diff options
author | Alan Cox <alan@redhat.com> | 2008-07-22 10:17:16 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2008-07-22 20:03:27 (GMT) |
commit | d2fbd0f2f9f5a34831a0b8fe6b16c6e1afba1200 (patch) | |
tree | 2f2af1a3774636c2abae1a7795fa6152b37ab33d /drivers/char | |
parent | a72492bd8a8d4326fd78b2142bf7cae779d5d4c2 (diff) | |
download | linux-fsl-qoriq-d2fbd0f2f9f5a34831a0b8fe6b16c6e1afba1200.tar.xz |
specialix: Code cleanups
Go through the inlines and other oddments that are iffy. Remove various bits
of dead code and bogus debug. Turn the crtsdts compile time option into a
runtime switch.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Diffstat (limited to 'drivers/char')
-rw-r--r-- | drivers/char/Kconfig | 10 | ||||
-rw-r--r-- | drivers/char/specialix.c | 216 |
2 files changed, 44 insertions, 182 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 650e6b4..e0bbbfb 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -300,16 +300,6 @@ config SPECIALIX and compile this driver as kernel loadable module which will be called specialix. -config SPECIALIX_RTSCTS - bool "Specialix DTR/RTS pin is RTS" - depends on SPECIALIX - help - The Specialix IO8+ card can only support either RTS or DTR. If you - say N here, the driver will use the pin as "DTR" when the tty is in - software handshake mode. If you say Y here or hardware handshake is - on, it will always be RTS. Read the file - <file:Documentation/specialix.txt> for more information. - config SX tristate "Specialix SX (and SI) card support" depends on SERIAL_NONSTANDARD && (PCI || EISA || ISA) diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index c390c6c..f3184a8a 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -110,6 +110,7 @@ static int sx_debug; static int sx_rxfifo = SPECIALIX_RXFIFO; +static int sx_rtscts; #ifdef DEBUG #define dprintk(f, str...) if (sx_debug & f) printk(str) @@ -134,25 +135,12 @@ static int sx_rxfifo = SPECIALIX_RXFIFO; #define func_enter() dprintk(SX_DEBUG_FLOW, "io8: enter %s\n", __func__) #define func_exit() dprintk(SX_DEBUG_FLOW, "io8: exit %s\n", __func__) -#define jiffies_from_ms(a) ((((a) * HZ)/1000)+1) - /* Configurable options: */ /* Am I paranoid or not ? ;-) */ #define SPECIALIX_PARANOIA_CHECK -/* Do I trust the IRQ from the card? (enabeling it doesn't seem to help) - When the IRQ routine leaves the chip in a state that is keeps on - requiring attention, the timer doesn't help either. */ -#undef SPECIALIX_TIMER - -#ifdef SPECIALIX_TIMER -static int sx_poll = HZ; -#endif - - - /* * The following defines are mostly for testing purposes. But if you need * some nice reporting in your syslog, you can define them also. @@ -162,16 +150,6 @@ static int sx_poll = HZ; -#ifdef CONFIG_SPECIALIX_RTSCTS -#define SX_CRTSCTS(bla) 1 -#else -#define SX_CRTSCTS(tty) C_CRTSCTS(tty) -#endif - - -/* Used to be outb(0xff, 0x80); */ -#define short_pause() udelay(1) - #define SPECIALIX_LEGAL_FLAGS \ (ASYNC_HUP_NOTIFY | ASYNC_SAK | ASYNC_SPLIT_TERMIOS | \ @@ -190,14 +168,7 @@ static struct specialix_board sx_board[SX_NBOARD] = { static struct specialix_port sx_port[SX_NBOARD * SX_NPORT]; -#ifdef SPECIALIX_TIMER -static struct timer_list missed_irq_timer; -static irqreturn_t sx_interrupt(int irq, void *dev_id); -#endif - - - -static inline int sx_paranoia_check(struct specialix_port const *port, +static