diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-02 20:43:38 (GMT) |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2013-07-02 20:43:38 (GMT) |
| commit | 3883cbb6c1bda013a3ce2dbdab7dc97c52e4a232 (patch) | |
| tree | 5b69f83b049d24ac81123ac954ca8c9128e48443 /drivers/clk | |
| parent | d2033f2c1d1de2239ded15e478ddb4028f192a15 (diff) | |
| parent | 1eb92b24e243085d242cf5ffd64829bba70972e1 (diff) | |
| download | linux-fsl-qoriq-3883cbb6c1bda013a3ce2dbdab7dc97c52e4a232.tar.xz | |
Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC specific changes from Arnd Bergmann:
"These changes are all to SoC-specific code, a total of 33 branches on
17 platforms were pulled into this. Like last time, Renesas sh-mobile
is now the platform with the most changes, followed by OMAP and
EXYNOS.
Two new platforms, TI Keystone and Rockchips RK3xxx are added in this
branch, both containing almost no platform specific code at all, since
they are using generic subsystem interfaces for clocks, pinctrl,
interrupts etc. The device drivers are getting merged through the
respective subsystem maintainer trees.
One more SoC (u300) is now multiplatform capable and several others
(shmobile, exynos, msm, integrator, kirkwood, clps711x) are moving
towards that goal with this series but need more work.
Also noteworthy is the work on PCI here, which is traditionally part
of the SoC specific code. With the changes done by Thomas Petazzoni,
we can now more easily have PCI host controller drivers as loadable
modules and keep them separate from the platform code in
drivers/pci/host. This has already led to the discovery that three
platforms (exynos, spear and imx) are actually using an identical PCIe
host controller and will be able to share a driver once support for
spear and imx is added."
* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (480 commits)
ARM: integrator: let pciv3 use mem/premem from device tree
ARM: integrator: set local side PCI addresses right
ARM: dts: Add pcie controller node for exynos5440-ssdk5440
ARM: dts: Add pcie controller node for Samsung EXYNOS5440 SoC
ARM: EXYNOS: Enable PCIe support for Exynos5440
pci: Add PCIe driver for Samsung Exynos
ARM: OMAP5: voltagedomain data: remove temporary OMAP4 voltage data
ARM: keystone: Move CPU bringup code to dedicated asm file
ARM: multiplatform: always pick one CPU type
ARM: imx: select syscon for IMX6SL
ARM: keystone: select ARM_ERRATA_798181 only for SMP
ARM: imx: Synertronixx scb9328 needs to select SOC_IMX1
ARM: OMAP2+: AM43x: resolve SMP related build error
dmaengine: edma: enable build for AM33XX
ARM: edma: Add EDMA crossbar event mux support
ARM: edma: Add DT and runtime PM support to the private EDMA API
dmaengine: edma: Add TI EDMA device tree binding
arm: add basic support for Rockchip RK3066a boards
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: Add basic clocks for Rockchip rk3066a SoCs
...
Diffstat (limited to 'drivers/clk')
| -rw-r--r-- | drivers/clk/Makefile | 2 | ||||
| -rw-r--r-- | drivers/clk/clk-u300.c | 718 | ||||
| -rw-r--r-- | drivers/clk/clk-zynq.c | 378 | ||||
| -rw-r--r-- | drivers/clk/mvebu/Kconfig | 25 | ||||
| -rw-r--r-- | drivers/clk/mvebu/Makefile | 8 | ||||
| -rw-r--r-- | drivers/clk/mvebu/armada-370.c | 176 | ||||
| -rw-r--r-- | drivers/clk/mvebu/armada-xp.c | 210 | ||||
| -rw-r--r-- | drivers/clk/mvebu/clk-core.c | 675 | ||||
| -rw-r--r-- | drivers/clk/mvebu/clk-core.h | 18 | ||||
| -rw-r--r-- | drivers/clk/mvebu/clk-gating-ctrl.c | 250 | ||||
| -rw-r--r-- | drivers/clk/mvebu/clk-gating-ctrl.h | 22 | ||||
| -rw-r--r-- | drivers/clk/mvebu/clk.c | 23 | ||||
| -rw-r--r-- | drivers/clk/mvebu/common.c | 163 | ||||
| -rw-r--r-- | drivers/clk/mvebu/common.h | 48 | ||||
| -rw-r--r-- | drivers/clk/mvebu/dove.c | 194 | ||||
| -rw-r--r-- | drivers/clk/mvebu/kirkwood.c | 247 | ||||
| -rw-r--r-- | drivers/clk/socfpga/clk.c | 194 | ||||
| -rw-r--r-- | drivers/clk/tegra/clk-tegra114.c | 23 | ||||
| -rw-r--r-- | drivers/clk/zynq/Makefile | 3 | ||||
| -rw-r--r-- | drivers/clk/zynq/clkc.c | 533 | ||||
| -rw-r--r-- | drivers/clk/zynq/pll.c | 235 |
21 files changed, 2626 insertions, 1519 deletions
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index f0e4699..f9cf708 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -27,7 +27,7 @@ obj-$(CONFIG_MACH_LOONGSON1) += clk-ls1x.o obj-$(CONFIG_ARCH_SUNXI) += sunxi/ obj-$(CONFIG_ARCH_U8500) += ux500/ obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o -obj-$(CONFIG_ARCH_ZYNQ) += clk-zynq.o +obj-$(CONFIG_ARCH_ZYNQ) += zynq/ obj-$(CONFIG_ARCH_TEGRA) += tegra/ obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ diff --git a/drivers/clk/clk-u300.c b/drivers/clk/clk-u300.c index a15f792..8774e05 100644 --- a/drivers/clk/clk-u300.c +++ b/drivers/clk/clk-u300.c @@ -11,7 +11,349 @@ #include <linux/io.h> #include <linux/clk-provider.h> #include <linux/spinlock.h> -#include <mach/syscon.h> +#include <linux/of.h> + +/* APP side SYSCON registers */ +/* CLK Control Register 16bit (R/W) */ +#define U300_SYSCON_CCR (0x0000) +#define U300_SYSCON_CCR_I2S1_USE_VCXO (0x0040) +#define U300_SYSCON_CCR_I2S0_USE_VCXO (0x0020) +#define U300_SYSCON_CCR_TURN_VCXO_ON (0x0008) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_MASK (0x0007) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW_POWER (0x04) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_LOW (0x03) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_INTERMEDIATE (0x02) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_HIGH (0x01) +#define U300_SYSCON_CCR_CLKING_PERFORMANCE_BEST (0x00) +/* CLK Status Register 16bit (R/W) */ +#define U300_SYSCON_CSR (0x0004) +#define U300_SYSCON_CSR_PLL208_LOCK_IND (0x0002) +#define U300_SYSCON_CSR_PLL13_LOCK_IND (0x0001) +/* Reset lines for SLOW devices 16bit (R/W) */ +#define U300_SYSCON_RSR (0x0014) +#define U300_SYSCON_RSR_PPM_RESET_EN (0x0200) +#define U300_SYSCON_RSR_ACC_TMR_RESET_EN (0x0100) +#define U300_SYSCON_RSR_APP_TMR_RESET_EN (0x0080) +#define U300_SYSCON_RSR_RTC_RESET_EN (0x0040) +#define U300_SYSCON_RSR_KEYPAD_RESET_EN (0x0020) +#define U300_SYSCON_RSR_GPIO_RESET_EN (0x0010) +#define U300_SYSCON_RSR_EH_RESET_EN (0x0008) +#define U300_SYSCON_RSR_BTR_RESET_EN (0x0004) +#define U300_SYSCON_RSR_UART_RESET_EN (0x0002) +#define U300_SYSCON_RSR_SLOW_BRIDGE_RESET_EN (0x0001) +/* Reset lines for FAST devices 16bit (R/W) */ +#define U300_SYSCON_RFR (0x0018) +#define U300_SYSCON_RFR_UART1_RESET_ENABLE (0x0080) +#define U300_SYSCON_RFR_SPI_RESET_ENABLE (0x0040) +#define U300_SYSCON_RFR_MMC_RESET_ENABLE (0x0020) +#define U300_SYSCON_RFR_PCM_I2S1_RESET_ENABLE (0x0010) +#define U300_SYSCON_RFR_PCM_I2S0_RESET_ENABLE (0x0008) +#define U300_SYSCON_RFR_I2C1_RESET_ENABLE (0x0004) +#define U300_SYSCON_RFR_I2C0_RESET_ENABLE (0x0002) +#define U300_SYSCON_RFR_FAST_BRIDGE_RESET_ENABLE (0x0001) +/* Reset lines for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_RRR (0x001c) +#define U300_SYSCON_RRR_CDS_RESET_EN (0x4000) +#define U300_SYSCON_RRR_ISP_RESET_EN (0x2000) +#define U300_SYSCON_RRR_INTCON_RESET_EN (0x1000) +#define U300_SYSCON_RRR_MSPRO_RESET_EN (0x0800) +#define U300_SYSCON_RRR_XGAM_RESET_EN (0x0100) +#define U300_SYSCON_RRR_XGAM_VC_SYNC_RESET_EN (0x0080) +#define U300_SYSCON_RRR_NANDIF_RESET_EN (0x0040) +#define U300_SYSCON_RRR_EMIF_RESET_EN (0x0020) +#define U300_SYSCON_RRR_DMAC_RESET_EN (0x0010) +#define U300_SYSCON_RRR_CPU_RESET_EN (0x0008) +#define U300_SYSCON_RRR_APEX_RESET_EN (0x0004) +#define U300_SYSCON_RRR_AHB_RESET_EN (0x0002) +#define U300_SYSCON_RRR_AAIF_RESET_EN (0x0001) +/* Clock enable for SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CESR (0x0020) +#define U300_SYSCON_CESR_PPM_CLK_EN (0x0200) +#define U300_SYSCON_CESR_ACC_TMR_CLK_EN (0x0100) +#define U300_SYSCON_CESR_APP_TMR_CLK_EN (0x0080) +#define U300_SYSCON_CESR_KEYPAD_CLK_EN (0x0040) +#define U300_SYSCON_CESR_GPIO_CLK_EN (0x0010) +#define U300_SYSCON_CESR_EH_CLK_EN (0x0008) +#define U300_SYSCON_CESR_BTR_CLK_EN (0x0004) +#define U300_SYSCON_CESR_UART_CLK_EN (0x0002) +#define U300_SYSCON_CESR_SLOW_BRIDGE_CLK_EN (0x0001) +/* Clock enable for FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CEFR (0x0024) +#define U300_SYSCON_CEFR_UART1_CLK_EN (0x0200) +#define U300_SYSCON_CEFR_I2S1_CORE_CLK_EN (0x0100) +#define U300_SYSCON_CEFR_I2S0_CORE_CLK_EN (0x0080) +#define U300_SYSCON_CEFR_SPI_CLK_EN (0x0040) +#define U300_SYSCON_CEFR_MMC_CLK_EN (0x0020) +#define U300_SYSCON_CEFR_I2S1_CLK_EN (0x0010) +#define U300_SYSCON_CEFR_I2S0_CLK_EN (0x0008) +#define U300_SYSCON_CEFR_I2C1_CLK_EN (0x0004) +#define U300_SYSCON_CEFR_I2C0_CLK_EN (0x0002) +#define U300_SYSCON_CEFR_FAST_BRIDGE_CLK_EN (0x0001) +/* Clock enable for the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CERR (0x0028) +#define U300_SYSCON_CERR_CDS_CLK_EN (0x2000) +#define U300_SYSCON_CERR_ISP_CLK_EN (0x1000) +#define U300_SYSCON_CERR_MSPRO_CLK_EN (0x0800) +#define U300_SYSCON_CERR_AHB_SUBSYS_BRIDGE_CLK_EN (0x0400) +#define U300_SYSCON_CERR_SEMI_CLK_EN (0x0200) +#define U300_SYSCON_CERR_XGAM_CLK_EN (0x0100) +#define U300_SYSCON_CERR_VIDEO_ENC_CLK_EN (0x0080) +#define U300_SYSCON_CERR_NANDIF_CLK_EN (0x0040) +#define U300_SYSCON_CERR_EMIF_CLK_EN (0x0020) +#define U300_SYSCON_CERR_DMAC_CLK_EN (0x0010) +#define U300_SYSCON_CERR_CPU_CLK_EN (0x0008) +#define U300_SYSCON_CERR_APEX_CLK_EN (0x0004) +#define U300_SYSCON_CERR_AHB_CLK_EN (0x0002) +#define U300_SYSCON_CERR_AAIF_CLK_EN (0x0001) +/* Single block clock enable 16bit (-/W) */ +#define U300_SYSCON_SBCER (0x002c) +#define U300_SYSCON_SBCER_PPM_CLK_EN (0x0009) +#define U300_SYSCON_SBCER_ACC_TMR_CLK_EN (0x0008) +#define U300_SYSCON_SBCER_APP_TMR_CLK_EN (0x0007) +#define U300_SYSCON_SBCER_KEYPAD_CLK_EN (0x0006) +#define U300_SYSCON_SBCER_GPIO_CLK_EN (0x0004) +#define U300_SYSCON_SBCER_EH_CLK_EN (0x0003) +#define U300_SYSCON_SBCER_BTR_CLK_EN (0x0002) +#define U300_SYSCON_SBCER_UART_CLK_EN (0x0001) +#define U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN (0x0000) +#define U300_SYSCON_SBCER_UART1_CLK_EN (0x0019) +#define U300_SYSCON_SBCER_I2S1_CORE_CLK_EN (0x0018) +#define U300_SYSCON_SBCER_I2S0_CORE_CLK_EN (0x0017) +#define U300_SYSCON_SBCER_SPI_CLK_EN (0x0016) +#define U300_SYSCON_SBCER_MMC_CLK_EN (0x0015) +#define U300_SYSCON_SBCER_I2S1_CLK_EN (0x0014) +#define U300_SYSCON_SBCER_I2S0_CLK_EN (0x0013) +#define U300_SYSCON_SBCER_I2C1_CLK_EN (0x0012) +#define U300_SYSCON_SBCER_I2C0_CLK_EN (0x0011) +#define U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN (0x0010) +#define U300_SYSCON_SBCER_CDS_CLK_EN (0x002D) +#define U300_SYSCON_SBCER_ISP_CLK_EN (0x002C) +#define U300_SYSCON_SBCER_MSPRO_CLK_EN (0x002B) +#define U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN (0x002A) +#define U300_SYSCON_SBCER_SEMI_CLK_EN (0x0029) +#define U300_SYSCON_SBCER_XGAM_CLK_EN (0x0028) +#define U300_SYSCON_SBCER_VIDEO_ENC_CLK_EN (0x0027) +#define U300_SYSCON_SBCER_NANDIF_CLK_EN (0x0026) +#define U300_SYSCON_SBCER_EMIF_CLK_EN (0x0025) +#define U300_SYSCON_SBCER_DMAC_CLK_EN (0x0024) +#define U300_SYSCON_SBCER_CPU_CLK_EN (0x0023) +#define U300_SYSCON_SBCER_APEX_CLK_EN (0x0022) +#define U300_SYSCON_SBCER_AHB_CLK_EN (0x0021) +#define U300_SYSCON_SBCER_AAIF_CLK_EN (0x0020) +/* Single block clock disable 16bit (-/W) */ +#define U300_SYSCON_SBCDR (0x0030) +/* Same values as above for SBCER */ +/* Clock force SLOW peripherals 16bit (R/W) */ +#define U300_SYSCON_CFSR (0x003c) +#define U300_SYSCON_CFSR_PPM_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFSR_ACC_TMR_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFSR_APP_TMR_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFSR_KEYPAD_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFSR_GPIO_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFSR_EH_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFSR_BTR_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFSR_UART_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFSR_SLOW_BRIDGE_CLK_FORCE_EN (0x0001) +/* Clock force FAST peripherals 16bit (R/W) */ +#define U300_SYSCON_CFFR (0x40) +/* Values not defined. Define if you want to use them. */ +/* Clock force the rest of the peripherals 16bit (R/W) */ +#define U300_SYSCON_CFRR (0x44) +#define U300_SYSCON_CFRR_CDS_CLK_FORCE_EN (0x2000) +#define U300_SYSCON_CFRR_ISP_CLK_FORCE_EN (0x1000) +#define U300_SYSCON_CFRR_MSPRO_CLK_FORCE_EN (0x0800) +#define U300_SYSCON_CFRR_AHB_SUBSYS_BRIDGE_CLK_FORCE_EN (0x0400) +#define U300_SYSCON_CFRR_SEMI_CLK_FORCE_EN (0x0200) +#define U300_SYSCON_CFRR_XGAM_CLK_FORCE_EN (0x0100) +#define U300_SYSCON_CFRR_VIDEO_ENC_CLK_FORCE_EN (0x0080) +#define U300_SYSCON_CFRR_NANDIF_CLK_FORCE_EN (0x0040) +#define U300_SYSCON_CFRR_EMIF_CLK_FORCE_EN (0x0020) +#define U300_SYSCON_CFRR_DMAC_CLK_FORCE_EN (0x0010) +#define U300_SYSCON_CFRR_CPU_CLK_FORCE_EN (0x0008) +#define U300_SYSCON_CFRR_APEX_CLK_FORCE_EN (0x0004) +#define U300_SYSCON_CFRR_AHB_CLK_FORCE_EN (0x0002) +#define U300_SYSCON_CFRR_AAIF_CLK_FORCE_EN (0x0001) +/* PLL208 Frequency Control 16bit (R/W) */ +#define U300_SYSCON_PFCR (0x48) +#define U300_SYSCON_PFCR_DPLL_MULT_NUM (0x000F) +/* Power Management Control 16bit (R/W) */ +#define U300_SYSCON_PMCR (0x50) +#define U300_SYSCON_PMCR_DCON_ENABLE (0x0002) +#define U300_SYSCON_PMCR_PWR_MGNT_ENABLE (0x0001) +/* Reset Out 16bit (R/W) */ +#define U300_SYSCON_RCR (0x6c) +#define U300_SYSCON_RCR_RESOUT0_RST_N_DISABLE (0x0001) +/* EMIF Slew Rate Control 16bit (R/W) */ +#define U300_SYSCON_SRCLR (0x70) +#define U300_SYSCON_SRCLR_MASK (0x03FF) +#define U300_SYSCON_SRCLR_VALUE (0x03FF) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_B (0x0200) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_5_A (0x0100) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_B (0x0080) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_4_A (0x0040) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_B (0x0020) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_3_A (0x0010) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_B (0x0008) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_2_A (0x0004) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_B (0x0002) +#define U300_SYSCON_SRCLR_EMIF_1_SLRC_1_A (0x0001) +/* EMIF Clock Control Register 16bit (R/W) */ +#define U300_SYSCON_ECCR (0x0078) +#define U300_SYSCON_ECCR_MASK (0x000F) +#define U300_SYSCON_ECCR_EMIF_1_STATIC_CLK_EN_N_DISABLE (0x0008) +#define U300_SYSCON_ECCR_EMIF_1_RET_OUT_CLK_EN_N_DISABLE (0x0004) +#define U300_SYSCON_ECCR_EMIF_MEMCLK_RET_EN_N_DISABLE (0x0002) +#define U300_SYSCON_ECCR_EMIF_SDRCLK_RET_EN_N_DISABLE (0x0001) +/* MMC/MSPRO frequency divider register 0 16bit (R/W) */ +#define U300_SYSCON_MMF0R (0x90) +#define U300_SYSCON_MMF0R_MASK (0x00FF) +#define U300_SYSCON_MMF0R_FREQ_0_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF0R_FREQ_0_LOW_MASK (0x000F) +/* MMC/MSPRO frequency divider register 1 16bit (R/W) */ +#define U300_SYSCON_MMF1R (0x94) +#define U300_SYSCON_MMF1R_MASK (0x00FF) +#define U300_SYSCON_MMF1R_FREQ_1_HIGH_MASK (0x00F0) +#define U300_SYSCON_MMF1R_FREQ_1_LOW_MASK (0x000F) +/* Clock control for the MMC and MSPRO blocks 16bit (R/W) */ +#define U300_SYSCON_MMCR (0x9C) +#define U300_SYSCON_MMCR_MASK (0x0003) +#define U300_SYSCON_MMCR_MMC_FB_CLK_SEL_ENABLE (0x0002) +#define U300_SYSCON_MMCR_MSPRO_FREQSEL_ENABLE (0x0001) +/* SYS_0_CLK_CONTROL first clock control 16bit (R/W) */ +#define U300_SYSCON_S0CCR (0x120) +#define