diff options
author | Arnd Bergmann <arnd@arndb.de> | 2012-04-22 20:45:53 (GMT) |
---|---|---|
committer | Olof Johansson <olof@lixom.net> | 2012-05-09 09:14:34 (GMT) |
commit | 19f36bfa0021617ce07a79e186673d2da2258b60 (patch) | |
tree | 7b461a4c43efa70dcb5c4c2406037e24eb7f4011 /arch/arm | |
parent | 02abb80f9003b20257fef399a6bb0e0425e69bc2 (diff) | |
parent | 5019f0b1345b8f6a8e8a0c7c2f89d4a31819a317 (diff) | |
download | linux-fsl-qoriq-19f36bfa0021617ce07a79e186673d2da2258b60.tar.xz |
Merge branch 'spear/dt' into next/dt
This is a rebased version of parts of
git://git.stlinux.com/spear/linux-2.6.git spear-v3.5
which was accidentally based on the linux-next tree and mixed too
many different things. The pinctrl related changes from the same
branch are now in the spear/pinctrl branch of arm-soc.
There are a few non-DT cleanups mixed in here, but fundamentally
it's all related to the DT conversion.
* spear/dt: (9 commits)
ARM: spear: remove most mach/*.h header contents
SPEAr: Update defconfigs
SPEAr: Add PL080 DMA support for 3xx and 6xx
ARM: SPEAr3xx: Add device-tree support to SPEAr3xx architecture
SPEAr3xx: Replace printk() with pr_*()
SPEAr6xx: Add compilation support for dtbs using 'make dtbs'
SPEAr3xx: Add clock instance of usb hosts - ehci and ohci 0 and 1
SPEAr: Use CLKDEV_INIT for defining clk_lookups
ARM: SPEAr600: Change FSMC and SMI clock names
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: rebuilt branch due to drop of an early merge]
Signed-off-by: Olof Johansson <olof@lixom.net>
Diffstat (limited to 'arch/arm')
83 files changed, 2972 insertions, 1700 deletions
diff --git a/arch/arm/boot/compressed/atags_to_fdt.c b/arch/arm/boot/compressed/atags_to_fdt.c index 6ce11c4..797f04b 100644 --- a/arch/arm/boot/compressed/atags_to_fdt.c +++ b/arch/arm/boot/compressed/atags_to_fdt.c @@ -77,6 +77,8 @@ int atags_to_fdt(void *atag_list, void *fdt, int total_space) } else if (atag->hdr.tag == ATAG_MEM) { if (memcount >= sizeof(mem_reg_property)/4) continue; + if (!atag->u.mem.size) + continue; mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.start); mem_reg_property[memcount++] = cpu_to_fdt32(atag->u.mem.size); } else if (atag->hdr.tag == ATAG_INITRD2) { diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 5f6045f..dc7e8ce 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -273,7 +273,7 @@ restart: adr r0, LC0 add r0, r0, #0x100 mov r1, r6 sub r2, sp, r6 - blne atags_to_fdt + bleq atags_to_fdt ldmfd sp!, {r0-r3, ip, lr} sub sp, sp, #0x10000 diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 799ad18..773ef48 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -55,7 +55,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 9e6eb6e..c804214 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -56,7 +56,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 70ab3a4..dd4ed74 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -54,7 +54,6 @@ #interrupt-cells = <2>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; - interrupt-parent; reg = <0xfffff000 0x200>; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index d73dce6..14bc307 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -24,7 +24,6 @@ #interrupt-cells = <3>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xa0411000 0x1000>, <0xa0410100 0x100>; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 37c0ff9c..83e7229 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -89,7 +89,6 @@ #size-cells = <0>; #address-cells = <1>; interrupt-controller; - interrupt-parent; reg = <0xfff11000 0x1000>, <0xfff10100 0x100>; }; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts new file mode 100644 index 0000000..eaecc29 --- /dev/null +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -0,0 +1,183 @@ +/* + * DTS file for SPEAr300 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear300.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@60000000 { + status = "okay"; + }; + + dma@fc400000 { + status = "okay"; + }; + + fsmc: flash@94000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + int-gpio = <&gpio1 0 0>; + power-gpio = <&gpio1 2 1>; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + gpio1: gpio@a9000000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + kbd@a0000000 { + linux,keymap = < 0x00010000 + 0x00020100 + 0x00030200 + 0x00040300 + 0x00050400 + 0x00060500 + 0x00070600 + 0x00080700 + 0x00090800 + 0x000a0001 + 0x000c0101 + 0x000d0201 + 0x000e0301 + 0x000f0401 + 0x00100501 + 0x00110601 + 0x00120701 + 0x00130801 + 0x00140002 + 0x00150102 + 0x00160202 + 0x00170302 + 0x00180402 + 0x00190502 + 0x001a0602 + 0x001b0702 + 0x001c0802 + 0x001d0003 + 0x001e0103 + 0x001f0203 + 0x00200303 + 0x00210403 + 0x00220503 + 0x00230603 + 0x00240703 + 0x00250803 + 0x00260004 + 0x00270104 + 0x00280204 + 0x00290304 + 0x002a0404 + 0x002b0504 + 0x002c0604 + 0x002d0704 + 0x002e0804 + 0x002f0005 + 0x00300105 + 0x00310205 + 0x00320305 + 0x00330405 + 0x00340505 + 0x00350605 + 0x00360705 + 0x00370805 + 0x00380006 + 0x00390106 + 0x003a0206 + 0x003b0306 + 0x003c0406 + 0x003d0506 + 0x003e0606 + 0x003f0706 + 0x00400806 + 0x00410007 + 0x00420107 + 0x00430207 + 0x00440307 + 0x00450407 + 0x00460507 + 0x00470607 + 0x00480707 + 0x00490807 + 0x004a0008 + 0x004b0108 + 0x004c0208 + 0x004d0308 + 0x004e0408 + 0x004f0508 + 0x00500608 + 0x00510708 + 0x00520808 >; + autorepeat; + st,mode = <0>; + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi new file mode 100644 index 0000000..f9fcbf4 --- /dev/null +++ b/arch/arm/boot/dts/spear300.dtsi @@ -0,0 +1,72 @@ +/* + * DTS file for SPEAr300 SoC + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x60000000 0x60000000 0x50000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@60000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x60000000 0x1000>; + interrupts = <30>; + status = "disabled"; + }; + + fsmc: flash@94000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x94000000 0x1000 /* FSMC Register */ + 0x80000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <1>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + gpio1: gpio@a9000000 { + #gpio-cells = <2>; + compatible = "arm,pl061", "arm,primecell"; + gpio-controller; + reg = <0xa9000000 0x1000>; + status = "disabled"; + }; + + kbd@a0000000 { + compatible = "st,spear300-kbd"; + reg = <0xa0000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts new file mode 100644 index 0000000..c86af33 --- /dev/null +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -0,0 +1,111 @@ +/* + * DTS file for SPEAr310 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear310.dtsi" + +/ { + model = "ST SPEAr310 Evaluation Board"; + compatible = "st,spear310-evb", "st,spear310"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + dma@fc400000 { + status = "okay"; + }; + + fsmc: flash@44000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + clock-rate=<50000000>; + + flash@f8000000 { + label = "m25p64"; + reg = <0xf8000000 0x800000>; + #address-cells = <1>; + #size-cells = <1>; + st,smi-fast-mode; + }; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@b2000000 { + status = "okay"; + }; + + serial@b2080000 { + status = "okay"; + }; + + serial@b2100000 { + status = "okay"; + }; + + serial@b2180000 { + status = "okay"; + }; + + serial@b2200000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi new file mode 100644 index 0000000..dc7fa14 --- /dev/null +++ b/arch/arm/boot/dts/spear310.dtsi @@ -0,0 +1,75 @@ +/* + * DTS file for SPEAr310 SoC + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x10000000 + 0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + fsmc: flash@44000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x44000000 0x1000 /* FSMC Register */ + 0x40000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x10000>; + st,cle-off = <0x20000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xb0000000 0xb0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + serial@b2000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2000000 0x1000>; + status = "disabled"; + }; + + serial@b2080000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2080000 0x1000>; + status = "disabled"; + }; + + serial@b2100000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2100000 0x1000>; + status = "disabled"; + }; + + serial@b2180000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2180000 0x1000>; + status = "disabled"; + }; + + serial@b2200000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb2200000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts new file mode 100644 index 0000000..d43de71 --- /dev/null +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -0,0 +1,112 @@ +/* + * DTS file for SPEAr320 Evaluation Baord + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "spear320.dtsi" + +/ { + model = "ST SPEAr300 Evaluation Board"; + compatible = "st,spear300-evb", "st,spear300"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + reg = <0 0x40000000>; + }; + + ahb { + clcd@90000000 { + status = "okay"; + }; + + dma@fc400000 { + status = "okay"; + }; + + fsmc: flash@4c000000 { + status = "okay"; + }; + + gmac: eth@e0800000 { + status = "okay"; + }; + + sdhci@70000000 { + power-gpio = <&gpio0 2 1>; + power_always_enb; + status = "okay"; + }; + + smi: flash@fc000000 { + status = "okay"; + }; + + spi0: spi@d0100000 { + status = "okay"; + }; + + spi1: spi@a5000000 { + status = "okay"; + }; + + spi2: spi@a6000000 { + status = "okay"; + }; + + ehci@e1800000 { + status = "okay"; + }; + + ohci@e1900000 { + status = "okay"; + }; + + ohci@e2100000 { + status = "okay"; + }; + + apb { + gpio0: gpio@fc980000 { + status = "okay"; + }; + + i2c0: i2c@d0180000 { + status = "okay"; + }; + + i2c1: i2c@a7000000 { + status = "okay"; + }; + + rtc@fc900000 { + status = "okay"; + }; + + serial@d0000000 { + status = "okay"; + }; + + serial@a3000000 { + status = "okay"; + }; + + serial@a4000000 { + status = "okay"; + }; + + wdt@fc880000 { + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi new file mode 100644 index 0000000..9a0267a --- /dev/null +++ b/arch/arm/boot/dts/spear320.dtsi @@ -0,0 +1,90 @@ +/* + * DTS file for SPEAr320 SoC + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "spear3xx.dtsi" + +/ { + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0x40000000 0x40000000 0x70000000 + 0xd0000000 0xd0000000 0x30000000>; + + clcd@90000000 { + compatible = "arm,clcd-pl110", "arm,primecell"; + reg = <0x90000000 0x1000>; + interrupts = <33>; + status = "disabled"; + }; + + fsmc: flash@4c000000 { + compatible = "st,spear600-fsmc-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x4c000000 0x1000 /* FSMC Register */ + 0x50000000 0x0010>; /* NAND Base */ + reg-names = "fsmc_regs", "nand_data"; + st,ale-off = <0x20000>; + st,cle-off = <0x10000>; + status = "disabled"; + }; + + sdhci@70000000 { + compatible = "st,sdhci-spear"; + reg = <0x70000000 0x100>; + interrupts = <29>; + status = "disabled"; + }; + + spi1: spi@a5000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa5000000 0x1000>; + status = "disabled"; + }; + + spi2: spi@a6000000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xa6000000 0x1000>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xa0000000 0xa0000000 0x10000000 + 0xd0000000 0xd0000000 0x30000000>; + + i2c1: i2c@a7000000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xa7000000 0x1000>; + status = "disabled"; + }; + + serial@a3000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa3000000 0x1000>; + status = "disabled"; + }; + + serial@a4000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xa4000000 0x1000>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi new file mode 100644 index 0000000..0ae7c8e --- /dev/null +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -0,0 +1,144 @@ +/* + * DTS file for all SPEAr3xx SoCs + * + * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&vic>; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + ahb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + vic: interrupt-controller@f1100000 { + compatible = "arm,pl190-vic"; + interrupt-controller; + reg = <0xf1100000 0x1000>; + #interrupt-cells = <1>; + }; + + dma@fc400000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0xfc400000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <8>; + status = "disabled"; + }; + + gmac: eth@e0800000 { + compatible = "st,spear600-gmac"; + reg = <0xe0800000 0x8000>; + interrupts = <23 22>; + interrupt-names = "macirq", "eth_wake_irq"; + status = "disabled"; + }; + + smi: flash@fc000000 { + compatible = "st,spear600-smi"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0xfc000000 0x1000>; + interrupts = <9>; + status = "disabled"; + }; + + spi0: spi@d0100000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0xd0100000 0x1000>; + interrupts = <20>; + status = "disabled"; + }; + + ehci@e1800000 { + compatible = "st,spear600-ehci", "usb-ehci"; + reg = <0xe1800000 0x1000>; + interrupts = <26>; + status = "disabled"; + }; + + ohci@e1900000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe1900000 0x1000>; + interrupts = <25>; + status = "disabled"; + }; + + ohci@e2100000 { + compatible = "st,spear600-ohci", "usb-ohci"; + reg = <0xe2100000 0x1000>; + interrupts = <27>; + status = "disabled"; + }; + + apb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0xd0000000 0xd0000000 0x30000000>; + + gpio0: gpio@fc980000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0xfc980000 0x1000>; + interrupts = <11>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + status = "disabled"; + }; + + i2c0: i2c@d0180000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,designware-i2c"; + reg = <0xd0180000 0x1000>; + interrupts = <21>; + status = "disabled"; + }; + + rtc@fc900000 { + compatible = "st,spear-rtc"; + reg = <0xfc900000 0x1000>; + interrupts = <10>; + status = "disabled"; + }; + + serial@d0000000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xd0000000 0x1000>; + interrupts = <19>; + status = "disabled"; + }; + + wdt@fc880000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0xfc880000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/spear600-evb.dts b/arch/arm/boot/dts/spear600-evb.dts index 636292e..790a7a8 100644 --- a/arch/arm/boot/dts/spear600-evb.dts +++ b/arch/arm/boot/dts/spear600-evb.dts @@ -24,6 +24,10 @@ }; ahb { + dma@fc400000 { + status = "okay"; + }; + gmac: ethernet@e0800000 { phy-mode = "gmii"; status = "okay"; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index ebe0885..d777e3a 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -45,6 +45,14 @@ #interrupt-cells = <1>; }; + dma@fc400000 { + compatible = "arm,pl080", "arm,primecell"; + reg = <0xfc400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <10>; + status = "disabled"; + }; + gmac: ethernet@e0800000 { compatible = "st,spear600-gmac"; reg = <0xe0800000 0x8000>; diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index 7a66311..7e288f9 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -427,19 +427,18 @@ int __init vic_of_init(struct device_node *node, struct device_node *parent) /* * Handle each interrupt in a single VIC. Returns non-zero if we've - * handled at least one interrupt. This does a single read of the - * status register and handles all interrupts in order from LSB first. + * handled at least one interrupt. This reads the status register + * before handling each interrupt, which is necessary given that + * handle_IRQ may briefly re-enable interrupts for soft IRQ handling. */ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs) { u32 stat, irq; int handled = 0; - stat = readl_relaxed(vic->base + VIC_IRQ_STATUS); - while (stat) { + while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) { irq = ffs(stat) - 1; handle_IRQ(irq_find_mapping(vic->domain, irq), regs); - stat &= ~(1 << irq); handled = 1; } diff --git a/arch/arm/configs/spear3xx_defconfig b/arch/arm/configs/spear3xx_defconfig index fea7e1f..7ed4291 100644 --- a/arch/arm/configs/spear3xx_defconfig +++ b/arch/arm/configs/spear3xx_defconfig @@ -2,33 +2,67 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y -CONFIG_BOARD_SPEAR300_EVB=y -CONFIG_BOARD_SPEAR310_EVB=y -CONFIG_BOARD_SPEAR320_EVB=y +CONFIG_MACH_SPEAR300=y +CONFIG_MACH_SPEAR310=y +CONFIG_MACH_SPEAR320=y CONFIG_BINFMT_MISC=y +CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set -# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_SPEAR=y # CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +# CONFIG_USB_DEVICE_CLASS is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_SPEAR=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_DMATEST=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_SECURITY=y @@ -39,8 +73,6 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m @@ -48,6 +80,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/configs/spear6xx_defconfig b/arch/arm/configs/spear6xx_defconfig index cef2e83..cf94bc7 100644 --- a/arch/arm/configs/spear6xx_defconfig +++ b/arch/arm/configs/spear6xx_defconfig @@ -2,29 +2,58 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODVERSIONS=y +CONFIG_PARTITION_ADVANCED=y CONFIG_PLAT_SPEAR=y CONFIG_ARCH_SPEAR6XX=y -CONFIG_BOARD_SPEAR600_EVB=y +CONFIG_BOARD_SPEAR600_DT=y CONFIG_BINFMT_MISC=y +CONFIG_NET=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_NETDEVICES=y +# CONFIG_NET_VENDOR_BROADCOM is not set +# CONFIG_NET_VENDOR_CIRRUS is not set +# CONFIG_NET_VENDOR_FARADAY is not set +# CONFIG_NET_VENDOR_INTEL is not set +# CONFIG_NET_VENDOR_MICREL is not set +# CONFIG_NET_VENDOR_NATSEMI is not set +# CONFIG_NET_VENDOR_SEEQ is not set +# CONFIG_NET_VENDOR_SMSC is not set +CONFIG_STMMAC_ETH=y +# CONFIG_WLAN is not set CONFIG_INPUT_FF_MEMLESS=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=8192 +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_PL061=y # CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +CONFIG_ARM_SP805_WATCHDOG=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_RTC_CLASS=y +CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y +CONFIG_DMATEST=m CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_SECURITY=y @@ -35,8 +64,6 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m @@ -44,6 +71,4 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y CONFIG_DEBUG_INFO=y -# CONFIG_CRC32 is not set diff --git a/arch/arm/include/asm/jump_label.h b/arch/arm/include/asm/jump_label.h index 5c5ca2e..bfc198c 100644 --- a/arch/arm/include/asm/jump_label.h +++ b/arch/arm/include/asm/jump_label.h @@ -14,7 +14,7 @@ #define JUMP_LABEL_NOP "nop" #endif -static __always_inline bool arch_static_branch(struct jump_label_key *key) +static __always_inline bool arch_static_branch(struct static_key *key) { asm goto("1:\n\t" JUMP_LABEL_NOP "\n\t" diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b914113..ebfac78 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -523,7 +523,21 @@ int __init arm_add_memory(phys_addr_t start, unsigned long size) */ size -= start & ~PAGE_MASK; bank->start = PAGE_ALIGN(start); - bank->size = size & PAGE_MASK; + +#ifndef CONFIG_LPAE + if (bank->start + size < bank->start) { + printk(KERN_CRIT "Truncating memory at 0x%08llx to fit in " + "32-bit physical address space\n", (long long)start); + /* + * To ensure bank->start + bank->size is representable in + * 32 bits, we use ULONG_MAX as the upper limit rather than 4GB. + * This means we lose a page after masking. + */ + size = ULONG_MAX - bank->start; + } +#endif + + bank->size = size & PAGE_MASK; /* * Check whether this memory region has non-zero size or diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fef42b2..5b150af 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -118,10 +118,14 @@ static int twd_cpufreq_transition(struct notifier_block *nb, * The twd clock events must be reprogrammed to account for the new * frequency. The timer is local to a cpu, so cross-call to the * changing cpu. + * + * Only wait for it to finish, if the cpu is active to avoid + * deadlock when cpu1 is spinning on while(!cpu_active(cpu1)) during + * booting of that cpu. */ if (state == CPUFREQ_POSTCHANGE || state == CPUFREQ_RESUMECHANGE) smp_call_function_single(freqs->cpu, twd_update_frequency, - NULL, 1); + NULL, cpu_active(freqs->cpu)); return NOTIFY_OK; } diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 0491cee..e81c35f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -368,6 +368,7 @@ comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" + depends on ARCH_EXYNOS4 select CPU_EXYNOS4210 select USE_OF select ARM_AMBA @@ -380,6 +381,7 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" + depends on ARCH_EXYNOS5 select SOC_EXYNOS5250 select USE_OF select ARM_AMBA diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 9bee853..591e785 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -212,6 +212,8 @@ #define IRQ_MFC EXYNOS4_IRQ_MFC #define IRQ_SDO EXYNOS4_IRQ_SDO +#define IRQ_I2S0 EXYNOS4_IRQ_I2S0 + #define IRQ_ADC EXYNOS4_IRQ_ADC0 #define IRQ_TC EXYNOS4_IRQ_PEN0 diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index 024d38f..6e6d11f 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -89,6 +89,10 @@ #define EXYNOS4_PA_MDMA1 0x12840000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 +#define EXYNOS5_PA_MDMA0 0x10800000 +#define EXYNOS5_PA_MDMA1 0x11C10000 +#define EXYNOS5_PA_PDMA0 0x121A0000 +#define EXYNOS5_PA_PDMA1 0x121B0000 #define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000 #define EXYNOS4_PA_SYSMMU_SSS 0x10A50000 diff --git a/arch/arm/mach-exynos/include/mach/regs-clock.h b/arch/arm/mach-exynos/include/mach/regs-clock.h index e141c1f..d9578a5 100644 --- a/arch/arm/mach-exynos/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos/include/mach/regs-clock.h @@ -255,9 +255,15 @@ /* For EXYNOS5250 */ +#define EXYNOS5_APLL_LOCK EXYNOS_CLKREG(0x00000) #define EXYNOS5_APLL_CON0 EXYNOS_CLKREG(0x00100) #define EXYNOS5_CLKSRC_CPU EXYNOS_CLKREG(0x00200) +#define EXYNOS5_CLKMUX_STATCPU EXYNOS_CLKREG(0x00400) #define EXYNOS5_CLKDIV_CPU0 EXYNOS_CLKREG(0x00500) +#define EXYNOS5_CLKDIV_CPU1 EXYNOS_CLKREG(0x00504) +#define EXYNOS5_CLKDIV_STATCPU0 EXYNOS_CLKREG(0x00600) +#define EXYNOS5_CLKDIV_STATCPU1 EXYNOS_CLKREG(0x00604) + #define EXYNOS5_MPLL_CON0 EXYNOS_CLKREG(0x04100) #define EXYNOS5_CLKSRC_CORE1 EXYNOS_CLKREG(0x04204) diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 0d26f50..4711c89 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -45,7 +45,7 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "exynos4210-uart.3", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), - OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.2", NULL), + OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), {}, }; diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index b3982c8..b4f1f90 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -307,49 +307,7 @@ static struct i2c_board_info i2c1_devs[] __initdata = { }; /* TSP */ -static u8 mxt_init_vals[] = { - /* MXT_GEN_COMMAND(6) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_GEN_POWER(7) */ - 0x20, 0xff, 0x32, - /* MXT_GEN_ACQUIRE(8) */ - 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, - /* MXT_TOUCH_MULTI(9) */ - 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, - /* MXT_TOUCH_KEYARRAY(15) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, - 0x00, - /* MXT_SPT_GPIOPWM(19) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_GRIPFACE(20) */ - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, - 0x0f, 0x0a, - /* MXT_PROCG_NOISE(22) */ - 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, - 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, - /* MXT_TOUCH_PROXIMITY(23) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_ONETOUCH(24) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_SELFTEST(25) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, - /* MXT_PROCI_TWOTOUCH(27) */ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - /* MXT_SPT_CTECONFIG(28) */ - 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, -}; - static struct mxt_platform_data mxt_platform_data = { - .config = mxt_init_vals, - .config_length = ARRAY_SIZE(mxt_init_vals), - .x_line = 18, .y_line = 11, .x_size = 1024, @@ -571,7 +529,7 @@ static struct regulator_init_data __initdata max8997_ldo7_data = { static struct regulator_init_data __initdata max8997_ldo8_data = { .constraints = { - .name = "VUSB/VDAC_3.3V_C210", + .name = "VUSB+VDAC_3.3V_C210", .min_uV = 3300000, .max_uV = 3300000, .valid_ops_mask = REGULATOR_CHANGE_STATUS, @@ -1347,6 +1305,7 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); @@ -1379,7 +1338,6 @@ static void __init nuri_machine_init(void) nuri_camera_init(); nuri_ehci_init(); - clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 6bb9dbd..7ebf79c 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -29,6 +29,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/iic.h> @@ -1057,6 +1058,7 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { + clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); diff --git a/arch/arm/mach-msm/board-halibut.c b/arch/arm/mach-msm/board-halibut.c index 3698a37..26aac36 100644 --- a/arch/arm/mach-msm/board-halibut.c +++ b/arch/arm/mach-msm/board-halibut.c @@ -86,9 +86,6 @@ static void __init halibut_init(void) static void __init halibut_fixup(struct tag *tags, char **cmdline, struct meminfo *mi) { - mi->nr_banks=1; - mi->bank[0].start = PHYS_OFFSET; - mi->bank[0].size = (101*1024*1024); } static void __init halibut_map_io(void) diff --git a/arch/arm/mach-msm/board-trout-panel.c b/arch/arm/mach-msm/board-trout-panel.c index 25105c1..89bf6b4 100644 --- a/arch/arm/mach-msm/board-trout-panel.c +++ b/arch/arm/mach-msm/board-trout-panel.c @@ -12,6 +12,7 @@ #include <asm/io.h> #include <asm/mach-types.h> +#include <asm/system_info.h> #include <mach/msm_fb.h> #include <mach/vreg.h> diff --git a/arch/arm/mach-msm/board-trout.c b/arch/arm/mach-msm/board-trout.c index 5414f76..d4060a3 100644 --- a/arch/arm/mach-msm/board-trout.c +++ b/arch/arm/mach-msm/board-trout.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/clkdev.h> +#include <asm/system_info.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-msm/proc_comm.c b/arch/arm/mach-msm/proc_comm.c index 67e701c..9980dc7 100644 --- a/arch/arm/mach-msm/proc_comm.c +++ b/arch/arm/mach-msm/proc_comm.c @@ -121,7 +121,7 @@ int msm_proc_comm(unsigned cmd, unsigned *data1, unsigned *data2) * and unknown state. This function should be called early to * wait on the ARM9. */ -void __init proc_comm_boot_wait(void) +void __devinit proc_comm_boot_wait(void) { void __iomem *base = MSM_SHARED_RAM_BASE; diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c index 7072e0d..3d9d746 100644 --- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c +++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c @@ -165,83 +165,3 @@ int omap2_select_table_rate(struct clk *clk, unsigned long rate) return 0; } - -#ifdef CONFIG_CPU_FREQ -/* - * Walk PRCM rate table and fillout cpufreq freq_table - * XXX This should be replaced by an OPP layer in the near future - */ -static struct cpufreq_frequency_table *freq_table; - -void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - const struct prcm_config *prcm; - int i = 0; - int tbl_sz = 0; - - if (!cpu_is_omap24xx()) - return; - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - tbl_sz++; - } - - /* - * XXX Ensure that we're doing what CPUFreq expects for this error - * case and the following one - */ - if (tbl_sz == 0) { - pr_warning("%s: no matching entries in rate_table\n", - __func__); - return; - } - - /* Include the CPUFREQ_TABLE_END terminator entry */ - tbl_sz++; - - freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz, - GFP_ATOMIC); - if (!freq_table) { - pr_err("%s: could not kzalloc frequency table\n", __func__); - return; - } - - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sclk->rate) - continue; - - /* don't put bypass rates in table */ - if (prcm->dpll_speed == prcm->xtal_speed) - continue; - - freq_table[i].index = i; - freq_table[i].frequency = prcm->mpu_speed / 1000; - i++; - } - - freq_table[i].index = i; - freq_table[i].frequency = CPUFREQ_TABLE_END; - - *table = &freq_table[0]; -} - -void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - if (!cpu_is_omap24xx()) - return; - - kfree(freq_table); -} - -#endif diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index f57ed5b..d9f4931 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -536,10 +536,5 @@ struct clk_functions omap2_clk_functions = { .clk_set_rate = omap2_clk_set_rate, .clk_set_parent = omap2_clk_set_parent, .clk_disable_unused = omap2_clk_disable_unused, -#ifdef CONFIG_CPU_FREQ - /* These will be removed when the OPP code is integrated */ - .clk_init_cpufreq_table = omap2_clk_init_cpufreq_table, - .clk_exit_cpufreq_table = omap2_clk_exit_cpufreq_table, -#endif }; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b8c2a68..a1bb23a 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -146,14 +146,6 @@ extern const struct clksel_rate gpt_sys_rates[]; extern const struct clksel_rate gfx_l3_rates[]; extern const struct clksel_rate dsp_ick_rates[]; -#if defined(CONFIG_ARCH_OMAP2) && defined(CONFIG_CPU_FREQ) -extern void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#else -#define omap2_clk_init_cpufreq_table 0 -#define omap2_clk_exit_cpufreq_table 0 -#endif - extern const struct clkops clkops_omap2_iclk_dflt_wait; extern const struct clkops clkops_omap2_iclk_dflt; extern const struct clkops clkops_omap2_iclk_idle_only; diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 86ce62f..b8337e2 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -33,8 +33,6 @@ #include <mach/irqs.h> #include <mach/dma.h> -static u64 dma_dmamask = DMA_BIT_MASK(32); - static u8 pdma0_peri[] = { DMACH_UART0_RX, DMACH_UART0_TX, diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index a9ea64e..48d018f 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -484,8 +484,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 2cf5ed7..a8933de 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -674,8 +674,8 @@ static struct wm8994_pdata wm8994_platform_data = { .gpio_defaults[8] = 0x0100, .gpio_defaults[9] = 0x0100, .gpio_defaults[10] = 0x0100, - .ldo[0] = { S5PV210_MP03(6), NULL, &wm8994_ldo1_data }, /* XM0FRNB_2 */ - .ldo[1] = { 0, NULL, &wm8994_ldo2_data }, + .ldo[0] = { S5PV210_MP03(6), &wm8994_ldo1_data }, /* XM0FRNB_2 */ + .ldo[1] = { 0, &wm8994_ldo2_data }, }; /* GPIO I2C PMIC */ diff --git a/arch/arm/mach-spear3xx/Kconfig b/arch/arm/mach-spear3xx/Kconfig index 2cee6b0..d9fe11c 100644 --- a/arch/arm/mach-spear3xx/Kconfig +++ b/arch/arm/mach-spear3xx/Kconfig @@ -5,39 +5,19 @@ if ARCH_SPEAR3XX menu "SPEAr3xx Implementations" -config BOARD_SPEAR300_EVB - bool "SPEAr300 Evaluation Board" - select MACH_SPEAR300 - help - Supports ST SPEAr300 Evaluation Board - -config BOARD_SPEAR310_EVB - bool "SPEAr310 Evaluation Board" - select MACH_SPEAR310 - help - Supports ST SPEAr310 Evaluation Board - -config BOARD_SPEAR320_EVB - bool "SPEAr320 Evaluation Board" - select MACH_SPEAR320 - help - Supports ST SPEAr320 Evaluation Board - -endmenu - config MACH_SPEAR300 - bool "SPEAr300" + bool "SPEAr300 Machine support with Device Tree" help - Supports ST SPEAr300 Machine + Supports ST SPEAr300 machine configured via the device-tree config MACH_SPEAR310 - bool "SPEAr310" + bool "SPEAr310 Machine support with Device Tree" help - Supports ST SPEAr310 Machine + Supports ST SPEAr310 machine configured via the device-tree config MACH_SPEAR320 - bool "SPEAr320" + bool "SPEAr320 Machine support with Device Tree" help - Supports ST SPEAr320 Machine - + Supports ST SPEAr320 machine configured via the device-tree +endmenu endif #ARCH_SPEAR3XX diff --git a/arch/arm/mach-spear3xx/Makefile b/arch/arm/mach-spear3xx/Makefile index b248624..17b5d83 100644 --- a/arch/arm/mach-spear3xx/Makefile +++ b/arch/arm/mach-spear3xx/Makefile @@ -3,24 +3,13 @@ # # common files -obj-y += spear3xx.o clock.o +obj-$(CONFIG_ARCH_SPEAR3XX) += spear3xx.o clock.o # spear300 specific files obj-$(CONFIG_MACH_SPEAR300) += spear300.o -# spear300 boards files -obj-$(CONFIG_BOARD_SPEAR300_EVB) += spear300_evb.o - - # spear310 specific files