diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2005-07-14 15:57:16 (GMT) |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2005-10-29 18:31:53 (GMT) |
commit | e01402b115cccb6357f956649487aca2c6f7fbba (patch) | |
tree | 256e14f8d2762de98b992219b1a47e8f56b4b0da /arch/mips | |
parent | 86071b637db7baf599df26fdf820dce2fc55ca9f (diff) | |
download | linux-fsl-qoriq-e01402b115cccb6357f956649487aca2c6f7fbba.tar.xz |
More AP / SP bits for the 34K, the Malta bits and things. Still wants
a little polishing.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Diffstat (limited to 'arch/mips')
-rw-r--r-- | arch/mips/Kconfig | 72 | ||||
-rw-r--r-- | arch/mips/kernel/Makefile | 4 | ||||
-rw-r--r-- | arch/mips/kernel/genex.S | 32 | ||||
-rw-r--r-- | arch/mips/kernel/irq-msc01.c | 8 | ||||
-rw-r--r-- | arch/mips/kernel/rtlx.c | 341 | ||||
-rw-r--r-- | arch/mips/kernel/traps.c | 227 | ||||
-rw-r--r-- | arch/mips/kernel/vpe.c | 1295 | ||||
-rw-r--r-- | arch/mips/mips-boards/generic/init.c | 29 | ||||
-rw-r--r-- | arch/mips/mips-boards/generic/memory.c | 29 | ||||
-rw-r--r-- | arch/mips/mips-boards/generic/mipsIRQ.S | 110 | ||||
-rw-r--r-- | arch/mips/mips-boards/generic/time.c | 49 | ||||
-rw-r--r-- | arch/mips/mips-boards/malta/malta_int.c | 136 | ||||
-rw-r--r-- | arch/mips/mm/c-r4k.c | 3 | ||||
-rw-r--r-- | arch/mips/mm/c-sb1.c | 5 |
14 files changed, 2208 insertions, 132 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 749fa87..4ef015f 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -13,6 +13,22 @@ mainmenu "Linux/MIPS Kernel Configuration" source "init/Kconfig" +config CPU_MIPS32 + bool + default y if CPU_MIPS32_R1 || CPU_MIPS32_R2 + +config CPU_MIPS64 + bool + default y if CPU_MIPS64_R1 || CPU_MIPS64_R2 + +config CPU_MIPSR1 + bool + default y if CPU_MIPS32_R1 || CPU_MIPS64_R1 + +config CPU_MIPSR2 + bool + default y if CPU_MIPS32_R2 || CPU_MIPS64_R2 + config SYS_SUPPORTS_32BIT_KERNEL bool config SYS_SUPPORTS_64BIT_KERNEL @@ -233,6 +249,7 @@ config MIPS_EV64120 bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)" depends on EXPERIMENTAL select DMA_NONCOHERENT + select IRQ_CPU select HW_HAS_PCI select MIPS_GT64120 select SYS_SUPPORTS_32BIT_KERNEL @@ -344,6 +361,7 @@ config MIPS_MALTA select BOOT_ELF32 select HAVE_STD_PC_SERIAL_PORT select DMA_NONCOHERENT + select IRQ_CPU select GENERIC_ISA_DMA select HW_HAS_PCI select I8259 @@ -1277,6 +1295,31 @@ config CPU_HAS_PREFETCH bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2 default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 +config MIPS_MT + bool "Enable MIPS MT" + +config MIPS_VPE_LOADER + bool "VPE loader support." + depends on MIPS_MT + help + Includes a loader for loading an elf relocatable object + onto another VPE and running it. + +config MIPS_VPE_LOADER_TOM + bool "Load VPE program into memory hidden from linux" + depends on MIPS_VPE_LOADER + default y + help + The loader can use memory that is present but has been hidden from + Linux using the kernel command line option "mem=xxMB". It's up to + you to ensure the amount you put in the option and the space your + program requires is less or equal to the amount physically present. + +# this should possibly be in drivers/char, but it is rather cpu related. Hmmm +config MIPS_VPE_APSP_API + bool "Enable support for AP/SP API (RTLX)" + depends on MIPS_VPE_LOADER + config VTAG_ICACHE bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32 default y if CPU_SB1 @@ -1335,6 +1378,35 @@ config CPU_HAS_WB machines which require flushing of write buffers in software. Saying Y is the safe option; N may result in kernel malfunction and crashes. +menu "MIPSR2 Interrupt handling" + depends on CPU_MIPSR2 && CPU_ADVANCED + +config CPU_MIPSR2_IRQ_VI + bool "Vectored interrupt mode" + help + Vectored interrupt mode allowing faster dispatching of interrupts. + The board support code needs to be written to take advantage of this + mode. Compatibility code is included to allow the kernel to run on + a CPU that does not support vectored interrupts. It's safe to + say Y here. + +config CPU_MIPSR2_IRQ_EI + bool "External interrupt controller mode" + help + Extended interrupt mode takes advantage of an external interrupt + controller to allow fast dispatching from many possible interrupt + sources. Say N unless you know that external interrupt support is + required. + +config CPU_MIPSR2_SRS + bool "Make shadow set registers available for interrupt handlers" + depends on CPU_MIPSR2_IRQ_VI || CPU_MIPSR2_IRQ_EI + help + Allow the kernel to use shadow register sets for fast interrupts. + Interrupt handlers must be specially written to use shadow sets. + Say N unless you know that shadow register set upport is needed. +endmenu + config CPU_HAS_SYNC bool depends on !CPU_R3000 diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 0867417..0f52706 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -34,12 +34,16 @@ obj-$(CONFIG_CPU_R6000) += r6000_fpu.o r4k_switch.o obj-$(CONFIG_SMP) += smp.o +obj-$(CONFIG_MIPS_VPE_LOADER) += vpe.o +obj-$(CONFIG_MIPS_VPE_APSP_API) += rtlx.o + obj-$(CONFIG_NO_ISA) += dma-no-isa.o obj-$(CONFIG_I8259) += i8259.o obj-$(CONFIG_IRQ_CPU) += irq_cpu.o obj-$(CONFIG_IRQ_CPU_RM7K) += irq-rm7000.o obj-$(CONFIG_IRQ_CPU_RM9K) += irq-rm9000.o obj-$(CONFIG_IRQ_MV64340) += irq-mv6434x.o +obj-$(CONFIG_MIPS_BOARDS_GEN) += irq-msc01.o obj-$(CONFIG_32BIT) += scall32-o32.o obj-$(CONFIG_64BIT) += scall64-64.o diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index 349ec30..fd904d1 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -148,6 +148,38 @@ NESTED(except_vec_ejtag_debug, 0, sp) __FINIT /* + * Vectored interrupt handler. + * This prototype is copied to ebase + n*IntCtl.VS and patched + * to invoke the handler + */ +NESTED(except_vec_vi, 0, sp) + SAVE_SOME + SAVE_AT + .set push + .set noreorder +EXPORT(except_vec_vi_lui) + lui v0, 0 /* Patched */ + j except_vec_vi_handler +EXPORT(except_vec_vi_ori) + ori v0, 0 /* Patched */ + .set pop + END(except_vec_vi) +EXPORT(except_vec_vi_end) + +/* + * Common Vectored Interrupt code + * Complete the register saves and invoke the handler which is passed in $v0 + */ +NESTED(except_vec_vi_handler, 0, sp) + SAVE_TEMP + SAVE_STATIC + CLI + move a0, sp + jalr v0 + j ret_from_irq + END(except_vec_vi_handler) + +/* * EJTAG debug exception handler. */ NESTED(ejtag_debug_handler, PT_SIZE, sp) diff --git a/arch/mips/kernel/irq-msc01.c b/arch/mips/kernel/irq-msc01.c index bf759e3..3f653c7 100644 --- a/arch/mips/kernel/irq-msc01.c +++ b/arch/mips/kernel/irq-msc01.c @@ -74,7 +74,7 @@ static void disable_msc_irq(unsigned int irq) static void level_mask_and_ack_msc_irq(unsigned int irq) { mask_msc_irq(irq); - if (!cpu_has_ei) + if (!cpu_has_veic) MSCIC_WRITE(MSC01_IC_EOI, 0); } @@ -84,7 +84,7 @@ static void level_mask_and_ack_msc_irq(unsigned int irq) static void edge_mask_and_ack_msc_irq(unsigned int irq) { mask_msc_irq(irq); - if (!cpu_has_ei) + if (!cpu_has_veic) MSCIC_WRITE(MSC01_IC_EOI, 0); else { u32 r; @@ -166,14 +166,14 @@ void __init init_msc_irqs(unsigned int base, msc_irqmap_t *imp, int nirq) switch (imp->im_type) { case MSC01_IRQ_EDGE: irq_desc[base+n].handler = &msc_edgeirq_type; - if (cpu_has_ei) + if (cpu_has_veic) MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT); else MSCIC_WRITE(MSC01_IC_SUP+n*8, MSC01_IC_SUP_EDGE_BIT | imp->im_lvl); break; case MSC01_IRQ_LEVEL: irq_desc[base+n].handler = &msc_levelirq_type; - if (cpu_has_ei) + if (cpu_has_veic) MSCIC_WRITE(MSC01_IC_SUP+n*8, 0); else MSCIC_WRITE(MSC01_IC_SUP+n*8, imp->im_lvl); diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c new file mode 100644 index 0000000..8c81f3c --- /dev/null +++ b/arch/mips/kernel/rtlx.c @@ -0,0 +1,341 @@ +/* + * Copyright (C) 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/vmalloc.h> +#include <linux/elf.h> +#include <linux/seq_file.h> +#include <linux/syscalls.h> +#include <linux/moduleloader.h> +#include <linux/interrupt.h> +#include <linux/poll.