U300_SYSCON_S0CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S0CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S0CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S0CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S0CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S0CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S0CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S0CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S0CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S0CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S0CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S0CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S0CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_1_CLK_CONTROL second clock control 16 bit (R/W) */ +#define U300_SYSCON_S1CCR (0x124) +#define U300_SYSCON_S1CCR_FIELD_MASK (0x43FF) +#define U300_SYSCON_S1CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S1CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S1CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S1CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S1CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S1CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S1CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S1CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S1CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S1CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S1CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S1CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SYS_2_CLK_CONTROL third clock contol 16 bit (R/W) */ +#define U300_SYSCON_S2CCR (0x128) +#define U300_SYSCON_S2CCR_FIELD_MASK (0xC3FF) +#define U300_SYSCON_S2CCR_CLK_STEAL (0x8000) +#define U300_SYSCON_S2CCR_CLOCK_REQ (0x4000) +#define U300_SYSCON_S2CCR_CLOCK_REQ_MONITOR (0x2000) +#define U300_SYSCON_S2CCR_CLOCK_INV (0x0200) +#define U300_SYSCON_S2CCR_CLOCK_FREQ_MASK (0x01E0) +#define U300_SYSCON_S2CCR_CLOCK_SELECT_MASK (0x001E) +#define U300_SYSCON_S2CCR_CLOCK_ENABLE (0x0001) +#define U300_SYSCON_S2CCR_SEL_MCLK (0x8<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_FSM_CLK (0xA<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_48_CLK (0xC<<1) +#define U300_SYSCON_S2CCR_SEL_PLL60_60_CLK (0xD<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL208_CLK (0xE<<1) +#define U300_SYSCON_S2CCR_SEL_ACC_PLL13_CLK (0x0<<1) +#define U300_SYSCON_S2CCR_SEL_APP_FSM_CLK (0x2<<1) +#define U300_SYSCON_S2CCR_SEL_RTC_CLK (0x4<<1) +#define U300_SYSCON_S2CCR_SEL_APP_PLL208_CLK (0x6<<1) +/* SC_PLL_IRQ_CONTROL 16bit (R/W) */ +#define U300_SYSCON_PICR (0x0130) +#define U300_SYSCON_PICR_MASK (0x00FF) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_LOW_ENABLE (0x0080) +#define U300_SYSCON_PICR_FORCE_PLL208_LOCK_HIGH_ENABLE (0x0040) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_LOW_ENABLE (0x0020) +#define U300_SYSCON_PICR_FORCE_PLL13_LOCK_HIGH_ENABLE (0x0010) +#define U300_SYSCON_PICR_IRQMASK_PLL13_UNLOCK_ENABLE (0x0008) +#define U300_SYSCON_PICR_IRQMASK_PLL13_LOCK_ENABLE (0x0004) +#define U300_SYSCON_PICR_IRQMASK_PLL208_UNLOCK_ENABLE (0x0002) +#define U300_SYSCON_PICR_IRQMASK_PLL208_LOCK_ENABLE (0x0001) +/* SC_PLL_IRQ_STATUS 16 bit (R/-) */ +#define U300_SYSCON_PISR (0x0134) +#define U300_SYSCON_PISR_MASK (0x000F) +#define U300_SYSCON_PISR_PLL13_UNLOCK_IND (0x0008) +#define U300_SYSCON_PISR_PLL13_LOCK_IND (0x0004) +#define U300_SYSCON_PISR_PLL208_UNLOCK_IND (0x0002) +#define U300_SYSCON_PISR_PLL208_LOCK_IND (0x0001) +/* SC_PLL_IRQ_CLEAR 16 bit (-/W) */ +#define U300_SYSCON_PICLR (0x0138) +#define U300_SYSCON_PICLR_MASK (0x000F) +#define U300_SYSCON_PICLR_RWMASK (0x0000) +#define U300_SYSCON_PICLR_PLL13_UNLOCK_SC (0x0008) +#define U300_SYSCON_PICLR_PLL13_LOCK_SC (0x0004) +#define U300_SYSCON_PICLR_PLL208_UNLOCK_SC (0x0002) +#define U300_SYSCON_PICLR_PLL208_LOCK_SC (0x0001) +/* Clock activity observability register 0 */ +#define U300_SYSCON_C0OAR (0x140) +#define U300_SYSCON_C0OAR_MASK (0xFFFF) +#define U300_SYSCON_C0OAR_VALUE (0xFFFF) +#define U300_SYSCON_C0OAR_BT_H_CLK (0x8000) +#define U300_SYSCON_C0OAR_ASPB_P_CLK (0x4000) +#define U300_SYSCON_C0OAR_APP_SEMI_H_CLK (0x2000) +#define U300_SYSCON_C0OAR_APP_SEMI_CLK (0x1000) +#define U300_SYSCON_C0OAR_APP_MMC_MSPRO_CLK (0x0800) +#define U300_SYSCON_C0OAR_APP_I2S1_CLK (0x0400) +#define U300_SYSCON_C0OAR_APP_I2S0_CLK (0x0200) +#define U300_SYSCON_C0OAR_APP_CPU_CLK (0x0100) +#define U300_SYSCON_C0OAR_APP_52_CLK (0x0080) +#define U300_SYSCON_C0OAR_APP_208_CLK (0x0040) +#define U300_SYSCON_C0OAR_APP_104_CLK (0x0020) +#define U300_SYSCON_C0OAR_APEX_CLK (0x0010) +#define U300_SYSCON_C0OAR_AHPB_M_H_CLK (0x0008) +#define U300_SYSCON_C0OAR_AHB_CLK (0x0004) +#define U300_SYSCON_C0OAR_AFPB_P_CLK (0x0002) +#define U300_SYSCON_C0OAR_AAIF_CLK (0x0001) +/* Clock activity observability register 1 */ +#define U300_SYSCON_C1OAR (0x144) +#define U300_SYSCON_C1OAR_MASK (0x3FFE) +#define U300_SYSCON_C1OAR_VALUE (0x3FFE) +#define U300_SYSCON_C1OAR_NFIF_F_CLK (0x2000) +#define U300_SYSCON_C1OAR_MSPRO_CLK (0x1000) +#define U300_SYSCON_C1OAR_MMC_P_CLK (0x0800) +#define U300_SYSCON_C1OAR_MMC_CLK (0x0400) +#define U300_SYSCON_C1OAR_KP_P_CLK (0x0200) +#define U300_SYSCON_C1OAR_I2C1_P_CLK (0x0100) +#define U300_SYSCON_C1OAR_I2C0_P_CLK (0x0080) +#define U300_SYSCON_C1OAR_GPIO_CLK (0x0040) +#define U300_SYSCON_C1OAR_EMIF_MPMC_CLK (0x0020) +#define U300_SYSCON_C1OAR_EMIF_H_CLK (0x0010) +#define U300_SYSCON_C1OAR_EVHIST_CLK (0x0008) +#define U300_SYSCON_C1OAR_PPM_CLK (0x0004) +#define U300_SYSCON_C1OAR_DMA_CLK (0x0002) +/* Clock activity observability register 2 */ +#define U300_SYSCON_C2OAR (0x148) +#define U300_SYSCON_C2OAR_MASK (0x0FFF) +#define U300_SYSCON_C2OAR_VALUE (0x0FFF) +#define U300_SYSCON_C2OAR_XGAM_CDI_CLK (0x0800) +#define U300_SYSCON_C2OAR_XGAM_CLK (0x0400) +#define U300_SYSCON_C2OAR_VC_H_CLK (0x0200) +#define U300_SYSCON_C2OAR_VC_CLK (0x0100) +#define U300_SYSCON_C2OAR_UA_P_CLK (0x0080) +#define U300_SYSCON_C2OAR_TMR1_CLK (0x0040) +#define U300_SYSCON_C2OAR_TMR0_CLK (0x0020) +#define U300_SYSCON_C2OAR_SPI_P_CLK (0x0010) +#define U300_SYSCON_C2OAR_PCM_I2S1_CORE_CLK (0x0008) +#define U300_SYSCON_C2OAR_PCM_I2S1_CLK (0x0004) +#define U300_SYSCON_C2OAR_PCM_I2S0_CORE_CLK (0x0002) +#define U300_SYSCON_C2OAR_PCM_I2S0_CLK (0x0001) + /* * The clocking hierarchy currently looks like this. @@ -386,6 +728,213 @@ syscon_clk_register(struct device *dev, const char *name, return clk; } +#define U300_CLK_TYPE_SLOW 0 +#define U300_CLK_TYPE_FAST 1 +#define U300_CLK_TYPE_REST 2 + +/** + * struct u300_clock - defines the bits and pieces for a certain clock + * @type: the clock type, slow fast or rest + * @id: the bit in the slow/fast/rest register for this clock + * @hw_ctrld: whether the clock is hardware controlled + * @clk_val: a value to poke in the one-write enable/disable registers + */ +struct u300_clock { + u8 type; + u8 id; + bool hw_ctrld; + u16 clk_val; +}; + +struct u300_clock const __initconst u300_clk_lookup[] = { + { + .type = U300_CLK_TYPE_REST, + .id = 3, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_CPU_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 4, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_DMAC_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 5, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_EMIF_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 6, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_NANDIF_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 8, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_XGAM_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 9, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_SEMI_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 10, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_REST, + .id = 12, + .hw_ctrld = false, + /* INTCON: cannot be enabled, just taken out of reset */ + .clk_val = 0xFFFFU, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 0, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 1, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_I2C0_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 2, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_I2C1_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 5, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_MMC_CLK_EN, + }, + { + .type = U300_CLK_TYPE_FAST, + .id = 6, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_SPI_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 0, + .hw_ctrld = true, + .clk_val = U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 1, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_UART_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 4, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_GPIO_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 6, + .hw_ctrld = true, + /* No clock enable register bit */ + .clk_val = 0xFFFFU, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 7, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_APP_TMR_CLK_EN, + }, + { + .type = U300_CLK_TYPE_SLOW, + .id = 8, + .hw_ctrld = false, + .clk_val = U300_SYSCON_SBCER_ACC_TMR_CLK_EN, + }, +}; + +static void __init of_u300_syscon_clk_init(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + void __iomem *res_reg; + void __iomem *en_reg; + u32 clk_type; + u32 clk_id; + int i; + + if (of_property_read_u32(np, "clock-type", &clk_type)) { + pr_err("%s: syscon clock \"%s\" missing clock-type property\n", + __func__, clk_name); + return; + } + if (of_property_read_u32(np, "clock-id", &clk_id)) { + pr_err("%s: syscon clock \"%s\" missing clock-id property\n", + __func__, clk_name); + return; + } + parent_name = of_clk_get_parent_name(np, 0); + + switch (clk_type) { + case U300_CLK_TYPE_SLOW: + res_reg = syscon_vbase + U300_SYSCON_RSR; + en_reg = syscon_vbase + U300_SYSCON_CESR; + break; + case U300_CLK_TYPE_FAST: + res_reg = syscon_vbase + U300_SYSCON_RFR; + en_reg = syscon_vbase + U300_SYSCON_CEFR; + break; + case U300_CLK_TYPE_REST: + res_reg = syscon_vbase + U300_SYSCON_RRR; + en_reg = syscon_vbase + U300_SYSCON_CERR; + break; + default: + pr_err("unknown clock type %x specified\n", clk_type); + return; + } + + for (i = 0; i < ARRAY_SIZE(u300_clk_lookup); i++) { + const struct u300_clock *u3clk = &u300_clk_lookup[i]; + + if (u3clk->type == clk_type && u3clk->id == clk_id) + clk = syscon_clk_register(NULL, + clk_name, parent_name, + 0, u3clk->hw_ctrld, + res_reg, u3clk->id, + en_reg, u3clk->id, + u3clk->clk_val); + } + + if (!IS_ERR(clk)) { + of_clk_add_provider(np, of_clk_src_simple_get, clk); + + /* + * Some few system clocks - device tree does not + * represent clocks without a corresponding device node. + * for now we add these three clocks here. + */ + if (clk_type == U300_CLK_TYPE_REST && clk_id == 5) + clk_register_clkdev(clk, NULL, "pl172"); + if (clk_type == U300_CLK_TYPE_REST && clk_id == 9) + clk_register_clkdev(clk, NULL, "semi"); + if (clk_type == U300_CLK_TYPE_REST && clk_id == 12) + clk_register_clkdev(clk, NULL, "intcon"); + } +} + /** * struct clk_mclk - U300 MCLK clock (MMC/SD clock) * @hw: corresponding clock hardware entry @@ -590,10 +1139,41 @@ mclk_clk_register(struct device *dev, const char *name, return clk; } +static void __init of_u300_syscon_mclk_init(struct device_node *np) +{ + struct clk *clk = ERR_PTR(-EINVAL); + const char *clk_name = np->name; + const char *parent_name; + + parent_name = of_clk_get_parent_name(np, 0); + clk = mclk_clk_register(NULL, clk_name, parent_name, false); + if (!IS_ERR(clk)) + of_clk_add_provider(np, of_clk_src_simple_get, clk); +} + +static const __initconst struct of_device_id u300_clk_match[] = { + { + .compatible = "fixed-clock", + .data = of_fixed_clk_setup, + }, + { + .compatible = "fixed-factor-clock", + .data = of_fixed_factor_clk_setup, + }, + { + .compatible = "stericsson,u300-syscon-clk", + .data = of_u300_syscon_clk_init, + }, + { + .compatible = "stericsson,u300-syscon-mclk", + .data = of_u300_syscon_mclk_init, + }, +}; + + void __init u300_clk_init(void __iomem *base) { u16 val; - struct clk *clk; syscon_vbase = base; @@ -610,137 +1190,5 @@ void __init u300_clk_init(void __iomem *base) val |= U300_SYSCON_PMCR_PWR_MGNT_ENABLE; writew(val, syscon_vbase + U300_SYSCON_PMCR); - /* These are always available (RTC and PLL13) */ - clk = clk_register_fixed_rate(NULL, "app_32_clk", NULL, - CLK_IS_ROOT, 32768); - /* The watchdog sits directly on the 32 kHz clock */ - clk_register_clkdev(clk, NULL, "coh901327_wdog"); - clk = clk_register_fixed_rate(NULL, "pll13", NULL, - CLK_IS_ROOT, 13000000); - - /* These derive from PLL208 */ - clk = clk_register_fixed_rate(NULL, "pll208", NULL, - CLK_IS_ROOT, 208000000); - clk = clk_register_fixed_factor(NULL, "app_208_clk", "pll208", - 0, 1, 1); - clk = clk_register_fixed_factor(NULL, "app_104_clk", "pll208", - 0, 1, 2); - clk = clk_register_fixed_factor(NULL, "app_52_clk", "pll208", - 0, 1, 4); - /* The 52 MHz is divided down to 26 MHz */ - clk = clk_register_fixed_factor(NULL, "app_26_clk", "app_52_clk", - 0, 1, 2); - - /* Directly on the AMBA interconnect */ - clk = syscon_clk_register(NULL, "cpu_clk", "app_208_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 3, - syscon_vbase + U300_SYSCON_CERR, 3, - U300_SYSCON_SBCER_CPU_CLK_EN); - clk = syscon_clk_register(NULL, "dmac_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 4, - syscon_vbase + U300_SYSCON_CERR, 4, - U300_SYSCON_SBCER_DMAC_CLK_EN); - clk_register_clkdev(clk, NULL, "dma"); - clk = syscon_clk_register(NULL, "fsmc_clk", "app_52_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 6, - syscon_vbase + U300_SYSCON_CERR, 6, - U300_SYSCON_SBCER_NANDIF_CLK_EN); - clk_register_clkdev(clk, NULL, "fsmc-nand"); - clk = syscon_clk_register(NULL, "xgam_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 8, - syscon_vbase + U300_SYSCON_CERR, 8, - U300_SYSCON_SBCER_XGAM_CLK_EN); - clk_register_clkdev(clk, NULL, "xgam"); - clk = syscon_clk_register(NULL, "semi_clk", "app_104_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 9, - syscon_vbase + U300_SYSCON_CERR, 9, - U300_SYSCON_SBCER_SEMI_CLK_EN); - clk_register_clkdev(clk, NULL, "semi"); - - /* AHB bridge clocks */ - clk = syscon_clk_register(NULL, "ahb_subsys_clk", "app_52_clk", 0, true, - syscon_vbase + U300_SYSCON_RRR, 10, - syscon_vbase + U300_SYSCON_CERR, 10, - U300_SYSCON_SBCER_AHB_SUBSYS_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "intcon_clk", "ahb_subsys_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 12, - syscon_vbase + U300_SYSCON_CERR, 12, - /* Cannot be enabled, just taken out of reset */ - 0xFFFFU); - clk_register_clkdev(clk, NULL, "intcon"); - clk = syscon_clk_register(NULL, "emif_clk", "ahb_subsys_clk", 0, false, - syscon_vbase + U300_SYSCON_RRR, 5, - syscon_vbase + U300_SYSCON_CERR, 5, - U300_SYSCON_SBCER_EMIF_CLK_EN); - clk_register_clkdev(clk, NULL, "pl172"); - - /* FAST bridge clocks */ - clk = syscon_clk_register(NULL, "fast_clk", "app_26_clk", 0, true, - syscon_vbase + U300_SYSCON_RFR, 0, - syscon_vbase + U300_SYSCON_CEFR, 0, - U300_SYSCON_SBCER_FAST_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "i2c0_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 1, - syscon_vbase + U300_SYSCON_CEFR, 1, - U300_SYSCON_SBCER_I2C0_CLK_EN); - clk_register_clkdev(clk, NULL, "stu300.0"); - clk = syscon_clk_register(NULL, "i2c1_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 2, - syscon_vbase + U300_SYSCON_CEFR, 2, - U300_SYSCON_SBCER_I2C1_CLK_EN); - clk_register_clkdev(clk, NULL, "stu300.1"); - clk = syscon_clk_register(NULL, "mmc_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 5, - syscon_vbase + U300_SYSCON_CEFR, 5, - U300_SYSCON_SBCER_MMC_CLK_EN); - clk_register_clkdev(clk, "apb_pclk", "mmci"); - clk = syscon_clk_register(NULL, "spi_p_clk", "fast_clk", 0, false, - syscon_vbase + U300_SYSCON_RFR, 6, - syscon_vbase + U300_SYSCON_CEFR, 6, - U300_SYSCON_SBCER_SPI_CLK_EN); - /* The SPI has no external clock for the outward bus, uses the pclk */ - clk_register_clkdev(clk, NULL, "pl022"); - clk_register_clkdev(clk, "apb_pclk", "pl022"); - - /* SLOW bridge clocks */ - clk = syscon_clk_register(NULL, "slow_clk", "pll13", 0, true, - syscon_vbase + U300_SYSCON_RSR, 0, - syscon_vbase + U300_SYSCON_CESR, 0, - U300_SYSCON_SBCER_SLOW_BRIDGE_CLK_EN); - clk = syscon_clk_register(NULL, "uart0_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 1, - syscon_vbase + U300_SYSCON_CESR, 1, - U300_SYSCON_SBCER_UART_CLK_EN); - /* Same clock is used for APB and outward bus */ - clk_register_clkdev(clk, NULL, "uart0"); - clk_register_clkdev(clk, "apb_pclk", "uart0"); - clk = syscon_clk_register(NULL, "gpio_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 4, - syscon_vbase + U300_SYSCON_CESR, 4, - U300_SYSCON_SBCER_GPIO_CLK_EN); - clk_register_clkdev(clk, NULL, "u300-gpio"); - clk = syscon_clk_register(NULL, "keypad_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 5, - syscon_vbase + U300_SYSCON_CESR, 6, - U300_SYSCON_SBCER_KEYPAD_CLK_EN); - clk_register_clkdev(clk, NULL, "coh901461-keypad"); - clk = syscon_clk_register(NULL, "rtc_clk", "slow_clk", 0, true, - syscon_vbase + U300_SYSCON_RSR, 6, - /* No clock enable register bit */ - NULL, 0, 0xFFFFU); - clk_register_clkdev(clk, NULL, "rtc-coh901331"); - clk = syscon_clk_register(NULL, "app_tmr_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 7, - syscon_vbase + U300_SYSCON_CESR, 7, - U300_SYSCON_SBCER_APP_TMR_CLK_EN); - clk_register_clkdev(clk, NULL, "apptimer"); - clk = syscon_clk_register(NULL, "acc_tmr_clk", "slow_clk", 0, false, - syscon_vbase + U300_SYSCON_RSR, 8, - syscon_vbase + U300_SYSCON_CESR, 8, - U300_SYSCON_SBCER_ACC_TMR_CLK_EN); - clk_register_clkdev(clk, NULL, "timer"); - - /* Then this special MMC/SD clock */ - clk = mclk_clk_register(NULL, "mmc_clk", "mmc_p_clk", false); - clk_register_clkdev(clk, NULL, "mmci"); + of_clk_init(u300_clk_match); } diff --git a/drivers/clk/clk-zynq.c b/drivers/clk/clk-zynq.c deleted file mode 100644 index 3206297..0000000 --- a/drivers/clk/clk-zynq.c +++ /dev/null @@ -1,378 +0,0 @@ -/* - * Copyright (c) 2012 National Instruments - * - * Josh Cartwright <josh.cartwright@ni.com> - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see <http://www.gnu.org/licenses/>. - */ -#include <linux/io.h> -#include <linux/of.h> -#include <linux/slab.h> -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/clk/zynq.h> - -static void __iomem *slcr_base; - -struct zynq_pll_clk { - struct clk_hw hw; - void __iomem *pll_ctrl; - void __iomem *pll_cfg; -}; - -#define to_zynq_pll_clk(hw) container_of(hw, struct zynq_pll_clk, hw) - -#define CTRL_PLL_FDIV(x) ((x) >> 12) - -static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_pll_clk *pll = to_zynq_pll_clk(hw); - return parent_rate * CTRL_PLL_FDIV(ioread32(pll->pll_ctrl)); -} - -static const struct clk_ops zynq_pll_clk_ops = { - .recalc_rate = zynq_pll_recalc_rate, -}; - -static void __init zynq_pll_clk_setup(struct device_node *np) -{ - struct clk_init_data init; - struct zynq_pll_clk *pll; - const char *parent_name; - struct clk *clk; - u32 regs[2]; - int ret; - - ret = of_property_read_u32_array(np, "reg", regs, ARRAY_SIZE(regs)); - if (WARN_ON(ret)) - return; - - pll = kzalloc(sizeof(*pll), GFP_KERNEL); - if (WARN_ON(!pll)) - return; - - pll->pll_ctrl = slcr_base + regs[0]; - pll->pll_cfg = slcr_base + regs[1]; - - of_property_read_string(np, "clock-output-names", &init.name); - - init.ops = &zynq_pll_clk_ops; - parent_name = of_clk_get_parent_name(np, 0); - init.parent_names = &parent_name; - init.num_parents = 1; - - pll->hw.init = &init; - - clk = clk_register(NULL, &pll->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - ret = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(ret)) - return; -} -CLK_OF_DECLARE(zynq_pll, "xlnx,zynq-pll", zynq_pll_clk_setup); - -struct zynq_periph_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *gates[2]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_periph_clk(hw) container_of(hw, struct zynq_periph_clk, hw) - -static const u8 periph_clk_parent_map[] = { - 0, 0, 1, 2 -}; -#define PERIPH_CLK_CTRL_SRC(x) (periph_clk_parent_map[((x) & 0x30) >> 4]) -#define PERIPH_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static unsigned long zynq_periph_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return parent_rate / PERIPH_CLK_CTRL_DIV(ioread32(periph->clk_ctrl)); -} - -static u8 zynq_periph_get_parent(struct clk_hw *hw) -{ - struct zynq_periph_clk *periph = to_zynq_periph_clk(hw); - return PERIPH_CLK_CTRL_SRC(ioread32(periph->clk_ctrl)); -} - -static const struct clk_ops zynq_periph_clk_ops = { - .recalc_rate = zynq_periph_recalc_rate, - .get_parent = zynq_periph_get_parent, -}; - -static void __init zynq_periph_clk_setup(struct device_node *np) -{ - struct zynq_periph_clk *periph; - const char *parent_names[3]; - struct clk_init_data init; - int clk_num = 0, err; - const char *name; - struct clk *clk; - u32 reg; - int i; - - err = of_property_read_u32(np, "reg", ®); - if (WARN_ON(err)) - return; - - periph = kzalloc(sizeof(*periph), GFP_KERNEL); - if (WARN_ON(!periph)) - return; - - periph->clk_ctrl = slcr_base + reg; - spin_lock_init(&periph->clkact_lock); - - init.name = np->name; - init.ops = &zynq_periph_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - periph->hw.init = &init; - - clk = clk_register(NULL, &periph->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - err = of_property_read_string_index(np, "clock-output-names", 0, - &name); - if (WARN_ON(err)) - return; - - periph->gates[0] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 0, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[0]))) - return; - clk_num++; - - /* some periph clks have 2 downstream gates */ - err = of_property_read_string_index(np, "clock-output-names", 1, - &name); - if (err != -ENODATA) { - periph->gates[1] = clk_register_gate(NULL, name, np->name, 0, - periph->clk_ctrl, 1, 0, - &periph->clkact_lock); - if (WARN_ON(IS_ERR(periph->gates[1]))) - return; - clk_num++; - } - - periph->onecell_data.clks = periph->gates; - periph->onecell_data.clk_num = clk_num; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &periph->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_periph, "xlnx,zynq-periph-clock", zynq_periph_clk_setup); - -/* CPU Clock domain is modelled as a mux with 4 children subclks, whose - * derivative rates depend on CLK_621_TRUE - */ - -struct zynq_cpu_clk { - struct clk_hw hw; - struct clk_onecell_data onecell_data; - struct clk *subclks[4]; - void __iomem *clk_ctrl; - spinlock_t clkact_lock; -}; - -#define to_zynq_cpu_clk(hw) container_of(hw, struct zynq_cpu_clk, hw) - -static const u8 zynq_cpu_clk_parent_map[] = { - 1, 1, 2, 0 -}; -#define CPU_CLK_SRCSEL(x) (zynq_cpu_clk_parent_map[(((x) & 0x30) >> 4)]) -#define CPU_CLK_CTRL_DIV(x) (((x) & 0x3F00) >> 8) - -static u8 zynq_cpu_clk_get_parent(struct clk_hw *hw) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return CPU_CLK_SRCSEL(ioread32(cpuclk->clk_ctrl)); -} - -static unsigned long zynq_cpu_clk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - struct zynq_cpu_clk *cpuclk = to_zynq_cpu_clk(hw); - return parent_rate / CPU_CLK_CTRL_DIV(ioread32(cpuclk->clk_ctrl)); -} - -static const struct clk_ops zynq_cpu_clk_ops = { - .get_parent = zynq_cpu_clk_get_parent, - .recalc_rate = zynq_cpu_clk_recalc_rate, -}; - -struct zynq_cpu_subclk { - struct clk_hw hw; - void __iomem *clk_621; - enum { - CPU_SUBCLK_6X4X, - CPU_SUBCLK_3X2X, - CPU_SUBCLK_2X, - CPU_SUBCLK_1X, - } which; -}; - -#define CLK_621_TRUE(x) ((x) & 1) - -#define to_zynq_cpu_subclk(hw) container_of(hw, struct zynq_cpu_subclk, hw); - -static unsigned long zynq_cpu_subclk_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) -{ - unsigned long uninitialized_var(rate); - struct zynq_cpu_subclk *subclk; - bool is_621; - - subclk = to_zynq_cpu_subclk(hw) - is_621 = CLK_621_TRUE(ioread32(subclk->clk_621)); - - switch (subclk->which) { - case CPU_SUBCLK_6X4X: - rate = parent_rate; - break; - case CPU_SUBCLK_3X2X: - rate = parent_rate / 2; - break; - case CPU_SUBCLK_2X: - rate = parent_rate / (is_621 ? 3 : 2); - break; - case CPU_SUBCLK_1X: - rate = parent_rate / (is_621 ? 6 : 4); - break; - }; - - return rate; -} - -static const struct clk_ops zynq_cpu_subclk_ops = { - .recalc_rate = zynq_cpu_subclk_recalc_rate, -}; - -static struct clk *zynq_cpu_subclk_setup(struct device_node *np, u8 which, - void __iomem *clk_621) -{ - struct zynq_cpu_subclk *subclk; - struct clk_init_data init; - struct clk *clk; - int err; - - err = of_property_read_string_index(np, "clock-output-names", - which, &init.name); - if (WARN_ON(err)) - goto err_read_output_name; - - subclk = kzalloc(sizeof(*subclk), GFP_KERNEL); - if (!subclk) - goto err_subclk_alloc; - - subclk->clk_621 = clk_621; - subclk->which = which; - - init.ops = &zynq_cpu_subclk_ops; - init.parent_names = &np->name; - init.num_parents = 1; - - subclk->hw.init = &init; - - clk = clk_register(NULL, &subclk->hw); - if (WARN_ON(IS_ERR(clk))) - goto err_clk_register; - - return clk; - -err_clk_register: - kfree(subclk); -err_subclk_alloc: -err_read_output_name: - return ERR_PTR(-EINVAL); -} - -static void __init zynq_cpu_clk_setup(struct device_node *np) -{ - struct zynq_cpu_clk *cpuclk; - const char *parent_names[3]; - struct clk_init_data init; - void __iomem *clk_621; - struct clk *clk; - u32 reg[2]; - int err; - int i; - - err = of_property_read_u32_array(np, "reg", reg, ARRAY_SIZE(reg)); - if (WARN_ON(err)) - return; - - cpuclk = kzalloc(sizeof(*cpuclk), GFP_KERNEL); - if (WARN_ON(!cpuclk)) - return; - - cpuclk->clk_ctrl = slcr_base + reg[0]; - clk_621 = slcr_base + reg[1]; - spin_lock_init(&cpuclk->clkact_lock); - - init.name = np->name; - init.ops = &zynq_cpu_clk_ops; - for (i = 0; i < ARRAY_SIZE(parent_names); i++) - parent_names[i] = of_clk_get_parent_name(np, i); - init.parent_names = parent_names; - init.num_parents = ARRAY_SIZE(parent_names); - - cpuclk->hw.init = &init; - - clk = clk_register(NULL, &cpuclk->hw); - if (WARN_ON(IS_ERR(clk))) - return; - - err = of_clk_add_provider(np, of_clk_src_simple_get, clk); - if (WARN_ON(err)) - return; - - for (i = 0; i < 4; i++) { - cpuclk->subclks[i] = zynq_cpu_subclk_setup(np, i, clk_621); - if (WARN_ON(IS_ERR(cpuclk->subclks[i]))) - return; - } - - cpuclk->onecell_data.clks = cpuclk->subclks; - cpuclk->onecell_data.clk_num = i; - - err = of_clk_add_provider(np, of_clk_src_onecell_get, - &cpuclk->onecell_data); - if (WARN_ON(err)) - return; -} -CLK_OF_DECLARE(zynq_cpu, "xlnx,zynq-cpu-clock", zynq_cpu_clk_setup); - -void __init xilinx_zynq_clocks_init(void __iomem *slcr) -{ - slcr_base = slcr; - of_clk_init(NULL); -} diff --git a/drivers/clk/mvebu/Kconfig b/drivers/clk/mvebu/Kconfig index 57323fd..0b0f3e7 100644 --- a/drivers/clk/mvebu/Kconfig +++ b/drivers/clk/mvebu/Kconfig @@ -1,8 +1,23 @@ -config MVEBU_CLK_CORE - bool +config MVEBU_CLK_COMMON + bool config MVEBU_CLK_CPU - bool + bool -config MVEBU_CLK_GATING - bool +config ARMADA_370_CLK + bool + select MVEBU_CLK_COMMON + select MVEBU_CLK_CPU + +config ARMADA_XP_CLK + bool + select MVEBU_CLK_COMMON + select MVEBU_CLK_CPU + +config DOVE_CLK + bool + select MVEBU_CLK_COMMON + +config KIRKWOOD_CLK + bool + select MVEBU_CLK_COMMON diff --git a/drivers/clk/mvebu/Makefile b/drivers/clk/mvebu/Makefile index 58df3dc..1c7e70c 100644 --- a/drivers/clk/mvebu/Makefile +++ b/drivers/clk/mvebu/Makefile @@ -1,3 +1,7 @@ -obj-$(CONFIG_MVEBU_CLK_CORE) += clk.o clk-core.o +obj-$(CONFIG_MVEBU_CLK_COMMON) += common.o obj-$(CONFIG_MVEBU_CLK_CPU) += clk-cpu.o -obj-$(CONFIG_MVEBU_CLK_GATING) += clk-gating-ctrl.o + +obj-$(CONFIG_ARMADA_370_CLK) += armada-370.o +obj-$(CONFIG_ARMADA_XP_CLK) += armada-xp.o +obj-$(CONFIG_DOVE_CLK) += dove.o +obj-$(CONFIG_KIRKWOOD_CLK) += kirkwood.o diff --git a/drivers/clk/mvebu/armada-370.c b/drivers/clk/mvebu/armada-370.c new file mode 100644 index 0000000..079960e --- /dev/null +++ b/drivers/clk/mvebu/armada-370.c @@ -0,0 +1,176 @@ +/* + * Marvell Armada 370 SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_A370_PCLK_FREQ_OPT 11 +#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF +#define SARL_A370_FAB_FREQ_OPT 15 +#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F +#define SARL_A370_TCLK_FREQ_OPT 20 +#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 + +enum { A370_CPU_TO_NBCLK, A370_CPU_TO_HCLK, A370_CPU_TO_DRAMCLK }; + +static const struct coreclk_ratio __initconst a370_coreclk_ratios[] = { + { .id = A370_CPU_TO_NBCLK, .name = "nbclk" }, + { .id = A370_CPU_TO_HCLK, .name = "hclk" }, + { .id = A370_CPU_TO_DRAMCLK, .name = "dramclk" }, +}; + +static const u32 __initconst a370_tclk_freqs[] = { + 16600000, + 20000000, +}; + +static u32 __init a370_get_tclk_freq(void __iomem *sar) +{ + u8 tclk_freq_select = 0; + + tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & + SARL_A370_TCLK_FREQ_OPT_MASK); + return a370_tclk_freqs[tclk_freq_select]; +} + +static const u32 __initconst a370_cpu_freqs[] = { + 400000000, + 533000000, + 667000000, + 800000000, + 1000000000, + 1067000000, + 1200000000, +}; + +static u32 __init a370_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & + SARL_A370_PCLK_FREQ_OPT_MASK); + if (cpu_freq_select >= ARRAY_SIZE(a370_cpu_freqs)) { + pr_err("CPU freq select unsupported %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = a370_cpu_freqs[cpu_freq_select]; + + return cpu_freq; +} + +static const int __initconst a370_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst a370_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init a370_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & + SARL_A370_FAB_FREQ_OPT_MASK); + + switch (id) { + case A370_CPU_TO_NBCLK: + *mult = a370_nbclk_ratios[opt][0]; + *div = a370_nbclk_ratios[opt][1]; + break; + case A370_CPU_TO_HCLK: + *mult = a370_hclk_ratios[opt][0]; + *div = a370_hclk_ratios[opt][1]; + break; + case A370_CPU_TO_DRAMCLK: + *mult = a370_dramclk_ratios[opt][0]; + *div = a370_dramclk_ratios[opt][1]; + break; + } +} + +static const struct coreclk_soc_desc a370_coreclks = { + .get_tclk_freq = a370_get_tclk_freq, + .get_cpu_freq = a370_get_cpu_freq, + .get_clk_ratio = a370_get_clk_ratio, + .ratios = a370_coreclk_ratios, + .num_ratios = ARRAY_SIZE(a370_coreclk_ratios), +}; + +static void __init a370_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &a370_coreclks); +} +CLK_OF_DECLARE(a370_core_clk, "marvell,armada-370-core-clock", + a370_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst a370_gating_desc[] = { + { "audio", NULL, 0, 0 }, + { "pex0_en", NULL, 1, 0 }, + { "pex1_en", NULL, 2, 0 }, + { "ge1", NULL, 3, 0 }, + { "ge0", NULL, 4, 0 }, + { "pex0", "pex0_en", 5, 0 }, + { "pex1", "pex1_en", 9, 0 }, + { "sata0", NULL, 15, 0 }, + { "sdio", NULL, 17, 0 }, + { "tdm", NULL, 25, 0 }, + { "ddr", NULL, 28, CLK_IGNORE_UNUSED }, + { "sata1", NULL, 30, 0 }, + { } +}; + +static void __init a370_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, a370_gating_desc); +} +CLK_OF_DECLARE(a370_clk_gating, "marvell,armada-370-gating-clock", + a370_clk_gating_init); diff --git a/drivers/clk/mvebu/armada-xp.c b/drivers/clk/mvebu/armada-xp.c new file mode 100644 index 0000000..13b62ce --- /dev/null +++ b/drivers/clk/mvebu/armada-xp.c @@ -0,0 +1,210 @@ +/* + * Marvell Armada XP SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + * + * Armada XP Sample At Reset is a 64 bit bitfiled split in two + * register of 32 bits + */ + +#define SARL 0 /* Low part [0:31] */ +#define