diff options
author | Stephen Rothwell <sfr@canb.auug.org.au> | 2008-08-01 05:20:30 (GMT) |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2008-08-04 02:02:00 (GMT) |
commit | b8b572e1015f81b4e748417be2629dfe51ab99f9 (patch) | |
tree | 7df58667d5ed71d6c8f8f4ce40ca16b6fb776d0b /arch/powerpc/include/asm/hvcall.h | |
parent | 2b12a4c524812fb3f6ee590a02e65b95c8c32229 (diff) | |
download | linux-fsl-qoriq-b8b572e1015f81b4e748417be2629dfe51ab99f9.tar.xz |
powerpc: Move include files to arch/powerpc/include/asm
from include/asm-powerpc. This is the result of a
mkdir arch/powerpc/include/asm
git mv include/asm-powerpc/* arch/powerpc/include/asm
Followed by a few documentation/comment fixups and a couple of places
where <asm-powepc/...> was being used explicitly. Of the latter only
one was outside the arch code and it is a driver only built for powerpc.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/include/asm/hvcall.h')
-rw-r--r-- | arch/powerpc/include/asm/hvcall.h | 296 |
1 files changed, 296 insertions, 0 deletions
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h new file mode 100644 index 0000000..fbe2932 --- /dev/null +++ b/arch/powerpc/include/asm/hvcall.h @@ -0,0 +1,296 @@ +#ifndef _ASM_POWERPC_HVCALL_H +#define _ASM_POWERPC_HVCALL_H +#ifdef __KERNEL__ + +#define HVSC .long 0x44000022 + +#define H_SUCCESS 0 +#define H_BUSY 1 /* Hardware busy -- retry later */ +#define H_CLOSED 2 /* Resource closed */ +#define H_NOT_AVAILABLE 3 +#define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ +#define H_PARTIAL 5 +#define H_IN_PROGRESS 14 /* Kind of like busy */ +#define H_PAGE_REGISTERED 15 +#define H_PARTIAL_STORE 16 +#define H_PENDING 17 /* returned from H_POLL_PENDING */ +#define H_CONTINUE 18 /* Returned from H_Join on success */ +#define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ +#define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ + is a good time to retry */ +#define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ + is a good time to retry */ +#define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ +#define H_HARDWARE -1 /* Hardware error */ +#define H_FUNCTION -2 /* Function not supported */ +#define H_PRIVILEGE -3 /* Caller not privileged */ +#define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ +#define H_BAD_MODE -5 /* Illegal msr value */ +#define H_PTEG_FULL -6 /* PTEG is full */ +#define H_NOT_FOUND -7 /* PTE was not found" */ +#define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ +#define H_NO_MEM -9 +#define H_AUTHORITY -10 +#define H_PERMISSION -11 +#define H_DROPPED -12 +#define H_SOURCE_PARM -13 +#define H_DEST_PARM -14 +#define H_REMOTE_PARM -15 +#define H_RESOURCE -16 +#define H_ADAPTER_PARM -17 +#define H_RH_PARM -18 +#define H_RCQ_PARM -19 +#define H_SCQ_PARM -20 +#define H_EQ_PARM -21 +#define H_RT_PARM -22 +#define H_ST_PARM -23 +#define H_SIGT_PARM -24 +#define H_TOKEN_PARM -25 +#define H_MLENGTH_PARM -27 +#define H_MEM_PARM -28 +#define H_MEM_ACCESS_PARM -29 +#define H_ATTR_PARM -30 +#define H_PORT_PARM -31 +#define H_MCG_PARM -32 +#define H_VL_PARM -33 +#define H_TSIZE_PARM -34 +#define H_TRACE_PARM -35 + +#define H_MASK_PARM -37 +#define H_MCG_FULL -38 +#define H_ALIAS_EXIST -39 +#define H_P_COUNTER -40 +#define H_TABLE_FULL -41 +#define H_ALT_TABLE -42 +#define H_MR_CONDITION -43 +#define H_NOT_ENOUGH_RESOURCES -44 +#define H_R_STATE -45 +#define H_RESCINDEND -46 + + +/* Long Busy is a condition