+
+static struct platform_device palmtx_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmtx_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static void palmtx_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMTX_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmtx_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= palmtx_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * UDC
+ ******************************************************************************/
+static void palmtx_udc_command(int cmd)
+{
+	gpio_set_value(GPIO_NR_PALMTX_USB_POWER, !cmd);
+	udelay(50);
+	gpio_set_value(GPIO_NR_PALMTX_USB_PULLUP, !cmd);
+}
+
+static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_PALMTX_USB_DETECT_N,
+	.gpio_vbus_inverted	= 1,
+	.udc_command		= palmtx_udc_command,
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMTX_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err_cs_ac;
+
+	ret = gpio_request(GPIO_NR_PALMTX_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err_cs_usb;
+
+	return 0;
+
+err_cs_usb:
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+err_cs_ac:
+	return ret;
+}
+
+static int palmtx_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static int palmtx_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMTX_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMTX_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMTX_POWER_DETECT);
+}
+
+static char *palmtx_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmtx_is_ac_online,
+	.is_usb_online   = palmtx_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmtx_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmtx_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * WM97xx battery
+ ******************************************************************************/
+static struct wm97xx_batt_info wm97xx_batt_pdata = {
+	.batt_aux	= WM97XX_AUX_ID3,
+	.temp_aux	= WM97XX_AUX_ID2,
+	.charge_gpio	= -1,
+	.max_voltage	= PALMTX_BAT_MAX_VOLTAGE,
+	.min_voltage	= PALMTX_BAT_MIN_VOLTAGE,
+	.batt_mult	= 1000,
+	.batt_div	= 414,
+	.temp_mult	= 1,
+	.temp_div	= 1,
+	.batt_tech	= POWER_SUPPLY_TECHNOLOGY_LIPO,
+	.batt_name	= "main-batt",
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmtx_lcd_modes[] = {
+{
+	.pixclock	= 57692,
+	.xres		= 320,
+	.yres		= 480,
+	.bpp		= 16,
+
+	.left_margin	= 32,
+	.right_margin	= 1,
+	.upper_margin	= 7,
+	.lower_margin	= 1,
+
+	.hsync_len	= 4,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmtx_lcd_screen = {
+	.modes		= palmtx_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmtx_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+	&palmtx_pxa_keys,
+#endif
+	&palmtx_backlight,
+	&power_supply,
+};
+
+static struct map_desc palmtx_io_desc[] __initdata = {
+{
+	.virtual	= PALMTX_PCMCIA_VIRT,
+	.pfn		= __phys_to_pfn(PALMTX_PCMCIA_PHYS),
+	.length		= PALMTX_PCMCIA_SIZE,
+	.type		= MT_DEVICE
+},
+};
+
+static void __init palmtx_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(palmtx_io_desc, ARRAY_SIZE(palmtx_io_desc));
+}
+
+static void __init palmtx_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
+
+	set_pxa_fb_info(&palmtx_lcd_screen);
+	pxa_set_mci_info(&palmtx_mci_platform_data);
+	pxa_set_udc_info(&palmtx_udc_info);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmtx_ficp_platform_data);
+	pxa_set_keypad_info(&palmtx_keypad_platform_data);
+	wm97xx_bat_set_pdata(&wm97xx_batt_pdata);
+
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMTX, "Palm T|X")
+	.phys_io	= PALMTX_PHYS_IO_START,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= palmtx_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmtx_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
new file mode 100644
index 0000000..2f730da
--- /dev/null
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -0,0 +1,554 @@
+/*
+ * Hardware definitions for Palm Zire72
+ *
+ * Authors:
+ *	Vladimir "Farcaller" Pouzanov <farcaller@gmail.com>
+ *	Sergey Lapin <slapin@ossfans.org>
+ *	Alex Osborne <bobofdoom@gmail.com>
+ *	Jan Herman <2hp@seznam.cz>
+ *
+ * Rewrite for mainline:
+ *	Marek Vasut <marek.vasut@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (find more info at www.hackndev.com)
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <linux/sysdev.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/pda_power.h>
+#include <linux/pwm_backlight.h>
+#include <linux/gpio.h>
+#include <linux/power_supply.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/audio.h>
+#include <mach/palmz72.h>
+#include <mach/mmc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/irda.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/udc.h>
+#include <mach/pm.h>
+
+#include "generic.h"
+#include "devices.h"
+
+/******************************************************************************
+ * Pin configuration
+ ******************************************************************************/
+static unsigned long palmz72_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO14_GPIO,	/* SD detect */
+	GPIO115_GPIO,	/* SD RO */
+	GPIO98_GPIO,	/* SD power */
+
+	/* AC97 */
+	GPIO28_AC97_BITCLK,
+	GPIO29_AC97_SDATA_IN_0,
+	GPIO30_AC97_SDATA_OUT,
+	GPIO31_AC97_SYNC,
+
+	/* IrDA */
+	GPIO49_GPIO,	/* ir disable */
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+
+	/* PWM */
+	GPIO16_PWM0_OUT,
+
+	/* USB */
+	GPIO15_GPIO,	/* usb detect */
+	GPIO12_GPIO,	/* usb pullup */
+	GPIO95_GPIO,	/* usb power */
+
+	/* Matrix keypad */
+	GPIO100_KP_MKIN_0	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO101_KP_MKIN_1	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO102_KP_MKIN_2	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO97_KP_MKIN_3	| WAKEUP_ON_LEVEL_HIGH,
+	GPIO103_KP_MKOUT_0,
+	GPIO104_KP_MKOUT_1,
+	GPIO105_KP_MKOUT_2,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+	GPIO20_GPIO,	/* bl power */
+	GPIO21_GPIO,	/* LCD border switch */
+	GPIO22_GPIO,	/* LCD border color */
+	GPIO96_GPIO,	/* lcd power */
+
+	/* Misc. */
+	GPIO0_GPIO	| WAKEUP_ON_LEVEL_HIGH,	/* power detect */
+	GPIO88_GPIO,				/* green led */
+	GPIO27_GPIO,				/* WM9712 IRQ */
+};
+
+/******************************************************************************
+ * SD/MMC card controller
+ ******************************************************************************/
+static int palmz72_mci_init(struct device *dev,
+				irq_handler_t palmz72_detect_int, void *data)
+{
+	int err = 0;
+
+	/* Setup an interrupt for detecting card insert/remove events */
+	err = gpio_request(GPIO_NR_PALMZ72_SD_DETECT_N, "SD IRQ");
+	if (err)
+		goto err;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_DETECT_N);
+	if (err)
+		goto err2;
+	err = request_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N),
+			palmz72_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM |
+			IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING,
+			"SD/MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n",
+				__func__);
+		goto err2;
+	}
+
+	/* SD_POWER is not actually power, but it is more like chip
+	 * select, i.e. it is inverted */
+
+	err = gpio_request(GPIO_NR_PALMZ72_SD_POWER_N, "SD_POWER");
+	if (err)
+		goto err3;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	if (err)
+		goto err4;
+	err = gpio_request(GPIO_NR_PALMZ72_SD_RO, "SD_RO");
+	if (err)
+		goto err4;
+	err = gpio_direction_input(GPIO_NR_PALMZ72_SD_RO);
+	if (err)
+		goto err5;
+
+	printk(KERN_DEBUG "%s: irq registered\n", __func__);
+
+	return 0;
+
+err5:
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+err4:
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+err3:
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+err:
+	return err;
+}
+
+static void palmz72_mci_exit(struct device *dev, void *data)
+{
+	gpio_free(GPIO_NR_PALMZ72_SD_POWER_N);
+	free_irq(gpio_to_irq(GPIO_NR_PALMZ72_SD_DETECT_N), data);
+	gpio_free(GPIO_NR_PALMZ72_SD_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static void palmz72_mci_power(struct device *dev, unsigned int vdd)
+{
+	struct pxamci_platform_data *p_d = dev->platform_data;
+	if (p_d->ocr_mask & (1 << vdd))
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 0);
+	else
+		gpio_set_value(GPIO_NR_PALMZ72_SD_POWER_N, 1);
+}
+
+static int palmz72_mci_ro(struct device *dev)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_SD_RO);
+}
+
+static struct pxamci_platform_data palmz72_mci_platform_data = {
+	.ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.setpower	= palmz72_mci_power,
+	.get_ro		= palmz72_mci_ro,
+	.init 		= palmz72_mci_init,
+	.exit		= palmz72_mci_exit,
+};
+
+/******************************************************************************
+ * GPIO keyboard
+ ******************************************************************************/
+static unsigned int palmz72_matrix_keys[] = {
+	KEY(0, 0, KEY_POWER),
+	KEY(0, 1, KEY_F1),
+	KEY(0, 2, KEY_ENTER),
+
+	KEY(1, 0, KEY_F2),
+	KEY(1, 1, KEY_F3),
+	KEY(1, 2, KEY_F4),
+
+	KEY(2, 0, KEY_UP),
+	KEY(2, 2, KEY_DOWN),
+
+	KEY(3, 0, KEY_RIGHT),
+	KEY(3, 2, KEY_LEFT),
+};
+
+static struct pxa27x_keypad_platform_data palmz72_keypad_platform_data = {
+	.matrix_key_rows	= 4,
+	.matrix_key_cols	= 3,
+	.matrix_key_map		= palmz72_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(palmz72_matrix_keys),
+
+	.debounce_interval	= 30,
+};
+
+/******************************************************************************
+ * Backlight
+ ******************************************************************************/
+static int palmz72_backlight_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_BL_POWER, "BL POWER");
+	if (ret)
+		goto err;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_BL_POWER, 0);
+	if (ret)
+		goto err2;
+	ret = gpio_request(GPIO_NR_PALMZ72_LCD_POWER, "LCD POWER");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_output(GPIO_NR_PALMZ72_LCD_POWER, 0);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+err:
+	return ret;
+}
+
+static int palmz72_backlight_notify(int brightness)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
+	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
+	return brightness;
+}
+
+static void palmz72_backlight_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_BL_POWER);
+	gpio_free(GPIO_NR_PALMZ72_LCD_POWER);
+}
+
+static struct platform_pwm_backlight_data palmz72_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= PALMZ72_MAX_INTENSITY,
+	.dft_brightness	= PALMZ72_MAX_INTENSITY,
+	.pwm_period_ns	= PALMZ72_PERIOD_NS,
+	.init		= palmz72_backlight_init,
+	.notify		= palmz72_backlight_notify,
+	.exit		= palmz72_backlight_exit,
+};
+
+static struct platform_device palmz72_backlight = {
+	.name	= "pwm-backlight",
+	.dev	= {
+		.parent		= &pxa27x_device_pwm0.dev,
+		.platform_data	= &palmz72_backlight_data,
+	},
+};
+
+/******************************************************************************
+ * IrDA
+ ******************************************************************************/
+static int palmz72_irda_startup(struct device *dev)
+{
+	int err;
+	err = gpio_request(GPIO_NR_PALMZ72_IR_DISABLE, "IR DISABLE");
+	if (err)
+		goto err;
+	err = gpio_direction_output(GPIO_NR_PALMZ72_IR_DISABLE, 1);
+	if (err)
+		gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+err:
+	return err;
+}
+
+static void palmz72_irda_shutdown(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_IR_DISABLE);
+}
+
+static void palmz72_irda_transceiver_mode(struct device *dev, int mode)
+{
+	gpio_set_value(GPIO_NR_PALMZ72_IR_DISABLE, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static struct pxaficp_platform_data palmz72_ficp_platform_data = {
+	.startup		= palmz72_irda_startup,
+	.shutdown		= palmz72_irda_shutdown,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= palmz72_irda_transceiver_mode,
+};
+
+/******************************************************************************
+ * LEDs
+ ******************************************************************************/
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "palmz72:green:led",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_PALMZ72_LED_GREEN,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device palmz72_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	}
+};
+
+/******************************************************************************
+ * Power supply
+ ******************************************************************************/
+static int power_supply_init(struct device *dev)
+{
+	int ret;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_POWER_DETECT, "CABLE_STATE_AC");
+	if (ret)
+		goto err1;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_POWER_DETECT);
+	if (ret)
+		goto err2;
+
+	ret = gpio_request(GPIO_NR_PALMZ72_USB_DETECT_N, "CABLE_STATE_USB");
+	if (ret)
+		goto err2;
+	ret = gpio_direction_input(GPIO_NR_PALMZ72_USB_DETECT_N);
+	if (ret)
+		goto err3;
+
+	return 0;
+err3:
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+err2:
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+err1:
+	return ret;
+}
+
+static int palmz72_is_ac_online(void)
+{
+	return gpio_get_value(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static int palmz72_is_usb_online(void)
+{
+	return !gpio_get_value(GPIO_NR_PALMZ72_USB_DETECT_N);
+}
+
+static void power_supply_exit(struct device *dev)
+{
+	gpio_free(GPIO_NR_PALMZ72_USB_DETECT_N);
+	gpio_free(GPIO_NR_PALMZ72_POWER_DETECT);
+}
+
+static char *palmz72_supplicants[] = {
+	"main-battery",
+};
+
+static struct pda_power_pdata power_supply_info = {
+	.init            = power_supply_init,
+	.is_ac_online    = palmz72_is_ac_online,
+	.is_usb_online   = palmz72_is_usb_online,
+	.exit            = power_supply_exit,
+	.supplied_to     = palmz72_supplicants,
+	.num_supplicants = ARRAY_SIZE(palmz72_supplicants),
+};
+
+static struct platform_device power_supply = {
+	.name = "pda-power",
+	.id   = -1,
+	.dev  = {
+		.platform_data = &power_supply_info,
+	},
+};
+
+/******************************************************************************
+ * Framebuffer
+ ******************************************************************************/
+static struct pxafb_mode_info palmz72_lcd_modes[] = {
+{
+	.pixclock	= 115384,
+	.xres		= 320,
+	.yres		= 320,
+	.bpp		= 16,
+
+	.left_margin	= 27,
+	.right_margin	= 7,
+	.upper_margin	= 7,
+	.lower_margin	= 8,
+
+	.hsync_len	= 6,
+	.vsync_len	= 1,
+},
+};
+
+static struct pxafb_mach_info palmz72_lcd_screen = {
+	.modes		= palmz72_lcd_modes,
+	.num_modes	= ARRAY_SIZE(palmz72_lcd_modes),
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+#ifdef CONFIG_PM
+
+/* We have some black magic here
+ * PalmOS ROM on recover expects special struct physical address
+ * to be transferred via PSPR. Using this struct PalmOS restores
+ * its state after sleep. As for Linux, we need to setup it the
+ * same way. More than that, PalmOS ROM changes some values in memory.
+ * For now only one location is found, which needs special treatment.
+ * Thanks to Alex Osborne, Andrzej Zaborowski, and lots of other people
+ * for reading backtraces for me :)
+ */
+
+#define PALMZ72_SAVE_DWORD ((unsigned long *)0xc0000050)
+
+static struct palmz72_resume_info palmz72_resume_info = {
+	.magic0 = 0xb4e6,
+	.magic1 = 1,
+
+	/* reset state, MMU off etc */
+	.arm_control = 0,
+	.aux_control = 0,
+	.ttb = 0,
+	.domain_access = 0,
+	.process_id = 0,
+};
+
+static unsigned long store_ptr;
+
+/* sys_device for Palm Zire 72 PM */
+
+static int palmz72_pm_suspend(struct sys_device *dev, pm_message_t msg)
+{
+	/* setup the resume_info struct for the original bootloader */
+	palmz72_resume_info.resume_addr = (u32) pxa_cpu_resume;
+
+	/* Storing memory touched by ROM */
+	store_ptr = *PALMZ72_SAVE_DWORD;
+
+	/* Setting PSPR to a proper value */
+	PSPR = virt_to_phys(&palmz72_resume_info);
+
+	return 0;
+}
+
+static int palmz72_pm_resume(struct sys_device *dev)
+{
+	*PALMZ72_SAVE_DWORD = store_ptr;
+	return 0;
+}
+
+static struct sysdev_class palmz72_pm_sysclass = {
+	.name = "palmz72_pm",
+	.suspend = palmz72_pm_suspend,
+	.resume = palmz72_pm_resume,
+};
+
+static struct sys_device palmz72_pm_device = {
+	.cls = &palmz72_pm_sysclass,
+};
+
+static int __init palmz72_pm_init(void)
+{
+	int ret = -ENODEV;
+	if (machine_is_palmz72()) {
+		ret = sysdev_class_register(&palmz72_pm_sysclass);
+		if (ret == 0)
+			ret = sysdev_register(&palmz72_pm_device);
+	}
+	return ret;
+}
+
+device_initcall(palmz72_pm_init);
+#endif
+
+/******************************************************************************
+ * Machine init
+ ******************************************************************************/
+static struct platform_device *devices[] __initdata = {
+	&palmz72_backlight,
+	&palmz72_leds,
+	&power_supply,
+};
+
+static void __init palmz72_init(void)
+{
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
+	set_pxa_fb_info(&palmz72_lcd_screen);
+	pxa_set_mci_info(&palmz72_mci_platform_data);
+	pxa_set_ac97_info(NULL);
+	pxa_set_ficp_info(&palmz72_ficp_platform_data);
+	pxa_set_keypad_info(&palmz72_keypad_platform_data);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+MACHINE_START(PALMZ72, "Palm Zire72")
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= io_p2v(0x40000000),
+	.boot_params	= 0xa0000100,
+	.map_io		= pxa_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= palmz72_init
+MACHINE_END
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 3b945eb..36135a0 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -24,15 +24,17 @@
 #include <linux/platform_device.h>
 #include <linux/mtd/physmap.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/max7301.h>
 #include <linux/leds.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx_spi.h>
-#include <asm/arch/pcm027.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/pcm027.h>
 #include "generic.h"
 
 /*
@@ -84,6 +86,28 @@
  * *) CPU internal use only
  */
 
+static unsigned long pcm027_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO20_nSDCS_2,
+	GPIO21_nSDCS_3,
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,	/* Ethernet */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
+	/* GPIO */
+	GPIO52_GPIO,	/* IRQ from network controller */
+#ifdef CONFIG_LEDS_GPIO
+	GPIO90_GPIO,	/* PCM027_LED_CPU */
+	GPIO91_GPIO,	/* PCM027_LED_HEART_BEAT */
+#endif
+	GPIO114_GPIO,	/* IRQ from CAN controller */
+};
+
 /*
  * SMC91x network controller specific stuff
  */
@@ -108,6 +132,32 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+/*
+ * SPI host and devices
+ */
+static struct pxa2xx_spi_master pxa_ssp_master_info = {
+	.num_chipselect	= 1,
+};
+
+static struct max7301_platform_data max7301_info = {
+	.base = -1,
+};
+
+/* bus_num must match id in pxa2xx_set_spi_info() call */
+static struct spi_board_info spi_board_info[] __initdata = {
+	{
+		.modalias	= "max7301",
+		.platform_data	= &max7301_info,
+		.max_speed_hz	= 13000000,
+		.bus_num	= 1,
+		.chip_select	= 0,
+		.mode		= SPI_MODE_0,
+	},
+};
+
+/*
+ * NOR flash
+ */
 static struct physmap_flash_data pcm027_flash_data = {
 	.width  = 4,
 };
@@ -178,18 +228,17 @@ static void __init pcm027_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
 
-	/* LEDs (on demand only) */
-#ifdef CONFIG_LEDS_GPIO
-	pxa_gpio_mode(PCM027_LED_CPU | GPIO_OUT);
-	pxa_gpio_mode(PCM027_LED_HEARD_BEAT | GPIO_OUT);
-#endif /* CONFIG_LEDS_GPIO */
+	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* at last call the baseboard to initialize itself */
 #ifdef CONFIG_MACH_PCM990_BASEBOARD
 	pcm990_baseboard_init();
 #endif
+
+	pxa2xx_set_spi_info(1, &pxa_ssp_master_info);
+	spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info));
 }
 
 static void __init pcm027_map_io(void)
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index 49d951d..f601425 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -22,23 +22,130 @@
 
 #include <linux/irq.h>
 #include <linux/platform_device.h>
-#include <linux/ide.h>
 #include <linux/i2c.h>
+#include <linux/pwm_backlight.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/camera.h>
+#include <mach/i2c.h>
+#include <mach/camera.h>
 #include <asm/mach/map.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pcm990_baseboard.h>
+#include <mach/pxa-regs.h>
+#include <mach/audio.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pcm990_baseboard.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa27x.h>
+
+#include "devices.h"
+#include "generic.h"
+
+static unsigned long pcm990_pin_config[] __initdata = {
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	/* USB */
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	/* PWM0 */
+	GPIO16_PWM0_OUT,
+};
+
+/*
+ * pcm990_lcd_power - control power supply to the LCD
+ * @on: 0 = switch off, 1 = switch on
+ *
+ * Called by the pxafb driver
+ */
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+static void pcm990_lcd_power(int on, struct fb_var_screeninfo *var)
+{
+	if (on) {
+		/* enable LCD-Latches
+		 * power on LCD
+		 */
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) =
+			PCM990_CTRL_LCDPWR + PCM990_CTRL_LCDON;
+	} else {
+		/* disable LCD-Latches
+		 * power off LCD
+		 */
+		__PCM990_CTRL_REG(PCM990_CTRL_PHYS + PCM990_CTRL_REG3) = 0x00;
+	}
+}
+#endif
+
+#if defined(CONFIG_PCM990_DISPLAY_SHARP)
+static struct pxafb_mode_info fb_info_sharp_lq084v1dg21 = {
+	.pixclock		= 28000,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 20,
+	.left_margin		= 103,
+	.right_margin		= 47,
+	.vsync_len		= 6,
+	.upper_margin		= 28,
+	.lower_margin		= 5,
+	.sync			= 0,
+	.cmap_greyscale		= 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+	.modes			= &fb_info_sharp_lq084v1dg21,
+	.num_modes		= 1,
+	.lccr0			= LCCR0_PAS,
+	.lccr3			= LCCR3_PCP,
+	.pxafb_lcd_power	= pcm990_lcd_power,
+};
+#elif defined(CONFIG_PCM990_DISPLAY_NEC)
+struct pxafb_mode_info fb_info_nec_nl6448bc20_18d = {
+	.pixclock		= 39720,
+	.xres			= 640,
+	.yres			= 480,
+	.bpp			= 16,
+	.hsync_len		= 32,
+	.left_margin		= 16,
+	.right_margin		= 48,
+	.vsync_len		= 2,
+	.upper_margin		= 12,
+	.lower_margin		= 17,
+	.sync			= 0,
+	.cmap_greyscale		= 0,
+};
+
+static struct pxafb_mach_info pcm990_fbinfo __initdata = {
+	.modes			= &fb_info_nec_nl6448bc20_18d,
+	.num_modes		= 1,
+	.lccr0			= LCCR0_Act,
+	.lccr3			= LCCR3_PixFlEdg,
+	.pxafb_lcd_power	= pcm990_lcd_power,
+};
+#endif
+
+static struct platform_pwm_backlight_data pcm990_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 1023,
+	.dft_brightness	= 1023,
+	.pwm_period_ns	= 78770,
+};
+
+static struct platform_device pcm990_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data = &pcm990_backlight_data,
+	},
+};
 
 /*
- * The PCM-990 development baseboard uses PCM-027's hardeware in the
+ * The PCM-990 development baseboard uses PCM-027's hardware in the
  * following way:
  *
  * - LCD support is in use
@@ -155,8 +262,7 @@ static void pcm990_irq_handler(unsigned int irq, struct irq_desc *desc)
 					GPIO_bit(PCM990_CTRL_INT_IRQ_GPIO);
 		if (likely(pending)) {
 			irq = PCM027_IRQ(0) + __ffs(pending);
-			desc = irq_desc + irq;
-			desc_handle_irq(irq, desc);
+			generic_handle_irq(irq);
 		}
 		pending = (~PCM990_INTSETCLR) & pcm990_irq_enabled;
 	} while (pending);
@@ -185,16 +291,6 @@ static int pcm990_mci_init(struct device *dev, irq_handler_t mci_detect_int,
 {
 	int err;
 
-	/*
-	 * enable GPIO for PXA27x MMC controller
-	 */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
 	err = request_irq(PCM027_MMCDET_IRQ, mci_detect_int, IRQF_DISABLED,
 			     "MMC card detect", data);
 	if (err)
@@ -231,61 +327,37 @@ static struct pxamci_platform_data pcm990_mci_platform_data = {
 	.exit		= pcm990_mci_exit,
 };
 
-/*
- * init OHCI hardware to work with
- *
- * Note: Only USB port 1 (host only) is connected
- *
- * GPIO88 (USBHPWR#1): overcurrent in, overcurrent when low
- * GPIO89 (USBHPEN#1): power-on out, on when low
- */
-static int pcm990_ohci_init(struct device *dev)
-{
-	pxa_gpio_mode(PCM990_USB_OVERCURRENT);
-	pxa_gpio_mode(PCM990_USB_PWR_EN);
-	/*
-	 * disable USB port 2 and 3
-	 * power sense is active low
-	 */
-	UHCHR = ((UHCHR) | UHCHR_PCPL | UHCHR_PSPL | UHCHR_SSEP2 |
-				UHCHR_SSEP3) & ~(UHCHR_SSEP1 | UHCHR_SSE);
-	/*
-	 * wait 10ms after Power on
-	 * overcurrent per port
-	 * power switch per port
-	 */
-	UHCRHDA = (5<<24) | (1<<11) | (1<<8);	/* FIXME: Required? */
-
-	return 0;
-}
-
 static struct pxaohci_platform_data pcm990_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= pcm990_ohci_init,
-	.exit		= NULL,
+	.flags		= ENABLE_PORT1 | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.power_on_delay	= 10,
 };
 
 /*
  * PXA27x Camera specific stuff
  */
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+static unsigned long pcm990_camera_pin_config[] = {
+	/* CIF */
+	GPIO98_CIF_DD_0,
+	GPIO105_CIF_DD_1,
+	GPIO104_CIF_DD_2,
+	GPIO103_CIF_DD_3,
+	GPIO95_CIF_DD_4,
+	GPIO94_CIF_DD_5,
+	GPIO93_CIF_DD_6,
+	GPIO108_CIF_DD_7,
+	GPIO107_CIF_DD_8,
+	GPIO106_CIF_DD_9,
+	GPIO42_CIF_MCLK,
+	GPIO45_CIF_PCLK,
+	GPIO43_CIF_FV,
+	GPIO44_CIF_LV,
+};
+
 static int pcm990_pxacamera_init(struct device *dev)
 {
-	pxa_gpio_mode(GPIO98_CIF_DD_0_MD);
-	pxa_gpio_mode(GPIO105_CIF_DD_1_MD);
-	pxa_gpio_mode(GPIO104_CIF_DD_2_MD);
-	pxa_gpio_mode(GPIO103_CIF_DD_3_MD);
-	pxa_gpio_mode(GPIO95_CIF_DD_4_MD);
-	pxa_gpio_mode(GPIO94_CIF_DD_5_MD);
-	pxa_gpio_mode(GPIO93_CIF_DD_6_MD);
-	pxa_gpio_mode(GPIO108_CIF_DD_7_MD);
-	pxa_gpio_mode(GPIO107_CIF_DD_8_MD);
-	pxa_gpio_mode(GPIO106_CIF_DD_9_MD);
-	pxa_gpio_mode(GPIO42_CIF_MCLK_MD);
-	pxa_gpio_mode(GPIO45_CIF_PCLK_MD);
-	pxa_gpio_mode(GPIO43_CIF_FV_MD);
-	pxa_gpio_mode(GPIO44_CIF_LV_MD);
-
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	return 0;
 }
 
