Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver specific changes from Arnd Bergmann:

 - Updates to the ux500 cpufreq code

 - Moving the u300 DMA controller driver to drivers/dma

 - Moving versatile express drivers out of arch/arm for sharing with arch/arm64

 - Device tree bindings for the OMAP General Purpose Memory Controller

* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (27 commits)
  ARM: OMAP2+: gpmc: Add device tree documentation for elm handle
  ARM: OMAP2+: gpmc: add DT bindings for OneNAND
  ARM: OMAP2+: gpmc-onenand: drop __init annotation
  mtd: omap-onenand: pass device_node in platform data
  ARM: OMAP2+: Prevent potential crash if GPMC probe fails
  ARM: OMAP2+: gpmc: Remove unneeded of_node_put()
  arm: Move sp810.h to include/linux/amba/
  ARM: OMAP: gpmc: add DT bindings for GPMC timings and NAND
  ARM: OMAP: gpmc: enable hwecc for AM33xx SoCs
  ARM: OMAP: gpmc-nand: drop __init annotation
  mtd: omap-nand: pass device_node in platform data
  ARM: OMAP: gpmc: don't create devices from initcall on DT
  dma: coh901318: cut down on platform data abstraction
  dma: coh901318: merge header files
  dma: coh901318: push definitions into driver
  dma: coh901318: push header down into the DMA subsystem
  dma: coh901318: skip hard-coded addresses
  dma: coh901318: remove hardcoded target addresses
  dma: coh901318: push platform data into driver
  dma: coh901318: create a proper platform data file
  ...

2 files changed, 52 insertions, 51 deletions

diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 5399c45..863fd18 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -44,7 +44,7 @@ obj-$(CONFIG_X86_INTEL_PSTATE)		+= intel_pstate.o
 
 ##################################################################################
 # ARM SoC drivers
-obj-$(CONFIG_UX500_SOC_DB8500)		+= db8500-cpufreq.o
+obj-$(CONFIG_UX500_SOC_DB8500)		+= dbx500-cpufreq.o
 obj-$(CONFIG_ARM_S3C2416_CPUFREQ)	+= s3c2416-cpufreq.o
 obj-$(CONFIG_ARM_S3C64XX_CPUFREQ)	+= s3c64xx-cpufreq.o
 obj-$(CONFIG_ARM_S5PV210_CPUFREQ)	+= s5pv210-cpufreq.o
diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/dbx500-cpufreq.c
index 48a1988..72f0c3e 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/dbx500-cpufreq.c
@@ -1,13 +1,13 @@
 /*
  * Copyright (C) STMicroelectronics 2009
- * Copyright (C) ST-Ericsson SA 2010
+ * Copyright (C) ST-Ericsson SA 2010-2012
  *
  * License Terms: GNU General Public License v2
  * Author: Sundar Iyer <sundar.iyer@stericsson.com>
  * Author: Martin Persson <martin.persson@stericsson.com>
  * Author: Jonas Aaberg <jonas.aberg@stericsson.com>
- *
  */
+
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/cpufreq.h>
@@ -19,22 +19,23 @@
 static struct cpufreq_frequency_table *freq_table;
 static struct clk *armss_clk;
 
-static struct freq_attr *db8500_cpufreq_attr[] = {
+static struct freq_attr *dbx500_cpufreq_attr[] = {
 	&cpufreq_freq_attr_scaling_available_freqs,
 	NULL,
 };
 
-static int db8500_cpufreq_verify_speed(struct cpufreq_policy *policy)
+static int dbx500_cpufreq_verify_speed(struct cpufreq_policy *policy)
 {
 	return cpufreq_frequency_table_verify(policy, freq_table);
 }
 
-static int db8500_cpufreq_target(struct cpufreq_policy *policy,
+static int dbx500_cpufreq_target(struct cpufreq_policy *policy,
 				unsigned int target_freq,
 				unsigned int relation)
 {
 	struct cpufreq_freqs freqs;
 	unsigned int idx;
+	int ret;
 
 	/* scale the target frequency to one of the extremes supported */
 	if (target_freq < policy->cpuinfo.min_freq)
@@ -43,10 +44,9 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy,
 		target_freq = policy->cpuinfo.max_freq;
 
 	/* Lookup the next frequency */
-	if (cpufreq_frequency_table_target
-	    (policy, freq_table, target_freq, relation, &idx)) {
+	if (cpufreq_frequency_table_target(policy, freq_table, target_freq,
+					relation, &idx))
 		return -EINVAL;
-	}
 
 	freqs.old = policy->cur;
 	freqs.new = freq_table[idx].frequency;
@@ -59,9 +59,12 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy,
 		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* update armss clk frequency */
-	if (clk_set_rate(armss_clk, freq_table[idx].frequency * 1000)) {
-		pr_err("db8500-cpufreq: Failed to update armss clk\n");
-		return -EINVAL;
+	ret = clk_set_rate(armss_clk, freqs.new * 1000);
+
+	if (ret) {
+		pr_err("dbx500-cpufreq: Failed to set armss_clk to %d Hz: error %d\n",
+		       freqs.new * 1000, ret);
+		return ret;
 	}
 
