ppc440spe-adma: adds updated ppc440spe adma driver

This patch adds new version of the PPC440SPe ADMA driver.

Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

1 files changed, 223 insertions, 0 deletions

diff --git a/drivers/dma/ppc4xx/dma.h b/drivers/dma/ppc4xx/dma.h
new file mode 100644
index 0000000..bcde2df
--- /dev/null
+++ b/drivers/dma/ppc4xx/dma.h
@@ -0,0 +1,223 @@
+/*
+ * 440SPe's DMA engines support header file
+ *
+ * 2006-2009 (C) DENX Software Engineering.
+ *
+ * Author: Yuri Tikhonov <yur@emcraft.com>
+ *
+ * This file is licensed under the term of  the GNU General Public License
+ * version 2. The program licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef	_PPC440SPE_DMA_H
+#define _PPC440SPE_DMA_H
+
+#include <linux/types.h>
+
+/* Number of elements in the array with statical CDBs */
+#define	MAX_STAT_DMA_CDBS	16
+/* Number of DMA engines available on the contoller */
+#define DMA_ENGINES_NUM		2
+
+/* Maximum h/w supported number of destinations */
+#define DMA_DEST_MAX_NUM	2
+
+/* FIFO's params */
+#define DMA0_FIFO_SIZE		0x1000
+#define DMA1_FIFO_SIZE		0x1000
+#define DMA_FIFO_ENABLE		(1<<12)
+
+/* DMA Configuration Register. Data Transfer Engine PLB Priority: */
+#define DMA_CFG_DXEPR_LP	(0<<26)
+#define DMA_CFG_DXEPR_HP	(3<<26)
+#define DMA_CFG_DXEPR_HHP	(2<<26)
+#define DMA_CFG_DXEPR_HHHP	(1<<26)
+
+/* DMA Configuration Register. DMA FIFO Manager PLB Priority: */
+#define DMA_CFG_DFMPP_LP	(0<<23)
+#define DMA_CFG_DFMPP_HP	(3<<23)
+#define DMA_CFG_DFMPP_HHP	(2<<23)
+#define DMA_CFG_DFMPP_HHHP	(1<<23)
+
+/* DMA Configuration Register. Force 64-byte Alignment */
+#define DMA_CFG_FALGN		(1 << 19)
+
+/*UIC0:*/
+#define D0CPF_INT		(1<<12)
+#define D0CSF_INT		(1<<11)
+#define D1CPF_INT		(1<<10)
+#define D1CSF_INT		(1<<9)
+/*UIC1:*/
+#define DMAE_INT		(1<<9)
+
+/* I2O IOP Interrupt Mask Register */
+#define I2O_IOPIM_P0SNE		(1<<3)
+#define I2O_IOPIM_P0EM		(1<<5)
+#define I2O_IOPIM_P1SNE		(1<<6)
+#define I2O_IOPIM_P1EM		(1<<8)
+
+/* DMA CDB fields */
+#define DMA_CDB_MSK		(0xF)
+#define DMA_CDB_64B_ADDR	(1<<2)
+#define DMA_CDB_NO_INT		(1<<3)
+#define DMA_CDB_STATUS_MSK	(0x3)
+#define DMA_CDB_ADDR_MSK	(0xFFFFFFF0)
+
+/* DMA CDB OpCodes */
+#define DMA_CDB_OPC_NO_OP	(0x00)
+#define DMA_CDB_OPC_MV_SG1_SG2	(0x01)
+#define DMA_CDB_OPC_MULTICAST	(0x05)
+#define DMA_CDB_OPC_DFILL128	(0x24)
+#define DMA_CDB_OPC_DCHECK128	(0x23)
+
+#define DMA_CUED_XOR_BASE	(0x10000000)
+#define DMA_CUED_XOR_HB		(0x00000008)
+
+#ifdef CONFIG_440SP