@@ -333,36 +405,6 @@ static struct i2c_board_info __initdata pcm990_i2c_devices[] = {
 #endif /* CONFIG_VIDEO_PXA27x ||CONFIG_VIDEO_PXA27x_MODULE */
 
 /*
- * AC97 support
- * Note: The connected AC97 mixer also reports interrupts at PCM990_AC97_IRQ
- */
-static struct resource pxa27x_ac97_resources[] = {
-	[0] = {
-		.start  = 0x40500000,
-		.end	= 0x40500000 + 0xfff,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = IRQ_AC97,
-		.end    = IRQ_AC97,
-		.flags  = IORESOURCE_IRQ,
-	},
-};
-
-static u64 pxa_ac97_dmamask = 0xffffffffUL;
-
-static struct platform_device pxa27x_device_ac97 = {
-	.name           = "pxa2xx-ac97",
-	.id             = -1,
-	.dev            = {
-		.dma_mask = &pxa_ac97_dmamask,
-		.coherent_dma_mask = 0xffffffff,
-	},
-	.num_resources  = ARRAY_SIZE(pxa27x_ac97_resources),
-	.resource       = pxa27x_ac97_resources,
-};
-
-/*
  * enable generic access to the base board control CPLDs U6 and U7
  */
 static struct map_desc pcm990_io_desc[] __initdata = {
@@ -387,13 +429,18 @@ static struct map_desc pcm990_io_desc[] __initdata = {
  */
 void __init pcm990_baseboard_init(void)
 {
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_pin_config));
+
 	/* register CPLD access */
-	iotable_init(pcm990_io_desc, ARRAY_SIZE(pcm990_io_desc));
+	iotable_init(ARRAY_AND_SIZE(pcm990_io_desc));
 
 	/* register CPLD's IRQ controller */
 	pcm990_init_irq();
 
-	platform_device_register(&pxa27x_device_ac97);
+#ifndef CONFIG_PCM990_DISPLAY_NONE
+	set_pxa_fb_info(&pcm990_fbinfo);
+#endif
+	platform_device_register(&pcm990_backlight_device);
 
 	/* MMC */
 	pxa_set_mci_info(&pcm990_mci_platform_data);
@@ -402,13 +449,13 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_ohci_info(&pcm990_ohci_platform_data);
 
 	pxa_set_i2c_info(NULL);
+	pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
-	i2c_register_board_info(0, pcm990_i2c_devices,
-		ARRAY_SIZE(pcm990_i2c_devices));
+	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
 #endif
 
-	printk(KERN_INFO"PCM-990 Evaluation baseboard initialized\n");
+	printk(KERN_INFO "PCM-990 Evaluation baseboard initialized\n");
 }
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 7d4debb..164eb0b 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -16,12 +16,12 @@
 #include <linux/errno.h>
 #include <linux/time.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/memory.h>
 #include <asm/system.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/lubbock.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/lubbock.h>
 #include <asm/mach/time.h>
 
 struct pxa_cpu_pm_fns *pxa_cpu_pm_fns;
@@ -86,9 +86,27 @@ static int pxa_pm_valid(suspend_state_t state)
 	return -EINVAL;
 }
 
+static int pxa_pm_prepare(void)
+{
+	int ret = 0;
+
+	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->prepare)
+		ret = pxa_cpu_pm_fns->prepare();
+
+	return ret;
+}
+
+static void pxa_pm_finish(void)
+{
+	if (pxa_cpu_pm_fns && pxa_cpu_pm_fns->finish)
+		pxa_cpu_pm_fns->finish();
+}
+
 static struct platform_suspend_ops pxa_pm_ops = {
 	.valid		= pxa_pm_valid,
 	.enter		= pxa_pm_enter,
+	.prepare	= pxa_pm_prepare,
+	.finish		= pxa_pm_finish,
 };
 
 static int __init pxa_pm_init(void)
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index 0b30f25..2e3bd8b 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -20,8 +20,11 @@
 #include <linux/fb.h>
 #include <linux/pm.h>
 #include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/irq.h>
 #include <asm/setup.h>
@@ -31,15 +34,18 @@
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/poodle.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/poodle.h>
+#include <mach/pxafb.h>
+#include <mach/sharpsl.h>
+#include <mach/ssp.h>
+#include <mach/pxa2xx_spi.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/hardware/locomo.h>
@@ -49,6 +55,88 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long poodle_pin_config[] __initdata = {
+	/* I/O */
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO18_RDY,
+
+	/* Clock */
+	GPIO12_32KHz,
+
+	/* SSP1 */
+	GPIO23_SSP1_SCLK,
+	GPIO25_SSP1_TXD,
+	GPIO26_SSP1_RXD,
+	GPIO24_GPIO,	/* POODLE_GPIO_TP_CS - SFRM as chip select */
+
+	/* I2S */
+	GPIO28_I2S_BITCLK_OUT,
+	GPIO29_I2S_SDATA_IN,
+	GPIO30_I2S_SDATA_OUT,
+	GPIO31_I2S_SYNC,
+	GPIO32_I2S_SYSCLK,
+
+	/* Infra-Red */
+	GPIO47_FICP_TXD,
+	GPIO46_FICP_RXD,
+
+	/* FFUART */
+	GPIO40_FFUART_DTR,
+	GPIO41_FFUART_RTS,
+	GPIO39_FFUART_TXD,
+	GPIO37_FFUART_DSR,
+	GPIO34_FFUART_RXD,
+	GPIO35_FFUART_CTS,
+
+	/* LCD */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO6_MMC_CLK,
+	GPIO8_MMC_CS0,
+
+	/* GPIO */
+	GPIO9_GPIO,	/* POODLE_GPIO_nSD_DETECT */
+	GPIO7_GPIO,	/* POODLE_GPIO_nSD_WP */
+	GPIO3_GPIO,	/* POODLE_GPIO_SD_PWR */
+	GPIO33_GPIO,	/* POODLE_GPIO_SD_PWR1 */
+
+	GPIO20_GPIO,	/* POODLE_GPIO_USB_PULLUP */
+	GPIO22_GPIO,	/* POODLE_GPIO_IR_ON */
+};
+
 static struct resource poodle_scoop_resources[] = {
 	[0] = {
 		.start		= 0x10800000,
@@ -60,6 +148,7 @@ static struct resource poodle_scoop_resources[] = {
 static struct scoop_config poodle_scoop_setup = {
 	.io_dir		= POODLE_SCOOP_IO_DIR,
 	.io_out		= POODLE_SCOOP_IO_OUT,
+	.gpio_base	= POODLE_SCOOP_GPIO_BASE,
 };
 
 struct platform_device poodle_scoop_device = {
@@ -72,27 +161,6 @@ struct platform_device poodle_scoop_device = {
 	.resource	= poodle_scoop_resources,
 };
 
-static void poodle_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
-		GPIO_bit(GPIO53_nPCE_2);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO52_nPCE_1_MD);
-	pxa_gpio_mode(GPIO53_nPCE_2_MD);
-	pxa_gpio_mode(GPIO54_pSKTSEL_MD);
-}
-
 static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 {
 	.dev        = &poodle_scoop_device.dev,
@@ -105,7 +173,6 @@ static struct scoop_pcmcia_dev poodle_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config poodle_pcmcia_config = {
 	.devs         = &poodle_pcmcia_scoop[0],
 	.num_devs     = 1,
-	.pcmcia_init  = poodle_pcmcia_init,
 };
 
 EXPORT_SYMBOL(poodle_scoop_device);
@@ -134,62 +201,55 @@ struct platform_device poodle_locomo_device = {
 
 EXPORT_SYMBOL(poodle_locomo_device);
 
-/*
- * Poodle SSP Device
- */
-
-struct platform_device poodle_ssp_device = {
-	.name		= "corgi-ssp",
-	.id		= -1,
-};
-
-struct corgissp_machinfo poodle_ssp_machinfo = {
-	.port		= 1,
-	.cs_lcdcon	= -1,
-	.cs_ads7846	= -1,
-	.cs_max1111	= -1,
-	.clk_lcdcon	= 2,
-	.clk_ads7846	= 36,
-	.clk_max1111	= 2,
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master poodle_spi_info = {
+	.num_chipselect	= 1,
 };
 
-
-/*
- * Poodle Touch Screen Device
- */
-static struct resource poodlets_resources[] = {
-	[0] = {
-		.start		= POODLE_IRQ_GPIO_TP_INT,
-		.end		= POODLE_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
+static struct ads7846_platform_data poodle_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= POODLE_GPIO_TP_INT,
 };
 
-static unsigned long poodle_get_hsync_invperiod(void)
+static void ads7846_cs(u32 command)
 {
-	return 0;
+	gpio_set_value(POODLE_GPIO_TP_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static void poodle_null_hsync(void)
-{
-}
-
-static struct corgits_machinfo  poodle_ts_machinfo = {
-	.get_hsync_invperiod	= poodle_get_hsync_invperiod,
-	.put_hsync       	= poodle_null_hsync,
-	.wait_hsync      	= poodle_null_hsync,
+static struct pxa2xx_spi_chip poodle_ads7846_chip = {
+	.cs_control		= ads7846_cs,
 };
 
-static struct platform_device poodle_ts_device = {
-	.name		= "corgi-ts",
-	.dev		= {
-		.platform_data	= &poodle_ts_machinfo,
+static struct spi_board_info poodle_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 10000,
+		.bus_num	= 1,
+		.platform_data	= &poodle_ads7846_info,
+		.controller_data= &poodle_ads7846_chip,
+		.irq		= gpio_to_irq(POODLE_GPIO_TP_INT),
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(poodlets_resources),
-	.resource	= poodlets_resources,
 };
 
+static void __init poodle_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(POODLE_GPIO_TP_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	gpio_direction_output(POODLE_GPIO_TP_CS, 1);
+
+	pxa2xx_set_spi_info(1, &poodle_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(poodle_spi_devices));
+}
+#else
+static inline void poodle_init_spi(void) {}
+#endif
 
 /*
  * MMC/SD Device
@@ -203,22 +263,50 @@ static int poodle_mci_init(struct device *dev, irq_handler_t poodle_detect_int,
 {
 	int err;
 
-	/* setup GPIO for PXA25x MMC controller	*/
-	pxa_gpio_mode(GPIO6_MMCCLK_MD);
-	pxa_gpio_mode(GPIO8_MMCCS0_MD);
-	pxa_gpio_mode(POODLE_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(POODLE_GPIO_nSD_WP | GPIO_IN);
-	pxa_gpio_mode(POODLE_GPIO_SD_PWR | GPIO_OUT);
-	pxa_gpio_mode(POODLE_GPIO_SD_PWR1 | GPIO_OUT);
+	err = gpio_request(POODLE_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
+
+	err = gpio_request(POODLE_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR, "SD_PWR");
+	if (err)
+		goto err_free_2;
+
+	err = gpio_request(POODLE_GPIO_SD_PWR1, "SD_PWR1");
+	if (err)
+		goto err_free_3;
+
+	gpio_direction_input(POODLE_GPIO_nSD_DETECT);
+	gpio_direction_input(POODLE_GPIO_nSD_WP);
+
+	gpio_direction_output(POODLE_GPIO_SD_PWR, 0);
+	gpio_direction_output(POODLE_GPIO_SD_PWR1, 0);
 
 	poodle_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(POODLE_IRQ_GPIO_nSD_DETECT, poodle_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "poodle_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_4;
+	}
+
+	return 0;
 
+err_free_4:
+	gpio_free(POODLE_GPIO_SD_PWR1);
+err_free_3:
+	gpio_free(POODLE_GPIO_SD_PWR);
+err_free_2:
+	gpio_free(POODLE_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(POODLE_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -226,18 +314,19 @@ static void poodle_mci_setpower(struct device *dev, unsigned int vdd)
 {
 	struct pxamci_platform_data* p_d = dev->platform_data;
 
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		GPSR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+	if ((1 << vdd) & p_d->ocr_mask) {
+		gpio_set_value(POODLE_GPIO_SD_PWR, 1);
 		mdelay(2);
-		GPSR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 1);
 	} else {
-		GPCR(POODLE_GPIO_SD_PWR1) = GPIO_bit(POODLE_GPIO_SD_PWR1);
-		GPCR(POODLE_GPIO_SD_PWR) = GPIO_bit(POODLE_GPIO_SD_PWR);
+		gpio_set_value(POODLE_GPIO_SD_PWR1, 0);
+		gpio_set_value(POODLE_GPIO_SD_PWR, 0);
 	}
 }
 
 static int poodle_mci_get_ro(struct device *dev)
 {
+	return !!gpio_get_value(POODLE_GPIO_nSD_WP);
 	return GPLR(POODLE_GPIO_nSD_WP) & GPIO_bit(POODLE_GPIO_nSD_WP);
 }
 
@@ -245,6 +334,10 @@ static int poodle_mci_get_ro(struct device *dev)
 static void poodle_mci_exit(struct device *dev, void *data)
 {
 	free_irq(POODLE_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(POODLE_GPIO_SD_PWR1);
+	gpio_free(POODLE_GPIO_SD_PWR);
+	gpio_free(POODLE_GPIO_nSD_WP);
+	gpio_free(POODLE_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data poodle_mci_platform_data = {
@@ -261,37 +354,41 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
  */
 static void poodle_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF) {
-		GPSR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
-	} else {
-		GPCR(POODLE_GPIO_IR_ON) = GPIO_bit(POODLE_GPIO_IR_ON);
-	}
+	gpio_set_value(POODLE_GPIO_IR_ON, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
+}
+
+static int poodle_irda_startup(struct device *dev)
+{
+	int err;
+
+	err = gpio_request(POODLE_GPIO_IR_ON, "IR_ON");
+	if (err)
+		return err;
+
+	gpio_direction_output(POODLE_GPIO_IR_ON, 1);
+	return 0;
+}
+
+static void poodle_irda_shutdown(struct device *dev)
+{
+	gpio_free(POODLE_GPIO_IR_ON);
 }
 
 static struct pxaficp_platform_data poodle_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = poodle_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= poodle_irda_transceiver_mode,
+	.startup		= poodle_irda_startup,
+	.shutdown		= poodle_irda_shutdown,
 };
 
 
 /*
  * USB Device Controller
  */
-static void poodle_udc_command(int cmd)
-{
-	switch(cmd)	{
-	case PXA2XX_UDC_CMD_CONNECT:
-		GPSR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
-		break;
-	case PXA2XX_UDC_CMD_DISCONNECT:
-		GPCR(POODLE_GPIO_USB_PULLUP) = GPIO_bit(POODLE_GPIO_USB_PULLUP);
-		break;
-	}
-}
-
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
 	/* no connect GPIO; poodle can't tell connection status */
-	.udc_command		= poodle_udc_command,
+	.gpio_pullup	= POODLE_GPIO_USB_PULLUP,
 };
 
 
@@ -313,15 +410,12 @@ static struct pxafb_mode_info poodle_fb_mode = {
 static struct pxafb_mach_info poodle_fb_info = {
 	.modes		= &poodle_fb_mode,
 	.num_modes	= 1,
-	.lccr0		= LCCR0_Act | LCCR0_Sngl | LCCR0_Color,
-	.lccr3		= 0,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP,
 };
 
 static struct platform_device *devices[] __initdata = {
 	&poodle_locomo_device,
 	&poodle_scoop_device,
-	&poodle_ssp_device,
-	&poodle_ts_device,
 };
 
 static void poodle_poweroff(void)
@@ -341,58 +435,23 @@ static void __init poodle_init(void)
 	pm_power_off = poodle_poweroff;
 	arm_pm_restart = poodle_restart;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x00008000;
-	PGSR1 = 0x003F0202;
-	PGSR2 = 0x0001C000;
 	PCFR |= PCFR_OPDE;
 
-	/* cpu initialize */
-	/* Pgsr Register */
-  	PGSR0 = 0x0146dd80;
-  	PGSR1 = 0x03bf0890;
-  	PGSR2 = 0x0001c000;
-
-	/* Alternate Register */
-  	GAFR0_L = 0x01001000;
-  	GAFR0_U = 0x591a8010;
-  	GAFR1_L = 0x900a8451;
-  	GAFR1_U = 0xaaa5aaaa;
-  	GAFR2_L = 0x8aaaaaaa;
-  	GAFR2_U = 0x00000002;
-
-	/* Direction Register */
-  	GPDR0 = 0xd3f0904c;
-  	GPDR1 = 0xfcffb7d3;
-  	GPDR2 = 0x0001ffff;
-
-	/* Output Register */
-  	GPCR0 = 0x00000000;
-  	GPCR1 = 0x00000000;
-  	GPCR2 = 0x00000000;
-
-  	GPSR0 = 0x00400000;
-  	GPSR1 = 0x00000000;
-        GPSR2 = 0x00000000;
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
+
+	platform_scoop_config = &poodle_pcmcia_config;
+
+	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
+	if (ret)
+		pr_warning("poodle: Unable to register LoCoMo device\n");
 
 	set_pxa_fb_parent(&poodle_locomo_device.dev);
 	set_pxa_fb_info(&poodle_fb_info);
-	pxa_gpio_mode(POODLE_GPIO_USB_PULLUP | GPIO_OUT);
-	pxa_gpio_mode(POODLE_GPIO_IR_ON | GPIO_OUT);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_mci_info(&poodle_mci_platform_data);
 	pxa_set_ficp_info(&poodle_ficp_platform_data);
-
-	platform_scoop_config = &poodle_pcmcia_config;
-
-	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
-	if (ret) {
-		printk(KERN_WARNING "poodle: Unable to register LoCoMo device\n");
-	}
-	corgi_ssp_set_machinfo(&poodle_ssp_machinfo);
+	pxa_set_i2c_info(NULL);
+	poodle_init_spi();
 }
 
 static void __init fixup_poodle(struct machine_desc *desc,
diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c
new file mode 100644
index 0000000..316cd98
--- /dev/null
+++ b/arch/arm/mach-pxa/pwm.c
@@ -0,0 +1,319 @@
+/*
+ * linux/arch/arm/mach-pxa/pwm.c
+ *
+ * simple driver for PWM (Pulse Width Modulator) controller
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * 2008-02-13	initial version
+ * 		eric miao <eric.miao@marvell.com>
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+
+#include <asm/div64.h>
+#include <mach/pxa-regs.h>
+
+/* PWM registers and bits definitions */
+#define PWMCR		(0x00)
+#define PWMDCR		(0x04)
+#define PWMPCR		(0x08)
+
+#define PWMCR_SD	(1 << 6)
+#define PWMDCR_FD	(1 << 10)
+
+struct pwm_device {
+	struct list_head	node;
+	struct platform_device *pdev;
+
+	const char	*label;
+	struct clk	*clk;
+	int		clk_enabled;
+	void __iomem	*mmio_base;
+
+	unsigned int	use_count;
+	unsigned int	pwm_id;
+};
+
+/*
+ * period_ns = 10^9 * (PRESCALE + 1) * (PV + 1) / PWM_CLK_RATE
+ * duty_ns   = 10^9 * (PRESCALE + 1) * DC / PWM_CLK_RATE
+ */
+int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
+{
+	unsigned long long c;
+	unsigned long period_cycles, prescale, pv, dc;
+
+	if (pwm == NULL || period_ns == 0 || duty_ns > period_ns)
+		return -EINVAL;
+
+	c = clk_get_rate(pwm->clk);
+	c = c * period_ns;
+	do_div(c, 1000000000);
+	period_cycles = c;
+
+	if (period_cycles < 0)
+		period_cycles = 1;
+	prescale = (period_cycles - 1) / 1024;
+	pv = period_cycles / (prescale + 1) - 1;
+
+	if (prescale > 63)
+		return -EINVAL;
+
+	if (duty_ns == period_ns)
+		dc = PWMDCR_FD;
+	else
+		dc = (pv + 1) * duty_ns / period_ns;
+
+	/* NOTE: the clock to PWM has to be enabled first
+	 * before writing to the registers
+	 */
+	clk_enable(pwm->clk);
+	__raw_writel(prescale, pwm->mmio_base + PWMCR);
+	__raw_writel(dc, pwm->mmio_base + PWMDCR);
+	__raw_writel(pv, pwm->mmio_base + PWMPCR);
+	clk_disable(pwm->clk);
+
+	return 0;
+}
+EXPORT_SYMBOL(pwm_config);
+
+int pwm_enable(struct pwm_device *pwm)
+{
+	int rc = 0;
+
+	if (!pwm->clk_enabled) {
+		rc = clk_enable(pwm->clk);
+		if (!rc)
+			pwm->clk_enabled = 1;
+	}
+	return rc;
+}
+EXPORT_SYMBOL(pwm_enable);
+
+void pwm_disable(struct pwm_device *pwm)
+{
+	if (pwm->clk_enabled) {
+		clk_disable(pwm->clk);
+		pwm->clk_enabled = 0;
+	}
+}
+EXPORT_SYMBOL(pwm_disable);
+
+static DEFINE_MUTEX(pwm_lock);
+static LIST_HEAD(pwm_list);
+
+struct pwm_device *pwm_request(int pwm_id, const char *label)
+{
+	struct pwm_device *pwm;
+	int found = 0;
+
+	mutex_lock(&pwm_lock);
+
+	list_for_each_entry(pwm, &pwm_list, node) {
+		if (pwm->pwm_id == pwm_id) {
+			found = 1;
+			break;
+		}
+	}
+
+	if (found) {
+		if (pwm->use_count == 0) {
+			pwm->use_count++;
+			pwm->label = label;
+		} else
+			pwm = ERR_PTR(-EBUSY);
+	} else
+		pwm = ERR_PTR(-ENOENT);
+
+	mutex_unlock(&pwm_lock);
+	return pwm;
+}
+EXPORT_SYMBOL(pwm_request);
+
+void pwm_free(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+
+	if (pwm->use_count) {
+		pwm->use_count--;
+		pwm->label = NULL;
+	} else
+		pr_warning("PWM device already freed\n");
+
+	mutex_unlock(&pwm_lock);
+}
+EXPORT_SYMBOL(pwm_free);
+
+static inline void __add_pwm(struct pwm_device *pwm)
+{
+	mutex_lock(&pwm_lock);
+	list_add_tail(&pwm->node, &pwm_list);
+	mutex_unlock(&pwm_lock);
+}
+
+static struct pwm_device *pwm_probe(struct platform_device *pdev,
+		unsigned int pwm_id, struct pwm_device *parent_pwm)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+	int ret = 0;
+
+	pwm = kzalloc(sizeof(struct pwm_device), GFP_KERNEL);
+	if (pwm == NULL) {
+		dev_err(&pdev->dev, "failed to allocate memory\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pwm->clk = clk_get(&pdev->dev, "PWMCLK");
+	if (IS_ERR(pwm->clk)) {
+		ret = PTR_ERR(pwm->clk);
+		goto err_free;
+	}
+	pwm->clk_enabled = 0;
+
+	pwm->use_count = 0;
+	pwm->pwm_id = pwm_id;
+	pwm->pdev = pdev;
+
+	if (parent_pwm != NULL) {
+		/* registers for the second PWM has offset of 0x10 */
+		pwm->mmio_base = parent_pwm->mmio_base + 0x10;
+		__add_pwm(pwm);
+		return pwm;
+	}
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "no memory resource defined\n");
+		ret = -ENODEV;
+		goto err_free_clk;
+	}
+
+	r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+	if (r == NULL) {
+		dev_err(&pdev->dev, "failed to request memory resource\n");
+		ret = -EBUSY;
+		goto err_free_clk;
+	}
+
+	pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	if (pwm->mmio_base == NULL) {
+		dev_err(&pdev->dev, "failed to ioremap() registers\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	__add_pwm(pwm);
+	platform_set_drvdata(pdev, pwm);
+	return pwm;
+
+err_free_mem:
+	release_mem_region(r->start, r->end - r->start + 1);
+err_free_clk:
+	clk_put(pwm->clk);
+err_free:
+	kfree(pwm);
+	return ERR_PTR(ret);
+}
+
+static int __devinit pxa25x_pwm_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm = pwm_probe(pdev, pdev->id, NULL);
+
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	return 0;
+}
+
+static int __devinit pxa27x_pwm_probe(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+
+	pwm = pwm_probe(pdev, pdev->id, NULL);
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	pwm = pwm_probe(pdev, pdev->id + 2, pwm);
+	if (IS_ERR(pwm))
+		return PTR_ERR(pwm);
+
+	return 0;
+}
+
+static int __devexit pwm_remove(struct platform_device *pdev)
+{
+	struct pwm_device *pwm;
+	struct resource *r;
+
+	pwm = platform_get_drvdata(pdev);
+	if (pwm == NULL)
+		return -ENODEV;
+
+	mutex_lock(&pwm_lock);
+	list_del(&pwm->node);
+	mutex_unlock(&pwm_lock);
+
+	iounmap(pwm->mmio_base);
+
+	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(r->start, r->end - r->start + 1);
+
+	clk_put(pwm->clk);
+	kfree(pwm);
+	return 0;
+}
+
+static struct platform_driver pxa25x_pwm_driver = {
+	.driver		= {
+		.name	= "pxa25x-pwm",
+	},
+	.probe		= pxa25x_pwm_probe,
+	.remove		= __devexit_p(pwm_remove),
+};
+
+static struct platform_driver pxa27x_pwm_driver = {
+	.driver		= {
+		.name	= "pxa27x-pwm",
+	},
+	.probe		= pxa27x_pwm_probe,
+	.remove		= __devexit_p(pwm_remove),
+};
+
+static int __init pwm_init(void)
+{
+	int ret = 0;
+
+	ret = platform_driver_register(&pxa25x_pwm_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register pxa25x_pwm_driver\n");
+		return ret;
+	}
+
+	ret = platform_driver_register(&pxa27x_pwm_driver);
+	if (ret) {
+		printk(KERN_ERR "failed to register pxa27x_pwm_driver\n");
+		return ret;
+	}
+
+	return ret;
+}
+arch_initcall(pwm_init);
+
+static void __exit pwm_exit(void)
+{
+	platform_driver_unregister(&pxa25x_pwm_driver);
+	platform_driver_unregister(&pxa27x_pwm_driver);
+}
+module_exit(pwm_exit);
+
+MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index e5b417d..25d17a1 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -23,17 +23,25 @@
 #include <linux/suspend.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
 
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"
 
+int cpu_is_pxa26x(void)
+{
+	return cpu_is_pxa250() && ((BOOT_DEF & 0x8) == 0);
+}
+EXPORT_SYMBOL_GPL(cpu_is_pxa26x);
+
 /*
  * Various clock factors driven by the CCCR register.
  */
@@ -108,6 +116,52 @@ static const struct clkops clk_pxa25x_lcd_ops = {
 	.getrate	= clk_pxa25x_lcd_getrate,
 };
 
