Merge tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull power management and ACPI updates from Rafael Wysocki:
 "This time the total number of ACPI commits is slightly greater than
  the number of cpufreq commits, but Viresh Kumar (who works on cpufreq)
  remains the most active patch submitter.

  To me, the most significant change is the addition of offline/online
  device operations to the driver core (with the Greg's blessing) and
  the related modifications of the ACPI core hotplug code.  Next are the
  freezer updates from Colin Cross that should make the freezing of
  tasks a bit less heavy weight.

  We also have a couple of regression fixes, a number of fixes for
  issues that have not been identified as regressions, two new drivers
  and a bunch of cleanups all over.

  Highlights:

   - Hotplug changes to support graceful hot-removal failures.

     It sometimes is necessary to fail device hot-removal operations
     gracefully if they cannot be carried out completely.  For example,
     if memory from a memory module being hot-removed has been allocated
     for the kernel's own use and cannot be moved elsewhere, it's
     desirable to fail the hot-removal operation in a graceful way
     rather than to crash the kernel, but currenty a success or a kernel
     crash are the only possible outcomes of an attempted memory
     hot-removal.  Needless to say, that is not a very attractive
     alternative and it had to be addressed.

     However, in order to make it work for memory, I first had to make
     it work for CPUs and for this purpose I needed to modify the ACPI
     processor driver.  It's been split into two parts, a resident one
     handling the low-level initialization/cleanup and a modular one
     playing the actual driver's role (but it binds to the CPU system
     device objects rather than to the ACPI device objects representing
     processors).  That's been sort of like a live brain surgery on a
     patient who's riding a bike.

     So this is a little scary, but since we found and fixed a couple of
     regressions it caused to happen during the early linux-next testing
     (a month ago), nobody has complained.

     As a bonus we remove some duplicated ACPI hotplug code, because the
     ACPI-based CPU hotplug is now going to use the common ACPI hotplug
     code.

   - Lighter weight freezing of tasks.

     These changes from Colin Cross and Mandeep Singh Baines are
     targeted at making the freezing of tasks a bit less heavy weight
     operation.  They reduce the number of tasks woken up every time
     during the freezing, by using the observation that the freezer
     simply doesn't need to wake up some of them and wait for them all
     to call refrigerator().  The time needed for the freezer to decide
     to report a failure is reduced too.

     Also reintroduced is the check causing a lockdep warining to
     trigger when try_to_freeze() is called with locks held (which is
     generally unsafe and shouldn't happen).

   - cpufreq updates

     First off, a commit from Srivatsa S Bhat fixes a resume regression
     introduced during the 3.10 cycle causing some cpufreq sysfs
     attributes to return wrong values to user space after resume.  The
     fix is kind of fresh, but also it's pretty obvious once Srivatsa
     has identified the root cause.

     Second, we have a new freqdomain_cpus sysfs attribute for the
     acpi-cpufreq driver to provide information previously available via
     related_cpus.  From Lan Tianyu.

     Finally, we fix a number of issues, mostly related to the
     CPUFREQ_POSTCHANGE notifier and cpufreq Kconfig options and clean
     up some code.  The majority of changes from Viresh Kumar with bits
     from Jacob Shin, Heiko Stübner, Xiaoguang Chen, Ezequiel Garcia,
     Arnd Bergmann, and Tang Yuantian.

   - ACPICA update

     A usual bunch of updates from the ACPICA upstream.

     During the 3.4 cycle we introduced support for ACPI 5 extended
     sleep registers, but they are only supposed to be used if the
     HW-reduced mode bit is set in the FADT flags and the code attempted
     to use them without checking that bit.  That caused suspend/resume
     regressions to happen on some systems.  Fix from Lv Zheng causes
     those registers to be used only if the HW-reduced mode bit is set.

     Apart from this some other ACPICA bugs are fixed and code cleanups
     are made by Bob Moore, Tomasz Nowicki, Lv Zheng, Chao Guan, and
     Zhang Rui.

   - cpuidle updates

     New driver for Xilinx Zynq processors is added by Michal Simek.

     Multidriver support simplification, addition of some missing
     kerneldoc comments and Kconfig-related fixes come from Daniel
     Lezcano.

   - ACPI power management updates

     Changes to make suspend/resume work correctly in Xen guests from
     Konrad Rzeszutek Wilk, sparse warning fix from Fengguang Wu and
     cleanups and fixes of the ACPI device power state selection
     routine.

   - ACPI documentation updates

     Some previously missing pieces of ACPI documentation are added by
     Lv Zheng and Aaron Lu (hopefully, that will help people to
     uderstand how the ACPI subsystem works) and one outdated doc is
     updated by Hanjun Guo.

   - Assorted ACPI updates

     We finally nailed down the IA-64 issue that was the reason for
     reverting commit 9f29ab11ddbf ("ACPI / scan: do not match drivers
     against objects having scan handlers"), so we can fix it and move
     the ACPI scan handler check added to the ACPI video driver back to
     the core.

     A mechanism for adding CMOS RTC address space handlers is
     introduced by Lan Tianyu to allow some EC-related breakage to be
     fixed on some systems.

     A spec-compliant implementation of acpi_os_get_timer() is added by
     Mika Westerberg.

     The evaluation of _STA is added to do_acpi_find_child() to avoid
     situations in which a pointer to a disabled device object is
     returned instead of an enabled one with the same _ADR value.  From
     Jeff Wu.

     Intel BayTrail PCH (Platform Controller Hub) support is added to
     the ACPI driver for Intel Low-Power Subsystems (LPSS) and that
     driver is modified to work around a couple of known BIOS issues.
     Changes from Mika Westerberg and Heikki Krogerus.

     The EC driver is fixed by Vasiliy Kulikov to use get_user() and
     put_user() instead of dereferencing user space pointers blindly.

     Code cleanups are made by Bjorn Helgaas, Nicholas Mazzuca and Toshi
     Kani.

   - Assorted power management updates

     The "runtime idle" helper routine is changed to take the return
     values of the callbacks executed by it into account and to call
     rpm_suspend() if they return 0, which allows us to reduce the
     overall code bloat a bit (by dropping some code that's not
     necessary any more after that modification).

     The runtime PM documentation is updated by Alan Stern (to reflect
     the "runtime idle" behavior change).

     New trace points for PM QoS are added by Sahara
     (<keun-o.park@windriver.com>).

     PM QoS documentation is updated by Lan Tianyu.

     Code cleanups are made and minor issues are addressed by Bernie
     Thompson, Bjorn Helgaas, Julius Werner, and Shuah Khan.

   - devfreq updates

     New driver for the Exynos5-bus device from Abhilash Kesavan.

     Minor cleanups, fixes and MAINTAINERS update from MyungJoo Ham,
     Abhilash Kesavan, Paul Bolle, Rajagopal Venkat, and Wei Yongjun.

   - OMAP power management updates

     Adaptive Voltage Scaling (AVS) SmartReflex voltage control driver
     updates from Andrii Tseglytskyi and Nishanth Menon."

* tag 'pm+acpi-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (162 commits)
  cpufreq: Fix cpufreq regression after suspend/resume
  ACPI / PM: Fix possible NULL pointer deref in acpi_pm_device_sleep_state()
  PM / Sleep: Warn about system time after resume with pm_trace
  cpufreq: don't leave stale policy pointer in cdbs->cur_policy
  acpi-cpufreq: Add new sysfs attribute freqdomain_cpus
  cpufreq: make sure frequency transitions are serialized
  ACPI: implement acpi_os_get_timer() according the spec
  ACPI / EC: Add HP Folio 13 to ec_dmi_table in order to skip DSDT scan
  ACPI: Add CMOS RTC Operation Region handler support
  ACPI / processor: Drop unused variable from processor_perflib.c
  cpufreq: tegra: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: s3c64xx: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: omap: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: imx6q: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: exynos: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: dbx500: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: davinci: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: arm-big-little: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: powernow-k8: call CPUFREQ_POSTCHANGE notfier in error cases
  cpufreq: pcc: call CPUFREQ_POSTCHANGE notfier in error cases
  ...

