powerpc/book3e: Add Chroma as a new WSP/PowerEN platform.

This patch add the Chroma platform to WSP/PowerEN, which is a PCIe
card (a defconfig is included).

The card includes an H8 service processor that is used to manage the
card.  The H8 is connected over the second serial UART on the PowerEN
chip so this patch includes a simple 16550 driver to enable
communication, mostly for "power off" and "rebooting".

This patch also includes a, WSP specific, "halt" method that will shut
of all A2 cores but still leave power on at the chip level.  This is
desirable, especially if you wish to interrogate the chip with a
hardware probe after the halt.

Signed-off-by: Jimi Xenidis <jimix@pobox.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>

1 files changed, 115 insertions, 0 deletions

diff --git a/arch/powerpc/platforms/wsp/wsp.c b/arch/powerpc/platforms/wsp/wsp.c
new file mode 100644
index 0000000..d25cc96
--- /dev/null
+++ b/arch/powerpc/platforms/wsp/wsp.c
@@ -0,0 +1,115 @@
+/*
+ * Copyright 2008-2011, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/smp.h>
+#include <linux/delay.h>
+#include <linux/time.h>
+
+#include <asm/scom.h>
+
+#include "wsp.h"
+#include "ics.h"
+
+#define WSP_SOC_COMPATIBLE	"ibm,wsp-soc"
+#define PBIC_COMPATIBLE		"ibm,wsp-pbic"
+#define COPRO_COMPATIBLE	"ibm,wsp-coprocessor"
+
+static int __init wsp_probe_buses(void)
+{
+	static __initdata struct of_device_id bus_ids[] = {
+		/*
+		 * every node in between needs to be here or you won't
+		 * find it
+		 */
+		{ .compatible = WSP_SOC_COMPATIBLE, },
+		{ .compatible = PBIC_COMPATIBLE, },
+		{ .compatible = COPRO_COMPATIBLE, },
+		{},
+	};
+	of_platform_bus_probe(NULL, bus_ids, NULL);
+
+	return 0;
+}
+
+void __init wsp_setup_arch(void)
+{
+	/* init to some ~sane value until calibrate_delay() runs */
+	loops_per_jiffy = 50000000;
+
+	scom_init_wsp();
+
+	/* Setup SMP callback */
+#ifdef CONFIG_SMP
+	a2_setup_smp();
+#endif
+#ifdef CONFIG_PCI
+	wsp_setup_pci();
+#endif
+}
+
+void __init wsp_setup_irq(void)
+{
+	wsp_init_irq();
+	opb_pic_init();
+}
+
+
+int __init wsp_probe_devices(void)
+{
+	struct device_node *np;
+
+	/* Our RTC is a ds1500. It seems to be programatically compatible
+	 * with the ds1511 for which we have a driver so let's use that
+	 */
+	np = of_find_compatible_node(NULL, NULL, "dallas,ds1500");
+	if (np != NULL) {
+		struct resource res;
+		if (of_address_to_resource(np, 0, &res) == 0)
+			platform_device_register_simple("ds1511", 0, &res, 1);
+	}
+
+	wsp_probe_buses();
+
+	return 0;
+}
+
+void wsp_halt(void)
+{
+	u64 val;
+	scom_map_t m;
+	struct device_node *dn;
+	struct device_node *mine;
+	struct device_node *me;
+
+	me = of_get_cpu_node(smp_processor_id(), NULL);
+	mine = scom_find_parent(me);
+
+	/* This will halt all the A2s but not power off the chip */
+	for_each_node_with_property(dn, "scom-controller") {
+		if (dn == mine)
+			continue;
+		m = scom_map(dn, 0, 1);
+
+		/* read-modify-write it so the HW probe does not get
+		 * confused */
+		val = scom_read(m, 0);
+		val |= 1;
+		scom_write(m, 0, val);
+		scom_unmap(m);
+	}
+	m = scom_map(mine, 0, 1);
+	val = scom_read(m, 0);
+	val |= 1;
+	scom_write(m, 0, val);
+	/* should never return */
+	scom_unmap(m);
+}