diff options
author | Viresh Kumar <viresh.kumar@st.com> | 2011-08-05 10:02:43 (GMT) |
---|---|---|
committer | Vinod Koul <vinod.koul@intel.com> | 2011-09-19 09:43:06 (GMT) |
commit | b7f69d9d4283cfbbf7458962cf9bdba6463b831d (patch) | |
tree | 76e29e885d467486922f3b2fbd2c480a7b5a1b8f /drivers/dma/amba-pl08x.c | |
parent | 937bb6e4c676fecbfbc1939b942241c3f27bf5d8 (diff) | |
download | linux-fsl-qoriq-b7f69d9d4283cfbbf7458962cf9bdba6463b831d.tar.xz |
dmaengine/amba-pl08x: Add support for sg len greater than one for slave transfers
Untill now, sg_len greater than one is not supported. This patch adds support to
do that.
Note: Still, if peripheral is flow controller, sg_len can't be greater that one.
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Diffstat (limited to 'drivers/dma/amba-pl08x.c')
-rw-r--r-- | drivers/dma/amba-pl08x.c | 378 |
1 files changed, 215 insertions, 163 deletions
diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index cd8df7f..2c390d1 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -352,7 +352,9 @@ static u32 pl08x_getbytes_chan(struct pl08x_dma_chan *plchan) if (!list_empty(&plchan->pend_list)) { struct pl08x_txd *txdi; list_for_each_entry(txdi, &plchan->pend_list, node) { - bytes += txdi->len; + struct pl08x_sg *dsg; + list_for_each_entry(dsg, &txd->dsg_list, node) + bytes += dsg->len; } } @@ -567,8 +569,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_lli_build_data bd; int num_llis = 0; u32 cctl, early_bytes = 0; - size_t max_bytes_per_lli, total_bytes = 0; + size_t max_bytes_per_lli, total_bytes; struct pl08x_lli *llis_va; + struct pl08x_sg *dsg; txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); if (!txd->llis_va) { @@ -578,13 +581,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x->pool_ctr++; - /* Get the default CCTL */ - cctl = txd->cctl; - bd.txd = txd; - bd.srcbus.addr = txd->src_addr; - bd.dstbus.addr = txd->dst_addr; bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0; + cctl = txd->cctl; /* Find maximum width of the source bus */ bd.srcbus.maxwidth = @@ -596,162 +595,179 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, pl08x_get_bytes_for_cctl((cctl & PL080_CONTROL_DWIDTH_MASK) >> PL080_CONTROL_DWIDTH_SHIFT); - /* Set up the bus widths to the maximum */ - bd.srcbus.buswidth = bd.srcbus.maxwidth; - bd.dstbus.buswidth = bd.dstbus.maxwidth; + list_for_each_entry(dsg, &txd->dsg_list, node) { + total_bytes = 0; + cctl = txd->cctl; - /* We need to count this down to zero */ - bd.remainder = txd->len; + bd.srcbus.addr = dsg->src_addr; + bd.dstbus.addr = dsg->dst_addr; + bd.remainder = dsg->len; + bd.srcbus.buswidth = bd.srcbus.maxwidth; + bd.dstbus.buswidth = bd.dstbus.maxwidth; - pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); + pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); - dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", - bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", - bd.srcbus.buswidth, - bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", - bd.dstbus.buswidth, - bd.remainder); - dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", - mbus == &bd.srcbus ? "src" : "dst", - sbus == &bd.srcbus ? "src" : "dst"); + dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", + bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", + bd.srcbus.buswidth, + bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", + bd.dstbus.buswidth, + bd.remainder); + dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", + mbus == &bd.srcbus ? "src" : "dst", + sbus == &bd.srcbus ? "src" : "dst"); - /* - * Zero length is only allowed if all these requirements are met: - * - flow controller is peripheral. - * - src.addr is aligned to src.width - * - dst.addr is aligned to dst.width - * - * sg_len == 1 should be true, as there can be two cases here: - * - Memory addresses are contiguous and are not scattered. Here, Only - * one sg will be passed by user driver, with memory address and zero - * length. We pass this to controller and after the transfer it will - * receive the last burst request from peripheral and so transfer - * finishes. - * - * - Memory addresses are scattered and are not contiguous. Here, - * Obviously as DMA controller doesn't know when a lli's transfer gets - * over, it can't load next lli. So in this case, there has to be an - * assumption that only one lli is supported. Thus, we can't have - * scattered addresses. - */ - if (!bd.remainder) { - u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> - PL080_CONFIG_FLOW_CONTROL_SHIFT; - if (!((fc >= PL080_FLOW_SRC2DST_DST) && + /* + * Zero length is only allowed if all these requirements are + * met: + * - flow controller is peripheral. + * - src.addr is aligned to src.width + * - dst.addr is aligned to dst.width + * + * sg_len == 1 should be true, as there can be two cases here: + * + * - Memory addresses are contiguous and are not scattered. + * Here, Only one sg will be passed by user driver, with + * memory address and zero length. We pass this to controller + * and after the transfer it will receive the last burst + * request from peripheral and so transfer finishes. + * + * - Memory addresses are scattered and are not contiguous. + * Here, Obviously as DMA controller doesn't know when a lli's + * transfer gets over, it can't load next lli. So in this + * case, there has to be an assumption that only one lli is + * supported. Thus, we can't have scattered addresses. + */ + if (!bd.remainder) { + u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> + PL080_CONFIG_FLOW_CONTROL_SHIFT; + if (!((fc >= PL080_FLOW_SRC2DST_DST) && (fc <= PL080_FLOW_SRC2DST_SRC))) { - dev_err(&pl08x->adev->dev, "%s sg len can't be zero", - __func__); - return 0; - } - - if ((bd.srcbus.addr % bd.srcbus.buswidth) || - (bd.srcbus.addr % bd.srcbus.buswidth)) { - dev_err(&pl08x->adev->dev, - "%s src & dst address must be aligned to src" - " & dst width if peripheral is flow controller", - __func__); - return 0; - } - - cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, - bd.dstbus.buswidth, 0); - pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); - } + dev_err(&pl08x->adev->dev, "%s sg len can't be zero", + __func__); + return 0; + } - /* - * Send byte by byte for following cases - * - Less than a bus width available - * - until master bus is aligned - */ - if (bd.remainder < mbus->buswidth) - early_bytes = bd.remainder; - else if ((mbus->addr) % (mbus->buswidth)) { - early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth); - if ((bd.remainder - early_bytes) < mbus->buswidth) - early_bytes = bd.remainder; - } + if ((bd.srcbus.addr % bd.srcbus.buswidth) || + (bd.srcbus.addr % bd.srcbus.buswidth)) { + dev_err(&pl08x->adev->dev, + "%s src & dst address must be aligned to src" + " & dst width if peripheral is flow controller", + __func__); + return 0; + } - if (early_bytes) { - dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs " - "(remain 0x%08x)\n", __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, - &total_bytes); - } + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, 0); + pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + break; + } - if (bd.remainder) { /* - * Master now aligned - * - if slave is not then we must set its width down + * Send byte by byte for following cases + * - Less than a bus width available + * - until master bus is aligned */ - if (sbus->addr % sbus->buswidth) { - dev_dbg(&pl08x->adev->dev, - "%s set down bus width to one byte\n", - __func__); + if (bd.remainder < mbus->buswidth) + early_bytes = bd.remainder; + else if ((mbus->addr) % (mbus->buswidth)) { + early_bytes = mbus->buswidth - (mbus->addr) % + (mbus->buswidth); + if ((bd.remainder - early_bytes) < mbus->buswidth) + early_bytes = bd.remainder; + } - sbus->buswidth = 1; + if (early_bytes) { + dev_vdbg(&pl08x->adev->dev, + "%s byte width LLIs (remain 0x%08x)\n", + __func__, bd.remainder); + prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, + &total_bytes); } - /* Bytes transferred = tsize * src