Merge branch 'next/devel' of git://git.linaro.org/people/arnd/arm-soc

* 'next/devel' of git://git.linaro.org/people/arnd/arm-soc: (50 commits)
  ARM: tegra: update defconfig
  arm/tegra: Harmony: Configure PMC for low-level interrupts
  arm/tegra: device tree support for ventana board
  arm/tegra: add support for ventana pinmuxing
  arm/tegra: prepare Seaboard pinmux code for derived boards
  arm/tegra: pinmux: ioremap registers
  gpio/tegra: Convert to a platform device
  arm/tegra: Convert pinmux driver to a platform device
  arm/dt: Tegra: Add pinmux node to tegra20.dtsi
  arm/tegra: Prep boards for gpio/pinmux conversion to pdevs
  ARM: mx5: fix clock usage for suspend
  ARM i.MX entry-macro.S: remove now unused code
  ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER
  ARM i.MX tzic: add handle_irq function
  ARM i.MX avic: add handle_irq function
  ARM: mx25: Add the missing IIM base definition
  ARM i.MX avic: convert to use generic irq chip
  mx31moboard: Add poweroff support
  ARM: mach-qong: Add watchdog support
  ARM: davinci: AM18x: Add wl1271/wlan support
  ...

Fix up conflicts in:
	arch/arm/mach-at91/at91sam9g45.c
	arch/arm/mach-mx5/devices-imx53.h
	arch/arm/plat-mxc/include/mach/memory.h

5 files changed, 24 insertions, 73 deletions

diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index d7149d1..ace4bb5 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -82,4 +82,19 @@ enum mxc_cpu_pwr_mode {
 
 extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode);
 extern void (*imx_idle)(void);
+extern void imx_print_silicon_rev(const char *cpu, int srev);
+
+void avic_handle_irq(struct pt_regs *);
+void tzic_handle_irq(struct pt_regs *);
+
+#define imx1_handle_irq avic_handle_irq
+#define imx21_handle_irq avic_handle_irq
+#define imx25_handle_irq avic_handle_irq
+#define imx27_handle_irq avic_handle_irq
+#define imx31_handle_irq avic_handle_irq
+#define imx35_handle_irq avic_handle_irq
+#define imx50_handle_irq tzic_handle_irq
+#define imx51_handle_irq tzic_handle_irq
+#define imx53_handle_irq tzic_handle_irq
+
 #endif
diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S
index 066d464..842fbcb 100644
--- a/arch/arm/plat-mxc/include/mach/entry-macro.S
+++ b/arch/arm/plat-mxc/include/mach/entry-macro.S
@@ -9,72 +9,16 @@
  * published by the Free Software Foundation.
  */
 
-#include <mach/hardware.h>
+/* Unused, we use CONFIG_MULTI_IRQ_HANDLER */
 
-#define AVIC_NIMASK	0x04
-
-	@ this macro disables fast irq (not implemented)
 	.macro	disable_fiq
 	.endm
 
 	.macro  get_irqnr_preamble, base, tmp
-#ifndef CONFIG_MXC_TZIC
-	ldr	\base, =avic_base
-	ldr	\base, [\base]
-#ifdef CONFIG_MXC_IRQ_PRIOR
-	ldr	r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
-	ldr	\base, =tzic_base
-	ldr	\base, [\base]
-#endif /* CONFIG_MXC_TZIC */
 	.endm
 
 	.macro  arch_ret_to_user, tmp1, tmp2
 	.endm
 
-	@ this macro checks which interrupt occurred
-	@ and returns its number in irqnr
-	@ and returns if an interrupt occurred in irqstat
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-#ifndef CONFIG_MXC_TZIC
-	@ Load offset & priority of the highest priority
-	@ interrupt pending from AVIC_NIVECSR
-	ldr	\irqstat, [\base, #0x40]
-	@ Shift to get the decoded IRQ number, using ASR so
-	@ 'no interrupt pending' becomes 0xffffffff
-	mov	\irqnr, \irqstat, asr #16
-	@ set zero flag if IRQ + 1 == 0
-	adds	\tmp, \irqnr, #1
-#ifdef CONFIG_MXC_IRQ_PRIOR
-	bicne	\tmp, \irqstat, #0xFFFFFFE0
-	strne	\tmp, [\base, #AVIC_NIMASK]
-	streq	r4, [\base, #AVIC_NIMASK]
-#endif
-#elif defined CONFIG_MXC_TZIC
-	@ Load offset & priority of the highest priority
-	@ interrupt pending.
-	@ 0x080 is INTSEC0 register
-	@ 0xD80 is HIPND0 register
-	mov     \irqnr, #0
-1000:	add	\irqstat, \base, \irqnr, lsr #3
-	ldr	\tmp, [\irqstat, #0xd80]
-	ldr	\irqstat, [\irqstat, #0x080]
-	ands	\tmp, \tmp, \irqstat
-	bne	1001f
-	add	\irqnr, \irqnr, #32
-	cmp     \irqnr, #128
-	blo     1000b
-	b       2001f
-1001:	mov     \irqstat, #1
-1002:	tst     \tmp, \irqstat
-	bne     2002f
-	movs    \tmp, \tmp, lsr #1
-	addne   \irqnr, \irqnr, #1
-	bne     1002b
-2001:
-	mov  \irqnr, #0
-2002:
-	movs \irqnr, \irqnr
-#endif
 	.endm
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index c92f0b1..63f22a0 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -735,6 +735,7 @@ enum iomux_pins {
 #define MX31_PIN_KEY_COL5_KEY_COL5	IOMUX_MODE(MX31_PIN_KEY_COL5, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_COL6_KEY_COL6	IOMUX_MODE(MX31_PIN_KEY_COL6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_KEY_COL7_KEY_COL7	IOMUX_MODE(MX31_PIN_KEY_COL7, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_WATCHDOG_RST__WATCHDOG_RST	IOMUX_MODE(MX31_PIN_WATCHDOG_RST, IOMUX_CONFIG_FUNC)
 
 
 /*
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index 087cd7a..ccebf5b 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -41,6 +41,7 @@
 #define MX25_SSI2_BASE_ADDR		0x50014000
 #define MX25_SSI1_BASE_ADDR		0x50034000
 #define MX25_NFC_BASE_ADDR		0xbb000000
+#define MX25_IIM_BASE_ADDR		0x53ff0000
 #define MX25_DRYICE_BASE_ADDR		0x53ffc000
 #define MX25_ESDHC1_BASE_ADDR		0x53fb4000
 #define MX25_ESDHC2_BASE_ADDR		0x53fb8000
@@ -104,4 +105,8 @@
 #define MX25_DMA_REQ_SSI1_RX0	28
 #define MX25_DMA_REQ_SSI1_TX0	29
 
+#ifndef __ASSEMBLY__
+extern int mx25_revision(void);
+#endif
+
 #endif /* ifndef __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 388a407..30dbf42 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -187,22 +187,8 @@
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
-
-extern unsigned int mx31_cpu_rev;
-extern void mx31_read_cpu_rev(void);
-
-static inline int mx31_revision(void)
-{
-	return mx31_cpu_rev;
-}
-
-extern unsigned int mx35_cpu_rev;
-extern void mx35_read_cpu_rev(void);
-
-static inline int mx35_revision(void)
-{
-	return mx35_cpu_rev;
-}
+extern int mx35_revision(void);
+extern int mx31_revision(void);
 #endif
 
 #endif /* ifndef __MACH_MX3x_H__ */