Automatic merge with /usr/src/ntfs-2.6.git.

1 files changed, 1575 insertions, 0 deletions

diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
new file mode 100644
index 0000000..b4d7fd4
--- /dev/null
+++ b/drivers/hwmon/lm85.c
@@ -0,0 +1,1575 @@
+/*
+    lm85.c - Part of lm_sensors, Linux kernel modules for hardware
+             monitoring
+    Copyright (c) 1998, 1999  Frodo Looijaard <frodol@dds.nl> 
+    Copyright (c) 2002, 2003  Philip Pokorny <ppokorny@penguincomputing.com>
+    Copyright (c) 2003        Margit Schubert-While <margitsw@t-online.de>
+    Copyright (c) 2004        Justin Thiessen <jthiessen@penguincomputing.com>
+
+    Chip details at	      <http://www.national.com/ds/LM/LM85.pdf>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/i2c-sensor.h>
+#include <linux/i2c-vid.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END };
+static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END };
+
+/* Insmod parameters */
+SENSORS_INSMOD_6(lm85b, lm85c, adm1027, adt7463, emc6d100, emc6d102);
+
+/* The LM85 registers */
+
+#define	LM85_REG_IN(nr)			(0x20 + (nr))
+#define	LM85_REG_IN_MIN(nr)		(0x44 + (nr) * 2)
+#define	LM85_REG_IN_MAX(nr)		(0x45 + (nr) * 2)
+
+#define	LM85_REG_TEMP(nr)		(0x25 + (nr))
+#define	LM85_REG_TEMP_MIN(nr)		(0x4e + (nr) * 2)
+#define	LM85_REG_TEMP_MAX(nr)		(0x4f + (nr) * 2)
+
+/* Fan speeds are LSB, MSB (2 bytes) */
+#define	LM85_REG_FAN(nr)		(0x28 + (nr) *2)
+#define	LM85_REG_FAN_MIN(nr)		(0x54 + (nr) *2)
+
+#define	LM85_REG_PWM(nr)		(0x30 + (nr))
+
+#define	ADT7463_REG_OPPOINT(nr)		(0x33 + (nr))
+
+#define	ADT7463_REG_TMIN_CTL1		0x36
+#define	ADT7463_REG_TMIN_CTL2		0x37
+
+#define	LM85_REG_DEVICE			0x3d
+#define	LM85_REG_COMPANY		0x3e
+#define	LM85_REG_VERSTEP		0x3f
+/* These are the recognized values for the above regs */
+#define	LM85_DEVICE_ADX			0x27
+#define	LM85_COMPANY_NATIONAL		0x01
+#define	LM85_COMPANY_ANALOG_DEV		0x41
+#define	LM85_COMPANY_SMSC      		0x5c
+#define	LM85_VERSTEP_VMASK              0xf0
+#define	LM85_VERSTEP_GENERIC		0x60
+#define	LM85_VERSTEP_LM85C		0x60
+#define	LM85_VERSTEP_LM85B		0x62
+#define	LM85_VERSTEP_ADM1027		0x60
+#define	LM85_VERSTEP_ADT7463		0x62
+#define	LM85_VERSTEP_ADT7463C		0x6A
+#define	LM85_VERSTEP_EMC6D100_A0        0x60
+#define	LM85_VERSTEP_EMC6D100_A1        0x61
+#define	LM85_VERSTEP_EMC6D102		0x65
+
+#define	LM85_REG_CONFIG			0x40
+
+#define	LM85_REG_ALARM1			0x41
+#define	LM85_REG_ALARM2			0x42
+
+#define	LM85_REG_VID			0x43
+
+/* Automated FAN control */
+#define	LM85_REG_AFAN_CONFIG(nr)	(0x5c + (nr))
+#define	LM85_REG_AFAN_RANGE(nr)		(0x5f + (nr))
+#define	LM85_REG_AFAN_SPIKE1		0x62
+#define	LM85_REG_AFAN_SPIKE2		0x63
+#define	LM85_REG_AFAN_MINPWM(nr)	(0x64 + (nr))
+#define	LM85_REG_AFAN_LIMIT(nr)		(0x67 + (nr))
+#define	LM85_REG_AFAN_CRITICAL(nr)	(0x6a + (nr))
+#define	LM85_REG_AFAN_HYST1		0x6d
+#define	LM85_REG_AFAN_HYST2		0x6e
+
+#define	LM85_REG_TACH_MODE		0x74
+#define	LM85_REG_SPINUP_CTL		0x75
+
+#define	ADM1027_REG_TEMP_OFFSET(nr)	(0x70 + (nr))
+#define	ADM1027_REG_CONFIG2		0x73
+#define	ADM1027_REG_INTMASK1		0x74
+#define	ADM1027_REG_INTMASK2		0x75
+#define	ADM1027_REG_EXTEND_ADC1		0x76
+#define	ADM1027_REG_EXTEND_ADC2		0x77
+#define	ADM1027_REG_CONFIG3		0x78
+#define	ADM1027_REG_FAN_PPR		0x7b
+
+#define	ADT7463_REG_THERM		0x79
+#define	ADT7463_REG_THERM_LIMIT		0x7A
+
+#define EMC6D100_REG_ALARM3             0x7d
+/* IN5, IN6 and IN7 */
+#define	EMC6D100_REG_IN(nr)             (0x70 + ((nr)-5))
+#define	EMC6D100_REG_IN_MIN(nr)         (0x73 + ((nr)-5) * 2)
+#define	EMC6D100_REG_IN_MAX(nr)         (0x74 + ((nr)-5) * 2)
+#define	EMC6D102_REG_EXTEND_ADC1	0x85
+#define	EMC6D102_REG_EXTEND_ADC2	0x86
+#define	EMC6D102_REG_EXTEND_ADC3	0x87
+#define	EMC6D102_REG_EXTEND_ADC4	0x88
+
+#define	LM85_ALARM_IN0			0x0001
+#define	LM85_ALARM_IN1			0x0002
+#define	LM85_ALARM_IN2			0x0004
+#define	LM85_ALARM_IN3			0x0008
+#define	LM85_ALARM_TEMP1		0x0010
+#define	LM85_ALARM_TEMP2		0x0020
+#define	LM85_ALARM_TEMP3		0x0040
+#define	LM85_ALARM_ALARM2		0x0080
+#define	LM85_ALARM_IN4			0x0100
+#define	LM85_ALARM_RESERVED		0x0200
+#define	LM85_ALARM_FAN1			0x0400
+#define	LM85_ALARM_FAN2			0x0800
+#define	LM85_ALARM_FAN3			0x1000
+#define	LM85_ALARM_FAN4			0x2000
+#define	LM85_ALARM_TEMP1_FAULT		0x4000
+#define	LM85_ALARM_TEMP3_FAULT		0x8000
+
+
+/* Conversions. Rounding and limit checking is only done on the TO_REG 
+   variants. Note that you should be a bit careful with which arguments
+   these macros are called: arguments may be evaluated more than once.
