powerpc/fsl-booke: Add initial T1040RDB board support

T1040RDB is Freescale Reference Design Board supporting
the T1040 QorIQ Power Architecture™ processor.

T1040RDB board Overview
-----------------------
- SERDES Connections, 8 lanes supporting:
	- PCI
	- SGMII
	- QSGMII
	- SATA 2.0
- DDR Controller
	- Supports rates of up to 1600 MHz data-rate
	- Supports one DDR3LP UDIMM
-IFC/Local Bus
	- NAND flash: 1GB 8-bit NAND flash
	- NOR: 128MB 16-bit NOR Flash
- Ethernet
	- Two on-board RGMII 10/100/1G ethernet ports.
	- PHY #0 remains powered up during deep-sleep
- CPLD
- Clocks
	- System and DDR clock (SYSCLK, “DDRCLK”)
	- SERDES clocks
- Power Supplies
- USB
	- Supports two USB 2.0 ports with integrated PHYs
	- Two type A ports with 5V@1.5A per port.
- SDHC
	- SDHC/SDXC connector
- SPI
	- On-board 64MB SPI flash
- I2C
	- Devices connected: EEPROM, thermal monitor, VID controller
- Other IO
	- Two Serial ports
	- ProfiBus port

Add support for T1040 RDB board:
-add device tree
-add entry in Kconfig to build
-Add entry corenet_generic.c, as it is similar to other corenet platforms

Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Stefan Sicleru <stefan.sicleru@freescale.com>
Signed-off-by: Alex MARGINEAN <alexandru.marginean@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
Change-Id: I74d0240522572912995754aecfc3b2d15a48f9fe
Reviewed-on: http://git.am.freescale.net:8181/10135
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Qiang Zhao <qiang.zhao@freescale.com>
Reviewed-by: Jose Rivera <German.Rivera@freescale.com>