6 files changed, 0 insertions, 1831 deletions

diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index b62aab3..e17cdfc 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -193,37 +193,6 @@ config PPC_IO_WORKAROUNDS
 
 source "drivers/cpufreq/Kconfig"
 
-menu "CPU Frequency drivers"
-	depends on CPU_FREQ
-
-config CPU_FREQ_PMAC
-	bool "Support for Apple PowerBooks"
-	depends on ADB_PMU && PPC32
-	select CPU_FREQ_TABLE
-	help
-	  This adds support for frequency switching on Apple PowerBooks,
-	  this currently includes some models of iBook & Titanium
-	  PowerBook.
-
-config CPU_FREQ_PMAC64
-	bool "Support for some Apple G5s"
-	depends on PPC_PMAC && PPC64
-	select CPU_FREQ_TABLE
-	help
-	  This adds support for frequency switching on Apple iMac G5,
-	  and some of the more recent desktop G5 machines as well.
-
-config PPC_PASEMI_CPUFREQ
-	bool "Support for PA Semi PWRficient"
-	depends on PPC_PASEMI
-	default y
-	select CPU_FREQ_TABLE
-	help
-	  This adds the support for frequency switching on PA Semi
-	  PWRficient processors.
-
-endmenu
-
 menu "CPUIdle driver"
 
