diff options
author | Dan Williams <dan.j.williams@intel.com> | 2010-05-17 23:30:58 (GMT) |
---|---|---|
committer | Dan Williams <dan.j.williams@intel.com> | 2010-05-17 23:30:58 (GMT) |
commit | 0b28330e39bbe0ffee4c56b09fc415fcec595ea3 (patch) | |
tree | fcf504879883763557e696eff81427b1ab78f76b /arch/arm | |
parent | 058276303dbc4ed089c1f7dad0871810b1f5ddf1 (diff) | |
parent | caa20d974c86af496b419eef70010e63b7fab7ac (diff) | |
download | linux-fsl-qoriq-0b28330e39bbe0ffee4c56b09fc415fcec595ea3.tar.xz |
Merge branch 'ioat' into dmaengine
Diffstat (limited to 'arch/arm')
143 files changed, 721 insertions, 196 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 0f23009..6ab6b33 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -172,7 +172,7 @@ not_angel: adr r0, LC0 ARM( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip, sp}) THUMB( ldmia r0, {r1, r2, r3, r4, r5, r6, r11, ip} ) - THUMB( ldr sp, [r0, #28] ) + THUMB( ldr sp, [r0, #32] ) subs r0, r0, r1 @ calculate the delta offset @ if delta is zero, we are diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 6416d5b..dba4c1d 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -18,6 +18,7 @@ #include <linux/string.h> #include <linux/mutex.h> #include <linux/clk.h> +#include <linux/slab.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index ee1d3b8..7974baa 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -21,7 +21,6 @@ #include <linux/ptrace.h> #include <linux/interrupt.h> #include <linux/mm.h> -#include <linux/slab.h> #include <linux/init.h> #include <linux/ioport.h> #include <linux/irq.h> diff --git a/arch/arm/common/locomo.c b/arch/arm/common/locomo.c index 90ae00b..9dff07c 100644 --- a/arch/arm/common/locomo.c +++ b/arch/arm/common/locomo.c @@ -290,7 +290,7 @@ static int locomo_suspend(struct platform_device *dev, pm_message_t state) save->LCM_GPO = locomo_readl(lchip->base + LOCOMO_GPO); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPO); save->LCM_SPICT = locomo_readl(lchip->base + LOCOMO_SPI + LOCOMO_SPICT); /* SPI */ - locomo_writel(0x40, lchip->base + LOCOMO_SPICT); + locomo_writel(0x40, lchip->base + LOCOMO_SPI + LOCOMO_SPICT); save->LCM_GPE = locomo_readl(lchip->base + LOCOMO_GPE); /* GPIO */ locomo_writel(0x00, lchip->base + LOCOMO_GPE); save->LCM_ASD = locomo_readl(lchip->base + LOCOMO_ASD); /* ADSTART */ @@ -418,7 +418,7 @@ __locomo_probe(struct device *me, struct resource *mem, int irq) /* Longtime timer */ locomo_writel(0, lchip->base + LOCOMO_LTINT); /* SPI */ - locomo_writel(0, lchip->base + LOCOMO_SPIIE); + locomo_writel(0, lchip->base + LOCOMO_SPI + LOCOMO_SPIIE); locomo_writel(6 + 8 + 320 + 30 - 10, lchip->base + LOCOMO_ASD); r = locomo_readl(lchip->base + LOCOMO_ASD); @@ -707,7 +707,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 1\n"); - return; + goto out; } /* Send Sub address (LSB is channel select) */ @@ -735,7 +735,7 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 2\n"); - return; + goto out; } /* Send DAC data */ @@ -760,9 +760,9 @@ void locomo_m62332_senddata(struct locomo_dev *ldev, unsigned int dac_data, int udelay(DAC_SCL_HIGH_HOLD_TIME); /* 4.7 usec */ if (locomo_readl(mapbase + LOCOMO_DAC) & LOCOMO_DAC_SDAOEB) { /* High is error */ printk(KERN_WARNING "locomo: m62332_senddata Error 3\n"); - return; } +out: /* stop */ r = locomo_readl(mapbase + LOCOMO_DAC); r &= ~(LOCOMO_DAC_SCLOEB); diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index 72da7e0..0d08d41 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -15,6 +15,7 @@ #include <asm/glue.h> #include <asm/shmparam.h> #include <asm/cachetype.h> +#include <asm/outercache.h> #define CACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT) @@ -219,12 +220,6 @@ struct cpu_cache_fns { void (*dma_flush_range)(const void *, const void *); }; -struct outer_cache_fns { - void (*inv_range)(unsigned long, unsigned long); - void (*clean_range)(unsigned long, unsigned long); - void (*flush_range)(unsigned long, unsigned long); -}; - /* * Select the calling method */ @@ -281,37 +276,6 @@ extern void dmac_flush_range(const void *, const void *); #endif -#ifdef CONFIG_OUTER_CACHE - -extern struct outer_cache_fns outer_cache; - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ - if (outer_cache.inv_range) - outer_cache.inv_range(start, end); -} -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ - if (outer_cache.clean_range) - outer_cache.clean_range(start, end); -} -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ - if (outer_cache.flush_range) - outer_cache.flush_range(start, end); -} - -#else - -static inline void outer_inv_range(unsigned long start, unsigned long end) -{ } -static inline void outer_clean_range(unsigned long start, unsigned long end) -{ } -static inline void outer_flush_range(unsigned long start, unsigned long end) -{ } - -#endif - /* * Copy user data from/to a page which is mapped into a different * processes address space. Really, we want to allow our "user diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h index 7a0690d..b56c138 100644 --- a/arch/arm/include/asm/clkdev.h +++ b/arch/arm/include/asm/clkdev.h @@ -13,6 +13,7 @@ #define __ASM_CLKDEV_H struct clk; +struct device; struct clk_lookup { struct list_head node; diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 328f14a..237282f 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -17,6 +17,7 @@ #ifndef __ASSEMBLY__ struct irqaction; +struct pt_regs; extern void migrate_irqs(void); extern void asm_do_IRQ(unsigned int, struct pt_regs *); diff --git a/arch/arm/include/asm/outercache.h b/arch/arm/include/asm/outercache.h new file mode 100644 index 0000000..25f76ba --- /dev/null +++ b/arch/arm/include/asm/outercache.h @@ -0,0 +1,75 @@ +/* + * arch/arm/include/asm/outercache.h + * + * Copyright (C) 2010 ARM Ltd. + * Written by Catalin Marinas <catalin.marinas@arm.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef __ASM_OUTERCACHE_H +#define __ASM_OUTERCACHE_H + +struct outer_cache_fns { + void (*inv_range)(unsigned long, unsigned long); + void (*clean_range)(unsigned long, unsigned long); + void (*flush_range)(unsigned long, unsigned long); +#ifdef CONFIG_OUTER_CACHE_SYNC + void (*sync)(void); +#endif +}; + +#ifdef CONFIG_OUTER_CACHE + +extern struct outer_cache_fns outer_cache; + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ + if (outer_cache.inv_range) + outer_cache.inv_range(start, end); +} +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ + if (outer_cache.clean_range) + outer_cache.clean_range(start, end); +} +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ + if (outer_cache.flush_range) + outer_cache.flush_range(start, end); +} + +#else + +static inline void outer_inv_range(unsigned long start, unsigned long end) +{ } +static inline void outer_clean_range(unsigned long start, unsigned long end) +{ } +static inline void outer_flush_range(unsigned long start, unsigned long end) +{ } + +#endif + +#ifdef CONFIG_OUTER_CACHE_SYNC +static inline void outer_sync(void) +{ + if (outer_cache.sync) + outer_cache.sync(); +} +#else +static inline void outer_sync(void) +{ } +#endif + +#endif /* __ASM_OUTERCACHE_H */ diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index ca88e6a..4ace45e 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -60,6 +60,8 @@ #include <linux/linkage.h> #include <linux/irqflags.h> +#include <asm/outercache.h> + #define __exception __attribute__((section(".exception.text"))) struct thread_info; @@ -137,10 +139,12 @@ extern unsigned int user_debug; #define dmb() __asm__ __volatile__ ("" : : : "memory") #endif -#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) -#define mb() dmb() +#ifdef CONFIG_ARCH_HAS_BARRIERS +#include <mach/barriers.h> +#elif __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP) +#define mb() do { dsb(); outer_sync(); } while (0) #define rmb() dmb() -#define wmb() dmb() +#define wmb() mb() #else #define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) #define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) @@ -152,9 +156,9 @@ extern unsigned int user_debug; #define smp_rmb() barrier() #define smp_wmb() barrier() #else -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() +#define smp_mb() dmb() +#define smp_rmb() dmb() +#define smp_wmb() dmb() #endif #define read_barrier_depends() do { } while(0) diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index b7cb45b..3b3d2c8 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -27,7 +27,6 @@ #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/slab.h> #include <linux/random.h> #include <linux/smp.h> #include <linux/init.h> diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 60c62c3..2ba7deb 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -22,6 +22,7 @@ #include <linux/kernel.h> #include <linux/kprobes.