+ */
+
+/* IN are scaled acording to built-in resistors */
+static int lm85_scaling[] = {  /* .001 Volts */
+		2500, 2250, 3300, 5000, 12000,
+		3300, 1500, 1800 /*EMC6D100*/
+	};
+#define SCALE(val,from,to)		(((val)*(to) + ((from)/2))/(from))
+
+#define INS_TO_REG(n,val)	\
+		SENSORS_LIMIT(SCALE(val,lm85_scaling[n],192),0,255)
+
+#define INSEXT_FROM_REG(n,val,ext,scale)	\
+		SCALE((val)*(scale) + (ext),192*(scale),lm85_scaling[n])
+
+#define INS_FROM_REG(n,val)   INSEXT_FROM_REG(n,val,0,1)
+
+/* FAN speed is measured using 90kHz clock */
+#define FAN_TO_REG(val)		(SENSORS_LIMIT( (val)<=0?0: 5400000/(val),0,65534))
+#define FAN_FROM_REG(val)	((val)==0?-1:(val)==0xffff?0:5400000/(val))
+
+/* Temperature is reported in .001 degC increments */
+#define TEMP_TO_REG(val)	\
+		SENSORS_LIMIT(SCALE(val,1000,1),-127,127)
+#define TEMPEXT_FROM_REG(val,ext,scale)	\
+		SCALE((val)*scale + (ext),scale,1000)
+#define TEMP_FROM_REG(val)	\
+		TEMPEXT_FROM_REG(val,0,1)
+
+#define PWM_TO_REG(val)			(SENSORS_LIMIT(val,0,255))
+#define PWM_FROM_REG(val)		(val)
+
+
+/* ZONEs have the following parameters:
+ *    Limit (low) temp,           1. degC
+ *    Hysteresis (below limit),   1. degC (0-15)
+ *    Range of speed control,     .1 degC (2-80)
+ *    Critical (high) temp,       1. degC
+ *
+ * FAN PWMs have the following parameters:
+ *    Reference Zone,                 1, 2, 3, etc.
+ *    Spinup time,                    .05 sec
+ *    PWM value at limit/low temp,    1 count
+ *    PWM Frequency,                  1. Hz
+ *    PWM is Min or OFF below limit,  flag
+ *    Invert PWM output,              flag
+ *
+ * Some chips filter the temp, others the fan.
+ *    Filter constant (or disabled)   .1 seconds
+ */
+
+/* These are the zone temperature range encodings in .001 degree C */
+static int lm85_range_map[] = {   
+		2000,  2500,  3300,  4000,  5000,  6600,
+		8000, 10000, 13300, 16000, 20000, 26600,
+		32000, 40000, 53300, 80000
+	};
+static int RANGE_TO_REG( int range )
+{
+	int i;
+
+	if ( range < lm85_range_map[0] ) { 
+		return 0 ;
+	} else if ( range > lm85_range_map[15] ) {
+		return 15 ;
+	} else {  /* find closest match */
+		for ( i = 14 ; i >= 0 ; --i ) {
+			if ( range > lm85_range_map[i] ) { /* range bracketed */
+				if ((lm85_range_map[i+1] - range) < 
+					(range - lm85_range_map[i])) {
+					i++;
+					break;
+				}
+				break;
+			}
+		}
+	}
+	return( i & 0x0f );
+}
+#define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f])
+
+/* These are the Acoustic Enhancement, or Temperature smoothing encodings
+ * NOTE: The enable/disable bit is INCLUDED in these encodings as the
+ *       MSB (bit 3, value 8).  If the enable bit is 0, the encoded value
+ *       is ignored, or set to 0.
+ */
+/* These are the PWM frequency encodings */
+static int lm85_freq_map[] = { /* .1 Hz */
+		100, 150, 230, 300, 380, 470, 620, 940
+	};
+static int FREQ_TO_REG( int freq )
+{
+	int i;
+
+	if( freq >= lm85_freq_map[7] ) { return 7 ; }
+	for( i = 0 ; i < 7 ; ++i )
+		if( freq <= lm85_freq_map[i] )
+			break ;
+	return( i & 0x07 );
+}
+#define FREQ_FROM_REG(val) (lm85_freq_map[(val)&0x07])
+
+/* Since we can't use strings, I'm abusing these numbers
+ *   to stand in for the following meanings:
+ *      1 -- PWM responds to Zone 1
+ *      2 -- PWM responds to Zone 2
+ *      3 -- PWM responds to Zone 3
+ *     23 -- PWM responds to the higher temp of Zone 2 or 3
+ *    123 -- PWM responds to highest of Zone 1, 2, or 3
+ *      0 -- PWM is always at 0% (ie, off)
+ *     -1 -- PWM is always at 100%
+ *     -2 -- PWM responds to manual control
+ */
+
+static int lm85_zone_map[] = { 1, 2, 3, -1, 0, 23, 123, -2 };
+#define ZONE_FROM_REG(val) (lm85_zone_map[((val)>>5)&0x07])
+
+static int ZONE_TO_REG( int zone )
+{
+	int i;
+
+	for( i = 0 ; i <= 7 ; ++i )
+		if( zone == lm85_zone_map[i] )
+			break ;
+	if( i > 7 )   /* Not found. */
+		i = 3;  /* Always 100% */
+	return( (i & 0x07)<<5 );
+}
+
+#define HYST_TO_REG(val) (SENSORS_LIMIT(((val)+500)/1000,0,15))
+#define HYST_FROM_REG(val) ((val)*1000)
+
+#define OFFSET_TO_REG(val) (SENSORS_LIMIT((val)/25,-127,127))
+#define OFFSET_FROM_REG(val) ((val)*25)
+
+#define PPR_MASK(fan) (0x03<<(fan *2))
+#define PPR_TO_REG(val,fan) (SENSORS_LIMIT((val)-1,0,3)<<(fan *2))
+#define PPR_FROM_REG(val,fan) ((((val)>>(fan * 2))&0x03)+1)
+
+/* i2c-vid.h defines vid_from_reg() */
+#define VID_FROM_REG(val,vrm) (vid_from_reg((val),(vrm)))
+
+/* Unlike some other drivers we DO NOT set initial limits.  Use
+ * the config file to set limits.  Some users have reported
+ * motherboards shutting down when we set limits in a previous
+ * version of the driver.
