diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/char/ser_a2232.c | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/char/ser_a2232.c')
-rw-r--r-- | drivers/char/ser_a2232.c | 825 |
1 files changed, 825 insertions, 0 deletions
diff --git a/drivers/char/ser_a2232.c b/drivers/char/ser_a2232.c new file mode 100644 index 0000000..6b4e9d1 --- /dev/null +++ b/drivers/char/ser_a2232.c @@ -0,0 +1,825 @@ +/* drivers/char/ser_a2232.c */ + +/* $Id: ser_a2232.c,v 0.4 2000/01/25 12:00:00 ehaase Exp $ */ + +/* Linux serial driver for the Amiga A2232 board */ + +/* This driver is MAINTAINED. Before applying any changes, please contact + * the author. + */ + +/* Copyright (c) 2000-2001 Enver Haase <ehaase@inf.fu-berlin.de> + * alias The A2232 driver project <A2232@gmx.net> + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +/***************************** Documentation ************************/ +/* + * This driver is in EXPERIMENTAL state. That means I could not find + * someone with five A2232 boards with 35 ports running at 19200 bps + * at the same time and test the machine's behaviour. + * However, I know that you can performance-tweak this driver (see + * the source code). + * One thing to consider is the time this driver consumes during the + * Amiga's vertical blank interrupt. Everything that is to be done + * _IS DONE_ when entering the vertical blank interrupt handler of + * this driver. + * However, it would be more sane to only do the job for only ONE card + * instead of ALL cards at a time; or, more generally, to handle only + * SOME ports instead of ALL ports at a time. + * However, as long as no-one runs into problems I guess I shouldn't + * change the driver as it runs fine for me :) . + * + * Version history of this file: + * 0.4 Resolved licensing issues. + * 0.3 Inclusion in the Linux/m68k tree, small fixes. + * 0.2 Added documentation, minor typo fixes. + * 0.1 Initial release. + * + * TO DO: + * - Handle incoming BREAK events. I guess "Stevens: Advanced + * Programming in the UNIX(R) Environment" is a good reference + * on what is to be done. + * - When installing as a module, don't simply 'printk' text, but + * send it to the TTY used by the user. + * + * THANKS TO: + * - Jukka Marin (65EC02 code). + * - The other NetBSD developers on whose A2232 driver I had a + * pretty close look. However, I didn't copy any code so it + * is okay to put my code under the GPL and include it into + * Linux. + */ +/***************************** End of Documentation *****************/ + +/***************************** Defines ******************************/ +/* + * Enables experimental 115200 (normal) 230400 (turbo) baud rate. + * The A2232 specification states it can only operate at speeds up to + * 19200 bits per second, and I was not able to send a file via + * "sz"/"rz" and a null-modem cable from one A2232 port to another + * at 115200 bits per second. + * However, this might work for you. + */ +#undef A2232_SPEEDHACK +/* + * Default is not to use RTS/CTS so you could be talked to death. + */ +#define A2232_SUPPRESS_RTSCTS_WARNING +/************************* End of Defines ***************************/ + +/***************************** Includes *****************************/ +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/sched.