Merge tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6 into next/cleanup

From:  Sascha Hauer <s.hauer@pengutronix.de>

ARM: i.MX cleanups for 3.5

* tag 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6: (5 commits)
  ARM: mx53: fix pad definitions for MX53_PAD_EIM_D28__I2C1_SDA and MX53_PAD_GPIO_8__CAN1_RXCAN
  ARM: imx/eukrea_mbimx27-baseboard: fix typo in error message
  ARM: i.MX51 iomux: add missed definitions for SION-bit and mode for some pads
  arm: imx: add missing select IMX_HAVE_PLATFORM for MACH_MX35_3DS in Kconfig
  arm: imx: make various struct sys_timer static

Includes an update to 3.4-rc4

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

41 files changed, 153 insertions, 207 deletions

diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig
index b5ac644..6b31cb6 100644
--- a/arch/arm/configs/imx_v4_v5_defconfig
+++ b/arch/arm/configs/imx_v4_v5_defconfig
@@ -112,6 +112,7 @@ CONFIG_WATCHDOG=y
 CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX=y
 CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_FB=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 889d73a..7e84f45 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -8,8 +8,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_U8500=y
-CONFIG_UX500_SOC_DB5500=y
-CONFIG_UX500_SOC_DB8500=y
 CONFIG_MACH_HREFV60=y
 CONFIG_MACH_SNOWBALL=y
 CONFIG_MACH_U5500=y
@@ -39,7 +37,6 @@ CONFIG_CAIF=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=65536
-CONFIG_MISC_DEVICES=y
 CONFIG_AB8500_PWM=y
 CONFIG_SENSORS_BH1780=y
 CONFIG_NETDEVICES=y
@@ -65,16 +62,18 @@ CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_NOMADIK=y
-CONFIG_I2C=y
-CONFIG_I2C_NOMADIK=y
 CONFIG_SPI=y
 CONFIG_SPI_PL022=y
 CONFIG_GPIO_STMPE=y
 CONFIG_GPIO_TC3589X=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_AB8500_BM=y
+CONFIG_AB8500_BATTERY_THERM_ON_BATCTRL=y
 CONFIG_MFD_STMPE=y
 CONFIG_MFD_TC3589X=y
 CONFIG_AB5500_CORE=y
 CONFIG_AB8500_CORE=y
+CONFIG_REGULATOR=y
 CONFIG_REGULATOR_AB8500=y
 # CONFIG_HID_SUPPORT is not set
 CONFIG_USB_GADGET=y
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index d9f0d77..99affb5 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -1162,7 +1162,6 @@ void __init at91_add_device_serial(void)
 	}
 }
 #else
-void __init __deprecated at91_init_serial(struct at91_uart_config *config) {}
 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
 void __init at91_add_device_serial(void) {}
 #endif
diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c
index dd7f782..104ca40 100644
--- a/arch/arm/mach-at91/at91rm9200_time.c
+++ b/arch/arm/mach-at91/at91rm9200_time.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/clockchips.h>
+#include <linux/export.h>
 
 #include <asm/mach/time.h>
 
@@ -176,6 +177,7 @@ static struct clock_event_device clkevt = {
 };
 
 void __iomem *at91_st_base;
+EXPORT_SYMBOL_GPL(at91_st_base);
 
 void __init at91rm9200_ioremap_st(u32 addr)
 {
diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c
index 78ffc83..2b15b8a 100644
--- a/arch/arm/mach-at91/board-rm9200ek.c
+++ b/arch/arm/mach-at91/board-rm9200ek.c
@@ -103,7 +103,7 @@ static struct i2c_board_info __initdata ek_i2c_devices[] = {
 };
 
 #define EK_FLASH_BASE	AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE	SZ_2M
+#define EK_FLASH_SIZE	SZ_8M
 
 static struct physmap_flash_data ek_flash_data = {
 	.width		= 2,
diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c
index 065b5ee..2736453 100644
--- a/arch/arm/mach-at91/board-sam9261ek.c
+++ b/arch/arm/mach-at91/board-sam9261ek.c
@@ -76,8 +76,6 @@ static struct resource dm9000_resource[] = {
 		.flags	= IORESOURCE_MEM
 	},
 	[2] = {
-		.start	= AT91_PIN_PC11,
-		.end	= AT91_PIN_PC11,
 		.flags	= IORESOURCE_IRQ
 			| IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
 	}
@@ -121,6 +119,8 @@ static struct sam9_smc_config __initdata dm9000_smc_config = {
 
 static void __init ek_add_device_dm9000(void)
 {
+	struct resource *r = &dm9000_resource[2];
+
 	/* Configure chip-select 2 (DM9000) */
 	sam9_smc_configure(0, 2, &dm9000_smc_config);
 
@@ -130,6 +130,7 @@ static void __init ek_add_device_dm9000(void)
 	/* Configure Interrupt pin as input, no pull-up */
 	at91_set_gpio_input(AT91_PIN_PC11, 0);
 
+	r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
 	platform_device_register(&dm9000_device);
 }
 #else
diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c
index a0f4d74..6b69282 100644
--- a/arch/arm/mach-at91/clock.c
+++ b/arch/arm/mach-at91/clock.c
@@ -35,6 +35,7 @@
 #include "generic.h"
 
 void __iomem *at91_pmc_base;
+EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 /*
  * There's a lot more which can be done with clocks, including cpufreq
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 3660478..ea2c57a 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -25,7 +25,7 @@ extern void __iomem *at91_pmc_base;
 #define at91_pmc_write(field, value) \
 	__raw_writel(value, at91_pmc_base + field)
 #else
-.extern at91_aic_base
+.extern at91_pmc_base
 #endif
 
