diff options
author | Paul Mackerras <paulus@samba.org> | 2006-03-27 04:22:28 (GMT) |
---|---|---|
committer | Paul Mackerras <paulus@samba.org> | 2006-03-27 04:22:28 (GMT) |
commit | 0eb4cb9b16aba6d610a0716503b96d299b308d44 (patch) | |
tree | 3a8b8ed7e3f4b5bde9b690b17aca7926ba9bef90 /arch/ppc | |
parent | fbd7740fdfdf9475f92287a84085a1913541cd5d (diff) | |
download | linux-fsl-qoriq-0eb4cb9b16aba6d610a0716503b96d299b308d44.tar.xz |
powerpc: Move l2cr.S over to arch/powerpc
No functional changes, but call it l2cr_6xx.S since it is specific
to 6xx-family (including G3/750 and G4/74xx) processors.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/ppc')
-rw-r--r-- | arch/ppc/kernel/Makefile | 4 | ||||
-rw-r--r-- | arch/ppc/kernel/l2cr.S | 471 |
2 files changed, 2 insertions, 473 deletions
diff --git a/arch/ppc/kernel/Makefile b/arch/ppc/kernel/Makefile index 1b2c745..3d50a26 100644 --- a/arch/ppc/kernel/Makefile +++ b/arch/ppc/kernel/Makefile @@ -13,7 +13,7 @@ extra-y += vmlinux.lds obj-y := entry.o traps.o time.o misc.o \ setup.o \ ppc_htab.o -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o +obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o ppc_ksyms.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o @@ -34,7 +34,7 @@ endif # These are here while we do the architecture merge else -obj-$(CONFIG_6xx) += l2cr.o cpu_setup_6xx.o +obj-$(CONFIG_6xx) += cpu_setup_6xx.o obj-$(CONFIG_SOFTWARE_SUSPEND) += swsusp.o obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-mapping.o diff --git a/arch/ppc/kernel/l2cr.S b/arch/ppc/kernel/l2cr.S deleted file mode 100644 index d7f4e98..0000000 --- a/arch/ppc/kernel/l2cr.S +++ /dev/null @@ -1,471 +0,0 @@ -/* - L2CR functions - Copyright © 1997-1998 by PowerLogix R & D, Inc. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ -/* - Thur, Dec. 12, 1998. - - First public release, contributed by PowerLogix. - *********** - Sat, Aug. 7, 1999. - - Terry: Made sure code disabled interrupts before running. (Previously - it was assumed interrupts were already disabled). - - Terry: Updated for tentative G4 support. 4MB of memory is now flushed - instead of 2MB. (Prob. only 3 is necessary). - - Terry: Updated for workaround to HID0[DPM] processor bug - during global invalidates. - *********** - Thu, July 13, 2000. - - Terry: Added isync to correct for an errata. - - 22 August 2001. - - DanM: Finally added the 7450 patch I've had for the past - several months. The L2CR is similar, but I'm going - to assume the user of this functions knows what they - are doing. - - Author: Terry Greeniaus (tgree@phys.ualberta.ca) - Please e-mail updates to this file to me, thanks! -*/ -#include <linux/config.h> -#include <asm/processor.h> -#include <asm/cputable.h> -#include <asm/ppc_asm.h> -#include <asm/cache.h> -#include <asm/page.h> - -/* Usage: - - When setting the L2CR register, you must do a few special - things. If you are enabling the cache, you must perform a - global invalidate. If you are disabling the cache, you must - flush the cache contents first. This routine takes care of - doing these things. When first enabling the cache, make sure - you pass in the L2CR you want, as well as passing in the - global invalidate bit set. A global invalidate will only be - performed if the L2I bit is set in applyThis. When enabling - the cache, you should also set the L2E bit in applyThis. If - you want to modify the L2CR contents after the cache has been - enabled, the recommended procedure is to first call - __setL2CR(0) to disable the cache and then call it again with - the new values for L2CR. Examples: - - _setL2CR(0) - disables the cache - _setL2CR(0xB3A04000) - enables my G3 upgrade card: - - L2E set to turn on the cache - - L2SIZ set to 1MB - - L2CLK set to 1:1 - - L2RAM set to pipelined synchronous late-write - - L2I set to perform a global invalidation - - L2OH set to 0.5 nS - - L2DF set because this upgrade card - requires it - - A similar call should work for your card. You need to know - the correct setting for your card and then place them in the - fields I have outlined above. Other fields support optional - features, such as L2DO which