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/stop_machine.h> #include <linux/stringify.h> #include <asm/traps.h> @@ -393,6 +394,14 @@ void __kprobes jprobe_return(void) /* * Setup an empty pt_regs. Fill SP and PC fields as * they're needed by longjmp_break_handler. + * + * We allocate some slack between the original SP and start of + * our fabricated regs. To be precise we want to have worst case + * covered which is STMFD with all 16 regs so we allocate 2 * + * sizeof(struct_pt_regs)). + * + * This is to prevent any simulated instruction from writing + * over the regs when they are accessing the stack. */ "sub sp, %0, %1 \n\t" "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t" @@ -410,7 +419,7 @@ void __kprobes jprobe_return(void) "ldmia sp, {r0 - pc} \n\t" : : "r" (kcb->jprobe_saved_regs.ARM_sp), - "I" (sizeof(struct pt_regs)), + "I" (sizeof(struct pt_regs) * 2), "J" (offsetof(struct pt_regs, ARM_sp)), "J" (offsetof(struct pt_regs, ARM_pc)), "J" (offsetof(struct pt_regs, ARM_cpsr)) diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index f28c5e9..c628bdf 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -16,9 +16,9 @@ #include <linux/mm.h> #include <linux/elf.h> #include <linux/vmalloc.h> -#include <linux/slab.h> #include <linux/fs.h> #include <linux/string.h> +#include <linux/gfp.h> #include <asm/pgtable.h> #include <asm/sections.h> diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index ba2adef..0e12e0a 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -16,7 +16,6 @@ #include <linux/mm.h> #include <linux/stddef.h> #include <linux/unistd.h> -#include <linux/slab.h> #include <linux/user.h> #include <linux/delay.h> #include <linux/reboot.h> diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 4350f75..c235018 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -15,7 +15,6 @@ #include <linux/module.h> #include <linux/errno.h> #include <linux/sched.h> -#include <linux/slab.h> #include <linux/mm.h> #include <linux/sem.h> #include <linux/msg.h> @@ -27,6 +26,7 @@ #include <linux/file.h> #include <linux/ipc.h> #include <linux/uaccess.h> +#include <linux/slab.h> /* Fork a new task - this creates a new program thread. * This is called indirectly via a small wrapper diff --git a/arch/arm/lib/memmove.S b/arch/arm/lib/memmove.S index 5025c86..938fc14 100644 --- a/arch/arm/lib/memmove.S +++ b/arch/arm/lib/memmove.S @@ -74,7 +74,7 @@ ENTRY(memmove) rsb ip, ip, #32 addne pc, pc, ip @ C is always clear here b 7f -6: nop +6: W(nop) W(ldr) r3, [r1, #-4]! W(ldr) r4, [r1, #-4]! W(ldr) r5, [r1, #-4]! @@ -85,7 +85,7 @@ ENTRY(memmove) add pc, pc, ip nop - nop + W(nop) W(str) r3, [r0, #-4]! W(str) r4, [r0, #-4]! W(str) r5, [r0, #-4]! diff --git a/arch/arm/lib/uaccess_with_memcpy.c b/arch/arm/lib/uaccess_with_memcpy.c index 6b967ff..e2d2f2c 100644 --- a/arch/arm/lib/uaccess_with_memcpy.c +++ b/arch/arm/lib/uaccess_with_memcpy.c @@ -16,6 +16,7 @@ #include <linux/mm.h> #include <linux/sched.h> #include <linux/hardirq.h> /* for in_atomic() */ +#include <linux/gfp.h> #include <asm/current.h> #include <asm/page.h> diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c index b5c5fc6b..3ef6833 100644 --- a/arch/arm/mach-aaec2000/core.c +++ b/arch/arm/mach-aaec2000/core.c @@ -20,6 +20,7 @@ #include <linux/timex.h> #include <linux/signal.h> #include <linux/clk.h> +#include <linux/gfp.h> #include <mach/hardware.h> #include <asm/irq.h> diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index 987fab3..9fcbd6c 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -205,13 +205,25 @@ ENTRY(at91_slow_clock) ldr r3, .saved_pllbr str r3, [r1, #(AT91_CKGR_PLLBR - AT91_PMC)] + tst r3, #(AT91_PMC_MUL & 0xff0000) + bne 1f + tst r3, #(AT91_PMC_MUL & ~0xff0000) + beq 2f +1: wait_pllblock +2: /* Restore PLLA setting */ ldr r3, .saved_pllar str r3, [r1, #(AT91_CKGR_PLLAR - AT91_PMC)] + tst r3, #(AT91_PMC_MUL & 0xff0000) + bne 3f + tst r3, #(AT91_PMC_MUL & ~0xff0000) + beq 4f +3: wait_pllalock +4: #ifdef SLOWDOWN_MASTER_CLOCK /* diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index 7b20fcc..29c0a91 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -28,6 +28,7 @@ #include <linux/interrupt.h> #include <linux/irqreturn.h> #include <linux/proc_fs.h> +#include <linux/slab.h> #include <mach/timer.h> @@ -2220,11 +2221,15 @@ EXPORT_SYMBOL(dma_map_create_descriptor_ring); int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ int dirtied /* non-zero if any of the pages were modified */ ) { + + int rc = 0; int regionIdx; int segmentIdx; DMA_Region_t *region; DMA_Segment_t *segment; + down(&memMap->lock); + for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) { region = &memMap->region[regionIdx]; @@ -2238,7 +2243,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ printk(KERN_ERR "%s: vmalloc'd pages are not yet supported\n", __func__); - return -EINVAL; + rc = -EINVAL; + goto out; } case DMA_MEM_TYPE_KMALLOC: @@ -2275,7 +2281,8 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ printk(KERN_ERR "%s: Unsupported memory type: %d\n", __func__, region->memType); - return -EINVAL; + rc = -EINVAL; + goto out; } } @@ -2313,9 +2320,10 @@ int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */ memMap->numRegionsUsed = 0; memMap->inUse = 0; +out: up(&memMap->lock); - return 0; + return rc; } EXPORT_SYMBOL(dma_unmap); diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index d15bece..df4ab21 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -22,6 +22,7 @@ #include <linux/leds.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/slab.h> #include <linux/mtd/nand.h> #include <linux/input.h> #include <linux/spi/spi.h> diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 27772e1..0d6ee58 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -758,7 +758,6 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = { [IRQ_MMCINT] = 7, [IRQ_DM365_MMCINT1] = 7, [IRQ_DM365_PWMINT3] = 7, - [IRQ_DDRINT] = 4, [IRQ_AEMIFINT] = 2, [IRQ_DM365_SDIOINT1] = 2, [IRQ_TINT0_TINT12] = 7, diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c index 15dd886..5313738 100644 --- a/arch/arm/mach-davinci/dma.c +++ b/arch/arm/mach-davinci/dma.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/edma.h> @@ -1266,7 +1267,8 @@ int edma_start(unsigned channel) /* EDMA channel with event association */ pr_debug("EDMA: ER%d %08x\n", j, edma_shadow0_read_array(ctlr, SH_ER, j)); - /* Clear any pending error */ + /* Clear any pending event or error */ + edma_write_array(ctlr, EDMA_ECR, j, mask); edma_write_array(ctlr, EDMA_EMCR, j, mask); /* Clear any SER */ edma_shadow0_write_array(ctlr, SH_SECR, j, mask); diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index cc9be7f..03acfd3 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -3,7 +3,7 @@ * * Author: Mark A. Greer <mgreer@mvista.com> * - * 2007, 2009 (c) MontaVista Software, Inc. This file is licensed under + * 2007, 2009-2010 (c) MontaVista Software, Inc. This file is licensed under * the terms of the GNU General Public License version 2. This program * is licensed "as is" without any warranty of any kind, whether express * or implied. @@ -13,7 +13,9 @@ #include <video/da8xx-fb.h> +#include <linux/platform_device.h> #include <linux/davinci_emac.h> + #include <mach/serial.h> #include <mach/edma.h> #include <mach/i2c.h> @@ -144,6 +146,10 @@ extern const short da850_mmcsd0_pins[]; extern const short da850_nand_pins[]; extern const short da850_nor_pins[]; +#ifdef CONFIG_DAVINCI_MUX int da8xx_pinmux_setup(const short pins[]); +#else +static inline int da8xx_pinmux_setup(const short pins[]) { return 0; } +#endif #endif /* __ASM_ARCH_DAVINCI_DA8XX_H */ diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c index 42d985b..9e0b106 100644 --- a/arch/arm/mach-davinci/time.c +++ b/arch/arm/mach-davinci/time.c @@ -253,8 +253,6 @@ static void __init timer_init(void) irq = USING_COMPARE(t) ? dtip[i].cmp_irq : irq; setup_irq(irq, &t->irqaction); } - - timer32_config(&timers[i]); } } @@ -331,6 +329,7 @@ static void __init davinci_timer_init(void) unsigned int clocksource_id; static char err[] __initdata = KERN_ERR "%s: can't register clocksource!\n"; + int i; clockevent_id = soc_info->timer_info->clockevent_id; clocksource_id = soc_info->timer_info->clocksource_id; @@ -389,6 +388,9 @@ static void __init davinci_timer_init(void) clockevent_davinci.cpumask = cpumask_of(0); clockevents_register_device(&clockevent_davinci); + + for (i=0; i< ARRAY_SIZE(timers); i++) + timer32_config(&timers[i]); } struct sys_timer davinci_timer = { diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c index cc377ae..cf547ad 100644 --- a/arch/arm/mach-ep93xx/gpio.c +++ b/arch/arm/mach-ep93xx/gpio.c @@ -25,7 +25,7 @@ #include <mach/hardware.h> /************************************************************************* - * GPIO handling for EP93xx + * Interrupt handling for EP93xx on-chip GPIOs *************************************************************************/ static unsigned char gpio_int_unmasked[3]; static unsigned char gpio_int_enabled[3]; @@ -40,7 +40,7 @@ static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; -void ep93xx_gpio_update_int_params(unsigned port) +static void ep93xx_gpio_update_int_params(unsigned port) { BUG_ON(port > 2); @@ -56,7 +56,7 @@ void ep93xx_gpio_update_int_params(unsigned port) EP93XX_GPIO_REG(int_en_register_offset[port])); } -void ep93xx_gpio_int_mask(unsigned line) +static inline void ep93xx_gpio_int_mask(unsigned line) { gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); } diff --git a/arch/arm/mach-h720x/common.c b/arch/arm/mach-h720x/common.c index 7a26148..bdb3f67 100644 --- a/arch/arm/mach-h720x/common.c +++ b/arch/arm/mach-h720x/common.c @@ -14,7 +14,6 @@ */ #include <linux/sched.h> -#include <linux/slab.h> #include <linux/mman.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index 44d4c2e..f77f202 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -13,7 +13,6 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/cpufreq.h> -#include <linux/slab.h> #include <linux/sched.h> #include <linux/smp.h> #include <linux/init.h> diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 0058c93..41b1072 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -21,6 +21,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 66ef86d..15e6cc5 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -13,7 +13,6 @@ #include <linux/list.