+ */
+
+/* Chip sampling rates
+ *
+ * Some sensors are not updated more frequently than once per second
+ *    so it doesn't make sense to read them more often than that.
+ *    We cache the results and return the saved data if the driver
+ *    is called again before a second has elapsed.
+ *
+ * Also, there is significant configuration data for this chip
+ *    given the automatic PWM fan control that is possible.  There
+ *    are about 47 bytes of config data to only 22 bytes of actual
+ *    readings.  So, we keep the config data up to date in the cache
+ *    when it is written and only sample it once every 1 *minute*
+ */
+#define LM85_DATA_INTERVAL  (HZ + HZ / 2)
+#define LM85_CONFIG_INTERVAL  (1 * 60 * HZ)
+
+/* For each registered LM85, we need to keep some data in memory. That
+   data is pointed to by lm85_list[NR]->data. The structure itself is
+   dynamically allocated, at the same time when a new lm85 client is
+   allocated. */
+
+/* LM85 can automatically adjust fan speeds based on temperature
+ * This structure encapsulates an entire Zone config.  There are
+ * three zones (one for each temperature input) on the lm85
+ */
+struct lm85_zone {
+	s8 limit;	/* Low temp limit */
+	u8 hyst;	/* Low limit hysteresis. (0-15) */
+	u8 range;	/* Temp range, encoded */
+	s8 critical;	/* "All fans ON" temp limit */
+	u8 off_desired; /* Actual "off" temperature specified.  Preserved 
+			 * to prevent "drift" as other autofan control
+			 * values change.
+			 */
+	u8 max_desired; /* Actual "max" temperature specified.  Preserved 
+			 * to prevent "drift" as other autofan control
+			 * values change.
+			 */
+};
+
+struct lm85_autofan {
+	u8 config;	/* Register value */
+	u8 freq;	/* PWM frequency, encoded */
+	u8 min_pwm;	/* Minimum PWM value, encoded */
+	u8 min_off;	/* Min PWM or OFF below "limit", flag */
+};
+
+struct lm85_data {
+	struct i2c_client client;
+	struct semaphore lock;
+	enum chips type;
+
+	struct semaphore update_lock;
+	int valid;		/* !=0 if following fields are valid */
+	unsigned long last_reading;	/* In jiffies */
+	unsigned long last_config;	/* In jiffies */
+
+	u8 in[8];		/* Register value */
+	u8 in_max[8];		/* Register value */
+	u8 in_min[8];		/* Register value */
+	s8 temp[3];		/* Register value */
+	s8 temp_min[3];		/* Register value */
+	s8 temp_max[3];		/* Register value */
+	s8 temp_offset[3];	/* Register value */
+	u16 fan[4];		/* Register value */
+	u16 fan_min[4];		/* Register value */
+	u8 pwm[3];		/* Register value */
+	u8 spinup_ctl;		/* Register encoding, combined */
+	u8 tach_mode;		/* Register encoding, combined */
+	u8 temp_ext[3];		/* Decoded values */
+	u8 in_ext[8];		/* Decoded values */
+	u8 adc_scale;		/* ADC Extended bits scaling factor */
+	u8 fan_ppr;		/* Register value */
+	u8 smooth[3];		/* Register encoding */
+	u8 vid;			/* Register value */
+	u8 vrm;			/* VRM version */
+	u8 syncpwm3;		/* Saved PWM3 for TACH 2,3,4 config */
+	u8 oppoint[3];		/* Register value */
+	u16 tmin_ctl;		/* Register value */
+	unsigned long therm_total; /* Cummulative therm count */
+	u8 therm_limit;		/* Register value */
+	u32 alarms;		/* Register encoding, combined */
+	struct lm85_autofan autofan[3];
+	struct lm85_zone zone[3];
+};
+
+static int lm85_attach_adapter(struct i2c_adapter *adapter);
+static int lm85_detect(struct i2c_adapter *adapter, int address,
+			int kind);
+static int lm85_detach_client(struct i2c_client *client);
+
+static int lm85_read_value(struct i2c_client *client, u8 register);
+static int lm85_write_value(struct i2c_client *client, u8 register, int value);
+static struct lm85_data *lm85_update_device(struct device *dev);
+static void lm85_init_client(struct i2c_client *client);
+
+
+static struct i2c_driver lm85_driver = {
+	.owner          = THIS_MODULE,
+	.name           = "lm85",
+	.id             = I2C_DRIVERID_LM85,
+	.flags          = I2C_DF_NOTIFY,
+	.attach_adapter = lm85_attach_adapter,
+	.detach_client  = lm85_detach_client,
+};
+
+
+/* 4 Fans */
+static ssize_t show_fan(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan[nr]) );
+}
+static ssize_t show_fan_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FAN_FROM_REG(data->fan_min[nr]) );
+}
+static ssize_t set_fan_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->fan_min[nr] = FAN_TO_REG(val);
+	lm85_write_value(client, LM85_REG_FAN_MIN(nr), data->fan_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+
+#define show_fan_offset(offset)						\
+static ssize_t show_fan_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_fan_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_fan_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_fan_##offset##_min (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_fan_min(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(fan##offset##_input, S_IRUGO, show_fan_##offset,	\
+		NULL);							\
+static DEVICE_ATTR(fan##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_fan_##offset##_min, set_fan_##offset##_min);
+
+show_fan_offset(1);
+show_fan_offset(2);
+show_fan_offset(3);
+show_fan_offset(4);
+
+/* vid, vrm, alarms */
+
+static ssize_t show_vid_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) vid_from_reg(data->vid, data->vrm));
+}
+
+static DEVICE_ATTR(cpu0_vid, S_IRUGO, show_vid_reg, NULL);
+
+static ssize_t show_vrm_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%ld\n", (long) data->vrm);
+}
+
+static ssize_t store_vrm_reg(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	u32 val;
+
+	val = simple_strtoul(buf, NULL, 10);
+	data->vrm = val;
+	return count;
+}
+
+static DEVICE_ATTR(vrm, S_IRUGO | S_IWUSR, show_vrm_reg, store_vrm_reg);
+
+static ssize_t show_alarms_reg(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf, "%u\n", data->alarms);
+}
+
+static DEVICE_ATTR(alarms, S_IRUGO, show_alarms_reg, NULL);
+
+/* pwm */
+
+static ssize_t show_pwm(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->pwm[nr]) );
+}
+static ssize_t set_pwm(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->pwm[nr] = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_PWM(nr), data->pwm[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_enable(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	int	pwm_zone;
+
+	pwm_zone = ZONE_FROM_REG(data->autofan[nr].config);
+	return sprintf(buf,"%d\n", (pwm_zone != 0 && pwm_zone != -1) );
+}
+
+#define show_pwm_reg(offset)						\
+static ssize_t show_pwm_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_pwm(dev, buf, offset - 1);				\
+}									\
+static ssize_t set_pwm_##offset (struct device *dev, struct device_attribute *attr,			\
+				 const char *buf, size_t count)		\
+{									\
