Merge commit 'kumar/kumar-next' into next

12 files changed, 111 insertions, 17 deletions

diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
index a428f8d..5177bdd 100644
--- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c
@@ -42,7 +42,7 @@ static void __init mpc831x_rdb_setup_arch(void)
 	mpc831x_usb_cfg();
 }
 
-void __init mpc831x_rdb_init_IRQ(void)
+static void __init mpc831x_rdb_init_IRQ(void)
 {
 	struct device_node *np;
 
diff --git a/arch/powerpc/platforms/83xx/mpc832x_mds.c b/arch/powerpc/platforms/83xx/mpc832x_mds.c
index ec43477..ec0b401b 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_mds.c
@@ -49,8 +49,6 @@
 #define DBG(fmt...)
 #endif
 
-static u8 *bcsr_regs = NULL;
-
 /* ************************************************************************
  *
  * Setup the architecture
@@ -59,13 +57,14 @@ static u8 *bcsr_regs = NULL;
 static void __init mpc832x_sys_setup_arch(void)
 {
 	struct device_node *np;
+	u8 __iomem *bcsr_regs = NULL;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc832x_sys_setup_arch()", 0);
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
-	if (np != 0) {
+	if (np) {
 		struct resource res;
 
 		of_address_to_resource(np, 0, &res);
@@ -93,9 +92,9 @@ static void __init mpc832x_sys_setup_arch(void)
 			!= NULL){
 		/* Reset the Ethernet PHYs */
 #define BCSR8_FETH_RST 0x50
-		bcsr_regs[8] &= ~BCSR8_FETH_RST;
+		clrbits8(&bcsr_regs[8], BCSR8_FETH_RST);
 		udelay(1000);
-		bcsr_regs[8] |= BCSR8_FETH_RST;
+		setbits8(&bcsr_regs[8], BCSR8_FETH_RST);
 		iounmap(bcsr_regs);
 		of_node_put(np);
 	}
diff --git a/arch/powerpc/platforms/83xx/mpc832x_rdb.c b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
index 0300268..2a1295f 100644
--- a/arch/powerpc/platforms/83xx/mpc832x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc832x_rdb.c
@@ -38,6 +38,7 @@
 #define DBG(fmt...)
 #endif
 
+#ifdef CONFIG_QUICC_ENGINE
 static void mpc83xx_spi_activate_cs(u8 cs, u8 polarity)
 {
 	pr_debug("%s %d %d\n", __func__, cs, polarity);
@@ -77,8 +78,8 @@ static int __init mpc832x_spi_init(void)
 			    mpc83xx_spi_activate_cs,
 			    mpc83xx_spi_deactivate_cs);
 }
-
 machine_device_initcall(mpc832x_rdb, mpc832x_spi_init);
+#endif /* CONFIG_QUICC_ENGINE */
 
 /* ************************************************************************
  *
@@ -130,7 +131,7 @@ static int __init mpc832x_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc832x_rdb, mpc832x_declare_of_platform_devices);
 
-void __init mpc832x_rdb_init_IRQ(void)
+static void __init mpc832x_rdb_init_IRQ(void)
 {
 
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/83xx/mpc836x_mds.c b/arch/powerpc/platforms/83xx/mpc836x_mds.c
index 9d46e5b..09e9d6f 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_mds.c
@@ -18,6 +18,7 @@
 
 #include <linux/stddef.h>
 #include <linux/kernel.h>
+#include <linux/compiler.h>
 #include <linux/init.h>
 #include <linux/errno.h>
 #include <linux/reboot.h>
@@ -43,6 +44,7 @@
 #include <asm/udbg.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <sysdev/simple_gpio.h>
 #include <asm/qe.h>
 #include <asm/qe_ic.h>
 
@@ -55,8 +57,6 @@
 #define DBG(fmt...)
 #endif
 
-static u8 *bcsr_regs = NULL;
-
 /* ************************************************************************
  *
  * Setup the architecture
@@ -65,13 +65,14 @@ static u8 *bcsr_regs = NULL;
 static void __init mpc836x_mds_setup_arch(void)
 {
 	struct device_node *np;
+	u8 __iomem *bcsr_regs = NULL;
 
 	if (ppc_md.progress)
 		ppc_md.progress("mpc836x_mds_setup_arch()", 0);
 