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/tty.h> + +#include <asm/setup.h> +#include <asm/amigaints.h> +#include <asm/amigahw.h> +#include <linux/zorro.h> +#include <asm/irq.h> +#include <asm/semaphore.h> + +#include <linux/delay.h> + +#include <linux/serial.h> +#include <linux/generic_serial.h> + +#include "ser_a2232.h" +#include "ser_a2232fw.h" +/************************* End of Includes **************************/ + +/***************************** Prototypes ***************************/ +/* The interrupt service routine */ +static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp); +/* Initialize the port structures */ +static void a2232_init_portstructs(void); +/* Initialize and register TTY drivers. */ +/* returns 0 IFF successful */ +static int a2232_init_drivers(void); + +/* BEGIN GENERIC_SERIAL PROTOTYPES */ +static void a2232_disable_tx_interrupts(void *ptr); +static void a2232_enable_tx_interrupts(void *ptr); +static void a2232_disable_rx_interrupts(void *ptr); +static void a2232_enable_rx_interrupts(void *ptr); +static int a2232_get_CD(void *ptr); +static void a2232_shutdown_port(void *ptr); +static int a2232_set_real_termios(void *ptr); +static int a2232_chars_in_buffer(void *ptr); +static void a2232_close(void *ptr); +static void a2232_hungup(void *ptr); +/* static void a2232_getserial (void *ptr, struct serial_struct *sp); */ +/* END GENERIC_SERIAL PROTOTYPES */ + +/* Functions that the TTY driver struct expects */ +static int a2232_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg); +static void a2232_throttle(struct tty_struct *tty); +static void a2232_unthrottle(struct tty_struct *tty); +static int a2232_open(struct tty_struct * tty, struct file * filp); +/************************* End of Prototypes ************************/ + +/***************************** Global variables *********************/ +/*--------------------------------------------------------------------------- + * Interface from generic_serial.c back here + *--------------------------------------------------------------------------*/ +static struct real_driver a2232_real_driver = { + a2232_disable_tx_interrupts, + a2232_enable_tx_interrupts, + a2232_disable_rx_interrupts, + a2232_enable_rx_interrupts, + a2232_get_CD, + a2232_shutdown_port, + a2232_set_real_termios, + a2232_chars_in_buffer, + a2232_close, + a2232_hungup, + NULL /* a2232_getserial */ +}; + +static void *a2232_driver_ID = &a2232_driver_ID; // Some memory address WE own. + +/* Ports structs */ +static struct a2232_port a2232_ports[MAX_A2232_BOARDS*NUMLINES]; + +/* TTY driver structs */ +static struct tty_driver *a2232_driver; + +/* nr of cards completely (all ports) and correctly configured */ +static int nr_a2232; + +/* zorro_dev structs for the A2232's */ +static struct zorro_dev *zd_a2232[MAX_A2232_BOARDS]; +/***************************** End of Global variables **************/ + +/* Helper functions */ + +static inline volatile struct a2232memory *a2232mem(unsigned int board) +{ + return (volatile struct a2232memory *)ZTWO_VADDR(zd_a2232[board]->resource.start); +} + +static inline volatile struct a2232status *a2232stat(unsigned int board, + unsigned int portonboard) +{ + volatile struct a2232memory *mem = a2232mem(board); + return &(mem->Status[portonboard]); +} + +static inline void a2232_receive_char(struct a2232_port *port, int ch, int err) +{ +/* Mostly stolen from other drivers. + Maybe one could implement a more efficient version by not only + transferring one character at a time. +*/ + struct tty_struct *tty = port->gs.tty; + + if (tty->flip.count >= TTY_FLIPBUF_SIZE) + return; + + tty->flip.count++; + +#if 0 + switch(err) { + case TTY_BREAK: + break; + case TTY_PARITY: + break; + case