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <asm/mipsmtregs.h> +#include <asm/cacheflush.h> +#include <asm/atomic.h> +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/system.h> +#include <asm/rtlx.h> + +#define RTLX_MAJOR 64 +#define RTLX_TARG_VPE 1 + +struct rtlx_info *rtlx; +static int major; +static char module_name[] = "rtlx"; +static inline int spacefree(int read, int write, int size); + +static struct chan_waitqueues { + wait_queue_head_t rt_queue; + wait_queue_head_t lx_queue; +} channel_wqs[RTLX_CHANNELS]; + +static struct irqaction irq; +static int irq_num; + +extern void *vpe_get_shared(int index); + +static void rtlx_dispatch(struct pt_regs *regs) +{ + do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ, regs); +} + +irqreturn_t rtlx_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + irqreturn_t r = IRQ_HANDLED; + int i; + + for (i = 0; i < RTLX_CHANNELS; i++) { + struct rtlx_channel *chan = &rtlx->channel[i]; + + if (chan->lx_read != chan->lx_write) + wake_up_interruptible(&channel_wqs[i].lx_queue); + } + + return r; +} + +void dump_rtlx(void) +{ + int i; + + printk("id 0x%lx state %d\n", rtlx->id, rtlx->state); + + for (i = 0; i < RTLX_CHANNELS; i++) { + struct rtlx_channel *chan = &rtlx->channel[i]; + + printk(" rt_state %d lx_state %d buffer_size %d\n", + chan->rt_state, chan->lx_state, chan->buffer_size); + + printk(" rt_read %d rt_write %d\n", + chan->rt_read, chan->rt_write); + + printk(" lx_read %d lx_write %d\n", + chan->lx_read, chan->lx_write); + + printk(" rt_buffer <%s>\n", chan->rt_buffer); + printk(" lx_buffer <%s>\n", chan->lx_buffer); + } +} + +/* call when we have the address of the shared structure from the SP side. */ +static int rtlx_init(struct rtlx_info *rtlxi) +{ + int i; + + if (rtlxi->id != RTLX_ID) { + printk(KERN_WARNING "no valid RTLX id at 0x%p\n", rtlxi); + return (-ENOEXEC); + } + + /* initialise the wait queues */ + for (i = 0; i < RTLX_CHANNELS; i++) { + init_waitqueue_head(&channel_wqs[i].rt_queue); + init_waitqueue_head(&channel_wqs[i].lx_queue); + } + + /* set up for interrupt handling */ + memset(&irq, 0, sizeof(struct irqaction)); + + if (cpu_has_vint) { + set_vi_handler(MIPS_CPU_RTLX_IRQ, rtlx_dispatch); + } + + irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ; + irq.handler = rtlx_interrupt; + irq.flags = SA_INTERRUPT; + irq.name = "RTLX"; + irq.dev_id = rtlx; + setup_irq(irq_num, &irq); + + rtlx = rtlxi; + return (0); +} + +/* only allow one open process at a time to open each channel */ +static int rtlx_open(struct inode *inode, struct file *filp) +{ + int minor, ret; + struct rtlx_channel *chan; + + /* assume only 1 device at the mo. */ + minor = MINOR(inode->i_rdev); + + if (rtlx == NULL) { + struct rtlx_info **p; + if( (p = vpe_get_shared(RTLX_TARG_VPE)) == NULL) { + printk(" vpe_get_shared is NULL. Has an SP program been loaded?\n"); + return (-EFAULT); + } + + if (*p == NULL) { + printk(" vpe_shared %p %p\n", p, *p); + return (-EFAULT); + } + + if ((ret = rtlx_init(*p)) < 0) + return (ret); + } + + chan = &rtlx->channel[minor]; + + /* already open? */ + if (chan->lx_state == RTLX_STATE_OPENED) + return (-EBUSY); + + chan->lx_state = RTLX_STATE_OPENED; + return (0); +} + +static int rtlx_release(struct inode *inode, struct file *filp) +{ + int minor; + + minor = MINOR(inode->i_rdev); + rtlx->channel[minor].lx_state = RTLX_STATE_UNUSED; + return (0); +} + +static unsigned int rtlx_poll(struct file *file, poll_table * wait) +{ + int minor; + unsigned int mask = 0; + struct rtlx_channel *chan; + + minor = MINOR(file->f_dentry->d_inode->i_rdev); + chan = &rtlx->channel[minor]; + + poll_wait(file, &channel_wqs[minor].rt_queue, wait); + poll_wait(file, &channel_wqs[minor].lx_queue, wait); + + /* data available to read? */ + if (chan->lx_read != chan->lx_write) + mask |= POLLIN | POLLRDNORM; + + /* space to write */ + if (spacefree(chan->rt_read, chan->rt_write, chan->buffer_size)) + mask |= POLLOUT | POLLWRNORM; + + return (mask); +} + +static ssize_t rtlx_read(struct file *file, char __user * buffer, size_t count, + loff_t * ppos) +{ + size_t fl = 0L; + int minor; + struct rtlx_channel *lx; + DECLARE_WAITQUEUE(wait, current); + + minor = MINOR(file->f_dentry->d_inode->i_rdev); + lx = &rtlx->channel[minor]; + + /* data available? */ + if (lx->lx_write == lx->lx_read) { + if (file->f_flags & O_NONBLOCK) + return (0); // -EAGAIN makes cat whinge + + /* go to sleep */ + add_wait_queue(&channel_wqs[minor].lx_queue, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + while (lx->lx_write == lx->lx_read) + schedule(); + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[minor].lx_queue, &wait); + + /* back running */ + } + + /* find out how much in total */ + count = min( count, + (size_t)(lx->lx_write + lx->buffer_size - lx->lx_read) % lx->buffer_size); + + /* then how much from the read pointer onwards */ + fl = min( count, (size_t)lx->buffer_size - lx->lx_read); + + copy_to_user (buffer, &lx->lx_buffer[lx->lx_read], fl); + + /* and if there is anything left at the beginning of the buffer */ + if ( count - fl ) + copy_to_user (buffer + fl, lx->lx_buffer, count - fl); + + /* update the index */ + lx->lx_read += count; + lx->lx_read %= lx->buffer_size; + + return (count); +} + +static inline int spacefree(int read, int write, int size) +{ + if (read == write) { + /* never fill the buffer completely, so indexes are always equal if empty + and only empty, or !equal if data available */ + return (size - 1); + } + + return ((read + size - write) % size) - 1; +} + +static ssize_t rtlx_write(struct file *file, const char __user * buffer, + size_t count, loff_t * ppos) +{ + int minor; + struct rtlx_channel *rt; + size_t fl; + DECLARE_WAITQUEUE(wait, current); + + minor = MINOR(file->f_dentry->d_inode->i_rdev); + rt = &rtlx->channel[minor]; + + /* any space left... */ + if (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) { + + if (file->f_flags & O_NONBLOCK) + return (-EAGAIN); + + add_wait_queue(&channel_wqs[minor].rt_queue, &wait); + set_current_state(TASK_INTERRUPTIBLE); + + while (!spacefree(rt->rt_read, rt->rt_write, rt->buffer_size)) + schedule(); + + set_current_state(TASK_RUNNING); + remove_wait_queue(&channel_wqs[minor].rt_queue, &wait); + } + + /* total number of bytes to copy */ + count = min( count, (size_t)spacefree(rt->rt_read, rt->rt_write, rt->buffer_size) ); + + /* first bit from write pointer to the end of the buffer, or count */ + fl = min(count, (size_t) rt->buffer_size - rt->rt_write); + + copy_from_user(&rt->rt_buffer[rt->rt_write], buffer, fl); + + /* if there's any left copy to the beginning of the buffer */ + if( count - fl ) + copy_from_user(rt->rt_buffer, buffer + fl, count - fl); + + rt->rt_write += count; + rt->rt_write %= rt->buffer_size; + + return(count); +} + +static struct file_operations rtlx_fops = { + .owner = THIS_MODULE, + .open = rtlx_open, + .release = rtlx_release, + .write = rtlx_write, + .read = rtlx_read, + .poll = rtlx_poll +}; + +static int rtlx_module_init(void) +{ + if ((major = register_chrdev(RTLX_MAJOR, module_name, &rtlx_fops)) < 0) { + printk("rtlx_module_init: unable to register device\n"); + return (-EBUSY); + } + + if (major == 0) + major = RTLX_MAJOR; + + return (0); +} + +static void rtlx_module_exit(void) +{ + unregister_chrdev(major, module_name); +} + +module_init(rtlx_module_init); +module_exit(rtlx_module_exit); +MODULE_DESCRIPTION("MIPS RTLX"); +MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index b2fa607..0a3969a 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -20,6 +20,7 @@ #include <linux/smp_lock.h> #include <linux/spinlock.h> #include <linux/kallsyms.h> +#include <linux/bootmem.h> #include <asm/bootinfo.h> #include <asm/branch.h> @@ -64,6 +65,9 @@ extern int fpu_emulator_cop1Handler(int xcptno, struct pt_regs *xcp, void (*board_be_init)(void); int (*board_be_handler)(struct pt_regs *regs, int is_fixup); +void (*board_nmi_handler_setup)(void); +void (*board_ejtag_handler_setup)(void); +void (*board_bind_eic_interrupt)(int irq, int regset); /* * These constant is for searching for possible module text segments. @@ -813,6 +817,12 @@ asmlinkage void do_reserved(struct pt_regs *regs) (regs->cp0_cause & 0x7f) >> 2); } +asmlinkage void do_default_vi(struct pt_regs *regs) +{ + show_regs(regs); + panic("Caught unexpected vectored interrupt."); +} + /* * Some MIPS CPUs can enable/disable for cache parity detection, but do * it different ways. @@ -921,7 +931,11 @@ void nmi_exception_handler(struct pt_regs *regs) while(1) ; } +#define VECTORSPACING 0x100 /* for EI/VI mode */ + +unsigned long ebase; unsigned long exception_handlers[32]; +unsigned long vi_handlers[64]; /* * As a side effect of the way this is implemented we're limited @@ -935,13 +949,156 @@ void *set_except_vector(int n, void *addr) exception_handlers[n] = handler; if (n == 0 && cpu_has_divec) { - *(volatile u32 *)(CAC_BASE + 0x200) = 0x08000000 | + *(volatile u32 *)(ebase + 0x200) = 0x08000000 | (0x03ffffff & (handler >> 2)); - flush_icache_range(CAC_BASE + 0x200, CAC_BASE + 0x204); + flush_icache_range(ebase + 0x200, ebase + 0x204); + } + return (void *)old_handler; +} + +#ifdef CONFIG_CPU_MIPSR2 +/* + * Shadow register allocation + * FIXME: SMP... + */ + +/* MIPSR2 shadow register sets */ +struct shadow_registers { + spinlock_t sr_lock; /* */ + int sr_supported; /* Number of shadow register sets supported */ + int sr_allocated; /* Bitmap of allocated shadow registers */ +} shadow_registers; + +void mips_srs_init(void) +{ +#ifdef CONFIG_CPU_MIPSR2_SRS + shadow_registers.sr_supported = ((read_c0_srsctl() >> 26) & 0x0f) + 1; + printk ("%d MIPSR2 register sets