+	return set_pwm(dev, buf, count, offset - 1);			\
+}									\
+static ssize_t show_pwm_enable##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_pwm_enable(dev, buf, offset - 1);			\
+}									\
+static DEVICE_ATTR(pwm##offset, S_IRUGO | S_IWUSR, 			\
+		show_pwm_##offset, set_pwm_##offset);			\
+static DEVICE_ATTR(pwm##offset##_enable, S_IRUGO, 			\
+		show_pwm_enable##offset, NULL);
+
+show_pwm_reg(1);
+show_pwm_reg(2);
+show_pwm_reg(3);
+
+/* Voltages */
+
+static ssize_t show_in(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(	buf, "%d\n", INSEXT_FROM_REG(nr,
+						     data->in[nr],
+						     data->in_ext[nr],
+						     data->adc_scale) );
+}
+static ssize_t show_in_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_min[nr]) );
+}
+static ssize_t set_in_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_min[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MIN(nr), data->in_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_in_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", INS_FROM_REG(nr, data->in_max[nr]) );
+}
+static ssize_t set_in_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->in_max[nr] = INS_TO_REG(nr, val);
+	lm85_write_value(client, LM85_REG_IN_MAX(nr), data->in_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_in_reg(offset)						\
+static ssize_t show_in_##offset (struct device *dev, struct device_attribute *attr, char *buf)		\
+{									\
+	return show_in(dev, buf, offset);				\
+}									\
+static ssize_t show_in_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_in_min(dev, buf, offset);				\
+}									\
+static ssize_t show_in_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_in_max(dev, buf, offset);				\
+}									\
+static ssize_t set_in_##offset##_min (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_min(dev, buf, count, offset);			\
+}									\
+static ssize_t set_in_##offset##_max (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_in_max(dev, buf, count, offset);			\
+}									\
+static DEVICE_ATTR(in##offset##_input, S_IRUGO, show_in_##offset, 	\
+		NULL);							\
+static DEVICE_ATTR(in##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_in_##offset##_min, set_in_##offset##_min);		\
+static DEVICE_ATTR(in##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_in_##offset##_max, set_in_##offset##_max);
+
+show_in_reg(0);
+show_in_reg(1);
+show_in_reg(2);
+show_in_reg(3);
+show_in_reg(4);
+
+/* Temps */
+
+static ssize_t show_temp(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMPEXT_FROM_REG(data->temp[nr],
+						    data->temp_ext[nr],
+						    data->adc_scale) );
+}
+static ssize_t show_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_min[nr]) );
+}
+static ssize_t set_temp_min(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->temp_min[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MIN(nr), data->temp_min[nr]);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->temp_max[nr]) );
+}
+static ssize_t set_temp_max(struct device *dev, const char *buf, 
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);	
+
+	down(&data->update_lock);
+	data->temp_max[nr] = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_TEMP_MAX(nr), data->temp_max[nr]);
+	up(&data->update_lock);
+	return count;
+}
+#define show_temp_reg(offset)						\
+static ssize_t show_temp_##offset (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_temp(dev, buf, offset - 1);				\
+}									\
+static ssize_t show_temp_##offset##_min (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_temp_min(dev, buf, offset - 1);			\
+}									\
+static ssize_t show_temp_##offset##_max (struct device *dev, struct device_attribute *attr, char *buf)	\
+{									\
+	return show_temp_max(dev, buf, offset - 1);			\
+}									\
+static ssize_t set_temp_##offset##_min (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_min(dev, buf, count, offset - 1);		\
+}									\
+static ssize_t set_temp_##offset##_max (struct device *dev, struct device_attribute *attr, 		\
+	const char *buf, size_t count) 					\
+{									\
+	return set_temp_max(dev, buf, count, offset - 1);		\
+}									\
+static DEVICE_ATTR(temp##offset##_input, S_IRUGO, show_temp_##offset,	\
+		NULL);							\
+static DEVICE_ATTR(temp##offset##_min, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_min, set_temp_##offset##_min);	\
+static DEVICE_ATTR(temp##offset##_max, S_IRUGO | S_IWUSR, 		\
+		show_temp_##offset##_max, set_temp_##offset##_max);
+
+show_temp_reg(1);
+show_temp_reg(2);
+show_temp_reg(3);
+
+
+/* Automatic PWM control */
+
+static ssize_t show_pwm_auto_channels(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", ZONE_FROM_REG(data->autofan[nr].config));
+}
+static ssize_t set_pwm_auto_channels(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);   
+
+	down(&data->update_lock);
+	data->autofan[nr].config = (data->autofan[nr].config & (~0xe0))
+		| ZONE_TO_REG(val) ;
+	lm85_write_value(client, LM85_REG_AFAN_CONFIG(nr),
+		data->autofan[nr].config);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", PWM_FROM_REG(data->autofan[nr].min_pwm));
+}
+static ssize_t set_pwm_auto_pwm_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].min_pwm = PWM_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_MINPWM(nr),
+		data->autofan[nr].min_pwm);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_minctl(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", data->autofan[nr].min_off);
+}
+static ssize_t set_pwm_auto_pwm_minctl(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].min_off = val;
+	lm85_write_value(client, LM85_REG_AFAN_SPIKE1, data->smooth[0]
+		| data->syncpwm3
+		| (data->autofan[0].min_off ? 0x20 : 0)
+		| (data->autofan[1].min_off ? 0x40 : 0)
+		| (data->autofan[2].min_off ? 0x80 : 0)
+	);
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_pwm_auto_pwm_freq(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", FREQ_FROM_REG(data->autofan[nr].freq));
+}
+static ssize_t set_pwm_auto_pwm_freq(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->autofan[nr].freq = FREQ_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		(data->zone[nr].range << 4)
+		| data->autofan[nr].freq
+	); 
+	up(&data->update_lock);
+	return count;
+}
+#define pwm_auto(offset)						\