TTY_OVERRUN: + break; + case TTY_FRAME: + break; + } +#endif + + *tty->flip.flag_buf_ptr++ = err; + *tty->flip.char_buf_ptr++ = ch; + tty_flip_buffer_push(tty); +} + +/***************************** Functions ****************************/ +/*** BEGIN OF REAL_DRIVER FUNCTIONS ***/ + +static void a2232_disable_tx_interrupts(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *stat; + unsigned long flags; + + port = ptr; + stat = a2232stat(port->which_a2232, port->which_port_on_a2232); + stat->OutDisable = -1; + + /* Does this here really have to be? */ + local_irq_save(flags); + port->gs.flags &= ~GS_TX_INTEN; + local_irq_restore(flags); +} + +static void a2232_enable_tx_interrupts(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *stat; + unsigned long flags; + + port = ptr; + stat = a2232stat(port->which_a2232, port->which_port_on_a2232); + stat->OutDisable = 0; + + /* Does this here really have to be? */ + local_irq_save(flags); + port->gs.flags |= GS_TX_INTEN; + local_irq_restore(flags); +} + +static void a2232_disable_rx_interrupts(void *ptr) +{ + struct a2232_port *port; + port = ptr; + port->disable_rx = -1; +} + +static void a2232_enable_rx_interrupts(void *ptr) +{ + struct a2232_port *port; + port = ptr; + port->disable_rx = 0; +} + +static int a2232_get_CD(void *ptr) +{ + return ((struct a2232_port *) ptr)->cd_status; +} + +static void a2232_shutdown_port(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *stat; + unsigned long flags; + + port = ptr; + stat = a2232stat(port->which_a2232, port->which_port_on_a2232); + + local_irq_save(flags); + + port->gs.flags &= ~GS_ACTIVE; + + if (port->gs.tty && port->gs.tty->termios->c_cflag & HUPCL) { + /* Set DTR and RTS to Low, flush output. + The NetBSD driver "msc.c" does it this way. */ + stat->Command = ( (stat->Command & ~A2232CMD_CMask) | + A2232CMD_Close ); + stat->OutFlush = -1; + stat->Setup = -1; + } + + local_irq_restore(flags); + + /* After analyzing control flow, I think a2232_shutdown_port + is actually the last call from the system when at application + level someone issues a "echo Hello >>/dev/ttyY0". + Therefore I think the MOD_DEC_USE_COUNT should be here and + not in "a2232_close()". See the comment in "sx.c", too. + If you run into problems, compile this driver into the + kernel instead of compiling it as a module. */ +} + +static int a2232_set_real_termios(void *ptr) +{ + unsigned int cflag, baud, chsize, stopb, parity, softflow; + int rate; + int a2232_param, a2232_cmd; + unsigned long flags; + unsigned int i; + struct a2232_port *port = ptr; + volatile struct a2232status *status; + volatile struct a2232memory *mem; + + if (!port->gs.tty || !port->gs.tty->termios) return 0; + + status = a2232stat(port->which_a2232, port->which_port_on_a2232); + mem = a2232mem(port->which_a2232); + + a2232_param = a2232_cmd = 0; + + // get baud rate + baud = port->gs.baud; + if (baud == 0) { + /* speed == 0 -> drop DTR, do nothing else */ + local_irq_save(flags); + // Clear DTR (and RTS... mhhh). + status->Command = ( (status->Command & ~A2232CMD_CMask) | + A2232CMD_Close ); + status->OutFlush = -1; + status->Setup = -1; + + local_irq_restore(flags); + return 0; + } + + rate = A2232_BAUD_TABLE_NOAVAIL; + for (i=0; i < A2232_BAUD_TABLE_NUM_RATES * 3; i += 3){ + if (a2232_baud_table[i] == baud){ + if (mem->Common.Crystal == A2232_TURBO) rate = a2232_baud_table[i+2]; + else rate = a2232_baud_table[i+1]; + } + } + if (rate == A2232_BAUD_TABLE_NOAVAIL){ + printk("a2232: Board %d Port %d unsupported baud rate: %d baud. Using another.