+static unsigned long gpio12_config_32k[] = {
+	GPIO12_32KHz,
+};
+
+static unsigned long gpio12_config_gpio[] = {
+	GPIO12_GPIO,
+};
+
+static void clk_gpio12_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_32k, 1);
+}
+
+static void clk_gpio12_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio12_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio12_ops = {
+	.enable         = clk_gpio12_enable,
+	.disable        = clk_gpio12_disable,
+};
+
+static unsigned long gpio11_config_3m6[] = {
+	GPIO11_3_6MHz,
+};
+
+static unsigned long gpio11_config_gpio[] = {
+	GPIO11_GPIO,
+};
+
+static void clk_gpio11_enable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_3m6, 1);
+}
+
+static void clk_gpio11_disable(struct clk *clk)
+{
+	pxa2xx_mfp_config(gpio11_config_gpio, 1);
+}
+
+static const struct clkops clk_pxa25x_gpio11_ops = {
+	.enable         = clk_gpio11_enable,
+	.disable        = clk_gpio11_disable,
+};
+
 /*
  * 3.6864MHz -> OST, GPIO, SSP, PWM, PLLs (95.842MHz, 147.456MHz)
  * 95.842MHz -> MMC 19.169MHz, I2C 31.949MHz, FICP 47.923MHz, USB 47.923MHz
@@ -117,24 +171,29 @@ static struct clk pxa25x_hwuart_clk =
 	INIT_CKEN("UARTCLK", HWUART, 14745600, 1, &pxa_device_hwuart.dev)
 ;
 
+/*
+ * PXA 2xx clock declarations.
+ */
 static struct clk pxa25x_clks[] = {
 	INIT_CK("LCDCLK", LCD, &clk_pxa25x_lcd_ops, &pxa_device_fb.dev),
 	INIT_CKEN("UARTCLK", FFUART, 14745600, 1, &pxa_device_ffuart.dev),
 	INIT_CKEN("UARTCLK", BTUART, 14745600, 1, &pxa_device_btuart.dev),
 	INIT_CKEN("UARTCLK", STUART, 14745600, 1, NULL),
-	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa_device_udc.dev),
+	INIT_CKEN("UDCCLK", USB, 47923000, 5, &pxa25x_device_udc.dev),
+	INIT_CLK("GPIO11_CLK", &clk_pxa25x_gpio11_ops, 3686400, 0, NULL),
+	INIT_CLK("GPIO12_CLK", &clk_pxa25x_gpio12_ops, 32768, 0, NULL),
 	INIT_CKEN("MMCCLK", MMC, 19169000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("I2CCLK", I2C, 31949000, 0, &pxa_device_i2c.dev),
 
 	INIT_CKEN("SSPCLK",  SSP, 3686400, 0, &pxa25x_device_ssp.dev),
 	INIT_CKEN("SSPCLK", NSSP, 3686400, 0, &pxa25x_device_nssp.dev),
 	INIT_CKEN("SSPCLK", ASSP, 3686400, 0, &pxa25x_device_assp.dev),
+	INIT_CKEN("PWMCLK", PWM0, 3686400, 0, &pxa25x_device_pwm0.dev),
+	INIT_CKEN("PWMCLK", PWM1, 3686400, 0, &pxa25x_device_pwm1.dev),
 
 	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
 
 	/*
-	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
-	INIT_CKEN("PWMCLK",  PWM0, 3686400,  0, NULL),
 	INIT_CKEN("I2SCLK",  I2S,  14745600, 0, NULL),
 	*/
 	INIT_CKEN("FICPCLK", FICP, 47923000, 0, NULL),
@@ -150,48 +209,21 @@ static struct clk pxa25x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2,
-
-	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-
+enum {
 	SLEEP_SAVE_PSTR,
-
 	SLEEP_SAVE_CKEN,
-
 	SLEEP_SAVE_COUNT
 };
 
 
 static void pxa25x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2);
-
-	SAVE(GAFR0_L); SAVE(GAFR0_U);
-	SAVE(GAFR1_L); SAVE(GAFR1_U);
-	SAVE(GAFR2_L); SAVE(GAFR2_U);
-
 	SAVE(CKEN);
 	SAVE(PSTR);
-
-	/* Clear GPIO transition detect bits */
-	GEDR0 = GEDR0; GEDR1 = GEDR1; GEDR2 = GEDR2;
 }
 
 static void pxa25x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-
-	/* restore registers */
-	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
-	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
-	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
-
-	PSSR = PSSR_RDH | PSSR_PH;
-
 	RESTORE(CKEN);
 	RESTORE(PSTR);
 }
@@ -203,19 +235,32 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state)
 
 	switch (state) {
 	case PM_SUSPEND_MEM:
-		/* set resume return address */
-		PSPR = virt_to_phys(pxa_cpu_resume);
 		pxa25x_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
 }
 
+static int pxa25x_cpu_pm_prepare(void)
+{
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+	return 0;
+}
+
+static void pxa25x_cpu_pm_finish(void)
+{
+	/* ensure not to come back here if it wasn't intended */
+	PSPR = 0;
+}
+
 static struct pxa_cpu_pm_fns pxa25x_cpu_pm_fns = {
 	.save_count	= SLEEP_SAVE_COUNT,
 	.valid		= suspend_valid_only_mem,
 	.save		= pxa25x_cpu_pm_save,
 	.restore	= pxa25x_cpu_pm_restore,
 	.enter		= pxa25x_cpu_pm_enter,
+	.prepare	= pxa25x_cpu_pm_prepare,
+	.finish		= pxa25x_cpu_pm_finish,
 };
 
 static void __init pxa25x_init_pm(void)
@@ -260,7 +305,7 @@ void __init pxa25x_init_irq(void)
 }
 
 static struct platform_device *pxa25x_devices[] __initdata = {
-	&pxa_device_udc,
+	&pxa25x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
@@ -269,12 +314,16 @@ static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_ssp,
 	&pxa25x_device_nssp,
 	&pxa25x_device_assp,
+	&pxa25x_device_pwm0,
+	&pxa25x_device_pwm1,
 };
 
 static struct sys_device pxa25x_sysdev[] = {
 	{
 		.cls	= &pxa_irq_sysclass,
 	}, {
+		.cls	= &pxa2xx_mfp_sysclass,
+	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
 };
@@ -283,11 +332,10 @@ static int __init pxa25x_init(void)
 {
 	int i, ret = 0;
 
-	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
-		clks_register(&pxa25x_hwuart_clk, 1);
+	if (cpu_is_pxa25x()) {
+
+		reset_status = RCSR;
 
-	if (cpu_is_pxa21x() || cpu_is_pxa25x()) {
 		clks_register(pxa25x_clks, ARRAY_SIZE(pxa25x_clks));
 
 		if ((ret = pxa_init_dma(16)))
@@ -307,9 +355,11 @@ static int __init pxa25x_init(void)
 			return ret;
 	}
 
-	/* Only add HWUART for PXA255/26x; PXA210/250/27x do not have it. */
-	if (cpu_is_pxa25x())
+	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
+	if (cpu_is_pxa255() || cpu_is_pxa26x()) {
+		clks_register(&pxa25x_hwuart_clk, 1);
 		ret = platform_device_register(&pxa_device_hwuart);
+	}
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7e94583..3e4ab22 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -18,21 +18,29 @@
 #include <linux/platform_device.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/arch/irqs.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa27x.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/i2c.h>
+#include <mach/irqs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
 #include "clock.h"
 
+void pxa27x_clear_otgph(void)
+{
+	if (cpu_is_pxa27x() && (PSSR & PSSR_OTGPH))
+		PSSR |= PSSR_OTGPH;
+}
+EXPORT_SYMBOL(pxa27x_clear_otgph);
+
 /* Crystal clock: 13MHz */
 #define BASE_CLK	13000000
 
@@ -146,7 +154,7 @@ static struct clk pxa27x_clks[] = {
 
 	INIT_CKEN("I2SCLK",  I2S,  14682000, 0, &pxa_device_i2s.dev),
 	INIT_CKEN("I2CCLK",  I2C,  32842000, 0, &pxa_device_i2c.dev),
-	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa_device_udc.dev),
+	INIT_CKEN("UDCCLK",  USB,  48000000, 5, &pxa27x_device_udc.dev),
 	INIT_CKEN("MMCCLK",  MMC,  19500000, 0, &pxa_device_mci.dev),
 	INIT_CKEN("FICPCLK", FICP, 48000000, 0, &pxa_device_ficp.dev),
 
@@ -157,12 +165,13 @@ static struct clk pxa27x_clks[] = {
 	INIT_CKEN("SSPCLK", SSP1, 13000000, 0, &pxa27x_device_ssp1.dev),
 	INIT_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
 	INIT_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
+	INIT_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+	INIT_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
 
 	INIT_CKEN("AC97CLK",     AC97,     24576000, 0, NULL),
 	INIT_CKEN("AC97CONFCLK", AC97CONF, 24576000, 0, NULL),
 
 	/*
-	INIT_CKEN("PWMCLK",  PWM0, 13000000, 0, NULL),
 	INIT_CKEN("MSLCLK",  MSL,  48000000, 0, NULL),
 	INIT_CKEN("USIMCLK", USIM, 48000000, 0, NULL),
 	INIT_CKEN("MSTKCLK", MEMSTK, 19500000, 0, NULL),
@@ -181,36 +190,18 @@ static struct clk pxa27x_clks[] = {
  * More ones like CP and general purpose register values are preserved
  * with the stack pointer in sleep.S.
  */
-enum {	SLEEP_SAVE_PGSR0, SLEEP_SAVE_PGSR1, SLEEP_SAVE_PGSR2, SLEEP_SAVE_PGSR3,
-
-	SLEEP_SAVE_GAFR0_L, SLEEP_SAVE_GAFR0_U,
-	SLEEP_SAVE_GAFR1_L, SLEEP_SAVE_GAFR1_U,
-	SLEEP_SAVE_GAFR2_L, SLEEP_SAVE_GAFR2_U,
-	SLEEP_SAVE_GAFR3_L, SLEEP_SAVE_GAFR3_U,
-
+enum {
 	SLEEP_SAVE_PSTR,
-
 	SLEEP_SAVE_CKEN,
-
 	SLEEP_SAVE_MDREFR,
-	SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
-	SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
-
+	SLEEP_SAVE_PCFR,
 	SLEEP_SAVE_COUNT
 };
 
 void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 {
-	SAVE(PGSR0); SAVE(PGSR1); SAVE(PGSR2); SAVE(PGSR3);
-
-	SAVE(GAFR0_L); SAVE(GAFR0_U);
-	SAVE(GAFR1_L); SAVE(GAFR1_U);
-	SAVE(GAFR2_L); SAVE(GAFR2_U);
-	SAVE(GAFR3_L); SAVE(GAFR3_U);
-
 	SAVE(MDREFR);
-	SAVE(PWER); SAVE(PCFR); SAVE(PRER);
-	SAVE(PFER); SAVE(PKWR);
+	SAVE(PCFR);
 
 	SAVE(CKEN);
 	SAVE(PSTR);
@@ -218,24 +209,12 @@ void pxa27x_cpu_pm_save(unsigned long *sleep_save)
 
 void pxa27x_cpu_pm_restore(unsigned long *sleep_save)
 {
-	/* ensure not to come back here if it wasn't intended */
-	PSPR = 0;
-
-	/* restore registers */
-	RESTORE(GAFR0_L); RESTORE(GAFR0_U);
-	RESTORE(GAFR1_L); RESTORE(GAFR1_U);
-	RESTORE(GAFR2_L); RESTORE(GAFR2_U);
-	RESTORE(GAFR3_L); RESTORE(GAFR3_U);
-	RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2); RESTORE(PGSR3);
-
 	RESTORE(MDREFR);
-	RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
-	RESTORE(PFER); RESTORE(PKWR);
+	RESTORE(PCFR);
 
 	PSSR = PSSR_RDH | PSSR_PH;
 
 	RESTORE(CKEN);
-
 	RESTORE(PSTR);
 }
 
@@ -257,8 +236,6 @@ void pxa27x_cpu_pm_enter(suspend_state_t state)
 		pxa_cpu_standby();
 		break;
 	case PM_SUSPEND_MEM:
-		/* set resume return address */
-		PSPR = virt_to_phys(pxa_cpu_resume);
 		pxa27x_cpu_suspend(PWRMODE_SLEEP);
 		break;
 	}
@@ -269,12 +246,27 @@ static int pxa27x_cpu_pm_valid(suspend_state_t state)
 	return state == PM_SUSPEND_MEM || state == PM_SUSPEND_STANDBY;
 }
 
+static int pxa27x_cpu_pm_prepare(void)
+{
+	/* set resume return address */
+	PSPR = virt_to_phys(pxa_cpu_resume);
+	return 0;
+}
+
+static void pxa27x_cpu_pm_finish(void)
+{
+	/* ensure not to come back here if it wasn't intended */
+	PSPR = 0;
+}
+
 static struct pxa_cpu_pm_fns pxa27x_cpu_pm_fns = {
 	.save_count	= SLEEP_SAVE_COUNT,
 	.save		= pxa27x_cpu_pm_save,
 	.restore	= pxa27x_cpu_pm_restore,
 	.valid		= pxa27x_cpu_pm_valid,
 	.enter		= pxa27x_cpu_pm_enter,
+	.prepare	= pxa27x_cpu_pm_prepare,
+	.finish		= pxa27x_cpu_pm_finish,
 };
 
 static void __init pxa27x_init_pm(void)
@@ -347,13 +339,16 @@ struct platform_device pxa27x_device_i2c_power = {
 	.num_resources	= ARRAY_SIZE(i2c_power_resources),
 };
 
-void __init pxa_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 {
+	local_irq_disable();
+	PCFR |= PCFR_PI2CEN;
+	local_irq_enable();
 	pxa27x_device_i2c_power.dev.platform_data = info;
 }
 
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_udc,
+	&pxa27x_device_udc,
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
@@ -363,12 +358,16 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_ssp1,
 	&pxa27x_device_ssp2,
 	&pxa27x_device_ssp3,
+	&pxa27x_device_pwm0,
+	&pxa27x_device_pwm1,
 };
 
 static struct sys_device pxa27x_sysdev[] = {
 	{
 		.cls	= &pxa_irq_sysclass,
 	}, {
+		.cls	= &pxa2xx_mfp_sysclass,
+	}, {
 		.cls	= &pxa_gpio_sysclass,
 	},
 };
@@ -378,6 +377,9 @@ static int __init pxa27x_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa27x()) {
+
+		reset_status = RCSR;
+
 		clks_register(pxa27x_clks, ARRAY_SIZE(pxa27x_clks));
 
 		if ((ret = pxa_init_dma(32)))
diff --git a/arch/arm/mach-pxa/pxa2xx.c b/arch/arm/mach-pxa/pxa2xx.c
new file mode 100644
index 0000000..73d04d8
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa2xx.c
@@ -0,0 +1,55 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa2xx.c
+ *
+ * code specific to pxa2xx
+ *
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <mach/hardware.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa2xx.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+
+void pxa2xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with RCSR */
+	RCSR = mask;
+}
+
+static unsigned long pxa2xx_mfp_fir[] = {
+	GPIO46_FICP_RXD,
+	GPIO47_FICP_TXD,
+};
+
+static unsigned long pxa2xx_mfp_sir[] = {
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+};
+
+static unsigned long pxa2xx_mfp_off[] = {
+	GPIO46_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO47_GPIO | MFP_LPM_DRIVE_LOW,
+};
+
+void pxa2xx_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		pxa2xx_mfp_config(pxa2xx_mfp_off, ARRAY_SIZE(pxa2xx_mfp_off));
+	} else if (mode & IR_SIRMODE) {
+		pxa2xx_mfp_config(pxa2xx_mfp_sir, ARRAY_SIZE(pxa2xx_mfp_sir));
+	} else if (mode & IR_FIRMODE) {
+		pxa2xx_mfp_config(pxa2xx_mfp_fir, ARRAY_SIZE(pxa2xx_mfp_fir));
+	} else
+		BUG();
+}
diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c
index 0a0d387..9adc7fc 100644
--- a/arch/arm/mach-pxa/pxa300.c
+++ b/arch/arm/mach-pxa/pxa300.c
@@ -15,9 +15,15 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp-pxa300.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa300.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa300_mfp_addr_map[] __initdata = {
 
@@ -79,15 +85,28 @@ static struct pxa3xx_mfp_addr_map pxa310_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
+static struct clk common_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 156000000, 0, &pxa3xx_device_nand.dev),
+};
+
+static struct clk pxa310_clks[] = {
+#ifdef CONFIG_CPU_PXA310
+	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
+#endif
+};
+
 static int __init pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
 		pxa3xx_init_mfp();
 		pxa3xx_mfp_init_addr(pxa300_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(common_clks));
 	}
 
-	if (cpu_is_pxa310())
+	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_init_addr(pxa310_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa310_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c
index 74128eb..016eb18 100644
--- a/arch/arm/mach-pxa/pxa320.c
+++ b/arch/arm/mach-pxa/pxa320.c
@@ -15,10 +15,16 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
+#include <linux/platform_device.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/mfp.h>
-#include <asm/arch/mfp-pxa320.h>
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa320.h>
+
+#include "generic.h"
+#include "devices.h"
+#include "clock.h"
 
 static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 
@@ -74,16 +80,17 @@ static struct pxa3xx_mfp_addr_map pxa320_mfp_addr_map[] __initdata = {
 	MFP_ADDR_END,
 };
 
-static void __init pxa320_init_mfp(void)
-{
-	pxa3xx_init_mfp();
-	pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
-}
+static struct clk pxa320_clks[] = {
+	PXA3xx_CKEN("NANDCLK", NAND, 104000000, 0, &pxa3xx_device_nand.dev),
+};
 
 static int __init pxa320_init(void)
 {
-	if (cpu_is_pxa320())
-		pxa320_init_mfp();
+	if (cpu_is_pxa320()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa320_mfp_addr_map);
+		clks_register(ARRAY_AND_SIZE(pxa320_clks));
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 644550b..b3cd5d0 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -22,12 +22,13 @@
 #include <linux/io.h>
 #include <linux/sysdev.h>
 
-#include <asm/hardware.h>
-#include <asm/arch/pxa3xx-regs.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/dma.h>
-#include <asm/arch/ssp.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/reset.h>
+#include <mach/ohci.h>
+#include <mach/pm.h>
+#include <mach/dma.h>
+#include <mach/ssp.h>
 
 #include "generic.h"
 #include "devices.h"
@@ -109,6 +110,12 @@ unsigned int pxa3xx_get_memclk_frequency_10khz(void)
 	return (clk / 10000);
 }
 
+void pxa3xx_clear_reset_status(unsigned int mask)
+{
+	/* RESET_STATUS_* has a 1:1 mapping with ARSR */
+	ARSR = mask;
+}
+
 /*
  * Return the current AC97 clock frequency.
  */
@@ -144,7 +151,7 @@ static unsigned long clk_pxa3xx_hsio_getrate(struct clk *clk)
 	return hsio_clk;
 }
 
-static void clk_pxa3xx_cken_enable(struct clk *clk)
+void clk_pxa3xx_cken_enable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -154,7 +161,7 @@ static void clk_pxa3xx_cken_enable(struct clk *clk)
 		CKENB |= mask;
 }
 
-static void clk_pxa3xx_cken_disable(struct clk *clk)
+void clk_pxa3xx_cken_disable(struct clk *clk)
 {
 	unsigned long mask = 1ul << (clk->cken & 0x1f);
 
@@ -164,7 +171,7 @@ static void clk_pxa3xx_cken_disable(struct clk *clk)
 		CKENB &= ~mask;
 }
 
-static const struct clkops clk_pxa3xx_cken_ops = {
+const struct clkops clk_pxa3xx_cken_ops = {
 	.enable		= clk_pxa3xx_cken_enable,
 	.disable	= clk_pxa3xx_cken_disable,
 };
@@ -196,23 +203,18 @@ static const struct clkops clk_pout_ops = {
 	.disable	= clk_pout_disable,
 };
 
-#define PXA3xx_CKEN(_name, _cken, _rate, _delay, _dev)	\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= &clk_pxa3xx_cken_ops,		\
-		.rate	= _rate,			\
-		.cken	= CKEN_##_cken,			\
-		.delay	= _delay,			\
-	}
+static void clk_dummy_enable(struct clk *clk)
+{
+}
 
-#define PXA3xx_CK(_name, _cken, _ops, _dev)		\
-	{						\
-		.name	= _name,			\
-		.dev	= _dev,				\
-		.ops	= _ops,				\
-		.cken	= CKEN_##_cken,			\
-	}
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static const struct clkops clk_dummy_ops = {
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable,
+};
 
 static struct clk pxa3xx_clks[] = {
 	{
@@ -222,6 +224,13 @@ static struct clk pxa3xx_clks[] = {
 		.delay          = 70,
 	},
 
+	/* Power I2C clock is always on */
+	{
+		.name		= "I2CCLK",
+		.ops		= &clk_dummy_ops,
+		.dev		= &pxa3xx_device_i2c_power.dev,
+	},
+
 	PXA3xx_CK("LCDCLK",  LCD,    &clk_pxa3xx_hsio_ops, &pxa_device_fb.dev),
 	PXA3xx_CK("CAMCLK",  CAMERA, &clk_pxa3xx_hsio_ops, NULL),
 	PXA3xx_CK("AC97CLK", AC97,   &clk_pxa3xx_ac97_ops, NULL),
@@ -231,7 +240,7 @@ static struct clk pxa3xx_clks[] = {
 	PXA3xx_CKEN("UARTCLK", STUART, 14857000, 1, NULL),
 
 	PXA3xx_CKEN("I2CCLK", I2C,  32842000, 0, &pxa_device_i2c.dev),
-	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa_device_udc.dev),
+	PXA3xx_CKEN("UDCCLK", UDC,  48000000, 5, &pxa27x_device_udc.dev),
 	PXA3xx_CKEN("USBCLK", USBH, 48000000, 0, &pxa27x_device_ohci.dev),
 	PXA3xx_CKEN("KBDCLK", KEYPAD,  32768, 0, &pxa27x_device_keypad.dev),
 
@@ -239,10 +248,11 @@ static struct clk pxa3xx_clks[] = {
 	PXA3xx_CKEN("SSPCLK", SSP2, 13000000, 0, &pxa27x_device_ssp2.dev),
 	PXA3xx_CKEN("SSPCLK", SSP3, 13000000, 0, &pxa27x_device_ssp3.dev),
 	PXA3xx_CKEN("SSPCLK", SSP4, 13000000, 0, &pxa3xx_device_ssp4.dev),
+	PXA3xx_CKEN("PWMCLK", PWM0, 13000000, 0, &pxa27x_device_pwm0.dev),
+	PXA3xx_CKEN("PWMCLK", PWM1, 13000000, 0, &pxa27x_device_pwm1.dev),
 
 	PXA3xx_CKEN("MMCCLK", MMC1, 19500000, 0, &pxa_device_mci.dev),
 	PXA3xx_CKEN("MMCCLK", MMC2, 19500000, 0, &pxa3xx_device_mci2.dev),
-	PXA3xx_CKEN("MMCCLK", MMC3, 19500000, 0, &pxa3xx_device_mci3.dev),
 };
 
 #ifdef CONFIG_PM
@@ -519,8 +529,32 @@ void __init pxa3xx_init_irq(void)
  * device registration specific to PXA3xx.
  */
 
+static struct resource i2c_power_resources[] = {
+	{
+		.start  = 0x40f500c0,
+		.end    = 0x40f500d3,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_PWRI2C,
+		.end	= IRQ_PWRI2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device pxa3xx_device_i2c_power = {
+	.name		= "pxa2xx-i2c",
+	.id		= 1,
+	.resource	= i2c_power_resources,
+	.num_resources	= ARRAY_SIZE(i2c_power_resources),
+};
+
+void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
+{
+	pxa3xx_device_i2c_power.dev.platform_data = info;
+}
+
 static struct platform_device *devices[] __initdata = {
-	&pxa_device_udc,
+/*	&pxa_device_udc,	The UDC driver is PXA25x only */
 	&pxa_device_ffuart,
 	&pxa_device_btuart,
 	&pxa_device_stuart,
@@ -530,6 +564,9 @@ static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_ssp2,
 	&pxa27x_device_ssp3,
 	&pxa3xx_device_ssp4,
+	&pxa27x_device_pwm0,
+	&pxa27x_device_pwm1,
+	&pxa3xx_device_i2c_power,
 };
 
 static struct sys_device pxa3xx_sysdev[] = {
@@ -547,6 +584,9 @@ static int __init pxa3xx_init(void)
 	int i, ret = 0;
 