 #define	AT91_PMC_SCER		0x00			/* System Clock Enable Register */
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 97cc04d..f44a2e7 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -54,6 +54,7 @@ void __init at91_init_interrupts(unsigned int *priority)
 }
 
 void __iomem *at91_ramc_base[2];
+EXPORT_SYMBOL_GPL(at91_ramc_base);
 
 void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
 {
@@ -292,6 +293,7 @@ void __init at91_ioremap_rstc(u32 base_addr)
 }
 
 void __iomem *at91_matrix_base;
+EXPORT_SYMBOL_GPL(at91_matrix_base);
 
 void __init at91_ioremap_matrix(u32 base_addr)
 {
diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c
index 22e4e0a..adbfb19 100644
--- a/arch/arm/mach-bcmring/core.c
+++ b/arch/arm/mach-bcmring/core.c
@@ -52,8 +52,8 @@
 #include <mach/csp/chipcHw_inline.h>
 #include <mach/csp/tmrHw_reg.h>
 
-static AMBA_APB_DEVICE(uartA, "uarta", MM_ADDR_IO_UARTA, { IRQ_UARTA }, NULL);
-static AMBA_APB_DEVICE(uartB, "uartb", MM_ADDR_IO_UARTB, { IRQ_UARTB }, NULL);
+static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL);
+static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL);
 
 static struct clk pll1_clk = {
 	.name = "PLL1",
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 7561eca..f72d399 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -571,8 +571,10 @@ config MACH_MX35_3DS
 	select MXC_DEBUG_BOARD
 	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
 	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_FB
 	select IMX_HAVE_PLATFORM_IMX_I2C
 	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IPU_CORE
 	select IMX_HAVE_PLATFORM_MXC_EHCI
 	select IMX_HAVE_PLATFORM_MXC_NAND
 	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
index 5f2f91d..b46cab0 100644
--- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c
@@ -243,7 +243,7 @@ static const struct imxuart_platform_data uart_pdata __initconst = {
 static void __maybe_unused ads7846_dev_init(void)
 {
 	if (gpio_request(ADS7846_PENDOWN, "ADS7846 pendown") < 0) {
-		printk(KERN_ERR "can't get ads746 pen down GPIO\n");
+		printk(KERN_ERR "can't get ads7846 pen down GPIO\n");
 		return;
 	}
 	gpio_direction_input(ADS7846_PENDOWN);
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index 861ceb8..ed38d03 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -35,7 +35,7 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = {
 static int __init imx27_avic_add_irq_domain(struct device_node *np,
 				struct device_node *interrupt_parent)
 {
-	irq_domain_add_simple(np, 0);
+	irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL);
 	return 0;
 }
 
@@ -44,7 +44,9 @@ static int __init imx27_gpio_add_irq_domain(struct device_node *np,
 {
 	static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS;
 
-	irq_domain_add_simple(np, gpio_irq_base);
+	gpio_irq_base -= 32;
+	irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops,
+				NULL);
 
 	return 0;
 }
diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c
index 8ecc872..c515f8e 100644
--- a/arch/arm/mach-imx/mach-cpuimx35.c
+++ b/arch/arm/mach-imx/mach-cpuimx35.c
@@ -194,7 +194,7 @@ static void __init eukrea_cpuimx35_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer eukrea_cpuimx35_timer = {
+static struct sys_timer eukrea_cpuimx35_timer = {
 	.init	= eukrea_cpuimx35_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c
index 9704608..7274e79 100644
--- a/arch/arm/mach-imx/mach-mx1ads.c
+++ b/arch/arm/mach-imx/mach-mx1ads.c
@@ -134,7 +134,7 @@ static void __init mx1ads_timer_init(void)
 	mx1_clocks_init(32000);
 }
 
-struct sys_timer mx1ads_timer = {
+static struct sys_timer mx1ads_timer = {
 	.init	= mx1ads_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c
index 0abef5f..686c605 100644
--- a/arch/arm/mach-imx/mach-mx31lite.c
+++ b/arch/arm/mach-imx/mach-mx31lite.c
@@ -283,7 +283,7 @@ static void __init mx31lite_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-struct sys_timer mx31lite_timer = {
+static struct sys_timer mx31lite_timer = {
 	.init	= mx31lite_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c
index f17a15f..1dfe3c7 100644
--- a/arch/arm/mach-imx/mach-mx31moboard.c
+++ b/arch/arm/mach-imx/mach-mx31moboard.c
@@ -580,7 +580,7 @@ static void __init mx31moboard_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-struct sys_timer mx31moboard_timer = {
+static struct sys_timer mx31moboard_timer = {
 	.init	= mx31moboard_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c
index 6ae51c6..c433187 100644
--- a/arch/arm/mach-imx/mach-mx35_3ds.c
+++ b/arch/arm/mach-imx/mach-mx35_3ds.c
@@ -419,7 +419,7 @@ static void __init mx35pdk_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer mx35pdk_timer = {
+static struct sys_timer mx35pdk_timer = {
 	.init	= mx35pdk_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c
index 5fddf94..10c9795 100644
--- a/arch/arm/mach-imx/mach-pcm037.c
+++ b/arch/arm/mach-imx/mach-pcm037.c
@@ -683,7 +683,7 @@ static void __init pcm037_timer_init(void)
 	mx31_clocks_init(26000000);
 }
 
-struct sys_timer pcm037_timer = {
+static struct sys_timer pcm037_timer = {
 	.init	= pcm037_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c
index 237474f..73585f5 100644
--- a/arch/arm/mach-imx/mach-pcm043.c
+++ b/arch/arm/mach-imx/mach-pcm043.c
@@ -399,7 +399,7 @@ static void __init pcm043_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer pcm043_timer = {
+static struct sys_timer pcm043_timer = {
 	.init	= pcm043_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c
index 033257e..add8c69 100644
--- a/arch/arm/mach-imx/mach-vpr200.c
+++ b/arch/arm/mach-imx/mach-vpr200.c
@@ -310,7 +310,7 @@ static void __init vpr200_timer_init(void)
 	mx35_clocks_init();
 }
 