\n",port->which_a2232,port->which_port_on_a2232,baud); + // This is useful for both (turbo or normal) Crystal versions. + rate = A2232PARAM_B9600; + } + a2232_param |= rate; + + cflag = port->gs.tty->termios->c_cflag; + + // get character size + chsize = cflag & CSIZE; + switch (chsize){ + case CS8: a2232_param |= A2232PARAM_8Bit; break; + case CS7: a2232_param |= A2232PARAM_7Bit; break; + case CS6: a2232_param |= A2232PARAM_6Bit; break; + case CS5: a2232_param |= A2232PARAM_5Bit; break; + default: printk("a2232: Board %d Port %d unsupported character size: %d. Using 8 data bits.\n", + port->which_a2232,port->which_port_on_a2232,chsize); + a2232_param |= A2232PARAM_8Bit; break; + } + + // get number of stop bits + stopb = cflag & CSTOPB; + if (stopb){ // two stop bits instead of one + printk("a2232: Board %d Port %d 2 stop bits unsupported. Using 1 stop bit.\n", + port->which_a2232,port->which_port_on_a2232); + } + + // Warn if RTS/CTS not wanted + if (!(cflag & CRTSCTS)){ +#ifndef A2232_SUPPRESS_RTSCTS_WARNING + printk("a2232: Board %d Port %d cannot switch off firmware-implemented RTS/CTS hardware flow control.\n", + port->which_a2232,port->which_port_on_a2232); +#endif + } + + /* I think this is correct. + However, IXOFF means _input_ flow control and I wonder + if one should care about IXON _output_ flow control, + too. If this makes problems, one should turn the A2232 + firmware XON/XOFF "SoftFlow" flow control off and use + the conventional way of inserting START/STOP characters + by hand in throttle()/unthrottle(). + */ + softflow = !!( port->gs.tty->termios->c_iflag & IXOFF ); + + // get Parity (Enabled/Disabled? If Enabled, Odd or Even?) + parity = cflag & (PARENB | PARODD); + if (parity & PARENB){ + if (parity & PARODD){ + a2232_cmd |= A2232CMD_OddParity; + } + else{ + a2232_cmd |= A2232CMD_EvenParity; + } + } + else a2232_cmd |= A2232CMD_NoParity; + + + /* Hmm. Maybe an own a2232_port structure + member would be cleaner? */ + if (cflag & CLOCAL) + port->gs.flags &= ~ASYNC_CHECK_CD; + else + port->gs.flags |= ASYNC_CHECK_CD; + + + /* Now we have all parameters and can go to set them: */ + local_irq_save(flags); + + status->Param = a2232_param | A2232PARAM_RcvBaud; + status->Command = a2232_cmd | A2232CMD_Open | A2232CMD_Enable; + status->SoftFlow = softflow; + status->OutDisable = 0; + status->Setup = -1; + + local_irq_restore(flags); + return 0; +} + +static int a2232_chars_in_buffer(void *ptr) +{ + struct a2232_port *port; + volatile struct a2232status *status; + unsigned char ret; /* we need modulo-256 arithmetics */ + port = ptr; + status = a2232stat(port->which_a2232, port->which_port_on_a2232); +#if A2232_IOBUFLEN != 256 +#error "Re-Implement a2232_chars_in_buffer()!" +#endif + ret = (status->OutHead - status->OutTail); + return ret; +} + +static void a2232_close(void *ptr) +{ + a2232_disable_tx_interrupts(ptr); + a2232_disable_rx_interrupts(ptr); + /* see the comment in a2232_shutdown_port above. */ +} + +static void a2232_hungup(void *ptr) +{ + a2232_close(ptr); +} +/*** END OF REAL_DRIVER FUNCTIONS ***/ + +/*** BEGIN FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ +static int a2232_ioctl( struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return -ENOIOCTLCMD; +} + +static void a2232_throttle(struct tty_struct *tty) +{ +/* Throttle: System cannot take another chars: Drop RTS or + send the STOP char or whatever. + The A2232 firmware does RTS/CTS anyway, and XON/XOFF + if switched on. So the