available\n", shadow_registers.sr_supported); +#else + shadow_registers.sr_supported = 1; +#endif + shadow_registers.sr_allocated = 1; /* Set 0 used by kernel */ + spin_lock_init(&shadow_registers.sr_lock); +} + +int mips_srs_max(void) +{ + return shadow_registers.sr_supported; +} + +int mips_srs_alloc (void) +{ + struct shadow_registers *sr = &shadow_registers; + unsigned long flags; + int set; + + spin_lock_irqsave(&sr->sr_lock, flags); + + for (set = 0; set < sr->sr_supported; set++) { + if ((sr->sr_allocated & (1 << set)) == 0) { + sr->sr_allocated |= 1 << set; + spin_unlock_irqrestore(&sr->sr_lock, flags); + return set; + } + } + + /* None available */ + spin_unlock_irqrestore(&sr->sr_lock, flags); + return -1; +} + +void mips_srs_free (int set) +{ + struct shadow_registers *sr = &shadow_registers; + unsigned long flags; + + spin_lock_irqsave(&sr->sr_lock, flags); + sr->sr_allocated &= ~(1 << set); + spin_unlock_irqrestore(&sr->sr_lock, flags); +} + +void *set_vi_srs_handler (int n, void *addr, int srs) +{ + unsigned long handler; + unsigned long old_handler = vi_handlers[n]; + u32 *w; + unsigned char *b; + + if (!cpu_has_veic && !cpu_has_vint) + BUG(); + + if (addr == NULL) { + handler = (unsigned long) do_default_vi; + srs = 0; + } + else + handler = (unsigned long) addr; + vi_handlers[n] = (unsigned long) addr; + + b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING); + + if (srs >= mips_srs_max()) + panic("Shadow register set %d not supported", srs); + + if (cpu_has_veic) { + if (board_bind_eic_interrupt) + board_bind_eic_interrupt (n, srs); + } + else if (cpu_has_vint) { + /* SRSMap is only defined if shadow sets are implemented */ + if (mips_srs_max() > 1) + change_c0_srsmap (0xf << n*4, srs << n*4); + } + + if (srs == 0) { + /* + * If no shadow set is selected then use the default handler + * that does normal register saving and a standard interrupt exit + */ + + extern char except_vec_vi, except_vec_vi_lui; + extern char except_vec_vi_ori, except_vec_vi_end; + const int handler_len = &except_vec_vi_end - &except_vec_vi; + const int lui_offset = &except_vec_vi_lui - &except_vec_vi; + const int ori_offset = &except_vec_vi_ori - &except_vec_vi; + + if (handler_len > VECTORSPACING) { + /* + * Sigh... panicing won't help as the console + * is probably not configured :( + */ + panic ("VECTORSPACING too small"); + } + + memcpy (b, &except_vec_vi, handler_len); + w = (u32 *)(b + lui_offset); + *w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff); + w = (u32 *)(b + ori_offset); + *w = (*w & 0xffff0000) | ((u32)handler & 0xffff); + flush_icache_range((unsigned long)b, (unsigned long)(b+handler_len)); + } + else { + /* + * In other cases jump directly to the interrupt handler + * + * It is the handlers responsibility to save registers if required + * (eg hi/lo) and return from the exception using "eret" + */ + w = (u32 *)b; + *w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */ + *w = 0; + flush_icache_range((unsigned long)b, (unsigned long)(b+8)); } + return (void *)old_handler; } +void *set_vi_handler (int n, void *addr) +{ + return set_vi_srs_handler (n, addr, 0); +} +#endif + /* * This is used by native signal handling */ @@ -1016,10 +1173,18 @@ void __init per_cpu_trap_init(void) if (cpu_has_dsp) set_c0_status(ST0_MX); +#ifdef CONFIG_CPU_MIPSR2 + write_c0_hwrena (0x0000000f); /* Allow rdhwr to all registers */ +#endif + /* - * Some MIPS CPUs have a dedicated interrupt vector which reduces the - * interrupt processing overhead. Use it where available. + * Interrupt handling. */ + if (cpu_has_veic || cpu_has_vint) { + write_c0_ebase (ebase); + /* Setting vector spacing enables EI/VI mode */ + change_c0_intctl (0x3e0, VECTORSPACING); + } if (cpu_has_divec) set_c0_cause(CAUSEF_IV); @@ -1035,13 +1200,41 @@ void __init per_cpu_trap_init(void) tlb_init(); } +/* Install CPU exception handler */ +void __init set_handler (unsigned long offset, void *addr, unsigned long size) +{ + memcpy((void *)(ebase + offset), addr, size); + flush_icache_range(ebase + offset, ebase + offset + size); +} + +/* Install uncached CPU exception handler */ +void __init set_uncached_handler (unsigned long offset, void *addr, unsigned long size) +{ +#ifdef CONFIG_32BIT + unsigned long uncached_ebase = KSEG1ADDR(ebase); +#endif +#ifdef CONFIG_64BIT + unsigned long uncached_ebase = TO_UNCAC(ebase); +#endif + + memcpy((void *)(uncached_ebase + offset), addr, size); +} + void __init trap_init(void) { extern char except_vec3_generic, except_vec3_r4000; - extern char except_vec_ejtag_debug; extern char except_vec4; unsigned long i; + if (cpu_has_veic || cpu_has_vint) + ebase = (unsigned long) alloc_bootmem_low_pages (0x200 + VECTORSPACING*64); + else + ebase = CAC_BASE; + +#ifdef CONFIG_CPU_MIPSR2 + mips_srs_init(); +#endif + per_cpu_trap_init(); /* @@ -1049,7 +1242,7 @@ void __init trap_init(void) * This will be overriden later as suitable for a particular * configuration. */ - memcpy((void *)(CAC_BASE + 0x180), &except_vec3_generic, 0x80); + set_handler(0x180, &except_vec3_generic, 0x80); /* * Setup default vectors @@ -1061,8 +1254,8 @@ void __init trap_init(void) * Copy the EJTAG debug exception vector handler code to it's final * destination. */ - if (cpu_has_ejtag) - memcpy((void *)(CAC_BASE + 0x300), &except_vec_ejtag_debug, 0x80); + if (cpu_has_ejtag && board_ejtag_handler_setup) + board_ejtag_handler_setup (); /* * Only some CPUs have the watch exceptions. @@ -1071,11 +1264,15 @@ void __init trap_init(void) set_except_vector(23, handle_watch); /* - * Some MIPS CPUs have a dedicated interrupt vector which reduces the - * interrupt processing overhead. Use it where available. + * Initialise interrupt handlers */ - if (cpu_has_divec) - memcpy((void *)(CAC_BASE + 0x200), &except_vec4, 0x8); + if (cpu_has_veic || cpu_has_vint) { + int nvec = cpu_has_veic ? 64 : 8; + for (i = 0; i < nvec; i++) + set_vi_handler (i, NULL); + } + else if (cpu_has_divec) + set_handler(0x200, &except_vec4, 0x8); /* * Some CPUs can enable/disable for cache parity detection, but does @@ -1122,6 +1319,10 @@ void __init trap_init(void) //set_except_vector(15, handle_ndc); } + + if (board_nmi_handler_setup) + board_nmi_handler_setup(); + if (cpu_has_fpu && !cpu_has_nofpuex) set_except_vector(15, handle_fpe); @@ -1146,5 +1347,5 @@ void __init trap_init(void) signal32_init(); #endif - flush_icache_range(CAC_BASE, CAC_BASE + 0x400); + flush_icache_range(ebase, ebase + 0x400); } diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c new file mode 100644 index 0000000..6bf42ba --- /dev/null +++ b/arch/mips/kernel/vpe.c @@ -0,0 +1,1295 @@ +/* + * Copyright (C) 2004, 2005 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + */ + +/* + * VPE support module + * + * Provides support for loading a MIPS SP program on VPE1. + * The SP enviroment is rather simple, no tlb's. It needs to be relocatable + * (or partially linked). You should initialise your stack in the startup + * code. This loader looks for the symbol __start and sets up + * execution to resume from there. The MIPS SDE kit contains suitable examples. + * + * To load and run, simply cat a SP 'program file' to /dev/vpe1. + * i.e cat spapp >/dev/vpe1. + * + * You'll need to have the following device files. + * mknod /dev/vpe0 c 63 0 + * mknod /dev/vpe1 c 63 1 + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/fs.h> +#include <linux/init.h> +#include <asm/uaccess.h> +#include <linux/slab.h> +#include <linux/list.h> +#include <linux/vmalloc.h> +#include <linux/elf.h> +#include <linux/seq_file.h> +#include <linux/syscalls.h> +#include <linux/moduleloader.h> +#include <linux/interrupt.h> +#include <linux/poll.h> +#include <linux/bootmem.h> +#include <asm/mipsregs.h> +#include <asm/cacheflush.h> +#include <asm/atomic.h> +#include <asm/cpu.h> +#include <asm/processor.h> +#include <asm/system.h> + +typedef void *vpe_handle; + +// defined here because the kernel module loader doesn't have +// anything to do with it. +#define SHN_MIPS_SCOMMON 0xff03 + +#ifndef ARCH_SHF_SMALL +#define ARCH_SHF_SMALL 0 +#endif + +/* If this is set, the section belongs in the init part of the module */ +#define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) + +// temp number, +#define VPE_MAJOR 63 + +static char module_name[] = "vpe"; +static int major = 0; + +/* grab the likely amount of memory we will need. */ +#ifdef CONFIG_MIPS_VPE_LOADER_TOM +#define P_SIZE (2 * 1024 * 1024) +#else +/* add an overhead to the max kmalloc size for non-striped symbols/etc */ +#define P_SIZE (256 * 1024) +#endif + +#define MAX_VPES 16 + +enum vpe_state { + VPE_STATE_UNUSED = 0, + VPE_STATE_INUSE, + VPE_STATE_RUNNING +}; + +enum tc_state { + TC_STATE_UNUSED = 0, + TC_STATE_INUSE, + TC_STATE_RUNNING, + TC_STATE_DYNAMIC +}; + +struct vpe; +typedef struct tc { + enum tc_state