diff options
author | Bryan Wu <bryan.wu@analog.com> | 2007-10-10 17:20:06 (GMT) |
---|---|---|
committer | Bryan Wu <bryan.wu@analog.com> | 2007-10-10 17:20:06 (GMT) |
commit | c6c4d7bbbb498c38afa05688dfc2784948a0c4e2 (patch) | |
tree | 9ebefb1b6c6ceff6e83eda3dfcbd616a725ecced /arch/blackfin/mach-bf537 | |
parent | bbf25010f1a6b761914430f5fca081ec8c7accd1 (diff) | |
download | linux-fsl-qoriq-c6c4d7bbbb498c38afa05688dfc2784948a0c4e2.tar.xz |
Blackfin arch: update platform driver resource information to all board files
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Diffstat (limited to 'arch/blackfin/mach-bf537')
-rw-r--r-- | arch/blackfin/mach-bf537/boards/cm_bf537.c | 87 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/generic_board.c | 397 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/pnav10.c | 53 | ||||
-rw-r--r-- | arch/blackfin/mach-bf537/boards/stamp.c | 142 |
4 files changed, 569 insertions, 110 deletions
diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index a8f947b..44dea05 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -35,7 +35,9 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> #include <linux/usb_isp1362.h> +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> /* @@ -113,7 +115,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -125,7 +127,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -136,7 +138,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -146,7 +148,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -156,7 +158,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -165,7 +167,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -174,17 +176,33 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ @@ -316,6 +334,43 @@ static struct platform_device bfin_mac_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 64 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) &rtc_device, @@ -347,7 +402,11 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, #endif }; @@ -358,6 +417,10 @@ static int __init cm_bf537_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 648d984..5e9d09e 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -8,7 +8,7 @@ * * Modified: * Copyright 2005 National ICT Australia (NICTA) - * Copyright 2004-2006 Analog Devices Inc. + * Copyright 2004-2007 Analog Devices Inc. * * Bugs: Enter bugs at http://blackfin.uclinux.org/ * @@ -34,20 +34,74 @@ #include <linux/mtd/partitions.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> +#endif +#include <linux/pata_platform.h> #include <linux/irq.h> +#include <linux/interrupt.h> #include <linux/usb_sl811.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> +#include <linux/spi/ad7877.h> /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "UNKNOWN BOARD"; +char *bfin_board_name = "GENERIC Board"; /* * Driver needs to know address, irq and flag pin. */ +#define ISP1761_BASE 0x203C0000 +#define ISP1761_IRQ IRQ_PF7 + +#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE) +static struct resource bfin_isp1761_resources[] = { + [0] = { + .name = "isp1761-regs", + .start = ISP1761_BASE + 0x00000000, + .end = ISP1761_BASE + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = ISP1761_IRQ, + .end = ISP1761_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_isp1761_device = { + .name = "isp1761", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_isp1761_resources), + .resource = bfin_isp1761_resources, +}; + +static struct platform_device *bfin_isp1761_devices[] = { + &bfin_isp1761_device, +}; + +int __init bfin_isp1761_init(void) +{ + unsigned int num_devices = ARRAY_SIZE(bfin_isp1761_devices); + + printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + set_irq_type(ISP1761_IRQ, IRQF_TRIGGER_FALLING); + + return platform_add_devices(bfin_isp1761_devices, num_devices); +} + +void __exit bfin_isp1761_exit(void) +{ + platform_device_unregister(&bfin_isp1761_device); +} + +arch_initcall(bfin_isp1761_init); +#endif + #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) static struct resource bfin_pcmcia_cf_resources[] = { { @@ -59,10 +113,6 @@ static struct resource bfin_pcmcia_cf_resources[] = { .end = 0x20311FFF, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, { .start = IRQ_PF4, .end = IRQ_PF4, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, @@ -96,14 +146,7 @@ static struct resource smc91x_resources[] = { .end = 0x20300300 + 16, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTB, - .end = IRQ_PROG_INTB, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - /* - * denotes the flag pin and is used directly if - * CONFIG_IRQCHIP_DEMUX_GPIO is defined. - */ + .start = IRQ_PF7, .end = IRQ_PF7, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, @@ -117,6 +160,28 @@ static struct platform_device smc91x_device = { }; #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) +static struct resource dm9000_resources[] = { + [0] = { + .start = 0x203FB800, + .end = 0x203FB800 + 8, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_PF9, + .end = IRQ_PF9, + .flags = (IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE), + }, +}; + +static struct platform_device dm9000_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(dm9000_resources), + .resource = dm9000_resources, +}; +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) static struct resource sl811_hcd_resources[] = { { @@ -128,12 +193,8 @@ static struct resource sl811_hcd_resources[] = { .end = 0x20340004, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, - .end = IRQ_PF0 + CONFIG_USB_SL811_BFIN_GPIO, + .start = CONFIG_USB_SL811_BFIN_IRQ, + .end = CONFIG_USB_SL811_BFIN_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, }, }; @@ -141,21 +202,19 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1<<CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif static struct sl811_platform_data sl811_priv = { .potpg = 10, - .power = 250, /* == 500mA */ + .power = 250, /* == 500mA */ #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) .port_power = &sl811_port_power, #endif @@ -170,7 +229,6 @@ static struct platform_device sl811_hcd_device = { .num_resources = ARRAY_SIZE(sl811_hcd_resources), .resource = sl811_hcd_resources, }; - #endif #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -184,13 +242,9 @@ static struct resource isp1362_hcd_resources[] = { .end = 0x20360004, .flags = IORESOURCE_MEM, }, { - .start = IRQ_PROG_INTA, - .end = IRQ_PROG_INTA, + .