Merge remote-tracking branch 'linus/master' into merge

Conflicts:
	Documentation/hwmon/ina2xx
	arch/powerpc/Kconfig
	arch/powerpc/boot/dts/b4860emu.dts
	arch/powerpc/boot/dts/b4qds.dtsi
	arch/powerpc/boot/dts/fsl/b4si-post.dtsi
	arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
	arch/powerpc/boot/dts/p1023rdb.dts
	arch/powerpc/boot/dts/t4240emu.dts
	arch/powerpc/boot/dts/t4240qds.dts
	arch/powerpc/configs/85xx/p1023_defconfig
	arch/powerpc/configs/corenet32_smp_defconfig
	arch/powerpc/configs/corenet64_smp_defconfig
	arch/powerpc/configs/mpc85xx_smp_defconfig
	arch/powerpc/include/asm/cputable.h
	arch/powerpc/include/asm/device.h
	arch/powerpc/include/asm/epapr_hcalls.h
	arch/powerpc/include/asm/kvm_host.h
	arch/powerpc/include/asm/mpic.h
	arch/powerpc/include/asm/pci.h
	arch/powerpc/include/asm/ppc-opcode.h
	arch/powerpc/include/asm/ppc_asm.h
	arch/powerpc/include/asm/reg_booke.h
	arch/powerpc/kernel/epapr_paravirt.c
	arch/powerpc/kernel/process.c
	arch/powerpc/kernel/prom.c
	arch/powerpc/kernel/setup-common.c
	arch/powerpc/kernel/setup_32.c
	arch/powerpc/kernel/setup_64.c
	arch/powerpc/kernel/smp.c
	arch/powerpc/kernel/swsusp_asm64.S
	arch/powerpc/kernel/swsusp_booke.S
	arch/powerpc/kvm/book3s_pr.c
	arch/powerpc/kvm/booke.c
	arch/powerpc/kvm/booke.h
	arch/powerpc/kvm/e500.c
	arch/powerpc/kvm/e500.h
	arch/powerpc/kvm/e500_emulate.c
	arch/powerpc/kvm/e500mc.c
	arch/powerpc/kvm/powerpc.c
	arch/powerpc/perf/e6500-pmu.c
	arch/powerpc/platforms/85xx/Kconfig
	arch/powerpc/platforms/85xx/Makefile
	arch/powerpc/platforms/85xx/b4_qds.c
	arch/powerpc/platforms/85xx/c293pcie.c
	arch/powerpc/platforms/85xx/corenet_ds.c
	arch/powerpc/platforms/85xx/corenet_ds.h
	arch/powerpc/platforms/85xx/p1023_rds.c
	arch/powerpc/platforms/85xx/p2041_rdb.c
	arch/powerpc/platforms/85xx/p3041_ds.c
	arch/powerpc/platforms/85xx/p4080_ds.c
	arch/powerpc/platforms/85xx/p5020_ds.c
	arch/powerpc/platforms/85xx/p5040_ds.c
	arch/powerpc/platforms/85xx/smp.c
	arch/powerpc/platforms/85xx/t4240_qds.c
	arch/powerpc/platforms/Kconfig
	arch/powerpc/sysdev/Makefile
	arch/powerpc/sysdev/fsl_mpic_timer_wakeup.c
	arch/powerpc/sysdev/fsl_msi.c
	arch/powerpc/sysdev/fsl_pci.c
	arch/powerpc/sysdev/fsl_pci.h
	arch/powerpc/sysdev/fsl_soc.h
	arch/powerpc/sysdev/mpic.c
	arch/powerpc/sysdev/mpic_timer.c
	drivers/Kconfig
	drivers/clk/Kconfig
	drivers/clk/clk-ppc-corenet.c
	drivers/cpufreq/Kconfig.powerpc
	drivers/cpufreq/Makefile
	drivers/cpufreq/ppc-corenet-cpufreq.c
	drivers/crypto/caam/Kconfig
	drivers/crypto/caam/Makefile
	drivers/crypto/caam/ctrl.c
	drivers/crypto/caam/desc_constr.h
	drivers/crypto/caam/intern.h
	drivers/crypto/caam/jr.c
	drivers/crypto/caam/regs.h
	drivers/dma/fsldma.c
	drivers/hwmon/ina2xx.c
	drivers/iommu/Kconfig
	drivers/iommu/fsl_pamu.c
	drivers/iommu/fsl_pamu.h
	drivers/iommu/fsl_pamu_domain.c
	drivers/iommu/fsl_pamu_domain.h
	drivers/misc/Makefile
	drivers/mmc/card/block.c
	drivers/mmc/core/core.c
	drivers/mmc/host/sdhci-esdhc.h
	drivers/mmc/host/sdhci-pltfm.c
	drivers/mtd/nand/fsl_ifc_nand.c
	drivers/net/ethernet/freescale/gianfar.c
	drivers/net/ethernet/freescale/gianfar.h
	drivers/net/ethernet/freescale/gianfar_ethtool.c
	drivers/net/phy/at803x.c
	drivers/net/phy/phy_device.c
	drivers/net/phy/vitesse.c
	drivers/pci/msi.c
	drivers/staging/Kconfig
	drivers/staging/Makefile
	drivers/uio/Kconfig
	drivers/uio/Makefile
	drivers/uio/uio.c
	drivers/usb/host/ehci-fsl.c
	drivers/vfio/Kconfig
	drivers/vfio/Makefile
	include/crypto/algapi.h
	include/linux/iommu.h
	include/linux/mmc/sdhci.h
	include/linux/msi.h
	include/linux/netdev_features.h
	include/linux/phy.h
	include/linux/skbuff.h
	include/net/ip.h
	include/uapi/linux/vfio.h
	net/core/ethtool.c
	net/ipv4/route.c
	net/ipv6/route.c

61 files changed, 5281 insertions, 1995 deletions

diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index e380c6e..7b7ea32 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -75,7 +75,6 @@ config I2C_HELPER_AUTO
 
 config I2C_SMBUS
 	tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
-	depends on GENERIC_HARDIRQS
 	help
 	  Say Y here if you want support for SMBus extensions to the I2C
 	  specification. At the moment, the only supported extension is
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 631736e..3b26129 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -108,13 +108,15 @@ config I2C_I801
 	    Lynx Point-LP (PCH)
 	    Avoton (SOC)
 	    Wellsburg (PCH)
+	    Coleto Creek (PCH)
+	    Wildcat Point-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
 
 config I2C_ISCH
 	tristate "Intel SCH SMBus 1.0"
-	depends on PCI && GENERIC_HARDIRQS
+	depends on PCI
 	select LPC_SCH
 	help
 	  Say Y here if you want to use SMBus controller on the Intel SCH
@@ -150,6 +152,7 @@ config I2C_PIIX4
 	    ATI SB700/SP5100
 	    ATI SB800
 	    AMD Hudson-2
+	    AMD CZ
 	    Serverworks OSB4
 	    Serverworks CSB5
 	    Serverworks CSB6
@@ -343,6 +346,16 @@ config I2C_BCM2835
 	  This support is also available as a module.  If so, the module
 	  will be called i2c-bcm2835.
 
+config I2C_BCM_KONA
+	tristate "BCM Kona I2C adapter"
+	depends on ARCH_BCM_MOBILE
+	default y
+	help
+	  If you say yes to this option, support will be included for the
+	  I2C interface on the Broadcom Kona family of processors.
+
+	  If you do not need KONA I2C inteface, say N.
+
 config I2C_BLACKFIN_TWI
 	tristate "Blackfin TWI I2C support"
 	depends on BLACKFIN
@@ -383,7 +396,7 @@ config I2C_CPM
 
 config I2C_DAVINCI
 	tristate "DaVinci I2C driver"
-	depends on ARCH_DAVINCI
+	depends on ARCH_DAVINCI || ARCH_KEYSTONE
 	help
 	  Support for TI DaVinci I2C controller driver.
 
@@ -434,6 +447,13 @@ config I2C_EG20T
 	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
 	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
+config I2C_EXYNOS5
+	tristate "Exynos5 high-speed I2C driver"
+	depends on ARCH_EXYNOS5 && OF
+	help
+	  Say Y here to include support for high-speed I2C controller in the
+	  Exynos5 based Samsung SoCs.
+
 config I2C_GPIO
 	tristate "GPIO-based bitbanging I2C"
 	depends on GPIOLIB
@@ -474,16 +494,6 @@ config I2C_IMX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-imx.
 
-config I2C_INTEL_MID
-	tristate "Intel Moorestown/Medfield Platform I2C controller"
-	depends on PCI
-	help
-	  Say Y here if you have an Intel Moorestown/Medfield platform I2C
-	  controller.
-
-	  This support is also available as a module. If so, the module
-	  will be called i2c-intel-mid.
-
 config I2C_IOP3XX
 	tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface"
 	depends on ARCH_IOP32X || ARCH_IOP33X || ARCH_IXP4XX || ARCH_IOP13XX
@@ -494,6 +504,16 @@ config I2C_IOP3XX
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-iop3xx.
 
+config I2C_KEMPLD
+	tristate "Kontron COM I2C Controller"
+	depends on MFD_KEMPLD
+	help
+	  This enables support for the I2C bus interface on some Kontron ETX
+	  and COMexpress (ETXexpress) modules.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called i2c-kempld.
+
 config I2C_MPC
 	tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
 	depends on PPC
@@ -507,10 +527,11 @@ config I2C_MPC
 
 config I2C_MV64XXX
 	tristate "Marvell mv64xxx I2C Controller"
-	depends on (MV64X60 || PLAT_ORION)
+	depends on (MV64X60 || PLAT_ORION || ARCH_SUNXI)
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Marvell 64xxx line of host bridges.
+	  This driver is also used for Allwinner SoCs I2C controllers.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mv64xxx.
@@ -543,7 +564,6 @@ config I2C_NUC900
 
 config I2C_OCORES
 	tristate "OpenCores I2C Controller"
-	depends on GENERIC_HARDIRQS
 	help
 	  If you say yes to this option, support will be included for the
 	  OpenCores I2C controller. For details see
@@ -663,7 +683,7 @@ config I2C_SH7760
 
 config I2C_SH_MOBILE
 	tristate "SuperH Mobile I2C Controller"
-	depends on SUPERH || ARCH_SHMOBILE
+	depends on SUPERH || ARM || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  built-in I2C interface on the Renesas SH-Mobile processor.
@@ -685,7 +705,7 @@ config I2C_SIMTEC
 
 config I2C_SIRF
 	tristate "CSR SiRFprimaII I2C interface"
-	depends on ARCH_PRIMA2
+	depends on ARCH_SIRF
 	help
 	  If you say yes to this option, support will be included for the
 	  CSR SiRFprimaII I2C interface.
@@ -693,6 +713,16 @@ config I2C_SIRF
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-sirf.
 
+config I2C_ST
+	tristate "STMicroelectronics SSC I2C support"
+	depends on ARCH_STI
+	help
+	  Enable this option to add support for STMicroelectronics SoCs
+	  hardware SSC (Synchronous Serial Controller) as an I2C controller.
+
+	  This driver can also be built as module. If so, the module
+	  will be called i2c-st.
+
 config I2C_STU300
 	tristate "ST Microelectronics DDC I2C interface"
 	depends on MACH_U300
@@ -724,9 +754,19 @@ config I2C_VERSATILE
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-versatile.
 
+config I2C_WMT
+	tristate "Wondermedia WM8xxx SoC I2C bus support"
+	depends on ARCH_VT8500
+	help
+	  Say yes if you want to support the I2C bus on Wondermedia 8xxx-series
+	  SoCs.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-wmt.
+
 config I2C_OCTEON
 	tristate "Cavium OCTEON I2C bus support"
-	depends on CPU_CAVIUM_OCTEON
+	depends on CAVIUM_OCTEON_SOC
 	help
 	  Say yes if you want to support the I2C serial bus on Cavium
 	  OCTEON SOC.
@@ -756,7 +796,7 @@ config I2C_XLR
 
 config I2C_RCAR
 	tristate "Renesas R-Car I2C Controller"
-	depends on ARCH_SHMOBILE && I2C
+	depends on ARM || COMPILE_TEST
 	help
 	  If you say yes to this option, support will be included for the
 	  R-Car I2C controller.
@@ -778,7 +818,7 @@ config I2C_DIOLAN_U2C
 
 config I2C_PARPORT
 	tristate "Parallel port adapter"
-	depends on PARPORT && GENERIC_HARDIRQS
+	depends on PARPORT
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
@@ -803,7 +843,6 @@ config I2C_PARPORT
 
 config I2C_PARPORT_LIGHT
 	tristate "Parallel port adapter (light)"
-	depends on GENERIC_HARDIRQS
 	select I2C_ALGOBIT
 	select I2C_SMBUS
 	help
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 8f4fc23..c73eb0e 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -42,12 +42,13 @@ i2c-designware-platform-objs := i2c-designware-platdrv.o
 obj-$(CONFIG_I2C_DESIGNWARE_PCI)	+= i2c-designware-pci.o
 i2c-designware-pci-objs := i2c-designware-pcidrv.o
 obj-$(CONFIG_I2C_EG20T)		+= i2c-eg20t.o
+obj-$(CONFIG_I2C_EXYNOS5)	+= i2c-exynos5.o
 obj-$(CONFIG_I2C_GPIO)		+= i2c-gpio.o
 obj-$(CONFIG_I2C_HIGHLANDER)	+= i2c-highlander.o
 obj-$(CONFIG_I2C_IBM_IIC)	+= i2c-ibm_iic.o
 obj-$(CONFIG_I2C_IMX)		+= i2c-imx.o
-obj-$(CONFIG_I2C_INTEL_MID)	+= i2c-intel-mid.o
 obj-$(CONFIG_I2C_IOP3XX)	+= i2c-iop3xx.o
+obj-$(CONFIG_I2C_KEMPLD)	+= i2c-kempld.o
 obj-$(CONFIG_I2C_MPC)		+= i2c-mpc.o
 obj-$(CONFIG_I2C_MV64XXX)	+= i2c-mv64xxx.o
 obj-$(CONFIG_I2C_MXS)		+= i2c-mxs.o
@@ -68,9 +69,11 @@ obj-$(CONFIG_I2C_SH7760)	+= i2c-sh7760.o
 obj-$(CONFIG_I2C_SH_MOBILE)	+= i2c-sh_mobile.o
 obj-$(CONFIG_I2C_SIMTEC)	+= i2c-simtec.o
 obj-$(CONFIG_I2C_SIRF)		+= i2c-sirf.o
+obj-$(CONFIG_I2C_ST)		+= i2c-st.o
 obj-$(CONFIG_I2C_STU300)	+= i2c-stu300.o
 obj-$(CONFIG_I2C_TEGRA)		+= i2c-tegra.o
 obj-$(CONFIG_I2C_VERSATILE)	+= i2c-versatile.o
+obj-$(CONFIG_I2C_WMT)		+= i2c-wmt.o
 obj-$(CONFIG_I2C_OCTEON)	+= i2c-octeon.o
 obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
@@ -86,6 +89,7 @@ obj-$(CONFIG_I2C_VIPERBOARD)	+= i2c-viperboard.o
 
 # Other I2C/SMBus bus drivers
 obj-$(CONFIG_I2C_ACORN)		+= i2c-acorn.o
+obj-$(CONFIG_I2C_BCM_KONA)	+= i2c-bcm-kona.o
 obj-$(CONFIG_I2C_ELEKTOR)	+= i2c-elektor.o
 obj-$(CONFIG_I2C_PCA_ISA)	+= i2c-pca-isa.o
 obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 6bb839b..8edba9d 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -28,7 +28,6 @@
 #include <linux/module.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/platform_data/dma-atmel.h>
@@ -372,7 +371,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
 		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
 
-	INIT_COMPLETION(dev->cmd_complete);
+	reinit_completion(&dev->cmd_complete);
 	dev->transfer_status = 0;
 
 	if (!dev->buf_len) {
@@ -775,8 +774,6 @@ static int at91_twi_probe(struct platform_device *pdev)
 		return rc;
 	}
 
-	of_i2c_register_devices(&dev->adapter);
-
 	dev_info(dev->dev, "AT91 i2c bus driver.\n");
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-bcm-kona.c b/drivers/i2c/busses/i2c-bcm-kona.c
new file mode 100644
index 0000000..18a74a6
--- /dev/null
+++ b/drivers/i2c/busses/i2c-bcm-kona.c
@@ -0,0 +1,908 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/* Hardware register offsets and field defintions */
+#define CS_OFFSET				0x00000020
+#define CS_ACK_SHIFT				3
+#define CS_ACK_MASK				0x00000008
+#define CS_ACK_CMD_GEN_START			0x00000000
+#define CS_ACK_CMD_GEN_RESTART			0x00000001
+#define CS_CMD_SHIFT				1
+#define CS_CMD_CMD_NO_ACTION			0x00000000
+#define CS_CMD_CMD_START_RESTART		0x00000001
+#define CS_CMD_CMD_STOP				0x00000002
+#define CS_EN_SHIFT				0
+#define CS_EN_CMD_ENABLE_BSC			0x00000001
+
+#define TIM_OFFSET				0x00000024
+#define TIM_PRESCALE_SHIFT			6
+#define TIM_P_SHIFT				3
+#define TIM_NO_DIV_SHIFT			2
+#define TIM_DIV_SHIFT				0
+
+#define DAT_OFFSET				0x00000028
+
+#define TOUT_OFFSET				0x0000002c
+
+#define TXFCR_OFFSET				0x0000003c
+#define TXFCR_FIFO_FLUSH_MASK			0x00000080
+#define TXFCR_FIFO_EN_MASK			0x00000040
+
+#define IER_OFFSET				0x00000044
+#define IER_READ_COMPLETE_INT_MASK		0x00000010
+#define IER_I2C_INT_EN_MASK			0x00000008
+#define IER_FIFO_INT_EN_MASK			0x00000002
+#define IER_NOACK_EN_MASK			0x00000001
+
+#define ISR_OFFSET				0x00000048
+#define ISR_RESERVED_MASK			0xffffff60
+#define ISR_CMDBUSY_MASK			0x00000080
+#define ISR_READ_COMPLETE_MASK			0x00000010
+#define ISR_SES_DONE_MASK			0x00000008
+#define ISR_ERR_MASK				0x00000004
+#define ISR_TXFIFOEMPTY_MASK			0x00000002
+#define ISR_NOACK_MASK				0x00000001
+
+#define CLKEN_OFFSET				0x0000004C
+#define CLKEN_AUTOSENSE_OFF_MASK		0x00000080
+#define CLKEN_M_SHIFT				4
+#define CLKEN_N_SHIFT				1
+#define CLKEN_CLKEN_MASK			0x00000001
+
+#define FIFO_STATUS_OFFSET			0x00000054
+#define FIFO_STATUS_RXFIFO_EMPTY_MASK		0x00000004
+#define FIFO_STATUS_TXFIFO_EMPTY_MASK		0x00000010
+
+#define HSTIM_OFFSET				0x00000058
+#define HSTIM_HS_MODE_MASK			0x00008000
+#define HSTIM_HS_HOLD_SHIFT			10
+#define HSTIM_HS_HIGH_PHASE_SHIFT		5
+#define HSTIM_HS_SETUP_SHIFT			0
+
+#define PADCTL_OFFSET				0x0000005c
+#define PADCTL_PAD_OUT_EN_MASK			0x00000004
+
+#define RXFCR_OFFSET				0x00000068
+#define RXFCR_NACK_EN_SHIFT			7
+#define RXFCR_READ_COUNT_SHIFT			0
+#define RXFIFORDOUT_OFFSET			0x0000006c
+
+/* Locally used constants */
+#define MAX_RX_FIFO_SIZE		64U /* bytes */
+#define MAX_TX_FIFO_SIZE		64U /* bytes */
+
+#define STD_EXT_CLK_FREQ		13000000UL
+#define HS_EXT_CLK_FREQ			104000000UL
+
+#define MASTERCODE			0x08 /* Mastercodes are 0000_1xxxb */
+
+#define I2C_TIMEOUT			100 /* msecs */
+
+/* Operations that can be commanded to the controller */
+enum bcm_kona_cmd_t {
+	BCM_CMD_NOACTION = 0,
+	BCM_CMD_START,
+	BCM_CMD_RESTART,
+	BCM_CMD_STOP,
+};
+
+enum bus_speed_index {
+	BCM_SPD_100K = 0,
+	BCM_SPD_400K,
+	BCM_SPD_1MHZ,
+};
+
+enum hs_bus_speed_index {
+	BCM_SPD_3P4MHZ = 0,
+};
+
+/* Internal divider settings for standard mode, fast mode and fast mode plus */
+struct bus_speed_cfg {
+	uint8_t time_m;		/* Number of cycles for setup time */
+	uint8_t time_n;		/* Number of cycles for hold time */
+	uint8_t prescale;	/* Prescale divider */
+	uint8_t time_p;		/* Timing coefficient */
+	uint8_t no_div;		/* Disable clock divider */
+	uint8_t time_div;	/* Post-prescale divider */
+};
+
+/* Internal divider settings for high-speed mode */
+struct hs_bus_speed_cfg {
+	uint8_t hs_hold;	/* Number of clock cycles SCL stays low until
+				   the end of bit period */
+	uint8_t hs_high_phase;	/* Number of clock cycles SCL stays high
+				   before it falls */
+	uint8_t hs_setup;	/* Number of clock cycles SCL stays low
+				   before it rises  */
+	uint8_t prescale;	/* Prescale divider */
+	uint8_t time_p;		/* Timing coefficient */
+	uint8_t no_div;		/* Disable clock divider */
+	uint8_t time_div;	/* Post-prescale divider */
+};
+
+static const struct bus_speed_cfg std_cfg_table[] = {
+	[BCM_SPD_100K] = {0x01, 0x01, 0x03, 0x06, 0x00, 0x02},
+	[BCM_SPD_400K] = {0x05, 0x01, 0x03, 0x05, 0x01, 0x02},
+	[BCM_SPD_1MHZ] = {0x01, 0x01, 0x03, 0x01, 0x01, 0x03},
+};
+
+static const struct hs_bus_speed_cfg hs_cfg_table[] = {
+	[BCM_SPD_3P4MHZ] = {0x01, 0x08, 0x14, 0x00, 0x06, 0x01, 0x00},
+};
+
+struct bcm_kona_i2c_dev {
+	struct device *device;
+
+	void __iomem *base;
+	int irq;
+	struct clk *external_clk;
+
+	struct i2c_adapter adapter;
+
+	struct completion done;
+
+	const struct bus_speed_cfg *std_cfg;
+	const struct hs_bus_speed_cfg *hs_cfg;
+};
+
+static void bcm_kona_i2c_send_cmd_to_ctrl(struct bcm_kona_i2c_dev *dev,
+					  enum bcm_kona_cmd_t cmd)
+{
+	dev_dbg(dev->device, "%s, %d\n", __func__, cmd);
+
+	switch (cmd) {
+	case BCM_CMD_NOACTION:
+		writel((CS_CMD_CMD_NO_ACTION << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_START:
+		writel((CS_ACK_CMD_GEN_START << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_RESTART:
+		writel((CS_ACK_CMD_GEN_RESTART << CS_ACK_SHIFT) |
+		       (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	case BCM_CMD_STOP:
+		writel((CS_CMD_CMD_STOP << CS_CMD_SHIFT) |
+		       (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT),
+		       dev->base + CS_OFFSET);
+		break;
+
+	default:
+		dev_err(dev->device, "Unknown command %d\n", cmd);
+	}
+}
+
+static void bcm_kona_i2c_enable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) | CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_disable_clock(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static irqreturn_t bcm_kona_i2c_isr(int irq, void *devid)
+{
+	struct bcm_kona_i2c_dev *dev = devid;
+	uint32_t status = readl(dev->base + ISR_OFFSET);
+
+	if ((status & ~ISR_RESERVED_MASK) == 0)
+		return IRQ_NONE;
+
+	/* Must flush the TX FIFO when NAK detected */
+	if (status & ISR_NOACK_MASK)
+		writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+		       dev->base + TXFCR_OFFSET);
+
+	writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET);
+	complete_all(&dev->done);
+
+	return IRQ_HANDLED;
+}
+
+/* Wait for ISR_CMDBUSY_MASK to go low before writing to CS, DAT, or RCD */
+static int bcm_kona_i2c_wait_if_busy(struct bcm_kona_i2c_dev *dev)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT);
+
+	while (readl(dev->base + ISR_OFFSET) & ISR_CMDBUSY_MASK)
+		if (time_after(jiffies, timeout)) {
+			dev_err(dev->device, "CMDBUSY timeout\n");
+			return -ETIMEDOUT;
+		}
+
+	return 0;
+}
+
+/* Send command to I2C bus */
+static int bcm_kona_send_i2c_cmd(struct bcm_kona_i2c_dev *dev,
+				 enum bcm_kona_cmd_t cmd)
+{
+	int rc;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+
+	/* Make sure the hardware is ready */
+	rc = bcm_kona_i2c_wait_if_busy(dev);
+	if (rc < 0)
+		return rc;
+
+	/* Unmask the session done interrupt */
+	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);
+
+	/* Mark as incomplete before sending the command */
+	reinit_completion(&dev->done);
+
+	/* Send the command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, cmd);
+
+	/* Wait for transaction to finish or timeout */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_err(dev->device, "controller timed out\n");
+		rc = -ETIMEDOUT;
+	}
+
+	/* Clear command */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	return rc;
+}
+
+/* Read a single RX FIFO worth of data from the i2c bus */
+static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev,
+					 uint8_t *buf, unsigned int len,
+					 unsigned int last_byte_nak)
+{
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+
+	/* Mark as incomplete before starting the RX FIFO */
+	reinit_completion(&dev->done);
+
+	/* Unmask the read complete interrupt */
+	writel(IER_READ_COMPLETE_INT_MASK, dev->base + IER_OFFSET);
+
+	/* Start the RX FIFO */
+	writel((last_byte_nak << RXFCR_NACK_EN_SHIFT) |
+	       (len << RXFCR_READ_COUNT_SHIFT),
+		dev->base + RXFCR_OFFSET);
+
+	/* Wait for FIFO read to complete */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_err(dev->device, "RX FIFO time out\n");
+		return -EREMOTEIO;
+	}
+
+	/* Read data from FIFO */
+	for (; len > 0; len--, buf++)
+		*buf = readl(dev->base + RXFIFORDOUT_OFFSET);
+
+	return 0;
+}
+
+/* Read any amount of data using the RX FIFO from the i2c bus */
+static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev,
+				  struct i2c_msg *msg)
+{
+	unsigned int bytes_to_read = MAX_RX_FIFO_SIZE;
+	unsigned int last_byte_nak = 0;
+	unsigned int bytes_read = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_read < msg->len) {
+		if (msg->len - bytes_read <= MAX_RX_FIFO_SIZE) {
+			last_byte_nak = 1; /* NAK last byte of transfer */
+			bytes_to_read = msg->len - bytes_read;
+		}
+
+		rc = bcm_kona_i2c_read_fifo_single(dev, tmp_buf, bytes_to_read,
+						   last_byte_nak);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_read += bytes_to_read;
+		tmp_buf += bytes_to_read;
+	}
+
+	return 0;
+}
+
+/* Write a single byte of data to the i2c bus */
+static int bcm_kona_i2c_write_byte(struct bcm_kona_i2c_dev *dev, uint8_t data,
+				   unsigned int nak_expected)
+{
+	int rc;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+	unsigned int nak_received;
+
+	/* Make sure the hardware is ready */
+	rc = bcm_kona_i2c_wait_if_busy(dev);
+	if (rc < 0)
+		return rc;
+
+	/* Clear pending session done interrupt */
+	writel(ISR_SES_DONE_MASK, dev->base + ISR_OFFSET);
+
+	/* Unmask the session done interrupt */
+	writel(IER_I2C_INT_EN_MASK, dev->base + IER_OFFSET);
+
+	/* Mark as incomplete before sending the data */
+	reinit_completion(&dev->done);
+
+	/* Send one byte of data */
+	writel(data, dev->base + DAT_OFFSET);
+
+	/* Wait for byte to be written */
+	time_left = wait_for_completion_timeout(&dev->done, time_left);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	if (!time_left) {
+		dev_dbg(dev->device, "controller timed out\n");
+		return -ETIMEDOUT;
+	}
+
+	nak_received = readl(dev->base + CS_OFFSET) & CS_ACK_MASK ? 1 : 0;
+
+	if (nak_received ^ nak_expected) {
+		dev_dbg(dev->device, "unexpected NAK/ACK\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+/* Write a single TX FIFO worth of data to the i2c bus */
+static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev,
+					  uint8_t *buf, unsigned int len)
+{
+	int k;
+	unsigned long time_left = msecs_to_jiffies(I2C_TIMEOUT);
+	unsigned int fifo_status;
+
+	/* Mark as incomplete before sending data to the TX FIFO */
+	reinit_completion(&dev->done);
+
+	/* Unmask the fifo empty and nak interrupt */
+	writel(IER_FIFO_INT_EN_MASK | IER_NOACK_EN_MASK,
+	       dev->base + IER_OFFSET);
+
+	/* Disable IRQ to load a FIFO worth of data without interruption */
+	disable_irq(dev->irq);
+
+	/* Write data into FIFO */
+	for (k = 0; k < len; k++)
+		writel(buf[k], (dev->base + DAT_OFFSET));
+
+	/* Enable IRQ now that data has been loaded */
+	enable_irq(dev->irq);
+
+	/* Wait for FIFO to empty */
+	do {
+		time_left = wait_for_completion_timeout(&dev->done, time_left);
+		fifo_status = readl(dev->base + FIFO_STATUS_OFFSET);
+	} while (time_left && !(fifo_status & FIFO_STATUS_TXFIFO_EMPTY_MASK));
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	/* Check if there was a NAK */
+	if (readl(dev->base + CS_OFFSET) & CS_ACK_MASK) {
+		dev_err(dev->device, "unexpected NAK\n");
+		return -EREMOTEIO;
+	}
+
+	/* Check if a timeout occured */
+	if (!time_left) {
+		dev_err(dev->device, "completion timed out\n");
+		return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+
+/* Write any amount of data using TX FIFO to the i2c bus */
+static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev,
+				   struct i2c_msg *msg)
+{
+	unsigned int bytes_to_write = MAX_TX_FIFO_SIZE;
+	unsigned int bytes_written = 0;
+	int rc;
+
+	uint8_t *tmp_buf = msg->buf;
+
+	while (bytes_written < msg->len) {
+		if (msg->len - bytes_written <= MAX_TX_FIFO_SIZE)
+			bytes_to_write = msg->len - bytes_written;
+
+		rc = bcm_kona_i2c_write_fifo_single(dev, tmp_buf,
+						    bytes_to_write);
+		if (rc < 0)
+			return -EREMOTEIO;
+
+		bytes_written += bytes_to_write;
+		tmp_buf += bytes_to_write;
+	}
+
+	return 0;
+}
+
+/* Send i2c address */
+static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev,
+				     struct i2c_msg *msg)
+{
+	unsigned char addr;
+
+	if (msg->flags & I2C_M_TEN) {
+		/* First byte is 11110XX0 where XX is upper 2 bits */
+		addr = 0xF0 | ((msg->addr & 0x300) >> 7);
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		/* Second byte is the remaining 8 bits */
+		addr = msg->addr & 0xFF;
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+
+		if (msg->flags & I2C_M_RD) {
+			/* For read, send restart command */
+			if (bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART) < 0)
+				return -EREMOTEIO;
+
+			/* Then re-send the first byte with the read bit set */
+			addr = 0xF0 | ((msg->addr & 0x300) >> 7) | 0x01;
+			if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+				return -EREMOTEIO;
+		}
+	} else {
+		addr = msg->addr << 1;
+
+		if (msg->flags & I2C_M_RD)
+			addr |= 1;
+
+		if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0)
+			return -EREMOTEIO;
+	}
+
+	return 0;
+}
+
+static void bcm_kona_i2c_enable_autosense(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_AUTOSENSE_OFF_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev)
+{
+	writel(readl(dev->base + HSTIM_OFFSET) & ~HSTIM_HS_MODE_MASK,
+	       dev->base + HSTIM_OFFSET);
+
+	writel((dev->std_cfg->prescale << TIM_PRESCALE_SHIFT) |
+	       (dev->std_cfg->time_p << TIM_P_SHIFT) |
+	       (dev->std_cfg->no_div << TIM_NO_DIV_SHIFT) |
+	       (dev->std_cfg->time_div	<< TIM_DIV_SHIFT),
+	       dev->base + TIM_OFFSET);
+
+	writel((dev->std_cfg->time_m << CLKEN_M_SHIFT) |
+	       (dev->std_cfg->time_n << CLKEN_N_SHIFT) |
+	       CLKEN_CLKEN_MASK,
+	       dev->base + CLKEN_OFFSET);
+}
+
+static void bcm_kona_i2c_config_timing_hs(struct bcm_kona_i2c_dev *dev)
+{
+	writel((dev->hs_cfg->prescale << TIM_PRESCALE_SHIFT) |
+	       (dev->hs_cfg->time_p << TIM_P_SHIFT) |
+	       (dev->hs_cfg->no_div << TIM_NO_DIV_SHIFT) |
+	       (dev->hs_cfg->time_div << TIM_DIV_SHIFT),
+	       dev->base + TIM_OFFSET);
+
+	writel((dev->hs_cfg->hs_hold << HSTIM_HS_HOLD_SHIFT) |
+	       (dev->hs_cfg->hs_high_phase << HSTIM_HS_HIGH_PHASE_SHIFT) |
+	       (dev->hs_cfg->hs_setup << HSTIM_HS_SETUP_SHIFT),
+	       dev->base + HSTIM_OFFSET);
+
+	writel(readl(dev->base + HSTIM_OFFSET) | HSTIM_HS_MODE_MASK,
+	       dev->base + HSTIM_OFFSET);
+}
+
+static int bcm_kona_i2c_switch_to_hs(struct bcm_kona_i2c_dev *dev)
+{
+	int rc;
+
+	/* Send mastercode at standard speed */
+	rc = bcm_kona_i2c_write_byte(dev, MASTERCODE, 1);
+	if (rc < 0) {
+		pr_err("High speed handshake failed\n");
+		return rc;
+	}
+
+	/* Configure external clock to higher frequency */
+	rc = clk_set_rate(dev->external_clk, HS_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Reconfigure internal dividers */
+	bcm_kona_i2c_config_timing_hs(dev);
+
+	/* Send a restart command */
+	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
+	if (rc < 0)
+		dev_err(dev->device, "High speed restart command failed\n");
+
+	return rc;
+}
+
+static int bcm_kona_i2c_switch_to_std(struct bcm_kona_i2c_dev *dev)
+{
+	int rc;
+
+	/* Reconfigure internal dividers */
+	bcm_kona_i2c_config_timing(dev);
+
+	/* Configure external clock to lower frequency */
+	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+	}
+
+	return rc;
+}
+
+/* Master transfer function */
+static int bcm_kona_i2c_xfer(struct i2c_adapter *adapter,
+			     struct i2c_msg msgs[], int num)
+{
+	struct bcm_kona_i2c_dev *dev = i2c_get_adapdata(adapter);
+	struct i2c_msg *pmsg;
+	int rc = 0;
+	int i;
+
+	rc = clk_prepare_enable(dev->external_clk);
+	if (rc) {
+		dev_err(dev->device, "%s: peri clock enable failed. err %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Enable pad output */
+	writel(0, dev->base + PADCTL_OFFSET);
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Send start command */
+	rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_START);
+	if (rc < 0) {
+		dev_err(dev->device, "Start command failed rc = %d\n", rc);
+		goto xfer_disable_pad;
+	}
+
+	/* Switch to high speed if applicable */
+	if (dev->hs_cfg) {
+		rc = bcm_kona_i2c_switch_to_hs(dev);
+		if (rc < 0)
+			goto xfer_send_stop;
+	}
+
+	/* Loop through all messages */
+	for (i = 0; i < num; i++) {
+		pmsg = &msgs[i];
+
+		/* Send restart for subsequent messages */
+		if ((i != 0) && ((pmsg->flags & I2C_M_NOSTART) == 0)) {
+			rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART);
+			if (rc < 0) {
+				dev_err(dev->device,
+					"restart cmd failed rc = %d\n", rc);
+					goto xfer_send_stop;
+			}
+		}
+
+		/* Send slave address */
+		if (!(pmsg->flags & I2C_M_NOSTART)) {
+			rc = bcm_kona_i2c_do_addr(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device,
+					"NAK from addr %2.2x msg#%d rc = %d\n",
+					pmsg->addr, i, rc);
+				goto xfer_send_stop;
+			}
+		}
+
+		/* Perform data transfer */
+		if (pmsg->flags & I2C_M_RD) {
+			rc = bcm_kona_i2c_read_fifo(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device, "read failure\n");
+				goto xfer_send_stop;
+			}
+		} else {
+			rc = bcm_kona_i2c_write_fifo(dev, pmsg);
+			if (rc < 0) {
+				dev_err(dev->device, "write failure");
+				goto xfer_send_stop;
+			}
+		}
+	}
+
+	rc = num;
+
+xfer_send_stop:
+	/* Send a STOP command */
+	bcm_kona_send_i2c_cmd(dev, BCM_CMD_STOP);
+
+	/* Return from high speed if applicable */
+	if (dev->hs_cfg) {
+		int hs_rc = bcm_kona_i2c_switch_to_std(dev);
+
+		if (hs_rc)
+			rc = hs_rc;
+	}
+
+xfer_disable_pad:
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+
+	/* Stop internal clock */
+	bcm_kona_i2c_disable_clock(dev);
+
+	clk_disable_unprepare(dev->external_clk);
+
+	return rc;
+}
+
+static uint32_t bcm_kona_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR |
+	    I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm bcm_algo = {
+	.master_xfer = bcm_kona_i2c_xfer,
+	.functionality = bcm_kona_i2c_functionality,
+};
+
+static int bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev)
+{
+	unsigned int bus_speed;
+	int ret = of_property_read_u32(dev->device->of_node, "clock-frequency",
+				       &bus_speed);
+	if (ret < 0) {
+		dev_err(dev->device, "missing clock-frequency property\n");
+		return -ENODEV;
+	}
+
+	switch (bus_speed) {
+	case 100000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
+		break;
+	case 400000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_400K];
+		break;
+	case 1000000:
+		dev->std_cfg = &std_cfg_table[BCM_SPD_1MHZ];
+		break;
+	case 3400000:
+		/* Send mastercode at 100k */
+		dev->std_cfg = &std_cfg_table[BCM_SPD_100K];
+		dev->hs_cfg = &hs_cfg_table[BCM_SPD_3P4MHZ];
+		break;
+	default:
+		pr_err("%d hz bus speed not supported\n", bus_speed);
+		pr_err("Valid speeds are 100khz, 400khz, 1mhz, and 3.4mhz\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int bcm_kona_i2c_probe(struct platform_device *pdev)
+{
+	int rc = 0;
+	struct bcm_kona_i2c_dev *dev;
+	struct i2c_adapter *adap;
+	struct resource *iomem;
+
+	/* Allocate memory for private data structure */
+	dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
+	if (!dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, dev);
+	dev->device = &pdev->dev;
+	init_completion(&dev->done);
+
+	/* Map hardware registers */
+	iomem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	dev->base = devm_ioremap_resource(dev->device, iomem);
+	if (IS_ERR(dev->base))
+		return -ENOMEM;
+
+	/* Get and enable external clock */
+	dev->external_clk = devm_clk_get(dev->device, NULL);
+	if (IS_ERR(dev->external_clk)) {
+		dev_err(dev->device, "couldn't get clock\n");
+		return -ENODEV;
+	}
+
+	rc = clk_set_rate(dev->external_clk, STD_EXT_CLK_FREQ);
+	if (rc) {
+		dev_err(dev->device, "%s: clk_set_rate returned %d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	rc = clk_prepare_enable(dev->external_clk);
+	if (rc) {
+		dev_err(dev->device, "couldn't enable clock\n");
+		return rc;
+	}
+
+	/* Parse bus speed */
+	rc = bcm_kona_i2c_assign_bus_speed(dev);
+	if (rc)
+		goto probe_disable_clk;
+
+	/* Enable internal clocks */
+	bcm_kona_i2c_enable_clock(dev);
+
+	/* Configure internal dividers */
+	bcm_kona_i2c_config_timing(dev);
+
+	/* Disable timeout */
+	writel(0, dev->base + TOUT_OFFSET);
+
+	/* Enable autosense */
+	bcm_kona_i2c_enable_autosense(dev);
+
+	/* Enable TX FIFO */
+	writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK,
+	       dev->base + TXFCR_OFFSET);
+
+	/* Mask all interrupts */
+	writel(0, dev->base + IER_OFFSET);
+
+	/* Clear all pending interrupts */
+	writel(ISR_CMDBUSY_MASK |
+	       ISR_READ_COMPLETE_MASK |
+	       ISR_SES_DONE_MASK |
+	       ISR_ERR_MASK |
+	       ISR_TXFIFOEMPTY_MASK |
+	       ISR_NOACK_MASK,
+	       dev->base + ISR_OFFSET);
+
+	/* Get the interrupt number */
+	dev->irq = platform_get_irq(pdev, 0);
+	if (dev->irq < 0) {
+		dev_err(dev->device, "no irq resource\n");
+		rc = -ENODEV;
+		goto probe_disable_clk;
+	}
+
+	/* register the ISR handler */
+	rc = devm_request_irq(&pdev->dev, dev->irq, bcm_kona_i2c_isr,
+			      IRQF_SHARED, pdev->name, dev);
+	if (rc) {
+		dev_err(dev->device, "failed to request irq %i\n", dev->irq);
+		goto probe_disable_clk;
+	}
+
+	/* Enable the controller but leave it idle */
+	bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION);
+
+	/* Disable pad output */
+	writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET);
+
+	/* Disable internal clock */
+	bcm_kona_i2c_disable_clock(dev);
+
+	/* Disable external clock */
+	clk_disable_unprepare(dev->external_clk);
+
+	/* Add the i2c adapter */
+	adap = &dev->adapter;
+	i2c_set_adapdata(adap, dev);
+	adap->owner = THIS_MODULE;
+	strlcpy(adap->name, "Broadcom I2C adapter", sizeof(adap->name));
+	adap->algo = &bcm_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	rc = i2c_add_adapter(adap);
+	if (rc) {
+		dev_err(dev->device, "failed to add adapter\n");
+		return rc;
+	}
+
+	dev_info(dev->device, "device registered successfully\n");
+
+	return 0;
+
+probe_disable_clk:
+	bcm_kona_i2c_disable_clock(dev);
+	clk_disable_unprepare(dev->external_clk);
+
+	return rc;
+}
+
+static int bcm_kona_i2c_remove(struct platform_device *pdev)
+{
+	struct bcm_kona_i2c_dev *dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&dev->adapter);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kona_i2c_of_match[] = {
+	{.compatible = "brcm,kona-i2c",},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_i2c_of_match);
+
+static struct platform_driver bcm_kona_i2c_driver = {
+	.driver = {
+		   .name = "bcm-kona-i2c",
+		   .owner = THIS_MODULE,
+		   .of_match_table = bcm_kona_i2c_of_match,
+		   },
+	.probe = bcm_kona_i2c_probe,
+	.remove = bcm_kona_i2c_remove,
+};
+module_platform_driver(bcm_kona_i2c_driver);
+
+MODULE_AUTHOR("Tim Kryger <tkryger@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom Kona I2C Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-bcm2835.c b/drivers/i2c/busses/i2c-bcm2835.c
index ea4b08f..77df97b 100644
--- a/drivers/i2c/busses/i2c-bcm2835.c
+++ b/drivers/i2c/busses/i2c-bcm2835.c
@@ -151,7 +151,7 @@ static int bcm2835_i2c_xfer_msg(struct bcm2835_i2c_dev *i2c_dev,
 
 	i2c_dev->msg_buf = msg->buf;
 	i2c_dev->msg_buf_remaining = msg->len;
-	INIT_COMPLETION(i2c_dev->completion);
+	reinit_completion(&i2c_dev->completion);
 
