diff options
author | Paul Mackerras <paulus@samba.org> | 2006-03-27 10:48:57 (GMT) |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2006-03-27 10:48:57 (GMT) |
commit | 9618edab82fda8dbce5ea3abcdac9ded07abb2d4 (patch) | |
tree | 8edacdcf4d0ecdd8a7b5b0f88f3cf68c393afbc5 /arch/powerpc/platforms/chrp/setup.c | |
parent | d0cc0dfa2dcf18854144b16a74502bd25c4eaedf (diff) | |
download | linux-fsl-qoriq-9618edab82fda8dbce5ea3abcdac9ded07abb2d4.tar.xz |
powerpc: Fix event-scan code for 32-bit CHRP
On CHRP machines we are supposed to call into firmware (RTAS)
periodically, to give it a chance to check for errors and other
events. Under ppc we had some special code in timer_interrupt
to do this, but that didn't get transferred over to arch/powerpc.
Instead, we use an array of timer_list structs, one per CPU,
and use add_timer_on to make sure each one gets called on the
appropriate CPU.
With this we can remove the heartbeat_* elements of the ppc_md
struct.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/platforms/chrp/setup.c')
-rw-r--r-- | arch/powerpc/platforms/chrp/setup.c | 64 |
1 files changed, 45 insertions, 19 deletions
diff --git a/arch/powerpc/platforms/chrp/setup.c b/arch/powerpc/platforms/chrp/setup.c index 8bf4307..9c718bb 100644 --- a/arch/powerpc/platforms/chrp/setup.c +++ b/arch/powerpc/platforms/chrp/setup.c @@ -35,6 +35,7 @@ #include <linux/root_dev.h> #include <linux/initrd.h> #include <linux/module.h> +#include <linux/timer.h> #include <asm/io.h> #include <asm/pgtable.h> @@ -61,6 +62,10 @@ EXPORT_SYMBOL(_chrp_type); struct mpic *chrp_mpic; +/* Used for doing CHRP event-scans */ +DEFINE_PER_CPU(struct timer_list, heartbeat_timer); +unsigned long event_scan_interval; + /* * XXX this should be in xmon.h, but putting it there means xmon.h * has to include <linux/interrupt.h> (to get irqreturn_t), which @@ -229,8 +234,6 @@ void __init chrp_setup_arch(void) { struct device_node *root = find_path_device ("/"); char *machine = NULL; - struct device_node *device; - unsigned int *p = NULL; /* init to some ~sane value until calibrate_delay() runs */ loops_per_jiffy = 50000000/HZ; @@ -287,21 +290,6 @@ void __init chrp_setup_arch(void) */ sio_init(); - /* Get the event scan rate for the rtas so we know how - * often it expects a heartbeat. -- Cort - */ - device = find_devices("rtas"); - if (device) - p = (unsigned int *) get_property - (device, "rtas-event-scan-rate", NULL); - if (p && *p) { - ppc_md.heartbeat = chrp_event_scan; - ppc_md.heartbeat_reset = HZ / (*p * 30) - 1; - ppc_md.heartbeat_count = 1; - printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", - *p, ppc_md.heartbeat_reset); - } - pci_create_OF_bus_map(); /* @@ -312,7 +300,7 @@ void __init chrp_setup_arch(void) } void -chrp_event_scan(void) +chrp_event_scan(unsigned long unused) { unsigned char log[1024]; int ret = 0; @@ -320,7 +308,8 @@ chrp_event_scan(void) /* XXX: we should loop until the hardware says no more error logs -- Cort */ rtas_call(rtas_token("event-scan"), 4, 1, &ret, 0xffffffff, 0, __pa(log), 1024); - ppc_md.heartbeat_count = ppc_md.heartbeat_reset; + mod_timer(&__get_cpu_var(heartbeat_timer), + jiffies + event_scan_interval); } /* @@ -465,6 +454,9 @@ void __init chrp_init_IRQ(void) void __init chrp_init2(void) { + struct device_node *device; + unsigned int *p = NULL; + #ifdef CONFIG_NVRAM chrp_nvram_init(); #endif @@ -476,6 +468,40 @@ chrp_init2(void) request_region(0x80,0x10,"dma page reg"); request_region(0xc0,0x20,"dma2"); + /* Get the event scan rate for the rtas so we know how + * often it expects a heartbeat. -- Cort + */ + device = find_devices("rtas"); + if (device) + p = (unsigned int *) get_property + (device, "rtas-event-scan-rate", NULL); + if (p && *p) { + /* + * Arrange to call chrp_event_scan at least *p times + * per minute. We use 59 rather than 60 here so that + * the rate will be slightly higher than the minimum. + * This all assumes we don't do hotplug CPU on any + * machine that needs the event scans done. + */ + unsigned long interval, offset; + int cpu, ncpus; + struct timer_list *timer; + + interval = HZ * 59 / *p; + offset = HZ; + ncpus = num_online_cpus(); + event_scan_interval = ncpus * interval; + for (cpu = 0; cpu < ncpus; ++cpu) { + timer = &per_cpu(heartbeat_timer, cpu); + setup_timer(timer, chrp_event_scan, 0); + timer->expires = jiffies + offset; + add_timer_on(timer, cpu); + offset += interval; + } + printk("RTAS Event Scan Rate: %u (%lu jiffies)\n", + *p, interval); + } + if (ppc_md.progress) ppc_md.progress(" Have fun! ", 0x7777); } |