-struct sys_timer vpr200_timer = {
+static struct sys_timer vpr200_timer = {
 	.init	= vpr200_timer_init,
 };
 
diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c
index 05250ae..e10f391 100644
--- a/arch/arm/mach-imx/mm-imx5.c
+++ b/arch/arm/mach-imx/mm-imx5.c
@@ -35,7 +35,7 @@ static void imx5_idle(void)
 	}
 	clk_enable(gpc_dvfs_clk);
 	mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-	if (tzic_enable_wake() != 0)
+	if (!tzic_enable_wake())
 		cpu_do_idle();
 	clk_disable(gpc_dvfs_clk);
 }
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 087dba0..e9cc52d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -27,6 +27,7 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 
+#include <mach/hardware.h>
 
 #include <plat/mux.h>
 
diff --git a/arch/arm/mach-omap1/timer.c b/arch/arm/mach-omap1/timer.c
index 6e90665..fb202af 100644
--- a/arch/arm/mach-omap1/timer.c
+++ b/arch/arm/mach-omap1/timer.c
@@ -47,9 +47,9 @@ static int omap1_dm_timer_set_src(struct platform_device *pdev,
 	int n = (pdev->id - 1) << 1;
 	u32 l;
 
-	l = __raw_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
+	l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
 	l |= source << n;
-	__raw_writel(l, MOD_CONF_CTRL_1);
+	omap_writel(l, MOD_CONF_CTRL_1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index a39fc4b..130ab00 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -20,6 +20,7 @@
 #include <linux/usb/otg.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/gpio_keys.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
@@ -560,7 +561,7 @@ static struct regulator_init_data sdp4430_vusim = {
 	},
 };
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -568,7 +569,7 @@ static struct twl4030_codec_data twl6040_codec = {
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_vibra_data twl6040_vibra = {
+static struct twl6040_vibra_data twl6040_vibra = {
 	.vibldrv_res = 8,
 	.vibrdrv_res = 3,
 	.viblmotor_res = 10,
@@ -577,16 +578,14 @@ static struct twl4030_vibra_data twl6040_vibra = {
 	.vddvibr_uV = 0,	/* fixed volt supply - VBAT */
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
-	.audio		= &twl6040_audio,
 	/* Regulators */
 	.vusim		= &sdp4430_vusim,
 	.vaux1		= &sdp4430_vaux1,
@@ -617,7 +616,8 @@ static int __init omap4_i2c_init(void)
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo,
 				ARRAY_SIZE(sdp4430_i2c_3_boardinfo));
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 74e1687..098d183 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -137,7 +137,7 @@ static struct twl4030_platform_data sdp4430_twldata = {
 
 static void __init omap4_i2c_init(void)
 {
-	omap4_pmic_init("twl6030", &sdp4430_twldata);
+	omap4_pmic_init("twl6030", &sdp4430_twldata, NULL, 0);
 }
 
 static void __init omap4_init(void)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index d8c0e89..1b782ba 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/usb/otg.h>
 #include <linux/i2c/twl.h>
+#include <linux/mfd/twl6040.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/fixed.h>
 #include <linux/wl12xx.h>
@@ -284,7 +285,7 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers)
 	return 0;
 }
 
-static struct twl4030_codec_data twl6040_codec = {
+static struct twl6040_codec_data twl6040_codec = {
 	/* single-step ramp for headset and handsfree */
 	.hs_left_step	= 0x0f,
 	.hs_right_step	= 0x0f,
@@ -292,17 +293,14 @@ static struct twl4030_codec_data twl6040_codec = {
 	.hf_right_step	= 0x1d,
 };
 
-static struct twl4030_audio_data twl6040_audio = {
+static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.naudint_irq	= OMAP44XX_IRQ_SYS_2N,
 	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
-static struct twl4030_platform_data omap4_panda_twldata = {
-	.audio		= &twl6040_audio,
-};
+static struct twl4030_platform_data omap4_panda_twldata;
 
 /*
  * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM
@@ -326,7 +324,8 @@ static int __init omap4_panda_i2c_init(void)
 			TWL_COMMON_REGULATOR_VCXIO |
 			TWL_COMMON_REGULATOR_VUSB |
 			TWL_COMMON_REGULATOR_CLK32KG);
-	omap4_pmic_init("twl6030", &omap4_panda_twldata);
+	omap4_pmic_init("twl6030", &omap4_panda_twldata,
+			&twl6040_data, OMAP44XX_IRQ_SYS_2N);
 	omap_register_i2c_bus(2, 400, NULL, 0);
 	/*
 	 * Bus 3 is attached to the DVI port where devices like the pico DLP
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index 2c27fdb..7144ae6 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -1422,6 +1422,9 @@ static int _ocp_softreset(struct omap_hwmod *oh)
 		goto dis_opt_clks;
 	_write_sysconfig(v, oh);
 
+	if (oh->class->sysc->srst_udelay)
+		udelay(oh->class->sysc->srst_udelay);
+
 	if (oh->class->sysc->sysc_flags & SYSS_HAS_RESET_STATUS)
 		omap_test_timeout((omap_hwmod_read(oh,
 						    oh->class->sysc->syss_offs)
@@ -1903,10 +1906,20 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
  */
 int omap_hwmod_softreset(struct omap_hwmod *oh)
 {
-	if (!oh)
+	u32 v;
+	int ret;
+
+	if (!oh || !(oh->_sysc_cache))
 		return -EINVAL;
 