that can be returned by the firmware + * when a call cannot be completed now, but the identical call + * should be retried later. This prevents calls blocking in the + * firmware for long periods of time. Annoyingly the firmware can return + * a range of return codes, hinting at how long we should wait before + * retrying. If you don't care for the hint, the macro below is a good + * way to check for the long_busy return codes + */ +#define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ + && (x <= H_LONG_BUSY_END_RANGE)) + +/* Flags */ +#define H_LARGE_PAGE (1UL<<(63-16)) +#define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ +#define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ +#define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ +#define H_PAGE_STATE_CHANGE (1UL<<(63-28)) +#define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) +#define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) +#define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) +#define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE +#define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ +#define H_ANDCOND (1UL<<(63-33)) +#define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ +#define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ +#define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ +#define H_COPY_PAGE (1UL<<(63-49)) +#define H_N (1UL<<(63-61)) +#define H_PP1 (1UL<<(63-62)) +#define H_PP2 (1UL<<(63-63)) + +/* VASI States */ +#define H_VASI_INVALID 0 +#define H_VASI_ENABLED 1 +#define H_VASI_ABORTED 2 +#define H_VASI_SUSPENDING 3 +#define H_VASI_SUSPENDED 4 +#define H_VASI_RESUMED 5 +#define H_VASI_COMPLETED 6 + +/* DABRX flags */ +#define H_DABRX_HYPERVISOR (1UL<<(63-61)) +#define H_DABRX_KERNEL (1UL<<(63-62)) +#define H_DABRX_USER (1UL<<(63-63)) + +/* Each control block has to be on a 4K bondary */ +#define H_CB_ALIGNMENT 4096 + +/* pSeries hypervisor opcodes */ +#define H_REMOVE 0x04 +#define H_ENTER 0x08 +#define H_READ 0x0c +#define H_CLEAR_MOD 0x10 +#define H_CLEAR_REF 0x14 +#define H_PROTECT 0x18 +#define H_GET_TCE 0x1c +#define H_PUT_TCE 0x20 +#define H_SET_SPRG0 0x24 +#define H_SET_DABR 0x28 +#define H_PAGE_INIT 0x2c +#define H_SET_ASR 0x30 +#define H_ASR_ON 0x34 +#define H_ASR_OFF 0x38 +#define H_LOGICAL_CI_LOAD 0x3c +#define H_LOGICAL_CI_STORE 0x40 +#define H_LOGICAL_CACHE_LOAD 0x44 +#define H_LOGICAL_CACHE_STORE 0x48 +#define H_LOGICAL_ICBI 0x4c +#define H_LOGICAL_DCBF 0x50 +#define H_GET_TERM_CHAR 0x54 +#define H_PUT_TERM_CHAR 0x58 +#define H_REAL_TO_LOGICAL 0x5c +#define H_HYPERVISOR_DATA 0x60 +#define H_EOI 0x64 +#define H_CPPR 0x68 +#define H_IPI 0x6c +#define H_IPOLL 0x70 +#define H_XIRR 0x74 +#define H_PERFMON 0x7c +#define H_MIGRATE_DMA 0x78 +#define H_REGISTER_VPA 0xDC +#define H_CEDE 0xE0 +#define H_CONFER 0xE4 +#define H_PROD 0xE8 +#define H_GET_PPP 0xEC +#define H_SET_PPP 0xF0 +#define H_PURR 0xF4 +#define H_PIC 0xF8 +#define H_REG_CRQ 0xFC +#define H_FREE_CRQ 0x100 +#define H_VIO_SIGNAL 0x104 +#define H_SEND_CRQ 0x108 +#define H_COPY_RDMA 0x110 +#define H_REGISTER_LOGICAL_LAN 0x114 +#define H_FREE_LOGICAL_LAN 0x118 +#define H_ADD_LOGICAL_LAN_BUFFER 0x11C +#define H_SEND_LOGICAL_LAN 0x120 +#define H_BULK_REMOVE 0x124 +#define H_MULTICAST_CTRL 0x130 +#define H_SET_XDABR 0x134 +#define H_STUFF_TCE 0x138 +#define H_PUT_TCE_INDIRECT 0x13C +#define H_CHANGE_LOGICAL_LAN_MAC 0x14C +#define H_VTERM_PARTNER_INFO 0x150 +#define H_REGISTER_VTERM 0x154 +#define H_FREE_VTERM 0x158 +#define H_RESET_EVENTS 0x15C +#define H_ALLOC_RESOURCE 0x160 +#define H_FREE_RESOURCE 0x164 +#define H_MODIFY_QP 0x168 +#define H_QUERY_QP 0x16C +#define H_REREGISTER_PMR 0x170 +#define H_REGISTER_SMR 0x174 +#define H_QUERY_MR 0x178 +#define H_QUERY_MW 0x17C +#define H_QUERY_HCA 0x180 +#define H_QUERY_PORT 0x184 +#define H_MODIFY_PORT 0x188 +#define H_DEFINE_AQP1 0x18C +#define H_GET_TRACE_BUFFER 0x190 +#define H_DEFINE_AQP0 0x194 +#define H_RESIZE_MR 0x198 +#define H_ATTACH_MCQP 0x19C +#define H_DETACH_MCQP 0x1A0 +#define H_CREATE_RPT 0x1A4 +#define H_REMOVE_RPT 0x1A8 +#define H_REGISTER_RPAGES 0x1AC +#define H_DISABLE_AND_GETC 0x1B0 +#define H_ERROR_DATA 0x1B4 +#define H_GET_HCA_INFO 0x1B8 +#define H_GET_PERF_COUNT 0x1BC +#define H_MANAGE_TRACE 0x1C0 +#define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 +#define H_QUERY_INT_STATE 0x1E4 +#define H_POLL_PENDING 0x1D8 +#define H_ILLAN_ATTRIBUTES 0x244 +#define H_JOIN 0x298 +#define H_VASI_STATE 0x2A4 +#define H_ENABLE_CRQ 0x2B0 +#define H_SET_MPP 0x2D0 +#define H_GET_MPP 0x2D4 +#define MAX_HCALL_OPCODE H_GET_MPP + +#ifndef __ASSEMBLY__ + +/** + * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments + * @opcode: The hypervisor call to make. + * + * This call supports up to 7 arguments and only returns the status of + * the hcall. Use this version where possible, its slightly faster than + * the other plpar_hcalls. + */ +long plpar_hcall_norets(unsigned long opcode, ...); + +/** + * plpar_hcall: - Make a pseries hypervisor call + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used for all but the craziest of phyp interfaces (see plpar_hcall9) + */ +#define PLPAR_HCALL_BUFSIZE 4 +long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 4 return arguments in. + * + * This call supports up to 6 arguments and 4 return arguments. Use + * PLPAR_HCALL_BUFSIZE to size the return argument buffer. + * + * Used when phyp interface needs to be called in real mode. Similar to + * plpar_hcall, but plpar_hcall_raw works in real mode and does not + * calculate hypervisor call statistics. + */ +long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); + +/** + * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments + * @opcode: The hypervisor call to make. + * @retbuf: Buffer to store up to 9 return arguments in. + * + * This call supports up to 9 arguments and 9 return arguments. Use + * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. + */ +#define PLPAR_HCALL9_BUFSIZE 9 +long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); + +/* For hcall instrumentation. One structure per-hcall, per-CPU */ +struct hcall_stats { + unsigned long num_calls; /* number of calls (on this CPU) */ + unsigned long tb_total; /* total wall time (mftb) of calls. */ + unsigned long purr_total; /* total cpu time (PURR) of calls. */ +}; +#define HCALL_STAT_ARRAY_SIZE ((MAX_HCALL_OPCODE >> 2) + 1) + +struct hvcall_mpp_data { + unsigned long entitled_mem; + unsigned long mapped_mem; + unsigned short group_num; + unsigned short pool_num; + unsigned char mem_weight; + unsigned char unallocated_mem_weight; + unsigned long unallocated_entitlement; /* value in bytes */ + unsigned long pool_size; + signed long loan_request; + unsigned long backing_mem; +}; + +int h_get_mpp(struct hvcall_mpp_data *); +#endif /* __ASSEMBLY__ */ +#endif /* __KERNEL__ */ +#endif /* _ASM_POWERPC_HVCALL_H */ |