 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, BCM2835_I2C_C_CLEAR);
 
@@ -299,6 +299,7 @@ static int bcm2835_i2c_probe(struct platform_device *pdev)
 	strlcpy(adap->name, "bcm2835 I2C adapter", sizeof(adap->name));
 	adap->algo = &bcm2835_i2c_algo;
 	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
 
 	bcm2835_i2c_writel(i2c_dev, BCM2835_I2C_C, 0);
 
diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c
index 05080c4..3b9bd9a 100644
--- a/drivers/i2c/busses/i2c-bfin-twi.c
+++ b/drivers/i2c/busses/i2c-bfin-twi.c
@@ -39,33 +39,40 @@ static void bfin_twi_handle_interrupt(struct bfin_twi_iface *iface,
 	unsigned short mast_stat = read_MASTER_STAT(iface);
 
 	if (twi_int_status & XMTSERV) {
+		if (iface->writeNum <= 0) {
+			/* start receive immediately after complete sending in
+			 * combine mode.
+			 */
+			if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | MDIR);
+			else if (iface->manual_stop)
+				write_MASTER_CTL(iface,
+					read_MASTER_CTL(iface) | STOP);
+			else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
+				iface->cur_msg + 1 < iface->msg_num) {
+				if (iface->pmsg[iface->cur_msg + 1].flags &
+					I2C_M_RD)
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) |
+						MDIR);
+				else
+					write_MASTER_CTL(iface,
+						read_MASTER_CTL(iface) &
+						~MDIR);
+			}
+		}
 		/* Transmit next data */
-		if (iface->writeNum > 0) {
+		while (iface->writeNum > 0 &&
+			(read_FIFO_STAT(iface) & XMTSTAT) != XMT_FULL) {
 			SSYNC();
 			write_XMT_DATA8(iface, *(iface->transPtr++));
 			iface->writeNum--;
 		}
-		/* start receive immediately after complete sending in
-		 * combine mode.
-		 */
-		else if (iface->cur_mode == TWI_I2C_MODE_COMBINED)
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | MDIR);
-		else if (iface->manual_stop)
-			write_MASTER_CTL(iface,
-				read_MASTER_CTL(iface) | STOP);
-		else if (iface->cur_mode == TWI_I2C_MODE_REPEAT &&
-		         iface->cur_msg + 1 < iface->msg_num) {
-			if (iface->pmsg[iface->cur_msg + 1].flags & I2C_M_RD)
-				write_MASTER_CTL(iface,
-					read_MASTER_CTL(iface) | MDIR);
-			else
-				write_MASTER_CTL(iface,
-					read_MASTER_CTL(iface) & ~MDIR);
-		}
 	}
 	if (twi_int_status & RCVSERV) {
-		if (iface->readNum > 0) {
+		while (iface->readNum > 0 &&
+			(read_FIFO_STAT(iface) & RCVSTAT)) {
 			/* Receive next data */
 			*(iface->transPtr) = read_RCV_DATA8(iface);
 			if (iface->cur_mode == TWI_I2C_MODE_COMBINED) {
@@ -575,6 +582,7 @@ static struct i2c_algorithm bfin_twi_algorithm = {
 	.functionality = bfin_twi_functionality,
 };
 
+#ifdef CONFIG_PM_SLEEP
 static int i2c_bfin_twi_suspend(struct device *dev)
 {
 	struct bfin_twi_iface *iface = dev_get_drvdata(dev);
@@ -612,6 +620,10 @@ static int i2c_bfin_twi_resume(struct device *dev)
 
 static SIMPLE_DEV_PM_OPS(i2c_bfin_twi_pm,
 			 i2c_bfin_twi_suspend, i2c_bfin_twi_resume);
+#define I2C_BFIN_TWI_PM_OPS	(&i2c_bfin_twi_pm)
+#else
+#define I2C_BFIN_TWI_PM_OPS	NULL
+#endif
 
 static int i2c_bfin_twi_probe(struct platform_device *pdev)
 {
@@ -662,8 +674,9 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev)
 	p_adap->timeout = 5 * HZ;
 	p_adap->retries = 3;
 
-	rc = peripheral_request_list((unsigned short *)pdev->dev.platform_data,
-					"i2c-bfin-twi");
+	rc = peripheral_request_list(
+			dev_get_platdata(&pdev->dev),
+			"i2c-bfin-twi");
 	if (rc) {
 		dev_err(&pdev->dev, "Can't setup pin mux!\n");
 		goto out_error_pin_mux;
@@ -710,7 +723,7 @@ out_error_add_adapter:
 	free_irq(iface->irq, iface);
 out_error_req_irq:
 out_error_no_irq:
-	peripheral_free_list((unsigned short *)pdev->dev.platform_data);
+	peripheral_free_list(dev_get_platdata(&pdev->dev));
 out_error_pin_mux:
 	iounmap(iface->regs_base);
 out_error_ioremap:
@@ -726,7 +739,7 @@ static int i2c_bfin_twi_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&(iface->adap));
 	free_irq(iface->irq, iface);
-	peripheral_free_list((unsigned short *)pdev->dev.platform_data);
+	peripheral_free_list(dev_get_platdata(&pdev->dev));
 	iounmap(iface->regs_base);
 	kfree(iface);
 
@@ -739,7 +752,7 @@ static struct platform_driver i2c_bfin_twi_driver = {
 	.driver		= {
 		.name	= "i2c-bfin-twi",
 		.owner	= THIS_MODULE,
-		.pm	= &i2c_bfin_twi_pm,
+		.pm	= I2C_BFIN_TWI_PM_OPS,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-cbus-gpio.c b/drivers/i2c/busses/i2c-cbus-gpio.c
index 1be13ac..ce7ffba 100644
--- a/drivers/i2c/busses/i2c-cbus-gpio.c
+++ b/drivers/i2c/busses/i2c-cbus-gpio.c
@@ -233,8 +233,9 @@ static int cbus_i2c_probe(struct platform_device *pdev)
 		chost->clk_gpio = of_get_gpio(dnode, 0);
 		chost->dat_gpio = of_get_gpio(dnode, 1);
 		chost->sel_gpio = of_get_gpio(dnode, 2);
-	} else if (pdev->dev.platform_data) {
-		struct i2c_cbus_platform_data *pdata = pdev->dev.platform_data;
+	} else if (dev_get_platdata(&pdev->dev)) {
+		struct i2c_cbus_platform_data *pdata =
+			dev_get_platdata(&pdev->dev);
 		chost->clk_gpio = pdata->clk_gpio;
 		chost->dat_gpio = pdata->dat_gpio;
 		chost->sel_gpio = pdata->sel_gpio;
@@ -245,6 +246,7 @@ static int cbus_i2c_probe(struct platform_device *pdev)
 	adapter->owner		= THIS_MODULE;
 	adapter->class		= I2C_CLASS_HWMON;
 	adapter->dev.parent	= &pdev->dev;
+	adapter->dev.of_node	= pdev->dev.of_node;
 	adapter->nr		= pdev->id;
 	adapter->timeout	= HZ;
 	adapter->algo		= &cbus_i2c_algo;
@@ -288,6 +290,7 @@ static struct platform_driver cbus_i2c_driver = {
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= "i2c-cbus-gpio",
+		.of_match_table = of_match_ptr(i2c_cbus_dt_ids),
 	},
 };
 module_platform_driver(cbus_i2c_driver);
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3823623..3e5ea2c 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -42,7 +42,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/of_device.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
 #include <sysdev/fsl_soc.h>
 #include <asm/cpm.h>
 
@@ -338,6 +337,14 @@ static int cpm_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
 	tptr = 0;
 	rptr = 0;
 
+	/*
+	 * If there was a collision in the last i2c transaction,
+	 * Set I2COM_MASTER as it was cleared during collision.
+	 */
+	if (in_be16(&tbdf->cbd_sc) & BD_SC_CL) {
+		out_8(&cpm->i2c_reg->i2com, I2COM_MASTER);
+	}
+
 	while (tptr < num) {
 		pmsg = &msgs[tptr];
 		dev_dbg(&adap->dev, "R: %d T: %d\n", rptr, tptr);
@@ -440,7 +447,7 @@ static int cpm_i2c_setup(struct cpm_i2c *cpm)
 
 	init_waitqueue_head(&cpm->i2c_wait);
 
-	cpm->irq = of_irq_to_resource(ofdev->dev.of_node, 0, NULL);
+	cpm->irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
 	if (!cpm->irq)
 		return -EINVAL;
 
@@ -646,7 +653,7 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
 
 	cpm->ofdev = ofdev;
 
-	dev_set_drvdata(&ofdev->dev, cpm);
+	platform_set_drvdata(ofdev, cpm);
 
 	cpm->adap = cpm_ops;
 	i2c_set_adapdata(&cpm->adap, cpm);
@@ -673,11 +680,6 @@ static int cpm_i2c_probe(struct platform_device *ofdev)
 	dev_dbg(&ofdev->dev, "hw routines for %s registered.\n",
 		cpm->adap.name);
 
-	/*
-	 * register OF I2C devices
-	 */
-	of_i2c_register_devices(&cpm->adap);
-
 	return 0;
 out_shut:
 	cpm_i2c_shutdown(cpm);
@@ -689,7 +691,7 @@ out_free:
 
 static int cpm_i2c_remove(struct platform_device *ofdev)
 {
-	struct cpm_i2c *cpm = dev_get_drvdata(&ofdev->dev);
+	struct cpm_i2c *cpm = platform_get_drvdata(ofdev);
 
 	i2c_del_adapter(&cpm->adap);
 
diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c
index cf20e06..af0b583 100644
--- a/drivers/i2c/busses/i2c-davinci.c
+++ b/drivers/i2c/busses/i2c-davinci.c
@@ -38,10 +38,7 @@
 #include <linux/slab.h>
 #include <linux/cpufreq.h>
 #include <linux/gpio.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
-
-#include <mach/hardware.h>
 #include <linux/platform_data/i2c-davinci.h>
 
 /* ----- global defines ----------------------------------------------- */
@@ -128,12 +125,12 @@ static struct davinci_i2c_platform_data davinci_i2c_platform_data_default = {
 static inline void davinci_i2c_write_reg(struct davinci_i2c_dev *i2c_dev,
 					 int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base + reg);
+	writew_relaxed(val, i2c_dev->base + reg);
 }
 
 static inline u16 davinci_i2c_read_reg(struct davinci_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base + reg);
+	return readw_relaxed(i2c_dev->base + reg);
 }
 
 /* Generate a pulse on the i2c clock pin. */
@@ -326,7 +323,7 @@ i2c_davinci_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int stop)
 
 	davinci_i2c_write_reg(dev, DAVINCI_I2C_CNT_REG, dev->buf_len);
 
-	INIT_COMPLETION(dev->cmd_complete);
+	reinit_completion(&dev->cmd_complete);
 	dev->cmd_err = 0;
 
 	/* Take I2C out of reset and configure it as master */
@@ -646,13 +643,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 	struct resource *mem, *irq;
 	int r;
 
-	/* NOTE: driver uses the static register mapping */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -ENODEV;
-	}
-
 	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
 	if (!irq) {
 		dev_err(&pdev->dev, "no irq resource?\n");
@@ -672,7 +662,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 #endif
 	dev->dev = &pdev->dev;
 	dev->irq = irq->start;
-	dev->pdata = dev->dev->platform_data;
+	dev->pdata = dev_get_platdata(&pdev->dev);
 	platform_set_drvdata(pdev, dev);
 
 	if (!dev->pdata && pdev->dev.of_node) {
@@ -697,6 +687,7 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		return -ENODEV;
 	clk_prepare_enable(dev->clk);
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base)) {
 		r = PTR_ERR(dev->base);
@@ -734,7 +725,6 @@ static int davinci_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failure adding adapter\n");
 		goto err_unuse_clocks;
 	}
-	of_i2c_register_devices(adap);
 
 	return 0;
 
@@ -805,7 +795,7 @@ static struct platform_driver davinci_i2c_driver = {
 		.name	= "i2c_davinci",
 		.owner	= THIS_MODULE,
 		.pm	= davinci_i2c_pm_ops,
-		.of_match_table = of_match_ptr(davinci_i2c_of_match),
+		.of_match_table = davinci_i2c_of_match,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index c41ca63..e89e3e2 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -67,9 +67,12 @@
 #define DW_IC_STATUS		0x70
 #define DW_IC_TXFLR		0x74
 #define DW_IC_RXFLR		0x78
+#define DW_IC_SDA_HOLD		0x7c
 #define DW_IC_TX_ABRT_SOURCE	0x80
 #define DW_IC_ENABLE_STATUS	0x9c
 #define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_VERSION	0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
 #define DW_IC_COMP_TYPE		0xfc
 #define DW_IC_COMP_TYPE_VALUE	0x44570140
 
@@ -95,6 +98,8 @@
 
 #define DW_IC_ERR_TX_ABRT	0x1
 
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+
 /*
  * status codes
  */
@@ -314,6 +319,12 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 				47,	/* tLOW = 4.7 us */
 				3,	/* tf = 0.3 us */
 				0);	/* No offset */
+
+	/* Allow platforms to specify the ideal HCNT and LCNT values */
+	if (dev->ss_hcnt && dev->ss_lcnt) {
+		hcnt = dev->ss_hcnt;
+		lcnt = dev->ss_lcnt;
+	}
 	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
 	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
 	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
@@ -328,10 +339,25 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 				13,	/* tLOW = 1.3 us */
 				3,	/* tf = 0.3 us */
 				0);	/* No offset */
+
+	if (dev->fs_hcnt && dev->fs_lcnt) {
+		hcnt = dev->fs_hcnt;
+		lcnt = dev->fs_lcnt;
+	}
 	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
 	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
 	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
 
+	/* Configure SDA Hold Time if required */
+	if (dev->sda_hold_time) {
+		reg = dw_readl(dev, DW_IC_COMP_VERSION);
+		if (reg >= DW_IC_SDA_HOLD_MIN_VERS)
+			dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+		else
+			dev_warn(dev->dev,
+				"Hardware too old to adjust SDA hold time.");
+	}
+
 	/* Configure Tx/Rx FIFO threshold levels */
 	dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
 	dw_writel(dev, 0, DW_IC_RX_TL);
@@ -364,22 +390,34 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
 	struct i2c_msg *msgs = dev->msgs;
-	u32 ic_con;
+	u32 ic_con, ic_tar = 0;
 
 	/* Disable the adapter */
 	__i2c_dw_enable(dev, false);
 
-	/* set the slave (target) address */
-	dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR);
-
 	/* if the slave address is ten bit address, enable 10BITADDR */
 	ic_con = dw_readl(dev, DW_IC_CON);
-	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN)
+	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
 		ic_con |= DW_IC_CON_10BITADDR_MASTER;
-	else
+		/*
+		 * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing
+		 * mode has to be enabled via bit 12 of IC_TAR register.
+		 * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be
+		 * detected from registers.
+		 */
+		ic_tar = DW_IC_TAR_10BITADDR_MASTER;
+	} else {
 		ic_con &= ~DW_IC_CON_10BITADDR_MASTER;
+	}
+
 	dw_writel(dev, ic_con, DW_IC_CON);
 
+	/*
+	 * Set the slave (target) address and enable 10-bit addressing mode
+	 * if applicable.
+	 */
+	dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
+
 	/* Enable the adapter */
 	__i2c_dw_enable(dev, true);
 
@@ -403,6 +441,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	u32 addr = msgs[dev->msg_write_idx].addr;
 	u32 buf_len = dev->tx_buf_len;
 	u8 *buf = dev->tx_buf;
+	bool need_restart = false;
 
 	intr_mask = DW_IC_INTR_DEFAULT_MASK;
 
@@ -430,6 +469,14 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			/* new i2c_msg */
 			buf = msgs[dev->msg_write_idx].buf;
 			buf_len = msgs[dev->msg_write_idx].len;
+
+			/* If both IC_EMPTYFIFO_HOLD_MASTER_EN and
+			 * IC_RESTART_EN are set, we must manually
+			 * set restart bit between messages.
+			 */
+			if ((dev->master_cfg & DW_IC_CON_RESTART_EN) &&
+					(dev->msg_write_idx > 0))
+				need_restart = true;
 		}
 
 		tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR);
@@ -448,6 +495,11 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			    buf_len == 1)
 				cmd |= BIT(9);
 
+			if (need_restart) {
+				cmd |= BIT(10);
+				need_restart = false;
+			}
+
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
 
 				/* avoid rx buffer overrun */
@@ -561,7 +613,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	mutex_lock(&dev->lock);
 	pm_runtime_get_sync(dev->dev);
 
-	INIT_COMPLETION(dev->cmd_complete);
+	reinit_completion(&dev->cmd_complete);
 	dev->msgs = msgs;
 	dev->msgs_num = num;
 	dev->cmd_err = 0;
@@ -580,14 +632,23 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	i2c_dw_xfer_init(dev);
 
 	/* wait for tx to complete */
-	ret = wait_for_completion_interruptible_timeout(&dev->cmd_complete, HZ);
+	ret = wait_for_completion_timeout(&dev->cmd_complete, HZ);
 	if (ret == 0) {
 		dev_err(dev->dev, "controller timed out\n");
+		/* i2c_dw_init implicitly disables the adapter */
 		i2c_dw_init(dev);
 		ret = -ETIMEDOUT;
 		goto done;
-	} else if (ret < 0)
-		goto done;
+	}
+
+	/*
+	 * We must disable the adapter before unlocking the &dev->lock mutex
+	 * below. Otherwise the hardware might continue generating interrupts
+	 * which in turn causes a race condition with the following transfer.
+	 * Needs some more investigation if the additional interrupts are
+	 * a hardware bug or this driver doesn't handle them correctly yet.
+	 */
+	__i2c_dw_enable(dev, false);
 
 	if (dev->msg_err) {
 		ret = dev->msg_err;
@@ -596,8 +657,6 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 
 	/* no error */
 	if (likely(!dev->cmd_err)) {
-		/* Disable the adapter */
-		__i2c_dw_enable(dev, false);
 		ret = num;
 		goto done;
 	}
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index e761ad1..e8a7565 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -61,6 +61,14 @@
  * @tx_fifo_depth: depth of the hardware tx fifo
  * @rx_fifo_depth: depth of the hardware rx fifo
  * @rx_outstanding: current master-rx elements in tx fifo
+ * @ss_hcnt: standard speed HCNT value
+ * @ss_lcnt: standard speed LCNT value
+ * @fs_hcnt: fast speed HCNT value
+ * @fs_lcnt: fast speed LCNT value
+ *
+ * HCNT and LCNT parameters can be used if the platform knows more accurate
+ * values than the one computed based only on the input clock frequency.
+ * Leave them to be %0 if not used.
  */
 struct dw_i2c_dev {
 	struct device		*dev;
@@ -90,6 +98,11 @@ struct dw_i2c_dev {
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
 	int			rx_outstanding;
+	u32			sda_hold_time;
+	u16			ss_hcnt;
+	u16			ss_lcnt;
+	u16			fs_hcnt;
+	u16			fs_lcnt;
 };
 
 #define ACCESS_SWAP		0x00000001
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 35b70a1..d0bdac0 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -34,7 +34,7 @@
 #include <linux/sched.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
-#include <linux/of_i2c.h>
+#include <linux/of.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
@@ -53,9 +53,33 @@ static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
 }
 
 #ifdef CONFIG_ACPI
+static void dw_i2c_acpi_params(struct platform_device *pdev, char method[],
+			       u16 *hcnt, u16 *lcnt, u32 *sda_hold)
+{
+	struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER };
+	acpi_handle handle = ACPI_HANDLE(&pdev->dev);
+	union acpi_object *obj;
+
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, method, NULL, &buf)))
+		return;
+
+	obj = (union acpi_object *)buf.pointer;
+	if (obj->type == ACPI_TYPE_PACKAGE && obj->package.count == 3) {
+		const union acpi_object *objs = obj->package.elements;
+
+		*hcnt = (u16)objs[0].integer.value;
+		*lcnt = (u16)objs[1].integer.value;
+		if (sda_hold)
+			*sda_hold = (u32)objs[2].integer.value;
+	}
+
+	kfree(buf.pointer);
+}
+
 static int dw_i2c_acpi_configure(struct platform_device *pdev)
 {
 	struct dw_i2c_dev *dev = platform_get_drvdata(pdev);
+	bool fs_mode = dev->master_cfg & DW_IC_CON_SPEED_FAST;
 
 	if (!ACPI_HANDLE(&pdev->dev))
 		return -ENODEV;
@@ -63,12 +87,24 @@ static int dw_i2c_acpi_configure(struct platform_device *pdev)
 	dev->adapter.nr = -1;
 	dev->tx_fifo_depth = 32;
 	dev->rx_fifo_depth = 32;
+
+	/*
+	 * Try to get SDA hold time and *CNT values from an ACPI method if
+	 * it exists for both supported speed modes.
+	 */
+	dw_i2c_acpi_params(pdev, "SSCN", &dev->ss_hcnt, &dev->ss_lcnt,
+			   fs_mode ? NULL : &dev->sda_hold_time);
+	dw_i2c_acpi_params(pdev, "FMCN", &dev->fs_hcnt, &dev->fs_lcnt,
+			   fs_mode ? &dev->sda_hold_time : NULL);
+
 	return 0;
 }
 
 static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "INT33C2", 0 },
 	{ "INT33C3", 0 },
+	{ "INT3432", 0 },
+	{ "INT3433", 0 },
 	{ "80860F41", 0 },
 	{ }
 };
@@ -87,13 +123,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	struct resource *mem;
 	int irq, r;
 
-	/* NOTE: driver uses the static register mapping */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -EINVAL;
-	}
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "no irq resource?\n");
@@ -104,6 +133,7 @@ static int dw_i2c_probe(struct platform_device *pdev)
 	if (!dev)
 		return -ENOMEM;
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base))
 		return PTR_ERR(dev->base);
@@ -121,6 +151,16 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		return PTR_ERR(dev->clk);
 	clk_prepare_enable(dev->clk);
 
+	if (pdev->dev.of_node) {
+		u32 ht = 0;
+		u32 ic_clk = dev->get_clk_rate_khz(dev);
+
+		of_property_read_u32(pdev->dev.of_node,
+					"i2c-sda-hold-time-ns", &ht);
+		dev->sda_hold_time = div_u64((u64)ic_clk * ht + 500000,
+					     1000000);
+	}
+
 	dev->functionality =
 		I2C_FUNC_I2C |
 		I2C_FUNC_10BIT_ADDR |
@@ -167,8 +207,6 @@ static int dw_i2c_probe(struct platform_device *pdev)
 		dev_err(&pdev->dev, "failure adding adapter\n");
 		return r;
 	}
-	of_i2c_register_devices(adap);
-	acpi_i2c_register_devices(adap);
 
 	pm_runtime_set_autosuspend_delay(&pdev->dev, 1000);
 	pm_runtime_use_autosuspend(&pdev->dev);
@@ -202,7 +240,7 @@ static const struct of_device_id dw_i2c_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #endif
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int dw_i2c_suspend(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -223,27 +261,31 @@ static int dw_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
 static SIMPLE_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend, dw_i2c_resume);
+#define DW_I2C_DEV_PM_OPS	(&dw_i2c_dev_pm_ops)
+#else
+#define DW_I2C_DEV_PM_OPS	NULL
+#endif
 
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");
 
 static struct platform_driver dw_i2c_driver = {
-	.remove		= dw_i2c_remove,
+	.probe = dw_i2c_probe,
+	.remove = dw_i2c_remove,
 	.driver		= {
 		.name	= "i2c_designware",
 		.owner	= THIS_MODULE,
 		.of_match_table = of_match_ptr(dw_i2c_of_match),
 		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
-		.pm	= &dw_i2c_dev_pm_ops,
+		.pm	= DW_I2C_DEV_PM_OPS,
 	},
 };
 
 static int __init dw_i2c_init_driver(void)
 {
-	return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe);
+	return platform_driver_register(&dw_i2c_driver);
 }
 subsys_initcall(dw_i2c_init_driver);
 
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index dae3ddf..721f7eb 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -25,8 +25,6 @@
 #define USB_VENDOR_ID_DIOLAN		0x0abf
 #define USB_DEVICE_ID_DIOLAN_U2C	0x3370
 
-#define DIOLAN_OUT_EP		0x02
-#define DIOLAN_IN_EP		0x84
 
 /* commands via USB, must match command ids in the firmware */
 #define CMD_I2C_READ		0x01
@@ -84,6 +82,7 @@
 struct i2c_diolan_u2c {
 	u8 obuffer[DIOLAN_OUTBUF_LEN];	/* output buffer */
 	u8 ibuffer[DIOLAN_INBUF_LEN];	/* input buffer */
+	int ep_in, ep_out;              /* Endpoints    */
 	struct usb_device *usb_dev;	/* the usb device for this device */
 	struct usb_interface *interface;/* the interface for this device */
 	struct i2c_adapter adapter;	/* i2c related things */
@@ -109,7 +108,7 @@ static int diolan_usb_transfer(struct i2c_diolan_u2c *dev)
 		return -EINVAL;
 
 	ret = usb_bulk_msg(dev->usb_dev,
-			   usb_sndbulkpipe(dev->usb_dev, DIOLAN_OUT_EP),
+			   usb_sndbulkpipe(dev->usb_dev, dev->ep_out),
 			   dev->obuffer, dev->olen, &actual,
 			   DIOLAN_USB_TIMEOUT);
 	if (!ret) {
@@ -118,7 +117,7 @@ static int diolan_usb_transfer(struct i2c_diolan_u2c *dev)
 
 			tmpret = usb_bulk_msg(dev->usb_dev,
 					      usb_rcvbulkpipe(dev->usb_dev,
-							      DIOLAN_IN_EP),
+							      dev->ep_in),
 					      dev->ibuffer,
 					      sizeof(dev->ibuffer), &actual,
 					      DIOLAN_USB_TIMEOUT);
@@ -210,7 +209,7 @@ static void diolan_flush_input(struct i2c_diolan_u2c *dev)
 		int ret;
 
 		ret = usb_bulk_msg(dev->usb_dev,
-				   usb_rcvbulkpipe(dev->usb_dev, DIOLAN_IN_EP),
+				   usb_rcvbulkpipe(dev->usb_dev, dev->ep_in),
 				   dev->ibuffer, sizeof(dev->ibuffer), &actual,
 				   DIOLAN_USB_TIMEOUT);
 		if (ret < 0 || actual == 0)
@@ -445,9 +444,14 @@ static void diolan_u2c_free(struct i2c_diolan_u2c *dev)
 static int diolan_u2c_probe(struct usb_interface *interface,
 			    const struct usb_device_id *id)
 {
+	struct usb_host_interface *hostif = interface->cur_altsetting;
 	struct i2c_diolan_u2c *dev;
 	int ret;
 
+	if (hostif->desc.bInterfaceNumber != 0
+	    || hostif->desc.bNumEndpoints < 2)
+		return -ENODEV;
+
 	/* allocate memory for our device state and initialize it */
 	dev = kzalloc(sizeof(*dev), GFP_KERNEL);
 	if (dev == NULL) {
@@ -455,6 +459,8 @@ static int diolan_u2c_probe(struct usb_interface *interface,
 		ret = -ENOMEM;
 		goto error;
 	}
+	dev->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+	dev->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
 
 	dev->usb_dev = usb_get_dev(interface_to_usbdev(interface));
 	dev->interface = interface;
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 0f37529..ff15ae9 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -312,24 +312,6 @@ static void pch_i2c_start(struct i2c_algo_pch_data *adap)
 }
 
 /**
- * pch_i2c_getack() - to confirm ACK/NACK
- * @adap:	Pointer to struct i2c_algo_pch_data.
- */
-static s32 pch_i2c_getack(struct i2c_algo_pch_data *adap)
-{
-	u32 reg_val;
-	void __iomem *p = adap->pch_base_address;
-	reg_val = ioread32(p + PCH_I2CSR) & PCH_GETACK;
-
-	if (reg_val != 0) {
-		pch_err(adap, "return%d\n", -EPROTO);
-		return -EPROTO;
-	}
-
-	return 0;
-}
-
-/**
  * pch_i2c_stop() - generate stop condition in normal mode.
  * @adap:	Pointer to struct i2c_algo_pch_data.
  */
@@ -344,6 +326,7 @@ static void pch_i2c_stop(struct i2c_algo_pch_data *adap)
 static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
 {
 	long ret;
+	void __iomem *p = adap->pch_base_address;
 
 	ret = wait_event_timeout(pch_event,
 			(adap->pch_event_flag != 0), msecs_to_jiffies(1000));
@@ -366,10 +349,9 @@ static int pch_i2c_wait_for_check_xfer(struct i2c_algo_pch_data *adap)
 
 	adap->pch_event_flag = 0;
 
-	if (pch_i2c_getack(adap)) {
-		pch_dbg(adap, "Receive NACK for slave address"
-			"setting\n");
-		return -EIO;
+	if (ioread32(p + PCH_I2CSR) & PCH_GETACK) {
+		pch_dbg(adap, "Receive NACK for slave address setting\n");
+		return -ENXIO;
 	}
 
