diff options
author | Atsushi Nemoto <anemo@mba.ocn.ne.jp> | 2008-07-10 15:31:36 (GMT) |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2008-07-15 17:44:35 (GMT) |
commit | 22b1d707ffc99faebd86257ad19d5bb9fc624734 (patch) | |
tree | 9bd0bcd3878611d74db29e17f3c6e951f4656e61 /arch/mips/tx4938 | |
parent | 14476007c90005c8992b786c15a59cca31f53268 (diff) | |
download | linux-fsl-qoriq-22b1d707ffc99faebd86257ad19d5bb9fc624734.tar.xz |
[MIPS] TXx9: Reorganize code
Move arch/mips/{jmr3927,tx4927,tx4938} into arch/mips/txx9/ tree.
This will help more code sharing and maintainance.
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips/tx4938')
-rw-r--r-- | arch/mips/tx4938/Kconfig | 24 | ||||
-rw-r--r-- | arch/mips/tx4938/common/Makefile | 8 | ||||
-rw-r--r-- | arch/mips/tx4938/common/dbgio.c | 48 | ||||
-rw-r--r-- | arch/mips/tx4938/common/irq.c | 48 | ||||
-rw-r--r-- | arch/mips/tx4938/common/prom.c | 124 | ||||
-rw-r--r-- | arch/mips/tx4938/toshiba_rbtx4938/Makefile | 7 | ||||
-rw-r--r-- | arch/mips/tx4938/toshiba_rbtx4938/irq.c | 161 | ||||
-rw-r--r-- | arch/mips/tx4938/toshiba_rbtx4938/prom.c | 74 | ||||
-rw-r--r-- | arch/mips/tx4938/toshiba_rbtx4938/setup.c | 1124 | ||||
-rw-r--r-- | arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c | 99 |
10 files changed, 0 insertions, 1717 deletions
diff --git a/arch/mips/tx4938/Kconfig b/arch/mips/tx4938/Kconfig deleted file mode 100644 index d90e9cd..0000000 --- a/arch/mips/tx4938/Kconfig +++ /dev/null @@ -1,24 +0,0 @@ -if TOSHIBA_RBTX4938 - -comment "Multiplex Pin Select" -choice - prompt "PIO[58:61]" - default TOSHIBA_RBTX4938_MPLEX_PIO58_61 - -config TOSHIBA_RBTX4938_MPLEX_PIO58_61 - bool "PIO" -config TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND" -config TOSHIBA_RBTX4938_MPLEX_ATA - bool "ATA" - -endchoice - -config TX4938_NAND_BOOT - depends on EXPERIMENTAL && TOSHIBA_RBTX4938_MPLEX_NAND - bool "NAND Boot Support (EXPERIMENTAL)" - help - This is only for Toshiba RBTX4938 reference board, which has NAND IPL. - Select this option if you need to use NAND boot. - -endif diff --git a/arch/mips/tx4938/common/Makefile b/arch/mips/tx4938/common/Makefile deleted file mode 100644 index 56aa1ed..0000000 --- a/arch/mips/tx4938/common/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += prom.o irq.o -obj-$(CONFIG_KGDB) += dbgio.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/common/dbgio.c b/arch/mips/tx4938/common/dbgio.c deleted file mode 100644 index 33b9c67..0000000 --- a/arch/mips/tx4938/common/dbgio.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/dbgio.c - * - * kgdb interface for gdb - * - * Author: MontaVista Software, Inc. - * source@mvista.com - * - * Copyright 2005 MontaVista Software Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. - * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, - * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS - * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND - * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR - * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE - * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Support for TX4938 in 2.6 - Hiroshi DOYU <Hiroshi_DOYU@montavista.co.jp> - */ - -#include <linux/types> - -extern u8 txx9_sio_kdbg_rd(void); -extern int txx9_sio_kdbg_wr( u8 ch ); - -u8 getDebugChar(void) -{ - return (txx9_sio_kdbg_rd()); -} - -int putDebugChar(u8 byte) -{ - return (txx9_sio_kdbg_wr(byte)); -} - diff --git a/arch/mips/tx4938/common/irq.c b/arch/mips/tx4938/common/irq.c deleted file mode 100644 index c059b89..0000000 --- a/arch/mips/tx4938/common/irq.c +++ /dev/null @@ -1,48 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/irq.c - * - * Common tx4938 irq handler - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <asm/tx4938/rbtx4938.h> - -void __init -tx4938_irq_init(void) -{ - mips_cpu_irq_init(); - txx9_irq_init(TX4938_IRC_REG); - set_irq_chained_handler(TX4938_IRQ_NEST_PIC_ON_CP0, handle_simple_irq); -} - -int toshiba_rbtx4938_irq_nested(int irq); - -asmlinkage void plat_irq_dispatch(void) -{ - unsigned int pending = read_c0_cause() & read_c0_status(); - - if (pending & STATUSF_IP7) - do_IRQ(TX4938_IRQ_CPU_TIMER); - else if (pending & STATUSF_IP2) { - int irq = txx9_irq(); - if (irq == TX4938_IRQ_PIC_BEG + TX4938_IR_INT(0)) - irq = toshiba_rbtx4938_irq_nested(irq); - if (irq >= 0) - do_IRQ(irq); - else - spurious_interrupt(); - } else if (pending & STATUSF_IP1) - do_IRQ(TX4938_IRQ_USER1); - else if (pending & STATUSF_IP0) - do_IRQ(TX4938_IRQ_USER0); -} diff --git a/arch/mips/tx4938/common/prom.c b/arch/mips/tx4938/common/prom.c deleted file mode 100644 index 20baeae..0000000 --- a/arch/mips/tx4938/common/prom.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * linux/arch/mips/tx4938/common/prom.c - * - * common tx4938 memory interface - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#include <linux/init.h> -#include <linux/types.h> -#include <linux/io.h> - -static unsigned int __init -tx4938_process_sdccr(u64 * addr) -{ - u64 val; - unsigned int sdccr_ce; - unsigned int sdccr_rs; - unsigned int sdccr_cs; - unsigned int sdccr_mw; - unsigned int rs = 0; - unsigned int cs = 0; - unsigned int mw = 0; - unsigned int bc = 4; - unsigned int msize = 0; - - val = ____raw_readq((void __iomem *)addr); - - /* MVMCP -- need #defs for these bits masks */ - sdccr_ce = ((val & (1 << 10)) >> 10); - sdccr_rs = ((val & (3 << 5)) >> 5); - sdccr_cs = ((val & (7 << 2)) >> 2); - sdccr_mw = ((val & (1 << 0)) >> 0); - - if (sdccr_ce) { - switch (sdccr_rs) { - case 0:{ - rs = 2048; - break; - } - case 1:{ - rs = 4096; - break; - } - case 2:{ - rs = 8192; - break; - } - default:{ - rs = 0; - break; - } - } - switch (sdccr_cs) { - case 0:{ - cs = 256; - break; - } - case 1:{ - cs = 512; - break; - } - case 2:{ - cs = 1024; - break; - } - case 3:{ - cs = 2048; - break; - } - case 4:{ - cs = 4096; - break; - } - default:{ - cs = 0; - break; - } - } - switch (sdccr_mw) { - case 0:{ - mw = 8; - break; - } /* 8 bytes = 64 bits */ - case 1:{ - mw = 4; - break; - } /* 4 bytes = 32 bits */ - } - } - - /* bytes per chip MB per chip bank count */ - msize = (((rs * cs * mw) / (1024 * 1024)) * (bc)); - - /* MVMCP -- bc hard coded to 4 from table 9.3.1 */ - /* boad supports bc=2 but no way to detect */ - - return (msize); -} - -unsigned int __init -tx4938_get_mem_size(void) -{ - unsigned int c0; - unsigned int c1; - unsigned int c2; - unsigned int c3; - unsigned int total; - - /* MVMCP -- need #defs for these registers */ - c0 = tx4938_process_sdccr((u64 *) 0xff1f8000); - c1 = tx4938_process_sdccr((u64 *) 0xff1f8008); - c2 = tx4938_process_sdccr((u64 *) 0xff1f8010); - c3 = tx4938_process_sdccr((u64 *) 0xff1f8018); - total = c0 + c1 + c2 + c3; - - return (total); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/Makefile b/arch/mips/tx4938/toshiba_rbtx4938/Makefile deleted file mode 100644 index 2316dd7..0000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# Makefile for common code for Toshiba TX4927 based systems -# - -obj-y += prom.o setup.o irq.o spi_eeprom.o - -EXTRA_CFLAGS += -Werror diff --git a/arch/mips/tx4938/toshiba_rbtx4938/irq.c b/arch/mips/tx4938/toshiba_rbtx4938/irq.c deleted file mode 100644 index 4d6a8dc..0000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/irq.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/irq.c - * - * Toshiba RBTX4938 specific interrupt handlers - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -/* -IRQ Device - -16 TX4938-CP0/00 Software 0 -17 TX4938-CP0/01 Software 1 -18 TX4938-CP0/02 Cascade TX4938-CP0 -19 TX4938-CP0/03 Multiplexed -- do not use -20 TX4938-CP0/04 Multiplexed -- do not use -21 TX4938-CP0/05 Multiplexed -- do not use -22 TX4938-CP0/06 Multiplexed -- do not use -23 TX4938-CP0/07 CPU TIMER - -24 TX4938-PIC/00 -25 TX4938-PIC/01 -26 TX4938-PIC/02 Cascade RBTX4938-IOC -27 TX4938-PIC/03 RBTX4938 RTL-8019AS Ethernet -28 TX4938-PIC/04 -29 TX4938-PIC/05 TX4938 ETH1 -30 TX4938-PIC/06 TX4938 ETH0 -31 TX4938-PIC/07 -32 TX4938-PIC/08 TX4938 SIO 0 -33 TX4938-PIC/09 TX4938 SIO 1 -34 TX4938-PIC/10 TX4938 DMA0 -35 TX4938-PIC/11 TX4938 DMA1 -36 TX4938-PIC/12 TX4938 DMA2 -37 TX4938-PIC/13 TX4938 DMA3 -38 TX4938-PIC/14 -39 TX4938-PIC/15 -40 TX4938-PIC/16 TX4938 PCIC -41 TX4938-PIC/17 TX4938 TMR0 -42 TX4938-PIC/18 TX4938 TMR1 -43 TX4938-PIC/19 TX4938 TMR2 -44 TX4938-PIC/20 -45 TX4938-PIC/21 -46 TX4938-PIC/22 TX4938 PCIERR -47 TX4938-PIC/23 -48 TX4938-PIC/24 -49 TX4938-PIC/25 -50 TX4938-PIC/26 -51 TX4938-PIC/27 -52 TX4938-PIC/28 -53 TX4938-PIC/29 -54 TX4938-PIC/30 -55 TX4938-PIC/31 TX4938 SPI - -56 RBTX4938-IOC/00 PCI-D -57 RBTX4938-IOC/01 PCI-C -58 RBTX4938-IOC/02 PCI-B -59 RBTX4938-IOC/03 PCI-A -60 RBTX4938-IOC/04 RTC -61 RBTX4938-IOC/05 ATA -62 RBTX4938-IOC/06 MODEM -63 RBTX4938-IOC/07 SWINT -*/ -#include <linux/init.h> -#include <linux/interrupt.h> -#include <asm/tx4938/rbtx4938.h> - -static void toshiba_rbtx4938_irq_ioc_enable(unsigned int irq); -static void toshiba_rbtx4938_irq_ioc_disable(unsigned int irq); - -#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC" -static struct irq_chip toshiba_rbtx4938_irq_ioc_type = { - .name = TOSHIBA_RBTX4938_IOC_NAME, - .ack = toshiba_rbtx4938_irq_ioc_disable, - .mask = toshiba_rbtx4938_irq_ioc_disable, - .mask_ack = toshiba_rbtx4938_irq_ioc_disable, - .unmask = toshiba_rbtx4938_irq_ioc_enable, -}; - -int -toshiba_rbtx4938_irq_nested(int sw_irq) -{ - u8 level3; - - level3 = readb(rbtx4938_imstat_addr); - if (level3) - /* must use fls so onboard ATA has priority */ - sw_irq = TOSHIBA_RBTX4938_IRQ_IOC_BEG + fls(level3) - 1; - - return sw_irq; -} - -static struct irqaction toshiba_rbtx4938_irq_ioc_action = { - .handler = no_action, - .flags = 0, - .mask = CPU_MASK_NONE, - .name = TOSHIBA_RBTX4938_IOC_NAME, -}; - -/**********************************************************************************/ -/* Functions for ioc */ -/**********************************************************************************/ -static void __init -toshiba_rbtx4938_irq_ioc_init(void) -{ - int i; - - for (i = TOSHIBA_RBTX4938_IRQ_IOC_BEG; - i <= TOSHIBA_RBTX4938_IRQ_IOC_END; i++) - set_irq_chip_and_handler(i, &toshiba_rbtx4938_irq_ioc_type, - handle_level_irq); - - setup_irq(RBTX4938_IRQ_IOCINT, - &toshiba_rbtx4938_irq_ioc_action); -} - -static void -toshiba_rbtx4938_irq_ioc_enable(unsigned int irq) -{ - unsigned char v; - - v = readb(rbtx4938_imask_addr); - v |= (1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - writeb(v, rbtx4938_imask_addr); - mmiowb(); -} - -static void -toshiba_rbtx4938_irq_ioc_disable(unsigned int irq) -{ - unsigned char v; - - v = readb(rbtx4938_imask_addr); - v &= ~(1 << (irq - TOSHIBA_RBTX4938_IRQ_IOC_BEG)); - writeb(v, rbtx4938_imask_addr); - mmiowb(); -} - -void __init arch_init_irq(void) -{ - extern void tx4938_irq_init(void); - - /* Now, interrupt control disabled, */ - /* all IRC interrupts are masked, */ - /* all IRC interrupt mode are Low Active. */ - - /* mask all IOC interrupts */ - writeb(0, rbtx4938_imask_addr); - - /* clear SoftInt interrupts */ - writeb(0, rbtx4938_softint_addr); - tx4938_irq_init(); - toshiba_rbtx4938_irq_ioc_init(); - /* Onboard 10M Ether: High Active */ - set_irq_type(RBTX4938_IRQ_ETHER, IRQF_TRIGGER_HIGH); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/prom.c b/arch/mips/tx4938/toshiba_rbtx4938/prom.c deleted file mode 100644 index 1644bff..0000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/prom.c +++ /dev/null @@ -1,74 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/prom.c - * - * rbtx4938 specific prom routines - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ - -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> - -#include <asm/addrspace.h> -#include <asm/bootinfo.h> -#include <asm/tx4938/tx4938.h> - -void __init prom_init_cmdline(void) -{ - int argc = (int) fw_arg0; - char **argv = (char **) fw_arg1; - int i; - - /* ignore all built-in args if any f/w args given */ - if (argc > 1) { - *arcs_cmdline = '\0'; - } - - for (i = 1; i < argc; i++) { - if (i != 1) { - strcat(arcs_cmdline, " "); - } - strcat(arcs_cmdline, argv[i]); - } -} - -void __init prom_init(void) -{ - extern int tx4938_get_mem_size(void); - int msize; -#ifndef CONFIG_TX4938_NAND_BOOT - prom_init_cmdline(); -#endif - - msize = tx4938_get_mem_size(); - add_memory_region(0, msize << 20, BOOT_MEM_RAM); - - return; -} - -void __init prom_free_prom_memory(void) -{ -} - -void __init prom_fixup_mem_map(unsigned long start, unsigned long end) -{ - return; -} - -const char *get_system_type(void) -{ - return "Toshiba RBTX4938"; -} - -char * __init prom_getcmdline(void) -{ - return &(arcs_cmdline[0]); -} diff --git a/arch/mips/tx4938/toshiba_rbtx4938/setup.c b/arch/mips/tx4938/toshiba_rbtx4938/setup.c deleted file mode 100644 index 3a3659e..0000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/setup.c +++ /dev/null @@ -1,1124 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/setup.c - * - * Setup pointers to hardware-dependent routines. - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include <linux/init.h> -#include <linux/types.h> -#include <linux/ioport.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/console.h> -#include <linux/pci.h> -#include <linux/pm.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/gpio.h> - -#include <asm/reboot.h> -#include <asm/time.h> -#include <asm/txx9tmr.h> -#include <asm/io.h> -#include <asm/bootinfo.h> -#include <asm/tx4938/rbtx4938.h> -#ifdef CONFIG_SERIAL_TXX9 -#include <linux/serial_core.h> -#endif -#include <linux/spi/spi.h> -#include <asm/tx4938/spi.h> -#include <asm/txx9pio.h> - -extern char * __init prom_getcmdline(void); -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr); - -/* These functions are used for rebooting or halting the machine*/ -extern void rbtx4938_machine_restart(char *command); -extern void rbtx4938_machine_halt(void); -extern void rbtx4938_machine_power_off(void); - -/* clocks */ -unsigned int txx9_master_clock; -unsigned int txx9_cpu_clock; -unsigned int txx9_gbus_clock; - -unsigned long rbtx4938_ce_base[8]; -unsigned long rbtx4938_ce_size[8]; -int txboard_pci66_mode; -static int tx4938_pcic_trdyto; /* default: disabled */ -static int tx4938_pcic_retryto; /* default: disabled */ -static int tx4938_ccfg_toeon = 1; - -struct tx4938_pcic_reg *pcicptrs[4] = { - tx4938_pcicptr /* default setting for TX4938 */ -}; - -static struct { - unsigned long base; - unsigned long size; -} phys_regions[16] __initdata; -static int num_phys_regions __initdata; - -#define PHYS_REGION_MINSIZE 0x10000 - -void rbtx4938_machine_halt(void) -{ - printk(KERN_NOTICE "System Halted\n"); - local_irq_disable(); - - while (1) - __asm__(".set\tmips3\n\t" - "wait\n\t" - ".set\tmips0"); -} - -void rbtx4938_machine_power_off(void) -{ - rbtx4938_machine_halt(); - /* no return */ -} - -void rbtx4938_machine_restart(char *command) -{ - local_irq_disable(); - - printk("Rebooting..."); - writeb(1, rbtx4938_softresetlock_addr); - writeb(1, rbtx4938_sfvol_addr); - writeb(1, rbtx4938_softreset_addr); - while(1) - ; -} - -void __init -txboard_add_phys_region(unsigned long base, unsigned long size) -{ - if (num_phys_regions >= ARRAY_SIZE(phys_regions)) { - printk("phys_region overflow\n"); - return; - } - phys_regions[num_phys_regions].base = base; - phys_regions[num_phys_regions].size = size; - num_phys_regions++; -} -unsigned long __init -txboard_find_free_phys_region(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - int i; - - for (base = begin / size * size; base < end; base += size) { - for (i = 0; i < num_phys_regions; i++) { - if (phys_regions[i].size && - base <= phys_regions[i].base + (phys_regions[i].size - 1) && - base + (size - 1) >= phys_regions[i].base) - break; - } - if (i == num_phys_regions) - return base; - } - return 0; -} -unsigned long __init -txboard_find_free_phys_region_shrink(unsigned long begin, unsigned long end, - unsigned long *size) -{ - unsigned long sz, base; - for (sz = *size; sz >= PHYS_REGION_MINSIZE; sz /= 2) { - base = txboard_find_free_phys_region(begin, end, sz); - if (base) { - *size = sz; - return base; - } - } - return 0; -} -unsigned long __init -txboard_request_phys_region_range(unsigned long begin, unsigned long end, - unsigned long size) -{ - unsigned long base; - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region(unsigned long size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region(begin, end, size); - if (base) - txboard_add_phys_region(base, size); - return base; -} -unsigned long __init -txboard_request_phys_region_shrink(unsigned long *size) -{ - unsigned long base; - unsigned long begin = 0, end = 0x20000000; /* search low 512MB */ - base = txboard_find_free_phys_region_shrink(begin, end, size); - if (base) - txboard_add_phys_region(base, *size); - return base; -} - -#ifdef CONFIG_PCI -void __init -tx4938_pcic_setup(struct tx4938_pcic_reg *pcicptr, - struct pci_controller *channel, - unsigned long pci_io_base, - int extarb) -{ - int i; - - /* Disable All Initiator Space */ - pcicptr->pciccfg &= ~(TX4938_PCIC_PCICCFG_G2PMEN(0)| - TX4938_PCIC_PCICCFG_G2PMEN(1)| - TX4938_PCIC_PCICCFG_G2PMEN(2)| - TX4938_PCIC_PCICCFG_G2PIOEN); - - /* GB->PCI mappings */ - pcicptr->g2piomask = (channel->io_resource->end - channel->io_resource->start) >> 4; - pcicptr->g2piogbase = pci_io_base | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PIOGBASE_ECHG -#else - TX4938_PCIC_G2PIOGBASE_BSDIS -#endif - ; - pcicptr->g2piopbase = 0; - for (i = 0; i < 3; i++) { - pcicptr->g2pmmask[i] = 0; - pcicptr->g2pmgbase[i] = 0; - pcicptr->g2pmpbase[i] = 0; - } - if (channel->mem_resource->end) { - pcicptr->g2pmmask[0] = (channel->mem_resource->end - channel->mem_resource->start) >> 4; - pcicptr->g2pmgbase[0] = channel->mem_resource->start | -#ifdef __BIG_ENDIAN - TX4938_PCIC_G2PMnGBASE_ECHG -#else - TX4938_PCIC_G2PMnGBASE_BSDIS -#endif - ; - pcicptr->g2pmpbase[0] = channel->mem_resource->start; - } - /* PCI->GB mappings (I/O 256B) */ - pcicptr->p2giopbase = 0; /* 256B */ - pcicptr->p2giogbase = 0; - /* PCI->GB mappings (MEM 512MB (64MB on R1.x)) */ - pcicptr->p2gm0plbase = 0; - pcicptr->p2gm0pubase = 0; - pcicptr->p2gmgbase[0] = 0 | - TX4938_PCIC_P2GMnGBASE_TMEMEN | -#ifdef __BIG_ENDIAN - TX4938_PCIC_P2GMnGBASE_TECHG -#else - TX4938_PCIC_P2GMnGBASE_TBSDIS -#endif - ; - /* PCI->GB mappings (MEM 16MB) */ - pcicptr->p2gm1plbase = 0xffffffff; - pcicptr->p2gm1pubase = 0xffffffff; - pcicptr->p2gmgbase[1] = 0; - /* PCI->GB mappings (MEM 1MB) */ - pcicptr->p2gm2pbase = 0xffffffff; /* 1MB */ - pcicptr->p2gmgbase[2] = 0; - - pcicptr->pciccfg &= TX4938_PCIC_PCICCFG_GBWC_MASK; - /* Enable Initiator Memory Space */ - if (channel->mem_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PMEN(0); - /* Enable Initiator I/O Space */ - if (channel->io_resource->end) - pcicptr->pciccfg |= TX4938_PCIC_PCICCFG_G2PIOEN; - /* Enable Initiator Config */ - pcicptr->pciccfg |= - TX4938_PCIC_PCICCFG_ICAEN | - TX4938_PCIC_PCICCFG_TCAR; - - /* Do not use MEMMUL, MEMINF: YMFPCI card causes M_ABORT. */ - pcicptr->pcicfg1 = 0; - - pcicptr->g2ptocnt &= ~0xffff; - - if (tx4938_pcic_trdyto >= 0) { - pcicptr->g2ptocnt &= ~0xff; - pcicptr->g2ptocnt |= (tx4938_pcic_trdyto & 0xff); - } - - if (tx4938_pcic_retryto >= 0) { - pcicptr->g2ptocnt &= ~0xff00; - pcicptr->g2ptocnt |= ((tx4938_pcic_retryto<<8) & 0xff00); - } - - /* Clear All Local Bus Status */ - pcicptr->pcicstatus = TX4938_PCIC_PCICSTATUS_ALL; - /* Enable All Local Bus Interrupts */ - pcicptr->pcicmask = TX4938_PCIC_PCICSTATUS_ALL; - /* Clear All Initiator Status */ - pcicptr->g2pstatus = TX4938_PCIC_G2PSTATUS_ALL; - /* Enable All Initiator Interrupts */ - pcicptr->g2pmask = TX4938_PCIC_G2PSTATUS_ALL; - /* Clear All PCI Status Error */ - pcicptr->pcistatus = - (pcicptr->pcistatus & 0x0000ffff) | - (TX4938_PCIC_PCISTATUS_ALL << 16); - /* Enable All PCI Status Error Interrupts */ - pcicptr->pcimask = TX4938_PCIC_PCISTATUS_ALL; - - if (!extarb) { - /* Reset Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_RPBA; - pcicptr->pbabm = 0; - /* Enable Bus Arbiter */ - pcicptr->pbacfg = TX4938_PCIC_PBACFG_PBAEN; - } - - /* PCIC Int => IRC IRQ16 */ - pcicptr->pcicfg2 = - (pcicptr->pcicfg2 & 0xffffff00) | TX4938_IR_PCIC; - - pcicptr->pcistatus = PCI_COMMAND_MASTER | - PCI_COMMAND_MEMORY | - PCI_COMMAND_PARITY | PCI_COMMAND_SERR; -} - -int __init -tx4938_report_pciclk(void) -{ - unsigned long pcode = TX4938_REV_PCODE(); - int pciclk = 0; - printk("TX%lx PCIC --%s PCICLK:", - pcode, - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) ? " PCI66" : ""); - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - - switch ((unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK) { - case TX4938_CCFG_PCIDIVMODE_4: - pciclk = txx9_cpu_clock / 4; break; - case TX4938_CCFG_PCIDIVMODE_4_5: - pciclk = txx9_cpu_clock * 2 / 9; break; - case TX4938_CCFG_PCIDIVMODE_5: - pciclk = txx9_cpu_clock / 5; break; - case TX4938_CCFG_PCIDIVMODE_5_5: - pciclk = txx9_cpu_clock * 2 / 11; break; - case TX4938_CCFG_PCIDIVMODE_8: - pciclk = txx9_cpu_clock / 8; break; - case TX4938_CCFG_PCIDIVMODE_9: - pciclk = txx9_cpu_clock / 9; break; - case TX4938_CCFG_PCIDIVMODE_10: - pciclk = txx9_cpu_clock / 10; break; - case TX4938_CCFG_PCIDIVMODE_11: - pciclk = txx9_cpu_clock / 11; break; - } - printk("Internal(%dMHz)", pciclk / 1000000); - } else { - printk("External"); - pciclk = -1; - } - printk("\n"); - return pciclk; -} - -void __init set_tx4938_pcicptr(int ch, struct tx4938_pcic_reg *pcicptr) -{ - pcicptrs[ch] = pcicptr; -} - -struct tx4938_pcic_reg *get_tx4938_pcicptr(int ch) -{ - return pcicptrs[ch]; -} - -static struct pci_dev *fake_pci_dev(struct pci_controller *hose, - int top_bus, int busnr, int devfn) -{ - static struct pci_dev dev; - static struct pci_bus bus; - - dev.sysdata = bus.sysdata = hose; - dev.devfn = devfn; - bus.number = busnr; - bus.ops = hose->pci_ops; - bus.parent = NULL; - dev.bus = &bus; - - return &dev; -} - -#define EARLY_PCI_OP(rw, size, type) \ -static int early_##rw##_config_##size(struct pci_controller *hose, \ - int top_bus, int bus, int devfn, int offset, type value) \ -{ \ - return pci_##rw##_config_##size( \ - fake_pci_dev(hose, top_bus, bus, devfn), \ - offset, value); \ -} - -EARLY_PCI_OP(read, word, u16 *) - -int txboard_pci66_check(struct pci_controller *hose, int top_bus, int current_bus) -{ - u32 pci_devfn; - unsigned short vid; - int devfn_start = 0; - int devfn_stop = 0xff; - int cap66 = -1; - u16 stat; - - printk("PCI: Checking 66MHz capabilities...\n"); - - for (pci_devfn=devfn_start; pci_devfn<devfn_stop; pci_devfn++) { - if (early_read_config_word(hose, top_bus, current_bus, - pci_devfn, PCI_VENDOR_ID, - &vid) != PCIBIOS_SUCCESSFUL) - continue; - - if (vid == 0xffff) continue; - - /* check 66MHz capability */ - if (cap66 < 0) - cap66 = 1; - if (cap66) { - early_read_config_word(hose, top_bus, current_bus, pci_devfn, - PCI_STATUS, &stat); - if (!(stat & PCI_STATUS_66MHZ)) { - printk(KERN_DEBUG "PCI: %02x:%02x not 66MHz capable.