+static ssize_t show_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_channels(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_channels (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_channels(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_min(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_min (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_min(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_minctl(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_minctl (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_minctl(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_pwm##offset##_auto_pwm_freq (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_pwm_auto_pwm_freq(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_pwm##offset##_auto_pwm_freq(struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_pwm_auto_pwm_freq(dev, buf, count, offset - 1);	\
+}									\
+static DEVICE_ATTR(pwm##offset##_auto_channels, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_channels,			\
+		set_pwm##offset##_auto_channels);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_min, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_min,			\
+		set_pwm##offset##_auto_pwm_min);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_minctl, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_minctl,			\
+		set_pwm##offset##_auto_pwm_minctl);			\
+static DEVICE_ATTR(pwm##offset##_auto_pwm_freq, S_IRUGO | S_IWUSR,	\
+		show_pwm##offset##_auto_pwm_freq,			\
+		set_pwm##offset##_auto_pwm_freq);              
+pwm_auto(1);
+pwm_auto(2);
+pwm_auto(3);
+
+/* Temperature settings for automatic PWM control */
+
+static ssize_t show_temp_auto_temp_off(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) -
+		HYST_FROM_REG(data->zone[nr].hyst));
+}
+static ssize_t set_temp_auto_temp_off(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int min;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].off_desired = TEMP_TO_REG(val);
+	data->zone[nr].hyst = HYST_TO_REG(min - val);
+	if ( nr == 0 || nr == 1 ) {
+		lm85_write_value(client, LM85_REG_AFAN_HYST1,
+			(data->zone[0].hyst << 4)
+			| data->zone[1].hyst
+			);
+	} else {
+		lm85_write_value(client, LM85_REG_AFAN_HYST2,
+			(data->zone[2].hyst << 4)
+		);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_min(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) );
+}
+static ssize_t set_temp_auto_temp_min(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->zone[nr].limit = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_LIMIT(nr),
+		data->zone[nr].limit);
+
+/* Update temp_auto_max and temp_auto_range */
+	data->zone[nr].range = RANGE_TO_REG(
+		TEMP_FROM_REG(data->zone[nr].max_desired) -
+		TEMP_FROM_REG(data->zone[nr].limit));
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| (data->autofan[nr].freq & 0x07));
+
+/* Update temp_auto_hyst and temp_auto_off */
+	data->zone[nr].hyst = HYST_TO_REG(TEMP_FROM_REG(
+		data->zone[nr].limit) - TEMP_FROM_REG(
+		data->zone[nr].off_desired));
+	if ( nr == 0 || nr == 1 ) {
+		lm85_write_value(client, LM85_REG_AFAN_HYST1,
+			(data->zone[0].hyst << 4)
+			| data->zone[1].hyst
+			);
+	} else {
+		lm85_write_value(client, LM85_REG_AFAN_HYST2,
+			(data->zone[2].hyst << 4)
+		);
+	}
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_max(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].limit) +
+		RANGE_FROM_REG(data->zone[nr].range));
+}
+static ssize_t set_temp_auto_temp_max(struct device *dev, const char *buf,
+	size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int min;
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	min = TEMP_FROM_REG(data->zone[nr].limit);
+	data->zone[nr].max_desired = TEMP_TO_REG(val);
+	data->zone[nr].range = RANGE_TO_REG(
+		val - min);
+	lm85_write_value(client, LM85_REG_AFAN_RANGE(nr),
+		((data->zone[nr].range & 0x0f) << 4)
+		| (data->autofan[nr].freq & 0x07));
+	up(&data->update_lock);
+	return count;
+}
+static ssize_t show_temp_auto_temp_crit(struct device *dev, char *buf, int nr)
+{
+	struct lm85_data *data = lm85_update_device(dev);
+	return sprintf(buf,"%d\n", TEMP_FROM_REG(data->zone[nr].critical));
+}
+static ssize_t set_temp_auto_temp_crit(struct device *dev, const char *buf,
+		size_t count, int nr)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	long val = simple_strtol(buf, NULL, 10);
+
+	down(&data->update_lock);
+	data->zone[nr].critical = TEMP_TO_REG(val);
+	lm85_write_value(client, LM85_REG_AFAN_CRITICAL(nr),
+		data->zone[nr].critical);
+	up(&data->update_lock);
+	return count;
+}
+#define temp_auto(offset)						\
+static ssize_t show_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_off(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_off (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_off(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_min(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_min (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_min(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_max(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_max (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_max(dev, buf, count, offset - 1);	\
+}									\
+static ssize_t show_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr,	\
+	char *buf)							\
+{									\
+	return show_temp_auto_temp_crit(dev, buf, offset - 1);		\
+}									\
+static ssize_t set_temp##offset##_auto_temp_crit (struct device *dev, struct device_attribute *attr,	\
+	const char *buf, size_t count)					\
+{									\
+	return set_temp_auto_temp_crit(dev, buf, count, offset - 1);	\
+}									\
+static DEVICE_ATTR(temp##offset##_auto_temp_off, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_off,			\
+		set_temp##offset##_auto_temp_off);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_min, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_min,			\
+		set_temp##offset##_auto_temp_min);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_max, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_max,			\
+		set_temp##offset##_auto_temp_max);			\
+static DEVICE_ATTR(temp##offset##_auto_temp_crit, S_IRUGO | S_IWUSR,	\
+		show_temp##offset##_auto_temp_crit,			\
+		set_temp##offset##_auto_temp_crit);
+temp_auto(1);
+temp_auto(2);
+temp_auto(3);
+
+int lm85_attach_adapter(struct i2c_adapter *adapter)
+{
+	if (!(adapter->class & I2C_CLASS_HWMON))
+		return 0;
+	return i2c_detect(adapter, &addr_data, lm85_detect);
+}
+
+int lm85_detect(struct i2c_adapter *adapter, int address,
+		int kind)
+{
+	int company, verstep ;
+	struct i2c_client *new_client = NULL;
+	struct lm85_data *data;
+	int err = 0;
+	const char *type_name = "";
+
+	if (i2c_is_isa_adapter(adapter)) {
+		/* This chip has no ISA interface */
+		goto ERROR0 ;
+	};
+
+	if (!i2c_check_functionality(adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		/* We need to be able to do byte I/O */
+		goto ERROR0 ;
+	};
+
+	/* OK. For now, we presume we have a valid client. We now create the
+	   client structure, even though we cannot fill it completely yet.