 source "drivers/cpuidle/Kconfig"
diff --git a/arch/powerpc/platforms/pasemi/Makefile b/arch/powerpc/platforms/pasemi/Makefile
index ce6d789..8e8d4ca 100644
--- a/arch/powerpc/platforms/pasemi/Makefile
+++ b/arch/powerpc/platforms/pasemi/Makefile
@@ -1,3 +1,2 @@
 obj-y	+= setup.o pci.o time.o idle.o powersave.o iommu.o dma_lib.o misc.o
 obj-$(CONFIG_PPC_PASEMI_MDIO)	+= gpio_mdio.o
-obj-$(CONFIG_PPC_PASEMI_CPUFREQ) += cpufreq.o
diff --git a/arch/powerpc/platforms/pasemi/cpufreq.c b/arch/powerpc/platforms/pasemi/cpufreq.c
deleted file mode 100644
index be1e795..0000000
--- a/arch/powerpc/platforms/pasemi/cpufreq.c
+++ /dev/null
@@ -1,330 +0,0 @@
-/*
- * Copyright (C) 2007 PA Semi, Inc
- *
- * Authors: Egor Martovetsky <egor@pasemi.com>
- *	    Olof Johansson <olof@lixom.net>
- *
- * Maintained by: Olof Johansson <olof@lixom.net>
- *
- * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c:
- * (C) Copyright IBM Deutschland Entwicklung GmbH 2005
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <linux/cpufreq.h>
-#include <linux/timer.h>
-#include <linux/module.h>
-
-#include <asm/hw_irq.h>
-#include <asm/io.h>
-#include <asm/prom.h>
-#include <asm/time.h>
-#include <asm/smp.h>
-
-#define SDCASR_REG		0x0100
-#define SDCASR_REG_STRIDE	0x1000
-#define SDCPWR_CFGA0_REG	0x0100
-#define SDCPWR_PWST0_REG	0x0000
-#define SDCPWR_GIZTIME_REG	0x0440
-
-/* SDCPWR_GIZTIME_REG fields */
-#define SDCPWR_GIZTIME_GR	0x80000000
-#define SDCPWR_GIZTIME_LONGLOCK	0x000000ff
-
-/* Offset of ASR registers from SDC base */
-#define SDCASR_OFFSET		0x120000
-
-static void __iomem *sdcpwr_mapbase;
-static void __iomem *sdcasr_mapbase;
-
-static DEFINE_MUTEX(pas_switch_mutex);
-
-/* Current astate, is used when waking up from power savings on
- * one core, in case the other core has switched states during
- * the idle time.
- */
-static int current_astate;
-
-/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */
-static struct cpufreq_frequency_table pas_freqs[] = {
-	{0,	0},
-	{1,	0},
-	{2,	0},
-	{3,	0},
-	{4,	0},
-	{0,	CPUFREQ_TABLE_END},
-};
-
-static struct freq_attr *pas_cpu_freqs_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-/*
- * hardware specific functions
- */
-
-static int get_astate_freq(int astate)
-{
-	u32 ret;
-	ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10));
-
-	return ret & 0x3f;
-}
-
-static int get_cur_astate(int cpu)
-{
-	u32 ret;
-
-	ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG);
-	ret = (ret >> (cpu * 4)) & 0x7;
-
-	return ret;
-}
-
-static int get_gizmo_latency(void)
-{
-	u32 giztime, ret;
-
-	giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG);
-
-	/* just provide the upper bound */
-	if (giztime & SDCPWR_GIZTIME_GR)
-		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000;
-	else
-		ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000;
-
-	return ret;
-}
-
-static void set_astate(int cpu, unsigned int astate)
-{
-	unsigned long flags;
-
-	/* Return if called before init has run */
-	if (unlikely(!sdcasr_mapbase))
-		return;
-
-	local_irq_save(flags);
-
-	out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate);
-
-	local_irq_restore(flags);
-}
-
-int check_astate(void)
-{
-	return get_cur_astate(hard_smp_processor_id());
-}
-
-void restore_astate(int cpu)
-{
-	set_astate(cpu, current_astate);
-}
-
-/*
- * cpufreq functions
- */
-
-static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	const u32 *max_freqp;
-	u32 max_freq;
-	int i, cur_astate;
-	struct resource res;
-	struct device_node *cpu, *dn;
-	int err = -ENODEV;
-
-	cpu = of_get_cpu_node(policy->cpu, NULL);
-
-	if (!cpu)
-		goto out;
-
-	dn = of_find_compatible_node(NULL, NULL, "1682m-sdc");
-	if (!dn)
-		dn = of_find_compatible_node(NULL, NULL,
-					     "pasemi,pwrficient-sdc");
-	if (!dn)
-		goto out;
-	err = of_address_to_resource(dn, 0, &res);
-	of_node_put(dn);
-	if (err)
-		goto out;
-	sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000);
-	if (!sdcasr_mapbase) {
-		err = -EINVAL;
-		goto out;
-	}
-
-	dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo");
-	if (!dn)
-		dn = of_find_compatible_node(NULL, NULL,
-					     "pasemi,pwrficient-gizmo");
-	if (!dn) {
-		err = -ENODEV;
-		goto out_unmap_sdcasr;
-	}
-	err = of_address_to_resource(dn, 0, &res);
-	of_node_put(dn);
-	if (err)
-		goto out_unmap_sdcasr;
-	sdcpwr_mapbase = ioremap(res.start, 0x1000);
-	if (!sdcpwr_mapbase) {
-		err = -EINVAL;
-		goto out_unmap_sdcasr;
-	}
-
-	pr_debug("init cpufreq on CPU %d\n", policy->cpu);
-
-	max_freqp = of_get_property(cpu, "clock-frequency", NULL);
-	if (!max_freqp) {
-		err = -EINVAL;
-		goto out_unmap_sdcpwr;
-	}
-
-	/* we need the freq in kHz */
-	max_freq = *max_freqp / 1000;
-
-	pr_debug("max clock-frequency is at %u kHz\n", max_freq);
-	pr_debug("initializing frequency table\n");
-
-	/* initialize frequency table */
-	for (i=0; pas_freqs[i].frequency!=CPUFREQ_TABLE_END; i++) {
-		pas_freqs[i].frequency = get_astate_freq(pas_freqs[i].index) * 100000;
-		pr_debug("%d: %d\n", i, pas_freqs[i].frequency);
-	}
-
-	policy->cpuinfo.transition_latency = get_gizmo_latency();
-
-	cur_astate = get_cur_astate(policy->cpu);
-	pr_debug("current astate is at %d\n",cur_astate);
-
-	policy->cur = pas_freqs[cur_astate].frequency;
-	cpumask_copy(policy->cpus, cpu_online_mask);
-
-	ppc_proc_freq = policy->cur * 1000ul;
-
-	cpufreq_frequency_table_get_attr(pas_freqs, policy->cpu);
-
-	/* this ensures that policy->cpuinfo_min and policy->cpuinfo_max
-	 * are set correctly
-	 */
-	return cpufreq_frequency_table_cpuinfo(policy, pas_freqs);
-
-out_unmap_sdcpwr:
-	iounmap(sdcpwr_mapbase);
-
-out_unmap_sdcasr:
-	iounmap(sdcasr_mapbase);
-out:
-	return err;
-}
-
-static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy)
-{
-	/*
-	 * We don't support CPU hotplug. Don't unmap after the system
-	 * has already made it to a running state.
-	 */
-	if (system_state != SYSTEM_BOOTING)
-		return 0;
-
-	if (sdcasr_mapbase)
-		iounmap(sdcasr_mapbase);
-	if (sdcpwr_mapbase)
-		iounmap(sdcpwr_mapbase);
-
-	cpufreq_frequency_table_put_attr(policy->cpu);
-	return 0;
-}
-
-static int pas_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, pas_freqs);
-}
-
-static int pas_cpufreq_target(struct cpufreq_policy *policy,
-			      unsigned int target_freq,
-			      unsigned int relation)
-{
-	struct cpufreq_freqs freqs;
-	int pas_astate_new;
-	int i;
-
-	cpufreq_frequency_table_target(policy,
-				       pas_freqs,
-				       target_freq,
-				       relation,
-				       &pas_astate_new);
-
-	freqs.old = policy->cur;
-	freqs.new = pas_freqs[pas_astate_new].frequency;
-
-	mutex_lock(&pas_switch_mutex);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-
-	pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n",
-		 policy->cpu,
-		 pas_freqs[pas_astate_new].frequency,
-		 pas_freqs[pas_astate_new].index);
-
-	current_astate = pas_astate_new;
-
-	for_each_online_cpu(i)
-		set_astate(i, pas_astate_new);
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	mutex_unlock(&pas_switch_mutex);
-
-	ppc_proc_freq = freqs.new * 1000ul;
-	return 0;
-}
-
-static struct cpufreq_driver pas_cpufreq_driver = {
-	.name		= "pas-cpufreq",
-	.owner		= THIS_MODULE,
-	.flags		= CPUFREQ_CONST_LOOPS,
-	.init		= pas_cpufreq_cpu_init,
-	.exit		= pas_cpufreq_cpu_exit,
-	.verify		= pas_cpufreq_verify,
-	.target		= pas_cpufreq_target,
-	.attr		= pas_cpu_freqs_attr,
-};
-
-/*
- * module init and destoy
- */
-
-static int __init pas_cpufreq_init(void)
-{
-	if (!of_machine_is_compatible("PA6T-1682M") &&
-	    !of_machine_is_compatible("pasemi,pwrficient"))
-		return -ENODEV;
-
-	return cpufreq_register_driver(&pas_cpufreq_driver);
-}
-
-static void __exit pas_cpufreq_exit(void)
-{
-	cpufreq_unregister_driver(&pas_cpufreq_driver);
-}
-
-module_init(pas_cpufreq_init);
-module_exit(pas_cpufreq_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>, Olof Johansson <olof@lixom.net>");
diff --git a/arch/powerpc/platforms/powermac/Makefile b/arch/powerpc/platforms/powermac/Makefile
index ea47df6..52c6ce1 100644
--- a/arch/powerpc/platforms/powermac/Makefile
