diff options
author | Ben Skeggs <bskeggs@redhat.com> | 2011-07-03 11:16:12 (GMT) |
---|---|---|
committer | Ben Skeggs <bskeggs@redhat.com> | 2011-09-20 06:04:36 (GMT) |
commit | 591b06d73bb8a2da879b1159342b8be192bf1119 (patch) | |
tree | 0907df5bb26c726266d8313685fe3192ea33673f /drivers/gpu/drm/nouveau/nv04_timer.c | |
parent | 16cd399c65bc68332a860b0b572079d0316df3ca (diff) | |
download | linux-fsl-qoriq-591b06d73bb8a2da879b1159342b8be192bf1119.tar.xz |
drm/nouveau/tmr: calibrate for ns timestamps on init
We previously assumed (incorrectly a lot of the time) that PTIMER would
be programmed at a frequency which'd give its 64-bit timestamps in
nanoseconds.
By programming PTIMER ourselves, we avoid this problem.
Reviewed-by: Martin Peres <martin.peres@ensi-bourges.fr>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Diffstat (limited to 'drivers/gpu/drm/nouveau/nv04_timer.c')
-rw-r--r-- | drivers/gpu/drm/nouveau/nv04_timer.c | 108 |
1 files changed, 82 insertions, 26 deletions
diff --git a/drivers/gpu/drm/nouveau/nv04_timer.c b/drivers/gpu/drm/nouveau/nv04_timer.c index 1d09ddd..afb9d4b 100644 --- a/drivers/gpu/drm/nouveau/nv04_timer.c +++ b/drivers/gpu/drm/nouveau/nv04_timer.c @@ -3,46 +3,102 @@ #include "nouveau_drv.h" #include "nouveau_drm.h" +static u32 +nv04_crystal_freq(struct drm_device *dev) +{ + struct drm_nouveau_private *dev_priv = dev->dev_private; + u32 extdev_boot0 = nv_rd32(dev, 0x101000); + int type; + + type = !!(extdev_boot0 & 0x00000040); + if ((dev_priv->chipset >= 0x17 && dev_priv->chipset < 0x20) || + dev_priv->chipset >= 0x25) + type |= (extdev_boot0 & 0x00400000) ? 2 : 0; + + switch (type) { + case 0: return 13500000; + case 1: return 14318180; + case 2: return 27000000; + case 3: return 25000000; + default: + break; + } + + return 0; +} + int nv04_timer_init(struct drm_device *dev) { + struct drm_nouveau_private *dev_priv = dev->dev_private; + u32 m, n, d; + nv_wr32(dev, NV04_PTIMER_INTR_EN_0, 0x00000000); nv_wr32(dev, NV04_PTIMER_INTR_0, 0xFFFFFFFF); - /* Just use the pre-existing values when possible for now; these regs - * are not written in nv (driver writer missed a /4 on the address), and - * writing 8 and 3 to the correct regs breaks the timings on the LVDS - * hardware sequencing microcode. - * A correct solution (involving calculations with the GPU PLL) can - * be done when kernel modesetting lands - */ - if (!nv_rd32(dev, NV04_PTIMER_NUMERATOR) || - !nv_rd32(dev, NV04_PTIMER_DENOMINATOR)) { - nv_wr32(dev, NV04_PTIMER_NUMERATOR, 0x00000008); - nv_wr32(dev, NV04_PTIMER_DENOMINATOR, 0x00000003); + /* aim for 31.25MHz, which gives us nanosecond timestamps */ + d = 1000000000 / 32; + + /* determine base clock for timer source */ + if (dev_priv->chipset < 0x40) { + n = dev_priv->engine.pm.clock_get(dev, PLL_CORE); + } else + if (dev_priv->chipset == 0x40) { + /*XXX: figure this out */ + n = 0; + } else { + n = nv04_crystal_freq(dev); + m = 1; + while (n < (d * 2)) { + n += (n / m); + m++; + } + + nv_wr32(dev, 0x009220, m - 1); } + if (!n) { + NV_WARN(dev, "PTIMER: unknown input clock freq\n"); + if (!nv_rd32(dev, NV04_PTIMER_NUMERATOR) || + !nv_rd32(dev, NV04_PTIMER_DENOMINATOR)) { + nv_wr32(dev, NV04_PTIMER_NUMERATOR, 1); + nv_wr32(dev, NV04_PTIMER_DENOMINATOR, 1); + } + return 0; + } + + /* reduce ratio to acceptable values */ + while (((n % 5) == 0) && ((d % 5) == 0)) { + n /= 5; + d /= 5; + } + + while (((n % 2) == 0) && ((d % 2) == 0)) { + n /= 2; + d /= 2; + } + + while (n > 0xffff || d > 0xffff) { + n >>= 1; + d >>= 1; + } + + nv_wr32(dev, NV04_PTIMER_NUMERATOR, n); + nv_wr32(dev, NV04_PTIMER_DENOMINATOR, d); return 0; } -uint64_t +u64 nv04_timer_read(struct drm_device *dev) { - uint32_t low; - /* From kmmio dumps on nv28 this looks like how the blob does this. - * It reads the high dword twice, before and after. - * The only explanation seems to be that the 64-bit timer counter - * advances between high and low dword reads and may corrupt the - * result. Not confirmed. - */ - uint32_t high2 = nv_rd32(dev, NV04_PTIMER_TIME_1); - uint32_t high1; + u32 hi, lo; + do { - high1 = high2; - low = nv_rd32(dev, NV04_PTIMER_TIME_0); - high2 = nv_rd32(dev, NV04_PTIMER_TIME_1); - } while (high1 != high2); - return (((uint64_t)high2) << 32) | (uint64_t)low; + hi = nv_rd32(dev, NV04_PTIMER_TIME_1); + lo = nv_rd32(dev, NV04_PTIMER_TIME_0); + } while (hi != nv_rd32(dev, NV04_PTIMER_TIME_1)); + + return ((u64)hi << 32 | lo); } void |