3 files changed, 380 insertions, 1 deletions

diff --git a/arch/powerpc/boot/dts/t1040rdb.dts b/arch/powerpc/boot/dts/t1040rdb.dts
new file mode 100644
index 0000000..3ad408d
--- /dev/null
+++ b/arch/powerpc/boot/dts/t1040rdb.dts
@@ -0,0 +1,375 @@
+/*
+ * T1040RDB Device Tree Source
+ *
+ * Copyright 2014 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *	 notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *	 notice, this list of conditions and the following disclaimer in the
+ *	 documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *	 names of its contributors may be used to endorse or promote products
+ *	 derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor "AS IS" AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/include/ "fsl/t104xsi-pre.dtsi"
+
+/ {
+	model = "fsl,T1040RDB";
+	compatible = "fsl,T1040RDB";
+	#address-cells = <2>;
+	#size-cells = <2>;
+	interrupt-parent = <&mpic>;
+
+	aliases {
+		phy_rgmii_0 = &phy_rgmii_0;
+		phy_rgmii_1 = &phy_rgmii_1;
+		phy_sgmii_2 = &phy_sgmii_2;
+	};
+
+	ifc: localbus@ffe124000 {
+		reg = <0xf 0xfe124000 0 0x2000>;
+		ranges = <0 0 0xf 0xe8000000 0x08000000
+			  2 0 0xf 0xff800000 0x00010000
+			  3 0 0xf 0xffdf0000 0x00008000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,ifc-nand";
+			reg = <0x2 0x0 0x10000>;
+
+			partition@0 {
+				/* This location must not be altered  */
+				/* 1MB for u-boot Bootloader Image */
+				reg = <0x0 0x00100000>;
+				label = "NAND U-Boot Image";
+				read-only;
+			};
+
+			partition@100000 {
+				/* 1MB for DTB Image */
+				reg = <0x00100000 0x00100000>;
+				label = "NAND DTB Image";
+			};
+
+			partition@200000 {
+				/* 10MB for Linux Kernel Image */
+				reg = <0x00200000 0x00A00000>;
+				label = "NAND Linux Kernel Image";
+			};
+
+			partition@C00000 {
+				/* 500MB for Root file System Image */
+				reg = <0x00c00000 0x1F400000>;
+				label = "NAND RFS Image";
+			};
+		};
+
+		cpld@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,p104xrdb-cpld";
+			reg = <3 0 0x20>;
+			ranges = <0 3 0 0x20>;
+			bank-width = <1>;
+			device-width = <1>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	dcsr: dcsr@f00000000 {
+		ranges = <0x00000000 0xf 0x00000000 0x01072000>;
+	};
+
+	bportals: bman-portals@ff4000000 {
+		ranges = <0x0 0xf 0xf4000000 0x2000000>;
+	};
+
+	qportals: qman-portals@ff6000000 {
+		ranges = <0x0 0xf 0xf6000000 0x2000000>;
+	};
+
+	soc: soc@ffe000000 {
+		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
+		reg = <0xf 0xfe000000 0 0x00001000>;
+
+		i2c@118100 {
+			pca9546@77 {
+				compatible = "philips,pca9546";
+				reg = <0x77>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		spi@110000 {
+			flash@0 {
+				#address-cells = <1>;
+				#size-cells = <1>;
+				compatible = "micron,n25q512a";
+				reg = <0>;
+				spi-max-frequency = <10000000>; /* input clock */
+			};
+		};
+
+		fman0: fman@400000 {
+			enet0: ethernet@e0000 {
+				fixed-link = <0 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			enet1: ethernet@e2000 {
+				fixed-link = <1 1 1000 0 0>;
+				phy-connection-type = "sgmii";
+			};
+
+			enet2: ethernet@e4000 {
+				phy-handle = <&phy_sgmii_2>;
+				phy-connection-type = "sgmii";
+			};
+
+			enet3: ethernet@e6000 {
+				phy-handle = <&phy_rgmii_0>;
+				phy-connection-type = "rgmii";
+			};
+
+			enet4: ethernet@e8000 {
+				phy-handle = <&phy_rgmii_1>;
+				phy-connection-type = "rgmii";
+			};
+
+			mdio0: mdio@fc000 {
+				phy_sgmii_2: ethernet-phy@03 {
+					reg = <0x03>;
+				};
+				phy_rgmii_0: ethernet-phy@01 {
+					reg = <0x01>;
+				};
+				phy_rgmii_1: ethernet-phy@02 {
+					reg = <0x02>;
+				};
+				phy_qsgmii_0: ethernet-phy@04 {
+					reg = <0x04>;
+				};
+				phy_qsgmii_1: ethernet-phy@05 {
+					reg = <0x05>;
+				};
+				phy_qsgmii_2: ethernet-phy@06 {
+					reg = <0x06>;
+				};
+				phy_qsgmii_3: ethernet-phy@07 {
+					reg = <0x07>;
+				};
+				phy_qsgmii_4: ethernet-phy@08 {
+					reg = <0x08>;
+				};
+				phy_qsgmii_5: ethernet-phy@09 {
+					reg = <0x09>;
+				};
+				phy_qsgmii_6: ethernet-phy@0a {
+					reg = <0x0a>;
+				};
+				phy_qsgmii_7: ethernet-phy@0b {
+					reg = <0x0b>;
+				};
+			};
+		};
+
+		l2switch: l2switch@800000 {