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/slab.h> #include <linux/string.h> #include <linux/sysdev.h> #include <linux/amba/bus.h> @@ -21,6 +20,7 @@ #include <linux/amba/clcd.h> #include <linux/amba/mmci.h> #include <linux/io.h> +#include <linux/gfp.h> #include <asm/clkdev.h> #include <mach/clkdev.h> diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 148d25f..ffbd349 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -22,7 +22,6 @@ */ #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/slab.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/spinlock.h> diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 4873f26..6d5a908 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -18,6 +18,7 @@ */ #include <linux/pci.h> +#include <linux/slab.h> #include <linux/delay.h> #include <linux/jiffies.h> #include <asm/irq.h> diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index 93370a4..10384fc 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -19,7 +19,6 @@ #include <linux/pci.h> #include <linux/pm.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index a7a08dd..d6ac85f 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -21,7 +21,6 @@ #include <linux/pci.h> #include <linux/pm.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 0200f80..c6a0e4e 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -18,7 +18,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 2a5c6376..5d99039 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -23,7 +23,6 @@ #include <linux/pci.h> #include <linux/pm.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index 394e95a..c6ff552 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index a40badf..fbf55140 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/string.h> -#include <linux/slab.h> #include <linux/serial_core.h> #include <linux/serial_8250.h> #include <linux/mtd/physmap.h> diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index c84dfac..1a557e0 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -26,7 +26,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/serial.h> #include <linux/tty.h> diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index 4467c42..55e5c69 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index 94f68ba..237b61a 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp2000/ixdp2x00.c b/arch/arm/mach-ixp2000/ixdp2x00.c index 3045130..91fffb9 100644 --- a/arch/arm/mach-ixp2000/ixdp2x00.c +++ b/arch/arm/mach-ixp2000/ixdp2x00.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 4a12327..0369ec4 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -23,7 +23,6 @@ #include <linux/bitops.h> #include <linux/pci.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/serial.h> #include <linux/tty.h> diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index 60e9fd0..90771ca 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -22,7 +22,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h index 94a3a86..6ef65d8 100644 --- a/arch/arm/mach-ixp23xx/include/mach/memory.h +++ b/arch/arm/mach-ixp23xx/include/mach/memory.h @@ -19,7 +19,7 @@ */ #define PHYS_OFFSET (0x00000000) -#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)) +#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0) #define __phys_to_bus(x) ((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) #define __bus_to_phys(x) ((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET)) diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 59022be..4b0e598 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -23,7 +23,6 @@ #include <linux/mm.h> #include <linux/init.h> #include <linux/ioport.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/io.h> diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 6e558a7..d8bc86d 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -17,7 +17,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <linux/i2c-gpio.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 25bf5ad..31a47f6 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -14,7 +14,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 59b73a0..2583b2a 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -17,7 +17,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 0bc7185..c67586b 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -27,7 +27,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> #include <asm/memory.h> diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index bbb7689..827cbc4 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -14,7 +14,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <linux/i2c-gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index e8bb257..a17ed79 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -20,7 +20,6 @@ #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> -#include <linux/slab.h> #include <mach/npe.h> #define DEBUG_MSG 0 diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 7ea7820..4dd7486 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -18,7 +18,6 @@ #include <linux/serial.h> #include <linux/tty.h> #include <linux/serial_8250.h> -#include <linux/slab.h> #include <asm/types.h> #include <asm/setup.h> diff --git a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c index 0358f45..5e6f711 100644 --- a/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c +++ b/arch/arm/mach-kirkwood/mv88f6281gtw_ge-setup.c @@ -74,9 +74,9 @@ static struct gpio_keys_button mv88f6281gtw_ge_button_pins[] = { .desc = "SWR Button", .active_low = 1, }, { - .code = KEY_F1, + .code = KEY_WPS_BUTTON, .gpio = 46, - .desc = "WPS Button(F1)", + .desc = "WPS Button", .active_low = 1, }, }; diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index a604b2a..dee1eff 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -10,6 +10,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/slab.h> #include <linux/mbus.h> #include <asm/irq.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-lh7a40x/clcd.c b/arch/arm/mach-lh7a40x/clcd.c index c472b9e..7fe4fd3 100644 --- a/arch/arm/mach-lh7a40x/clcd.c +++ b/arch/arm/mach-lh7a40x/clcd.c @@ -10,6 +10,7 @@ */ #include <linux/init.h> +#include <linux/gfp.h> #include <linux/device.h> #include <linux/dma-mapping.h> #include <linux/sysdev.h> diff --git a/arch/arm/mach-mmp/include/mach/uncompress.h b/arch/arm/mach-mmp/include/mach/uncompress.h index a7dcc53..85bd8a2 100644 --- a/arch/arm/mach-mmp/include/mach/uncompress.h +++ b/arch/arm/mach-mmp/include/mach/uncompress.h @@ -14,7 +14,7 @@ #define UART2_BASE (APB_PHYS_BASE + 0x17000) #define UART3_BASE (APB_PHYS_BASE + 0x18000) -static volatile unsigned long *UART = (unsigned long *)UART2_BASE; +static volatile unsigned long *UART; static inline void putc(char c) { @@ -37,6 +37,9 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* default to UART2 */ + UART = (unsigned long *)UART2_BASE; + if (machine_is_avengers_lite()) UART = (unsigned long *)UART3_BASE; } diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig index 3872af1..170f68e 100644 --- a/arch/arm/mach-mx3/Kconfig +++ b/arch/arm/mach-mx3/Kconfig @@ -62,6 +62,15 @@ config MACH_MX31_3DS Include support for MX31PDK (3DS) platform. This includes specific configurations for the board and its peripherals. +config MACH_MX31_3DS_MXC_NAND_USE_BBT + bool "Make the MXC NAND driver use the in flash Bad Block Table" + depends on MACH_MX31_3DS + depends on MTD_NAND_MXC + help + Enable this if you want that the MXC NAND driver uses the in flash + Bad Block Table to know what blocks are bad instead of scanning the + entire flash looking for bad block markers. + config MACH_MX31MOBOARD bool "Support mx31moboard platforms (EPFL Mobots group)" select ARCH_MX31 @@ -95,6 +104,7 @@ config MACH_PCM043 config MACH_ARMADILLO5X0 bool "Support Atmark Armadillo-500 Development Base Board" select ARCH_MX31 + select MXC_ULPI if USB_ULPI help Include support for Atmark Armadillo-500 platform. This includes specific configurations for the board and its peripherals. diff --git a/arch/arm/mach-mx3/clock-imx31.c b/arch/arm/mach-mx3/clock-imx31.c index 80dba99..9a9eb6d 100644 --- a/arch/arm/mach-mx3/clock-imx31.c +++ b/arch/arm/mach-mx3/clock-imx31.c @@ -468,6 +468,7 @@ static struct clk ahb_clk = { } DEFINE_CLOCK(perclk_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); DEFINE_CLOCK(sdhc1_clk, 0, MXC_CCM_CGR0, 0, NULL, NULL, &perclk_clk); DEFINE_CLOCK(sdhc2_clk, 1, MXC_CCM_CGR0, 2, NULL, NULL, &perclk_clk); @@ -490,7 +491,7 @@ DEFINE_CLOCK(mpeg4_clk, 0, MXC_CCM_CGR1, 0, NULL, NULL, &ahb_clk); DEFINE_CLOCK(mstick1_clk, 0, MXC_CCM_CGR1, 2, mstick1_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK(mstick2_clk, 1, MXC_CCM_CGR1, 4, mstick2_get_rate, NULL, &usb_pll_clk); DEFINE_CLOCK1(csi_clk, 0, MXC_CCM_CGR1, 6, csi, NULL, &serial_pll_clk); -DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ipg_clk); +DEFINE_CLOCK(rtc_clk, 0, MXC_CCM_CGR1, 8, NULL, NULL, &ckil_clk); DEFINE_CLOCK(wdog_clk, 0, MXC_CCM_CGR1, 10, NULL, NULL, &ipg_clk); DEFINE_CLOCK(pwm_clk, 0, MXC_CCM_CGR1, 12, NULL, NULL, &perclk_clk); DEFINE_CLOCK(usb_clk2, 0, MXC_CCM_CGR1, 18, usb_get_rate, NULL, &ahb_clk); @@ -514,7 +515,6 @@ DEFINE_CLOCK(usb_clk1, 0, NULL, 0, usb_get_rate, NULL, &usb_pll_clk) DEFINE_CLOCK(nfc_clk, 0, NULL, 0, nfc_get_rate, NULL, &ahb_clk); DEFINE_CLOCK(scc_clk, 0, NULL, 0, NULL, NULL, &ipg_clk); DEFINE_CLOCK(ipg_clk, 0, NULL, 0, ipg_get_rate, NULL, &ahb_clk); -DEFINE_CLOCK(ckil_clk, 0, NULL, 0, clk_ckil_get_rate, NULL, NULL); #define _REGISTER_CLOCK(d, n, c) \ { \ @@ -572,7 +572,6 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "iim", iim_clk) _REGISTER_CLOCK(NULL, "mpeg4", mpeg4_clk) _REGISTER_CLOCK(NULL, "mbx", mbx_clk) - _REGISTER_CLOCK("mxc_rtc", NULL, ckil_clk) }; int __init mx31_clocks_init(unsigned long fref) diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c index 6adb586..f891115 100644 --- a/arch/arm/mach-mx3/devices.c +++ b/arch/arm/mach-mx3/devices.c @@ -575,11 +575,26 @@ struct platform_device imx_ssi_device1 = { .resource = imx_ssi_resources1, }; -static int mx3_devices_init(void) +static struct resource imx_wdt_resources[] = { + { + .flags = IORESOURCE_MEM, + }, +}; + +struct platform_device imx_wdt_device0 = { + .name = "imx-wdt", + .id = 0, + .num_resources = ARRAY_SIZE(imx_wdt_resources), + .resource = imx_wdt_resources, +}; + +static int __init mx3_devices_init(void) { if (cpu_is_mx31()) { mxc_nand_resources[0].start = MX31_NFC_BASE_ADDR; mxc_nand_resources[0].end = MX31_NFC_BASE_ADDR + 0xfff; + imx_wdt_resources[0].start = MX31_WDOG_BASE_ADDR; + imx_wdt_resources[0].end = MX31_WDOG_BASE_ADDR + 0x3fff; mxc_register_device(&mxc_rnga_device, NULL); } if (cpu_is_mx35()) { @@ -597,6 +612,8 @@ static int mx3_devices_init(void) imx_ssi_resources0[1].end = MX35_INT_SSI1; imx_ssi_resources1[1].start = MX35_INT_SSI2; imx_ssi_resources1[1].end = MX35_INT_SSI2; + imx_wdt_resources[0].start = MX35_WDOG_BASE_ADDR; + imx_wdt_resources[0].end = MX35_WDOG_BASE_ADDR + 0x3fff; } return 0; diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h index 42cf175..4f77eb5 100644 --- a/arch/arm/mach-mx3/devices.h +++ b/arch/arm/mach-mx3/devices.h @@ -25,4 +25,5 @@ extern struct platform_device mxc_spi_device1; extern struct platform_device mxc_spi_device2; extern struct platform_device imx_ssi_device0; extern struct platform_device imx_ssi_device1; - +extern struct platform_device imx_ssi_device1; +extern struct platform_device imx_wdt_device0; diff --git a/arch/arm/mach-mx3/mach-armadillo5x0.c b/arch/arm/mach-mx3/mach-armadillo5x0.c index 3d72b0b..5f72ec9 100644 --- a/arch/arm/mach-mx3/mach-armadillo5x0.c +++ b/arch/arm/mach-mx3/mach-armadillo5x0.c @@ -36,6 +36,9 @@ #include <linux/input.h> #include <linux/gpio_keys.h> #include <linux/i2c.h> +#include <linux/usb/otg.h> +#include <linux/usb/ulpi.h> +#include <linux/delay.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -52,6 +55,8 @@ #include <mach/ipu.h> #include <mach/mx3fb.h> #include <mach/mxc_nand.h> +#include <mach/mxc_ehci.h> +#include <mach/ulpi.h> #include "devices.h" #include "crm_regs.h" @@ -103,8 +108,158 @@ static int armadillo5x0_pins[] = { /* I2C2 */ MX31_PIN_CSPI2_MOSI__SCL, MX31_PIN_CSPI2_MISO__SDA, + /* OTG */ + MX31_PIN_USBOTG_DATA0__USBOTG_DATA0, + MX31_PIN_USBOTG_DATA1__USBOTG_DATA1, + MX31_PIN_USBOTG_DATA2__USBOTG_DATA2, + MX31_PIN_USBOTG_DATA3__USBOTG_DATA3, + MX31_PIN_USBOTG_DATA4__USBOTG_DATA4, + MX31_PIN_USBOTG_DATA5__USBOTG_DATA5, + MX31_PIN_USBOTG_DATA6__USBOTG_DATA6, + MX31_PIN_USBOTG_DATA7__USBOTG_DATA7, + MX31_PIN_USBOTG_CLK__USBOTG_CLK, + MX31_PIN_USBOTG_DIR__USBOTG_DIR, + MX31_PIN_USBOTG_NXT__USBOTG_NXT, + MX31_PIN_USBOTG_STP__USBOTG_STP, + /* USB host 2 */ + IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC), + IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC), }; +/* USB */ +#if defined(CONFIG_USB_ULPI) + +#define OTG_RESET IOMUX_TO_GPIO(MX31_PIN_STXD4) +#define USBH2_RESET IOMUX_TO_GPIO(MX31_PIN_SCK6) +#define USBH2_CS IOMUX_TO_GPIO(MX31_PIN_GPIO1_3) + +#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \ + PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU) + +static int usbotg_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA2, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA4, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA5, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DATA7, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBOTG_STP, USB_PAD_CFG); + + /* Chip already enabled by hardware */ + /* OTG phy reset*/ + err = gpio_request(OTG_RESET, "USB-OTG-RESET"); + if (err) { + pr_err("Failed to request the usb otg reset gpio\n"); + return err; + } + + err = gpio_direction_output(OTG_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb otg phy\n"); + goto otg_free_reset; + } + + gpio_set_value(OTG_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(OTG_RESET, 1/*HIGH*/); + + return 0; + +otg_free_reset: + gpio_free(OTG_RESET); + return err; +} + +static int usbh2_init(struct platform_device *pdev) +{ + int err; + + mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG); + mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG); + + mxc_iomux_set_gpr(MUX_PGP_UH2, true); + + + /* Enable the chip */ + err = gpio_request(USBH2_CS, "USB-H2-CS"); + if (err) { + pr_err("Failed to request the usb host 2 CS gpio\n"); + return err; + } + + err = gpio_direction_output(USBH2_CS, 0/*Enabled*/); + if (err) { + pr_err("Failed to drive the usb host 2 CS gpio\n"); + goto h2_free_cs; + } + + /* H2 phy reset*/ + err = gpio_request(USBH2_RESET, "USB-H2-RESET"); + if (err) { + pr_err("Failed to request the usb host 2 reset gpio\n"); + goto h2_free_cs; + } + + err = gpio_direction_output(USBH2_RESET, 1/*HIGH*/); + if (err) { + pr_err("Failed to reset the usb host 2 phy\n"); + goto h2_free_reset; + } + + gpio_set_value(USBH2_RESET, 0/*LOW*/); + mdelay(5); + gpio_set_value(USBH2_RESET, 1/*HIGH*/); + + return 0; + +h2_free_reset: + gpio_free(USBH2_RESET); +h2_free_cs: + gpio_free(USBH2_CS); + return err; +} + +static struct mxc_usbh_platform_data usbotg_pdata = { + .init = usbotg_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; + +static struct mxc_usbh_platform_data usbh2_pdata = { + .init = usbh2_init, + .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, + .flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI, +}; +#endif /* CONFIG_USB_ULPI */ + /* RTC over I2C*/ #define ARMADILLO5X0_RTC_GPIO IOMUX_TO_GPIO(MX31_PIN_SRXD4) @@ -393,6 +548,17 @@ static void __init armadillo5x0_init(void) if (armadillo5x0_i2c_rtc.irq == 0) pr_warning("armadillo5x0_init: failed to get RTC IRQ\n"); i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1); + + /* USB */ +#if defined(CONFIG_USB_ULPI) + usbotg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops, + USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT); + + mxc_register_device(&mxc_otg_host, &usbotg_pdata); + mxc_register_device(&mxc_usbh2, &usbh2_pdata); +#endif } static void __init armadillo5x0_timer_init(void) diff --git a/arch/arm/mach-mx3/mach-mx31_3ds.c b/arch/arm/mach-mx3/mach-mx31_3ds.c index b88c18a..f54af1e 100644 --- a/arch/arm/mach-mx3/mach-mx31_3ds.c +++ b/arch/arm/mach-mx3/mach-mx31_3ds.c @@ -23,6 +23,9 @@ #include <linux/gpio.h> #include <linux/smsc911x.h> #include <linux/platform_device.h> +#include <linux/mfd/mc13783.h> +#include <linux/spi/spi.h> +#include <linux/regulator/machine.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -31,26 +34,96 @@ #include <asm/memory.h> #include <asm/mach/map.h> #include <mach/common.h> -#include <mach/board-mx31pdk.h> +#include <mach/board-mx31_3ds.h> #include <mach/imx-uart.h> #include <mach/iomux-mx3.h> +#include <mach/mxc_nand.h> +#include <mach/spi.h> #include "devices.h" /*! - * @file mx31pdk.c + * @file mx31_3ds.c * * @brief This file contains the board-specific initialization routines. * * @ingroup System */ -static int mx31pdk_pins[] = { +static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1, MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), + /* SPI 1 */ + MX31_PIN_CSPI2_SCLK__SCLK, + MX31_PIN_CSPI2_MOSI__MOSI, + MX31_PIN_CSPI2_MISO__MISO, + MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, + MX31_PIN_CSPI2_SS0__SS0, + MX31_PIN_CSPI2_SS2__SS2, /*CS for MC13783 */ + /* MC13783 IRQ */ + IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO), +}; + +/* Regulators */ +static struct regulator_init_data pwgtx_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + }, +}; + +static struct mc13783_regulator_init_data mx31_3ds_regulators[] = { + { + .id = MC13783_REGU_PWGT1SPI, /* Power Gate for ARM core. */ + .init_data = &pwgtx_init, + }, { + .id = MC13783_REGU_PWGT2SPI, /* Power Gate for L2 Cache. */ + .init_data = &pwgtx_init, + }, +}; + +/* MC13783 */ +static struct mc13783_platform_data mc13783_pdata __initdata = { + .regulators = mx31_3ds_regulators, + .num_regulators = ARRAY_SIZE(mx31_3ds_regulators), + .flags = MC13783_USE_REGULATOR, +}; + +/* SPI */ +static int spi1_internal_chipselect[] = { + MXC_SPI_CS(0), + MXC_SPI_CS(2), +}; + +static struct spi_imx_master spi1_pdata = { + .chipselect = spi1_internal_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_internal_chipselect), +}; + +static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { + { + .modalias = "mc13783", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 1, /* SS2 */ + .platform_data = &mc13783_pdata, + .