SARL_AXP_PCLK_FREQ_OPT 21 +#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 +#define SARL_AXP_FAB_FREQ_OPT 24 +#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF +#define SARH 4 /* High part [32:63] */ +#define SARH_AXP_PCLK_FREQ_OPT (52-32) +#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 +#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 +#define SARH_AXP_FAB_FREQ_OPT (51-32) +#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 +#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 + +enum { AXP_CPU_TO_NBCLK, AXP_CPU_TO_HCLK, AXP_CPU_TO_DRAMCLK }; + +static const struct coreclk_ratio __initconst axp_coreclk_ratios[] = { + { .id = AXP_CPU_TO_NBCLK, .name = "nbclk" }, + { .id = AXP_CPU_TO_HCLK, .name = "hclk" }, + { .id = AXP_CPU_TO_DRAMCLK, .name = "dramclk" }, +}; + +/* Armada XP TCLK frequency is fixed to 250MHz */ +static u32 __init axp_get_tclk_freq(void __iomem *sar) +{ + return 250000000; +} + +static const u32 __initconst axp_cpu_freqs[] = { + 1000000000, + 1066000000, + 1200000000, + 1333000000, + 1500000000, + 1666000000, + 1800000000, + 2000000000, + 667000000, + 0, + 800000000, + 1600000000, +}; + +static u32 __init axp_get_cpu_freq(void __iomem *sar) +{ + u32 cpu_freq; + u8 cpu_freq_select = 0; + + cpu_freq_select = ((readl(sar + SARL) >> SARL_AXP_PCLK_FREQ_OPT) & + SARL_AXP_PCLK_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + cpu_freq_select |= (((readl(sar + SARH) >> SARH_AXP_PCLK_FREQ_OPT) & + SARH_AXP_PCLK_FREQ_OPT_MASK) << SARH_AXP_PCLK_FREQ_OPT_SHIFT); + if (cpu_freq_select >= ARRAY_SIZE(axp_cpu_freqs)) { + pr_err("CPU freq select unsupported: %d\n", cpu_freq_select); + cpu_freq = 0; + } else + cpu_freq = axp_cpu_freqs[cpu_freq_select]; + + return cpu_freq; +} + +static const int __initconst axp_nbclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 2}, {2, 2}, + {1, 2}, {1, 2}, {1, 1}, {2, 3}, + {0, 1}, {1, 2}, {2, 4}, {0, 1}, + {1, 2}, {0, 1}, {0, 1}, {2, 2}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst axp_hclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 6}, {2, 3}, + {1, 3}, {1, 4}, {1, 2}, {2, 6}, + {0, 1}, {1, 6}, {2, 10}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 2}, + {2, 6}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static const int __initconst axp_dramclk_ratios[32][2] = { + {0, 1}, {1, 2}, {2, 3}, {2, 3}, + {1, 3}, {1, 2}, {1, 2}, {2, 6}, + {0, 1}, {1, 3}, {2, 5}, {0, 1}, + {1, 4}, {0, 1}, {0, 1}, {2, 5}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {2, 3}, {0, 1}, {0, 1}, {0, 1}, + {0, 1}, {0, 1}, {0, 1}, {1, 1}, + {0, 1}, {0, 1}, {0, 1}, {0, 1}, +}; + +static void __init axp_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + u32 opt = ((readl(sar + SARL) >> SARL_AXP_FAB_FREQ_OPT) & + SARL_AXP_FAB_FREQ_OPT_MASK); + /* + * The upper bit is not contiguous to the other ones and + * located in the high part of the SAR registers + */ + opt |= (((readl(sar + SARH) >> SARH_AXP_FAB_FREQ_OPT) & + SARH_AXP_FAB_FREQ_OPT_MASK) << SARH_AXP_FAB_FREQ_OPT_SHIFT); + + switch (id) { + case AXP_CPU_TO_NBCLK: + *mult = axp_nbclk_ratios[opt][0]; + *div = axp_nbclk_ratios[opt][1]; + break; + case AXP_CPU_TO_HCLK: + *mult = axp_hclk_ratios[opt][0]; + *div = axp_hclk_ratios[opt][1]; + break; + case AXP_CPU_TO_DRAMCLK: + *mult = axp_dramclk_ratios[opt][0]; + *div = axp_dramclk_ratios[opt][1]; + break; + } +} + +static const struct coreclk_soc_desc axp_coreclks = { + .get_tclk_freq = axp_get_tclk_freq, + .get_cpu_freq = axp_get_cpu_freq, + .get_clk_ratio = axp_get_clk_ratio, + .ratios = axp_coreclk_ratios, + .num_ratios = ARRAY_SIZE(axp_coreclk_ratios), +}; + +static void __init axp_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &axp_coreclks); +} +CLK_OF_DECLARE(axp_core_clk, "marvell,armada-xp-core-clock", + axp_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst axp_gating_desc[] = { + { "audio", NULL, 0, 0 }, + { "ge3", NULL, 1, 0 }, + { "ge2", NULL, 2, 0 }, + { "ge1", NULL, 3, 0 }, + { "ge0", NULL, 4, 0 }, + { "pex00", NULL, 5, 0 }, + { "pex01", NULL, 6, 0 }, + { "pex02", NULL, 7, 0 }, + { "pex03", NULL, 8, 0 }, + { "pex10", NULL, 9, 0 }, + { "pex11", NULL, 10, 0 }, + { "pex12", NULL, 11, 0 }, + { "pex13", NULL, 12, 0 }, + { "bp", NULL, 13, 0 }, + { "sata0lnk", NULL, 14, 0 }, + { "sata0", "sata0lnk", 15, 0 }, + { "lcd", NULL, 16, 0 }, + { "sdio", NULL, 17, 0 }, + { "usb0", NULL, 18, 0 }, + { "usb1", NULL, 19, 0 }, + { "usb2", NULL, 20, 0 }, + { "xor0", NULL, 22, 0 }, + { "crypto", NULL, 23, 0 }, + { "tdm", NULL, 25, 0 }, + { "pex20", NULL, 26, 0 }, + { "pex30", NULL, 27, 0 }, + { "xor1", NULL, 28, 0 }, + { "sata1lnk", NULL, 29, 0 }, + { "sata1", "sata1lnk", 30, 0 }, + { } +}; + +static void __init axp_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, axp_gating_desc); +} +CLK_OF_DECLARE(axp_clk_gating, "marvell,armada-xp-gating-clock", + axp_clk_gating_init); diff --git a/drivers/clk/mvebu/clk-core.c b/drivers/clk/mvebu/clk-core.c deleted file mode 100644 index 0a53edb..0000000 --- a/drivers/clk/mvebu/clk-core.c +++ /dev/null @@ -1,675 +0,0 @@ -/* - * Marvell EBU clock core handling defined at reset - * - * Copyright (C) 2012 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/of_address.h> -#include <linux/io.h> -#include <linux/of.h> -#include "clk-core.h" - -struct core_ratio { - int id; - const char *name; -}; - -struct core_clocks { - u32 (*get_tclk_freq)(void __iomem *sar); - u32 (*get_cpu_freq)(void __iomem *sar); - void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); - const struct core_ratio *ratios; - int num_ratios; -}; - -static struct clk_onecell_data clk_data; - -static void __init mvebu_clk_core_setup(struct device_node *np, - struct core_clocks *coreclk) -{ - const char *tclk_name = "tclk"; - const char *cpuclk_name = "cpuclk"; - void __iomem *base; - unsigned long rate; - int n; - - base = of_iomap(np, 0); - if (WARN_ON(!base)) - return; - - /* - * Allocate struct for TCLK, cpu clk, and core ratio clocks - */ - clk_data.clk_num = 2 + coreclk->num_ratios; - clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), - GFP_KERNEL); - if (WARN_ON(!clk_data.clks)) - return; - - /* - * Register TCLK - */ - of_property_read_string_index(np, "clock-output-names", 0, - &tclk_name); - rate = coreclk->get_tclk_freq(base); - clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, - CLK_IS_ROOT, rate); - WARN_ON(IS_ERR(clk_data.clks[0])); - - /* - * Register CPU clock - */ - of_property_read_string_index(np, "clock-output-names", 1, - &cpuclk_name); - rate = coreclk->get_cpu_freq(base); - clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, - CLK_IS_ROOT, rate); - WARN_ON(IS_ERR(clk_data.clks[1])); - - /* - * Register fixed-factor clocks derived from CPU clock - */ - for (n = 0; n < coreclk->num_ratios; n++) { - const char *rclk_name = coreclk->ratios[n].name; - int mult, div; - - of_property_read_string_index(np, "clock-output-names", - 2+n, &rclk_name); - coreclk->get_clk_ratio(base, coreclk->ratios[n].id, - &mult, &div); - clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, - cpuclk_name, 0, mult, div); - WARN_ON(IS_ERR(clk_data.clks[2+n])); - }; - - /* - * SAR register isn't needed anymore - */ - iounmap(base); - - of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -} - -#ifdef CONFIG_MACH_ARMADA_370_XP -/* - * Armada 370/XP Sample At Reset is a 64 bit bitfiled split in two - * register of 32 bits - */ - -#define SARL 0 /* Low part [0:31] */ -#define SARL_AXP_PCLK_FREQ_OPT 21 -#define SARL_AXP_PCLK_FREQ_OPT_MASK 0x7 -#define SARL_A370_PCLK_FREQ_OPT 11 -#define SARL_A370_PCLK_FREQ_OPT_MASK 0xF -#define SARL_AXP_FAB_FREQ_OPT 24 -#define SARL_AXP_FAB_FREQ_OPT_MASK 0xF -#define SARL_A370_FAB_FREQ_OPT 15 -#define SARL_A370_FAB_FREQ_OPT_MASK 0x1F -#define SARL_A370_TCLK_FREQ_OPT 20 -#define SARL_A370_TCLK_FREQ_OPT_MASK 0x1 -#define SARH 4 /* High part [32:63] */ -#define SARH_AXP_PCLK_FREQ_OPT (52-32) -#define SARH_AXP_PCLK_FREQ_OPT_MASK 0x1 -#define SARH_AXP_PCLK_FREQ_OPT_SHIFT 3 -#define SARH_AXP_FAB_FREQ_OPT (51-32) -#define SARH_AXP_FAB_FREQ_OPT_MASK 0x1 -#define SARH_AXP_FAB_FREQ_OPT_SHIFT 4 - -static const u32 __initconst armada_370_tclk_frequencies[] = { - 16600000, - 20000000, -}; - -static u32 __init armada_370_get_tclk_freq(void __iomem *sar) -{ - u8 tclk_freq_select = 0; - - tclk_freq_select = ((readl(sar) >> SARL_A370_TCLK_FREQ_OPT) & - SARL_A370_TCLK_FREQ_OPT_MASK); - return armada_370_tclk_frequencies[tclk_freq_select]; -} - -static const u32 __initconst armada_370_cpu_frequencies[] = { - 400000000, - 533000000, - 667000000, - 800000000, - 1000000000, - 1067000000, - 1200000000, -}; - -static u32 __init armada_370_get_cpu_freq(void __iomem *sar) -{ - u32 cpu_freq; - u8 cpu_freq_select = 0; - - cpu_freq_select = ((readl(sar) >> SARL_A370_PCLK_FREQ_OPT) & - SARL_A370_PCLK_FREQ_OPT_MASK); - if (cpu_freq_select >= ARRAY_SIZE(armada_370_cpu_frequencies)) { - pr_err("CPU freq select unsupported %d\n", cpu_freq_select); - cpu_freq = 0; - } else - cpu_freq = armada_370_cpu_frequencies[cpu_freq_select]; - - return cpu_freq; -} - -enum { A370_XP_NBCLK, A370_XP_HCLK, A370_XP_DRAMCLK }; - -static const struct core_ratio __initconst armada_370_xp_core_ratios[] = { - { .id = A370_XP_NBCLK, .name = "nbclk" }, - { .id = A370_XP_HCLK, .name = "hclk" }, - { .id = A370_XP_DRAMCLK, .name = "dramclk" }, -}; - -static const int __initconst armada_370_xp_nbclk_ratios[32][2] = { - {0, 1}, {1, 2}, {2, 2}, {2, 2}, - {1, 2}, {1, 2}, {1, 1}, {2, 3}, - {0, 1}, {1, 2}, {2, 4}, {0, 1}, - {1, 2}, {0, 1}, {0, 1}, {2, 2}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {2, 3}, {0, 1}, {0, 1}, {0, 1}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {0, 1}, {0, 1}, {0, 1}, {0, 1}, -}; - -static const int __initconst armada_370_xp_hclk_ratios[32][2] = { - {0, 1}, {1, 2}, {2, 6}, {2, 3}, - {1, 3}, {1, 4}, {1, 2}, {2, 6}, - {0, 1}, {1, 6}, {2, 10}, {0, 1}, - {1, 4}, {0, 1}, {0, 1}, {2, 5}, - {0, 1}, {0, 1}, {0, 1}, {1, 2}, - {2, 6}, {0, 1}, {0, 1}, {0, 1}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {0, 1}, {0, 1}, {0, 1}, {0, 1}, -}; - -static const int __initconst armada_370_xp_dramclk_ratios[32][2] = { - {0, 1}, {1, 2}, {2, 3}, {2, 3}, - {1, 3}, {1, 2}, {1, 2}, {2, 6}, - {0, 1}, {1, 3}, {2, 5}, {0, 1}, - {1, 4}, {0, 1}, {0, 1}, {2, 5}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {2, 3}, {0, 1}, {0, 1}, {0, 1}, - {0, 1}, {0, 1}, {0, 1}, {1, 1}, - {0, 1}, {0, 1}, {0, 1}, {0, 1}, -}; - -static void __init armada_370_xp_get_clk_ratio(u32 opt, - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case A370_XP_NBCLK: - *mult = armada_370_xp_nbclk_ratios[opt][0]; - *div = armada_370_xp_nbclk_ratios[opt][1]; - break; - case A370_XP_HCLK: - *mult = armada_370_xp_hclk_ratios[opt][0]; - *div = armada_370_xp_hclk_ratios[opt][1]; - break; - case A370_XP_DRAMCLK: - *mult = armada_370_xp_dramclk_ratios[opt][0]; - *div = armada_370_xp_dramclk_ratios[opt][1]; - break; - } -} - -static void __init armada_370_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - u32 opt = ((readl(sar) >> SARL_A370_FAB_FREQ_OPT) & - SARL_A370_FAB_FREQ_OPT_MASK); - - armada_370_xp_get_clk_ratio(opt, sar, id, mult, div); -} - - -static const struct core_clocks armada_370_core_clocks = { - .get_tclk_freq = armada_370_get_tclk_freq, - .get_cpu_freq = armada_370_get_cpu_freq, - .get_clk_ratio = armada_370_get_clk_ratio, - .ratios = armada_370_xp_core_ratios, - .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios), -}; - -static const u32 __initconst armada_xp_cpu_frequencies[] = { - 1000000000, - 1066000000, - 1200000000, - 1333000000, - 1500000000, - 1666000000, - 1800000000, - 2000000000, - 667000000, - 0, - 800000000, - 1600000000, -}; - -/* For Armada XP TCLK frequency is fix: 250MHz */ -static u32 __init armada_xp_get_tclk_freq(void __iomem *sar) -{ - return 250 * 1000 * 1000; -} - -static u32 __init armada_xp_get_cpu_freq(void __iomem *sar) -{ - u32 cpu_freq; - u8 cpu_freq_select = 0; - - cpu_freq_select = ((readl(sar) >> SARL_AXP_PCLK_FREQ_OPT) & - SARL_AXP_PCLK_FREQ_OPT_MASK); - /* - * The upper bit is not contiguous to the other ones and - * located in the high part of the SAR registers - */ - cpu_freq_select |= (((readl(sar+4) >> SARH_AXP_PCLK_FREQ_OPT) & - SARH_AXP_PCLK_FREQ_OPT_MASK) - << SARH_AXP_PCLK_FREQ_OPT_SHIFT); - if (cpu_freq_select >= ARRAY_SIZE(armada_xp_cpu_frequencies)) { - pr_err("CPU freq select unsupported: %d\n", cpu_freq_select); - cpu_freq = 0; - } else - cpu_freq = armada_xp_cpu_frequencies[cpu_freq_select]; - - return cpu_freq; -} - -static void __init armada_xp_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - - u32 opt = ((readl(sar) >> SARL_AXP_FAB_FREQ_OPT) & - SARL_AXP_FAB_FREQ_OPT_MASK); - /* - * The upper bit is not contiguous to the other ones and - * located in the high part of the SAR registers - */ - opt |= (((readl(sar+4) >> SARH_AXP_FAB_FREQ_OPT) & - SARH_AXP_FAB_FREQ_OPT_MASK) - << SARH_AXP_FAB_FREQ_OPT_SHIFT); - - armada_370_xp_get_clk_ratio(opt, sar, id, mult, div); -} - -static const struct core_clocks armada_xp_core_clocks = { - .get_tclk_freq = armada_xp_get_tclk_freq, - .get_cpu_freq = armada_xp_get_cpu_freq, - .get_clk_ratio = armada_xp_get_clk_ratio, - .ratios = armada_370_xp_core_ratios, - .num_ratios = ARRAY_SIZE(armada_370_xp_core_ratios), -}; - -#endif /* CONFIG_MACH_ARMADA_370_XP */ - -/* - * Dove PLL sample-at-reset configuration - * - * SAR0[8:5] : CPU frequency - * 5 = 1000 MHz - * 6 = 933 MHz - * 7 = 933 MHz - * 8 = 800 MHz - * 9 = 800 MHz - * 10 = 800 MHz - * 11 = 1067 MHz - * 12 = 667 MHz - * 13 = 533 MHz - * 14 = 400 MHz - * 15 = 333 MHz - * others reserved. - * - * SAR0[11:9] : CPU to L2 Clock divider ratio - * 0 = (1/1) * CPU - * 2 = (1/2) * CPU - * 4 = (1/3) * CPU - * 6 = (1/4) * CPU - * others reserved. - * - * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio - * 0 = (1/1) * CPU - * 2 = (1/2) * CPU - * 3 = (2/5) * CPU - * 4 = (1/3) * CPU - * 6 = (1/4) * CPU - * 8 = (1/5) * CPU - * 10 = (1/6) * CPU - * 12 = (1/7) * CPU - * 14 = (1/8) * CPU - * 15 = (1/10) * CPU - * others reserved. - * - * SAR0[24:23] : TCLK frequency - * 0 = 166 MHz - * 1 = 125 MHz - * others reserved. - */ -#ifdef CONFIG_ARCH_DOVE -#define SAR_DOVE_CPU_FREQ 5 -#define SAR_DOVE_CPU_FREQ_MASK 0xf -#define SAR_DOVE_L2_RATIO 9 -#define SAR_DOVE_L2_RATIO_MASK 0x7 -#define SAR_DOVE_DDR_RATIO 12 -#define SAR_DOVE_DDR_RATIO_MASK 0xf -#define SAR_DOVE_TCLK_FREQ 23 -#define SAR_DOVE_TCLK_FREQ_MASK 0x3 - -static const u32 __initconst dove_tclk_frequencies[] = { - 166666667, - 125000000, - 0, 0 -}; - -static u32 __init dove_get_tclk_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & - SAR_DOVE_TCLK_FREQ_MASK; - return dove_tclk_frequencies[opt]; -} - -static const u32 __initconst dove_cpu_frequencies[] = { - 0, 0, 0, 0, 0, - 1000000000, - 933333333, 933333333, - 800000000, 800000000, 800000000, - 1066666667, - 666666667, - 533333333, - 400000000, - 333333333 -}; - -static u32 __init dove_get_cpu_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & - SAR_DOVE_CPU_FREQ_MASK; - return dove_cpu_frequencies[opt]; -} - -enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; - -static const struct core_ratio __initconst dove_core_ratios[] = { - { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, - { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } -}; - -static const int __initconst dove_cpu_l2_ratios[8][2] = { - { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, - { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } -}; - -static const int __initconst