-	return _ocp_softreset(oh);
+	v = oh->_sysc_cache;
+	ret = _set_softreset(oh, &v);
+	if (ret)
+		goto error;
+	_write_sysconfig(v, oh);
+
+error:
+	return ret;
 }
 
 /**
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
index a5409ce..a6bde34 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c
@@ -1000,7 +1000,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = {
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
index c4f56cb..04a3885 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c
@@ -1049,7 +1049,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = {
 	.slave		= &omap2430_dss_venc_hwmod,
 	.clk		= "dss_ick",
 	.addr		= omap2_dss_venc_addrs,
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 34b9766d..db86ce9 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -1676,7 +1676,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = {
 			.flags	= OMAP_FIREWALL_L4,
 		}
 	},
-	.flags		= OCPIF_SWSUP_IDLE,
 	.user		= OCP_USER_MPU | OCP_USER_SDMA,
 };
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index cc9bd10..6abc757 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -2594,6 +2594,15 @@ static struct omap_hwmod omap44xx_ipu_hwmod = {
 static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = {
 	.rev_offs	= 0x0000,
 	.sysc_offs	= 0x0010,
+	/*
+	 * ISS needs 100 OCP clk cycles delay after a softreset before
+	 * accessing sysconfig again.
+	 * The lowest frequency at the moment for L3 bus is 100 MHz, so
+	 * 1usec delay is needed. Add an x2 margin to be safe (2 usecs).
+	 *
+	 * TODO: Indicate errata when available.
+	 */
+	.srst_udelay	= 2,
 	.sysc_flags	= (SYSC_HAS_MIDLEMODE | SYSC_HAS_RESET_STATUS |
 			   SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET),
 	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 0cdd359..9fc2f44 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -108,8 +108,14 @@ static void omap_uart_set_noidle(struct platform_device *pdev)
 static void omap_uart_set_smartidle(struct platform_device *pdev)
 {
 	struct omap_device *od = to_omap_device(pdev);
+	u8 idlemode;
 
-	omap_hwmod_set_slave_idlemode(od->hwmods[0], HWMOD_IDLEMODE_SMART);
+	if (od->hwmods[0]->class->sysc->idlemodes & SIDLE_SMART_WKUP)
+		idlemode = HWMOD_IDLEMODE_SMART_WKUP;
+	else
+		idlemode = HWMOD_IDLEMODE_SMART;
+
+	omap_hwmod_set_slave_idlemode(od->hwmods[0], idlemode);
 }
 
 #else
@@ -120,124 +126,8 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {}
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_OMAP_MUX
-static struct omap_device_pad default_uart1_pads[] __initdata = {
-	{
-		.name	= "uart1_cts.uart1_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rts.uart1_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_tx.uart1_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart1_rx.uart1_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart2_pads[] __initdata = {
-	{
-		.name	= "uart2_cts.uart2_cts",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rts.uart2_rts",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_tx.uart2_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart2_rx.uart2_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_uart3_pads[] __initdata = {
-	{
-		.name	= "uart3_cts_rctx.uart3_cts_rctx",
-		.enable	= OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rts_sd.uart3_rts_sd",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_tx_irtx.uart3_tx_irtx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart3_rx_irrx.uart3_rx_irrx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
-static struct omap_device_pad default_omap36xx_uart4_pads[] __initdata = {
-	{
-		.name   = "gpmc_wait2.uart4_tx",
-		.enable = OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "gpmc_wait3.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE2,
-	},
-};
-
-static struct omap_device_pad default_omap4_uart4_pads[] __initdata = {
-	{
-		.name	= "uart4_tx.uart4_tx",
-		.enable	= OMAP_PIN_OUTPUT | OMAP_MUX_MODE0,
-	},
-	{
-		.name	= "uart4_rx.uart4_rx",
-		.flags	= OMAP_DEVICE_PAD_REMUX | OMAP_DEVICE_PAD_WAKEUP,
-		.enable	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-		.idle	= OMAP_PIN_INPUT | OMAP_MUX_MODE0,
-	},
-};
-
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
 {
-	switch (bdata->id) {
-	case 0:
-		bdata->pads = default_uart1_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart1_pads);
-		break;
-	case 1:
-		bdata->pads = default_uart2_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart2_pads);
-		break;
-	case 2:
-		bdata->pads = default_uart3_pads;
-		bdata->pads_cnt = ARRAY_SIZE(default_uart3_pads);
-		break;
-	case 3:
-		if (cpu_is_omap44xx()) {
-			bdata->pads = default_omap4_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap4_uart4_pads);
-		} else if (cpu_is_omap3630()) {
-			bdata->pads = default_omap36xx_uart4_pads;
-			bdata->pads_cnt =
-				ARRAY_SIZE(default_omap36xx_uart4_pads);
-		}
-		break;
-	default:
-		break;
-	}
 }
 #else
 static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c
index 4b57757..7a7b893 100644
--- a/arch/arm/mach-omap2/twl-common.c
+++ b/arch/arm/mach-omap2/twl-common.c
@@ -37,6 +37,16 @@ static struct i2c_board_info __initdata pmic_i2c_board_info = {
 	.flags		= I2C_CLIENT_WAKE,
 };
 
+static struct i2c_board_info __initdata omap4_i2c1_board_info[] = {
+	{
+		.addr		= 0x48,
+		.flags		= I2C_CLIENT_WAKE,
+	},
+	{
+		I2C_BOARD_INFO("twl6040", 0x4b),
+	},
+};
+
 void __init omap_pmic_init(int bus, u32 clkrate,
 			   const char *pmic_type, int pmic_irq,
 			   struct twl4030_platform_data *pmic_data)
@@ -49,14 +59,31 @@ void __init omap_pmic_init(int bus, u32 clkrate,
 	omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1);
 }
 
