summaryrefslogtreecommitdiff
path: root/arch/powerpc
diff options
context:
space:
mode:
authorAndy Fleming <afleming@freescale.com>2006-08-18 23:03:08 (GMT)
committerPaul Mackerras <paulus@samba.org>2006-08-23 05:51:18 (GMT)
commit4c86cd9c59428a40233fb707f5de18caa5ab5cb7 (patch)
treeb0ad76cbfdb48041e2f393cc2886c0c79e83ccbc /arch/powerpc
parent9e8a9bc2d2c3ac3b8542cc5c2544248df6f3f1c5 (diff)
downloadlinux-fsl-qoriq-4c86cd9c59428a40233fb707f5de18caa5ab5cb7.tar.xz
[POWERPC] Fix interrupts on 8540 ADS board
* Fixed 8540 ADS support for the new irq layer * Fixed 8540 ADS support for mapping PCI interrupts * Updated 8540 ADS to use device tree for interrupt assignment and sense values Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc')
-rw-r--r--arch/powerpc/platforms/85xx/mpc85xx_ads.c162
1 files changed, 55 insertions, 107 deletions
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
index 06a4976..9d2acfb 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c
@@ -37,79 +37,7 @@ unsigned long isa_io_base = 0;
unsigned long isa_mem_base = 0;
#endif
-/*
- * Internal interrupts are all Level Sensitive, and Positive Polarity
- *
- * Note: Likely, this table and the following function should be
- * obtained and derived from the OF Device Tree.
- */
-static u_char mpc85xx_ads_openpic_initsenses[] __initdata = {
- MPC85XX_INTERNAL_IRQ_SENSES,
- 0x0, /* External 0: */
-#if defined(CONFIG_PCI)
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 1: PCI slot 0 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 2: PCI slot 1 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 3: PCI slot 2 */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* Ext 4: PCI slot 3 */
-#else
- 0x0, /* External 1: */
- 0x0, /* External 2: */
- 0x0, /* External 3: */
- 0x0, /* External 4: */
-#endif
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 5: PHY */
- 0x0, /* External 6: */
- (IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE), /* External 7: PHY */
- 0x0, /* External 8: */
- 0x0, /* External 9: */
- 0x0, /* External 10: */
- 0x0, /* External 11: */
-};
-
#ifdef CONFIG_PCI
-/*
- * interrupt routing
- */
-
-int
-mpc85xx_map_irq(struct pci_dev *dev, unsigned char idsel, unsigned char pin)
-{
- static char pci_irq_table[][4] =
- /*
- * This is little evil, but works around the fact
- * that revA boards have IDSEL starting at 18
- * and others boards (older) start at 12
- *
- * PCI IDSEL/INTPIN->INTLINE
- * A B C D
- */
- {
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 2 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 5 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 12 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 15 */
- {0, 0, 0, 0}, /* -- */
- {0, 0, 0, 0}, /* -- */
- {PIRQA, PIRQB, PIRQC, PIRQD}, /* IDSEL 18 */
- {PIRQD, PIRQA, PIRQB, PIRQC},
- {PIRQC, PIRQD, PIRQA, PIRQB},
- {PIRQB, PIRQC, PIRQD, PIRQA}, /* IDSEL 21 */
- };
-
- const long min_idsel = 2, max_idsel = 21, irqs_per_slot = 4;
- return PCI_IRQ_TABLE_LOOKUP;
-}
-
int
mpc85xx_exclude_device(u_char bus, u_char devfn)
{
@@ -119,44 +47,63 @@ mpc85xx_exclude_device(u_char bus, u_char devfn)
return PCIBIOS_SUCCESSFUL;
}
+void __init
+mpc85xx_pcibios_fixup(void)
+{
+ struct pci_dev *dev = NULL;
+
+ for_each_pci_dev(dev)
+ pci_read_irq_line(dev);
+}