 	return 0;
diff --git a/drivers/i2c/busses/i2c-exynos5.c b/drivers/i2c/busses/i2c-exynos5.c
new file mode 100644
index 0000000..c1ef228
--- /dev/null
+++ b/drivers/i2c/busses/i2c-exynos5.c
@@ -0,0 +1,769 @@
+/**
+ * i2c-exynos5.c - Samsung Exynos5 I2C Controller Driver
+ *
+ * Copyright (C) 2013 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/spinlock.h>
+
+/*
+ * HSI2C controller from Samsung supports 2 modes of operation
+ * 1. Auto mode: Where in master automatically controls the whole transaction
+ * 2. Manual mode: Software controls the transaction by issuing commands
+ *    START, READ, WRITE, STOP, RESTART in I2C_MANUAL_CMD register.
+ *
+ * Operation mode can be selected by setting AUTO_MODE bit in I2C_CONF register
+ *
+ * Special bits are available for both modes of operation to set commands
+ * and for checking transfer status
+ */
+
+/* Register Map */
+#define HSI2C_CTL		0x00
+#define HSI2C_FIFO_CTL		0x04
+#define HSI2C_TRAILIG_CTL	0x08
+#define HSI2C_CLK_CTL		0x0C
+#define HSI2C_CLK_SLOT		0x10
+#define HSI2C_INT_ENABLE	0x20
+#define HSI2C_INT_STATUS	0x24
+#define HSI2C_ERR_STATUS	0x2C
+#define HSI2C_FIFO_STATUS	0x30
+#define HSI2C_TX_DATA		0x34
+#define HSI2C_RX_DATA		0x38
+#define HSI2C_CONF		0x40
+#define HSI2C_AUTO_CONF		0x44
+#define HSI2C_TIMEOUT		0x48
+#define HSI2C_MANUAL_CMD	0x4C
+#define HSI2C_TRANS_STATUS	0x50
+#define HSI2C_TIMING_HS1	0x54
+#define HSI2C_TIMING_HS2	0x58
+#define HSI2C_TIMING_HS3	0x5C
+#define HSI2C_TIMING_FS1	0x60
+#define HSI2C_TIMING_FS2	0x64
+#define HSI2C_TIMING_FS3	0x68
+#define HSI2C_TIMING_SLA	0x6C
+#define HSI2C_ADDR		0x70
+
+/* I2C_CTL Register bits */
+#define HSI2C_FUNC_MODE_I2C			(1u << 0)
+#define HSI2C_MASTER				(1u << 3)
+#define HSI2C_RXCHON				(1u << 6)
+#define HSI2C_TXCHON				(1u << 7)
+#define HSI2C_SW_RST				(1u << 31)
+
+/* I2C_FIFO_CTL Register bits */
+#define HSI2C_RXFIFO_EN				(1u << 0)
+#define HSI2C_TXFIFO_EN				(1u << 1)
+#define HSI2C_RXFIFO_TRIGGER_LEVEL(x)		((x) << 4)
+#define HSI2C_TXFIFO_TRIGGER_LEVEL(x)		((x) << 16)
+
+/* As per user manual FIFO max depth is 64bytes */
+#define HSI2C_FIFO_MAX				0x40
+/* default trigger levels for Tx and Rx FIFOs */
+#define HSI2C_DEF_TXFIFO_LVL			(HSI2C_FIFO_MAX - 0x30)
+#define HSI2C_DEF_RXFIFO_LVL			(HSI2C_FIFO_MAX - 0x10)
+
+/* I2C_TRAILING_CTL Register bits */
+#define HSI2C_TRAILING_COUNT			(0xf)
+
+/* I2C_INT_EN Register bits */
+#define HSI2C_INT_TX_ALMOSTEMPTY_EN		(1u << 0)
+#define HSI2C_INT_RX_ALMOSTFULL_EN		(1u << 1)
+#define HSI2C_INT_TRAILING_EN			(1u << 6)
+#define HSI2C_INT_I2C_EN			(1u << 9)
+
+/* I2C_INT_STAT Register bits */
+#define HSI2C_INT_TX_ALMOSTEMPTY		(1u << 0)
+#define HSI2C_INT_RX_ALMOSTFULL			(1u << 1)
+#define HSI2C_INT_TX_UNDERRUN			(1u << 2)
+#define HSI2C_INT_TX_OVERRUN			(1u << 3)
+#define HSI2C_INT_RX_UNDERRUN			(1u << 4)
+#define HSI2C_INT_RX_OVERRUN			(1u << 5)
+#define HSI2C_INT_TRAILING			(1u << 6)
+#define HSI2C_INT_I2C				(1u << 9)
+
+/* I2C_FIFO_STAT Register bits */
+#define HSI2C_RX_FIFO_EMPTY			(1u << 24)
+#define HSI2C_RX_FIFO_FULL			(1u << 23)
+#define HSI2C_RX_FIFO_LVL(x)			((x >> 16) & 0x7f)
+#define HSI2C_TX_FIFO_EMPTY			(1u << 8)
+#define HSI2C_TX_FIFO_FULL			(1u << 7)
+#define HSI2C_TX_FIFO_LVL(x)			((x >> 0) & 0x7f)
+
+/* I2C_CONF Register bits */
+#define HSI2C_AUTO_MODE				(1u << 31)
+#define HSI2C_10BIT_ADDR_MODE			(1u << 30)
+#define HSI2C_HS_MODE				(1u << 29)
+
+/* I2C_AUTO_CONF Register bits */
+#define HSI2C_READ_WRITE			(1u << 16)
+#define HSI2C_STOP_AFTER_TRANS			(1u << 17)
+#define HSI2C_MASTER_RUN			(1u << 31)
+
+/* I2C_TIMEOUT Register bits */
+#define HSI2C_TIMEOUT_EN			(1u << 31)
+#define HSI2C_TIMEOUT_MASK			0xff
+
+/* I2C_TRANS_STATUS register bits */
+#define HSI2C_MASTER_BUSY			(1u << 17)
+#define HSI2C_SLAVE_BUSY			(1u << 16)
+#define HSI2C_TIMEOUT_AUTO			(1u << 4)
+#define HSI2C_NO_DEV				(1u << 3)
+#define HSI2C_NO_DEV_ACK			(1u << 2)
+#define HSI2C_TRANS_ABORT			(1u << 1)
+#define HSI2C_TRANS_DONE			(1u << 0)
+
+/* I2C_ADDR register bits */
+#define HSI2C_SLV_ADDR_SLV(x)			((x & 0x3ff) << 0)
+#define HSI2C_SLV_ADDR_MAS(x)			((x & 0x3ff) << 10)
+#define HSI2C_MASTER_ID(x)			((x & 0xff) << 24)
+#define MASTER_ID(x)				((x & 0x7) + 0x08)
+
+/*
+ * Controller operating frequency, timing values for operation
+ * are calculated against this frequency
+ */
+#define HSI2C_HS_TX_CLOCK	1000000
+#define HSI2C_FS_TX_CLOCK	100000
+#define HSI2C_HIGH_SPD		1
+#define HSI2C_FAST_SPD		0
+
+#define EXYNOS5_I2C_TIMEOUT (msecs_to_jiffies(1000))
+
+struct exynos5_i2c {
+	struct i2c_adapter	adap;
+	unsigned int		suspended:1;
+
+	struct i2c_msg		*msg;
+	struct completion	msg_complete;
+	unsigned int		msg_ptr;
+
+	unsigned int		irq;
+
+	void __iomem		*regs;
+	struct clk		*clk;
+	struct device		*dev;
+	int			state;
+
+	spinlock_t		lock;		/* IRQ synchronization */
+
+	/*
+	 * Since the TRANS_DONE bit is cleared on read, and we may read it
+	 * either during an IRQ or after a transaction, keep track of its
+	 * state here.
+	 */
+	int			trans_done;
+
+	/* Controller operating frequency */
+	unsigned int		fs_clock;
+	unsigned int		hs_clock;
+
+	/*
+	 * HSI2C Controller can operate in
+	 * 1. High speed upto 3.4Mbps
+	 * 2. Fast speed upto 1Mbps
+	 */
+	int			speed_mode;
+};
+
+static const struct of_device_id exynos5_i2c_match[] = {
+	{ .compatible = "samsung,exynos5-hsi2c" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, exynos5_i2c_match);
+
+static void exynos5_i2c_clr_pend_irq(struct exynos5_i2c *i2c)
+{
+	writel(readl(i2c->regs + HSI2C_INT_STATUS),
+				i2c->regs + HSI2C_INT_STATUS);
+}
+
+/*
+ * exynos5_i2c_set_timing: updates the registers with appropriate
+ * timing values calculated
+ *
+ * Returns 0 on success, -EINVAL if the cycle length cannot
+ * be calculated.
+ */
+static int exynos5_i2c_set_timing(struct exynos5_i2c *i2c, int mode)
+{
+	u32 i2c_timing_s1;
+	u32 i2c_timing_s2;
+	u32 i2c_timing_s3;
+	u32 i2c_timing_sla;
+	unsigned int t_start_su, t_start_hd;
+	unsigned int t_stop_su;
+	unsigned int t_data_su, t_data_hd;
+	unsigned int t_scl_l, t_scl_h;
+	unsigned int t_sr_release;
+	unsigned int t_ftl_cycle;
+	unsigned int clkin = clk_get_rate(i2c->clk);
+	unsigned int div, utemp0 = 0, utemp1 = 0, clk_cycle;
+	unsigned int op_clk = (mode == HSI2C_HIGH_SPD) ?
+				i2c->hs_clock : i2c->fs_clock;
+
+	/*
+	 * FPCLK / FI2C =
+	 * (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2) + 8 + 2 * FLT_CYCLE
+	 * utemp0 = (CLK_DIV + 1) * (TSCLK_L + TSCLK_H + 2)
+	 * utemp1 = (TSCLK_L + TSCLK_H + 2)
+	 */
+	t_ftl_cycle = (readl(i2c->regs + HSI2C_CONF) >> 16) & 0x7;
+	utemp0 = (clkin / op_clk) - 8 - 2 * t_ftl_cycle;
+
+	/* CLK_DIV max is 256 */
+	for (div = 0; div < 256; div++) {
+		utemp1 = utemp0 / (div + 1);
+
+		/*
+		 * SCL_L and SCL_H each has max value of 255
+		 * Hence, For the clk_cycle to the have right value
+		 * utemp1 has to be less then 512 and more than 4.
+		 */
+		if ((utemp1 < 512) && (utemp1 > 4)) {
+			clk_cycle = utemp1 - 2;
+			break;
+		} else if (div == 255) {
+			dev_warn(i2c->dev, "Failed to calculate divisor");
+			return -EINVAL;
+		}
+	}
+
+	t_scl_l = clk_cycle / 2;
+	t_scl_h = clk_cycle / 2;
+	t_start_su = t_scl_l;
+	t_start_hd = t_scl_l;
+	t_stop_su = t_scl_l;
+	t_data_su = t_scl_l / 2;
+	t_data_hd = t_scl_l / 2;
+	t_sr_release = clk_cycle;
+
+	i2c_timing_s1 = t_start_su << 24 | t_start_hd << 16 | t_stop_su << 8;
+	i2c_timing_s2 = t_data_su << 24 | t_scl_l << 8 | t_scl_h << 0;
+	i2c_timing_s3 = div << 16 | t_sr_release << 0;
+	i2c_timing_sla = t_data_hd << 0;
+
+	dev_dbg(i2c->dev, "tSTART_SU: %X, tSTART_HD: %X, tSTOP_SU: %X\n",
+		t_start_su, t_start_hd, t_stop_su);
+	dev_dbg(i2c->dev, "tDATA_SU: %X, tSCL_L: %X, tSCL_H: %X\n",
+		t_data_su, t_scl_l, t_scl_h);
+	dev_dbg(i2c->dev, "nClkDiv: %X, tSR_RELEASE: %X\n",
+		div, t_sr_release);
+	dev_dbg(i2c->dev, "tDATA_HD: %X\n", t_data_hd);
+
+	if (mode == HSI2C_HIGH_SPD) {
+		writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_HS1);
+		writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_HS2);
+		writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_HS3);
+	} else {
+		writel(i2c_timing_s1, i2c->regs + HSI2C_TIMING_FS1);
+		writel(i2c_timing_s2, i2c->regs + HSI2C_TIMING_FS2);
+		writel(i2c_timing_s3, i2c->regs + HSI2C_TIMING_FS3);
+	}
+	writel(i2c_timing_sla, i2c->regs + HSI2C_TIMING_SLA);
+
+	return 0;
+}
+
+static int exynos5_hsi2c_clock_setup(struct exynos5_i2c *i2c)
+{
+	/*
+	 * Configure the Fast speed timing values
+	 * Even the High Speed mode initially starts with Fast mode
+	 */
+	if (exynos5_i2c_set_timing(i2c, HSI2C_FAST_SPD)) {
+		dev_err(i2c->dev, "HSI2C FS Clock set up failed\n");
+		return -EINVAL;
+	}
+
+	/* configure the High speed timing values */
+	if (i2c->speed_mode == HSI2C_HIGH_SPD) {
+		if (exynos5_i2c_set_timing(i2c, HSI2C_HIGH_SPD)) {
+			dev_err(i2c->dev, "HSI2C HS Clock set up failed\n");
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/*
+ * exynos5_i2c_init: configures the controller for I2C functionality
+ * Programs I2C controller for Master mode operation
+ */
+static void exynos5_i2c_init(struct exynos5_i2c *i2c)
+{
+	u32 i2c_conf = readl(i2c->regs + HSI2C_CONF);
+	u32 i2c_timeout = readl(i2c->regs + HSI2C_TIMEOUT);
+
+	/* Clear to disable Timeout */
+	i2c_timeout &= ~HSI2C_TIMEOUT_EN;
+	writel(i2c_timeout, i2c->regs + HSI2C_TIMEOUT);
+
+	writel((HSI2C_FUNC_MODE_I2C | HSI2C_MASTER),
+					i2c->regs + HSI2C_CTL);
+	writel(HSI2C_TRAILING_COUNT, i2c->regs + HSI2C_TRAILIG_CTL);
+
+	if (i2c->speed_mode == HSI2C_HIGH_SPD) {
+		writel(HSI2C_MASTER_ID(MASTER_ID(i2c->adap.nr)),
+					i2c->regs + HSI2C_ADDR);
+		i2c_conf |= HSI2C_HS_MODE;
+	}
+
+	writel(i2c_conf | HSI2C_AUTO_MODE, i2c->regs + HSI2C_CONF);
+}
+
+static void exynos5_i2c_reset(struct exynos5_i2c *i2c)
+{
+	u32 i2c_ctl;
+
+	/* Set and clear the bit for reset */
+	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+	i2c_ctl |= HSI2C_SW_RST;
+	writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+	i2c_ctl &= ~HSI2C_SW_RST;
+	writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+	/* We don't expect calculations to fail during the run */
+	exynos5_hsi2c_clock_setup(i2c);
+	/* Initialize the configure registers */
+	exynos5_i2c_init(i2c);
+}
+
+/*
+ * exynos5_i2c_irq: top level IRQ servicing routine
+ *
+ * INT_STATUS registers gives the interrupt details. Further,
+ * FIFO_STATUS or TRANS_STATUS registers are to be check for detailed
+ * state of the bus.
+ */
+static irqreturn_t exynos5_i2c_irq(int irqno, void *dev_id)
+{
+	struct exynos5_i2c *i2c = dev_id;
+	u32 fifo_level, int_status, fifo_status, trans_status;
+	unsigned char byte;
+	int len = 0;
+
+	i2c->state = -EINVAL;
+
+	spin_lock(&i2c->lock);
+
+	int_status = readl(i2c->regs + HSI2C_INT_STATUS);
+	writel(int_status, i2c->regs + HSI2C_INT_STATUS);
+	fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+
+	/* handle interrupt related to the transfer status */
+	if (int_status & HSI2C_INT_I2C) {
+		trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+		if (trans_status & HSI2C_NO_DEV_ACK) {
+			dev_dbg(i2c->dev, "No ACK from device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (trans_status & HSI2C_NO_DEV) {
+			dev_dbg(i2c->dev, "No device\n");
+			i2c->state = -ENXIO;
+			goto stop;
+		} else if (trans_status & HSI2C_TRANS_ABORT) {
+			dev_dbg(i2c->dev, "Deal with arbitration lose\n");
+			i2c->state = -EAGAIN;
+			goto stop;
+		} else if (trans_status & HSI2C_TIMEOUT_AUTO) {
+			dev_dbg(i2c->dev, "Accessing device timed out\n");
+			i2c->state = -EAGAIN;
+			goto stop;
+		} else if (trans_status & HSI2C_TRANS_DONE) {
+			i2c->trans_done = 1;
+			i2c->state = 0;
+		}
+	}
+
+	if ((i2c->msg->flags & I2C_M_RD) && (int_status &
+			(HSI2C_INT_TRAILING | HSI2C_INT_RX_ALMOSTFULL))) {
+		fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+		fifo_level = HSI2C_RX_FIFO_LVL(fifo_status);
+		len = min(fifo_level, i2c->msg->len - i2c->msg_ptr);
+
+		while (len > 0) {
+			byte = (unsigned char)
+				readl(i2c->regs + HSI2C_RX_DATA);
+			i2c->msg->buf[i2c->msg_ptr++] = byte;
+			len--;
+		}
+		i2c->state = 0;
+	} else if (int_status & HSI2C_INT_TX_ALMOSTEMPTY) {
+		fifo_status = readl(i2c->regs + HSI2C_FIFO_STATUS);
+		fifo_level = HSI2C_TX_FIFO_LVL(fifo_status);
+
+		len = HSI2C_FIFO_MAX - fifo_level;
+		if (len > (i2c->msg->len - i2c->msg_ptr))
+			len = i2c->msg->len - i2c->msg_ptr;
+
+		while (len > 0) {
+			byte = i2c->msg->buf[i2c->msg_ptr++];
+			writel(byte, i2c->regs + HSI2C_TX_DATA);
+			len--;
+		}
+		i2c->state = 0;
+	}
+
+ stop:
+	if ((i2c->trans_done && (i2c->msg->len == i2c->msg_ptr)) ||
+	    (i2c->state < 0)) {
+		writel(0, i2c->regs + HSI2C_INT_ENABLE);
+		exynos5_i2c_clr_pend_irq(i2c);
+		complete(&i2c->msg_complete);
+	}
+
+	spin_unlock(&i2c->lock);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * exynos5_i2c_wait_bus_idle
+ *
+ * Wait for the bus to go idle, indicated by the MASTER_BUSY bit being
+ * cleared.
+ *
+ * Returns -EBUSY if the bus cannot be bought to idle
+ */
+static int exynos5_i2c_wait_bus_idle(struct exynos5_i2c *i2c)
+{
+	unsigned long stop_time;
+	u32 trans_status;
+
+	/* wait for 100 milli seconds for the bus to be idle */
+	stop_time = jiffies + msecs_to_jiffies(100) + 1;
+	do {
+		trans_status = readl(i2c->regs + HSI2C_TRANS_STATUS);
+		if (!(trans_status & HSI2C_MASTER_BUSY))
+			return 0;
+
+		usleep_range(50, 200);
+	} while (time_before(jiffies, stop_time));
+
+	return -EBUSY;
+}
+
+/*
+ * exynos5_i2c_message_start: Configures the bus and starts the xfer
+ * i2c: struct exynos5_i2c pointer for the current bus
+ * stop: Enables stop after transfer if set. Set for last transfer of
+ *       in the list of messages.
+ *
+ * Configures the bus for read/write function
+ * Sets chip address to talk to, message length to be sent.
+ * Enables appropriate interrupts and sends start xfer command.
+ */
+static void exynos5_i2c_message_start(struct exynos5_i2c *i2c, int stop)
+{
+	u32 i2c_ctl;
+	u32 int_en = HSI2C_INT_I2C_EN;
+	u32 i2c_auto_conf = 0;
+	u32 fifo_ctl;
+	unsigned long flags;
+
+	i2c_ctl = readl(i2c->regs + HSI2C_CTL);
+	i2c_ctl &= ~(HSI2C_TXCHON | HSI2C_RXCHON);
+	fifo_ctl = HSI2C_RXFIFO_EN | HSI2C_TXFIFO_EN;
+
+	if (i2c->msg->flags & I2C_M_RD) {
+		i2c_ctl |= HSI2C_RXCHON;
+
+		i2c_auto_conf = HSI2C_READ_WRITE;
+
+		fifo_ctl |= HSI2C_RXFIFO_TRIGGER_LEVEL(HSI2C_DEF_TXFIFO_LVL);
+		int_en |= (HSI2C_INT_RX_ALMOSTFULL_EN |
+			HSI2C_INT_TRAILING_EN);
+	} else {
+		i2c_ctl |= HSI2C_TXCHON;
+
+		fifo_ctl |= HSI2C_TXFIFO_TRIGGER_LEVEL(HSI2C_DEF_RXFIFO_LVL);
+		int_en |= HSI2C_INT_TX_ALMOSTEMPTY_EN;
+	}
+
+	writel(HSI2C_SLV_ADDR_MAS(i2c->msg->addr), i2c->regs + HSI2C_ADDR);
+
+	writel(fifo_ctl, i2c->regs + HSI2C_FIFO_CTL);
+	writel(i2c_ctl, i2c->regs + HSI2C_CTL);
+
+
+	/*
+	 * Enable interrupts before starting the transfer so that we don't
+	 * miss any INT_I2C interrupts.
+	 */
+	spin_lock_irqsave(&i2c->lock, flags);
+	writel(int_en, i2c->regs + HSI2C_INT_ENABLE);
+
+	if (stop == 1)
+		i2c_auto_conf |= HSI2C_STOP_AFTER_TRANS;
+	i2c_auto_conf |= i2c->msg->len;
+	i2c_auto_conf |= HSI2C_MASTER_RUN;
+	writel(i2c_auto_conf, i2c->regs + HSI2C_AUTO_CONF);
+	spin_unlock_irqrestore(&i2c->lock, flags);
+}
+
+static int exynos5_i2c_xfer_msg(struct exynos5_i2c *i2c,
+			      struct i2c_msg *msgs, int stop)
+{
+	unsigned long timeout;
+	int ret;
+
+	i2c->msg = msgs;
+	i2c->msg_ptr = 0;
+	i2c->trans_done = 0;
+
+	reinit_completion(&i2c->msg_complete);
+
+	exynos5_i2c_message_start(i2c, stop);
+
+	timeout = wait_for_completion_timeout(&i2c->msg_complete,
+					      EXYNOS5_I2C_TIMEOUT);
+	if (timeout == 0)
+		ret = -ETIMEDOUT;
+	else
+		ret = i2c->state;
+
+	/*
+	 * If this is the last message to be transfered (stop == 1)
+	 * Then check if the bus can be brought back to idle.
+	 */
+	if (ret == 0 && stop)
+		ret = exynos5_i2c_wait_bus_idle(i2c);
+
+	if (ret < 0) {
+		exynos5_i2c_reset(i2c);
+		if (ret == -ETIMEDOUT)
+			dev_warn(i2c->dev, "%s timeout\n",
+				 (msgs->flags & I2C_M_RD) ? "rx" : "tx");
+	}
+
+	/* Return the state as in interrupt routine */
+	return ret;
+}
+
+static int exynos5_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg *msgs, int num)
+{
+	struct exynos5_i2c *i2c = (struct exynos5_i2c *)adap->algo_data;
+	int i = 0, ret = 0, stop = 0;
+
+	if (i2c->suspended) {
+		dev_err(i2c->dev, "HS-I2C is not initialzed.\n");
+		return -EIO;
+	}
+
+	clk_prepare_enable(i2c->clk);
+
+	for (i = 0; i < num; i++, msgs++) {
+		stop = (i == num - 1);
+
+		ret = exynos5_i2c_xfer_msg(i2c, msgs, stop);
+
+		if (ret < 0)
+			goto out;
+	}
+
+	if (i == num) {
+		ret = num;
+	} else {
+		/* Only one message, cannot access the device */
+		if (i == 1)
+			ret = -EREMOTEIO;
+		else
+			ret = i;
+
+		dev_warn(i2c->dev, "xfer message failed\n");
+	}
+
+ out:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static u32 exynos5_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
+}
+
+static const struct i2c_algorithm exynos5_i2c_algorithm = {
+	.master_xfer		= exynos5_i2c_xfer,
+	.functionality		= exynos5_i2c_func,
+};
+
+static int exynos5_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct exynos5_i2c *i2c;
+	struct resource *mem;
+	unsigned int op_clock;
+	int ret;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(struct exynos5_i2c), GFP_KERNEL);
+	if (!i2c) {
+		dev_err(&pdev->dev, "no memory for state\n");
+		return -ENOMEM;
+	}
+
+	if (of_property_read_u32(np, "clock-frequency", &op_clock)) {
+		i2c->speed_mode = HSI2C_FAST_SPD;
+		i2c->fs_clock = HSI2C_FS_TX_CLOCK;
+	} else {
+		if (op_clock >= HSI2C_HS_TX_CLOCK) {
+			i2c->speed_mode = HSI2C_HIGH_SPD;
+			i2c->fs_clock = HSI2C_FS_TX_CLOCK;
+			i2c->hs_clock = op_clock;
+		} else {
+			i2c->speed_mode = HSI2C_FAST_SPD;
+			i2c->fs_clock = op_clock;
+		}
+	}
+
+	strlcpy(i2c->adap.name, "exynos5-i2c", sizeof(i2c->adap.name));
+	i2c->adap.owner   = THIS_MODULE;
+	i2c->adap.algo    = &exynos5_i2c_algorithm;
+	i2c->adap.retries = 3;
+
+	i2c->dev = &pdev->dev;
+	i2c->clk = devm_clk_get(&pdev->dev, "hsi2c");
+	if (IS_ERR(i2c->clk)) {
+		dev_err(&pdev->dev, "cannot get clock\n");
+		return -ENOENT;
+	}
+
+	clk_prepare_enable(i2c->clk);
+
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->regs = devm_ioremap_resource(&pdev->dev, mem);
+	if (IS_ERR(i2c->regs)) {
+		ret = PTR_ERR(i2c->regs);
+		goto err_clk;
+	}
+
+	i2c->adap.dev.of_node = np;
+	i2c->adap.algo_data = i2c;
+	i2c->adap.dev.parent = &pdev->dev;
+
+	/* Clear pending interrupts from u-boot or misc causes */
+	exynos5_i2c_clr_pend_irq(i2c);
+
+	spin_lock_init(&i2c->lock);
+	init_completion(&i2c->msg_complete);
+
+	i2c->irq = ret = platform_get_irq(pdev, 0);
+	if (ret <= 0) {
+		dev_err(&pdev->dev, "cannot find HS-I2C IRQ\n");
+		ret = -EINVAL;
+		goto err_clk;
+	}
+
+	ret = devm_request_irq(&pdev->dev, i2c->irq, exynos5_i2c_irq,
+				IRQF_NO_SUSPEND | IRQF_ONESHOT,
+				dev_name(&pdev->dev), i2c);
+
+	if (ret != 0) {
+		dev_err(&pdev->dev, "cannot request HS-I2C IRQ %d\n", i2c->irq);
+		goto err_clk;
+	}
+
+	ret = exynos5_hsi2c_clock_setup(i2c);
+	if (ret)
+		goto err_clk;
+
+	exynos5_i2c_init(i2c);
+
+	ret = i2c_add_adapter(&i2c->adap);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add bus to i2c core\n");
+		goto err_clk;
+	}
+
+	platform_set_drvdata(pdev, i2c);
+
+ err_clk:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int exynos5_i2c_remove(struct platform_device *pdev)
+{
+	struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+
+	return 0;
+}
+
+static int exynos5_i2c_suspend_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c->suspended = 1;
+
+	return 0;
+}
+
+static int exynos5_i2c_resume_noirq(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct exynos5_i2c *i2c = platform_get_drvdata(pdev);
+	int ret = 0;
+
+	clk_prepare_enable(i2c->clk);
+
+	ret = exynos5_hsi2c_clock_setup(i2c);
+	if (ret) {
+		clk_disable_unprepare(i2c->clk);
+		return ret;
+	}
+
+	exynos5_i2c_init(i2c);
+	clk_disable_unprepare(i2c->clk);
+	i2c->suspended = 0;
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(exynos5_i2c_dev_pm_ops, exynos5_i2c_suspend_noirq,
+			 exynos5_i2c_resume_noirq);
+
+static struct platform_driver exynos5_i2c_driver = {
+	.probe		= exynos5_i2c_probe,
+	.remove		= exynos5_i2c_remove,
+	.driver		= {
+		.owner	= THIS_MODULE,
+		.name	= "exynos5-hsi2c",
+		.pm	= &exynos5_i2c_dev_pm_ops,
+		.of_match_table = exynos5_i2c_match,
+	},
+};
+
+module_platform_driver(exynos5_i2c_driver);
+
+MODULE_DESCRIPTION("Exynos5 HS-I2C Bus driver");
+MODULE_AUTHOR("Naveen Krishna Chatradhi, <ch.naveen@samsung.com>");
+MODULE_AUTHOR("Taekgyun Ko, <taeggyun.ko@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index bc6e139..d9f7e18 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -15,8 +15,8 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
+#include <linux/of.h>
 #include <linux/of_gpio.h>
-#include <linux/of_i2c.h>
 
 struct i2c_gpio_private_data {
 	struct i2c_adapter adap;
@@ -137,9 +137,9 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 		if (ret)
 			return ret;
 	} else {
-		if (!pdev->dev.platform_data)
+		if (!dev_get_platdata(&pdev->dev))
 			return -ENXIO;
-		pdata = pdev->dev.platform_data;
+		pdata = dev_get_platdata(&pdev->dev);
 		sda_pin = pdata->sda_pin;
 		scl_pin = pdata->scl_pin;
 	}
@@ -171,7 +171,7 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 		pdata->scl_pin = scl_pin;
 		of_i2c_gpio_get_props(pdev->dev.of_node, pdata);
 	} else {
-		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
+		memcpy(pdata, dev_get_platdata(&pdev->dev), sizeof(*pdata));
 	}
 
 	if (pdata->sda_is_open_drain) {
@@ -224,8 +224,6 @@ static int i2c_gpio_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_bus;
 
-	of_i2c_register_devices(adap);
-
 	platform_set_drvdata(pdev, priv);
 
 	dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n",
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 3a6903f..737e298 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -58,6 +58,8 @@
   Wellsburg (PCH) MS    0x8d7d     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7e     32     hard     yes     yes     yes
   Wellsburg (PCH) MS    0x8d7f     32     hard     yes     yes     yes
+  Coleto Creek (PCH)    0x23b0     32     hard     yes     yes     yes
+  Wildcat Point-LP (PCH)   0x9ca2     32     hard     yes     yes     yes
 
   Features supported by this driver:
   Software PEC                     no
@@ -86,7 +88,6 @@
 #include <linux/slab.h>
 #include <linux/wait.h>
 #include <linux/err.h>
-#include <linux/of_i2c.h>
 
 #if (defined CONFIG_I2C_MUX_GPIO || defined CONFIG_I2C_MUX_GPIO_MODULE) && \
 		defined CONFIG_DMI
@@ -169,6 +170,7 @@
 #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS	0x1e22
 #define PCI_DEVICE_ID_INTEL_AVOTON_SMBUS	0x1f3c
 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS	0x2330
+#define PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS	0x23b0
 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS	0x3b30
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS	0x8c22
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS	0x8d22
@@ -176,6 +178,7 @@
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1	0x8d7e
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2	0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS	0x9c22
+#define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -817,6 +820,8 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS0) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS1) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_COLETOCREEK_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ 0, }
 };
 
@@ -1227,7 +1232,6 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto exit_free_irq;
 	}
 
-	of_i2c_register_devices(&priv->adapter);
 	i801_probe_optional_slaves(priv);
 	/* We ignore errors - multiplexing is optional */
 	i801_add_mux(priv);
diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c
index 405a2e2..f744410 100644
--- a/drivers/i2c/busses/i2c-ibm_iic.c
+++ b/drivers/i2c/busses/i2c-ibm_iic.c
@@ -41,8 +41,9 @@
 #include <asm/irq.h>
 #include <linux/io.h>
 #include <linux/i2c.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
 
 #include "i2c-ibm_iic.h"
 
@@ -705,7 +706,7 @@ static int iic_probe(struct platform_device *ofdev)
 		return -ENOMEM;
 	}
 
-	dev_set_drvdata(&ofdev->dev, dev);
+	platform_set_drvdata(ofdev, dev);
 
 	dev->vaddr = of_iomap(np, 0);
 	if (dev->vaddr == NULL) {
@@ -759,9 +760,6 @@ static int iic_probe(struct platform_device *ofdev)
 	dev_info(&ofdev->dev, "using %s mode\n",
 		 dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)");
 
-	/* Now register all the child nodes */
-	of_i2c_register_devices(adap);
-
 	return 0;
 
 error_cleanup:
@@ -782,7 +780,7 @@ error_cleanup:
  */
 static int iic_remove(struct platform_device *ofdev)
 {
-	struct ibm_iic_private *dev = dev_get_drvdata(&ofdev->dev);
+	struct ibm_iic_private *dev = platform_get_drvdata(ofdev);
 
 	i2c_del_adapter(&dev->adap);
 
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 82f20c6..1d7efa3 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -30,6 +30,8 @@
  *	Copyright (C) 2007 RightHand Technologies, Inc.
  *	Copyright (C) 2008 Darius Augulis <darius.augulis at teltonika.lt>
  *
+ *	Copyright 2013 Freescale Semiconductor, Inc.
+ *
  */
 
 /** Includes *******************************************************************
@@ -50,8 +52,6 @@
 #include <linux/slab.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/platform_data/i2c-imx.h>
 
 /** Defines ********************************************************************
@@ -63,12 +63,22 @@
 /* Default value */
 #define IMX_I2C_BIT_RATE	100000	/* 100kHz */
 
-/* IMX I2C registers */
+/* IMX I2C registers:
+ * the I2C register offset is different between SoCs,
+ * to provid support for all these chips, split the
+ * register offset into a fixed base address and a
+ * variable shift value, then the full register offset
+ * will be calculated by
+ * reg_off = ( reg_base_addr << reg_shift)
+ */
 #define IMX_I2C_IADR	0x00	/* i2c slave address */
-#define IMX_I2C_IFDR	0x04	/* i2c frequency divider */
-#define IMX_I2C_I2CR	0x08	/* i2c control */
-#define IMX_I2C_I2SR	0x0C	/* i2c status */
-#define IMX_I2C_I2DR	0x10	/* i2c transfer data */
+#define IMX_I2C_IFDR	0x01	/* i2c frequency divider */
+#define IMX_I2C_I2CR	0x02	/* i2c control */
+#define IMX_I2C_I2SR	0x03	/* i2c status */
+#define IMX_I2C_I2DR	0x04	/* i2c transfer data */
+
+#define IMX_I2C_REGSHIFT	2
+#define VF610_I2C_REGSHIFT	0
 
 /* Bits of IMX I2C registers */
 #define I2SR_RXAK	0x01
@@ -85,6 +95,19 @@
 #define I2CR_IIEN	0x40
 #define I2CR_IEN	0x80
 
+/* register bits different operating codes definition:
+ * 1) I2SR: Interrupt flags clear operation differ between SoCs:
+ * - write zero to clear(w0c) INT flag on i.MX,
+ * - but write one to clear(w1c) INT flag on Vybrid.
+ * 2) I2CR: I2C module enable operation also differ between SoCs:
+ * - set I2CR_IEN bit enable the module on i.MX,
+ * - but clear I2CR_IEN bit enable the module on Vybrid.
+ */
+#define I2SR_CLR_OPCODE_W0C	0x0
+#define I2SR_CLR_OPCODE_W1C	(I2SR_IAL | I2SR_IIF)
+#define I2CR_IEN_OPCODE_0	0x0
+#define I2CR_IEN_OPCODE_1	I2CR_IEN
+
 /** Variables ******************************************************************
 *******************************************************************************/
 
@@ -96,8 +119,12 @@
  *
  * Duplicated divider values removed from list
  */
+struct imx_i2c_clk_pair {
+	u16	div;
+	u16	val;
+};
 
-static u16 __initdata i2c_clk_div[50][2] = {
+static struct imx_i2c_clk_pair imx_i2c_clk_div[] = {
 	{ 22,	0x20 }, { 24,	0x21 }, { 26,	0x22 }, { 28,	0x23 },
 	{ 30,	0x00 },	{ 32,	0x24 }, { 36,	0x25 }, { 40,	0x26 },
 	{ 42,	0x03 }, { 44,	0x27 },	{ 48,	0x28 }, { 52,	0x05 },
@@ -113,9 +140,38 @@ static u16 __initdata i2c_clk_div[50][2] = {
 	{ 3072,	0x1E }, { 3840,	0x1F }
 };
 
+/* Vybrid VF610 clock divider, register value pairs */
+static struct imx_i2c_clk_pair vf610_i2c_clk_div[] = {
+	{ 20,   0x00 }, { 22,   0x01 }, { 24,   0x02 }, { 26,   0x03 },
+	{ 28,   0x04 }, { 30,   0x05 }, { 32,   0x09 }, { 34,   0x06 },
+	{ 36,   0x0A }, { 40,   0x07 }, { 44,   0x0C }, { 48,   0x0D },
+	{ 52,   0x43 }, { 56,   0x0E }, { 60,   0x45 }, { 64,   0x12 },
+	{ 68,   0x0F }, { 72,   0x13 }, { 80,   0x14 }, { 88,   0x15 },
+	{ 96,   0x19 }, { 104,  0x16 }, { 112,  0x1A }, { 128,  0x17 },
+	{ 136,  0x4F }, { 144,  0x1C }, { 160,  0x1D }, { 176,  0x55 },
+	{ 192,  0x1E }, { 208,  0x56 }, { 224,  0x22 }, { 228,  0x24 },
+	{ 240,  0x1F }, { 256,  0x23 }, { 288,  0x5C }, { 320,  0x25 },
+	{ 384,  0x26 }, { 448,  0x2A }, { 480,  0x27 }, { 512,  0x2B },
+	{ 576,  0x2C }, { 640,  0x2D }, { 768,  0x31 }, { 896,  0x32 },
+	{ 960,  0x2F }, { 1024, 0x33 }, { 1152, 0x34 }, { 1280, 0x35 },
+	{ 1536, 0x36 }, { 1792, 0x3A }, { 1920, 0x37 }, { 2048, 0x3B },
+	{ 2304, 0x3C }, { 2560, 0x3D }, { 3072, 0x3E }, { 3584, 0x7A },
+	{ 3840, 0x3F }, { 4096, 0x7B }, { 5120, 0x7D }, { 6144, 0x7E },
+};
+
 enum imx_i2c_type {
 	IMX1_I2C,
 	IMX21_I2C,
+	VF610_I2C,
+};
+
+struct imx_i2c_hwdata {
+	enum imx_i2c_type	devtype;
+	unsigned		regshift;
+	struct imx_i2c_clk_pair	*clk_div;
+	unsigned		ndivs;
+	unsigned		i2sr_clr_opcode;
+	unsigned		i2cr_ien_opcode;
 };
 
 struct imx_i2c_struct {
@@ -127,16 +183,46 @@ struct imx_i2c_struct {
 	unsigned int 		disable_delay;
 	int			stopped;
 	unsigned int		ifdr; /* IMX_I2C_IFDR */
-	enum imx_i2c_type	devtype;
+	const struct imx_i2c_hwdata	*hwdata;
+};
+
+static const struct imx_i2c_hwdata imx1_i2c_hwdata  = {
+	.devtype		= IMX1_I2C,
+	.regshift		= IMX_I2C_REGSHIFT,
+	.clk_div		= imx_i2c_clk_div,
+	.ndivs			= ARRAY_SIZE(imx_i2c_clk_div),
+	.i2sr_clr_opcode	= I2SR_CLR_OPCODE_W0C,
+	.i2cr_ien_opcode	= I2CR_IEN_OPCODE_1,
+
+};
+
+static const struct imx_i2c_hwdata imx21_i2c_hwdata  = {
+	.devtype		= IMX21_I2C,
+	.regshift		= IMX_I2C_REGSHIFT,
+	.clk_div		= imx_i2c_clk_div,
+	.ndivs			= ARRAY_SIZE(imx_i2c_clk_div),
+	.i2sr_clr_opcode	= I2SR_CLR_OPCODE_W0C,
+	.i2cr_ien_opcode	= I2CR_IEN_OPCODE_1,
+
+};
+
+static struct imx_i2c_hwdata vf610_i2c_hwdata = {
+	.devtype		= VF610_I2C,
+	.regshift		= VF610_I2C_REGSHIFT,
+	.clk_div		= vf610_i2c_clk_div,
+	.ndivs			= ARRAY_SIZE(vf610_i2c_clk_div),
+	.i2sr_clr_opcode	= I2SR_CLR_OPCODE_W1C,
+	.i2cr_ien_opcode	= I2CR_IEN_OPCODE_0,
+
 };
 
 static struct platform_device_id imx_i2c_devtype[] = {
 	{
 		.name = "imx1-i2c",
-		.driver_data = IMX1_I2C,
+		.driver_data = (kernel_ulong_t)&imx1_i2c_hwdata,
 	}, {
 		.name = "imx21-i2c",
-		.driver_data = IMX21_I2C,
+		.driver_data = (kernel_ulong_t)&imx21_i2c_hwdata,
 	}, {
 		/* sentinel */
 	}
@@ -144,14 +230,28 @@ static struct platform_device_id imx_i2c_devtype[] = {
 MODULE_DEVICE_TABLE(platform, imx_i2c_devtype);
 
 static const struct of_device_id i2c_imx_dt_ids[] = {
-	{ .compatible = "fsl,imx1-i2c", .data = &imx_i2c_devtype[IMX1_I2C], },
-	{ .compatible = "fsl,imx21-i2c", .data = &imx_i2c_devtype[IMX21_I2C], },
+	{ .compatible = "fsl,imx1-i2c", .data = &imx1_i2c_hwdata, },
+	{ .compatible = "fsl,imx21-i2c", .data = &imx21_i2c_hwdata, },
+	{ .compatible = "fsl,vf610-i2c", .data = &vf610_i2c_hwdata, },
 	{ /* sentinel */ }
 };
+MODULE_DEVICE_TABLE(of, i2c_imx_dt_ids);
 
 static inline int is_imx1_i2c(struct imx_i2c_struct *i2c_imx)
 {
-	return i2c_imx->devtype == IMX1_I2C;
+	return i2c_imx->hwdata->devtype == IMX1_I2C;
+}
+
+static inline void imx_i2c_write_reg(unsigned int val,
+		struct imx_i2c_struct *i2c_imx, unsigned int reg)
+{
+	writeb(val, i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
+}
+
+static inline unsigned char imx_i2c_read_reg(struct imx_i2c_struct *i2c_imx,
+		unsigned int reg)
+{
+	return readb(i2c_imx->base + (reg << i2c_imx->hwdata->regshift));
 }
 
 /** Functions for IMX I2C adapter driver ***************************************
@@ -165,7 +265,7 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy)
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
 	while (1) {
-		temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
 		if (for_busy && (temp & I2SR_IBB))
 			break;
 		if (!for_busy && !(temp & I2SR_IBB))
@@ -196,7 +296,7 @@ static int i2c_imx_trx_complete(struct imx_i2c_struct *i2c_imx)
 
 static int i2c_imx_acked(struct imx_i2c_struct *i2c_imx)
 {
-	if (readb(i2c_imx->base + IMX_I2C_I2SR) & I2SR_RXAK) {
+	if (imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR) & I2SR_RXAK) {
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> No ACK\n", __func__);
 		return -EIO;  /* No ACK */
 	}
@@ -213,25 +313,25 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx)
 	dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
 
 	clk_prepare_enable(i2c_imx->clk);
-	writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR);
+	imx_i2c_write_reg(i2c_imx->ifdr, i2c_imx, IMX_I2C_IFDR);
 	/* Enable I2C controller */
-	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
-	writeb(I2CR_IEN, i2c_imx->base + IMX_I2C_I2CR);
+	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
+	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode, i2c_imx, IMX_I2C_I2CR);
 
 	/* Wait controller to be stable */
 	udelay(50);
 
 	/* Start I2C transaction */
-	temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 	temp |= I2CR_MSTA;
-	writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 	result = i2c_imx_bus_busy(i2c_imx, 1);
 	if (result)
 		return result;
 	i2c_imx->stopped = 0;
 
 	temp |= I2CR_IIEN | I2CR_MTX | I2CR_TXAK;
-	writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 	return result;
 }
 
@@ -242,9 +342,9 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 	if (!i2c_imx->stopped) {
 		/* Stop I2C transaction */
 		dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__);
-		temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 		temp &= ~(I2CR_MSTA | I2CR_MTX);
-		writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 	}
 	if (is_imx1_i2c(i2c_imx)) {
 		/*
@@ -260,13 +360,15 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx)
 	}
 
 	/* Disable I2C controller */
-	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
+	temp = i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 	clk_disable_unprepare(i2c_imx->clk);
 }
 
