summaryrefslogtreecommitdiff
path: root/arch/arm/mach-shmobile/setup-r8a7778.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 07:49:45 (GMT)
committerLinus Torvalds <torvalds@linux-foundation.org>2013-11-11 07:49:45 (GMT)
commitaac59e3efce3dca787b11e34726001603ce3d161 (patch)
tree855d3f967b102877a179e23382be3c2c7fc8d66c /arch/arm/mach-shmobile/setup-r8a7778.c
parent21604cdcdcf9ea8c16b1656f78e2eff097244d66 (diff)
parent005ff5fb077ebf93882bd643932f932a9b402529 (diff)
downloadlinux-fsl-qoriq-aac59e3efce3dca787b11e34726001603ce3d161.tar.xz
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC platform changes from Olof Johansson: "New and updated SoC support. Among the things new for this release are: - More support for the AM33xx platforms from TI - Tegra 124 support, and some updates to older tegra families as well - imx cleanups and updates across the board - A rename of Broadcom's Mobile platforms which were introduced as ARCH_BCM, and turned out to be too broad a name. New name is ARCH_BCM_MOBILE. - A whole bunch of updates and fixes for integrator, making the platform code more modern and switches over to DT-only booting. - Support for two new Renesas shmobile chipsets. Next up for them is more work on consolidation instead of introduction of new non-multiplatform SoCs, we're all looking forward to that! - Misc cleanups for older Samsung platforms, some Allwinner updates, etc" * tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (159 commits) ARM: bcm281xx: Add ARCH_BCM_MOBILE to bcm config ARM: bcm_defconfig: Run "make savedefconfig" ARM: bcm281xx: Add ARCH Timers to config rename ARCH_BCM to ARCH_BCM_MOBILE (mach-bcm) ARM: vexpress: Enable platform-specific options in defconfig ARM: vexpress: Make defconfig work again ARM: sunxi: remove .init_time hooks ARM: imx: enable suspend for imx6sl ARM: imx: ensure dsm_request signal is not asserted when setting LPM ARM: imx6q: call WB and RBC configuration from imx6q_pm_enter() ARM: imx6q: move low-power code out of clock driver ARM: imx: drop extern with function prototypes in common.h ARM: imx: reset core along with enable/disable operation ARM: imx: do not return from imx_cpu_die() call ARM: imx_v6_v7_defconfig: Select CONFIG_PROVE_LOCKING ARM: imx_v6_v7_defconfig: Enable LEDS_GPIO related options ARM: mxs_defconfig: Turn off CONFIG_DEBUG_GPIO ARM: imx: replace imx6q_restart() with mxc_restart() ARM: mach-imx: mm-imx5: Retrieve iomuxc base address from dt ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt ...
Diffstat (limited to 'arch/arm/mach-shmobile/setup-r8a7778.c')
-rw-r--r--arch/arm/mach-shmobile/setup-r8a7778.c128
1 files changed, 116 insertions, 12 deletions
diff --git a/arch/arm/mach-shmobile/setup-r8a7778.c b/arch/arm/mach-shmobile/setup-r8a7778.c
index 468ee65..03fcc59 100644
--- a/arch/arm/mach-shmobile/setup-r8a7778.c
+++ b/arch/arm/mach-shmobile/setup-r8a7778.c
@@ -24,6 +24,7 @@
#include <linux/irqchip/arm-gic.h>
#include <linux/of.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/dma-rcar-hpbdma.h>
#include <linux/platform_data/gpio-rcar.h>
#include <linux/platform_data/irq-renesas-intc-irqpin.h>
#include <linux/platform_device.h>
@@ -95,29 +96,46 @@ static struct sh_timer_config sh_tmu1_platform_data __initdata = {
&sh_tmu##idx##_platform_data, \
sizeof(sh_tmu##idx##_platform_data))
-/* USB */
-static struct usb_phy *phy;
+int r8a7778_usb_phy_power(bool enable)
+{
+ static struct usb_phy *phy = NULL;
+ int ret = 0;
+
+ if (!phy)
+ phy = usb_get_phy(USB_PHY_TYPE_USB2);
+
+ if (IS_ERR(phy)) {
+ pr_err("kernel doesn't have usb phy driver\n");
+ return PTR_ERR(phy);
+ }
+
+ if (enable)
+ ret = usb_phy_init(phy);
+ else
+ usb_phy_shutdown(phy);
+ return ret;
+}
+
+/* USB */
static int usb_power_on(struct platform_device *pdev)
{
- if (IS_ERR(phy))
- return PTR_ERR(phy);
+ int ret = r8a7778_usb_phy_power(true);
+
+ if (ret)
+ return ret;
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
- usb_phy_init(phy);