#endif /* CONFIG_PCI */
void __init mpc85xx_ads_pic_init(void)
{
- struct mpic *mpic1;
- phys_addr_t OpenPIC_PAddr;
-
- /* Determine the Physical Address of the OpenPIC regs */
- OpenPIC_PAddr = get_immrbase() + MPC85xx_OPENPIC_OFFSET;
-
- mpic1 = mpic_alloc(OpenPIC_PAddr,
- MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
- 4, MPC85xx_OPENPIC_IRQ_OFFSET, 0, 250,
- mpc85xx_ads_openpic_initsenses,
- sizeof(mpc85xx_ads_openpic_initsenses),
- " OpenPIC ");
- BUG_ON(mpic1 == NULL);
- mpic_assign_isu(mpic1, 0, OpenPIC_PAddr + 0x10200);
- mpic_assign_isu(mpic1, 1, OpenPIC_PAddr + 0x10280);
- mpic_assign_isu(mpic1, 2, OpenPIC_PAddr + 0x10300);
- mpic_assign_isu(mpic1, 3, OpenPIC_PAddr + 0x10380);
- mpic_assign_isu(mpic1, 4, OpenPIC_PAddr + 0x10400);
- mpic_assign_isu(mpic1, 5, OpenPIC_PAddr + 0x10480);
- mpic_assign_isu(mpic1, 6, OpenPIC_PAddr + 0x10500);
- mpic_assign_isu(mpic1, 7, OpenPIC_PAddr + 0x10580);
-
- /* dummy mappings to get to 48 */
- mpic_assign_isu(mpic1, 8, OpenPIC_PAddr + 0x10600);
- mpic_assign_isu(mpic1, 9, OpenPIC_PAddr + 0x10680);
- mpic_assign_isu(mpic1, 10, OpenPIC_PAddr + 0x10700);
- mpic_assign_isu(mpic1, 11, OpenPIC_PAddr + 0x10780);
-
- /* External ints */
- mpic_assign_isu(mpic1, 12, OpenPIC_PAddr + 0x10000);
- mpic_assign_isu(mpic1, 13, OpenPIC_PAddr + 0x10080);
- mpic_assign_isu(mpic1, 14, OpenPIC_PAddr + 0x10100);
- mpic_init(mpic1);
+ struct mpic *mpic;
+ struct resource r;
+ struct device_node *np = NULL;
+
+ np = of_find_node_by_type(np, "open-pic");
+
+ if (np == NULL) {
+ printk(KERN_ERR "Could not find open-pic node\n");
+ return;
+ }
+
+ if(of_address_to_resource(np, 0, &r)) {
+ printk(KERN_ERR "Could not map mpic register space\n");
+ of_node_put(np);
+ return;
+ }
+
+ mpic = mpic_alloc(np, r.start,
+ MPIC_PRIMARY | MPIC_WANTS_RESET | MPIC_BIG_ENDIAN,
+ 4, 0, " OpenPIC ");
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_assign_isu(mpic, 0, r.start + 0x10200);
+ mpic_assign_isu(mpic, 1, r.start + 0x10280);
+ mpic_assign_isu(mpic, 2, r.start + 0x10300);
+ mpic_assign_isu(mpic, 3, r.start + 0x10380);
+ mpic_assign_isu(mpic, 4, r.start + 0x10400);
+ mpic_assign_isu(mpic, 5, r.start + 0x10480);
+ mpic_assign_isu(mpic, 6, r.start + 0x10500);
+ mpic_assign_isu(mpic, 7, r.start + 0x10580);
+
+ /* Unused on this platform (leave room for 8548) */
+ mpic_assign_isu(mpic, 8, r.start + 0x10600);
+ mpic_assign_isu(mpic, 9, r.start + 0x10680);
+ mpic_assign_isu(mpic, 10, r.start + 0x10700);
+ mpic_assign_isu(mpic, 11, r.start + 0x10780);
+
+ /* External Interrupts */
+ mpic_assign_isu(mpic, 12, r.start + 0x10000);
+ mpic_assign_isu(mpic, 13, r.start + 0x10080);
+ mpic_assign_isu(mpic, 14, r.start + 0x10100);
+
+ mpic_init(mpic);
}
/*
@@ -165,7 +112,9 @@ void __init mpc85xx_ads_pic_init(void)
static void __init mpc85xx_ads_setup_arch(void)
{
struct device_node *cpu;
+#ifdef CONFIG_PCI
struct device_node *np;
+#endif
if (ppc_md.progress)
ppc_md.progress("mpc85xx_ads_setup_arch()", 0);
@@ -186,8 +135,7 @@ static void __init mpc85xx_ads_setup_arch(void)
for (np = NULL; (np = of_find_node_by_type(np, "pci")) != NULL;)
add_bridge(np);
- ppc_md.pci_swizzle = common_swizzle;
- ppc_md.pci_map_irq = mpc85xx_map_irq;
+ ppc_md.pcibios_fixup = mpc85xx_pcibios_fixup;
ppc_md.pci_exclude_device = mpc85xx_exclude_device;
#endif