 	/* Map BCSR area */
 	np = of_find_node_by_name(NULL, "bcsr");
-	if (np != 0) {
+	if (np) {
 		struct resource res;
 
 		of_address_to_resource(np, 0, &res);
@@ -93,6 +94,16 @@ static void __init mpc836x_mds_setup_arch(void)
 
 		for (np = NULL; (np = of_find_node_by_name(np, "ucc")) != NULL;)
 			par_io_of_config(np);
+#ifdef CONFIG_QE_USB
+		/* Must fixup Par IO before QE GPIO chips are registered. */
+		par_io_config_pin(1,  2, 1, 0, 3, 0); /* USBOE  */
+		par_io_config_pin(1,  3, 1, 0, 3, 0); /* USBTP  */
+		par_io_config_pin(1,  8, 1, 0, 1, 0); /* USBTN  */
+		par_io_config_pin(1, 10, 2, 0, 3, 0); /* USBRXD */
+		par_io_config_pin(1,  9, 2, 1, 3, 0); /* USBRP  */
+		par_io_config_pin(1, 11, 2, 1, 3, 0); /* USBRN  */
+		par_io_config_pin(2, 20, 2, 0, 1, 0); /* CLK21  */
+#endif /* CONFIG_QE_USB */
 	}
 
 	if ((np = of_find_compatible_node(NULL, "network", "ucc_geth"))
@@ -151,6 +162,70 @@ static int __init mpc836x_declare_of_platform_devices(void)
 }
 machine_device_initcall(mpc836x_mds, mpc836x_declare_of_platform_devices);
 
+#ifdef CONFIG_QE_USB
+static int __init mpc836x_usb_cfg(void)
+{
+	u8 __iomem *bcsr;
+	struct device_node *np;
+	const char *mode;
+	int ret = 0;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8360mds-bcsr");
+	if (!np)
+		return -ENODEV;
+
+	bcsr = of_iomap(np, 0);
+	of_node_put(np);
+	if (!bcsr)
+		return -ENOMEM;
+
+	np = of_find_compatible_node(NULL, NULL, "fsl,mpc8323-qe-usb");
+	if (!np) {
+		ret = -ENODEV;
+		goto err;
+	}
+
+#define BCSR8_TSEC1M_MASK	(0x3 << 6)
+#define BCSR8_TSEC1M_RGMII	(0x0 << 6)
+#define BCSR8_TSEC2M_MASK	(0x3 << 4)
+#define BCSR8_TSEC2M_RGMII	(0x0 << 4)
+	/*
+	 * Default is GMII (2), but we should set it to RGMII (0) if we use
+	 * USB (Eth PHY is in RGMII mode anyway).
+	 */
+	clrsetbits_8(&bcsr[8], BCSR8_TSEC1M_MASK | BCSR8_TSEC2M_MASK,
+			       BCSR8_TSEC1M_RGMII | BCSR8_TSEC2M_RGMII);
+
+#define BCSR13_USBMASK	0x0f
+#define BCSR13_nUSBEN	0x08 /* 1 - Disable, 0 - Enable			*/
+#define BCSR13_USBSPEED	0x04 /* 1 - Full, 0 - Low			*/
+#define BCSR13_USBMODE	0x02 /* 1 - Host, 0 - Function			*/
+#define BCSR13_nUSBVCC	0x01 /* 1 - gets VBUS, 0 - supplies VBUS 	*/
+
+	clrsetbits_8(&bcsr[13], BCSR13_USBMASK, BCSR13_USBSPEED);
+
+	mode = of_get_property(np, "mode", NULL);
+	if (mode && !strcmp(mode, "peripheral")) {
+		setbits8(&bcsr[13], BCSR13_nUSBVCC);
+		qe_usb_clock_set(QE_CLK21, 48000000);
+	} else {
+		setbits8(&bcsr[13], BCSR13_USBMODE);
+		/*
+		 * The BCSR GPIOs are used to control power and
+		 * speed of the USB transceiver. This is needed for
+		 * the USB Host only.
+		 */
+		simple_gpiochip_init("fsl,mpc8360mds-bcsr-gpio");
+	}
+
+	of_node_put(np);
+err:
+	iounmap(bcsr);
+	return ret;
+}
+machine_arch_initcall(mpc836x_mds, mpc836x_usb_cfg);
+#endif /* CONFIG_QE_USB */
+
 static void __init mpc836x_mds_init_IRQ(void)
 {
 	struct device_node *np;
diff --git a/arch/powerpc/platforms/83xx/mpc836x_rdk.c b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
index a5273bb..b0090aa 100644
--- a/arch/powerpc/platforms/83xx/mpc836x_rdk.c
+++ b/arch/powerpc/platforms/83xx/mpc836x_rdk.c
@@ -51,8 +51,9 @@ static void __init mpc836x_rdk_setup_arch(void)
 	for_each_compatible_node(np, "pci", "fsl,mpc8349-pci")
 		mpc83xx_add_bridge(np);
 #endif
-
+#ifdef CONFIG_QUICC_ENGINE
 	qe_reset();
+#endif
 }
 
