Merge tag 'dt-3.11-4' of git://git.infradead.org/users/jcooper/linux into next/dt

From Jason Cooper:
mvebu dt changes for v3.11 (round 4)

 - kirkwood
    - reshuffle nodes from kirkwood.dtsi to -6281.dtsi, etc
    - add i2c-gpio for km_kirkwood
    - add cpu node so pending cpufreq driver will init

* tag 'dt-3.11-4' of git://git.infradead.org/users/jcooper/linux:
  ARM: Kirkwood add cpus definition needed by cpufreq driver to dtsi
  ARM: kirkwood: add i2c-gpio controller for km_kirkwood
  ARM: kirkwood: refactor dtsi to largest common nodes

Signed-off-by: Olof Johansson <olof@lixom.net>

5 files changed, 76 insertions, 28 deletions

diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi
index d6c9d65..0ed2f56 100644
--- a/arch/arm/boot/dts/kirkwood-6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6281.dtsi
@@ -40,5 +40,33 @@
 				marvell,function = "sdio";
 			};
 		};
+
+		rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			status = "disabled";
+		};
+
+		mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi
index 23991e4..69b760d 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -49,6 +49,34 @@
 			};
 		};
 
+		rtc@10300 {
+			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
+			reg = <0x10300 0x20>;
+			interrupts = <53>;
+			clocks = <&gate_clk 7>;
+		};
+
+		sata@80000 {
+			compatible = "marvell,orion-sata";
+			reg = <0x80000 0x5000>;
+			interrupts = <21>;
+			clocks = <&gate_clk 14>, <&gate_clk 15>;
+			clock-names = "0", "1";
+			status = "disabled";
+		};
+
+		mvsdio@90000 {
+			compatible = "marvell,orion-sdio";
+			reg = <0x90000 0x200>;
+			interrupts = <28>;
+			clocks = <&gate_clk 4>;
+			bus-width = <4>;
+			cap-sdio-irq;
+			cap-sd-highspeed;
+			cap-mmc-highspeed;
+			status = "disabled";
+		};
+
 		thermal@10078 {
 			compatible = "marvell,kirkwood-thermal";
 			reg = <0x10078 0x4>;
diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
index 66b971b..5d9f5ea 100644
--- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
+++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts
@@ -42,4 +42,11 @@
 			chip-delay = <25>;
 		};
 	};
+
+	i2c@0 {
+		compatible = "i2c-gpio";
+		gpios = < &gpio0 8 0		/* sda */
+			&gpio0 9 0 >;		/* scl */
+		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
+	};
 };
diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts
index 79391ca..089024a 100644
--- a/arch/arm/boot/dts/kirkwood-nsa310.dts
+++ b/arch/arm/boot/dts/kirkwood-nsa310.dts
@@ -1,6 +1,7 @@
 /dts-v1/;
 
 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	model = "ZyXEL NSA310";
diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi
index e2a28db..5d7b759 100644
--- a/arch/arm/boot/dts/kirkwood.dtsi
+++ b/arch/arm/boot/dts/kirkwood.dtsi
@@ -4,6 +4,18 @@
 	compatible = "marvell,kirkwood";
 	interrupt-parent = <&intc>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "marvell,feroceon";
+			clocks = <&core_clk 1>, <&core_clk 3>, <&gate_clk 11>;
+			clock-names = "cpu_clk", "ddrclk", "powersave";
+		};
+	};
+
 	aliases {
 	       gpio0 = &gpio0;
 	       gpio1 = &gpio1;
@@ -71,13 +83,6 @@
 			status = "disabled";
 		};
 
-		rtc@10300 {
-			compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc";
-			reg = <0x10300 0x20>;
-			interrupts = <53>;
-			clocks = <&gate_clk 7>;
-		};
-
 		spi@10600 {
 			compatible = "marvell,orion-spi";
 			#address-cells = <1>;
@@ -151,15 +156,6 @@
 			status = "okay";
 		};
 
-		sata@80000 {
-			compatible = "marvell,orion-sata";
-			reg = <0x80000 0x5000>;
-			interrupts = <21>;
-			clocks = <&gate_clk 14>, <&gate_clk 15>;
-			clock-names = "0", "1";
-			status = "disabled";
-		};
-
 		nand@3000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
@@ -194,17 +190,5 @@
 			clocks = <&gate_clk 17>;
 			status = "okay";
 		};
-
-		mvsdio@90000 {
-			compatible = "marvell,orion-sdio";
-			reg = <0x90000 0x200>;
-			interrupts = <28>;
-			clocks = <&gate_clk 4>;
-			bus-width = <4>;
-			cap-sdio-irq;
-			cap-sd-highspeed;
-			cap-mmc-highspeed;
-			status = "disabled";
-		};
 	};
 };