state; + int index; + + /* parent VPE */ + struct vpe *pvpe; + + /* The list of TC's with this VPE */ + struct list_head tc; + + /* The global list of tc's */ + struct list_head list; +} tc_t; + +typedef struct vpe { + enum vpe_state state; + + /* (device) minor associated with this vpe */ + int minor; + + /* elfloader stuff */ + void *load_addr; + u32 len; + char *pbuffer; + u32 plen; + + unsigned long __start; + + /* tc's associated with this vpe */ + struct list_head tc; + + /* The list of vpe's */ + struct list_head list; + + /* shared symbol address */ + void *shared_ptr; +} vpe_t; + +struct vpecontrol_ { + /* Virtual processing elements */ + struct list_head vpe_list; + + /* Thread contexts */ + struct list_head tc_list; +} vpecontrol; + +static void release_progmem(void *ptr); +static void dump_vpe(vpe_t * v); +extern void save_gp_address(unsigned int secbase, unsigned int rel); + +/* get the vpe associated with this minor */ +struct vpe *get_vpe(int minor) +{ + struct vpe *v; + + list_for_each_entry(v, &vpecontrol.vpe_list, list) { + if (v->minor == minor) + return v; + } + + printk(KERN_DEBUG "VPE: get_vpe minor %d not found\n", minor); + return NULL; +} + +/* get the vpe associated with this minor */ +struct tc *get_tc(int index) +{ + struct tc *t; + + list_for_each_entry(t, &vpecontrol.tc_list, list) { + if (t->index == index) + return t; + } + + printk(KERN_DEBUG "VPE: get_tc index %d not found\n", index); + + return NULL; +} + +struct tc *get_tc_unused(void) +{ + struct tc *t; + + list_for_each_entry(t, &vpecontrol.tc_list, list) { + if (t->state == TC_STATE_UNUSED) + return t; + } + + printk(KERN_DEBUG "VPE: All TC's are in use\n"); + + return NULL; +} + +/* allocate a vpe and associate it with this minor (or index) */ +struct vpe *alloc_vpe(int minor) +{ + struct vpe *v; + + if ((v = kmalloc(sizeof(struct vpe), GFP_KERNEL)) == NULL) { + printk(KERN_WARNING "VPE: alloc_vpe no mem\n"); + return NULL; + } + + memset(v, 0, sizeof(struct vpe)); + + INIT_LIST_HEAD(&v->tc); + list_add_tail(&v->list, &vpecontrol.vpe_list); + + v->minor = minor; + return v; +} + +/* allocate a tc. At startup only tc0 is running, all other can be halted. */ +struct tc *alloc_tc(int index) +{ + struct tc *t; + + if ((t = kmalloc(sizeof(struct tc), GFP_KERNEL)) == NULL) { + printk(KERN_WARNING "VPE: alloc_tc no mem\n"); + return NULL; + } + + memset(t, 0, sizeof(struct tc)); + + INIT_LIST_HEAD(&t->tc); + list_add_tail(&t->list, &vpecontrol.tc_list); + + t->index = index; + + return t; +} + +/* clean up and free everything */ +void release_vpe(struct vpe *v) +{ + list_del(&v->list); + if (v->load_addr) + release_progmem(v); + kfree(v); +} + +void dump_mtregs(void) +{ + unsigned long val; + + val = read_c0_config3(); + printk("config3 0x%lx MT %ld\n", val, + (val & CONFIG3_MT) >> CONFIG3_MT_SHIFT); + + val = read_c0_mvpconf0(); + printk("mvpconf0 0x%lx, PVPE %ld PTC %ld M %ld\n", val, + (val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT, + val & MVPCONF0_PTC, (val & MVPCONF0_M) >> MVPCONF0_M_SHIFT); + + val = read_c0_mvpcontrol(); + printk("MVPControl 0x%lx, STLB %ld VPC %ld EVP %ld\n", val, + (val & MVPCONTROL_STLB) >> MVPCONTROL_STLB_SHIFT, + (val & MVPCONTROL_VPC) >> MVPCONTROL_VPC_SHIFT, + (val & MVPCONTROL_EVP)); + + val = read_c0_vpeconf0(); + printk("VPEConf0 0x%lx MVP %ld\n", val, + (val & VPECONF0_MVP) >> VPECONF0_MVP_SHIFT); +} + +/* Find some VPE program space */ +static void *alloc_progmem(u32 len) +{ +#ifdef CONFIG_MIPS_VPE_LOADER_TOM + /* this means you must tell linux to use less memory than you physically have */ + return (void *)((max_pfn * PAGE_SIZE) + KSEG0); +#else + // simple grab some mem for now + return kmalloc(len, GFP_KERNEL); +#endif +} + +static void release_progmem(void *ptr) +{ +#ifndef CONFIG_MIPS_VPE_LOADER_TOM + kfree(ptr); +#endif +} + +/* Update size with this section: return offset. */ +static long get_offset(unsigned long *size, Elf_Shdr * sechdr) +{ + long ret; + + ret = ALIGN(*size, sechdr->sh_addralign ? : 1); + *size = ret + sechdr->sh_size; + return ret; +} + +/* Lay out the SHF_ALLOC sections in a way not dissimilar to how ld + might -- code, read-only data, read-write data, small data. Tally + sizes, and place the offsets into sh_entsize fields: high bit means it + belongs in init. */ +static void layout_sections(struct module *mod, const Elf_Ehdr * hdr, + Elf_Shdr * sechdrs, const char *secstrings) +{ + static unsigned long const masks[][2] = { + /* NOTE: all executable code must be the first section + * in this array; otherwise modify the text_size + * finder in the two loops below */ + {SHF_EXECINSTR | SHF_ALLOC, ARCH_SHF_SMALL}, + {SHF_ALLOC, SHF_WRITE | ARCH_SHF_SMALL}, + {SHF_WRITE | SHF_ALLOC, ARCH_SHF_SMALL}, + {ARCH_SHF_SMALL | SHF_ALLOC, 0} + }; + unsigned int m, i; + + for (i = 0; i < hdr->e_shnum; i++) + sechdrs[i].sh_entsize = ~0UL; + + for (m = 0; m < ARRAY_SIZE(masks); ++m) { + for (i = 0; i < hdr->e_shnum; ++i) { + Elf_Shdr *s = &sechdrs[i]; + + // || strncmp(secstrings + s->sh_name, ".init", 5) == 0) + if ((s->sh_flags & masks[m][0]) != masks[m][0] + || (s->sh_flags & masks[m][1]) + || s->sh_entsize != ~0UL) + continue; + s->sh_entsize = get_offset(&mod->core_size, s); + } + + if (m == 0) + mod->core_text_size = mod->core_size; + + } +} + + +/* from module-elf32.c, but subverted a little */ + +struct mips_hi16 { + struct mips_hi16 *next; + Elf32_Addr *addr; + Elf32_Addr value; +}; + +static struct mips_hi16 *mips_hi16_list; +static unsigned int gp_offs, gp_addr; + +static int apply_r_mips_none(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + return 0; +} + +static int apply_r_mips_gprel16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + int rel; + + if( !(*location & 0xffff) ) { + rel = (int)v - gp_addr; + } + else { + /* .sbss + gp(relative) + offset */ + /* kludge! */ + rel = (int)(short)((int)v + gp_offs + + (int)(short)(*location & 0xffff) - gp_addr); + } + + if( (rel > 32768) || (rel < -32768) ) { + printk(KERN_ERR + "apply_r_mips_gprel16: relative address out of range 0x%x %d\n", + rel, rel); + return -ENOEXEC; + } + + *location = (*location & 0xffff0000) | (rel & 0xffff); + + return 0; +} + +static int apply_r_mips_pc16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + int rel; + rel = (((unsigned int)v - (unsigned int)location)); + rel >>= 2; // because the offset is in _instructions_ not bytes. + rel -= 1; // and one instruction less due to the branch delay slot. + + if( (rel > 32768) || (rel < -32768) ) { + printk(KERN_ERR + "apply_r_mips_pc16: relative address out of range 0x%x\n", rel); + return -ENOEXEC; + } + + *location = (*location & 0xffff0000) | (rel & 0xffff); + + return 0; +} + +static int apply_r_mips_32(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + *location += v; + + return 0; +} + +static int apply_r_mips_26(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + if (v % 4) { + printk(KERN_ERR "module %s: dangerous relocation mod4\n", me->name); + return -ENOEXEC; + } + +/* Not desperately convinced this is a good check of an overflow condition + anyway. But it gets in the way of handling undefined weak symbols which + we want to set to zero. + if ((v & 0xf0000000) != (((unsigned long)location + 4) & 0xf0000000)) { + printk(KERN_ERR + "module %s: relocation overflow\n", + me->name); + return -ENOEXEC; + } +*/ + + *location = (*location & ~0x03ffffff) | + ((*location + (v >> 2)) & 0x03ffffff); + return 0; +} + +static int apply_r_mips_hi16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + struct mips_hi16 *n; + + /* + * We cannot relocate this one now because we don't know the value of + * the carry we need to add. Save the information, and let LO16 do the + * actual relocation. + */ + n = kmalloc(sizeof *n, GFP_KERNEL); + if (!n) + return -ENOMEM; + + n->addr = location; + n->value = v; + n->next = mips_hi16_list; + mips_hi16_list = n; + + return 0; +} + +static int apply_r_mips_lo16(struct module *me, uint32_t *location, + Elf32_Addr v) +{ + unsigned long insnlo = *location; + Elf32_Addr val, vallo; + + /* Sign extend the addend we extract from the lo insn. */ + vallo = ((insnlo & 0xffff) ^ 0x8000) - 0x8000; + + if (mips_hi16_list != NULL) { + struct mips_hi16 *l; + + l = mips_hi16_list; + while (l != NULL) { + struct mips_hi16 *next; + unsigned long insn; + + /* + * The value for the HI16 had best be the same. + */ + if (v != l->value) { + printk("%d != %d\n", v, l->value); + goto out_danger; + } + + + /* + * Do the HI16 relocation. Note that we actually don't + * need to know anything about the LO16 itself, except + * where to find the low 16 bits of the addend needed + * by the LO16. + */ + insn = *l->addr; + val = ((insn & 0xffff) << 16) + vallo; + val += v; + + /* + * Account for the sign extension that will happen in + * the low bits. + */ + val = ((val >> 16) + ((val & 0x8000) != 0)) & 0xffff; + + insn = (insn & ~0xffff) | val; + *l->addr = insn; + + next = l->next; + kfree(l); + l = next; + } + + mips_hi16_list = NULL; + } + + /* + * Ok, we're done with the HI16 relocs. Now deal with the LO16. + */ + val = v + vallo; + insnlo = (insnlo & ~0xffff) | (val & 0xffff); + *location = insnlo; + + return 0; + +out_danger: + printk(KERN_ERR "module %s: dangerous " "relocation\n", me->name); + + return -ENOEXEC; +} + +static int (*reloc_handlers[]) (struct module *me, uint32_t *location, + Elf32_Addr v) = { + [R_MIPS_NONE] = apply_r_mips_none, + [R_MIPS_32] = apply_r_mips_32, + [R_MIPS_26] = apply_r_mips_26, + [R_MIPS_HI16] = apply_r_mips_hi16, + [R_MIPS_LO16] = apply_r_mips_lo16, + [R_MIPS_GPREL16] = apply_r_mips_gprel16, + [R_MIPS_PC16] = apply_r_mips_pc16 +}; + + +int apply_relocations(Elf32_Shdr *sechdrs, + const char *strtab, + unsigned int symindex, + unsigned int relsec, + struct module *me) +{ + Elf32_Rel *rel = (void *) sechdrs[relsec].sh_addr; + Elf32_Sym *sym; + uint32_t *location; + unsigned int i; + Elf32_Addr v; + int res; + + for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rel); i++) { + Elf32_Word r_info = rel[i].r_info; + + /* This is where to make the change */ + location = (void *)sechdrs[sechdrs[relsec].sh_info].sh_addr + + rel[i].r_offset; + /* This is the symbol it is referring to */ + sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + + ELF32_R_SYM(r_info); + + if (!sym->st_value) { + printk(KERN_DEBUG "%s: undefined weak symbol %s\n", + me->name, strtab + sym->st_name); + /* just print the warning, dont barf */ + } + + v = sym->st_value; + + res = reloc_handlers[ELF32_R_TYPE(r_info)](me, location, v); + if( res ) { + printk(KERN_DEBUG + "relocation error 0x%x sym refer <%s> value 0x%x " + "type 0x%x r_info 0x%x\n", + (unsigned int)location, strtab + sym->st_name, v, + r_info, ELF32_R_TYPE(r_info)); + } + + if (res) + return res; + } + + return 0; +} + +void save_gp_address(unsigned int secbase, unsigned int rel) +{ + gp_addr = secbase + rel; + gp_offs = gp_addr - (secbase & 0xffff0000); +} +/* end module-elf32.c */ + + + +/* Change all symbols so that sh_value encodes the pointer directly. */ +static int simplify_symbols(Elf_Shdr * sechdrs, + unsigned int symindex, + const char *strtab, + const char *secstrings, + unsigned int nsecs, struct module *mod) +{ + Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; + unsigned long secbase, bssbase = 0; + unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); + int ret = 0, size; + + /* find the .bss section for COMMON symbols */ + for (i = 0; i < nsecs; i++) { + if (strncmp(secstrings + sechdrs[i].sh_name, ".bss", 4) == 0) + bssbase = sechdrs[i].sh_addr; + } + + for (i = 1; i < n; i++) { + switch (sym[i].st_shndx) { + case SHN_COMMON: + /* Allocate space for the symbol in the .bss section. st_value is currently size. + We want it to have the address of the symbol. */ + + size = sym[i].st_value; + sym[i].st_value = bssbase; + + bssbase += size; + break; + + case SHN_ABS: + /* Don't need to do anything */ + break; + + case SHN_UNDEF: + /* ret = -ENOENT; */ + break; + + case SHN_MIPS_SCOMMON: + + printk(KERN_DEBUG + "simplify_symbols: ignoring SHN_MIPS_SCOMMON symbol <%s> st_shndx %d\n", + strtab + sym[i].st_name, sym[i].st_shndx); + + // .sbss section + break; + + default: + secbase = sechdrs[sym[i].st_shndx].sh_addr; + + if (strncmp(strtab + sym[i].st_name, "_gp", 3) == 0) { + save_gp_address(secbase, sym[i].st_value); + } + + sym[i].st_value += secbase; + break; + } + + } + + return ret; +} + +#ifdef DEBUG_ELFLOADER +static void dump_elfsymbols(Elf_Shdr * sechdrs, unsigned int symindex, + const char *strtab, struct module *mod) +{ + Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; + unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); + + printk(KERN_DEBUG "dump_elfsymbols: n %d\n", n); + for (i = 1; i < n; i++) { + printk(KERN_DEBUG " i %d name <%s> 0x%x\n", i, + strtab + sym[i].st_name, sym[i].st_value); + } +} +#endif + +static void dump_tc(struct tc *t) +{ + printk(KERN_WARNING "VPE: TC index %d TCStatus 0x%lx halt 0x%lx\n", + t->index, read_tc_c0_tcstatus(), read_tc_c0_tchalt()); + printk(KERN_WARNING "VPE: tcrestart 0x%lx\n", read_tc_c0_tcrestart()); +} + +static void dump_tclist(void) +{ + struct tc *t; + + list_for_each_entry(t, &vpecontrol.tc_list, list) { + dump_tc(t); + } +} + +/* We are prepared so configure and start the VPE... */ +int vpe_run(vpe_t * v) +{ + unsigned long val; + struct tc *t; + + /* check we are the Master VPE */ + val = read_c0_vpeconf0(); + if (!(val & VPECONF0_MVP)) { + printk(KERN_WARNING + "VPE: only Master VPE's are allowed to configure MT\n"); + return -1; + } + + /* disable MT (using dvpe) */ + dvpe(); + + /* Put MVPE's into 'configuration state' */ + write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC); + + if (!list_empty(&v->tc)) { + if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { + printk(KERN_WARNING "VPE: TC %d is already in use.\n", + t->index); + return -ENOEXEC; + } + } else { + printk(KERN_WARNING "VPE: No TC's associated with VPE %d\n", + v->minor); + return -ENOEXEC; + } + + settc(t->index); + + val = read_vpe_c0_vpeconf0(); + + /* should check it is halted, and not activated */ + if ((read_tc_c0_tcstatus() & TCSTATUS_A) || !(read_tc_c0_tchalt() & TCHALT_H)) { + printk(KERN_WARNING "VPE: TC %d is already doing something!\n", + t->index); + + dump_tclist(); + return -ENOEXEC; + } + + /* Write the address we want it to start running from in the TCPC register. */ + write_tc_c0_tcrestart((unsigned long)v->__start); + + /* write the sivc_info address to tccontext */ + write_tc_c0_tccontext((unsigned long)0); + + /* Set up the XTC bit in vpeconf0 to point at our tc */ + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | (t->index << VPECONF0_XTC_SHIFT)); + + /* mark the TC as activated, not interrupt exempt and not dynamically allocatable */ + val = read_tc_c0_tcstatus(); + val = (val & ~(TCSTATUS_DA | TCSTATUS_IXMT)) | TCSTATUS_A; + write_tc_c0_tcstatus(val); + + write_tc_c0_tchalt(read_tc_c0_tchalt() & ~TCHALT_H); + + /* set up VPE1 */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); // no multiple TC's + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA); // enable this VPE + + /* + * The sde-kit passes 'memsize' to __start in $a3, so set something + * here... + * Or set $a3 (register 7) to zero and define DFLT_STACK_SIZE and + * DFLT_HEAP_SIZE when you compile your program + */ + + mttgpr(7, 0); + + /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + write_vpe_c0_config(read_c0_config()); + + /* clear out any left overs from a previous program */ + write_vpe_c0_cause(0); + + /* take system out of configuration state */ + write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC); + + /* clear interrupts enabled IE, ERL, EXL, and KSU from c0 status */ + write_vpe_c0_status(read_vpe_c0_status() & ~(ST0_ERL | ST0_KSU | ST0_IE | ST0_EXL)); + + /* set it running */ + evpe(EVPE_ENABLE); + + return 0; +} + +static unsigned long find_vpe_symbols(vpe_t * v, Elf_Shdr * sechdrs, + unsigned int symindex, const char *strtab, + struct module *mod) +{ + Elf_Sym *sym = (void *)sechdrs[symindex].sh_addr; + unsigned int i, n = sechdrs[symindex].sh_size / sizeof(Elf_Sym); + + for (i = 1; i < n; i++) { + if (strcmp(strtab + sym[i].st_name, "__start") == 0) { + v->__start = sym[i].st_value; + } + + if (strcmp(strtab + sym[i].st_name, "vpe_shared") == 0) { + v->shared_ptr = (void *)sym[i].st_value; + } + } + + return 0; +} + +/* Allocates a VPE with some program code space(the load address), copies the contents + of the program (p)buffer performing relocatations/etc, free's it when finished. +*/ +int vpe_elfload(vpe_t * v) +{ + Elf_Ehdr *hdr; + Elf_Shdr *sechdrs; + long err = 0; + char *secstrings, *strtab = NULL; + unsigned int len, i, symindex = 0, strindex = 0; + + struct module mod; // so we can re-use the relocations code + + memset(&mod, 0, sizeof(struct module)); + strcpy(mod.name, "VPE dummy prog module"); + + hdr = (Elf_Ehdr *) v->pbuffer; + len = v->plen; + + /* Sanity checks against insmoding binaries or wrong arch, + weird elf version */ + if (memcmp(hdr->e_ident, ELFMAG, 4) != 0 + || hdr->e_type != ET_REL || !elf_check_arch(hdr) + || hdr->e_shentsize != sizeof(*sechdrs)) { + printk(KERN_WARNING + "VPE program, wrong arch or weird elf version\n"); + + return -ENOEXEC; + } + + if (len < hdr->e_shoff + hdr->e_shnum * sizeof(Elf_Shdr)) { + printk(KERN_ERR "VPE program length %u truncated\n", len); + return -ENOEXEC; + } + + /* Convenience variables */ + sechdrs = (void *)hdr + hdr->e_shoff; + secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; + sechdrs[0].sh_addr = 0; + + /* And these should exist, but gcc whinges if we don't init them */ + symindex = strindex = 0; + + for (i = 1; i < hdr->e_shnum; i++) { + + if (sechdrs[i].sh_type != SHT_NOBITS + && len < sechdrs[i].sh_offset + sechdrs[i].sh_size) { + printk(KERN_ERR "VPE program length %u truncated\n", + len); + return -ENOEXEC; + } + + /* Mark all sections sh_addr with their address in the + temporary image. */ + sechdrs[i].sh_addr = (size_t) hdr + sechdrs[i].sh_offset; + + /* Internal symbols and strings. */ + if (sechdrs[i].sh_type == SHT_SYMTAB) { + symindex = i; + strindex = sechdrs[i].sh_link; + strtab = (char *)hdr + sechdrs[strindex].sh_offset; + } + } + + layout_sections(&mod, hdr, sechdrs, secstrings); + + v->load_addr = alloc_progmem(mod.core_size); + memset(v->load_addr, 0, mod.core_size); + + printk("VPE elf_loader: loading to %p\n", v->load_addr); + + for (i = 0; i < hdr->e_shnum; i++) { + void *dest; + + if (!