+#define DMA_CUED_MULT1_OFF	0
+#define DMA_CUED_MULT2_OFF	8
+#define DMA_CUED_MULT3_OFF	16
+#define DMA_CUED_REGION_OFF	24
+#define DMA_CUED_XOR_WIN_MSK	(0xFC000000)
+#else
+#define DMA_CUED_MULT1_OFF	2
+#define DMA_CUED_MULT2_OFF	10
+#define DMA_CUED_MULT3_OFF	18
+#define DMA_CUED_REGION_OFF	26
+#define DMA_CUED_XOR_WIN_MSK	(0xF0000000)
+#endif
+
+#define DMA_CUED_REGION_MSK	0x3
+#define DMA_RXOR123		0x0
+#define DMA_RXOR124		0x1
+#define DMA_RXOR125		0x2
+#define DMA_RXOR12		0x3
+
+/* S/G addresses */
+#define DMA_CDB_SG_SRC		1
+#define DMA_CDB_SG_DST1		2
+#define DMA_CDB_SG_DST2		3
+
+/*
+ * DMAx engines Command Descriptor Block Type
+ */
+struct dma_cdb {
+	/*
+	 * Basic CDB structure (Table 20-17, p.499, 440spe_um_1_22.pdf)
+	 */
+	u8	pad0[2];        /* reserved */
+	u8	attr;		/* attributes */
+	u8	opc;		/* opcode */
+	u32	sg1u;		/* upper SG1 address */
+	u32	sg1l;		/* lower SG1 address */
+	u32	cnt;		/* SG count, 3B used */
+	u32	sg2u;		/* upper SG2 address */
+	u32	sg2l;		/* lower SG2 address */
+	u32	sg3u;		/* upper SG3 address */
+	u32	sg3l;		/* lower SG3 address */
+};
+
+/*
+ * DMAx hardware registers (p.515 in 440SPe UM 1.22)
+ */
+struct dma_regs {
+	u32	cpfpl;
+	u32	cpfph;
+	u32	csfpl;
+	u32	csfph;
+	u32	dsts;
+	u32	cfg;
+	u8	pad0[0x8];
+	u16	cpfhp;
+	u16	cpftp;
+	u16	csfhp;
+	u16	csftp;
+	u8	pad1[0x8];
+	u32	acpl;
+	u32	acph;
+	u32	s1bpl;
+	u32	s1bph;
+	u32	s2bpl;
+	u32	s2bph;
+	u32	s3bpl;
+	u32	s3bph;
+	u8	pad2[0x10];
+	u32	earl;
+	u32	earh;
+	u8	pad3[0x8];
+	u32	seat;
+	u32	sead;
+	u32	op;
+	u32	fsiz;
+};
+
+/*
+ * I2O hardware registers (p.528 in 440SPe UM 1.22)
+ */
+struct i2o_regs {
+	u32	ists;
+	u32	iseat;
+	u32	isead;
+	u8	pad0[0x14];
+	u32	idbel;
+	u8	pad1[0xc];
+	u32	ihis;
+	u32	ihim;
+	u8	pad2[0x8];
+	u32	ihiq;
+	u32	ihoq;
+	u8	pad3[0x8];
+	u32	iopis;
+	u32	iopim;
+	u32	iopiq;
+	u8	iopoq;
+	u8	pad4[3];
+	u16	iiflh;
+	u16	iiflt;
+	u16	iiplh;
+	u16	iiplt;
+	u16	ioflh;
+	u16	ioflt;
+	u16	ioplh;
+	u16	ioplt;
+	u32	iidc;
+	u32	ictl;
+	u32	ifcpp;
+	u8	pad5[0x4];
+	u16	mfac0;
+	u16	mfac1;
+	u16	mfac2;
+	u16	mfac3;
+	u16	mfac4;
+	u16	mfac5;
+	u16	mfac6;
+	u16	mfac7;
+	u16	ifcfh;
+	u16	ifcht;
+	u8	pad6[0x4];
+	u32	iifmc;
+	u32	iodb;
+	u32	iodbc;
+	u32	ifbal;
+	u32	ifbah;
+	u32	ifsiz;
+	u32	ispd0;
+	u32	ispd1;
+	u32	ispd2;
+	u32	ispd3;
+	u32	ihipl;
+	u32	ihiph;
+	u32	ihopl;
+	u32	ihoph;
+	u32	iiipl;
+	u32	iiiph;
+	u32	iiopl;
+	u32	iioph;
+	u32	ifcpl;
+	u32	ifcph;
+	u8	pad7[0x8];
+	u32	iopt;
+};
+
+#endif /* _PPC440SPE_DMA_H */