\n", - current_bus, pci_devfn); - cap66 = 0; - break; - } - } - } - return cap66 > 0; -} - -int __init -tx4938_pciclk66_setup(void) -{ - int pciclk; - - /* Assert M66EN */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI66; - /* Double PCICLK (if possible) */ - if (tx4938_ccfgptr->pcfg & TX4938_PCFG_PCICLKEN_ALL) { - unsigned int pcidivmode = - tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIDIVMODE_MASK; - switch (pcidivmode) { - case TX4938_CCFG_PCIDIVMODE_8: - case TX4938_CCFG_PCIDIVMODE_4: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4; - pciclk = txx9_cpu_clock / 4; - break; - case TX4938_CCFG_PCIDIVMODE_9: - case TX4938_CCFG_PCIDIVMODE_4_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_4_5; - pciclk = txx9_cpu_clock * 2 / 9; - break; - case TX4938_CCFG_PCIDIVMODE_10: - case TX4938_CCFG_PCIDIVMODE_5: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5; - pciclk = txx9_cpu_clock / 5; - break; - case TX4938_CCFG_PCIDIVMODE_11: - case TX4938_CCFG_PCIDIVMODE_5_5: - default: - pcidivmode = TX4938_CCFG_PCIDIVMODE_5_5; - pciclk = txx9_cpu_clock * 2 / 11; - break; - } - tx4938_ccfgptr->ccfg = - (tx4938_ccfgptr->ccfg & ~TX4938_CCFG_PCIDIVMODE_MASK) - | pcidivmode; - printk(KERN_DEBUG "PCICLK: ccfg:%08lx\n", - (unsigned long)tx4938_ccfgptr->ccfg); - } else { - pciclk = -1; - } - return pciclk; -} - -extern struct pci_controller tx4938_pci_controller[]; -static int __init tx4938_pcibios_init(void) -{ - unsigned long mem_base[2]; - unsigned long mem_size[2] = {TX4938_PCIMEM_SIZE_0, TX4938_PCIMEM_SIZE_1}; /* MAX 128M,64K */ - unsigned long io_base[2]; - unsigned long io_size[2] = {TX4938_PCIIO_SIZE_0, TX4938_PCIIO_SIZE_1}; /* MAX 16M,64K */ - /* TX4938 PCIC1: 64K MEM/IO is enough for ETH0,ETH1 */ - int extarb = !(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB); - - PCIBIOS_MIN_IO = 0x00001000UL; - - mem_base[0] = txboard_request_phys_region_shrink(&mem_size[0]); - io_base[0] = txboard_request_phys_region_shrink(&io_size[0]); - - printk("TX4938 PCIC -- DID:%04x VID:%04x RID:%02x Arbiter:%s\n", - (unsigned short)(tx4938_pcicptr->pciid >> 16), - (unsigned short)(tx4938_pcicptr->pciid & 0xffff), - (unsigned short)(tx4938_pcicptr->pciccrev & 0xff), - extarb ? "External" : "Internal"); - - /* setup PCI area */ - tx4938_pci_controller[0].io_resource->start = io_base[0]; - tx4938_pci_controller[0].io_resource->end = (io_base[0] + io_size[0]) - 1; - tx4938_pci_controller[0].mem_resource->start = mem_base[0]; - tx4938_pci_controller[0].mem_resource->end = mem_base[0] + mem_size[0] - 1; - - set_tx4938_pcicptr(0, tx4938_pcicptr); - - register_pci_controller(&tx4938_pci_controller[0]); - - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI66) { - printk("TX4938_CCFG_PCI66 already configured\n"); - txboard_pci66_mode = -1; /* already configured */ - } - - /* Reset PCI Bus */ - writeb(0, rbtx4938_pcireset_addr); - /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - if (txboard_pci66_mode > 0) - tx4938_pciclk66_setup(); - mdelay(10); - /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - tx4938_report_pcic_status1(tx4938_pcicptr); - - tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - if (txboard_pci66_mode == 0 && - txboard_pci66_check(&tx4938_pci_controller[0], 0, 0)) { - /* Reset PCI Bus */ - writeb(0, rbtx4938_pcireset_addr); - /* Reset PCIC */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIRST; - tx4938_pciclk66_setup(); - mdelay(10); - /* clear PCIC reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIRST; - writeb(1, rbtx4938_pcireset_addr); - mmiowb(); - /* Reinitialize PCIC */ - tx4938_report_pciclk(); - tx4938_pcic_setup(tx4938_pcicptr, &tx4938_pci_controller[0], io_base[0], extarb); - } - - mem_base[1] = txboard_request_phys_region_shrink(&mem_size[1]); - io_base[1] = txboard_request_phys_region_shrink(&io_size[1]); - /* Reset PCIC1 */ - tx4938_ccfgptr->clkctr |= TX4938_CLKCTR_PCIC1RST; - /* PCI1DMD==0 => PCI1CLK==GBUSCLK/2 => PCI66 */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD)) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_PCI1_66; - else - tx4938_ccfgptr->ccfg &= ~TX4938_CCFG_PCI1_66; - mdelay(10); - /* clear PCIC1 reset */ - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - tx4938_report_pcic_status1(tx4938_pcic1ptr); - - printk("TX4938 PCIC1 -- DID:%04x VID:%04x RID:%02x", - (unsigned short)(tx4938_pcic1ptr->pciid >> 16), - (unsigned short)(tx4938_pcic1ptr->pciid & 0xffff), - (unsigned short)(tx4938_pcic1ptr->pciccrev & 0xff)); - printk("%s PCICLK:%dMHz\n", - (tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1_66) ? " PCI66" : "", - txx9_gbus_clock / - ((tx4938_ccfgptr->ccfg & TX4938_CCFG_PCI1DMD) ? 4 : 2) / - 1000000); - - /* assumption: CPHYSADDR(mips_io_port_base) == io_base[0] */ - tx4938_pci_controller[1].io_resource->start = - io_base[1] - io_base[0]; - tx4938_pci_controller[1].io_resource->end = - io_base[1] - io_base[0] + io_size[1] - 1; - tx4938_pci_controller[1].mem_resource->start = mem_base[1]; - tx4938_pci_controller[1].mem_resource->end = - mem_base[1] + mem_size[1] - 1; - set_tx4938_pcicptr(1, tx4938_pcic1ptr); - - register_pci_controller(&tx4938_pci_controller[1]); - - tx4938_pcic_setup(tx4938_pcic1ptr, &tx4938_pci_controller[1], io_base[1], extarb); - - /* map ioport 0 to PCI I/O space address 0 */ - set_io_port_base(KSEG1 + io_base[0]); - - return 0; -} - -arch_initcall(tx4938_pcibios_init); - -#endif /* CONFIG_PCI */ - -/* SPI support */ - -/* chip select for SPI devices */ -#define SEEPROM1_CS 7 /* PIO7 */ -#define SEEPROM2_CS 0 /* IOC */ -#define SEEPROM3_CS 1 /* IOC */ -#define SRTC_CS 2 /* IOC */ - -#ifdef CONFIG_PCI -static int __init rbtx4938_ethaddr_init(void) -{ - unsigned char dat[17]; - unsigned char sum; - int i; - - /* 0-3: "MAC\0", 4-9:eth0, 10-15:eth1, 16:sum */ - if (spi_eeprom_read(SEEPROM1_CS, 0, dat, sizeof(dat))) { - printk(KERN_ERR "seeprom: read error.\n"); - return -ENODEV; - } else { - if (strcmp(dat, "MAC") != 0) - printk(KERN_WARNING "seeprom: bad signature.