only thing we can do at this + layer here is not taking any characters out of the + A2232 buffer any more. */ + struct a2232_port *port = (struct a2232_port *) tty->driver_data; + port->throttle_input = -1; +} + +static void a2232_unthrottle(struct tty_struct *tty) +{ +/* Unthrottle: dual to "throttle()" above. */ + struct a2232_port *port = (struct a2232_port *) tty->driver_data; + port->throttle_input = 0; +} + +static int a2232_open(struct tty_struct * tty, struct file * filp) +{ +/* More or less stolen from other drivers. */ + int line; + int retval; + struct a2232_port *port; + + line = tty->index; + port = &a2232_ports[line]; + + tty->driver_data = port; + port->gs.tty = tty; + port->gs.count++; + retval = gs_init_port(&port->gs); + if (retval) { + port->gs.count--; + return retval; + } + port->gs.flags |= GS_ACTIVE; + retval = gs_block_til_ready(port, filp); + + if (retval) { + port->gs.count--; + return retval; + } + + a2232_enable_rx_interrupts(port); + + return 0; +} +/*** END OF FUNCTIONS EXPECTED BY TTY DRIVER STRUCTS ***/ + +static irqreturn_t a2232_vbl_inter(int irq, void *data, struct pt_regs *fp) +{ +#if A2232_IOBUFLEN != 256 +#error "Re-Implement a2232_vbl_inter()!" +#endif + +struct a2232_port *port; +volatile struct a2232memory *mem; +volatile struct a2232status *status; +unsigned char newhead; +unsigned char bufpos; /* Must be unsigned char. We need the modulo-256 arithmetics */ +unsigned char ncd, ocd, ccd; /* names consistent with the NetBSD driver */ +volatile u_char *ibuf, *cbuf, *obuf; +int ch, err, n, p; + for (n = 0; n < nr_a2232; n++){ /* for every completely initialized A2232 board */ + mem = a2232mem(n); + for (p = 0; p < NUMLINES; p++){ /* for every port on this board */ + err = 0; + port = &a2232_ports[n*NUMLINES+p]; + if ( port->gs.flags & GS_ACTIVE ){ /* if the port is used */ + + status = a2232stat(n,p); + + if (!port->disable_rx && !port->throttle_input){ /* If input is not disabled */ + newhead = status->InHead; /* 65EC02 write pointer */ + bufpos = status->InTail; + + /* check for input for this port */ + if (newhead != bufpos) { + /* buffer for input chars/events */ + ibuf = mem->InBuf[p]; + + /* data types of bytes in ibuf */ + cbuf = mem->InCtl[p]; + + /* do for all chars */ + while (bufpos != newhead) { + /* which type of input data? */ + switch (cbuf[bufpos]) { + /* switch on input event (CD, BREAK, etc.) */ + case A2232INCTL_EVENT: + switch (ibuf[bufpos++]) { + case A2232EVENT_Break: + /* TODO: Handle BREAK signal */ + break; + /* A2232EVENT_CarrierOn and A2232EVENT_CarrierOff are + handled in a separate queue and should not occur here. */ + case A2232EVENT_Sync: + printk("A2232: 65EC02 software sent SYNC event, don't know what to do. Ignoring."); + break; + default: + printk("A2232: 65EC02 software broken, unknown event type %d occurred.\n",ibuf[bufpos-1]); + } /* event type switch */ + break; + case A2232INCTL_CHAR: + /* Receive incoming char */ + a2232_receive_char(port, ibuf[bufpos], err); + bufpos++; + break; + default: + printk("A2232: 65EC02 software broken, unknown data type %d occurred.