(sechdrs[i].sh_flags & SHF_ALLOC)) + continue; + + dest = v->load_addr + sechdrs[i].sh_entsize; + + if (sechdrs[i].sh_type != SHT_NOBITS) + memcpy(dest, (void *)sechdrs[i].sh_addr, + sechdrs[i].sh_size); + /* Update sh_addr to point to copy in image. */ + sechdrs[i].sh_addr = (unsigned long)dest; + } + + /* Fix up syms, so that st_value is a pointer to location. */ + err = + simplify_symbols(sechdrs, symindex, strtab, secstrings, + hdr->e_shnum, &mod); + if (err < 0) { + printk(KERN_WARNING "VPE: unable to simplify symbols\n"); + goto cleanup; + } + + /* Now do relocations. */ + for (i = 1; i < hdr->e_shnum; i++) { + const char *strtab = (char *)sechdrs[strindex].sh_addr; + unsigned int info = sechdrs[i].sh_info; + + /* Not a valid relocation section? */ + if (info >= hdr->e_shnum) + continue; + + /* Don't bother with non-allocated sections */ + if (!(sechdrs[info].sh_flags & SHF_ALLOC)) + continue; + + if (sechdrs[i].sh_type == SHT_REL) + err = + apply_relocations(sechdrs, strtab, symindex, i, &mod); + else if (sechdrs[i].sh_type == SHT_RELA) + err = apply_relocate_add(sechdrs, strtab, symindex, i, + &mod); + if (err < 0) { + printk(KERN_WARNING + "vpe_elfload: error in relocations err %ld\n", + err); + goto cleanup; + } + } + + /* make sure it's physically written out */ + flush_icache_range((unsigned long)v->load_addr, + (unsigned long)v->load_addr + v->len); + + if ((find_vpe_symbols(v, sechdrs, symindex, strtab, &mod)) < 0) { + + printk(KERN_WARNING + "VPE: program doesn't contain __start or vpe_shared symbols\n"); + err = -ENOEXEC; + } + + printk(" elf loaded\n"); + +cleanup: + return err; +} + +static void dump_vpe(vpe_t * v) +{ + struct tc *t; + + printk(KERN_DEBUG "VPEControl 0x%lx\n", read_vpe_c0_vpecontrol()); + printk(KERN_DEBUG "VPEConf0 0x%lx\n", read_vpe_c0_vpeconf0()); + + list_for_each_entry(t, &vpecontrol.tc_list, list) { + dump_tc(t); + } +} + +/* checks for VPE is unused and gets ready to load program */ +static int vpe_open(struct inode *inode, struct file *filp) +{ + int minor; + vpe_t *v; + + /* assume only 1 device at the mo. */ + if ((minor = MINOR(inode->i_rdev)) != 1) { + printk(KERN_WARNING "VPE: only vpe1 is supported\n"); + return -ENODEV; + } + + if ((v = get_vpe(minor)) == NULL) { + printk(KERN_WARNING "VPE: unable to get vpe\n"); + return -ENODEV; + } + + if (v->state != VPE_STATE_UNUSED) { + unsigned long tmp; + struct tc *t; + + printk(KERN_WARNING "VPE: device %d already in use\n", minor); + + dvpe(); + dump_vpe(v); + + printk(KERN_WARNING "VPE: re-initialising %d\n", minor); + + release_progmem(v->load_addr); + + t = get_tc(minor); + settc(minor); + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + + } + + // allocate it so when we get write ops we know it's expected. + v->state = VPE_STATE_INUSE; + + /* this of-course trashes what was there before... */ + v->pbuffer = vmalloc(P_SIZE); + v->plen = P_SIZE; + v->load_addr = NULL; + v->len = 0; + + return 0; +} + +static int vpe_release(struct inode *inode, struct file *filp) +{ + int minor, ret = 0; + vpe_t *v; + Elf_Ehdr *hdr; + + minor = MINOR(inode->i_rdev); + if ((v = get_vpe(minor)) == NULL) + return -ENODEV; + + // simple case of fire and forget, so tell the VPE to run... + + hdr = (Elf_Ehdr *) v->pbuffer; + if (memcmp(hdr->e_ident, ELFMAG, 4) == 0) { + if (vpe_elfload(v) >= 0) + vpe_run(v); + else { + printk(KERN_WARNING "VPE: ELF load failed.\n"); + ret = -ENOEXEC; + } + } else { + printk(KERN_WARNING "VPE: only elf files are supported\n"); + ret = -ENOEXEC; + } + + // cleanup any temp buffers + if (v->pbuffer) + vfree(v->pbuffer); + v->plen = 0; + return ret; +} + +static ssize_t vpe_write(struct file *file, const char __user * buffer, + size_t count, loff_t * ppos) +{ + int minor; + size_t ret = count; + vpe_t *v; + + minor = MINOR(file->f_dentry->d_inode->i_rdev); + if ((v = get_vpe(minor)) == NULL) + return -ENODEV; + + if (v->pbuffer == NULL) { + printk(KERN_ERR "vpe_write: no pbuffer\n"); + return -ENOMEM; + } + + if ((count + v->len) > v->plen) { + printk(KERN_WARNING + "VPE Loader: elf size too big. Perhaps strip uneeded symbols\n"); + return -ENOMEM; + } + + count -= copy_from_user(v->pbuffer + v->len, buffer, count); + if (!count) { + printk("vpe_write: copy_to_user failed\n"); + return -EFAULT; + } + + v->len += count; + return ret; +} + +static struct file_operations vpe_fops = { + .owner = THIS_MODULE, + .open = vpe_open, + .release = vpe_release, + .write = vpe_write +}; + +/* module wrapper entry points */ +/* give me a vpe */ +vpe_handle vpe_alloc(void) +{ + int i; + struct vpe *v; + + /* find a vpe */ + for (i = 1; i < MAX_VPES; i++) { + if ((v = get_vpe(i)) != NULL) { + v->state = VPE_STATE_INUSE; + return v; + } + } + return NULL; +} + +EXPORT_SYMBOL(vpe_alloc); + +/* start running from here */ +int vpe_start(vpe_handle vpe, unsigned long start) +{ + struct vpe *v = vpe; + + v->__start = start; + return vpe_run(v); +} + +EXPORT_SYMBOL(vpe_start); + +/* halt it for now */ +int vpe_stop(vpe_handle vpe) +{ + struct vpe *v = vpe; + struct tc *t; + unsigned int evpe_flags; + + evpe_flags = dvpe(); + + if ((t = list_entry(v->tc.next, struct tc, tc)) != NULL) { + + settc(t->index); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); + } + + evpe(evpe_flags); + + return 0; +} + +EXPORT_SYMBOL(vpe_stop); + +/* I've done with it thank you */ +int vpe_free(vpe_handle vpe) +{ + struct vpe *v = vpe; + struct tc *t; + unsigned int evpe_flags; + + if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) { + return -ENOEXEC; + } + + evpe_flags = dvpe(); + + /* Put MVPE's into 'configuration state' */ + write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC); + + settc(t->index); + write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() & ~VPECONF0_VPA); + + /* mark the TC unallocated and halt'ed */ + write_tc_c0_tcstatus(read_tc_c0_tcstatus() & ~TCSTATUS_A); + write_tc_c0_tchalt(TCHALT_H); + + v->state = VPE_STATE_UNUSED; + + write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC); + evpe(evpe_flags); + + return 0; +} + +EXPORT_SYMBOL(vpe_free); + +void *vpe_get_shared(int index) +{ + struct vpe *v; + + if ((v = get_vpe(index)) == NULL) { + printk(KERN_WARNING "vpe: invalid vpe index %d\n", index); + return NULL; + } + + return v->shared_ptr; +} + +EXPORT_SYMBOL(vpe_get_shared); + +static int __init vpe_module_init(void) +{ + struct vpe *v = NULL; + struct tc *t; + unsigned long val; + int i; + + if (!cpu_has_mipsmt) { + printk("VPE loader: not a MIPS MT capable processor\n"); + return -ENODEV; + } + + if ((major = register_chrdev(VPE_MAJOR, module_name, &vpe_fops) < 0)) { + printk("VPE loader: unable to register character device\n"); + return -EBUSY; + } + + if (major == 0) + major = VPE_MAJOR; + + dmt(); + dvpe(); + + /* Put MVPE's into 'configuration state' */ + write_c0_mvpcontrol(read_c0_mvpcontrol() | MVPCONTROL_VPC); + + /* dump_mtregs(); */ + + INIT_LIST_HEAD(&vpecontrol.vpe_list); + INIT_LIST_HEAD(&vpecontrol.tc_list); + + val = read_c0_mvpconf0(); + for (i = 0; i < ((val & MVPCONF0_PTC) + 1); i++) { + t = alloc_tc(i); + + /* VPE's */ + if (i < ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1) { + settc(i); + + if ((v = alloc_vpe(i)) == NULL) { + printk(KERN_WARNING "VPE: unable to allocate VPE\n"); + return -ENODEV; + } + + list_add(&t->tc, &v->tc); /* add the tc to the list of this vpe's tc's. */ + + /* deactivate all but vpe0 */ + if (i != 0) { + unsigned long tmp = read_vpe_c0_vpeconf0(); + + tmp &= ~VPECONF0_VPA; + + /* master VPE */ + tmp |= VPECONF0_MVP; + write_vpe_c0_vpeconf0(tmp); + } + + /* disable multi-threading with TC's */ + write_vpe_c0_vpecontrol(read_vpe_c0_vpecontrol() & ~VPECONTROL_TE); + + if (i != 0) { + write_vpe_c0_status((read_c0_status() & + ~(ST0_IM | ST0_IE | ST0_KSU)) + | ST0_CU0); + + /* set config to be the same as vpe0, particularly kseg0 coherency alg */ + write_vpe_c0_config(read_c0_config()); + } + + } + + /* TC's */ + t->pvpe = v; /* set the parent vpe */ + + if (i != 0) { + unsigned long tmp; + + /* tc 0 will of course be running.... */ + if (i == 0) + t->state = TC_STATE_RUNNING; + + settc(i); + + /* bind a TC to each VPE, May as well put all excess TC's + on the last VPE */ + if (i >= (((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT) + 1)) + write_tc_c0_tcbind(read_tc_c0_tcbind() | + ((val & MVPCONF0_PVPE) >> MVPCONF0_PVPE_SHIFT)); + else + write_tc_c0_tcbind(read_tc_c0_tcbind() | i); + + tmp = read_tc_c0_tcstatus(); + + /* mark not allocated and not dynamically allocatable */ + tmp &= ~(TCSTATUS_A | TCSTATUS_DA); + tmp |= TCSTATUS_IXMT; /* interrupt exempt */ + write_tc_c0_tcstatus(tmp); + + write_tc_c0_tchalt(TCHALT_H); + } + } + + /* release config state */ + write_c0_mvpcontrol(read_c0_mvpcontrol() & ~MVPCONTROL_VPC); + + return 0; +} + +static void __exit vpe_module_exit(void) +{ + struct vpe *v, *n; + + list_for_each_entry_safe(v, n, &vpecontrol.vpe_list, list) { + if (v->state != VPE_STATE_UNUSED) { + release_vpe(v); + } + } + + unregister_chrdev(major, module_name); +} + +module_init(vpe_module_init); +module_exit(vpe_module_exit); +MODULE_DESCRIPTION("MIPS VPE Loader"); +MODULE_AUTHOR("Elizabeth Clarke, MIPS Technologies, Inc"); +MODULE_LICENSE("GPL"); diff --git a/arch/mips/mips-boards/generic/init.c b/arch/mips/mips-boards/generic/init.c index d821b13..58256ea 100644 --- a/arch/mips/mips-boards/generic/init.c +++ b/arch/mips/mips-boards/generic/init.c @@ -28,6 +28,8 @@ #include <asm/gt64120.h> #include <asm/io.h> #include <asm/system.h> +#include <asm/cacheflush.h> +#include <asm/traps.h> #include <asm/mips-boards/prom.h> #include <asm/mips-boards/generic.h> @@ -224,6 +226,30 @@ void __init kgdb_config (void) } #endif +void __init mips_nmi_setup (void) +{ + void *base; + extern char except_vec_nmi; + + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa80) : + (void *)(CAC_BASE + 0x380); + memcpy(base, &except_vec_nmi, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + +void __init mips_ejtag_setup (void) +{ + void *base; + extern char except_vec_ejtag_debug; + + base = cpu_has_veic ? + (void *)(CAC_BASE + 0xa00) : + (void *)(CAC_BASE + 0x300); + memcpy(base, &except_vec_ejtag_debug, 0x80); + flush_icache_range((unsigned long)base, (unsigned long)base + 0x80); +} + void __init prom_init(void) { u32 start, map, mask, data; @@ -353,6 +379,9 @@ void __init prom_init(void) while(1); /* We die here... */ } #endif + board_nmi_handler_setup = mips_nmi_setup; + board_ejtag_handler_setup = mips_ejtag_setup; + prom_printf("\nLINUX started...\n"); prom_init_cmdline(); prom_meminit(); diff --git a/arch/mips/mips-boards/generic/memory.c b/arch/mips/mips-boards/generic/memory.c index 5ae2b43..2c8afd7 100644 --- a/arch/mips/mips-boards/generic/memory.c +++ b/arch/mips/mips-boards/generic/memory.c @@ -22,6 +22,7 @@ #include <linux/init.h> #include <linux/mm.h> #include <linux/bootmem.h> +#include <linux/string.h> #include <asm/bootinfo.h> #include <asm/page.h> @@ -55,18 +56,30 @@ struct prom_pmemblock * __init prom_getmdesc(void) { char *memsize_str; unsigned int memsize; + char cmdline[CL_SIZE], *ptr; - memsize_str = prom_getenv("memsize"); - if (!memsize_str) { - prom_printf("memsize not set in boot prom, set to default (32Mb)\n"); - memsize = 0x02000000; - } else { + /* Check the command line first for a memsize directive */ + strcpy(cmdline, arcs_cmdline); + ptr = strstr(cmdline, "memsize="); + if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) + ptr = strstr(ptr, " memsize="); + + if (ptr) { + memsize = memparse(ptr + 8, &ptr); + } + else { + /* otherwise look in the environment */ + memsize_str = prom_getenv("memsize"); + if (!memsize_str) { + prom_printf("memsize not set in boot prom, set to default (32Mb)\n"); + memsize = 0x02000000; + } else { #ifdef DEBUG - prom_printf("prom_memsize = %s\n", memsize_str); + prom_printf("prom_memsize = %s\n", memsize_str); #endif - memsize = simple_strtol(memsize_str, NULL, 0); + memsize = simple_strtol(memsize_str, NULL, 0); + } } - memset(mdesc, 0, sizeof(mdesc)); mdesc[0].type = yamon_dontuse; diff --git a/arch/mips/mips-boards/generic/mipsIRQ.S b/arch/mips/mips-boards/generic/mipsIRQ.S index 131f49b..a397ecb 100644 --- a/arch/mips/mips-boards/generic/mipsIRQ.S +++ b/arch/mips/mips-boards/generic/mipsIRQ.S @@ -29,6 +29,20 @@ #include <asm/regdef.h> #include <asm/stackframe.h> +#ifdef CONFIG_MIPS_ATLAS +#include <asm/mips-boards/atlasint.h> +#define CASCADE_IRQ MIPSCPU_INT_ATLAS +#define CASCADE_DISPATCH atlas_hw0_irqdispatch +#endif +#ifdef CONFIG_MIPS_MALTA +#include <asm/mips-boards/maltaint.h> +#define CASCADE_IRQ MIPSCPU_INT_I8259A +#define CASCADE_DISPATCH malta_hw0_irqdispatch +#endif +#ifdef CONFIG_MIPS_SEAD +#include <asm/mips-boards/seadint.h> +#endif + /* A lot of complication here is taken away because: * * 1) We handle one interrupt and return, sitting in a loop and moving across @@ -80,74 +94,62 @@ mfc0 s0, CP0_CAUSE # get irq bits mfc0 s1, CP0_STATUS # get irq mask + andi s0, ST0_IM # CAUSE.CE may be non-zero! and s0, s1 - /* First we check for r4k counter/timer IRQ. */ - andi a0, s0, CAUSEF_IP7 - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP2 # delay slot, check hw0 interrupt +#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64) + .set mips32 + clz a0, s0 + .set mips0 + negu a0 + addu a0, 31-CAUSEB_IP + bltz a0, spurious +#else + beqz s0, spurious + li a0, 7 - /* Wheee, a timer interrupt. */ - move a0, sp - jal mips_timer_interrupt - nop + and t0, s0, 0xf000 + sltiu t0, t0, 1 + sll t0, 2 + subu a0, t0 + sll s0, t0 - j ret_from_irq - nop + and t0, s0, 0xc000 + sltiu t0, t0, 1 + sll t0, 1 + subu a0, t0 + sll s0, t0 -1: -#if defined(CONFIG_MIPS_SEAD) - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP3 # delay slot, check hw1 interrupt -#else - beq a0, zero, 1f # delay slot, check hw3 interrupt - andi a0, s0, CAUSEF_IP5 + and t0, s0, 0x8000 + sltiu t0, t0, 1 + # sll t0, 0 + subu a0, t0 + # sll s0, t0 #endif - /* Wheee, combined hardware level zero interrupt. */ -#if defined(CONFIG_MIPS_ATLAS) - jal atlas_hw0_irqdispatch -#elif defined(CONFIG_MIPS_MALTA) - jal malta_hw0_irqdispatch -#elif defined(CONFIG_MIPS_SEAD) - jal sead_hw0_irqdispatch -#else -#error "MIPS board not supported\n" -#endif - move a0, sp # delay slot +#ifdef CASCADE_IRQ + li a1, CASCADE_IRQ + bne a0, a1, 1f + addu a0, MIPSCPU_INT_BASE - j ret_from_irq - nop # delay slot + jal CASCADE_DISPATCH + move a0, sp -1: -#if defined(CONFIG_MIPS_SEAD) - beq a0, zero, 1f - andi a0, s0, CAUSEF_IP5 # delay slot, check hw3 interrupt - jal sead_hw1_irqdispatch - move a0, sp # delay slot - j ret_from_irq - nop # delay slot -1: -#endif -#if defined(CONFIG_MIPS_MALTA) - beq a0, zero, 1f # check hw3 (coreHI) interrupt - nop - jal corehi_irqdispatch - move a0, sp j ret_from_irq nop 1: +#else + addu a0, MIPSCPU_INT_BASE #endif - /* - * Here by mistake? This is possible, what can happen is that by the - * time we take the exception the IRQ pin goes low, so just leave if - * this is the case. - */ - move a1,s0 - PRINT("Got interrupt: c0_cause = %08x\n") - mfc0 a1, CP0_EPC - PRINT("c0_epc = %08x\n") + + jal do_IRQ + move a1, sp j ret_from_irq nop + + +spurious: + j spurious_interrupt + nop END(mipsIRQ) diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 1631544..3a6f142 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -31,22 +31,21 @@ #include <asm/mipsregs.h> #include <asm/ptrace.h> +#include <asm/hardirq.h> +#include <asm/irq.h> #include <asm/div64.h> #include <asm/cpu.h> #include <asm/time.h> #include <asm/mc146818-time.h> +#include <asm/msc01_ic.