Merge tag 'v3.5-rc7' into arm/tegra

This solves the merge conflicts while creating the next
branch.

Linux 3.5-rc7

Conflicts:
	drivers/iommu/tegra-smmu.c

6 files changed, 83 insertions, 26 deletions

diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c
index 8afb693..b2297e5 100644
--- a/arch/x86/kernel/acpi/boot.c
+++ b/arch/x86/kernel/acpi/boot.c
@@ -422,12 +422,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
 		return 0;
 	}
 
-	if (intsrc->source_irq == 0 && intsrc->global_irq == 2) {
+	if (intsrc->source_irq == 0) {
 		if (acpi_skip_timer_override) {
-			printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
+			printk(PREFIX "BIOS IRQ0 override ignored.\n");
 			return 0;
 		}
-		if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
+
+		if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
+			&& (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
 			intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
 			printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
 		}
@@ -1334,17 +1336,12 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d)
 }
 
 /*
- * Force ignoring BIOS IRQ0 pin2 override
+ * Force ignoring BIOS IRQ0 override
  */
 static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
 {
-	/*
-	 * The ati_ixp4x0_rev() early PCI quirk should have set
-	 * the acpi_skip_timer_override flag already:
-	 */
 	if (!acpi_skip_timer_override) {
-		WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n");
-		pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n",
+		pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
 			d->ident);
 		acpi_skip_timer_override = 1;
 	}
@@ -1438,7 +1435,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
 	 * is enabled.  This input is incorrectly designated the
 	 * ISA IRQ 0 via an interrupt source override even though
 	 * it is wired to the output of the master 8259A and INTIN0
-	 * is not connected at all.  Force ignoring BIOS IRQ0 pin2
+	 * is not connected at all.  Force ignoring BIOS IRQ0
 	 * override in that cases.
 	 */
 	{
@@ -1473,6 +1470,14 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
 		     },
 	 },
+	{
+	 .callback = dmi_ignore_irq0_timer_override,
+	 .ident = "FUJITSU SIEMENS",
+	 .matches = {
+		     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+		     DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+		     },
+	 },
 	{}
 };
 
diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl
index dfea390..c7b3fe2 100644
--- a/arch/x86/kernel/cpu/mkcapflags.pl
+++ b/arch/x86/kernel/cpu/mkcapflags.pl
@@ -1,4 +1,4 @@
-#!/usr/bin/perl
+#!/usr/bin/perl -w
 #
 # Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h
 #
@@ -11,22 +11,35 @@ open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n";
 print OUT "#include <asm/cpufeature.h>\n\n";
 print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n";
 
+%features = ();
+$err = 0;
+
 while (defined($line = <IN>)) {
 	if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) {
 		$macro = $1;
-		$feature = $2;
+		$feature = "\L$2";
 		$tail = $3;
 		if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) {
-			$feature = $1;
+			$feature = "\L$1";
 		}
 
-		if ($feature ne '') {
-			printf OUT "\t%-32s = \"%s\",\n",
-				"[$macro]", "\L$feature";
+		next if ($feature eq '');
+
+		if ($features{$feature}++) {
+			print STDERR "$in: duplicate feature name: $feature\n";
+			$err++;
 		}
+		printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature;
 	}
 }
 print OUT "};\n";
 
 close(IN);
 close(OUT);
+
+if ($err) {
+	unlink($out);
+	exit(1);
+}
+
+exit(0);
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index addf9e8..ee8e9ab 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -31,7 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c)
 	const struct cpuid_bit *cb;
 
 	static const struct cpuid_bit __cpuinitconst cpuid_bits[] = {
-		{ X86_FEATURE_DTS,		CR_EAX, 0, 0x00000006, 0 },
+		{ X86_FEATURE_DTHERM,		CR_EAX, 0, 0x00000006, 0 },
 		{ X86_FEATURE_IDA,		CR_EAX, 1, 0x00000006, 0 },
 		{ X86_FEATURE_ARAT,		CR_EAX, 2, 0x00000006, 0 },
 		{ X86_FEATURE_PLN,		CR_EAX, 4, 0x00000006, 0 },
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index 8bfb614..3f61904 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -444,12 +444,12 @@ void kgdb_roundup_cpus(unsigned long flags)
 