caches only data, or L2TS which - causes cache pushes from the L1 cache to go to the L2 cache - instead of to main memory. - -IMPORTANT: - Starting with the 7450, the bits in this register have moved - or behave differently. The Enable, Parity Enable, Size, - and L2 Invalidate are the only bits that have not moved. - The size is read-only for these processors with internal L2 - cache, and the invalidate is a control as well as status. - -- Dan - -*/ -/* - * Summary: this procedure ignores the L2I bit in the value passed in, - * flushes the cache if it was already enabled, always invalidates the - * cache, then enables the cache if the L2E bit is set in the value - * passed in. - * -- paulus. - */ -_GLOBAL(_set_L2CR) - /* Make sure this is a 750 or 7400 chip */ -BEGIN_FTR_SECTION - li r3,-1 - blr -END_FTR_SECTION_IFCLR(CPU_FTR_L2CR) - - mflr r9 - - /* Stop DST streams */ -BEGIN_FTR_SECTION - DSSALL - sync -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - - /* Turn off interrupts and data relocation. */ - mfmsr r7 /* Save MSR in r7 */ - rlwinm r4,r7,0,17,15 - rlwinm r4,r4,0,28,26 /* Turn off DR bit */ - sync - mtmsr r4 - isync - - /* Before we perform the global invalidation, we must disable dynamic - * power management via HID0[DPM] to work around a processor bug where - * DPM can possibly interfere with the state machine in the processor - * that invalidates the L2 cache tags. - */ - mfspr r8,SPRN_HID0 /* Save HID0 in r8 */ - rlwinm r4,r8,0,12,10 /* Turn off HID0[DPM] */ - sync - mtspr SPRN_HID0,r4 /* Disable DPM */ - sync - - /* Get the current enable bit of the L2CR into r4 */ - mfspr r4,SPRN_L2CR - - /* Tweak some bits */ - rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ - rlwinm r3,r3,0,11,9 /* Turn off the invalidate bit */ - rlwinm r3,r3,0,1,31 /* Turn off the enable bit */ - - /* Check to see if we need to flush */ - rlwinm. r4,r4,0,0,0 - beq 2f - - /* Flush the cache. First, read the first 4MB of memory (physical) to - * put new data in the cache. (Actually we only need - * the size of the L2 cache plus the size of the L1 cache, but 4MB will - * cover everything just to be safe). - */ - - /**** Might be a good idea to set L2DO here - to prevent instructions - from getting into the cache. But since we invalidate - the next time we enable the cache it doesn't really matter. - Don't do this unless you accomodate all processor variations. - The bit moved on the 7450..... - ****/ - -BEGIN_FTR_SECTION - /* Disable L2 prefetch on some 745x and try to ensure - * L2 prefetch engines are idle. As explained by errata - * text, we can't be sure they are, we just hope very hard - * that well be enough (sic !). At least I noticed Apple - * doesn't even bother doing the dcbf's here... - */ - mfspr r4,SPRN_MSSCR0 - rlwinm r4,r4,0,0,29 - sync - mtspr SPRN_MSSCR0,r4 - sync - isync - lis r4,KERNELBASE@h - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 - dcbf 0,r4 -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) - - /* TODO: use HW flush assist when available */ - - lis r4,0x0002 - mtctr r4 - li r4,0 -1: - lwzx r0,r0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - isync - - /* Now, flush the first 4MB of memory */ - lis r4,0x0002 - mtctr r4 - li r4,0 - sync -1: - dcbf 0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - -2: - /* Set up the L2CR configuration bits (and switch L2 off) */ - /* CPU errata: Make sure the mtspr below is already in the - * L1 icache - */ - b 20f - .balign L1_CACHE_BYTES -22: - sync - mtspr SPRN_L2CR,r3 - sync - b 23f -20: - b 21f -21: sync - isync - b 22b - -23: - /* Perform a global invalidation */ - oris r3,r3,0x0020 - sync - mtspr SPRN_L2CR,r3 - sync - isync /* For errata */ - -BEGIN_FTR_SECTION - /* On the 7450, we wait for the L2I bit to clear...... - */ -10: mfspr r3,SPRN_L2CR - andis. r4,r3,0x0020 - bne 10b - b 11f -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) - - /* Wait for the invalidation to complete */ -3: mfspr r3,SPRN_L2CR - rlwinm. r4,r3,0,31,31 - bne 3b - -11: rlwinm r3,r3,0,11,9 /* Turn off the L2I bit */ - sync - mtspr SPRN_L2CR,r3 - sync - - /* See if we need to enable the cache */ - cmplwi