[PATCH] sh: IRQ handler updates

This moves the various IRQ controller drivers into a new subdirectory, and
also extends the INTC2 IRQ handler to also deal with SH7760 and SH7780
interrupts, rather than just ST-40.

The old CONFIG_SH_GENERIC has also been removed from the IRQ definitions, as
new ports are expected to be based off of CONFIG_SH_UNKNOWN.  Since there are
plenty of incompatible machvecs, CONFIG_SH_GENERIC doesn't make sense anymore.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

5 files changed, 776 insertions, 0 deletions

diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
new file mode 100644
index 0000000..e3cccea
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
+#
+obj-y	+= ipr.o imask.o
+
+obj-$(CONFIG_CPU_HAS_PINT_IRQ)	+= pint.o
+obj-$(CONFIG_CPU_HAS_INTC2_IRQ)	+= intc2.o
diff --git a/arch/sh/kernel/cpu/irq/imask.c b/arch/sh/kernel/cpu/irq/imask.c
new file mode 100644
index 0000000..baed9a5
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/imask.c
@@ -0,0 +1,110 @@
+/*
+ * arch/sh/kernel/cpu/irq/imask.c
+ *
+ * Copyright (C) 1999, 2000  Niibe Yutaka
+ *
+ * Simple interrupt handling using IMASK of SR register.
+ *
+ */
+/* NOTE: Will not work on level 15 */
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/kernel_stat.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <linux/spinlock.h>
+#include <linux/cache.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/irq.h>
+
+/* Bitmap of IRQ masked */
+static unsigned long imask_mask = 0x7fff;
+static int interrupt_priority = 0;
+
+static void enable_imask_irq(unsigned int irq);
+static void disable_imask_irq(unsigned int irq);
+static void shutdown_imask_irq(unsigned int irq);
+static void mask_and_ack_imask(unsigned int);
+static void end_imask_irq(unsigned int irq);
+
+#define IMASK_PRIORITY	15
+
+static unsigned int startup_imask_irq(unsigned int irq)
+{
+	/* Nothing to do */
+	return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type imask_irq_type = {
+	.typename = "SR.IMASK",
+	.startup = startup_imask_irq,
+	.shutdown = shutdown_imask_irq,
+	.enable = enable_imask_irq,
+	.disable = disable_imask_irq,
+	.ack = mask_and_ack_imask,
+	.end = end_imask_irq
+};
+
+void static inline set_interrupt_registers(int ip)
+{
+	unsigned long __dummy;
+
+	asm volatile("ldc	%2, r6_bank\n\t"
+		     "stc	sr, %0\n\t"
+		     "and	#0xf0, %0\n\t"
+		     "shlr2	%0\n\t"
+		     "cmp/eq	#0x3c, %0\n\t"
+		     "bt/s	1f	! CLI-ed\n\t"
+		     " stc	sr, %0\n\t"
+		     "and	%1, %0\n\t"
+		     "or	%2, %0\n\t"
+		     "ldc	%0, sr\n"
+		     "1:"
+		     : "=&z" (__dummy)
+		     : "r" (~0xf0), "r" (ip << 4)
+		     : "t");
+}
+
+static void disable_imask_irq(unsigned int irq)
+{
+	clear_bit(irq, &imask_mask);
+	if (interrupt_priority < IMASK_PRIORITY - irq)
+		interrupt_priority = IMASK_PRIORITY - irq;
+
+	set_interrupt_registers(interrupt_priority);
+}
+
+static void enable_imask_irq(unsigned int irq)
+{
+	set_bit(irq, &imask_mask);
+	interrupt_priority = IMASK_PRIORITY - ffz(imask_mask);
+
+	set_interrupt_registers(interrupt_priority);
+}
+
+static void mask_and_ack_imask(unsigned int irq)
+{
+	disable_imask_irq(irq);
+}
+
+static void end_imask_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_imask_irq(irq);
+}
+
+static void shutdown_imask_irq(unsigned int irq)
+{
+	/* Nothing to do */
+}
+
+void make_imask_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &imask_irq_type;
+	enable_irq(irq);
+}
diff --git a/arch/sh/kernel/cpu/irq/intc2.c b/arch/sh/kernel/cpu/irq/intc2.c
new file mode 100644
index 0000000..06e8afa
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/intc2.c
@@ -0,0 +1,284 @@
+/*
+ * Interrupt handling for INTC2-based IRQ.