-static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
+static void i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
 							unsigned int rate)
 {
+	struct imx_i2c_clk_pair *i2c_clk_div = i2c_imx->hwdata->clk_div;
 	unsigned int i2c_clk_rate;
 	unsigned int div;
 	int i;
@@ -274,15 +376,15 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
 	/* Divider value calculation */
 	i2c_clk_rate = clk_get_rate(i2c_imx->clk);
 	div = (i2c_clk_rate + rate - 1) / rate;
-	if (div < i2c_clk_div[0][0])
+	if (div < i2c_clk_div[0].div)
 		i = 0;
-	else if (div > i2c_clk_div[ARRAY_SIZE(i2c_clk_div) - 1][0])
-		i = ARRAY_SIZE(i2c_clk_div) - 1;
+	else if (div > i2c_clk_div[i2c_imx->hwdata->ndivs - 1].div)
+		i = i2c_imx->hwdata->ndivs - 1;
 	else
-		for (i = 0; i2c_clk_div[i][0] < div; i++);
+		for (i = 0; i2c_clk_div[i].div < div; i++);
 
 	/* Store divider value */
-	i2c_imx->ifdr = i2c_clk_div[i][1];
+	i2c_imx->ifdr = i2c_clk_div[i].val;
 
 	/*
 	 * There dummy delay is calculated.
@@ -290,7 +392,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
 	 * This delay is used in I2C bus disable function
 	 * to fix chip hardware bug.
 	 */
-	i2c_imx->disable_delay = (500000U * i2c_clk_div[i][0]
+	i2c_imx->disable_delay = (500000U * i2c_clk_div[i].div
 		+ (i2c_clk_rate / 2) - 1) / (i2c_clk_rate / 2);
 
 	/* dev_dbg() can't be used, because adapter is not yet registered */
@@ -298,7 +400,7 @@ static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx,
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C_CLK=%d, REQ DIV=%d\n",
 		__func__, i2c_clk_rate, div);
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> IFDR[IC]=0x%x, REAL DIV=%d\n",
-		__func__, i2c_clk_div[i][1], i2c_clk_div[i][0]);
+		__func__, i2c_clk_div[i].val, i2c_clk_div[i].div);
 #endif
 }
 
@@ -307,12 +409,13 @@ static irqreturn_t i2c_imx_isr(int irq, void *dev_id)
 	struct imx_i2c_struct *i2c_imx = dev_id;
 	unsigned int temp;
 
-	temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
 	if (temp & I2SR_IIF) {
 		/* save status register */
 		i2c_imx->i2csr = temp;
 		temp &= ~I2SR_IIF;
-		writeb(temp, i2c_imx->base + IMX_I2C_I2SR);
+		temp |= (i2c_imx->hwdata->i2sr_clr_opcode & I2SR_IIF);
+		imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2SR);
 		wake_up(&i2c_imx->queue);
 		return IRQ_HANDLED;
 	}
@@ -328,7 +431,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 		__func__, msgs->addr << 1);
 
 	/* write slave address */
-	writeb(msgs->addr << 1, i2c_imx->base + IMX_I2C_I2DR);
+	imx_i2c_write_reg(msgs->addr << 1, i2c_imx, IMX_I2C_I2DR);
 	result = i2c_imx_trx_complete(i2c_imx);
 	if (result)
 		return result;
@@ -342,7 +445,7 @@ static int i2c_imx_write(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 		dev_dbg(&i2c_imx->adapter.dev,
 			"<%s> write byte: B%d=0x%X\n",
 			__func__, i, msgs->buf[i]);
-		writeb(msgs->buf[i], i2c_imx->base + IMX_I2C_I2DR);
+		imx_i2c_write_reg(msgs->buf[i], i2c_imx, IMX_I2C_I2DR);
 		result = i2c_imx_trx_complete(i2c_imx);
 		if (result)
 			return result;
@@ -363,7 +466,7 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 		__func__, (msgs->addr << 1) | 0x01);
 
 	/* write slave address */
-	writeb((msgs->addr << 1) | 0x01, i2c_imx->base + IMX_I2C_I2DR);
+	imx_i2c_write_reg((msgs->addr << 1) | 0x01, i2c_imx, IMX_I2C_I2DR);
 	result = i2c_imx_trx_complete(i2c_imx);
 	if (result)
 		return result;
@@ -374,12 +477,12 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> setup bus\n", __func__);
 
 	/* setup bus to read data */
-	temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+	temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 	temp &= ~I2CR_MTX;
 	if (msgs->len - 1)
 		temp &= ~I2CR_TXAK;
-	writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
-	readb(i2c_imx->base + IMX_I2C_I2DR); /* dummy read */
+	imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
+	imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR); /* dummy read */
 
 	dev_dbg(&i2c_imx->adapter.dev, "<%s> read data\n", __func__);
 
@@ -393,19 +496,19 @@ static int i2c_imx_read(struct imx_i2c_struct *i2c_imx, struct i2c_msg *msgs)
 			   controller from generating another clock cycle */
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> clear MSTA\n", __func__);
-			temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+			temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 			temp &= ~(I2CR_MSTA | I2CR_MTX);
-			writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 			i2c_imx_bus_busy(i2c_imx, 0);
 			i2c_imx->stopped = 1;
 		} else if (i == (msgs->len - 2)) {
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> set TXAK\n", __func__);
-			temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+			temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 			temp |= I2CR_TXAK;
-			writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 		}
-		msgs->buf[i] = readb(i2c_imx->base + IMX_I2C_I2DR);
+		msgs->buf[i] = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
 		dev_dbg(&i2c_imx->adapter.dev,
 			"<%s> read byte: B%d=0x%X\n",
 			__func__, i, msgs->buf[i]);
@@ -432,9 +535,9 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 		if (i) {
 			dev_dbg(&i2c_imx->adapter.dev,
 				"<%s> repeated start\n", __func__);
-			temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+			temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 			temp |= I2CR_RSTA;
-			writeb(temp, i2c_imx->base + IMX_I2C_I2CR);
+			imx_i2c_write_reg(temp, i2c_imx, IMX_I2C_I2CR);
 			result =  i2c_imx_bus_busy(i2c_imx, 1);
 			if (result)
 				goto fail0;
@@ -443,13 +546,13 @@ static int i2c_imx_xfer(struct i2c_adapter *adapter,
 			"<%s> transfer message: %d\n", __func__, i);
 		/* write/read data */
 #ifdef CONFIG_I2C_DEBUG_BUS
-		temp = readb(i2c_imx->base + IMX_I2C_I2CR);
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2CR);
 		dev_dbg(&i2c_imx->adapter.dev, "<%s> CONTROL: IEN=%d, IIEN=%d, "
 			"MSTA=%d, MTX=%d, TXAK=%d, RSTA=%d\n", __func__,
 			(temp & I2CR_IEN ? 1 : 0), (temp & I2CR_IIEN ? 1 : 0),
 			(temp & I2CR_MSTA ? 1 : 0), (temp & I2CR_MTX ? 1 : 0),
 			(temp & I2CR_TXAK ? 1 : 0), (temp & I2CR_RSTA ? 1 : 0));
-		temp = readb(i2c_imx->base + IMX_I2C_I2SR);
+		temp = imx_i2c_read_reg(i2c_imx, IMX_I2C_I2SR);
 		dev_dbg(&i2c_imx->adapter.dev,
 			"<%s> STATUS: ICF=%d, IAAS=%d, IBB=%d, "
 			"IAL=%d, SRW=%d, IIF=%d, RXAK=%d\n", __func__,
@@ -486,31 +589,26 @@ static struct i2c_algorithm i2c_imx_algo = {
 	.functionality	= i2c_imx_func,
 };
 
-static int __init i2c_imx_probe(struct platform_device *pdev)
+static int i2c_imx_probe(struct platform_device *pdev)
 {
 	const struct of_device_id *of_id = of_match_device(i2c_imx_dt_ids,
 							   &pdev->dev);
 	struct imx_i2c_struct *i2c_imx;
 	struct resource *res;
-	struct imxi2c_platform_data *pdata = pdev->dev.platform_data;
-	struct pinctrl *pinctrl;
+	struct imxi2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	void __iomem *base;
 	int irq, ret;
 	u32 bitrate;
 
 	dev_dbg(&pdev->dev, "<%s>\n", __func__);
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "can't get device resources\n");
-		return -ENOENT;
-	}
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		dev_err(&pdev->dev, "can't get irq number\n");
 		return -ENOENT;
 	}
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(base))
 		return PTR_ERR(base);
@@ -523,8 +621,10 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	}
 
 	if (of_id)
-		pdev->id_entry = of_id->data;
-	i2c_imx->devtype = pdev->id_entry->driver_data;
+		i2c_imx->hwdata = of_id->data;
+	else
+		i2c_imx->hwdata = (struct imx_i2c_hwdata *)
+				platform_get_device_id(pdev)->driver_data;
 
 	/* Setup i2c_imx driver structure */
 	strlcpy(i2c_imx->adapter.name, pdev->name, sizeof(i2c_imx->adapter.name));
@@ -535,12 +635,6 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx->adapter.dev.of_node	= pdev->dev.of_node;
 	i2c_imx->base			= base;
 
-	pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(pinctrl)) {
-		dev_err(&pdev->dev, "can't get/select pinctrl\n");
-		return PTR_ERR(pinctrl);
-	}
-
 	/* Get I2C clock */
 	i2c_imx->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(i2c_imx->clk)) {
@@ -548,6 +642,11 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		return PTR_ERR(i2c_imx->clk);
 	}
 
+	ret = clk_prepare_enable(i2c_imx->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "can't enable I2C clock\n");
+		return ret;
+	}
 	/* Request IRQ */
 	ret = devm_request_irq(&pdev->dev, irq, i2c_imx_isr, 0,
 				pdev->name, i2c_imx);
@@ -571,8 +670,9 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	i2c_imx_set_clk(i2c_imx, bitrate);
 
 	/* Set up chip registers to defaults */
-	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
-	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+	imx_i2c_write_reg(i2c_imx->hwdata->i2cr_ien_opcode ^ I2CR_IEN,
+			i2c_imx, IMX_I2C_I2CR);
+	imx_i2c_write_reg(i2c_imx->hwdata->i2sr_clr_opcode, i2c_imx, IMX_I2C_I2SR);
 
 	/* Add I2C adapter */
 	ret = i2c_add_numbered_adapter(&i2c_imx->adapter);
@@ -581,10 +681,9 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	of_i2c_register_devices(&i2c_imx->adapter);
-
 	/* Set up platform driver data */
 	platform_set_drvdata(pdev, i2c_imx);
+	clk_disable_unprepare(i2c_imx->clk);
 
 	dev_dbg(&i2c_imx->adapter.dev, "claimed irq %d\n", irq);
 	dev_dbg(&i2c_imx->adapter.dev, "device resources from 0x%x to 0x%x\n",
@@ -598,7 +697,7 @@ static int __init i2c_imx_probe(struct platform_device *pdev)
 	return 0;   /* Return OK */
 }
 
-static int __exit i2c_imx_remove(struct platform_device *pdev)
+static int i2c_imx_remove(struct platform_device *pdev)
 {
 	struct imx_i2c_struct *i2c_imx = platform_get_drvdata(pdev);
 
@@ -607,16 +706,17 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
 	i2c_del_adapter(&i2c_imx->adapter);
 
 	/* setup chip registers to defaults */
-	writeb(0, i2c_imx->base + IMX_I2C_IADR);
-	writeb(0, i2c_imx->base + IMX_I2C_IFDR);
-	writeb(0, i2c_imx->base + IMX_I2C_I2CR);
-	writeb(0, i2c_imx->base + IMX_I2C_I2SR);
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IADR);
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_IFDR);
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2CR);
+	imx_i2c_write_reg(0, i2c_imx, IMX_I2C_I2SR);
 
 	return 0;
 }
 
 static struct platform_driver i2c_imx_driver = {
-	.remove		= __exit_p(i2c_imx_remove),
+	.probe = i2c_imx_probe,
+	.remove = i2c_imx_remove,
 	.driver	= {
 		.name	= DRIVER_NAME,
 		.owner	= THIS_MODULE,
@@ -627,7 +727,7 @@ static struct platform_driver i2c_imx_driver = {
 
 static int __init i2c_adap_imx_init(void)
 {
-	return platform_driver_probe(&i2c_imx_driver, i2c_imx_probe);
+	return platform_driver_register(&i2c_imx_driver);
 }
 subsys_initcall(i2c_adap_imx_init);
 
diff --git a/drivers/i2c/busses/i2c-intel-mid.c b/drivers/i2c/busses/i2c-intel-mid.c
deleted file mode 100644
index 0fb6597..0000000
--- a/drivers/i2c/busses/i2c-intel-mid.c
+++ /dev/null
@@ -1,1121 +0,0 @@
-/*
- * Support for Moorestown/Medfield I2C chip
- *
- * Copyright (c) 2009 Intel Corporation.
- * Copyright (c) 2009 Synopsys. Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License, version
- * 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT ANY
- * WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
- * FOR A PARTICULAR PURPOSE.  See the GNU General Public License for more
- * details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc., 51
- * Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- *
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-#include <linux/stat.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/pm_runtime.h>
-#include <linux/io.h>
-
-#define DRIVER_NAME	"i2c-intel-mid"
-#define VERSION		"Version 0.5ac2"
-#define PLATFORM	"Moorestown/Medfield"
-
-/* Tables use: 0 Moorestown, 1 Medfield */
-#define NUM_PLATFORMS	2
-enum platform_enum {
-	MOORESTOWN = 0,
-	MEDFIELD = 1,
-};
-
-enum mid_i2c_status {
-	STATUS_IDLE = 0,
-	STATUS_READ_START,
-	STATUS_READ_IN_PROGRESS,
-	STATUS_READ_SUCCESS,
-	STATUS_WRITE_START,
-	STATUS_WRITE_SUCCESS,
-	STATUS_XFER_ABORT,
-	STATUS_STANDBY
-};
-
-/**
- * struct intel_mid_i2c_private	- per device I²C context
- * @adap: core i2c layer adapter information
- * @dev: device reference for power management
- * @base: register base
- * @speed: speed mode for this port
- * @complete: completion object for transaction wait
- * @abort: reason for last abort
- * @rx_buf: pointer into working receive buffer
- * @rx_buf_len: receive buffer length
- * @status: adapter state machine
- * @msg: the message we are currently processing
- * @platform: the MID device type we are part of
- * @lock: transaction serialization
- *
- * We allocate one of these per device we discover, it holds the core
- * i2c layer objects and the data we need to track privately.
- */
-struct intel_mid_i2c_private {
-	struct i2c_adapter adap;
-	struct device *dev;
-	void __iomem *base;
-	int speed;
-	struct completion complete;
-	int abort;
-	u8 *rx_buf;
-	int rx_buf_len;
-	enum mid_i2c_status status;
-	struct i2c_msg *msg;
-	enum platform_enum platform;
-	struct mutex lock;
-};
-
-#define NUM_SPEEDS		3
-
-#define ACTIVE			0
-#define STANDBY			1
-
-
-/* Control register */
-#define IC_CON			0x00
-#define SLV_DIS			(1 << 6)	/* Disable slave mode */
-#define RESTART			(1 << 5)	/* Send a Restart condition */
-#define	ADDR_10BIT		(1 << 4)	/* 10-bit addressing */
-#define	STANDARD_MODE		(1 << 1)	/* standard mode */
-#define FAST_MODE		(2 << 1)	/* fast mode */
-#define HIGH_MODE		(3 << 1)	/* high speed mode */
-#define	MASTER_EN		(1 << 0)	/* Master mode */
-
-/* Target address register */
-#define IC_TAR			0x04
-#define IC_TAR_10BIT_ADDR	(1 << 12)	/* 10-bit addressing */
-#define IC_TAR_SPECIAL		(1 << 11)	/* Perform special I2C cmd */
-#define IC_TAR_GC_OR_START	(1 << 10)	/* 0: Gerneral Call Address */
-						/* 1: START BYTE */
-/* Slave Address Register */
-#define IC_SAR			0x08		/* Not used in Master mode */
-
-/* High Speed Master Mode Code Address Register */
-#define IC_HS_MADDR		0x0c
-
-/* Rx/Tx Data Buffer and Command Register */
-#define IC_DATA_CMD		0x10
-#define IC_RD			(1 << 8)	/* 1: Read 0: Write */
-
-/* Standard Speed Clock SCL High Count Register */
-#define IC_SS_SCL_HCNT		0x14
-
-/* Standard Speed Clock SCL Low Count Register */
-#define IC_SS_SCL_LCNT		0x18
-
-/* Fast Speed Clock SCL High Count Register */
-#define IC_FS_SCL_HCNT		0x1c
-
-/* Fast Spedd Clock SCL Low Count Register */
-#define IC_FS_SCL_LCNT		0x20
-
-/* High Speed Clock SCL High Count Register */
-#define IC_HS_SCL_HCNT		0x24
-
-/* High Speed Clock SCL Low Count Register */
-#define IC_HS_SCL_LCNT		0x28
-
-/* Interrupt Status Register */
-#define IC_INTR_STAT		0x2c		/* Read only */
-#define R_GEN_CALL		(1 << 11)
-#define R_START_DET		(1 << 10)
-#define R_STOP_DET		(1 << 9)
-#define R_ACTIVITY		(1 << 8)
-#define R_RX_DONE		(1 << 7)
-#define	R_TX_ABRT		(1 << 6)
-#define R_RD_REQ		(1 << 5)
-#define R_TX_EMPTY		(1 << 4)
-#define R_TX_OVER		(1 << 3)
-#define	R_RX_FULL		(1 << 2)
-#define	R_RX_OVER		(1 << 1)
-#define R_RX_UNDER		(1 << 0)
-
-/* Interrupt Mask Register */
-#define IC_INTR_MASK		0x30		/* Read and Write */
-#define M_GEN_CALL		(1 << 11)
-#define M_START_DET		(1 << 10)
-#define M_STOP_DET		(1 << 9)
-#define M_ACTIVITY		(1 << 8)
-#define M_RX_DONE		(1 << 7)
-#define	M_TX_ABRT		(1 << 6)
-#define M_RD_REQ		(1 << 5)
-#define M_TX_EMPTY		(1 << 4)
-#define M_TX_OVER		(1 << 3)
-#define	M_RX_FULL		(1 << 2)
-#define	M_RX_OVER		(1 << 1)
-#define M_RX_UNDER		(1 << 0)
-
-/* Raw Interrupt Status Register */
-#define IC_RAW_INTR_STAT	0x34		/* Read Only */
-#define GEN_CALL		(1 << 11)	/* General call */
-#define START_DET		(1 << 10)	/* (RE)START occurred */
-#define STOP_DET		(1 << 9)	/* STOP occurred */
-#define ACTIVITY		(1 << 8)	/* Bus busy */
-#define RX_DONE			(1 << 7)	/* Not used in Master mode */
-#define	TX_ABRT			(1 << 6)	/* Transmit Abort */
-#define RD_REQ			(1 << 5)	/* Not used in Master mode */
-#define TX_EMPTY		(1 << 4)	/* TX FIFO <= threshold */
-#define TX_OVER			(1 << 3)	/* TX FIFO overflow */
-#define	RX_FULL			(1 << 2)	/* RX FIFO >= threshold */
-#define	RX_OVER			(1 << 1)	/* RX FIFO overflow */
-#define RX_UNDER		(1 << 0)	/* RX FIFO empty */
-
-/* Receive FIFO Threshold Register */
-#define IC_RX_TL		0x38
-
-/* Transmit FIFO Treshold Register */
-#define IC_TX_TL		0x3c
-
-/* Clear Combined and Individual Interrupt Register */
-#define IC_CLR_INTR		0x40
-#define CLR_INTR		(1 << 0)
-
-/* Clear RX_UNDER Interrupt Register */
-#define IC_CLR_RX_UNDER		0x44
-#define CLR_RX_UNDER		(1 << 0)
-
-/* Clear RX_OVER Interrupt Register */
-#define IC_CLR_RX_OVER		0x48
-#define CLR_RX_OVER		(1 << 0)
-
-/* Clear TX_OVER Interrupt Register */
-#define IC_CLR_TX_OVER		0x4c
-#define CLR_TX_OVER		(1 << 0)
-
-#define IC_CLR_RD_REQ		0x50
-
-/* Clear TX_ABRT Interrupt Register */
-#define IC_CLR_TX_ABRT		0x54
-#define CLR_TX_ABRT		(1 << 0)
-#define IC_CLR_RX_DONE		0x58
-
-/* Clear ACTIVITY Interrupt Register */
-#define IC_CLR_ACTIVITY		0x5c
-#define CLR_ACTIVITY		(1 << 0)
-
-/* Clear STOP_DET Interrupt Register */
-#define IC_CLR_STOP_DET		0x60
-#define CLR_STOP_DET		(1 << 0)
-
-/* Clear START_DET Interrupt Register */
-#define IC_CLR_START_DET	0x64
-#define CLR_START_DET		(1 << 0)
-
-/* Clear GEN_CALL Interrupt Register */
-#define IC_CLR_GEN_CALL		0x68
-#define CLR_GEN_CALL		(1 << 0)
-
-/* Enable Register */
-#define IC_ENABLE		0x6c
-#define ENABLE			(1 << 0)
-
-/* Status Register */
-#define IC_STATUS		0x70		/* Read Only */
-#define STAT_SLV_ACTIVITY	(1 << 6)	/* Slave not in idle */
-#define STAT_MST_ACTIVITY	(1 << 5)	/* Master not in idle */
-#define STAT_RFF		(1 << 4)	/* RX FIFO Full */
-#define STAT_RFNE		(1 << 3)	/* RX FIFO Not Empty */
-#define STAT_TFE		(1 << 2)	/* TX FIFO Empty */
-#define STAT_TFNF		(1 << 1)	/* TX FIFO Not Full */
-#define STAT_ACTIVITY		(1 << 0)	/* Activity Status */
-
-/* Transmit FIFO Level Register */
-#define IC_TXFLR		0x74		/* Read Only */
-#define TXFLR			(1 << 0)	/* TX FIFO level */
-
-/* Receive FIFO Level Register */
-#define IC_RXFLR		0x78		/* Read Only */
-#define RXFLR			(1 << 0)	/* RX FIFO level */
-
-/* Transmit Abort Source Register */
-#define IC_TX_ABRT_SOURCE	0x80
-#define ABRT_SLVRD_INTX		(1 << 15)
-#define ABRT_SLV_ARBLOST	(1 << 14)
-#define ABRT_SLVFLUSH_TXFIFO	(1 << 13)
-#define	ARB_LOST		(1 << 12)
-#define ABRT_MASTER_DIS		(1 << 11)
-#define ABRT_10B_RD_NORSTRT	(1 << 10)
-#define ABRT_SBYTE_NORSTRT	(1 << 9)
-#define ABRT_HS_NORSTRT		(1 << 8)
-#define ABRT_SBYTE_ACKDET	(1 << 7)
-#define ABRT_HS_ACKDET		(1 << 6)
-#define ABRT_GCALL_READ		(1 << 5)
-#define ABRT_GCALL_NOACK	(1 << 4)
-#define ABRT_TXDATA_NOACK	(1 << 3)
-#define ABRT_10ADDR2_NOACK	(1 << 2)
-#define ABRT_10ADDR1_NOACK	(1 << 1)
-#define ABRT_7B_ADDR_NOACK	(1 << 0)
-
-/* Enable Status Register */
-#define IC_ENABLE_STATUS	0x9c
-#define IC_EN			(1 << 0)	/* I2C in an enabled state */
-
-/* Component Parameter Register 1*/
-#define IC_COMP_PARAM_1		0xf4
-#define APB_DATA_WIDTH		(0x3 << 0)
-
-/* added by xiaolin --begin */
-#define SS_MIN_SCL_HIGH         4000
-#define SS_MIN_SCL_LOW          4700
-#define FS_MIN_SCL_HIGH         600
-#define FS_MIN_SCL_LOW          1300
-#define HS_MIN_SCL_HIGH_100PF   60
-#define HS_MIN_SCL_LOW_100PF    120
-
-#define STANDARD		0
-#define FAST			1
-#define HIGH			2
-
-#define NUM_SPEEDS		3
-
-static int speed_mode[6] = {
-	FAST,
-	FAST,
-	FAST,
-	STANDARD,
-	FAST,
-	FAST
-};
-
-static int ctl_num = 6;
-module_param_array(speed_mode, int, &ctl_num, S_IRUGO);
-MODULE_PARM_DESC(speed_mode, "Set the speed of the i2c interface (0-2)");
-
-/**
- * intel_mid_i2c_disable - Disable I2C controller
- * @adap: struct pointer to i2c_adapter
- *
- * Return Value:
- * 0		success
- * -EBUSY	if device is busy
- * -ETIMEDOUT	if i2c cannot be disabled within the given time
- *
- * I2C bus state should be checked prior to disabling the hardware. If bus is
- * not in idle state, an errno is returned. Write "0" to IC_ENABLE to disable
- * I2C controller.
- */
-static int intel_mid_i2c_disable(struct i2c_adapter *adap)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int err = 0;
-	int count = 0;
-	int ret1, ret2;
-	static const u16 delay[NUM_SPEEDS] = {100, 25, 3};
-
-	/* Set IC_ENABLE to 0 */
-	writel(0, i2c->base + IC_ENABLE);
-
-	/* Check if device is busy */
-	dev_dbg(&adap->dev, "mrst i2c disable\n");
-	while ((ret1 = readl(i2c->base + IC_ENABLE_STATUS) & 0x1)
-		|| (ret2 = readl(i2c->base + IC_STATUS) & 0x1)) {
-		udelay(delay[i2c->speed]);
-		writel(0, i2c->base + IC_ENABLE);
-		dev_dbg(&adap->dev, "i2c is busy, count is %d speed %d\n",
-			count, i2c->speed);
-		if (count++ > 10) {
-			err = -ETIMEDOUT;
-			break;
-		}
-	}
-
-	/* Clear all interrupts */
-	readl(i2c->base + IC_CLR_INTR);
-	readl(i2c->base + IC_CLR_STOP_DET);
-	readl(i2c->base + IC_CLR_START_DET);
-	readl(i2c->base + IC_CLR_ACTIVITY);
-	readl(i2c->base + IC_CLR_TX_ABRT);
-	readl(i2c->base + IC_CLR_RX_OVER);
-	readl(i2c->base + IC_CLR_RX_UNDER);
-	readl(i2c->base + IC_CLR_TX_OVER);
-	readl(i2c->base + IC_CLR_RX_DONE);
-	readl(i2c->base + IC_CLR_GEN_CALL);
-
-	/* Disable all interupts */
-	writel(0x0000, i2c->base + IC_INTR_MASK);
-
-	return err;
-}
-
-/**
- * intel_mid_i2c_hwinit - Initialize the I2C hardware registers
- * @dev: pci device struct pointer
- *
- * This function will be called in intel_mid_i2c_probe() before device
- * registration.
- *
- * Return Values:
- * 0		success
- * -EBUSY	i2c cannot be disabled
- * -ETIMEDOUT	i2c cannot be disabled
- * -EFAULT	If APB data width is not 32-bit wide
- *
- * I2C should be disabled prior to other register operation. If failed, an
- * errno is returned. Mask and Clear all interrpts, this should be done at
- * first.  Set common registers which will not be modified during normal
- * transfers, including: control register, FIFO threshold and clock freq.
- * Check APB data width at last.
- */
-static int intel_mid_i2c_hwinit(struct intel_mid_i2c_private *i2c)
-{
-	int err;
-
-	static const u16 hcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
-		{ 0x75,  0x15, 0x07 },
-		{ 0x04c,  0x10, 0x06 }
-	};
-	static const u16 lcnt[NUM_PLATFORMS][NUM_SPEEDS] = {
-		{ 0x7C,  0x21, 0x0E },
-		{ 0x053, 0x19, 0x0F }
-	};
-
-	/* Disable i2c first */
-	err = intel_mid_i2c_disable(&i2c->adap);
-	if (err)
-		return err;
-
-	/*
-	 * Setup clock frequency and speed mode
-	 * Enable restart condition,
-	 * enable master FSM, disable slave FSM,
-	 * use target address when initiating transfer
-	 */
-
-	writel((i2c->speed + 1) << 1 | SLV_DIS | RESTART | MASTER_EN,
-		i2c->base + IC_CON);
-	writel(hcnt[i2c->platform][i2c->speed],
-		i2c->base + (IC_SS_SCL_HCNT + (i2c->speed << 3)));
-	writel(lcnt[i2c->platform][i2c->speed],
-		i2c->base + (IC_SS_SCL_LCNT + (i2c->speed << 3)));
-
-	/* Set tranmit & receive FIFO threshold to zero */
-	writel(0x0, i2c->base + IC_RX_TL);
-	writel(0x0, i2c->base + IC_TX_TL);
-
-	return 0;
-}
-
-/**
- * intel_mid_i2c_func - Return the supported three I2C operations.
- * @adapter: i2c_adapter struct pointer
- */
-static u32 intel_mid_i2c_func(struct i2c_adapter *adapter)
-{
-	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
-}
-
-/**
- * intel_mid_i2c_address_neq - To check if the addresses for different i2c messages
- * are equal.
- * @p1: first i2c_msg
- * @p2: second i2c_msg
- *
- * Return Values:
- * 0	 if addresses are equal
- * 1	 if not equal
- *
- * Within a single transfer, the I2C client may need to send its address more
- * than once. So a check if the addresses match is needed.
- */
-static inline bool intel_mid_i2c_address_neq(const struct i2c_msg *p1,
-				       const struct i2c_msg *p2)
-{
-	if (p1->addr != p2->addr)
-		return 1;
-	if ((p1->flags ^ p2->flags) & I2C_M_TEN)
-		return 1;
-	return 0;
-}
-
-/**
- * intel_mid_i2c_abort - To handle transfer abortions and print error messages.
- * @adap: i2c_adapter struct pointer
- *
- * By reading register IC_TX_ABRT_SOURCE, various transfer errors can be
- * distingushed. At present, no circumstances have been found out that
- * multiple errors would be occurred simutaneously, so we simply use the
- * register value directly.
- *
- * At last the error bits are cleared. (Note clear ABRT_SBYTE_NORSTRT bit need
- * a few extra steps)
- */
-static void intel_mid_i2c_abort(struct intel_mid_i2c_private *i2c)
-{
-	/* Read about source register */
-	int abort = i2c->abort;
-	struct i2c_adapter *adap = &i2c->adap;
-
-	/* Single transfer error check:
-	 * According to databook, TX/RX FIFOs would be flushed when
-	 * the abort interrupt occurred.
-	 */
-	if (abort & ABRT_MASTER_DIS)
-		dev_err(&adap->dev,
-		"initiate master operation with master mode disabled.\n");
-	if (abort & ABRT_10B_RD_NORSTRT)
-		dev_err(&adap->dev,
-	"RESTART disabled and master sent READ cmd in 10-bit addressing.\n");
-
-	if (abort & ABRT_SBYTE_NORSTRT) {
-		dev_err(&adap->dev,
-		"RESTART disabled and user is trying to send START byte.\n");
-		writel(~ABRT_SBYTE_NORSTRT, i2c->base + IC_TX_ABRT_SOURCE);
-		writel(RESTART, i2c->base + IC_CON);
-		writel(~IC_TAR_SPECIAL, i2c->base + IC_TAR);
-	}
-
-	if (abort & ABRT_SBYTE_ACKDET)
-		dev_err(&adap->dev,
-			"START byte was not acknowledged.\n");
-	if (abort & ABRT_TXDATA_NOACK)
-		dev_dbg(&adap->dev,
-			"No acknowledgement received from slave.\n");
-	if (abort & ABRT_10ADDR2_NOACK)
-		dev_dbg(&adap->dev,
-	"The 2nd address byte of the 10-bit address was not acknowledged.\n");
-	if (abort & ABRT_10ADDR1_NOACK)
-		dev_dbg(&adap->dev,
-	"The 1st address byte of 10-bit address was not acknowledged.\n");
-	if (abort & ABRT_7B_ADDR_NOACK)
-		dev_dbg(&adap->dev,
-			"I2C slave device not acknowledged.\n");
-
-	/* Clear TX_ABRT bit */
-	readl(i2c->base + IC_CLR_TX_ABRT);
-	i2c->status = STATUS_XFER_ABORT;
-}
-
-/**
- * xfer_read - Internal function to implement master read transfer.
- * @adap: i2c_adapter struct pointer
- * @buf: buffer in i2c_msg
- * @length: number of bytes to be read
- *
- * Return Values:
- * 0		if the read transfer succeeds
- * -ETIMEDOUT	if cannot read the "raw" interrupt register
- * -EINVAL	if a transfer abort occurred
- *
- * For every byte, a "READ" command will be loaded into IC_DATA_CMD prior to
- * data transfer. The actual "read" operation will be performed if an RX_FULL
- * interrupt occurred.
- *
- * Note there may be two interrupt signals captured, one should read
- * IC_RAW_INTR_STAT to separate between errors and actual data.
- */
-static int xfer_read(struct i2c_adapter *adap, unsigned char *buf, int length)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int i = length;
-	int err;
-
-	if (length >= 256) {
-		dev_err(&adap->dev,
-			"I2C FIFO cannot support larger than 256 bytes\n");
-		return -EMSGSIZE;
-	}
-
-	INIT_COMPLETION(i2c->complete);
-
-	readl(i2c->base + IC_CLR_INTR);
-	writel(0x0044, i2c->base + IC_INTR_MASK);
-
-	i2c->status = STATUS_READ_START;
-
-	while (i--)
-		writel(IC_RD, i2c->base + IC_DATA_CMD);
-
-	i2c->status = STATUS_READ_START;
-	err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
-	if (!err) {
-		dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
-		intel_mid_i2c_hwinit(i2c);
-		return -ETIMEDOUT;
-	}
-	if (i2c->status == STATUS_READ_SUCCESS)
-		return 0;
-	else
-		return -EIO;
-}
-
-/**
- * xfer_write - Internal function to implement master write transfer.
- * @adap: i2c_adapter struct pointer
- * @buf: buffer in i2c_msg
- * @length: number of bytes to be read
- *
- * Return Values:
- * 0	if the read transfer succeeds
- * -ETIMEDOUT	if we cannot read the "raw" interrupt register
- * -EINVAL	if a transfer abort occurred
- *
- * For every byte, a "WRITE" command will be loaded into IC_DATA_CMD prior to
- * data transfer. The actual "write" operation will be performed when the
- * RX_FULL interrupt signal occurs.
- *
- * Note there may be two interrupt signals captured, one should read
- * IC_RAW_INTR_STAT to separate between errors and actual data.
- */
-static int xfer_write(struct i2c_adapter *adap,
-		      unsigned char *buf, int length)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int i, err;
-
-	if (length >= 256) {
-		dev_err(&adap->dev,
-			"I2C FIFO cannot support larger than 256 bytes\n");
-		return -EMSGSIZE;
-	}
-
-	INIT_COMPLETION(i2c->complete);
-
-	readl(i2c->base + IC_CLR_INTR);
-	writel(0x0050, i2c->base + IC_INTR_MASK);
-
-	i2c->status = STATUS_WRITE_START;
-	for (i = 0; i < length; i++)
-		writel((u16)(*(buf + i)), i2c->base + IC_DATA_CMD);
-
-	i2c->status = STATUS_WRITE_START;
-	err = wait_for_completion_interruptible_timeout(&i2c->complete, HZ);
-	if (!err) {
-		dev_err(&adap->dev, "Timeout for ACK from I2C slave device\n");
-		intel_mid_i2c_hwinit(i2c);
-		return -ETIMEDOUT;
-	} else {
-		if (i2c->status == STATUS_WRITE_SUCCESS)
-			return 0;
-		else
-			return -EIO;
-	}
-}
-
-static int intel_mid_i2c_setup(struct i2c_adapter *adap,  struct i2c_msg *pmsg)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int err;
-	u32 reg;
-	u32 bit_mask;
-	u32 mode;
-
-	/* Disable device first */
-	err = intel_mid_i2c_disable(adap);
-	if (err) {
-		dev_err(&adap->dev,
-			"Cannot disable i2c controller, timeout\n");
-		return err;
-	}
-
-	mode = (1 + i2c->speed) << 1;
-	/* set the speed mode */
-	reg = readl(i2c->base + IC_CON);
-	if ((reg & 0x06) != mode) {
-		dev_dbg(&adap->dev, "set mode %d\n", i2c->speed);
-		writel((reg & ~0x6) | mode, i2c->base + IC_CON);
-	}
-
-	reg = readl(i2c->base + IC_CON);
-	/* use 7-bit addressing */
-	if (pmsg->flags & I2C_M_TEN) {
-		if ((reg & ADDR_10BIT) != ADDR_10BIT) {
-			dev_dbg(&adap->dev, "set i2c 10 bit address mode\n");
-			writel(reg | ADDR_10BIT, i2c->base + IC_CON);
-		}
-	} else {
-		if ((reg & ADDR_10BIT) != 0x0) {
-			dev_dbg(&adap->dev, "set i2c 7 bit address mode\n");
-			writel(reg & ~ADDR_10BIT, i2c->base + IC_CON);
-		}
-	}
-	/* enable restart conditions */
-	reg = readl(i2c->base + IC_CON);
-	if ((reg & RESTART) != RESTART) {
-		dev_dbg(&adap->dev, "enable restart conditions\n");
-		writel(reg | RESTART, i2c->base + IC_CON);
-	}
-
-	/* enable master FSM */
-	reg = readl(i2c->base + IC_CON);
-	dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
-	writel(reg | MASTER_EN, i2c->base + IC_CON);
-	if ((reg & SLV_DIS) != SLV_DIS) {
-		dev_dbg(&adap->dev, "enable master FSM\n");
-		writel(reg | SLV_DIS, i2c->base + IC_CON);
-		dev_dbg(&adap->dev, "ic_con reg is 0x%x\n", reg);
-	}
-
-	/* use target address when initiating transfer */
-	reg = readl(i2c->base + IC_TAR);
-	bit_mask = IC_TAR_SPECIAL | IC_TAR_GC_OR_START;
-
-	if ((reg & bit_mask) != 0x0) {
-		dev_dbg(&adap->dev,
-	 "WR: use target address when intiating transfer, i2c_tx_target\n");
-		writel(reg & ~bit_mask, i2c->base + IC_TAR);
-	}
-
-	/* set target address to the I2C slave address */
-	dev_dbg(&adap->dev,
-		"set target address to the I2C slave address, addr is %x\n",
-			pmsg->addr);
-	writel(pmsg->addr | (pmsg->flags & I2C_M_TEN ? IC_TAR_10BIT_ADDR : 0),
-		i2c->base + IC_TAR);
-
-	/* Enable I2C controller */
-	writel(ENABLE, i2c->base + IC_ENABLE);
-
-	return 0;
-}
-
-/**
- * intel_mid_i2c_xfer - Main master transfer routine.
- * @adap: i2c_adapter struct pointer
- * @pmsg: i2c_msg struct pointer
- * @num: number of i2c_msg
- *
- * Return Values:
- * +		number of messages transferred
- * -ETIMEDOUT	If cannot disable I2C controller or read IC_STATUS
- * -EINVAL	If the address in i2c_msg is invalid
- *
- * This function will be registered in i2c-core and exposed to external
- * I2C clients.
- * 1. Disable I2C controller
- * 2. Unmask three interrupts: RX_FULL, TX_EMPTY, TX_ABRT
- * 3. Check if address in i2c_msg is valid
- * 4. Enable I2C controller
- * 5. Perform real transfer (call xfer_read or xfer_write)
- * 6. Wait until the current transfer is finished (check bus state)
- * 7. Mask and clear all interrupts
- */
-static int intel_mid_i2c_xfer(struct i2c_adapter *adap,
-			 struct i2c_msg *pmsg,
-			 int num)
-{
-	struct intel_mid_i2c_private *i2c = i2c_get_adapdata(adap);
-	int i, err = 0;
-
-	/* if number of messages equal 0*/
-	if (num == 0)
-		return 0;
-
-	pm_runtime_get(i2c->dev);
-
-	mutex_lock(&i2c->lock);
-	dev_dbg(&adap->dev, "intel_mid_i2c_xfer, process %d msg(s)\n", num);
-	dev_dbg(&adap->dev, "slave address is %x\n", pmsg->addr);
-
-
-	if (i2c->status != STATUS_IDLE) {
-		dev_err(&adap->dev, "Adapter %d in transfer/standby\n",
-								adap->nr);
-		mutex_unlock(&i2c->lock);
-		pm_runtime_put(i2c->dev);
-		return -1;
-	}
-
-
-	for (i = 1; i < num; i++) {
-		/* Message address equal? */
-		if (unlikely(intel_mid_i2c_address_neq(&pmsg[0], &pmsg[i]))) {
-			dev_err(&adap->dev, "Invalid address in msg[%d]\n", i);
-			mutex_unlock(&i2c->lock);
-			pm_runtime_put(i2c->dev);
-			return -EINVAL;
-		}
-	}
-
-	if (intel_mid_i2c_setup(adap, pmsg)) {
-		mutex_unlock(&i2c->lock);
-		pm_runtime_put(i2c->dev);
-		return -EINVAL;
-	}
-
-	for (i = 0; i < num; i++) {
-		i2c->msg = pmsg;
-		i2c->status = STATUS_IDLE;
-		/* Read or Write */
-		if (pmsg->flags & I2C_M_RD) {
-			dev_dbg(&adap->dev, "I2C_M_RD\n");
-			err = xfer_read(adap, pmsg->buf, pmsg->len);
-		} else {
-			dev_dbg(&adap->dev, "I2C_M_WR\n");
-			err = xfer_write(adap, pmsg->buf, pmsg->len);
-		}
-		if (err < 0)
-			break;
-		dev_dbg(&adap->dev, "msg[%d] transfer complete\n", i);
-		pmsg++;		/* next message */
-	}
-
-	/* Mask interrupts */
-	writel(0x0000, i2c->base + IC_INTR_MASK);
-	/* Clear all interrupts */
-	readl(i2c->base + IC_CLR_INTR);
-
-	i2c->status = STATUS_IDLE;
-	mutex_unlock(&i2c->lock);
-	pm_runtime_put(i2c->dev);
-
-	return err;
-}
-
-static int intel_mid_i2c_runtime_suspend(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
-	struct i2c_adapter *adap = to_i2c_adapter(dev);
-	int err;
-
-	if (i2c->status != STATUS_IDLE)
-		return -1;
-
-	intel_mid_i2c_disable(adap);
-
-	err = pci_save_state(pdev);
-	if (err) {
-		dev_err(dev, "pci_save_state failed\n");
-		return err;
-	}
-
-	err = pci_set_power_state(pdev, PCI_D3hot);
-	if (err) {
-		dev_err(dev, "pci_set_power_state failed\n");
-		return err;
-	}
-	i2c->status = STATUS_STANDBY;
-
-	return 0;
-}
-
-static int intel_mid_i2c_runtime_resume(struct device *dev)
-{
-	struct pci_dev *pdev = to_pci_dev(dev);
-	struct intel_mid_i2c_private *i2c = pci_get_drvdata(pdev);
-	int err;
-
-	if (i2c->status != STATUS_STANDBY)
-		return 0;
-
-	pci_set_power_state(pdev, PCI_D0);
-	pci_restore_state(pdev);
-	err = pci_enable_device(pdev);
-	if (err) {
-		dev_err(dev, "pci_enable_device failed\n");
-		return err;
-	}
-
-	i2c->status = STATUS_IDLE;
-
-	intel_mid_i2c_hwinit(i2c);
-	return err;
-}
-
-static void i2c_isr_read(struct intel_mid_i2c_private *i2c)
-{
-	struct i2c_msg *msg = i2c->msg;
-	int rx_num;
-	u32 len;
-	u8 *buf;
-
-	if (!(msg->flags & I2C_M_RD))
-		return;
-
-	if (i2c->status != STATUS_READ_IN_PROGRESS) {
-		len = msg->len;
-		buf = msg->buf;
-	} else {
-		len = i2c->rx_buf_len;
-		buf = i2c->rx_buf;
-	}
-
-	rx_num = readl(i2c->base + IC_RXFLR);
-
-	for (; len > 0 && rx_num > 0; len--, rx_num--)
-		*buf++ = readl(i2c->base + IC_DATA_CMD);
-
-	if (len > 0) {
-		i2c->status = STATUS_READ_IN_PROGRESS;
-		i2c->rx_buf_len = len;
-		i2c->rx_buf = buf;
-	} else
-		i2c->status = STATUS_READ_SUCCESS;
-
-	return;
-}
-
-static irqreturn_t intel_mid_i2c_isr(int this_irq, void *dev)
-{
-	struct intel_mid_i2c_private *i2c = dev;
-	u32 stat = readl(i2c->base + IC_INTR_STAT);
-
-	if (!stat)
-		return IRQ_NONE;
-
-	dev_dbg(&i2c->adap.dev, "%s, stat = 0x%x\n", __func__, stat);
-	stat &= 0x54;
-
-	if (i2c->status != STATUS_WRITE_START &&
-	    i2c->status != STATUS_READ_START &&
-	    i2c->status != STATUS_READ_IN_PROGRESS)
-		goto err;
-
-	if (stat & TX_ABRT)
-		i2c->abort = readl(i2c->base + IC_TX_ABRT_SOURCE);
-
-	readl(i2c->base + IC_CLR_INTR);
-
-	if (stat & TX_ABRT) {
-		intel_mid_i2c_abort(i2c);
-		goto exit;
-	}
-
-	if (stat & RX_FULL) {
-		i2c_isr_read(i2c);
-		goto exit;
-	}
-
-	if (stat & TX_EMPTY) {
-		if (readl(i2c->base + IC_STATUS) & 0x4)
-			i2c->status = STATUS_WRITE_SUCCESS;
-	}
-
-exit:
-	if (i2c->status == STATUS_READ_SUCCESS ||
-	    i2c->status == STATUS_WRITE_SUCCESS ||
-	    i2c->status == STATUS_XFER_ABORT) {
-		/* Clear all interrupts */
-		readl(i2c->base + IC_CLR_INTR);
-		/* Mask interrupts */
-		writel(0, i2c->base + IC_INTR_MASK);
-		complete(&i2c->complete);
-	}
-err:
-	return IRQ_HANDLED;
-}
-
-static struct i2c_algorithm intel_mid_i2c_algorithm = {
-	.master_xfer	= intel_mid_i2c_xfer,
-	.functionality	= intel_mid_i2c_func,
-};
-
-
-static const struct dev_pm_ops intel_mid_i2c_pm_ops = {
-	.runtime_suspend = intel_mid_i2c_runtime_suspend,
-	.runtime_resume = intel_mid_i2c_runtime_resume,
-};
-
-/**
- * intel_mid_i2c_probe - I2C controller initialization routine
- * @dev: pci device
- * @id: device id
- *
- * Return Values:
- * 0		success
- * -ENODEV	If cannot allocate pci resource
- * -ENOMEM	If the register base remapping failed, or
- *		if kzalloc failed
- *
- * Initialization steps:
- * 1. Request for PCI resource
- * 2. Remap the start address of PCI resource to register base
- * 3. Request for device memory region
- * 4. Fill in the struct members of intel_mid_i2c_private
- * 5. Call intel_mid_i2c_hwinit() for hardware initialization
- * 6. Register I2C adapter in i2c-core
- */
-static int intel_mid_i2c_probe(struct pci_dev *dev,
-				    const struct pci_device_id *id)
-{
-	struct intel_mid_i2c_private *mrst;
-	unsigned long start, len;
-	int err, busnum;
-	void __iomem *base = NULL;
-
-	dev_dbg(&dev->dev, "Get into probe function for I2C\n");
-	err = pci_enable_device(dev);
-	if (err) {
-		dev_err(&dev->dev, "Failed to enable I2C PCI device (%d)\n",
-			err);
-		goto exit;
-	}
-
-	/* Determine the address of the I2C area */
-	start = pci_resource_start(dev, 0);
-	len = pci_resource_len(dev, 0);
-	if (!start || len == 0) {
-		dev_err(&dev->dev, "base address not set\n");
-		err = -ENODEV;
-		goto exit;
-	}
-	dev_dbg(&dev->dev, "%s i2c resource start 0x%lx, len=%ld\n",
-		PLATFORM, start, len);
-
-	err = pci_request_region(dev, 0, DRIVER_NAME);
-	if (err) {
-		dev_err(&dev->dev, "failed to request I2C region "
-			"0x%lx-0x%lx\n", start,
-			(unsigned long)pci_resource_end(dev, 0));
-		goto exit;
-	}
-
-	base = ioremap_nocache(start, len);
-	if (!base) {
-		dev_err(&dev->dev, "I/O memory remapping failed\n");
-		err = -ENOMEM;
-		goto fail0;
-	}
-
-	/* Allocate the per-device data structure, intel_mid_i2c_private */
-	mrst = kzalloc(sizeof(struct intel_mid_i2c_private), GFP_KERNEL);
-	if (mrst == NULL) {
-		dev_err(&dev->dev, "can't allocate interface\n");
-		err = -ENOMEM;
-		goto fail1;
-	}
-
-	/* Initialize struct members */
-	snprintf(mrst->adap.name, sizeof(mrst->adap.name),
-		"Intel MID I2C at %lx", start);
-	mrst->adap.owner = THIS_MODULE;
-	mrst->adap.algo = &intel_mid_i2c_algorithm;
-	mrst->adap.dev.parent = &dev->dev;
-	mrst->dev = &dev->dev;
-	mrst->base = base;
-	mrst->speed = STANDARD;
-	mrst->abort = 0;
-	mrst->rx_buf_len = 0;
-	mrst->status = STATUS_IDLE;
-
-	pci_set_drvdata(dev, mrst);
-	i2c_set_adapdata(&mrst->adap, mrst);
-
-	mrst->adap.nr = busnum = id->driver_data;
-	if (dev->device <= 0x0804)
-		mrst->platform = MOORESTOWN;
-	else
-		mrst->platform = MEDFIELD;
-
-	dev_dbg(&dev->dev, "I2C%d\n", busnum);
-
-	if (ctl_num > busnum) {
-		if (speed_mode[busnum] < 0 || speed_mode[busnum] >= NUM_SPEEDS)
-			dev_warn(&dev->dev, "invalid speed %d ignored.\n",
-							speed_mode[busnum]);
-		else
-			mrst->speed = speed_mode[busnum];
-	}
-
-	/* Initialize i2c controller */
-	err = intel_mid_i2c_hwinit(mrst);
-	if (err < 0) {
-		dev_err(&dev->dev, "I2C interface initialization failed\n");
-		goto fail2;
-	}
-
-	mutex_init(&mrst->lock);
-	init_completion(&mrst->complete);
-
-	/* Clear all interrupts */
-	readl(mrst->base + IC_CLR_INTR);
-	writel(0x0000, mrst->base + IC_INTR_MASK);
-
-	err = request_irq(dev->irq, intel_mid_i2c_isr, IRQF_SHARED,
-					mrst->adap.name, mrst);
-	if (err) {
-		dev_err(&dev->dev, "Failed to request IRQ for I2C controller: "
-			"%s", mrst->adap.name);
-		goto fail2;
-	}
-
-	/* Adapter registration */
-	err = i2c_add_numbered_adapter(&mrst->adap);
-	if (err) {
-		dev_err(&dev->dev, "Adapter %s registration failed\n",
-			mrst->adap.name);
-		goto fail3;
-	}
-
-	dev_dbg(&dev->dev, "%s I2C bus %d driver bind success.\n",
-		(mrst->platform == MOORESTOWN) ? "Moorestown" : "Medfield",
-		busnum);
-
-	pm_runtime_enable(&dev->dev);
-	return 0;
-
-fail3:
-	free_irq(dev->irq, mrst);
-fail2:
-	kfree(mrst);
-fail1:
-	iounmap(base);
-fail0:
-	pci_release_region(dev, 0);
-exit:
-	return err;
-}
-
-static void intel_mid_i2c_remove(struct pci_dev *dev)
-{
-	struct intel_mid_i2c_private *mrst = pci_get_drvdata(dev);
-	intel_mid_i2c_disable(&mrst->adap);
-	i2c_del_adapter(&mrst->adap);
-
-	free_irq(dev->irq, mrst);
-	iounmap(mrst->base);
-	kfree(mrst);
-	pci_release_region(dev, 0);
-}
-
-static DEFINE_PCI_DEVICE_TABLE(intel_mid_i2c_ids) = {
-	/* Moorestown */
-	{ PCI_VDEVICE(INTEL, 0x0802), 0 },
-	{ PCI_VDEVICE(INTEL, 0x0803), 1 },
-	{ PCI_VDEVICE(INTEL, 0x0804), 2 },
-	/* Medfield */
-	{ PCI_VDEVICE(INTEL, 0x0817), 3,},
-	{ PCI_VDEVICE(INTEL, 0x0818), 4 },
-	{ PCI_VDEVICE(INTEL, 0x0819), 5 },
-	{ PCI_VDEVICE(INTEL, 0x082C), 0 },
-	{ PCI_VDEVICE(INTEL, 0x082D), 1 },
-	{ PCI_VDEVICE(INTEL, 0x082E), 2 },
-	{ 0,}
-};
-MODULE_DEVICE_TABLE(pci, intel_mid_i2c_ids);
-
-static struct pci_driver intel_mid_i2c_driver = {
-	.name		= DRIVER_NAME,
-	.id_table	= intel_mid_i2c_ids,
-	.probe		= intel_mid_i2c_probe,
-	.remove		= intel_mid_i2c_remove,
-};
-
-module_pci_driver(intel_mid_i2c_driver);
-
-MODULE_AUTHOR("Ba Zheng <zheng.ba@intel.com>");
-MODULE_DESCRIPTION("I2C driver for Moorestown Platform");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(VERSION);
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index bc99333..dd24aa0 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -176,7 +176,7 @@ iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap,
 		interrupted = wait_event_interruptible_timeout (
 			iop3xx_adap->waitq,
 			(done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )),
-			1 * HZ;
+			1 * HZ
 			);
 		if ((rc = iop3xx_i2c_error(sr)) < 0) {
 			*status = sr;
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index cd82eb4..0043ede 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -393,6 +393,9 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 
 	desc = &priv->hw[priv->head];
 
+	/* Initialize the DMA buffer */
+	memset(priv->dma_buffer, 0, sizeof(priv->dma_buffer));
+
 	/* Initialize the descriptor */
 	memset(desc, 0, sizeof(struct ismt_desc));
 	desc->tgtaddr_rw = ISMT_DESC_ADDR_RW(addr, read_write);
@@ -538,7 +541,7 @@ static int ismt_access(struct i2c_adapter *adap, u16 addr,
 		desc->dptr_high = upper_32_bits(dma_addr);
 	}
 
-	INIT_COMPLETION(priv->cmp);
+	reinit_completion(&priv->cmp);
 
 	/* Add the descriptor */
 	ismt_submit_desc(priv);
@@ -879,6 +882,7 @@ ismt_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 						 DMA_BIT_MASK(32)) != 0)) {
 			dev_err(&pdev->dev, "pci_set_dma_mask fail %p\n",
 				pdev);
+			err = -ENODEV;
 			goto fail;
 		}
 	}
diff --git a/drivers/i2c/busses/i2c-kempld.c b/drivers/i2c/busses/i2c-kempld.c
new file mode 100644
index 0000000..af8f65f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-kempld.c
@@ -0,0 +1,410 @@
+/*
+ * I2C bus driver for Kontron COM modules
+ *
+ * Copyright (c) 2010-2013 Kontron Europe GmbH
+ * Author: Michael Brunner <michael.brunner@kontron.com>
+ *
+ * The driver is based on the i2c-ocores driver by Peter Korsgaard.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/mfd/kempld.h>
+
+#define KEMPLD_I2C_PRELOW	0x0b
+#define KEMPLD_I2C_PREHIGH	0x0c
+#define KEMPLD_I2C_DATA		0x0e
+
+#define KEMPLD_I2C_CTRL		0x0d
+#define I2C_CTRL_IEN		0x40
+#define I2C_CTRL_EN		0x80
+
+#define KEMPLD_I2C_STAT		0x0f
+#define I2C_STAT_IF		0x01
+#define I2C_STAT_TIP		0x02
+#define I2C_STAT_ARBLOST	0x20
+#define I2C_STAT_BUSY		0x40
+#define I2C_STAT_NACK		0x80
+
+#define KEMPLD_I2C_CMD		0x0f
+#define I2C_CMD_START		0x91
+#define I2C_CMD_STOP		0x41
+#define I2C_CMD_READ		0x21
+#define I2C_CMD_WRITE		0x11
+#define I2C_CMD_READ_ACK	0x21
+#define I2C_CMD_READ_NACK	0x29
+#define I2C_CMD_IACK		0x01
+
+#define KEMPLD_I2C_FREQ_MAX	2700	/* 2.7 mHz */
+#define KEMPLD_I2C_FREQ_STD	100	/* 100 kHz */
+
+enum {
+	STATE_DONE = 0,
+	STATE_INIT,
+	STATE_ADDR,
+	STATE_ADDR10,
+	STATE_START,
+	STATE_WRITE,
+	STATE_READ,
+	STATE_ERROR,
+};
+
+struct kempld_i2c_data {
+	struct device			*dev;
+	struct kempld_device_data	*pld;
+	struct i2c_adapter		adap;
+	struct i2c_msg			*msg;
+	int				pos;
+	int				nmsgs;
+	int				state;
+	bool				was_active;
+};
+
+static unsigned int bus_frequency = KEMPLD_I2C_FREQ_STD;
+module_param(bus_frequency, uint, 0);
+MODULE_PARM_DESC(bus_frequency, "Set I2C bus frequency in kHz (default="
+				__MODULE_STRING(KEMPLD_I2C_FREQ_STD)")");
+
+static int i2c_bus = -1;
+module_param(i2c_bus, int, 0);
+MODULE_PARM_DESC(i2c_bus, "Set I2C bus number (default=-1 for dynamic assignment)");
+
+static bool i2c_gpio_mux;
+module_param(i2c_gpio_mux, bool, 0);
+MODULE_PARM_DESC(i2c_gpio_mux, "Enable I2C port on GPIO out (default=false)");
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static int kempld_i2c_process(struct kempld_i2c_data *i2c)
+{
+	struct kempld_device_data *pld = i2c->pld;
+	u8 stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+	struct i2c_msg *msg = i2c->msg;
+	u8 addr;
+
+	/* Ready? */
+	if (stat & I2C_STAT_TIP)
+		return -EBUSY;
+
+	if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR) {
+		/* Stop has been sent */
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+		if (i2c->state == STATE_ERROR)
+			return -EIO;
+		return 0;
+	}
+
+	/* Error? */
+	if (stat & I2C_STAT_ARBLOST) {
+		i2c->state = STATE_ERROR;
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+		return -EAGAIN;
+	}
+
+	if (i2c->state == STATE_INIT) {
+		if (stat & I2C_STAT_BUSY)
+			return -EBUSY;
+
+		i2c->state = STATE_ADDR;
+	}
+
+	if (i2c->state == STATE_ADDR) {
+		/* 10 bit address? */
+		if (i2c->msg->flags & I2C_M_TEN) {
+			addr = 0xf0 | ((i2c->msg->addr >> 7) & 0x6);
+			i2c->state = STATE_ADDR10;
+		} else {
+			addr = (i2c->msg->addr << 1);
+			i2c->state = STATE_START;
+		}
+
+		/* Set read bit if necessary */
+		addr |= (i2c->msg->flags & I2C_M_RD) ? 1 : 0;
+
+		kempld_write8(pld, KEMPLD_I2C_DATA, addr);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_START);
+
+		return 0;
+	}
+
+	/* Second part of 10 bit addressing */
+	if (i2c->state == STATE_ADDR10) {
+		kempld_write8(pld, KEMPLD_I2C_DATA, i2c->msg->addr & 0xff);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+
+		i2c->state = STATE_START;
+		return 0;
+	}
+
+	if (i2c->state == STATE_START || i2c->state == STATE_WRITE) {
+		i2c->state = (msg->flags & I2C_M_RD) ? STATE_READ : STATE_WRITE;
+
+		if (stat & I2C_STAT_NACK) {
+			i2c->state = STATE_ERROR;
+			kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+			return -ENXIO;
+		}
+	} else {
+		msg->buf[i2c->pos++] = kempld_read8(pld, KEMPLD_I2C_DATA);
+	}
+
+	if (i2c->pos >= msg->len) {
+		i2c->nmsgs--;
+		i2c->msg++;
+		i2c->pos = 0;
+		msg = i2c->msg;
+
+		if (i2c->nmsgs) {
+			if (!(msg->flags & I2C_M_NOSTART)) {
+				i2c->state = STATE_ADDR;
+				return 0;
+			} else {
+				i2c->state = (msg->flags & I2C_M_RD)
+					? STATE_READ : STATE_WRITE;
+			}
+		} else {
+			i2c->state = STATE_DONE;
+			kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+			return 0;
+		}
+	}
+
+	if (i2c->state == STATE_READ) {
+		kempld_write8(pld, KEMPLD_I2C_CMD, i2c->pos == (msg->len - 1) ?
+			      I2C_CMD_READ_NACK : I2C_CMD_READ_ACK);
+	} else {
+		kempld_write8(pld, KEMPLD_I2C_DATA, msg->buf[i2c->pos++]);
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_WRITE);
+	}
+
+	return 0;
+}
+
+static int kempld_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
+				int num)
+{
+	struct kempld_i2c_data *i2c = i2c_get_adapdata(adap);
+	struct kempld_device_data *pld = i2c->pld;
+	unsigned long timeout = jiffies + HZ;
+	int ret;
+
+	i2c->msg = msgs;
+	i2c->pos = 0;
+	i2c->nmsgs = num;
+	i2c->state = STATE_INIT;
+
+	/* Handle the transfer */
+	while (time_before(jiffies, timeout)) {
+		kempld_get_mutex(pld);
+		ret = kempld_i2c_process(i2c);
+		kempld_release_mutex(pld);
+
+		if (i2c->state == STATE_DONE || i2c->state == STATE_ERROR)
+			return (i2c->state == STATE_DONE) ? num : ret;
+
+		if (ret == 0)
+			timeout = jiffies + HZ;
+
+		usleep_range(5, 15);
+	}
+
+	i2c->state = STATE_ERROR;
+
+	return -ETIMEDOUT;
+}
+
+/*
+ * kempld_get_mutex must be called prior to calling this function.
+ */
+static void kempld_i2c_device_init(struct kempld_i2c_data *i2c)
+{
+	struct kempld_device_data *pld = i2c->pld;
+	u16 prescale_corr;
+	long prescale;
+	u8 ctrl;
+	u8 stat;
+	u8 cfg;
+
+	/* Make sure the device is disabled */
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+	ctrl &= ~(I2C_CTRL_EN | I2C_CTRL_IEN);
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+	if (bus_frequency > KEMPLD_I2C_FREQ_MAX)
+		bus_frequency = KEMPLD_I2C_FREQ_MAX;
+
+	if (pld->info.spec_major == 1)
+		prescale = pld->pld_clock / (bus_frequency * 5) - 1000;
+	else
+		prescale = pld->pld_clock / (bus_frequency * 4) - 3000;
+
+	if (prescale < 0)
+		prescale = 0;
+
+	/* Round to the best matching value */
+	prescale_corr = prescale / 1000;
+	if (prescale % 1000 >= 500)
+		prescale_corr++;
+
+	kempld_write8(pld, KEMPLD_I2C_PRELOW, prescale_corr & 0xff);
+	kempld_write8(pld, KEMPLD_I2C_PREHIGH, prescale_corr >> 8);
+
+	/* Activate I2C bus output on GPIO pins */
+	cfg = kempld_read8(pld, KEMPLD_CFG);
+	if (i2c_gpio_mux)
+		cfg |= KEMPLD_CFG_GPIO_I2C_MUX;
+	else
+		cfg &= ~KEMPLD_CFG_GPIO_I2C_MUX;
+	kempld_write8(pld, KEMPLD_CFG, cfg);
+
+	/* Enable the device */
+	kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_IACK);
+	ctrl |= I2C_CTRL_EN;
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+
+	stat = kempld_read8(pld, KEMPLD_I2C_STAT);
+	if (stat & I2C_STAT_BUSY)
+		kempld_write8(pld, KEMPLD_I2C_CMD, I2C_CMD_STOP);
+}
+
+static u32 kempld_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm kempld_i2c_algorithm = {
+	.master_xfer	= kempld_i2c_xfer,
+	.functionality	= kempld_i2c_func,
+};
+
+static struct i2c_adapter kempld_i2c_adapter = {
+	.owner		= THIS_MODULE,
+	.name		= "i2c-kempld",
+	.class		= I2C_CLASS_HWMON | I2C_CLASS_SPD,
+	.algo		= &kempld_i2c_algorithm,
+};
+
+static int kempld_i2c_probe(struct platform_device *pdev)
+{
+	struct kempld_device_data *pld = dev_get_drvdata(pdev->dev.parent);
+	struct kempld_i2c_data *i2c;
+	int ret;
+	u8 ctrl;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	i2c->pld = pld;
+	i2c->dev = &pdev->dev;
+	i2c->adap = kempld_i2c_adapter;
+	i2c->adap.dev.parent = i2c->dev;
+	i2c_set_adapdata(&i2c->adap, i2c);
+	platform_set_drvdata(pdev, i2c);
+
+	kempld_get_mutex(pld);
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+
+	if (ctrl & I2C_CTRL_EN)
+		i2c->was_active = true;
+
+	kempld_i2c_device_init(i2c);
+	kempld_release_mutex(pld);
+
+	/* Add I2C adapter to I2C tree */
+	if (i2c_bus >= -1)
+		i2c->adap.nr = i2c_bus;
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret)
+		return ret;
+
+	dev_info(i2c->dev, "I2C bus initialized at %dkHz\n",
+		 bus_frequency);
+
+	return 0;
+}
+
+static int kempld_i2c_remove(struct platform_device *pdev)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+	u8 ctrl;
+
+	kempld_get_mutex(pld);
+	/*
+	 * Disable I2C logic if it was not activated before the
+	 * driver loaded
+	 */
+	if (!i2c->was_active) {
+		ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+		ctrl &= ~I2C_CTRL_EN;
+		kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+	}
+	kempld_release_mutex(pld);
+
+	i2c_del_adapter(&i2c->adap);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int kempld_i2c_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+	u8 ctrl;
+
+	kempld_get_mutex(pld);
+	ctrl = kempld_read8(pld, KEMPLD_I2C_CTRL);
+	ctrl &= ~I2C_CTRL_EN;
+	kempld_write8(pld, KEMPLD_I2C_CTRL, ctrl);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+
+static int kempld_i2c_resume(struct platform_device *pdev)
+{
+	struct kempld_i2c_data *i2c = platform_get_drvdata(pdev);
+	struct kempld_device_data *pld = i2c->pld;
+
+	kempld_get_mutex(pld);
+	kempld_i2c_device_init(i2c);
+	kempld_release_mutex(pld);
+
+	return 0;
+}
+#else
+#define kempld_i2c_suspend	NULL
+#define kempld_i2c_resume	NULL
+#endif
+
+static struct platform_driver kempld_i2c_driver = {
+	.driver = {
+		.name = "kempld-i2c",
+		.owner = THIS_MODULE,
+	},
+	.probe		= kempld_i2c_probe,
+	.remove		= kempld_i2c_remove,
+	.suspend	= kempld_i2c_suspend,
+	.resume		= kempld_i2c_resume,
+};
+
+module_platform_driver(kempld_i2c_driver);
+
+MODULE_DESCRIPTION("KEM PLD I2C Driver");
+MODULE_AUTHOR("Michael Brunner <michael.brunner@kontron.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:kempld_i2c");
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 9c55aae..8a2e2cd 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -17,10 +17,12 @@
 #include <linux/module.h>
 #include <linux/sched.h>
 #include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
 #include <linux/of_platform.h>
-#include <linux/of_i2c.h>
 #include <linux/slab.h>
 
+#include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/fsl_devices.h>
 #include <linux/i2c.h>
@@ -64,9 +66,10 @@ struct mpc_i2c {
 	struct i2c_adapter adap;
 	int irq;
 	u32 real_clk;
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 	u8 fdr, dfsrr;
 #endif
+	struct clk *clk_per;
 };
 
 struct mpc_i2c_divider {
@@ -618,7 +621,6 @@ static const struct i2c_algorithm mpc_algo = {
 
 static struct i2c_adapter mpc_ops = {
 	.owner = THIS_MODULE,
-	.name = "MPC adapter",
 	.algo = &mpc_algo,
 	.timeout = HZ,
 };
@@ -632,6 +634,9 @@ static int fsl_i2c_probe(struct platform_device *op)
 	u32 clock = MPC_I2C_CLOCK_LEGACY;
 	int result = 0;
 	int plen;
+	struct resource res;
+	struct clk *clk;
+	int err;
 
 	match = of_match_device(mpc_i2c_of_match, &op->dev);
 	if (!match)
@@ -662,6 +667,21 @@ static int fsl_i2c_probe(struct platform_device *op)
 		}
 	}
 
+	/*
+	 * enable clock for the I2C peripheral (non fatal),
+	 * keep a reference upon successful allocation
+	 */
+	clk = devm_clk_get(&op->dev, NULL);
+	if (!IS_ERR(clk)) {
+		err = clk_prepare_enable(clk);
+		if (err) {
+			dev_err(&op->dev, "failed to enable clock\n");
+			goto fail_request;
+		} else {
+			i2c->clk_per = clk;
+		}
+	}
+
 	if (of_get_property(op->dev.of_node, "fsl,preserve-clocking", NULL)) {
 		clock = MPC_I2C_CLOCK_PRESERVE;
 	} else {
@@ -688,9 +708,12 @@ static int fsl_i2c_probe(struct platform_device *op)
 	}
 	dev_info(i2c->dev, "timeout %u us\n", mpc_ops.timeout * 1000000 / HZ);
 
-	dev_set_drvdata(&op->dev, i2c);
+	platform_set_drvdata(op, i2c);
 
 	i2c->adap = mpc_ops;
+	of_address_to_resource(op->dev.of_node, 0, &res);
+	scnprintf(i2c->adap.name, sizeof(i2c->adap.name),
+		  "MPC adapter at 0x%llx", (unsigned long long)res.start);
 	i2c_set_adapdata(&i2c->adap, i2c);
 	i2c->adap.dev.parent = &op->dev;
 	i2c->adap.dev.of_node = of_node_get(op->dev.of_node);
@@ -700,11 +723,12 @@ static int fsl_i2c_probe(struct platform_device *op)
 		dev_err(i2c->dev, "failed to add adapter\n");
 		goto fail_add;
 	}
-	of_i2c_register_devices(&i2c->adap);
 
 	return result;
 
  fail_add:
+	if (i2c->clk_per)
+		clk_disable_unprepare(i2c->clk_per);
 	free_irq(i2c->irq, i2c);
  fail_request:
 	irq_dispose_mapping(i2c->irq);
@@ -716,10 +740,13 @@ static int fsl_i2c_probe(struct platform_device *op)
 
 static int fsl_i2c_remove(struct platform_device *op)
 {
-	struct mpc_i2c *i2c = dev_get_drvdata(&op->dev);
+	struct mpc_i2c *i2c = platform_get_drvdata(op);
 
 	i2c_del_adapter(&i2c->adap);
 
+	if (i2c->clk_per)
+		clk_disable_unprepare(i2c->clk_per);
+
 	if (i2c->irq)
 		free_irq(i2c->irq, i2c);
 
@@ -729,7 +756,7 @@ static int fsl_i2c_remove(struct platform_device *op)
 	return 0;
 };
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int mpc_i2c_suspend(struct device *dev)
 {
 	struct mpc_i2c *i2c = dev_get_drvdata(dev);
@@ -750,7 +777,10 @@ static int mpc_i2c_resume(struct device *dev)
 	return 0;
 }
 
-SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+static SIMPLE_DEV_PM_OPS(mpc_i2c_pm_ops, mpc_i2c_suspend, mpc_i2c_resume);
+#define MPC_I2C_PM_OPS	(&mpc_i2c_pm_ops)
+#else
+#define MPC_I2C_PM_OPS	NULL
 #endif
 
 static const struct mpc_i2c_data mpc_i2c_data_512x = {
@@ -797,9 +827,7 @@ static struct platform_driver mpc_i2c_driver = {
 		.owner = THIS_MODULE,
 		.name = DRV_NAME,
 		.of_match_table = mpc_i2c_of_match,
-#ifdef CONFIG_PM
-		.pm = &mpc_i2c_pm_ops,
-#endif
+		.pm = MPC_I2C_PM_OPS,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index 1a3abd6..8be7e42 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -19,19 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/io.h>
 #include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/of_irq.h>
-#include <linux/of_i2c.h>
 #include <linux/clk.h>
 #include <linux/err.h>
+#include <linux/delay.h>
 
-/* Register defines */
-#define	MV64XXX_I2C_REG_SLAVE_ADDR			0x00
-#define	MV64XXX_I2C_REG_DATA				0x04
-#define	MV64XXX_I2C_REG_CONTROL				0x08
-#define	MV64XXX_I2C_REG_STATUS				0x0c
-#define	MV64XXX_I2C_REG_BAUD				0x0c
-#define	MV64XXX_I2C_REG_EXT_SLAVE_ADDR			0x10
-#define	MV64XXX_I2C_REG_SOFT_RESET			0x1c
+#define MV64XXX_I2C_ADDR_ADDR(val)			((val & 0x7f) << 1)
+#define MV64XXX_I2C_BAUD_DIV_N(val)			(val & 0x7)
+#define MV64XXX_I2C_BAUD_DIV_M(val)			((val & 0xf) << 3)
 
 #define	MV64XXX_I2C_REG_CONTROL_ACK			0x00000004
 #define	MV64XXX_I2C_REG_CONTROL_IFLG			0x00000008
@@ -59,6 +55,32 @@
 #define	MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK	0xe8
 #define	MV64XXX_I2C_STATUS_NO_STATUS			0xf8
 
+/* Register defines (I2C bridge) */
+#define	MV64XXX_I2C_REG_TX_DATA_LO			0xc0
+#define	MV64XXX_I2C_REG_TX_DATA_HI			0xc4
+#define	MV64XXX_I2C_REG_RX_DATA_LO			0xc8
+#define	MV64XXX_I2C_REG_RX_DATA_HI			0xcc
+#define	MV64XXX_I2C_REG_BRIDGE_CONTROL			0xd0
+#define	MV64XXX_I2C_REG_BRIDGE_STATUS			0xd4
+#define	MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE		0xd8
+#define	MV64XXX_I2C_REG_BRIDGE_INTR_MASK		0xdC
+#define	MV64XXX_I2C_REG_BRIDGE_TIMING			0xe0
+
+/* Bridge Control values */
+#define	MV64XXX_I2C_BRIDGE_CONTROL_WR			0x00000001
+#define	MV64XXX_I2C_BRIDGE_CONTROL_RD			0x00000002
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT		2
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT		0x00001000
+#define	MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT	13
+#define	MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT	16
+#define	MV64XXX_I2C_BRIDGE_CONTROL_ENABLE		0x00080000
+
+/* Bridge Status values */
+#define	MV64XXX_I2C_BRIDGE_STATUS_ERROR			0x00000001
+#define	MV64XXX_I2C_STATUS_OFFLOAD_ERROR		0xf0000001
+#define	MV64XXX_I2C_STATUS_OFFLOAD_OK			0xf0000000
+
+
 /* Driver states */
 enum {
 	MV64XXX_I2C_STATE_INVALID,
@@ -75,25 +97,39 @@ enum {
 enum {
 	MV64XXX_I2C_ACTION_INVALID,
 	MV64XXX_I2C_ACTION_CONTINUE,
+	MV64XXX_I2C_ACTION_OFFLOAD_SEND_START,
 	MV64XXX_I2C_ACTION_SEND_START,
 	MV64XXX_I2C_ACTION_SEND_RESTART,
+	MV64XXX_I2C_ACTION_OFFLOAD_RESTART,
 	MV64XXX_I2C_ACTION_SEND_ADDR_1,
 	MV64XXX_I2C_ACTION_SEND_ADDR_2,
 	MV64XXX_I2C_ACTION_SEND_DATA,
 	MV64XXX_I2C_ACTION_RCV_DATA,
 	MV64XXX_I2C_ACTION_RCV_DATA_STOP,
 	MV64XXX_I2C_ACTION_SEND_STOP,
+	MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP,
+};
+
+struct mv64xxx_i2c_regs {
+	u8	addr;
+	u8	ext_addr;
+	u8	data;
+	u8	control;
+	u8	status;
+	u8	clock;
+	u8	soft_reset;
 };
 
 struct mv64xxx_i2c_data {
+	struct i2c_msg		*msgs;
+	int			num_msgs;
 	int			irq;
 	u32			state;
 	u32			action;
 	u32			aborting;
 	u32			cntl_bits;
 	void __iomem		*reg_base;
-	u32			reg_base_p;
-	u32			reg_size;
+	struct mv64xxx_i2c_regs	reg_offsets;
 	u32			addr1;
 	u32			addr2;
 	u32			bytes_left;
@@ -110,8 +146,128 @@ struct mv64xxx_i2c_data {
 	spinlock_t		lock;
 	struct i2c_msg		*msg;
 	struct i2c_adapter	adapter;
+	bool			offload_enabled;
+/* 5us delay in order to avoid repeated start timing violation */
+	bool			errata_delay;
+};
+
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_mv64xxx = {
+	.addr		= 0x00,
+	.ext_addr	= 0x10,
+	.data		= 0x04,
+	.control	= 0x08,
+	.status		= 0x0c,
+	.clock		= 0x0c,
+	.soft_reset	= 0x1c,
 };
 