dove_cpu_ddr_ratios[16][2] = { - { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, - { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, - { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, - { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } -}; - -static void __init dove_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case DOVE_CPU_TO_L2: - { - u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & - SAR_DOVE_L2_RATIO_MASK; - *mult = dove_cpu_l2_ratios[opt][0]; - *div = dove_cpu_l2_ratios[opt][1]; - break; - } - case DOVE_CPU_TO_DDR: - { - u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & - SAR_DOVE_DDR_RATIO_MASK; - *mult = dove_cpu_ddr_ratios[opt][0]; - *div = dove_cpu_ddr_ratios[opt][1]; - break; - } - } -} - -static const struct core_clocks dove_core_clocks = { - .get_tclk_freq = dove_get_tclk_freq, - .get_cpu_freq = dove_get_cpu_freq, - .get_clk_ratio = dove_get_clk_ratio, - .ratios = dove_core_ratios, - .num_ratios = ARRAY_SIZE(dove_core_ratios), -}; -#endif /* CONFIG_ARCH_DOVE */ - -/* - * Kirkwood PLL sample-at-reset configuration - * (6180 has different SAR layout than other Kirkwood SoCs) - * - * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) - * 4 = 600 MHz - * 6 = 800 MHz - * 7 = 1000 MHz - * 9 = 1200 MHz - * 12 = 1500 MHz - * 13 = 1600 MHz - * 14 = 1800 MHz - * 15 = 2000 MHz - * others reserved. - * - * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) - * 1 = (1/2) * CPU - * 3 = (1/3) * CPU - * 5 = (1/4) * CPU - * others reserved. - * - * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) - * 2 = (1/2) * CPU - * 4 = (1/3) * CPU - * 6 = (1/4) * CPU - * 7 = (2/9) * CPU - * 8 = (1/5) * CPU - * 9 = (1/6) * CPU - * others reserved. - * - * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) - * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] - * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] - * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] - * others reserved. - * - * SAR0[21] : TCLK frequency - * 0 = 200 MHz - * 1 = 166 MHz - * others reserved. - */ -#ifdef CONFIG_ARCH_KIRKWOOD -#define SAR_KIRKWOOD_CPU_FREQ(x) \ - (((x & (1 << 1)) >> 1) | \ - ((x & (1 << 22)) >> 21) | \ - ((x & (3 << 3)) >> 1)) -#define SAR_KIRKWOOD_L2_RATIO(x) \ - (((x & (3 << 9)) >> 9) | \ - (((x & (1 << 19)) >> 17))) -#define SAR_KIRKWOOD_DDR_RATIO 5 -#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf -#define SAR_MV88F6180_CLK 2 -#define SAR_MV88F6180_CLK_MASK 0x7 -#define SAR_KIRKWOOD_TCLK_FREQ 21 -#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 - -enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; - -static const struct core_ratio __initconst kirkwood_core_ratios[] = { - { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, - { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } -}; - -static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & - SAR_KIRKWOOD_TCLK_FREQ_MASK; - return (opt) ? 166666667 : 200000000; -} - -static const u32 __initconst kirkwood_cpu_frequencies[] = { - 0, 0, 0, 0, - 600000000, - 0, - 800000000, - 1000000000, - 0, - 1200000000, - 0, 0, - 1500000000, - 1600000000, - 1800000000, - 2000000000 -}; - -static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) -{ - u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); - return kirkwood_cpu_frequencies[opt]; -} - -static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { - { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, - { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } -}; - -static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { - { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, - { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, - { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, - { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } -}; - -static void __init kirkwood_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case KIRKWOOD_CPU_TO_L2: - { - u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); - *mult = kirkwood_cpu_l2_ratios[opt][0]; - *div = kirkwood_cpu_l2_ratios[opt][1]; - break; - } - case KIRKWOOD_CPU_TO_DDR: - { - u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & - SAR_KIRKWOOD_DDR_RATIO_MASK; - *mult = kirkwood_cpu_ddr_ratios[opt][0]; - *div = kirkwood_cpu_ddr_ratios[opt][1]; - break; - } - } -} - -static const struct core_clocks kirkwood_core_clocks = { - .get_tclk_freq = kirkwood_get_tclk_freq, - .get_cpu_freq = kirkwood_get_cpu_freq, - .get_clk_ratio = kirkwood_get_clk_ratio, - .ratios = kirkwood_core_ratios, - .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), -}; - -static const u32 __initconst mv88f6180_cpu_frequencies[] = { - 0, 0, 0, 0, 0, - 600000000, - 800000000, - 1000000000 -}; - -static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) -{ - u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; - return mv88f6180_cpu_frequencies[opt]; -} - -static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { - { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, - { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } -}; - -static void __init mv88f6180_get_clk_ratio( - void __iomem *sar, int id, int *mult, int *div) -{ - switch (id) { - case KIRKWOOD_CPU_TO_L2: - { - /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ - *mult = 1; - *div = 2; - break; - } - case KIRKWOOD_CPU_TO_DDR: - { - u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & - SAR_MV88F6180_CLK_MASK; - *mult = mv88f6180_cpu_ddr_ratios[opt][0]; - *div = mv88f6180_cpu_ddr_ratios[opt][1]; - break; - } - } -} - -static const struct core_clocks mv88f6180_core_clocks = { - .get_tclk_freq = kirkwood_get_tclk_freq, - .get_cpu_freq = mv88f6180_get_cpu_freq, - .get_clk_ratio = mv88f6180_get_clk_ratio, - .ratios = kirkwood_core_ratios, - .num_ratios = ARRAY_SIZE(kirkwood_core_ratios), -}; -#endif /* CONFIG_ARCH_KIRKWOOD */ - -static const __initdata struct of_device_id clk_core_match[] = { -#ifdef CONFIG_MACH_ARMADA_370_XP - { - .compatible = "marvell,armada-370-core-clock", - .data = &armada_370_core_clocks, - }, - { - .compatible = "marvell,armada-xp-core-clock", - .data = &armada_xp_core_clocks, - }, -#endif -#ifdef CONFIG_ARCH_DOVE - { - .compatible = "marvell,dove-core-clock", - .data = &dove_core_clocks, - }, -#endif - -#ifdef CONFIG_ARCH_KIRKWOOD - { - .compatible = "marvell,kirkwood-core-clock", - .data = &kirkwood_core_clocks, - }, - { - .compatible = "marvell,mv88f6180-core-clock", - .data = &mv88f6180_core_clocks, - }, -#endif - - { } -}; - -void __init mvebu_core_clk_init(void) -{ - struct device_node *np; - - for_each_matching_node(np, clk_core_match) { - const struct of_device_id *match = - of_match_node(clk_core_match, np); - mvebu_clk_core_setup(np, (struct core_clocks *)match->data); - } -} diff --git a/drivers/clk/mvebu/clk-core.h b/drivers/clk/mvebu/clk-core.h deleted file mode 100644 index 28b5e02..0000000 --- a/drivers/clk/mvebu/clk-core.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * * Marvell EBU clock core handling defined at reset - * - * Copyright (C) 2012 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MVEBU_CLK_CORE_H -#define __MVEBU_CLK_CORE_H - -void __init mvebu_core_clk_init(void); - -#endif diff --git a/drivers/clk/mvebu/clk-gating-ctrl.c b/drivers/clk/mvebu/clk-gating-ctrl.c deleted file mode 100644 index ebf141d..0000000 --- a/drivers/clk/mvebu/clk-gating-ctrl.c +++ /dev/null @@ -1,250 +0,0 @@ -/* - * Marvell MVEBU clock gating control. - * - * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> - * Andrew Lunn <andrew@lunn.ch> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/kernel.h> -#include <linux/bitops.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/clkdev.h> -#include <linux/clk-provider.h> -#include <linux/clk/mvebu.h> -#include <linux/of.h> -#include <linux/of_address.h> - -struct mvebu_gating_ctrl { - spinlock_t lock; - struct clk **gates; - int num_gates; -}; - -struct mvebu_soc_descr { - const char *name; - const char *parent; - int bit_idx; -}; - -#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) - -static struct clk *mvebu_clk_gating_get_src( - struct of_phandle_args *clkspec, void *data) -{ - struct mvebu_gating_ctrl *ctrl = (struct mvebu_gating_ctrl *)data; - int n; - - if (clkspec->args_count < 1) - return ERR_PTR(-EINVAL); - - for (n = 0; n < ctrl->num_gates; n++) { - struct clk_gate *gate = - to_clk_gate(__clk_get_hw(ctrl->gates[n])); - if (clkspec->args[0] == gate->bit_idx) - return ctrl->gates[n]; - } - return ERR_PTR(-ENODEV); -} - -static void __init mvebu_clk_gating_setup( - struct device_node *np, const struct mvebu_soc_descr *descr) -{ - struct mvebu_gating_ctrl *ctrl; - struct clk *clk; - void __iomem *base; - const char *default_parent = NULL; - int n; - - base = of_iomap(np, 0); - - clk = of_clk_get(np, 0); - if (!IS_ERR(clk)) { - default_parent = __clk_get_name(clk); - clk_put(clk); - } - - ctrl = kzalloc(sizeof(struct mvebu_gating_ctrl), GFP_KERNEL); - if (WARN_ON(!ctrl)) - return; - - spin_lock_init(&ctrl->lock); - - /* - * Count, allocate, and register clock gates - */ - for (n = 0; descr[n].name;) - n++; - - ctrl->num_gates = n; - ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *), - GFP_KERNEL); - if (WARN_ON(!ctrl->gates)) { - kfree(ctrl); - return; - } - - for (n = 0; n < ctrl->num_gates; n++) { - u8 flags = 0; - const char *parent = - (descr[n].parent) ? descr[n].parent : default_parent; - - /* - * On Armada 370, the DDR clock is a special case: it - * isn't taken by any driver, but should anyway be - * kept enabled, so we mark it as IGNORE_UNUSED for - * now. - */ - if (!strcmp(descr[n].name, "ddr")) - flags |= CLK_IGNORE_UNUSED; - - ctrl->gates[n] = clk_register_gate(NULL, descr[n].name, parent, - flags, base, descr[n].bit_idx, 0, &ctrl->lock); - WARN_ON(IS_ERR(ctrl->gates[n])); - } - of_clk_add_provider(np, mvebu_clk_gating_get_src, ctrl); -} - -/* - * SoC specific clock gating control - */ - -#ifdef CONFIG_MACH_ARMADA_370 -static const struct mvebu_soc_descr __initconst armada_370_gating_descr[] = { - { "audio", NULL, 0 }, - { "pex0_en", NULL, 1 }, - { "pex1_en", NULL, 2 }, - { "ge1", NULL, 3 }, - { "ge0", NULL, 4 }, - { "pex0", NULL, 5 }, - { "pex1", NULL, 9 }, - { "sata0", NULL, 15 }, - { "sdio", NULL, 17 }, - { "tdm", NULL, 25 }, - { "ddr", NULL, 28 }, - { "sata1", NULL, 30 }, - { } -}; -#endif - -#ifdef CONFIG_MACH_ARMADA_XP -static const struct mvebu_soc_descr __initconst armada_xp_gating_descr[] = { - { "audio", NULL, 0 }, - { "ge3", NULL, 1 }, - { "ge2", NULL, 2 }, - { "ge1", NULL, 3 }, - { "ge0", NULL, 4 }, - { "pex0", NULL, 5 }, - { "pex1", NULL, 6 }, - { "pex2", NULL, 7 }, - { "pex3", NULL, 8 }, - { "bp", NULL, 13 }, - { "sata0lnk", NULL, 14 }, - { "sata0", "sata0lnk", 15 }, - { "lcd", NULL, 16 }, - { "sdio", NULL, 17 }, - { "usb0", NULL, 18 }, - { "usb1", NULL, 19 }, - { "usb2", NULL, 20 }, - { "xor0", NULL, 22 }, - { "crypto", NULL, 23 }, - { "tdm", NULL, 25 }, - { "xor1", NULL, 28 }, - { "sata1lnk", NULL, 29 }, - { "sata1", "sata1lnk", 30 }, - { } -}; -#endif - -#ifdef CONFIG_ARCH_DOVE -static const struct mvebu_soc_descr __initconst dove_gating_descr[] = { - { "usb0", NULL, 0 }, - { "usb1", NULL, 1 }, - { "ge", "gephy", 2 }, - { "sata", NULL, 3 }, - { "pex0", NULL, 4 }, - { "pex1", NULL, 5 }, - { "sdio0", NULL, 8 }, - { "sdio1", NULL, 9 }, - { "nand", NULL, 10 }, - { "camera", NULL, 11 }, - { "i2s0", NULL, 12 }, - { "i2s1", NULL, 13 }, - { "crypto", NULL, 15 }, - { "ac97", NULL, 21 }, - { "pdma", NULL, 22 }, - { "xor0", NULL, 23 }, - { "xor1", NULL, 24 }, - { "gephy", NULL, 30 }, - { } -}; -#endif - -#ifdef CONFIG_ARCH_KIRKWOOD -static const struct mvebu_soc_descr __initconst kirkwood_gating_descr[] = { - { "ge0", NULL, 0 }, - { "pex0", NULL, 2 }, - { "usb0", NULL, 3 }, - { "sdio", NULL, 4 }, - { "tsu", NULL, 5 }, - { "runit", NULL, 7 }, - { "xor0", NULL, 8 }, - { "audio", NULL, 9 }, - { "powersave", "cpuclk", 11 }, - { "sata0", NULL, 14 }, - { "sata1", NULL, 15 }, - { "xor1", NULL, 16 }, - { "crypto", NULL, 17 }, - { "pex1", NULL, 18 }, - { "ge1", NULL, 19 }, - { "tdm", NULL, 20 }, - { } -}; -#endif - -static const __initdata struct of_device_id clk_gating_match[] = { -#ifdef CONFIG_MACH_ARMADA_370 - { - .compatible = "marvell,armada-370-gating-clock", - .data = armada_370_gating_descr, - }, -#endif - -#ifdef CONFIG_MACH_ARMADA_XP - { - .compatible = "marvell,armada-xp-gating-clock", - .data = armada_xp_gating_descr, - }, -#endif - -#ifdef CONFIG_ARCH_DOVE - { - .compatible = "marvell,dove-gating-clock", - .data = dove_gating_descr, - }, -#endif - -#ifdef CONFIG_ARCH_KIRKWOOD - { - .compatible = "marvell,kirkwood-gating-clock", - .data = kirkwood_gating_descr, - }, -#endif - - { } -}; - -void __init mvebu_gating_clk_init(void) -{ - struct device_node *np; - - for_each_matching_node(np, clk_gating_match) { - const struct of_device_id *match = - of_match_node(clk_gating_match, np); - mvebu_clk_gating_setup(np, - (const struct mvebu_soc_descr *)match->data); - } -} diff --git a/drivers/clk/mvebu/clk-gating-ctrl.h b/drivers/clk/mvebu/clk-gating-ctrl.h deleted file mode 100644 index 9275d1e..0000000 --- a/drivers/clk/mvebu/clk-gating-ctrl.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * Marvell EBU gating clock handling - * - * Copyright (C) 2012 Marvell - * - * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MVEBU_CLK_GATING_H -#define __MVEBU_CLK_GATING_H - -#ifdef CONFIG_MVEBU_CLK_GATING -void __init mvebu_gating_clk_init(void); -#else -void mvebu_gating_clk_init(void) {} -#endif - -#endif diff --git a/drivers/clk/mvebu/clk.c b/drivers/clk/mvebu/clk.c deleted file mode 100644 index 29f10fb..0000000 --- a/drivers/clk/mvebu/clk.c +++ /dev/null @@ -1,23 +0,0 @@ -/* - * Marvell EBU SoC clock handling. - * - * Copyright (C) 2012 Marvell - * - * Gregory CLEMENT <gregory.clement@free-electrons.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ -#include <linux/kernel.h> -#include <linux/clk-provider.h> -#include <linux/of.h> -#include "clk-core.h" -#include "clk-gating-ctrl.h" - -void __init mvebu_clocks_init(void) -{ - mvebu_core_clk_init(); - mvebu_gating_clk_init(); - of_clk_init(NULL); -} diff --git a/drivers/clk/mvebu/common.c b/drivers/clk/mvebu/common.c new file mode 100644 index 0000000..adaa4a1 --- /dev/null +++ b/drivers/clk/mvebu/common.c @@ -0,0 +1,163 @@ +/* + * Marvell EBU SoC common clock handling + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk.h> +#include <linux/clkdev.