+void __init omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *twl6040_data, int twl6040_irq)
+{
+	/* PMIC part*/
+	strncpy(omap4_i2c1_board_info[0].type, pmic_type,
+		sizeof(omap4_i2c1_board_info[0].type));
+	omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N;
+	omap4_i2c1_board_info[0].platform_data = pmic_data;
+
+	/* TWL6040 audio IC part */
+	omap4_i2c1_board_info[1].irq = twl6040_irq;
+	omap4_i2c1_board_info[1].platform_data = twl6040_data;
+
+	omap_register_i2c_bus(1, 400, omap4_i2c1_board_info, 2);
+
+}
+
 void __init omap_pmic_late_init(void)
 {
 	/* Init the OMAP TWL parameters (if PMIC has been registerd) */
-	if (!pmic_i2c_board_info.irq)
-		return;
-
-	omap3_twl_init();
-	omap4_twl_init();
+	if (pmic_i2c_board_info.irq)
+		omap3_twl_init();
+	if (omap4_i2c1_board_info[0].irq)
+		omap4_twl_init();
 }
 
 #if defined(CONFIG_ARCH_OMAP3)
diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h
index 275dde8..0962748 100644
--- a/arch/arm/mach-omap2/twl-common.h
+++ b/arch/arm/mach-omap2/twl-common.h
@@ -29,6 +29,7 @@
 
 
 struct twl4030_platform_data;
+struct twl6040_platform_data;
 
 void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq,
 		    struct twl4030_platform_data *pmic_data);
@@ -46,12 +47,9 @@ static inline void omap3_pmic_init(const char *pmic_type,
 	omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data);
 }
 
-static inline void omap4_pmic_init(const char *pmic_type,
-				   struct twl4030_platform_data *pmic_data)
-{
-	/* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */
-	omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data);
-}
+void omap4_pmic_init(const char *pmic_type,
+		    struct twl4030_platform_data *pmic_data,
+		    struct twl6040_platform_data *audio_data, int twl6040_irq);
 
 void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data,
 			   u32 pdata_flags, u32 regulators_flags);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
index 880d02e..ef7099e 100644
--- a/arch/arm/mach-ux500/Kconfig
+++ b/arch/arm/mach-ux500/Kconfig
@@ -17,6 +17,7 @@ config UX500_SOC_DB5500
 config UX500_SOC_DB8500
 	bool
 	select MFD_DB8500_PRCMU
+	select REGULATOR
 	select REGULATOR_DB8500_PRCMU
 	select CPU_FREQ_TABLE if CPU_FREQ
 
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
index d2058ef..eff5842 100644
--- a/arch/arm/mach-ux500/platsmp.c
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -99,7 +99,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	 */
 	write_pen_release(cpu_logical_map(cpu));
 
-	gic_raise_softirq(cpumask_of(cpu), 1);
+	smp_send_reschedule(cpu);
 