+static struct mv64xxx_i2c_regs mv64xxx_i2c_regs_sun4i = {
+	.addr		= 0x00,
+	.ext_addr	= 0x04,
+	.data		= 0x08,
+	.control	= 0x0c,
+	.status		= 0x10,
+	.clock		= 0x14,
+	.soft_reset	= 0x18,
+};
+
+static void
+mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
+	struct i2c_msg *msg)
+{
+	u32	dir = 0;
+
+	drv_data->msg = msg;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
+		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
+
+	if (msg->flags & I2C_M_RD)
+		dir = 1;
+
+	if (msg->flags & I2C_M_TEN) {
+		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
+		drv_data->addr2 = (u32)msg->addr & 0xff;
+	} else {
+		drv_data->addr1 = MV64XXX_I2C_ADDR_ADDR((u32)msg->addr) | dir;
+		drv_data->addr2 = 0;
+	}
+}
+
+static int mv64xxx_i2c_offload_msg(struct mv64xxx_i2c_data *drv_data)
+{
+	unsigned long data_reg_hi = 0;
+	unsigned long data_reg_lo = 0;
+	unsigned long ctrl_reg;
+	struct i2c_msg *msg = drv_data->msgs;
+
+	drv_data->msg = msg;
+	drv_data->byte_posn = 0;
+	drv_data->bytes_left = msg->len;
+	drv_data->aborting = 0;
+	drv_data->rc = 0;
+	/* Only regular transactions can be offloaded */
+	if ((msg->flags & ~(I2C_M_TEN | I2C_M_RD)) != 0)
+		return -EINVAL;
+
+	/* Only 1-8 byte transfers can be offloaded */
+	if (msg->len < 1 || msg->len > 8)
+		return -EINVAL;
+
+	/* Build transaction */
+	ctrl_reg = MV64XXX_I2C_BRIDGE_CONTROL_ENABLE |
+		   (msg->addr << MV64XXX_I2C_BRIDGE_CONTROL_ADDR_SHIFT);
+
+	if ((msg->flags & I2C_M_TEN) != 0)
+		ctrl_reg |=  MV64XXX_I2C_BRIDGE_CONTROL_ADDR_EXT;
+
+	if ((msg->flags & I2C_M_RD) == 0) {
+		u8 local_buf[8] = { 0 };
+
+		memcpy(local_buf, msg->buf, msg->len);
+		data_reg_lo = cpu_to_le32(*((u32 *)local_buf));
+		data_reg_hi = cpu_to_le32(*((u32 *)(local_buf+4)));
+
+		ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_WR |
+		    (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_TX_SIZE_SHIFT;
+
+		writel(data_reg_lo,
+			drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_LO);
+		writel(data_reg_hi,
+			drv_data->reg_base + MV64XXX_I2C_REG_TX_DATA_HI);
+
+	} else {
+		ctrl_reg |= MV64XXX_I2C_BRIDGE_CONTROL_RD |
+		    (msg->len - 1) << MV64XXX_I2C_BRIDGE_CONTROL_RX_SIZE_SHIFT;
+	}
+
+	/* Execute transaction */
+	writel(ctrl_reg, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+
+	return 0;
+}
+
+static void
+mv64xxx_i2c_update_offload_data(struct mv64xxx_i2c_data *drv_data)
+{
+	struct i2c_msg *msg = drv_data->msg;
+
+	if (msg->flags & I2C_M_RD) {
+		u32 data_reg_lo = readl(drv_data->reg_base +
+				MV64XXX_I2C_REG_RX_DATA_LO);
+		u32 data_reg_hi = readl(drv_data->reg_base +
+				MV64XXX_I2C_REG_RX_DATA_HI);
+		u8 local_buf[8] = { 0 };
+
+		*((u32 *)local_buf) = le32_to_cpu(data_reg_lo);
+		*((u32 *)(local_buf+4)) = le32_to_cpu(data_reg_hi);
+		memcpy(msg->buf, local_buf, msg->len);
+	}
+
+}
 /*
  *****************************************************************************
  *
@@ -124,13 +280,22 @@ struct mv64xxx_i2c_data {
 static void
 mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data)
 {
-	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET);
-	writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)),
-		drv_data->reg_base + MV64XXX_I2C_REG_BAUD);
-	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR);
-	writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR);
+	if (drv_data->offload_enabled) {
+		writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_CONTROL);
+		writel(0, drv_data->reg_base + MV64XXX_I2C_REG_BRIDGE_TIMING);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_MASK);
+	}
+
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.soft_reset);
+	writel(MV64XXX_I2C_BAUD_DIV_M(drv_data->freq_m) | MV64XXX_I2C_BAUD_DIV_N(drv_data->freq_n),
+		drv_data->reg_base + drv_data->reg_offsets.clock);
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.addr);
+	writel(0, drv_data->reg_base + drv_data->reg_offsets.ext_addr);
 	writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP,
-		drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+		drv_data->reg_base + drv_data->reg_offsets.control);
 	drv_data->state = MV64XXX_I2C_STATE_IDLE;
 }
 
@@ -170,7 +335,7 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 		if ((drv_data->bytes_left == 0)
 				|| (drv_data->aborting
 					&& (drv_data->byte_posn != 0))) {
-			if (drv_data->send_stop) {
+			if (drv_data->send_stop || drv_data->aborting) {
 				drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
 				drv_data->state = MV64XXX_I2C_STATE_IDLE;
 			} else {
@@ -227,7 +392,17 @@ mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status)
 		/* Doesn't seem to be a device at other end */
 		drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP;
 		drv_data->state = MV64XXX_I2C_STATE_IDLE;
-		drv_data->rc = -ENODEV;
+		drv_data->rc = -ENXIO;
+		break;
+
+	case MV64XXX_I2C_STATUS_OFFLOAD_OK:
+		if (drv_data->send_stop || drv_data->aborting) {
+			drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP;
+			drv_data->state = MV64XXX_I2C_STATE_IDLE;
+		} else {
+			drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_RESTART;
+			drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_RESTART;
+		}
 		break;
 
 	default:
@@ -246,60 +421,92 @@ static void
 mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 {
 	switch(drv_data->action) {
+	case MV64XXX_I2C_ACTION_OFFLOAD_RESTART:
+		mv64xxx_i2c_update_offload_data(drv_data);
+		writel(0, drv_data->reg_base +	MV64XXX_I2C_REG_BRIDGE_CONTROL);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
+		/* FALLTHRU */
 	case MV64XXX_I2C_ACTION_SEND_RESTART:
-		drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
-		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
-		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
-		drv_data->block = 0;
-		wake_up(&drv_data->waitq);
+		/* We should only get here if we have further messages */
+		BUG_ON(drv_data->num_msgs == 0);
+
+		drv_data->msgs++;
+		drv_data->num_msgs--;
+		if (!(drv_data->offload_enabled &&
+				mv64xxx_i2c_offload_msg(drv_data))) {
+			drv_data->cntl_bits |= MV64XXX_I2C_REG_CONTROL_START;
+			writel(drv_data->cntl_bits,
+			drv_data->reg_base + drv_data->reg_offsets.control);
+
+			/* Setup for the next message */
+			mv64xxx_i2c_prepare_for_io(drv_data, drv_data->msgs);
+		}
+		if (drv_data->errata_delay)
+			udelay(5);
+
+		/*
+		 * We're never at the start of the message here, and by this
+		 * time it's already too late to do any protocol mangling.
+		 * Thankfully, do not advertise support for that feature.
+		 */
+		drv_data->send_stop = drv_data->num_msgs == 1;
 		break;
 
 	case MV64XXX_I2C_ACTION_CONTINUE:
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
+	case MV64XXX_I2C_ACTION_OFFLOAD_SEND_START:
+		if (!mv64xxx_i2c_offload_msg(drv_data))
+			break;
+		else
+			drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+		/* FALLTHRU */
 	case MV64XXX_I2C_ACTION_SEND_START:
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_SEND_ADDR_1:
 		writel(drv_data->addr1,
-			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_SEND_ADDR_2:
 		writel(drv_data->addr2,
-			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_SEND_DATA:
 		writel(drv_data->msg->buf[drv_data->byte_posn++],
-			drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_RCV_DATA:
 		drv_data->msg->buf[drv_data->byte_posn++] =
-			readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			readl(drv_data->reg_base + drv_data->reg_offsets.data);
 		writel(drv_data->cntl_bits,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		break;
 
 	case MV64XXX_I2C_ACTION_RCV_DATA_STOP:
 		drv_data->msg->buf[drv_data->byte_posn++] =
-			readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA);
+			readl(drv_data->reg_base + drv_data->reg_offsets.data);
 		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
 		drv_data->block = 0;
+		if (drv_data->errata_delay)
+			udelay(5);
+
 		wake_up(&drv_data->waitq);
 		break;
 
@@ -309,11 +516,21 @@ mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data)
 			"mv64xxx_i2c_do_action: Invalid action: %d\n",
 			drv_data->action);
 		drv_data->rc = -EIO;
+
 		/* FALLTHRU */
 	case MV64XXX_I2C_ACTION_SEND_STOP:
 		drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN;
 		writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP,
-			drv_data->reg_base + MV64XXX_I2C_REG_CONTROL);
+			drv_data->reg_base + drv_data->reg_offsets.control);
+		drv_data->block = 0;
+		wake_up(&drv_data->waitq);
+		break;
+
+	case MV64XXX_I2C_ACTION_OFFLOAD_SEND_STOP:
+		mv64xxx_i2c_update_offload_data(drv_data);
+		writel(0, drv_data->reg_base +	MV64XXX_I2C_REG_BRIDGE_CONTROL);
+		writel(0, drv_data->reg_base +
+			MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE);
 		drv_data->block = 0;
 		wake_up(&drv_data->waitq);
 		break;
@@ -329,9 +546,24 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
 	irqreturn_t	rc = IRQ_NONE;
 
 	spin_lock_irqsave(&drv_data->lock, flags);
-	while (readl(drv_data->reg_base + MV64XXX_I2C_REG_CONTROL) &
+
+	if (drv_data->offload_enabled) {
+		while (readl(drv_data->reg_base +
+				MV64XXX_I2C_REG_BRIDGE_INTR_CAUSE)) {
+			int reg_status = readl(drv_data->reg_base +
+					MV64XXX_I2C_REG_BRIDGE_STATUS);
+			if (reg_status & MV64XXX_I2C_BRIDGE_STATUS_ERROR)
+				status = MV64XXX_I2C_STATUS_OFFLOAD_ERROR;
+			else
+				status = MV64XXX_I2C_STATUS_OFFLOAD_OK;
+			mv64xxx_i2c_fsm(drv_data, status);
+			mv64xxx_i2c_do_action(drv_data);
+			rc = IRQ_HANDLED;
+		}
+	}
+	while (readl(drv_data->reg_base + drv_data->reg_offsets.control) &
 						MV64XXX_I2C_REG_CONTROL_IFLG) {
-		status = readl(drv_data->reg_base + MV64XXX_I2C_REG_STATUS);
+		status = readl(drv_data->reg_base + drv_data->reg_offsets.status);
 		mv64xxx_i2c_fsm(drv_data, status);
 		mv64xxx_i2c_do_action(drv_data);
 		rc = IRQ_HANDLED;
@@ -349,32 +581,6 @@ mv64xxx_i2c_intr(int irq, void *dev_id)
  *****************************************************************************
  */
 static void
-mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data,
-	struct i2c_msg *msg)
-{
-	u32	dir = 0;
-
-	drv_data->msg = msg;
-	drv_data->byte_posn = 0;
-	drv_data->bytes_left = msg->len;
-	drv_data->aborting = 0;
-	drv_data->rc = 0;
-	drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK |
-		MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN;
-
-	if (msg->flags & I2C_M_RD)
-		dir = 1;
-
-	if (msg->flags & I2C_M_TEN) {
-		drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir;
-		drv_data->addr2 = (u32)msg->addr & 0xff;
-	} else {
-		drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir;
-		drv_data->addr2 = 0;
-	}
-}
-
-static void
 mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
 {
 	long		time_left;
@@ -414,37 +620,20 @@ mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data)
 
 static int
 mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg,
-				int is_first, int is_last)
+				int is_last)
 {
 	unsigned long	flags;
 
 	spin_lock_irqsave(&drv_data->lock, flags);
-	mv64xxx_i2c_prepare_for_io(drv_data, msg);
-
-	if (unlikely(msg->flags & I2C_M_NOSTART)) { /* Skip start/addr phases */
-		if (drv_data->msg->flags & I2C_M_RD) {
-			/* No action to do, wait for slave to send a byte */
-			drv_data->action = MV64XXX_I2C_ACTION_CONTINUE;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA;
-		} else {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK;
-			drv_data->bytes_left--;
-		}
+	if (drv_data->offload_enabled) {
+		drv_data->action = MV64XXX_I2C_ACTION_OFFLOAD_SEND_START;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
 	} else {
-		if (is_first) {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
-		} else {
-			drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1;
-			drv_data->state =
-				MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK;
-		}
-	}
+		mv64xxx_i2c_prepare_for_io(drv_data, msg);
 
+		drv_data->action = MV64XXX_I2C_ACTION_SEND_START;
+		drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND;
+	}
 	drv_data->send_stop = is_last;
 	drv_data->block = 1;
 	mv64xxx_i2c_do_action(drv_data);
@@ -471,16 +660,20 @@ static int
 mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 {
 	struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap);
-	int	i, rc;
+	int rc, ret = num;
 
-	for (i = 0; i < num; i++) {
-		rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i],
-						i == 0, i + 1 == num);
-		if (rc < 0)
-			return rc;
-	}
+	BUG_ON(drv_data->msgs != NULL);
+	drv_data->msgs = msgs;
+	drv_data->num_msgs = num;
 
-	return num;
+	rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[0], num == 1);
+	if (rc < 0)
+		ret = rc;
+
+	drv_data->num_msgs = 0;
+	drv_data->msgs = NULL;
+
+	return ret;
 }
 
 static const struct i2c_algorithm mv64xxx_i2c_algo = {
@@ -495,41 +688,16 @@ static const struct i2c_algorithm mv64xxx_i2c_algo = {
  *
  *****************************************************************************
  */
-static int
-mv64xxx_i2c_map_regs(struct platform_device *pd,
-	struct mv64xxx_i2c_data *drv_data)
-{
-	int size;
-	struct resource	*r = platform_get_resource(pd, IORESOURCE_MEM, 0);
-
-	if (!r)
-		return -ENODEV;
-
-	size = resource_size(r);
-
-	if (!request_mem_region(r->start, size, drv_data->adapter.name))
-		return -EBUSY;
-
-	drv_data->reg_base = ioremap(r->start, size);
-	drv_data->reg_base_p = r->start;
-	drv_data->reg_size = size;
-
-	return 0;
-}
-
-static void
-mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data)
-{
-	if (drv_data->reg_base) {
-		iounmap(drv_data->reg_base);
-		release_mem_region(drv_data->reg_base_p, drv_data->reg_size);
-	}
-
-	drv_data->reg_base = NULL;
-	drv_data->reg_base_p = 0;
-}
+static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
+	{ .compatible = "allwinner,sun4i-i2c", .data = &mv64xxx_i2c_regs_sun4i},
+	{ .compatible = "marvell,mv64xxx-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{ .compatible = "marvell,mv78230-i2c", .data = &mv64xxx_i2c_regs_mv64xxx},
+	{}
+};
+MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
 
 #ifdef CONFIG_OF
+#ifdef CONFIG_HAVE_CLK
 static int
 mv64xxx_calc_freq(const int tclk, const int n, const int m)
 {
@@ -559,14 +727,12 @@ mv64xxx_find_baud_factors(const u32 req_freq, const u32 tclk, u32 *best_n,
 		return false;
 	return true;
 }
+#endif /* CONFIG_HAVE_CLK */
 
 static int
 mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
-		  struct device_node *np)
+		  struct device *dev)
 {
-	u32 bus_freq, tclk;
-	int rc = 0;
-
 	/* CLK is mandatory when using DT to describe the i2c bus. We
 	 * need to know tclk in order to calculate bus clock
 	 * factors.
@@ -575,12 +741,21 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	/* Have OF but no CLK */
 	return -ENODEV;
 #else
+	const struct of_device_id *device;
+	struct device_node *np = dev->of_node;
+	u32 bus_freq, tclk;
+	int rc = 0;
+
 	if (IS_ERR(drv_data->clk)) {
 		rc = -ENODEV;
 		goto out;
 	}
 	tclk = clk_get_rate(drv_data->clk);
-	of_property_read_u32(np, "clock-frequency", &bus_freq);
+
+	rc = of_property_read_u32(np, "clock-frequency", &bus_freq);
+	if (rc)
+		bus_freq = 100000; /* 100kHz by default */
+
 	if (!mv64xxx_find_baud_factors(bus_freq, tclk,
 				       &drv_data->freq_n, &drv_data->freq_m)) {
 		rc = -EINVAL;
@@ -592,6 +767,22 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
 	 * So hard code the value to 1 second.
 	 */
 	drv_data->adapter.timeout = HZ;
+
+	device = of_match_device(mv64xxx_i2c_of_match_table, dev);
+	if (!device)
+		return -ENODEV;
+
+	memcpy(&drv_data->reg_offsets, device->data, sizeof(drv_data->reg_offsets));
+
+	/*
+	 * For controllers embedded in new SoCs activate the
+	 * Transaction Generator support and the errata fix.
+	 */
+	if (of_device_is_compatible(np, "marvell,mv78230-i2c")) {
+		drv_data->offload_enabled = true;
+		drv_data->errata_delay = true;
+	}
+
 out:
 	return rc;
 #endif
@@ -599,7 +790,7 @@ out:
 #else /* CONFIG_OF */
 static int
 mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data,
-		  struct device_node *np)
+		  struct device *dev)
 {
 	return -ENODEV;
 }
@@ -609,20 +800,22 @@ static int
 mv64xxx_i2c_probe(struct platform_device *pd)
 {
 	struct mv64xxx_i2c_data		*drv_data;
-	struct mv64xxx_i2c_pdata	*pdata = pd->dev.platform_data;
+	struct mv64xxx_i2c_pdata	*pdata = dev_get_platdata(&pd->dev);
+	struct resource	*r;
 	int	rc;
 
 	if ((!pdata && !pd->dev.of_node))
 		return -ENODEV;
 
-	drv_data = kzalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL);
+	drv_data = devm_kzalloc(&pd->dev, sizeof(struct mv64xxx_i2c_data),
+				GFP_KERNEL);
 	if (!drv_data)
 		return -ENOMEM;
 
-	if (mv64xxx_i2c_map_regs(pd, drv_data)) {
-		rc = -ENODEV;
-		goto exit_kfree;
-	}
+	r = platform_get_resource(pd, IORESOURCE_MEM, 0);
+	drv_data->reg_base = devm_ioremap_resource(&pd->dev, r);
+	if (IS_ERR(drv_data->reg_base))
+		return PTR_ERR(drv_data->reg_base);
 
 	strlcpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter",
 		sizeof(drv_data->adapter.name));
@@ -632,7 +825,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
-	drv_data->clk = clk_get(&pd->dev, NULL);
+	drv_data->clk = devm_clk_get(&pd->dev, NULL);
 	if (!IS_ERR(drv_data->clk)) {
 		clk_prepare(drv_data->clk);
 		clk_enable(drv_data->clk);
@@ -643,14 +836,16 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		drv_data->freq_n = pdata->freq_n;
 		drv_data->irq = platform_get_irq(pd, 0);
 		drv_data->adapter.timeout = msecs_to_jiffies(pdata->timeout);
+		drv_data->offload_enabled = false;
+		memcpy(&drv_data->reg_offsets, &mv64xxx_i2c_regs_mv64xxx, sizeof(drv_data->reg_offsets));
 	} else if (pd->dev.of_node) {
-		rc = mv64xxx_of_config(drv_data, pd->dev.of_node);
+		rc = mv64xxx_of_config(drv_data, &pd->dev);
 		if (rc)
-			goto exit_unmap_regs;
+			goto exit_clk;
 	}
 	if (drv_data->irq < 0) {
 		rc = -ENXIO;
-		goto exit_unmap_regs;
+		goto exit_clk;
 	}
 
 	drv_data->adapter.dev.parent = &pd->dev;
@@ -664,26 +859,24 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 
 	mv64xxx_i2c_hw_init(drv_data);
 
-	if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
-			MV64XXX_I2C_CTLR_NAME, drv_data)) {
+	rc = request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
+			 MV64XXX_I2C_CTLR_NAME, drv_data);
+	if (rc) {
 		dev_err(&drv_data->adapter.dev,
-			"mv64xxx: Can't register intr handler irq: %d\n",
-			drv_data->irq);
-		rc = -EINVAL;
-		goto exit_unmap_regs;
+			"mv64xxx: Can't register intr handler irq%d: %d\n",
+			drv_data->irq, rc);
+		goto exit_clk;
 	} else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
 		dev_err(&drv_data->adapter.dev,
 			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
 		goto exit_free_irq;
 	}
 
-	of_i2c_register_devices(&drv_data->adapter);
-
 	return 0;
 
-	exit_free_irq:
-		free_irq(drv_data->irq, drv_data);
-	exit_unmap_regs:
+exit_free_irq:
+	free_irq(drv_data->irq, drv_data);
+exit_clk:
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	if (!IS_ERR(drv_data->clk)) {
@@ -691,9 +884,6 @@ mv64xxx_i2c_probe(struct platform_device *pd)
 		clk_unprepare(drv_data->clk);
 	}
 #endif
-		mv64xxx_i2c_unmap_regs(drv_data);
-	exit_kfree:
-		kfree(drv_data);
 	return rc;
 }
 
@@ -704,7 +894,6 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 
 	i2c_del_adapter(&drv_data->adapter);
 	free_irq(drv_data->irq, drv_data);
-	mv64xxx_i2c_unmap_regs(drv_data);
 #if defined(CONFIG_HAVE_CLK)
 	/* Not all platforms have a clk */
 	if (!IS_ERR(drv_data->clk)) {
@@ -712,24 +901,17 @@ mv64xxx_i2c_remove(struct platform_device *dev)
 		clk_unprepare(drv_data->clk);
 	}
 #endif
-	kfree(drv_data);
 
 	return 0;
 }
 
-static const struct of_device_id mv64xxx_i2c_of_match_table[] = {
-	{ .compatible = "marvell,mv64xxx-i2c", },
-	{}
-};
-MODULE_DEVICE_TABLE(of, mv64xxx_i2c_of_match_table);
-
 static struct platform_driver mv64xxx_i2c_driver = {
 	.probe	= mv64xxx_i2c_probe,
 	.remove	= mv64xxx_i2c_remove,
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= MV64XXX_I2C_CTLR_NAME,
-		.of_match_table = of_match_ptr(mv64xxx_i2c_of_match_table),
+		.of_match_table = mv64xxx_i2c_of_match_table,
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 2039f23..0cde4e6 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -1,6 +1,7 @@
 /*
  * Freescale MXS I2C bus driver
  *
+ * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
  * Copyright (C) 2011-2012 Wolfram Sang, Pengutronix e.K.
  *
  * based on a (non-working) driver which was:
@@ -24,11 +25,9 @@
 #include <linux/platform_device.h>
 #include <linux/jiffies.h>
 #include <linux/io.h>
-#include <linux/pinctrl/consumer.h>
 #include <linux/stmp_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/dma-mapping.h>
 #include <linux/dmaengine.h>
 
@@ -36,10 +35,12 @@
 
 #define MXS_I2C_CTRL0		(0x00)
 #define MXS_I2C_CTRL0_SET	(0x04)
+#define MXS_I2C_CTRL0_CLR	(0x08)
 
 #define MXS_I2C_CTRL0_SFTRST			0x80000000
 #define MXS_I2C_CTRL0_RUN			0x20000000
 #define MXS_I2C_CTRL0_SEND_NAK_ON_LAST		0x02000000
+#define MXS_I2C_CTRL0_PIO_MODE			0x01000000
 #define MXS_I2C_CTRL0_RETAIN_CLOCK		0x00200000
 #define MXS_I2C_CTRL0_POST_SEND_STOP		0x00100000
 #define MXS_I2C_CTRL0_PRE_SEND_START		0x00080000
@@ -66,13 +67,13 @@
 #define MXS_I2C_CTRL1_SLAVE_IRQ			0x01
 
 #define MXS_I2C_STAT		(0x50)
+#define MXS_I2C_STAT_GOT_A_NAK			0x10000000
 #define MXS_I2C_STAT_BUS_BUSY			0x00000800
 #define MXS_I2C_STAT_CLK_GEN_BUSY		0x00000400
 
-#define MXS_I2C_DATA		(0xa0)
+#define MXS_I2C_DATA(i2c)	((i2c->dev_type == MXS_I2C_V1) ? 0x60 : 0xa0)
 
-#define MXS_I2C_DEBUG0		(0xb0)
-#define MXS_I2C_DEBUG0_CLR	(0xb8)
+#define MXS_I2C_DEBUG0_CLR(i2c)	((i2c->dev_type == MXS_I2C_V1) ? 0x78 : 0xb8)
 
 #define MXS_I2C_DEBUG0_DMAREQ	0x80000000
 
@@ -97,10 +98,17 @@
 #define MXS_CMD_I2C_READ	(MXS_I2C_CTRL0_SEND_NAK_ON_LAST | \
 				 MXS_I2C_CTRL0_MASTER_MODE)
 
+enum mxs_i2c_devtype {
+	MXS_I2C_UNKNOWN = 0,
+	MXS_I2C_V1,
+	MXS_I2C_V2,
+};
+
 /**
  * struct mxs_i2c_dev - per device, private MXS-I2C data
  *
  * @dev: driver model device node
+ * @dev_type: distinguish i.MX23/i.MX28 features
  * @regs: IO registers pointer
  * @cmd_complete: completion object for transaction wait
  * @cmd_err: error code for last transaction
@@ -108,6 +116,7 @@
  */
 struct mxs_i2c_dev {
 	struct device *dev;
+	enum mxs_i2c_devtype dev_type;
 	void __iomem *regs;
 	struct completion cmd_complete;
 	int cmd_err;
@@ -115,18 +124,21 @@ struct mxs_i2c_dev {
 
 	uint32_t timing0;
 	uint32_t timing1;
+	uint32_t timing2;
 
 	/* DMA support components */
-	struct dma_chan         	*dmach;
+	struct dma_chan			*dmach;
 	uint32_t			pio_data[2];
 	uint32_t			addr_data;
 	struct scatterlist		sg_io[2];
 	bool				dma_read;
 };
 
-static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
+static int mxs_i2c_reset(struct mxs_i2c_dev *i2c)
 {
-	stmp_reset_block(i2c->regs);
+	int ret = stmp_reset_block(i2c->regs);
+	if (ret)
+		return ret;
 
 	/*
 	 * Configure timing for the I2C block. The I2C TIMING2 register has to
@@ -137,9 +149,11 @@ static void mxs_i2c_reset(struct mxs_i2c_dev *i2c)
 	 */
 	writel(i2c->timing0, i2c->regs + MXS_I2C_TIMING0);
 	writel(i2c->timing1, i2c->regs + MXS_I2C_TIMING1);
-	writel(0x00300030, i2c->regs + MXS_I2C_TIMING2);
+	writel(i2c->timing2, i2c->regs + MXS_I2C_TIMING2);
 
 	writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
+
+	return 0;
 }
 
 static void mxs_i2c_dma_finish(struct mxs_i2c_dev *i2c)
@@ -288,48 +302,11 @@ write_init_pio_fail:
 	return -EINVAL;
 }
 
-static int mxs_i2c_pio_wait_dmareq(struct mxs_i2c_dev *i2c)
-{
-	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
-
-	while (!(readl(i2c->regs + MXS_I2C_DEBUG0) &
-		MXS_I2C_DEBUG0_DMAREQ)) {
-		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
-		cond_resched();
-	}
-
-	return 0;
-}
-
-static int mxs_i2c_pio_wait_cplt(struct mxs_i2c_dev *i2c, int last)
+static int mxs_i2c_pio_wait_xfer_end(struct mxs_i2c_dev *i2c)
 {
 	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
 
-	/*
-	 * We do not use interrupts in the PIO mode. Due to the
-	 * maximum transfer length being 8 bytes in PIO mode, the
-	 * overhead of interrupt would be too large and this would
-	 * neglect the gain from using the PIO mode.
-	 */
-
-	while (!(readl(i2c->regs + MXS_I2C_CTRL1) &
-		MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ)) {
-		if (time_after(jiffies, timeout))
-			return -ETIMEDOUT;
-		cond_resched();
-	}
-
-	writel(MXS_I2C_CTRL1_DATA_ENGINE_CMPLT_IRQ,
-		i2c->regs + MXS_I2C_CTRL1_CLR);
-
-	/*
-	 * When ending a transfer with a stop, we have to wait for the bus to
-	 * go idle before we report the transfer as completed. Otherwise the
-	 * start of the next transfer may race with the end of the current one.
-	 */
-	while (last && (readl(i2c->regs + MXS_I2C_STAT) &
-			(MXS_I2C_STAT_BUS_BUSY | MXS_I2C_STAT_CLK_GEN_BUSY))) {
+	while (readl(i2c->regs + MXS_I2C_CTRL0) & MXS_I2C_CTRL0_RUN) {
 		if (time_after(jiffies, timeout))
 			return -ETIMEDOUT;
 		cond_resched();
@@ -367,106 +344,215 @@ static void mxs_i2c_pio_trigger_cmd(struct mxs_i2c_dev *i2c, u32 cmd)
 	writel(reg, i2c->regs + MXS_I2C_CTRL0);
 }
 
+/*
+ * Start WRITE transaction on the I2C bus. By studying i.MX23 datasheet,
+ * CTRL0::PIO_MODE bit description clarifies the order in which the registers
+ * must be written during PIO mode operation. First, the CTRL0 register has
+ * to be programmed with all the necessary bits but the RUN bit. Then the
+ * payload has to be written into the DATA register. Finally, the transmission
+ * is executed by setting the RUN bit in CTRL0.
+ */
+static void mxs_i2c_pio_trigger_write_cmd(struct mxs_i2c_dev *i2c, u32 cmd,
+					  u32 data)
+{
+	writel(cmd, i2c->regs + MXS_I2C_CTRL0);
+
+	if (i2c->dev_type == MXS_I2C_V1)
+		writel(MXS_I2C_CTRL0_PIO_MODE, i2c->regs + MXS_I2C_CTRL0_SET);
+
+	writel(data, i2c->regs + MXS_I2C_DATA(i2c));
+	writel(MXS_I2C_CTRL0_RUN, i2c->regs + MXS_I2C_CTRL0_SET);
+}
+
 static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 			struct i2c_msg *msg, uint32_t flags)
 {
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
 	uint32_t addr_data = msg->addr << 1;
 	uint32_t data = 0;
-	int i, shifts_left, ret;
+	int i, ret, xlen = 0, xmit = 0;
+	uint32_t start;
 
 	/* Mute IRQs coming from this block. */
 	writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_CLR);
 
+	/*
+	 * MX23 idea:
+	 * - Enable CTRL0::PIO_MODE (1 << 24)
+	 * - Enable CTRL1::ACK_MODE (1 << 27)
+	 *
+	 * WARNING! The MX23 is broken in some way, even if it claims
+	 * to support PIO, when we try to transfer any amount of data
+	 * that is not aligned to 4 bytes, the DMA engine will have
+	 * bits in DEBUG1::DMA_BYTES_ENABLES still set even after the
+	 * transfer. This in turn will mess up the next transfer as
+	 * the block it emit one byte write onto the bus terminated
+	 * with a NAK+STOP. A possible workaround is to reset the IP
+	 * block after every PIO transmission, which might just work.
+	 *
+	 * NOTE: The CTRL0::PIO_MODE description is important, since
+	 * it outlines how the PIO mode is really supposed to work.
+	 */
 	if (msg->flags & I2C_M_RD) {
+		/*
+		 * PIO READ transfer:
+		 *
+		 * This transfer MUST be limited to 4 bytes maximum. It is not
+		 * possible to transfer more than four bytes via PIO, since we
+		 * can not in any way make sure we can read the data from the
+		 * DATA register fast enough. Besides, the RX FIFO is only four
+		 * bytes deep, thus we can only really read up to four bytes at
+		 * time. Finally, there is no bit indicating us that new data
+		 * arrived at the FIFO and can thus be fetched from the DATA
+		 * register.
+		 */
+		BUG_ON(msg->len > 4);
+
 		addr_data |= I2C_SMBUS_READ;
 
 		/* SELECT command. */
-		mxs_i2c_pio_trigger_cmd(i2c, MXS_CMD_I2C_SELECT);
-
-		ret = mxs_i2c_pio_wait_dmareq(i2c);
-		if (ret)
-			return ret;
-
-		writel(addr_data, i2c->regs + MXS_I2C_DATA);
-		writel(MXS_I2C_DEBUG0_DMAREQ, i2c->regs + MXS_I2C_DEBUG0_CLR);
-
-		ret = mxs_i2c_pio_wait_cplt(i2c, 0);
-		if (ret)
-			return ret;
+		mxs_i2c_pio_trigger_write_cmd(i2c, MXS_CMD_I2C_SELECT,
+					      addr_data);
 
-		if (mxs_i2c_pio_check_error_state(i2c))
+		ret = mxs_i2c_pio_wait_xfer_end(i2c);
+		if (ret) {
+			dev_err(i2c->dev,
+				"PIO: Failed to send SELECT command!\n");
 			goto cleanup;
+		}
 
 		/* READ command. */
 		mxs_i2c_pio_trigger_cmd(i2c,
 					MXS_CMD_I2C_READ | flags |
 					MXS_I2C_CTRL0_XFER_COUNT(msg->len));
 
+		ret = mxs_i2c_pio_wait_xfer_end(i2c);
+		if (ret) {
+			dev_err(i2c->dev,
+				"PIO: Failed to send SELECT command!\n");
+			goto cleanup;
+		}
+
+		data = readl(i2c->regs + MXS_I2C_DATA(i2c));
 		for (i = 0; i < msg->len; i++) {
-			if ((i & 3) == 0) {
-				ret = mxs_i2c_pio_wait_dmareq(i2c);
-				if (ret)
-					return ret;
-				data = readl(i2c->regs + MXS_I2C_DATA);
-				writel(MXS_I2C_DEBUG0_DMAREQ,
-				       i2c->regs + MXS_I2C_DEBUG0_CLR);
-			}
 			msg->buf[i] = data & 0xff;
 			data >>= 8;
 		}
 	} else {
+		/*
+		 * PIO WRITE transfer:
+		 *
+		 * The code below implements clock stretching to circumvent
+		 * the possibility of kernel not being able to supply data
+		 * fast enough. It is possible to transfer arbitrary amount
+		 * of data using PIO write.
+		 */
 		addr_data |= I2C_SMBUS_WRITE;
 
-		/* WRITE command. */
-		mxs_i2c_pio_trigger_cmd(i2c,
-					MXS_CMD_I2C_WRITE | flags |
-					MXS_I2C_CTRL0_XFER_COUNT(msg->len + 1));
-
 		/*
 		 * The LSB of data buffer is the first byte blasted across
 		 * the bus. Higher order bytes follow. Thus the following
 		 * filling schematic.
 		 */
+
 		data = addr_data << 24;
+
+		/* Start the transfer with START condition. */
+		start = MXS_I2C_CTRL0_PRE_SEND_START;
+
+		/* If the transfer is long, use clock stretching. */
+		if (msg->len > 3)
+			start |= MXS_I2C_CTRL0_RETAIN_CLOCK;
+
 		for (i = 0; i < msg->len; i++) {
 			data >>= 8;
 			data |= (msg->buf[i] << 24);
-			if ((i & 3) == 2) {
-				ret = mxs_i2c_pio_wait_dmareq(i2c);
-				if (ret)
-					return ret;
-				writel(data, i2c->regs + MXS_I2C_DATA);
-				writel(MXS_I2C_DEBUG0_DMAREQ,
-				       i2c->regs + MXS_I2C_DEBUG0_CLR);
+
+			xmit = 0;
+
+			/* This is the last transfer of the message. */
+			if (i + 1 == msg->len) {
+				/* Add optional STOP flag. */
+				start |= flags;
+				/* Remove RETAIN_CLOCK bit. */
+				start &= ~MXS_I2C_CTRL0_RETAIN_CLOCK;
+				xmit = 1;
 			}
-		}
 
-		shifts_left = 24 - (i & 3) * 8;
-		if (shifts_left) {
-			data >>= shifts_left;
-			ret = mxs_i2c_pio_wait_dmareq(i2c);
-			if (ret)
-				return ret;
-			writel(data, i2c->regs + MXS_I2C_DATA);
+			/* Four bytes are ready in the "data" variable. */
+			if ((i & 3) == 2)
+				xmit = 1;
+
+			/* Nothing interesting happened, continue stuffing. */
+			if (!xmit)
+				continue;
+
+			/*
+			 * Compute the size of the transfer and shift the
+			 * data accordingly.
+			 *
+			 * i = (4k + 0) .... xlen = 2
+			 * i = (4k + 1) .... xlen = 3
+			 * i = (4k + 2) .... xlen = 4
+			 * i = (4k + 3) .... xlen = 1
+			 */
+
+			if ((i % 4) == 3)
+				xlen = 1;
+			else
+				xlen = (i % 4) + 2;
+
+			data >>= (4 - xlen) * 8;
+
+			dev_dbg(i2c->dev,
+				"PIO: len=%i pos=%i total=%i [W%s%s%s]\n",
+				xlen, i, msg->len,
+				start & MXS_I2C_CTRL0_PRE_SEND_START ? "S" : "",
+				start & MXS_I2C_CTRL0_POST_SEND_STOP ? "E" : "",
+				start & MXS_I2C_CTRL0_RETAIN_CLOCK ? "C" : "");
+
 			writel(MXS_I2C_DEBUG0_DMAREQ,
-			       i2c->regs + MXS_I2C_DEBUG0_CLR);
+			       i2c->regs + MXS_I2C_DEBUG0_CLR(i2c));
+
+			mxs_i2c_pio_trigger_write_cmd(i2c,
+				start | MXS_I2C_CTRL0_MASTER_MODE |
+				MXS_I2C_CTRL0_DIRECTION |
+				MXS_I2C_CTRL0_XFER_COUNT(xlen), data);
+
+			/* The START condition is sent only once. */
+			start &= ~MXS_I2C_CTRL0_PRE_SEND_START;
+
+			/* Wait for the end of the transfer. */
+			ret = mxs_i2c_pio_wait_xfer_end(i2c);
+			if (ret) {
+				dev_err(i2c->dev,
+					"PIO: Failed to finish WRITE cmd!\n");
+				break;
+			}
+
+			/* Check NAK here. */
+			ret = readl(i2c->regs + MXS_I2C_STAT) &
+				    MXS_I2C_STAT_GOT_A_NAK;
+			if (ret) {
+				ret = -ENXIO;
+				goto cleanup;
+			}
 		}
 	}
 
-	ret = mxs_i2c_pio_wait_cplt(i2c, flags & MXS_I2C_CTRL0_POST_SEND_STOP);
-	if (ret)
-		return ret;
-
 	/* make sure we capture any occurred error into cmd_err */
-	mxs_i2c_pio_check_error_state(i2c);
+	ret = mxs_i2c_pio_check_error_state(i2c);
 
 cleanup:
 	/* Clear any dangling IRQs and re-enable interrupts. */
 	writel(MXS_I2C_IRQ_MASK, i2c->regs + MXS_I2C_CTRL1_CLR);
 	writel(MXS_I2C_IRQ_MASK << 8, i2c->regs + MXS_I2C_CTRL1_SET);
 
-	return 0;
+	/* Clear the PIO_MODE on i.MX23 */
+	if (i2c->dev_type == MXS_I2C_V1)
+		writel(MXS_I2C_CTRL0_PIO_MODE, i2c->regs + MXS_I2C_CTRL0_CLR);
+
+	return ret;
 }
 
 /*
@@ -478,6 +564,7 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 	struct mxs_i2c_dev *i2c = i2c_get_adapdata(adap);
 	int ret;
 	int flags;
+	int use_pio = 0;
 
 	flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
 
@@ -488,18 +575,23 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 		return -EINVAL;
 
 	/*
-	 * The current boundary to select between PIO/DMA transfer method
-	 * is set to 8 bytes, transfers shorter than 8 bytes are transfered
-	 * using PIO mode while longer transfers use DMA. The 8 byte border is
-	 * based on this empirical measurement and a lot of previous frobbing.
+	 * The MX28 I2C IP block can only do PIO READ for transfer of to up
+	 * 4 bytes of length. The write transfer is not limited as it can use
+	 * clock stretching to avoid FIFO underruns.
 	 */
+	if ((msg->flags & I2C_M_RD) && (msg->len <= 4))
+		use_pio = 1;
+	if (!(msg->flags & I2C_M_RD) && (msg->len < 7))
+		use_pio = 1;
+
 	i2c->cmd_err = 0;
-	if (msg->len < 8) {
+	if (use_pio) {
 		ret = mxs_i2c_pio_setup_xfer(adap, msg, flags);
-		if (ret)
+		/* No need to reset the block if NAK was received. */
+		if (ret && (ret != -ENXIO))
 			mxs_i2c_reset(i2c);
 	} else {
-		INIT_COMPLETION(i2c->cmd_complete);
+		reinit_completion(&i2c->cmd_complete);
 		ret = mxs_i2c_dma_setup_xfer(adap, msg, flags);
 		if (ret)
 			return ret;
@@ -508,9 +600,11 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 						msecs_to_jiffies(1000));
 		if (ret == 0)
 			goto timeout;
+
+		ret = i2c->cmd_err;
 	}
 