 	if (cpu_is_pxa3xx()) {
+
+		reset_status = ARSR;
+
 		/*
 		 * clear RDH bit every time after reset
 		 *
diff --git a/arch/arm/mach-pxa/pxa930.c b/arch/arm/mach-pxa/pxa930.c
new file mode 100644
index 0000000..13e6bfd
--- /dev/null
+++ b/arch/arm/mach-pxa/pxa930.c
@@ -0,0 +1,190 @@
+/*
+ * linux/arch/arm/mach-pxa/pxa930.c
+ *
+ * Code specific to PXA930
+ *
+ * Copyright (C) 2007-2008 Marvell Internation Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/dma-mapping.h>
+
+#include <mach/hardware.h>
+#include <mach/mfp-pxa930.h>
+
+static struct pxa3xx_mfp_addr_map pxa930_mfp_addr_map[] __initdata = {
+
+	MFP_ADDR(GPIO0, 0x02e0),
+	MFP_ADDR(GPIO1, 0x02dc),
+	MFP_ADDR(GPIO2, 0x02e8),
+	MFP_ADDR(GPIO3, 0x02d8),
+	MFP_ADDR(GPIO4, 0x02e4),
+	MFP_ADDR(GPIO5, 0x02ec),
+	MFP_ADDR(GPIO6, 0x02f8),
+	MFP_ADDR(GPIO7, 0x02fc),
+	MFP_ADDR(GPIO8, 0x0300),
+	MFP_ADDR(GPIO9, 0x02d4),
+	MFP_ADDR(GPIO10, 0x02f4),
+	MFP_ADDR(GPIO11, 0x02f0),
+	MFP_ADDR(GPIO12, 0x0304),
+	MFP_ADDR(GPIO13, 0x0310),
+	MFP_ADDR(GPIO14, 0x0308),
+	MFP_ADDR(GPIO15, 0x030c),
+	MFP_ADDR(GPIO16, 0x04e8),
+	MFP_ADDR(GPIO17, 0x04f4),
+	MFP_ADDR(GPIO18, 0x04f8),
+	MFP_ADDR(GPIO19, 0x04fc),
+	MFP_ADDR(GPIO20, 0x0518),
+	MFP_ADDR(GPIO21, 0x051c),
+	MFP_ADDR(GPIO22, 0x04ec),
+	MFP_ADDR(GPIO23, 0x0500),
+	MFP_ADDR(GPIO24, 0x04f0),
+	MFP_ADDR(GPIO25, 0x0504),
+	MFP_ADDR(GPIO26, 0x0510),
+	MFP_ADDR(GPIO27, 0x0514),
+	MFP_ADDR(GPIO28, 0x0520),
+	MFP_ADDR(GPIO29, 0x0600),
+	MFP_ADDR(GPIO30, 0x0618),
+	MFP_ADDR(GPIO31, 0x0610),
+	MFP_ADDR(GPIO32, 0x060c),
+	MFP_ADDR(GPIO33, 0x061c),
+	MFP_ADDR(GPIO34, 0x0620),
+	MFP_ADDR(GPIO35, 0x0628),
+	MFP_ADDR(GPIO36, 0x062c),
+	MFP_ADDR(GPIO37, 0x0630),
+	MFP_ADDR(GPIO38, 0x0634),
+	MFP_ADDR(GPIO39, 0x0638),
+	MFP_ADDR(GPIO40, 0x063c),
+	MFP_ADDR(GPIO41, 0x0614),
+	MFP_ADDR(GPIO42, 0x0624),
+	MFP_ADDR(GPIO43, 0x0608),
+	MFP_ADDR(GPIO44, 0x0604),
+	MFP_ADDR(GPIO45, 0x050c),
+	MFP_ADDR(GPIO46, 0x0508),
+	MFP_ADDR(GPIO47, 0x02bc),
+	MFP_ADDR(GPIO48, 0x02b4),
+	MFP_ADDR(GPIO49, 0x02b8),
+	MFP_ADDR(GPIO50, 0x02c8),
+	MFP_ADDR(GPIO51, 0x02c0),
+	MFP_ADDR(GPIO52, 0x02c4),
+	MFP_ADDR(GPIO53, 0x02d0),
+	MFP_ADDR(GPIO54, 0x02cc),
+	MFP_ADDR(GPIO55, 0x029c),
+	MFP_ADDR(GPIO56, 0x02a0),
+	MFP_ADDR(GPIO57, 0x0294),
+	MFP_ADDR(GPIO58, 0x0298),
+	MFP_ADDR(GPIO59, 0x02a4),
+	MFP_ADDR(GPIO60, 0x02a8),
+	MFP_ADDR(GPIO61, 0x02b0),
+	MFP_ADDR(GPIO62, 0x02ac),
+	MFP_ADDR(GPIO63, 0x0640),
+	MFP_ADDR(GPIO64, 0x065c),
+	MFP_ADDR(GPIO65, 0x0648),
+	MFP_ADDR(GPIO66, 0x0644),
+	MFP_ADDR(GPIO67, 0x0674),
+	MFP_ADDR(GPIO68, 0x0658),
+	MFP_ADDR(GPIO69, 0x0654),
+	MFP_ADDR(GPIO70, 0x0660),
+	MFP_ADDR(GPIO71, 0x0668),
+	MFP_ADDR(GPIO72, 0x0664),
+	MFP_ADDR(GPIO73, 0x0650),
+	MFP_ADDR(GPIO74, 0x066c),
+	MFP_ADDR(GPIO75, 0x064c),
+	MFP_ADDR(GPIO76, 0x0670),
+	MFP_ADDR(GPIO77, 0x0678),
+	MFP_ADDR(GPIO78, 0x067c),
+	MFP_ADDR(GPIO79, 0x0694),
+	MFP_ADDR(GPIO80, 0x069c),
+	MFP_ADDR(GPIO81, 0x06a0),
+	MFP_ADDR(GPIO82, 0x06a4),
+	MFP_ADDR(GPIO83, 0x0698),
+	MFP_ADDR(GPIO84, 0x06bc),
+	MFP_ADDR(GPIO85, 0x06b4),
+	MFP_ADDR(GPIO86, 0x06b0),
+	MFP_ADDR(GPIO87, 0x06c0),
+	MFP_ADDR(GPIO88, 0x06c4),
+	MFP_ADDR(GPIO89, 0x06ac),
+	MFP_ADDR(GPIO90, 0x0680),
+	MFP_ADDR(GPIO91, 0x0684),
+	MFP_ADDR(GPIO92, 0x0688),
+	MFP_ADDR(GPIO93, 0x0690),
+	MFP_ADDR(GPIO94, 0x068c),
+	MFP_ADDR(GPIO95, 0x06a8),
+	MFP_ADDR(GPIO96, 0x06b8),
+	MFP_ADDR(GPIO97, 0x0410),
+	MFP_ADDR(GPIO98, 0x0418),
+	MFP_ADDR(GPIO99, 0x041c),
+	MFP_ADDR(GPIO100, 0x0414),
+	MFP_ADDR(GPIO101, 0x0408),
+	MFP_ADDR(GPIO102, 0x0324),
+	MFP_ADDR(GPIO103, 0x040c),
+	MFP_ADDR(GPIO104, 0x0400),
+	MFP_ADDR(GPIO105, 0x0328),
+	MFP_ADDR(GPIO106, 0x0404),
+
+	MFP_ADDR(nXCVREN, 0x0204),
+	MFP_ADDR(DF_CLE_nOE, 0x020c),
+	MFP_ADDR(DF_nADV1_ALE, 0x0218),
+	MFP_ADDR(DF_SCLK_E, 0x0214),
+	MFP_ADDR(DF_SCLK_S, 0x0210),
+	MFP_ADDR(nBE0, 0x021c),
+	MFP_ADDR(nBE1, 0x0220),
+	MFP_ADDR(DF_nADV2_ALE, 0x0224),
+	MFP_ADDR(DF_INT_RnB, 0x0228),
+	MFP_ADDR(DF_nCS0, 0x022c),
+	MFP_ADDR(DF_nCS1, 0x0230),
+	MFP_ADDR(nLUA, 0x0254),
+	MFP_ADDR(nLLA, 0x0258),
+	MFP_ADDR(DF_nWE, 0x0234),
+	MFP_ADDR(DF_nRE_nOE, 0x0238),
+	MFP_ADDR(DF_ADDR0, 0x024c),
+	MFP_ADDR(DF_ADDR1, 0x0250),
+	MFP_ADDR(DF_ADDR2, 0x025c),
+	MFP_ADDR(DF_ADDR3, 0x0260),
+	MFP_ADDR(DF_IO0, 0x023c),
+	MFP_ADDR(DF_IO1, 0x0240),
+	MFP_ADDR(DF_IO2, 0x0244),
+	MFP_ADDR(DF_IO3, 0x0248),
+	MFP_ADDR(DF_IO4, 0x0264),
+	MFP_ADDR(DF_IO5, 0x0268),
+	MFP_ADDR(DF_IO6, 0x026c),
+	MFP_ADDR(DF_IO7, 0x0270),
+	MFP_ADDR(DF_IO8, 0x0274),
+	MFP_ADDR(DF_IO9, 0x0278),
+	MFP_ADDR(DF_IO10, 0x027c),
+	MFP_ADDR(DF_IO11, 0x0280),
+	MFP_ADDR(DF_IO12, 0x0284),
+	MFP_ADDR(DF_IO13, 0x0288),
+	MFP_ADDR(DF_IO14, 0x028c),
+	MFP_ADDR(DF_IO15, 0x0290),
+
+	MFP_ADDR(GSIM_UIO, 0x0314),
+	MFP_ADDR(GSIM_UCLK, 0x0318),
+	MFP_ADDR(GSIM_UDET, 0x031c),
+	MFP_ADDR(GSIM_nURST, 0x0320),
+
+	MFP_ADDR(PMIC_INT, 0x06c8),
+
+	MFP_ADDR(RDY, 0x0200),
+
+	MFP_ADDR_END,
+};
+
+static int __init pxa930_init(void)
+{
+	if (cpu_is_pxa930()) {
+		pxa3xx_init_mfp();
+		pxa3xx_mfp_init_addr(pxa930_mfp_addr_map);
+	}
+
+	return 0;
+}
+
+core_initcall(pxa930_init);
diff --git a/arch/arm/mach-pxa/reset.c b/arch/arm/mach-pxa/reset.c
new file mode 100644
index 0000000..1b2af57
--- /dev/null
+++ b/arch/arm/mach-pxa/reset.c
@@ -0,0 +1,101 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/reset.h>
+
+unsigned int reset_status;
+EXPORT_SYMBOL(reset_status);
+
+static void do_hw_reset(void);
+
+static int reset_gpio = -1;
+
+int init_gpio_reset(int gpio, int output)
+{
+	int rc;
+
+	rc = gpio_request(gpio, "reset generator");
+	if (rc) {
+		printk(KERN_ERR "Can't request reset_gpio\n");
+		goto out;
+	}
+
+	if (output)
+		rc = gpio_direction_output(gpio, 0);
+	else
+		rc = gpio_direction_input(gpio);
+	if (rc) {
+		printk(KERN_ERR "Can't configure reset_gpio\n");
+		gpio_free(gpio);
+		goto out;
+	}
+
+out:
+	if (!rc)
+		reset_gpio = gpio;
+
+	return rc;
+}
+
+/*
+ * Trigger GPIO reset.
+ * This covers various types of logic connecting gpio pin
+ * to RESET pins (nRESET or GPIO_RESET):
+ */
+static void do_gpio_reset(void)
+{
+	BUG_ON(reset_gpio == -1);
+
+	/* drive it low */
+	gpio_direction_output(reset_gpio, 0);
+	mdelay(2);
+	/* rising edge or drive high */
+	gpio_set_value(reset_gpio, 1);
+	mdelay(2);
+	/* falling edge */
+	gpio_set_value(reset_gpio, 0);
+
+	/* give it some time */
+	mdelay(10);
+
+	WARN_ON(1);
+	/* fallback */
+	do_hw_reset();
+}
+
+static void do_hw_reset(void)
+{
+	/* Initialize the watchdog and let it fire */
+	OWER = OWER_WME;
+	OSSR = OSSR_M3;
+	OSMR3 = OSCR + 368640;	/* ... in 100 ms */
+}
+
+void arch_reset(char mode)
+{
+	clear_reset_status(RESET_STATUS_ALL);
+
+	switch (mode) {
+	case 's':
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+		break;
+	case 'h':
+		do_hw_reset();
+		break;
+	case 'g':
+		do_gpio_reset();
+		break;
+	}
+}
+
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
new file mode 100644
index 0000000..e7ea91c
--- /dev/null
+++ b/arch/arm/mach-pxa/saar.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/saar.c
+ *
+ *  Support for the Marvell PXA930 Handheld Platform (aka SAAR)
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* SAAR MFP configurations */
+static mfp_cfg_t saar_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO97_GPIO,
+};
+
+#define SAAR_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (SAAR_ETH_PHYS + 0x300),
+		.end	= (SAAR_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO97)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata saar_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &saar_smc91x_info,
+	},
+};
+
+static void __init saar_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = saar_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 34cd585..15c2f1a 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -22,12 +22,12 @@
 #include <linux/platform_device.h>
 #include <linux/apm-emulation.h>
 
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/arch/pm.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pm.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
 #include "sharpsl.h"
 
 struct battery_thresh spitz_battery_levels_acin[] = {
@@ -116,24 +116,20 @@ struct battery_thresh  spitz_battery_levels_noac[] = {
 	{   0,   0},
 };
 
-/* MAX1111 Commands */
-#define MAXCTRL_PD0      1u << 0
-#define MAXCTRL_PD1      1u << 1
-#define MAXCTRL_SGL      1u << 2
-#define MAXCTRL_UNI      1u << 3
-#define MAXCTRL_SEL_SH   4
-#define MAXCTRL_STR      1u << 7
-
 /*
  * Read MAX1111 ADC
  */
+extern int max1111_read_channel(int);
+
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
 	if (machine_is_tosa()) // Ugly, better move this function into another module
 	    return 0;
 
-	return corgi_ssp_max1111_get((channel << MAXCTRL_SEL_SH) | MAXCTRL_PD0 | MAXCTRL_PD1
-			| MAXCTRL_SGL | MAXCTRL_UNI | MAXCTRL_STR);
+	/* max1111 accepts channels from 0-3, however,
+	 * it is encoded from 0-7 here in the code.
+	 */
+	return max1111_read_channel(channel >> 1);
 }
 
 void sharpsl_pm_pxa_init(void)
@@ -146,18 +142,18 @@ void sharpsl_pm_pxa_init(void)
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin), sharpsl_ac_isr, IRQF_DISABLED, "AC Input Detect", sharpsl_ac_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQT_BOTHEDGE);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_acin),IRQ_TYPE_EDGE_BOTH);
 
 	if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock), sharpsl_fatal_isr, IRQF_DISABLED, "Battery Cover", sharpsl_fatal_isr)) {
 		dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock));
 	}
-	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQT_FALLING);
+	else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batlock),IRQ_TYPE_EDGE_FALLING);
 
 	if (sharpsl_pm.machinfo->gpio_fatal) {
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal), sharpsl_fatal_isr, IRQF_DISABLED, "Fatal Battery", sharpsl_fatal_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQT_FALLING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_fatal),IRQ_TYPE_EDGE_FALLING);
 	}
 
 	if (sharpsl_pm.machinfo->batfull_irq)
@@ -166,7 +162,7 @@ void sharpsl_pm_pxa_init(void)
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
 		}
-		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQT_RISING);
+		else set_irq_type(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull),IRQ_TYPE_EDGE_RISING);
 	}
 }
 
diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S
index 784716e..a62c837 100644
--- a/arch/arm/mach-pxa/sleep.S
+++ b/arch/arm/mach-pxa/sleep.S
@@ -13,10 +13,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 #define MDREFR_KDIV	0x200a4000	// all banks
 #define CCCR_SLEEP	0x00000107	// L=7 2N=2 A=0 PPDIS=0 CPDIS=0
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index e7d0fcd..524f656 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -19,33 +19,43 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
 #include <linux/mmc/host.h>
 #include <linux/pm.h>
 #include <linux/backlight.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/spi/corgi_lcd.h>
 
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 #include <asm/irq.h>
-#include <asm/io.h>
 #include <asm/system.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/ohci.h>
-#include <asm/arch/udc.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/akita.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/sharpsl.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/reset.h>
+#include <mach/i2c.h>
+#include <mach/irda.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/spitz.h>
+#include <mach/sharpsl.h>
 
 #include <asm/mach/sharpsl_param.h>
 #include <asm/hardware/scoop.h>
@@ -54,6 +64,66 @@
 #include "devices.h"
 #include "sharpsl.h"
 
+static unsigned long spitz_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO78_nCS_2,	/* SCOOP #2 */
+	GPIO80_nCS_4,	/* SCOOP #1 */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+
+	/* PC Card */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+
+	/* MMC */
+	GPIO32_MMC_CLK,
+	GPIO112_MMC_CMD,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+
+	/* GPIOs */
+	GPIO9_GPIO,	/* SPITZ_GPIO_nSD_DETECT */
+	GPIO81_GPIO,	/* SPITZ_GPIO_nSD_WP */
+	GPIO41_GPIO,	/* SPITZ_GPIO_USB_CONNECT */
+	GPIO37_GPIO,	/* SPITZ_GPIO_USB_HOST */
+	GPIO35_GPIO,	/* SPITZ_GPIO_USB_DEVICE */
+	GPIO22_GPIO,	/* SPITZ_GPIO_HSYNC */
+	GPIO94_GPIO,	/* SPITZ_GPIO_CF_CD */
+	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
+	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
+
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
+};
+
 /*
  * Spitz SCOOP Device #1
  */
@@ -66,10 +136,11 @@ static struct resource spitz_scoop_resources[] = {
 };
 
 static struct scoop_config spitz_scoop_setup = {
-	.io_dir 	= SPITZ_SCP_IO_DIR,
+	.io_dir		= SPITZ_SCP_IO_DIR,
 	.io_out		= SPITZ_SCP_IO_OUT,
-	.suspend_clr = SPITZ_SCP_SUS_CLR,
-	.suspend_set = SPITZ_SCP_SUS_SET,
+	.suspend_clr	= SPITZ_SCP_SUS_CLR,
+	.suspend_set	= SPITZ_SCP_SUS_SET,
+	.gpio_base	= SPITZ_SCP_GPIO_BASE,
 };
 
 struct platform_device spitzscoop_device = {
@@ -94,10 +165,11 @@ static struct resource spitz_scoop2_resources[] = {
 };
 
 static struct scoop_config spitz_scoop2_setup = {
-	.io_dir 	= SPITZ_SCP2_IO_DIR,
+	.io_dir		= SPITZ_SCP2_IO_DIR,
 	.io_out		= SPITZ_SCP2_IO_OUT,
-	.suspend_clr = SPITZ_SCP2_SUS_CLR,
-	.suspend_set = SPITZ_SCP2_SUS_SET,
+	.suspend_clr	= SPITZ_SCP2_SUS_CLR,
+	.suspend_set	= SPITZ_SCP2_SUS_SET,
+	.gpio_base	= SPITZ_SCP2_GPIO_BASE,
 };
 
 struct platform_device spitzscoop2_device = {
@@ -119,7 +191,7 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 	unsigned short cpr = read_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR);
 
 	if (new_cpr & 0x0007) {
-	        set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+		gpio_set_value(SPITZ_GPIO_CF_POWER, 1);
 		if (!(cpr & 0x0002) && !(cpr & 0x0004))
 		        mdelay(5);
 		if (device == SPITZ_PWR_CF)
@@ -135,34 +207,13 @@ static void spitz_card_pwr_ctrl(int device, unsigned short new_cpr)
 		if (!(cpr & 0x0002) && !(cpr & 0x0004)) {
 			write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, 0x0000);
 		        mdelay(1);
-		        reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CF_POWER);
+			gpio_set_value(SPITZ_GPIO_CF_POWER, 0);
 		} else {
 		        write_scoop_reg(&spitzscoop_device.dev, SCOOP_CPR, cpr | new_cpr);
 		}
 	}
 }
 
-static void spitz_pcmcia_init(void)
-{
-	/* Setup default state of GPIO outputs
-	   before we enable them as outputs. */
-	GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
-		GPIO_bit(GPIO49_nPWE) |	GPIO_bit(GPIO50_nPIOR) |
-		GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO54_nPCE_2);
-	GPSR(GPIO85_nPCE_1) = GPIO_bit(GPIO85_nPCE_1);
-
-	pxa_gpio_mode(GPIO48_nPOE_MD);
-	pxa_gpio_mode(GPIO49_nPWE_MD);
-	pxa_gpio_mode(GPIO50_nPIOR_MD);
-	pxa_gpio_mode(GPIO51_nPIOW_MD);
-	pxa_gpio_mode(GPIO55_nPREG_MD);
-	pxa_gpio_mode(GPIO56_nPWAIT_MD);
-	pxa_gpio_mode(GPIO57_nIOIS16_MD);
-	pxa_gpio_mode(GPIO85_nPCE_1_MD);
-	pxa_gpio_mode(GPIO54_nPCE_2_MD);
-	pxa_gpio_mode(GPIO104_pSKTSEL_MD);
-}
-
 static void spitz_pcmcia_pwr(struct device *scoop, unsigned short cpr, int nr)
 {
 	/* Only need to override behaviour for slot 0 */
@@ -188,165 +239,169 @@ static struct scoop_pcmcia_dev spitz_pcmcia_scoop[] = {
 static struct scoop_pcmcia_config spitz_pcmcia_config = {
 	.devs         = &spitz_pcmcia_scoop[0],
 	.num_devs     = 2,
-	.pcmcia_init  = spitz_pcmcia_init,
 	.power_ctrl   = spitz_pcmcia_pwr,
 };
 
 EXPORT_SYMBOL(spitzscoop_device);
 EXPORT_SYMBOL(spitzscoop2_device);
 
-
 /*
- * Spitz SSP Device
- *
- * Set the parent as the scoop device because a lot of SSP devices
- * also use scoop functions and this makes the power up/down order
- * work correctly.
+ * Spitz Keyboard Device
  */
-struct platform_device spitzssp_device = {
-	.name		= "corgi-ssp",
-	.dev		= {
- 		.parent = &spitzscoop_device.dev,
-	},
+static struct platform_device spitzkbd_device = {
+	.name		= "spitz-keyboard",
 	.id		= -1,
 };
 
-struct corgissp_machinfo spitz_ssp_machinfo = {
-	.port		= 2,
-	.cs_lcdcon	= SPITZ_GPIO_LCDCON_CS,
-	.cs_ads7846	= SPITZ_GPIO_ADS7846_CS,
-	.cs_max1111	= SPITZ_GPIO_MAX1111_CS,
-	.clk_lcdcon	= 520,
-	.clk_ads7846	= 14,
-	.clk_max1111	= 56,
-};
-
 
 /*
- * Spitz Backlight Device
+ * Spitz LEDs
  */
-static void spitz_bl_kick_battery(void)
-{
-	void (*kick_batt)(void);
-
-	kick_batt = symbol_get(sharpsl_battery_kick);
-	if (kick_batt) {
-		kick_batt();
-		symbol_put(sharpsl_battery_kick);
-	}
-}
-
-static struct generic_bl_info spitz_bl_machinfo = {
-	.name = "corgi-bl",
-	.default_intensity = 0x1f,
-	.limit_mask = 0x0b,
-	.max_intensity = 0x2f,
-	.kick_battery = spitz_bl_kick_battery,
-};
-
-static struct platform_device spitzbl_device = {
-	.name		= "generic-bl",
-	.dev		= {
- 		.platform_data	= &spitz_bl_machinfo,
+static struct gpio_led spitz_gpio_leds[] = {
+	{
+		.name			= "spitz:amber:charge",
+		.default_trigger	= "sharpsl-charge",
+		.gpio			= SPITZ_GPIO_LED_ORANGE,
+	},
+	{
+		.name			= "spitz:green:hddactivity",
+		.default_trigger	= "ide-disk",
+		.gpio			= SPITZ_GPIO_LED_GREEN,
 	},
-	.id		= -1,
 };
 
-
-/*
- * Spitz Keyboard Device
- */
-static struct platform_device spitzkbd_device = {
-	.name		= "spitz-keyboard",
-	.id		= -1,
+static struct gpio_led_platform_data spitz_gpio_leds_info = {
+	.leds		= spitz_gpio_leds,
+	.num_leds	= ARRAY_SIZE(spitz_gpio_leds),
 };
 
-
-/*
- * Spitz LEDs
- */
 static struct platform_device spitzled_device = {
-	.name		= "spitz-led",
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &spitz_gpio_leds_info,
+	},
 };
 
-/*
- * Spitz Touch Screen Device
- */
+#if defined(CONFIG_SPI_PXA2XX) || defined(CONFIG_SPI_PXA2XX_MODULE)
+static struct pxa2xx_spi_master spitz_spi_info = {
+	.num_chipselect	= 3,
+};
 
-static unsigned long (*get_hsync_invperiod)(struct device *dev);
+static struct ads7846_platform_data spitz_ads7846_info = {
+	.model			= 7846,
+	.vref_delay_usecs	= 100,
+	.x_plate_ohms		= 419,
+	.y_plate_ohms		= 486,
+	.gpio_pendown		= SPITZ_GPIO_TP_INT,
+};
 
-static void inline sharpsl_wait_sync(int gpio)
+static void spitz_ads7846_cs(u32 command)
 {
-	while((GPLR(gpio) & GPIO_bit(gpio)) == 0);
-	while((GPLR(gpio) & GPIO_bit(gpio)) != 0);
+	gpio_set_value(SPITZ_GPIO_ADS7846_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct device *spitz_pxafb_dev;
+static struct pxa2xx_spi_chip spitz_ads7846_chip = {
+	.cs_control		= spitz_ads7846_cs,
+};
 
-static int is_pxafb_device(struct device * dev, void * data)
+static void spitz_bl_kick_battery(void)
 {
-	struct platform_device *pdev = container_of(dev, struct platform_device, dev);
-
-	return (strncmp(pdev->name, "pxa2xx-fb", 9) == 0);
-}
+	void (*kick_batt)(void);
 
-static unsigned long spitz_get_hsync_invperiod(void)
-{
-#ifdef CONFIG_FB_PXA
-	if (!spitz_pxafb_dev) {
-		spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device);
-		if (!spitz_pxafb_dev)
-			return 0;
+	kick_batt = symbol_get(sharpsl_battery_kick);
+	if (kick_batt) {
+		kick_batt();
+		symbol_put(sharpsl_battery_kick);
 	}
-	if (!get_hsync_invperiod)
-		get_hsync_invperiod = symbol_get(pxafb_get_hsync_time);
-	if (!get_hsync_invperiod)
-#endif
-		return 0;
-
-	return get_hsync_invperiod(spitz_pxafb_dev);
 }
 
-static void spitz_put_hsync(void)
-{
-	put_device(spitz_pxafb_dev);
-	if (get_hsync_invperiod)
-		symbol_put(pxafb_get_hsync_time);
-	spitz_pxafb_dev = NULL;
-	get_hsync_invperiod = NULL;
-}
+static struct corgi_lcd_platform_data spitz_lcdcon_info = {
+	.init_mode		= CORGI_LCD_MODE_VGA,
+	.max_intensity		= 0x2f,
+	.default_intensity	= 0x1f,
+	.limit_mask		= 0x0b,
+	.gpio_backlight_cont	= SPITZ_GPIO_BACKLIGHT_CONT,
+	.gpio_backlight_on	= SPITZ_GPIO_BACKLIGHT_ON,
+	.kick_battery		= spitz_bl_kick_battery,
+};
 
-static void spitz_wait_hsync(void)
+static void spitz_lcdcon_cs(u32 command)
 {
-	sharpsl_wait_sync(SPITZ_GPIO_HSYNC);
+	gpio_set_value(SPITZ_GPIO_LCDCON_CS, !(command == PXA2XX_CS_ASSERT));
 }
 
-static struct resource spitzts_resources[] = {
-	[0] = {
-		.start		= SPITZ_IRQ_GPIO_TP_INT,
-		.end		= SPITZ_IRQ_GPIO_TP_INT,
-		.flags		= IORESOURCE_IRQ,
-	},
+static struct pxa2xx_spi_chip spitz_lcdcon_chip = {
+	.cs_control	= spitz_lcdcon_cs,
 };
 
-static struct corgits_machinfo  spitz_ts_machinfo = {
-	.get_hsync_invperiod = spitz_get_hsync_invperiod,
-	.put_hsync           = spitz_put_hsync,
-	.wait_hsync          = spitz_wait_hsync,
+static void spitz_max1111_cs(u32 command)
+{
+	gpio_set_value(SPITZ_GPIO_MAX1111_CS, !(command == PXA2XX_CS_ASSERT));
+}
+
+static struct pxa2xx_spi_chip spitz_max1111_chip = {
+	.cs_control	= spitz_max1111_cs,
 };
 
-static struct platform_device spitzts_device = {
-	.name		= "corgi-ts",
-	.dev		= {
- 		.parent = &spitzssp_device.dev,
-		.platform_data	= &spitz_ts_machinfo,
+static struct spi_board_info spitz_spi_devices[] = {
+	{
+		.modalias	= "ads7846",
+		.max_speed_hz	= 1200000,
+		.bus_num	= 2,
+		.chip_select	= 0,
+		.platform_data	= &spitz_ads7846_info,
+		.controller_data= &spitz_ads7846_chip,
+		.irq		= gpio_to_irq(SPITZ_GPIO_TP_INT),
+	}, {
+		.modalias	= "corgi-lcd",
+		.max_speed_hz	= 50000,
+		.bus_num	= 2,
+		.chip_select	= 1,
+		.platform_data	= &spitz_lcdcon_info,
+		.controller_data= &spitz_lcdcon_chip,
+	}, {
+		.modalias	= "max1111",
+		.max_speed_hz	= 450000,
+		.bus_num	= 2,
+		.chip_select	= 2,
+		.controller_data= &spitz_max1111_chip,
 	},
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(spitzts_resources),
-	.resource	= spitzts_resources,
 };
 