 	timeout = jiffies + (1 * HZ);
 	while (time_before(jiffies, timeout)) {
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx51.h b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
index c7f5169a..36c8989 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx51.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx51.h
@@ -256,13 +256,13 @@
 #define MX51_PAD_NANDF_RB1__GPIO3_9		IOMUX_PAD(0x4fc, 0x120, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__NANDF_RB1		IOMUX_PAD(0x4fc, 0x120, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB1__PATA_IORDY		IOMUX_PAD(0x4fc, 0x120, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB1__SD4_CMD		IOMUX_PAD(0x4fc, 0x120, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RB1__SD4_CMD		IOMUX_PAD(0x4fc, 0x120, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__DISP2_WAIT		IOMUX_PAD(0x500, 0x124, 5, 0x9a8, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__ECSPI2_SCLK		IOMUX_PAD(0x500, 0x124, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__FEC_COL		IOMUX_PAD(0x500, 0x124, 1, 0x94c, 0, MX51_PAD_CTRL_2)
 #define MX51_PAD_NANDF_RB2__GPIO3_10		IOMUX_PAD(0x500, 0x124, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__NANDF_RB2		IOMUX_PAD(0x500, 0x124, 0, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB2__USBH3_H3_DP		IOMUX_PAD(0x500, 0x124, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB2__USBH3_H3_DP		IOMUX_PAD(0x500, 0x124, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB2__USBH3_NXT		IOMUX_PAD(0x500, 0x124, 6, 0xa20, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__DISP1_WAIT		IOMUX_PAD(0x504, 0x128, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__ECSPI2_MISO		IOMUX_PAD(0x504, 0x128, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
@@ -270,7 +270,7 @@
 #define MX51_PAD_NANDF_RB3__GPIO3_11		IOMUX_PAD(0x504, 0x128, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__NANDF_RB3		IOMUX_PAD(0x504, 0x128, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_RB3__USBH3_CLK		IOMUX_PAD(0x504, 0x128, 6, 0x9f8, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RB3__USBH3_H3_DM		IOMUX_PAD(0x504, 0x128, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_RB3__USBH3_H3_DM		IOMUX_PAD(0x504, 0x128, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO_NAND__GPIO_NAND		IOMUX_PAD(0x514, 0x12c, 0, 0x998, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO_NAND__PATA_INTRQ		IOMUX_PAD(0x514, 0x12c, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS0__GPIO3_16		IOMUX_PAD(0x518, 0x130, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
@@ -283,13 +283,13 @@
 #define MX51_PAD_NANDF_CS2__NANDF_CS2		IOMUX_PAD(0x520, 0x138, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS2__PATA_CS_0		IOMUX_PAD(0x520, 0x138, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS2__SD4_CLK		IOMUX_PAD(0x520, 0x138, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL | PAD_CTL_HYS)
-#define MX51_PAD_NANDF_CS2__USBH3_H1_DP		IOMUX_PAD(0x520, 0x138, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS2__USBH3_H1_DP		IOMUX_PAD(0x520, 0x138, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__FEC_MDC		IOMUX_PAD(0x524, 0x13c, 2, __NA_, 0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS3__GPIO3_19		IOMUX_PAD(0x524, 0x13c, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__NANDF_CS3		IOMUX_PAD(0x524, 0x13c, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__PATA_CS_1		IOMUX_PAD(0x524, 0x13c, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS3__SD4_DAT0		IOMUX_PAD(0x524, 0x13c, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_NANDF_CS3__USBH3_H1_DM		IOMUX_PAD(0x524, 0x13c, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_NANDF_CS3__USBH3_H1_DM		IOMUX_PAD(0x524, 0x13c, 0x17, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS4__FEC_TDATA1		IOMUX_PAD(0x528, 0x140, 2, __NA_, 0, MX51_PAD_CTRL_5)
 #define MX51_PAD_NANDF_CS4__GPIO3_20		IOMUX_PAD(0x528, 0x140, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_CS4__NANDF_CS4		IOMUX_PAD(0x528, 0x140, 0, __NA_, 0, NO_PAD_CTRL)
@@ -316,7 +316,7 @@
 #define MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK	IOMUX_PAD(0x538, 0x150, 1, 0x974, 0, MX51_PAD_CTRL_4)
 #define MX51_PAD_NANDF_RDY_INT__GPIO3_24	IOMUX_PAD(0x538, 0x150, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_RDY_INT__NANDF_RDY_INT	IOMUX_PAD(0x538, 0x150, 0, 0x938, 0, NO_PAD_CTRL)
-#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		IOMUX_PAD(0x538, 0x150, 5, __NA_, 0, MX51_SDHCI_PAD_CTRL)
+#define MX51_PAD_NANDF_RDY_INT__SD3_CMD		IOMUX_PAD(0x538, 0x150, 0x15, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_NANDF_D15__ECSPI2_MOSI		IOMUX_PAD(0x53c, 0x154, 2, __NA_, 0, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_NANDF_D15__GPIO3_25		IOMUX_PAD(0x53c, 0x154, 3, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_NANDF_D15__NANDF_D15		IOMUX_PAD(0x53c, 0x154, 0, __NA_, 0, NO_PAD_CTRL)
@@ -672,23 +672,23 @@
 #define MX51_PAD_DISP2_DAT5__DISP2_DAT5		IOMUX_PAD(0x770, 0x368, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__DISP2_DAT6		IOMUX_PAD(0x774, 0x36c, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__FEC_TDATA1		IOMUX_PAD(0x774, 0x36c, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT6__GPIO1_19		IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT6__GPIO1_19		IOMUX_PAD(0x774, 0x36c, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__KEY_ROW4		IOMUX_PAD(0x774, 0x36c, 4, 0x9d0, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT6__USBH3_STP		IOMUX_PAD(0x774, 0x36c, 3, 0xa24, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__DISP2_DAT7		IOMUX_PAD(0x778, 0x370, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__FEC_TDATA2		IOMUX_PAD(0x778, 0x370, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT7__GPIO1_29		IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT7__GPIO1_29		IOMUX_PAD(0x778, 0x370, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__KEY_ROW5		IOMUX_PAD(0x778, 0x370, 4, 0x9d4, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT7__USBH3_NXT		IOMUX_PAD(0x778, 0x370, 3, 0xa20, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__DISP2_DAT8		IOMUX_PAD(0x77c, 0x374, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__FEC_TDATA3		IOMUX_PAD(0x77c, 0x374, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT8__GPIO1_30		IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT8__GPIO1_30		IOMUX_PAD(0x77c, 0x374, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__KEY_ROW6		IOMUX_PAD(0x77c, 0x374, 4, 0x9d8, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT8__USBH3_DATA0	IOMUX_PAD(0x77c, 0x374, 3, 0x9fc, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__AUD6_RXC		IOMUX_PAD(0x780, 0x378, 4, 0x8f4, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__DISP2_DAT9		IOMUX_PAD(0x780, 0x378, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__FEC_TX_EN		IOMUX_PAD(0x780, 0x378, 2, __NA_, 0, MX51_PAD_CTRL_5)