 /**
  *	kgdb_arch_handle_exception - Handle architecture specific GDB packets.
- *	@vector: The error vector of the exception that happened.
+ *	@e_vector: The error vector of the exception that happened.
  *	@signo: The signal number of the exception that happened.
  *	@err_code: The error code of the exception that happened.
- *	@remcom_in_buffer: The buffer of the packet we have read.
- *	@remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into.
- *	@regs: The &struct pt_regs of the current process.
+ *	@remcomInBuffer: The buffer of the packet we have read.
+ *	@remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into.
+ *	@linux_regs: The &struct pt_regs of the current process.
  *
  *	This function MUST handle the 'c' and 's' command packets,
  *	as well packets to set / remove a hardware breakpoint, if used.
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 25b48ed..5de92f1 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -451,6 +451,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"),
 		},
 	},
+	{	/* Handle problems with rebooting on the Precision M6600. */
+		.callback = set_pci_reboot,
+		.ident = "Dell OptiPlex 990",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c
index 7515cf0..5db36ca 100644
--- a/arch/x86/kernel/vsyscall_64.c
+++ b/arch/x86/kernel/vsyscall_64.c
@@ -139,6 +139,19 @@ static int addr_to_vsyscall_nr(unsigned long addr)
 	return nr;
 }
 
+#ifdef CONFIG_SECCOMP
+static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr)
+{
+	if (!seccomp_mode(&tsk->seccomp))
+		return 0;
+	task_pt_regs(tsk)->orig_ax = syscall_nr;
+	task_pt_regs(tsk)->ax = syscall_nr;
+	return __secure_computing(syscall_nr);
+}
+#else
+#define vsyscall_seccomp(_tsk, _nr) 0
+#endif
+
 static bool write_ok_or_segv(unsigned long ptr, size_t size)
 {
 	/*
@@ -174,6 +187,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	int vsyscall_nr;
 	int prev_sig_on_uaccess_error;
 	long ret;
+	int skip;
 
 	/*
 	 * No point in checking CS -- the only way to get here is a user mode
@@ -205,9 +219,6 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	}
 
 	tsk = current;
-	if (seccomp_mode(&tsk->seccomp))
-		do_exit(SIGKILL);
-
 	/*
 	 * With a real vsyscall, page faults cause SIGSEGV.  We want to
 	 * preserve that behavior to make writing exploits harder.
@@ -222,8 +233,13 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 	 * address 0".
 	 */
 	ret = -EFAULT;
+	skip = 0;
 	switch (vsyscall_nr) {
 	case 0:
+		skip = vsyscall_seccomp(tsk, __NR_gettimeofday);
+		if (skip)
+			break;
+
 		if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) ||
 		    !write_ok_or_segv(regs->si, sizeof(struct timezone)))
 			break;
@@ -234,6 +250,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 		break;
 
 	case 1:
+		skip = vsyscall_seccomp(tsk, __NR_time);
+		if (skip)
+			break;
+
 		if (!write_ok_or_segv(regs->di, sizeof(time_t)))
 			break;
 
@@ -241,6 +261,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 		break;
 
 	case 2:
+		skip = vsyscall_seccomp(tsk, __NR_getcpu);
+		if (skip)
+			break;
+
 		if (!write_ok_or_segv(regs->di, sizeof(unsigned)) ||
 		    !write_ok_or_segv(regs->si, sizeof(unsigned)))
 			break;
@@ -253,6 +277,12 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 
 	current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error;
 
+	if (skip) {
+		if ((long)regs->ax <= 0L) /* seccomp errno emulation */
+			goto do_ret;
+		goto done; /* seccomp trace/trap */
+	}
+
 	if (ret == -EFAULT) {
 		/* Bad news -- userspace fed a bad pointer to a vsyscall. */
 		warn_bad_vsyscall(KERN_INFO, regs,
@@ -271,10 +301,11 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address)
 
 	regs->ax = ret;
 
+do_ret:
 	/* Emulate a ret instruction. */
 	regs->ip = caller;
 	regs->sp += 8;
-
+done:
 	return true;
 
 sigsegv: