diff options
author | Nishanth Menon <nm@ti.com> | 2008-11-21 21:39:46 (GMT) |
---|---|---|
committer | Tony Lindgren <tony@atomide.com> | 2008-11-21 21:39:46 (GMT) |
commit | b6ee52c39999b2f3bcd9e26f0edf1f07599cf40e (patch) | |
tree | 9bae229905eb207fe2c01fa6b9bfb6d623b96384 /drivers/i2c | |
parent | 4574eb6892a13bc91aac8676457d46798935d653 (diff) | |
download | linux-fsl-qoriq-b6ee52c39999b2f3bcd9e26f0edf1f07599cf40e.tar.xz |
i2c-omap: FIFO handling support and broken hw workaround for i2c-omap
Based on an earlier patch from Nishant Menon:
- Transfers can use FIFO on FIFO capable devices
- Prevents errors for HSI2C if FIFO is not used
- Implemented errenous handling of STT-STP handling on SDP2430
Also merged in is a fix from Jaron Marini to fix occasional i2c
hang if OMAP_I2C_CON_STT remains asserted.
Signed-off-by: Jason P Marini <jason.marini@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 190 |
1 files changed, 150 insertions, 40 deletions
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index b0aa0f8..9ae4b74 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -55,8 +55,11 @@ #define OMAP_I2C_SCLL_REG 0x34 #define OMAP_I2C_SCLH_REG 0x38 #define OMAP_I2C_SYSTEST_REG 0x3c +#define OMAP_I2C_BUFSTAT_REG 0x40 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ +#define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ +#define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */ #define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */ #define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */ #define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */ @@ -64,7 +67,8 @@ #define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */ /* I2C Status Register (OMAP_I2C_STAT): */ -#define OMAP_I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */ +#define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */ #define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */ #define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */ #define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ @@ -78,12 +82,14 @@ /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */ #define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */ +#define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */ #define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */ +#define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */ /* I2C Configuration Register (OMAP_I2C_CON): */ #define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */ #define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */ -#define OMAP_I2C_CON_OPMODE (1 << 12) /* High Speed support */ +#define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */ #define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */ #define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */ #define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */ @@ -127,7 +133,12 @@ struct omap_i2c_dev { u8 *buf; size_t buf_len; struct i2c_adapter adapter; + u8 fifo_size; /* use as flag and value + * fifo_size==0 implies no fifo + * if set, should be trsh+1 + */ unsigned rev1:1; + unsigned b_hw:1; /* bad h/w fixes */ unsigned idle:1; u16 iestate; /* Saved interrupt register */ }; @@ -297,6 +308,14 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll); omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh); + if (dev->fifo_size) + /* Note: setup required fifo size - 1 */ + omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, + (dev->fifo_size - 1) << 8 | /* RTRSH */ + OMAP_I2C_BUF_RXFIF_CLR | + (dev->fifo_size - 1) | /* XTRSH */ + OMAP_I2C_BUF_TXFIF_CLR); + /* Take the I2C module out of reset: */ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); @@ -304,7 +323,8 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | - OMAP_I2C_IE_AL)); + OMAP_I2C_IE_AL) | ((dev->fifo_size) ? + (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0)); return 0; } @@ -351,6 +371,11 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); + /* Clear the FIFO Buffers */ + w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); + w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; + omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w); + init_completion(&dev->cmd_complete); dev->cmd_err = 0; @@ -358,17 +383,40 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, /* High speed configuration */ if (dev->speed > 400) - w |= OMAP_I2C_CON_OPMODE; + w |= OMAP_I2C_CON_OPMODE_HS; if (msg->flags & I2C_M_TEN) w |= OMAP_I2C_CON_XA; if (!