+static void __init spitz_init_spi(void)
+{
+	int err;
+
+	err = gpio_request(SPITZ_GPIO_ADS7846_CS, "ADS7846_CS");
+	if (err)
+		return;
+
+	err = gpio_request(SPITZ_GPIO_LCDCON_CS, "LCDCON_CS");
+	if (err)
+		goto err_free_1;
+
+	err = gpio_request(SPITZ_GPIO_MAX1111_CS, "MAX1111_CS");
+	if (err)
+		goto err_free_2;
+
+	if (machine_is_akita()) {
+		spitz_lcdcon_info.gpio_backlight_cont = AKITA_GPIO_BACKLIGHT_CONT;
+		spitz_lcdcon_info.gpio_backlight_on = AKITA_GPIO_BACKLIGHT_ON;
+	}
+
+	pxa2xx_set_spi_info(2, &spitz_spi_info);
+	spi_register_board_info(ARRAY_AND_SIZE(spitz_spi_devices));
+	return;
+
+err_free_2:
+	gpio_free(SPITZ_GPIO_LCDCON_CS);
+err_free_1:
+	gpio_free(SPITZ_GPIO_ADS7846_CS);
+}
+#else
+static inline void spitz_init_spi(void) {}
+#endif
 
 /*
  * MMC/SD Device
@@ -361,24 +416,35 @@ static int spitz_mci_init(struct device *dev, irq_handler_t spitz_detect_int, vo
 {
 	int err;
 
-	/* setup GPIO for PXA27x MMC controller	*/
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-	pxa_gpio_mode(SPITZ_GPIO_nSD_DETECT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_nSD_WP | GPIO_IN);
+	err = gpio_request(SPITZ_GPIO_nSD_DETECT, "nSD_DETECT");
+	if (err)
+		goto err_out;
+
+	err = gpio_request(SPITZ_GPIO_nSD_WP, "nSD_WP");
+	if (err)
+		goto err_free_1;
+
+	gpio_direction_input(SPITZ_GPIO_nSD_DETECT);
+	gpio_direction_input(SPITZ_GPIO_nSD_WP);
 
 	spitz_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
 	err = request_irq(SPITZ_IRQ_GPIO_nSD_DETECT, spitz_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+			  IRQF_DISABLED | IRQF_TRIGGER_RISING |
+			  IRQF_TRIGGER_FALLING,
 			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "spitz_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
+	if (err) {
+		pr_err("%s: MMC/SD: can't request MMC card detect IRQ\n",
+				__func__);
+		goto err_free_2;
+	}
+	return 0;
 
+err_free_2:
+	gpio_free(SPITZ_GPIO_nSD_WP);
+err_free_1:
+	gpio_free(SPITZ_GPIO_nSD_DETECT);
+err_out:
 	return err;
 }
 
@@ -394,12 +460,14 @@ static void spitz_mci_setpower(struct device *dev, unsigned int vdd)
 
 static int spitz_mci_get_ro(struct device *dev)
 {
-	return GPLR(SPITZ_GPIO_nSD_WP) & GPIO_bit(SPITZ_GPIO_nSD_WP);
+	return gpio_get_value(SPITZ_GPIO_nSD_WP);
 }
 
 static void spitz_mci_exit(struct device *dev, void *data)
 {
 	free_irq(SPITZ_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(SPITZ_GPIO_nSD_WP);
+	gpio_free(SPITZ_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data spitz_mci_platform_data = {
@@ -416,27 +484,24 @@ static struct pxamci_platform_data spitz_mci_platform_data = {
  */
 static int spitz_ohci_init(struct device *dev)
 {
-	/* Only Port 2 is connected */
-	pxa_gpio_mode(SPITZ_GPIO_USB_CONNECT | GPIO_IN);
-	pxa_gpio_mode(SPITZ_GPIO_USB_HOST | GPIO_OUT);
-	pxa_gpio_mode(SPITZ_GPIO_USB_DEVICE | GPIO_IN);
-
-	/* Setup USB Port 2 Output Control Register */
-	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
-
-	GPSR(SPITZ_GPIO_USB_HOST) = GPIO_bit(SPITZ_GPIO_USB_HOST);
+	int err;
 
-	UHCHR = (UHCHR) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
+	err = gpio_request(SPITZ_GPIO_USB_HOST, "USB_HOST");
+	if (err)
+		return err;
 
-	UHCRHDA |= UHCRHDA_NOCP;
+	/* Only Port 2 is connected
+	 * Setup USB Port 2 Output Control Register
+	 */
+	UP2OCR = UP2OCR_HXS | UP2OCR_HXOE | UP2OCR_DPPDE | UP2OCR_DMPDE;
 
-	return 0;
+	return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
 }
 
 static struct pxaohci_platform_data spitz_ohci_platform_data = {
 	.port_mode	= PMM_NPS_MODE,
 	.init		= spitz_ohci_init,
+	.flags		= ENABLE_PORT_ALL | NO_OC_PROTECTION,
 	.power_budget	= 150,
 };
 
@@ -444,27 +509,50 @@ static struct pxaohci_platform_data spitz_ohci_platform_data = {
 /*
  * Irda
  */
+static int spitz_irda_startup(struct device *dev)
+{
+	int rc;
+
+	rc = gpio_request(SPITZ_GPIO_IR_ON, "IrDA on");
+	if (rc)
+		goto err;
+
+	rc = gpio_direction_output(SPITZ_GPIO_IR_ON, 1);
+	if (rc)
+		goto err_dir;
+
+	return 0;
+
+err_dir:
+	gpio_free(SPITZ_GPIO_IR_ON);
+err:
+	return rc;
+}
+
+static void spitz_irda_shutdown(struct device *dev)
+{
+	gpio_free(SPITZ_GPIO_IR_ON);
+}
+
 static void spitz_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_IR_ON);
+	gpio_set_value(SPITZ_GPIO_IR_ON, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
 #ifdef CONFIG_MACH_AKITA
 static void akita_irda_transceiver_mode(struct device *dev, int mode)
 {
-	if (mode & IR_OFF)
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
-	else
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_IR_ON);
+	gpio_set_value(AKITA_GPIO_IR_ON, mode & IR_OFF);
+	pxa2xx_transceiver_mode(dev, mode);
 }
 #endif
 
 static struct pxaficp_platform_data spitz_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_OFF,
-	.transceiver_mode = spitz_irda_transceiver_mode,
+	.transceiver_cap	= IR_SIRMODE | IR_OFF,
+	.transceiver_mode	= spitz_irda_transceiver_mode,
+	.startup		= spitz_irda_startup,
+	.shutdown		= spitz_irda_shutdown,
 };
 
 
@@ -472,14 +560,6 @@ static struct pxaficp_platform_data spitz_ficp_platform_data = {
  * Spitz PXA Framebuffer
  */
 
-static void spitz_lcd_power(int on, struct fb_var_screeninfo *var)
-{
-	if (on)
-		corgi_lcdtg_hw_init(var->xres);
-	else
-		corgi_lcdtg_suspend();
-}
-
 static struct pxafb_mode_info spitz_pxafb_modes[] = {
 {
 	.pixclock       = 19231,
@@ -512,28 +592,19 @@ static struct pxafb_mach_info spitz_pxafb_info = {
 	.modes          = &spitz_pxafb_modes[0],
 	.num_modes      = 2,
 	.fixed_modes    = 1,
-	.lccr0          = LCCR0_Color | LCCR0_Sngl | LCCR0_Act | LCCR0_LDDALT | LCCR0_OUC | LCCR0_CMDIM | LCCR0_RDSTM,
-	.lccr3          = LCCR3_PixRsEdg | LCCR3_OutEnH,
-	.pxafb_lcd_power = spitz_lcd_power,
+	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_ALTERNATE_MAPPING,
 };
 
 
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
-	&spitzssp_device,
 	&spitzkbd_device,
-	&spitzts_device,
-	&spitzbl_device,
 	&spitzled_device,
 };
 
 static void spitz_poweroff(void)
 {
-	pxa_gpio_mode(SPITZ_GPIO_ON_RESET | GPIO_OUT);
-	GPSR(SPITZ_GPIO_ON_RESET) = GPIO_bit(SPITZ_GPIO_ON_RESET);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void spitz_restart(char mode)
@@ -547,61 +618,32 @@ static void spitz_restart(char mode)
 
 static void __init common_init(void)
 {
+	init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
 	pm_power_off = spitz_poweroff;
 	arm_pm_restart = spitz_restart;
 
 	PMCR = 0x00;
 
-	/* setup sleep mode values */
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
-
 	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
 	PCFR |= PCFR_OPDE;
 
-	corgi_ssp_set_machinfo(&spitz_ssp_machinfo);
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 
-	pxa_gpio_mode(SPITZ_GPIO_HSYNC | GPIO_IN);
+	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 	pxa_set_mci_info(&spitz_mci_platform_data);
 	pxa_set_ohci_info(&spitz_ohci_platform_data);
 	pxa_set_ficp_info(&spitz_ficp_platform_data);
-	set_pxa_fb_parent(&spitzssp_device.dev);
 	set_pxa_fb_info(&spitz_pxafb_info);
+	pxa_set_i2c_info(NULL);
 }
 
 #if defined(CONFIG_MACH_SPITZ) || defined(CONFIG_MACH_BORZOI)
-static void spitz_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via SCOOP */
-	if (intensity & 0x0020)
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-	else
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_CONT);
-
-	if (intensity)
-		set_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-	else
-		reset_scoop_gpio(&spitzscoop2_device.dev, SPITZ_SCP2_BACKLIGHT_ON);
-}
-
 static void __init spitz_init(void)
 {
 	platform_scoop_config = &spitz_pcmcia_config;
 
-	spitz_bl_machinfo.set_bl_intensity = spitz_bl_set_intensity;
-
 	common_init();
 
 	platform_device_register(&spitzscoop2_device);
@@ -612,32 +654,17 @@ static void __init spitz_init(void)
 /*
  * Akita IO Expander
  */
-struct platform_device akitaioexp_device = {
-	.name		= "akita-ioexp",
-	.id		= -1,
+static struct pca953x_platform_data akita_ioexp = {
+	.gpio_base		= AKITA_IOEXP_GPIO_BASE,
 };
 
-EXPORT_SYMBOL_GPL(akitaioexp_device);
-
-static void akita_bl_set_intensity(int intensity)
-{
-	if (intensity > 0x10)
-		intensity += 0x10;
-
-	/* Bits 0-4 are accessed via the SSP interface */
-	corgi_ssp_blduty_set(intensity & 0x1f);
-
-	/* Bit 5 is via IO-Expander */
-	if (intensity & 0x0020)
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-	else
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_CONT);
-
-	if (intensity)
-		akita_set_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-	else
-		akita_reset_ioexp(&akitaioexp_device.dev, AKITA_IOEXP_BACKLIGHT_ON);
-}
+static struct i2c_board_info akita_i2c_board_info[] = {
+	{
+		.type		= "max7310",
+		.addr		= 0x18,
+		.platform_data	= &akita_ioexp,
+	},
+};
 
 static void __init akita_init(void)
 {
@@ -646,11 +673,10 @@ static void __init akita_init(void)
 	/* We just pretend the second element of the array doesn't exist */
 	spitz_pcmcia_config.num_devs = 1;
 	platform_scoop_config = &spitz_pcmcia_config;
-	spitz_bl_machinfo.set_bl_intensity = akita_bl_set_intensity;
 
-	platform_device_register(&akitaioexp_device);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(akita_i2c_board_info));
 
-	spitzscoop_device.dev.parent = &akitaioexp_device.dev;
 	common_init();
 }
 #endif
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 23f050f..53018db 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -20,13 +20,13 @@
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/hardware/scoop.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/sharpsl.h>
-#include <asm/arch/spitz.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
+#include <mach/sharpsl.h>
+#include <mach/spitz.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/pxa2xx-gpio.h>
 #include "sharpsl.h"
 
 #define SHARPSL_CHARGE_ON_VOLT         0x99  /* 2.9V */
@@ -47,44 +47,35 @@ static void spitz_charger_init(void)
 
 static void spitz_measure_temp(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_ADC_TEMP_ON);
+	gpio_set_value(SPITZ_GPIO_ADC_TEMP_ON, on);
 }
 
 static void spitz_charge(int on)
 {
 	if (on) {
 		if (sharpsl_pm.flags & SHARPSL_SUSPENDED) {
-			set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+			gpio_set_value(SPITZ_GPIO_JK_B, 1);
+			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
 		} else {
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-			reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+			gpio_set_value(SPITZ_GPIO_JK_B, 0);
+			gpio_set_value(SPITZ_GPIO_CHRG_ON, 0);
 		}
 	} else {
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_B);
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_CHRG_ON);
+		gpio_set_value(SPITZ_GPIO_JK_B, 0);
+		gpio_set_value(SPITZ_GPIO_CHRG_ON, 1);
 	}
 }
 
 static void spitz_discharge(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_JK_A);
+	gpio_set_value(SPITZ_GPIO_JK_A, on);
 }
 
 /* HACK - For unknown reasons, accurate voltage readings are only made with a load
    on the power bus which the green led on spitz provides */
 static void spitz_discharge1(int on)
 {
-	if (on)
-		set_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
-	else
-		reset_scoop_gpio(&spitzscoop_device.dev, SPITZ_SCP_LED_GREEN);
+	gpio_set_value(SPITZ_GPIO_LED_GREEN, on);
 }
 
 static void spitz_presuspend(void)
@@ -207,7 +198,9 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.read_devdata     = spitzpm_read_devdata,
 	.charger_wakeup   = spitz_charger_wakeup,
 	.should_wakeup    = spitz_should_wakeup,
+#ifdef CONFIG_BACKLIGHT_CORGI
         .backlight_limit  = corgibl_limit_intensity,
+#endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
 	.charge_acin_high = SHARPSL_CHARGE_ON_ACIN_HIGH,
@@ -229,6 +222,10 @@ static int __devinit spitzpm_init(void)
 {
 	int ret;
 
+	if (!machine_is_spitz() && !machine_is_akita()
+			&& !machine_is_borzoi())
+		return -ENODEV;
+
 	spitzpm_device = platform_device_alloc("sharpsl-pm", -1);
 	if (!spitzpm_device)
 		return -ENOMEM;
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 0bb3198..2c31ec7 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -14,13 +14,6 @@
  *  IO-based SSP applications and allows easy port setup for DMA access.
  *
  *  Author: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
- *
- *  Revision history:
- *   22nd Aug 2003 Initial version.
- *   20th Dec 2004 Added ssp_config for changing port config without
- *                 closing the port.
- *    4th Aug 2005 Added option to disable irq handler registration and
- *                 cleaned up irq and clock detection.
  */
 
 #include <linux/module.h>
@@ -35,13 +28,13 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
 
-#include <asm/io.h>
 #include <asm/irq.h>
-#include <asm/hardware.h>
-#include <asm/arch/ssp.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/regs-ssp.h>
+#include <mach/hardware.h>
+#include <mach/ssp.h>
+#include <mach/pxa-regs.h>
+#include <mach/regs-ssp.h>
 
 #define TIMEOUT 100000
 
@@ -285,7 +278,7 @@ int ssp_init(struct ssp_dev *dev, u32 port, u32 init_flags)
 			goto out_region;
 		dev->irq = ssp->irq;
 	} else
-		dev->irq = 0;
+		dev->irq = NO_IRQ;
 
 	/* turn on SSP port clock */
 	clk_enable(ssp->clk);
@@ -306,7 +299,8 @@ void ssp_exit(struct ssp_dev *dev)
 	struct ssp_device *ssp = dev->ssp;
 
 	ssp_disable(dev);
-	free_irq(dev->irq, dev);
+	if (dev->irq != NO_IRQ)
+		free_irq(dev->irq, dev);
 	clk_disable(ssp->clk);
 	ssp_free(ssp);
 }
@@ -360,6 +354,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 		dev_err(&pdev->dev, "failed to allocate memory");
 		return -ENOMEM;
 	}
+	ssp->pdev = pdev;
 
 	ssp->clk = clk_get(&pdev->dev, "SSPCLK");
 	if (IS_ERR(ssp->clk)) {
diff --git a/arch/arm/mach-pxa/standby.S b/arch/arm/mach-pxa/standby.S
index 167412e..f3821cf 100644
--- a/arch/arm/mach-pxa/standby.S
+++ b/arch/arm/mach-pxa/standby.S
@@ -11,9 +11,10 @@
 
 #include <linux/linkage.h>
 #include <asm/assembler.h>
-#include <asm/hardware.h>
+#include <mach/hardware.h>
 
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
 
 		.text
 
@@ -35,20 +36,20 @@ ENTRY(pxa_cpu_standby)
 
 #ifdef CONFIG_PXA3xx
 
-#define MDCNFG		0x0000
-#define MDCNFG_DMCEN	(1 << 30)
-#define DDR_HCAL	0x0060
-#define DDR_HCAL_HCRNG	0x1f
-#define DDR_HCAL_HCPROG	(1 << 28)
-#define DDR_HCAL_HCEN	(1 << 31)
-#define DMCIER		0x0070
-#define DMCIER_EDLP	(1 << 29)
-#define DMCISR		0x0078
-#define RCOMP		0x0100
-#define RCOMP_SWEVAL	(1 << 31)
+#define PXA3_MDCNFG		0x0000
+#define PXA3_MDCNFG_DMCEN	(1 << 30)
+#define PXA3_DDR_HCAL		0x0060
+#define PXA3_DDR_HCAL_HCRNG	0x1f
+#define PXA3_DDR_HCAL_HCPROG	(1 << 28)
+#define PXA3_DDR_HCAL_HCEN	(1 << 31)
+#define PXA3_DMCIER		0x0070
+#define PXA3_DMCIER_EDLP	(1 << 29)
+#define PXA3_DMCISR		0x0078
+#define PXA3_RCOMP		0x0100
+#define PXA3_RCOMP_SWEVAL	(1 << 31)
 
 ENTRY(pm_enter_standby_start)
-	mov	r1, #0xf6000000		@ DMEMC_REG_BASE (MDCNFG)
+	mov	r1, #0xf6000000			@ DMEMC_REG_BASE (PXA3_MDCNFG)
 	add	r1, r1, #0x00100000
 
 	/*
@@ -59,54 +60,54 @@ ENTRY(pm_enter_standby_start)
 	 * This also means that only the dynamic memory controller
 	 * can be reliably accessed in the code following standby.
 	 */
-	ldr	r2, [r1]		@ Dummy read MDCNFG
+	ldr	r2, [r1]			@ Dummy read PXA3_MDCNFG
 
 	mcr	p14, 0, r0, c7, c0, 0
 	.rept	8
 	nop
 	.endr
 
-	ldr	r0, [r1, #DDR_HCAL]	@ Clear (and wait for) HCEN
-	bic	r0, r0, #DDR_HCAL_HCEN
-	str	r0, [r1, #DDR_HCAL]
-1:	ldr	r0, [r1, #DDR_HCAL]
-	tst	r0, #DDR_HCAL_HCEN
+	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ Clear (and wait for) HCEN
+	bic	r0, r0, #PXA3_DDR_HCAL_HCEN
+	str	r0, [r1, #PXA3_DDR_HCAL]
+1:	ldr	r0, [r1, #PXA3_DDR_HCAL]
+	tst	r0, #PXA3_DDR_HCAL_HCEN
 	bne	1b
 
-	ldr	r0, [r1, #RCOMP]	@ Initiate RCOMP
-	orr	r0, r0, #RCOMP_SWEVAL
-	str	r0, [r1, #RCOMP]
+	ldr	r0, [r1, #PXA3_RCOMP]		@ Initiate RCOMP
+	orr	r0, r0, #PXA3_RCOMP_SWEVAL
+	str	r0, [r1, #PXA3_RCOMP]
 
-	mov	r0, #~0			@ Clear interrupts
-	str	r0, [r1, #DMCISR]
+	mov	r0, #~0				@ Clear interrupts
+	str	r0, [r1, #PXA3_DMCISR]
 
-	ldr	r0, [r1, #DMCIER]	@ set DMIER[EDLP]
-	orr	r0, r0, #DMCIER_EDLP
-	str	r0, [r1, #DMCIER]
+	ldr	r0, [r1, #PXA3_DMCIER]		@ set DMIER[EDLP]
+	orr	r0, r0, #PXA3_DMCIER_EDLP
+	str	r0, [r1, #PXA3_DMCIER]
 
-	ldr	r0, [r1, #DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
-	bic	r0, r0, #DDR_HCAL_HCRNG
-	orr	r0, r0, #DDR_HCAL_HCEN | DDR_HCAL_HCPROG
-	str	r0, [r1, #DDR_HCAL]
+	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ clear HCRNG, set HCPROG, HCEN
+	bic	r0, r0, #PXA3_DDR_HCAL_HCRNG
+	orr	r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
+	str	r0, [r1, #PXA3_DDR_HCAL]
 
-1:	ldr	r0, [r1, #DMCISR]
-	tst	r0, #DMCIER_EDLP
+1:	ldr	r0, [r1, #PXA3_DMCISR]
+	tst	r0, #PXA3_DMCIER_EDLP
 	beq	1b
 
-	ldr	r0, [r1, #MDCNFG]	@ set MDCNFG[DMCEN]
-	orr	r0, r0, #MDCNFG_DMCEN
-	str	r0, [r1, #MDCNFG]
-1:	ldr	r0, [r1, #MDCNFG]
-	tst	r0, #MDCNFG_DMCEN
+	ldr	r0, [r1, #PXA3_MDCNFG]		@ set PXA3_MDCNFG[DMCEN]
+	orr	r0, r0, #PXA3_MDCNFG_DMCEN
+	str	r0, [r1, #PXA3_MDCNFG]
+1:	ldr	r0, [r1, #PXA3_MDCNFG]
+	tst	r0, #PXA3_MDCNFG_DMCEN
 	beq	1b
 
-	ldr	r0, [r1, #DDR_HCAL]	@ set DDR_HCAL[HCRNG]
+	ldr	r0, [r1, #PXA3_DDR_HCAL]	@ set PXA3_DDR_HCAL[HCRNG]
 	orr	r0, r0, #2 @ HCRNG
-	str	r0, [r1, #DDR_HCAL]
+	str	r0, [r1, #PXA3_DDR_HCAL]
 
-	ldr	r0, [r1, #DMCIER]	@ Clear the interrupt
+	ldr	r0, [r1, #PXA3_DMCIER]		@ Clear the interrupt
 	bic	r0, r0, #0x20000000
-	str	r0, [r1, #DMCIER]
+	str	r0, [r1, #PXA3_DMCIER]
 
 	mov	pc, lr
 ENTRY(pm_enter_standby_end)
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
new file mode 100644
index 0000000..589d32b
--- /dev/null
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -0,0 +1,84 @@
+/*
+ *  linux/arch/arm/mach-pxa/tavorevb.c
+ *
+ *  Support for the Marvell PXA930 Evaluation Board
+ *
+ *  Copyright (C) 2007-2008 Marvell International Ltd.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  publishhed by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/gpio.h>
+#include <linux/smc91x.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/hardware.h>
+#include <mach/pxa3xx-regs.h>
+#include <mach/mfp-pxa930.h>
+
+#include "devices.h"
+#include "generic.h"
+
+/* Tavor EVB MFP configurations */
+static mfp_cfg_t tavorevb_mfp_cfg[] __initdata = {
+	/* Ethernet */
+	DF_nCS1_nCS3,
+	GPIO47_GPIO,
+};
+
+#define TAVOREVB_ETH_PHYS	(0x14000000)
+
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.start	= (TAVOREVB_ETH_PHYS + 0x300),
+		.end	= (TAVOREVB_ETH_PHYS + 0xfffff),
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.end	= gpio_to_irq(mfp_to_gpio(MFP_PIN_GPIO47)),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	}
+};
+
+static struct smc91x_platdata tavorevb_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(smc91x_resources),
+	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &tavorevb_smc91x_info,
+	},
+};
+
+static void __init tavorevb_init(void)
+{
+	/* initialize MFP configurations */
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
+
+	platform_device_register(&smc91x_device);
+}
+
+MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)")
+	/* Maintainer: Eric Miao <eric.miao@marvell.com> */
+	.phys_io        = 0x40000000,
+	.boot_params    = 0xa0000100,
+	.io_pg_offst    = (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa3xx_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = tavorevb_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/time.c b/arch/arm/mach-pxa/time.c
index 7b7c0179..f8a9a62 100644
--- a/arch/arm/mach-pxa/time.c
+++ b/arch/arm/mach-pxa/time.c
@@ -17,12 +17,12 @@
 #include <linux/interrupt.h>
 #include <linux/clockchips.h>
 #include <linux/sched.h>
+#include <linux/cnt32_to_63.h>
 
 #include <asm/div64.h>
-#include <asm/cnt32_to_63.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/arch/pxa-regs.h>
+#include <mach/pxa-regs.h>
 #include <asm/mach-types.h>
 
 /*
@@ -155,7 +155,7 @@ static void __init pxa_timer_init(void)
 	OIER = 0;
 	OSSR = OSSR_M0 | OSSR_M1 | OSSR_M2 | OSSR_M3;
 
-	if (cpu_is_pxa21x() || cpu_is_pxa25x())
+	if (cpu_is_pxa25x())
 		clock_tick_rate = 3686400;
 	else if (machine_is_mainstone())
 		clock_tick_rate = 3249600;
diff --git a/arch/arm/mach-pxa/tosa-bt.c b/arch/arm/mach-pxa/tosa-bt.c
new file mode 100644
index 0000000..fb0294b
--- /dev/null
+++ b/arch/arm/mach-pxa/tosa-bt.c
@@ -0,0 +1,150 @@
+/*
+ * Bluetooth built-in chip control
+ *
+ * Copyright (c) 2008 Dmitry Baryshkov
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+#include <mach/tosa_bt.h>
+
+static void tosa_bt_on(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 0);
+	gpio_set_value(data->gpio_pwr, 1);
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(20);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static void tosa_bt_off(struct tosa_bt_data *data)
+{
+	gpio_set_value(data->gpio_reset, 1);
+	mdelay(10);
+	gpio_set_value(data->gpio_pwr, 0);
+	gpio_set_value(data->gpio_reset, 0);
+}
+
+static int tosa_bt_toggle_radio(void *data, enum rfkill_state state)
+{
+	pr_info("BT_RADIO going: %s\n",
+			state == RFKILL_STATE_ON ? "on" : "off");
+
+	if (state == RFKILL_STATE_ON) {
+		pr_info("TOSA_BT: going ON\n");
+		tosa_bt_on(data);
+	} else {
+		pr_info("TOSA_BT: going OFF\n");
+		tosa_bt_off(data);
+	}
+	return 0;
+}
+
+static int tosa_bt_probe(struct platform_device *dev)
+{
+	int rc;
+	struct rfkill *rfk;
+
+	struct tosa_bt_data *data = dev->dev.platform_data;
+
+	rc = gpio_request(data->gpio_reset, "Bluetooth reset");
+	if (rc)
+		goto err_reset;
+	rc = gpio_direction_output(data->gpio_reset, 0);
+	if (rc)
+		goto err_reset_dir;
+	rc = gpio_request(data->gpio_pwr, "Bluetooth power");
+	if (rc)
+		goto err_pwr;
+	rc = gpio_direction_output(data->gpio_pwr, 0);
+	if (rc)
+		goto err_pwr_dir;
+
+	rfk = rfkill_allocate(&dev->dev, RFKILL_TYPE_BLUETOOTH);
+	if (!rfk) {
+		rc = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfk->name = "tosa-bt";
+	rfk->toggle_radio = tosa_bt_toggle_radio;
+	rfk->data = data;
+#ifdef CONFIG_RFKILL_LEDS
+	rfk->led_trigger.name = "tosa-bt";
+#endif
+
+	rc = rfkill_register(rfk);
+	if (rc)
+		goto err_rfkill;
+
+	platform_set_drvdata(dev, rfk);
+
+	return 0;
+
+err_rfkill:
+	if (rfk)
+		rfkill_free(rfk);
+	rfk = NULL;
+err_rfk_alloc:
+	tosa_bt_off(data);
+err_pwr_dir:
+	gpio_free(data->gpio_pwr);
+err_pwr:
+err_reset_dir:
+	gpio_free(data->gpio_reset);
+err_reset:
+	return rc;
+}
+
+static int __devexit tosa_bt_remove(struct platform_device *dev)
+{
+	struct tosa_bt_data *data = dev->dev.platform_data;
+	struct rfkill *rfk = platform_get_drvdata(dev);
+
+	platform_set_drvdata(dev, NULL);
+
+	if (rfk)
+		rfkill_unregister(rfk);
+	rfk = NULL;
+
+	tosa_bt_off(data);
+
+	gpio_free(data->gpio_pwr);
+	gpio_free(data->gpio_reset);
+
+	return 0;
+}
+
+static struct platform_driver tosa_bt_driver = {
+	.probe = tosa_bt_probe,
+	.remove = __devexit_p(tosa_bt_remove),
+
+	.driver = {
+		.name = "tosa-bt",
+		.owner = THIS_MODULE,
+	},
+};
+
+
+static int __init tosa_bt_init(void)
+{
+	return platform_driver_register(&tosa_bt_driver);
+}
+
+static void __exit tosa_bt_exit(void)
+{
+	platform_driver_unregister(&tosa_bt_driver);
+}
+
+module_init(tosa_bt_init);
+module_exit(tosa_bt_exit);
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index ab4a9f5..130e37e 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -18,36 +18,39 @@
 #include <linux/major.h>
 #include <linux/fs.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
 #include <linux/mmc/host.h>
+#include <linux/mfd/tc6393xb.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
 #include <linux/pm.h>
-#include <linux/delay.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
+#include <linux/rfkill.h>
 
