diff options
| author | Ruchika Gupta <ruchika.gupta@freescale.com> | 2014-06-23 12:12:33 (GMT) |
|---|---|---|
| committer | Matthew Weigel <Matthew.Weigel@freescale.com> | 2014-12-11 18:35:51 (GMT) |
| commit | b76dab79a99f90457acd9093a5e4ca664bae703b (patch) | |
| tree | facaa0feae3a6a27400a32d6096cea6e22d92843 /drivers/crypto/caam/ctrl.c | |
| parent | 49d7747598e26add4ce6e1b775eacce5a9b2115d (diff) | |
| download | linux-fsl-qoriq-b76dab79a99f90457acd9093a5e4ca664bae703b.tar.xz | |
crypto: caam - Configuration for platforms with virtualization enabled in CAAM
For platforms with virtualization enabled
1. The job ring registers can be written to only is the job ring has been
started i.e STARTR bit in JRSTART register is 1
2. For DECO's under direct software control, with virtualization enabled
PL, BMT, ICID and SDID values need to be provided. These are provided by
selecting a Job ring in start mode whose parameters would be used for the
DECO access programming.
Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
(cherry picked from commit 17157c90a8abf9323ee2a3daac7ad9f696642dda)
Conflicts:
drivers/crypto/caam/ctrl.c
drivers/crypto/caam/intern.h
Change-Id: I8adb64fd4ba06f1007ae6838ad4f5b3ecd04bdc9
Reviewed-on: http://git.am.freescale.net:8181/17734
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Reviewed-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Tested-by: Zhengxiong Jin <Jason.Jin@freescale.com>
Diffstat (limited to 'drivers/crypto/caam/ctrl.c')
| -rw-r--r-- | drivers/crypto/caam/ctrl.c | 39 |
1 files changed, 39 insertions, 0 deletions
diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c index 9157f7b..5599cf5 100644 --- a/drivers/crypto/caam/ctrl.c +++ b/drivers/crypto/caam/ctrl.c @@ -88,6 +88,14 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc, /* Set the bit to request direct access to DECO0 */ topregs = (struct caam_full __iomem *)ctrlpriv->ctrl; + + if (ctrlpriv->virt_en == 1) + setbits32(&topregs->ctrl.deco_rsr, DECORSR_JR0); + + while (!(rd_reg32(&topregs->ctrl.deco_rsr) & DECORSR_VALID) && + --timeout) + cpu_relax(); + setbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE); while (!(rd_reg32(&topregs->ctrl.deco_rq) & DECORR_DEN0) && @@ -130,6 +138,9 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc, *status = rd_reg32(&topregs->deco.op_status_hi) & DECO_OP_STATUS_HI_ERR_MASK; + if (ctrlpriv->virt_en == 1) + clrbits32(&topregs->ctrl.deco_rsr, DECORSR_JR0); + /* Mark the DECO as free */ clrbits32(&topregs->ctrl.deco_rq, DECORR_RQD0ENABLE); @@ -451,6 +462,7 @@ static int caam_probe(struct platform_device *pdev) #ifdef CONFIG_DEBUG_FS struct caam_perfmon *perfmon; #endif + u32 scfgr, comp_params; ctrlpriv = kzalloc(sizeof(struct caam_drv_private), GFP_KERNEL); if (!ctrlpriv) @@ -483,6 +495,33 @@ static int caam_probe(struct platform_device *pdev) setbits32(&topregs->ctrl.mcr, MCFGR_WDENABLE | (sizeof(dma_addr_t) == sizeof(u64) ? MCFGR_LONG_PTR : 0)); + /* + * Read the Compile Time paramters and SCFGR to determine + * if Virtualization is enabled for this platform + */ + comp_params = rd_reg32(&topregs->ctrl.perfmon.comp_parms_ms); + scfgr = rd_reg32(&topregs->ctrl.scfgr); + + ctrlpriv->virt_en = 0; + if (comp_params & CTPR_MS_VIRT_EN_INCL) { + /* VIRT_EN_INCL = 1 & VIRT_EN_POR = 1 or + * VIRT_EN_INCL = 1 & VIRT_EN_POR = 0 & SCFGR_VIRT_EN = 1 + */ + if ((comp_params & CTPR_MS_VIRT_EN_POR) || + (!(comp_params & CTPR_MS_VIRT_EN_POR) && + (scfgr & SCFGR_VIRT_EN))) + ctrlpriv->virt_en = 1; + } else { + /* VIRT_EN_INCL = 0 && VIRT_EN_POR_VALUE = 1 */ + if (comp_params & CTPR_MS_VIRT_EN_POR) + ctrlpriv->virt_en = 1; + } + + if (ctrlpriv->virt_en == 1) + setbits32(&topregs->ctrl.jrstart, JRSTART_JR0_START | + JRSTART_JR1_START | JRSTART_JR2_START | + JRSTART_JR3_START); + if (sizeof(dma_addr_t) == sizeof(u64)) if (of_device_is_compatible(nprop, "fsl,sec-v5.0")) dma_set_mask(dev, DMA_BIT_MASK(40)); |