 static void __init mpc836x_rdk_init_IRQ(void)
@@ -71,13 +72,14 @@ static void __init mpc836x_rdk_init_IRQ(void)
 	 */
 	ipic_set_default_priority();
 	of_node_put(np);
-
+#ifdef CONFIG_QUICC_ENGINE
 	np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic");
 	if (!np)
 		return;
 
 	qe_ic_init(np, 0, qe_ic_cascade_low_ipic, qe_ic_cascade_high_ipic);
 	of_node_put(np);
+#endif
 }
 
 /*
diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c
index 8bb13c8..530ef99 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_mds.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c
@@ -26,7 +26,6 @@
 #define BCSR12_USB_SER_MASK	0x8a
 #define BCSR12_USB_SER_PIN	0x80
 #define BCSR12_USB_SER_DEVICE	0x02
-extern int mpc837x_usb_cfg(void);
 
 static int mpc837xmds_usb_cfg(void)
 {
diff --git a/arch/powerpc/platforms/83xx/mpc837x_rdb.c b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
index da030af..1d09654 100644
--- a/arch/powerpc/platforms/83xx/mpc837x_rdb.c
+++ b/arch/powerpc/platforms/83xx/mpc837x_rdb.c
@@ -21,8 +21,6 @@
 
 #include "mpc83xx.h"
 
-extern int mpc837x_usb_cfg(void);
-
 /* ************************************************************************
  *
  * Setup the architecture
diff --git a/arch/powerpc/platforms/83xx/mpc83xx.h b/arch/powerpc/platforms/83xx/mpc83xx.h
index 2a7cbab..83cfe51 100644
--- a/arch/powerpc/platforms/83xx/mpc83xx.h
+++ b/arch/powerpc/platforms/83xx/mpc83xx.h
@@ -61,6 +61,7 @@
 
 extern void mpc83xx_restart(char *cmd);
 extern long mpc83xx_time_init(void);
+extern int mpc837x_usb_cfg(void);
 extern int mpc834x_usb_cfg(void);
 extern int mpc831x_usb_cfg(void);
 
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index a8301c8..7326d90 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -148,6 +148,9 @@ static int mpc85xx_exclude_device(struct pci_controller *hose,
 /*
  * Setup the architecture
  */
+#ifdef CONFIG_SMP
+extern void __init mpc85xx_smp_init(void);
+#endif
 static void __init mpc85xx_ds_setup_arch(void)
 {
 #ifdef CONFIG_PCI
@@ -173,6 +176,10 @@ static void __init mpc85xx_ds_setup_arch(void)
 	ppc_md.pci_exclude_device = mpc85xx_exclude_device;
 #endif
 
+#ifdef CONFIG_SMP
+	mpc85xx_smp_init();
+#endif
+
 	printk("MPC85xx DS board from Freescale Semiconductor\n");
 }
 
diff --git a/arch/powerpc/platforms/85xx/smp.c b/arch/powerpc/platforms/85xx/smp.c
index d652c71..79a0df1 100644
--- a/arch/powerpc/platforms/85xx/smp.c
+++ b/arch/powerpc/platforms/85xx/smp.c
@@ -58,6 +58,7 @@ smp_85xx_kick_cpu(int nr)
 
 	if (cpu_rel_addr == NULL) {
 		printk(KERN_ERR "No cpu-release-addr for cpu %d\n", nr);
+		local_irq_restore(flags);
 		return;
 	}
 
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index 47e956c..47fe2be 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -312,4 +312,15 @@ config MPC8xxx_GPIO
 	  Say Y here if you're going to use hardware that connects to the
 	  MPC831x/834x/837x/8572/8610 GPIOs.
 
+config SIMPLE_GPIO
+	bool "Support for simple, memory-mapped GPIO controllers"
+	depends on PPC
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	help
+	  Say Y here to support simple, memory-mapped GPIO controllers.
+	  These are usually BCSRs used to control board's switches, LEDs,
+	  chip-selects, Ethernet/USB PHY's power and various other small
+	  on-board peripherals.
+
 endmenu
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 3d0c776..e868b5c 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -231,7 +231,7 @@ config VIRT_CPU_ACCOUNTING
 	  If in doubt, say Y here.
 
 config SMP
-	depends on PPC_STD_MMU
+	depends on PPC_STD_MMU || FSL_BOOKE
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU. If you have