obj-$(CONFIG_MACH_SPEAR310) += spear310.o -# spear310 boards files -obj-$(CONFIG_BOARD_SPEAR310_EVB) += spear310_evb.o - - # spear320 specific files obj-$(CONFIG_MACH_SPEAR320) += spear320.o - -# spear320 boards files -obj-$(CONFIG_BOARD_SPEAR320_EVB) += spear320_evb.o diff --git a/arch/arm/mach-spear3xx/Makefile.boot b/arch/arm/mach-spear3xx/Makefile.boot index 4674a4c..d93e217 100644 --- a/arch/arm/mach-spear3xx/Makefile.boot +++ b/arch/arm/mach-spear3xx/Makefile.boot @@ -1,3 +1,7 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb +dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb +dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb diff --git a/arch/arm/mach-spear3xx/clock.c b/arch/arm/mach-spear3xx/clock.c index 6c4841f..cd6c110 100644 --- a/arch/arm/mach-spear3xx/clock.c +++ b/arch/arm/mach-spear3xx/clock.c @@ -11,12 +11,112 @@ * warranty of any kind, whether express or implied. */ +#include <linux/clkdev.h> #include <linux/init.h> #include <linux/io.h> #include <linux/kernel.h> +#include <linux/of_platform.h> #include <asm/mach-types.h> #include <plat/clock.h> #include <mach/misc_regs.h> +#include <mach/spear.h> + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL1_MOD (MISC_BASE + 0x010) +#define PLL2_CTR (MISC_BASE + 0x014) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ (MISC_BASE + 0x018) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD (MISC_BASE + 0x01C) +#define PLL_CLK_CFG (MISC_BASE + 0x020) +#define CORE_CLK_CFG (MISC_BASE + 0x024) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) +/* PERIP_CLK_CFG register masks */ +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 11 +#define GPT2_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) +/* PERIP1_CLK_ENB register masks */ +#define UART_CLK_ENB 3 +#define SSP_CLK_ENB 5 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FIRDA_CLK_ENB 10 +#define GPT1_CLK_ENB 11 +#define GPT2_CLK_ENB 12 +#define ADC_CLK_ENB 15 +#define RTC_CLK_ENB 17 +#define GPIO_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH_CLK_ENB 25 +#define C3_CLK_ENB 31 + +#define RAS_CLK_ENB (MISC_BASE + 0x034) + +#define PRSC1_CLK_CFG (MISC_BASE + 0x044) +#define PRSC2_CLK_CFG (MISC_BASE + 0x048) +#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG (MISC_BASE + 0x050) +#define EXPI_CLK_CFG (MISC_BASE + 0x054) +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) +#define RAS2_CLK_SYNT (MISC_BASE + 0x070) +#define RAS3_CLK_SYNT (MISC_BASE + 0x074) +#define RAS4_CLK_SYNT (MISC_BASE + 0x078) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF /* root clks */ /* 32 KHz oscillator clock */ @@ -411,6 +511,21 @@ static struct clk usbd_clk = { .recalc = &follow_parent, }; +/* clock derived from usbh clk */ +/* usbh0 clock */ +static struct clk usbh0_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &usbh_clk, + .recalc = &follow_parent, +}; + +/* usbh1 clock */ +static struct clk usbh1_clk = { + .flags = ALWAYS_ENABLED, + .pclk = &usbh_clk, + .recalc = &follow_parent, +}; + /* clock derived from ahb clk */ /* apb masks structure */ static struct bus_clk_masks apb_masks = { @@ -652,109 +767,126 @@ static struct clk pwm_clk = { /* array of all spear 3xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, + CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_24m_clk", .clk = &osc_24m_clk}, + CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), + CLKDEV_INIT(NULL, "osc_24m_clk", &osc_24m_clk), /* clock derived from 32 KHz osc clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, + CLKDEV_INIT("fc900000.rtc", NULL, &rtc_clk), /* clock derived from 24 MHz osc clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, + CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), + CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), + CLKDEV_INIT("fc880000.wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt1_synth_clk", .clk = &gpt1_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .dev_id = "uart", .clk = &uart_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, + CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), + CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), + CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), + CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), + CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), + CLKDEV_INIT(NULL, "gpt1_synth_clk", &gpt1_synth_clk), + CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), + CLKDEV_INIT("d0000000.serial", NULL, &uart_clk), + CLKDEV_INIT("firda", NULL, &firda_clk), + CLKDEV_INIT("gpt0", NULL, &gpt0_clk), + CLKDEV_INIT("gpt1", NULL, &gpt1_clk), + CLKDEV_INIT("gpt2", NULL, &gpt2_clk), /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh_clk", .clk = &usbh_clk}, + CLKDEV_INIT("designware_udc", NULL, &usbd_clk), + CLKDEV_INIT(NULL, "usbh_clk", &usbh_clk), + /* clock derived from usbh clk */ + CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), + CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "i2c_designware.0", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "c3", .clk = &c3_clk}, + CLKDEV_INIT(NULL, "apb_clk", &apb_clk), + CLKDEV_INIT("d0180000.i2c", NULL, &i2c_clk), + CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), + CLKDEV_INIT("jpeg", NULL, &jpeg_clk), + CLKDEV_INIT("e0800000.eth", NULL, &gmac_clk), + CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), + CLKDEV_INIT("c3", NULL, &c3_clk), /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "gpio", .clk = &gpio_clk}, + CLKDEV_INIT("adc", NULL, &adc_clk), + CLKDEV_INIT("d0100000.spi", NULL, &ssp0_clk), + CLKDEV_INIT("fc980000.gpio", NULL, &gpio_clk), }; /* array of all spear 300 clock lookups */ #ifdef CONFIG_MACH_SPEAR300 static struct clk_lookup spear300_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "gpio1", .clk = &gpio1_clk}, - { .dev_id = "keyboard", .clk = &kbd_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, + CLKDEV_INIT("60000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("94000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a9000000.gpio", NULL, &gpio1_clk), + CLKDEV_INIT("a0000000.kbd", NULL, &kbd_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), }; + +void __init spear300_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear300_clk_lookups); i++) + clk_register(&spear300_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 310 clock lookups */ #ifdef CONFIG_MACH_SPEAR310 static struct clk_lookup spear310_clk_lookups[] = { - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, - { .dev_id = "uart3", .clk = &uart3_clk}, - { .dev_id = "uart4", .clk = &uart4_clk}, - { .dev_id = "uart5", .clk = &uart5_clk}, + CLKDEV_INIT("44000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT(NULL, "emi", &emi_clk), + CLKDEV_INIT("b2000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("b2080000.serial", NULL, &uart2_clk), + CLKDEV_INIT("b2100000.serial", NULL, &uart3_clk), + CLKDEV_INIT("b2180000.serial", NULL, &uart4_clk), + CLKDEV_INIT("b2200000.serial", NULL, &uart5_clk), }; + +void __init spear310_clk_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) + clk_register(&spear_clk_lookups[i]); + + for (i = 0; i < ARRAY_SIZE(spear310_clk_lookups); i++) + clk_register(&spear310_clk_lookups[i]); + + clk_init(); +} #endif /* array of all spear 320 clock lookups */ #ifdef CONFIG_MACH_SPEAR320 static struct clk_lookup spear320_clk_lookups[] = { - { .dev_id = "clcd", .clk = &clcd_clk}, - { .con_id = "fsmc", .clk = &fsmc_clk}, - { .dev_id = "i2c_designware.1", .clk = &i2c1_clk}, - { .con_id = "emi", .clk = &emi_clk}, - { .dev_id = "pwm", .clk = &pwm_clk}, - { .dev_id = "sdhci", .clk = &sdhci_clk}, - { .dev_id = "c_can_platform.0", .clk = &can0_clk}, - { .dev_id = "c_can_platform.1", .clk = &can1_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "uart1", .clk = &uart1_clk}, - { .dev_id = "uart2", .clk = &uart2_clk}, -}; -#endif - -void __init spear3xx_clk_init(void) + CLKDEV_INIT("90000000.clcd", NULL, &clcd_clk), + CLKDEV_INIT("4c000000.flash", NULL, &fsmc_clk), + CLKDEV_INIT("a7000000.i2c", NULL, &i2c1_clk), + CLKDEV_INIT(NULL, "emi", &emi_clk), + CLKDEV_INIT("pwm", NULL, &pwm_clk), + CLKDEV_INIT("70000000.sdhci", NULL, &sdhci_clk), + CLKDEV_INIT("c_can_platform.0", NULL, &can0_clk), + CLKDEV_INIT("c_can_platform.1", NULL, &can1_clk), + CLKDEV_INIT("a5000000.spi", NULL, &ssp1_clk), + CLKDEV_INIT("a6000000.spi", NULL, &ssp2_clk), + CLKDEV_INIT("a3000000.serial", NULL, &uart1_clk), + CLKDEV_INIT("a4000000.serial", NULL, &uart2_clk), +}; + +void __init spear320_clk_init(void) { - int i, cnt; - struct clk_lookup *lookups; - - if (machine_is_spear300()) { - cnt = ARRAY_SIZE(spear300_clk_lookups); - lookups = spear300_clk_lookups; - } else if (machine_is_spear310()) { - cnt = ARRAY_SIZE(spear310_clk_lookups); - lookups = spear310_clk_lookups; - } else { - cnt = ARRAY_SIZE(spear320_clk_lookups); - lookups = spear320_clk_lookups; - } + int i; for (i = 0; i < ARRAY_SIZE(spear_clk_lookups); i++) clk_register(&spear_clk_lookups[i]); - for (i = 0; i < cnt; i++) - clk_register(&lookups[i]); + for (i = 0; i < ARRAY_SIZE(spear320_clk_lookups); i++) + clk_register(&spear320_clk_lookups[i]); clk_init(); } +#endif diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 14276e5..e4f4d72 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -14,6 +14,7 @@ #ifndef __MACH_GENERIC_H #define __MACH_GENERIC_H +#include <linux/amba/pl08x.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/amba/bus.h> @@ -21,26 +22,15 @@ #include <asm/mach/map.h> #include <plat/padmux.h> -/* spear3xx declarations */ -/* - * Each GPT has 2 timer channels - * Following GPT channels will be used as clock source and clockevent - */ -#define SPEAR_GPT0_BASE SPEAR3XX_ML1_TMR_BASE -#define SPEAR_GPT0_CHAN0_IRQ SPEAR3XX_IRQ_CPU_GPT1_1 -#define SPEAR_GPT0_CHAN1_IRQ SPEAR3XX_IRQ_CPU_GPT1_2 - /* Add spear3xx family device structure declarations here */ -extern struct amba_device spear3xx_gpio_device; -extern struct amba_device spear3xx_uart_device; extern struct sys_timer spear3xx_timer; +extern struct pl022_ssp_controller pl022_plat_data; +extern struct pl08x_platform_data pl080_plat_data; /* Add spear3xx family function declarations here */ -void __init spear3xx_clk_init(void); -void __init spear_setup_timer(void); +void __init spear_setup_timer(resource_size_t base, int irq); void __init spear3xx_map_io(void); -void __init spear3xx_init_irq(void); -void __init spear3xx_init(void); +void __init spear3xx_dt_init_irq(void); void spear_restart(char, const char *); @@ -99,9 +89,6 @@ extern struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50; /* spear300 declarations */ #ifdef CONFIG_MACH_SPEAR300 -/* Add spear300 machine device structure declarations here */ -extern struct amba_device spear300_gpio1_device; - /* pad mux modes */ extern struct pmx_mode spear300_nand_mode; extern struct pmx_mode spear300_nor_mode; @@ -133,16 +120,13 @@ extern struct pmx_dev spear300_pmx_telecom_sdhci_4bit; extern struct pmx_dev spear300_pmx_telecom_sdhci_8bit; extern struct pmx_dev spear300_pmx_gpio1; -/* Add spear300 machine function declarations here */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear300 machine declarations here */ +void __init spear300_clk_init(void); #endif /* CONFIG_MACH_SPEAR300 */ /* spear310 declarations */ #ifdef CONFIG_MACH_SPEAR310 -/* Add spear310 machine device structure declarations here */ - /* pad mux devices */ extern struct pmx_dev spear310_pmx_emi_cs_0_1_4_5; extern struct pmx_dev spear310_pmx_emi_cs_2_3; @@ -153,16 +137,13 @@ extern struct pmx_dev spear310_pmx_fsmc; extern struct pmx_dev spear310_pmx_rs485_0_1; extern struct pmx_dev spear310_pmx_tdm0; -/* Add spear310 machine function declarations here */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear310 machine declarations here */ +void __init spear310_clk_init(void); #endif /* CONFIG_MACH_SPEAR310 */ /* spear320 declarations */ #ifdef CONFIG_MACH_SPEAR320 -/* Add spear320 machine device structure declarations here */ - /* pad mux modes */ extern struct pmx_mode spear320_auto_net_smii_mode; extern struct pmx_mode spear320_auto_net_mii_mode; @@ -193,9 +174,8 @@ extern struct pmx_dev spear320_pmx_smii0; extern struct pmx_dev spear320_pmx_smii1; extern struct pmx_dev spear320_pmx_i2c1; -/* Add spear320 machine function declarations here */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count); +/* Add spear320 machine declarations here */ +void __init spear320_clk_init(void); #endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/include/mach/hardware.h b/arch/arm/mach-spear3xx/include/mach/hardware.h index 4660c0d..40a8c17 100644 --- a/arch/arm/mach-spear3xx/include/mach/hardware.h +++ b/arch/arm/mach-spear3xx/include/mach/hardware.h @@ -1,23 +1 @@ -/* - * arch/arm/mach-spear3xx/include/mach/hardware.h - * - * Hardware definitions for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include <plat/hardware.h> -#include <mach/spear.h> - -/* Vitual to physical translation of statically mapped space */ -#define IO_ADDRESS(x) (x | 0xF0000000) - -#endif /* __MACH_HARDWARE_H */ +/* empty */ diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 6e26544..319620a 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -14,141 +14,15 @@ #ifndef __MACH_IRQS_H #define __MACH_IRQS_H -/* SPEAr3xx IRQ definitions */ -#define SPEAR3XX_IRQ_HW_ACCEL_MOD_0 0 +/* FIXME: probe all these from DT */ #define SPEAR3XX_IRQ_INTRCOMM_RAS_ARM 1 #define SPEAR3XX_IRQ_CPU_GPT1_1 2 -#define SPEAR3XX_IRQ_CPU_GPT1_2 3 -#define SPEAR3XX_IRQ_BASIC_GPT1_1 4 -#define SPEAR3XX_IRQ_BASIC_GPT1_2 5 -#define SPEAR3XX_IRQ_BASIC_GPT2_1 6 -#define SPEAR3XX_IRQ_BASIC_GPT2_2 7 -#define SPEAR3XX_IRQ_BASIC_DMA 8 -#define SPEAR3XX_IRQ_BASIC_SMI 9 -#define SPEAR3XX_IRQ_BASIC_RTC 10 -#define SPEAR3XX_IRQ_BASIC_GPIO 11 -#define SPEAR3XX_IRQ_BASIC_WDT 12 -#define SPEAR3XX_IRQ_DDR_CONTROLLER 13 -#define SPEAR3XX_IRQ_SYS_ERROR 14 -#define SPEAR3XX_IRQ_WAKEUP_RCV 15 -#define SPEAR3XX_IRQ_JPEG 16 -#define SPEAR3XX_IRQ_IRDA 17 -#define SPEAR3XX_IRQ_ADC 18 -#define SPEAR3XX_IRQ_UART 19 -#define SPEAR3XX_IRQ_SSP 20 -#define SPEAR3XX_IRQ_I2C 21 -#define SPEAR3XX_IRQ_MAC_1 22 -#define SPEAR3XX_IRQ_MAC_2 23 -#define SPEAR3XX_IRQ_USB_DEV 24 -#define SPEAR3XX_IRQ_USB_H_OHCI_0 25 -#define SPEAR3XX_IRQ_USB_H_EHCI_0 26 -#define SPEAR3XX_IRQ_USB_H_EHCI_1 SPEAR3XX_IRQ_USB_H_EHCI_0 -#define SPEAR3XX_IRQ_USB_H_OHCI_1 27 #define SPEAR3XX_IRQ_GEN_RAS_1 28 #define SPEAR3XX_IRQ_GEN_RAS_2 29 #define SPEAR3XX_IRQ_GEN_RAS_3 30 -#define SPEAR3XX_IRQ_HW_ACCEL_MOD_1 31 #define SPEAR3XX_IRQ_VIC_END 32 - #define SPEAR3XX_VIRQ_START SPEAR3XX_IRQ_VIC_END -/* SPEAr300 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) -#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) -#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) -#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) -#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) -#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) -#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) -#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) -#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM - -/* SPEAr310 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) -#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) -#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) -#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) -#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) -#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) -#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) -#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) -#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) -#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) -#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) - -/* SPEAr320 Virtual irq definitions */ -/* IRQs sharing IRQ_GEN_RAS_1 */ -#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) -#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) -#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) - -/* IRQs sharing IRQ_GEN_RAS_2 */ -#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 - -/* IRQs sharing IRQ_GEN_RAS_3 */ -#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) -#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) -#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) - -/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ -#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) -#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) -#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) -#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) -#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) -#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) -#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) -#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) -#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) -#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) -#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) - -/* - * GPIO pins virtual irqs - * Use the lowest number for the GPIO virtual IRQs base on which subarchs - * we have compiled in - */ -#if defined(CONFIG_MACH_SPEAR310) -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 18) -#elif defined(CONFIG_MACH_SPEAR320) -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 17) -#else -#define SPEAR3XX_GPIO_INT_BASE (SPEAR3XX_VIRQ_START + 9) -#endif - -#define SPEAR300_GPIO1_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) -#define SPEAR3XX_PLGPIO_COUNT 102 - -#if defined(CONFIG_MACH_SPEAR310) || defined(CONFIG_MACH_SPEAR320) -#define SPEAR3XX_PLGPIO_INT_BASE (SPEAR3XX_GPIO_INT_BASE + 8) -#define SPEAR3XX_GPIO_INT_END (SPEAR3XX_PLGPIO_INT_BASE + \ - SPEAR3XX_PLGPIO_COUNT) -#else -#define SPEAR3XX_GPIO_INT_END (SPEAR300_GPIO1_INT_BASE + 8) -#endif - -#define SPEAR3XX_VIRQ_END SPEAR3XX_GPIO_INT_END -#define NR_IRQS SPEAR3XX_VIRQ_END +#define NR_IRQS 160 #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 5bd8cd8..e0ab72e 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -14,151 +14,7 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H -#include <mach/hardware.h> - #define MISC_BASE IOMEM(VA_SPEAR3XX_ICM3_MISC_REG_BASE) - -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 11 -#define GPT2_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART_CLK_ENB 3 -#define SSP_CLK_ENB 5 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FIRDA_CLK_ENB 10 -#define GPT1_CLK_ENB 11 -#define GPT2_CLK_ENB 12 -#define ADC_CLK_ENB 15 -#define RTC_CLK_ENB 17 -#define GPIO_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH_CLK_ENB 25 -#define C3_CLK_ENB 31 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 63fd983..6d4dadc 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -15,60 +15,27 @@ #define __MACH_SPEAR3XX_H #include <asm/memory.h> -#include <mach/spear300.h> -#include <mach/spear310.h> -#include <mach/spear320.h> - -#define SPEAR3XX_ML_SDRAM_BASE UL(0x00000000) - -#define SPEAR3XX_ICM9_BASE UL(0xC0000000) /* ICM1 - Low speed connection */ #define SPEAR3XX_ICM1_2_BASE UL(0xD0000000) +#define VA_SPEAR3XX_ICM1_2_BASE UL(0xFD000000) #define SPEAR3XX_ICM1_UART_BASE UL(0xD0000000) -#define VA_SPEAR3XX_ICM1_UART_BASE IO_ADDRESS(SPEAR3XX_ICM1_UART_BASE) -#define SPEAR3XX_ICM1_ADC_BASE UL(0xD0080000) +#define VA_SPEAR3XX_ICM1_UART_BASE (VA_SPEAR3XX_ICM1_2_BASE | SPEAR3XX_ICM1_UART_BASE) #define SPEAR3XX_ICM1_SSP_BASE UL(0xD0100000) -#define SPEAR3XX_ICM1_I2C_BASE UL(0xD0180000) -#define SPEAR3XX_ICM1_JPEG_BASE UL(0xD0800000) -#define SPEAR3XX_ICM1_IRDA_BASE UL(0xD1000000) -#define SPEAR3XX_ICM1_SRAM_BASE UL(0xD2800000) - -/* ICM2 - Application Subsystem */ -#define SPEAR3XX_ICM2_HWACCEL0_BASE UL(0xD8800000) -#define SPEAR3XX_ICM2_HWACCEL1_BASE UL(0xD9000000) - -/* ICM4 - High Speed Connection */ -#define SPEAR3XX_ICM4_BASE UL(0xE0000000) -#define SPEAR3XX_ICM4_MII_BASE UL(0xE0800000) -#define SPEAR3XX_ICM4_USBD_FIFO_BASE UL(0xE1000000) -#define SPEAR3XX_ICM4_USBD_CSR_BASE UL(0xE1100000) -#define SPEAR3XX_ICM4_USBD_PLDT_BASE UL(0xE1200000) -#define SPEAR3XX_ICM4_USB_EHCI0_1_BASE UL(0xE1800000) -#define SPEAR3XX_ICM4_USB_OHCI0_BASE UL(0xE1900000) -#define SPEAR3XX_ICM4_USB_OHCI1_BASE UL(0xE2100000) -#define SPEAR3XX_ICM4_USB_ARB_BASE UL(0xE2800000) /* ML1 - Multi Layer CPU Subsystem */ #define SPEAR3XX_ICM3_ML1_2_BASE UL(0xF0000000) -#define SPEAR3XX_ML1_TMR_BASE UL(0xF0000000) -#define SPEAR3XX_ML1_VIC_BASE UL(0xF1100000) -#define VA_SPEAR3XX_ML1_VIC_BASE IO_ADDRESS(SPEAR3XX_ML1_VIC_BASE) +#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) +#define SPEAR3XX_CPU_TMR_BASE UL(0xF0000000) /* ICM3 - Basic Subsystem */ -#define SPEAR3XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) +#define VA_SPEAR3XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR3XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR3XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) -#define SPEAR3XX_ICM3_TMR0_BASE UL(0xFC800000) -#define SPEAR3XX_ICM3_WDT_BASE UL(0xFC880000) -#define SPEAR3XX_ICM3_RTC_BASE UL(0xFC900000) -#define SPEAR3XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR3XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR3XX_ICM3_SYS_CTRL_BASE) +#define VA_SPEAR3XX_ICM3_SYS_CTRL_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_SYS_CTRL_BASE) #define SPEAR3XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR3XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR3XX_ICM3_MISC_REG_BASE) -#define SPEAR3XX_ICM3_TMR1_BASE UL(0xFCB00000) +#define VA_SPEAR3XX_ICM3_MISC_REG_BASE (VA_SPEAR3XX_ICM3_SMI_CTRL_BASE | SPEAR3XX_ICM3_MISC_REG_BASE) /* Debug uart for linux, will be used for debug and uncompress messages */ #define SPEAR_DBG_UART_BASE SPEAR3XX_ICM1_UART_BASE diff --git a/arch/arm/mach-spear3xx/include/mach/spear300.h b/arch/arm/mach-spear3xx/include/mach/spear300.h deleted file mode 100644 index 3b6ea07..0000000 --- a/arch/arm/mach-spear3xx/include/mach/spear300.h +++ /dev/null @@ -1,54 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear300.h - * - * SPEAr300 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR300 - -#ifndef __MACH_SPEAR300_H -#define __MACH_SPEAR300_H - -/* Base address of various IPs */ -#define SPEAR300_TELECOM_BASE UL(0x50000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR300_INT_ENB_MASK_REG 0x54 -#define SPEAR300_INT_STS_MASK_REG 0x58 -#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) -#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) -#define SPEAR300_I2S_IRQ_MASK (1 << 2) -#define SPEAR300_TDM_IRQ_MASK (1 << 3) -#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) -#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) -#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) -#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) -#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) - -#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF - -#define SPEAR300_CLCD_BASE UL(0x60000000) -#define SPEAR300_SDHCI_BASE UL(0x70000000) -#define SPEAR300_NAND_0_BASE UL(0x80000000) -#define SPEAR300_NAND_1_BASE UL(0x84000000) -#define SPEAR300_NAND_2_BASE UL(0x88000000) -#define SPEAR300_NAND_3_BASE UL(0x8c000000) -#define SPEAR300_NOR_0_BASE UL(0x90000000) -#define SPEAR300_NOR_1_BASE UL(0x91000000) -#define SPEAR300_NOR_2_BASE UL(0x92000000) -#define SPEAR300_NOR_3_BASE UL(0x93000000) -#define SPEAR300_FSMC_BASE UL(0x94000000) -#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) -#define SPEAR300_KEYBOARD_BASE UL(0xA0000000) -#define SPEAR300_GPIO_BASE UL(0xA9000000) - -#endif /* __MACH_SPEAR300_H */ - -#endif /* CONFIG_MACH_SPEAR300 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear310.h b/arch/arm/mach-spear3xx/include/mach/spear310.h deleted file mode 100644 index 1567d0da..0000000 --- a/arch/arm/mach-spear3xx/include/mach/spear310.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear310.h - * - * SPEAr310 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR310 - -#ifndef __MACH_SPEAR310_H -#define __MACH_SPEAR310_H - -#define SPEAR310_NAND_BASE UL(0x40000000) -#define SPEAR310_FSMC_BASE UL(0x44000000) -#define SPEAR310_UART1_BASE UL(0xB2000000) -#define SPEAR310_UART2_BASE UL(0xB2080000) -#define SPEAR310_UART3_BASE UL(0xB2100000) -#define SPEAR310_UART4_BASE UL(0xB2180000) -#define SPEAR310_UART5_BASE UL(0xB2200000) -#define SPEAR310_HDLC_BASE UL(0xB2800000) -#define SPEAR310_RS485_0_BASE UL(0xB3000000) -#define SPEAR310_RS485_1_BASE UL(0xB3800000) -#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR310_INT_STS_MASK_REG 0x04 -#define SPEAR310_SMII0_IRQ_MASK (1 << 0) -#define SPEAR310_SMII1_IRQ_MASK (1 << 1) -#define SPEAR310_SMII2_IRQ_MASK (1 << 2) -#define SPEAR310_SMII3_IRQ_MASK (1 << 3) -#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) -#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) -#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) -#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) -#define SPEAR310_UART1_IRQ_MASK (1 << 8) -#define SPEAR310_UART2_IRQ_MASK (1 << 9) -#define SPEAR310_UART3_IRQ_MASK (1 << 10) -#define SPEAR310_UART4_IRQ_MASK (1 << 11) -#define SPEAR310_UART5_IRQ_MASK (1 << 12) -#define SPEAR310_EMI_IRQ_MASK (1 << 13) -#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) -#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) -#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) - -#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF -#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 -#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 -#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 - -#endif /* __MACH_SPEAR310_H */ - -#endif /* CONFIG_MACH_SPEAR310 */ diff --git a/arch/arm/mach-spear3xx/include/mach/spear320.h b/arch/arm/mach-spear3xx/include/mach/spear320.h deleted file mode 100644 index 8cfa83f..0000000 --- a/arch/arm/mach-spear3xx/include/mach/spear320.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/spear320.h - * - * SPEAr320 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR320 - -#ifndef __MACH_SPEAR320_H -#define __MACH_SPEAR320_H - -#define SPEAR320_EMI_CTRL_BASE UL(0x40000000) -#define SPEAR320_FSMC_BASE UL(0x4C000000) -#define SPEAR320_NAND_BASE UL(0x50000000) -#define SPEAR320_I2S_BASE UL(0x60000000) -#define SPEAR320_SDHCI_BASE UL(0x70000000) -#define SPEAR320_CLCD_BASE UL(0x90000000) -#define SPEAR320_PAR_PORT_BASE UL(0xA0000000) -#define SPEAR320_CAN0_BASE UL(0xA1000000) -#define SPEAR320_CAN1_BASE UL(0xA2000000) -#define SPEAR320_UART1_BASE UL(0xA3000000) -#define SPEAR320_UART2_BASE UL(0xA4000000) -#define SPEAR320_SSP0_BASE UL(0xA5000000) -#define SPEAR320_SSP1_BASE UL(0xA6000000) -#define SPEAR320_I2C_BASE UL(0xA7000000) -#define SPEAR320_PWM_BASE UL(0xA8000000) -#define SPEAR320_SMII0_BASE UL(0xAA000000) -#define SPEAR320_SMII1_BASE UL(0xAB000000) -#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) - -/* Interrupt registers offsets and masks */ -#define SPEAR320_INT_STS_MASK_REG 0x04 -#define SPEAR320_INT_CLR_MASK_REG 0x04 -#define SPEAR320_INT_ENB_MASK_REG 0x08 -#define SPEAR320_GPIO_IRQ_MASK (1 << 0) -#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) -#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) -#define SPEAR320_EMI_IRQ_MASK (1 << 7) -#define SPEAR320_CLCD_IRQ_MASK (1 << 8) -#define SPEAR320_SPP_IRQ_MASK (1 << 9) -#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) -#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) -#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) -#define SPEAR320_UART1_IRQ_MASK (1 << 13) -#define SPEAR320_UART2_IRQ_MASK (1 << 14) -#define SPEAR320_SSP1_IRQ_MASK (1 << 15) -#define SPEAR320_SSP2_IRQ_MASK (1 << 16) -#define SPEAR320_SMII0_IRQ_MASK (1 << 17) -#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) -#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) -#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) -#define SPEAR320_I2C1_IRQ_MASK (1 << 21) - -#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 -#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 -#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 - -#endif /* __MACH_SPEAR320_H */ - -#endif /* CONFIG_MACH_SPEAR320 */ diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f7db668..febcdd8 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -3,21 +3,62 @@ * * SPEAr300 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/types.h> -#include <linux/amba/pl061.h> -#include <linux/ptrace.h> -#include <asm/irq.h> +#define pr_fmt(fmt) "SPEAr300: " fmt + +#include <linux/amba/pl08x.h> +#include <linux/of_platform.h> +#include <asm/hardware/vic.h> +#include <asm/mach/arch.h> #include <plat/shirq.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> + +/* Base address of various IPs */ +#define SPEAR300_TELECOM_BASE UL(0x50000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR300_INT_ENB_MASK_REG 0x54 +#define SPEAR300_INT_STS_MASK_REG 0x58 +#define SPEAR300_IT_PERS_S_IRQ_MASK (1 << 0) +#define SPEAR300_IT_CHANGE_S_IRQ_MASK (1 << 1) +#define SPEAR300_I2S_IRQ_MASK (1 << 2) +#define SPEAR300_TDM_IRQ_MASK (1 << 3) +#define SPEAR300_CAMERA_L_IRQ_MASK (1 << 4) +#define SPEAR300_CAMERA_F_IRQ_MASK (1 << 5) +#define SPEAR300_CAMERA_V_IRQ_MASK (1 << 6) +#define SPEAR300_KEYBOARD_IRQ_MASK (1 << 7) +#define SPEAR300_GPIO1_IRQ_MASK (1 << 8) + +#define SPEAR300_SHIRQ_RAS1_MASK 0x1FF + +#define SPEAR300_SOC_CONFIG_BASE UL(0x99000000) + + +/* SPEAr300 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR300_VIRQ_IT_PERS_S (SPEAR3XX_VIRQ_START + 0) +#define SPEAR300_VIRQ_IT_CHANGE_S (SPEAR3XX_VIRQ_START + 1) +#define SPEAR300_VIRQ_I2S (SPEAR3XX_VIRQ_START + 2) +#define SPEAR300_VIRQ_TDM (SPEAR3XX_VIRQ_START + 3) +#define SPEAR300_VIRQ_CAMERA_L (SPEAR3XX_VIRQ_START + 4) +#define SPEAR300_VIRQ_CAMERA_F (SPEAR3XX_VIRQ_START + 5) +#define SPEAR300_VIRQ_CAMERA_V (SPEAR3XX_VIRQ_START + 6) +#define SPEAR300_VIRQ_KEYBOARD (SPEAR3XX_VIRQ_START + 7) +#define SPEAR300_VIRQ_GPIO1 (SPEAR3XX_VIRQ_START + 8) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR300_IRQ_CLCD SPEAR3XX_IRQ_GEN_RAS_3 + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR300_IRQ_SDHCI SPEAR3XX_IRQ_INTRCOMM_RAS_ARM /* pad multiplexing support */ /* muxing registers */ @@ -423,45 +464,275 @@ static struct spear_shirq shirq_ras1 = { }, }; -/* Add spear300 specific devices here */ -/* arm gpio1 device registration */ -static struct pl061_platform_data gpio1_plat_data = { - .gpio_base = 8, - .irq_base = SPEAR300_GPIO1_INT_BASE, +/* padmux devices to enable */ +static struct pmx_dev *spear300_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp_cs, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear300 specific devices */ + &spear300_pmx_fsmc_2_chips, + &spear300_pmx_clcd, + &spear300_pmx_telecom_sdhci_4bit, + &spear300_pmx_gpio1, }; -AMBA_APB_DEVICE(spear300_gpio1, "gpio1", 0, SPEAR300_GPIO_BASE, - {SPEAR300_VIRQ_GPIO1}, &gpio1_plat_data); +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear300_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, +}; -/* spear300 routines */ -void __init spear300_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr300 auxdata to pass platform data */ +static struct of_dev_auxdata spear300_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + {} +}; + +static void __init spear300_dt_init(void) { - int ret = 0; + int ret = -EINVAL; + + pl080_plat_data.slave_channels = spear300_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear300_dma_info); - /* call spear3xx family common init function */ - spear3xx_init(); + of_platform_populate(NULL, of_default_bus_match_table, + spear300_auxdata_lookup, NULL); /* shared irq registration */ shirq_ras1.regs.base = ioremap(SPEAR300_TELECOM_BASE, SZ_4K); if (shirq_ras1.regs.base) { ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ\n"); + pr_err("Error registering Shared IRQ\n"); } - /* pmx initialization */ - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; + if (of_machine_is_compatible("st,spear300-evb")) { + /* pmx initialization */ + pmx_driver.mode = &spear300_photo_frame_mode; + pmx_driver.devs = spear300_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear300_evb_pmx_devs); + + pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); + if (pmx_driver.base) { + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); + /* Free Mapping, device selection already done */ + iounmap(pmx_driver.base); + } - pmx_driver.base = ioremap(SPEAR300_SOC_CONFIG_BASE, SZ_4K); - if (pmx_driver.base) { - ret = pmx_register(&pmx_driver); if (ret) - printk(KERN_ERR "padmux: registration failed. err no" - ": %d\n", ret); - /* Free Mapping, device selection already done */ - iounmap(pmx_driver.base); + pr_err("Initialization Failed"); } } + +static const char * const spear300_dt_board_compat[] = { + "st,spear300", + "st,spear300-evb", + NULL, +}; + +static void __init spear300_map_io(void) +{ + spear3xx_map_io(); + spear300_clk_init(); +} + +DT_MACHINE_START(SPEAR300_DT, "ST SPEAr300 SoC with Flattened Device Tree") + .map_io = spear300_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear300_dt_init, + .restart = spear_restart, + .dt_compat = spear300_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear300_evb.c b/arch/arm/mach-spear3xx/spear300_evb.c deleted file mode 100644 index 3462ab9..0000000 --- a/arch/arm/mach-spear3xx/spear300_evb.