+ *
+ * Copyright (C) 2001 David J. Mckay (david.mckay@st.com)
+ * Copyright (C) 2005, 2006 Paul Mundt (lethal@linux-sh.org)
+ *
+ * May be copied or modified under the terms of the GNU General Public
+ * License.  See linux/COPYING for more information.
+ *
+ * These are the "new Hitachi style" interrupts, as present on the
+ * Hitachi 7751, the STM ST40 STB1, SH7760, and SH7780.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+struct intc2_data {
+	unsigned char msk_offset;
+	unsigned char msk_shift;
+
+	int (*clear_irq) (int);
+};
+
+static struct intc2_data intc2_data[NR_INTC2_IRQS];
+
+static void enable_intc2_irq(unsigned int irq);
+static void disable_intc2_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_intc2_irq disable_intc2_irq
+
+static void mask_and_ack_intc2(unsigned int);
+static void end_intc2_irq(unsigned int irq);
+
+static unsigned int startup_intc2_irq(unsigned int irq)
+{
+	enable_intc2_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type intc2_irq_type = {
+	.typename	= "INTC2-IRQ",
+	.startup	= startup_intc2_irq,
+	.shutdown	= shutdown_intc2_irq,
+	.enable		= enable_intc2_irq,
+	.disable	= disable_intc2_irq,
+	.ack		= mask_and_ack_intc2,
+	.end		= end_intc2_irq
+};
+
+static void disable_intc2_irq(unsigned int irq)
+{
+	int irq_offset = irq - INTC2_FIRST_IRQ;
+	int msk_shift, msk_offset;
+
+	/* Sanity check */
+	if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+		return;
+
+	msk_shift = intc2_data[irq_offset].msk_shift;
+	msk_offset = intc2_data[irq_offset].msk_offset;
+
+	ctrl_outl(1 << msk_shift,
+		  INTC2_BASE + INTC2_INTMSK_OFFSET + msk_offset);
+}
+
+static void enable_intc2_irq(unsigned int irq)
+{
+	int irq_offset = irq - INTC2_FIRST_IRQ;
+	int msk_shift, msk_offset;
+
+	/* Sanity check */
+	if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+		return;
+
+	msk_shift = intc2_data[irq_offset].msk_shift;
+	msk_offset = intc2_data[irq_offset].msk_offset;
+
+	ctrl_outl(1 << msk_shift,
+		  INTC2_BASE + INTC2_INTMSKCLR_OFFSET + msk_offset);
+}
+
+static void mask_and_ack_intc2(unsigned int irq)
+{
+	disable_intc2_irq(irq);
+}
+
+static void end_intc2_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_intc2_irq(irq);
+
+	if (unlikely(intc2_data[irq - INTC2_FIRST_IRQ].clear_irq))
+		intc2_data[irq - INTC2_FIRST_IRQ].clear_irq(irq);
+}
+
+/*
+ * Setup an INTC2 style interrupt.
+ * NOTE: Unlike IPR interrupts, parameters are not shifted by this code,
+ * allowing the use of the numbers straight out of the datasheet.