+++ b/arch/powerpc/platforms/powermac/Makefile
@@ -9,8 +9,6 @@ obj-y				+= pic.o setup.o time.o feature.o pci.o \
 				   sleep.o low_i2c.o cache.o pfunc_core.o \
 				   pfunc_base.o udbg_scc.o udbg_adb.o
 obj-$(CONFIG_PMAC_BACKLIGHT)	+= backlight.o
-obj-$(CONFIG_CPU_FREQ_PMAC)	+= cpufreq_32.o
-obj-$(CONFIG_CPU_FREQ_PMAC64)	+= cpufreq_64.o
 # CONFIG_NVRAM is an arch. independent tristate symbol, for pmac32 we really
 # need this to be a bool.  Cheat here and pretend CONFIG_NVRAM=m is really
 # CONFIG_NVRAM=y
diff --git a/arch/powerpc/platforms/powermac/cpufreq_32.c b/arch/powerpc/platforms/powermac/cpufreq_32.c
deleted file mode 100644
index 3104fad..0000000
--- a/arch/powerpc/platforms/powermac/cpufreq_32.c
+++ /dev/null
@@ -1,721 +0,0 @@
-/*
- *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *  Copyright (C) 2004        John Steele Scott <toojays@toojays.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * TODO: Need a big cleanup here. Basically, we need to have different
- * cpufreq_driver structures for the different type of HW instead of the
- * current mess. We also need to better deal with the detection of the
- * type of machine.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/adb.h>
-#include <linux/pmu.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/hardirq.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/irq.h>
-#include <asm/pmac_feature.h>
-#include <asm/mmu_context.h>
-#include <asm/sections.h>
-#include <asm/cputable.h>
-#include <asm/time.h>
-#include <asm/mpic.h>
-#include <asm/keylargo.h>
-#include <asm/switch_to.h>
-
-/* WARNING !!! This will cause calibrate_delay() to be called,
- * but this is an __init function ! So you MUST go edit
- * init/main.c to make it non-init before enabling DEBUG_FREQ
- */
-#undef DEBUG_FREQ
-
-extern void low_choose_7447a_dfs(int dfs);
-extern void low_choose_750fx_pll(int pll);
-extern void low_sleep_handler(void);
-
-/*
- * Currently, PowerMac cpufreq supports only high & low frequencies
- * that are set by the firmware
- */
-static unsigned int low_freq;
-static unsigned int hi_freq;
-static unsigned int cur_freq;
-static unsigned int sleep_freq;
-static unsigned long transition_latency;
-
-/*
- * Different models uses different mechanisms to switch the frequency
- */
-static int (*set_speed_proc)(int low_speed);
-static unsigned int (*get_speed_proc)(void);
-
-/*
- * Some definitions used by the various speedprocs
- */
-static u32 voltage_gpio;
-static u32 frequency_gpio;
-static u32 slew_done_gpio;
-static int no_schedule;
-static int has_cpu_l2lve;
-static int is_pmu_based;
-
-/* There are only two frequency states for each processor. Values
- * are in kHz for the time being.
- */
-#define CPUFREQ_HIGH                  0
-#define CPUFREQ_LOW                   1
-
-static struct cpufreq_frequency_table pmac_cpu_freqs[] = {
-	{CPUFREQ_HIGH, 		0},
-	{CPUFREQ_LOW,		0},
-	{0,			CPUFREQ_TABLE_END},
-};
-
-static struct freq_attr* pmac_cpu_freqs_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-static inline void local_delay(unsigned long ms)
-{
-	if (no_schedule)
-		mdelay(ms);
-	else
-		msleep(ms);
-}
-
-#ifdef DEBUG_FREQ
-static inline void debug_calc_bogomips(void)
-{
-	/* This will cause a recalc of bogomips and display the
-	 * result. We backup/restore the value to avoid affecting the
-	 * core cpufreq framework's own calculation.
-	 */
-	unsigned long save_lpj = loops_per_jiffy;
-	calibrate_delay();
-	loops_per_jiffy = save_lpj;
-}
-#endif /* DEBUG_FREQ */
-
-/* Switch CPU speed under 750FX CPU control
- */
-static int cpu_750fx_cpu_speed(int low_speed)
-{
-	u32 hid2;
-
-	if (low_speed == 0) {
-		/* ramping up, set voltage first */
-		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
-		/* Make sure we sleep for at least 1ms */
-		local_delay(10);
-
-		/* tweak L2 for high voltage */
-		if (has_cpu_l2lve) {
-			hid2 = mfspr(SPRN_HID2);
-			hid2 &= ~0x2000;
-			mtspr(SPRN_HID2, hid2);
-		}
-	}
-#ifdef CONFIG_6xx
-	low_choose_750fx_pll(low_speed);
-#endif
-	if (low_speed == 1) {
-		/* tweak L2 for low voltage */
-		if (has_cpu_l2lve) {
-			hid2 = mfspr(SPRN_HID2);
-			hid2 |= 0x2000;
-			mtspr(SPRN_HID2, hid2);
-		}
-
-		/* ramping down, set voltage last */
-		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
-		local_delay(10);
-	}
-
-	return 0;
-}
-
-static unsigned int cpu_750fx_get_cpu_speed(void)
-{
-	if (mfspr(SPRN_HID1) & HID1_PS)
-		return low_freq;
-	else
-		return hi_freq;
-}
-
-/* Switch CPU speed using DFS */
-static int dfs_set_cpu_speed(int low_speed)
-{
-	if (low_speed == 0) {
-		/* ramping up, set voltage first */
-		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
-		/* Make sure we sleep for at least 1ms */
-		local_delay(1);
-	}
-
-	/* set frequency */
-#ifdef CONFIG_6xx
-	low_choose_7447a_dfs(low_speed);
-#endif
-	udelay(100);
-
-	if (low_speed == 1) {
-		/* ramping down, set voltage last */
-		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
-		local_delay(1);
-	}
-
-	return 0;
-}
-
-static unsigned int dfs_get_cpu_speed(void)
-{
-	if (mfspr(SPRN_HID1) & HID1_DFS)
-		return low_freq;
-	else
-		return hi_freq;
-}
-
-
-/* Switch CPU speed using slewing GPIOs
- */
-static int gpios_set_cpu_speed(int low_speed)
-{
-	int gpio, timeout = 0;
-
-	/* If ramping up, set voltage first */
-	if (low_speed == 0) {
-		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05);
-		/* Delay is way too big but it's ok, we schedule */
-		local_delay(10);
-	}
-
-	/* Set frequency */
-	gpio = 	pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
-	if (low_speed == ((gpio & 0x01) == 0))
-		goto skip;
-
-	pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio,
-			  low_speed ? 0x04 : 0x05);
-	udelay(200);
-	do {
-		if (++timeout > 100)
-			break;
-		local_delay(1);
-		gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0);
-	} while((gpio & 0x02) == 0);
- skip:
-	/* If ramping down, set voltage last */
-	if (low_speed == 1) {
-		pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04);
-		/* Delay is way too big but it's ok, we schedule */
-		local_delay(10);
-	}
-
-#ifdef DEBUG_FREQ
-	debug_calc_bogomips();
-#endif
-
-	return 0;
-}
-
-/* Switch CPU speed under PMU control
- */
-static int pmu_set_cpu_speed(int low_speed)
-{
-	struct adb_request req;
-	unsigned long save_l2cr;
-	unsigned long save_l3cr;
-	unsigned int pic_prio;
-	unsigned long flags;
-
-	preempt_disable();
-
-#ifdef DEBUG_FREQ
-	printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
-#endif
-	pmu_suspend();
-
-	/* Disable all interrupt sources on openpic */
- 	pic_prio = mpic_cpu_get_priority();
-	mpic_cpu_set_priority(0xf);
-
-	/* Make sure the decrementer won't interrupt us */
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-	/* Make sure any pending DEC interrupt occurring while we did
-	 * the above didn't re-enable the DEC */
-	mb();
-	asm volatile("mtdec %0" : : "r" (0x7fffffff));
-
-	/* We can now disable MSR_EE */
-	local_irq_save(flags);
-
-	/* Giveup the FPU & vec */
-	enable_kernel_fp();
-
-#ifdef CONFIG_ALTIVEC
-	if (cpu_has_feature(CPU_FTR_ALTIVEC))
-		enable_kernel_altivec();
-#endif /* CONFIG_ALTIVEC */
-
-	/* Save & disable L2 and L3 caches */
-	save_l3cr = _get_L3CR();	/* (returns -1 if not available) */
-	save_l2cr = _get_L2CR();	/* (returns -1 if not available) */
-
-	/* Send the new speed command. My assumption is that this command
-	 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep
-	 */
-	pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed);
-	while (!req.complete)
-		pmu_poll();
-
-	/* Prepare the northbridge for the speed transition */
-	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1);
-
-	/* Call low level code to backup CPU state and recover from
-	 * hardware reset
-	 */
-	low_sleep_handler();
-
-	/* Restore the northbridge */
-	pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0);
-
-	/* Restore L2 cache */
-	if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0)
- 		_set_L2CR(save_l2cr);
-	/* Restore L3 cache */
-	if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0)
- 		_set_L3CR(save_l3cr);
-