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear300_evb.c - * - * SPEAr300 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp_cs, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear300 specific devices */ - &spear300_pmx_fsmc_2_chips, - &spear300_pmx_clcd, - &spear300_pmx_telecom_sdhci_4bit, - &spear300_pmx_gpio1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear300 specific devices */ - &spear300_gpio1_device, -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear300 specific devices */ -}; - -static void __init spear300_evb_init(void) -{ - unsigned int i; - - /* call spear300 machine init function */ - spear300_init(&spear300_photo_frame_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR300, "ST-SPEAR300-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear300_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index febaa6f..b26e415 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -3,19 +3,84 @@ * * SPEAr310 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/ptrace.h> -#include <asm/irq.h> +#define pr_fmt(fmt) "SPEAr310: " fmt + +#include <linux/amba/pl08x.h> +#include <linux/amba/serial.h> +#include <linux/of_platform.h> +#include <asm/hardware/vic.h> +#include <asm/mach/arch.h> #include <plat/shirq.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> + +#define SPEAR310_UART1_BASE UL(0xB2000000) +#define SPEAR310_UART2_BASE UL(0xB2080000) +#define SPEAR310_UART3_BASE UL(0xB2100000) +#define SPEAR310_UART4_BASE UL(0xB2180000) +#define SPEAR310_UART5_BASE UL(0xB2200000) +#define SPEAR310_SOC_CONFIG_BASE UL(0xB4000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR310_INT_STS_MASK_REG 0x04 +#define SPEAR310_SMII0_IRQ_MASK (1 << 0) +#define SPEAR310_SMII1_IRQ_MASK (1 << 1) +#define SPEAR310_SMII2_IRQ_MASK (1 << 2) +#define SPEAR310_SMII3_IRQ_MASK (1 << 3) +#define SPEAR310_WAKEUP_SMII0_IRQ_MASK (1 << 4) +#define SPEAR310_WAKEUP_SMII1_IRQ_MASK (1 << 5) +#define SPEAR310_WAKEUP_SMII2_IRQ_MASK (1 << 6) +#define SPEAR310_WAKEUP_SMII3_IRQ_MASK (1 << 7) +#define SPEAR310_UART1_IRQ_MASK (1 << 8) +#define SPEAR310_UART2_IRQ_MASK (1 << 9) +#define SPEAR310_UART3_IRQ_MASK (1 << 10) +#define SPEAR310_UART4_IRQ_MASK (1 << 11) +#define SPEAR310_UART5_IRQ_MASK (1 << 12) +#define SPEAR310_EMI_IRQ_MASK (1 << 13) +#define SPEAR310_TDM_HDLC_IRQ_MASK (1 << 14) +#define SPEAR310_RS485_0_IRQ_MASK (1 << 15) +#define SPEAR310_RS485_1_IRQ_MASK (1 << 16) + +#define SPEAR310_SHIRQ_RAS1_MASK 0x000FF +#define SPEAR310_SHIRQ_RAS2_MASK 0x01F00 +#define SPEAR310_SHIRQ_RAS3_MASK 0x02000 +#define SPEAR310_SHIRQ_INTRCOMM_RAS_MASK 0x1C000 + +/* SPEAr310 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR310_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 0) +#define SPEAR310_VIRQ_SMII1 (SPEAR3XX_VIRQ_START + 1) +#define SPEAR310_VIRQ_SMII2 (SPEAR3XX_VIRQ_START + 2) +#define SPEAR310_VIRQ_SMII3 (SPEAR3XX_VIRQ_START + 3) +#define SPEAR310_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 4) +#define SPEAR310_VIRQ_WAKEUP_SMII1 (SPEAR3XX_VIRQ_START + 5) +#define SPEAR310_VIRQ_WAKEUP_SMII2 (SPEAR3XX_VIRQ_START + 6) +#define SPEAR310_VIRQ_WAKEUP_SMII3 (SPEAR3XX_VIRQ_START + 7) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define SPEAR310_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR310_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR310_VIRQ_UART3 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR310_VIRQ_UART4 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR310_VIRQ_UART5 (SPEAR3XX_VIRQ_START + 12) + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR310_VIRQ_EMI (SPEAR3XX_VIRQ_START + 13) +#define SPEAR310_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 14) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR310_VIRQ_TDM_HDLC (SPEAR3XX_VIRQ_START + 15) +#define SPEAR310_VIRQ_RS485_0 (SPEAR3XX_VIRQ_START + 16) +#define SPEAR310_VIRQ_RS485_1 (SPEAR3XX_VIRQ_START + 17) + /* pad multiplexing support */ /* muxing registers */ @@ -255,17 +320,271 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear310 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear310_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_gpio_pin0, + &spear3xx_pmx_gpio_pin1, + &spear3xx_pmx_gpio_pin2, + &spear3xx_pmx_gpio_pin3, + &spear3xx_pmx_gpio_pin4, + &spear3xx_pmx_gpio_pin5, + &spear3xx_pmx_uart0, + + /* spear310 specific devices */ + &spear310_pmx_emi_cs_0_1_4_5, + &spear310_pmx_emi_cs_2_3, + &spear310_pmx_uart1, + &spear310_pmx_uart2, + &spear310_pmx_uart3_4_5, + &spear310_pmx_fsmc, + &spear310_pmx_rs485_0_1, + &spear310_pmx_tdm0, +}; -/* spear310 routines */ -void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear310_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart2_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart2_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart3_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart3_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart4_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart4_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart5_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart5_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, +}; + +/* uart devices plat data */ +static struct amba_pl011_data spear310_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart3_tx", + .dma_rx_param = "uart3_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart4_tx", + .dma_rx_param = "uart4_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart5_tx", + .dma_rx_param = "uart5_rx", + }, +}; + +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear310_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART1_BASE, NULL, + &spear310_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART2_BASE, NULL, + &spear310_uart_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART3_BASE, NULL, + &spear310_uart_data[2]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART4_BASE, NULL, + &spear310_uart_data[3]), + OF_DEV_AUXDATA("arm,pl011", SPEAR310_UART5_BASE, NULL, + &spear310_uart_data[4]), + {} +}; + +static void __init spear310_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + pl080_plat_data.slave_channels = spear310_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear310_dma_info); + + of_platform_populate(NULL, of_default_bus_match_table, + spear310_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR310_SOC_CONFIG_BASE, SZ_4K); @@ -274,35 +593,59 @@ void __init spear310_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, shirq_ras1.regs.base = base; ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 1\n"); + pr_err("Error registering Shared IRQ 1\n"); /* shirq 2 */ shirq_ras2.regs.base = base; ret = spear_shirq_register(&shirq_ras2); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 2\n"); + pr_err("Error registering Shared IRQ 2\n"); /* shirq 3 */ shirq_ras3.regs.base = base; ret = spear_shirq_register(&shirq_ras3); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 3\n"); + pr_err("Error registering Shared IRQ 3\n"); /* shirq 4 */ shirq_intrcomm_ras.regs.base = base; ret = spear_shirq_register(&shirq_intrcomm_ras); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 4\n"); + pr_err("Error registering Shared IRQ 4\n"); + } + + if (of_machine_is_compatible("st,spear310-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = NULL; + pmx_driver.devs = spear310_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear310_evb_pmx_devs); + + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); } +} - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; +static const char * const spear310_dt_board_compat[] = { + "st,spear310", + "st,spear310-evb", + NULL, +}; - ret = pmx_register(&pmx_driver); - if (ret) - printk(KERN_ERR "padmux: registration failed. err no: %d\n", - ret); +static void __init spear310_map_io(void) +{ + spear3xx_map_io(); + spear310_clk_init(); } + +DT_MACHINE_START(SPEAR310_DT, "ST SPEAr310 SoC with Flattened Device Tree") + .map_io = spear310_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear310_dt_init, + .restart = spear_restart, + .dt_compat = spear310_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear310_evb.c b/arch/arm/mach-spear3xx/spear310_evb.c deleted file mode 100644 index f92c499..0000000 --- a/arch/arm/mach-spear3xx/spear310_evb.c +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear310_evb.c - * - * SPEAr310 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_gpio_pin0, - &spear3xx_pmx_gpio_pin1, - &spear3xx_pmx_gpio_pin2, - &spear3xx_pmx_gpio_pin3, - &spear3xx_pmx_gpio_pin4, - &spear3xx_pmx_gpio_pin5, - &spear3xx_pmx_uart0, - - /* spear310 specific devices */ - &spear310_pmx_emi_cs_0_1_4_5, - &spear310_pmx_emi_cs_2_3, - &spear310_pmx_uart1, - &spear310_pmx_uart2, - &spear310_pmx_uart3_4_5, - &spear310_pmx_fsmc, - &spear310_pmx_rs485_0_1, - &spear310_pmx_tdm0, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear310 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear310 specific devices */ -}; - -static void __init spear310_evb_init(void) -{ - unsigned int i; - - /* call spear310 machine init function */ - spear310_init(NULL, pmx_devs, ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR310, "ST-SPEAR310-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear310_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index deaaf19..2f5979b 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -3,19 +3,85 @@ * * SPEAr320 machine source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/ptrace.h> -#include <asm/irq.h> +#define pr_fmt(fmt) "SPEAr320: " fmt + +#include <linux/amba/pl022.h> +#include <linux/amba/pl08x.h> +#include <linux/amba/serial.h> +#include <linux/of_platform.h> +#include <asm/hardware/vic.h> +#include <asm/mach/arch.h> #include <plat/shirq.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> + +#define SPEAR320_UART1_BASE UL(0xA3000000) +#define SPEAR320_UART2_BASE UL(0xA4000000) +#define SPEAR320_SSP0_BASE UL(0xA5000000) +#define SPEAR320_SSP1_BASE UL(0xA6000000) +#define SPEAR320_SOC_CONFIG_BASE UL(0xB3000000) + +/* Interrupt registers offsets and masks */ +#define SPEAR320_INT_STS_MASK_REG 0x04 +#define SPEAR320_INT_CLR_MASK_REG 0x04 +#define SPEAR320_INT_ENB_MASK_REG 0x08 +#define SPEAR320_GPIO_IRQ_MASK (1 << 0) +#define SPEAR320_I2S_PLAY_IRQ_MASK (1 << 1) +#define SPEAR320_I2S_REC_IRQ_MASK (1 << 2) +#define SPEAR320_EMI_IRQ_MASK (1 << 7) +#define SPEAR320_CLCD_IRQ_MASK (1 << 8) +#define SPEAR320_SPP_IRQ_MASK (1 << 9) +#define SPEAR320_SDHCI_IRQ_MASK (1 << 10) +#define SPEAR320_CAN_U_IRQ_MASK (1 << 11) +#define SPEAR320_CAN_L_IRQ_MASK (1 << 12) +#define SPEAR320_UART1_IRQ_MASK (1 << 13) +#define SPEAR320_UART2_IRQ_MASK (1 << 14) +#define SPEAR320_SSP1_IRQ_MASK (1 << 15) +#define SPEAR320_SSP2_IRQ_MASK (1 << 16) +#define SPEAR320_SMII0_IRQ_MASK (1 << 17) +#define SPEAR320_MII1_SMII1_IRQ_MASK (1 << 18) +#define SPEAR320_WAKEUP_SMII0_IRQ_MASK (1 << 19) +#define SPEAR320_WAKEUP_MII1_SMII1_IRQ_MASK (1 << 20) +#define SPEAR320_I2C1_IRQ_MASK (1 << 21) + +#define SPEAR320_SHIRQ_RAS1_MASK 0x000380 +#define SPEAR320_SHIRQ_RAS3_MASK 0x000007 +#define SPEAR320_SHIRQ_INTRCOMM_RAS_MASK 0x3FF800 + +/* SPEAr320 Virtual irq definitions */ +/* IRQs sharing IRQ_GEN_RAS_1 */ +#define SPEAR320_VIRQ_EMI (SPEAR3XX_VIRQ_START + 0) +#define SPEAR320_VIRQ_CLCD (SPEAR3XX_VIRQ_START + 1) +#define SPEAR320_VIRQ_SPP (SPEAR3XX_VIRQ_START + 2) + +/* IRQs sharing IRQ_GEN_RAS_2 */ +#define SPEAR320_IRQ_SDHCI SPEAR3XX_IRQ_GEN_RAS_2 + +/* IRQs sharing IRQ_GEN_RAS_3 */ +#define SPEAR320_VIRQ_PLGPIO (SPEAR3XX_VIRQ_START + 3) +#define SPEAR320_VIRQ_I2S_PLAY (SPEAR3XX_VIRQ_START + 4) +#define SPEAR320_VIRQ_I2S_REC (SPEAR3XX_VIRQ_START + 5) + +/* IRQs sharing IRQ_INTRCOMM_RAS_ARM */ +#define SPEAR320_VIRQ_CANU (SPEAR3XX_VIRQ_START + 6) +#define SPEAR320_VIRQ_CANL (SPEAR3XX_VIRQ_START + 7) +#define SPEAR320_VIRQ_UART1 (SPEAR3XX_VIRQ_START + 8) +#define SPEAR320_VIRQ_UART2 (SPEAR3XX_VIRQ_START + 9) +#define SPEAR320_VIRQ_SSP1 (SPEAR3XX_VIRQ_START + 10) +#define SPEAR320_VIRQ_SSP2 (SPEAR3XX_VIRQ_START + 11) +#define SPEAR320_VIRQ_SMII0 (SPEAR3XX_VIRQ_START + 12) +#define SPEAR320_VIRQ_MII1_SMII1 (SPEAR3XX_VIRQ_START + 13) +#define SPEAR320_VIRQ_WAKEUP_SMII0 (SPEAR3XX_VIRQ_START + 14) +#define SPEAR320_VIRQ_WAKEUP_MII1_SMII1 (SPEAR3XX_VIRQ_START + 15) +#define SPEAR320_VIRQ_I2C1 (SPEAR3XX_VIRQ_START + 16) /* pad multiplexing support */ /* muxing registers */ @@ -508,17 +574,271 @@ static struct spear_shirq shirq_intrcomm_ras = { }, }; -/* Add spear320 specific devices here */ +/* padmux devices to enable */ +static struct pmx_dev *spear320_evb_pmx_devs[] = { + /* spear3xx specific devices */ + &spear3xx_pmx_i2c, + &spear3xx_pmx_ssp, + &spear3xx_pmx_mii, + &spear3xx_pmx_uart0, + + /* spear320 specific devices */ + &spear320_pmx_fsmc, + &spear320_pmx_sdhci, + &spear320_pmx_i2s, + &spear320_pmx_uart1, + &spear320_pmx_uart2, + &spear320_pmx_can, + &spear320_pmx_pwm0, + &spear320_pmx_pwm1, + &spear320_pmx_pwm2, + &spear320_pmx_mii1, +}; + +/* DMAC platform data's slave info */ +struct pl08x_channel_data spear320_dma_info[] = { + { + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c0_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c0_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart1_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "uart2_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c1_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c1_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c2_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2c2_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "i2s_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "rs485_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "rs485_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, +}; + +static struct pl022_ssp_controller spear320_ssp_data[] = { + { + .bus_id = 1, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp1_tx", + .dma_rx_param = "ssp1_rx", + .num_chipselect = 2, + }, { + .bus_id = 2, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp2_tx", + .dma_rx_param = "ssp2_rx", + .num_chipselect = 2, + } +}; + +static struct amba_pl011_data spear320_uart_data[] = { + { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart1_tx", + .dma_rx_param = "uart1_rx", + }, { + .dma_filter = pl08x_filter_id, + .dma_tx_param = "uart2_tx", + .dma_rx_param = "uart2_rx", + }, +}; -/* spear320 routines */ -void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, - u8 pmx_dev_count) +/* Add SPEAr310 auxdata to pass platform data */ +static struct of_dev_auxdata spear320_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl022", SPEAR3XX_ICM1_SSP_BASE, NULL, + &pl022_plat_data), + OF_DEV_AUXDATA("arm,pl080", SPEAR3XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP0_BASE, NULL, + &spear320_ssp_data[0]), + OF_DEV_AUXDATA("arm,pl022", SPEAR320_SSP1_BASE, NULL, + &spear320_ssp_data[1]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART1_BASE, NULL, + &spear320_uart_data[0]), + OF_DEV_AUXDATA("arm,pl011", SPEAR320_UART2_BASE, NULL, + &spear320_uart_data[1]), + {} +}; + +static