+ * For example:
+ *    PIO1 which is INTPRI00[19,16] and INTMSK00[13]
+ * would be:               ^     ^             ^  ^
+ *                         |     |             |  |
+ *    make_intc2_irq(84,   0,   16,            0, 13);
+ */
+void make_intc2_irq(unsigned int irq,
+		    unsigned int ipr_offset, unsigned int ipr_shift,
+		    unsigned int msk_offset, unsigned int msk_shift,
+		    unsigned int priority)
+{
+	int irq_offset = irq - INTC2_FIRST_IRQ;
+	unsigned int flags;
+	unsigned long ipr;
+
+	if (unlikely(irq_offset < 0 || irq_offset >= NR_INTC2_IRQS))
+		return;
+
+	disable_irq_nosync(irq);
+
+	/* Fill the data we need */
+	intc2_data[irq_offset].msk_offset = msk_offset;
+	intc2_data[irq_offset].msk_shift  = msk_shift;
+	intc2_data[irq_offset].clear_irq = NULL;
+
+	/* Set the priority level */
+	local_irq_save(flags);
+
+	ipr = ctrl_inl(INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
+	ipr &= ~(0xf << ipr_shift);
+	ipr |= priority << ipr_shift;
+	ctrl_outl(ipr, INTC2_BASE + INTC2_INTPRI_OFFSET + ipr_offset);
+
+	local_irq_restore(flags);
+
+	irq_desc[irq].handler = &intc2_irq_type;
+
+	disable_intc2_irq(irq);
+}
+
+static struct intc2_init {
+	unsigned short irq;
+	unsigned char ipr_offset, ipr_shift;
+	unsigned char msk_offset, msk_shift;
+	unsigned char priority;
+} intc2_init_data[]  __initdata = {
+#if defined(CONFIG_CPU_SUBTYPE_ST40)
+	{64,  0,  0, 0,  0, 13},	/* PCI serr */
+	{65,  0,  4, 0,  1, 13},	/* PCI err */
+	{66,  0,  4, 0,  2, 13},	/* PCI ad */
+	{67,  0,  4, 0,  3, 13},	/* PCI pwd down */
+	{72,  0,  8, 0,  5, 13},	/* DMAC INT0 */
+	{73,  0,  8, 0,  6, 13},	/* DMAC INT1 */
+	{74,  0,  8, 0,  7, 13},	/* DMAC INT2 */
+	{75,  0,  8, 0,  8, 13},	/* DMAC INT3 */
+	{76,  0,  8, 0,  9, 13},	/* DMAC INT4 */
+	{78,  0,  8, 0, 11, 13},	/* DMAC ERR */
+	{80,  0, 12, 0, 12, 13},	/* PIO0 */
+	{84,  0, 16, 0, 13, 13},	/* PIO1 */
+	{88,  0, 20, 0, 14, 13},	/* PIO2 */
+	{112, 4,  0, 4,  0, 13},	/* Mailbox */
+ #ifdef CONFIG_CPU_SUBTYPE_ST40GX1
+	{116, 4,  4, 4,  4, 13},	/* SSC0 */
+	{120, 4,  8, 4,  8, 13},	/* IR Blaster */
+	{124, 4, 12, 4, 12, 13},	/* USB host */
+	{128, 4, 16, 4, 16, 13},	/* Video processor BLITTER */
+	{132, 4, 20, 4, 20, 13},	/* UART0 */
+	{134, 4, 20, 4, 22, 13},	/* UART2 */
+	{136, 4, 24, 4, 24, 13},	/* IO_PIO0 */
+	{140, 4, 28, 4, 28, 13},	/* EMPI */
+	{144, 8,  0, 8,  0, 13},	/* MAFE */
+	{148, 8,  4, 8,  4, 13},	/* PWM */
+	{152, 8,  8, 8,  8, 13},	/* SSC1 */
+	{156, 8, 12, 8, 12, 13},	/* IO_PIO1 */
+	{160, 8, 16, 8, 16, 13},	/* USB target */
+	{164, 8, 20, 8, 20, 13},	/* UART1 */
+	{168, 8, 24, 8, 24, 13},	/* Teletext */
+	{172, 8, 28, 8, 28, 13},	/* VideoSync VTG */
+	{173, 8, 28, 8, 29, 13},	/* VideoSync DVP0 */
+	{174, 8, 28, 8, 30, 13},	/* VideoSync DVP1 */
+#endif
+#elif defined(CONFIG_CPU_SUBTYPE_SH7760)
+/*
+ * SH7760 INTC2-Style interrupts, vectors IRQ48-111 INTEVT 0x800-0xFE0
+ */
+	/* INTPRIO0 | INTMSK0 */
+	{48,  0, 28, 0, 31,  3},	/* IRQ 4 */
+	{49,  0, 24, 0, 30,  3},	/* IRQ 3 */
+	{50,  0, 20, 0, 29,  3},	/* IRQ 2 */
+	{51,  0, 16, 0, 28,  3},	/* IRQ 1 */
+	/* 52-55 (INTEVT 0x880-0x8E0) unused/reserved */
+	/* INTPRIO4 | INTMSK0 */
+	{56,  4, 28, 0, 25,  3},	/* HCAN2_CHAN0 */
+	{57,  4, 24, 0, 24,  3},	/* HCAN2_CHAN1 */