-	/* Restore userland MMU context */
-	switch_mmu_context(NULL, current->active_mm);
-
-#ifdef DEBUG_FREQ
-	printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
-#endif
-
-	/* Restore low level PMU operations */
-	pmu_unlock();
-
-	/*
-	 * Restore decrementer; we'll take a decrementer interrupt
-	 * as soon as interrupts are re-enabled and the generic
-	 * clockevents code will reprogram it with the right value.
-	 */
-	set_dec(1);
-
-	/* Restore interrupts */
- 	mpic_cpu_set_priority(pic_prio);
-
-	/* Let interrupts flow again ... */
-	local_irq_restore(flags);
-
-#ifdef DEBUG_FREQ
-	debug_calc_bogomips();
-#endif
-
-	pmu_resume();
-
-	preempt_enable();
-
-	return 0;
-}
-
-static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode,
-		int notify)
-{
-	struct cpufreq_freqs freqs;
-	unsigned long l3cr;
-	static unsigned long prev_l3cr;
-
-	freqs.old = cur_freq;
-	freqs.new = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
-
-	if (freqs.old == freqs.new)
-		return 0;
-
-	if (notify)
-		cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-	if (speed_mode == CPUFREQ_LOW &&
-	    cpu_has_feature(CPU_FTR_L3CR)) {
-		l3cr = _get_L3CR();
-		if (l3cr & L3CR_L3E) {
-			prev_l3cr = l3cr;
-			_set_L3CR(0);
-		}
-	}
-	set_speed_proc(speed_mode == CPUFREQ_LOW);
-	if (speed_mode == CPUFREQ_HIGH &&
-	    cpu_has_feature(CPU_FTR_L3CR)) {
-		l3cr = _get_L3CR();
-		if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr)
-			_set_L3CR(prev_l3cr);
-	}
-	if (notify)
-		cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-	cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq;
-
-	return 0;
-}
-
-static unsigned int pmac_cpufreq_get_speed(unsigned int cpu)
-{
-	return cur_freq;
-}
-
-static int pmac_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, pmac_cpu_freqs);
-}
-
-static int pmac_cpufreq_target(	struct cpufreq_policy *policy,
-					unsigned int target_freq,
-					unsigned int relation)
-{
-	unsigned int    newstate = 0;
-	int		rc;
-
-	if (cpufreq_frequency_table_target(policy, pmac_cpu_freqs,
-			target_freq, relation, &newstate))
-		return -EINVAL;
-
-	rc = do_set_cpu_speed(policy, newstate, 1);
-
-	ppc_proc_freq = cur_freq * 1000ul;
-	return rc;
-}
-
-static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	if (policy->cpu != 0)
-		return -ENODEV;
-
-	policy->cpuinfo.transition_latency	= transition_latency;
-	policy->cur = cur_freq;
-
-	cpufreq_frequency_table_get_attr(pmac_cpu_freqs, policy->cpu);
-	return cpufreq_frequency_table_cpuinfo(policy, pmac_cpu_freqs);
-}
-
-static u32 read_gpio(struct device_node *np)
-{
-	const u32 *reg = of_get_property(np, "reg", NULL);
-	u32 offset;
-
-	if (reg == NULL)
-		return 0;
-	/* That works for all keylargos but shall be fixed properly
-	 * some day... The problem is that it seems we can't rely
-	 * on the "reg" property of the GPIO nodes, they are either
-	 * relative to the base of KeyLargo or to the base of the
-	 * GPIO space, and the device-tree doesn't help.
-	 */
-	offset = *reg;
-	if (offset < KEYLARGO_GPIO_LEVELS0)
-		offset += KEYLARGO_GPIO_LEVELS0;
-	return offset;
-}
-
-static int pmac_cpufreq_suspend(struct cpufreq_policy *policy)
-{
-	/* Ok, this could be made a bit smarter, but let's be robust for now. We
-	 * always force a speed change to high speed before sleep, to make sure
-	 * we have appropriate voltage and/or bus speed for the wakeup process,
-	 * and to make sure our loops_per_jiffies are "good enough", that is will
-	 * not cause too short delays if we sleep in low speed and wake in high
-	 * speed..
-	 */
-	no_schedule = 1;
-	sleep_freq = cur_freq;
-	if (cur_freq == low_freq && !is_pmu_based)
-		do_set_cpu_speed(policy, CPUFREQ_HIGH, 0);
-	return 0;
-}
-
-static int pmac_cpufreq_resume(struct cpufreq_policy *policy)
-{
-	/* If we resume, first check if we have a get() function */
-	if (get_speed_proc)
-		cur_freq = get_speed_proc();
-	else
-		cur_freq = 0;
-
-	/* We don't, hrm... we don't really know our speed here, best
-	 * is that we force a switch to whatever it was, which is
-	 * probably high speed due to our suspend() routine
-	 */
-	do_set_cpu_speed(policy, sleep_freq == low_freq ?
-			 CPUFREQ_LOW : CPUFREQ_HIGH, 0);
-
-	ppc_proc_freq = cur_freq * 1000ul;
-
-	no_schedule = 0;
-	return 0;
-}
-
-static struct cpufreq_driver pmac_cpufreq_driver = {
-	.verify 	= pmac_cpufreq_verify,
-	.target 	= pmac_cpufreq_target,
-	.get		= pmac_cpufreq_get_speed,
-	.init		= pmac_cpufreq_cpu_init,
-	.suspend	= pmac_cpufreq_suspend,
-	.resume		= pmac_cpufreq_resume,
-	.flags		= CPUFREQ_PM_NO_WARN,
-	.attr		= pmac_cpu_freqs_attr,
-	.name		= "powermac",
-	.owner		= THIS_MODULE,
-};
-
-
-static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
-{
-	struct device_node *volt_gpio_np = of_find_node_by_name(NULL,
-								"voltage-gpio");
-	struct device_node *freq_gpio_np = of_find_node_by_name(NULL,
-								"frequency-gpio");
-	struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL,
-								     "slewing-done");
-	const u32 *value;
-
-	/*
-	 * Check to see if it's GPIO driven or PMU only
-	 *
-	 * The way we extract the GPIO address is slightly hackish, but it
-	 * works well enough for now. We need to abstract the whole GPIO
-	 * stuff sooner or later anyway
-	 */
-
-	if (volt_gpio_np)
-		voltage_gpio = read_gpio(volt_gpio_np);
-	if (freq_gpio_np)
-		frequency_gpio = read_gpio(freq_gpio_np);
-	if (slew_done_gpio_np)
-		slew_done_gpio = read_gpio(slew_done_gpio_np);
-
-	/* If we use the frequency GPIOs, calculate the min/max speeds based
-	 * on the bus frequencies
-	 */
-	if (frequency_gpio && slew_done_gpio) {
-		int lenp, rc;
-		const u32 *freqs, *ratio;
-
-		freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
-		lenp /= sizeof(u32);
-		if (freqs == NULL || lenp != 2) {
-			printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
-			return 1;
-		}
-		ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
-						NULL);
-		if (ratio == NULL) {
-			printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
-			return 1;
-		}
-
-		/* Get the min/max bus frequencies */
-		low_freq = min(freqs[0], freqs[1]);
-		hi_freq = max(freqs[0], freqs[1]);
-
-		/* Grrrr.. It _seems_ that the device-tree is lying on the low bus
-		 * frequency, it claims it to be around 84Mhz on some models while
-		 * it appears to be approx. 101Mhz on all. Let's hack around here...
-		 * fortunately, we don't need to be too precise
-		 */
-		if (low_freq < 98000000)
-			low_freq = 101000000;
-
-		/* Convert those to CPU core clocks */
-		low_freq = (low_freq * (*ratio)) / 2000;
-		hi_freq = (hi_freq * (*ratio)) / 2000;
-
-		/* Now we get the frequencies, we read the GPIO to see what is out current
-		 * speed
-		 */
-		rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0);
-		cur_freq = (rc & 0x01) ? hi_freq : low_freq;
-
-		set_speed_proc = gpios_set_cpu_speed;
-		return 1;
-	}
-
-	/* If we use the PMU, look for the min & max frequencies in the
-	 * device-tree
-	 */
-	value = of_get_property(cpunode, "min-clock-frequency", NULL);
-	if (!value)
-		return 1;
-	low_freq = (*value) / 1000;
-	/* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree
-	 * here */
-	if (low_freq < 100000)
-		low_freq *= 10;
-
-	value = of_get_property(cpunode, "max-clock-frequency", NULL);
-	if (!value)
-		return 1;
-	hi_freq = (*value) / 1000;
-	set_speed_proc = pmu_set_cpu_speed;
-	is_pmu_based = 1;
-
-	return 0;
-}
-
-static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
-{
-	struct device_node *volt_gpio_np;
-
-	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
-		return 1;
-
-	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
-	if (volt_gpio_np)
-		voltage_gpio = read_gpio(volt_gpio_np);
-	if (!voltage_gpio){
-		printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
-		return 1;
-	}
-
-	/* OF only reports the high frequency */
-	hi_freq = cur_freq;
-	low_freq = cur_freq/2;
-
-	/* Read actual frequency from CPU */
-	cur_freq = dfs_get_cpu_speed();
-	set_speed_proc = dfs_set_cpu_speed;
-	get_speed_proc = dfs_get_cpu_speed;
-
-	return 0;
-}
-
-static int pmac_cpufreq_init_750FX(struct device_node *cpunode)