 #include <asm/setup.h>
-#include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-regs.h>
-#include <asm/arch/mfp-pxa25x.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/i2c.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/udc.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/reset.h>
+#include <mach/irda.h>
+#include <mach/i2c.h>
+#include <mach/mmc.h>
+#include <mach/udc.h>
+#include <mach/tosa_bt.h>
 
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-#include <asm/arch/tosa.h>
+#include <mach/tosa.h>
 
 #include <asm/hardware/scoop.h>
 #include <asm/mach/sharpsl_param.h>
 
 #include "generic.h"
+#include "clock.h"
 #include "devices.h"
 
 static unsigned long tosa_pin_config[] = {
@@ -86,7 +89,7 @@ static unsigned long tosa_pin_config[] = {
 	GPIO6_MMC_CLK,
 	GPIO8_MMC_CS0,
 	GPIO9_GPIO, /* Detect */
-	// GPIO10 nSD_INT
+	GPIO10_GPIO, /* nSD_INT */
 
 	/* CF */
 	GPIO13_GPIO, /* CD_IRQ */
@@ -124,34 +127,34 @@ static unsigned long tosa_pin_config[] = {
 	GPIO44_BTUART_CTS,
 	GPIO45_BTUART_RTS,
 
-	/* IrDA */
-	GPIO46_STUART_RXD,
-	GPIO47_STUART_TXD,
-
 	/* Keybd */
-	GPIO58_GPIO,
-	GPIO59_GPIO,
-	GPIO60_GPIO,
-	GPIO61_GPIO,
-	GPIO62_GPIO,
-	GPIO63_GPIO,
-	GPIO64_GPIO,
-	GPIO65_GPIO,
-	GPIO66_GPIO,
-	GPIO67_GPIO,
-	GPIO68_GPIO,
-	GPIO69_GPIO,
-	GPIO70_GPIO,
-	GPIO71_GPIO,
-	GPIO72_GPIO,
-	GPIO73_GPIO,
-	GPIO74_GPIO,
-	GPIO75_GPIO,
+	GPIO58_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO59_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO60_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO61_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO62_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO63_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO64_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO65_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO66_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO67_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO68_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO69_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO70_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO71_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO72_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO73_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO74_GPIO | MFP_LPM_DRIVE_LOW,
+	GPIO75_GPIO | MFP_LPM_DRIVE_LOW,
 
 	/* SPI */
 	GPIO81_SSP2_CLK_OUT,
 	GPIO82_SSP2_FRM_OUT,
 	GPIO83_SSP2_TXD,
+
+	/* IrDA is managed in other way */
+	GPIO46_GPIO,
+	GPIO47_GPIO,
 };
 
 /*
@@ -249,6 +252,15 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 
 	tosa_mci_platform_data.detect_delay = msecs_to_jiffies(250);
 
+	err = gpio_request(TOSA_GPIO_nSD_DETECT, "MMC/SD card detect");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request nSD_DETECT gpio\n");
+		goto err_gpio_detect;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_DETECT);
+	if (err)
+		goto err_gpio_detect_dir;
+
 	err = request_irq(TOSA_IRQ_GPIO_nSD_DETECT, tosa_detect_int,
 			  IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
 				"MMC/SD card detect", data);
@@ -257,7 +269,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 		goto err_irq;
 	}
 
-	err = gpio_request(TOSA_GPIO_SD_WP, "sd_wp");
+	err = gpio_request(TOSA_GPIO_SD_WP, "SD Write Protect");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_WP gpio\n");
 		goto err_gpio_wp;
@@ -266,7 +278,7 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_wp_dir;
 
-	err = gpio_request(TOSA_GPIO_PWR_ON, "sd_pwr");
+	err = gpio_request(TOSA_GPIO_PWR_ON, "SD Power");
 	if (err) {
 		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
 		goto err_gpio_pwr;
@@ -275,8 +287,20 @@ static int tosa_mci_init(struct device *dev, irq_handler_t tosa_detect_int, void
 	if (err)
 		goto err_gpio_pwr_dir;
 
+	err = gpio_request(TOSA_GPIO_nSD_INT, "SD Int");
+	if (err) {
+		printk(KERN_ERR "tosa_mci_init: can't request SD_PWR gpio\n");
+		goto err_gpio_int;
+	}
+	err = gpio_direction_input(TOSA_GPIO_nSD_INT);
+	if (err)
+		goto err_gpio_int_dir;
+
 	return 0;
 
+err_gpio_int_dir:
+	gpio_free(TOSA_GPIO_nSD_INT);
+err_gpio_int:
 err_gpio_pwr_dir:
 	gpio_free(TOSA_GPIO_PWR_ON);
 err_gpio_pwr:
@@ -285,6 +309,9 @@ err_gpio_wp_dir:
 err_gpio_wp:
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
 err_irq:
+err_gpio_detect_dir:
+	gpio_free(TOSA_GPIO_nSD_DETECT);
+err_gpio_detect:
 	return err;
 }
 
@@ -306,9 +333,11 @@ static int tosa_mci_get_ro(struct device *dev)
 
 static void tosa_mci_exit(struct device *dev, void *data)
 {
+	gpio_free(TOSA_GPIO_nSD_INT);
 	gpio_free(TOSA_GPIO_PWR_ON);
 	gpio_free(TOSA_GPIO_SD_WP);
 	free_irq(TOSA_IRQ_GPIO_nSD_DETECT, data);
+	gpio_free(TOSA_GPIO_nSD_DETECT);
 }
 
 static struct pxamci_platform_data tosa_mci_platform_data = {
@@ -322,29 +351,55 @@ static struct pxamci_platform_data tosa_mci_platform_data = {
 /*
  * Irda
  */
+static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+{
+	if (mode & IR_OFF) {
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 0);
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	} else {
+		pxa2xx_transceiver_mode(dev, mode);
+		gpio_set_value(TOSA_GPIO_IR_POWERDWN, 1);
+	}
+}
+
 static int tosa_irda_startup(struct device *dev)
 {
 	int ret;
 
+	ret = gpio_request(TOSA_GPIO_IRDA_TX, "IrDA TX");
+	if (ret)
+		goto err_tx;
+	ret = gpio_direction_output(TOSA_GPIO_IRDA_TX, 0);
+	if (ret)
+		goto err_tx_dir;
+
 	ret = gpio_request(TOSA_GPIO_IR_POWERDWN, "IrDA powerdown");
 	if (ret)
-		return ret;
+		goto err_pwr;
 
 	ret = gpio_direction_output(TOSA_GPIO_IR_POWERDWN, 0);
 	if (ret)
-		gpio_free(TOSA_GPIO_IR_POWERDWN);
+		goto err_pwr_dir;
 
-	return ret;
-	}
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
 
-static void tosa_irda_shutdown(struct device *dev)
-{
+	return 0;
+
+err_pwr_dir:
 	gpio_free(TOSA_GPIO_IR_POWERDWN);
+err_pwr:
+err_tx_dir:
+	gpio_free(TOSA_GPIO_IRDA_TX);
+err_tx:
+	return ret;
 }
 
-static void tosa_irda_transceiver_mode(struct device *dev, int mode)
+static void tosa_irda_shutdown(struct device *dev)
 {
-	gpio_set_value(TOSA_GPIO_IR_POWERDWN, !(mode & IR_OFF));
+	tosa_irda_transceiver_mode(dev, IR_SIRMODE | IR_OFF);
+	gpio_free(TOSA_GPIO_IR_POWERDWN);
+	gpio_free(TOSA_GPIO_IRDA_TX);
 }
 
 static struct pxaficp_platform_data tosa_ficp_platform_data = {
@@ -355,6 +410,70 @@ static struct pxaficp_platform_data tosa_ficp_platform_data = {
 };
 
 /*
+ * Tosa AC IN
+ */
+static int tosa_power_init(struct device *dev)
+{
+	int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(TOSA_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(TOSA_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void tosa_power_exit(struct device *dev)
+{
+	gpio_free(TOSA_GPIO_AC_IN);
+}
+
+static int tosa_power_ac_online(void)
+{
+	return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
+}
+
+static char *tosa_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+	"jacket-battery",
+};
+
+static struct pda_power_pdata tosa_power_data = {
+	.init			= tosa_power_init,
+	.is_ac_online		= tosa_power_ac_online,
+	.exit			= tosa_power_exit,
+	.supplied_to		= tosa_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(tosa_ac_supplied_to),
+};
+
+static struct resource tosa_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.end		= gpio_to_irq(TOSA_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device tosa_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &tosa_power_data,
+	.resource		= tosa_power_resource,
+	.num_resources		= ARRAY_SIZE(tosa_power_resource),
+};
+
+/*
  * Tosa Keyboard
  */
 static struct platform_device tosakbd_device = {
@@ -403,6 +522,14 @@ static struct gpio_keys_button tosa_gpio_keys[] = {
 		.wakeup	= 1,
 		.active_low = 1,
 	},
+	{
+		.type	= EV_SW,
+		.code	= SW_HEADPHONE_INSERT,
+		.gpio	= TOSA_GPIO_EAR_IN,
+		.desc	= "HeadPhone insert",
+		.active_low = 1,
+		.debounce_interval = 300,
+	},
 };
 
 static struct gpio_keys_platform_data tosa_gpio_keys_platform_data = {
@@ -439,7 +566,7 @@ static struct gpio_led tosa_gpio_leds[] = {
 	},
 	{
 		.name			= "tosa:blue:bluetooth",
-		.default_trigger	= "none",
+		.default_trigger	= "tosa-bt",
 		.gpio			= TOSA_GPIO_BT_LED,
 	},
 };
@@ -457,21 +584,184 @@ static struct platform_device tosaled_device = {
 	},
 };
 
+/*
+ * Toshiba Mobile IO Controller
+ */
+static struct resource tc6393xb_resources[] = {
+	[0] = {
+		.start	= TOSA_LCDC_PHYS,
+		.end	= TOSA_LCDC_PHYS + 0x3ffffff,
+		.flags	= IORESOURCE_MEM,
+	},
+
+	[1] = {
+		.start	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.end	= TOSA_IRQ_GPIO_TC6393XB_INT,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+
+static int tosa_tc6393xb_enable(struct platform_device *dev)
+{
+	int rc;
+
+	rc = gpio_request(TOSA_GPIO_TC6393XB_REST_IN, "tc6393xb #pclr");
+	if (rc)
+		goto err_req_pclr;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_SUSPEND, "tc6393xb #suspend");
+	if (rc)
+		goto err_req_suspend;
+	rc = gpio_request(TOSA_GPIO_TC6393XB_L3V_ON, "l3v");
+	if (rc)
+		goto err_req_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	if (rc)
+		goto err_dir_l3v;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	if (rc)
+		goto err_dir_suspend;
+	rc = gpio_direction_output(TOSA_GPIO_TC6393XB_REST_IN, 0);
+	if (rc)
+		goto err_dir_pclr;
+
+	mdelay(1);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+
+	mdelay(10);
+
+	gpio_set_value(TOSA_GPIO_TC6393XB_REST_IN, 1);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+
+	return 0;
+err_dir_pclr:
+err_dir_suspend:
+err_dir_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+err_req_l3v:
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+err_req_suspend:
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+err_req_pclr:
+	return rc;
+}
+
+static int tosa_tc6393xb_disable(struct platform_device *dev)
+{
+	gpio_free(TOSA_GPIO_TC6393XB_L3V_ON);
+	gpio_free(TOSA_GPIO_TC6393XB_SUSPEND);
+	gpio_free(TOSA_GPIO_TC6393XB_REST_IN);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_resume(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 1);
+	mdelay(10);
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 1);
+	mdelay(10);
+
+	return 0;
+}
+
+static int tosa_tc6393xb_suspend(struct platform_device *dev)
+{
+	gpio_set_value(TOSA_GPIO_TC6393XB_L3V_ON, 0);
+	gpio_set_value(TOSA_GPIO_TC6393XB_SUSPEND, 0);
+	return 0;
+}
+
+static struct mtd_partition tosa_nand_partition[] = {
+	{
+		.name	= "smf",
+		.offset	= 0,
+		.size	= 7 * 1024 * 1024,
+	},
+	{
+		.name	= "root",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= 28 * 1024 * 1024,
+	},
+	{
+		.name	= "home",
+		.offset	= MTDPART_OFS_APPEND,
+		.size	= MTDPART_SIZ_FULL,
+	},
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr tosa_tc6393xb_nand_bbt = {
+	.options	= 0,
+	.offs		= 4,
+	.len		= 2,
+	.pattern	= scan_ff_pattern
+};
+
+static struct tmio_nand_data tosa_tc6393xb_nand_config = {
+	.num_partitions	= ARRAY_SIZE(tosa_nand_partition),
+	.partition	= tosa_nand_partition,
+	.badblock_pattern = &tosa_tc6393xb_nand_bbt,
+};
+
+static struct tc6393xb_platform_data tosa_tc6393xb_setup = {
+	.scr_pll2cr	= 0x0cc1,
+	.scr_gper	= 0x3300,
+	.scr_gpo_dsr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+	.scr_gpo_doecr	=
+		TOSA_TC6393XB_GPIO_BIT(TOSA_GPIO_CARD_VCC_ON),
+
+	.irq_base	= IRQ_BOARD_START,
+	.gpio_base	= TOSA_TC6393XB_GPIO_BASE,
+
+	.enable		= tosa_tc6393xb_enable,
+	.disable	= tosa_tc6393xb_disable,
+	.suspend	= tosa_tc6393xb_suspend,
+	.resume		= tosa_tc6393xb_resume,
+
+	.nand_data	= &tosa_tc6393xb_nand_config,
+};
+
+
+static struct platform_device tc6393xb_device = {
+	.name	= "tc6393xb",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &tosa_tc6393xb_setup,
+	},
+	.num_resources	= ARRAY_SIZE(tc6393xb_resources),
+	.resource	= tc6393xb_resources,
+};
+
+static struct tosa_bt_data tosa_bt_data = {
+	.gpio_pwr	= TOSA_GPIO_BT_PWR_EN,
+	.gpio_reset	= TOSA_GPIO_BT_RESET,
+};
+
+static struct platform_device tosa_bt_device = {
+	.name	= "tosa-bt",
+	.id	= -1,
+	.dev.platform_data = &tosa_bt_data,
+};
+
+
 static struct platform_device *devices[] __initdata = {
 	&tosascoop_device,
 	&tosascoop_jc_device,
+	&tc6393xb_device,
+	&tosa_power_device,
 	&tosakbd_device,
 	&tosa_gpio_keys_device,
 	&tosaled_device,
+	&tosa_bt_device,
 };
 
 static void tosa_poweroff(void)
 {
-	gpio_direction_output(TOSA_GPIO_ON_RESET, 0);
-	gpio_set_value(TOSA_GPIO_ON_RESET, 1);
-
-	mdelay(1000);
-	arm_machine_restart('h');
+	arm_machine_restart('g');
 }
 
 static void tosa_restart(char mode)
@@ -485,10 +775,14 @@ static void tosa_restart(char mode)
 
 static void __init tosa_init(void)
 {
+	int dummy;
+
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
+	init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+
 	pm_power_off = tosa_poweroff;
 	arm_pm_restart = tosa_restart;
 
@@ -497,12 +791,18 @@ static void __init tosa_init(void)
 	/* enable batt_fault */
 	PMCR = 0x01;
 
+	dummy = gpiochip_reserve(TOSA_SCOOP_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_SCOOP_JC_GPIO_BASE, 12);
+	dummy = gpiochip_reserve(TOSA_TC6393XB_GPIO_BASE, 16);
+
 	pxa_set_mci_info(&tosa_mci_platform_data);
 	pxa_set_udc_info(&udc_info);
 	pxa_set_ficp_info(&tosa_ficp_platform_data);
 	pxa_set_i2c_info(NULL);
 	platform_scoop_config = &tosa_pcmcia_config;
 
+	clk_add_alias("CLK_CK3P6MI", &tc6393xb_device.dev, "GPIO11_CLK", NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 931885d..a13dbf3 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -22,8 +22,8 @@
 #include <linux/fb.h>
 #include <linux/ioport.h>
 #include <linux/delay.h>
-#include <linux/serial_8250.h>
-#include <linux/mtd/mtd.h>
+#include <linux/gpio.h>
+#include <linux/dm9000.h>
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 
@@ -31,7 +31,6 @@
 #include <asm/setup.h>
 #include <asm/memory.h>
 #include <asm/mach-types.h>
-#include <asm/hardware.h>
 #include <asm/irq.h>
 #include <asm/sizes.h>
 
@@ -40,40 +39,148 @@
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
 
-#include <asm/arch/pxa-regs.h>
-#include <asm/arch/pxa2xx-gpio.h>
-#include <asm/arch/trizeps4.h>
-#include <asm/arch/audio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/irda.h>
-#include <asm/arch/ohci.h>
+#include <mach/hardware.h>
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/trizeps4.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mmc.h>
+#include <mach/irda.h>
+#include <mach/ohci.h>
+#include <mach/i2c.h>
 
 #include "generic.h"
 #include "devices.h"
 
-/********************************************************************************************
+/*	comment out the following line if you want to use the
+ *	Standard UART from PXA for serial / irda transmission
+ *	and acivate it if you have status leds connected */
+#define STATUS_LEDS_ON_STUART_PINS 1
+
+/*****************************************************************************
+ * MultiFunctionPins of CPU
+ *****************************************************************************/
+static unsigned long trizeps4_pin_config[] __initdata = {
+	/* Chip Selects */
+	GPIO15_nCS_1,		/* DiskOnChip CS */
+	GPIO93_GPIO,		/* TRIZEPS4_DOC_IRQ */
+	GPIO94_GPIO,		/* DOC lock */
+
+	GPIO78_nCS_2,		/* DM9000 CS */
+	GPIO101_GPIO,		/* TRIZEPS4_ETH_IRQ */
+
+	GPIO79_nCS_3,		/* Logic CS */
+	GPIO0_GPIO | WAKEUP_ON_EDGE_RISE,	/* Logic irq */
+
+	/* LCD - 16bpp Active TFT */
+	GPIO58_LCD_LDD_0,
+	GPIO59_LCD_LDD_1,
+	GPIO60_LCD_LDD_2,
+	GPIO61_LCD_LDD_3,
+	GPIO62_LCD_LDD_4,
+	GPIO63_LCD_LDD_5,
+	GPIO64_LCD_LDD_6,
+	GPIO65_LCD_LDD_7,
+	GPIO66_LCD_LDD_8,
+	GPIO67_LCD_LDD_9,
+	GPIO68_LCD_LDD_10,
+	GPIO69_LCD_LDD_11,
+	GPIO70_LCD_LDD_12,
+	GPIO71_LCD_LDD_13,
+	GPIO72_LCD_LDD_14,
+	GPIO73_LCD_LDD_15,
+	GPIO74_LCD_FCLK,
+	GPIO75_LCD_LCLK,
+	GPIO76_LCD_PCLK,
+	GPIO77_LCD_BIAS,
+
+	/* UART */
+	GPIO9_FFUART_CTS,
+	GPIO10_FFUART_DCD,
+	GPIO16_FFUART_TXD,
+	GPIO33_FFUART_DSR,
+	GPIO38_FFUART_RI,
+	GPIO82_FFUART_DTR,
+	GPIO83_FFUART_RTS,
+	GPIO96_FFUART_RXD,
+
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+#ifdef STATUS_LEDS_ON_STUART_PINS
+	GPIO46_GPIO,
+	GPIO47_GPIO,
+#else
+	GPIO46_STUART_RXD,
+	GPIO47_STUART_TXD,
+#endif
+	/* PCMCIA */
+	GPIO11_GPIO,			/* TRIZEPS4_CD_IRQ */
+	GPIO13_GPIO,			/* TRIZEPS4_READY_NINT */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO54_nPCE_2,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO102_nPCE_1,
+	GPIO104_PSKTSEL,
+
+	/* MultiMediaCard */
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+	GPIO12_GPIO,			/* TRIZEPS4_MMC_IRQ */
+
+	/* USB OHCI */
+	GPIO88_USBH1_PWR,		/* USBHPWR1 */
+	GPIO89_USBH1_PEN,		/* USBHPEN1 */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+};
+
+static unsigned long trizeps4wl_pin_config[] __initdata = {
+	/* SSP 2 */
+	GPIO14_SSP2_SFRM,
+	GPIO19_SSP2_SCLK,
+	GPIO53_GPIO,			/* TRIZEPS4_SPI_IRQ */
+	GPIO86_SSP2_RXD,
+	GPIO87_SSP2_TXD,
+};
+
+/****************************************************************************
  * ONBOARD FLASH
- ********************************************************************************************/
+ ****************************************************************************/
 static struct mtd_partition trizeps4_partitions[] = {
 	{
 		.name =		"Bootloader",
 		.offset =	0x00000000,
 		.size =		0x00040000,
 		.mask_flags =	MTD_WRITEABLE  /* force read-only */
-	},{
+	}, {
 		.name =		"Backup",
 		.offset =	0x00040000,
 		.size =		0x00040000,
-	},{
+	}, {
 		.name =		"Image",
 		.offset =	0x00080000,
 		.size =		0x01080000,
-	},{
+	}, {
 		.name =		"IPSM",
 		.offset =	0x01100000,
 		.size =		0x00e00000,
-	},{
+	}, {
 		.name =		"Registry",
 		.offset =	0x01f00000,
 		.size =		MTDPART_SIZ_FULL,
@@ -104,9 +211,9 @@ static struct platform_device flash_device = {
 	.num_resources = 1,
 };
 
-/********************************************************************************************
+/****************************************************************************
  * DAVICOM DM9000 Ethernet
- ********************************************************************************************/
+ ****************************************************************************/
 static struct resource dm9000_resources[] = {
 	[0] = {
 		.start	= TRIZEPS4_ETH_PHYS+0x300,
@@ -121,76 +228,68 @@ static struct resource dm9000_resources[] = {
 	[2] = {
 		.start	= TRIZEPS4_ETH_IRQ,
 		.end	= TRIZEPS4_ETH_IRQ,
-		.flags	= (IORESOURCE_IRQ | IRQT_RISING),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
 };
 
+static struct dm9000_plat_data tri_dm9000_platdata = {
+	.flags		= DM9000_PLATF_32BITONLY,
+};
+
 static struct platform_device dm9000_device = {
 	.name		= "dm9000",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(dm9000_resources),
 	.resource	= dm9000_resources,
+	.dev		= {
+		.platform_data = &tri_dm9000_platdata,
+	}
 };
 
-/********************************************************************************************
- * PXA270 serial ports
- ********************************************************************************************/
-static struct plat_serial8250_port tri_serial_ports[] = {
-#ifdef CONFIG_SERIAL_PXA
-	/* this uses the own PXA driver */
+/****************************************************************************
+ * LED's on GPIO pins of PXA
+ ****************************************************************************/
+static struct gpio_led trizeps4_led[] = {
+#ifdef STATUS_LEDS_ON_STUART_PINS
 	{
-		0,
-	},
-#else
-	/* this uses the generic 8520 driver */
-	[0] = {
-		.membase	= (void *)&FFUART,
-		.irq		= IRQ_FFUART,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= (921600*16),
-	},
-	[1] = {
-		.membase	= (void *)&BTUART,
-		.irq		= IRQ_BTUART,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM32,
-		.regshift	= 2,
-		.uartclk	= (921600*16),
+		.name = "led0:orange:heartbeat",	/* */
+		.default_trigger = "heartbeat",
+		.gpio = GPIO_HEARTBEAT_LED,
+		.active_low = 1,
 	},
 	{
-		0,
+		.name = "led1:yellow:cpubusy",		/* */
+		.default_trigger = "cpu-busy",
+		.gpio = GPIO_SYS_BUSY_LED,
+		.active_low = 1,
 	},
 #endif
 };
 
-static struct platform_device uart_devices = {
-	.name		= "serial8250",
-	.id		= 0,
-	.dev		= {
-		.platform_data	= tri_serial_ports,
-	},
-	.num_resources	= 0,
-	.resource	= NULL,
+static struct gpio_led_platform_data trizeps4_led_data = {
+	.leds		= trizeps4_led,
+	.num_leds	= ARRAY_SIZE(trizeps4_led),
 };
 
-/********************************************************************************************
- * PXA270 ac97 sound codec
- ********************************************************************************************/
-static struct platform_device ac97_audio_device = {
-	.name		= "pxa2xx-ac97",
+static struct platform_device leds_devices = {
+	.name		= "leds-gpio",
 	.id		= -1,
+	.dev		= {
+		.platform_data	= &trizeps4_led_data,
+	},
 };
 
-static struct platform_device * trizeps4_devices[] __initdata = {
+static struct platform_device *trizeps4_devices[] __initdata = {
 	&flash_device,
-	&uart_devices,
 	&dm9000_device,
-	&ac97_audio_device,
+	&leds_devices,
+};
+
+static struct platform_device *trizeps4wl_devices[] __initdata = {
+	&flash_device,
+	&leds_devices,
 };
 
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 static short trizeps_conxs_bcr;
 