\n"); - for (i = 0, sum = 0; i < sizeof(dat); i++) - sum += dat[i]; - if (sum) - printk(KERN_WARNING "seeprom: bad checksum.\n"); - } - for (i = 0; i < 2; i++) { - unsigned int id = - TXX9_IRQ_BASE + (i ? TX4938_IR_ETH1 : TX4938_IR_ETH0); - struct platform_device *pdev; - if (!(tx4938_ccfgptr->pcfg & - (i ? TX4938_PCFG_ETH1_SEL : TX4938_PCFG_ETH0_SEL))) - continue; - pdev = platform_device_alloc("tc35815-mac", id); - if (!pdev || - platform_device_add_data(pdev, &dat[4 + 6 * i], 6) || - platform_device_add(pdev)) - platform_device_put(pdev); - } - return 0; -} -device_initcall(rbtx4938_ethaddr_init); -#endif /* CONFIG_PCI */ - -static void __init rbtx4938_spi_setup(void) -{ - /* set SPI_SEL */ - tx4938_ccfgptr->pcfg |= TX4938_PCFG_SPI_SEL; -} - -static struct resource rbtx4938_fpga_resource; - -static char pcode_str[8]; -static struct resource tx4938_reg_resource = { - .start = TX4938_REG_BASE, - .end = TX4938_REG_BASE + TX4938_REG_SIZE, - .name = pcode_str, - .flags = IORESOURCE_MEM -}; - -void __init tx4938_board_setup(void) -{ - int i; - unsigned long divmode; - int cpuclk = 0; - unsigned long pcode = TX4938_REV_PCODE(); - - ioport_resource.start = 0x1000; - ioport_resource.end = 0xffffffff; - iomem_resource.start = 0x1000; - iomem_resource.end = 0xffffffff; /* expand to 4GB */ - - sprintf(pcode_str, "TX%lx", pcode); - /* SDRAMC,EBUSC are configured by PROM */ - for (i = 0; i < 8; i++) { - if (!(tx4938_ebuscptr->cr[i] & 0x8)) - continue; /* disabled */ - rbtx4938_ce_base[i] = (unsigned long)TX4938_EBUSC_BA(i); - txboard_add_phys_region(rbtx4938_ce_base[i], TX4938_EBUSC_SIZE(i)); - } - - /* clocks */ - if (txx9_master_clock) { - /* calculate gbus_clock and cpu_clock_freq from master_clock */ - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = txx9_master_clock * 4; break; - default: - txx9_gbus_clock = txx9_master_clock; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - cpuclk = txx9_gbus_clock * 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - cpuclk = txx9_gbus_clock * 5 / 2; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - cpuclk = txx9_gbus_clock * 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - cpuclk = txx9_gbus_clock * 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - cpuclk = txx9_gbus_clock * 9 / 2; break; - } - txx9_cpu_clock = cpuclk; - } else { - if (txx9_cpu_clock == 0) { - txx9_cpu_clock = 300000000; /* 300MHz */ - } - /* calculate gbus_clock and master_clock from cpu_clock_freq */ - cpuclk = txx9_cpu_clock; - divmode = (unsigned long)tx4938_ccfgptr->ccfg & TX4938_CCFG_DIVMODE_MASK; - switch (divmode) { - case TX4938_CCFG_DIVMODE_2: - case TX4938_CCFG_DIVMODE_8: - txx9_gbus_clock = cpuclk / 2; break; - case TX4938_CCFG_DIVMODE_2_5: - case TX4938_CCFG_DIVMODE_10: - txx9_gbus_clock = cpuclk * 2 / 5; break; - case TX4938_CCFG_DIVMODE_3: - case TX4938_CCFG_DIVMODE_12: - txx9_gbus_clock = cpuclk / 3; break; - case TX4938_CCFG_DIVMODE_4: - case TX4938_CCFG_DIVMODE_16: - txx9_gbus_clock = cpuclk / 4; break; - case TX4938_CCFG_DIVMODE_4_5: - case TX4938_CCFG_DIVMODE_18: - txx9_gbus_clock = cpuclk * 2 / 9; break; - } - switch (divmode) { - case TX4938_CCFG_DIVMODE_8: - case TX4938_CCFG_DIVMODE_10: - case TX4938_CCFG_DIVMODE_12: - case TX4938_CCFG_DIVMODE_16: - case TX4938_CCFG_DIVMODE_18: - txx9_master_clock = txx9_gbus_clock / 4; break; - default: - txx9_master_clock = txx9_gbus_clock; - } - } - /* change default value to udelay/mdelay take reasonable time */ - loops_per_jiffy = txx9_cpu_clock / HZ / 2; - - /* CCFG */ - /* clear WatchDogReset,BusErrorOnWrite flag (W1C) */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WDRST | TX4938_CCFG_BEOW; - /* do reset on watchdog */ - tx4938_ccfgptr->ccfg |= TX4938_CCFG_WR; - /* clear PCIC1 reset */ - if (tx4938_ccfgptr->clkctr & TX4938_CLKCTR_PCIC1RST) - tx4938_ccfgptr->clkctr &= ~TX4938_CLKCTR_PCIC1RST; - - /* enable Timeout BusError */ - if (tx4938_ccfg_toeon) - tx4938_ccfgptr->ccfg |= TX4938_CCFG_TOE; - - /* DMA selection */ - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_DMASEL_ALL; - - /* Use external clock for external arbiter */ - if (!(tx4938_ccfgptr->ccfg & TX4938_CCFG_PCIXARB)) - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_PCICLKEN_ALL; - - printk("%s -- %dMHz(M%dMHz) CRIR:%08lx CCFG:%Lx PCFG:%Lx\n", - pcode_str, - cpuclk / 1000000, txx9_master_clock / 1000000, - (unsigned long)tx4938_ccfgptr->crir, - tx4938_ccfgptr->ccfg, - tx4938_ccfgptr->pcfg); - - printk("%s SDRAMC --", pcode_str); - for (i = 0; i < 4; i++) { - unsigned long long cr = tx4938_sdramcptr->cr[i]; - unsigned long ram_base, ram_size; - if (!((unsigned long)cr & 0x00000400)) - continue; /* disabled */ - ram_base = (unsigned long)(cr >> 49) << 21; - ram_size = ((unsigned long)(cr >> 33) + 1) << 21; - if (ram_base >= 0x20000000) - continue; /* high memory (ignore) */ - printk(" CR%d:%016Lx", i, cr); - txboard_add_phys_region(ram_base, ram_size); - } - printk(" TR:%09Lx\n", tx4938_sdramcptr->tr); - - /* SRAM */ - if (pcode == 0x4938 && tx4938_sramcptr->cr & 1) { - unsigned int size = 0x800; - unsigned long base = - (tx4938_sramcptr->cr >> (39-11)) & ~(size - 1); - txboard_add_phys_region(base, size); - } - - /* TMR */ - for (i = 0; i < TX4938_NR_TMR; i++) - txx9_tmr_init(TX4938_TMR_REG(i) & 0xfffffffffULL); - - /* enable DMA */ - for (i = 0; i < 2; i++) - ____raw_writeq(TX4938_DMA_MCR_MSTEN, - (void __iomem *)(TX4938_DMA_REG(i) + 0x50)); - - /* PIO */ - __raw_writel(0, &tx4938_pioptr->maskcpu); - __raw_writel(0, &tx4938_pioptr->maskext); - - /* TX4938 internal registers */ - if (request_resource(&iomem_resource, &tx4938_reg_resource)) - printk("request resource for internal registers failed\n"); -} - -#ifdef CONFIG_PCI -static inline void tx4938_report_pcic_status1(struct tx4938_pcic_reg *pcicptr) -{ - unsigned short pcistatus = (unsigned short)(pcicptr->pcistatus >> 16); - unsigned long g2pstatus = pcicptr->g2pstatus; - unsigned long pcicstatus = pcicptr->pcicstatus; - static struct { - unsigned long flag; - const char *str; - } pcistat_tbl[] = { - { PCI_STATUS_DETECTED_PARITY, "DetectedParityError" }, - { PCI_STATUS_SIG_SYSTEM_ERROR, "SignaledSystemError" }, - { PCI_STATUS_REC_MASTER_ABORT, "ReceivedMasterAbort" }, - { PCI_STATUS_REC_TARGET_ABORT, "ReceivedTargetAbort" }, - { PCI_STATUS_SIG_TARGET_ABORT, "SignaledTargetAbort" }, - { PCI_STATUS_PARITY, "MasterParityError" }, - }, g2pstat_tbl[] = { - { TX4938_PCIC_G2PSTATUS_TTOE, "TIOE" }, - { TX4938_PCIC_G2PSTATUS_RTOE, "RTOE" }, - }, pcicstat_tbl[] = { - { TX4938_PCIC_PCICSTATUS_PME, "PME" }, - { TX4938_PCIC_PCICSTATUS_TLB, "TLB" }, - { TX4938_PCIC_PCICSTATUS_NIB, "NIB" }, - { TX4938_PCIC_PCICSTATUS_ZIB, "ZIB" }, - { TX4938_PCIC_PCICSTATUS_PERR, "PERR" }, - { TX4938_PCIC_PCICSTATUS_SERR, "SERR" }, - { TX4938_PCIC_PCICSTATUS_GBE, "GBE" }, - { TX4938_PCIC_PCICSTATUS_IWB, "IWB" }, - }; - int i; - - printk("pcistat:%04x(", pcistatus); - for (i = 0; i < ARRAY_SIZE(pcistat_tbl); i++) - if (pcistatus & pcistat_tbl[i].flag) - printk("%s ", pcistat_tbl[i].str); - printk("), g2pstatus:%08lx(", g2pstatus); - for (i = 0; i < ARRAY_SIZE(g2pstat_tbl); i++) - if (g2pstatus & g2pstat_tbl[i].flag) - printk("%s ", g2pstat_tbl[i].str); - printk("), pcicstatus:%08lx(", pcicstatus); - for (i = 0; i < ARRAY_SIZE(pcicstat_tbl); i++) - if (pcicstatus & pcicstat_tbl[i].flag) - printk("%s ", pcicstat_tbl[i].str); - printk(")\n"); -} - -void tx4938_report_pcic_status(void) -{ - int i; - struct tx4938_pcic_reg *pcicptr; - for (i = 0; (pcicptr = get_tx4938_pcicptr(i)) != NULL; i++) - tx4938_report_pcic_status1(pcicptr); -} - -#endif /* CONFIG_PCI */ - -void __init plat_time_init(void) -{ - mips_hpt_frequency = txx9_cpu_clock / 2; - if (tx4938_ccfgptr->ccfg & TX4938_CCFG_TINTDIS) - txx9_clockevent_init(TX4938_TMR_REG(0) & 0xfffffffffULL, - TXX9_IRQ_BASE + TX4938_IR_TMR(0), - txx9_gbus_clock / 2); -} - -void __init plat_mem_setup(void) -{ - unsigned long long pcfg; - char *argptr; - - iomem_resource.end = 0xffffffff; /* 4GB */ - - if (txx9_master_clock == 0) - txx9_master_clock = 25000000; /* 25MHz */ - tx4938_board_setup(); -#ifndef CONFIG_PCI - set_io_port_base(RBTX4938_ETHER_BASE); -#endif - -#ifdef CONFIG_SERIAL_TXX9 - { - extern int early_serial_txx9_setup(struct uart_port *port); - int i; - struct uart_port req; - for(i = 0; i < 2; i++) { - memset(&req, 0, sizeof(req)); - req.line = i; - req.iotype = UPIO_MEM; - req.membase = (char *)(0xff1ff300 + i * 0x100); - req.mapbase = 0xff1ff300 + i * 0x100; - req.irq = RBTX4938_IRQ_IRC_SIO(i); - req.flags |= UPF_BUGGY_UART /*HAVE_CTS_LINE*/; - req.uartclk = 50000000; - early_serial_txx9_setup(&req); - } - } -#ifdef CONFIG_SERIAL_TXX9_CONSOLE - argptr = prom_getcmdline(); - if (strstr(argptr, "console=") == NULL) { - strcat(argptr, " console=ttyS0,38400"); - } -#endif -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_PIO58_61 - printk("PIOSEL: disabling both ata and nand selection\n"); - local_irq_disable(); - tx4938_ccfgptr->pcfg &= ~(TX4938_PCFG_NDF_SEL | TX4938_PCFG_ATA_SEL); -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_NAND - printk("PIOSEL: enabling nand selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_NDF_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_ATA_SEL; -#endif - -#ifdef CONFIG_TOSHIBA_RBTX4938_MPLEX_ATA - printk("PIOSEL: enabling ata selection\n"); - tx4938_ccfgptr->pcfg |= TX4938_PCFG_ATA_SEL; - tx4938_ccfgptr->pcfg &= ~TX4938_PCFG_NDF_SEL; -#endif - -#ifdef CONFIG_IP_PNP - argptr = prom_getcmdline(); - if (strstr(argptr, "ip=") == NULL) { - strcat(argptr, " ip=any"); - } -#endif - - -#ifdef CONFIG_FB - { - conswitchp = &dummy_con; - } -#endif - - rbtx4938_spi_setup(); - pcfg = tx4938_ccfgptr->pcfg; /* updated */ - /* fixup piosel */ - if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_ATA_SEL) - writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x04, - rbtx4938_piosel_addr); - else if ((pcfg & (TX4938_PCFG_ATA_SEL | TX4938_PCFG_NDF_SEL)) == - TX4938_PCFG_NDF_SEL) - writeb((readb(rbtx4938_piosel_addr) & 0x03) | 0x08, - rbtx4938_piosel_addr); - else - writeb(readb(rbtx4938_piosel_addr) & ~(0x08 | 0x04), - rbtx4938_piosel_addr); - - rbtx4938_fpga_resource.name = "FPGA Registers"; - rbtx4938_fpga_resource.start = CPHYSADDR(RBTX4938_FPGA_REG_ADDR); - rbtx4938_fpga_resource.end = CPHYSADDR(RBTX4938_FPGA_REG_ADDR) + 0xffff; - rbtx4938_fpga_resource.flags = IORESOURCE_MEM | IORESOURCE_BUSY; - if (request_resource(&iomem_resource, &rbtx4938_fpga_resource)) - printk("request resource for fpga failed\n"); - - _machine_restart = rbtx4938_machine_restart; - _machine_halt = rbtx4938_machine_halt; - pm_power_off = rbtx4938_machine_power_off; - - writeb(0xff, rbtx4938_led_addr); - printk(KERN_INFO "RBTX4938 --- FPGA(Rev %02x) DIPSW:%02x,%02x\n", - readb(rbtx4938_fpga_rev_addr), - readb(rbtx4938_dipsw_addr), readb(rbtx4938_bdipsw_addr)); -} - -static int __init rbtx4938_ne_init(void) -{ - struct resource res[] = { - { - .start = RBTX4938_RTL_8019_BASE, - .end = RBTX4938_RTL_8019_BASE + 0x20 - 1, - .flags = IORESOURCE_IO, - }, { - .start = RBTX4938_RTL_8019_IRQ, - .flags = IORESOURCE_IRQ, - } - }; - struct platform_device *dev = - platform_device_register_simple("ne", -1, - res, ARRAY_SIZE(res)); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} -device_initcall(rbtx4938_ne_init); - -/* GPIO support */ - -int gpio_to_irq(unsigned gpio) -{ - return -EINVAL; -} - -int irq_to_gpio(unsigned irq) -{ - return -EINVAL; -} - -static DEFINE_SPINLOCK(rbtx4938_spi_gpio_lock); - -static void rbtx4938_spi_gpio_set(struct gpio_chip *chip, unsigned int