void __init spear320_dt_init(void) { void __iomem *base; int ret = 0; - /* call spear3xx family common init function */ - spear3xx_init(); + pl080_plat_data.slave_channels = spear320_dma_info; + pl080_plat_data.num_slave_channels = ARRAY_SIZE(spear320_dma_info); + + of_platform_populate(NULL, of_default_bus_match_table, + spear320_auxdata_lookup, NULL); /* shared irq registration */ base = ioremap(SPEAR320_SOC_CONFIG_BASE, SZ_4K); @@ -527,29 +847,53 @@ void __init spear320_init(struct pmx_mode *pmx_mode, struct pmx_dev **pmx_devs, shirq_ras1.regs.base = base; ret = spear_shirq_register(&shirq_ras1); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 1\n"); + pr_err("Error registering Shared IRQ 1\n"); /* shirq 3 */ shirq_ras3.regs.base = base; ret = spear_shirq_register(&shirq_ras3); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 3\n"); + pr_err("Error registering Shared IRQ 3\n"); /* shirq 4 */ shirq_intrcomm_ras.regs.base = base; ret = spear_shirq_register(&shirq_intrcomm_ras); if (ret) - printk(KERN_ERR "Error registering Shared IRQ 4\n"); + pr_err("Error registering Shared IRQ 4\n"); + } + + if (of_machine_is_compatible("st,spear320-evb")) { + /* pmx initialization */ + pmx_driver.base = base; + pmx_driver.mode = &spear320_auto_net_mii_mode; + pmx_driver.devs = spear320_evb_pmx_devs; + pmx_driver.devs_count = ARRAY_SIZE(spear320_evb_pmx_devs); + + ret = pmx_register(&pmx_driver); + if (ret) + pr_err("padmux: registration failed. err no: %d\n", + ret); } +} - /* pmx initialization */ - pmx_driver.base = base; - pmx_driver.mode = pmx_mode; - pmx_driver.devs = pmx_devs; - pmx_driver.devs_count = pmx_dev_count; +static const char * const spear320_dt_board_compat[] = { + "st,spear320", + "st,spear320-evb", + NULL, +}; - ret = pmx_register(&pmx_driver); - if (ret) - printk(KERN_ERR "padmux: registration failed. err no: %d\n", - ret); +static void __init spear320_map_io(void) +{ + spear3xx_map_io(); + spear320_clk_init(); } + +DT_MACHINE_START(SPEAR320_DT, "ST SPEAr320 SoC with Flattened Device Tree") + .map_io = spear320_map_io, + .init_irq = spear3xx_dt_init_irq, + .handle_irq = vic_handle_irq, + .timer = &spear3xx_timer, + .init_machine = spear320_dt_init, + .restart = spear_restart, + .dt_compat = spear320_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear320_evb.c b/arch/arm/mach-spear3xx/spear320_evb.c deleted file mode 100644 index 105334a..0000000 --- a/arch/arm/mach-spear3xx/spear320_evb.c +++ /dev/null @@ -1,79 +0,0 @@ -/* - * arch/arm/mach-spear3xx/spear320_evb.c - * - * SPEAr320 evaluation board source file - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <asm/hardware/vic.h> -#include <asm/mach/arch.h> -#include <asm/mach-types.h> -#include <mach/generic.h> -#include <mach/hardware.h> - -/* padmux devices to enable */ -static struct pmx_dev *pmx_devs[] = { - /* spear3xx specific devices */ - &spear3xx_pmx_i2c, - &spear3xx_pmx_ssp, - &spear3xx_pmx_mii, - &spear3xx_pmx_uart0, - - /* spear320 specific devices */ - &spear320_pmx_fsmc, - &spear320_pmx_sdhci, - &spear320_pmx_i2s, - &spear320_pmx_uart1, - &spear320_pmx_uart2, - &spear320_pmx_can, - &spear320_pmx_pwm0, - &spear320_pmx_pwm1, - &spear320_pmx_pwm2, - &spear320_pmx_mii1, -}; - -static struct amba_device *amba_devs[] __initdata = { - /* spear3xx specific devices */ - &spear3xx_gpio_device, - &spear3xx_uart_device, - - /* spear320 specific devices */ -}; - -static struct platform_device *plat_devs[] __initdata = { - /* spear3xx specific devices */ - - /* spear320 specific devices */ -}; - -static void __init spear320_evb_init(void) -{ - unsigned int i; - - /* call spear320 machine init function */ - spear320_init(&spear320_auto_net_mii_mode, pmx_devs, - ARRAY_SIZE(pmx_devs)); - - /* Add Platform Devices */ - platform_add_devices(plat_devs, ARRAY_SIZE(plat_devs)); - - /* Add Amba Devices */ - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) - amba_device_register(amba_devs[i], &iomem_resource); -} - -MACHINE_START(SPEAR320, "ST-SPEAR320-EVB") - .atag_offset = 0x100, - .map_io = spear3xx_map_io, - .init_irq = spear3xx_init_irq, - .handle_irq = vic_handle_irq, - .timer = &spear3xx_timer, - .init_machine = spear320_evb_init, - .restart = spear_restart, -MACHINE_END diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index b1733c3..bbb11ef 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -3,83 +3,25 @@ * * SPEAr3XX machines common source file * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Copyright (C) 2009-2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#include <linux/types.h> -#include <linux/amba/pl061.h> -#include <linux/ptrace.h> +#define pr_fmt(fmt) "SPEAr3xx: " fmt + +#include <linux/amba/pl022.h> +#include <linux/amba/pl08x.h> +#include <linux/of_irq.h> #include <linux/io.h> +#include <asm/hardware/pl080.h> #include <asm/hardware/vic.h> -#include <asm/irq.h> -#include <asm/mach/arch.h> +#include <plat/pl080.h> #include <mach/generic.h> -#include <mach/hardware.h> - -/* Add spear3xx machines common devices here */ -/* gpio device registration */ -static struct pl061_platform_data gpio_plat_data = { - .gpio_base = 0, - .irq_base = SPEAR3XX_GPIO_INT_BASE, -}; - -AMBA_APB_DEVICE(spear3xx_gpio, "gpio", 0, SPEAR3XX_ICM3_GPIO_BASE, - {SPEAR3XX_IRQ_BASIC_GPIO}, &gpio_plat_data); - -/* uart device registration */ -AMBA_APB_DEVICE(spear3xx_uart, "uart", 0, SPEAR3XX_ICM1_UART_BASE, - {SPEAR3XX_IRQ_UART}, NULL); - -/* Do spear3xx familiy common initialization part here */ -void __init spear3xx_init(void) -{ - /* nothing to do for now */ -} - -/* This will initialize vic */ -void __init spear3xx_init_irq(void) -{ - vic_init((void __iomem *)VA_SPEAR3XX_ML1_VIC_BASE, 0, ~0, 0); -} - -/* Following will create static virtual/physical mappings */ -struct map_desc spear3xx_io_desc[] __initdata = { - { - .virtual = VA_SPEAR3XX_ICM1_UART_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM1_UART_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ML1_VIC_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ML1_VIC_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_SYS_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SYS_CTRL_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = VA_SPEAR3XX_ICM3_MISC_REG_BASE, - .pfn = __phys_to_pfn(SPEAR3XX_ICM3_MISC_REG_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, -}; - -/* This will create static memory mapping for selected devices */ -void __init spear3xx_map_io(void) -{ - iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); - - /* This will initialize clock framework */ - spear3xx_clk_init(); -} +#include <mach/spear.h> /* pad multiplexing support */ /* devices */ @@ -506,6 +448,68 @@ struct pmx_dev spear3xx_pmx_plgpio_45_46_49_50 = { }; #endif /* CONFIG_MACH_SPEAR310 || CONFIG_MACH_SPEAR320 */ +/* ssp device registration */ +struct pl022_ssp_controller pl022_plat_data = { + .bus_id = 0, + .enable_dma = 1, + .dma_filter = pl08x_filter_id, + .dma_tx_param = "ssp0_tx", + .dma_rx_param = "ssp0_rx", + /* + * This is number of spi devices that can be connected to spi. There are + * two type of chipselects on which slave devices can work. One is chip + * select provided by spi masters other is controlled through external + * gpio's. We can't use chipselect provided from spi master (because as + * soon as FIFO becomes empty, CS is disabled and transfer ends). So + * this number now depends on number of gpios available for spi. each + * slave on each master requires a separate gpio pin. + */ + .num_chipselect = 2, +}; + +/* dmac device registration */ +struct pl08x_platform_data pl080_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl080_get_signal, + .put_signal = pl080_put_signal, +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear3xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR3XX_ICM1_2_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM1_2_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR3XX_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR3XX_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, + .type = MT_DEVICE + }, +}; + +/* This will create static memory mapping for selected devices */ +void __init spear3xx_map_io(void) +{ + iotable_init(spear3xx_io_desc, ARRAY_SIZE(spear3xx_io_desc)); +} + static void __init spear3xx_timer_init(void) { char pclk_name[] = "pll3_48m_clk"; @@ -530,9 +534,19 @@ static void __init spear3xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(); + spear_setup_timer(SPEAR3XX_CPU_TMR_BASE, SPEAR3XX_IRQ_CPU_GPT1_1); } struct sys_timer spear3xx_timer = { .init = spear3xx_timer_init, }; + +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,pl190-vic", .data = vic_of_init, }, + { /* Sentinel */ } +}; + +void __init spear3xx_dt_init_irq(void) +{ + of_irq_init(vic_of_match); +} diff --git a/arch/arm/mach-spear6xx/Makefile.boot b/arch/arm/mach-spear6xx/Makefile.boot index 4674a4c..af493da 100644 --- a/arch/arm/mach-spear6xx/Makefile.boot +++ b/arch/arm/mach-spear6xx/Makefile.boot @@ -1,3 +1,5 @@ zreladdr-y += 0x00008000 params_phys-y := 0x00000100 initrd_phys-y := 0x00800000 + +dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb diff --git a/arch/arm/mach-spear6xx/clock.c b/arch/arm/mach-spear6xx/clock.c index a86499a..bef77d4 100644 --- a/arch/arm/mach-spear6xx/clock.c +++ b/arch/arm/mach-spear6xx/clock.c @@ -16,6 +16,112 @@ #include <linux/kernel.h> #include <plat/clock.h> #include <mach/misc_regs.h> +#include <mach/spear.h> + +#define PLL1_CTR (MISC_BASE + 0x008) +#define PLL1_FRQ (MISC_BASE + 0x00C) +#define PLL1_MOD (MISC_BASE + 0x010) +#define PLL2_CTR (MISC_BASE + 0x014) +/* PLL_CTR register masks */ +#define PLL_ENABLE 2 +#define PLL_MODE_SHIFT 4 +#define PLL_MODE_MASK 0x3 +#define PLL_MODE_NORMAL 0 +#define PLL_MODE_FRACTION 1 +#define PLL_MODE_DITH_DSB 2 +#define PLL_MODE_DITH_SSB 3 + +#define PLL2_FRQ (MISC_BASE + 0x018) +/* PLL FRQ register masks */ +#define PLL_DIV_N_SHIFT 0 +#define PLL_DIV_N_MASK 0xFF +#define PLL_DIV_P_SHIFT 8 +#define PLL_DIV_P_MASK 0x7 +#define PLL_NORM_FDBK_M_SHIFT 24 +#define PLL_NORM_FDBK_M_MASK 0xFF +#define PLL_DITH_FDBK_M_SHIFT 16 +#define PLL_DITH_FDBK_M_MASK 0xFFFF + +#define PLL2_MOD (MISC_BASE + 0x01C) +#define PLL_CLK_CFG (MISC_BASE + 0x020) +#define CORE_CLK_CFG (MISC_BASE + 0x024) +/* CORE CLK CFG register masks */ +#define PLL_HCLK_RATIO_SHIFT 10 +#define PLL_HCLK_RATIO_MASK 0x3 +#define HCLK_PCLK_RATIO_SHIFT 8 +#define HCLK_PCLK_RATIO_MASK 0x3 + +#define PERIP_CLK_CFG (MISC_BASE + 0x028) +/* PERIP_CLK_CFG register masks */ +#define CLCD_CLK_SHIFT 2 +#define CLCD_CLK_MASK 0x3 +#define UART_CLK_SHIFT 4 +#define UART_CLK_MASK 0x1 +#define FIRDA_CLK_SHIFT 5 +#define FIRDA_CLK_MASK 0x3 +#define GPT0_CLK_SHIFT 8 +#define GPT1_CLK_SHIFT 10 +#define GPT2_CLK_SHIFT 11 +#define GPT3_CLK_SHIFT 12 +#define GPT_CLK_MASK 0x1 +#define AUX_CLK_PLL3_VAL 0 +#define AUX_CLK_PLL1_VAL 1 + +#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) +/* PERIP1_CLK_ENB register masks */ +#define UART0_CLK_ENB 3 +#define UART1_CLK_ENB 4 +#define SSP0_CLK_ENB 5 +#define SSP1_CLK_ENB 6 +#define I2C_CLK_ENB 7 +#define JPEG_CLK_ENB 8 +#define FSMC_CLK_ENB 9 +#define FIRDA_CLK_ENB 10 +#define GPT2_CLK_ENB 11 +#define GPT3_CLK_ENB 12 +#define GPIO2_CLK_ENB 13 +#define SSP2_CLK_ENB 14 +#define ADC_CLK_ENB 15 +#define GPT1_CLK_ENB 11 +#define RTC_CLK_ENB 17 +#define GPIO1_CLK_ENB 18 +#define DMA_CLK_ENB 19 +#define SMI_CLK_ENB 21 +#define CLCD_CLK_ENB 22 +#define GMAC_CLK_ENB 23 +#define USBD_CLK_ENB 24 +#define USBH0_CLK_ENB 25 +#define USBH1_CLK_ENB 26 + +#define PRSC1_CLK_CFG (MISC_BASE + 0x044) +#define PRSC2_CLK_CFG (MISC_BASE + 0x048) +#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) +/* gpt synthesizer register masks */ +#define GPT_MSCALE_SHIFT 0 +#define GPT_MSCALE_MASK 0xFFF +#define GPT_NSCALE_SHIFT 12 +#define GPT_NSCALE_MASK 0xF + +#define AMEM_CLK_CFG (MISC_BASE + 0x050) +#define EXPI_CLK_CFG (MISC_BASE + 0x054) +#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) +#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) +#define UART_CLK_SYNT (MISC_BASE + 0x064) +#define GMAC_CLK_SYNT (MISC_BASE + 0x068) +#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) +#define RAS2_CLK_SYNT (MISC_BASE + 0x070) +#define RAS3_CLK_SYNT (MISC_BASE + 0x074) +#define RAS4_CLK_SYNT (MISC_BASE + 0x078) +/* aux clk synthesiser register masks for irda to ras4 */ +#define AUX_SYNT_ENB 31 +#define AUX_EQ_SEL_SHIFT 30 +#define AUX_EQ_SEL_MASK 1 +#define AUX_EQ1_SEL 0 +#define AUX_EQ2_SEL 1 +#define AUX_XSCALE_SHIFT 16 +#define AUX_XSCALE_MASK 0xFFF +#define AUX_YSCALE_SHIFT 0 +#define AUX_YSCALE_MASK 0xFFF /* root clks */ /* 32 KHz oscillator clock */ @@ -623,53 +729,53 @@ static struct clk dummy_apb_pclk; /* array of all spear 6xx clock lookups */ static struct clk_lookup spear_clk_lookups[] = { - { .con_id = "apb_pclk", .clk = &dummy_apb_pclk}, + CLKDEV_INIT(NULL, "apb_pclk", &dummy_apb_pclk), /* root clks */ - { .con_id = "osc_32k_clk", .clk = &osc_32k_clk}, - { .con_id = "osc_30m_clk", .clk = &osc_30m_clk}, + CLKDEV_INIT(NULL, "osc_32k_clk", &osc_32k_clk), + CLKDEV_INIT(NULL, "osc_30m_clk", &osc_30m_clk), /* clock derived from 32 KHz os clk */ - { .dev_id = "rtc-spear", .clk = &rtc_clk}, + CLKDEV_INIT("rtc-spear", NULL, &rtc_clk), /* clock derived from 30 MHz os clk */ - { .con_id = "pll1_clk", .clk = &pll1_clk}, - { .con_id = "pll3_48m_clk", .clk = &pll3_48m_clk}, - { .dev_id = "wdt", .clk = &wdt_clk}, + CLKDEV_INIT(NULL, "pll1_clk", &pll1_clk), + CLKDEV_INIT(NULL, "pll3_48m_clk", &pll3_48m_clk), + CLKDEV_INIT("wdt", NULL, &wdt_clk), /* clock derived from pll1 clk */ - { .con_id = "cpu_clk", .clk = &cpu_clk}, - { .con_id = "ahb_clk", .clk = &ahb_clk}, - { .con_id = "uart_synth_clk", .clk = &uart_synth_clk}, - { .con_id = "firda_synth_clk", .clk = &firda_synth_clk}, - { .con_id = "clcd_synth_clk", .clk = &clcd_synth_clk}, - { .con_id = "gpt0_synth_clk", .clk = &gpt0_synth_clk}, - { .con_id = "gpt2_synth_clk", .clk = &gpt2_synth_clk}, - { .con_id = "gpt3_synth_clk", .clk = &gpt3_synth_clk}, - { .dev_id = "d0000000.serial", .clk = &uart0_clk}, - { .dev_id = "d0080000.serial", .clk = &uart1_clk}, - { .dev_id = "firda", .clk = &firda_clk}, - { .dev_id = "clcd", .clk = &clcd_clk}, - { .dev_id = "gpt0", .clk = &gpt0_clk}, - { .dev_id = "gpt1", .clk = &gpt1_clk}, - { .dev_id = "gpt2", .clk = &gpt2_clk}, - { .dev_id = "gpt3", .clk = &gpt3_clk}, + CLKDEV_INIT(NULL, "cpu_clk", &cpu_clk), + CLKDEV_INIT(NULL, "ahb_clk", &ahb_clk), + CLKDEV_INIT(NULL, "uart_synth_clk", &uart_synth_clk), + CLKDEV_INIT(NULL, "firda_synth_clk", &firda_synth_clk), + CLKDEV_INIT(NULL, "clcd_synth_clk", &clcd_synth_clk), + CLKDEV_INIT(NULL, "gpt0_synth_clk", &gpt0_synth_clk), + CLKDEV_INIT(NULL, "gpt2_synth_clk", &gpt2_synth_clk), + CLKDEV_INIT(NULL, "gpt3_synth_clk", &gpt3_synth_clk), + CLKDEV_INIT("d0000000.serial", NULL, &uart0_clk), + CLKDEV_INIT("d0080000.serial", NULL, &uart1_clk), + CLKDEV_INIT("firda", NULL, &firda_clk), + CLKDEV_INIT("clcd", NULL, &clcd_clk), + CLKDEV_INIT("gpt0", NULL, &gpt0_clk), + CLKDEV_INIT("gpt1", NULL, &gpt1_clk), + CLKDEV_INIT("gpt2", NULL, &gpt2_clk), + CLKDEV_INIT("gpt3", NULL, &gpt3_clk), /* clock derived from pll3 clk */ - { .dev_id = "designware_udc", .clk = &usbd_clk}, - { .con_id = "usbh.0_clk", .clk = &usbh0_clk}, - { .con_id = "usbh.1_clk", .clk = &usbh1_clk}, + CLKDEV_INIT("designware_udc", NULL, &usbd_clk), + CLKDEV_INIT(NULL, "usbh.0_clk", &usbh0_clk), + CLKDEV_INIT(NULL, "usbh.1_clk", &usbh1_clk), /* clock derived from ahb clk */ - { .con_id = "apb_clk", .clk = &apb_clk}, - { .dev_id = "d0200000.i2c", .clk = &i2c_clk}, - { .dev_id = "dma", .clk = &dma_clk}, - { .dev_id = "jpeg", .clk = &jpeg_clk}, - { .dev_id = "gmac", .clk = &gmac_clk}, - { .dev_id = "smi", .clk = &smi_clk}, - { .dev_id = "fsmc-nand", .clk = &fsmc_clk}, + CLKDEV_INIT(NULL, "apb_clk", &apb_clk), + CLKDEV_INIT("d0200000.i2c", NULL, &i2c_clk), + CLKDEV_INIT("fc400000.dma", NULL, &dma_clk), + CLKDEV_INIT("jpeg", NULL, &jpeg_clk), + CLKDEV_INIT("gmac", NULL, &gmac_clk), + CLKDEV_INIT("fc000000.flash", NULL, &smi_clk), + CLKDEV_INIT("d1800000.flash", NULL, &fsmc_clk), /* clock derived from apb clk */ - { .dev_id = "adc", .clk = &adc_clk}, - { .dev_id = "ssp-pl022.0", .clk = &ssp0_clk}, - { .dev_id = "ssp-pl022.1", .clk = &ssp1_clk}, - { .dev_id = "ssp-pl022.2", .clk = &ssp2_clk}, - { .dev_id = "f0100000.gpio", .clk = &gpio0_clk}, - { .dev_id = "fc980000.gpio", .clk = &gpio1_clk}, - { .dev_id = "d8100000.gpio", .clk = &gpio2_clk}, + CLKDEV_INIT("adc", NULL, &adc_clk), + CLKDEV_INIT("ssp-pl022.0", NULL, &ssp0_clk), + CLKDEV_INIT("ssp-pl022.1", NULL, &ssp1_clk), + CLKDEV_INIT("ssp-pl022.2", NULL, &ssp2_clk), + CLKDEV_INIT("f0100000.gpio", NULL, &gpio0_clk), + CLKDEV_INIT("fc980000.gpio", NULL, &gpio1_clk), + CLKDEV_INIT("d8100000.gpio", NULL, &gpio2_clk), }; void __init spear6xx_clk_init(void) diff --git a/arch/arm/mach-spear6xx/include/mach/generic.h b/arch/arm/mach-spear6xx/include/mach/generic.h index 116b993..7167fd3 100644 --- a/arch/arm/mach-spear6xx/include/mach/generic.h +++ b/arch/arm/mach-spear6xx/include/mach/generic.h @@ -15,34 +15,9 @@ #define __MACH_GENERIC_H #include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/amba/bus.h> -#include <asm/mach/time.h> -#include <asm/mach/map.h> - -/* - * Each GPT has 2 timer channels - * Following GPT channels will be used as clock source and clockevent - */ -#define SPEAR_GPT0_BASE SPEAR6XX_CPU_TMR_BASE -#define SPEAR_GPT0_CHAN0_IRQ IRQ_CPU_GPT1_1 -#define SPEAR_GPT0_CHAN1_IRQ IRQ_CPU_GPT1_2 - -/* Add spear6xx family device structure declarations here */ -extern struct amba_device gpio_device[]; -extern struct amba_device uart_device[]; -extern struct sys_timer spear6xx_timer; - -/* Add spear6xx family function declarations here */ -void __init spear_setup_timer(void); -void __init spear6xx_map_io(void); -void __init spear6xx_init_irq(void); -void __init spear6xx_init(void); -void __init spear600_init(void); -void __init spear6xx_clk_init(void); +void __init spear_setup_timer(resource_size_t base, int irq); void spear_restart(char, const char *); - -/* Add spear600 machine device structure declarations here */ +void __init spear6xx_clk_init(void); #endif /* __MACH_GENERIC_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/hardware.h b/arch/arm/mach-spear6xx/include/mach/hardware.h index 0b3f96a..40a8c17 100644 --- a/arch/arm/mach-spear6xx/include/mach/hardware.h +++ b/arch/arm/mach-spear6xx/include/mach/hardware.h @@ -1,23 +1 @@ -/* - * arch/arm/mach-spear6xx/include/mach/hardware.h - * - * Hardware definitions for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Rajeev Kumar<rajeev-dlh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include <plat/hardware.h> -#include <mach/spear.h> - -/* Vitual to physical translation of statically mapped space */ -#define IO_ADDRESS(x) (x | 0xF0000000) - -#endif /* __MACH_HARDWARE_H */ +/* empty */ diff --git a/arch/arm/mach-spear6xx/include/mach/irqs.h b/arch/arm/mach-spear6xx/include/mach/irqs.h index 8f214b0..2b73538 100644 --- a/arch/arm/mach-spear6xx/include/mach/irqs.h +++ b/arch/arm/mach-spear6xx/include/mach/irqs.h @@ -16,82 +16,13 @@ /* IRQ definitions */ /* VIC 1 */ -#define IRQ_INTRCOMM_SW_IRQ 0 -#define IRQ_INTRCOMM_CPU_1 1 -#define IRQ_INTRCOMM_CPU_2 2 -#define IRQ_INTRCOMM_RAS2A11_1 3 -#define IRQ_INTRCOMM_RAS2A11_2 4 -#define IRQ_INTRCOMM_RAS2A12_1 5 -#define IRQ_INTRCOMM_RAS2A12_2 6 -#define IRQ_GEN_RAS_0 7 -#define IRQ_GEN_RAS_1 8 -#define IRQ_GEN_RAS_2 9 -#define IRQ_GEN_RAS_3 10 -#define IRQ_GEN_RAS_4 11 -#define IRQ_GEN_RAS_5 12 -#define IRQ_GEN_RAS_6 13 -#define IRQ_GEN_RAS_7 14 -#define IRQ_GEN_RAS_8 15 +/* FIXME: probe this from DT */ #define IRQ_CPU_GPT1_1 16 -#define IRQ_CPU_GPT1_2 17 -#define IRQ_LOCAL_GPIO 18 -#define IRQ_PLL_UNLOCK 19 -#define IRQ_JPEG 20 -#define IRQ_FSMC 21 -#define IRQ_IRDA 22 -#define IRQ_RESERVED 23 -#define IRQ_UART_0 24 -#define IRQ_UART_1 25 -#define IRQ_SSP_1 26 -#define IRQ_SSP_2 27 -#define IRQ_I2C 28 -#define IRQ_GEN_RAS_9 29 -#define IRQ_GEN_RAS_10 30 -#define IRQ_GEN_RAS_11 31 - -/* VIC 2 */ -#define IRQ_APPL_GPT1_1 32 -#define IRQ_APPL_GPT1_2 33 -#define IRQ_APPL_GPT2_1 34 -#define IRQ_APPL_GPT2_2 35 -#define IRQ_APPL_GPIO 36 -#define IRQ_APPL_SSP 37 -#define IRQ_APPL_ADC 38 -#define IRQ_APPL_RESERVED 39 -#define IRQ_AHB_EXP_MASTER 40 -#define IRQ_DDR_CONTROLLER 41 -#define IRQ_BASIC_DMA 42 -#define IRQ_BASIC_RESERVED1 43 -#define IRQ_BASIC_SMI 44 -#define IRQ_BASIC_CLCD 45 -#define IRQ_EXP_AHB_1 46 -#define IRQ_EXP_AHB_2 47 -#define IRQ_BASIC_GPT1_1 48 -#define IRQ_BASIC_GPT1_2 49 -#define IRQ_BASIC_RTC 50 -#define IRQ_BASIC_GPIO 51 -#define IRQ_BASIC_WDT 52 -#define IRQ_BASIC_RESERVED 53 -#define IRQ_AHB_EXP_SLAVE 54 -#define IRQ_GMAC_1 55 -#define IRQ_GMAC_2 56 -#define IRQ_USB_DEV 57 -#define IRQ_USB_H_OHCI_0 58 -#define IRQ_USB_H_EHCI_0 59 -#define IRQ_USB_H_OHCI_1 60 -#define IRQ_USB_H_EHCI_1 61 -#define IRQ_EXP_AHB_3 62 -#define IRQ_EXP_AHB_4 63 #define IRQ_VIC_END 64 /* GPIO pins virtual irqs */ -#define SPEAR_GPIO_INT_BASE IRQ_VIC_END -#define SPEAR_GPIO0_INT_BASE SPEAR_GPIO_INT_BASE -#define SPEAR_GPIO1_INT_BASE (SPEAR_GPIO0_INT_BASE + 8) -#define SPEAR_GPIO2_INT_BASE (SPEAR_GPIO1_INT_BASE + 8) -#define SPEAR_GPIO_INT_END (SPEAR_GPIO2_INT_BASE + 8) -#define VIRTUAL_IRQS (SPEAR_GPIO_INT_END - IRQ_VIC_END) -#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) +#define VIRTUAL_IRQS 24 +#define NR_IRQS (IRQ_VIC_END + VIRTUAL_IRQS) #endif /* __MACH_IRQS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 68c20a0..2b9aaa6 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -14,161 +14,7 @@ #ifndef __MACH_MISC_REGS_H #define __MACH_MISC_REGS_H -#include <mach/hardware.h> - #define MISC_BASE IOMEM(VA_SPEAR6XX_ICM3_MISC_REG_BASE) - -#define SOC_CFG_CTR (MISC_BASE + 0x000) -#define DIAG_CFG_CTR (MISC_BASE + 0x004) -#define PLL1_CTR (MISC_BASE + 0x008) -#define PLL1_FRQ (MISC_BASE + 0x00C) -#define PLL1_MOD (MISC_BASE + 0x010) -#define PLL2_CTR (MISC_BASE + 0x014) -/* PLL_CTR register masks */ -#define PLL_ENABLE 2 -#define PLL_MODE_SHIFT 4 -#define PLL_MODE_MASK 0x3 -#define PLL_MODE_NORMAL 0 -#define PLL_MODE_FRACTION 1 -#define PLL_MODE_DITH_DSB 2 -#define PLL_MODE_DITH_SSB 3 - -#define PLL2_FRQ (MISC_BASE + 0x018) -/* PLL FRQ register masks */ -#define PLL_DIV_N_SHIFT 0 -#define PLL_DIV_N_MASK 0xFF -#define PLL_DIV_P_SHIFT 8 -#define PLL_DIV_P_MASK 0x7 -#define PLL_NORM_FDBK_M_SHIFT 24 -#define PLL_NORM_FDBK_M_MASK 0xFF -#define PLL_DITH_FDBK_M_SHIFT 16 -#define PLL_DITH_FDBK_M_MASK 0xFFFF - -#define PLL2_MOD (MISC_BASE + 0x01C) -#define PLL_CLK_CFG (MISC_BASE + 0x020) -#define CORE_CLK_CFG (MISC_BASE + 0x024) -/* CORE CLK CFG register masks */ -#define PLL_HCLK_RATIO_SHIFT 10 -#define PLL_HCLK_RATIO_MASK 0x3 -#define HCLK_PCLK_RATIO_SHIFT 8 -#define HCLK_PCLK_RATIO_MASK 0x3 - -#define PERIP_CLK_CFG (MISC_BASE + 0x028) -/* PERIP_CLK_CFG register masks */ -#define CLCD_CLK_SHIFT 2 -#define CLCD_CLK_MASK 0x3 -#define UART_CLK_SHIFT 4 -#define UART_CLK_MASK 0x1 -#define FIRDA_CLK_SHIFT 5 -#define FIRDA_CLK_MASK 0x3 -#define GPT0_CLK_SHIFT 8 -#define GPT1_CLK_SHIFT 10 -#define GPT2_CLK_SHIFT 11 -#define GPT3_CLK_SHIFT 12 -#define GPT_CLK_MASK 0x1 -#define AUX_CLK_PLL3_VAL 0 -#define AUX_CLK_PLL1_VAL 1 - -#define PERIP1_CLK_ENB (MISC_BASE + 0x02C) -/* PERIP1_CLK_ENB register masks */ -#define UART0_CLK_ENB 3 -#define UART1_CLK_ENB 4 -#define SSP0_CLK_ENB 5 -#define SSP1_CLK_ENB 6 -#define I2C_CLK_ENB 7 -#define JPEG_CLK_ENB 8 -#define FSMC_CLK_ENB 9 -#define FIRDA_CLK_ENB 10 -#define GPT2_CLK_ENB 11 -#define GPT3_CLK_ENB 12 -#define GPIO2_CLK_ENB 13 -#define SSP2_CLK_ENB 14 -#define ADC_CLK_ENB 15 -#define GPT1_CLK_ENB 11 -#define RTC_CLK_ENB 17 -#define GPIO1_CLK_ENB 18 -#define DMA_CLK_ENB 19 -#define SMI_CLK_ENB 21 -#define CLCD_CLK_ENB 22 -#define GMAC_CLK_ENB 23 -#define USBD_CLK_ENB 24 -#define USBH0_CLK_ENB 25 -#define USBH1_CLK_ENB 26 - -#define SOC_CORE_ID (MISC_BASE + 0x030) -#define RAS_CLK_ENB (MISC_BASE + 0x034) -#define PERIP1_SOF_RST (MISC_BASE + 0x038) -/* PERIP1_SOF_RST register masks */ -#define JPEG_SOF_RST 8 - -#define SOC_USER_ID (MISC_BASE + 0x03C) -#define RAS_SOF_RST (MISC_BASE + 0x040) -#define PRSC1_CLK_CFG (MISC_BASE + 0x044) -#define PRSC2_CLK_CFG (MISC_BASE + 0x048) -#define PRSC3_CLK_CFG (MISC_BASE + 0x04C) -/* gpt synthesizer register masks */ -#define GPT_MSCALE_SHIFT 0 -#define GPT_MSCALE_MASK 0xFFF -#define GPT_NSCALE_SHIFT 12 -#define GPT_NSCALE_MASK 0xF - -#define AMEM_CLK_CFG (MISC_BASE + 0x050) -#define EXPI_CLK_CFG (MISC_BASE + 0x054) -#define CLCD_CLK_SYNT (MISC_BASE + 0x05C) -#define FIRDA_CLK_SYNT (MISC_BASE + 0x060) -#define UART_CLK_SYNT (MISC_BASE + 0x064) -#define GMAC_CLK_SYNT (MISC_BASE + 0x068) -#define RAS1_CLK_SYNT (MISC_BASE + 0x06C) -#define RAS2_CLK_SYNT (MISC_BASE + 0x070) -#define RAS3_CLK_SYNT (MISC_BASE + 0x074) -#define RAS4_CLK_SYNT (MISC_BASE + 0x078) -/* aux clk synthesiser register masks for irda to ras4 */ -#define AUX_SYNT_ENB 31 -#define AUX_EQ_SEL_SHIFT 30 -#define AUX_EQ_SEL_MASK 1 -#define AUX_EQ1_SEL 0 -#define AUX_EQ2_SEL 1 -#define AUX_XSCALE_SHIFT 16 -#define AUX_XSCALE_MASK 0xFFF -#define AUX_YSCALE_SHIFT 0 -#define AUX_YSCALE_MASK 0xFFF - -#define ICM1_ARB_CFG (MISC_BASE + 0x07C) -#define ICM2_ARB_CFG (MISC_BASE + 0x080) -#define ICM3_ARB_CFG (MISC_BASE + 0x084) -#define ICM4_ARB_CFG (MISC_BASE + 0x088) -#define ICM5_ARB_CFG (MISC_BASE + 0x08C) -#define ICM6_ARB_CFG (MISC_BASE + 0x090) -#define ICM7_ARB_CFG (MISC_BASE + 0x094) -#define ICM8_ARB_CFG (MISC_BASE + 0x098) -#define ICM9_ARB_CFG (MISC_BASE + 0x09C) #define DMA_CHN_CFG (MISC_BASE + 0x0A0) -#define USB2_PHY_CFG (MISC_BASE + 0x0A4) -#define GMAC_CFG_CTR (MISC_BASE + 0x0A8) -#define EXPI_CFG_CTR (MISC_BASE + 0x0AC) -#define PRC1_LOCK_CTR (MISC_BASE + 0x0C0) -#define PRC2_LOCK_CTR (MISC_BASE + 0x0C4) -#define PRC3_LOCK_CTR (MISC_BASE + 0x0C8) -#define PRC4_LOCK_CTR (MISC_BASE + 0x0CC) -#define PRC1_IRQ_CTR (MISC_BASE + 0x0D0) -#define PRC2_IRQ_CTR (MISC_BASE + 0x0D4) -#define PRC3_IRQ_CTR (MISC_BASE + 0x0D8) -#define PRC4_IRQ_CTR (MISC_BASE + 0x0DC) -#define PWRDOWN_CFG_CTR (MISC_BASE + 0x0E0) -#define COMPSSTL_1V8_CFG (MISC_BASE + 0x0E4) -#define COMPSSTL_2V5_CFG (MISC_BASE + 0x0E8) -#define COMPCOR_3V3_CFG (MISC_BASE + 0x0EC) -#define SSTLPAD_CFG_CTR (MISC_BASE + 0x0F0) -#define BIST1_CFG_CTR (MISC_BASE + 0x0F4) -#define BIST2_CFG_CTR (MISC_BASE + 0x0F8) -#define BIST3_CFG_CTR (MISC_BASE + 0x0FC) -#define BIST4_CFG_CTR (MISC_BASE + 0x100) -#define BIST5_CFG_CTR (MISC_BASE + 0x104) -#define BIST1_STS_RES (MISC_BASE + 0x108) -#define BIST2_STS_RES (MISC_BASE + 0x10C) -#define BIST3_STS_RES (MISC_BASE + 0x110) -#define BIST4_STS_RES (MISC_BASE + 0x114) -#define BIST5_STS_RES (MISC_BASE + 0x118) -#define SYSERR_CFG_CTR (MISC_BASE + 0x11C) #endif /* __MACH_MISC_REGS_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/spear.h b/arch/arm/mach-spear6xx/include/mach/spear.h index 7fd6215..d278ed0 100644 --- a/arch/arm/mach-spear6xx/include/mach/spear.h +++ b/arch/arm/mach-spear6xx/include/mach/spear.h @@ -15,69 +15,26 @@ #define __MACH_SPEAR6XX_H #include <asm/memory.h> -#include <mach/spear600.h> -#define SPEAR6XX_ML_SDRAM_BASE UL(0x00000000) /* ICM1 - Low speed connection */ #define SPEAR6XX_ICM1_BASE UL(0xD0000000) - +#define VA_SPEAR6XX_ICM1_BASE UL(0xFD000000) #define SPEAR6XX_ICM1_UART0_BASE UL(0xD0000000) -#define VA_SPEAR6XX_ICM1_UART0_BASE IO_ADDRESS(SPEAR6XX_ICM1_UART0_BASE) - -#define SPEAR6XX_ICM1_UART1_BASE UL(0xD0080000) -#define SPEAR6XX_ICM1_SSP0_BASE UL(0xD0100000) -#define SPEAR6XX_ICM1_SSP1_BASE UL(0xD0180000) -#define SPEAR6XX_ICM1_I2C_BASE UL(0xD0200000) -#define SPEAR6XX_ICM1_JPEG_BASE UL(0xD0800000) -#define SPEAR6XX_ICM1_IRDA_BASE UL(0xD1000000) -#define SPEAR6XX_ICM1_FSMC_BASE UL(0xD1800000) -#define SPEAR6XX_ICM1_NAND_BASE UL(0xD2000000) -#define SPEAR6XX_ICM1_SRAM_BASE UL(0xD2800000) - -/* ICM2 - Application Subsystem */ -#define SPEAR6XX_ICM2_BASE UL(0xD8000000) -#define SPEAR6XX_ICM2_TMR0_BASE UL(0xD8000000) -#define SPEAR6XX_ICM2_TMR1_BASE UL(0xD8080000) -#define SPEAR6XX_ICM2_GPIO_BASE UL(0xD8100000) -#define SPEAR6XX_ICM2_SSP2_BASE UL(0xD8180000) -#define SPEAR6XX_ICM2_ADC_BASE UL(0xD8200000) +#define VA_SPEAR6XX_ICM1_UART0_BASE (VA_SPEAR6XX_ICM1_2_BASE | SPEAR6XX_ICM1_UART0_BASE) /* ML-1, 2 - Multi Layer CPU Subsystem */ #define SPEAR6XX_ML_CPU_BASE UL(0xF0000000) +#define VA_SPEAR6XX_ML_CPU_BASE UL(0xF0000000) #define SPEAR6XX_CPU_TMR_BASE UL(0xF0000000) -#define SPEAR6XX_CPU_GPIO_BASE UL(0xF0100000) -#define SPEAR6XX_CPU_VIC_SEC_BASE UL(0xF1000000) -#define VA_SPEAR6XX_CPU_VIC_SEC_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_SEC_BASE) -#define SPEAR6XX_CPU_VIC_PRI_BASE UL(0xF1100000) -#define VA_SPEAR6XX_CPU_VIC_PRI_BASE IO_ADDRESS(SPEAR6XX_CPU_VIC_PRI_BASE) /* ICM3 - Basic Subsystem */ -#define SPEAR6XX_ICM3_BASE UL(0xF8000000) -#define SPEAR6XX_ICM3_SMEM_BASE UL(0xF8000000) #define SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) -#define SPEAR6XX_ICM3_CLCD_BASE UL(0xFC200000) +#define VA_SPEAR6XX_ICM3_SMI_CTRL_BASE UL(0xFC000000) #define SPEAR6XX_ICM3_DMA_BASE UL(0xFC400000) -#define SPEAR6XX_ICM3_SDRAM_CTRL_BASE UL(0xFC600000) -#define SPEAR6XX_ICM3_TMR_BASE UL(0xFC800000) -#define SPEAR6XX_ICM3_WDT_BASE UL(0xFC880000) -#define SPEAR6XX_ICM3_RTC_BASE UL(0xFC900000) -#define SPEAR6XX_ICM3_GPIO_BASE UL(0xFC980000) #define SPEAR6XX_ICM3_SYS_CTRL_BASE UL(0xFCA00000) -#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE IO_ADDRESS(SPEAR6XX_ICM3_SYS_CTRL_BASE) +#define VA_SPEAR6XX_ICM3_SYS_CTRL_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_SYS_CTRL_BASE) #define SPEAR6XX_ICM3_MISC_REG_BASE UL(0xFCA80000) -#define VA_SPEAR6XX_ICM3_MISC_REG_BASE IO_ADDRESS(SPEAR6XX_ICM3_MISC_REG_BASE) - -/* ICM4 - High Speed Connection */ -#define SPEAR6XX_ICM4_BASE UL(0xE0000000) -#define SPEAR6XX_ICM4_GMAC_BASE UL(0xE0800000) -#define SPEAR6XX_ICM4_USBD_FIFO_BASE UL(0xE1000000) -#define SPEAR6XX_ICM4_USBD_CSR_BASE UL(0xE1100000) -#define SPEAR6XX_ICM4_USBD_PLDT_BASE UL(0xE1200000) -#define SPEAR6XX_ICM4_USB_EHCI0_BASE UL(0xE1800000) -#define SPEAR6XX_ICM4_USB_OHCI0_BASE UL(0xE1900000) -#define SPEAR6XX_ICM4_USB_EHCI1_BASE UL(0xE2000000) -#define SPEAR6XX_ICM4_USB_OHCI1_BASE UL(0xE2100000) -#define SPEAR6XX_ICM4_USB_ARB_BASE UL(0xE2800000) +#define VA_SPEAR6XX_ICM3_MISC_REG_BASE (VA_SPEAR6XX_ICM3_SMI_CTRL_BASE | SPEAR6XX_ICM3_MISC_REG_BASE) /* Debug uart for linux, will be used for debug and uncompress messages */ #define SPEAR_DBG_UART_BASE SPEAR6XX_ICM1_UART0_BASE diff --git a/arch/arm/mach-spear6xx/include/mach/spear600.h b/arch/arm/mach-spear6xx/include/mach/spear600.h deleted file mode 100644 index c068cc5..0000000 --- a/arch/arm/mach-spear6xx/include/mach/spear600.