powerpc/fsl-booke: Add initial T104x_QDS board support

T104xQDS board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
	- PCI Express: supporting Gen 1 and Gen 2
	- SGMII
	- QSGMII
	- SATA 2.0
- DDR Controller
	- Supports rates of up to 1600 MHz data-rate
	- Supports one DDR3LP UDIMM/RDIMMs, of single-, dual- or quad-rank types.
- IFC/Local Bus
	- NAND flash: 8-bit, async, up to 2GB.
	- NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
	- GASIC: Simple (minimal) target within Qixis FPGA
	- PromJET rapid memory download support
- Ethernet
	- Two on-board RGMII 10/100/1G ethernet ports.
	- PHY #0 remains powered up during deep-sleep (T1040 only)
- QIXIS System Logic FPGA
- Clocks
	- System and DDR clock (SYSCLK, “DDRCLK”)
	- SERDES clocks
- Power Supplies
- Video
	- DIU supports video at up to 1280x1024x32bpp
- USB
	- Supports two USB 2.0 ports with integrated PHYs
	- Two type A ports with 5V@1.5A per port.
	- Second port can be converted to OTG mini-AB
- SD/MMC Interface
	- SDHC port connects directly to an adapter card slot, featuring:
	- Supporting SD slots for: SD, SDHC (1x, 4x, 8x) and/or MMC
	- Supporting eMMC memory devices
- SPI
	- On-board support of 3 different devices and sizes
- TDM
	- QE-TDM
- Other IO
	- Two Serial ports
	- ProfiBus port
	- Four I2C ports

Add support for T104x QDS board (T1040QDS, T1042QDS):
-add device tree
-add entry is added in corenet_generic.c as it is similar to other corenet
 platforms.
-add entry in Kconfig to build
-add t1040_32bit_smp_defconfig, t1040_64bit_smp_defconfig
	-T1040 has FMANv3, hence CONFIG_FMAN_T4240 needs to be defined.
	-So corenet32_smp_defconfig and corenet64_smp_defconfig cannot be used.

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: Jiucheng Xu <Jiucheng.Xu@freescale.com>
Signed-off-by: Stefan Sicleru <stefan.sicleru@freescale.com>
Signed-off-by: Alex Marginean <alexandru.marginean@freescale.com>
Signed-off-by: Razvan Stefanescu <razvan.stefanescu@freescale.com>
Signed-off-by: Nikhil Badola <Nikhil.Badola@freescale.com>
Signed-off-by: Sandeep Singh <Sandeep@freescale.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
Change-Id: Icfd66c050fbbc39a8693e6b00550736fa9313e12
Reviewed-on: http://git.am.freescale.net:8181/10134
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Qiang Zhao <qiang.zhao@freescale.com>
Reviewed-by: Jose Rivera <German.Rivera@freescale.com>

2 files changed, 5 insertions, 1 deletions

diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index 2179da3..e9ce7cd 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -284,7 +284,7 @@ config CORENET_GENERIC
 	  For 64bit kernel, the following boards are supported:
 	    T208x QDS and RDB, T4240 QDS and B4 QDS
 	  The following boards are supported for both 32bit and 64bit kernel:
-	    P5020 DS and P5040 DS
+	    P5020 DS, P5040 DS, T104xQDS
 
 endif # FSL_SOC_BOOKE
 
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index d0bcdba..924b2bd 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -132,6 +132,8 @@ static const char * const boards[] __initconst = {
 	"fsl,P4080DS",
 	"fsl,P5020DS",
 	"fsl,P5040DS",
+	"fsl,T1040QDS",
+	"fsl,T1042QDS",
 	"fsl,T2080QDS",
 	"fsl,T2081QDS",
 	"fsl,T2080RDB",
@@ -148,6 +150,8 @@ static const char * const hv_boards[] __initconst = {
 	"fsl,P4080DS-hv",
 	"fsl,P5020DS-hv",
 	"fsl,P5040DS-hv",
+	"fsl,T1040QDS-hv",
+	"fsl,T1042QDS-hv",
 	"fsl,T2080QDS-hv",
 	"fsl,T2081QDS-hv",
 	"fsl,T2080RDB-hv",