m68knommu: move the 520x platform code into the common ColdFire code directory

All these separate directories for each ColdFire CPU SoC varient seems like
overkill. The majority of them only contain a single small config file. Move
these into the common ColdFire code directory.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

2 files changed, 104 insertions, 1 deletions

diff --git a/arch/m68k/platform/coldfire/Makefile b/arch/m68k/platform/coldfire/Makefile
index ef729b1..60c1efa 100644
--- a/arch/m68k/platform/coldfire/Makefile
+++ b/arch/m68k/platform/coldfire/Makefile
@@ -17,7 +17,7 @@ asflags-$(CONFIG_FULLDEBUG) := -DDEBUGGER_COMPATIBLE_CACHE=1
 obj-$(CONFIG_COLDFIRE)	+= cache.o clk.o device.o dma.o entry.o vectors.o
 obj-$(CONFIG_M5206)	+= m5206.o timers.o intc.o reset.o
 obj-$(CONFIG_M5206e)	+= m5206.o timers.o intc.o reset.o
-obj-$(CONFIG_M520x)	+= pit.o intc-simr.o reset.o
+obj-$(CONFIG_M520x)	+= m520x.o pit.o intc-simr.o reset.o
 obj-$(CONFIG_M523x)	+= pit.o dma_timer.o intc-2.o reset.o
 obj-$(CONFIG_M5249)	+= timers.o intc.o reset.o
 obj-$(CONFIG_M527x)	+= pit.o intc-2.o reset.o
diff --git a/arch/m68k/platform/coldfire/m520x.c b/arch/m68k/platform/coldfire/m520x.c
new file mode 100644
index 0000000..3264b88
--- /dev/null
+++ b/arch/m68k/platform/coldfire/m520x.c
@@ -0,0 +1,103 @@
+/***************************************************************************/
+
+/*
+ *  linux/arch/m68knommu/platform/520x/config.c
+ *
+ *  Copyright (C) 2005,      Freescale (www.freescale.com)
+ *  Copyright (C) 2005,      Intec Automation (mike@steroidmicros.com)
+ *  Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
+ *  Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
+ */
+
+/***************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <asm/machdep.h>
+#include <asm/coldfire.h>
+#include <asm/mcfsim.h>
+#include <asm/mcfuart.h>
+#include <asm/mcfgpio.h>
+
+/***************************************************************************/
+
+struct mcf_gpio_chip mcf_gpio_chips[] = {
+	MCFGPS(PIRQ, 0, 8, MCFEPORT_EPDDR, MCFEPORT_EPDR, MCFEPORT_EPPDR),
+	MCFGPF(CS, 9, 3),
+	MCFGPF(FECI2C, 16, 4),
+	MCFGPF(QSPI, 24, 4),
+	MCFGPF(TIMER, 32, 4),
+	MCFGPF(UART, 40, 8),
+	MCFGPF(FECH, 48, 8),
+	MCFGPF(FECL, 56, 8),
+};
+
+unsigned int mcf_gpio_chips_size = ARRAY_SIZE(mcf_gpio_chips);
+
+/***************************************************************************/
+
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+
+static void __init m520x_qspi_init(void)
+{
+	u16 par;
+	/* setup Port QS for QSPI with gpio CS control */
+	writeb(0x3f, MCF_GPIO_PAR_QSPI);
+	/* make U1CTS and U2RTS gpio for cs_control */
+	par = readw(MCF_GPIO_PAR_UART);
+	par &= 0x00ff;
+	writew(par, MCF_GPIO_PAR_UART);
+}
+
+#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
+
+/***************************************************************************/
+
+static void __init m520x_uarts_init(void)
+{
+	u16 par;
+	u8 par2;
+
+	/* UART0 and UART1 GPIO pin setup */
+	par = readw(MCF_GPIO_PAR_UART);
+	par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
+	par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
+	writew(par, MCF_GPIO_PAR_UART);
+
+	/* UART1 GPIO pin setup */
+	par2 = readb(MCF_GPIO_PAR_FECI2C);
+	par2 &= ~0x0F;
+	par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
+		MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
+	writeb(par2, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+static void __init m520x_fec_init(void)
+{
+	u8 v;
+
+	/* Set multi-function pins to ethernet mode */
+	v = readb(MCF_GPIO_PAR_FEC);
+	writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
+
+	v = readb(MCF_GPIO_PAR_FECI2C);
+	writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
+}
+
+/***************************************************************************/
+
+void __init config_BSP(char *commandp, int size)
+{
+	mach_sched_init = hw_timer_init;
+	m520x_uarts_init();
+	m520x_fec_init();
+#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
+	m520x_qspi_init();
+#endif
+}
+
+/***************************************************************************/