diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/x86_64/pci | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/x86_64/pci')
-rw-r--r-- | arch/x86_64/pci/Makefile | 24 | ||||
-rw-r--r-- | arch/x86_64/pci/Makefile-BUS | 22 | ||||
-rw-r--r-- | arch/x86_64/pci/k8-bus.c | 78 | ||||
-rw-r--r-- | arch/x86_64/pci/mmconfig.c | 104 |
4 files changed, 228 insertions, 0 deletions
diff --git a/arch/x86_64/pci/Makefile b/arch/x86_64/pci/Makefile new file mode 100644 index 0000000..37c92e8 --- /dev/null +++ b/arch/x86_64/pci/Makefile @@ -0,0 +1,24 @@ +# +# Makefile for X86_64 specific PCI routines +# +# Reuse the i386 PCI subsystem +# +CFLAGS += -Iarch/i386/pci + +obj-y := i386.o +obj-$(CONFIG_PCI_DIRECT)+= direct.o +obj-y += fixup.o +obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-y += legacy.o irq.o common.o +# mmconfig has a 64bit special +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o + +obj-$(CONFIG_NUMA) += k8-bus.o + +direct-y += ../../i386/pci/direct.o +acpi-y += ../../i386/pci/acpi.o +legacy-y += ../../i386/pci/legacy.o +irq-y += ../../i386/pci/irq.o +common-y += ../../i386/pci/common.o +fixup-y += ../../i386/pci/fixup.o +i386-y += ../../i386/pci/i386.o diff --git a/arch/x86_64/pci/Makefile-BUS b/arch/x86_64/pci/Makefile-BUS new file mode 100644 index 0000000..291985f --- /dev/null +++ b/arch/x86_64/pci/Makefile-BUS @@ -0,0 +1,22 @@ +# +# Makefile for X86_64 specific PCI routines +# +# Reuse the i386 PCI subsystem +# +CFLAGS += -I arch/i386/pci + +obj-y := i386.o +obj-$(CONFIG_PCI_DIRECT)+= direct.o +obj-y += fixup.o +obj-$(CONFIG_ACPI_PCI) += acpi.o +obj-y += legacy.o irq.o common.o +# mmconfig has a 64bit special +obj-$(CONFIG_PCI_MMCONFIG) += mmconfig.o + +direct-y += ../../i386/pci/direct.o +acpi-y += ../../i386/pci/acpi.o +legacy-y += ../../i386/pci/legacy.o +irq-y += ../../i386/pci/irq.o +common-y += ../../i386/pci/common.o +fixup-y += ../../i386/pci/fixup.o +i386-y += ../../i386/pci/i386.o diff --git a/arch/x86_64/pci/k8-bus.c b/arch/x86_64/pci/k8-bus.c new file mode 100644 index 0000000..62349c7 --- /dev/null +++ b/arch/x86_64/pci/k8-bus.c @@ -0,0 +1,78 @@ +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/mpspec.h> +#include <linux/cpumask.h> + +/* + * This discovers the pcibus <-> node mapping on AMD K8. + * + * RED-PEN need to call this again on PCI hotplug + * RED-PEN empty cpus get reported wrong + */ + +#define NODE_ID_REGISTER 0x60 +#define NODE_ID(dword) (dword & 0x07) +#define LDT_BUS_NUMBER_REGISTER_0 0x94 +#define LDT_BUS_NUMBER_REGISTER_1 0xB4 +#define LDT_BUS_NUMBER_REGISTER_2 0xD4 +#define NR_LDT_BUS_NUMBER_REGISTERS 3 +#define SECONDARY_LDT_BUS_NUMBER(dword) ((dword >> 8) & 0xFF) +#define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) +#define PCI_DEVICE_ID_K8HTCONFIG 0x1100 + +/** + * fill_mp_bus_to_cpumask() + * fills the mp_bus_to_cpumask array based according to the LDT Bus Number + * Registers found in the K8 northbridge + */ +__init static int +fill_mp_bus_to_cpumask(void) +{ + struct pci_dev *nb_dev = NULL; + int i, j, printed; + u32 ldtbus, nid; + static int lbnr[3] = { + LDT_BUS_NUMBER_REGISTER_0, + LDT_BUS_NUMBER_REGISTER_1, + LDT_BUS_NUMBER_REGISTER_2 + }; + + while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, + PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) { + pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid); + + for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) { + pci_read_config_dword(nb_dev, lbnr[i], &ldtbus); + /* + * if there are no busses hanging off of the current + * ldt link then both the secondary and subordinate + * bus number fields are set to 0. + */ + if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0 + && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) { + for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); + j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); + j++) + pci_bus_to_cpumask[j] = + node_to_cpumask(NODE_ID(nid)); + } + } + } + + /* quick sanity check */ + printed = 0; + for (i = 0; i < 256; i++) { + if (cpus_empty(pci_bus_to_cpumask[i])) { + pci_bus_to_cpumask[i] = CPU_MASK_ALL; + if (printed) + continue; + printk(KERN_ERR + "k8-bus.c: some busses have empty cpu mask\n"); + printed = 1; + } + } + + return 0; +} + +fs_initcall(fill_mp_bus_to_cpumask); diff --git a/arch/x86_64/pci/mmconfig.c b/arch/x86_64/pci/mmconfig.c new file mode 100644 index 0000000..b693c23 --- /dev/null +++ b/arch/x86_64/pci/mmconfig.c @@ -0,0 +1,104 @@ +/* + * mmconfig.c - Low-level direct PCI config space access via MMCONFIG + * + * This is an 64bit optimized version that always keeps the full mmconfig + * space mapped. This allows lockless config space operation. + */ + +#include <linux/pci.h> +#include <linux/init.h> +#include "pci.h" + +#define MMCONFIG_APER_SIZE (256*1024*1024) + +/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ +u32 pci_mmcfg_base_addr; + +/* Static virtual mapping of the MMCONFIG aperture */ +char *pci_mmcfg_virt; + +static inline char *pci_dev_base(unsigned int bus, unsigned int devfn) +{ + return pci_mmcfg_virt + ((bus << 20) | (devfn << 12)); +} + +static int pci_mmcfg_read(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 *value) +{ + char *addr = pci_dev_base(bus, devfn); + + if (unlikely(!value || (bus > 255) || (devfn > 255) || (reg > 4095))) + return -EINVAL; + + switch (len) { + case 1: + *value = readb(addr + reg); + break; + case 2: + *value = readw(addr + reg); + break; + case 4: + *value = readl(addr + reg); + break; + } + + return 0; +} + +static int pci_mmcfg_write(unsigned int seg, unsigned int bus, + unsigned int devfn, int reg, int len, u32 value) +{ + char *addr = pci_dev_base(bus,devfn); + + if (unlikely((bus > 255) || (devfn > 255) || (reg > 4095))) + return -EINVAL; + + switch (len) { + case 1: + writeb(value, addr + reg); + break; + case 2: + writew(value, addr + reg); + break; + case 4: + writel(value, addr + reg); + break; + } + + return 0; +} + +static struct pci_raw_ops pci_mmcfg = { + .read = pci_mmcfg_read, + .write = pci_mmcfg_write, +}; + +static int __init pci_mmcfg_init(void) +{ + if ((pci_probe & PCI_PROBE_MMCONF) == 0) + return 0; + if (!pci_mmcfg_base_addr) + return 0; + + /* Kludge for now. Don't use mmconfig on AMD systems because + those have some busses where mmconfig doesn't work, + and we don't parse ACPI MCFG well enough to handle that. + Remove when proper handling is added. */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD) + return 0; + + /* RED-PEN i386 doesn't do _nocache right now */ + pci_mmcfg_virt = ioremap_nocache(pci_mmcfg_base_addr, MMCONFIG_APER_SIZE); + if (!pci_mmcfg_virt) { + printk("PCI: Cannot map mmconfig aperture\n"); + return 0; + } + + printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_base_addr); + raw_pci_ops = &pci_mmcfg; + pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; + + return 0; +} + +arch_initcall(pci_mmcfg_init); |