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + .mode = SPI_CS_HIGH, + }, +}; + +/* + * NAND Flash + */ +static struct mxc_nand_platform_data imx31_3ds_nand_flash_pdata = { + .width = 1, + .hw_ecc = 1, +#ifdef MACH_MX31_3DS_MXC_NAND_USE_BBT + .flash_bbt = 1, +#endif }; static struct imxuart_platform_data uart_pdata = { @@ -95,7 +168,7 @@ static struct platform_device smsc911x_device = { * LEDs, switches, interrupts for Ethernet. */ -static void mx31pdk_expio_irq_handler(uint32_t irq, struct irq_desc *desc) +static void mx31_3ds_expio_irq_handler(uint32_t irq, struct irq_desc *desc) { uint32_t imr_val; uint32_t int_valid; @@ -163,7 +236,7 @@ static struct irq_chip expio_irq_chip = { .unmask = expio_unmask_irq, }; -static int __init mx31pdk_init_expio(void) +static int __init mx31_3ds_init_expio(void) { int i; int ret; @@ -176,7 +249,7 @@ static int __init mx31pdk_init_expio(void) return -ENODEV; } - pr_info("i.MX31PDK Debug board detected, rev = 0x%04X\n", + pr_info("i.MX31 3DS Debug board detected, rev = 0x%04X\n", __raw_readw(CPLD_CODE_VER_REG)); /* @@ -201,7 +274,7 @@ static int __init mx31pdk_init_expio(void) set_irq_flags(i, IRQF_VALID); } set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_LOW); - set_irq_chained_handler(EXPIO_PARENT_INT, mx31pdk_expio_irq_handler); + set_irq_chained_handler(EXPIO_PARENT_INT, mx31_3ds_expio_irq_handler); return 0; } @@ -209,7 +282,7 @@ static int __init mx31pdk_init_expio(void) /* * This structure defines the MX31 memory map. */ -static struct map_desc mx31pdk_io_desc[] __initdata = { +static struct map_desc mx31_3ds_io_desc[] __initdata = { { .virtual = MX31_CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), @@ -221,10 +294,10 @@ static struct map_desc mx31pdk_io_desc[] __initdata = { /* * Set up static virtual mappings. */ -static void __init mx31pdk_map_io(void) +static void __init mx31_3ds_map_io(void) { mx31_map_io(); - iotable_init(mx31pdk_io_desc, ARRAY_SIZE(mx31pdk_io_desc)); + iotable_init(mx31_3ds_io_desc, ARRAY_SIZE(mx31_3ds_io_desc)); } /*! @@ -232,35 +305,40 @@ static void __init mx31pdk_map_io(void) */ static void __init mxc_board_init(void) { - mxc_iomux_setup_multiple_pins(mx31pdk_pins, ARRAY_SIZE(mx31pdk_pins), - "mx31pdk"); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), + "mx31_3ds"); mxc_register_device(&mxc_uart_device0, &uart_pdata); + mxc_register_device(&mxc_nand_device, &imx31_3ds_nand_flash_pdata); + + mxc_register_device(&mxc_spi_device1, &spi1_pdata); + spi_register_board_info(mx31_3ds_spi_devs, + ARRAY_SIZE(mx31_3ds_spi_devs)); - if (!mx31pdk_init_expio()) + if (!mx31_3ds_init_expio()) platform_device_register(&smsc911x_device); } -static void __init mx31pdk_timer_init(void) +static void __init mx31_3ds_timer_init(void) { mx31_clocks_init(26000000); } -static struct sys_timer mx31pdk_timer = { - .init = mx31pdk_timer_init, +static struct sys_timer mx31_3ds_timer = { + .init = mx31_3ds_timer_init, }; /* * The following uses standard kernel macros defined in arch.h in order to - * initialize __mach_desc_MX31PDK data structure. + * initialize __mach_desc_MX31_3DS data structure. */ MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)") /* Maintainer: Freescale Semiconductor, Inc. */ .phys_io = MX31_AIPS1_BASE_ADDR, .io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc, .boot_params = MX3x_PHYS_OFFSET + 0x100, - .map_io = mx31pdk_map_io, + .map_io = mx31_3ds_map_io, .init_irq = mx31_init_irq, .init_machine = mxc_board_init, - .timer = &mx31pdk_timer, + .timer = &mx31_3ds_timer, MACHINE_END diff --git a/arch/arm/mach-mx3/mach-mx31moboard.c b/arch/arm/mach-mx3/mach-mx31moboard.c index a7dc519..fccb920 100644 --- a/arch/arm/mach-mx3/mach-mx31moboard.c +++ b/arch/arm/mach-mx3/mach-mx31moboard.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/fsl_devices.h> +#include <linux/gfp.h> #include <linux/gpio.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-mx3/mach-pcm037.c b/arch/arm/mach-mx3/mach-pcm037.c index 11f5315..2df1ec5 100644 --- a/arch/arm/mach-mx3/mach-pcm037.c +++ b/arch/arm/mach-mx3/mach-pcm037.c @@ -35,7 +35,7 @@ #include <linux/can/platform/sja1000.h> #include <linux/usb/otg.h> #include <linux/usb/ulpi.h> -#include <linux/fsl_devices.h> +#include <linux/gfp.h> #include <media/soc_camera.h> diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c index ccd8742..093c595 100644 --- a/arch/arm/mach-mx3/mx31lite-db.c +++ b/arch/arm/mach-mx3/mx31lite-db.c @@ -28,7 +28,6 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/platform_device.h> #include <linux/leds.h> #include <linux/platform_device.h> @@ -206,5 +205,6 @@ void __init mx31lite_db_init(void) mxc_register_device(&mxcsdhc_device0, &mmc_pdata); mxc_register_device(&mxc_spi_device0, &spi0_pdata); platform_device_register(&litekit_led_device); + mxc_register_device(&imx_wdt_device0, NULL); } diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c index 9fbad2e..11b906c 100644 --- a/arch/arm/mach-mx3/mx31moboard-devboard.c +++ b/arch/arm/mach-mx3/mx31moboard-devboard.c @@ -20,6 +20,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/types.h> #include <linux/usb/otg.h> diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c index 3958515..ffb105e 100644 --- a/arch/arm/mach-mx3/mx31moboard-marxbot.c +++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c @@ -22,6 +22,7 @@ #include <linux/interrupt.h> #include <linux/i2c.h> #include <linux/spi/spi.h> +#include <linux/slab.h> #include <linux/platform_device.h> #include <linux/types.h> diff --git a/arch/arm/mach-mx5/clock-mx51.c b/arch/arm/mach-mx5/clock-mx51.c index be90c03..8f85f73 100644 --- a/arch/arm/mach-mx5/clock-mx51.c +++ b/arch/arm/mach-mx5/clock-mx51.c @@ -757,7 +757,7 @@ DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, /* GPT */ DEFINE_CLOCK(gpt_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_perclk, NULL); + NULL, NULL, &ipg_clk, NULL); DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, NULL, NULL, &ipg_clk, NULL); diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-mx5/cpu.c index 41c769f..2d37785 100644 --- a/arch/arm/mach-mx5/cpu.c +++ b/arch/arm/mach-mx5/cpu.c @@ -14,9 +14,62 @@ #include <linux/types.h> #include <linux/kernel.h> #include <linux/init.h> +#include <linux/module.h> #include <mach/hardware.h> #include <asm/io.h> +static int cpu_silicon_rev = -1; + +#define SI_REV 0x48 + +static void query_silicon_parameter(void) +{ + void __iomem *rom = ioremap(MX51_IROM_BASE_ADDR, MX51_IROM_SIZE); + u32 rev; + + if (!rom) { + cpu_silicon_rev = -EINVAL; + return; + } + + rev = readl(rom + SI_REV); + switch (rev) { + case 0x1: + cpu_silicon_rev = MX51_CHIP_REV_1_0; + break; + case 0x2: + cpu_silicon_rev = MX51_CHIP_REV_1_1; + break; + case 0x10: + cpu_silicon_rev = MX51_CHIP_REV_2_0; + break; + case 0x20: + cpu_silicon_rev = MX51_CHIP_REV_3_0; + break; + default: + cpu_silicon_rev = 0; + } + + iounmap(rom); +} + +/* + * Returns: + * the silicon revision of the cpu + * -EINVAL - not a mx51 + */ +int mx51_revision(void) +{ + if (!cpu_is_mx51()) + return -EINVAL; + + if (cpu_silicon_rev == -1) + query_silicon_parameter(); + + return cpu_silicon_rev; +} +EXPORT_SYMBOL(mx51_revision); + static int __init post_cpu_init(void) { unsigned int reg; diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index c21e18b..b7677ef 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -35,11 +35,6 @@ static struct map_desc mxc_io_desc[] __initdata = { .length = MX51_DEBUG_SIZE, .type = MT_DEVICE }, { - .virtual = MX51_TZIC_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_TZIC_BASE_ADDR), - .length = MX51_TZIC_SIZE, - .type = MT_DEVICE - }, { .virtual = MX51_AIPS1_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX51_AIPS1_BASE_ADDR), .length = MX51_AIPS1_SIZE, @@ -54,11 +49,6 @@ static struct map_desc mxc_io_desc[] __initdata = { .pfn = __phys_to_pfn(MX51_AIPS2_BASE_ADDR), .length = MX51_AIPS2_SIZE, .type = MT_DEVICE - }, { - .virtual = MX51_NFC_AXI_BASE_ADDR_VIRT, - .pfn = __phys_to_pfn(MX51_NFC_AXI_BASE_ADDR), - .length = MX51_NFC_AXI_SIZE, - .type = MT_DEVICE }, }; @@ -69,14 +59,6 @@ static struct map_desc mxc_io_desc[] __initdata = { */ void __init mx51_map_io(void) { - u32 tzic_addr; - - if (mx51_revision() < MX51_CHIP_REV_2_0) - tzic_addr = 0x8FFFC000; - else - tzic_addr = 0xE0003000; - mxc_io_desc[2].pfn = __phys_to_pfn(tzic_addr); - mxc_set_cpu_type(MXC_CPU_MX51); mxc_iomux_v3_init(MX51_IO_ADDRESS(MX51_IOMUXC_BASE_ADDR)); mxc_arch_reset_init(MX51_IO_ADDRESS(MX51_WDOG_BASE_ADDR)); @@ -85,5 +67,17 @@ void __init mx51_map_io(void) void __init mx51_init_irq(void) { - tzic_init_irq(MX51_IO_ADDRESS(MX51_TZIC_BASE_ADDR)); + unsigned long tzic_addr; + void __iomem *tzic_virt; + + if (mx51_revision() < MX51_CHIP_REV_2_0) + tzic_addr = MX51_TZIC_BASE_ADDR_TO1; + else + tzic_addr = MX51_TZIC_BASE_ADDR; + + tzic_virt = ioremap(tzic_addr, SZ_16K); + if (!tzic_virt) + panic("unable to map TZIC interrupt controller\n"); + + tzic_init_irq(tzic_virt); } diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 1d844e2..5b84bcd 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -23,6 +23,7 @@ #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/err.h> +#include <linux/gfp.h> #include <asm/irq.h> diff --git a/arch/arm/mach-netx/xc.c b/arch/arm/mach-netx/xc.c index 181a78b..f009b54 100644 --- a/arch/arm/mach-netx/xc.c +++ b/arch/arm/mach-netx/xc.c @@ -21,6 +21,7 @@ #include <linux/device.h> #include <linux/firmware.h> #include <linux/mutex.h> +#include <linux/slab.h> #include <linux/io.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-nomadik/gpio.c b/arch/arm/mach-nomadik/gpio.c index 9a09b27..66b1c91 100644 --- a/arch/arm/mach-nomadik/gpio.c +++ b/arch/arm/mach-nomadik/gpio.c @@ -19,6 +19,7 @@ #include <linux/spinlock.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <mach/gpio.h> diff --git a/arch/arm/mach-ns9xxx/plat-serial8250.c b/arch/arm/mach-ns9xxx/plat-serial8250.c index 795b15e..463e924 100644 --- a/arch/arm/mach-ns9xxx/plat-serial8250.c +++ b/arch/arm/mach-ns9xxx/plat-serial8250.c @@ -10,6 +10,7 @@ */ #include <linux/platform_device.h> #include <linux/serial_8250.h> +#include <linux/slab.h> #include <mach/regs-board-a9m9750dev.h> #include <mach/board.h> diff --git a/arch/arm/mach-ns9xxx/processor-ns9360.c b/arch/arm/mach-ns9xxx/processor-ns9360.c index abee833..aed1999 100644 --- a/arch/arm/mach-ns9xxx/processor-ns9360.c +++ b/arch/arm/mach-ns9xxx/processor-ns9360.c @@ -10,7 +10,6 @@ */ #include <linux/io.h> #include <linux/kernel.h> -#include <linux/slab.h> #include <asm/page.