+	   But it allows us to access lm85_{read,write}_value. */
+
+	if (!(data = kmalloc(sizeof(struct lm85_data), GFP_KERNEL))) {
+		err = -ENOMEM;
+		goto ERROR0;
+	}
+	memset(data, 0, sizeof(struct lm85_data));
+
+	new_client = &data->client;
+	i2c_set_clientdata(new_client, data);
+	new_client->addr = address;
+	new_client->adapter = adapter;
+	new_client->driver = &lm85_driver;
+	new_client->flags = 0;
+
+	/* Now, we do the remaining detection. */
+
+	company = lm85_read_value(new_client, LM85_REG_COMPANY);
+	verstep = lm85_read_value(new_client, LM85_REG_VERSTEP);
+
+	dev_dbg(&adapter->dev, "Detecting device at %d,0x%02x with"
+		" COMPANY: 0x%02x and VERSTEP: 0x%02x\n",
+		i2c_adapter_id(new_client->adapter), new_client->addr,
+		company, verstep);
+
+	/* If auto-detecting, Determine the chip type. */
+	if (kind <= 0) {
+		dev_dbg(&adapter->dev, "Autodetecting device at %d,0x%02x ...\n",
+			i2c_adapter_id(adapter), address );
+		if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85C ) {
+			kind = lm85c ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && verstep == LM85_VERSTEP_LM85B ) {
+			kind = lm85b ;
+		} else if( company == LM85_COMPANY_NATIONAL
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
+				" Defaulting to LM85.\n", verstep);
+			kind = any_chip ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && verstep == LM85_VERSTEP_ADM1027 ) {
+			kind = adm1027 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep == LM85_VERSTEP_ADT7463
+			 || verstep == LM85_VERSTEP_ADT7463C) ) {
+			kind = adt7463 ;
+		} else if( company == LM85_COMPANY_ANALOG_DEV
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC ) {
+			dev_err(&adapter->dev, "Unrecognized version/stepping 0x%02x"
+				" Defaulting to Generic LM85.\n", verstep );
+			kind = any_chip ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && (verstep == LM85_VERSTEP_EMC6D100_A0
+			 || verstep == LM85_VERSTEP_EMC6D100_A1) ) {
+			/* Unfortunately, we can't tell a '100 from a '101
+			 * from the registers.  Since a '101 is a '100
+			 * in a package with fewer pins and therefore no
+			 * 3.3V, 1.5V or 1.8V inputs, perhaps if those
+			 * inputs read 0, then it's a '101.
+			 */
+			kind = emc6d100 ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && verstep == LM85_VERSTEP_EMC6D102) {
+			kind = emc6d102 ;
+		} else if( company == LM85_COMPANY_SMSC
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, "lm85: Detected SMSC chip\n");
+			dev_err(&adapter->dev, "lm85: Unrecognized version/stepping 0x%02x"
+			    " Defaulting to Generic LM85.\n", verstep );
+			kind = any_chip ;
+		} else if( kind == any_chip
+		    && (verstep & LM85_VERSTEP_VMASK) == LM85_VERSTEP_GENERIC) {
+			dev_err(&adapter->dev, "Generic LM85 Version 6 detected\n");
+			/* Leave kind as "any_chip" */
+		} else {
+			dev_dbg(&adapter->dev, "Autodetection failed\n");
+			/* Not an LM85 ... */
+			if( kind == any_chip ) {  /* User used force=x,y */
+				dev_err(&adapter->dev, "Generic LM85 Version 6 not"
+					" found at %d,0x%02x. Try force_lm85c.\n",
+					i2c_adapter_id(adapter), address );
+			}
+			err = 0 ;
+			goto ERROR1;
+		}
+	}
+
+	/* Fill in the chip specific driver values */
+	if ( kind == any_chip ) {
+		type_name = "lm85";
+	} else if ( kind == lm85b ) {
+		type_name = "lm85b";
+	} else if ( kind == lm85c ) {
+		type_name = "lm85c";
+	} else if ( kind == adm1027 ) {
+		type_name = "adm1027";
+	} else if ( kind == adt7463 ) {
+		type_name = "adt7463";
+	} else if ( kind == emc6d100){
+		type_name = "emc6d100";
+	} else if ( kind == emc6d102 ) {
+		type_name = "emc6d102";
+	}
+	strlcpy(new_client->name, type_name, I2C_NAME_SIZE);
+
+	/* Fill in the remaining client fields */
+	data->type = kind;
+	data->valid = 0;
+	init_MUTEX(&data->update_lock);
+
+	/* Tell the I2C layer a new client has arrived */
+	if ((err = i2c_attach_client(new_client)))
+		goto ERROR1;
+
+	/* Set the VRM version */
+	data->vrm = i2c_which_vrm();
+
+	/* Initialize the LM85 chip */
+	lm85_init_client(new_client);
+
+	/* Register sysfs hooks */
+	device_create_file(&new_client->dev, &dev_attr_fan1_input);
+	device_create_file(&new_client->dev, &dev_attr_fan2_input);
+	device_create_file(&new_client->dev, &dev_attr_fan3_input);
+	device_create_file(&new_client->dev, &dev_attr_fan4_input);
+	device_create_file(&new_client->dev, &dev_attr_fan1_min);
+	device_create_file(&new_client->dev, &dev_attr_fan2_min);
+	device_create_file(&new_client->dev, &dev_attr_fan3_min);
+	device_create_file(&new_client->dev, &dev_attr_fan4_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1);
+	device_create_file(&new_client->dev, &dev_attr_pwm2);
+	device_create_file(&new_client->dev, &dev_attr_pwm3);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_enable);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_enable);
+	device_create_file(&new_client->dev, &dev_attr_in0_input);
+	device_create_file(&new_client->dev, &dev_attr_in1_input);
+	device_create_file(&new_client->dev, &dev_attr_in2_input);
+	device_create_file(&new_client->dev, &dev_attr_in3_input);
+	device_create_file(&new_client->dev, &dev_attr_in4_input);
+	device_create_file(&new_client->dev, &dev_attr_in0_min);
+	device_create_file(&new_client->dev, &dev_attr_in1_min);
+	device_create_file(&new_client->dev, &dev_attr_in2_min);
+	device_create_file(&new_client->dev, &dev_attr_in3_min);
+	device_create_file(&new_client->dev, &dev_attr_in4_min);
+	device_create_file(&new_client->dev, &dev_attr_in0_max);
+	device_create_file(&new_client->dev, &dev_attr_in1_max);
+	device_create_file(&new_client->dev, &dev_attr_in2_max);
+	device_create_file(&new_client->dev, &dev_attr_in3_max);
+	device_create_file(&new_client->dev, &dev_attr_in4_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_input);
+	device_create_file(&new_client->dev, &dev_attr_temp2_input);
+	device_create_file(&new_client->dev, &dev_attr_temp3_input);
+	device_create_file(&new_client->dev, &dev_attr_temp1_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_max);
+	device_create_file(&new_client->dev, &dev_attr_vrm);
+	device_create_file(&new_client->dev, &dev_attr_cpu0_vid);
+	device_create_file(&new_client->dev, &dev_attr_alarms);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_channels);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_min);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_minctl);
