sh: sh775x/titan fixes for irq header changes.

The following moves the creation of IPR interupts into setup-7750.c
and updates a few other things to make it all work after the "Drop
CPU subtype IRQ headers" commit. It boots and runs fine on my titan
board.

 - adds an ipr_idx to the ipr_data and uses a function in the subtype
   code to calculate the address of the IPR registers

 - adds a function to enable individual interrupt mode for externals
   in the subtype code and calls that from the titan board code
   instead of doing it directly.

 - I changed the shift in the ipr_data to be the actual # of bits to
   shift, instead of the numnber / 4 - made it easier to match with
   the manual.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

2 files changed, 8 insertions, 98 deletions

diff --git a/arch/sh/kernel/cpu/irq/Makefile b/arch/sh/kernel/cpu/irq/Makefile
index 1c034c2..0049d21 100644
--- a/arch/sh/kernel/cpu/irq/Makefile
+++ b/arch/sh/kernel/cpu/irq/Makefile
@@ -1,8 +1,9 @@
 #
 # Makefile for the Linux/SuperH CPU-specifc IRQ handlers.
 #
-obj-y	+= ipr.o imask.o
+obj-y	+= imask.o
 
+obj-$(CONFIG_CPU_HAS_IPR_IRQ)		+= ipr.o
 obj-$(CONFIG_CPU_HAS_PINT_IRQ)		+= pint.o
 obj-$(CONFIG_CPU_HAS_MASKREG_IRQ)	+= maskreg.o
 obj-$(CONFIG_CPU_HAS_INTC2_IRQ)		+= intc2.o
diff --git a/arch/sh/kernel/cpu/irq/ipr.c b/arch/sh/kernel/cpu/irq/ipr.c
index a181ccd..35eb575 100644
--- a/arch/sh/kernel/cpu/irq/ipr.c
+++ b/arch/sh/kernel/cpu/irq/ipr.c
@@ -25,17 +25,15 @@
 static void disable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
-	int shift = p->shift*4;
 	/* Set the priority in IPR to 0 */
-	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << shift)), p->addr);
+	ctrl_outw(ctrl_inw(p->addr) & (0xffff ^ (0xf << p->shift)), p->addr);
 }
 
 static void enable_ipr_irq(unsigned int irq)
 {
 	struct ipr_data *p = get_irq_chip_data(irq);
-	int shift = p->shift*4;
 	/* Set priority in IPR back to original value */
-	ctrl_outw(ctrl_inw(p->addr) | (p->priority << shift), p->addr);
+	ctrl_outw(ctrl_inw(p->addr) | (p->priority << p->shift), p->addr);
 }
 
 static struct irq_chip ipr_irq_chip = {
@@ -51,6 +49,10 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
 
 	for (i = 0; i < nr_irqs; i++) {
 		unsigned int irq = table[i].irq;
+		table[i].addr = map_ipridx_to_addr(table[i].ipr_idx);
+		/* could the IPR index be mapped, if not we ignore this */
+		if (table[i].addr == 0)
+			continue;
 		disable_irq_nosync(irq);
 		set_irq_chip_and_handler_name(irq, &ipr_irq_chip,
 				      handle_level_irq, "level");
@@ -60,99 +62,6 @@ void make_ipr_irq(struct ipr_data *table, unsigned int nr_irqs)
 }
 EXPORT_SYMBOL(make_ipr_irq);
 