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, + .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, - }, { - .start = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO, - .end = IRQ_PF0 + CONFIG_USB_ISP1362_BFIN_GPIO, - .flags = IORESOURCE_IRQ, }, }; @@ -246,7 +300,8 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { .name = "bootloader", @@ -302,70 +357,198 @@ static struct bfin5xx_spi_chip ad9960_spi_chip_info = { }; #endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_PBX) +static struct bfin5xx_spi_chip spi_si3xxx_chip_info = { + .ctl_reg = 0x4, /* send zero */ + .enable_dma = 0, + .bits_per_word = 8, + .cs_change_per_word = 1, +}; +#endif + +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) +static struct bfin5xx_spi_chip ad5304_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) +static struct bfin5xx_spi_chip spi_ad7877_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; + +static const struct ad7877_platform_data bfin_ad7877_ts_info = { + .model = 7877, + .vref_delay_usecs = 50, /* internal, no capacitor */ + .x_plate_ohms = 419, + .y_plate_ohms = 486, + .pressure_max = 1000, + .pressure_min = 0, + .stopacq_polarity = 1, + .first_conversion_delay = 3, + .acquisition_time = 1, + .averaging = 1, + .pen_down_acc_interval = 1, +}; +#endif + static struct spi_board_info bfin_spi_board_info[] __initdata = { -#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +#if defined(CONFIG_MTD_M25P80) \ + || defined(CONFIG_MTD_M25P80_MODULE) { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ - .chip_select = 2, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, .mode = SPI_MODE_3, }, #endif -#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +#if defined(CONFIG_SPI_ADC_BF533) \ + || defined(CONFIG_SPI_ADC_BF533_MODULE) { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, }, #endif -#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +#if defined(CONFIG_SND_BLACKFIN_AD1836) \ + || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, #endif - #if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, #endif +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_PBX) + { + .modalias = "fxs-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "fxo-spi", + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, + .controller_data = &spi_si3xxx_chip_info, + .mode = SPI_MODE_3, + }, +#endif +#if defined(CONFIG_AD5304) || defined(CONFIG_AD5304_MODULE) + { + .modalias = "ad5304_spi", + .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 2, + .platform_data = NULL, + .controller_data = &ad5304_chip_info, + .mode = SPI_MODE_2, + }, +#endif +#if defined(CONFIG_TOUCHSCREEN_AD7877) || defined(CONFIG_TOUCHSCREEN_AD7877_MODULE) + { + .modalias = "ad7877", + .platform_data = &bfin_ad7877_ts_info, + .irq = IRQ_PF6, + .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 1, + .chip_select = 1, + .controller_data = &spi_ad7877_chip_info, + }, +#endif }; /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", +}; +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", }; #endif @@ -390,15 +573,86 @@ static struct platform_device bfin_uart_device = { }; #endif -static struct platform_device *stamp_devices[] __initdata = { -#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) - &rtc_device, +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; #endif +static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, #endif +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + #if defined(CONFIG_USB_SL811_HCD) || defined(CONFIG_USB_SL811_HCD_MODULE) &sl811_hcd_device, #endif @@ -411,6 +665,10 @@ static struct platform_device *stamp_devices[] __initdata = { &smc91x_device, #endif +#if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE) + &dm9000_device, +#endif + #if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) &bfin_mac_device, #endif @@ -420,16 +678,33 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -437,9 +712,21 @@ static int __init stamp_init(void) printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + spi_register_board_info(bfin_spi_board_info, + ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 8806f12..20507e9 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -38,6 +38,7 @@ #include <linux/usb_isp1362.h> #endif #include <linux/irq.