diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/i2c/busses/i2c-savage4.c | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/i2c/busses/i2c-savage4.c')
-rw-r--r-- | drivers/i2c/busses/i2c-savage4.c | 205 |
1 files changed, 205 insertions, 0 deletions
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c new file mode 100644 index 0000000..092d032 --- /dev/null +++ b/drivers/i2c/busses/i2c-savage4.c @@ -0,0 +1,205 @@ +/* + i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 1998-2003 The LM Sensors Team + Alexander Wold <awold@bigfoot.com> + Mark D. Studebaker <mdsxyz123@yahoo.com> + + Based on i2c-voodoo3.c. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* This interfaces to the I2C bus of the Savage4 to gain access to + the BT869 and possibly other I2C devices. The DDC bus is not + yet supported because its register is not memory-mapped. + However we leave the DDC code here, commented out, to make + it easier to add later. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +/* 3DFX defines */ +#define PCI_CHIP_SAVAGE3D 0x8A20 +#define PCI_CHIP_SAVAGE3D_MV 0x8A21 +#define PCI_CHIP_SAVAGE4 0x8A22 +#define PCI_CHIP_SAVAGE2000 0x9102 +#define PCI_CHIP_PROSAVAGE_PM 0x8A25 +#define PCI_CHIP_PROSAVAGE_KM 0x8A26 +#define PCI_CHIP_SAVAGE_MX_MV 0x8c10 +#define PCI_CHIP_SAVAGE_MX 0x8c11 +#define PCI_CHIP_SAVAGE_IX_MV 0x8c12 +#define PCI_CHIP_SAVAGE_IX 0x8c13 + +#define REG 0xff20 /* Serial Port 1 Register */ + +/* bit locations in the register */ +#define DDC_ENAB 0x00040000 +#define DDC_SCL_OUT 0x00080000 +#define DDC_SDA_OUT 0x00100000 +#define DDC_SCL_IN 0x00200000 +#define DDC_SDA_IN 0x00400000 +#define I2C_ENAB 0x00000020 +#define I2C_SCL_OUT 0x00000001 +#define I2C_SDA_OUT 0x00000002 +#define I2C_SCL_IN 0x00000008 +#define I2C_SDA_IN 0x00000010 + +/* initialization states */ +#define INIT2 0x20 +#define INIT3 0x04 + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + + +static void __iomem *ioaddr; + +/* The sav GPIO registers don't have individual masks for each bit + so we always have to read before writing. */ + +static void bit_savi2c_setscl(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if(val) + r |= I2C_SCL_OUT; + else + r &= ~I2C_SCL_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static void bit_savi2c_setsda(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if(val) + r |= I2C_SDA_OUT; + else + r &= ~I2C_SDA_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +/* The GPIO pins are open drain, so the pins always remain outputs. + We rely on the i2c-algo-bit routines to set the pins high before + reading the input from other chips. */ + +static int bit_savi2c_getscl(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SCL_IN)); +} + +static int bit_savi2c_getsda(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SDA_IN)); +} + +/* Configures the chip */ + +static int config_s4(struct pci_dev *dev) +{ + unsigned long cadr; + + /* map memory */ + cadr = dev->resource[0].start; + cadr &= PCI_BASE_ADDRESS_MEM_MASK; + ioaddr = ioremap_nocache(cadr, 0x0080000); + if (ioaddr) { + /* writel(0x8160, ioaddr + REG2); */ + writel(0x00000020, ioaddr + REG); + dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr); + return 0; + } + return -ENODEV; +} + +static struct i2c_algo_bit_data sav_i2c_bit_data = { + .setsda = bit_savi2c_setsda, + .setscl = bit_savi2c_setscl, + .getsda = bit_savi2c_getsda, + .getscl = bit_savi2c_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT +}; + +static struct i2c_adapter savage4_i2c_adapter = { + .owner = THIS_MODULE, + .name = "I2C Savage4 adapter", + .algo_data = &sav_i2c_bit_data, +}; + +static struct pci_device_id savage4_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) }, + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, savage4_ids); + +static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + + retval = config_s4(dev); + if (retval) + return retval; + + /* set up the sysfs linkage to our parent device */ + savage4_i2c_adapter.dev.parent = &dev->dev; + + return i2c_bit_add_bus(&savage4_i2c_adapter); +} + +static void __devexit savage4_remove(struct pci_dev *dev) +{ + i2c_bit_del_bus(&savage4_i2c_adapter); + iounmap(ioaddr); +} + +static struct pci_driver savage4_driver = { + .name = "savage4_smbus", + .id_table = savage4_ids, + .probe = savage4_probe, + .remove = __devexit_p(savage4_remove), +}; + +static int __init i2c_savage4_init(void) +{ + return pci_register_driver(&savage4_driver); +} + +static void __exit i2c_savage4_exit(void) +{ + pci_unregister_driver(&savage4_driver); +} + +MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> " + "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("Savage4 I2C/SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_savage4_init); +module_exit(i2c_savage4_exit); |