offset, - int value) -{ - u8 val; - unsigned long flags; - spin_lock_irqsave(&rbtx4938_spi_gpio_lock, flags); - val = readb(rbtx4938_spics_addr); - if (value) - val |= 1 << offset; - else - val &= ~(1 << offset); - writeb(val, rbtx4938_spics_addr); - mmiowb(); - spin_unlock_irqrestore(&rbtx4938_spi_gpio_lock, flags); -} - -static int rbtx4938_spi_gpio_dir_out(struct gpio_chip *chip, - unsigned int offset, int value) -{ - rbtx4938_spi_gpio_set(chip, offset, value); - return 0; -} - -static struct gpio_chip rbtx4938_spi_gpio_chip = { - .set = rbtx4938_spi_gpio_set, - .direction_output = rbtx4938_spi_gpio_dir_out, - .label = "RBTX4938-SPICS", - .base = 16, - .ngpio = 3, -}; - -/* SPI support */ - -static void __init txx9_spi_init(unsigned long base, int irq) -{ - struct resource res[] = { - { - .start = base, - .end = base + 0x20 - 1, - .flags = IORESOURCE_MEM, - }, { - .start = irq, - .flags = IORESOURCE_IRQ, - }, - }; - platform_device_register_simple("spi_txx9", 0, - res, ARRAY_SIZE(res)); -} - -static int __init rbtx4938_spi_init(void) -{ - struct spi_board_info srtc_info = { - .modalias = "rtc-rs5c348", - .max_speed_hz = 1000000, /* 1.0Mbps @ Vdd 2.0V */ - .bus_num = 0, - .chip_select = 16 + SRTC_CS, - /* Mode 1 (High-Active, Shift-Then-Sample), High Avtive CS */ - .mode = SPI_MODE_1 | SPI_CS_HIGH, - }; - spi_register_board_info(&srtc_info, 1); - spi_eeprom_register(SEEPROM1_CS); - spi_eeprom_register(16 + SEEPROM2_CS); - spi_eeprom_register(16 + SEEPROM3_CS); - gpio_request(16 + SRTC_CS, "rtc-rs5c348"); - gpio_direction_output(16 + SRTC_CS, 0); - gpio_request(SEEPROM1_CS, "seeprom1"); - gpio_direction_output(SEEPROM1_CS, 1); - gpio_request(16 + SEEPROM2_CS, "seeprom2"); - gpio_direction_output(16 + SEEPROM2_CS, 1); - gpio_request(16 + SEEPROM3_CS, "seeprom3"); - gpio_direction_output(16 + SEEPROM3_CS, 1); - txx9_spi_init(TX4938_SPI_REG & 0xfffffffffULL, RBTX4938_IRQ_IRC_SPI); - return 0; -} - -static int __init rbtx4938_arch_init(void) -{ - txx9_gpio_init(TX4938_PIO_REG & 0xfffffffffULL, 0, 16); - gpiochip_add(&rbtx4938_spi_gpio_chip); - return rbtx4938_spi_init(); -} -arch_initcall(rbtx4938_arch_init); - -/* Watchdog support */ - -static int __init txx9_wdt_init(unsigned long base) -{ - struct resource res = { - .start = base, - .end = base + 0x100 - 1, - .flags = IORESOURCE_MEM, - }; - struct platform_device *dev = - platform_device_register_simple("txx9wdt", -1, &res, 1); - return IS_ERR(dev) ? PTR_ERR(dev) : 0; -} - -static int __init rbtx4938_wdt_init(void) -{ - return txx9_wdt_init(TX4938_TMR_REG(2) & 0xfffffffffULL); -} -device_initcall(rbtx4938_wdt_init); - -/* Minimum CLK support */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "spi-baseclk")) - return (struct clk *)(txx9_gbus_clock / 2 / 4); - if (!strcmp(id, "imbus_clk")) - return (struct clk *)(txx9_gbus_clock / 2); - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -int clk_enable(struct clk *clk) -{ - return 0; -} -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return (unsigned long)clk; -} -EXPORT_SYMBOL(clk_get_rate); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); diff --git a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c b/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c deleted file mode 100644 index 4d6b4ad..0000000 --- a/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * linux/arch/mips/tx4938/toshiba_rbtx4938/spi_eeprom.c - * Copyright (C) 2000-2001 Toshiba Corporation - * - * 2003-2005 (c) MontaVista Software, Inc. This file is licensed under the - * terms of the GNU General Public License version 2. This program is - * licensed "as is" without any warranty of any kind, whether express - * or implied. - * - * Support for TX4938 in 2.6 - Manish Lachwani (mlachwani@mvista.com) - */ -#include <linux/init.h> -#include <linux/device.h> -#include <linux/spi/spi.h> -#include <linux/spi/eeprom.h> -#include <asm/tx4938/spi.h> - -#define AT250X0_PAGE_SIZE 8 - -/* register board information for at25 driver */ -int __init spi_eeprom_register(int chipid) -{ - static struct spi_eeprom eeprom = { - .name = "at250x0", - .byte_len = 128, - .page_size = AT250X0_PAGE_SIZE, - .flags = EE_ADDR1, - }; - struct spi_board_info info = { - .modalias = "at25", - .max_speed_hz = 1500000, /* 1.5Mbps */ - .bus_num = 0, - .chip_select = chipid, - .platform_data = &eeprom, - /* Mode 0: High-Active, Sample-Then-Shift */ - }; - - return spi_register_board_info(&info, 1); -} - -/* simple temporary spi driver to provide early access to seeprom. */ - -static struct read_param { - int chipid; - int address; - unsigned char *buf; - int len; -} *read_param; - -static int __init early_seeprom_probe(struct spi_device *spi) -{ - int stat = 0; - u8 cmd[2]; - int len = read_param->len; - char *buf = read_param->buf; - int address = read_param->address; - - dev_info(&spi->dev, "spiclk %u KHz.\n", - (spi->max_speed_hz + 500) / 1000); - if (read_param->chipid != spi->chip_select) - return -ENODEV; - while (len > 0) { - /* spi_write_then_read can only work with small chunk */ - int c = len < AT250X0_PAGE_SIZE ? len : AT250X0_PAGE_SIZE; - cmd[0] = 0x03; /* AT25_READ */ - cmd[1] = address; - stat = spi_write_then_read(spi, cmd, sizeof(cmd), buf, c); - buf += c; - len -= c; - address += c; - } - return stat; -} - -static struct spi_driver early_seeprom_driver __initdata = { - .driver = { - .name = "at25", - .owner = THIS_MODULE, - }, - .probe = early_seeprom_probe, -}; - -int __init spi_eeprom_read(int chipid, int address, - unsigned char *buf, int len) -{ - int ret; - struct read_param param = { - .chipid = chipid, - .address = address, - .buf = buf, - .len = len - }; - - read_param = ¶m; - ret = spi_register_driver(&early_seeprom_driver); - if (!ret) - spi_unregister_driver(&early_seeprom_driver); - return ret; -} |