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * arch/arm/mach-spear66xx/include/mach/spear600.h - * - * SPEAr600 Machine specific definition - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifdef CONFIG_MACH_SPEAR600 - -#ifndef __MACH_SPEAR600_H -#define __MACH_SPEAR600_H - -#endif /* __MACH_SPEAR600_H */ - -#endif /* CONFIG_MACH_SPEAR600 */ diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2ed8b14..de194db 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -13,41 +13,404 @@ * warranty of any kind, whether express or implied. */ +#include <linux/amba/pl08x.h> +#include <linux/clk.h> +#include <linux/err.h> #include <linux/of.h> #include <linux/of_address.h> #include <linux/of_irq.h> #include <linux/of_platform.h> +#include <asm/hardware/pl080.h> #include <asm/hardware/vic.h> #include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/mach/map.h> +#include <plat/pl080.h> #include <mach/generic.h> -#include <mach/hardware.h> +#include <mach/spear.h> -/* Following will create static virtual/physical mappings */ -static struct map_desc spear6xx_io_desc[] __initdata = { +/* dmac device registration */ +static struct pl08x_channel_data spear600_dma_info[] = { { - .virtual = VA_SPEAR6XX_ICM1_UART0_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM1_UART0_BASE), - .length = SZ_4K, - .type = MT_DEVICE + .bus_id = "ssp1_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, }, { - .virtual = VA_SPEAR6XX_CPU_VIC_PRI_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_PRI_BASE), - .length = SZ_4K, - .type = MT_DEVICE + .bus_id = "ssp1_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, }, { - .virtual = VA_SPEAR6XX_CPU_VIC_SEC_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_CPU_VIC_SEC_BASE), - .length = SZ_4K, - .type = MT_DEVICE + .bus_id = "uart0_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart0_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "uart1_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp2_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp2_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ssp0_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ssp0_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "i2c_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "irda", + .min_signal = 12, + .max_signal = 12, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "adc", + .min_signal = 13, + .max_signal = 13, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "to_jpeg", + .min_signal = 14, + .max_signal = 14, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "from_jpeg", + .min_signal = 15, + .max_signal = 15, + .muxval = 0, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, }, { - .virtual = VA_SPEAR6XX_ICM3_SYS_CTRL_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SYS_CTRL_BASE), - .length = SZ_4K, + .bus_id = "ras7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ras7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 1, + .cctl = 0, + .periph_buses = PL08X_AHB1, + }, { + .bus_id = "ext0_rx", + .min_signal = 0, + .max_signal = 0, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext0_tx", + .min_signal = 1, + .max_signal = 1, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext1_rx", + .min_signal = 2, + .max_signal = 2, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext1_tx", + .min_signal = 3, + .max_signal = 3, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext2_rx", + .min_signal = 4, + .max_signal = 4, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext2_tx", + .min_signal = 5, + .max_signal = 5, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext3_rx", + .min_signal = 6, + .max_signal = 6, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext3_tx", + .min_signal = 7, + .max_signal = 7, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext4_rx", + .min_signal = 8, + .max_signal = 8, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext4_tx", + .min_signal = 9, + .max_signal = 9, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext5_rx", + .min_signal = 10, + .max_signal = 10, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext5_tx", + .min_signal = 11, + .max_signal = 11, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext6_rx", + .min_signal = 12, + .max_signal = 12, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext6_tx", + .min_signal = 13, + .max_signal = 13, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext7_rx", + .min_signal = 14, + .max_signal = 14, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, { + .bus_id = "ext7_tx", + .min_signal = 15, + .max_signal = 15, + .muxval = 2, + .cctl = 0, + .periph_buses = PL08X_AHB2, + }, +}; + +struct pl08x_platform_data pl080_plat_data = { + .memcpy_channel = { + .bus_id = "memcpy", + .cctl = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT | \ + PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT | \ + PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT | \ + PL080_CONTROL_PROT_BUFF | PL080_CONTROL_PROT_CACHE | \ + PL080_CONTROL_PROT_SYS), + }, + .lli_buses = PL08X_AHB1, + .mem_buses = PL08X_AHB1, + .get_signal = pl080_get_signal, + .put_signal = pl080_put_signal, + .slave_channels = spear600_dma_info, + .num_slave_channels = ARRAY_SIZE(spear600_dma_info), +}; + +/* + * Following will create 16MB static virtual/physical mappings + * PHYSICAL VIRTUAL + * 0xF0000000 0xF0000000 + * 0xF1000000 0xF1000000 + * 0xD0000000 0xFD000000 + * 0xFC000000 0xFC000000 + */ +struct map_desc spear6xx_io_desc[] __initdata = { + { + .virtual = VA_SPEAR6XX_ML_CPU_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ML_CPU_BASE), + .length = 2 * SZ_16M, + .type = MT_DEVICE + }, { + .virtual = VA_SPEAR6XX_ICM1_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM1_BASE), + .length = SZ_16M, .type = MT_DEVICE }, { - .virtual = VA_SPEAR6XX_ICM3_MISC_REG_BASE, - .pfn = __phys_to_pfn(SPEAR6XX_ICM3_MISC_REG_BASE), - .length = SZ_4K, + .virtual = VA_SPEAR6XX_ICM3_SMI_CTRL_BASE, + .pfn = __phys_to_pfn(SPEAR6XX_ICM3_SMI_CTRL_BASE), + .length = SZ_16M, .type = MT_DEVICE }, }; @@ -85,16 +448,24 @@ static void __init spear6xx_timer_init(void) clk_put(gpt_clk); clk_put(pclk); - spear_setup_timer(); + spear_setup_timer(SPEAR6XX_CPU_TMR_BASE, IRQ_CPU_GPT1_1); } struct sys_timer spear6xx_timer = { .init = spear6xx_timer_init, }; +/* Add auxdata to pass platform data */ +struct of_dev_auxdata spear6xx_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,pl080", SPEAR6XX_ICM3_DMA_BASE, NULL, + &pl080_plat_data), + {} +}; + static void __init spear600_dt_init(void) { - of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); + of_platform_populate(NULL, of_default_bus_match_table, + spear6xx_auxdata_lookup, NULL); } static const char *spear600_dt_board_compat[] = { diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 7edef91..7c8a7d8 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -723,7 +723,7 @@ config CPU_HIGH_VECTOR bool "Select the High exception vector" help Say Y here to select high exception vector(0xFFFF0000~). - The exception vector can be vary depending on the platform + The exception vector can vary depending on the platform design in nommu mode. If your platform needs to select high exception vector, say Y. Otherwise or if you are unsure, say N, and the low exception diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 9055b5a..f074675 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -320,7 +320,7 @@ retry: */ perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); - if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (!(fault & VM_FAULT_ERROR) && flags & FAULT_FLAG_ALLOW_RETRY) { if (fault & VM_FAULT_MAJOR) { tsk->maj_flt++; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c index 6486d2f..d51225f 100644 --- a/arch/arm/mm/nommu.c +++ b/arch/arm/mm/nommu.c @@ -13,6 +13,7 @@ #include <asm/sections.h> #include <asm/page.h> #include <asm/setup.h> +#include <asm/traps.h> #include <asm/mach/arch.h> #include "mm.h" @@ -39,6 +40,7 @@ void __init sanity_check_meminfo(void) */ void __init paging_init(struct machine_desc *mdesc) { + early_trap_init((void *)CONFIG_VECTORS_BASE); bootmem_init(); } diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index f1c8486..c2e2b66 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -255,6 +255,18 @@ __v7_setup: mcr p15, 0, r5, c10, c2, 0 @ write PRRR mcr p15, 0, r6, c10, c2, 1 @ write NMRR #endif +#ifndef CONFIG_ARM_THUMBEE + mrc p15, 0, r0, c0, c1, 0 @ read ID_PFR0 for ThumbEE + and r0, r0, #(0xf << 12) @ ThumbEE enabled field + teq r0, #(1 << 12) @ check if ThumbEE is present + bne 1f + mov r5, #0 + mcr p14, 6, r5, c1, c0, 0 @ Initialize TEEHBR to 0 + mrc p14, 6, r0, c0, c0, 0 @ load TEECR + orr r0, r0, #1 @ set the 1st bit in order to + mcr p14, 6, r0, c0, c0, 0 @ stop userspace TEEHBR access +1: +#endif adr r5, v7_crval ldmia r5, {r5, r6} #ifdef CONFIG_CPU_ENDIAN_BE8 diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 8506cbb..62ec5c4 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -398,32 +398,6 @@ struct clk dummy_ck = { .ops = &clkops_null, }; -#ifdef CONFIG_CPU_FREQ -void clk_init_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_init_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_init_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} - -void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table) -{ - unsigned long flags; - - if (!arch_clock || !arch_clock->clk_exit_cpufreq_table) - return; - - spin_lock_irqsave(&clockfw_lock, flags); - arch_clock->clk_exit_cpufreq_table(table); - spin_unlock_irqrestore(&clockfw_lock, flags); -} -#endif - /* * */ diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 240a7b9..d0ef57c 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -272,8 +272,6 @@ struct clk { #endif }; -struct cpufreq_frequency_table; - struct clk_functions { int (*clk_enable)(struct clk *clk); void (*clk_disable)(struct clk *clk); @@ -283,10 +281,6 @@ struct clk_functions { void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); -#ifdef CONFIG_CPU_FREQ - void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); - void (*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **); -#endif }; extern int mpurate; @@ -301,10 +295,6 @@ extern void recalculate_root_clocks(void); extern unsigned long followparent_recalc(struct clk *clk); extern void clk_enable_init_clocks(void); unsigned long omap_fixed_divisor_recalc(struct clk *clk); -#ifdef CONFIG_CPU_FREQ -extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table); -extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table); -#endif extern struct clk *omap_clk_get_by_name(const char *name); extern int omap_clk_enable_autoidle_all(void); extern int omap_clk_disable_autoidle_all(void); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 71553f4..a0ffc77d 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -302,6 +302,7 @@ comment "Power management" config SAMSUNG_PM_DEBUG bool "S3C2410 PM Suspend debug" depends on PM + select DEBUG_LL help Say Y here if you want verbose debugging from the PM Suspend and Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt> diff --git a/arch/arm/plat-spear/Kconfig b/arch/arm/plat-spear/Kconfig index 1bb3dbc..6c066fc 100644 --- a/arch/arm/plat-spear/Kconfig +++ b/arch/arm/plat-spear/Kconfig @@ -9,9 +9,10 @@ choice default ARCH_SPEAR3XX config ARCH_SPEAR3XX - bool "SPEAr3XX" + bool "ST SPEAr3xx with Device Tree" select ARM_VIC select CPU_ARM926T + select USE_OF help Supports for ARM's SPEAR3XX family diff --git a/arch/arm/plat-spear/Makefile b/arch/arm/plat-spear/Makefile index e0f2e5b..4af6258 100644 --- a/arch/arm/plat-spear/Makefile +++ b/arch/arm/plat-spear/Makefile @@ -3,6 +3,6 @@ # # Common support -obj-y := clock.o restart.o time.o +obj-y := clock.o restart.o time.o pl080.o obj-$(CONFIG_ARCH_SPEAR3XX) += shirq.o padmux.o diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index 02b160a..ab3de72 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -12,7 +12,7 @@ */ #include <linux/amba/serial.h> -#include <mach/hardware.h> +#include <mach/spear.h> .macro addruart, rp, rv, tmp mov \rp, #SPEAR_DBG_UART_BASE @ Physical base diff --git a/arch/arm/plat-spear/include/plat/hardware.h b/arch/arm/plat-spear/include/plat/hardware.h deleted file mode 100644 index 70187d7..0000000 --- a/arch/arm/plat-spear/include/plat/hardware.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/hardware.h - * - * Hardware definitions for SPEAr - * - * Copyright (C) 2010 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_HARDWARE_H -#define __PLAT_HARDWARE_H - -#endif /* __PLAT_HARDWARE_H */ diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h new file mode 100644 index 0000000..e14a3e4 --- /dev/null +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -0,0 +1,21 @@ +/* + * arch/arm/plat-spear/include/plat/pl080.h + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PLAT_PL080_H +#define __PLAT_PL080_H + +struct pl08x_dma_chan; +int pl080_get_signal(struct pl08x_dma_chan *ch); +void pl080_put_signal(struct pl08x_dma_chan *ch); + +#endif /* __PLAT_PL080_H */ diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 1bf8452..6dd455b 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -13,7 +13,7 @@ #include <linux/io.h> #include <linux/amba/serial.h> -#include <mach/hardware.h> +#include <mach/spear.h> #ifndef __PLAT_UNCOMPRESS_H #define __PLAT_UNCOMPRESS_H diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c new file mode 100644 index 0000000..a56a067 --- /dev/null +++ b/arch/arm/plat-spear/pl080.c @@ -0,0 +1,80 @@ +/* + * arch/arm/plat-spear/pl080.c + * + * DMAC pl080 definitions for SPEAr platform + * + * Copyright (C) 2012 ST Microelectronics + * Viresh Kumar <viresh.kumar@st.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/amba/pl08x.h> +#include <linux/amba/bus.h> +#include <linux/bug.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/spinlock_types.h> +#include <mach/spear.h> +#include <mach/misc_regs.h> + +static spinlock_t lock = __SPIN_LOCK_UNLOCKED(x); + +struct { + unsigned char busy; + unsigned char val; +} signals[16] = {{0, 0}, }; + +int pl080_get_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned int signal = cd->min_signal, val; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* Return if signal is already acquired by somebody else */ + if (signals[signal].busy && + (signals[signal].val != cd->muxval)) { + spin_unlock_irqrestore(&lock, flags); + return -EBUSY; + } + + /* If acquiring for the first time, configure it */ + if (!signals[signal].busy) { + val = readl(DMA_CHN_CFG); + + /* + * Each request line has two bits in DMA_CHN_CFG register. To + * goto the bits of current request line, do left shift of + * value by 2 * signal number. + */ + val &= ~(0x3 << (signal * 2)); + val |= cd->muxval << (signal * 2); + writel(val, DMA_CHN_CFG); + } + + signals[signal].busy++; + signals[signal].val = cd->muxval; + spin_unlock_irqrestore(&lock, flags); + + return signal; +} + +void pl080_put_signal(struct pl08x_dma_chan *ch) +{ + const struct pl08x_channel_data *cd = ch->cd; + unsigned long flags; + + spin_lock_irqsave(&lock, flags); + + /* if signal is not used */ + if (!signals[cd->min_signal].busy) + BUG(); + + signals[cd->min_signal].busy--; + + spin_unlock_irqrestore(&lock, flags); +} diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index 16f203e..4471a23 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -13,7 +13,7 @@ #include <linux/io.h> #include <asm/system_misc.h> #include <asm/hardware/sp810.h> -#include <mach/hardware.h> +#include <mach/spear.h> #include <mach/generic.h> void spear_restart(char mode, const char *cmd) diff --git a/arch/arm/plat-spear/time.c b/arch/arm/plat-spear/time.c index abb5bde..a3164d1 100644 --- a/arch/arm/plat-spear/time.c +++ b/arch/arm/plat-spear/time.c @@ -15,14 +15,13 @@ #include <linux/err.h> #include <linux/init.h> #include <linux/interrupt.h> +#include <linux/ioport.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/time.h> #include <linux/irq.h> #include <asm/mach/time.h> #include <mach/generic.h> -#include <mach/hardware.h> -#include <mach/irqs.h> /* * We would use TIMER0 and TIMER1 as clockevent and clocksource. @@ -175,7 +174,7 @@ static struct irqaction spear_timer_irq = { .handler = spear_timer_interrupt }; -static void __init spear_clockevent_init(void) +static void __init spear_clockevent_init(int irq) { u32 tick_rate; @@ -195,19 +194,19 @@ static void __init spear_clockevent_init(void) clockevents_register_device(&clkevt); - setup_irq(SPEAR_GPT0_CHAN0_IRQ, &spear_timer_irq); + setup_irq(irq, &spear_timer_irq); } -void __init spear_setup_timer(void) +void __init spear_setup_timer(resource_size_t base, int irq) { int ret; - if (!request_mem_region(SPEAR_GPT0_BASE, SZ_1K, "gpt0")) { + if (!request_mem_region(base, SZ_1K, "gpt0")) { pr_err("%s:cannot get IO addr\n", __func__); return; } - gpt_base = (void __iomem *)ioremap(SPEAR_GPT0_BASE, SZ_1K); + gpt_base = ioremap(base, SZ_1K); if (!gpt_base) { pr_err("%s:ioremap failed for gpt\n", __func__); goto err_mem; @@ -225,7 +224,7 @@ void __init spear_setup_timer(void) goto err_clk; } - spear_clockevent_init(); + spear_clockevent_init(irq); spear_clocksource_init(); return; @@ -235,5 +234,5 @@ err_clk: err_iomap: iounmap(gpt_base); err_mem: - release_mem_region(SPEAR_GPT0_BASE, SZ_1K); + release_mem_region(base, SZ_1K); } |