(msg->flags & I2C_M_RD)) w |= OMAP_I2C_CON_TRX; - if (stop) + if (!dev->b_hw && stop) w |= OMAP_I2C_CON_STP; omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); /* + * Don't write stt and stp together on some hardware. + */ + if (dev->b_hw && stop) { + unsigned long delay = jiffies + OMAP_I2C_TIMEOUT; + u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + while (con & OMAP_I2C_CON_STT) { + con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + + /* Let the user know if i2c is in a bad state */ + if (time_after(jiffies, delay)) { + dev_err(dev->dev, "controller timed out " + "waiting for start condition to finish\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } + + w |= OMAP_I2C_CON_STP; + w &= ~OMAP_I2C_CON_STT; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); + } + + /* * REVISIT: We should abort the transfer on signals, but the bus goes * into arbitration and we're currently unable to recover from it. */ @@ -516,7 +564,7 @@ omap_i2c_isr(int this_irq, void *dev_id) struct omap_i2c_dev *dev = dev_id; u16 bits; u16 stat, w; - int count = 0; + int err, count = 0; if (dev->idle) return IRQ_NONE; @@ -531,39 +579,94 @@ omap_i2c_isr(int this_irq, void *dev_id) omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); - if (stat & OMAP_I2C_STAT_ARDY) { - omap_i2c_complete_cmd(dev, 0); - continue; + err = 0; + if (stat & OMAP_I2C_STAT_NACK) { + err |= OMAP_I2C_STAT_NACK; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, + OMAP_I2C_CON_STP); } - if (stat & OMAP_I2C_STAT_RRDY) { - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - if (dev->buf_len) { - *dev->buf++ = w; - dev->buf_len--; + if (stat & OMAP_I2C_STAT_AL) { + dev_err(dev->dev, "Arbitration lost\n"); + err |= OMAP_I2C_STAT_AL; + } + if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | + OMAP_I2C_STAT_AL)) + omap_i2c_complete_cmd(dev, err); + if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) { + u8 num_bytes = 1; + if (dev->fifo_size) { + if (stat & OMAP_I2C_STAT_RRDY) + num_bytes = dev->fifo_size; + else + num_bytes = omap_i2c_read_reg(dev, + OMAP_I2C_BUFSTAT_REG); + } + while (num_bytes) { + num_bytes--; + w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); if (dev->buf_len) { - *dev->buf++ = w >> 8; + *dev->buf++ = w; dev->buf_len--; + /* Data reg from 2430 is 8 bit wide */ + if (!cpu_is_omap2430()) { + if (dev->buf_len) { + *dev->buf++ = w >> 8; + dev->buf_len--; + } + } + } else { + if (stat & OMAP_I2C_STAT_RRDY) + dev_err(dev->dev, + "RRDY IRQ while no data" + " requested\n"); + if (stat & OMAP_I2C_STAT_RDR) + dev_err(dev->dev, + "RDR IRQ while no data" + " requested\n"); + break; } - } else - dev_err(dev->dev, "RRDY IRQ while no data " - "requested\n"); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); + } + omap_i2c_ack_stat(dev, + stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)); continue; } - if (stat & OMAP_I2C_STAT_XRDY) { - w = 0; - if (dev->buf_len) { - w = *dev->buf++; - dev->buf_len--; + if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) { + u8 num_bytes = 1; + if (dev->fifo_size) { + if (stat & OMAP_I2C_STAT_XRDY) + num_bytes = dev->fifo_size; + else + num_bytes = omap_i2c_read_reg(dev, + OMAP_I2C_BUFSTAT_REG); + } + while (num_bytes) { + num_bytes--; + w = 0; if (dev->buf_len) { - w |= *dev->buf++ << 8; + w = *dev->buf++; dev->buf_len--; + /* Data reg from 2430 is 8 bit wide */ + if (!cpu_is_omap2430()) { + if (dev->buf_len) { + w |= *dev->buf++ << 8; + dev->buf_len--; + } + } + } else { + if (stat & OMAP_I2C_STAT_XRDY) + dev_err(dev->dev, + "XRDY IRQ while no " + "data to send\n"); + if (stat & OMAP_I2C_STAT_XDR) + dev_err(dev->dev, + "XDR IRQ while no " + "data to send\n"); + break; } - } else - dev_err(dev->dev, "XRDY IRQ while no " - "data to send\n"); - omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); + omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); + } + omap_i2c_ack_stat(dev, + stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); continue; } if (stat & OMAP_I2C_STAT_ROVR) { @@ -571,18 +674,9 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->cmd_err |= OMAP_I2C_STAT_ROVR; } if (stat & OMAP_I2C_STAT_XUDF) { - dev_err(dev->dev, "Transmit overflow\n"); + dev_err(dev->dev, "Transmit underflow\n"); dev->cmd_err |= OMAP_I2C_STAT_XUDF; } - if (stat & OMAP_I2C_STAT_NACK) { - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK); - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, - OMAP_I2C_CON_STP); - } - if (stat & OMAP_I2C_STAT_AL) { - dev_err(dev->dev, "Arbitration lost\n"); - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL); - } } return count ? IRQ_HANDLED : IRQ_NONE; @@ -651,6 +745,22 @@ omap_i2c_probe(struct platform_device *pdev) if (cpu_is_omap15xx()) dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20; + if (cpu_is_omap2430()) { + u16 s; + + /* Set up the fifo size - Get total size */ + s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3; + dev->fifo_size = 0x8 << s; + + /* + * Set up notification threshold as half the total available + * size. This is to ensure that we can handle the status on int + * call back latencies. + */ + dev->fifo_size = (dev->fifo_size / 2); + dev->b_hw = 1; /* Enable hardware fixes */ + } + /* reset ASAP, clearing any IRQs */ omap_i2c_init(dev); |