-{
-	struct device_node *volt_gpio_np;
-	u32 pvr;
-	const u32 *value;
-
-	if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL)
-		return 1;
-
-	hi_freq = cur_freq;
-	value = of_get_property(cpunode, "reduced-clock-frequency", NULL);
-	if (!value)
-		return 1;
-	low_freq = (*value) / 1000;
-
-	volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select");
-	if (volt_gpio_np)
-		voltage_gpio = read_gpio(volt_gpio_np);
-
-	pvr = mfspr(SPRN_PVR);
-	has_cpu_l2lve = !((pvr & 0xf00) == 0x100);
-
-	set_speed_proc = cpu_750fx_cpu_speed;
-	get_speed_proc = cpu_750fx_get_cpu_speed;
-	cur_freq = cpu_750fx_get_cpu_speed();
-
-	return 0;
-}
-
-/* Currently, we support the following machines:
- *
- *  - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz)
- *  - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz)
- *  - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz)
- *  - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz)
- *  - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz)
- *  - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage)
- *  - Recent MacRISC3 laptops
- *  - All new machines with 7447A CPUs
- */
-static int __init pmac_cpufreq_setup(void)
-{
-	struct device_node	*cpunode;
-	const u32		*value;
-
-	if (strstr(cmd_line, "nocpufreq"))
-		return 0;
-
-	/* Assume only one CPU */
-	cpunode = of_find_node_by_type(NULL, "cpu");
-	if (!cpunode)
-		goto out;
-
-	/* Get current cpu clock freq */
-	value = of_get_property(cpunode, "clock-frequency", NULL);
-	if (!value)
-		goto out;
-	cur_freq = (*value) / 1000;
-	transition_latency = CPUFREQ_ETERNAL;
-
-	/*  Check for 7447A based MacRISC3 */
-	if (of_machine_is_compatible("MacRISC3") &&
-	    of_get_property(cpunode, "dynamic-power-step", NULL) &&
-	    PVR_VER(mfspr(SPRN_PVR)) == 0x8003) {
-		pmac_cpufreq_init_7447A(cpunode);
-		transition_latency = 8000000;
-	/* Check for other MacRISC3 machines */
-	} else if (of_machine_is_compatible("PowerBook3,4") ||
-		   of_machine_is_compatible("PowerBook3,5") ||
-		   of_machine_is_compatible("MacRISC3")) {
-		pmac_cpufreq_init_MacRISC3(cpunode);
-	/* Else check for iBook2 500/600 */
-	} else if (of_machine_is_compatible("PowerBook4,1")) {
-		hi_freq = cur_freq;
-		low_freq = 400000;
-		set_speed_proc = pmu_set_cpu_speed;
-		is_pmu_based = 1;
-	}
-	/* Else check for TiPb 550 */
-	else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) {
-		hi_freq = cur_freq;
-		low_freq = 500000;
-		set_speed_proc = pmu_set_cpu_speed;
-		is_pmu_based = 1;
-	}
-	/* Else check for TiPb 400 & 500 */
-	else if (of_machine_is_compatible("PowerBook3,2")) {
-		/* We only know about the 400 MHz and the 500Mhz model
-		 * they both have 300 MHz as low frequency
-		 */
-		if (cur_freq < 350000 || cur_freq > 550000)
-			goto out;
-		hi_freq = cur_freq;
-		low_freq = 300000;
-		set_speed_proc = pmu_set_cpu_speed;
-		is_pmu_based = 1;
-	}
-	/* Else check for 750FX */
-	else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000)
-		pmac_cpufreq_init_750FX(cpunode);
-out:
-	of_node_put(cpunode);
-	if (set_speed_proc == NULL)
-		return -ENODEV;
-
-	pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq;
-	pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
-	ppc_proc_freq = cur_freq * 1000ul;
-
-	printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
-	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
-	       low_freq/1000, hi_freq/1000, cur_freq/1000);
-
-	return cpufreq_register_driver(&pmac_cpufreq_driver);
-}
-
-module_init(pmac_cpufreq_setup);
-
diff --git a/arch/powerpc/platforms/powermac/cpufreq_64.c b/arch/powerpc/platforms/powermac/cpufreq_64.c
deleted file mode 100644
index 7ba4234..0000000
--- a/arch/powerpc/platforms/powermac/cpufreq_64.c
+++ /dev/null
@@ -1,746 +0,0 @@
-/*
- *  Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org>
- *  and                       Markus Demleitner <msdemlei@cl.uni-heidelberg.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This driver adds basic cpufreq support for SMU & 970FX based G5 Macs,
- * that is iMac G5 and latest single CPU desktop.
- */
-
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/cpufreq.h>
-#include <linux/init.h>
-#include <linux/completion.h>
-#include <linux/mutex.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/irq.h>
-#include <asm/sections.h>
-#include <asm/cputable.h>
-#include <asm/time.h>
-#include <asm/smu.h>
-#include <asm/pmac_pfunc.h>
-
-#define DBG(fmt...) pr_debug(fmt)
-
-/* see 970FX user manual */
-
-#define SCOM_PCR 0x0aa001			/* PCR scom addr */
-
-#define PCR_HILO_SELECT		0x80000000U	/* 1 = PCR, 0 = PCRH */
-#define PCR_SPEED_FULL		0x00000000U	/* 1:1 speed value */
-#define PCR_SPEED_HALF		0x00020000U	/* 1:2 speed value */
-#define PCR_SPEED_QUARTER	0x00040000U	/* 1:4 speed value */
-#define PCR_SPEED_MASK		0x000e0000U	/* speed mask */
-#define PCR_SPEED_SHIFT		17
-#define PCR_FREQ_REQ_VALID	0x00010000U	/* freq request valid */
-#define PCR_VOLT_REQ_VALID	0x00008000U	/* volt request valid */
-#define PCR_TARGET_TIME_MASK	0x00006000U	/* target time */
-#define PCR_STATLAT_MASK	0x00001f00U	/* STATLAT value */
-#define PCR_SNOOPLAT_MASK	0x000000f0U	/* SNOOPLAT value */
-#define PCR_SNOOPACC_MASK	0x0000000fU	/* SNOOPACC value */
-
-#define SCOM_PSR 0x408001			/* PSR scom addr */
-/* warning: PSR is a 64 bits register */
-#define PSR_CMD_RECEIVED	0x2000000000000000U   /* command received */
-#define PSR_CMD_COMPLETED	0x1000000000000000U   /* command completed */
-#define PSR_CUR_SPEED_MASK	0x0300000000000000U   /* current speed */
-#define PSR_CUR_SPEED_SHIFT	(56)
-
-/*
- * The G5 only supports two frequencies (Quarter speed is not supported)
- */
-#define CPUFREQ_HIGH                  0
-#define CPUFREQ_LOW                   1
-
-static struct cpufreq_frequency_table g5_cpu_freqs[] = {
-	{CPUFREQ_HIGH, 		0},
-	{CPUFREQ_LOW,		0},
-	{0,			CPUFREQ_TABLE_END},
-};
-
-static struct freq_attr* g5_cpu_freqs_attr[] = {
-	&cpufreq_freq_attr_scaling_available_freqs,
-	NULL,
-};
-
-/* Power mode data is an array of the 32 bits PCR values to use for
- * the various frequencies, retrieved from the device-tree
- */
-static int g5_pmode_cur;
-
-static void (*g5_switch_volt)(int speed_mode);
-static int (*g5_switch_freq)(int speed_mode);
-static int (*g5_query_freq)(void);
-
-static DEFINE_MUTEX(g5_switch_mutex);
-
-static unsigned long transition_latency;
-
-#ifdef CONFIG_PMAC_SMU
-
-static const u32 *g5_pmode_data;
-static int g5_pmode_max;
-
-static struct smu_sdbp_fvt *g5_fvt_table;	/* table of op. points */
-static int g5_fvt_count;			/* number of op. points */
-static int g5_fvt_cur;				/* current op. point */
-
-/*
- * SMU based voltage switching for Neo2 platforms
- */
-
-static void g5_smu_switch_volt(int speed_mode)
-{
-	struct smu_simple_cmd	cmd;
-
-	DECLARE_COMPLETION_ONSTACK(comp);
-	smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, smu_done_complete,
-			 &comp, 'V', 'S', 'L', 'E', 'W',
-			 0xff, g5_fvt_cur+1, speed_mode);
-	wait_for_completion(&comp);
-}
-
-/*
- * Platform function based voltage/vdnap switching for Neo2
- */
-
-static struct pmf_function *pfunc_set_vdnap0;
-static struct pmf_function *pfunc_vdnap0_complete;
-
-static void g5_vdnap_switch_volt(int speed_mode)
-{
-	struct pmf_args args;
-	u32 slew, done = 0;
-	unsigned long timeout;
-
-	slew = (speed_mode == CPUFREQ_LOW) ? 1 : 0;
-	args.count = 1;
-	args.u[0].p = &slew;
-
-	pmf_call_one(pfunc_set_vdnap0, &args);
-
-	/* It's an irq GPIO so we should be able to just block here,
-	 * I'll do that later after I've properly tested the IRQ code for
-	 * platform functions
-	 */
-	timeout = jiffies + HZ/10;
-	while(!time_after(jiffies, timeout)) {
-		args.count = 1;
-		args.u[0].p = &done;
-		pmf_call_one(pfunc_vdnap0_complete, &args);
-		if (done)
-			break;
-		msleep(1);
-	}
-	if (done == 0)
-		printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
-}
-
-
-/*
- * SCOM based frequency switching for 970FX rev3
- */
-static int g5_scom_switch_freq(int speed_mode)
-{
-	unsigned long flags;
-	int to;
-