+	{58,  4, 20, 0, 23,  3},	/* I2S_CHAN0   */
+	{59,  4, 16, 0, 22,  3},	/* I2S_CHAN1   */
+	{60,  4, 12, 0, 21,  3},	/* AC97_CHAN0  */
+	{61,  4,  8, 0, 20,  3},	/* AC97_CHAN1  */
+	{62,  4,  4, 0, 19,  3},	/* I2C_CHAN0   */
+	{63,  4,  0, 0, 18,  3},	/* I2C_CHAN1   */
+	/* INTPRIO8 | INTMSK0 */
+	{52,  8, 16, 0, 11,  3},	/* SCIF0_ERI_IRQ */
+	{53,  8, 16, 0, 10,  3},	/* SCIF0_RXI_IRQ */
+	{54,  8, 16, 0,  9,  3},	/* SCIF0_BRI_IRQ */
+	{55,  8, 16, 0,  8,  3},	/* SCIF0_TXI_IRQ */
+	{64,  8, 28, 0, 17,  3},	/* USBHI_IRQ */
+	{65,  8, 24, 0, 16,  3},	/* LCDC      */
+	/* 66, 67 unused */
+	{68,  8, 20, 0, 14, 13},	/* DMABRGI0_IRQ */
+	{69,  8, 20, 0, 13, 13},	/* DMABRGI1_IRQ */
+	{70,  8, 20, 0, 12, 13},	/* DMABRGI2_IRQ */
+	/* 71 unused */
+	{72,  8, 12, 0,  7,  3},	/* SCIF1_ERI_IRQ */
+	{73,  8, 12, 0,  6,  3},	/* SCIF1_RXI_IRQ */
+	{74,  8, 12, 0,  5,  3},	/* SCIF1_BRI_IRQ */
+	{75,  8, 12, 0,  4,  3},	/* SCIF1_TXI_IRQ */
+	{76,  8,  8, 0,  3,  3},	/* SCIF2_ERI_IRQ */
+	{77,  8,  8, 0,  2,  3},	/* SCIF2_RXI_IRQ */
+	{78,  8,  8, 0,  1,  3},	/* SCIF2_BRI_IRQ */
+	{79,  8,  8, 0,  0,  3},	/* SCIF2_TXI_IRQ */
+	/*          | INTMSK4 */
+	{80,  8,  4, 4, 23,  3},	/* SIM_ERI */
+	{81,  8,  4, 4, 22,  3},	/* SIM_RXI */
+	{82,  8,  4, 4, 21,  3},	/* SIM_TXI */
+	{83,  8,  4, 4, 20,  3},	/* SIM_TEI */
+	{84,  8,  0, 4, 19,  3},	/* HSPII */
+	/* INTPRIOC | INTMSK4 */
+	/* 85-87 unused/reserved */
+	{88, 12, 20, 4, 18,  3},	/* MMCI0 */
+	{89, 12, 20, 4, 17,  3},	/* MMCI1 */
+	{90, 12, 20, 4, 16,  3},	/* MMCI2 */
+	{91, 12, 20, 4, 15,  3},	/* MMCI3 */
+	{92, 12, 12, 4,  6,  3},	/* MFI (unsure, bug? in my 7760 manual*/
+	/* 93-107 reserved/undocumented */
+	{108,12,  4, 4,  1,  3},	/* ADC  */
+	{109,12,  0, 4,  0,  3},	/* CMTI */
+	/* 110-111 reserved/unused */
+#elif defined(CONFIG_CPU_SUBTYPE_SH7780)
+	{ TIMER_IRQ, 0, 24, 0, INTC_TMU0_MSK, 2},
+#ifdef CONFIG_SH_RTC
+	{ RTC_IRQ, 4, 0, 0, INTC_RTC_MSK, TIMER_PRIORITY },
+#endif
+	{ SCIF0_ERI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+	{ SCIF0_RXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+	{ SCIF0_BRI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+	{ SCIF0_TXI_IRQ, 8, 24, 0, INTC_SCIF0_MSK, SCIF0_PRIORITY },
+
+	{ SCIF1_ERI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+	{ SCIF1_RXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+	{ SCIF1_BRI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+	{ SCIF1_TXI_IRQ, 8, 16, 0, INTC_SCIF1_MSK, SCIF1_PRIORITY },
+
+	{ PCIC0_IRQ, 0x10,  8, 0, INTC_PCIC0_MSK, PCIC0_PRIORITY },
+	{ PCIC1_IRQ, 0x10,  0, 0, INTC_PCIC1_MSK, PCIC1_PRIORITY },
+	{ PCIC2_IRQ, 0x14, 24, 0, INTC_PCIC2_MSK, PCIC2_PRIORITY },
+	{ PCIC3_IRQ, 0x14, 16, 0, INTC_PCIC3_MSK, PCIC3_PRIORITY },
+	{ PCIC4_IRQ, 0x14,  8, 0, INTC_PCIC4_MSK, PCIC4_PRIORITY },
+#endif
+};
+
+void __init init_IRQ_intc2(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(intc2_init_data); i++) {
+		struct intc2_init *p = intc2_init_data + i;
+		make_intc2_irq(p->irq, p->ipr_offset, p->ipr_shift,
+			       p-> msk_offset, p->msk_shift, p->priority);
+	}
+}
+
+/* Adds a termination callback to the interrupt */
+void intc2_add_clear_irq(int irq, int (*fn)(int))
+{
+	if (unlikely(irq < INTC2_FIRST_IRQ))