r5,0 - beq 4f - - /* Enable the cache */ - oris r3,r3,0x8000 - mtspr SPRN_L2CR,r3 - sync - - /* Enable L2 HW prefetch on 744x/745x */ -BEGIN_FTR_SECTION - mfspr r3,SPRN_MSSCR0 - ori r3,r3,3 - sync - mtspr SPRN_MSSCR0,r3 - sync - isync -END_FTR_SECTION_IFSET(CPU_FTR_SPEC7450) -4: - - /* Restore HID0[DPM] to whatever it was before */ - sync - mtspr 1008,r8 - sync - - /* Restore MSR (restores EE and DR bits to original state) */ - SYNC - mtmsr r7 - isync - - mtlr r9 - blr - -_GLOBAL(_get_L2CR) - /* Return the L2CR contents */ - li r3,0 -BEGIN_FTR_SECTION - mfspr r3,SPRN_L2CR -END_FTR_SECTION_IFSET(CPU_FTR_L2CR) - blr - - -/* - * Here is a similar routine for dealing with the L3 cache - * on the 745x family of chips - */ - -_GLOBAL(_set_L3CR) - /* Make sure this is a 745x chip */ -BEGIN_FTR_SECTION - li r3,-1 - blr -END_FTR_SECTION_IFCLR(CPU_FTR_L3CR) - - /* Turn off interrupts and data relocation. */ - mfmsr r7 /* Save MSR in r7 */ - rlwinm r4,r7,0,17,15 - rlwinm r4,r4,0,28,26 /* Turn off DR bit */ - sync - mtmsr r4 - isync - - /* Stop DST streams */ - DSSALL - sync - - /* Get the current enable bit of the L3CR into r4 */ - mfspr r4,SPRN_L3CR - - /* Tweak some bits */ - rlwinm r5,r3,0,0,0 /* r5 contains the new enable bit */ - rlwinm r3,r3,0,22,20 /* Turn off the invalidate bit */ - rlwinm r3,r3,0,2,31 /* Turn off the enable & PE bits */ - rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ - /* Check to see if we need to flush */ - rlwinm. r4,r4,0,0,0 - beq 2f - - /* Flush the cache. - */ - - /* TODO: use HW flush assist */ - - lis r4,0x0008 - mtctr r4 - li r4,0 -1: - lwzx r0,r0,r4 - dcbf 0,r4 - addi r4,r4,32 /* Go to start of next cache line */ - bdnz 1b - -2: - /* Set up the L3CR configuration bits (and switch L3 off) */ - sync - mtspr SPRN_L3CR,r3 - sync - - oris r3,r3,L3CR_L3RES@h /* Set reserved bit 5 */ - mtspr SPRN_L3CR,r3 - sync - oris r3,r3,L3CR_L3CLKEN@h /* Set clken */ - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* Perform a global invalidation */ - ori r3,r3,0x0400 - sync - mtspr SPRN_L3CR,r3 - sync - isync - - /* We wait for the L3I bit to clear...... */ -10: mfspr r3,SPRN_L3CR - andi. r4,r3,0x0400 - bne 10b - - /* Clear CLKEN */ - rlwinm r3,r3,0,5,3 /* Turn off the clken bit */ - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* See if we need to enable the cache */ - cmplwi r5,0 - beq 4f - - /* Enable the cache */ - oris r3,r3,(L3CR_L3E | L3CR_L3CLKEN)@h - mtspr SPRN_L3CR,r3 - sync - - /* Wait for stabilize */ - li r0,256 - mtctr r0 -1: bdnz 1b - - /* Restore MSR (restores EE and DR bits to original state) */ -4: SYNC - mtmsr r7 - isync - blr - -_GLOBAL(_get_L3CR) - /* Return the L3CR contents */ - li r3,0 -BEGIN_FTR_SECTION - mfspr r3,SPRN_L3CR -END_FTR_SECTION_IFSET(CPU_FTR_L3CR) - blr - -/* --- End of PowerLogix code --- - */ - - -/* flush_disable_L1() - Flush and disable L1 cache - * - * clobbers r0, r3, ctr, cr0 - * Must be called with interrupts disabled and MMU enabled. - */ -_GLOBAL(__flush_disable_L1) - /* Stop pending alitvec streams and memory accesses */ -BEGIN_FTR_SECTION - DSSALL -END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC) - sync - - /* Load counter to 0x4000 cache lines (512k) and - * load cache with datas - */ - li r3,0x4000 /* 512kB / 32B */ - mtctr r3 - lis r3,KERNELBASE@h -1: - lwz r0,0(r3) - addi r3,r3,0x0020 /* Go to start of next cache line */ - bdnz 1b - isync - sync - - /* Now flush those cache lines */ - li r3,0x4000 /* 512kB / 32B */ - mtctr r3 - lis r3,KERNELBASE@h -1: - dcbf 0,r3 - addi r3,r3,0x0020 /* Go to start of next cache line */ - bdnz 1b - sync - - /* We can now disable the L1 cache (HID0:DCE, HID0:ICE) */ - mfspr r3,SPRN_HID0 - rlwinm r3,r3,0,18,15 - mtspr SPRN_HID0,r3 - sync - isync - blr - -/* inval_enable_L1 - Invalidate and enable L1 cache - * - * Assumes L1 is already disabled and MSR:EE is off - * - * clobbers r3 - */ -_GLOBAL(__inval_enable_L1) - /* Enable and then Flash inval the instruction & data cache */ - mfspr r3,SPRN_HID0 - ori r3,r3, HID0_ICE|HID0_ICFI|HID0_DCE|HID0_DCI - sync - isync - mtspr SPRN_HID0,r3 - xori r3,r3, HID0_ICFI|HID0_DCI - mtspr SPRN_HID0,r3 - sync - - blr - - |