-
return 0;
}
static void usb_power_off(struct platform_device *pdev)
{
- if (IS_ERR(phy))
+ if (r8a7778_usb_phy_power(false))
return;
- usb_phy_shutdown(phy);
-
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
}
@@ -291,6 +309,88 @@ void __init r8a7778_add_dt_devices(void)
r8a7778_register_tmu(1);
}
+/* HPB-DMA */
+
+/* Asynchronous mode register (ASYNCMDR) bits */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MASK BIT(2) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_SINGLE BIT(2) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD22_MULTI 0 /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MASK BIT(1) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_SINGLE BIT(1) /* SDHI0 */
+#define HPB_DMAE_ASYNCMDR_ASMD21_MULTI 0 /* SDHI0 */
+
+static const struct hpb_dmae_slave_config hpb_dmae_slaves[] = {
+ {
+ .id = HPBDMA_SLAVE_SDHI0_TX,
+ .addr = 0xffe4c000 + 0x30,
+ .dcr = HPB_DMAE_DCR_SPDS_16BIT |
+ HPB_DMAE_DCR_DMDL |
+ HPB_DMAE_DCR_DPDS_16BIT,
+ .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
+ HPB_DMAE_ASYNCRSTR_ASRST22 |
+ HPB_DMAE_ASYNCRSTR_ASRST23,
+ .mdr = HPB_DMAE_ASYNCMDR_ASMD21_MULTI,
+ .mdm = HPB_DMAE_ASYNCMDR_ASMD21_MASK,
+ .port = 0x0D0C,
+ .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+ .dma_ch = 21,
+ }, {
+ .id = HPBDMA_SLAVE_SDHI0_RX,
+ .addr = 0xffe4c000 + 0x30,
+ .dcr = HPB_DMAE_DCR_SMDL |
+ HPB_DMAE_DCR_SPDS_16BIT |
+ HPB_DMAE_DCR_DPDS_16BIT,
+ .rstr = HPB_DMAE_ASYNCRSTR_ASRST21 |
+ HPB_DMAE_ASYNCRSTR_ASRST22 |
+ HPB_DMAE_ASYNCRSTR_ASRST23,
+ .mdr = HPB_DMAE_ASYNCMDR_ASMD22_MULTI,
+ .mdm = HPB_DMAE_ASYNCMDR_ASMD22_MASK,
+ .port = 0x0D0C,
+ .flags = HPB_DMAE_SET_ASYNC_RESET | HPB_DMAE_SET_ASYNC_MODE,
+ .dma_ch = 22,
+ },
+};
+
+static const struct hpb_dmae_channel hpb_dmae_channels[] = {
+ HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_TX), /* ch. 21 */
+ HPB_DMAE_CHANNEL(0x7e, HPBDMA_SLAVE_SDHI0_RX), /* ch. 22 */
+};
+
+static struct hpb_dmae_pdata dma_platform_data __initdata = {
+ .slaves = hpb_dmae_slaves,
+ .num_slaves = ARRAY_SIZE(hpb_dmae_slaves),
+ .channels = hpb_dmae_channels,
+ .num_channels = ARRAY_SIZE(hpb_dmae_channels),
+ .ts_shift = {
+ [XMIT_SZ_8BIT] = 0,
+ [XMIT_SZ_16BIT] = 1,
+ [XMIT_SZ_32BIT] = 2,
+ },
+ .num_hw_channels = 39,
+};
+
+static struct resource hpb_dmae_resources[] __initdata = {
+ /* Channel registers */
+ DEFINE_RES_MEM(0xffc08000, 0x1000),
+ /* Common registers */
+ DEFINE_RES_MEM(0xffc09000, 0x170),
+ /* Asynchronous reset registers */
+ DEFINE_RES_MEM(0xffc00300, 4),
+ /* Asynchronous mode registers */
+ DEFINE_RES_MEM(0xffc00400, 4),
+ /* IRQ for DMA channels */
+ DEFINE_RES_NAMED(gic_iid(0x7b), 5, NULL, IORESOURCE_IRQ),
+};
+
+static void __init r8a7778_register_hpb_dmae(void)
+{
+ platform_device_register_resndata(&platform_bus, "hpb-dma-engine", -1,
+ hpb_dmae_resources,
+ ARRAY_SIZE(hpb_dmae_resources),
+ &dma_platform_data,
+ sizeof(dma_platform_data));
+}
+
void __init r8a7778_add_standard_devices(void)
{
r8a7778_add_dt_devices();
@@ -301,12 +401,12 @@ void __init r8a7778_add_standard_devices(void)
r8a7778_register_hspi(0);
r8a7778_register_hspi(1);
r8a7778_register_hspi(2);
+
+ r8a7778_register_hpb_dmae();
}
void __init r8a7778_init_late(void)
{
- phy = usb_get_phy(USB_PHY_TYPE_USB2);
-
platform_device_register_full(&ehci_info);
platform_device_register_full(&ohci_info);
}
@@ -328,7 +428,7 @@ static struct resource irqpin_resources[] __initdata = {
DEFINE_RES_IRQ(gic_iid(0x3e)), /* IRQ3 */
};
-void __init r8a7778_init_irq_extpin(int irlm)
+void __init r8a7778_init_irq_extpin_dt(int irlm)
{
void __iomem *icr0 = ioremap_nocache(0xfe780000, PAGE_SIZE);
unsigned long tmp;
@@ -346,7 +446,11 @@ void __init r8a7778_init_irq_extpin(int irlm)
tmp |= (1 << 21); /* LVLMODE = 1 */
iowrite32(tmp, icr0);
iounmap(icr0);
+}
+void __init r8a7778_init_irq_extpin(int irlm)
+{
+ r8a7778_init_irq_extpin_dt(irlm);
if (irlm)
platform_device_register_resndata(
&platform_bus, "renesas_intc_irqpin", -1,