-	/* If frequency is going up, first ramp up the voltage */
-	if (speed_mode < g5_pmode_cur)
-		g5_switch_volt(speed_mode);
-
-	local_irq_save(flags);
-
-	/* Clear PCR high */
-	scom970_write(SCOM_PCR, 0);
-	/* Clear PCR low */
-       	scom970_write(SCOM_PCR, PCR_HILO_SELECT | 0);
-	/* Set PCR low */
-	scom970_write(SCOM_PCR, PCR_HILO_SELECT |
-		      g5_pmode_data[speed_mode]);
-
-	/* Wait for completion */
-	for (to = 0; to < 10; to++) {
-		unsigned long psr = scom970_read(SCOM_PSR);
-
-		if ((psr & PSR_CMD_RECEIVED) == 0 &&
-		    (((psr >> PSR_CUR_SPEED_SHIFT) ^
-		      (g5_pmode_data[speed_mode] >> PCR_SPEED_SHIFT)) & 0x3)
-		    == 0)
-			break;
-		if (psr & PSR_CMD_COMPLETED)
-			break;
-		udelay(100);
-	}
-
-	local_irq_restore(flags);
-
-	/* If frequency is going down, last ramp the voltage */
-	if (speed_mode > g5_pmode_cur)
-		g5_switch_volt(speed_mode);
-
-	g5_pmode_cur = speed_mode;
-	ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
-
-	return 0;
-}
-
-static int g5_scom_query_freq(void)
-{
-	unsigned long psr = scom970_read(SCOM_PSR);
-	int i;
-
-	for (i = 0; i <= g5_pmode_max; i++)
-		if ((((psr >> PSR_CUR_SPEED_SHIFT) ^
-		      (g5_pmode_data[i] >> PCR_SPEED_SHIFT)) & 0x3) == 0)
-			break;
-	return i;
-}
-
-/*
- * Fake voltage switching for platforms with missing support
- */
-
-static void g5_dummy_switch_volt(int speed_mode)
-{
-}
-
-#endif /* CONFIG_PMAC_SMU */
-
-/*
- * Platform function based voltage switching for PowerMac7,2 & 7,3
- */
-
-static struct pmf_function *pfunc_cpu0_volt_high;
-static struct pmf_function *pfunc_cpu0_volt_low;
-static struct pmf_function *pfunc_cpu1_volt_high;
-static struct pmf_function *pfunc_cpu1_volt_low;
-
-static void g5_pfunc_switch_volt(int speed_mode)
-{
-	if (speed_mode == CPUFREQ_HIGH) {
-		if (pfunc_cpu0_volt_high)
-			pmf_call_one(pfunc_cpu0_volt_high, NULL);
-		if (pfunc_cpu1_volt_high)
-			pmf_call_one(pfunc_cpu1_volt_high, NULL);
-	} else {
-		if (pfunc_cpu0_volt_low)
-			pmf_call_one(pfunc_cpu0_volt_low, NULL);
-		if (pfunc_cpu1_volt_low)
-			pmf_call_one(pfunc_cpu1_volt_low, NULL);
-	}
-	msleep(10); /* should be faster , to fix */
-}
-
-/*
- * Platform function based frequency switching for PowerMac7,2 & 7,3
- */
-
-static struct pmf_function *pfunc_cpu_setfreq_high;
-static struct pmf_function *pfunc_cpu_setfreq_low;
-static struct pmf_function *pfunc_cpu_getfreq;
-static struct pmf_function *pfunc_slewing_done;
-
-static int g5_pfunc_switch_freq(int speed_mode)
-{
-	struct pmf_args args;
-	u32 done = 0;
-	unsigned long timeout;
-	int rc;
-
-	DBG("g5_pfunc_switch_freq(%d)\n", speed_mode);
-
-	/* If frequency is going up, first ramp up the voltage */
-	if (speed_mode < g5_pmode_cur)
-		g5_switch_volt(speed_mode);
-
-	/* Do it */
-	if (speed_mode == CPUFREQ_HIGH)
-		rc = pmf_call_one(pfunc_cpu_setfreq_high, NULL);
-	else
-		rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
-
-	if (rc)
-		printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
-
-	/* It's an irq GPIO so we should be able to just block here,
-	 * I'll do that later after I've properly tested the IRQ code for
-	 * platform functions
-	 */
-	timeout = jiffies + HZ/10;
-	while(!time_after(jiffies, timeout)) {
-		args.count = 1;
-		args.u[0].p = &done;
-		pmf_call_one(pfunc_slewing_done, &args);
-		if (done)
-			break;
-		msleep(1);
-	}
-	if (done == 0)
-		printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
-
-	/* If frequency is going down, last ramp the voltage */
-	if (speed_mode > g5_pmode_cur)
-		g5_switch_volt(speed_mode);
-
-	g5_pmode_cur = speed_mode;
-	ppc_proc_freq = g5_cpu_freqs[speed_mode].frequency * 1000ul;
-
-	return 0;
-}
-
-static int g5_pfunc_query_freq(void)
-{
-	struct pmf_args args;
-	u32 val = 0;
-
-	args.count = 1;
-	args.u[0].p = &val;
-	pmf_call_one(pfunc_cpu_getfreq, &args);
-	return val ? CPUFREQ_HIGH : CPUFREQ_LOW;
-}
-
-
-/*
- * Common interface to the cpufreq core
- */
-
-static int g5_cpufreq_verify(struct cpufreq_policy *policy)
-{
-	return cpufreq_frequency_table_verify(policy, g5_cpu_freqs);
-}
-
-static int g5_cpufreq_target(struct cpufreq_policy *policy,
-	unsigned int target_freq, unsigned int relation)
-{
-	unsigned int newstate = 0;
-	struct cpufreq_freqs freqs;
-	int rc;
-
-	if (cpufreq_frequency_table_target(policy, g5_cpu_freqs,
-			target_freq, relation, &newstate))
-		return -EINVAL;
-
-	if (g5_pmode_cur == newstate)
-		return 0;
-
-	mutex_lock(&g5_switch_mutex);
-
-	freqs.old = g5_cpu_freqs[g5_pmode_cur].frequency;
-	freqs.new = g5_cpu_freqs[newstate].frequency;
-
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
-	rc = g5_switch_freq(newstate);
-	cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
-
-	mutex_unlock(&g5_switch_mutex);
-
-	return rc;
-}
-
-static unsigned int g5_cpufreq_get_speed(unsigned int cpu)
-{
-	return g5_cpu_freqs[g5_pmode_cur].frequency;
-}
-
-static int g5_cpufreq_cpu_init(struct cpufreq_policy *policy)
-{
-	policy->cpuinfo.transition_latency = transition_latency;
-	policy->cur = g5_cpu_freqs[g5_query_freq()].frequency;
-	/* secondary CPUs are tied to the primary one by the
-	 * cpufreq core if in the secondary policy we tell it that
-	 * it actually must be one policy together with all others. */
-	cpumask_copy(policy->cpus, cpu_online_mask);
-	cpufreq_frequency_table_get_attr(g5_cpu_freqs, policy->cpu);
-
-	return cpufreq_frequency_table_cpuinfo(policy,
-		g5_cpu_freqs);
-}
-
-
-static struct cpufreq_driver g5_cpufreq_driver = {
-	.name		= "powermac",
-	.owner		= THIS_MODULE,
-	.flags		= CPUFREQ_CONST_LOOPS,
-	.init		= g5_cpufreq_cpu_init,
-	.verify		= g5_cpufreq_verify,
-	.target		= g5_cpufreq_target,
-	.get		= g5_cpufreq_get_speed,
-	.attr 		= g5_cpu_freqs_attr,
-};
-
-
-#ifdef CONFIG_PMAC_SMU
-
-static int __init g5_neo2_cpufreq_init(struct device_node *cpus)
-{
-	struct device_node *cpunode;
-	unsigned int psize, ssize;
-	unsigned long max_freq;
-	char *freq_method, *volt_method;
-	const u32 *valp;
-	u32 pvr_hi;
-	int use_volts_vdnap = 0;
-	int use_volts_smu = 0;
-	int rc = -ENODEV;
-
-	/* Check supported platforms */
-	if (of_machine_is_compatible("PowerMac8,1") ||
-	    of_machine_is_compatible("PowerMac8,2") ||
-	    of_machine_is_compatible("PowerMac9,1"))
-		use_volts_smu = 1;
-	else if (of_machine_is_compatible("PowerMac11,2"))
-		use_volts_vdnap = 1;
-	else
-		return -ENODEV;
-
-	/* Get first CPU node */
-	for (cpunode = NULL;
-	     (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
-		const u32 *reg = of_get_property(cpunode, "reg", NULL);
-		if (reg == NULL || (*reg) != 0)
-			continue;
-		if (!strcmp(cpunode->type, "cpu"))
-			break;
-	}
-	if (cpunode == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
-		return -ENODEV;
-	}
-
-	/* Check 970FX for now */
-	valp = of_get_property(cpunode, "cpu-version", NULL);
-	if (!valp) {
-		DBG("No cpu-version property !\n");
-		goto bail_noprops;
-	}
-	pvr_hi = (*valp) >> 16;
-	if (pvr_hi != 0x3c && pvr_hi != 0x44) {
-		printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
-		goto bail_noprops;
-	}
-
-	/* Look for the powertune data in the device-tree */
-	g5_pmode_data = of_get_property(cpunode, "power-mode-data",&psize);
-	if (!g5_pmode_data) {
-		DBG("No power-mode-data !\n");
-		goto bail_noprops;
-	}
-	g5_pmode_max = psize / sizeof(u32) - 1;
-
-	if (use_volts_smu) {
-		const struct smu_sdbp_header *shdr;
-
-		/* Look for the FVT table */
-		shdr = smu_get_sdb_partition(SMU_SDB_FVT_ID, NULL);
-		if (!shdr)
-			goto bail_noprops;
-		g5_fvt_table = (struct smu_sdbp_fvt *)&shdr[1];
-		ssize = (shdr->len * sizeof(u32)) -
-			sizeof(struct smu_sdbp_header);
-		g5_fvt_count = ssize / sizeof(struct smu_sdbp_fvt);
-		g5_fvt_cur = 0;
-
-		/* Sanity checking */
-		if (g5_fvt_count < 1 || g5_pmode_max < 1)
-			goto bail_noprops;
-
-		g5_switch_volt = g5_smu_switch_volt;
-		volt_method = "SMU";
-	} else if (use_volts_vdnap) {
-		struct device_node *root;
-
-		root = of_find_node_by_path("/");
-		if (root == NULL) {
-			printk(KERN_ERR "cpufreq: Can't find root of "
-			       "device tree\n");
-			goto bail_noprops;
-		}
-		pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