-	if (i2c->cmd_err == -ENXIO) {
+	if (ret == -ENXIO) {
 		/*
 		 * If the transfer fails with a NAK from the slave the
 		 * controller halts until it gets told to return to idle state.
@@ -519,7 +613,19 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 		       i2c->regs + MXS_I2C_CTRL1_SET);
 	}
 
-	ret = i2c->cmd_err;
+	/*
+	 * WARNING!
+	 * The i.MX23 is strange. After each and every operation, it's I2C IP
+	 * block must be reset, otherwise the IP block will misbehave. This can
+	 * be observed on the bus by the block sending out one single byte onto
+	 * the bus. In case such an error happens, bit 27 will be set in the
+	 * DEBUG0 register. This bit is not documented in the i.MX23 datasheet
+	 * and is marked as "TBD" instead. To reset this bit to a correct state,
+	 * reset the whole block. Since the block reset does not take long, do
+	 * reset the block after every transfer to play safe.
+	 */
+	if (i2c->dev_type == MXS_I2C_V1)
+		mxs_i2c_reset(i2c);
 
 	dev_dbg(i2c->dev, "Done with err=%d\n", ret);
 
@@ -528,7 +634,10 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 timeout:
 	dev_dbg(i2c->dev, "Timeout!\n");
 	mxs_i2c_dma_finish(i2c);
-	mxs_i2c_reset(i2c);
+	ret = mxs_i2c_reset(i2c);
+	if (ret)
+		return ret;
+
 	return -ETIMEDOUT;
 }
 
@@ -578,41 +687,79 @@ static const struct i2c_algorithm mxs_i2c_algo = {
 	.functionality = mxs_i2c_func,
 };
 
-static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, int speed)
+static void mxs_i2c_derive_timing(struct mxs_i2c_dev *i2c, uint32_t speed)
 {
-	/* The I2C block clock run at 24MHz */
+	/* The I2C block clock runs at 24MHz */
 	const uint32_t clk = 24000000;
-	uint32_t base;
+	uint32_t divider;
 	uint16_t high_count, low_count, rcv_count, xmit_count;
+	uint32_t bus_free, leadin;
 	struct device *dev = i2c->dev;
 
-	if (speed > 540000) {
-		dev_warn(dev, "Speed too high (%d Hz), using 540 kHz\n", speed);
-		speed = 540000;
-	} else if (speed < 12000) {
-		dev_warn(dev, "Speed too low (%d Hz), using 12 kHz\n", speed);
-		speed = 12000;
+	divider = DIV_ROUND_UP(clk, speed);
+
+	if (divider < 25) {
+		/*
+		 * limit the divider, so that min(low_count, high_count)
+		 * is >= 1
+		 */
+		divider = 25;
+		dev_warn(dev,
+			"Speed too high (%u.%03u kHz), using %u.%03u kHz\n",
+			speed / 1000, speed % 1000,
+			clk / divider / 1000, clk / divider % 1000);
+	} else if (divider > 1897) {
+		/*
+		 * limit the divider, so that max(low_count, high_count)
+		 * cannot exceed 1023
+		 */
+		divider = 1897;
+		dev_warn(dev,
+			"Speed too low (%u.%03u kHz), using %u.%03u kHz\n",
+			speed / 1000, speed % 1000,
+			clk / divider / 1000, clk / divider % 1000);
 	}
 
 	/*
-	 * The timing derivation algorithm. There is no documentation for this
-	 * algorithm available, it was derived by using the scope and fiddling
-	 * with constants until the result observed on the scope was good enough
-	 * for 20kHz, 50kHz, 100kHz, 200kHz, 300kHz and 400kHz. It should be
-	 * possible to assume the algorithm works for other frequencies as well.
+	 * The I2C spec specifies the following timing data:
+	 *                          standard mode  fast mode Bitfield name
+	 * tLOW (SCL LOW period)     4700 ns        1300 ns
+	 * tHIGH (SCL HIGH period)   4000 ns         600 ns
+	 * tSU;DAT (data setup time)  250 ns         100 ns
+	 * tHD;STA (START hold time) 4000 ns         600 ns
+	 * tBUF (bus free time)      4700 ns        1300 ns
 	 *
-	 * Note it was necessary to cap the frequency on both ends as it's not
-	 * possible to configure completely arbitrary frequency for the I2C bus
-	 * clock.
+	 * The hardware (of the i.MX28 at least) seems to add 2 additional
+	 * clock cycles to the low_count and 7 cycles to the high_count.
+	 * This is compensated for by subtracting the respective constants
+	 * from the values written to the timing registers.
 	 */
-	base = ((clk / speed) - 38) / 2;
-	high_count = base + 3;
-	low_count = base - 3;
-	rcv_count = (high_count * 3) / 4;
-	xmit_count = low_count / 4;
+	if (speed > 100000) {
+		/* fast mode */
+		low_count = DIV_ROUND_CLOSEST(divider * 13, (13 + 6));
+		high_count = DIV_ROUND_CLOSEST(divider * 6, (13 + 6));
+		leadin = DIV_ROUND_UP(600 * (clk / 1000000), 1000);
+		bus_free = DIV_ROUND_UP(1300 * (clk / 1000000), 1000);
+	} else {
+		/* normal mode */
+		low_count = DIV_ROUND_CLOSEST(divider * 47, (47 + 40));
+		high_count = DIV_ROUND_CLOSEST(divider * 40, (47 + 40));
+		leadin = DIV_ROUND_UP(4700 * (clk / 1000000), 1000);
+		bus_free = DIV_ROUND_UP(4700 * (clk / 1000000), 1000);
+	}
+	rcv_count = high_count * 3 / 8;
+	xmit_count = low_count * 3 / 8;
 
+	dev_dbg(dev,
+		"speed=%u(actual %u) divider=%u low=%u high=%u xmit=%u rcv=%u leadin=%u bus_free=%u\n",
+		speed, clk / divider, divider, low_count, high_count,
+		xmit_count, rcv_count, leadin, bus_free);
+
+	low_count -= 2;
+	high_count -= 7;
 	i2c->timing0 = (high_count << 16) | rcv_count;
 	i2c->timing1 = (low_count << 16) | xmit_count;
+	i2c->timing2 = (bus_free << 16 | leadin);
 }
 
 static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
@@ -633,24 +780,44 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
 	return 0;
 }
 
+static struct platform_device_id mxs_i2c_devtype[] = {
+	{
+		.name = "imx23-i2c",
+		.driver_data = MXS_I2C_V1,
+	}, {
+		.name = "imx28-i2c",
+		.driver_data = MXS_I2C_V2,
+	}, { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, mxs_i2c_devtype);
+
+static const struct of_device_id mxs_i2c_dt_ids[] = {
+	{ .compatible = "fsl,imx23-i2c", .data = &mxs_i2c_devtype[0], },
+	{ .compatible = "fsl,imx28-i2c", .data = &mxs_i2c_devtype[1], },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxs_i2c_dt_ids);
+
 static int mxs_i2c_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id =
+				of_match_device(mxs_i2c_dt_ids, &pdev->dev);
 	struct device *dev = &pdev->dev;
 	struct mxs_i2c_dev *i2c;
 	struct i2c_adapter *adap;
-	struct pinctrl *pinctrl;
 	struct resource *res;
 	resource_size_t res_size;
 	int err, irq;
 
-	pinctrl = devm_pinctrl_get_select_default(dev);
-	if (IS_ERR(pinctrl))
-		return PTR_ERR(pinctrl);
-
 	i2c = devm_kzalloc(dev, sizeof(struct mxs_i2c_dev), GFP_KERNEL);
 	if (!i2c)
 		return -ENOMEM;
 
+	if (of_id) {
+		const struct platform_device_id *device_id = of_id->data;
+		i2c->dev_type = device_id->driver_data;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
 
@@ -689,7 +856,9 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, i2c);
 
 	/* Do reset to enforce correct startup after pinmuxing */
-	mxs_i2c_reset(i2c);
+	err = mxs_i2c_reset(i2c);
+	if (err)
+		return err;
 
 	adap = &i2c->adapter;
 	strlcpy(adap->name, "MXS I2C adapter", sizeof(adap->name));
@@ -707,8 +876,6 @@ static int mxs_i2c_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	of_i2c_register_devices(adap);
-
 	return 0;
 }
 
@@ -726,24 +893,19 @@ static int mxs_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static const struct of_device_id mxs_i2c_dt_ids[] = {
-	{ .compatible = "fsl,imx28-i2c", },
-	{ /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, mxs_i2c_dt_ids);
-
 static struct platform_driver mxs_i2c_driver = {
 	.driver = {
 		   .name = DRIVER_NAME,
 		   .owner = THIS_MODULE,
 		   .of_match_table = mxs_i2c_dt_ids,
 		   },
+	.probe = mxs_i2c_probe,
 	.remove = mxs_i2c_remove,
 };
 
 static int __init mxs_i2c_init(void)
 {
-	return platform_driver_probe(&mxs_i2c_driver, mxs_i2c_probe);
+	return platform_driver_register(&mxs_i2c_driver);
 }
 subsys_initcall(mxs_i2c_init);
 
@@ -753,6 +915,7 @@ static void __exit mxs_i2c_exit(void)
 }
 module_exit(mxs_i2c_exit);
 
+MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
 MODULE_AUTHOR("Wolfram Sang <w.sang@pengutronix.de>");
 MODULE_DESCRIPTION("MXS I2C Bus Driver");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 650293f..8bf9ac0 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -15,7 +15,6 @@
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/amba/bus.h>
-#include <linux/atomic.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
@@ -25,7 +24,6 @@
 #include <linux/pm_runtime.h>
 #include <linux/platform_data/i2c-nomadik.h>
 #include <linux/of.h>
-#include <linux/of_i2c.h>
 #include <linux/pinctrl/consumer.h>
 
 #define DRIVER_NAME "nmk-i2c"
@@ -106,6 +104,16 @@
 /* maximum threshold value */
 #define MAX_I2C_FIFO_THRESHOLD	15
 
+/**
+ * struct i2c_vendor_data - per-vendor variations
+ * @has_mtdws: variant has the MTDWS bit
+ * @fifodepth: variant FIFO depth
+ */
+struct i2c_vendor_data {
+	bool has_mtdws;
+	u32 fifodepth;
+};
+
 enum i2c_status {
 	I2C_NOP,
 	I2C_ON_GOING,
@@ -138,6 +146,7 @@ struct i2c_nmk_client {
 
 /**
  * struct nmk_i2c_dev - private data structure of the controller.
+ * @vendor: vendor data for this variant.
  * @adev: parent amba device.
  * @adap: corresponding I2C adapter.
  * @irq: interrupt line for the controller.
@@ -148,13 +157,10 @@ struct i2c_nmk_client {
  * @stop: stop condition.
  * @xfer_complete: acknowledge completion for a I2C message.
  * @result: controller propogated result.
- * @pinctrl: pinctrl handle.
- * @pins_default: default state for the pins.
- * @pins_idle: idle state for the pins.
- * @pins_sleep: sleep state for the pins.
  * @busy: Busy doing transfer.
  */
 struct nmk_i2c_dev {
+	struct i2c_vendor_data		*vendor;
 	struct amba_device		*adev;
 	struct i2c_adapter		adap;
 	int				irq;
@@ -165,11 +171,6 @@ struct nmk_i2c_dev {
 	int				stop;
 	struct completion		xfer_complete;
 	int				result;
-	/* Three pin states - default, idle & sleep */
-	struct pinctrl			*pinctrl;
-	struct pinctrl_state		*pins_default;
-	struct pinctrl_state		*pins_idle;
-	struct pinctrl_state		*pins_sleep;
 	bool				busy;
 };
 
@@ -431,7 +432,7 @@ static int read_i2c(struct nmk_i2c_dev *dev, u16 flags)
 	irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
 			I2C_IT_MAL | I2C_IT_BERR);
 
-	if (dev->stop)
+	if (dev->stop || !dev->vendor->has_mtdws)
 		irq_mask |= I2C_IT_MTD;
 	else
 		irq_mask |= I2C_IT_MTDWS;
@@ -511,7 +512,7 @@ static int write_i2c(struct nmk_i2c_dev *dev, u16 flags)
 	 * set the MTDWS bit (Master Transaction Done Without Stop)
 	 * to start repeated start operation
 	 */
-	if (dev->stop)
+	if (dev->stop || !dev->vendor->has_mtdws)
 		irq_mask |= I2C_IT_MTD;
 	else
 		irq_mask |= I2C_IT_MTDWS;
@@ -645,13 +646,7 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
 	}
 
 	/* Optionaly enable pins to be muxed in and configured */
-	if (!IS_ERR(dev->pins_default)) {
-		status = pinctrl_select_state(dev->pinctrl,
-				dev->pins_default);
-		if (status)
-			dev_err(&dev->adev->dev,
-				"could not set default pins\n");
-	}
+	pinctrl_pm_select_default_state(&dev->adev->dev);
 
 	status = init_hw(dev);
 	if (status)
@@ -681,13 +676,7 @@ out:
 	clk_disable_unprepare(dev->clk);
 out_clk:
 	/* Optionally let pins go into idle state */
-	if (!IS_ERR(dev->pins_idle)) {
-		status = pinctrl_select_state(dev->pinctrl,
-				dev->pins_idle);
-		if (status)
-			dev_err(&dev->adev->dev,
-				"could not set pins to idle state\n");
-	}
+	pinctrl_pm_select_idle_state(&dev->adev->dev);
 
 	pm_runtime_put_sync(&dev->adev->dev);
 
@@ -882,41 +871,22 @@ static int nmk_i2c_suspend(struct device *dev)
 {
 	struct amba_device *adev = to_amba_device(dev);
 	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-	int ret;
 
 	if (nmk_i2c->busy)
 		return -EBUSY;
 
-	if (!IS_ERR(nmk_i2c->pins_sleep)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_sleep);
-		if (ret)
-			dev_err(dev, "could not set pins to sleep state\n");
-	}
+	pinctrl_pm_select_sleep_state(dev);
 
 	return 0;
 }
 
 static int nmk_i2c_resume(struct device *dev)
 {
-	struct amba_device *adev = to_amba_device(dev);
-	struct nmk_i2c_dev *nmk_i2c = amba_get_drvdata(adev);
-	int ret;
-
 	/* First go to the default state */
-	if (!IS_ERR(nmk_i2c->pins_default)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_default);
-		if (ret)
-			dev_err(dev, "could not set pins to default state\n");
-	}
+	pinctrl_pm_select_default_state(dev);
 	/* Then let's idle the pins until the next transfer happens */
-	if (!IS_ERR(nmk_i2c->pins_idle)) {
-		ret = pinctrl_select_state(nmk_i2c->pinctrl,
-				nmk_i2c->pins_idle);
-		if (ret)
-			dev_err(dev, "could not set pins to idle state\n");
-	}
+	pinctrl_pm_select_idle_state(dev);
+
 	return 0;
 }
 #else
@@ -969,15 +939,15 @@ static void nmk_i2c_of_probe(struct device_node *np,
 		pdata->sm = I2C_FREQ_MODE_FAST;
 }
 
-static atomic_t adapter_id = ATOMIC_INIT(0);
-
 static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 {
 	int ret = 0;
-	struct nmk_i2c_controller *pdata = adev->dev.platform_data;
+	struct nmk_i2c_controller *pdata = dev_get_platdata(&adev->dev);
 	struct device_node *np = adev->dev.of_node;
 	struct nmk_i2c_dev	*dev;
 	struct i2c_adapter *adap;
+	struct i2c_vendor_data *vendor = id->data;
+	u32 max_fifo_threshold = (vendor->fifodepth / 2) - 1;
 
 	if (!pdata) {
 		if (np) {
@@ -994,49 +964,33 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 			pdata = &u8500_i2c;
 	}
 
+	if (pdata->tft > max_fifo_threshold) {
+		dev_warn(&adev->dev, "requested TX FIFO threshold %u, adjusted down to %u\n",
+			pdata->tft, max_fifo_threshold);
+		pdata->tft = max_fifo_threshold;
+	}
+
+	if (pdata->rft > max_fifo_threshold) {
+		dev_warn(&adev->dev, "requested RX FIFO threshold %u, adjusted down to %u\n",
+			pdata->rft, max_fifo_threshold);
+		pdata->rft = max_fifo_threshold;
+	}
+
 	dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
 	if (!dev) {
 		dev_err(&adev->dev, "cannot allocate memory\n");
 		ret = -ENOMEM;
 		goto err_no_mem;
 	}
+	dev->vendor = vendor;
 	dev->busy = false;
 	dev->adev = adev;
 	amba_set_drvdata(adev, dev);
 
-	dev->pinctrl = devm_pinctrl_get(&adev->dev);
-	if (IS_ERR(dev->pinctrl)) {
-		ret = PTR_ERR(dev->pinctrl);
-		goto err_pinctrl;
-	}
-
-	dev->pins_default = pinctrl_lookup_state(dev->pinctrl,
-						 PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(dev->pins_default)) {
-		dev_err(&adev->dev, "could not get default pinstate\n");
-	} else {
-		ret = pinctrl_select_state(dev->pinctrl,
-					   dev->pins_default);
-		if (ret)
-			dev_dbg(&adev->dev, "could not set default pinstate\n");
-	}
-
-	dev->pins_idle = pinctrl_lookup_state(dev->pinctrl,
-					      PINCTRL_STATE_IDLE);
-	if (IS_ERR(dev->pins_idle)) {
-		dev_dbg(&adev->dev, "could not get idle pinstate\n");
-	} else {
-		/* If possible, let's go to idle until the first transfer */
-		ret = pinctrl_select_state(dev->pinctrl,
-					   dev->pins_idle);
-		if (ret)
-			dev_dbg(&adev->dev, "could not set idle pinstate\n");
-	}
-
-	dev->pins_sleep = pinctrl_lookup_state(dev->pinctrl,
-					       PINCTRL_STATE_SLEEP);
-	if (IS_ERR(dev->pins_sleep))
-		dev_dbg(&adev->dev, "could not get sleep pinstate\n");
+	/* Select default pin state */
+	pinctrl_pm_select_default_state(&adev->dev);
+	/* If possible, let's go to idle until the first transfer */
+	pinctrl_pm_select_idle_state(&adev->dev);
 
 	dev->virtbase = ioremap(adev->res.start, resource_size(&adev->res));
 	if (!dev->virtbase) {
@@ -1068,10 +1022,8 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	adap->class	= I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->algo	= &nmk_i2c_algo;
 	adap->timeout	= msecs_to_jiffies(pdata->timeout);
-	adap->nr = atomic_read(&adapter_id);
 	snprintf(adap->name, sizeof(adap->name),
-		 "Nomadik I2C%d at %pR", adap->nr, &adev->res);
-	atomic_inc(&adapter_id);
+		 "Nomadik I2C at %pR", &adev->res);
 
 	/* fetch the controller configuration from machine */
 	dev->cfg.clk_freq = pdata->clk_freq;
@@ -1086,14 +1038,12 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 		 "initialize %s on virtual base %p\n",
 		 adap->name, dev->virtbase);
 
-	ret = i2c_add_numbered_adapter(adap);
+	ret = i2c_add_adapter(adap);
 	if (ret) {
 		dev_err(&adev->dev, "failed to add adapter\n");
 		goto err_add_adap;
 	}
 
-	of_i2c_register_devices(adap);
-
 	pm_runtime_put(&adev->dev);
 
 	return 0;
@@ -1106,7 +1056,6 @@ static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
 	iounmap(dev->virtbase);
  err_no_ioremap:
 	kfree(dev);
- err_pinctrl:
  err_no_mem:
 
 	return ret;
@@ -1134,14 +1083,26 @@ static int nmk_i2c_remove(struct amba_device *adev)
 	return 0;
 }
 
+static struct i2c_vendor_data vendor_stn8815 = {
+	.has_mtdws = false,
+	.fifodepth = 16, /* Guessed from TFTR/RFTR = 7 */
+};
+
+static struct i2c_vendor_data vendor_db8500 = {
+	.has_mtdws = true,
+	.fifodepth = 32, /* Guessed from TFTR/RFTR = 15 */
+};
+
 static struct amba_id nmk_i2c_ids[] = {
 	{
 		.id	= 0x00180024,
 		.mask	= 0x00ffffff,
+		.data	= &vendor_stn8815,
 	},
 	{
 		.id	= 0x00380024,
 		.mask	= 0x00ffffff,
+		.data	= &vendor_db8500,
 	},
 	{},
 };
diff --git a/drivers/i2c/busses/i2c-nuc900.c b/drivers/i2c/busses/i2c-nuc900.c
index 865ee35..36394d7 100644
--- a/drivers/i2c/busses/i2c-nuc900.c
+++ b/drivers/i2c/busses/i2c-nuc900.c
@@ -525,7 +525,7 @@ static int nuc900_i2c_probe(struct platform_device *pdev)
 	struct resource *res;
 	int ret;
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 	if (!pdata) {
 		dev_err(&pdev->dev, "no platform data\n");
 		return -EINVAL;
diff --git a/drivers/i2c/busses/i2c-ocores.c b/drivers/i2c/busses/i2c-ocores.c
index 0e1f824..c61f37a 100644
--- a/drivers/i2c/busses/i2c-ocores.c
+++ b/drivers/i2c/busses/i2c-ocores.c
@@ -24,7 +24,6 @@
 #include <linux/i2c-ocores.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <linux/of_i2c.h>
 #include <linux/log2.h>
 
 struct ocores_i2c {
@@ -353,10 +352,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	int ret;
 	int i;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
 		return irq;
@@ -365,11 +360,12 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	if (!i2c)
 		return -ENOMEM;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	i2c->base = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(i2c->base))
 		return PTR_ERR(i2c->base);
 
-	pdata = pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 	if (pdata) {
 		i2c->reg_shift = pdata->reg_shift;
 		i2c->reg_io_width = pdata->reg_io_width;
@@ -435,8 +431,6 @@ static int ocores_i2c_probe(struct platform_device *pdev)
 	if (pdata) {
 		for (i = 0; i < pdata->num_devices; i++)
 			i2c_new_device(&i2c->adap, pdata->devices + i);
-	} else {
-		of_i2c_register_devices(&i2c->adap);
 	}
 
 	return 0;
@@ -456,7 +450,7 @@ static int ocores_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int ocores_i2c_suspend(struct device *dev)
 {
 	struct ocores_i2c *i2c = dev_get_drvdata(dev);
diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c
index 956fe32..b929ba2 100644
--- a/drivers/i2c/busses/i2c-octeon.c
+++ b/drivers/i2c/busses/i2c-octeon.c
@@ -15,7 +15,6 @@
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
 #include <linux/delay.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
@@ -599,8 +598,6 @@ static int octeon_i2c_probe(struct platform_device *pdev)
 	}
 	dev_info(i2c->dev, "version %s\n", DRV_VERSION);
 
-	of_i2c_register_devices(&i2c->adap);
-
 	return 0;
 
 out:
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index e02f9e3..90dcc2e 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -38,12 +38,10 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
 #include <linux/slab.h>
 #include <linux/i2c-omap.h>
 #include <linux/pm_runtime.h>
-#include <linux/pinctrl/consumer.h>
 
 /* I2C controller revisions */
 #define OMAP_I2C_OMAP1_REV_2		0x20
@@ -180,6 +178,8 @@ enum {
 #define I2C_OMAP_ERRATA_I207		(1 << 0)
 #define I2C_OMAP_ERRATA_I462		(1 << 1)
 
+#define OMAP_I2C_IP_V2_INTERRUPTS_MASK	0x6FFF
+
 struct omap_i2c_dev {
 	spinlock_t		lock;		/* IRQ synchronization */
 	struct device		*dev;
@@ -193,6 +193,7 @@ struct omap_i2c_dev {
 						    long latency);
 	u32			speed;		/* Speed of bus in kHz */
 	u32			flags;
+	u16			scheme;
 	u16			cmd_err;
 	u8			*buf;
 	u8			*regs;
@@ -213,8 +214,6 @@ struct omap_i2c_dev {
 	u16			syscstate;
 	u16			westate;
 	u16			errata;
-
-	struct pinctrl		*pins;
 };
 
 static const u8 reg_map_ip_v1[] = {
@@ -267,13 +266,13 @@ static const u8 reg_map_ip_v2[] = {
 static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
 				      int reg, u16 val)
 {
-	__raw_writew(val, i2c_dev->base +
+	writew_relaxed(val, i2c_dev->base +
 			(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
 static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
 {
-	return __raw_readw(i2c_dev->base +
+	return readw_relaxed(i2c_dev->base +
 				(i2c_dev->regs[reg] << i2c_dev->reg_shift));
 }
 
@@ -544,7 +543,7 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR;
 	omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w);
 
-	INIT_COMPLETION(dev->cmd_complete);
+	reinit_completion(&dev->cmd_complete);
 	dev->cmd_err = 0;
 
 	w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT;
@@ -615,11 +614,10 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap,
 	if (dev->cmd_err & OMAP_I2C_STAT_NACK) {
 		if (msg->flags & I2C_M_IGNORE_NAK)
 			return 0;
-		if (stop) {
-			w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
-			w |= OMAP_I2C_CON_STP;
-			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
-		}
+
+		w = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG);
+		w |= OMAP_I2C_CON_STP;
+		omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w);
 		return -EREMOTEIO;
 	}
 	return -EIO;
@@ -941,6 +939,9 @@ omap_i2c_isr_thread(int this_irq, void *dev_id)
 		/*
 		 * ProDB0017052: Clear ARDY bit twice
 		 */
+		if (stat & OMAP_I2C_STAT_ARDY)
+			omap_i2c_ack_stat(dev, OMAP_I2C_STAT_ARDY);
+
 		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
 					OMAP_I2C_STAT_AL)) {
 			omap_i2c_ack_stat(dev, (OMAP_I2C_STAT_RRDY |
@@ -1036,6 +1037,20 @@ static const struct i2c_algorithm omap_i2c_algo = {
 };
 
 #ifdef CONFIG_OF
+static struct omap_i2c_bus_platform_data omap2420_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_NO_FIFO |
+			OMAP_I2C_FLAG_SIMPLE_CLOCK |
+			OMAP_I2C_FLAG_16BIT_DATA_REG |
+			OMAP_I2C_FLAG_BUS_SHIFT_2,
+};
+
+static struct omap_i2c_bus_platform_data omap2430_pdata = {
+	.rev = OMAP_I2C_IP_VERSION_1,
+	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2 |
+			OMAP_I2C_FLAG_FORCE_19200_INT_CLK,
+};
+
 static struct omap_i2c_bus_platform_data omap3_pdata = {
 	.rev = OMAP_I2C_IP_VERSION_1,
 	.flags = OMAP_I2C_FLAG_BUS_SHIFT_2,
@@ -1054,6 +1069,14 @@ static const struct of_device_id omap_i2c_of_match[] = {
 		.compatible = "ti,omap3-i2c",
 		.data = &omap3_pdata,
 	},
+	{
+		.compatible = "ti,omap2430-i2c",
+		.data = &omap2430_pdata,
+	},
+	{
+		.compatible = "ti,omap2420-i2c",
+		.data = &omap2420_pdata,
+	},
 	{ },
 };
 MODULE_DEVICE_TABLE(of, omap_i2c_of_match);
@@ -1076,20 +1099,13 @@ omap_i2c_probe(struct platform_device *pdev)
 	struct i2c_adapter	*adap;
 	struct resource		*mem;
 	const struct omap_i2c_bus_platform_data *pdata =
-		pdev->dev.platform_data;
+		dev_get_platdata(&pdev->dev);
 	struct device_node	*node = pdev->dev.of_node;
 	const struct of_device_id *match;
 	int irq;
 	int r;
 	u32 rev;
-	u16 minor, major, scheme;
-
-	/* NOTE: driver uses the static register mapping */
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!mem) {
-		dev_err(&pdev->dev, "no mem resource?\n");
-		return -ENODEV;
-	}
+	u16 minor, major;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
@@ -1103,6 +1119,7 @@ omap_i2c_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	dev->base = devm_ioremap_resource(&pdev->dev, mem);
 	if (IS_ERR(dev->base))
 		return PTR_ERR(dev->base);
@@ -1123,16 +1140,6 @@ omap_i2c_probe(struct platform_device *pdev)
 		dev->set_mpu_wkup_lat = pdata->set_mpu_wkup_lat;
 	}
 
-	dev->pins = devm_pinctrl_get_select_default(&pdev->dev);
-	if (IS_ERR(dev->pins)) {
-		if (PTR_ERR(dev->pins) == -EPROBE_DEFER)
-			return -EPROBE_DEFER;
-
-		dev_warn(&pdev->dev, "did not get pins for i2c error: %li\n",
-			 PTR_ERR(dev->pins));
-		dev->pins = NULL;
-	}
-
 	dev->dev = &pdev->dev;
 	dev->irq = irq;
 
@@ -1155,12 +1162,12 @@ omap_i2c_probe(struct platform_device *pdev)
 	 * Read the Rev hi bit-[15:14] ie scheme this is 1 indicates ver2.
 	 * On omap1/3/2 Offset 4 is IE Reg the bit [15:14] is 0 at reset.
 	 * Also since the omap_i2c_read_reg uses reg_map_ip_* a
-	 * raw_readw is done.
+	 * readw_relaxed is done.
 	 */
-	rev = __raw_readw(dev->base + 0x04);
+	rev = readw_relaxed(dev->base + 0x04);
 
-	scheme = OMAP_I2C_SCHEME(rev);
-	switch (scheme) {
+	dev->scheme = OMAP_I2C_SCHEME(rev);
+	switch (dev->scheme) {
 	case OMAP_I2C_SCHEME_0:
 		dev->regs = (u8 *)reg_map_ip_v1;
 		dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG);
@@ -1248,8 +1255,6 @@ omap_i2c_probe(struct platform_device *pdev)
 	dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", adap->nr,
 		 major, minor, dev->speed);
 
-	of_i2c_register_devices(adap);
-
 	pm_runtime_mark_last_busy(dev->dev);
 	pm_runtime_put_autosuspend(dev->dev);
 
@@ -1289,7 +1294,11 @@ static int omap_i2c_runtime_suspend(struct device *dev)
 
 	_dev->iestate = omap_i2c_read_reg(_dev, OMAP_I2C_IE_REG);
 
-	omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+	if (_dev->scheme == OMAP_I2C_SCHEME_0)
+		omap_i2c_write_reg(_dev, OMAP_I2C_IE_REG, 0);
+	else
+		omap_i2c_write_reg(_dev, OMAP_I2C_IP_V2_IRQENABLE_CLR,
+				   OMAP_I2C_IP_V2_INTERRUPTS_MASK);
 
 	if (_dev->rev < OMAP_I2C_OMAP1_REV_2) {
 		omap_i2c_read_reg(_dev, OMAP_I2C_IV_REG); /* Read clears */
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index aa00df1..39e2755 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -136,7 +136,7 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 	struct i2c_pca_pf_data *i2c;
 	struct resource *res;
 	struct i2c_pca9564_pf_platform_data *platform_data =
-				pdev->dev.platform_data;
+				dev_get_platdata(&pdev->dev);
 	int ret = 0;
 	int irq;
 
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 39ab78c..a028617 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
 	Intel PIIX4, 440MX
 	Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
 	ATI IXP200, IXP300, IXP400, SB600, SB700/SP5100, SB800
-	AMD Hudson-2
+	AMD Hudson-2, CZ
 	SMSC Victory66
 
    Note: we assume there can only be one device, with one or more
@@ -231,11 +231,11 @@ static int piix4_setup(struct pci_dev *PIIX4_dev,
 }
 
 static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
-			     const struct pci_device_id *id)
+			     const struct pci_device_id *id, u8 aux)
 {
 	unsigned short piix4_smba;
 	unsigned short smba_idx = 0xcd6;
-	u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
+	u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en;
 
 	/* SB800 and later SMBus does not support forcing address */
 	if (force || force_addr) {
@@ -245,6 +245,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 	}
 
 	/* Determine the address of the SMBus areas */
+	smb_en = (aux) ? 0x28 : 0x2c;
+
 	if (!request_region(smba_idx, 2, "smba_idx")) {
 		dev_err(&PIIX4_dev->dev, "SMBus base address index region "
 			"0x%x already in use!\n", smba_idx);
@@ -272,6 +274,13 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
 		return -EBUSY;
 	}
 
+	/* Aux SMBus does not support IRQ information */
+	if (aux) {
+		dev_info(&PIIX4_dev->dev,
+			 "SMBus Host Controller at 0x%x\n", piix4_smba);
+		return piix4_smba;
+	}
+
 	/* Request the SMBus I2C bus config region */
 	if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
 		dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
@@ -522,6 +531,7 @@ static DEFINE_PCI_DEVICE_TABLE(piix4_ids) = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x790b) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
 		     PCI_DEVICE_ID_SERVERWORKS_OSB4) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
@@ -596,7 +606,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	     dev->revision >= 0x40) ||
 	    dev->vendor == PCI_VENDOR_ID_AMD)
 		/* base address location etc changed in SB800 */
-		retval = piix4_setup_sb800(dev, id);
+		retval = piix4_setup_sb800(dev, id, 0);
 	else
 		retval = piix4_setup(dev, id);
 
@@ -610,17 +620,29 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		return retval;
 
 	/* Check for auxiliary SMBus on some AMD chipsets */
+	retval = -ENODEV;
+
 	if (dev->vendor == PCI_VENDOR_ID_ATI &&
-	    dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
-	    dev->revision < 0x40) {
-		retval = piix4_setup_aux(dev, id, 0x58);
-		if (retval > 0) {
-			/* Try to add the aux adapter if it exists,
-			 * piix4_add_adapter will clean up if this fails */
-			piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+	    dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) {
+		if (dev->revision < 0x40) {
+			retval = piix4_setup_aux(dev, id, 0x58);
+		} else {
+			/* SB800 added aux bus too */
+			retval = piix4_setup_sb800(dev, id, 1);
 		}
 	}
 
+	if (dev->vendor == PCI_VENDOR_ID_AMD &&
+	    dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
+		retval = piix4_setup_sb800(dev, id, 1);
+	}
+
+	if (retval > 0) {
+		/* Try to add the aux adapter if it exists,
+		 * piix4_add_adapter will clean up if this fails */
+		piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5f39c6d..c9a352f 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -23,7 +23,7 @@
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
+#include <linux/of.h>
 
 #define I2C_PNX_TIMEOUT_DEFAULT		10 /* msec */
 #define I2C_PNX_SPEED_KHZ_DEFAULT	100
@@ -595,7 +595,7 @@ static struct i2c_algorithm pnx_algorithm = {
 	.functionality = i2c_pnx_func,
 };
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int i2c_pnx_controller_suspend(struct device *dev)
 {
 	struct i2c_pnx_algo_data *alg_data = dev_get_drvdata(dev);
@@ -727,7 +727,8 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 	alg_data->irq = platform_get_irq(pdev, 0);
 	if (alg_data->irq < 0) {
 		dev_err(&pdev->dev, "Failed to get IRQ from platform resource\n");
-		goto out_irq;
+		ret = alg_data->irq;
+		goto out_clock;
 	}
 	ret = request_irq(alg_data->irq, i2c_pnx_interrupt,
 			0, pdev->name, alg_data);
@@ -741,8 +742,6 @@ static int i2c_pnx_probe(struct platform_device *pdev)
 		goto out_irq;
 	}
 
-	of_i2c_register_devices(&alg_data->adapter);
-
 	dev_dbg(&pdev->dev, "%s: Master at %#8x, irq %d.\n",
 		alg_data->adapter.name, res->start, alg_data->irq);
 
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 8dc90da..8c87f4a 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -27,6 +27,7 @@
 #include <linux/init.h>
 #include <linux/device.h>
 #include <linux/platform_device.h>
+#include <linux/of_irq.h>
 #include <asm/prom.h>
 #include <asm/pmac_low_i2c.h>
 
@@ -398,7 +399,7 @@ static void i2c_powermac_register_devices(struct i2c_adapter *adap,
 
 static int i2c_powermac_probe(struct platform_device *dev)
 {
-	struct pmac_i2c_bus *bus = dev->dev.platform_data;
+	struct pmac_i2c_bus *bus = dev_get_platdata(&dev->dev);
 	struct device_node *parent = NULL;
 	struct i2c_adapter *adapter;
 	const char *basename;
@@ -440,22 +441,24 @@ static int i2c_powermac_probe(struct platform_device *dev)
 	adapter->algo = &i2c_powermac_algorithm;
 	i2c_set_adapdata(adapter, bus);
 	adapter->dev.parent = &dev->dev;
-	adapter->dev.of_node = dev->dev.of_node;
+
+	/* Clear of_node to skip automatic registration of i2c child nodes */
+	adapter->dev.of_node = NULL;
 	rc = i2c_add_adapter(adapter);
 	if (rc) {
 		printk(KERN_ERR "i2c-powermac: Adapter %s registration "
 		       "failed\n", adapter->name);
 		memset(adapter, 0, sizeof(*adapter));
+		return rc;
 	}
 
 	printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
 
-	/* Cannot use of_i2c_register_devices() due to Apple device-tree
-	 * funkyness
-	 */
+	/* Use custom child registration due to Apple device-tree funkyness */
+	adapter->dev.of_node = dev->dev.of_node;
 	i2c_powermac_register_devices(adapter, bus);
 
-	return rc;
+	return 0;
 }
 
 static struct platform_driver i2c_powermac_driver = {
diff --git a/drivers/i2c/busses/i2c-puv3.c b/drivers/i2c/busses/i2c-puv3.c
index 37a84c8..ac80199 100644
--- a/drivers/i2c/busses/i2c-puv3.c
+++ b/drivers/i2c/busses/i2c-puv3.c
@@ -245,7 +245,7 @@ static int puv3_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int puv3_i2c_suspend(struct device *dev)
 {
 	int poll_count;
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index ea6d45d..bbe6dfb 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -31,7 +31,6 @@
 #include <linux/i2c-pxa.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_i2c.h>
 #include <linux/platform_device.h>
 #include <linux/err.h>
 #include <linux/clk.h>
@@ -110,6 +109,8 @@ MODULE_DEVICE_TABLE(platform, i2c_pxa_id_table);
 #define ICR_SADIE	(1 << 13)	   /* slave address detected int enable */
 #define ICR_UR		(1 << 14)	   /* unit reset */
 #define ICR_FM		(1 << 15)	   /* fast mode */
+#define ICR_HS		(1 << 16)	   /* High Speed mode */
+#define ICR_GPIOEN	(1 << 19)	   /* enable GPIO mode for SCL in HS */
 
 #define ISR_RWM		(1 << 0)	   /* read/write mode */
 #define ISR_ACKNAK	(1 << 1)	   /* ack/nak status */
@@ -155,6 +156,10 @@ struct pxa_i2c {
 	int			irq;
 	unsigned int		use_pio :1;
 	unsigned int		fast_mode :1;
+	unsigned int		high_mode:1;
+	unsigned char		master_code;
+	unsigned long		rate;
+	bool			highmode_enter;
 };
 