\n",cbuf[bufpos]); + bufpos++; + } /* switch on input data type */ + } /* while there's something in the buffer */ + + status->InTail = bufpos; /* tell 65EC02 what we've read */ + + } /* if there was something in the buffer */ + } /* If input is not disabled */ + + /* Now check if there's something to output */ + obuf = mem->OutBuf[p]; + bufpos = status->OutHead; + while ( (port->gs.xmit_cnt > 0) && + (!port->gs.tty->stopped) && + (!port->gs.tty->hw_stopped) ){ /* While there are chars to transmit */ + if (((bufpos+1) & A2232_IOBUFLENMASK) != status->OutTail) { /* If the A2232 buffer is not full */ + ch = port->gs.xmit_buf[port->gs.xmit_tail]; /* get the next char to transmit */ + port->gs.xmit_tail = (port->gs.xmit_tail+1) & (SERIAL_XMIT_SIZE-1); /* modulo-addition for the gs.xmit_buf ring-buffer */ + obuf[bufpos++] = ch; /* put it into the A2232 buffer */ + port->gs.xmit_cnt--; + } + else{ /* If A2232 the buffer is full */ + break; /* simply stop filling it. */ + } + } + status->OutHead = bufpos; + + /* WakeUp if output buffer runs low */ + if ((port->gs.xmit_cnt <= port->gs.wakeup_chars) && port->gs.tty) { + tty_wakeup(port->gs.tty); + } + } // if the port is used + } // for every port on the board + + /* Now check the CD message queue */ + newhead = mem->Common.CDHead; + bufpos = mem->Common.CDTail; + if (newhead != bufpos){ /* There are CD events in queue */ + ocd = mem->Common.CDStatus; /* get old status bits */ + while (newhead != bufpos){ /* read all events */ + ncd = mem->CDBuf[bufpos++]; /* get one event */ + ccd = ncd ^ ocd; /* mask of changed lines */ + ocd = ncd; /* save new status bits */ + for(p=0; p < NUMLINES; p++){ /* for all ports */ + if (ccd & 1){ /* this one changed */ + + struct a2232_port *port = &a2232_ports[n*7+p]; + port->cd_status = !(ncd & 1); /* ncd&1 <=> CD is now off */ + + if (!(port->gs.flags & ASYNC_CHECK_CD)) + ; /* Don't report DCD changes */ + else if (port->cd_status) { // if DCD on: DCD went UP! + + /* Are we blocking in open?*/ + wake_up_interruptible(&port->gs.open_wait); + } + else { // if DCD off: DCD went DOWN! + if (port->gs.tty) + tty_hangup (port->gs.tty); + } + + } // if CD changed for this port + ccd >>= 1; + ncd >>= 1; /* Shift bits for next line */ + } // for every port + } // while CD events in queue + mem->Common.CDStatus = ocd; /* save new status */ + mem->Common.CDTail = bufpos; /* remove events */ + } // if events in CD queue + + } // for every completely initialized A2232 board + return IRQ_HANDLED; +} + +static void a2232_init_portstructs(void) +{ + struct a2232_port *port; + int i; + + for (i = 0; i < MAX_A2232_BOARDS*NUMLINES; i++) { + port = a2232_ports + i; + port->which_a2232 = i/NUMLINES; + port->which_port_on_a2232 = i%NUMLINES; + port->disable_rx = port->throttle_input = port->cd_status = 0; + port->gs.magic = A2232_MAGIC; + port->gs.close_delay = HZ/2; + port->gs.closing_wait = 30 * HZ; + port->gs.rd = &a2232_real_driver; +#ifdef NEW_WRITE_LOCKING + init_MUTEX(&(port->gs.port_write_sem)); +#endif + init_waitqueue_head(&port->gs.open_wait); + init_waitqueue_head(&port->gs.close_wait); + } +} + +static struct tty_operations a2232_ops = { + .open = a2232_open, + .close = gs_close, + .write = gs_write, + .put_char = gs_put_char, + .flush_chars = gs_flush_chars, + .write_room = gs_write_room, + .chars_in_buffer = gs_chars_in_buffer, + .flush_buffer = gs_flush_buffer, + .ioctl = a2232_ioctl, + .throttle = a2232_throttle, + .unthrottle = a2232_unthrottle, + .set_termios = gs_set_termios, + .stop = gs_stop, + .start = gs_start, + .hangup = gs_hangup, +}; + +static int a2232_init_drivers(void) +{ + int error; + + a2232_driver = alloc_tty_driver(NUMLINES * nr_a2232); + if (!a2232_driver) + return -ENOMEM; + a2232_driver->owner = THIS_MODULE; + a2232_driver->driver_name = "commodore_a2232"; + a2232_driver->name = "ttyY"; + a2232_driver->major = A2232_NORMAL_MAJOR; + a2232_driver->type = TTY_DRIVER_TYPE_SERIAL; + a2232_driver->subtype = SERIAL_TYPE_NORMAL; + a2232_driver->init_termios = tty_std_termios; + a2232_driver->init_termios.c_cflag = + B9600 | CS8 | CREAD | HUPCL | CLOCAL; + a2232_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(a2232_driver, &a2232_ops); + if ((error = tty_register_driver(a2232_driver))) { + printk(KERN_ERR "A2232: Couldn't register A2232 driver, error = %d\n", + error); + put_tty_driver(a2232_driver); + return 1; + } + return 0; +} + +static int __init a2232board_init(void) +{ + struct zorro_dev *z; + + unsigned int boardaddr; + int bcount; + short start; + u_char *from; + volatile u_char *to; + volatile struct a2232memory *mem; + +#ifdef CONFIG_SMP + return -ENODEV; /* This driver is not SMP aware. Is there an SMP ZorroII-bus-machine? */ +#endif + + if (!MACH_IS_AMIGA){ + return -ENODEV; + } + + printk("Commodore A2232 driver initializing.\n"); /* Say that we're alive. */ + + z = NULL; + nr_a2232 = 0; + while ( (z = zorro_find_device(ZORRO_WILDCARD, z)) ){ + if ( (z->id != ZORRO_PROD_CBM_A2232_PROTOTYPE) && + (z->id != ZORRO_PROD_CBM_A2232) ){ + continue; // The board found was no A2232 + } + if (!zorro_request_device(z,"A2232 driver")) + continue; + + printk("Commodore A2232 found (#%d).\n",nr_a2232); + + zd_a2232[nr_a2232] = z; + + boardaddr = ZTWO_VADDR( z->resource.start ); + printk("Board is located at address 0x%x, size is 0x%x.\n", boardaddr, (unsigned int) ((z->resource.end+1) - (z->resource.start))); + + mem = (volatile struct a2232memory *) boardaddr; + + (void) mem->Enable6502Reset; /* copy the code across to the board */ + to = (u_char *)mem; from = a2232_65EC02code; bcount = sizeof(a2232_65EC02code) - 2; + start = *(short *)from; + from += sizeof(start); + to += start; + while(bcount--) *to++ = *from++; + printk("65EC02 software uploaded to the A2232 memory.\n"); + + mem->Common.Crystal = A2232_UNKNOWN; /* use automatic speed check */ + + /* start 6502 running */ + (void) mem->ResetBoard; + printk("A2232's 65EC02 CPU up and running.\n"); + + /* wait until speed detector has finished */ + for (bcount = 0; bcount < 2000; bcount++) { + udelay(1000); + if (mem->Common.Crystal) + break; + } + printk((mem->Common.Crystal?"A2232 oscillator crystal detected by 65EC02 software: ":"65EC02 software could not determine A2232 oscillator crystal: ")); + switch (mem->Common.Crystal){ + case A2232_UNKNOWN: + printk("Unknown crystal.\n"); + break; + case A2232_NORMAL: + printk ("Normal crystal.\n"); + break; + case A2232_TURBO: + printk ("Turbo crystal.\n"); + break; + default: + printk ("0x%x. Huh?\n",mem->Common.Crystal); + } + + nr_a2232++; + + } + + printk("Total: %d A2232 boards initialized.\n.", nr_a2232); /* Some status report if no card was found */ + + a2232_init_portstructs(); + + /* + a2232_init_drivers also registers the drivers. Must be here because all boards + have to be detected first. + */ + if (a2232_init_drivers()) return -ENODEV; // maybe we should use a different -Exxx? + + request_irq(IRQ_AMIGA_VERTB, a2232_vbl_inter, 0, "A2232 serial VBL", a2232_driver_ID); + return 0; +} + +static void __exit a2232board_exit(void) +{ + int i; + + for (i = 0; i < nr_a2232; i++) { + zorro_release_device(zd_a2232[i]); + } + + tty_unregister_driver(a2232_driver); + put_tty_driver(a2232_driver); + free_irq(IRQ_AMIGA_VERTB, a2232_driver_ID); +} + +module_init(a2232board_init); +module_exit(a2232board_exit); + +MODULE_AUTHOR("Enver Haase"); +MODULE_DESCRIPTION("Amiga A2232 multi-serial board driver"); +MODULE_LICENSE("GPL"); |