int sx_paranoia_check(struct specialix_port const *port, char *name, const char *routine) { #ifdef SPECIALIX_PARANOIA_CHECK @@ -288,7 +259,7 @@ static inline void sx_out_off(struct specialix_board *bp, /* Wait for Channel Command Register ready */ -static inline void sx_wait_CCR(struct specialix_board *bp) +static void sx_wait_CCR(struct specialix_board *bp) { unsigned long delay, flags; unsigned char ccr; @@ -307,7 +278,7 @@ static inline void sx_wait_CCR(struct specialix_board *bp) /* Wait for Channel Command Register ready */ -static inline void sx_wait_CCR_off(struct specialix_board *bp) +static void sx_wait_CCR_off(struct specialix_board *bp) { unsigned long delay; unsigned char crr; @@ -330,7 +301,7 @@ static inline void sx_wait_CCR_off(struct specialix_board *bp) * specialix IO8+ IO range functions. */ -static inline int sx_request_io_range(struct specialix_board *bp) +static int sx_request_io_range(struct specialix_board *bp) { return request_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE, @@ -338,7 +309,7 @@ static inline int sx_request_io_range(struct specialix_board *bp) } -static inline void sx_release_io_range(struct specialix_board *bp) +static void sx_release_io_range(struct specialix_board *bp) { release_region(bp->base, bp->flags & SX_BOARD_IS_PCI ? SX_PCI_IO_SPACE : SX_IO_SPACE); @@ -440,36 +411,10 @@ static int read_cross_byte(struct specialix_board *bp, int reg, int bit) } -#ifdef SPECIALIX_TIMER -void missed_irq(unsigned long data) -{ - unsigned char irq; - unsigned long flags; - struct specialix_board *bp = (struct specialix_board *)data; - - spin_lock_irqsave(&bp->lock, flags); - irq = sx_in((struct specialix_board *)data, CD186x_SRSR) & - (SRSR_RREQint | SRSR_TREQint | SRSR_MREQint); - spin_unlock_irqrestore(&bp->lock, flags); - if (irq) { - printk(KERN_INFO - "Missed interrupt... Calling int from timer. \n"); - sx_interrupt(-1, bp); - } - mod_timer(&missed_irq_timer, jiffies + sx_poll); -} -#endif - - - /* Main probing routine, also sets irq. */ static int sx_probe(struct specialix_board *bp) { unsigned char val1, val2; -#if 0 - int irqs = 0; - int retries; -#endif int rev; int chip; @@ -482,15 +427,15 @@ static int sx_probe(struct specialix_board *bp) /* Are the I/O ports here ? */ sx_out_off(bp, CD186x_PPRL, 0x5a); - short_pause(); + udelay(1); val1 = sx_in_off(bp, CD186x_PPRL); sx_out_off(bp, CD186x_PPRL, 0xa5); - short_pause(); + udelay(1); val2 = sx_in_off(bp, CD186x_PPRL); - if ((val1 != 0x5a) || (val2 != 0xa5)) { + if (val1 != 0x5a || val2 != 0xa5) { printk(KERN_INFO "sx%d: specialix IO8+ Board at 0x%03x not found.\n", board_No(bp), bp->base); @@ -522,50 +467,6 @@ static int sx_probe(struct specialix_board *bp) } -#if 0 - /* It's time to find IRQ for this board */ - for (retries = 0; retries < 5 && irqs <= 0; retries++) { - irqs = probe_irq_on(); - sx_init_CD186x(bp); /* Reset CD186x chip */ - sx_out(bp, CD186x_CAR, 2); /* Select port 2 */ - sx_wait_CCR(bp); - sx_out(bp, CD186x_CCR, CCR_TXEN); /* Enable transmitter */ - sx_out(bp, CD186x_IER, IER_TXRDY); /* Enable tx empty intr */ - msleep(50); - irqs = probe_irq_off(irqs); - - dprintk(SX_DEBUG_INIT, "SRSR = %02x, ", sx_in(bp, CD186x_SRSR)); - dprintk(SX_DEBUG_INIT, "TRAR = %02x, ", sx_in(bp, CD186x_TRAR)); - dprintk(SX_DEBUG_INIT, "GIVR = %02x, ", sx_in(bp, CD186x_GIVR)); - dprintk(SX_DEBUG_INIT, "GICR = %02x, ", sx_in(bp, CD186x_GICR)); - dprintk(SX_DEBUG_INIT, "\n"); - - /* Reset CD186x again */ - if (!sx_init_CD186x(bp)) { - /* Hmmm. This is dead code anyway. */ - } - - dprintk(SX_DEBUG_INIT - "val1 = %02x, val2 = %02x, val3 = %02x.