 	/* post change notification */
@@ -71,7 +74,7 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy,
 	return 0;
 }
 
-static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
+static unsigned int dbx500_cpufreq_getspeed(unsigned int cpu)
 {
 	int i = 0;
 	unsigned long freq = clk_get_rate(armss_clk) / 1000;
@@ -83,40 +86,26 @@ static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
 	}
 
 	/* We could not find a corresponding frequency. */
-	pr_err("db8500-cpufreq: Failed to find cpufreq speed\n");
+	pr_err("dbx500-cpufreq: Failed to find cpufreq speed\n");
 	return 0;
 }
 
-static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
+static int __cpuinit dbx500_cpufreq_init(struct cpufreq_policy *policy)
 {
-	int i = 0;
 	int res;
 
-	armss_clk = clk_get(NULL, "armss");
-	if (IS_ERR(armss_clk)) {
-		pr_err("db8500-cpufreq : Failed to get armss clk\n");
-		return PTR_ERR(armss_clk);
-	}
-
-	pr_info("db8500-cpufreq : Available frequencies:\n");
-	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
-		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
-		i++;
-	}
-
 	/* get policy fields based on the table */
 	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
 	if (!res)
 		cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
 	else {
-		pr_err("db8500-cpufreq : Failed to read policy table\n");
-		clk_put(armss_clk);
+		pr_err("dbx500-cpufreq: Failed to read policy table\n");
 		return res;
 	}
 
 	policy->min = policy->cpuinfo.min_freq;
 	policy->max = policy->cpuinfo.max_freq;
-	policy->cur = db8500_cpufreq_getspeed(policy->cpu);
+	policy->cur = dbx500_cpufreq_getspeed(policy->cpu);
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 
 	/*
@@ -132,42 +121,54 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static struct cpufreq_driver db8500_cpufreq_driver = {
-	.flags  = CPUFREQ_STICKY,
-	.verify = db8500_cpufreq_verify_speed,
-	.target = db8500_cpufreq_target,
-	.get    = db8500_cpufreq_getspeed,
-	.init   = db8500_cpufreq_init,
-	.name   = "DB8500",
-	.attr   = db8500_cpufreq_attr,
+static struct cpufreq_driver dbx500_cpufreq_driver = {
+	.flags  = CPUFREQ_STICKY | CPUFREQ_CONST_LOOPS,
+	.verify = dbx500_cpufreq_verify_speed,
+	.target = dbx500_cpufreq_target,
+	.get    = dbx500_cpufreq_getspeed,
+	.init   = dbx500_cpufreq_init,
+	.name   = "DBX500",
+	.attr   = dbx500_cpufreq_attr,
 };
 
-static int db8500_cpufreq_probe(struct platform_device *pdev)
+static int dbx500_cpufreq_probe(struct platform_device *pdev)
 {
-	freq_table = dev_get_platdata(&pdev->dev);
+	int i = 0;
 
+	freq_table = dev_get_platdata(&pdev->dev);
 	if (!freq_table) {
-		pr_err("db8500-cpufreq: Failed to fetch cpufreq table\n");
+		pr_err("dbx500-cpufreq: Failed to fetch cpufreq table\n");
 		return -ENODEV;
 	}
 
-	return cpufreq_register_driver(&db8500_cpufreq_driver);
+	armss_clk = clk_get(&pdev->dev, "armss");
+	if (IS_ERR(armss_clk)) {
+		pr_err("dbx500-cpufreq: Failed to get armss clk\n");
+		return PTR_ERR(armss_clk);
+	}
+
+	pr_info("dbx500-cpufreq: Available frequencies:\n");
+	while (freq_table[i].frequency != CPUFREQ_TABLE_END) {
+		pr_info("  %d Mhz\n", freq_table[i].frequency/1000);
+		i++;
+	}
+
+	return cpufreq_register_driver(&dbx500_cpufreq_driver);
 }
 
-static struct platform_driver db8500_cpufreq_plat_driver = {
+static struct platform_driver dbx500_cpufreq_plat_driver = {
 	.driver = {
-		.name = "cpufreq-u8500",
+		.name = "cpufreq-ux500",
 		.owner = THIS_MODULE,
 	},
-	.probe = db8500_cpufreq_probe,
+	.probe = dbx500_cpufreq_probe,
 };
 
-static int __init db8500_cpufreq_register(void)
+static int __init dbx500_cpufreq_register(void)
 {
-	pr_info("cpufreq for DB8500 started\n");
-	return platform_driver_register(&db8500_cpufreq_plat_driver);
+	return platform_driver_register(&dbx500_cpufreq_plat_driver);
 }
-device_initcall(db8500_cpufreq_register);
+device_initcall(dbx500_cpufreq_register);
 
 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("cpufreq driver for DB8500");
+MODULE_DESCRIPTION("cpufreq driver for DBX500");