+		return;
+
+	intc2_data[irq - INTC2_FIRST_IRQ].clear_irq = fn;
+}
+
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
new file mode 100644
index 0000000..fdbd718
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -0,0 +1,206 @@
+/*
+ * arch/sh/kernel/cpu/irq/ipr.c
+ *
+ * Copyright (C) 1999  Niibe Yutaka & Takeshi Yaegashi
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * Interrupt handling for IPR-based IRQ.
+ *
+ * Supported system:
+ *	On-chip supporting modules (TMU, RTC, etc.).
+ *	On-chip supporting modules for SH7709/SH7709A/SH7729/SH7300.
+ *	Hitachi SolutionEngine external I/O:
+ *		MS7709SE01, MS7709ASE01, and MS7750SE01
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+struct ipr_data {
+	unsigned int addr;	/* Address of Interrupt Priority Register */
+	int shift;		/* Shifts of the 16-bit data */
+	int priority;		/* The priority */
+};
+static struct ipr_data ipr_data[NR_IRQS];
+
+static void enable_ipr_irq(unsigned int irq);
+static void disable_ipr_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_ipr_irq disable_ipr_irq
+
+static void mask_and_ack_ipr(unsigned int);
+static void end_ipr_irq(unsigned int irq);
+
+static unsigned int startup_ipr_irq(unsigned int irq)
+{
+	enable_ipr_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type ipr_irq_type = {
+	.typename = "IPR-IRQ",
+	.startup = startup_ipr_irq,
+	.shutdown = shutdown_ipr_irq,
+	.enable = enable_ipr_irq,
+	.disable = disable_ipr_irq,
+	.ack = mask_and_ack_ipr,
+	.end = end_ipr_irq
+};
+
+static void disable_ipr_irq(unsigned int irq)
+{
+	unsigned long val, flags;
+	unsigned int addr = ipr_data[irq].addr;
+	unsigned short mask = 0xffff ^ (0x0f << ipr_data[irq].shift);
+
+	/* Set the priority in IPR to 0 */
+	local_irq_save(flags);
+	val = ctrl_inw(addr);
+	val &= mask;
+	ctrl_outw(val, addr);
+	local_irq_restore(flags);
+}
+
+static void enable_ipr_irq(unsigned int irq)
+{
+	unsigned long val, flags;
+	unsigned int addr = ipr_data[irq].addr;
+	int priority = ipr_data[irq].priority;
+	unsigned short value = (priority << ipr_data[irq].shift);
+
+	/* Set priority in IPR back to original value */
+	local_irq_save(flags);
+	val = ctrl_inw(addr);
+	val |= value;
+	ctrl_outw(val, addr);
+	local_irq_restore(flags);
+}
+
+static void mask_and_ack_ipr(unsigned int irq)
+{
+	disable_ipr_irq(irq);
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/* This is needed when we use edge triggered setting */
+	/* XXX: Is it really needed? */
+	if (IRQ0_IRQ <= irq && irq <= IRQ5_IRQ) {
+		/* Clear external interrupt request */
+		int a = ctrl_inb(INTC_IRR0);
+		a &= ~(1 << (irq - IRQ0_IRQ));
+		ctrl_outb(a, INTC_IRR0);
+	}
+#endif
+}
+
+static void end_ipr_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_ipr_irq(irq);
+}
+
+void make_ipr_irq(unsigned int irq, unsigned int addr, int pos,
+		  int priority, int maskpos)
+{
+	disable_irq_nosync(irq);
+	ipr_data[irq].addr = addr;
+	ipr_data[irq].shift = pos*4; /* POSition (0-3) x 4 means shift */
+	ipr_data[irq].priority = priority;
+
+	irq_desc[irq].handler = &ipr_irq_type;
+	disable_ipr_irq(irq);
+}
+
+void __init init_IRQ(void)
+{
+#ifndef CONFIG_CPU_SUBTYPE_SH7780
+	make_ipr_irq(TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY, 0);