width, not MIN(buswidths) */ - max_bytes_per_lli = bd.srcbus.buswidth * - PL080_CONTROL_TRANSFER_SIZE_MASK; + if (bd.remainder) { + /* + * Master now aligned + * - if slave is not then we must set its width down + */ + if (sbus->addr % sbus->buswidth) { + dev_dbg(&pl08x->adev->dev, + "%s set down bus width to one byte\n", + __func__); - /* - * Make largest possible LLIs until less than one bus - * width left - */ - while (bd.remainder > (mbus->buswidth - 1)) { - size_t lli_len, tsize, width; + sbus->buswidth = 1; + } /* - * If enough left try to send max possible, - * otherwise try to send the remainder + * Bytes transferred = tsize * src width, not + * MIN(buswidths) */ - lli_len = min(bd.remainder, max_bytes_per_lli); + max_bytes_per_lli = bd.srcbus.buswidth * + PL080_CONTROL_TRANSFER_SIZE_MASK; + dev_vdbg(&pl08x->adev->dev, + "%s max bytes per lli = %zu\n", + __func__, max_bytes_per_lli); /* - * Check against maximum bus alignment: Calculate actual - * transfer size in relation to bus width and get a - * maximum remainder of the highest bus width - 1 + * Make largest possible LLIs until less than one bus + * width left */ - width = max(mbus->buswidth, sbus->buswidth); - lli_len = (lli_len / width) * width; - tsize = lli_len / bd.srcbus.buswidth; + while (bd.remainder > (mbus->buswidth - 1)) { + size_t lli_len, tsize, width; - dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of " - "size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, bd.remainder); + /* + * If enough left try to send max possible, + * otherwise try to send the remainder + */ + lli_len = min(bd.remainder, max_bytes_per_lli); - cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + /* + * Check against maximum bus alignment: + * Calculate actual transfer size in relation to + * bus width an get a maximum remainder of the + * highest bus width - 1 + */ + width = max(mbus->buswidth, sbus->buswidth); + lli_len = (lli_len / width) * width; + tsize = lli_len / bd.srcbus.buswidth; + + dev_vdbg(&pl08x->adev->dev, + "%s fill lli with single lli chunk of " + "size 0x%08zx (remainder 0x%08zx)\n", + __func__, lli_len, bd.remainder); + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, bd.dstbus.buswidth, tsize); - pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl); - total_bytes += lli_len; - } + pl08x_fill_lli_for_desc(&bd, num_llis++, + lli_len, cctl); + total_bytes += lli_len; + } - /* - * Send any odd bytes - */ - if (bd.remainder) { - dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, send odd bytes (remain %zu)\n", - __func__, bd.remainder); - prep_byte_width_lli(&bd, &cctl, bd.remainder, - num_llis++, &total_bytes); + /* + * Send any odd bytes + */ + if (bd.remainder) { + dev_vdbg(&pl08x->adev->dev, + "%s align with boundary, send odd bytes (remain %zu)\n", + __func__, bd.remainder); + prep_byte_width_lli(&bd, &cctl, bd.remainder, + num_llis++, &total_bytes); + } } - } - if (total_bytes != txd->len) { - dev_err(&pl08x->adev->dev, - "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", - __func__, total_bytes, txd->len); - return 0; - } + if (total_bytes != dsg->len) { + dev_err(&pl08x->adev->dev, + "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", + __func__, total_bytes, dsg->len); + return 0; + } - if (num_llis >= MAX_NUM_TSFR_LLIS) { - dev_err(&pl08x->adev->dev, - "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n", - __func__, (u32) MAX_NUM_TSFR_LLIS); - return 0; + if (num_llis >= MAX_NUM_TSFR_LLIS) { + dev_err(&pl08x->adev->dev, + "%s need to increase MAX_NUM_TSFR_LLIS from 0x%08x\n", + __func__, (u32) MAX_NUM_TSFR_LLIS); + return 0; + } } llis_va = txd->llis_va; @@ -784,11 +800,18 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, static void pl08x_free_txd(struct pl08x_driver_data *pl08x, struct pl08x_txd *txd) { + struct pl08x_sg *dsg, *_dsg; + /* Free the LLI */ dma_pool_free(pl08x->pool, txd->llis_va, txd->llis_bus); pl08x->pool_ctr--; + list_for_each_entry_safe(dsg, _dsg, &txd->dsg_list, node) { + list_del(&dsg->node); + kfree(dsg); + } + kfree(txd); } @@ -1234,6 +1257,7 @@ static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, txd->tx.flags = flags; txd->tx.tx_submit = pl08x_tx_submit; INIT_LIST_HEAD(&txd->node); + INIT_LIST_HEAD(&txd->dsg_list); /* Always enable error and terminal interrupts */ txd->ccfg = PL080_CONFIG_ERR_IRQ_MASK | @@ -1252,6 +1276,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; + struct pl08x_sg *dsg; int ret; txd = pl08x_get_txd(plchan, flags); @@ -1261,10 +1286,19 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy( return NULL; } + dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); + if (!dsg) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, "%s no memory for pl080 sg\n", + __func__); + return NULL; + } + list_add_tail(&dsg->node, &txd->dsg_list); + txd->direction = DMA_NONE; - txd->src_addr = src; - txd->dst_addr = dest; - txd->len = len; + dsg->src_addr = src; + dsg->dst_addr = dest; + dsg->len = len; /* Set platform data for m2m */ txd->ccfg |= PL080_FLOW_MEM2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; @@ -1293,19 +1327,13 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; + struct pl08x_sg *dsg; + struct scatterlist *sg; + dma_addr_t slave_addr; int ret, tmp; - /* - * Current implementation ASSUMES only one sg - */ - if (sg_len != 1) { - dev_err(&pl08x->adev->dev, "%s prepared too long sglist\n", - __func__); - BUG(); - } - dev_dbg(&pl08x->adev->dev, "%s prepare transaction of %d bytes from %s\n", - __func__, sgl->length, plchan->name); + __func__, sgl->length, plchan->name); txd = pl08x_get_txd(plchan, flags); if (!txd) { @@ -1324,17 +1352,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( * channel target address dynamically at runtime. */ txd->direction = direction; - txd->len = sgl->length; if (direction == DMA_TO_DEVICE) { txd->cctl = plchan->dst_cctl; - txd->src_addr = sgl->dma_address; - txd->dst_addr = plchan->dst_addr; + slave_addr = plchan->dst_addr; } else if (direction == DMA_FROM_DEVICE) { txd->cctl = plchan->src_cctl; - txd->src_addr = plchan->src_addr; - txd->dst_addr = sgl->dma_address; + slave_addr = plchan->src_addr; } else { + pl08x_free_txd(pl08x, txd); dev_err(&pl08x->adev->dev, "%s direction unsupported\n", __func__); return NULL; @@ -1349,6 +1375,26 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + for_each_sg(sgl, sg, sg_len, tmp) { + dsg = kzalloc(sizeof(struct pl08x_sg), GFP_NOWAIT); + if (!dsg) { + pl08x_free_txd(pl08x, txd); + dev_err(&pl08x->adev->dev, "%s no mem for pl080 sg\n", + __func__); + return NULL; + } + list_add_tail(&dsg->node, &txd->dsg_list); + + dsg->len = sg_dma_len(sg); + if (direction == DMA_TO_DEVICE) { + dsg->src_addr = sg_phys(sg); + dsg->dst_addr = slave_addr; + } else { + dsg->src_addr = slave_addr; + dsg->dst_addr = sg_phys(sg); + } + } + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1452,22 +1498,28 @@ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) static void pl08x_unmap_buffers(struct pl08x_txd *txd) { struct device *dev = txd->tx.chan->device->dev; + struct pl08x_sg *dsg; if (!(txd->tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) { if (txd->tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE) - dma_unmap_single(dev, txd->src_addr, txd->len, - DMA_TO_DEVICE); - else - dma_unmap_page(dev, txd->src_addr, txd->len, - DMA_TO_DEVICE); + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + else { + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->src_addr, dsg->len, + DMA_TO_DEVICE); + } } if (!(txd->tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) { if (txd->tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE) - dma_unmap_single(dev, txd->dst_addr, txd->len, - DMA_FROM_DEVICE); + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_single(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); else - dma_unmap_page(dev, txd->dst_addr, txd->len, - DMA_FROM_DEVICE); + list_for_each_entry(dsg, &txd->dsg_list, node) + dma_unmap_page(dev, dsg->dst_addr, dsg->len, + DMA_FROM_DEVICE); } } |