-/*
- * XXX: Move this garbage in to the drivers, and kill off the ridiculous CPU
- * subtype checks.
- */
-static struct ipr_data sys_ipr_map[] = {
-#ifndef CONFIG_CPU_SUBTYPE_SH7780
-	{ TIMER_IRQ, TIMER_IPR_ADDR, TIMER_IPR_POS, TIMER_PRIORITY },
-	{ TIMER1_IRQ, TIMER1_IPR_ADDR, TIMER1_IPR_POS, TIMER1_PRIORITY },
-#ifdef RTC_IRQ
-	{ RTC_IRQ, RTC_IPR_ADDR, RTC_IPR_POS, RTC_PRIORITY },
-#endif
-#ifdef SCI_ERI_IRQ
-	{ SCI_ERI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-	{ SCI_RXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-	{ SCI_TXI_IRQ, SCI_IPR_ADDR, SCI_IPR_POS, SCI_PRIORITY },
-#endif
-#ifdef SCIF1_ERI_IRQ
-	{ SCIF1_ERI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_RXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_BRI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-	{ SCIF1_TXI_IRQ, SCIF1_IPR_ADDR, SCIF1_IPR_POS, SCIF1_PRIORITY },
-#endif
-#ifdef SCIF2_ERI_IRQ
-	{ SCIF2_ERI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-	{ SCIF2_RXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-	{ SCIF2_BRI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-	{ SCIF2_TXI_IRQ, SCIF2_IPR_ADDR, SCIF2_IPR_POS, SCIF2_PRIORITY },
-#endif
-#ifdef SCIF3_ERI_IRQ
-	{ SCIF3_ERI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-	{ SCIF3_RXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-	{ SCIF3_BRI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-	{ SCIF3_TXI_IRQ, SCIF3_IPR_ADDR, SCIF3_IPR_POS, SCIF3_PRIORITY },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7300)
-	{ SCIF0_IRQ, SCIF0_IPR_ADDR, SCIF0_IPR_POS, SCIF0_PRIORITY },
-	{ DMTE2_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ DMTE3_IRQ, DMA1_IPR_ADDR, DMA1_IPR_POS, DMA1_PRIORITY },
-	{ VIO_IRQ, VIO_IPR_ADDR, VIO_IPR_POS, VIO_PRIORITY },
-#endif
-#ifdef SCIF_ERI_IRQ
-	{ SCIF_ERI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_RXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_BRI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-	{ SCIF_TXI_IRQ, SCIF_IPR_ADDR, SCIF_IPR_POS, SCIF_PRIORITY },
-#endif
-#ifdef IRDA_ERI_IRQ
-	{ IRDA_ERI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_RXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_BRI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-	{ IRDA_TXI_IRQ, IRDA_IPR_ADDR, IRDA_IPR_POS, IRDA_PRIORITY },
-#endif
-#if defined(CONFIG_CPU_SUBTYPE_SH7707) || defined(CONFIG_CPU_SUBTYPE_SH7709) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7706) || \
-    defined(CONFIG_CPU_SUBTYPE_SH7300) || defined(CONFIG_CPU_SUBTYPE_SH7705)
-	/*
-	 * Initialize the Interrupt Controller (INTC)
-	 * registers to their power on values
-	 */
-
-	/*
-	 * Enable external irq (INTC IRQ mode).
-	 * You should set corresponding bits of PFC to "00"
-	 * to enable these interrupts.
-	 */
-	{ IRQ0_IRQ, IRQ0_IPR_ADDR, IRQ0_IPR_POS, IRQ0_PRIORITY },
-	{ IRQ1_IRQ, IRQ1_IPR_ADDR, IRQ1_IPR_POS, IRQ1_PRIORITY },
-	{ IRQ2_IRQ, IRQ2_IPR_ADDR, IRQ2_IPR_POS, IRQ2_PRIORITY },
-	{ IRQ3_IRQ, IRQ3_IPR_ADDR, IRQ3_IPR_POS, IRQ3_PRIORITY },
-	{ IRQ4_IRQ, IRQ4_IPR_ADDR, IRQ4_IPR_POS, IRQ4_PRIORITY },
-	{ IRQ5_IRQ, IRQ5_IPR_ADDR, IRQ5_IPR_POS, IRQ5_PRIORITY },
-#endif
-#endif
-};
-
-void __init init_IRQ(void)
-{
-	make_ipr_irq(sys_ipr_map, ARRAY_SIZE(sys_ipr_map));
-
-#ifdef CONFIG_CPU_HAS_PINT_IRQ
-	init_IRQ_pint();
-#endif
-
-#ifdef CONFIG_CPU_HAS_INTC2_IRQ
-	init_IRQ_intc2();
-#endif
-	/* Perform the machine specific initialisation */
-	if (sh_mv.mv_init_irq != NULL)
-		sh_mv.mv_init_irq();
-
-	irq_ctx_init(smp_processor_id());
-}
-
 #if !defined(CONFIG_CPU_HAS_PINT_IRQ)
 int ipr_irq_demux(int irq)
 {