+			port@100000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_0>;
+			};
+			port@110000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_1>;
+			};
+			port@120000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_2>;
+			};
+			port@130000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_3>;
+			};
+			port@140000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_4>;
+			};
+			port@150000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_5>;
+			};
+			port@160000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_6>;
+			};
+			port@170000 {
+				phy-connection-type = "qsgmii";
+				phy-handle = <&phy_qsgmii_7>;
+			};
+		};
+	};
+
+	pci0: pcie@ffe240000 {
+		reg = <0xf 0xfe240000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci1: pcie@ffe250000 {
+		reg = <0xf 0xfe250000 0 0x10000>;
+		ranges = <0x02000000 0x0 0xe0000000 0xc 0x10000000 0x0 0x10000000
+			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci2: pcie@ffe260000 {
+		reg = <0xf 0xfe260000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	pci3: pcie@ffe270000 {
+		reg = <0xf 0xfe270000 0 0x10000>;
+		ranges = <0x02000000 0 0xe0000000 0xc 0x30000000 0 0x10000000
+			  0x01000000 0 0x00000000 0xf 0xf8030000 0 0x00010000>;
+		pcie@0 {
+			ranges = <0x02000000 0 0xe0000000
+				  0x02000000 0 0xe0000000
+				  0 0x10000000
+
+				  0x01000000 0 0x00000000
+				  0x01000000 0 0x00000000
+				  0 0x00010000>;
+		};
+	};
+
+	fsl,dpaa {
+		compatible = "fsl,t1040-dpaa", "fsl,dpaa";
+		ethernet@0 {
+			compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet";
+			fsl,fman-mac = <&enet0>;
+		};
+		ethernet@1 {
+			compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet";
+			fsl,fman-mac = <&enet1>;
+		};
+		ethernet@2 {
+			compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet";
+			fsl,fman-mac = <&enet2>;
+		};
+		ethernet@3 {
+			compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet";
+			fsl,fman-mac = <&enet3>;
+		};
+		ethernet@4 {
+			compatible = "fsl,t1040-dpa-ethernet", "fsl,dpa-ethernet";
+			fsl,fman-mac = <&enet4>;
+		};
+	};
+
+	qe: qe@ffe139999 {
+		ranges = <0x0 0xf 0xfe140000 0x40000>;
+		reg = <0xf 0xfe140000 0 0x480>;
+		brg-frequency = <0>;
+		bus-frequency = <0>;
+
+		si1: si@700 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl,qe-si";
+			reg = <0x700 0x80>;
+		};
+
+		siram1: siram@1000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,qe-siram";
+			reg = <0x1000 0x800>;
+		};
+
+		tdma: ucc@2000 {
+			compatible = "fsl,ucc-tdm";
+			rx-clock-name = "clk8";
+			tx-clock-name = "clk9";
+			fsl,rx-sync-clock = "rsync_pin";
+			fsl,tx-sync-clock = "tsync_pin";
+			fsl,tx-timeslot = <0xfffffffe>;
+			fsl,rx-timeslot = <0xfffffffe>;
+			fsl,tdm-framer-type = "e1";
+			fsl,tdm-mode = "normal";
+			fsl,tdm-id = <0>;
+			fsl,siram-entry-id = <0>;
+		};
+
+		serial: ucc@2200 {
+			device_type = "serial";
+			compatible = "ucc_uart";
+			port-number = <1>;
+			rx-clock-name = "brg2";
+			tx-clock-name = "brg2";
+		};
+	};
+};
+/include/ "fsl/t1040si-post.dtsi"
+/include/ "fsl/qoriq-dpaa-res3.dtsi"
diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig
index e9ce7cd..8d16a9f 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -284,7 +284,7 @@ config CORENET_GENERIC
 	  For 64bit kernel, the following boards are supported:
 	    T208x QDS and RDB, T4240 QDS and B4 QDS
 	  The following boards are supported for both 32bit and 64bit kernel:
-	    P5020 DS, P5040 DS, T104xQDS
+	    P5020 DS, P5040 DS, T104xQDS, T104xRDB
 
 endif # FSL_SOC_BOOKE
 
diff --git a/arch/powerpc/platforms/85xx/corenet_generic.c b/arch/powerpc/platforms/85xx/corenet_generic.c
index 924b2bd..56a3379 100644
--- a/arch/powerpc/platforms/85xx/corenet_generic.c
+++ b/arch/powerpc/platforms/85xx/corenet_generic.c
@@ -134,6 +134,8 @@ static const char * const boards[] __initconst = {
 	"fsl,P5040DS",
 	"fsl,T1040QDS",
 	"fsl,T1042QDS",
+	"fsl,T1040RDB",
+	"fsl,T1042RDB",
 	"fsl,T2080QDS",
 	"fsl,T2081QDS",
 	"fsl,T2080RDB",
@@ -152,6 +154,8 @@ static const char * const hv_boards[] __initconst = {
 	"fsl,P5040DS-hv",
 	"fsl,T1040QDS-hv",
 	"fsl,T1042QDS-hv",
+	"fsl,T1040RDB-hv",
+	"fsl,T1042RDB-hv",
 	"fsl,T2080QDS-hv",
 	"fsl,T2081QDS-hv",
 	"fsl,T2080RDB-hv",