-#define MX51_PAD_DISP2_DAT9__GPIO1_31		IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT9__GPIO1_31		IOMUX_PAD(0x780, 0x378, 5, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT9__USBH3_DATA1	IOMUX_PAD(0x780, 0x378, 3, 0xa00, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT10__DISP2_DAT10	IOMUX_PAD(0x784, 0x37c, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT10__DISP2_SER_CS	IOMUX_PAD(0x784, 0x37c, 5, __NA_, 0, NO_PAD_CTRL)
@@ -698,7 +698,7 @@
 #define MX51_PAD_DISP2_DAT11__AUD6_TXD		IOMUX_PAD(0x788, 0x380, 4, 0x8f0, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT11__DISP2_DAT11	IOMUX_PAD(0x788, 0x380, 0, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT11__FEC_RX_CLK	IOMUX_PAD(0x788, 0x380, 2, 0x968, 1, NO_PAD_CTRL)
-#define MX51_PAD_DISP2_DAT11__GPIO1_10		IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_DISP2_DAT11__GPIO1_10		IOMUX_PAD(0x788, 0x380, 7, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT11__USBH3_DATA3	IOMUX_PAD(0x788, 0x380, 3, 0xa08, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT12__AUD6_RXD		IOMUX_PAD(0x78c, 0x384, 4, 0x8ec, 1, NO_PAD_CTRL)
 #define MX51_PAD_DISP2_DAT12__DISP2_DAT12	IOMUX_PAD(0x78c, 0x384, 0, __NA_, 0, NO_PAD_CTRL)
@@ -746,16 +746,16 @@
 #define MX51_PAD_SD1_DATA3__CSPI_SS1		IOMUX_PAD(0x7b0, 0x3a8, 2, 0x920, 1, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_SD1_DATA3__SD1_DATA3		IOMUX_PAD(0x7b0, 0x3a8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_GPIO1_0__CSPI_SS2		IOMUX_PAD(0x7b4, 0x3ac, 2, 0x924, 0, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_0__GPIO1_0		IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_0__GPIO1_0		IOMUX_PAD(0x7b4, 0x3ac, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_0__SD1_CD		IOMUX_PAD(0x7b4, 0x3ac, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_GPIO1_1__CSPI_MISO		IOMUX_PAD(0x7b8, 0x3b0, 2, 0x918, 2, MX51_ECSPI_PAD_CTRL)
-#define MX51_PAD_GPIO1_1__GPIO1_1		IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_1__GPIO1_1		IOMUX_PAD(0x7b8, 0x3b0, 1, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_1__SD1_WP		IOMUX_PAD(0x7b8, 0x3b0, 0, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_EIM_DA12__EIM_DA12		IOMUX_PAD(__NA_, 0x04c, 0, 0x000, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_DA13__EIM_DA13		IOMUX_PAD(__NA_, 0x050, 0, 0x000, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_DA14__EIM_DA14		IOMUX_PAD(__NA_, 0x054, 0, 0x000, 0, NO_PAD_CTRL)
 #define MX51_PAD_EIM_DA15__EIM_DA15		IOMUX_PAD(__NA_, 0x058, 0, 0x000, 0, NO_PAD_CTRL)
-#define MX51_PAD_SD2_CMD__CSPI_MOSI		IOMUX_PAD(__NA_, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
+#define MX51_PAD_SD2_CMD__CSPI_MOSI		IOMUX_PAD(0x7bc, 0x3b4, 2, 0x91c, 3, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_SD2_CMD__I2C1_SCL		IOMUX_PAD(0x7bc, 0x3b4, 0x11, 0x9b0, 2, MX51_I2C_PAD_CTRL)
 #define MX51_PAD_SD2_CMD__SD2_CMD		IOMUX_PAD(0x7bc, 0x3b4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_SD2_CLK__CSPI_SCLK		IOMUX_PAD(0x7c0, 0x3b8, 2, 0x914, 3, MX51_ECSPI_PAD_CTRL)
@@ -766,19 +766,19 @@
 #define MX51_PAD_SD2_DATA0__SD2_DATA0		IOMUX_PAD(0x7c4, 0x3bc, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_SD2_DATA1__SD1_DAT5		IOMUX_PAD(0x7c8, 0x3c0, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA1__SD2_DATA1		IOMUX_PAD(0x7c8, 0x3c0, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA1__USBH3_H2_DP		IOMUX_PAD(0x7c8, 0x3c0, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA1__USBH3_H2_DP		IOMUX_PAD(0x7c8, 0x3c0, 0x12, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA2__SD1_DAT6		IOMUX_PAD(0x7cc, 0x3c4, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA2__SD2_DATA2		IOMUX_PAD(0x7cc, 0x3c4, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
-#define MX51_PAD_SD2_DATA2__USBH3_H2_DM		IOMUX_PAD(0x7cc, 0x3c4, 2, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_SD2_DATA2__USBH3_H2_DM		IOMUX_PAD(0x7cc, 0x3c4, 0x12, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA3__CSPI_SS2		IOMUX_PAD(0x7d0, 0x3c8, 2, 0x924, 1, MX51_ECSPI_PAD_CTRL)
 #define MX51_PAD_SD2_DATA3__SD1_DAT7		IOMUX_PAD(0x7d0, 0x3c8, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_SD2_DATA3__SD2_DATA3		IOMUX_PAD(0x7d0, 0x3c8, 0x10, __NA_, 0, MX51_SDHCI_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__CCM_OUT_2		IOMUX_PAD(0x7d4, 0x3cc, 5, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_2__GPIO1_2		IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_2__GPIO1_2		IOMUX_PAD(0x7d4, 0x3cc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__I2C2_SCL		IOMUX_PAD(0x7d4, 0x3cc, 0x12, 0x9b8, 3, MX51_I2C_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__PLL1_BYP		IOMUX_PAD(0x7d4, 0x3cc, 7, 0x90c, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_2__PWM1_PWMO		IOMUX_PAD(0x7d4, 0x3cc, 1, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_3__GPIO1_3		IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_3__GPIO1_3		IOMUX_PAD(0x7d8, 0x3d0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__I2C2_SDA		IOMUX_PAD(0x7d8, 0x3d0, 0x12, 0x9bc, 3, MX51_I2C_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__PLL2_BYP		IOMUX_PAD(0x7d8, 0x3d0, 7, 0x910, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_3__PWM2_PWMO		IOMUX_PAD(0x7d8, 0x3d0, 1, __NA_, 0, NO_PAD_CTRL)
@@ -786,27 +786,27 @@