+	make_ipr_irq(TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY, 0);
+#if defined(CONFIG_SH_RTC)
+	make_ipr_irq(RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY, 0);
+#endif
+
+#ifdef SCI_ERI_IRQ
+	make_ipr_irq(SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+	make_ipr_irq(SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+	make_ipr_irq(SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY, 0);
+#endif
+
+#ifdef SCIF1_ERI_IRQ
+	make_ipr_irq(SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+	make_ipr_irq(SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+	make_ipr_irq(SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+	make_ipr_irq(SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY, 0);
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7300)
+	make_ipr_irq(SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY, 0);
+	make_ipr_irq(DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
+	make_ipr_irq(DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY, 0);
+	make_ipr_irq(VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY, 0);
+#endif
+
+#ifdef SCIF_ERI_IRQ
+	make_ipr_irq(SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+	make_ipr_irq(SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+	make_ipr_irq(SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+	make_ipr_irq(SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY, 0);
+#endif
+
+#ifdef IRDA_ERI_IRQ
+	make_ipr_irq(IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+	make_ipr_irq(IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+	make_ipr_irq(IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+	make_ipr_irq(IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY, 0);
+#endif
+
+#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
+    defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
+	/*
+	 * Initialize the Interrupt Controller (INTC)
+	 * registers to their power on values
+	 */
+
+	/*
+	 * Enable external irq (INTC IRQ mode).
+	 * You should set corresponding bits of PFC to "00"
+	 * to enable these interrupts.
+	 */
+	make_ipr_irq(IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY, 0);
+	make_ipr_irq(IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY, 0);
+	make_ipr_irq(IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY, 0);
+	make_ipr_irq(IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY, 0);
+	make_ipr_irq(IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY, 0);
+	make_ipr_irq(IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY, 0);
+#endif
+#endif
+
+#ifdef CONFIG_CPU_HAS_PINT_IRQ
+	init_IRQ_pint();
+#endif
+
+#ifdef CONFIG_CPU_HAS_INTC2_IRQ
+	init_IRQ_intc2();
+#endif
+	/* Perform the machine specific initialisation */
+	if (sh_mv.mv_init_irq != NULL)
+		sh_mv.mv_init_irq();
+}
+
+#if !defined(CONFIG_CPU_HAS_PINT_IRQ)
+int ipr_irq_demux(int irq)
+{
+	return irq;
+}
+#endif
+
+EXPORT_SYMBOL(make_ipr_irq);
diff --git a/arch/sh/kernel/cpu/irq/pint.c b/arch/sh/kernel/cpu/irq/pint.c
new file mode 100644
index 0000000..95d6024
--- /dev/null
+++ b/arch/sh/kernel/cpu/irq/pint.c
@@ -0,0 +1,169 @@
+/*
+ * arch/sh/kernel/cpu/irq/pint.c - Interrupt handling for PINT-based IRQs.