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#include "common.h" + +/* + * Core Clocks + */ + +static struct clk_onecell_data clk_data; + +void __init mvebu_coreclk_setup(struct device_node *np, + const struct coreclk_soc_desc *desc) +{ + const char *tclk_name = "tclk"; + const char *cpuclk_name = "cpuclk"; + void __iomem *base; + unsigned long rate; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + /* Allocate struct for TCLK, cpu clk, and core ratio clocks */ + clk_data.clk_num = 2 + desc->num_ratios; + clk_data.clks = kzalloc(clk_data.clk_num * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!clk_data.clks)) + return; + + /* Register TCLK */ + of_property_read_string_index(np, "clock-output-names", 0, + &tclk_name); + rate = desc->get_tclk_freq(base); + clk_data.clks[0] = clk_register_fixed_rate(NULL, tclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[0])); + + /* Register CPU clock */ + of_property_read_string_index(np, "clock-output-names", 1, + &cpuclk_name); + rate = desc->get_cpu_freq(base); + clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL, + CLK_IS_ROOT, rate); + WARN_ON(IS_ERR(clk_data.clks[1])); + + /* Register fixed-factor clocks derived from CPU clock */ + for (n = 0; n < desc->num_ratios; n++) { + const char *rclk_name = desc->ratios[n].name; + int mult, div; + + of_property_read_string_index(np, "clock-output-names", + 2+n, &rclk_name); + desc->get_clk_ratio(base, desc->ratios[n].id, &mult, &div); + clk_data.clks[2+n] = clk_register_fixed_factor(NULL, rclk_name, + cpuclk_name, 0, mult, div); + WARN_ON(IS_ERR(clk_data.clks[2+n])); + }; + + /* SAR register isn't needed anymore */ + iounmap(base); + + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +/* + * Clock Gating Control + */ + +struct clk_gating_ctrl { + spinlock_t lock; + struct clk **gates; + int num_gates; +}; + +#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) + +static struct clk *clk_gating_get_src( + struct of_phandle_args *clkspec, void *data) +{ + struct clk_gating_ctrl *ctrl = (struct clk_gating_ctrl *)data; + int n; + + if (clkspec->args_count < 1) + return ERR_PTR(-EINVAL); + + for (n = 0; n < ctrl->num_gates; n++) { + struct clk_gate *gate = + to_clk_gate(__clk_get_hw(ctrl->gates[n])); + if (clkspec->args[0] == gate->bit_idx) + return ctrl->gates[n]; + } + return ERR_PTR(-ENODEV); +} + +void __init mvebu_clk_gating_setup(struct device_node *np, + const struct clk_gating_soc_desc *desc) +{ + struct clk_gating_ctrl *ctrl; + struct clk *clk; + void __iomem *base; + const char *default_parent = NULL; + int n; + + base = of_iomap(np, 0); + if (WARN_ON(!base)) + return; + + clk = of_clk_get(np, 0); + if (!IS_ERR(clk)) { + default_parent = __clk_get_name(clk); + clk_put(clk); + } + + ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); + if (WARN_ON(!ctrl)) + return; + + spin_lock_init(&ctrl->lock); + + /* Count, allocate, and register clock gates */ + for (n = 0; desc[n].name;) + n++; + + ctrl->num_gates = n; + ctrl->gates = kzalloc(ctrl->num_gates * sizeof(struct clk *), + GFP_KERNEL); + if (WARN_ON(!ctrl->gates)) { + kfree(ctrl); + return; + } + + for (n = 0; n < ctrl->num_gates; n++) { + const char *parent = + (desc[n].parent) ? desc[n].parent : default_parent; + ctrl->gates[n] = clk_register_gate(NULL, desc[n].name, parent, + desc[n].flags, base, desc[n].bit_idx, + 0, &ctrl->lock); + WARN_ON(IS_ERR(ctrl->gates[n])); + } + + of_clk_add_provider(np, clk_gating_get_src, ctrl); +} diff --git a/drivers/clk/mvebu/common.h b/drivers/clk/mvebu/common.h new file mode 100644 index 0000000..f968b4d --- /dev/null +++ b/drivers/clk/mvebu/common.h @@ -0,0 +1,48 @@ +/* + * Marvell EBU SoC common clock handling + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __CLK_MVEBU_COMMON_H_ +#define __CLK_MVEBU_COMMON_H_ + +#include <linux/kernel.h> + +struct device_node; + +struct coreclk_ratio { + int id; + const char *name; +}; + +struct coreclk_soc_desc { + u32 (*get_tclk_freq)(void __iomem *sar); + u32 (*get_cpu_freq)(void __iomem *sar); + void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div); + const struct coreclk_ratio *ratios; + int num_ratios; +}; + +struct clk_gating_soc_desc { + const char *name; + const char *parent; + int bit_idx; + unsigned long flags; +}; + +void __init mvebu_coreclk_setup(struct device_node *np, + const struct coreclk_soc_desc *desc); + +void __init mvebu_clk_gating_setup(struct device_node *np, + const struct clk_gating_soc_desc *desc); + +#endif diff --git a/drivers/clk/mvebu/dove.c b/drivers/clk/mvebu/dove.c new file mode 100644 index 0000000..79d7aed --- /dev/null +++ b/drivers/clk/mvebu/dove.c @@ -0,0 +1,194 @@ +/* + * Marvell Dove SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + * + * Dove PLL sample-at-reset configuration + * + * SAR0[8:5] : CPU frequency + * 5 = 1000 MHz + * 6 = 933 MHz + * 7 = 933 MHz + * 8 = 800 MHz + * 9 = 800 MHz + * 10 = 800 MHz + * 11 = 1067 MHz + * 12 = 667 MHz + * 13 = 533 MHz + * 14 = 400 MHz + * 15 = 333 MHz + * others reserved. + * + * SAR0[11:9] : CPU to L2 Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * others reserved. + * + * SAR0[15:12] : CPU to DDR DRAM Clock divider ratio + * 0 = (1/1) * CPU + * 2 = (1/2) * CPU + * 3 = (2/5) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 8 = (1/5) * CPU + * 10 = (1/6) * CPU + * 12 = (1/7) * CPU + * 14 = (1/8) * CPU + * 15 = (1/10) * CPU + * others reserved. + * + * SAR0[24:23] : TCLK frequency + * 0 = 166 MHz + * 1 = 125 MHz + * others reserved. + */ + +#define SAR_DOVE_CPU_FREQ 5 +#define SAR_DOVE_CPU_FREQ_MASK 0xf +#define SAR_DOVE_L2_RATIO 9 +#define SAR_DOVE_L2_RATIO_MASK 0x7 +#define SAR_DOVE_DDR_RATIO 12 +#define SAR_DOVE_DDR_RATIO_MASK 0xf +#define SAR_DOVE_TCLK_FREQ 23 +#define SAR_DOVE_TCLK_FREQ_MASK 0x3 + +enum { DOVE_CPU_TO_L2, DOVE_CPU_TO_DDR }; + +static const struct coreclk_ratio __initconst dove_coreclk_ratios[] = { + { .id = DOVE_CPU_TO_L2, .name = "l2clk", }, + { .id = DOVE_CPU_TO_DDR, .name = "ddrclk", } +}; + +static const u32 __initconst dove_tclk_freqs[] = { + 166666667, + 125000000, + 0, 0 +}; + +static u32 __init dove_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_TCLK_FREQ) & + SAR_DOVE_TCLK_FREQ_MASK; + return dove_tclk_freqs[opt]; +} + +static const u32 __initconst dove_cpu_freqs[] = { + 0, 0, 0, 0, 0, + 1000000000, + 933333333, 933333333, + 800000000, 800000000, 800000000, + 1066666667, + 666666667, + 533333333, + 400000000, + 333333333 +}; + +static u32 __init dove_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_DOVE_CPU_FREQ) & + SAR_DOVE_CPU_FREQ_MASK; + return dove_cpu_freqs[opt]; +} + +static const int __initconst dove_cpu_l2_ratios[8][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 } +}; + +static const int __initconst dove_cpu_ddr_ratios[16][2] = { + { 1, 1 }, { 0, 1 }, { 1, 2 }, { 2, 5 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 0, 1 }, + { 1, 5 }, { 0, 1 }, { 1, 6 }, { 0, 1 }, + { 1, 7 }, { 0, 1 }, { 1, 8 }, { 1, 10 } +}; + +static void __init dove_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case DOVE_CPU_TO_L2: + { + u32 opt = (readl(sar) >> SAR_DOVE_L2_RATIO) & + SAR_DOVE_L2_RATIO_MASK; + *mult = dove_cpu_l2_ratios[opt][0]; + *div = dove_cpu_l2_ratios[opt][1]; + break; + } + case DOVE_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_DOVE_DDR_RATIO) & + SAR_DOVE_DDR_RATIO_MASK; + *mult = dove_cpu_ddr_ratios[opt][0]; + *div = dove_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct coreclk_soc_desc dove_coreclks = { + .get_tclk_freq = dove_get_tclk_freq, + .get_cpu_freq = dove_get_cpu_freq, + .get_clk_ratio = dove_get_clk_ratio, + .ratios = dove_coreclk_ratios, + .num_ratios = ARRAY_SIZE(dove_coreclk_ratios), +}; + +static void __init dove_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &dove_coreclks); +} +CLK_OF_DECLARE(dove_core_clk, "marvell,dove-core-clock", dove_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst dove_gating_desc[] = { + { "usb0", NULL, 0, 0 }, + { "usb1", NULL, 1, 0 }, + { "ge", "gephy", 2, 0 }, + { "sata", NULL, 3, 0 }, + { "pex0", NULL, 4, 0 }, + { "pex1", NULL, 5, 0 }, + { "sdio0", NULL, 8, 0 }, + { "sdio1", NULL, 9, 0 }, + { "nand", NULL, 10, 0 }, + { "camera", NULL, 11, 0 }, + { "i2s0", NULL, 12, 0 }, + { "i2s1", NULL, 13, 0 }, + { "crypto", NULL, 15, 0 }, + { "ac97", NULL, 21, 0 }, + { "pdma", NULL, 22, 0 }, + { "xor0", NULL, 23, 0 }, + { "xor1", NULL, 24, 0 }, + { "gephy", NULL, 30, 0 }, + { } +}; + +static void __init dove_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, dove_gating_desc); +} +CLK_OF_DECLARE(dove_clk_gating, "marvell,dove-gating-clock", + dove_clk_gating_init); diff --git a/drivers/clk/mvebu/kirkwood.c b/drivers/clk/mvebu/kirkwood.c new file mode 100644 index 0000000..71d2461 --- /dev/null +++ b/drivers/clk/mvebu/kirkwood.c @@ -0,0 +1,247 @@ +/* + * Marvell Kirkwood SoC clocks + * + * Copyright (C) 2012 Marvell + * + * Gregory CLEMENT <gregory.clement@free-electrons.com> + * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> + * Andrew Lunn <andrew@lunn.ch> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/clk-provider.h> +#include <linux/io.h> +#include <linux/of.h> +#include "common.h" + +/* + * Core Clocks + * + * Kirkwood PLL sample-at-reset configuration + * (6180 has different SAR layout than other Kirkwood SoCs) + * + * SAR0[4:3,22,1] : CPU frequency (6281,6292,6282) + * 4 = 600 MHz + * 6 = 800 MHz + * 7 = 1000 MHz + * 9 = 1200 MHz + * 12 = 1500 MHz + * 13 = 1600 MHz + * 14 = 1800 MHz + * 15 = 2000 MHz + * others reserved. + * + * SAR0[19,10:9] : CPU to L2 Clock divider ratio (6281,6292,6282) + * 1 = (1/2) * CPU + * 3 = (1/3) * CPU + * 5 = (1/4) * CPU + * others reserved. + * + * SAR0[8:5] : CPU to DDR DRAM Clock divider ratio (6281,6292,6282) + * 2 = (1/2) * CPU + * 4 = (1/3) * CPU + * 6 = (1/4) * CPU + * 7 = (2/9) * CPU + * 8 = (1/5) * CPU + * 9 = (1/6) * CPU + * others reserved. + * + * SAR0[4:2] : Kirkwood 6180 cpu/l2/ddr clock configuration (6180 only) + * 5 = [CPU = 600 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/3) * CPU] + * 6 = [CPU = 800 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/4) * CPU] + * 7 = [CPU = 1000 MHz, L2 = (1/2) * CPU, DDR = 200 MHz = (1/5) * CPU] + * others reserved. + * + * SAR0[21] : TCLK frequency + * 0 = 200 MHz + * 1 = 166 MHz + * others reserved. + */ + +#define SAR_KIRKWOOD_CPU_FREQ(x) \ + (((x & (1 << 1)) >> 1) | \ + ((x & (1 << 22)) >> 21) | \ + ((x & (3 << 3)) >> 1)) +#define SAR_KIRKWOOD_L2_RATIO(x) \ + (((x & (3 << 9)) >> 9) | \ + (((x & (1 << 19)) >> 17))) +#define SAR_KIRKWOOD_DDR_RATIO 5 +#define SAR_KIRKWOOD_DDR_RATIO_MASK 0xf +#define SAR_MV88F6180_CLK 2 +#define SAR_MV88F6180_CLK_MASK 0x7 +#define SAR_KIRKWOOD_TCLK_FREQ 21 +#define SAR_KIRKWOOD_TCLK_FREQ_MASK 0x1 + +enum { KIRKWOOD_CPU_TO_L2, KIRKWOOD_CPU_TO_DDR }; + +static const struct coreclk_ratio __initconst kirkwood_coreclk_ratios[] = { + { .id = KIRKWOOD_CPU_TO_L2, .name = "l2clk", }, + { .id = KIRKWOOD_CPU_TO_DDR, .name = "ddrclk", } +}; + +static u32 __init kirkwood_get_tclk_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_KIRKWOOD_TCLK_FREQ) & + SAR_KIRKWOOD_TCLK_FREQ_MASK; + return (opt) ? 166666667 : 200000000; +} + +static const u32 __initconst kirkwood_cpu_freqs[] = { + 0, 0, 0, 0, + 600000000, + 0, + 800000000, + 1000000000, + 0, + 1200000000, + 0, 0, + 1500000000, + 1600000000, + 1800000000, + 2000000000 +}; + +static u32 __init kirkwood_get_cpu_freq(void __iomem *sar) +{ + u32 opt = SAR_KIRKWOOD_CPU_FREQ(readl(sar)); + return kirkwood_cpu_freqs[opt]; +} + +static const int __initconst kirkwood_cpu_l2_ratios[8][2] = { + { 0, 1 }, { 1, 2 }, { 0, 1 }, { 1, 3 }, + { 0, 1 }, { 1, 4 }, { 0, 1 }, { 0, 1 } +}; + +static const int __initconst kirkwood_cpu_ddr_ratios[16][2] = { + { 0, 1 }, { 0, 1 }, { 1, 2 }, { 0, 1 }, + { 1, 3 }, { 0, 1 }, { 1, 4 }, { 2, 9 }, + { 1, 5 }, { 1, 6 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 } +}; + +static void __init kirkwood_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + u32 opt = SAR_KIRKWOOD_L2_RATIO(readl(sar)); + *mult = kirkwood_cpu_l2_ratios[opt][0]; + *div = kirkwood_cpu_l2_ratios[opt][1]; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_KIRKWOOD_DDR_RATIO) & + SAR_KIRKWOOD_DDR_RATIO_MASK; + *mult = kirkwood_cpu_ddr_ratios[opt][0]; + *div = kirkwood_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const u32 __initconst mv88f6180_cpu_freqs[] = { + 0, 0, 0, 0, 0, + 600000000, + 800000000, + 1000000000 +}; + +static u32 __init mv88f6180_get_cpu_freq(void __iomem *sar) +{ + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & SAR_MV88F6180_CLK_MASK; + return mv88f6180_cpu_freqs[opt]; +} + +static const int __initconst mv88f6180_cpu_ddr_ratios[8][2] = { + { 0, 1 }, { 0, 1 }, { 0, 1 }, { 0, 1 }, + { 0, 1 }, { 1, 3 }, { 1, 4 }, { 1, 5 } +}; + +static void __init mv88f6180_get_clk_ratio( + void __iomem *sar, int id, int *mult, int *div) +{ + switch (id) { + case KIRKWOOD_CPU_TO_L2: + { + /* mv88f6180 has a fixed 1:2 CPU-to-L2 ratio */ + *mult = 1; + *div = 2; + break; + } + case KIRKWOOD_CPU_TO_DDR: + { + u32 opt = (readl(sar) >> SAR_MV88F6180_CLK) & + SAR_MV88F6180_CLK_MASK; + *mult = mv88f6180_cpu_ddr_ratios[opt][0]; + *div = mv88f6180_cpu_ddr_ratios[opt][1]; + break; + } + } +} + +static const struct coreclk_soc_desc kirkwood_coreclks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = kirkwood_get_cpu_freq, + .get_clk_ratio = kirkwood_get_clk_ratio, + .ratios = kirkwood_coreclk_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios), +}; + +static void __init kirkwood_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &kirkwood_coreclks); +} +CLK_OF_DECLARE(kirkwood_core_clk, "marvell,kirkwood-core-clock", + kirkwood_coreclk_init); + +static const struct coreclk_soc_desc mv88f6180_coreclks = { + .get_tclk_freq = kirkwood_get_tclk_freq, + .get_cpu_freq = mv88f6180_get_cpu_freq, + .get_clk_ratio = mv88f6180_get_clk_ratio, + .ratios = kirkwood_coreclk_ratios, + .num_ratios = ARRAY_SIZE(kirkwood_coreclk_ratios), +}; + +static void __init mv88f6180_coreclk_init(struct device_node *np) +{ + mvebu_coreclk_setup(np, &mv88f6180_coreclks); +} +CLK_OF_DECLARE(mv88f6180_core_clk, "marvell,mv88f6180-core-clock", + mv88f6180_coreclk_init); + +/* + * Clock Gating Control + */ + +static const struct clk_gating_soc_desc __initconst kirkwood_gating_desc[] = { + { "ge0", NULL, 0, 0 }, + { "pex0", NULL, 2, 0 }, + { "usb0", NULL, 3, 0 }, + { "sdio", NULL, 4, 0 }, + { "tsu", NULL, 5, 0 }, + { "runit", NULL, 7, 0 }, + { "xor0", NULL, 8, 0 }, + { "audio", NULL, 9, 0 }, + { "powersave", "cpuclk", 11, 0 }, + { "sata0", NULL, 14, 0 }, + { "sata1", NULL, 15, 0 }, + { "xor1", NULL, 16, 0 }, + { "crypto", NULL, 17, 0 }, + { "pex1", NULL, 18, 0 }, + { "ge1", NULL, 19, 0 }, + { "tdm", NULL, 20, 0 }, + { } +}; + +static void __init kirkwood_clk_gating_init(struct device_node *np) +{ + mvebu_clk_gating_setup(np, kirkwood_gating_desc); +} +CLK_OF_DECLARE(kirkwood_clk_gating, "marvell,kirkwood-gating-clock", + kirkwood_clk_gating_init); diff --git a/drivers/clk/socfpga/clk.c b/drivers/clk/socfpga/clk.c index bd11315..5bb848c 100644 --- a/drivers/clk/socfpga/clk.c +++ b/drivers/clk/socfpga/clk.c @@ -24,15 +24,17 @@ #include <linux/of.h> /* Clock Manager offsets */ -#define CLKMGR_CTRL 0x0 -#define CLKMGR_BYPASS 0x4 +#define CLKMGR_CTRL 0x0 +#define CLKMGR_BYPASS 0x4 +#define CLKMGR_L4SRC 0x70 +#define CLKMGR_PERPLL_SRC 0xAC /* Clock bypass bits */ -#define MAINPLL_BYPASS (1<<0) -#define SDRAMPLL_BYPASS (1<<1) -#define SDRAMPLL_SRC_BYPASS (1<<2) -#define PERPLL_BYPASS (1<<3) -#define PERPLL_SRC_BYPASS (1<<4) +#define MAINPLL_BYPASS (1<<0) +#define SDRAMPLL_BYPASS (1<<1) +#define SDRAMPLL_SRC_BYPASS (1<<2) +#define PERPLL_BYPASS (1<<3) +#define PERPLL_SRC_BYPASS (1<<4) #define SOCFPGA_PLL_BG_PWRDWN 0 #define SOCFPGA_PLL_EXT_ENA 1 @@ -41,6 +43,17 @@ #define SOCFPGA_PLL_DIVF_SHIFT 3 #define SOCFPGA_PLL_DIVQ_MASK 0x003F0000 #define SOCFPGA_PLL_DIVQ_SHIFT 16 +#define SOCFGPA_MAX_PARENTS 3 + +#define SOCFPGA_L4_MP_CLK "l4_mp_clk" +#define SOCFPGA_L4_SP_CLK "l4_sp_clk" +#define SOCFPGA_NAND_CLK "nand_clk" +#define SOCFPGA_NAND_X_CLK "nand_x_clk" +#define SOCFPGA_MMC_CLK "mmc_clk" +#define SOCFPGA_DB_CLK "gpio_db_clk" + +#define div_mask(width) ((1 << (width)) - 1) +#define streq(a, b) (strcmp((a), (b)) == 0) extern void __iomem *clk_mgr_base_addr; @@ -49,6 +62,9 @@ struct socfpga_clk { char *parent_name; char *clk_name; u32 fixed_div; + void __iomem *div_reg; + u32 width; /* only valid if div_reg != 0 */ + u32 shift; /* only valid if div_reg != 0 */ }; #define to_socfpga_clk(p) container_of(p, struct socfpga_clk, hw.hw) @@ -132,8 +148,9 @@ static __init struct clk *socfpga_clk_init(struct device_node *node, socfpga_clk->hw.hw.init = &init; - if (strcmp(clk_name, "main_pll") || strcmp(clk_name, "periph_pll") || - strcmp(clk_name, "sdram_pll")) { + if (streq(clk_name, "main_pll") || + streq(clk_name, "periph_pll") || + streq(clk_name, "sdram_pll")) { socfpga_clk->hw.bit_idx = SOCFPGA_PLL_EXT_ENA; clk_pll_ops.enable = clk_gate_ops.enable; clk_pll_ops.disable = clk_gate_ops.disable; @@ -148,6 +165,159 @@ static __init struct clk *socfpga_clk_init(struct device_node *node, return clk; } +static u8 socfpga_clk_get_parent(struct clk_hw *hwclk) +{ + u32 l4_src; + u32 perpll_src; + + if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) { + l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + return l4_src &= 0x1; + } + if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) { + l4_src = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + return !!