 /* PCCARD power switching supports only 3,3V */
@@ -200,107 +299,63 @@ void board_pcmcia_power(int power)
 		/* switch power on, put in reset and enable buffers */
 		trizeps_conxs_bcr |= power;
 		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_BUF_EN);
-		ConXS_BCR = trizeps_conxs_bcr;
+		trizeps_conxs_bcr &= ~ConXS_BCR_CF_BUF_EN;
+		BCR_writew(trizeps_conxs_bcr);
 		/* wait a little */
 		udelay(2000);
 		/* take reset away */
-		trizeps_conxs_bcr &= ~(ConXS_BCR_CF_RESET);
-		ConXS_BCR = trizeps_conxs_bcr;
+		trizeps_conxs_bcr &= ~ConXS_BCR_CF_RESET;
+		BCR_writew(trizeps_conxs_bcr);
 		udelay(2000);
 	} else {
 		/* put in reset */
 		trizeps_conxs_bcr |= ConXS_BCR_CF_RESET;
-		ConXS_BCR = trizeps_conxs_bcr;
+		BCR_writew(trizeps_conxs_bcr);
 		udelay(1000);
 		/* switch power off */
-		trizeps_conxs_bcr &= ~(0xf);
-		ConXS_BCR = trizeps_conxs_bcr;
-
+		trizeps_conxs_bcr &= ~0xf;
+		BCR_writew(trizeps_conxs_bcr);
 	}
-	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n": "ff", trizeps_conxs_bcr);
+	pr_debug("%s: o%s 0x%x\n", __func__, power ? "n" : "ff",
+			trizeps_conxs_bcr);
 }
+EXPORT_SYMBOL(board_pcmcia_power);
 
 /* backlight power switching for LCD panel */
 static void board_backlight_power(int on)
 {
-	if (on) {
+	if (on)
 		trizeps_conxs_bcr |= ConXS_BCR_L_DISP;
-	} else {
+	else
 		trizeps_conxs_bcr &= ~ConXS_BCR_L_DISP;
-	}
-	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff", trizeps_conxs_bcr);
-	ConXS_BCR = trizeps_conxs_bcr;
-}
 
-/* Powersupply for MMC/SD cardslot */
-static void board_mci_power(struct device *dev, unsigned int vdd)
-{
-	struct pxamci_platform_data* p_d = dev->platform_data;
-
-	if (( 1 << vdd) & p_d->ocr_mask) {
-		pr_debug("%s: on\n", __func__);
-		/* FIXME fill in values here */
-	} else {
-		pr_debug("%s: off\n", __func__);
-		/* FIXME fill in values here */
-	}
+	pr_debug("%s: o%s 0x%x\n", __func__, on ? "n" : "ff",
+			trizeps_conxs_bcr);
+	BCR_writew(trizeps_conxs_bcr);
 }
 
-static short trizeps_conxs_ircr;
-
-/* Switch modes and Power for IRDA receiver */
-static void board_irda_mode(struct device *dev, int mode)
-{
-	unsigned long flags;
-
-	local_irq_save(flags);
-	if (mode & IR_SIRMODE) {
-		/* Slow mode */
-		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;
-	} else if (mode & IR_FIRMODE) {
-		/* Fast mode */
-		trizeps_conxs_ircr |= ConXS_IRCR_MODE;
-	}
-	if (mode & IR_OFF) {
-		trizeps_conxs_ircr |= ConXS_IRCR_SD;
-	} else {
-		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
-	}
-	/* FIXME write values to register */
-	local_irq_restore(flags);
-}
-
-#else
-/* for other baseboards define dummies */
-void board_pcmcia_power(int power)	{;}
-#define board_backlight_power		NULL
-#define board_mci_power			NULL
-#define board_irda_mode			NULL
-
-#endif		/* CONFIG_MACH_TRIZEPS4_CONXS */
-EXPORT_SYMBOL(board_pcmcia_power);
+/* a I2C based RTC is known on CONXS board */
+static struct i2c_board_info trizeps4_i2c_devices[] __initdata = {
+	{ I2C_BOARD_INFO("rtc-pcf8593", 0x51) }
+};
 
-static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int, void *data)
+/****************************************************************************
+ * MMC card slot external to module
+ ****************************************************************************/
+static int trizeps4_mci_init(struct device *dev, irq_handler_t mci_detect_int,
+		void *data)
 {
 	int err;
-	/* setup GPIO for PXA27x MMC controller */
-	pxa_gpio_mode(GPIO32_MMCCLK_MD);
-	pxa_gpio_mode(GPIO112_MMCCMD_MD);
-	pxa_gpio_mode(GPIO92_MMCDAT0_MD);
-	pxa_gpio_mode(GPIO109_MMCDAT1_MD);
-	pxa_gpio_mode(GPIO110_MMCDAT2_MD);
-	pxa_gpio_mode(GPIO111_MMCDAT3_MD);
-
-	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
 
 	err = request_irq(TRIZEPS4_MMC_IRQ, mci_detect_int,
-			  IRQF_DISABLED | IRQF_TRIGGER_RISING,
-			  "MMC card detect", data);
-	if (err)
-		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
-
-	return err;
+		IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_SAMPLE_RANDOM,
+		"MMC card detect", data);
+	if (err) {
+		printk(KERN_ERR "trizeps4_mci_init: MMC/SD: can't request"
+						"MMC card detect IRQ\n");
+		return -1;
+	}
+	return 0;
 }
 
 static void trizeps4_mci_exit(struct device *dev, void *data)
@@ -310,39 +365,69 @@ static void trizeps4_mci_exit(struct device *dev, void *data)
 
 static struct pxamci_platform_data trizeps4_mci_platform_data = {
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay	= 1,
 	.init 		= trizeps4_mci_init,
 	.exit		= trizeps4_mci_exit,
-	.setpower 	= board_mci_power,
+	.get_ro		= NULL,	/* write-protection not supported */
+	.setpower 	= NULL,	/* power-switching not supported */
 };
 
-static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
-	.transceiver_cap  = IR_SIRMODE | IR_FIRMODE | IR_OFF,
-	.transceiver_mode = board_irda_mode,
-};
+/****************************************************************************
+ * IRDA mode switching on stuart
+ ****************************************************************************/
+#ifndef STATUS_LEDS_ON_STUART_PINS
+static short trizeps_conxs_ircr;
 
-static int trizeps4_ohci_init(struct device *dev)
+static int trizeps4_irda_startup(struct device *dev)
 {
-	/* setup Port1 GPIO pin. */
-	pxa_gpio_mode( 88 | GPIO_ALT_FN_1_IN);	/* USBHPWR1 */
-	pxa_gpio_mode( 89 | GPIO_ALT_FN_2_OUT);	/* USBHPEN1 */
-
-	/* Set the Power Control Polarity Low and Power Sense
-	   Polarity Low to active low. */
-	UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
-		~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
-
+	trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+	IRCR_writew(trizeps_conxs_ircr);
 	return 0;
 }
 
-static void trizeps4_ohci_exit(struct device *dev)
+static void trizeps4_irda_shutdown(struct device *dev)
+{
+	trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	IRCR_writew(trizeps_conxs_ircr);
+}
+
+static void trizeps4_irda_transceiver_mode(struct device *dev, int mode)
 {
-	;
+	unsigned long flags;
+
+	local_irq_save(flags);
+	/* Switch mode */
+	if (mode & IR_SIRMODE)
+		trizeps_conxs_ircr &= ~ConXS_IRCR_MODE;	/* Slow mode */
+	else if (mode & IR_FIRMODE) {
+		trizeps_conxs_ircr |= ConXS_IRCR_MODE;	/* Fast mode */
+
+	/* Switch power */
+	if (mode & IR_OFF)
+		trizeps_conxs_ircr |= ConXS_IRCR_SD;
+	else
+		trizeps_conxs_ircr &= ~ConXS_IRCR_SD;
+
+	IRCR_writew(trizeps_conxs_ircr);
+	local_irq_restore(flags);
+
+	pxa2xx_transceiver_mode(dev, mode);
 }
 
+static struct pxaficp_platform_data trizeps4_ficp_platform_data = {
+	.transceiver_cap	= IR_SIRMODE | IR_FIRMODE | IR_OFF,
+	.transceiver_mode	= trizeps4_irda_transceiver_mode,
+	.startup		= trizeps4_irda_startup,
+	.shutdown		= trizeps4_irda_shutdown,
+};
+#endif
+
+/****************************************************************************
+ * OHCI USB port
+ ****************************************************************************/
 static struct pxaohci_platform_data trizeps4_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.init		= trizeps4_ohci_init,
-	.exit		= trizeps4_ohci_exit,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
 };
 
 static struct map_desc trizeps4_io_desc[] __initdata = {
@@ -379,104 +464,80 @@ static struct map_desc trizeps4_io_desc[] __initdata = {
 };
 
 static struct pxafb_mode_info sharp_lcd_mode = {
-    .pixclock		= 78000,
-    .xres		= 640,
-    .yres		= 480,
-    .bpp		= 8,
-    .hsync_len		= 4,
-    .left_margin	= 4,
-    .right_margin	= 4,
-    .vsync_len		= 2,
-    .upper_margin	= 0,
-    .lower_margin	= 0,
-    .sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-    .cmap_greyscale	= 0,
+	.pixclock	= 78000,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 8,
+	.hsync_len	= 4,
+	.left_margin	= 4,
+	.right_margin	= 4,
+	.vsync_len	= 2,
+	.upper_margin	= 0,
+	.lower_margin	= 0,
+	.sync		= FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+	.cmap_greyscale	= 0,
 };
 
 static struct pxafb_mach_info sharp_lcd = {
-    .modes		= &sharp_lcd_mode,
-    .num_modes	= 1,
-    .cmap_inverse	= 0,
-    .cmap_static	= 0,
-    .lccr0		= LCCR0_Color | LCCR0_Pas | LCCR0_Dual,
-    .lccr3		= 0x0340ff02,
-    .pxafb_backlight_power = board_backlight_power,
+	.modes		= &sharp_lcd_mode,
+	.num_modes	= 1,
+	.lcd_conn	= LCD_COLOR_DSTN_16BPP | LCD_PCLK_EDGE_FALL,
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.pxafb_backlight_power = board_backlight_power,
 };
 
 static struct pxafb_mode_info toshiba_lcd_mode = {
-    .pixclock		= 39720,
-    .xres		= 640,
-    .yres		= 480,
-    .bpp		= 8,
-    .hsync_len		= 63,
-    .left_margin	= 12,
-    .right_margin	= 12,
-    .vsync_len		= 4,
-    .upper_margin	= 32,
-    .lower_margin	= 10,
-    .sync		= 0,
-    .cmap_greyscale	= 0,
+	.pixclock	= 39720,
+	.xres		= 640,
+	.yres		= 480,
+	.bpp		= 8,
+	.hsync_len	= 63,
+	.left_margin	= 12,
+	.right_margin	= 12,
+	.vsync_len	= 4,
+	.upper_margin	= 32,
+	.lower_margin	= 10,
+	.sync		= 0,
+	.cmap_greyscale	= 0,
 };
 
 static struct pxafb_mach_info toshiba_lcd = {
-    .modes		= &toshiba_lcd_mode,
-    .num_modes	= 1,
-    .cmap_inverse	= 0,
-    .cmap_static	= 0,
-    .lccr0		= LCCR0_Color | LCCR0_Act,
-    .lccr3		= 0x03400002,
-    .pxafb_backlight_power = board_backlight_power,
+	.modes		= &toshiba_lcd_mode,
+	.num_modes	= 1,
+	.lcd_conn	= (LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL),
+	.cmap_inverse	= 0,
+	.cmap_static	= 0,
+	.pxafb_backlight_power = board_backlight_power,
 };
 
 static void __init trizeps4_init(void)
 {
-	platform_add_devices(trizeps4_devices, ARRAY_SIZE(trizeps4_devices));
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4_pin_config));
+	if (machine_is_trizeps4wl()) {
+		pxa2xx_mfp_config(ARRAY_AND_SIZE(trizeps4wl_pin_config));
+		platform_add_devices(trizeps4wl_devices,
+					ARRAY_SIZE(trizeps4wl_devices));
+	} else {
+		platform_add_devices(trizeps4_devices,
+					ARRAY_SIZE(trizeps4_devices));
+	}
 
-/*	set_pxa_fb_info(&sharp_lcd); */
-	set_pxa_fb_info(&toshiba_lcd);
+	if (0)	/* dont know how to determine LCD */
+		set_pxa_fb_info(&sharp_lcd);
+	else
+		set_pxa_fb_info(&toshiba_lcd);
 
 	pxa_set_mci_info(&trizeps4_mci_platform_data);
+#ifndef STATUS_LEDS_ON_STUART_PINS
 	pxa_set_ficp_info(&trizeps4_ficp_platform_data);
+#endif
 	pxa_set_ohci_info(&trizeps4_ohci_platform_data);
-}
-
-static void __init trizeps4_map_io(void)
-{
-	pxa_map_io();
-	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+	pxa_set_ac97_info(NULL);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, trizeps4_i2c_devices,
+					ARRAY_SIZE(trizeps4_i2c_devices));
 
-	/* for DiskOnChip */
-	pxa_gpio_mode(GPIO15_nCS_1_MD);
-
-	/* for off-module PIC on ConXS board */
-	pxa_gpio_mode(GPIO_PIC | GPIO_IN);
-
-	/* UCB1400 irq */
-	pxa_gpio_mode(GPIO_UCB1400 | GPIO_IN);
-
-	/* for DM9000 LAN */
-	pxa_gpio_mode(GPIO78_nCS_2_MD);
-	pxa_gpio_mode(GPIO_DM9000 | GPIO_IN);
-
-	/* for PCMCIA device */
-	pxa_gpio_mode(GPIO_PCD | GPIO_IN);
-	pxa_gpio_mode(GPIO_PRDY | GPIO_IN);
-
-	/* for I2C adapter */
-	pxa_gpio_mode(GPIO117_I2CSCL_MD);
-	pxa_gpio_mode(GPIO118_I2CSDA_MD);
-
-	/* MMC_DET s.o. */
-	pxa_gpio_mode(GPIO_MMC_DET | GPIO_IN);
-
-	/* whats that for ??? */
-	pxa_gpio_mode(GPIO79_nCS_3_MD);
-
-#ifdef CONFIG_LEDS
-	pxa_gpio_mode( GPIO_SYS_BUSY_LED  | GPIO_OUT);		/* LED1 */
-	pxa_gpio_mode( GPIO_HEARTBEAT_LED | GPIO_OUT);		/* LED2 */
-#endif
-#ifdef CONFIG_MACH_TRIZEPS4_CONXS
 #ifdef CONFIG_IDE_PXA_CF
 	/* if boot direct from compact flash dont disable power */
 	trizeps_conxs_bcr = 0x0009;
@@ -484,17 +545,24 @@ static void __init trizeps4_map_io(void)
 	/* this is the reset value */
 	trizeps_conxs_bcr = 0x00A0;
 #endif
-	ConXS_BCR = trizeps_conxs_bcr;
-#endif
+	BCR_writew(trizeps_conxs_bcr);
+	board_backlight_power(1);
+}
 
-	PWER  = 0x00000002;
-	PFER  = 0x00000000;
-	PRER  = 0x00000002;
-	PGSR0 = 0x0158C000;
-	PGSR1 = 0x00FF0080;
-	PGSR2 = 0x0001C004;
-	/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
-	PCFR |= PCFR_OPDE;
+static void __init trizeps4_map_io(void)
+{
+	pxa_map_io();
+	iotable_init(trizeps4_io_desc, ARRAY_SIZE(trizeps4_io_desc));
+
+	if ((MSC0 & 0x8) && (BOOT_DEF & 0x1)) {
+		/* if flash is 16 bit wide its a Trizeps4 WL */
+		__machine_arch_type = MACH_TYPE_TRIZEPS4WL;
+		trizeps4_flash_data[0].width = 2;
+	} else {
+		/* if flash is 32 bit wide its a Trizeps4 */
+		__machine_arch_type = MACH_TYPE_TRIZEPS4;
+		trizeps4_flash_data[0].width = 4;
+	}
 }
 
 MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
@@ -508,3 +576,13 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module")
 	.timer		= &pxa_timer,
 MACHINE_END
 
+MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module")
+	/* MAINTAINER("Jürgen Schindele") */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= TRIZEPS4_SDRAM_BASE + 0x100,
+	.init_machine	= trizeps4_init,
+	.map_io		= trizeps4_map_io,
+	.init_irq	= pxa27x_init_irq,
+	.timer		= &pxa_timer,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
new file mode 100644
index 0000000..d7632f6
--- /dev/null
+++ b/arch/arm/mach-pxa/viper.c
@@ -0,0 +1,951 @@
+/*
+ *  linux/arch/arm/mach-pxa/viper.c
+ *
+ *  Support for the Arcom VIPER SBC.
+ *
+ *  Author:	Ian Campbell
+ *  Created:    Feb 03, 2003
+ *  Copyright:  Arcom Control Systems
+ *
+ *  Maintained by Marc Zyngier <maz@misterjones.org>
+ *                             <marc.zyngier@altran.com>
+ *
+ * Based on lubbock.c:
+ *  Author:	Nicolas Pitre
+ *  Created:	Jun 15, 2001
+ *  Copyright:	MontaVista Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/memory.h>
+#include <linux/cpu.h>
+#include <linux/cpufreq.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/module.h>
+#include <linux/pm.h>
+#include <linux/sched.h>
+#include <linux/gpio.h>
+#include <linux/i2c-gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/smc91x.h>
+#include <linux/pwm_backlight.h>
+#include <linux/usb/isp116x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+
+#include <mach/pxa-regs.h>
+#include <mach/pxa2xx-regs.h>
+#include <mach/bitfield.h>
+#include <mach/audio.h>
+#include <mach/pxafb.h>
+#include <mach/mfp-pxa25x.h>
+#include <mach/i2c.h>
+#include <mach/viper.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+#include <asm/sizes.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include "generic.h"
+#include "devices.h"
+
+static unsigned int icr;
+
+static void viper_icr_set_bit(unsigned int bit)
+{
+	icr |= bit;
+	VIPER_ICR = icr;
+}
+
+static void viper_icr_clear_bit(unsigned int bit)
+{
+	icr &= ~bit;
+	VIPER_ICR = icr;
+}
+
+/* This function is used from the pcmcia module to reset the CF */
+void viper_cf_rst(int state)
+{
+	if (state)
+		viper_icr_set_bit(VIPER_ICR_CF_RST);
+	else
+		viper_icr_clear_bit(VIPER_ICR_CF_RST);
+}
+EXPORT_SYMBOL(viper_cf_rst);
+
+/*
+ * The CPLD version register was not present on VIPER boards prior to
+ * v2i1. On v1 boards where the version register is not present we
+ * will just read back the previous value from the databus.
+ *
+ * Therefore we do two reads. The first time we write 0 to the
+ * (read-only) register before reading and the second time we write
+ * 0xff first. If the two reads do not match or they read back as 0xff
+ * or 0x00 then we have version 1 hardware.
+ */
+static u8 viper_hw_version(void)
+{
+	u8 v1, v2;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	VIPER_VERSION = 0;
+	v1 = VIPER_VERSION;
+	VIPER_VERSION = 0xff;
+	v2 = VIPER_VERSION;
+
+	v1 = (v1 != v2 || v1 == 0xff) ? 0 : v1;
+
+	local_irq_restore(flags);
+	return v1;
+}
+
+/* CPU sysdev */
+static int viper_cpu_suspend(struct sys_device *sysdev, pm_message_t state)
+{
+	viper_icr_set_bit(VIPER_ICR_R_DIS);
+	return 0;
+}
+
+static int viper_cpu_resume(struct sys_device *sysdev)
+{
+	viper_icr_clear_bit(VIPER_ICR_R_DIS);
+	return 0;
+}
+
+static struct sysdev_driver viper_cpu_sysdev_driver = {
+	.suspend	= viper_cpu_suspend,
+	.resume		= viper_cpu_resume,
+};
+
+static unsigned int current_voltage_divisor;
+
+/*
+ * If force is not true then step from existing to new divisor. If
+ * force is true then jump straight to the new divisor. Stepping is
+ * used because if the jump in voltage is too large, the VCC can dip
+ * too low and the regulator cuts out.
+ *
+ * force can be used to initialize the divisor to a know state by
+ * setting the value for the current clock speed, since we are already
+ * running at that speed we know the voltage should be pretty close so
+ * the jump won't be too large
+ */
+static void viper_set_core_cpu_voltage(unsigned long khz, int force)
+{
+	int i = 0;
+	unsigned int divisor = 0;
+	const char *v;
+
+	if (khz < 200000) {
+		v = "1.0"; divisor = 0xfff;
+	} else if (khz < 300000) {
+		v = "1.1"; divisor = 0xde5;
+	} else {
+		v = "1.3"; divisor = 0x325;
+	}
+
+	pr_debug("viper: setting CPU core voltage to %sV at %d.%03dMHz\n",
+		 v, (int)khz / 1000, (int)khz % 1000);
+
+#define STEP 0x100
+	do {
+		int step;
+
+		if (force)
+			step = divisor;
+		else if (current_voltage_divisor < divisor - STEP)
+			step = current_voltage_divisor + STEP;
+		else if (current_voltage_divisor > divisor + STEP)
+			step = current_voltage_divisor - STEP;
+		else
+			step = divisor;
+		force = 0;
+
+		gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+		for (i = 1 << 11 ; i > 0 ; i >>= 1) {
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_DATA_GPIO, step & i);
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_CLK_GPIO, 1);
+			udelay(1);
+
+			gpio_set_value(VIPER_PSU_CLK_GPIO, 0);
+		}
+		udelay(1);
+
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 1);
+		udelay(1);
+
+		gpio_set_value(VIPER_PSU_nCS_LD_GPIO, 0);
+
+		current_voltage_divisor = step;
+	} while (current_voltage_divisor != divisor);
+}
+
+/* Interrupt handling */
+static unsigned long viper_irq_enabled_mask;
+
+static void viper_ack_irq(unsigned int irq)
+{
+	int viper_irq = irq - PXA_ISA_IRQ(0);
+
+	if (viper_irq < 8)
+		VIPER_LO_IRQ_STATUS = 1 << viper_irq;
+	else
+		VIPER_HI_IRQ_STATUS = 1 << (viper_irq - 8);
+}
+
+static void viper_mask_irq(unsigned int irq)
+{
+	viper_irq_enabled_mask &= ~(1 << (irq - PXA_ISA_IRQ(0)));
+}
+
+static void viper_unmask_irq(unsigned int irq)
+{
+	viper_irq_enabled_mask |= (1 << (irq - PXA_ISA_IRQ(0)));
+}
+
+static inline unsigned long viper_irq_pending(void)
+{
+	return (VIPER_HI_IRQ_STATUS << 8 | VIPER_LO_IRQ_STATUS) &
+			viper_irq_enabled_mask;
+}
+
+static void viper_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending;
+
+	pending = viper_irq_pending();
+	do {
+		if (likely(pending)) {
+			irq = PXA_ISA_IRQ(0) + __ffs(pending);
+			generic_handle_irq(irq);
+		}
+		pending = viper_irq_pending();
+	} while (pending);
+}
+
+static struct irq_chip viper_irq_chip = {
+	.name	= "ISA",
+	.ack	= viper_ack_irq,
+	.mask	= viper_mask_irq,
+	.unmask	= viper_unmask_irq
+};
+
+static void __init viper_init_irq(void)
+{
+	const int isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, 9, 14, 15 };
+	int irq;
+	int isa_irq;
+
+	pxa25x_init_irq();
+
+	/* setup ISA IRQs */
+	for (irq = 0; irq < ARRAY_SIZE(isa_irqs); irq++) {
+		isa_irq = isa_irqs[irq];
+		set_irq_chip(isa_irq, &viper_irq_chip);
+		set_irq_handler(isa_irq, handle_edge_irq);
+		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
+				viper_irq_handler);
+	set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
+
+#ifndef CONFIG_SERIAL_PXA
+	/*
+	 * 8250 doesn't support IRQ_TYPE being passed as part
+	 * of the plat_serial8250_port structure...
+	 */
+	set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
+#endif
+}
+
+/* Flat Panel */
+static struct pxafb_mode_info fb_mode_info[] = {
+	{
+		.pixclock	= 157500,
+
+		.xres		= 320,
+		.yres		= 240,
+
+		.bpp		= 16,
+
+		.hsync_len	= 63,
+		.left_margin	= 7,
+		.right_margin	= 13,
+
+		.vsync_len	= 20,
+		.upper_margin	= 0,
+		.lower_margin	= 0,
+
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info fb_info = {
+	.modes			= fb_mode_info,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+};
+
+static int viper_backlight_init(struct device *dev)
+{
+	int ret;
+
+	/* GPIO9 and 10 control FB backlight. Initialise to off */
+	ret = gpio_request(VIPER_BCKLIGHT_EN_GPIO, "Backlight");
+	if (ret)
+		goto err_request_bckl;
+
+	ret = gpio_request(VIPER_LCD_EN_GPIO, "LCD");
+	if (ret)
+		goto err_request_lcd;
+
+	ret = gpio_direction_output(VIPER_BCKLIGHT_EN_GPIO, 0);
+	if (ret)
+		goto err_dir;
+
+	ret = gpio_direction_output(VIPER_LCD_EN_GPIO, 0);
+	if (ret)
+		goto err_dir;
+
+	return 0;
+
+err_dir:
+	gpio_free(VIPER_LCD_EN_GPIO);
+err_request_lcd:
+	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+err_request_bckl:
+	dev_err(dev, "Failed to setup LCD GPIOs\n");
+
+	return ret;
+}
+
+static int viper_backlight_notify(int brightness)
+{
+	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
+	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
+
+	return brightness;
+}
+
+static void viper_backlight_exit(struct device *dev)
+{
+	gpio_free(VIPER_LCD_EN_GPIO);
+	gpio_free(VIPER_BCKLIGHT_EN_GPIO);
+}
+
+static struct platform_pwm_backlight_data viper_backlight_data = {
+	.pwm_id		= 0,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 1000000,
+	.init		= viper_backlight_init,
+	.notify		= viper_backlight_notify,
+	.exit		= viper_backlight_exit,
+};
+
+static struct platform_device viper_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent		= &pxa25x_device_pwm0.dev,
+		.platform_data	= &viper_backlight_data,
+	},
+};
+
+/* Ethernet */
+static struct resource smc91x_resources[] = {
+	[0] = {
+		.name	= "smc91x-regs",
+		.start  = VIPER_ETH_PHYS + 0x300,
+		.end    = VIPER_ETH_PHYS + 0x30f,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = gpio_to_irq(VIPER_ETH_GPIO),
+		.end    = gpio_to_irq(VIPER_ETH_GPIO),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+	[2] = {
+		.name	= "smc91x-data32",
+		.start  = VIPER_ETH_DATA_PHYS,
+		.end    = VIPER_ETH_DATA_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+};
+
+static struct smc91x_platdata viper_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
+static struct platform_device smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources  = ARRAY_SIZE(smc91x_resources),
+	.resource       = smc91x_resources,
+	.dev		= {
+		.platform_data	= &viper_smc91x_info,
+	},
+};
+
+/* i2c */
+static struct i2c_gpio_platform_data i2c_bus_data = {
+	.sda_pin = VIPER_RTC_I2C_SDA_GPIO,
+	.scl_pin = VIPER_RTC_I2C_SCL_GPIO,
+	.udelay  = 10,
+	.timeout = 100,
+};
+
+static struct platform_device i2c_bus_device = {
+	.name		= "i2c-gpio",
+	.id		= 1, /* pxa2xx-i2c is bus 0, so start at 1 */
+	.dev = {
+		.platform_data = &i2c_bus_data,
+	}
+};
+
+static struct i2c_board_info __initdata viper_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("ds1338", 0x68),
+	},
+};
+
+/*
+ * Serial configuration:
+ * You can either have the standard PXA ports driven by the PXA driver,
+ * or all the ports (PXA + 16850) driven by the 8250 driver.
+ * Choose your poison.
+ */
+
+static struct resource viper_serial_resources[] = {
+#ifndef CONFIG_SERIAL_PXA
+	{
+		.start	= 0x40100000,
+		.end	= 0x4010001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40200000,
+		.end	= 0x4020001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40700000,
+		.end	= 0x4070001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= VIPER_UARTA_PHYS,
+		.end	= VIPER_UARTA_PHYS + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= VIPER_UARTB_PHYS,
+		.end	= VIPER_UARTB_PHYS + 0xf,
+		.flags	= IORESOURCE_MEM,
+	},
+#else
+	{
+		0,
+	},
+#endif
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+#ifndef CONFIG_SERIAL_PXA
+	/* Internal UARTs */
+	{
+		.membase	= (void *)&FFUART,
+		.mapbase	= __PREG(FFUART),
+		.irq		= IRQ_FFUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{
+		.membase	= (void *)&BTUART,
+		.mapbase	= __PREG(BTUART),
+		.irq		= IRQ_BTUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{
+		.membase	= (void *)&STUART,
+		.mapbase	= __PREG(STUART),
+		.irq		= IRQ_STUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	/* External UARTs */
+	{
+		.mapbase	= VIPER_UARTA_PHYS,
+		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.uartclk	= 1843200,
+		.regshift	= 1,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+				  UPF_SKIP_TEST,
+	},
+	{
+		.mapbase	= VIPER_UARTB_PHYS,
+		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.uartclk	= 1843200,
+		.regshift	= 1,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_IOREMAP |
+				  UPF_SKIP_TEST,
+	},
+#endif
+	{ },
+};
+
+static struct platform_device serial_device = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= serial_platform_data,
+	},
+	.num_resources		= ARRAY_SIZE(viper_serial_resources),
+	.resource		= viper_serial_resources,
+};
+
+/* USB */
+static void isp116x_delay(struct device *dev, int delay)
+{
+	ndelay(delay);
+}
+
+static struct resource isp116x_resources[] = {
+	[0] = { /* DATA */
+		.start  = VIPER_USB_PHYS + 0,
+		.end    = VIPER_USB_PHYS + 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = { /* ADDR */
+		.start  = VIPER_USB_PHYS + 2,
+		.end    = VIPER_USB_PHYS + 3,
+		.flags  = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start  = gpio_to_irq(VIPER_USB_GPIO),
+		.end    = gpio_to_irq(VIPER_USB_GPIO),
+		.flags  = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+/* (DataBusWidth16|AnalogOCEnable|DREQOutputPolarity|DownstreamPort15KRSel ) */
+static struct isp116x_platform_data isp116x_platform_data = {
+	/* Enable internal resistors on downstream ports */
+	.sel15Kres		= 1,
+	/* On-chip overcurrent protection */
+	.oc_enable		= 1,
+	/* INT output polarity */
+	.int_act_high		= 1,
+	/* INT edge or level triggered */
+	.int_edge_triggered	= 0,
+
+	/* WAKEUP pin connected - NOT SUPPORTED  */
+	/* .remote_wakeup_connected = 0, */
+	/* Wakeup by devices on usb bus enabled */
+	.remote_wakeup_enable	= 0,
+	.delay			= isp116x_delay,
+};
+
+static struct platform_device isp116x_device = {
+	.name			= "isp116x-hcd",
+	.id			= -1,
+	.num_resources  	= ARRAY_SIZE(isp116x_resources),
+	.resource       	= isp116x_resources,
+	.dev			= {
+		.platform_data	= &isp116x_platform_data,
+	},
+
+};
+
+/* MTD */
+static struct resource mtd_resources[] = {
+	[0] = {	/* RedBoot config + filesystem flash */
+		.start	= VIPER_FLASH_PHYS,
+		.end	= VIPER_FLASH_PHYS + SZ_32M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {	/* Boot flash */
+		.start	= VIPER_BOOT_PHYS,
+		.end	= VIPER_BOOT_PHYS + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[2] = { /*
+		 * SRAM size is actually 256KB, 8bits, with a sparse mapping
+		 * (each byte is on a 16bit boundary).
+		 */
+		.start	= _VIPER_SRAM_BASE,
+		.end	= _VIPER_SRAM_BASE + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct mtd_partition viper_boot_flash_partition = {
+	.name		= "RedBoot",
+	.size		= SZ_1M,
+	.offset		= 0,
+	.mask_flags	= MTD_WRITEABLE,	/* force R/O */
+};
+
+static struct physmap_flash_data viper_flash_data[] = {
+	[0] = {
+		.width		= 2,
+		.parts		= NULL,
+		.nr_parts	= 0,
+	},
+	[1] = {
+		.width		= 2,
+		.parts		= &viper_boot_flash_partition,
+		.nr_parts	= 1,
+	},
+};
+
+static struct platform_device viper_mtd_devices[] = {
+	[0] = {
+		.name		= "physmap-flash",
+		.id		= 0,
+		.dev		= {
+			.platform_data	= &viper_flash_data[0],
+		},
+		.resource	= &mtd_resources[0],
+		.num_resources	= 1,
+	},
+	[1] = {
+		.name		= "physmap-flash",
+		.id		= 1,
+		.dev		= {
+			.platform_data	= &viper_flash_data[1],
+		},
+		.resource	= &mtd_resources[1],
+		.num_resources	= 1,
+	},
+};
+
+static struct platform_device *viper_devs[] __initdata = {
+	&smc91x_device,
+	&i2c_bus_device,
+	&serial_device,
+	&isp116x_device,
+	&viper_mtd_devices[0],
+	&viper_mtd_devices[1],
+	&viper_backlight_device,
+};
+
+static mfp_cfg_t viper_pin_config[] __initdata = {
+	/* Chip selects */
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO79_nCS_3,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+
+	/* FP Backlight */
+	GPIO9_GPIO, 				/* VIPER_BCKLIGHT_EN_GPIO */
+	GPIO10_GPIO,				/* VIPER_LCD_EN_GPIO */
+	GPIO16_PWM0_OUT,
+
+	/* Ethernet PHY Ready */
+	GPIO18_RDY,
+
+	/* Serial shutdown */
+	GPIO12_GPIO | MFP_LPM_DRIVE_HIGH,	/* VIPER_UART_SHDN_GPIO */
+
+	/* Compact-Flash / PC104 */
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO52_nPCE_1,
+	GPIO53_nPCE_2,
+	GPIO54_nPSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO8_GPIO,				/* VIPER_CF_RDY_GPIO */
+	GPIO32_GPIO,				/* VIPER_CF_CD_GPIO */
+	GPIO82_GPIO,				/* VIPER_CF_POWER_GPIO */
+
+	/* Integrated UPS control */
+	GPIO20_GPIO,				/* VIPER_UPS_GPIO */
+
+	/* Vcc regulator control */
+	GPIO6_GPIO,				/* VIPER_PSU_DATA_GPIO */
+	GPIO11_GPIO,				/* VIPER_PSU_CLK_GPIO */
+	GPIO19_GPIO,				/* VIPER_PSU_nCS_LD_GPIO */
+
+	/* i2c busses */
+	GPIO26_GPIO,				/* VIPER_TPM_I2C_SDA_GPIO */
+	GPIO27_GPIO,				/* VIPER_TPM_I2C_SCL_GPIO */
+	GPIO83_GPIO,				/* VIPER_RTC_I2C_SDA_GPIO */
+	GPIO84_GPIO,				/* VIPER_RTC_I2C_SCL_GPIO */
+
+	/* PC/104 Interrupt */
+	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,	/* VIPER_CPLD_GPIO */
+};
+
+static unsigned long viper_tpm;
+
+static int __init viper_tpm_setup(char *str)
+{
+	strict_strtoul(str, 10, &viper_tpm);
+	return 1;
+}
+
+__setup("tpm=", viper_tpm_setup);
+
+static void __init viper_tpm_init(void)
+{
+	struct platform_device *tpm_device;
+	struct i2c_gpio_platform_data i2c_tpm_data = {
+		.sda_pin = VIPER_TPM_I2C_SDA_GPIO,
+		.scl_pin = VIPER_TPM_I2C_SCL_GPIO,
+		.udelay  = 10,
+		.timeout = 100,
+	};
+	char *errstr;
+
+	/* Allocate TPM i2c bus if requested */
+	if (!viper_tpm)
+		return;
+
+	tpm_device = platform_device_alloc("i2c-gpio", 2);
+	if (tpm_device) {
+		if (!platform_device_add_data(tpm_device,
+					      &i2c_tpm_data,
+					      sizeof(i2c_tpm_data))) {
+			if (platform_device_add(tpm_device)) {
+				errstr = "register TPM i2c bus";
+				goto error_free_tpm;
+			}
+		} else {
+			errstr = "allocate TPM i2c bus data";
+			goto error_free_tpm;
+		}
+	} else {
+		errstr = "allocate TPM i2c device";
+		goto error_tpm;
+	}
+
+	return;
+
+error_free_tpm:
+	kfree(tpm_device);
+error_tpm:
+	pr_err("viper: Couldn't %s, giving up\n", errstr);
+}
+
+static void __init viper_init_vcore_gpios(void)
+{
+	if (gpio_request(VIPER_PSU_DATA_GPIO, "PSU data"))
+		goto err_request_data;
+
+	if (gpio_request(VIPER_PSU_CLK_GPIO, "PSU clock"))
+		goto err_request_clk;
+
+	if (gpio_request(VIPER_PSU_nCS_LD_GPIO, "PSU cs"))
+		goto err_request_cs;
+
+	if (gpio_direction_output(VIPER_PSU_DATA_GPIO, 0) ||
+	    gpio_direction_output(VIPER_PSU_CLK_GPIO, 0) ||
+	    gpio_direction_output(VIPER_PSU_nCS_LD_GPIO, 0))
+		goto err_dir;
+
+	/* c/should assume redboot set the correct level ??? */
+	viper_set_core_cpu_voltage(get_clk_frequency_khz(0), 1);
+
+	return;
+
+err_dir:
+	gpio_free(VIPER_PSU_nCS_LD_GPIO);
+err_request_cs:
+	gpio_free(VIPER_PSU_CLK_GPIO);
+err_request_clk:
+	gpio_free(VIPER_PSU_DATA_GPIO);
+err_request_data:
+	pr_err("viper: Failed to setup vcore control GPIOs\n");
+}
+
+static void __init viper_init_serial_gpio(void)
+{
+	if (gpio_request(VIPER_UART_SHDN_GPIO, "UARTs shutdown"))
+		goto err_request;
+
+	if (gpio_direction_output(VIPER_UART_SHDN_GPIO, 0))
+		goto err_dir;
+
+	return;
+
+err_dir:
+	gpio_free(VIPER_UART_SHDN_GPIO);
+err_request:
+	pr_err("viper: Failed to setup UART shutdown GPIO\n");
+}
+
+#ifdef CONFIG_CPU_FREQ
+static int viper_cpufreq_notifier(struct notifier_block *nb,
+				  unsigned long val, void *data)
+{
+	struct cpufreq_freqs *freq = data;
+
+	/* TODO: Adjust timings??? */
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (freq->old < freq->new) {
+			/* we are getting faster so raise the voltage
+			 * before we change freq */
+			viper_set_core_cpu_voltage(freq->new, 0);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (freq->old > freq->new) {
+			/* we are slowing down so drop the power
+			 * after we change freq */
+			viper_set_core_cpu_voltage(freq->new, 0);
+		}
+		break;
+	case CPUFREQ_RESUMECHANGE:
+		viper_set_core_cpu_voltage(freq->new, 0);
+		break;
+	default:
+		/* ignore */
+		break;
+	}
+
+	return 0;
+}
+
+static struct notifier_block viper_cpufreq_notifier_block = {
+	.notifier_call  = viper_cpufreq_notifier
+};
+
+static void __init viper_init_cpufreq(void)
+{
+	if (cpufreq_register_notifier(&viper_cpufreq_notifier_block,
+				      CPUFREQ_TRANSITION_NOTIFIER))
+		pr_err("viper: Failed to setup cpufreq notifier\n");
+}
+#else
+static inline void viper_init_cpufreq(void) {}
+#endif
+
+static void viper_power_off(void)
+{
+	pr_notice("Shutting off UPS\n");
+	gpio_set_value(VIPER_UPS_GPIO, 1);
+	/* Spin to death... */
+	while (1);
+}
+
+static void __init viper_init(void)
+{
+	u8 version;
+
+	pm_power_off = viper_power_off;
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
+
+	/* Wake-up serial console */
+	viper_init_serial_gpio();
+
+	set_pxa_fb_info(&fb_info);
+
+	/* v1 hardware cannot use the datacs line */
+	version = viper_hw_version();
+	if (version == 0)
+		smc91x_device.num_resources--;
+
+	pxa_set_i2c_info(NULL);
+	platform_add_devices(viper_devs, ARRAY_SIZE(viper_devs));
+
+	viper_init_vcore_gpios();
+	viper_init_cpufreq();
+
+	sysdev_driver_register(&cpu_sysdev_class, &viper_cpu_sysdev_driver);
+
+	if (version) {
+		pr_info("viper: hardware v%di%d detected. "
+			"CPLD revision %d.\n",
+			VIPER_BOARD_VERSION(version),
+			VIPER_BOARD_ISSUE(version),
+			VIPER_CPLD_REVISION(version));
+		system_rev = (VIPER_BOARD_VERSION(version) << 8) |
+			     (VIPER_BOARD_ISSUE(version) << 4) |
+			     VIPER_CPLD_REVISION(version);
+	} else {
+		pr_info("viper: No version register.\n");
+	}
+
+	i2c_register_board_info(1, ARRAY_AND_SIZE(viper_i2c_devices));
+
+	viper_tpm_init();
+	pxa_set_ac97_info(NULL);
+}
+
+static struct map_desc viper_io_desc[] __initdata = {
+	{
+		.virtual = VIPER_CPLD_BASE,
+		.pfn     = __phys_to_pfn(VIPER_CPLD_PHYS),
+		.length  = 0x00300000,
+		.type    = MT_DEVICE,
+	},
+	{
+		.virtual = VIPER_PC104IO_BASE,
+		.pfn     = __phys_to_pfn(_PCMCIA1IO),
+		.length  = 0x00800000,
+		.type    = MT_DEVICE,
+	},
+};
+
+static void __init viper_map_io(void)
+{
+	pxa_map_io();
+
+	iotable_init(viper_io_desc, ARRAY_SIZE(viper_io_desc));
+
+	PCFR |= PCFR_OPDE;
+}
+
+MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC")
+	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= (io_p2v(0x40000000) >> 18) & 0xfffc,
+	.boot_params	= 0xa0000100,
+	.map_io		= viper_map_io,
+	.init_irq	= viper_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine	= viper_init,
+MACHINE_END
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 4a00280..8138044 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -18,23 +18,30 @@
 #include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
+#include <linux/pwm_backlight.h>
+#include <linux/smc91x.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/hardware.h>
-#include <asm/arch/gpio.h>
-#include <asm/arch/pxafb.h>
-#include <asm/arch/zylonite.h>
-#include <asm/arch/mmc.h>
-#include <asm/arch/pxa27x_keypad.h>
-
+#include <mach/hardware.h>
+#include <mach/audio.h>
+#include <mach/gpio.h>
+#include <mach/pxafb.h>
+#include <mach/zylonite.h>
+#include <mach/mmc.h>
+#include <mach/ohci.h>
+#include <mach/pxa27x_keypad.h>
+#include <mach/pxa3xx_nand.h>
+
+#include "devices.h"
 #include "generic.h"
 
 #define MAX_SLOTS	3
 struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
 
-int gpio_backlight;
 int gpio_eth_irq;
+int gpio_debug_led1;
+int gpio_debug_led2;
 
 int wm9713_irq;
 
@@ -54,18 +61,72 @@ static struct resource smc91x_resources[] = {
 	}
 };
 
+static struct smc91x_platdata zylonite_smc91x_info = {
+	.flags	= SMC91X_USE_8BIT | SMC91X_USE_16BIT |
+		  SMC91X_NOWAIT | SMC91X_USE_DMA,
+};
+
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
+	.dev		= {
+		.platform_data = &zylonite_smc91x_info,
+	},
 };
 
-#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
-static void zylonite_backlight_power(int on)
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+static struct gpio_led zylonite_debug_leds[] = {
+	[0] = {
+		.name			= "zylonite:yellow:1",
+		.default_trigger	= "heartbeat",
+	},
+	[1] = {
+		.name			= "zylonite:yellow:2",
+		.default_trigger	= "default-on",
+	},
+};
+
+static struct gpio_led_platform_data zylonite_debug_leds_info = {
+	.leds		= zylonite_debug_leds,
+	.num_leds	= ARRAY_SIZE(zylonite_debug_leds),
+};
+
+static struct platform_device zylonite_device_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &zylonite_debug_leds_info,
+	}
+};
+
+static void __init zylonite_init_leds(void)
 {
-	gpio_set_value(gpio_backlight, on);
+	zylonite_debug_leds[0].gpio = gpio_debug_led1;
+	zylonite_debug_leds[1].gpio = gpio_debug_led2;
+
+	platform_device_register(&zylonite_device_leds);
 }
+#else
+static inline void zylonite_init_leds(void) {}
+#endif
+
+#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
+static struct platform_pwm_backlight_data zylonite_backlight_data = {
+	.pwm_id		= 3,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device zylonite_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm1.dev,
+		.platform_data	= &zylonite_backlight_data,
+	},
+};
 
 static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
 	.pixclock		= 110000,
@@ -98,7 +159,6 @@ static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
 static struct pxafb_mach_info zylonite_toshiba_lcd_info = {
 	.num_modes      	= 1,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_backlight_power	= zylonite_backlight_power,
 };
 
 static struct pxafb_mode_info sharp_ls037_modes[] = {
@@ -134,13 +194,11 @@ static struct pxafb_mach_info zylonite_sharp_lcd_info = {
 	.modes			= sharp_ls037_modes,
 	.num_modes		= 2,
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
-	.pxafb_backlight_power	= zylonite_backlight_power,
 };
 
 static void __init zylonite_init_lcd(void)
 {
-	/* backlight GPIO: output, default on */
-	gpio_direction_output(gpio_backlight, 1);
+	platform_device_register(&zylonite_backlight_device);
 
 	if (lcd_id & 0x20) {
 		set_pxa_fb_info(&zylonite_sharp_lcd_info);
@@ -250,7 +308,7 @@ static void __init zylonite_init_mmc(void)
 static inline void zylonite_init_mmc(void) {}
 #endif
 
-#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULES)
+#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
 static unsigned int zylonite_matrix_key_map[] = {
 	/* KEY(row, col, key_code) */
 	KEY(0, 0, KEY_A), KEY(0, 1, KEY_B), KEY(0, 2, KEY_C), KEY(0, 5, KEY_D),
@@ -315,6 +373,72 @@ static void __init zylonite_init_keypad(void)
 static inline void zylonite_init_keypad(void) {}
 #endif
 
+#if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
+static struct mtd_partition zylonite_nand_partitions[] = {
+	[0] = {
+		.name        = "Bootloader",
+		.offset      = 0,
+		.size        = 0x060000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[1] = {
+		.name        = "Kernel",
+		.offset      = 0x060000,
+		.size        = 0x200000,
+		.mask_flags  = MTD_WRITEABLE, /* force read-only */
+	},
+	[2] = {
+		.name        = "Filesystem",
+		.offset      = 0x0260000,
+		.size        = 0x3000000,     /* 48M - rootfs */
+	},
+	[3] = {
+		.name        = "MassStorage",
+		.offset      = 0x3260000,
+		.size        = 0x3d40000,
+	},
+	[4] = {
+		.name        = "BBT",
+		.offset      = 0x6FA0000,
+		.size        = 0x80000,
+		.mask_flags  = MTD_WRITEABLE,  /* force read-only */
+	},
+	/* NOTE: we reserve some blocks at the end of the NAND flash for
+	 * bad block management, and the max number of relocation blocks
+	 * differs on different platforms. Please take care with it when
+	 * defining the partition table.
+	 */
+};
+
+static struct pxa3xx_nand_platform_data zylonite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= zylonite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(zylonite_nand_partitions),
+};
+
+static void __init zylonite_init_nand(void)
+{
+	pxa3xx_set_nand_info(&zylonite_nand_info);
+}
+#else
+static inline void zylonite_init_nand(void) {}
+#endif /* CONFIG_MTD_NAND_PXA3xx || CONFIG_MTD_NAND_PXA3xx_MODULE */
+
+#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static struct pxaohci_platform_data zylonite_ohci_info = {
+	.port_mode	= PMM_PERPORT_MODE,
+	.flags		= ENABLE_PORT1 | ENABLE_PORT2 |
+			  POWER_CONTROL_LOW | POWER_SENSE_LOW,
+};
+
+static void __init zylonite_init_ohci(void)
+{
+	pxa_set_ohci_info(&zylonite_ohci_info);
+}
+#else
+static inline void zylonite_init_ohci(void) {}
+#endif /* CONFIG_USB_OHCI_HCD || CONFIG_USB_OHCI_HCD_MODULE */
+
 static void __init zylonite_init(void)
 {
 	/* board-processor specific initialization */
@@ -329,9 +453,13 @@ static void __init zylonite_init(void)
 	smc91x_resources[1].end   = gpio_to_irq(gpio_eth_irq);
 	platform_device_register(&smc91x_device);
 
+	pxa_set_ac97_info(NULL);
 	zylonite_init_lcd();
 	zylonite_init_mmc();
 	zylonite_init_keypad();
+	zylonite_init_nand();
+	zylonite_init_leds();
+	zylonite_init_ohci();
 }
 
 MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)")
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 324fb9d..4653888 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -16,10 +16,13 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
 
 #include <asm/gpio.h>
-#include <asm/arch/mfp-pxa300.h>
-#include <asm/arch/zylonite.h>
+#include <mach/mfp-pxa300.h>
+#include <mach/i2c.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -50,6 +53,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO75_LCD_BIAS,
 	GPIO76_LCD_VSYNC,
 	GPIO127_LCD_CS_N,
+	GPIO20_PWM3_OUT,	/* backlight */
 
 	/* BTUART */
 	GPIO111_UART2_RTS,
@@ -69,6 +73,12 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO27_AC97_SDATA_OUT,
 	GPIO28_AC97_SYNC,
 
+	/* SSP3 */
+	GPIO91_SSP3_SCLK,
+	GPIO92_SSP3_FRM,
+	GPIO93_SSP3_TXD,
+	GPIO94_SSP3_RXD,
+
 	/* WM9713 IRQ */
 	GPIO26_GPIO,
 
@@ -108,6 +118,14 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO12_MMC2_DAT3,
 	GPIO13_MMC2_CLK,
 	GPIO14_MMC2_CMD,
+
+	/* USB Host */
+	GPIO0_2_USBH_PEN,
+	GPIO1_2_USBH_PWR,
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -191,6 +209,39 @@ static void __init zylonite_detect_lcd_panel(void)
 		pxa3xx_mfp_write(lcd_detect_pins[i], mfpr_save[i]);
 }
 
+#if defined(CONFIG_I2C) || defined(CONFIG_I2C_MODULE)
+static struct pca953x_platform_data gpio_exp[] = {
+	[0] = {
+		.gpio_base	= 128,
+	},
+	[1] = {
+		.gpio_base	= 144,
+	},
+};
+
+static struct i2c_board_info zylonite_i2c_board_info[] = {
+	{
+		.type		= "pca9539",
+		.addr		= 0x74,
+		.platform_data	= &gpio_exp[0],
+		.irq		= IRQ_GPIO(18),
+	}, {
+		.type		= "pca9539",
+		.addr		= 0x75,
+		.platform_data	= &gpio_exp[1],
+		.irq		= IRQ_GPIO(19),
+	},
+};
+
+static void __init zylonite_init_i2c(void)
+{
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(zylonite_i2c_board_info));
+}
+#else
+static inline void zylonite_init_i2c(void) {}
+#endif
+
 void __init zylonite_pxa300_init(void)
 {
 	if (cpu_is_pxa300() || cpu_is_pxa310()) {
@@ -200,15 +251,14 @@ void __init zylonite_pxa300_init(void)
 		/* detect LCD panel */
 		zylonite_detect_lcd_panel();
 
-		/* GPIO pin assignment */
-		gpio_backlight = mfp_to_gpio(MFP_PIN_GPIO20);
-
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
 		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
 
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+		zylonite_init_i2c();
 	}
 
 	if (cpu_is_pxa300()) {
@@ -224,4 +274,8 @@ void __init zylonite_pxa300_init(void)
 		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
 		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
+
+	/* GPIOs for Debug LEDs */
+	gpio_debug_led1 = EXT_GPIO(25);
+	gpio_debug_led2 = EXT_GPIO(26);
 }
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 193d079..0f24474 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -17,9 +17,9 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 
-#include <asm/arch/gpio.h>
-#include <asm/arch/mfp-pxa320.h>
-#include <asm/arch/zylonite.h>
+#include <mach/gpio.h>
+#include <mach/mfp-pxa320.h>
+#include <mach/zylonite.h>
 
 #include "generic.h"
 
@@ -49,6 +49,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO15_2_LCD_LCLK,
 	GPIO16_2_LCD_PCLK,
 	GPIO17_2_LCD_BIAS,
+	GPIO14_PWM3_OUT,	/* backlight */
 
 	/* FFUART */
 	GPIO41_UART1_RXD | MFP_LPM_EDGE_FALL,
@@ -68,6 +69,12 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO39_AC97_BITCLK,
 	GPIO40_AC97_nACRESET,
 
+	/* SSP3 */
+	GPIO89_SSP3_SCLK,
+	GPIO90_SSP3_FRM,
+	GPIO91_SSP3_TXD,
+	GPIO92_SSP3_RXD,
+
 	/* WM9713 IRQ */
 	GPIO15_GPIO,
 
@@ -115,6 +122,14 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
 	GPIO27_MMC2_DAT3,
 	GPIO28_MMC2_CLK,
 	GPIO29_MMC2_CMD,
+
+	/* USB Host */
+	GPIO2_2_USBH_PEN,
+	GPIO3_2_USBH_PWR,
+
+	/* Debug LEDs */
+	GPIO1_2_GPIO | MFP_LPM_DRIVE_HIGH,
+	GPIO4_2_GPIO | MFP_LPM_DRIVE_HIGH,
 };
 
 #define NUM_LCD_DETECT_PINS	7
@@ -187,8 +202,9 @@ void __init zylonite_pxa320_init(void)
 		zylonite_detect_lcd_panel();
 
 		/* GPIO pin assignment */
-		gpio_backlight	= mfp_to_gpio(MFP_PIN_GPIO14);
 		gpio_eth_irq	= mfp_to_gpio(MFP_PIN_GPIO9);
+		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
+		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
 		/* MMC card detect & write protect for controller 0 */
 		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);