-		pfunc_vdnap0_complete =
-			pmf_find_function(root, "slewing-done");
-		if (pfunc_set_vdnap0 == NULL ||
-		    pfunc_vdnap0_complete == NULL) {
-			printk(KERN_ERR "cpufreq: Can't find required "
-			       "platform function\n");
-			goto bail_noprops;
-		}
-
-		g5_switch_volt = g5_vdnap_switch_volt;
-		volt_method = "GPIO";
-	} else {
-		g5_switch_volt = g5_dummy_switch_volt;
-		volt_method = "none";
-	}
-
-	/*
-	 * From what I see, clock-frequency is always the maximal frequency.
-	 * The current driver can not slew sysclk yet, so we really only deal
-	 * with powertune steps for now. We also only implement full freq and
-	 * half freq in this version. So far, I haven't yet seen a machine
-	 * supporting anything else.
-	 */
-	valp = of_get_property(cpunode, "clock-frequency", NULL);
-	if (!valp)
-		return -ENODEV;
-	max_freq = (*valp)/1000;
-	g5_cpu_freqs[0].frequency = max_freq;
-	g5_cpu_freqs[1].frequency = max_freq/2;
-
-	/* Set callbacks */
-	transition_latency = 12000;
-	g5_switch_freq = g5_scom_switch_freq;
-	g5_query_freq = g5_scom_query_freq;
-	freq_method = "SCOM";
-
-	/* Force apply current frequency to make sure everything is in
-	 * sync (voltage is right for example). Firmware may leave us with
-	 * a strange setting ...
-	 */
-	g5_switch_volt(CPUFREQ_HIGH);
-	msleep(10);
-	g5_pmode_cur = -1;
-	g5_switch_freq(g5_query_freq());
-
-	printk(KERN_INFO "Registering G5 CPU frequency driver\n");
-	printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
-	       freq_method, volt_method);
-	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
-		g5_cpu_freqs[1].frequency/1000,
-		g5_cpu_freqs[0].frequency/1000,
-		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
-
-	rc = cpufreq_register_driver(&g5_cpufreq_driver);
-
-	/* We keep the CPU node on hold... hopefully, Apple G5 don't have
-	 * hotplug CPU with a dynamic device-tree ...
-	 */
-	return rc;
-
- bail_noprops:
-	of_node_put(cpunode);
-
-	return rc;
-}
-
-#endif /* CONFIG_PMAC_SMU */
-
-
-static int __init g5_pm72_cpufreq_init(struct device_node *cpus)
-{
-	struct device_node *cpuid = NULL, *hwclock = NULL, *cpunode = NULL;
-	const u8 *eeprom = NULL;
-	const u32 *valp;
-	u64 max_freq, min_freq, ih, il;
-	int has_volt = 1, rc = 0;
-
-	DBG("cpufreq: Initializing for PowerMac7,2, PowerMac7,3 and"
-	    " RackMac3,1...\n");
-
-	/* Get first CPU node */
-	for (cpunode = NULL;
-	     (cpunode = of_get_next_child(cpus, cpunode)) != NULL;) {
-		if (!strcmp(cpunode->type, "cpu"))
-			break;
-	}
-	if (cpunode == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find any CPU node\n");
-		return -ENODEV;
-	}
-
-	/* Lookup the cpuid eeprom node */
-        cpuid = of_find_node_by_path("/u3@0,f8000000/i2c@f8001000/cpuid@a0");
-	if (cpuid != NULL)
-		eeprom = of_get_property(cpuid, "cpuid", NULL);
-	if (eeprom == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
-		rc = -ENODEV;
-		goto bail;
-	}
-
-	/* Lookup the i2c hwclock */
-	for (hwclock = NULL;
-	     (hwclock = of_find_node_by_name(hwclock, "i2c-hwclock")) != NULL;){
-		const char *loc = of_get_property(hwclock,
-				"hwctrl-location", NULL);
-		if (loc == NULL)
-			continue;
-		if (strcmp(loc, "CPU CLOCK"))
-			continue;
-		if (!of_get_property(hwclock, "platform-get-frequency", NULL))
-			continue;
-		break;
-	}
-	if (hwclock == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
-		rc = -ENODEV;
-		goto bail;
-	}
-
-	DBG("cpufreq: i2c clock chip found: %s\n", hwclock->full_name);
-
-	/* Now get all the platform functions */
-	pfunc_cpu_getfreq =
-		pmf_find_function(hwclock, "get-frequency");
-	pfunc_cpu_setfreq_high =
-		pmf_find_function(hwclock, "set-frequency-high");
-	pfunc_cpu_setfreq_low =
-		pmf_find_function(hwclock, "set-frequency-low");
-	pfunc_slewing_done =
-		pmf_find_function(hwclock, "slewing-done");
-	pfunc_cpu0_volt_high =
-		pmf_find_function(hwclock, "set-voltage-high-0");
-	pfunc_cpu0_volt_low =
-		pmf_find_function(hwclock, "set-voltage-low-0");
-	pfunc_cpu1_volt_high =
-		pmf_find_function(hwclock, "set-voltage-high-1");
-	pfunc_cpu1_volt_low =
-		pmf_find_function(hwclock, "set-voltage-low-1");
-
-	/* Check we have minimum requirements */
-	if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
-	    pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
-		printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
-		rc = -ENODEV;
-		goto bail;
-	}
-
-	/* Check that we have complete sets */
-	if (pfunc_cpu0_volt_high == NULL || pfunc_cpu0_volt_low == NULL) {
-		pmf_put_function(pfunc_cpu0_volt_high);
-		pmf_put_function(pfunc_cpu0_volt_low);
-		pfunc_cpu0_volt_high = pfunc_cpu0_volt_low = NULL;
-		has_volt = 0;
-	}
-	if (!has_volt ||
-	    pfunc_cpu1_volt_high == NULL || pfunc_cpu1_volt_low == NULL) {
-		pmf_put_function(pfunc_cpu1_volt_high);
-		pmf_put_function(pfunc_cpu1_volt_low);
-		pfunc_cpu1_volt_high = pfunc_cpu1_volt_low = NULL;
-	}
-
-	/* Note: The device tree also contains a "platform-set-values"
-	 * function for which I haven't quite figured out the usage. It
-	 * might have to be called on init and/or wakeup, I'm not too sure
-	 * but things seem to work fine without it so far ...
-	 */
-
-	/* Get max frequency from device-tree */
-	valp = of_get_property(cpunode, "clock-frequency", NULL);
-	if (!valp) {
-		printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
-		rc = -ENODEV;
-		goto bail;
-	}
-
-	max_freq = (*valp)/1000;
-
-	/* Now calculate reduced frequency by using the cpuid input freq
-	 * ratio. This requires 64 bits math unless we are willing to lose
-	 * some precision
-	 */
-	ih = *((u32 *)(eeprom + 0x10));
-	il = *((u32 *)(eeprom + 0x20));
-
-	/* Check for machines with no useful settings */
-	if (il == ih) {
-		printk(KERN_WARNING "cpufreq: No low frequency mode available"
-		       " on this model !\n");
-		rc = -ENODEV;
-		goto bail;
-	}
-
-	min_freq = 0;
-	if (ih != 0 && il != 0)
-		min_freq = (max_freq * il) / ih;
-
-	/* Sanity check */
-	if (min_freq >= max_freq || min_freq < 1000) {
-		printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
-		rc = -ENXIO;
-		goto bail;
-	}
-	g5_cpu_freqs[0].frequency = max_freq;
-	g5_cpu_freqs[1].frequency = min_freq;
-
-	/* Set callbacks */
-	transition_latency = CPUFREQ_ETERNAL;
-	g5_switch_volt = g5_pfunc_switch_volt;
-	g5_switch_freq = g5_pfunc_switch_freq;
-	g5_query_freq = g5_pfunc_query_freq;
-
-	/* Force apply current frequency to make sure everything is in
-	 * sync (voltage is right for example). Firmware may leave us with
-	 * a strange setting ...
-	 */
-	g5_switch_volt(CPUFREQ_HIGH);
-	msleep(10);
-	g5_pmode_cur = -1;
-	g5_switch_freq(g5_query_freq());
-
-	printk(KERN_INFO "Registering G5 CPU frequency driver\n");
-	printk(KERN_INFO "Frequency method: i2c/pfunc, "
-	       "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
-	printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
-		g5_cpu_freqs[1].frequency/1000,
-		g5_cpu_freqs[0].frequency/1000,
-		g5_cpu_freqs[g5_pmode_cur].frequency/1000);
-
-	rc = cpufreq_register_driver(&g5_cpufreq_driver);
- bail:
-	if (rc != 0) {
-		pmf_put_function(pfunc_cpu_getfreq);
-		pmf_put_function(pfunc_cpu_setfreq_high);
-		pmf_put_function(pfunc_cpu_setfreq_low);
-		pmf_put_function(pfunc_slewing_done);
-		pmf_put_function(pfunc_cpu0_volt_high);
-		pmf_put_function(pfunc_cpu0_volt_low);
-		pmf_put_function(pfunc_cpu1_volt_high);
-		pmf_put_function(pfunc_cpu1_volt_low);
-	}
-	of_node_put(hwclock);
-	of_node_put(cpuid);
-	of_node_put(cpunode);
-
-	return rc;
-}
-
-static int __init g5_cpufreq_init(void)
-{
-	struct device_node *cpus;
-	int rc = 0;
-
-	cpus = of_find_node_by_path("/cpus");
-	if (cpus == NULL) {
-		DBG("No /cpus node !\n");
-		return -ENODEV;
-	}
-
-	if (of_machine_is_compatible("PowerMac7,2") ||
-	    of_machine_is_compatible("PowerMac7,3") ||
-	    of_machine_is_compatible("RackMac3,1"))
-		rc = g5_pm72_cpufreq_init(cpus);
-#ifdef CONFIG_PMAC_SMU
-	else
-		rc = g5_neo2_cpufreq_init(cpus);
-#endif /* CONFIG_PMAC_SMU */
-
-	of_node_put(cpus);
-	return rc;
-}
-
-module_init(g5_cpufreq_init);
-
-
-MODULE_LICENSE("GPL");