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index f9a5cf7..e9bdff1 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <mach/irqs.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 3b1eac4..e60ca4e 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -31,6 +31,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/cpufreq.h> +#include <linux/slab.h> #include <plat/clock.h> #include <plat/sram.h> diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index 6f4b7cc..4f63dc6 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -15,6 +15,7 @@ #include <linux/device.h> #include <linux/jiffies.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/stringify.h> #include <plat/iommu.h> diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index be8fce3..2f3cad6 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -16,6 +16,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <mach/irqs.h> #include <plat/dma.h> diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index b4ca84e..8b3d269 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/init.h> #include <linux/io.h> +#include <linux/slab.h> #include <linux/spinlock.h> #include <linux/list.h> #include <linux/ctype.h> diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index c18f7f2..6cac981 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/module.h> +#include <linux/slab.h> #include <plat/clock.h> #include <plat/board.h> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index fee2efb..ea0000b 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -27,6 +27,7 @@ #include <linux/gpio.h> #include <linux/clk.h> #include <linux/delay.h> +#include <linux/slab.h> #include <plat/sram.h> #include <plat/clockdomain.h> diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index bdf96eb..e8706f1 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -12,6 +12,7 @@ #include <linux/kernel.h> #include <linux/pci.h> +#include <linux/slab.h> #include <linux/mbus.h> #include <asm/irq.h> #include <asm/mach/pci.h> diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index cb0feca..f9f222e 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -77,7 +77,7 @@ static struct gpio_keys_button wrt350n_v2_buttons[] = { .desc = "Reset Button", .active_low = 1, }, { - .code = KEY_WLAN, + .code = KEY_WPS_BUTTON, .gpio = 2, .desc = "WPS Button", .active_low = 1, diff --git a/arch/arm/mach-pnx4008/dma.c b/arch/arm/mach-pnx4008/dma.c index 425f718..7fa4bf2 100644 --- a/arch/arm/mach-pnx4008/dma.c +++ b/arch/arm/mach-pnx4008/dma.c @@ -22,6 +22,7 @@ #include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/gfp.h> #include <asm/system.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pnx4008/pm.c b/arch/arm/mach-pnx4008/pm.c index 1f05853..ee3c29c 100644 --- a/arch/arm/mach-pnx4008/pm.c +++ b/arch/arm/mach-pnx4008/pm.c @@ -19,6 +19,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 38fbd0a..5b6ee46 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -272,7 +272,6 @@ config MACH_H5000 config MACH_HIMALAYA bool "HTC Himalaya Support" select CPU_PXA26x - select FB_W100 config MACH_MAGICIAN bool "Enable HTC Magician Support" @@ -454,6 +453,13 @@ config PXA_SHARPSL config SHARPSL_PM bool select APM_EMULATION + select SHARPSL_PM_MAX1111 + +config SHARPSL_PM_MAX1111 + bool + depends on !CORGI_SSP_DEPRECATED + select HWMON + select SENSORS_MAX1111 config CORGI_SSP_DEPRECATED bool @@ -547,7 +553,6 @@ config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. @@ -556,7 +561,6 @@ config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. @@ -573,7 +577,6 @@ config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES - select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. diff --git a/arch/arm/mach-pxa/corgi_ssp.c b/arch/arm/mach-pxa/corgi_ssp.c index 1d9bc11..9347254 100644 --- a/arch/arm/mach-pxa/corgi_ssp.c +++ b/arch/arm/mach-pxa/corgi_ssp.c @@ -13,7 +13,6 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/sched.h> -#include <linux/slab.h> #include <linux/delay.h> #include <linux/platform_device.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-pxa/cpufreq-pxa3xx.c b/arch/arm/mach-pxa/cpufreq-pxa3xx.c index 149cdd9..27fa329 100644 --- a/arch/arm/mach-pxa/cpufreq-pxa3xx.c +++ b/arch/arm/mach-pxa/cpufreq-pxa3xx.c @@ -14,6 +14,7 @@ #include <linux/sched.h> #include <linux/init.h> #include <linux/cpufreq.h> +#include <linux/slab.h> #include <mach/pxa3xx-regs.h> diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c index b2f878b..5161dca 100644 --- a/arch/arm/mach-pxa/imote2.c +++ b/arch/arm/mach-pxa/imote2.c @@ -559,10 +559,6 @@ static void __init imote2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* SPI chip select directions - all other directions should - * be handled by drivers.*/ - gpio_direction_output(37, 0); - platform_add_devices(imote2_devices, ARRAY_SIZE(imote2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); diff --git a/arch/arm/mach-pxa/include/mach/uncompress.h b/arch/arm/mach-pxa/include/mach/uncompress.h index 5ef91d9..759b851 100644 --- a/arch/arm/mach-pxa/include/mach/uncompress.h +++ b/arch/arm/mach-pxa/include/mach/uncompress.h @@ -16,9 +16,9 @@ #define BTUART_BASE (0x40200000) #define STUART_BASE (0x40700000) -static unsigned long uart_base = FFUART_BASE; -static unsigned int uart_shift = 2; -static unsigned int uart_is_pxa = 1; +static unsigned long uart_base; +static unsigned int uart_shift; +static unsigned int uart_is_pxa; static inline unsigned char uart_read(int offset) { @@ -56,6 +56,11 @@ static inline void flush(void) static inline void arch_decomp_setup(void) { + /* initialize to default */ + uart_base = FFUART_BASE; + uart_shift = 2; + uart_is_pxa = 1; + if (machine_is_littleton() || machine_is_intelmote2() || machine_is_csb726() || machine_is_stargate2() || machine_is_cm_x300() || machine_is_balloon3()) diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 843fcca..7a50ed8 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -38,6 +38,7 @@ #include <linux/mtd/physmap.h> #include <linux/usb/gpio_vbus.h> #include <linux/regulator/max1586.h> +#include <linux/slab.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 7693355..166c15f 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/suspend.h> #include <linux/errno.h> +#include <linux/slab.h> #include <mach/pm.h> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 3184bdc..44bb675 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -37,8 +37,6 @@ #include <linux/lis3lv02d.h> #include <linux/pda_power.h> #include <linux/power_supply.h> -#include <linux/pda_power.h> -#include <linux/power_supply.h> #include <linux/regulator/max8660.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -444,7 +442,7 @@ static struct gpio_keys_button gpio_keys_button[] = { .active_low = 0, .wakeup = 0, .debounce_interval = 5, /* ms */ - .desc = "on/off button", + .desc = "on_off button", }, }; diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index a98a434..2041eb1 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -764,11 +764,6 @@ static void __init stargate2_init(void) pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - /* spi chip selects */ - gpio_direction_output(37, 0); - gpio_direction_output(24, 0); - gpio_direction_output(39, 0); - platform_add_devices(ARRAY_AND_SIZE(stargate2_devices)); pxa2xx_set_spi_info(1, &pxa_ssp_master_0_info); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 1dd1334..9e0c5c3 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -27,6 +27,7 @@ #include <linux/delay.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/major.h> #include <linux/module.h> diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c index 90bd4ef..f2dbce5 100644 --- a/arch/arm/mach-realview/core.c +++ b/arch/arm/mach-realview/core.c @@ -31,6 +31,7 @@ #include <linux/smsc911x.h> #include <linux/ata_platform.h> #include <linux/amba/mmci.h> +#include <linux/gfp.h> #include <asm/clkdev.h> #include <asm/system.h> diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index c47d974..85883b2 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -9,7 +9,6 @@ * * DMA functions specific to RiscPC architecture */ -#include <linux/slab.h> #include <linux/mman.h> #include <linux/init.h> #include <linux/interrupt.h> diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index b62bdf1..33ccf7b 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -18,6 +18,7 @@ #include <linux/dmapool.h> #include <linux/sysdev.h> #include <linux/errno.h> +#include <linux/slab.h> #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index 9b6dee5..9d490c6 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -18,7 +18,6 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/sched.h> -#include <linux/slab.h> #include <mach/hardware.h> #include <mach/jornada720.h> diff --git a/arch/arm/mach-sa1100/neponset.c b/arch/arm/mach-sa1100/neponset.c index 0b505d9..c601a75 100644 --- a/arch/arm/mach-sa1100/neponset.c +++ b/arch/arm/mach-sa1100/neponset.c @@ -8,7 +8,6 @@ #include <linux/ioport.h> #include <linux/serial_core.h> #include <linux/platform_device.h> -#include <linux/slab.