diff options
author | Scott Wood <scottwood@freescale.com> | 2007-07-16 16:43:43 (GMT) |
---|---|---|
committer | Kumar Gala <galak@kernel.crashing.org> | 2007-10-04 01:35:43 (GMT) |
commit | c374e00e17f1c10768d5af922a1ff33e43df2eb0 (patch) | |
tree | fc6149e7f3b86bb202c475d4414a926c481761b8 /arch | |
parent | e631ae3b164158fbf486fbed5adb597696c4f0e5 (diff) | |
download | linux-fsl-qoriq-c374e00e17f1c10768d5af922a1ff33e43df2eb0.tar.xz |
[POWERPC] Add early debug console for CPM serial ports.
This code assumes that the ports have been previously set up, with
buffers in DPRAM.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Acked-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Diffstat (limited to 'arch')
-rw-r--r-- | arch/powerpc/Kconfig.debug | 21 | ||||
-rw-r--r-- | arch/powerpc/kernel/head_32.S | 16 | ||||
-rw-r--r-- | arch/powerpc/kernel/udbg.c | 2 | ||||
-rw-r--r-- | arch/powerpc/platforms/8xx/Kconfig | 1 | ||||
-rw-r--r-- | arch/powerpc/platforms/Kconfig | 4 | ||||
-rw-r--r-- | arch/powerpc/sysdev/Makefile | 1 | ||||
-rw-r--r-- | arch/powerpc/sysdev/cpm_common.c | 46 |
7 files changed, 91 insertions, 0 deletions
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index c38bc22..f4e5d22 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -221,6 +221,15 @@ config PPC_EARLY_DEBUG_44x Select this to enable early debugging for IBM 44x chips via the inbuilt serial port. +config PPC_EARLY_DEBUG_CPM + bool "Early serial debugging for Freescale CPM-based serial ports" + depends on SERIAL_CPM + select PIN_TLB if PPC_8xx + help + Select this to enable early debugging for Freescale chips + using a CPM-based serial port. This assumes that the bootwrapper + has run, and set up the CPM in a particular way. + endchoice config PPC_EARLY_DEBUG_44x_PHYSLOW @@ -233,4 +242,16 @@ config PPC_EARLY_DEBUG_44x_PHYSHIGH depends PPC_EARLY_DEBUG_44x default "0x1" +config PPC_EARLY_DEBUG_CPM_ADDR + hex "CPM UART early debug transmit descriptor address" + depends on PPC_EARLY_DEBUG_CPM + default "0xfa202808" if PPC_EP88XC + default "0xf0000808" if CPM2 + default "0xff002808" if CPM1 + help + This specifies the address of the transmit descriptor + used for early debug output. Because it is needed before + platform probing is done, all platforms selected must + share the same address. + endmenu diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S index c86c626..d83f04e 100644 --- a/arch/powerpc/kernel/head_32.S +++ b/arch/powerpc/kernel/head_32.S @@ -149,6 +149,9 @@ __after_mmu_off: #if defined(CONFIG_BOOTX_TEXT) bl setup_disp_bat #endif +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM + bl setup_cpm_bat +#endif /* * Call setup_cpu for CPU 0 and initialize 6xx Idle @@ -1245,6 +1248,19 @@ setup_disp_bat: blr #endif /* CONFIG_BOOTX_TEXT */ +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM +setup_cpm_bat: + lis r8, 0xf000 + ori r8, r8, 0x002a + mtspr SPRN_DBAT1L, r8 + + lis r11, 0xf000 + ori r11, r11, (BL_1M << 2) | 2 + mtspr SPRN_DBAT1U, r11 + + blr +#endif + #ifdef CONFIG_8260 /* Jump into the system reset for the rom. * We first disable the MMU, and then jump to the ROM reset address. diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index 0f9b4ea..d723070 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -54,6 +54,8 @@ void __init udbg_early_init(void) #elif defined(CONFIG_PPC_EARLY_DEBUG_44x) /* PPC44x debug */ udbg_init_44x_as1(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_CPM) + udbg_init_cpm(); #endif } diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig index 39bb8c5..8ecd01a 100644 --- a/arch/powerpc/platforms/8xx/Kconfig +++ b/arch/powerpc/platforms/8xx/Kconfig @@ -3,6 +3,7 @@ config FADS config CPM1 bool + select CPM choice prompt "8xx Machine Type" diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig index 8a62ca5..cc6013f 100644 --- a/arch/powerpc/platforms/Kconfig +++ b/arch/powerpc/platforms/Kconfig @@ -273,6 +273,7 @@ config QUICC_ENGINE config CPM2 bool default n + select CPM help The CPM2 (Communications Processor Module) is a coprocessor on embedded CPUs made by Freescale. Selecting this option means that @@ -309,4 +310,7 @@ config FSL_ULI1575 Freescale reference boards. The boards all use the ULI in pretty much the same way. +config CPM + bool + endmenu diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 592c17e..52e93bc 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -31,6 +31,7 @@ endif # Temporary hack until we have migrated to asm-powerpc ifeq ($(ARCH),powerpc) +obj-$(CONFIG_CPM) += cpm_common.o obj-$(CONFIG_CPM2) += cpm2_common.o cpm2_pic.o obj-$(CONFIG_8xx) += mpc8xx_pic.o commproc.o obj-$(CONFIG_UCODE_PATCH) += micropatch.o diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c new file mode 100644 index 0000000..9daa6ac --- /dev/null +++ b/arch/powerpc/sysdev/cpm_common.c @@ -0,0 +1,46 @@ +/* + * Common CPM code + * + * Author: Scott Wood <scottwood@freescale.com> + * + * Copyright 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <asm/udbg.h> +#include <asm/io.h> +#include <asm/system.h> +#include <mm/mmu_decl.h> + +#ifdef CONFIG_PPC_EARLY_DEBUG_CPM +static u32 __iomem *cpm_udbg_txdesc = + (u32 __iomem __force *)CONFIG_PPC_EARLY_DEBUG_CPM_ADDR; + +static void udbg_putc_cpm(char c) +{ + u8 __iomem *txbuf = (u8 __iomem __force *)in_be32(&cpm_udbg_txdesc[1]); + + if (c == '\n') + udbg_putc('\r'); + + while (in_be32(&cpm_udbg_txdesc[0]) & 0x80000000) + ; + + out_8(txbuf, c); + out_be32(&cpm_udbg_txdesc[0], 0xa0000001); +} + +void __init udbg_init_cpm(void) +{ + if (cpm_udbg_txdesc) { +#ifdef CONFIG_CPM2 + setbat(1, 0xf0000000, 0xf0000000, 1024*1024, _PAGE_IO); +#endif + udbg_putc = udbg_putc_cpm; + } +} +#endif |