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <linux/usb_sl811.h> @@ -130,15 +131,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -323,7 +322,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -336,7 +335,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -348,7 +347,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -357,7 +356,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -366,7 +365,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 7, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -375,7 +374,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -396,24 +395,40 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", }; #endif @@ -469,7 +484,7 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9c43d77..47d7d4a 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -37,10 +37,13 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb_isp1362.h> #endif +#include <linux/pata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb_sl811.h> +#include <asm/dma.h> #include <asm/bfin5xx_spi.h> +#include <asm/reboot.h> #include <linux/spi/ad7877.h> /* @@ -199,15 +202,13 @@ static struct resource sl811_hcd_resources[] = { #if defined(CONFIG_USB_SL811_BFIN_USE_VBUS) void sl811_port_power(struct device *dev, int is_on) { - unsigned short mask = (1 << CONFIG_USB_SL811_BFIN_GPIO_VBUS); - - bfin_write_PORT_FER(bfin_read_PORT_FER() & ~mask); - bfin_write_FIO_DIR(bfin_read_FIO_DIR() | mask); + gpio_request(CONFIG_USB_SL811_BFIN_GPIO_VBUS, "usb:SL811_VBUS"); + gpio_direction_output(CONFIG_USB_SL811_BFIN_GPIO_VBUS); if (is_on) - bfin_write_FIO_FLAG_S(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 1); else - bfin_write_FIO_FLAG_C(mask); + gpio_set_value(CONFIG_USB_SL811_BFIN_GPIO_VBUS, 0); } #endif @@ -407,7 +408,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { /* the modalias must be the same as spi device driver name */ .modalias = "m25p80", /* Name of spi_driver for this device */ .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ .platform_data = &bfin_spi_flash_data, .controller_data = &spi_flash_chip_info, @@ -420,7 +421,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, /* Framework bus number */ + .bus_num = 0, /* Framework bus number */ .chip_select = 1, /* Framework chip select. */ .platform_data = NULL, /* No spi_driver specific config */ .controller_data = &spi_adc_chip_info, @@ -432,7 +433,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad1836-spi", .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, .controller_data = &ad1836_spi_chip_info, }, @@ -441,7 +442,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad9960-spi", .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 1, .controller_data = &ad9960_spi_chip_info, }, @@ -450,7 +451,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc_dummy", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 0, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -459,7 +460,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "spi_mmc", .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = CONFIG_SPI_MMC_CS_CHAN, .platform_data = NULL, .controller_data = &spi_mmc_chip_info, @@ -470,16 +471,16 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "fxs-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 3, + .bus_num = 0, + .chip_select = 8 - CONFIG_J11_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, { .modalias = "fxo-spi", .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, - .chip_select = 2, + .bus_num = 0, + .chip_select = 8 - CONFIG_J19_JUMPER, .controller_data = &spi_si3xxx_chip_info, .mode = SPI_MODE_3, }, @@ -488,7 +489,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad5304_spi", .max_speed_hz = 1250000, /* max spi clock (SCK) speed in HZ */ - .bus_num = 1, + .bus_num = 0, .chip_select = 2, .platform_data = NULL, .controller_data = &ad5304_chip_info, @@ -509,23 +510,45 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }; /* SPI controller data */ -static struct bfin5xx_spi_master spi_bfin_master_info = { +static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, .enable_dma = 1, /* master has the ability to do dma transfer */ }; -static struct platform_device spi_bfin_master_device = { - .name = "bfin-spi-master", - .id = 1, /* Bus number */ +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, .dev = { - .platform_data = &spi_bfin_master_info, /* Passed to driver */ + .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; #endif /* spi master and devices */ #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) static struct platform_device bfin_fb_device = { - .name = "bf537-fb", + .name = "bf537-lq035", +}; +#endif + +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) +static struct platform_device bfin_fb_adv7393_device = { + .name = "bfin-adv7393", }; #endif @@ -551,9 +574,24 @@ static struct platform_device bfin_uart_device = { #endif #if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + static struct platform_device i2c_bfin_twi_device = { .name = "i2c-bfin-twi", .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, }; #endif @@ -569,6 +607,43 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT 55 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 1, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x20314020, + .end = 0x2031403F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2031401C, + .end = 0x2031401F, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, @@ -603,13 +678,17 @@ static struct platform_device *stamp_devices[] __initdata = { #endif #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - &spi_bfin_master_device, + &bfin_spi0_device, #endif #if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE) &bfin_fb_device, #endif +#if defined(CONFIG_FB_BFIN_7393) || defined(CONFIG_FB_BFIN_7393_MODULE) + &bfin_fb_adv7393_device, +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) &bfin_uart_device, #endif @@ -622,6 +701,10 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif }; static int __init stamp_init(void) @@ -632,7 +715,18 @@ static int __init stamp_init(void) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif return 0; } arch_initcall(stamp_init); + +void native_machine_restart(char *cmd) +{ + /* workaround reboot hang when booting from SPI */ + if ((bfin_read_SYSCR() & 0x7) == 0x3) + bfin_gpio_reset_spi0_ssel1(); +} |