+	device_create_file(&new_client->dev, &dev_attr_pwm1_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_pwm2_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_pwm3_auto_pwm_freq);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_off);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_min);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_max);
+	device_create_file(&new_client->dev, &dev_attr_temp1_auto_temp_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp2_auto_temp_crit);
+	device_create_file(&new_client->dev, &dev_attr_temp3_auto_temp_crit);
+
+	return 0;
+
+	/* Error out and cleanup code */
+    ERROR1:
+	kfree(data);
+    ERROR0:
+	return err;
+}
+
+int lm85_detach_client(struct i2c_client *client)
+{
+	i2c_detach_client(client);
+	kfree(i2c_get_clientdata(client));
+	return 0;
+}
+
+
+int lm85_read_value(struct i2c_client *client, u8 reg)
+{
+	int res;
+
+	/* What size location is it? */
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Read WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	case LM85_REG_ALARM1 :	/* Read both bytes at once */
+		res = i2c_smbus_read_byte_data(client, reg) & 0xff ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) << 8 ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Read WORD MSB, LSB */
+		res = i2c_smbus_read_byte_data(client, reg) << 8 ;
+		res |= i2c_smbus_read_byte_data(client, reg+1) & 0xff ;
+		break ;
+	default:	/* Read BYTE data */
+		res = i2c_smbus_read_byte_data(client, reg);
+		break ;
+	}
+
+	return res ;
+}
+
+int lm85_write_value(struct i2c_client *client, u8 reg, int value)
+{
+	int res ;
+
+	switch( reg ) {
+	case LM85_REG_FAN(0) :  /* Write WORD data */
+	case LM85_REG_FAN(1) :
+	case LM85_REG_FAN(2) :
+	case LM85_REG_FAN(3) :
+	case LM85_REG_FAN_MIN(0) :
+	case LM85_REG_FAN_MIN(1) :
+	case LM85_REG_FAN_MIN(2) :
+	case LM85_REG_FAN_MIN(3) :
+	/* NOTE: ALARM is read only, so not included here */
+		res = i2c_smbus_write_byte_data(client, reg, value & 0xff) ;
+		res |= i2c_smbus_write_byte_data(client, reg+1, (value>>8) & 0xff) ;
+		break ;
+	case ADT7463_REG_TMIN_CTL1 :  /* Write WORD MSB, LSB */
+		res = i2c_smbus_write_byte_data(client, reg, (value>>8) & 0xff);
+		res |= i2c_smbus_write_byte_data(client, reg+1, value & 0xff) ;
+		break ;
+	default:	/* Write BYTE data */
+		res = i2c_smbus_write_byte_data(client, reg, value);
+		break ;
+	}
+
+	return res ;
+}
+
+void lm85_init_client(struct i2c_client *client)
+{
+	int value;
+	struct lm85_data *data = i2c_get_clientdata(client);
+
+	dev_dbg(&client->dev, "Initializing device\n");
+
+	/* Warn if part was not "READY" */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	dev_dbg(&client->dev, "LM85_REG_CONFIG is: 0x%02x\n", value);
+	if( value & 0x02 ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) config is locked.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( ! (value & 0x04) ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) is not ready.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+	if( value & 0x10
+	    && ( data->type == adm1027
+		|| data->type == adt7463 ) ) {
+		dev_err(&client->dev, "Client (%d,0x%02x) VxI mode is set.  "
+			"Please report this to the lm85 maintainer.\n",
+			    i2c_adapter_id(client->adapter), client->addr );
+	};
+
+	/* WE INTENTIONALLY make no changes to the limits,
+	 *   offsets, pwms, fans and zones.  If they were
+	 *   configured, we don't want to mess with them.
+	 *   If they weren't, the default is 100% PWM, no
+	 *   control and will suffice until 'sensors -s'
+	 *   can be run by the user.
+	 */
+
+	/* Start monitoring */
+	value = lm85_read_value(client, LM85_REG_CONFIG);
+	/* Try to clear LOCK, Set START, save everything else */
+	value = (value & ~ 0x02) | 0x01 ;
+	dev_dbg(&client->dev, "Setting CONFIG to: 0x%02x\n", value);
+	lm85_write_value(client, LM85_REG_CONFIG, value);
+}
+
+static struct lm85_data *lm85_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct lm85_data *data = i2c_get_clientdata(client);
+	int i;
+
+	down(&data->update_lock);
+
+	if ( !data->valid ||
+	     time_after(jiffies, data->last_reading + LM85_DATA_INTERVAL) ) {
+		/* Things that change quickly */
+		dev_dbg(&client->dev, "Reading sensor values\n");
+		
+		/* Have to read extended bits first to "freeze" the
+		 * more significant bits that are read later.
+		 */
+		if ( (data->type == adm1027) || (data->type == adt7463) ) {
+			int ext1 = lm85_read_value(client,
+						   ADM1027_REG_EXTEND_ADC1);
+			int ext2 =  lm85_read_value(client,
+						    ADM1027_REG_EXTEND_ADC2);
+			int val = (ext1 << 8) + ext2;
+
+			for(i = 0; i <= 4; i++)
+				data->in_ext[i] = (val>>(i * 2))&0x03;
+
+			for(i = 0; i <= 2; i++)
+				data->temp_ext[i] = (val>>((i + 5) * 2))&0x03;
+		}
+
+		/* adc_scale is 2^(number of LSBs). There are 4 extra bits in
+		   the emc6d102 and 2 in the adt7463 and adm1027. In all
+		   other chips ext is always 0 and the value of scale is
+		   irrelevant. So it is left in 4*/
+		data->adc_scale = (data->type == emc6d102 ) ? 16 : 4;
+
+		for (i = 0; i <= 4; ++i) {
+			data->in[i] =
+			    lm85_read_value(client, LM85_REG_IN(i));
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan[i] =
+			    lm85_read_value(client, LM85_REG_FAN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp[i] =
+			    lm85_read_value(client, LM85_REG_TEMP(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->pwm[i] =
+			    lm85_read_value(client, LM85_REG_PWM(i));
+		}
+
+		data->alarms = lm85_read_value(client, LM85_REG_ALARM1);
+
+		if ( data->type == adt7463 ) {
+			if( data->therm_total < ULONG_MAX - 256 ) {
+			    data->therm_total +=
+				lm85_read_value(client, ADT7463_REG_THERM );
+			}
+		} else if ( data->type == emc6d100 ) {
+			/* Three more voltage sensors */
+			for (i = 5; i <= 7; ++i) {
+				data->in[i] =
+					lm85_read_value(client, EMC6D100_REG_IN(i));
+			}
+			/* More alarm bits */
+			data->alarms |=
+				lm85_read_value(client, EMC6D100_REG_ALARM3) << 16;
+		} else if (data->type == emc6d102 ) {
+			/* Have to read LSB bits after the MSB ones because
+			   the reading of the MSB bits has frozen the
+			   LSBs (backward from the ADM1027).
