avr32: Add pin configuration choice to LCDC peripheral

This patch lets the board code choose which pin out to use for the LCD
interface.

On AT32AP7000 the LCDC is wired to two sets of pins, which lets the user
choose between dual ethernet and 32-bit EBI. For the ATNGW100 board it
is vital to have the choice to select the alternative pinout since this
pinout is routed to the external headers.

Update ATSTK1002 and ATSTK1004 to use the new interface.

Signed-off-by: Hans-Christian Egtvedt <hcegtvedt@atmel.com>
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>

3 files changed, 75 insertions, 34 deletions

diff --git a/arch/avr32/boards/atstk1000/atstk1002.c b/arch/avr32/boards/atstk1000/atstk1002.c
index 0e13326..86b363c 100644
--- a/arch/avr32/boards/atstk1000/atstk1002.c
+++ b/arch/avr32/boards/atstk1000/atstk1002.c
@@ -238,7 +238,7 @@ static int __init atstk1002_init(void)
 	set_hw_addr(at32_add_device_eth(1, &eth_data[1]));
 #else
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size);
+			     fbmem_start, fbmem_size, 0);
 #endif
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
diff --git a/arch/avr32/boards/atstk1000/atstk1004.c b/arch/avr32/boards/atstk1000/atstk1004.c
index cbf09dd..c7236df 100644
--- a/arch/avr32/boards/atstk1000/atstk1004.c
+++ b/arch/avr32/boards/atstk1000/atstk1004.c
@@ -140,7 +140,7 @@ static int __init atstk1004_init(void)
 	at32_add_device_mci(0);
 #endif
 	at32_add_device_lcdc(0, &atstk1000_lcdc_data,
-			     fbmem_start, fbmem_size);
+			     fbmem_start, fbmem_size, 0);
 	at32_add_device_usba(0, NULL);
 #ifndef CONFIG_BOARD_ATSTK100X_SW3_CUSTOM
 	at32_add_device_ssc(0, ATMEL_SSC_TX);
diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c
index 34b56de..08115f9 100644
--- a/arch/avr32/mach-at32ap/at32ap700x.c
+++ b/arch/avr32/mach-at32ap/at32ap700x.c
@@ -1257,7 +1257,8 @@ static struct clk atmel_lcdfb0_pixclk = {
 