+ *
+ * Copyright (C) 1999  Niibe Yutaka & Takeshi Yaegashi
+ * Copyright (C) 2000  Kazumoto Kojima
+ * Copyright (C) 2003 Takashi Kusuda <kusuda-takashi@hitachi-ul.co.jp>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+static unsigned char pint_map[256];
+static unsigned long portcr_mask;
+
+static void enable_pint_irq(unsigned int irq);
+static void disable_pint_irq(unsigned int irq);
+
+/* shutdown is same as "disable" */
+#define shutdown_pint_irq disable_pint_irq
+
+static void mask_and_ack_pint(unsigned int);
+static void end_pint_irq(unsigned int irq);
+
+static unsigned int startup_pint_irq(unsigned int irq)
+{
+	enable_pint_irq(irq);
+	return 0; /* never anything pending */
+}
+
+static struct hw_interrupt_type pint_irq_type = {
+	.typename = "PINT-IRQ",
+	.startup = startup_pint_irq,
+	.shutdown = shutdown_pint_irq,
+	.enable = enable_pint_irq,
+	.disable = disable_pint_irq,
+	.ack = mask_and_ack_pint,
+	.end = end_pint_irq
+};
+
+static void disable_pint_irq(unsigned int irq)
+{
+	unsigned long val, flags;
+
+	local_irq_save(flags);
+	val = ctrl_inw(INTC_INTER);
+	val &= ~(1 << (irq - PINT_IRQ_BASE));
+	ctrl_outw(val, INTC_INTER);	/* disable PINTn */
+	portcr_mask &= ~(3 << (irq - PINT_IRQ_BASE)*2);
+	local_irq_restore(flags);
+}
+
+static void enable_pint_irq(unsigned int irq)
+{
+	unsigned long val, flags;
+
+	local_irq_save(flags);
+	val = ctrl_inw(INTC_INTER);
+	val |= 1 << (irq - PINT_IRQ_BASE);
+	ctrl_outw(val, INTC_INTER);	/* enable PINTn */
+	portcr_mask |= 3 << (irq - PINT_IRQ_BASE)*2;
+	local_irq_restore(flags);
+}
+
+static void mask_and_ack_pint(unsigned int irq)
+{
+	disable_pint_irq(irq);
+}
+
+static void end_pint_irq(unsigned int irq)
+{
+	if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
+		enable_pint_irq(irq);
+}
+
+void make_pint_irq(unsigned int irq)
+{
+	disable_irq_nosync(irq);
+	irq_desc[irq].handler = &pint_irq_type;
+	disable_pint_irq(irq);
+}
+
+void __init init_IRQ_pint(void)
+{
+	int i;
+
+	make_ipr_irq(PINT0_IRQ, PINT0_IPR_ADDR, PINT0_IPR_POS, PINT0_PRIORITY);
+	make_ipr_irq(PINT8_IRQ, PINT8_IPR_ADDR, PINT8_IPR_POS, PINT8_PRIORITY);
+
+	enable_irq(PINT0_IRQ);
+	enable_irq(PINT8_IRQ);
+
+	for(i = 0; i < 16; i++)
+		make_pint_irq(PINT_IRQ_BASE + i);
+
+	for(i = 0; i < 256; i++) {
+		if (i & 1)
+			pint_map[i] = 0;
+		else if (i & 2)
+			pint_map[i] = 1;
+		else if (i & 4)
+			pint_map[i] = 2;
+		else if (i & 8)
+			pint_map[i] = 3;
+		else if (i & 0x10)
+			pint_map[i] = 4;
+		else if (i & 0x20)
+			pint_map[i] = 5;
+		else if (i & 0x40)
+			pint_map[i] = 6;
+		else if (i & 0x80)
+			pint_map[i] = 7;
+	}
+}
+
+int ipr_irq_demux(int irq)
+{
+	unsigned long creg, dreg, d, sav;
+
+	if (irq == PINT0_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+		creg = PORT_PACR;
+		dreg = PORT_PADR;
+#else
+		creg = PORT_PCCR;
+		dreg = PORT_PCDR;
+#endif
+		sav = ctrl_inw(creg);
+		ctrl_outw(sav | portcr_mask, creg);
+		d = (~ctrl_inb(dreg) ^ ctrl_inw(INTC_ICR2)) &
+			ctrl_inw(INTC_INTER) & 0xff;
+		ctrl_outw(sav, creg);
+
+		if (d == 0)
+			return irq;
+
+		return PINT_IRQ_BASE + pint_map[d];
+	} else if (irq == PINT8_IRQ) {
+#if defined(CONFIG_CPU_SUBTYPE_SH7707)
+		creg = PORT_PBCR;
+		dreg = PORT_PBDR;
+#else
+		creg = PORT_PFCR;
+		dreg = PORT_PFDR;
+#endif
+		sav = ctrl_inw(creg);
+		ctrl_outw(sav | (portcr_mask >> 16), creg);
+		d = (~ctrl_inb(dreg) ^ (ctrl_inw(INTC_ICR2) >> 8)) &
+			(ctrl_inw(INTC_INTER) >> 8) & 0xff;
+		ctrl_outw(sav, creg);
+
+		if (d == 0)
+			return irq;
+
+		return PINT_IRQ_BASE + 8 + pint_map[d];
+	}
+
+	return irq;
+}
+