+			 */
+			int ext1 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC1);
+			int ext2 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC2);
+			int ext3 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC3);
+			int ext4 = lm85_read_value(client,
+						   EMC6D102_REG_EXTEND_ADC4);
+			data->in_ext[0] = ext3 & 0x0f;
+			data->in_ext[1] = ext4 & 0x0f;
+			data->in_ext[2] = (ext4 >> 4) & 0x0f;
+			data->in_ext[3] = (ext3 >> 4) & 0x0f;
+			data->in_ext[4] = (ext2 >> 4) & 0x0f;
+
+			data->temp_ext[0] = ext1 & 0x0f;
+			data->temp_ext[1] = ext2 & 0x0f;
+			data->temp_ext[2] = (ext1 >> 4) & 0x0f;
+		}
+
+		data->last_reading = jiffies ;
+	};  /* last_reading */
+
+	if ( !data->valid ||
+	     time_after(jiffies, data->last_config + LM85_CONFIG_INTERVAL) ) {
+		/* Things that don't change often */
+		dev_dbg(&client->dev, "Reading config values\n");
+
+		for (i = 0; i <= 4; ++i) {
+			data->in_min[i] =
+			    lm85_read_value(client, LM85_REG_IN_MIN(i));
+			data->in_max[i] =
+			    lm85_read_value(client, LM85_REG_IN_MAX(i));
+		}
+
+		if ( data->type == emc6d100 ) {
+			for (i = 5; i <= 7; ++i) {
+				data->in_min[i] =
+					lm85_read_value(client, EMC6D100_REG_IN_MIN(i));
+				data->in_max[i] =
+					lm85_read_value(client, EMC6D100_REG_IN_MAX(i));
+			}
+		}
+
+		for (i = 0; i <= 3; ++i) {
+			data->fan_min[i] =
+			    lm85_read_value(client, LM85_REG_FAN_MIN(i));
+		}
+
+		for (i = 0; i <= 2; ++i) {
+			data->temp_min[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MIN(i));
+			data->temp_max[i] =
+			    lm85_read_value(client, LM85_REG_TEMP_MAX(i));
+		}
+
+		data->vid = lm85_read_value(client, LM85_REG_VID);
+
+		for (i = 0; i <= 2; ++i) {
+			int val ;
+			data->autofan[i].config =
+			    lm85_read_value(client, LM85_REG_AFAN_CONFIG(i));
+			val = lm85_read_value(client, LM85_REG_AFAN_RANGE(i));
+			data->autofan[i].freq = val & 0x07 ;
+			data->zone[i].range = (val >> 4) & 0x0f ;
+			data->autofan[i].min_pwm =
+			    lm85_read_value(client, LM85_REG_AFAN_MINPWM(i));
+			data->zone[i].limit =
+			    lm85_read_value(client, LM85_REG_AFAN_LIMIT(i));
+			data->zone[i].critical =
+			    lm85_read_value(client, LM85_REG_AFAN_CRITICAL(i));
+		}
+
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE1);
+		data->smooth[0] = i & 0x0f ;
+		data->syncpwm3 = i & 0x10 ;  /* Save PWM3 config */
+		data->autofan[0].min_off = (i & 0x20) != 0 ;
+		data->autofan[1].min_off = (i & 0x40) != 0 ;
+		data->autofan[2].min_off = (i & 0x80) != 0 ;
+		i = lm85_read_value(client, LM85_REG_AFAN_SPIKE2);
+		data->smooth[1] = (i>>4) & 0x0f ;
+		data->smooth[2] = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST1);
+		data->zone[0].hyst = (i>>4) & 0x0f ;
+		data->zone[1].hyst = i & 0x0f ;
+
+		i = lm85_read_value(client, LM85_REG_AFAN_HYST2);
+		data->zone[2].hyst = (i>>4) & 0x0f ;
+
+		if ( (data->type == lm85b) || (data->type == lm85c) ) {
+			data->tach_mode = lm85_read_value(client,
+				LM85_REG_TACH_MODE );
+			data->spinup_ctl = lm85_read_value(client,
+				LM85_REG_SPINUP_CTL );
+		} else if ( (data->type == adt7463) || (data->type == adm1027) ) {
+			if ( data->type == adt7463 ) {
+				for (i = 0; i <= 2; ++i) {
+				    data->oppoint[i] = lm85_read_value(client,
+					ADT7463_REG_OPPOINT(i) );
+				}
+				data->tmin_ctl = lm85_read_value(client,
+					ADT7463_REG_TMIN_CTL1 );
+				data->therm_limit = lm85_read_value(client,
+					ADT7463_REG_THERM_LIMIT );
+			}
+			for (i = 0; i <= 2; ++i) {
+			    data->temp_offset[i] = lm85_read_value(client,
+				ADM1027_REG_TEMP_OFFSET(i) );
+			}
+			data->tach_mode = lm85_read_value(client,
+				ADM1027_REG_CONFIG3 );
+			data->fan_ppr = lm85_read_value(client,
+				ADM1027_REG_FAN_PPR );
+		}
+	
+		data->last_config = jiffies;
+	};  /* last_config */
+
+	data->valid = 1;
+
+	up(&data->update_lock);
+
+	return data;
+}
+
+
+static int __init sm_lm85_init(void)
+{
+	return i2c_add_driver(&lm85_driver);
+}
+
+static void  __exit sm_lm85_exit(void)
+{
+	i2c_del_driver(&lm85_driver);
+}
+
+/* Thanks to Richard Barrington for adding the LM85 to sensors-detect.
+ * Thanks to Margit Schubert-While <margitsw@t-online.de> for help with
+ *     post 2.7.0 CVS changes.
+ */
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Philip Pokorny <ppokorny@penguincomputing.com>, Margit Schubert-While <margitsw@t-online.de>, Justin Thiessen <jthiessen@penguincomputing.com");
+MODULE_DESCRIPTION("LM85-B, LM85-C driver");
+
+module_init(sm_lm85_init);
+module_exit(sm_lm85_exit);