(l4_src & 2); + } + + perpll_src = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC); + if (streq(hwclk->init->name, SOCFPGA_MMC_CLK)) + return perpll_src &= 0x3; + if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) || + streq(hwclk->init->name, SOCFPGA_NAND_X_CLK)) + return (perpll_src >> 2) & 3; + + /* QSPI clock */ + return (perpll_src >> 4) & 3; + +} + +static int socfpga_clk_set_parent(struct clk_hw *hwclk, u8 parent) +{ + u32 src_reg; + + if (streq(hwclk->init->name, SOCFPGA_L4_MP_CLK)) { + src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + src_reg &= ~0x1; + src_reg |= parent; + writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC); + } else if (streq(hwclk->init->name, SOCFPGA_L4_SP_CLK)) { + src_reg = readl(clk_mgr_base_addr + CLKMGR_L4SRC); + src_reg &= ~0x2; + src_reg |= (parent << 1); + writel(src_reg, clk_mgr_base_addr + CLKMGR_L4SRC); + } else { + src_reg = readl(clk_mgr_base_addr + CLKMGR_PERPLL_SRC); + if (streq(hwclk->init->name, SOCFPGA_MMC_CLK)) { + src_reg &= ~0x3; + src_reg |= parent; + } else if (streq(hwclk->init->name, SOCFPGA_NAND_CLK) || + streq(hwclk->init->name, SOCFPGA_NAND_X_CLK)) { + src_reg &= ~0xC; + src_reg |= (parent << 2); + } else {/* QSPI clock */ + src_reg &= ~0x30; + src_reg |= (parent << 4); + } + writel(src_reg, clk_mgr_base_addr + CLKMGR_PERPLL_SRC); + } + + return 0; +} + +static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk, + unsigned long parent_rate) +{ + struct socfpga_clk *socfpgaclk = to_socfpga_clk(hwclk); + u32 div = 1, val; + + if (socfpgaclk->fixed_div) + div = socfpgaclk->fixed_div; + else if (socfpgaclk->div_reg) { + val = readl(socfpgaclk->div_reg) >> socfpgaclk->shift; + val &= div_mask(socfpgaclk->width); + if (streq(hwclk->init->name, SOCFPGA_DB_CLK)) + div = val + 1; + else + div = (1 << val); + } + + return parent_rate / div; +} + +static struct clk_ops gateclk_ops = { + .recalc_rate = socfpga_clk_recalc_rate, + .get_parent = socfpga_clk_get_parent, + .set_parent = socfpga_clk_set_parent, +}; + +static void __init socfpga_gate_clk_init(struct device_node *node, + const struct clk_ops *ops) +{ + u32 clk_gate[2]; + u32 div_reg[3]; + u32 fixed_div; + struct clk *clk; + struct socfpga_clk *socfpga_clk; + const char *clk_name = node->name; + const char *parent_name[SOCFGPA_MAX_PARENTS]; + struct clk_init_data init; + int rc; + int i = 0; + + socfpga_clk = kzalloc(sizeof(*socfpga_clk), GFP_KERNEL); + if (WARN_ON(!socfpga_clk)) + return; + + rc = of_property_read_u32_array(node, "clk-gate", clk_gate, 2); + if (rc) + clk_gate[0] = 0; + + if (clk_gate[0]) { + socfpga_clk->hw.reg = clk_mgr_base_addr + clk_gate[0]; + socfpga_clk->hw.bit_idx = clk_gate[1]; + + gateclk_ops.enable = clk_gate_ops.enable; + gateclk_ops.disable = clk_gate_ops.disable; + } + + rc = of_property_read_u32(node, "fixed-divider", &fixed_div); + if (rc) + socfpga_clk->fixed_div = 0; + else + socfpga_clk->fixed_div = fixed_div; + + rc = of_property_read_u32_array(node, "div-reg", div_reg, 3); + if (!rc) { + socfpga_clk->div_reg = clk_mgr_base_addr + div_reg[0]; + socfpga_clk->shift = div_reg[1]; + socfpga_clk->width = div_reg[2]; + } else { + socfpga_clk->div_reg = 0; + } + + of_property_read_string(node, "clock-output-names", &clk_name); + + init.name = clk_name; + init.ops = ops; + init.flags = 0; + while (i < SOCFGPA_MAX_PARENTS && (parent_name[i] = + of_clk_get_parent_name(node, i)) != NULL) + i++; + + init.parent_names = parent_name; + init.num_parents = i; + socfpga_clk->hw.hw.init = &init; + + clk = clk_register(NULL, &socfpga_clk->hw.hw); + if (WARN_ON(IS_ERR(clk))) { + kfree(socfpga_clk); + return; + } + rc = of_clk_add_provider(node, of_clk_src_simple_get, clk); + if (WARN_ON(rc)) + return; +} + static void __init socfpga_pll_init(struct device_node *node) { socfpga_clk_init(node, &clk_pll_ops); @@ -160,6 +330,12 @@ static void __init socfpga_periph_init(struct device_node *node) } CLK_OF_DECLARE(socfpga_periph, "altr,socfpga-perip-clk", socfpga_periph_init); +static void __init socfpga_gate_init(struct device_node *node) +{ + socfpga_gate_clk_init(node, &gateclk_ops); +} +CLK_OF_DECLARE(socfpga_gate, "altr,socfpga-gate-clk", socfpga_gate_init); + void __init socfpga_init_clocks(void) { struct clk *clk; diff --git a/drivers/clk/tegra/clk-tegra114.c b/drivers/clk/tegra/clk-tegra114.c index d78e16e..40d939d 100644 --- a/drivers/clk/tegra/clk-tegra114.c +++ b/drivers/clk/tegra/clk-tegra114.c @@ -250,6 +250,9 @@ #define CLK_SOURCE_XUSB_DEV_SRC 0x60c #define CLK_SOURCE_EMC 0x19c +/* Tegra CPU clock and reset control regs */ +#define CLK_RST_CONTROLLER_CPU_CMPLX_STATUS 0x470 + static int periph_clk_enb_refcnt[CLK_OUT_ENB_NUM * 32]; static void __iomem *clk_base; @@ -2000,7 +2003,25 @@ static __init void tegra114_periph_clk_init(void __iomem *clk_base) } } -static struct tegra_cpu_car_ops tegra114_cpu_car_ops; +/* Tegra114 CPU clock and reset control functions */ +static void tegra114_wait_cpu_in_reset(u32 cpu) +{ + unsigned int reg; + + do { + reg = readl(clk_base + CLK_RST_CONTROLLER_CPU_CMPLX_STATUS); + cpu_relax(); + } while (!(reg & (1 << cpu))); /* check CPU been reset or not */ +} +static void tegra114_disable_cpu_clock(u32 cpu) +{ + /* flow controller would take care in the power sequence. */ +} + +static struct tegra_cpu_car_ops tegra114_cpu_car_ops = { + .wait_for_reset = tegra114_wait_cpu_in_reset, + .disable_clock = tegra114_disable_cpu_clock, +}; static const struct of_device_id pmc_match[] __initconst = { { .compatible = "nvidia,tegra114-pmc" }, diff --git a/drivers/clk/zynq/Makefile b/drivers/clk/zynq/Makefile new file mode 100644 index 0000000..156d923 --- /dev/null +++ b/drivers/clk/zynq/Makefile @@ -0,0 +1,3 @@ +# Zynq clock specific Makefile + +obj-$(CONFIG_ARCH_ZYNQ) += clkc.o pll.o diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c new file mode 100644 index 0000000..5c205b6 --- /dev/null +++ b/drivers/clk/zynq/clkc.c @@ -0,0 +1,533 @@ +/* + * Zynq clock controller + * + * Copyright (C) 2012 - 2013 Xilinx + * + * Sören Brinkmann <soren.brinkmann@xilinx.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/clk/zynq.h> +#include <linux/clk-provider.h> +#include <linux/of.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/io.h> + +static void __iomem *zynq_slcr_base_priv; + +#define SLCR_ARMPLL_CTRL (zynq_slcr_base_priv + 0x100) +#define SLCR_DDRPLL_CTRL (zynq_slcr_base_priv + 0x104) +#define SLCR_IOPLL_CTRL (zynq_slcr_base_priv + 0x108) +#define SLCR_PLL_STATUS (zynq_slcr_base_priv + 0x10c) +#define SLCR_ARM_CLK_CTRL (zynq_slcr_base_priv + 0x120) +#define SLCR_DDR_CLK_CTRL (zynq_slcr_base_priv + 0x124) +#define SLCR_DCI_CLK_CTRL (zynq_slcr_base_priv + 0x128) +#define SLCR_APER_CLK_CTRL (zynq_slcr_base_priv + 0x12c) +#define SLCR_GEM0_CLK_CTRL (zynq_slcr_base_priv + 0x140) +#define SLCR_GEM1_CLK_CTRL (zynq_slcr_base_priv + 0x144) +#define SLCR_SMC_CLK_CTRL (zynq_slcr_base_priv + 0x148) +#define SLCR_LQSPI_CLK_CTRL (zynq_slcr_base_priv + 0x14c) +#define SLCR_SDIO_CLK_CTRL (zynq_slcr_base_priv + 0x150) +#define SLCR_UART_CLK_CTRL (zynq_slcr_base_priv + 0x154) +#define SLCR_SPI_CLK_CTRL (zynq_slcr_base_priv + 0x158) +#define SLCR_CAN_CLK_CTRL (zynq_slcr_base_priv + 0x15c) +#define SLCR_CAN_MIOCLK_CTRL (zynq_slcr_base_priv + 0x160) +#define SLCR_DBG_CLK_CTRL (zynq_slcr_base_priv + 0x164) +#define SLCR_PCAP_CLK_CTRL (zynq_slcr_base_priv + 0x168) +#define SLCR_FPGA0_CLK_CTRL (zynq_slcr_base_priv + 0x170) +#define SLCR_621_TRUE (zynq_slcr_base_priv + 0x1c4) +#define SLCR_SWDT_CLK_SEL (zynq_slcr_base_priv + 0x304) + +#define NUM_MIO_PINS 54 + +enum zynq_clk { + armpll, ddrpll, iopll, + cpu_6or4x, cpu_3or2x, cpu_2x, cpu_1x, + ddr2x, ddr3x, dci, + lqspi, smc, pcap, gem0, gem1, fclk0, fclk1, fclk2, fclk3, can0, can1, + sdio0, sdio1, uart0, uart1, spi0, spi1, dma, + usb0_aper, usb1_aper, gem0_aper, gem1_aper, + sdio0_aper, sdio1_aper, spi0_aper, spi1_aper, can0_aper, can1_aper, + i2c0_aper, i2c1_aper, uart0_aper, uart1_aper, gpio_aper, lqspi_aper, + smc_aper, swdt, dbg_trc, dbg_apb, clk_max}; + +static struct clk *ps_clk; +static struct clk *clks[clk_max]; +static struct clk_onecell_data clk_data; + +static DEFINE_SPINLOCK(armpll_lock); +static DEFINE_SPINLOCK(ddrpll_lock); +static DEFINE_SPINLOCK(iopll_lock); +static DEFINE_SPINLOCK(armclk_lock); +static DEFINE_SPINLOCK(ddrclk_lock); +static DEFINE_SPINLOCK(dciclk_lock); +static DEFINE_SPINLOCK(gem0clk_lock); +static DEFINE_SPINLOCK(gem1clk_lock); +static DEFINE_SPINLOCK(canclk_lock); +static DEFINE_SPINLOCK(canmioclk_lock); +static DEFINE_SPINLOCK(dbgclk_lock); +static DEFINE_SPINLOCK(aperclk_lock); + +static const char dummy_nm[] __initconst = "dummy_name"; + +static const char *armpll_parents[] __initdata = {"armpll_int", "ps_clk"}; +static const char *ddrpll_parents[] __initdata = {"ddrpll_int", "ps_clk"}; +static const char *iopll_parents[] __initdata = {"iopll_int", "ps_clk"}; +static const char *gem0_mux_parents[] __initdata = {"gem0_div1", dummy_nm}; +static const char *gem1_mux_parents[] __initdata = {"gem1_div1", dummy_nm}; +static const char *can0_mio_mux2_parents[] __initdata = {"can0_gate", + "can0_mio_mux"}; +static const char *can1_mio_mux2_parents[] __initdata = {"can1_gate", + "can1_mio_mux"}; +static const char *dbg_emio_mux_parents[] __initdata = {"dbg_div", + dummy_nm}; + +static const char *dbgtrc_emio_input_names[] __initdata = {"trace_emio_clk"}; +static const char *gem0_emio_input_names[] __initdata = {"gem0_emio_clk"}; +static const char *gem1_emio_input_names[] __initdata = {"gem1_emio_clk"}; +static const char *swdt_ext_clk_input_names[] __initdata = {"swdt_ext_clk"}; + +static void __init zynq_clk_register_fclk(enum zynq_clk fclk, + const char *clk_name, void __iomem *fclk_ctrl_reg, + const char **parents) +{ + struct clk *clk; + char *mux_name; + char *div0_name; + char *div1_name; + spinlock_t *fclk_lock; + spinlock_t *fclk_gate_lock; + void __iomem *fclk_gate_reg = fclk_ctrl_reg + 8; + + fclk_lock = kmalloc(sizeof(*fclk_lock), GFP_KERNEL); + if (!fclk_lock) + goto err; + fclk_gate_lock = kmalloc(sizeof(*fclk_gate_lock), GFP_KERNEL); + if (!fclk_gate_lock) + goto err; + spin_lock_init(fclk_lock); + spin_lock_init(fclk_gate_lock); + + mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name); + div0_name = kasprintf(GFP_KERNEL, "%s_div0", clk_name); + div1_name = kasprintf(GFP_KERNEL, "%s_div1", clk_name); + + clk = clk_register_mux(NULL, mux_name, parents, 4, 0, + fclk_ctrl_reg, 4, 2, 0, fclk_lock); + + clk = clk_register_divider(NULL, div0_name, mux_name, + 0, fclk_ctrl_reg, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, fclk_lock); + + clk = clk_register_divider(NULL, div1_name, div0_name, + CLK_SET_RATE_PARENT, fclk_ctrl_reg, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + fclk_lock); + + clks[fclk] = clk_register_gate(NULL, clk_name, + div1_name, CLK_SET_RATE_PARENT, fclk_gate_reg, + 0, CLK_GATE_SET_TO_DISABLE, fclk_gate_lock); + kfree(mux_name); + kfree(div0_name); + kfree(div1_name); + + return; + +err: + clks[fclk] = ERR_PTR(-ENOMEM); +} + +static void __init zynq_clk_register_periph_clk(enum zynq_clk clk0, + enum zynq_clk clk1, const char *clk_name0, + const char *clk_name1, void __iomem *clk_ctrl, + const char **parents, unsigned int two_gates) +{ + struct clk *clk; + char *mux_name; + char *div_name; + spinlock_t *lock; + + lock = kmalloc(sizeof(*lock), GFP_KERNEL); + if (!lock) + goto err; + spin_lock_init(lock); + + mux_name = kasprintf(GFP_KERNEL, "%s_mux", clk_name0); + div_name = kasprintf(GFP_KERNEL, "%s_div", clk_name0); + + clk = clk_register_mux(NULL, mux_name, parents, 4, 0, + clk_ctrl, 4, 2, 0, lock); + + clk = clk_register_divider(NULL, div_name, mux_name, 0, clk_ctrl, 8, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, lock); + + clks[clk0] = clk_register_gate(NULL, clk_name0, div_name, + CLK_SET_RATE_PARENT, clk_ctrl, 0, 0, lock); + if (two_gates) + clks[clk1] = clk_register_gate(NULL, clk_name1, div_name, + CLK_SET_RATE_PARENT, clk_ctrl, 1, 0, lock); + + kfree(mux_name); + kfree(div_name); + + return; + +err: + clks[clk0] = ERR_PTR(-ENOMEM); + if (two_gates) + clks[clk1] = ERR_PTR(-ENOMEM); +} + +static void __init zynq_clk_setup(struct device_node *np) +{ + int i; + u32 tmp; + int ret; + struct clk *clk; + char *clk_name; + const char *clk_output_name[clk_max]; + const char *cpu_parents[4]; + const char *periph_parents[4]; + const char *swdt_ext_clk_mux_parents[2]; + const char *can_mio_mux_parents[NUM_MIO_PINS]; + + pr_info("Zynq clock init\n"); + + /* get clock output names from DT */ + for (i = 0; i < clk_max; i++) { + if (of_property_read_string_index(np, "clock-output-names", + i, &clk_output_name[i])) { + pr_err("%s: clock output name not in DT\n", __func__); + BUG(); + } + } + cpu_parents[0] = clk_output_name[armpll]; + cpu_parents[1] = clk_output_name[armpll]; + cpu_parents[2] = clk_output_name[ddrpll]; + cpu_parents[3] = clk_output_name[iopll]; + periph_parents[0] = clk_output_name[iopll]; + periph_parents[1] = clk_output_name[iopll]; + periph_parents[2] = clk_output_name[armpll]; + periph_parents[3] = clk_output_name[ddrpll]; + + /* ps_clk */ + ret = of_property_read_u32(np, "ps-clk-frequency", &tmp); + if (ret) { + pr_warn("ps_clk frequency not specified, using 33 MHz.