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-u300/dummyspichip.c b/arch/arm/mach-u300/dummyspichip.c index 962f9de..5f55012 100644 --- a/arch/arm/mach-u300/dummyspichip.c +++ b/arch/arm/mach-u300/dummyspichip.c @@ -15,6 +15,7 @@ #include <linux/mutex.h> #include <linux/spi/spi.h> #include <linux/dma-mapping.h> +#include <linux/slab.h> /* * WARNING! Do not include this pl022-specific controller header * for any generic driver. It is only done in this dummy chip diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c index 109f5a6..77fbb1e 100644 --- a/arch/arm/mach-u300/mmc.c +++ b/arch/arm/mach-u300/mmc.c @@ -20,6 +20,7 @@ #include <linux/regulator/machine.h> #include <linux/gpio.h> #include <linux/amba/mmci.h> +#include <linux/slab.h> #include "mmc.h" #include "padmux.h" diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 9ddb49b..3b1a4ee 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -32,6 +32,7 @@ #include <linux/clockchips.h> #include <linux/cnt32_to_63.h> #include <linux/io.h> +#include <linux/gfp.h> #include <asm/clkdev.h> #include <asm/system.h> diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 7161ba2..334f0df 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -16,7 +16,6 @@ */ #include <linux/kernel.h> #include <linux/pci.h> -#include <linux/slab.h> #include <linux/ioport.h> #include <linux/interrupt.h> #include <linux/spinlock.h> diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c index 4887612..e2958eb 100644 --- a/arch/arm/mach-w90x900/dev.c +++ b/arch/arm/mach-w90x900/dev.c @@ -18,6 +18,7 @@ #include <linux/timer.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/mtd/physmap.h> #include <linux/mtd/mtd.h> diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index c4ed9f9..5bd7c89 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -736,6 +736,12 @@ config NEEDS_SYSCALL_FOR_CMPXCHG config OUTER_CACHE bool +config OUTER_CACHE_SYNC + bool + help + The outer cache has a outer_cache_fns.sync function pointer + that can be used to drain the write buffer of the outer cache. + config CACHE_FEROCEON_L2 bool "Enable the Feroceon L2 cache controller" depends on ARCH_KIRKWOOD || ARCH_MV78XX0 @@ -757,6 +763,7 @@ config CACHE_L2X0 REALVIEW_EB_A9MP || ARCH_MX35 || ARCH_MX31 || MACH_REALVIEW_PBX || ARCH_NOMADIK || ARCH_OMAP4 default y select OUTER_CACHE + select OUTER_CACHE_SYNC help This option enables the L2x0 PrimeCell. @@ -781,3 +788,9 @@ config ARM_L1_CACHE_SHIFT int default 6 if ARM_L1_CACHE_SHIFT_6 default 5 + +config ARCH_HAS_BARRIERS + bool + help + This option allows the use of custom mandatory barriers + included via the mach/barriers.h file. diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 0733463..21ad68b 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -93,6 +93,15 @@ static inline void l2x0_flush_line(unsigned long addr) } #endif +static void l2x0_cache_sync(void) +{ + unsigned long flags; + + spin_lock_irqsave(&l2x0_lock, flags); + cache_sync(); + spin_unlock_irqrestore(&l2x0_lock, flags); +} + static inline void l2x0_inv_all(void) { unsigned long flags; @@ -225,6 +234,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) outer_cache.inv_range = l2x0_inv_range; outer_cache.clean_range = l2x0_clean_range; outer_cache.flush_range = l2x0_flush_range; + outer_cache.sync = l2x0_cache_sync; printk(KERN_INFO "L2X0 cache controller enabled\n"); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0da7ecc..1351edc 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -11,7 +11,7 @@ */ #include <linux/module.h> #include <linux/mm.h> -#include <linux/slab.h> +#include <linux/gfp.h> #include <linux/errno.h> #include <linux/list.h> #include <linux/init.h> diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c index c9b97e9..0d414c2 100644 --- a/arch/arm/mm/fault-armv.c +++ b/arch/arm/mm/fault-armv.c @@ -16,6 +16,7 @@ #include <linux/vmalloc.h> #include <linux/init.h> #include <linux/pagemap.h> +#include <linux/gfp.h> #include <asm/bugs.h> #include <asm/cacheflush.h> diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 7829cb5..83db12a 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -17,6 +17,7 @@ #include <linux/initrd.h> #include <linux/sort.h> #include <linux/highmem.h> +#include <linux/gfp.h> #include <asm/mach-types.h> #include <asm/sections.h> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 9d4da6a..4223d08 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -420,6 +420,10 @@ static void __init build_mem_type_table(void) user_pgprot |= L_PTE_SHARED; kern_pgprot |= L_PTE_SHARED; vecs_pgprot |= L_PTE_SHARED; + mem_types[MT_DEVICE_WC].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_WC].prot_pte |= L_PTE_SHARED; + mem_types[MT_DEVICE_CACHED].prot_sect |= PMD_SECT_S; + mem_types[MT_DEVICE_CACHED].prot_pte |= L_PTE_SHARED; mem_types[MT_MEMORY].prot_sect |= PMD_SECT_S; mem_types[MT_MEMORY_NONCACHED].prot_sect |= PMD_SECT_S; #endif diff --git a/arch/arm/mm/pgd.c b/arch/arm/mm/pgd.c index 2690146..be5f58e 100644 --- a/arch/arm/mm/pgd.c +++ b/arch/arm/mm/pgd.c @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ #include <linux/mm.h> +#include <linux/gfp.h> #include <linux/highmem.h> #include <asm/pgalloc.h> diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c index d983cd6..0c2cc5c 100644 --- a/arch/arm/plat-mxc/audmux-v2.c +++ b/arch/arm/plat-mxc/audmux-v2.c @@ -24,6 +24,7 @@ #include <linux/io.h> #include <linux/clk.h> #include <linux/debugfs.h> +#include <linux/slab.h> #include <mach/audmux.h> #include <mach/hardware.h> diff --git a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h index 2bbd6ed..da92933 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx31pdk.h +++ b/arch/arm/plat-mxc/include/mach/board-mx31_3ds.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_MXC_BOARD_MX31PDK_H__ -#define __ASM_ARCH_MXC_BOARD_MX31PDK_H__ +#ifndef __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ +#define __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ /* Definitions for components on the Debug board */ @@ -56,4 +56,4 @@ #define MXC_MAX_EXP_IO_LINES 16 -#endif /* __ASM_ARCH_MXC_BOARD_MX31PDK_H__ */ +#endif /* __ASM_ARCH_MXC_BOARD_MX31_3DS_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mx51.h b/arch/arm/plat-mxc/include/mach/mx51.h index 771532b..5aad344 100644 --- a/arch/arm/plat-mxc/include/mach/mx51.h +++ b/arch/arm/plat-mxc/include/mach/mx51.h @@ -14,7 +14,7 @@ * FB100000 70000000 1M SPBA 0 * FB000000 73F00000 1M AIPS 1 * FB200000 83F00000 1M AIPS 2 - * FA100000 8FFFC000 16K TZIC (interrupt controller) + * 8FFFC000 16K TZIC (interrupt controller) * 90000000 256M CSD0 SDRAM/DDR * A0000000 256M CSD1 SDRAM/DDR * B0000000 128M CS0 Flash @@ -23,11 +23,17 @@ * C8000000 64M CS3 Flash * CC000000 32M CS4 SRAM * CE000000 32M CS5 SRAM - * F9000000 CFFF0000 64K NFC (NAND Flash AXI) + * CFFF0000 64K NFC (NAND Flash AXI) * */ /* + * IROM + */ +#define MX51_IROM_BASE_ADDR 0x0 +#define MX51_IROM_SIZE SZ_64K + +/* * IRAM */ #define MX51_IRAM_BASE_ADDR 0x1FFE0000 /* internal ram */ @@ -40,7 +46,6 @@ * NFC */ #define MX51_NFC_AXI_BASE_ADDR 0xCFFF0000 /* NAND flash AXI */ -#define MX51_NFC_AXI_BASE_ADDR_VIRT 0xF9000000 #define MX51_NFC_AXI_SIZE SZ_64K /* @@ -49,9 +54,8 @@ #define MX51_GPU_BASE_ADDR 0x20000000 #define MX51_GPU2D_BASE_ADDR 0xD0000000 -#define MX51_TZIC_BASE_ADDR 0x8FFFC000 -#define MX51_TZIC_BASE_ADDR_VIRT 0xFA100000 -#define MX51_TZIC_SIZE SZ_16K +#define MX51_TZIC_BASE_ADDR_TO1 0x8FFFC000 +#define MX51_TZIC_BASE_ADDR 0xE0000000 #define MX51_DEBUG_BASE_ADDR 0x60000000 #define MX51_DEBUG_BASE_ADDR_VIRT 0xFA200000 @@ -232,12 +236,10 @@ #define MX51_IO_ADDRESS(x) \ (void __iomem *) \ (MX51_IS_MODULE(x, IRAM) ? MX51_IRAM_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, TZIC) ? MX51_TZIC_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, DEBUG) ? MX51_DEBUG_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, SPBA0) ? MX51_SPBA0_IO_ADDRESS(x) : \ MX51_IS_MODULE(x, AIPS1) ? MX51_AIPS1_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ - MX51_IS_MODULE(x, NFC_AXI) ? MX51_NFC_AXI_IO_ADDRESS(x) : \ + MX51_IS_MODULE(x, AIPS2) ? MX51_AIPS2_IO_ADDRESS(x) : \ 0xDEADBEEF) /* @@ -246,9 +248,6 @@ #define MX51_IRAM_IO_ADDRESS(x) \ (((x) - MX51_IRAM_BASE_ADDR) + MX51_IRAM_BASE_ADDR_VIRT) -#define MX51_TZIC_IO_ADDRESS(x) \ - (((x) - MX51_TZIC_BASE_ADDR) + MX51_TZIC_BASE_ADDR_VIRT) - #define MX51_DEBUG_IO_ADDRESS(x) \ (((x) - MX51_DEBUG_BASE_ADDR) + MX51_DEBUG_BASE_ADDR_VIRT) @@ -261,9 +260,6 @@ #define MX51_AIPS2_IO_ADDRESS(x) \ (((x) - MX51_AIPS2_BASE_ADDR) + MX51_AIPS2_BASE_ADDR_VIRT) -#define MX51_NFC_AXI_IO_ADDRESS(x) \ - (((x) - MX51_NFC_AXI_BASE_ADDR) + MX51_NFC_AXI_BASE_ADDR_VIRT) - #define MX51_IS_MEM_DEVICE_NONSHARED(x) 0 /* @@ -443,12 +439,7 @@ #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS) -extern unsigned int system_rev; - -static inline unsigned int mx51_revision(void) -{ - return system_rev; -} +extern int mx51_revision(void); #endif #endif /* __ASM_ARCH_MXC_MX51_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index 52e476a..b6d3d0f 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -66,6 +66,7 @@ static inline void flush(void) #define MX2X_UART1_BASE_ADDR 0x1000a000 #define MX3X_UART1_BASE_ADDR 0x43F90000 #define MX3X_UART2_BASE_ADDR 0x43F94000 +#define MX51_UART1_BASE_ADDR 0x73fbc000 static __inline__ void __arch_decomp_setup(unsigned long arch_id) { @@ -101,6 +102,9 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MAGX_ZN5: uart_base = MX3X_UART2_BASE_ADDR; break; + case MACH_TYPE_MX51_BABBAGE: + uart_base = MX51_UART1_BASE_ADDR; + break; default: break; } diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 4ff6dfe..c36f263 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -11,6 +11,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index 4a4cd87..95677d1 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -14,6 +14,7 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 2ab224c..5c6c342 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -29,6 +29,7 @@ #include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/system.h> #include <mach/hardware.h> diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c index afd1c27..e6c0d53 100644 --- a/arch/arm/plat-omap/iommu-debug.c +++ b/arch/arm/plat-omap/iommu-debug.c @@ -13,6 +13,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/slab.h> #include <linux/uaccess.h> #include <linux/platform_device.h> #include <linux/debugfs.h> diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c index 905ed83..0e13766 100644 --- a/arch/arm/plat-omap/iommu.c +++ b/arch/arm/plat-omap/iommu.c @@ -13,6 +13,7 @@ #include <linux/err.h> #include <linux/module.h> +#include <linux/slab.h> #include <linux/interrupt.h> #include <linux/ioport.h> #include <linux/clk.h> diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 936aef1..65c6d1f 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -11,6 +11,7 @@ */ #include <linux/err.h> +#include <linux/slab.h> #include <linux/vmalloc.h> #include <linux/device.h> #include <linux/scatterlist.h> diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c index 4229cec..08a2df7 100644 --- a/arch/arm/plat-omap/mailbox.c +++ b/arch/arm/plat-omap/mailbox.