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/prom.h> +#include <asm/mips-boards/maltaint.h> +#include <asm/mc146818-time.h> unsigned long cpu_khz; -#if defined(CONFIG_MIPS_SEAD) -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ5) -#else -#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) -#endif - #if defined(CONFIG_MIPS_ATLAS) static char display_string[] = " LINUX ON ATLAS "; #endif @@ -59,20 +58,27 @@ static char display_string[] = " LINUX ON SEAD "; static unsigned int display_count = 0; #define MAX_DISPLAY_COUNT (sizeof(display_string) - 8) -#define MIPS_CPU_TIMER_IRQ (NR_IRQS-1) - static unsigned int timer_tick_count=0; +static int mips_cpu_timer_irq; -void mips_timer_interrupt(struct pt_regs *regs) +static void mips_timer_dispatch (struct pt_regs *regs) { + do_IRQ (mips_cpu_timer_irq, regs); +} + +irqreturn_t mips_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + irqreturn_t r; + + r = timer_interrupt(irq, dev_id, regs); + if ((timer_tick_count++ % HZ) == 0) { mips_display_message(&display_string[display_count++]); if (display_count == MAX_DISPLAY_COUNT) - display_count = 0; - + display_count = 0; } - ll_timer_interrupt(MIPS_CPU_TIMER_IRQ, regs); + return r; } /* @@ -140,10 +146,8 @@ void __init mips_time_init(void) local_irq_save(flags); -#if defined(CONFIG_MIPS_ATLAS) || defined(CONFIG_MIPS_MALTA) /* Set Data mode - binary. */ CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); -#endif est_freq = estimate_cpu_frequency (); @@ -157,11 +161,22 @@ void __init mips_time_init(void) void __init mips_timer_setup(struct irqaction *irq) { + if (cpu_has_veic) { + set_vi_handler (MSC01E_INT_CPUCTR, mips_timer_dispatch); + mips_cpu_timer_irq = MSC01E_INT_BASE + MSC01E_INT_CPUCTR; + } + else { + if (cpu_has_vint) + set_vi_handler (MIPSCPU_INT_CPUCTR, mips_timer_dispatch); + mips_cpu_timer_irq = MIPSCPU_INT_BASE + MIPSCPU_INT_CPUCTR; + } + + /* we are using the cpu counter for timer interrupts */ - irq->handler = no_action; /* we use our own handler */ - setup_irq(MIPS_CPU_TIMER_IRQ, irq); + irq->handler = mips_timer_interrupt; /* we use our own handler */ + setup_irq(mips_cpu_timer_irq, irq); + /* to generate the first timer interrupt */ write_c0_compare (read_c0_count() + mips_hpt_frequency/HZ); - set_c0_status(ALLINTS); } diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index dd2db35..6f99a44 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -30,6 +30,7 @@ #include <linux/random.h> #include <asm/i8259.h> +#include <asm/irq_cpu.h> #include <asm/io.h> #include <asm/mips-boards/malta.h> #include <asm/mips-boards/maltaint.h> @@ -37,8 +38,10 @@ #include <asm/gt64120.h> #include <asm/mips-boards/generic.h> #include <asm/mips-boards/msc01_pci.h> +#include <asm/msc01_ic.h> extern asmlinkage void mipsIRQ(void); +extern void mips_timer_interrupt(void); static DEFINE_SPINLOCK(mips_irq_lock); @@ -91,13 +94,13 @@ static inline int mips_pcibios_iack(void) return irq; } -static inline int get_int(int *irq) +static inline int get_int(void) { unsigned long flags; - + int irq; spin_lock_irqsave(&mips_irq_lock, flags); - *irq = mips_pcibios_iack(); + irq = mips_pcibios_iack(); /* * IRQ7 is used to detect spurious interrupts. @@ -106,73 +109,82 @@ static inline int get_int(int *irq) * We can differentiate between this situation and a * "Normal" IRQ7 by reading the ISR. */ - if (*irq == 7) + if (irq == 7) { outb(PIIX4_OCW3_SEL | PIIX4_OCW3_ISR, PIIX4_ICTLR1_OCW3); if (!(inb(PIIX4_ICTLR1_OCW3) & (1 << 7))) { - spin_unlock_irqrestore(&mips_irq_lock, flags); + irq = -1; /* Spurious interrupt */ printk("We got a spurious interrupt from PIIX4.\n"); atomic_inc(&irq_err_count); - return -1; /* Spurious interrupt. */ } } spin_unlock_irqrestore(&mips_irq_lock, flags); - return 0; + return irq; } void malta_hw0_irqdispatch(struct pt_regs *regs) { int irq; - if (get_int(&irq)) - return; /* interrupt has already been cleared */ + irq = get_int(); + if (irq < 0) + return; /* interrupt has already been cleared */ - do_IRQ(irq, regs); + do_IRQ(MALTA_INT_BASE+irq, regs); } void corehi_irqdispatch(struct pt_regs *regs) { - unsigned int data,datahi; - - /* Mask out corehi interrupt. */ - clear_c0_status(IE_IRQ3); + unsigned int intrcause,datalo,datahi; + unsigned int pcimstat, intisr, inten, intpol, intedge, intsteer, pcicmd, pcibadaddr; printk("CoreHI interrupt, shouldn't happen, so we die here!!!\n"); printk("epc : %08lx\nStatus: %08lx\nCause : %08lx\nbadVaddr : %08lx\n" , regs->cp0_epc, regs->cp0_status, regs->cp0_cause, regs->cp0_badvaddr); + + /* Read all the registers and then print them as there is a + problem with interspersed printk's upsetting the Bonito controller. + Do it for the others too. + */ + switch(mips_revision_corid) { case MIPS_REVISION_CORID_CORE_MSC: case MIPS_REVISION_CORID_CORE_FPGA2: - case MIPS_REVISION_CORID_CORE_EMUL_MSC: + case MIPS_REVISION_CORID_CORE_EMUL_MSC: + ll_msc_irq(regs); break; case MIPS_REVISION_CORID_QED_RM5261: case MIPS_REVISION_CORID_CORE_LV: case MIPS_REVISION_CORID_CORE_FPGA: case MIPS_REVISION_CORID_CORE_FPGAR2: - data = GT_READ(GT_INTRCAUSE_OFS); - printk("GT_INTRCAUSE = %08x\n", data); - data = GT_READ(GT_CPUERR_ADDRLO_OFS); + intrcause = GT_READ(GT_INTRCAUSE_OFS); + datalo = GT_READ(GT_CPUERR_ADDRLO_OFS); datahi = GT_READ(GT_CPUERR_ADDRHI_OFS); - printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, data); + printk("GT_INTRCAUSE = %08x\n", intrcause); + printk("GT_CPUERR_ADDR = %02x%08x\n", datahi, datalo); break; case MIPS_REVISION_CORID_BONITO64: case MIPS_REVISION_CORID_CORE_20K: case MIPS_REVISION_CORID_CORE_EMUL_BON: - data = BONITO_INTISR; - printk("BONITO_INTISR = %08x\n", data); - data = BONITO_INTEN; - printk("BONITO_INTEN = %08x\n", data); - data = BONITO_INTPOL; - printk("BONITO_INTPOL = %08x\n", data); - data = BONITO_INTEDGE; - printk("BONITO_INTEDGE = %08x\n", data); - data = BONITO_INTSTEER; - printk("BONITO_INTSTEER = %08x\n", data); - data = BONITO_PCICMD; - printk("BONITO_PCICMD = %08x\n", data); + pcibadaddr = BONITO_PCIBADADDR; + pcimstat = BONITO_PCIMSTAT; + intisr = BONITO_INTISR; + inten = BONITO_INTEN; + intpol = BONITO_INTPOL; + intedge = BONITO_INTEDGE; + intsteer = BONITO_INTSTEER; + pcicmd = BONITO_PCICMD; + printk("BONITO_INTISR = %08x\n", intisr); + printk("BONITO_INTEN = %08x\n", inten); + printk("BONITO_INTPOL = %08x\n", intpol); + printk("BONITO_INTEDGE = %08x\n", intedge); + printk("BONITO_INTSTEER = %08x\n", intsteer); + printk("BONITO_PCICMD = %08x\n", pcicmd); + printk("BONITO_PCIBADADDR = %08x\n", pcibadaddr); + printk("BONITO_PCIMSTAT = %08x\n", pcimstat); break; } @@ -180,8 +192,70 @@ void corehi_irqdispatch(struct pt_regs *regs) die("CoreHi interrupt", regs); } +static struct irqaction i8259irq = { + .handler = no_action, + .name = "XT-PIC cascade" +}; + +static struct irqaction corehi_irqaction = { + .handler = no_action, + .name = "CoreHi" +}; + +msc_irqmap_t __initdata msc_irqmap[] = { + {MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0}, +}; +int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t); + +msc_irqmap_t __initdata msc_eicirqmap[] = { + {MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_SW1, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_I8259A, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_SMI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_COREHI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_CORELO, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_TMR, MSC01_IRQ_EDGE, 0}, + {MSC01E_INT_PCI, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0}, + {MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0} +}; +int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t); + void __init arch_init_irq(void) { set_except_vector(0, mipsIRQ); init_i8259_irqs(); + + if (!cpu_has_veic) + mips_cpu_irq_init (MIPSCPU_INT_BASE); + + switch(mips_revision_corid) { + case MIPS_REVISION_CORID_CORE_MSC: + case MIPS_REVISION_CORID_CORE_FPGA2: + case MIPS_REVISION_CORID_CORE_EMUL_MSC: + if (cpu_has_veic) + init_msc_irqs (MSC01E_INT_BASE, msc_eicirqmap, msc_nr_eicirqs); + else + init_msc_irqs (MSC01C_INT_BASE, msc_irqmap, msc_nr_irqs); + } + + if (cpu_has_veic) { + set_vi_handler (MSC01E_INT_I8259A, malta_hw0_irqdispatch); + set_vi_handler (MSC01E_INT_COREHI, corehi_irqdispatch); + setup_irq (MSC01E_INT_BASE+MSC01E_INT_I8259A, &i8259irq); + setup_irq (MSC01E_INT_BASE+MSC01E_INT_COREHI, &corehi_irqaction); + } + else if (cpu_has_vint) { + set_vi_handler (MIPSCPU_INT_I8259A, malta_hw0_irqdispatch); + set_vi_handler (MIPSCPU_INT_COREHI, corehi_irqdispatch); + + setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); + setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); + } + else { + set_except_vector(0, mipsIRQ); + setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_I8259A, &i8259irq); + setup_irq (MIPSCPU_INT_BASE+MIPSCPU_INT_COREHI, &corehi_irqaction); + } } diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index d3e352f..6a1267a 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1228,8 +1228,7 @@ void __init ld_mmu_r4xx0(void) struct cpuinfo_mips *c = ¤t_cpu_data; /* Default cache error handler for R4000 and R5000 family */ - memcpy((void *)(CAC_BASE + 0x100), &except_vec2_generic, 0x80); - memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_generic, 0x80); + set_uncached_handler (0x100, &except_vec2_generic, 0x80); probe_pcache(); setup_scache(); diff --git a/arch/mips/mm/c-sb1.c b/arch/mips/mm/c-sb1.c index e65b1bb..d183dbc 100644 --- a/arch/mips/mm/c-sb1.c +++ b/arch/mips/mm/c-sb1.c @@ -502,9 +502,8 @@ void ld_mmu_sb1(void) extern char handle_vec2_sb1; /* Special cache error handler for SB1 */ - memcpy((void *)(CAC_BASE + 0x100), &except_vec2_sb1, 0x80); - memcpy((void *)(UNCAC_BASE + 0x100), &except_vec2_sb1, 0x80); - memcpy((void *)CKSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80); + set_uncached_handler (0x100, &except_vec2_sb1, 0x80); + memcpy((void *)KSEG1ADDR(&handle_vec2_sb1), &handle_vec2_sb1, 0x80); probe_cache_sizes(); |