\n", - val1, val2, val3); - - } - -#if 0 - if (irqs <= 0) { - printk(KERN_ERR - "sx%d: Can't find IRQ for specialix IO8+ board at 0x%03x.\n", - board_No(bp), bp->base); - sx_release_io_range(bp); - func_exit(); - return 1; - } -#endif - printk(KERN_INFO "Started with irq=%d, but now have irq=%d.\n", - bp->irq, irqs); - if (irqs > 0) - bp->irq = irqs; -#endif /* Reset CD186x again */ if (!sx_init_CD186x(bp)) { sx_release_io_range(bp); @@ -610,11 +511,6 @@ static int sx_probe(struct specialix_board *bp) dprintk(SX_DEBUG_INIT, " GFCR = 0x%02x\n", sx_in_off(bp, CD186x_GFRCR)); -#ifdef SPECIALIX_TIMER - setup_timer(&missed_irq_timer, missed_irq, (unsigned long)bp); - mod_timer(&missed_irq_timer, jiffies + sx_poll); -#endif - printk(KERN_INFO "sx%d: specialix IO8+ board detected at 0x%03x, IRQ %d, CD%d Rev. %c.\n", board_No(bp), bp->base, bp->irq, chip, rev); @@ -628,7 +524,7 @@ static int sx_probe(struct specialix_board *bp) * Interrupt processing routines. * */ -static inline struct specialix_port *sx_get_port(struct specialix_board *bp, +static struct specialix_port *sx_get_port(struct specialix_board *bp, unsigned char const *what) { unsigned char channel; @@ -654,7 +550,7 @@ static inline struct specialix_port *sx_get_port(struct specialix_board *bp, } -static inline void sx_receive_exc(struct specialix_board *bp) +static void sx_receive_exc(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; @@ -729,7 +625,7 @@ static inline void sx_receive_exc(struct specialix_board *bp) } -static inline void sx_receive(struct specialix_board *bp) +static void sx_receive(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; @@ -758,7 +654,7 @@ static inline void sx_receive(struct specialix_board *bp) } -static inline void sx_transmit(struct specialix_board *bp) +static void sx_transmit(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; @@ -838,7 +734,7 @@ static inline void sx_transmit(struct specialix_board *bp) } -static inline void sx_check_modem(struct specialix_board *bp) +static void sx_check_modem(struct specialix_board *bp) { struct specialix_port *port; struct tty_struct *tty; @@ -853,7 +749,6 @@ static inline void sx_check_modem(struct specialix_board *bp) tty = port->port.tty; mcr = sx_in(bp, CD186x_MCR); - printk("mcr = %02x.\n", mcr); /* FIXME */ if ((mcr & MCR_CDCHG)) { dprintk(SX_DEBUG_SIGNALS, "CD just changed... "); @@ -983,13 +878,6 @@ static void turn_ints_off(struct specialix_board *bp) unsigned long flags; func_enter(); - if (bp->flags & SX_BOARD_IS_PCI) { - /* This was intended for enabeling the interrupt on the - * PCI card. However it seems that it's already enabled - * and as PCI interrupts can be shared, there is no real - * reason to have to turn it off. */ - } - spin_lock_irqsave(&bp->lock, flags); (void) sx_in_off(bp, 0); /* Turn off interrupts. */ spin_unlock_irqrestore(&bp->lock, flags); @@ -1003,9 +891,6 @@ static void turn_ints_on(struct specialix_board *bp) func_enter(); - if (bp->flags & SX_BOARD_IS_PCI) { - /* play with the PCI chip. See comment above. */ - } spin_lock_irqsave(&bp->lock, flags); (void) sx_in(bp, 