\n"); + tmp = 33333333; + } + ps_clk = clk_register_fixed_rate(NULL, "ps_clk", NULL, CLK_IS_ROOT, + tmp); + + /* PLLs */ + clk = clk_register_zynq_pll("armpll_int", "ps_clk", SLCR_ARMPLL_CTRL, + SLCR_PLL_STATUS, 0, &armpll_lock); + clks[armpll] = clk_register_mux(NULL, clk_output_name[armpll], + armpll_parents, 2, 0, SLCR_ARMPLL_CTRL, 4, 1, 0, + &armpll_lock); + + clk = clk_register_zynq_pll("ddrpll_int", "ps_clk", SLCR_DDRPLL_CTRL, + SLCR_PLL_STATUS, 1, &ddrpll_lock); + clks[ddrpll] = clk_register_mux(NULL, clk_output_name[ddrpll], + ddrpll_parents, 2, 0, SLCR_DDRPLL_CTRL, 4, 1, 0, + &ddrpll_lock); + + clk = clk_register_zynq_pll("iopll_int", "ps_clk", SLCR_IOPLL_CTRL, + SLCR_PLL_STATUS, 2, &iopll_lock); + clks[iopll] = clk_register_mux(NULL, clk_output_name[iopll], + iopll_parents, 2, 0, SLCR_IOPLL_CTRL, 4, 1, 0, + &iopll_lock); + + /* CPU clocks */ + tmp = readl(SLCR_621_TRUE) & 1; + clk = clk_register_mux(NULL, "cpu_mux", cpu_parents, 4, 0, + SLCR_ARM_CLK_CTRL, 4, 2, 0, &armclk_lock); + clk = clk_register_divider(NULL, "cpu_div", "cpu_mux", 0, + SLCR_ARM_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &armclk_lock); + + clks[cpu_6or4x] = clk_register_gate(NULL, clk_output_name[cpu_6or4x], + "cpu_div", CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED, + SLCR_ARM_CLK_CTRL, 24, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_3or2x_div", "cpu_div", 0, + 1, 2); + clks[cpu_3or2x] = clk_register_gate(NULL, clk_output_name[cpu_3or2x], + "cpu_3or2x_div", CLK_IGNORE_UNUSED, + SLCR_ARM_CLK_CTRL, 25, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_2x_div", "cpu_div", 0, 1, + 2 + tmp); + clks[cpu_2x] = clk_register_gate(NULL, clk_output_name[cpu_2x], + "cpu_2x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, + 26, 0, &armclk_lock); + + clk = clk_register_fixed_factor(NULL, "cpu_1x_div", "cpu_div", 0, 1, + 4 + 2 * tmp); + clks[cpu_1x] = clk_register_gate(NULL, clk_output_name[cpu_1x], + "cpu_1x_div", CLK_IGNORE_UNUSED, SLCR_ARM_CLK_CTRL, 27, + 0, &armclk_lock); + + /* Timers */ + swdt_ext_clk_mux_parents[0] = clk_output_name[cpu_1x]; + for (i = 0; i < ARRAY_SIZE(swdt_ext_clk_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + swdt_ext_clk_input_names[i]); + if (idx >= 0) + swdt_ext_clk_mux_parents[i + 1] = + of_clk_get_parent_name(np, idx); + else + swdt_ext_clk_mux_parents[i + 1] = dummy_nm; + } + clks[swdt] = clk_register_mux(NULL, clk_output_name[swdt], + swdt_ext_clk_mux_parents, 2, CLK_SET_RATE_PARENT, + SLCR_SWDT_CLK_SEL, 0, 1, 0, &gem0clk_lock); + + /* DDR clocks */ + clk = clk_register_divider(NULL, "ddr2x_div", "ddrpll", 0, + SLCR_DDR_CLK_CTRL, 26, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); + clks[ddr2x] = clk_register_gate(NULL, clk_output_name[ddr2x], + "ddr2x_div", 0, SLCR_DDR_CLK_CTRL, 1, 0, &ddrclk_lock); + clk_prepare_enable(clks[ddr2x]); + clk = clk_register_divider(NULL, "ddr3x_div", "ddrpll", 0, + SLCR_DDR_CLK_CTRL, 20, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &ddrclk_lock); + clks[ddr3x] = clk_register_gate(NULL, clk_output_name[ddr3x], + "ddr3x_div", 0, SLCR_DDR_CLK_CTRL, 0, 0, &ddrclk_lock); + clk_prepare_enable(clks[ddr3x]); + + clk = clk_register_divider(NULL, "dci_div0", "ddrpll", 0, + SLCR_DCI_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &dciclk_lock); + clk = clk_register_divider(NULL, "dci_div1", "dci_div0", + CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &dciclk_lock); + clks[dci] = clk_register_gate(NULL, clk_output_name[dci], "dci_div1", + CLK_SET_RATE_PARENT, SLCR_DCI_CLK_CTRL, 0, 0, + &dciclk_lock); + clk_prepare_enable(clks[dci]); + + /* Peripheral clocks */ + for (i = fclk0; i <= fclk3; i++) + zynq_clk_register_fclk(i, clk_output_name[i], + SLCR_FPGA0_CLK_CTRL + 0x10 * (i - fclk0), + periph_parents); + + zynq_clk_register_periph_clk(lqspi, 0, clk_output_name[lqspi], NULL, + SLCR_LQSPI_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(smc, 0, clk_output_name[smc], NULL, + SLCR_SMC_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(pcap, 0, clk_output_name[pcap], NULL, + SLCR_PCAP_CLK_CTRL, periph_parents, 0); + + zynq_clk_register_periph_clk(sdio0, sdio1, clk_output_name[sdio0], + clk_output_name[sdio1], SLCR_SDIO_CLK_CTRL, + periph_parents, 1); + + zynq_clk_register_periph_clk(uart0, uart1, clk_output_name[uart0], + clk_output_name[uart1], SLCR_UART_CLK_CTRL, + periph_parents, 1); + + zynq_clk_register_periph_clk(spi0, spi1, clk_output_name[spi0], + clk_output_name[spi1], SLCR_SPI_CLK_CTRL, + periph_parents, 1); + + for (i = 0; i < ARRAY_SIZE(gem0_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + gem0_emio_input_names[i]); + if (idx >= 0) + gem0_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "gem0_mux", periph_parents, 4, 0, + SLCR_GEM0_CLK_CTRL, 4, 2, 0, &gem0clk_lock); + clk = clk_register_divider(NULL, "gem0_div0", "gem0_mux", 0, + SLCR_GEM0_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &gem0clk_lock); + clk = clk_register_divider(NULL, "gem0_div1", "gem0_div0", + CLK_SET_RATE_PARENT, SLCR_GEM0_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &gem0clk_lock); + clk = clk_register_mux(NULL, "gem0_emio_mux", gem0_mux_parents, 2, 0, + SLCR_GEM0_CLK_CTRL, 6, 1, 0, &gem0clk_lock); + clks[gem0] = clk_register_gate(NULL, clk_output_name[gem0], + "gem0_emio_mux", CLK_SET_RATE_PARENT, + SLCR_GEM0_CLK_CTRL, 0, 0, &gem0clk_lock); + + for (i = 0; i < ARRAY_SIZE(gem1_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + gem1_emio_input_names[i]); + if (idx >= 0) + gem1_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "gem1_mux", periph_parents, 4, 0, + SLCR_GEM1_CLK_CTRL, 4, 2, 0, &gem1clk_lock); + clk = clk_register_divider(NULL, "gem1_div0", "gem1_mux", 0, + SLCR_GEM1_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &gem1clk_lock); + clk = clk_register_divider(NULL, "gem1_div1", "gem1_div0", + CLK_SET_RATE_PARENT, SLCR_GEM1_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &gem1clk_lock); + clk = clk_register_mux(NULL, "gem1_emio_mux", gem1_mux_parents, 2, 0, + SLCR_GEM1_CLK_CTRL, 6, 1, 0, &gem1clk_lock); + clks[gem1] = clk_register_gate(NULL, clk_output_name[gem1], + "gem1_emio_mux", CLK_SET_RATE_PARENT, + SLCR_GEM1_CLK_CTRL, 0, 0, &gem1clk_lock); + + tmp = strlen("mio_clk_00x"); + clk_name = kmalloc(tmp, GFP_KERNEL); + for (i = 0; i < NUM_MIO_PINS; i++) { + int idx; + + snprintf(clk_name, tmp, "mio_clk_%2.2d", i); + idx = of_property_match_string(np, "clock-names", clk_name); + if (idx >= 0) + can_mio_mux_parents[i] = of_clk_get_parent_name(np, + idx); + else + can_mio_mux_parents[i] = dummy_nm; + } + kfree(clk_name); + clk = clk_register_mux(NULL, "can_mux", periph_parents, 4, 0, + SLCR_CAN_CLK_CTRL, 4, 2, 0, &canclk_lock); + clk = clk_register_divider(NULL, "can_div0", "can_mux", 0, + SLCR_CAN_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &canclk_lock); + clk = clk_register_divider(NULL, "can_div1", "can_div0", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 20, 6, + CLK_DIVIDER_ONE_BASED | CLK_DIVIDER_ALLOW_ZERO, + &canclk_lock); + clk = clk_register_gate(NULL, "can0_gate", "can_div1", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 0, 0, + &canclk_lock); + clk = clk_register_gate(NULL, "can1_gate", "can_div1", + CLK_SET_RATE_PARENT, SLCR_CAN_CLK_CTRL, 1, 0, + &canclk_lock); + clk = clk_register_mux(NULL, "can0_mio_mux", + can_mio_mux_parents, 54, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 0, 6, 0, &canmioclk_lock); + clk = clk_register_mux(NULL, "can1_mio_mux", + can_mio_mux_parents, 54, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 16, 6, 0, &canmioclk_lock); + clks[can0] = clk_register_mux(NULL, clk_output_name[can0], + can0_mio_mux2_parents, 2, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 6, 1, 0, &canmioclk_lock); + clks[can1] = clk_register_mux(NULL, clk_output_name[can1], + can1_mio_mux2_parents, 2, CLK_SET_RATE_PARENT, + SLCR_CAN_MIOCLK_CTRL, 22, 1, 0, &canmioclk_lock); + + for (i = 0; i < ARRAY_SIZE(dbgtrc_emio_input_names); i++) { + int idx = of_property_match_string(np, "clock-names", + dbgtrc_emio_input_names[i]); + if (idx >= 0) + dbg_emio_mux_parents[i + 1] = of_clk_get_parent_name(np, + idx); + } + clk = clk_register_mux(NULL, "dbg_mux", periph_parents, 4, 0, + SLCR_DBG_CLK_CTRL, 4, 2, 0, &dbgclk_lock); + clk = clk_register_divider(NULL, "dbg_div", "dbg_mux", 0, + SLCR_DBG_CLK_CTRL, 8, 6, CLK_DIVIDER_ONE_BASED | + CLK_DIVIDER_ALLOW_ZERO, &dbgclk_lock); + clk = clk_register_mux(NULL, "dbg_emio_mux", dbg_emio_mux_parents, 2, 0, + SLCR_DBG_CLK_CTRL, 6, 1, 0, &dbgclk_lock); + clks[dbg_trc] = clk_register_gate(NULL, clk_output_name[dbg_trc], + "dbg_emio_mux", CLK_SET_RATE_PARENT, SLCR_DBG_CLK_CTRL, + 0, 0, &dbgclk_lock); + clks[dbg_apb] = clk_register_gate(NULL, clk_output_name[dbg_apb], + clk_output_name[cpu_1x], 0, SLCR_DBG_CLK_CTRL, 1, 0, + &dbgclk_lock); + + /* One gated clock for all APER clocks. */ + clks[dma] = clk_register_gate(NULL, clk_output_name[dma], + clk_output_name[cpu_2x], 0, SLCR_APER_CLK_CTRL, 0, 0, + &aperclk_lock); + clks[usb0_aper] = clk_register_gate(NULL, clk_output_name[usb0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 2, 0, + &aperclk_lock); + clks[usb1_aper] = clk_register_gate(NULL, clk_output_name[usb1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 3, 0, + &aperclk_lock); + clks[gem0_aper] = clk_register_gate(NULL, clk_output_name[gem0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 6, 0, + &aperclk_lock); + clks[gem1_aper] = clk_register_gate(NULL, clk_output_name[gem1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 7, 0, + &aperclk_lock); + clks[sdio0_aper] = clk_register_gate(NULL, clk_output_name[sdio0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 10, 0, + &aperclk_lock); + clks[sdio1_aper] = clk_register_gate(NULL, clk_output_name[sdio1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 11, 0, + &aperclk_lock); + clks[spi0_aper] = clk_register_gate(NULL, clk_output_name[spi0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 14, 0, + &aperclk_lock); + clks[spi1_aper] = clk_register_gate(NULL, clk_output_name[spi1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 15, 0, + &aperclk_lock); + clks[can0_aper] = clk_register_gate(NULL, clk_output_name[can0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 16, 0, + &aperclk_lock); + clks[can1_aper] = clk_register_gate(NULL, clk_output_name[can1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 17, 0, + &aperclk_lock); + clks[i2c0_aper] = clk_register_gate(NULL, clk_output_name[i2c0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 18, 0, + &aperclk_lock); + clks[i2c1_aper] = clk_register_gate(NULL, clk_output_name[i2c1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 19, 0, + &aperclk_lock); + clks[uart0_aper] = clk_register_gate(NULL, clk_output_name[uart0_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 20, 0, + &aperclk_lock); + clks[uart1_aper] = clk_register_gate(NULL, clk_output_name[uart1_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 21, 0, + &aperclk_lock); + clks[gpio_aper] = clk_register_gate(NULL, clk_output_name[gpio_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 22, 0, + &aperclk_lock); + clks[lqspi_aper] = clk_register_gate(NULL, clk_output_name[lqspi_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 23, 0, + &aperclk_lock); + clks[smc_aper] = clk_register_gate(NULL, clk_output_name[smc_aper], + clk_output_name[cpu_1x], 0, SLCR_APER_CLK_CTRL, 24, 0, + &aperclk_lock); + + for (i = 0; i < ARRAY_SIZE(clks); i++) { + if (IS_ERR(clks[i])) { + pr_err("Zynq clk %d: register failed with %ld\n", + i, PTR_ERR(clks[i])); + BUG(); + } + } + + clk_data.clks = clks; + clk_data.clk_num = ARRAY_SIZE(clks); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); +} + +CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup); + +void __init zynq_clock_init(void __iomem *slcr_base) +{ + zynq_slcr_base_priv = slcr_base; + of_clk_init(NULL); +} diff --git a/drivers/clk/zynq/pll.c b/drivers/clk/zynq/pll.c new file mode 100644 index 0000000..47e307c --- /dev/null +++ b/drivers/clk/zynq/pll.c @@ -0,0 +1,235 @@ +/* + * Zynq PLL driver + * + * Copyright (C) 2013 Xilinx + * + * Sören Brinkmann <soren.brinkmann@xilinx.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License v2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + */ +#include <linux/clk/zynq.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> +#include <linux/io.h> + +/** + * struct zynq_pll + * @hw: Handle between common and hardware-specific interfaces + * @pll_ctrl: PLL control register + * @pll_status: PLL status register + * @lock: Register lock + * @lockbit: Indicates the associated PLL_LOCKED bit in the PLL status + * register. + */ +struct zynq_pll { + struct clk_hw hw; + void __iomem *pll_ctrl; + void __iomem *pll_status; + spinlock_t *lock; + u8 lockbit; +}; +#define to_zynq_pll(_hw) container_of(_hw, struct zynq_pll, hw) + +/* Register bitfield defines */ +#define PLLCTRL_FBDIV_MASK 0x7f000 +#define PLLCTRL_FBDIV_SHIFT 12 +#define PLLCTRL_BPQUAL_MASK (1 << 3) +#define PLLCTRL_PWRDWN_MASK 2 +#define PLLCTRL_PWRDWN_SHIFT 1 +#define PLLCTRL_RESET_MASK 1 +#define PLLCTRL_RESET_SHIFT 0 + +/** + * zynq_pll_round_rate() - Round a clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @rate: Desired clock frequency + * @prate: Clock frequency of parent clock + * Returns frequency closest to @rate the hardware can generate. + */ +static long zynq_pll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + u32 fbdiv; + + fbdiv = DIV_ROUND_CLOSEST(rate, *prate); + if (fbdiv < 13) + fbdiv = 13; + else if (fbdiv > 66) + fbdiv = 66; + + return *prate * fbdiv; +} + +/** + * zynq_pll_recalc_rate() - Recalculate clock frequency + * @hw: Handle between common and hardware-specific interfaces + * @parent_rate: Clock frequency of parent clock + * Returns current clock frequency. + */ +static unsigned long zynq_pll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct zynq_pll *clk = to_zynq_pll(hw); + u32 fbdiv; + + /* + * makes probably sense to redundantly save fbdiv in the struct + * zynq_pll to save the IO access. + */ + fbdiv = (readl(clk->pll_ctrl) & PLLCTRL_FBDIV_MASK) >> + PLLCTRL_FBDIV_SHIFT; + + return parent_rate * fbdiv; +} + +/** + * zynq_pll_is_enabled - Check if a clock is enabled + * @hw: Handle between common and hardware-specific interfaces + * Returns 1 if the clock is enabled, 0 otherwise. + * + * Not sure this is a good idea, but since disabled means bypassed for + * this clock implementation we say we are always enabled. + */ +static int zynq_pll_is_enabled(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + + spin_unlock_irqrestore(clk->lock, flags); + + return !(reg & (PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK)); +} + +/** + * zynq_pll_enable - Enable clock + * @hw: Handle between common and hardware-specific interfaces + * Returns 0 on success + */ +static int zynq_pll_enable(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + if (zynq_pll_is_enabled(hw)) + return 0; + + pr_info("PLL: enable\n"); + + /* Power up PLL and wait for lock */ + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + reg &= ~(PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK); + writel(reg, clk->pll_ctrl); + while (!(readl(clk->pll_status) & (1 << clk->lockbit))) + ; + + spin_unlock_irqrestore(clk->lock, flags); + + return 0; +} + +/** + * zynq_pll_disable - Disable clock + * @hw: Handle between common and hardware-specific interfaces + * Returns 0 on success + */ +static void zynq_pll_disable(struct clk_hw *hw) +{ + unsigned long flags = 0; + u32 reg; + struct zynq_pll *clk = to_zynq_pll(hw); + + if (!zynq_pll_is_enabled(hw)) + return; + + pr_info("PLL: shutdown\n"); + + /* shut down PLL */ + spin_lock_irqsave(clk->lock, flags); + + reg = readl(clk->pll_ctrl); + reg |= PLLCTRL_RESET_MASK | PLLCTRL_PWRDWN_MASK; + writel(reg, clk->pll_ctrl); + + spin_unlock_irqrestore(clk->lock, flags); +} + +static const struct clk_ops zynq_pll_ops = { + .enable = zynq_pll_enable, + .disable = zynq_pll_disable, + .is_enabled = zynq_pll_is_enabled, + .round_rate = zynq_pll_round_rate, + .recalc_rate = zynq_pll_recalc_rate +}; + +/** + * clk_register_zynq_pll() - Register PLL with the clock framework + * @np Pointer to the DT device node + */ +struct clk *clk_register_zynq_pll(const char *name, const char *parent, + void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index, + spinlock_t *lock) +{ + struct zynq_pll *pll; + struct clk *clk; + u32 reg; + const char *parent_arr[1] = {parent}; + unsigned long flags = 0; + struct clk_init_data initd = { + .name = name, + .parent_names = parent_arr, + .ops = &zynq_pll_ops, + .num_parents = 1, + .flags = 0 + }; + + pll = kmalloc(sizeof(*pll), GFP_KERNEL); + if (!pll) { + pr_err("%s: Could not allocate Zynq PLL clk.\n", __func__); + return ERR_PTR(-ENOMEM); + } + + /* Populate the struct */ + pll->hw.init = &initd; + pll->pll_ctrl = pll_ctrl; + pll->pll_status = pll_status; + pll->lockbit = lock_index; + pll->lock = lock; + + spin_lock_irqsave(pll->lock, flags); + + reg = readl(pll->pll_ctrl); + reg &= ~PLLCTRL_BPQUAL_MASK; + writel(reg, pll->pll_ctrl); + + spin_unlock_irqrestore(pll->lock, flags); + + clk = clk_register(NULL, &pll->hw); + if (WARN_ON(IS_ERR(clk))) + goto free_pll; + + return clk; + +free_pll: + kfree(pll); + + return clk; +} |