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/device.h> #include <linux/delay.h> +#include <linux/slab.h> #include <plat/mailbox.h> diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 52dfcc8..e1d0440 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -23,6 +23,7 @@ #include <linux/clk.h> #include <linux/delay.h> #include <linux/io.h> +#include <linux/slab.h> #include <plat/dma.h> #include <plat/mcbsp.h> diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 5904358..0f51974 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -79,6 +79,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/io.h> diff --git a/arch/arm/plat-pxa/dma.c b/arch/arm/plat-pxa/dma.c index 2975798..742350e 100644 --- a/arch/arm/plat-pxa/dma.c +++ b/arch/arm/plat-pxa/dma.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/init.h> +#include <linux/slab.h> #include <linux/kernel.h> #include <linux/interrupt.h> #include <linux/errno.h> diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c index 51dc5c8..0732c6c 100644 --- a/arch/arm/plat-pxa/pwm.c +++ b/arch/arm/plat-pxa/pwm.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c index 2d42efb..1ecc15b 100644 --- a/arch/arm/plat-s3c24xx/cpu-freq.c +++ b/arch/arm/plat-s3c24xx/cpu-freq.c @@ -23,6 +23,7 @@ #include <linux/sysdev.h> #include <linux/kobject.h> #include <linux/sysfs.h> +#include <linux/slab.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 8c6de1c..9265f09 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -20,6 +20,7 @@ #include <linux/serial_core.h> #include <linux/platform_device.h> #include <linux/io.h> +#include <linux/slab.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c index 963fb0b..b1908e5 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c @@ -17,6 +17,7 @@ #include <linux/cpufreq.h> #include <linux/seq_file.h> #include <linux/io.h> +#include <linux/slab.h> #include <mach/map.h> #include <mach/regs-mem.h> diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c index 24993dc..0b46d38 100644 --- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c +++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c @@ -21,6 +21,7 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/err.h> +#include <linux/slab.h> #include <linux/amba/pl093.h> diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 0b5833b..210030d 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/list.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/interrupt.h> diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index a90198f..002a15f 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -15,6 +15,7 @@ #include <linux/string.h> #include <linux/platform_device.h> #include <linux/fb.h> +#include <linux/gfp.h> #include <mach/irqs.h> #include <mach/map.h> diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c index 4c76152..3a601c1 100644 --- a/arch/arm/plat-samsung/dev-i2c0.c +++ b/arch/arm/plat-samsung/dev-i2c0.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c index d44f791..858ee2a 100644 --- a/arch/arm/plat-samsung/dev-i2c1.c +++ b/arch/arm/plat-samsung/dev-i2c1.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c index a52fb6c..3a7b889 100644 --- a/arch/arm/plat-samsung/dev-nand.c +++ b/arch/arm/plat-samsung/dev-nand.c @@ -6,6 +6,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c index 8816565..0e0a3bf 100644 --- a/arch/arm/plat-samsung/dev-usb.c +++ b/arch/arm/plat-samsung/dev-usb.c @@ -11,6 +11,7 @@ * published by the Free Software Foundation. */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/string.h> #include <linux/platform_device.h> diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 0b5bb77..e4baf76 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/crc32.h> #include <linux/ioport.h> +#include <linux/slab.h> #include <plat/pm.h> diff --git a/arch/arm/plat-samsung/pwm.c b/arch/arm/plat-samsung/pwm.c index f2d1139..2eeb49f 100644 --- a/arch/arm/plat-samsung/pwm.c +++ b/arch/arm/plat-samsung/pwm.c @@ -14,6 +14,7 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/platform_device.h> +#include <linux/slab.h> #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> diff --git a/arch/arm/plat-stmp3xxx/dma.c b/arch/arm/plat-stmp3xxx/dma.c index ef88f25..b4dcf8c 100644 --- a/arch/arm/plat-stmp3xxx/dma.c +++ b/arch/arm/plat-stmp3xxx/dma.c @@ -15,6 +15,7 @@ * http://www.opensource.org/licenses/gpl-license.html * http://www.gnu.org/copyleft/gpl.html */ +#include <linux/gfp.h> #include <linux/kernel.h> #include <linux/device.h> #include <linux/dmapool.h> diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 31c2f4c..1536f17 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sat Feb 20 14:16:15 2010 +# Last update: Sat Mar 20 15:35:41 2010 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -2663,7 +2663,7 @@ reb01 MACH_REB01 REB01 2675 aquila MACH_AQUILA AQUILA 2676 spark_sls_hw2 MACH_SPARK_SLS_HW2 SPARK_SLS_HW2 2677 sheeva_esata MACH_ESATA_SHEEVAPLUG ESATA_SHEEVAPLUG 2678 -surf7x30 MACH_SURF7X30 SURF7X30 2679 +msm7x30_surf MACH_MSM7X30_SURF MSM7X30_SURF 2679 micro2440 MACH_MICRO2440 MICRO2440 2680 am2440 MACH_AM2440 AM2440 2681 tq2440 MACH_TQ2440 TQ2440 2682 @@ -2678,3 +2678,74 @@ vc088x MACH_VC088X VC088X 2690 mioa702 MACH_MIOA702 MIOA702 2691 hpmin MACH_HPMIN HPMIN 2692 ak880xak MACH_AK880XAK AK880XAK 2693 +arm926tomap850 MACH_ARM926TOMAP850 ARM926TOMAP850 2694 +lkevm MACH_LKEVM LKEVM 2695 +mw6410 MACH_MW6410 MW6410 2696 +terastation_wxl MACH_TERASTATION_WXL TERASTATION_WXL 2697 +cpu8000e MACH_CPU8000E CPU8000E 2698 +catania MACH_CATANIA CATANIA 2699 +tokyo MACH_TOKYO TOKYO 2700 +msm7201a_surf MACH_MSM7201A_SURF MSM7201A_SURF 2701 +msm7201a_ffa MACH_MSM7201A_FFA MSM7201A_FFA 2702 +msm7x25_surf MACH_MSM7X25_SURF MSM7X25_SURF 2703 +msm7x25_ffa MACH_MSM7X25_FFA MSM7X25_FFA 2704 +msm7x27_surf MACH_MSM7X27_SURF MSM7X27_SURF 2705 +msm7x27_ffa MACH_MSM7X27_FFA MSM7X27_FFA 2706 +msm7x30_ffa MACH_MSM7X30_FFA MSM7X30_FFA 2707 +qsd8x50_surf MACH_QSD8X50_SURF QSD8X50_SURF 2708 +qsd8x50_comet MACH_QSD8X50_COMET QSD8X50_COMET 2709 +qsd8x50_ffa MACH_QSD8X50_FFA QSD8X50_FFA 2710 +qsd8x50a_surf MACH_QSD8X50A_SURF QSD8X50A_SURF 2711 +qsd8x50a_ffa MACH_QSD8X50A_FFA QSD8X50A_FFA 2712 +adx_xgcp10 MACH_ADX_XGCP10 ADX_XGCP10 2713 +mcgwumts2a MACH_MCGWUMTS2A MCGWUMTS2A 2714 +mobikt MACH_MOBIKT MOBIKT 2715 +mx53_evk MACH_MX53_EVK MX53_EVK 2716 +igep0030 MACH_IGEP0030 IGEP0030 2717 +axell_h40_h50_ctrl MACH_AXELL_H40_H50_CTRL AXELL_H40_H50_CTRL 2718 +dtcommod MACH_DTCOMMOD DTCOMMOD 2719 +gould MACH_GOULD GOULD 2720 +siberia MACH_SIBERIA SIBERIA 2721 +sbc3530 MACH_SBC3530 SBC3530 2722 +qarm MACH_QARM QARM 2723 +mips MACH_MIPS MIPS 2724 +mx27grb MACH_MX27GRB MX27GRB 2725 +sbc8100 MACH_SBC8100 SBC8100 2726 +saarb MACH_SAARB SAARB 2727 +omap3mini MACH_OMAP3MINI OMAP3MINI 2728 +cnmbook7se MACH_CNMBOOK7SE CNMBOOK7SE 2729 +catan MACH_CATAN CATAN 2730 +harmony MACH_HARMONY HARMONY 2731 +tonga MACH_TONGA TONGA 2732 +cybook_orizon MACH_CYBOOK_ORIZON CYBOOK_ORIZON 2733 +htcrhodiumcdma MACH_HTCRHODIUMCDMA HTCRHODIUMCDMA 2734 +epc_g45 MACH_EPC_G45 EPC_G45 2735 +epc_lpc3250 MACH_EPC_LPC3250 EPC_LPC3250 2736 +mxc91341evb MACH_MXC91341EVB MXC91341EVB 2737 +rtw1000 MACH_RTW1000 RTW1000 2738 +bobcat MACH_BOBCAT BOBCAT 2739 +trizeps6 MACH_TRIZEPS6 TRIZEPS6 2740 +msm7x30_fluid MACH_MSM7X30_FLUID MSM7X30_FLUID 2741 +nedap9263 MACH_NEDAP9263 NEDAP9263 2742 +netgear_ms2110 MACH_NETGEAR_MS2110 NETGEAR_MS2110 2743 +bmx MACH_BMX BMX 2744 +netstream MACH_NETSTREAM NETSTREAM 2745 +vpnext_rcu MACH_VPNEXT_RCU VPNEXT_RCU 2746 +vpnext_mpu MACH_VPNEXT_MPU VPNEXT_MPU 2747 +bcmring_tablet_v1 MACH_BCMRING_TABLET_V1 BCMRING_TABLET_V1 2748 +sgarm10 MACH_SGARM10 SGARM10 2749 +cm_t3517 MACH_CM_T3517 CM_T3517 2750 +omap3_cps MACH_OMAP3_CPS OMAP3_CPS 2751 +axar1500_receiver MACH_AXAR1500_RECEIVER AXAR1500_RECEIVER 2752 +wbd222 MACH_WBD222 WBD222 2753 +mt65xx MACH_MT65XX MT65XX 2754 +msm8x60_surf MACH_MSM8X60_SURF MSM8X60_SURF 2755 +msm8x60_sim MACH_MSM8X60_SIM MSM8X60_SIM 2756 +vmc300 MACH_VMC300 VMC300 2757 +tcc8000_sdk MACH_TCC8000_SDK TCC8000_SDK 2758 +nanos MACH_NANOS NANOS 2759 +stamp9g10 MACH_STAMP9G10 STAMP9G10 2760 +stamp9g45 MACH_STAMP9G45 STAMP9G45 2761 +h6053 MACH_H6053 H6053 2762 +smint01 MACH_SMINT01 SMINT01 2763 +prtlvt2 MACH_PRTLVT2 PRTLVT2 2764 diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index 7f3f59f..a420cb9 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -545,7 +545,7 @@ static int __init vfp_init(void) */ elf_hwcap |= HWCAP_VFP; #ifdef CONFIG_VFPv3 - if (VFP_arch >= 3) { + if (VFP_arch >= 2) { elf_hwcap |= HWCAP_VFPv3; /* |