0); /* Turn ON interrupts. */ spin_unlock_irqrestore(&bp->lock, flags); @@ -1015,7 +900,7 @@ static void turn_ints_on(struct specialix_board *bp) /* Called with disabled interrupts */ -static inline int sx_setup_board(struct specialix_board *bp) +static int sx_setup_board(struct specialix_board *bp) { int error; @@ -1040,7 +925,7 @@ static inline int sx_setup_board(struct specialix_board *bp) /* Called with disabled interrupts */ -static inline void sx_shutdown_board(struct specialix_board *bp) +static void sx_shutdown_board(struct specialix_board *bp) { func_enter(); @@ -1058,6 +943,12 @@ static inline void sx_shutdown_board(struct specialix_board *bp) func_exit(); } +static unsigned int sx_crtscts(struct tty_struct *tty) +{ + if (sx_rtscts) + return C_CRTSCTS(tty); + return 1; +} /* * Setting up port characteristics. @@ -1090,7 +981,7 @@ static void sx_change_speed(struct specialix_board *bp, /* The Specialix board doens't implement the RTS lines. They are used to set the IRQ level. Don't touch them. */ - if (SX_CRTSCTS(tty)) + if (sx_crtscts(tty)) port->MSVR = MSVR_DTR | (sx_in(bp, CD186x_MSVR) & MSVR_RTS); else port->MSVR = (sx_in(bp, CD186x_MSVR) & MSVR_RTS); @@ -1108,7 +999,7 @@ static void sx_change_speed(struct specialix_board *bp, if (!baud) { /* Drop DTR & exit */ dprintk(SX_DEBUG_TERMIOS, "Dropping DTR... Hmm....\n"); - if (!SX_CRTSCTS(tty)) { + if (!sx_crtscts(tty)) { port->MSVR &= ~MSVR_DTR; spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_MSVR, port->MSVR); @@ -1118,7 +1009,7 @@ static void sx_change_speed(struct specialix_board *bp, return; } else { /* Set DTR on */ - if (!SX_CRTSCTS(tty)) + if (!sx_crtscts(tty)) port->MSVR |= MSVR_DTR; } @@ -1448,7 +1339,7 @@ static int block_til_ready(struct tty_struct *tty, struct file *filp, spin_lock_irqsave(&bp->lock, flags); sx_out(bp, CD186x_CAR, port_No(port)); CD = sx_in(bp, CD186x_MSVR) & MSVR_CD; - if (SX_CRTSCTS(tty)) { + if (sx_crtscts(tty)) { /* Activate RTS */ port->MSVR |= MSVR_DTR; /* WTF? */ sx_out(bp, CD186x_MSVR, port->MSVR); @@ -1600,7 +1491,7 @@ static void sx_close(struct tty_struct *tty, struct file *filp) } bp = port_Board(port); - if ((tty->count == 1) && (port->port.count != 1)) { + if (tty->count == 1 && port->port.count != 1) { printk(KERN_ERR "sx%d: sx_close: bad port count;" " tty->count is 1, port count is %d\n", board_No(bp), port->port.count); @@ -1868,17 +1759,15 @@ static int sx_tiocmget(struct tty_struct *tty, struct file *file) dprintk(SX_DEBUG_INIT, "Got msvr[%d] = %02x, car = %d.\n", port_No(port), status, sx_in(bp, CD186x_CAR)); dprintk(SX_DEBUG_INIT, "sx_port = %p, port = %p\n", sx_port, port); - if (SX_CRTSCTS(port->port.tty)) { - result = /* (status & MSVR_RTS) ? */ TIOCM_DTR /* : 0) */ + if (sx_crtscts(port->port.tty)) { + result = TIOCM_DTR | TIOCM_DSR | ((status & MSVR_DTR) ? TIOCM_RTS : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) - |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */ | ((status & MSVR_CTS) ? TIOCM_CTS : 0); } else { - result = /* (status & MSVR_RTS) ? */ TIOCM_RTS /* : 0) */ + result = TIOCM_RTS | TIOCM_DSR | ((status & MSVR_DTR) ? TIOCM_DTR : 0) | ((status & MSVR_CD) ? TIOCM_CAR : 0) - |/* ((status & MSVR_DSR) ? */ TIOCM_DSR /* : 0) */ | ((status & MSVR_CTS) ? TIOCM_CTS : 0); } @@ -1905,24 +1794,14 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file, bp = port_Board(port); spin_lock_irqsave(&port->lock, flags); - /* if (set & TIOCM_RTS) - port->MSVR |= MSVR_RTS; */ - /* if (set & TIOCM_DTR) - port->MSVR |= MSVR_DTR; */ - - if (SX_CRTSCTS(port->port.tty)) { + if (sx_crtscts(port->port.tty)) { if (set & TIOCM_RTS) port->MSVR |= MSVR_DTR; } else { if (set & TIOCM_DTR) port->MSVR |= MSVR_DTR; } - - /* if (clear & TIOCM_RTS) - port->MSVR &= ~MSVR_RTS; */ - /* if (clear & TIOCM_DTR) - port->MSVR &= ~MSVR_DTR; */ - if (SX_CRTSCTS(port->port.tty)) { + if (sx_crtscts(port->port.tty)) { if (clear & TIOCM_RTS) port->MSVR &= ~MSVR_DTR; } else { @@ -1939,7 +1818,7 @@ static int sx_tiocmset(struct tty_struct *tty, struct file *file, } -static inline void sx_send_break(struct specialix_port *port, +static void sx_send_break(struct specialix_port *port, unsigned long length) { struct specialix_board *bp = port_Board(port); @@ -1967,7 +1846,7 @@ static inline void sx_send_break(struct specialix_port *port, } -static inline int sx_set_serial_info(struct specialix_port *port, +static int sx_set_serial_info(struct specialix_port *port, struct serial_struct __user *newinfo) { struct serial_struct tmp; @@ -2015,7 +1894,7 @@ static inline int sx_set_serial_info(struct specialix_port *port, } -static inline int sx_get_serial_info(struct specialix_port *port, +static int sx_get_serial_info(struct specialix_port *port, struct serial_struct __user *retinfo) { struct serial_struct tmp; @@ -2112,7 +1991,7 @@ static void sx_throttle(struct tty_struct *tty) bp = port_Board(port); /* Use DTR instead of RTS ! */ - if (SX_CRTSCTS(tty)) + if (sx_crtscts(tty)) port->MSVR &= ~MSVR_DTR; else { /* Auch!!! I think the system shouldn't call this then. */ @@ -2158,7 +2037,7 @@ static void sx_unthrottle(struct tty_struct *tty) spin_lock_irqsave(&port->lock, flags); /* XXXX Use DTR INSTEAD???? */ - if (SX_CRTSCTS(tty)) + if (sx_crtscts(tty)) port->MSVR |= MSVR_DTR; /* Else clause: see remark in "sx_throttle"... */ spin_lock_irqsave(&bp->lock, flags); @@ -2381,11 +2260,11 @@ static int __init specialix_init(void) printk(KERN_INFO "sx: Specialix IO8+ driver v" VERSION ", (c) R.E.Wolff 1997/1998.\n"); printk(KERN_INFO "sx: derived from work (c) D.Gorodchanin 1994-1996.\n"); -#ifdef CONFIG_SPECIALIX_RTSCTS - printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); -#else - printk(KERN_INFO "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); -#endif + if (sx_rtscts) + printk(KERN_INFO + "sx: DTR/RTS pin is RTS when CRTSCTS is on.\n"); + else + printk(KERN_INFO "sx: DTR/RTS pin is always RTS.\n"); for (i = 0; i < SX_NBOARD; i++) spin_lock_init(&sx_board[i].lock); @@ -2443,16 +2322,13 @@ static int __init specialix_init(void) } static int iobase[SX_NBOARD] = {0,}; - -static int irq [SX_NBOARD] = {0,}; +static int irq[SX_NBOARD] = {0,}; module_param_array(iobase, int, NULL, 0); module_param_array(irq, int, NULL, 0); module_param(sx_debug, int, 0); +module_param(sx_rtscts, int, 0); module_param(sx_rxfifo, int, 0); -#ifdef SPECIALIX_TIMER -module_param(sx_poll, int, 0); -#endif /* * You can setup up to 4 boards. @@ -2492,10 +2368,6 @@ static void __exit specialix_exit_module(void) for (i = 0; i < SX_NBOARD; i++) if (sx_board[i].flags & SX_BOARD_PRESENT) sx_release_io_range(&sx_board[i]); -#ifdef SPECIALIX_TIMER - del_timer_sync(&missed_irq_timer); -#endif - func_exit(); } |