arch/tile: common DMA code for the GXIO IORPC subsystem

The dma_queue support is used by both the mPipe (networking)
and Trio (PCI) hardware shims on tilegx.  This common code is
selected when either of those drivers is built.

Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>

1 files changed, 176 insertions, 0 deletions

diff --git a/arch/tile/gxio/dma_queue.c b/arch/tile/gxio/dma_queue.c
new file mode 100644
index 0000000..baa6035
--- /dev/null
+++ b/arch/tile/gxio/dma_queue.c
@@ -0,0 +1,176 @@
+/*
+ * Copyright 2012 Tilera Corporation. All Rights Reserved.
+ *
+ *   This program is free software; you can redistribute it and/or
+ *   modify it under the terms of the GNU General Public License
+ *   as published by the Free Software Foundation, version 2.
+ *
+ *   This program is distributed in the hope that it will be useful, but
+ *   WITHOUT ANY WARRANTY; without even the implied warranty of
+ *   MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ *   NON INFRINGEMENT.  See the GNU General Public License for
+ *   more details.
+ */
+
+#include <linux/io.h>
+#include <linux/atomic.h>
+#include <linux/module.h>
+#include <gxio/dma_queue.h>
+
+/* Wait for a memory read to complete. */
+#define wait_for_value(val)                             \
+  __asm__ __volatile__("move %0, %0" :: "r"(val))
+
+/* The index is in the low 16. */
+#define DMA_QUEUE_INDEX_MASK ((1 << 16) - 1)
+
+/*
+ * The hardware descriptor-ring type.
+ * This matches the types used by mpipe (MPIPE_EDMA_POST_REGION_VAL_t)
+ * and trio (TRIO_PUSH_DMA_REGION_VAL_t or TRIO_PULL_DMA_REGION_VAL_t).
+ * See those types for more documentation on the individual fields.
+ */
+typedef union {
+	struct {
+#ifndef __BIG_ENDIAN__
+		uint64_t ring_idx:16;
+		uint64_t count:16;
+		uint64_t gen:1;
+		uint64_t __reserved:31;
+#else
+		uint64_t __reserved:31;
+		uint64_t gen:1;
+		uint64_t count:16;
+		uint64_t ring_idx:16;
+#endif
+	};
+	uint64_t word;
+} __gxio_ring_t;
+
+void __gxio_dma_queue_init(__gxio_dma_queue_t *dma_queue,
+			   void *post_region_addr, unsigned int num_entries)
+{
+	/*
+	 * Limit 65536 entry rings to 65535 credits because we only have a
+	 * 16 bit completion counter.
+	 */
+	int64_t credits = (num_entries < 65536) ? num_entries : 65535;
+
+	memset(dma_queue, 0, sizeof(*dma_queue));
+
+	dma_queue->post_region_addr = post_region_addr;
+	dma_queue->hw_complete_count = 0;
+	dma_queue->credits_and_next_index = credits << DMA_QUEUE_CREDIT_SHIFT;
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_init);
+
+void __gxio_dma_queue_update_credits(__gxio_dma_queue_t *dma_queue)
+{
+	__gxio_ring_t val;
+	uint64_t count;
+	uint64_t delta;
+	uint64_t new_count;
+
+	/*
+	 * Read the 64-bit completion count without touching the cache, so
+	 * we later avoid having to evict any sharers of this cache line
+	 * when we update it below.
+	 */
+	uint64_t orig_hw_complete_count =
+		cmpxchg(&dma_queue->hw_complete_count,
+			-1, -1);
+
+	/* Make sure the load completes before we access the hardware. */
+	wait_for_value(orig_hw_complete_count);
+
+	/* Read the 16-bit count of how many packets it has completed. */
+	val.word = __gxio_mmio_read(dma_queue->post_region_addr);
+	count = val.count;
+
+	/*
+	 * Calculate the number of completions since we last updated the
+	 * 64-bit counter.  It's safe to ignore the high bits because the
+	 * maximum credit value is 65535.
+	 */
+	delta = (count - orig_hw_complete_count) & 0xffff;
+	if (delta == 0)
+		return;
+
+	/*
+	 * Try to write back the count, advanced by delta.  If we race with
+	 * another thread, this might fail, in which case we return
+	 * immediately on the assumption that some credits are (or at least
+	 * were) available.
+	 */
+	new_count = orig_hw_complete_count + delta;
+	if (cmpxchg(&dma_queue->hw_complete_count,
+		    orig_hw_complete_count,
+		    new_count) != orig_hw_complete_count)
+		return;
+
+	/*
+	 * We succeeded in advancing the completion count; add back the
+	 * corresponding number of egress credits.
+	 */
+	__insn_fetchadd(&dma_queue->credits_and_next_index,
+			(delta << DMA_QUEUE_CREDIT_SHIFT));
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_update_credits);
+
+/*
+ * A separate 'blocked' method for put() so that backtraces and
+ * profiles will clearly indicate that we're wasting time spinning on
+ * egress availability rather than actually posting commands.
+ */
+int64_t __gxio_dma_queue_wait_for_credits(__gxio_dma_queue_t *dma_queue,
+					  int64_t modifier)
+{
+	int backoff = 16;
+	int64_t old;
+
+	do {
+		int i;
+		/* Back off to avoid spamming memory networks. */
+		for (i = backoff; i > 0; i--)
+			__insn_mfspr(SPR_PASS);
+
+		/* Check credits again. */
+		__gxio_dma_queue_update_credits(dma_queue);
+		old = __insn_fetchaddgez(&dma_queue->credits_and_next_index,
+					 modifier);
+
+		/* Calculate bounded exponential backoff for next iteration. */
+		if (backoff < 256)
+			backoff *= 2;
+	} while (old + modifier < 0);
+
+	return old;
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_wait_for_credits);
+
+int64_t __gxio_dma_queue_reserve_aux(__gxio_dma_queue_t *dma_queue,
+				     unsigned int num, int wait)
+{
+	return __gxio_dma_queue_reserve(dma_queue, num, wait != 0, true);
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_reserve_aux);
+
+int __gxio_dma_queue_is_complete(__gxio_dma_queue_t *dma_queue,
+				 int64_t completion_slot, int update)
+{
+	if (update) {
+		if (ACCESS_ONCE(dma_queue->hw_complete_count) >
+		    completion_slot)
+			return 1;
+
+		__gxio_dma_queue_update_credits(dma_queue);
+	}
+
+	return ACCESS_ONCE(dma_queue->hw_complete_count) > completion_slot;
+}
+
+EXPORT_SYMBOL_GPL(__gxio_dma_queue_is_complete);