 #define MX51_PAD_PMIC_INT_REQ__PMIC_PMU_IRQ_B	IOMUX_PAD(0x7fc, 0x3d4, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__DISP2_EXT_CLK		IOMUX_PAD(0x804, 0x3d8, 4, 0x908, 1, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__EIM_RDY		IOMUX_PAD(0x804, 0x3d8, 3, 0x938, 1, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_4__GPIO1_4		IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_4__GPIO1_4		IOMUX_PAD(0x804, 0x3d8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_4__WDOG1_WDOG_B		IOMUX_PAD(0x804, 0x3d8, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__CSI2_MCLK		IOMUX_PAD(0x808, 0x3dc, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__DISP2_PIN16		IOMUX_PAD(0x808, 0x3dc, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_5__GPIO1_5		IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_5__GPIO1_5		IOMUX_PAD(0x808, 0x3dc, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_5__WDOG2_WDOG_B		IOMUX_PAD(0x808, 0x3dc, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_6__DISP2_PIN17		IOMUX_PAD(0x80c, 0x3e0, 4, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_6__GPIO1_6		IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_6__GPIO1_6		IOMUX_PAD(0x80c, 0x3e0, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_6__REF_EN_B		IOMUX_PAD(0x80c, 0x3e0, 3, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__CCM_OUT_0		IOMUX_PAD(0x810, 0x3e4, 3, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_7__GPIO1_7		IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_7__GPIO1_7		IOMUX_PAD(0x810, 0x3e4, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__SD2_WP		IOMUX_PAD(0x810, 0x3e4, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_GPIO1_7__SPDIF_OUT1		IOMUX_PAD(0x810, 0x3e4, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__CSI2_DATA_EN		IOMUX_PAD(0x814, 0x3e8, 2, 0x99c, 2, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_8__GPIO1_8		IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_8__GPIO1_8		IOMUX_PAD(0x814, 0x3e8, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__SD2_CD		IOMUX_PAD(0x814, 0x3e8, 6, __NA_, 0, MX51_ESDHC_PAD_CTRL)
 #define MX51_PAD_GPIO1_8__USBH3_PWR		IOMUX_PAD(0x814, 0x3e8, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__CCM_OUT_1		IOMUX_PAD(0x818, 0x3ec, 3, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__DISP2_D1_CS		IOMUX_PAD(0x818, 0x3ec, 2, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__DISP2_SER_CS		IOMUX_PAD(0x818, 0x3ec, 7, __NA_, 0, NO_PAD_CTRL)
-#define MX51_PAD_GPIO1_9__GPIO1_9		IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, NO_PAD_CTRL)
+#define MX51_PAD_GPIO1_9__GPIO1_9		IOMUX_PAD(0x818, 0x3ec, 0, __NA_, 0, MX51_GPIO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__SD2_LCTL		IOMUX_PAD(0x818, 0x3ec, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX51_PAD_GPIO1_9__USBH3_OC		IOMUX_PAD(0x818, 0x3ec, 1, __NA_, 0, NO_PAD_CTRL)
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
index 527f8fe..9761e00 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h
@@ -573,7 +573,7 @@
 #define MX53_PAD_EIM_D28__UART2_CTS			IOMUX_PAD(0x494, 0x14C, 2, __NA_, 0, MX53_UART_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO		IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__CSPI_MOSI			IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, NO_PAD_CTRL)
-#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, PAD_CTRL_I2C)
+#define MX53_PAD_EIM_D28__I2C1_SDA			IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_EXT_TRIG			IOMUX_PAD(0x494, 0x14C, 6, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D28__IPU_DI0_PIN13			IOMUX_PAD(0x494, 0x14C, 7, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_EIM_D29__EMI_WEIM_D_29			IOMUX_PAD(0x498, 0x150, 0, __NA_, 0, NO_PAD_CTRL)
@@ -1187,7 +1187,7 @@
 #define MX53_PAD_GPIO_8__ESAI1_TX5_RX0			IOMUX_PAD(0x6C8, 0x338, 0, 0x7F8, 1, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__GPIO1_8			IOMUX_PAD(0x6C8, 0x338, 1, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__EPIT2_EPITO			IOMUX_PAD(0x6C8, 0x338, 2, __NA_, 0, NO_PAD_CTRL)
-#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 3, NO_PAD_CTRL)
+#define MX53_PAD_GPIO_8__CAN1_RXCAN			IOMUX_PAD(0x6C8, 0x338, 3, 0x760, 2, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__UART2_RXD_MUX			IOMUX_PAD(0x6C8, 0x338, 4, 0x880, 5, MX53_UART_PAD_CTRL)
 #define MX53_PAD_GPIO_8__FIRI_TXD			IOMUX_PAD(0x6C8, 0x338, 5, __NA_, 0, NO_PAD_CTRL)
 #define MX53_PAD_GPIO_8__SPDIF_SRCLK			IOMUX_PAD(0x6C8, 0x338, 6, __NA_, 0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 8070145..3f26db4 100644
--- a/arch/arm/plat-omap/include/plat/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -305,6 +305,7 @@ struct omap_hwmod_sysc_fields {
  * @rev_offs: IP block revision register offset (from module base addr)
  * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr)
  * @syss_offs: OCP_SYSSTATUS register offset (from module base addr)
+ * @srst_udelay: Delay needed after doing a softreset in usecs
  * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART}
  * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported
  * @clockact: the default value of the module CLOCKACTIVITY bits
@@ -330,9 +331,10 @@ struct omap_hwmod_class_sysconfig {
 	u16 sysc_offs;
 	u16 syss_offs;
 	u16 sysc_flags;
+	struct omap_hwmod_sysc_fields *sysc_fields;
+	u8 srst_udelay;
 	u8 idlemodes;
 	u8 clockact;
-	struct omap_hwmod_sysc_fields *sysc_fields;
 };
 
 /**
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index eec98af..f9a8c53 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -348,7 +348,6 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-#ifdef CONFIG_PM
 void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
@@ -358,17 +357,18 @@ void omap3_sram_restore_context(void)
 			       omap3_sram_configure_core_dpll_sz);
 	omap_push_sram_idle();
 }
-#endif /* CONFIG_PM */
-
-#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int omap34xx_sram_init(void)
 {
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	omap3_sram_restore_context();
-#endif
 	return 0;
 }
+#else
+static inline int omap34xx_sram_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_ARCH_OMAP3 */
 
 static inline int am33xx_sram_init(void)
 {