 struct platform_device *__init
 at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
-		     unsigned long fbmem_start, unsigned long fbmem_len)
+		     unsigned long fbmem_start, unsigned long fbmem_len,
+		     unsigned int pin_config)
 {
 	struct platform_device *pdev;
 	struct atmel_lcdfb_info *info;
@@ -1284,37 +1285,77 @@ at32_add_device_lcdc(unsigned int id, struct atmel_lcdfb_info *data,
 	switch (id) {
 	case 0:
 		pdev = &atmel_lcdfb0_device;
-		select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
-		select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
-		select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
-		select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
-		select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
-		select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
-		select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
-		select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
-		select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
-		select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
-		select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
-		select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
-		select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
-		select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
-		select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
-		select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
-		select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
-		select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
-		select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
-		select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
-		select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
-		select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
-		select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
-		select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
-		select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
-		select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
-		select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
-		select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
-		select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
-		select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
-		select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+
+		switch (pin_config) {
+		case 0:
+			select_peripheral(PC(19), PERIPH_A, 0);	/* CC	  */
+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+			select_peripheral(PC(23), PERIPH_A, 0);	/* DVAL	  */
+			select_peripheral(PC(24), PERIPH_A, 0);	/* MODE	  */
+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+			select_peripheral(PC(26), PERIPH_A, 0);	/* DATA0  */
+			select_peripheral(PC(27), PERIPH_A, 0);	/* DATA1  */
+			select_peripheral(PC(28), PERIPH_A, 0);	/* DATA2  */
+			select_peripheral(PC(29), PERIPH_A, 0);	/* DATA3  */
+			select_peripheral(PC(30), PERIPH_A, 0);	/* DATA4  */
+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+			select_peripheral(PD(2),  PERIPH_A, 0);	/* DATA8  */
+			select_peripheral(PD(3),  PERIPH_A, 0);	/* DATA9  */
+			select_peripheral(PD(4),  PERIPH_A, 0);	/* DATA10 */
+			select_peripheral(PD(5),  PERIPH_A, 0);	/* DATA11 */
+			select_peripheral(PD(6),  PERIPH_A, 0);	/* DATA12 */
+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+			select_peripheral(PD(10), PERIPH_A, 0);	/* DATA16 */
+			select_peripheral(PD(11), PERIPH_A, 0);	/* DATA17 */
+			select_peripheral(PD(12), PERIPH_A, 0);	/* DATA18 */
+			select_peripheral(PD(13), PERIPH_A, 0);	/* DATA19 */
+			select_peripheral(PD(14), PERIPH_A, 0);	/* DATA20 */
+			select_peripheral(PD(15), PERIPH_A, 0);	/* DATA21 */
+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+			break;
+		case 1:
+			select_peripheral(PE(0),  PERIPH_B, 0);	/* CC	  */
+			select_peripheral(PC(20), PERIPH_A, 0);	/* HSYNC  */
+			select_peripheral(PC(21), PERIPH_A, 0);	/* PCLK	  */
+			select_peripheral(PC(22), PERIPH_A, 0);	/* VSYNC  */
+			select_peripheral(PE(1),  PERIPH_B, 0);	/* DVAL	  */
+			select_peripheral(PE(2),  PERIPH_B, 0);	/* MODE	  */
+			select_peripheral(PC(25), PERIPH_A, 0);	/* PWR	  */
+			select_peripheral(PE(3),  PERIPH_B, 0);	/* DATA0  */
+			select_peripheral(PE(4),  PERIPH_B, 0);	/* DATA1  */
+			select_peripheral(PE(5),  PERIPH_B, 0);	/* DATA2  */
+			select_peripheral(PE(6),  PERIPH_B, 0);	/* DATA3  */
+			select_peripheral(PE(7),  PERIPH_B, 0);	/* DATA4  */
+			select_peripheral(PC(31), PERIPH_A, 0);	/* DATA5  */
+			select_peripheral(PD(0),  PERIPH_A, 0);	/* DATA6  */
+			select_peripheral(PD(1),  PERIPH_A, 0);	/* DATA7  */
+			select_peripheral(PE(8),  PERIPH_B, 0);	/* DATA8  */
+			select_peripheral(PE(9),  PERIPH_B, 0);	/* DATA9  */
+			select_peripheral(PE(10), PERIPH_B, 0);	/* DATA10 */
+			select_peripheral(PE(11), PERIPH_B, 0);	/* DATA11 */
+			select_peripheral(PE(12), PERIPH_B, 0);	/* DATA12 */
+			select_peripheral(PD(7),  PERIPH_A, 0);	/* DATA13 */
+			select_peripheral(PD(8),  PERIPH_A, 0);	/* DATA14 */
+			select_peripheral(PD(9),  PERIPH_A, 0);	/* DATA15 */
+			select_peripheral(PE(13), PERIPH_B, 0);	/* DATA16 */
+			select_peripheral(PE(14), PERIPH_B, 0);	/* DATA17 */
+			select_peripheral(PE(15), PERIPH_B, 0);	/* DATA18 */
+			select_peripheral(PE(16), PERIPH_B, 0);	/* DATA19 */
+			select_peripheral(PE(17), PERIPH_B, 0);	/* DATA20 */
+			select_peripheral(PE(18), PERIPH_B, 0);	/* DATA21 */
+			select_peripheral(PD(16), PERIPH_A, 0);	/* DATA22 */
+			select_peripheral(PD(17), PERIPH_A, 0);	/* DATA23 */
+			break;
+		default:
+			goto err_invalid_id;
+		}
 
 		clk_set_parent(&atmel_lcdfb0_pixclk, &pll0);
 		clk_set_rate(&atmel_lcdfb0_pixclk, clk_get_rate(&pll0));