 #define _IBMR(i2c)	((i2c)->reg_ibmr)
@@ -459,6 +464,7 @@ static void i2c_pxa_reset(struct pxa_i2c *i2c)
 
 	/* set control register values */
 	writel(I2C_ICR_INIT | (i2c->fast_mode ? ICR_FM : 0), _ICR(i2c));
+	writel(readl(_ICR(i2c)) | (i2c->high_mode ? ICR_HS : 0), _ICR(i2c));
 
 #ifdef CONFIG_I2C_PXA_SLAVE
 	dev_info(&i2c->adap.dev, "Enabling slave mode\n");
@@ -680,6 +686,34 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
 	return 0;
 }
 
+/*
+ * PXA I2C send master code
+ * 1. Load master code to IDBR and send it.
+ *    Note for HS mode, set ICR [GPIOEN].
+ * 2. Wait until win arbitration.
+ */
+static int i2c_pxa_send_mastercode(struct pxa_i2c *i2c)
+{
+	u32 icr;
+	long timeout;
+
+	spin_lock_irq(&i2c->lock);
+	i2c->highmode_enter = true;
+	writel(i2c->master_code, _IDBR(i2c));
+
+	icr = readl(_ICR(i2c)) & ~(ICR_STOP | ICR_ALDIE);
+	icr |= ICR_GPIOEN | ICR_START | ICR_TB | ICR_ITEIE;
+	writel(icr, _ICR(i2c));
+
+	spin_unlock_irq(&i2c->lock);
+	timeout = wait_event_timeout(i2c->wait,
+			i2c->highmode_enter == false, HZ * 1);
+
+	i2c->highmode_enter = false;
+
+	return (timeout == 0) ? I2C_RETRY : 0;
+}
+
 static int i2c_pxa_do_pio_xfer(struct pxa_i2c *i2c,
 			       struct i2c_msg *msg, int num)
 {
@@ -743,6 +777,14 @@ static int i2c_pxa_do_xfer(struct pxa_i2c *i2c, struct i2c_msg *msg, int num)
 		goto out;
 	}
 
+	if (i2c->high_mode) {
+		ret = i2c_pxa_send_mastercode(i2c);
+		if (ret) {
+			dev_err(&i2c->adap.dev, "i2c_pxa_send_mastercode timeout\n");
+			goto out;
+			}
+	}
+
 	spin_lock_irq(&i2c->lock);
 
 	i2c->msg = msg;
@@ -990,11 +1032,14 @@ static irqreturn_t i2c_pxa_handler(int this_irq, void *dev_id)
 			i2c_pxa_slave_txempty(i2c, isr);
 		if (isr & ISR_IRF)
 			i2c_pxa_slave_rxfull(i2c, isr);
-	} else if (i2c->msg) {
+	} else if (i2c->msg && (!i2c->highmode_enter)) {
 		if (isr & ISR_ITE)
 			i2c_pxa_irq_txempty(i2c, isr);
 		if (isr & ISR_IRF)
 			i2c_pxa_irq_rxfull(i2c, isr);
+	} else if ((isr & ISR_ITE) && i2c->highmode_enter) {
+		i2c->highmode_enter = false;
+		wake_up(&i2c->wait);
 	} else {
 		i2c_pxa_scream_blue_murder(i2c, "spurious irq");
 	}
@@ -1072,20 +1117,25 @@ static int i2c_pxa_probe_pdata(struct platform_device *pdev,
 			       struct pxa_i2c *i2c,
 			       enum pxa_i2c_types *i2c_types)
 {
-	struct i2c_pxa_platform_data *plat = pdev->dev.platform_data;
+	struct i2c_pxa_platform_data *plat = dev_get_platdata(&pdev->dev);
 	const struct platform_device_id *id = platform_get_device_id(pdev);
 
 	*i2c_types = id->driver_data;
 	if (plat) {
 		i2c->use_pio = plat->use_pio;
 		i2c->fast_mode = plat->fast_mode;
+		i2c->high_mode = plat->high_mode;
+		i2c->master_code = plat->master_code;
+		if (!i2c->master_code)
+			i2c->master_code = 0xe;
+		i2c->rate = plat->rate;
 	}
 	return 0;
 }
 
 static int i2c_pxa_probe(struct platform_device *dev)
 {
-	struct i2c_pxa_platform_data *plat = dev->dev.platform_data;
+	struct i2c_pxa_platform_data *plat = dev_get_platdata(&dev->dev);
 	enum pxa_i2c_types i2c_type;
 	struct pxa_i2c *i2c;
 	struct resource *res = NULL;
@@ -1151,6 +1201,7 @@ static int i2c_pxa_probe(struct platform_device *dev)
 	i2c->irq = irq;
 
 	i2c->slave_addr = I2C_PXA_SLAVE_ADDR;
+	i2c->highmode_enter = false;
 
 	if (plat) {
 #ifdef CONFIG_I2C_PXA_SLAVE
@@ -1160,7 +1211,17 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		i2c->adap.class = plat->class;
 	}
 
-	clk_enable(i2c->clk);
+	if (i2c->high_mode) {
+		if (i2c->rate) {
+			clk_set_rate(i2c->clk, i2c->rate);
+			pr_info("i2c: <%s> set rate to %ld\n",
+				i2c->adap.name, clk_get_rate(i2c->clk));
+		} else
+			pr_warn("i2c: <%s> clock rate not set\n",
+				i2c->adap.name);
+	}
+
+	clk_prepare_enable(i2c->clk);
 
 	if (i2c->use_pio) {
 		i2c->adap.algo = &i2c_pxa_pio_algorithm;
@@ -1185,7 +1246,6 @@ static int i2c_pxa_probe(struct platform_device *dev)
 		printk(KERN_INFO "I2C: Failed to add bus\n");
 		goto eadapt;
 	}
-	of_i2c_register_devices(&i2c->adap);
 
 	platform_set_drvdata(dev, i2c);
 
@@ -1202,7 +1262,7 @@ eadapt:
 	if (!i2c->use_pio)
 		free_irq(irq, i2c);
 ereqirq:
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	iounmap(i2c->reg_base);
 eremap:
 	clk_put(i2c->clk);
@@ -1221,7 +1281,7 @@ static int i2c_pxa_remove(struct platform_device *dev)
 	if (!i2c->use_pio)
 		free_irq(i2c->irq, i2c);
 
-	clk_disable(i2c->clk);
+	clk_disable_unprepare(i2c->clk);
 	clk_put(i2c->clk);
 
 	iounmap(i2c->reg_base);
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 4ba4a95..2c2fd7c 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -33,6 +33,7 @@
 #include <linux/i2c/i2c-rcar.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_device.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/slab.h>
@@ -101,6 +102,11 @@ enum {
 #define ID_ARBLOST	(1 << 3)
 #define ID_NACK		(1 << 4)
 
+enum rcar_i2c_type {
+	I2C_RCAR_GEN1,
+	I2C_RCAR_GEN2,
+};
+
 struct rcar_i2c_priv {
 	void __iomem *io;
 	struct i2c_adapter adap;
@@ -113,6 +119,7 @@ struct rcar_i2c_priv {
 	int irq;
 	u32 icccr;
 	u32 flags;
+	enum rcar_i2c_type	devtype;
 };
 
 #define rcar_i2c_priv_to_dev(p)		((p)->adap.dev.parent)
@@ -220,13 +227,27 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
 				    u32 bus_speed,
 				    struct device *dev)
 {
-	struct clk *clkp = clk_get(NULL, "peripheral_clk");
+	struct clk *clkp = clk_get(dev, NULL);
 	u32 scgd, cdf;
 	u32 round, ick;
 	u32 scl;
+	u32 cdf_width;
+	unsigned long rate;
+
+	if (IS_ERR(clkp)) {
+		dev_err(dev, "couldn't get clock\n");
+		return PTR_ERR(clkp);
+	}
 
-	if (!clkp) {
-		dev_err(dev, "there is no peripheral_clk\n");
+	switch (priv->devtype) {
+	case I2C_RCAR_GEN1:
+		cdf_width = 2;
+		break;
+	case I2C_RCAR_GEN2:
+		cdf_width = 3;
+		break;
+	default:
+		dev_err(dev, "device type error\n");
 		return -EIO;
 	}
 
@@ -245,15 +266,14 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
 	 * clkp : peripheral_clk
 	 * F[]  : integer up-valuation
 	 */
-	for (cdf = 0; cdf < 4; cdf++) {
-		ick = clk_get_rate(clkp) / (1 + cdf);
-		if (ick < 20000000)
-			goto ick_find;
+	rate = clk_get_rate(clkp);
+	cdf = rate / 20000000;
+	if (cdf >= 1 << cdf_width) {
+		dev_err(dev, "Input clock %lu too high\n", rate);
+		return -EIO;
 	}
-	dev_err(dev, "there is no best CDF\n");
-	return -EIO;
+	ick = rate / (cdf + 1);
 
-ick_find:
 	/*
 	 * it is impossible to calculate large scale
 	 * number on u32. separate it
@@ -271,6 +291,12 @@ ick_find:
 	 *
 	 * Calculation result (= SCL) should be less than
 	 * bus_speed for hardware safety
+	 *
+	 * We could use something along the lines of
+	 *	div = ick / (bus_speed + 1) + 1;
+	 *	scgd = (div - 20 - round + 7) / 8;
+	 *	scl = ick / (20 + (scgd * 8) + round);
+	 * (not fully verified) but that would get pretty involved
 	 */
 	for (scgd = 0; scgd < 0x40; scgd++) {
 		scl = ick / (20 + (scgd * 8) + round);
@@ -287,7 +313,7 @@ scgd_find:
 	/*
 	 * keep icccr value
 	 */
-	priv->icccr = (scgd << 2 | cdf);
+	priv->icccr = scgd << cdf_width | cdf;
 
 	return 0;
 }
@@ -613,9 +639,18 @@ static const struct i2c_algorithm rcar_i2c_algo = {
 	.functionality	= rcar_i2c_func,
 };
 
+static const struct of_device_id rcar_i2c_dt_ids[] = {
+	{ .compatible = "renesas,i2c-rcar", .data = (void *)I2C_RCAR_GEN1 },
+	{ .compatible = "renesas,i2c-r8a7778", .data = (void *)I2C_RCAR_GEN1 },
+	{ .compatible = "renesas,i2c-r8a7779", .data = (void *)I2C_RCAR_GEN1 },
+	{ .compatible = "renesas,i2c-r8a7790", .data = (void *)I2C_RCAR_GEN2 },
+	{},
+};
+MODULE_DEVICE_TABLE(of, rcar_i2c_dt_ids);
+
 static int rcar_i2c_probe(struct platform_device *pdev)
 {
-	struct i2c_rcar_platform_data *pdata = pdev->dev.platform_data;
+	struct i2c_rcar_platform_data *pdata = dev_get_platdata(&pdev->dev);
 	struct rcar_i2c_priv *priv;
 	struct i2c_adapter *adap;
 	struct resource *res;
@@ -623,12 +658,6 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	u32 bus_speed;
 	int ret;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(dev, "no mmio resources\n");
-		return -ENODEV;
-	}
-
 	priv = devm_kzalloc(dev, sizeof(struct rcar_i2c_priv), GFP_KERNEL);
 	if (!priv) {
 		dev_err(dev, "no mem for private data\n");
@@ -636,12 +665,21 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	}
 
 	bus_speed = 100000; /* default 100 kHz */
-	if (pdata && pdata->bus_speed)
+	ret = of_property_read_u32(dev->of_node, "clock-frequency", &bus_speed);
+	if (ret < 0 && pdata && pdata->bus_speed)
 		bus_speed = pdata->bus_speed;
+
+	if (pdev->dev.of_node)
+		priv->devtype = (long)of_match_device(rcar_i2c_dt_ids,
+						      dev)->data;
+	else
+		priv->devtype = platform_get_device_id(pdev)->driver_data;
+
 	ret = rcar_i2c_clock_calculate(priv, bus_speed, dev);
 	if (ret < 0)
 		return ret;
 
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	priv->io = devm_ioremap_resource(dev, res);
 	if (IS_ERR(priv->io))
 		return PTR_ERR(priv->io);
@@ -656,6 +694,7 @@ static int rcar_i2c_probe(struct platform_device *pdev)
 	adap->class		= I2C_CLASS_HWMON | I2C_CLASS_SPD;
 	adap->retries		= 3;
 	adap->dev.parent	= dev;
+	adap->dev.of_node	= dev->of_node;
 	i2c_set_adapdata(adap, priv);
 	strlcpy(adap->name, pdev->name, sizeof(adap->name));
 
@@ -691,13 +730,23 @@ static int rcar_i2c_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static struct platform_device_id rcar_i2c_id_table[] = {
+	{ "i2c-rcar",		I2C_RCAR_GEN1 },
+	{ "i2c-rcar_gen1",	I2C_RCAR_GEN1 },
+	{ "i2c-rcar_gen2",	I2C_RCAR_GEN2 },
+	{},
+};
+MODULE_DEVICE_TABLE(platform, rcar_i2c_id_table);
+
 static struct platform_driver rcar_i2c_driver = {
 	.driver	= {
 		.name	= "i2c-rcar",
 		.owner	= THIS_MODULE,
+		.of_match_table = rcar_i2c_dt_ids,
 	},
 	.probe		= rcar_i2c_probe,
 	.remove		= rcar_i2c_remove,
+	.id_table	= rcar_i2c_id_table,
 };
 
 module_platform_driver(rcar_i2c_driver);
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index cab1c91..bf8fb94 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -36,7 +36,7 @@
 #include <linux/cpufreq.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <linux/of_i2c.h>
+#include <linux/of.h>
 #include <linux/of_gpio.h>
 #include <linux/pinctrl/consumer.h>
 
@@ -1033,7 +1033,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 	int ret;
 
 	if (!pdev->dev.of_node) {
-		pdata = pdev->dev.platform_data;
+		pdata = dev_get_platdata(&pdev->dev);
 		if (!pdata) {
 			dev_err(&pdev->dev, "no platform data\n");
 			return -EINVAL;
@@ -1154,7 +1154,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	of_i2c_register_devices(&i2c->adap);
 	platform_set_drvdata(pdev, i2c);
 
 	pm_runtime_enable(&pdev->dev);
@@ -1180,8 +1179,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&i2c->adap);
 
-	clk_disable_unprepare(i2c->clk);
-
 	if (pdev->dev.of_node && IS_ERR(i2c->pctrl))
 		s3c24xx_i2c_dt_gpio_free(i2c);
 
diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
index 7c1ca5a..dd186a0 100644
--- a/drivers/i2c/busses/i2c-s6000.c
+++ b/drivers/i2c/busses/i2c-s6000.c
@@ -290,8 +290,9 @@ static int s6i2c_probe(struct platform_device *dev)
 
 	clock = 0;
 	bus_num = -1;
-	if (dev->dev.platform_data) {
-		struct s6_i2c_platform_data *pdata = dev->dev.platform_data;
+	if (dev_get_platdata(&dev->dev)) {
+		struct s6_i2c_platform_data *pdata =
+			dev_get_platdata(&dev->dev);
 		bus_num = pdata->bus_num;
 		clock = pdata->clock;
 	}
diff --git a/drivers/i2c/busses/i2c-scmi.c b/drivers/i2c/busses/i2c-scmi.c
index c447e8d..5992355 100644
--- a/drivers/i2c/busses/i2c-scmi.c
+++ b/drivers/i2c/busses/i2c-scmi.c
@@ -223,7 +223,7 @@ acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
 		goto out;
 
 	obj = pkg->package.elements + 1;
-	if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+	if (obj->type != ACPI_TYPE_INTEGER) {
 		ACPI_ERROR((AE_INFO, "Invalid argument type"));
 		result = -EIO;
 		goto out;
@@ -235,7 +235,7 @@ acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
 	case I2C_SMBUS_BYTE:
 	case I2C_SMBUS_BYTE_DATA:
 	case I2C_SMBUS_WORD_DATA:
-		if (obj == NULL || obj->type != ACPI_TYPE_INTEGER) {
+		if (obj->type != ACPI_TYPE_INTEGER) {
 			ACPI_ERROR((AE_INFO, "Invalid argument type"));
 			result = -EIO;
 			goto out;
@@ -246,7 +246,7 @@ acpi_smbus_cmi_access(struct i2c_adapter *adap, u16 addr, unsigned short flags,
 			data->byte = obj->integer.value;
 		break;
 	case I2C_SMBUS_BLOCK_DATA:
-		if (obj == NULL || obj->type != ACPI_TYPE_BUFFER) {
+		if (obj->type != ACPI_TYPE_BUFFER) {
 			ACPI_ERROR((AE_INFO, "Invalid argument type"));
 			result = -EIO;
 			goto out;
diff --git a/drivers/i2c/busses/i2c-sh7760.c b/drivers/i2c/busses/i2c-sh7760.c
index 5351a2f..5e8f136 100644
--- a/drivers/i2c/busses/i2c-sh7760.c
+++ b/drivers/i2c/busses/i2c-sh7760.c
@@ -437,7 +437,7 @@ static int sh7760_i2c_probe(struct platform_device *pdev)
 	struct cami2c *id;
 	int ret;
 
-	pd = pdev->dev.platform_data;
+	pd = dev_get_platdata(&pdev->dev);
 	if (!pd) {
 		dev_err(&pdev->dev, "no platform_data!\n");
 		ret = -ENODEV;
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index debf745..1d79585 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -27,7 +27,6 @@
 #include <linux/platform_device.h>
 #include <linux/interrupt.h>
 #include <linux/i2c.h>
-#include <linux/of_i2c.h>
 #include <linux/err.h>
 #include <linux/pm_runtime.h>
 #include <linux/clk.h>
@@ -236,7 +235,7 @@ static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
 	int offset;
 
 	/* Get clock rate after clock is enabled */
-	clk_enable(pd->clk);
+	clk_prepare_enable(pd->clk);
 	i2c_clk_khz = clk_get_rate(pd->clk) / 1000;
 	i2c_clk_khz /= pd->clks_per_count;
 
@@ -271,14 +270,14 @@ static void sh_mobile_i2c_init(struct sh_mobile_i2c_data *pd)
 		pd->icic &= ~ICIC_ICCHB8;
 
 out:
-	clk_disable(pd->clk);
+	clk_disable_unprepare(pd->clk);
 }
 
 static void activate_ch(struct sh_mobile_i2c_data *pd)
 {
 	/* Wake up device and enable clock */
 	pm_runtime_get_sync(pd->dev);
-	clk_enable(pd->clk);
+	clk_prepare_enable(pd->clk);
 
 	/* Enable channel and configure rx ack */
 	iic_set_clr(pd, ICCR, ICCR_ICE, 0);
@@ -301,7 +300,7 @@ static void deactivate_ch(struct sh_mobile_i2c_data *pd)
 	iic_set_clr(pd, ICCR, 0, ICCR_ICE);
 
 	/* Disable clock and mark device as idle */
-	clk_disable(pd->clk);
+	clk_disable_unprepare(pd->clk);
 	pm_runtime_put_sync(pd->dev);
 }
 
@@ -658,7 +657,7 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, int hook)
 
 static int sh_mobile_i2c_probe(struct platform_device *dev)
 {
-	struct i2c_sh_mobile_platform_data *pdata = dev->dev.platform_data;
+	struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev);
 	struct sh_mobile_i2c_data *pd;
 	struct i2c_adapter *adap;
 	struct resource *res;
@@ -758,7 +757,6 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 		 "I2C adapter %d with bus speed %lu Hz (L/H=%x/%x)\n",
 		 adap->nr, pd->bus_speed, pd->iccl, pd->icch);
 
-	of_i2c_register_devices(adap);
 	return 0;
 
  err_all:
diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c
index a63c7d5..6784f7f 100644
--- a/drivers/i2c/busses/i2c-sirf.c
+++ b/drivers/i2c/busses/i2c-sirf.c
@@ -12,7 +12,6 @@
 #include <linux/slab.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
-#include <linux/of_i2c.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
@@ -65,6 +64,8 @@
 #define SIRFSOC_I2C_START		BIT(7)
 
 #define SIRFSOC_I2C_DEFAULT_SPEED 100000
+#define SIRFSOC_I2C_ERR_NOACK      1
+#define SIRFSOC_I2C_ERR_TIMEOUT    2
 
 struct sirfsoc_i2c {
 	void __iomem *base;
@@ -143,14 +144,24 @@ static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id)
 
 	if (i2c_stat & SIRFSOC_I2C_STAT_ERR) {
 		/* Error conditions */
-		siic->err_status = 1;
+		siic->err_status = SIRFSOC_I2C_ERR_NOACK;
 		writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS);
 
 		if (i2c_stat & SIRFSOC_I2C_STAT_NACK)
-			dev_err(&siic->adapter.dev, "ACK not received\n");
+			dev_dbg(&siic->adapter.dev, "ACK not received\n");
 		else
 			dev_err(&siic->adapter.dev, "I2C error\n");
 
+		/*
+		 * Due to hardware ANOMALY, we need to reset I2C earlier after
+		 * we get NOACK while accessing non-existing clients, otherwise
+		 * we will get errors even we access existing clients later
+		 */
+		writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
+				siic->base + SIRFSOC_I2C_CTRL);
+		while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+			cpu_relax();
+
 		complete(&siic->done);
 	} else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) {
 		/* CMD buffer execution complete */
@@ -183,6 +194,10 @@ static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic,
 	if (msg->flags & I2C_M_RD)
 		addr |= 1;
 
+	/* Reverse direction bit */
+	if (msg->flags & I2C_M_REV_DIR_ADDR)
+		addr ^= 1;
+
 	writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++));
 }
 
@@ -191,7 +206,6 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
 	u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL);
 	/* timeout waiting for the xfer to finish or fail */
 	int timeout = msecs_to_jiffies((msg->len + 1) * 50);
-	int ret = 0;
 
 	i2c_sirfsoc_set_address(siic, msg);
 
@@ -200,7 +214,7 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
 	i2c_sirfsoc_queue_cmd(siic);
 
 	if (wait_for_completion_timeout(&siic->done, timeout) == 0) {
-		siic->err_status = 1;
+		siic->err_status = SIRFSOC_I2C_ERR_TIMEOUT;
 		dev_err(&siic->adapter.dev, "Transfer timeout\n");
 	}
 
@@ -208,16 +222,14 @@ static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg)
 		siic->base + SIRFSOC_I2C_CTRL);
 	writel(0, siic->base + SIRFSOC_I2C_CMD_START);
 
-	if (siic->err_status) {
+	/* i2c control doesn't response, reset it */
+	if (siic->err_status == SIRFSOC_I2C_ERR_TIMEOUT) {
 		writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET,
 			siic->base + SIRFSOC_I2C_CTRL);
 		while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
 			cpu_relax();
-
-		ret = -EIO;
 	}
-
-	return ret;
+	return siic->err_status ? -EAGAIN : 0;
 }
 
 static u32 i2c_sirfsoc_func(struct i2c_adapter *adap)
@@ -321,6 +333,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 
 	adap->algo = &i2c_sirfsoc_algo;
 	adap->algo_data = siic;
+	adap->retries = 3;
 
 	adap->dev.of_node = pdev->dev.of_node;
 	adap->dev.parent = &pdev->dev;
@@ -348,7 +361,7 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 
 	if (bitrate < 100000)
 		regval =
-			(2 * ctrl_speed) / (2 * bitrate * 11);
+			(2 * ctrl_speed) / (bitrate * 11);
 	else
 		regval = ctrl_speed / (bitrate * 5);
 
@@ -366,8 +379,6 @@ static int i2c_sirfsoc_probe(struct platform_device *pdev)
 
 	clk_disable(clk);
 
-	of_i2c_register_devices(adap);
-
 	dev_info(&pdev->dev, " I2C adapter ready to operate\n");
 
 	return 0;
@@ -416,6 +427,8 @@ static int i2c_sirfsoc_resume(struct device *dev)
 
 	clk_enable(siic->clk);
 	writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL);
+	while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET)
+		cpu_relax();
 	writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE,
 		siic->base + SIRFSOC_I2C_CTRL);
 	writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL);
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c
new file mode 100644
index 0000000..9cf715d
--- /dev/null
+++ b/drivers/i2c/busses/i2c-st.c
@@ -0,0 +1,872 @@
+/*
+ * Copyright (C) 2013 STMicroelectronics
+ *
+ * I2C master mode controller driver, used in STMicroelectronics devices.
+ *
+ * Author: Maxime Coquelin <maxime.coquelin@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+
+/* SSC registers */
+#define SSC_BRG				0x000
+#define SSC_TBUF			0x004
+#define SSC_RBUF			0x008
+#define SSC_CTL				0x00C
+#define SSC_IEN				0x010
+#define SSC_STA				0x014
+#define SSC_I2C				0x018
+#define SSC_SLAD			0x01C
+#define SSC_REP_START_HOLD		0x020
+#define SSC_START_HOLD			0x024
+#define SSC_REP_START_SETUP		0x028
+#define SSC_DATA_SETUP			0x02C
+#define SSC_STOP_SETUP			0x030
+#define SSC_BUS_FREE			0x034
+#define SSC_TX_FSTAT			0x038
+#define SSC_RX_FSTAT			0x03C
+#define SSC_PRE_SCALER_BRG		0x040
+#define SSC_CLR				0x080
+#define SSC_NOISE_SUPP_WIDTH		0x100
+#define SSC_PRSCALER			0x104
+#define SSC_NOISE_SUPP_WIDTH_DATAOUT	0x108
+#define SSC_PRSCALER_DATAOUT		0x10c
+
+/* SSC Control */
+#define SSC_CTL_DATA_WIDTH_9		0x8
+#define SSC_CTL_DATA_WIDTH_MSK		0xf
+#define SSC_CTL_BM			0xf
+#define SSC_CTL_HB			BIT(4)
+#define SSC_CTL_PH			BIT(5)
+#define SSC_CTL_PO			BIT(6)
+#define SSC_CTL_SR			BIT(7)
+#define SSC_CTL_MS			BIT(8)
+#define SSC_CTL_EN			BIT(9)
+#define SSC_CTL_LPB			BIT(10)
+#define SSC_CTL_EN_TX_FIFO		BIT(11)
+#define SSC_CTL_EN_RX_FIFO		BIT(12)
+#define SSC_CTL_EN_CLST_RX		BIT(13)
+
+/* SSC Interrupt Enable */
+#define SSC_IEN_RIEN			BIT(0)
+#define SSC_IEN_TIEN			BIT(1)
+#define SSC_IEN_TEEN			BIT(2)
+#define SSC_IEN_REEN			BIT(3)
+#define SSC_IEN_PEEN			BIT(4)
+#define SSC_IEN_AASEN			BIT(6)
+#define SSC_IEN_STOPEN			BIT(7)
+#define SSC_IEN_ARBLEN			BIT(8)
+#define SSC_IEN_NACKEN			BIT(10)
+#define SSC_IEN_REPSTRTEN		BIT(11)
+#define SSC_IEN_TX_FIFO_HALF		BIT(12)
+#define SSC_IEN_RX_FIFO_HALF_FULL	BIT(14)
+
+/* SSC Status */
+#define SSC_STA_RIR			BIT(0)
+#define SSC_STA_TIR			BIT(1)
+#define SSC_STA_TE			BIT(2)
+#define SSC_STA_RE			BIT(3)
+#define SSC_STA_PE			BIT(4)
+#define SSC_STA_CLST			BIT(5)
+#define SSC_STA_AAS			BIT(6)
+#define SSC_STA_STOP			BIT(7)
+#define SSC_STA_ARBL			BIT(8)
+#define SSC_STA_BUSY			BIT(9)
+#define SSC_STA_NACK			BIT(10)
+#define SSC_STA_REPSTRT			BIT(11)
+#define SSC_STA_TX_FIFO_HALF		BIT(12)
+#define SSC_STA_TX_FIFO_FULL		BIT(13)
+#define SSC_STA_RX_FIFO_HALF		BIT(14)
+
+/* SSC I2C Control */
+#define SSC_I2C_I2CM			BIT(0)
+#define SSC_I2C_STRTG			BIT(1)
+#define SSC_I2C_STOPG			BIT(2)
+#define SSC_I2C_ACKG			BIT(3)
+#define SSC_I2C_AD10			BIT(4)
+#define SSC_I2C_TXENB			BIT(5)
+#define SSC_I2C_REPSTRTG		BIT(11)
+#define SSC_I2C_SLAVE_DISABLE		BIT(12)
+
+/* SSC Tx FIFO Status */
+#define SSC_TX_FSTAT_STATUS		0x07
+
+/* SSC Rx FIFO Status */
+#define SSC_RX_FSTAT_STATUS		0x07
+
+/* SSC Clear bit operation */
+#define SSC_CLR_SSCAAS			BIT(6)
+#define SSC_CLR_SSCSTOP			BIT(7)
+#define SSC_CLR_SSCARBL			BIT(8)
+#define SSC_CLR_NACK			BIT(10)
+#define SSC_CLR_REPSTRT			BIT(11)
+
+/* SSC Clock Prescaler */
+#define SSC_PRSC_VALUE			0x0f
+
+
+#define SSC_TXFIFO_SIZE			0x8
+#define SSC_RXFIFO_SIZE			0x8
+
+enum st_i2c_mode {
+	I2C_MODE_STANDARD,
+	I2C_MODE_FAST,
+	I2C_MODE_END,
+};
+
+/**
+ * struct st_i2c_timings - per-Mode tuning parameters
+ * @rate: I2C bus rate
+ * @rep_start_hold: I2C repeated start hold time requirement
+ * @rep_start_setup: I2C repeated start set up time requirement
+ * @start_hold: I2C start hold time requirement
+ * @data_setup_time: I2C data set up time requirement
+ * @stop_setup_time: I2C stop set up time requirement
+ * @bus_free_time: I2C bus free time requirement
+ * @sda_pulse_min_limit: I2C SDA pulse mini width limit
+ */
+struct st_i2c_timings {
+	u32 rate;
+	u32 rep_start_hold;
+	u32 rep_start_setup;
+	u32 start_hold;
+	u32 data_setup_time;
+	u32 stop_setup_time;
+	u32 bus_free_time;
+	u32 sda_pulse_min_limit;
+};
+
+/**
+ * struct st_i2c_client - client specific data
+ * @addr: 8-bit slave addr, including r/w bit
+ * @count: number of bytes to be transfered
+ * @xfered: number of bytes already transferred
+ * @buf: data buffer
+ * @result: result of the transfer
+ * @stop: last I2C msg to be sent, i.e. STOP to be generated
+ */
+struct st_i2c_client {
+	u8	addr;
+	u32	count;
+	u32	xfered;
+	u8	*buf;
+	int	result;
+	bool	stop;
+};
+
+/**
+ * struct st_i2c_dev - private data of the controller
+ * @adap: I2C adapter for this controller
+ * @dev: device for this controller
+ * @base: virtual memory area
+ * @complete: completion of I2C message
+ * @irq: interrupt line for th controller
+ * @clk: hw ssc block clock
+ * @mode: I2C mode of the controller. Standard or Fast only supported
+ * @scl_min_width_us: SCL line minimum pulse width in us
+ * @sda_min_width_us: SDA line minimum pulse width in us
+ * @client: I2C transfert information
+ * @busy: I2C transfer on-going
+ */
+struct st_i2c_dev {
+	struct i2c_adapter	adap;
+	struct device		*dev;
+	void __iomem		*base;
+	struct completion	complete;
+	int			irq;
+	struct clk		*clk;
+	int			mode;
+	u32			scl_min_width_us;
+	u32			sda_min_width_us;
+	struct st_i2c_client	client;
+	bool			busy;
+};
+
+static inline void st_i2c_set_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) | mask, reg);
+}
+
+static inline void st_i2c_clr_bits(void __iomem *reg, u32 mask)
+{
+	writel_relaxed(readl_relaxed(reg) & ~mask, reg);
+}
+
+/* From I2C Specifications v0.5 */
+static struct st_i2c_timings i2c_timings[] = {
+	[I2C_MODE_STANDARD] = {
+		.rate			= 100000,
+		.rep_start_hold		= 4000,
+		.rep_start_setup	= 4700,
+		.start_hold		= 4000,
+		.data_setup_time	= 250,
+		.stop_setup_time	= 4000,
+		.bus_free_time		= 4700,
+	},
+	[I2C_MODE_FAST] = {
+		.rate			= 400000,
+		.rep_start_hold		= 600,
+		.rep_start_setup	= 600,
+		.start_hold		= 600,
+		.data_setup_time	= 100,
+		.stop_setup_time	= 600,
+		.bus_free_time		= 1300,
+	},
+};
+
+static void st_i2c_flush_rx_fifo(struct st_i2c_dev *i2c_dev)
+{
+	int count, i;
+
+	/*
+	 * Counter only counts up to 7 but fifo size is 8...
+	 * When fifo is full, counter is 0 and RIR bit of status register is
+	 * set
+	 */
+	if (readl_relaxed(i2c_dev->base + SSC_STA) & SSC_STA_RIR)
+		count = SSC_RXFIFO_SIZE;
+	else
+		count = readl_relaxed(i2c_dev->base + SSC_RX_FSTAT) &
+			SSC_RX_FSTAT_STATUS;
+
+	for (i = 0; i < count; i++)
+		readl_relaxed(i2c_dev->base + SSC_RBUF);
+}
+
+static void st_i2c_soft_reset(struct st_i2c_dev *i2c_dev)
+{
+	/*
+	 * FIFO needs to be emptied before reseting the IP,
+	 * else the controller raises a BUSY error.
+	 */
+	st_i2c_flush_rx_fifo(i2c_dev);
+
+	st_i2c_set_bits(i2c_dev->base + SSC_CTL, SSC_CTL_SR);
+	st_i2c_clr_bits(i2c_dev->base + SSC_CTL, SSC_CTL_SR);
+}
+
+/**
+ * st_i2c_hw_config() - Prepare SSC block, calculate and apply tuning timings
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_hw_config(struct st_i2c_dev *i2c_dev)
+{
+	unsigned long rate;
+	u32 val, ns_per_clk;
+	struct st_i2c_timings *t = &i2c_timings[i2c_dev->mode];
+
+	st_i2c_soft_reset(i2c_dev);
+
+	val = SSC_CLR_REPSTRT | SSC_CLR_NACK | SSC_CLR_SSCARBL |
+		SSC_CLR_SSCAAS | SSC_CLR_SSCSTOP;
+	writel_relaxed(val, i2c_dev->base + SSC_CLR);
+
+	/* SSC Control register setup */
+	val = SSC_CTL_PO | SSC_CTL_PH | SSC_CTL_HB | SSC_CTL_DATA_WIDTH_9;
+	writel_relaxed(val, i2c_dev->base + SSC_CTL);
+
+	rate = clk_get_rate(i2c_dev->clk);
+	ns_per_clk = 1000000000 / rate;
+
+	/* Baudrate */
+	val = rate / (2 * t->rate);
+	writel_relaxed(val, i2c_dev->base + SSC_BRG);
+
+	/* Pre-scaler baudrate */
+	writel_relaxed(1, i2c_dev->base + SSC_PRE_SCALER_BRG);
+
+	/* Enable I2C mode */
+	writel_relaxed(SSC_I2C_I2CM, i2c_dev->base + SSC_I2C);
+
+	/* Repeated start hold time */
+	val = t->rep_start_hold / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_REP_START_HOLD);
+
+	/* Repeated start set up time */
+	val = t->rep_start_setup / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_REP_START_SETUP);
+
+	/* Start hold time */
+	val = t->start_hold / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_START_HOLD);
+
+	/* Data set up time */
+	val = t->data_setup_time / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_DATA_SETUP);
+
+	/* Stop set up time */
+	val = t->stop_setup_time / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_STOP_SETUP);
+
+	/* Bus free time */
+	val = t->bus_free_time / ns_per_clk;
+	writel_relaxed(val, i2c_dev->base + SSC_BUS_FREE);
+
+	/* Prescalers set up */
+	val = rate / 10000000;
+	writel_relaxed(val, i2c_dev->base + SSC_PRSCALER);
+	writel_relaxed(val, i2c_dev->base + SSC_PRSCALER_DATAOUT);
+
+	/* Noise suppression witdh */
+	val = i2c_dev->scl_min_width_us * rate / 100000000;
+	writel_relaxed(val, i2c_dev->base + SSC_NOISE_SUPP_WIDTH);
+
+	/* Noise suppression max output data delay width */
+	val = i2c_dev->sda_min_width_us * rate / 100000000;
+	writel_relaxed(val, i2c_dev->base + SSC_NOISE_SUPP_WIDTH_DATAOUT);
+}
+
+static int st_i2c_wait_free_bus(struct st_i2c_dev *i2c_dev)
+{
+	u32 sta;
+	int i;
+
+	for (i = 0; i < 10; i++) {
+		sta = readl_relaxed(i2c_dev->base + SSC_STA);
+		if (!(sta & SSC_STA_BUSY))
+			return 0;
+
+		usleep_range(2000, 4000);
+	}
+
+	dev_err(i2c_dev->dev, "bus not free (status = 0x%08x)\n", sta);
+
+	return -EBUSY;
+}
+
+/**
+ * st_i2c_write_tx_fifo() - Write a byte in the Tx FIFO
+ * @i2c_dev: Controller's private data
+ * @byte: Data to write in the Tx FIFO
+ */
+static inline void st_i2c_write_tx_fifo(struct st_i2c_dev *i2c_dev, u8 byte)
+{
+	u16 tbuf = byte << 1;
+
+	writel_relaxed(tbuf | 1, i2c_dev->base + SSC_TBUF);
+}
+
+/**
+ * st_i2c_wr_fill_tx_fifo() - Fill the Tx FIFO in write mode
+ * @i2c_dev: Controller's private data
+ *
+ * This functions fills the Tx FIFO with I2C transfert buffer when
+ * in write mode.
+ */
+static void st_i2c_wr_fill_tx_fifo(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 tx_fstat, sta;
+	int i;
+
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+	if (sta & SSC_STA_TX_FIFO_FULL)
+		return;
+
+	tx_fstat = readl_relaxed(i2c_dev->base + SSC_TX_FSTAT);
+	tx_fstat &= SSC_TX_FSTAT_STATUS;
+
+	if (c->count < (SSC_TXFIFO_SIZE - tx_fstat))
+		i = c->count;
+	else
+		i = SSC_TXFIFO_SIZE - tx_fstat;
+
+	for (; i > 0; i--, c->count--, c->buf++)
+		st_i2c_write_tx_fifo(i2c_dev, *c->buf);
+}
+
+/**
+ * st_i2c_rd_fill_tx_fifo() - Fill the Tx FIFO in read mode
+ * @i2c_dev: Controller's private data
+ *
+ * This functions fills the Tx FIFO with fixed pattern when
+ * in read mode to trigger clock.
+ */
+static void st_i2c_rd_fill_tx_fifo(struct st_i2c_dev *i2c_dev, int max)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 tx_fstat, sta;
+	int i;
+
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+	if (sta & SSC_STA_TX_FIFO_FULL)
+		return;
+
+	tx_fstat = readl_relaxed(i2c_dev->base + SSC_TX_FSTAT);
+	tx_fstat &= SSC_TX_FSTAT_STATUS;
+
+	if (max < (SSC_TXFIFO_SIZE - tx_fstat))
+		i = max;
+	else
+		i = SSC_TXFIFO_SIZE - tx_fstat;
+
+	for (; i > 0; i--, c->xfered++)
+		st_i2c_write_tx_fifo(i2c_dev, 0xff);
+}
+
+static void st_i2c_read_rx_fifo(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 i, sta;
+	u16 rbuf;
+
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+	if (sta & SSC_STA_RIR) {
+		i = SSC_RXFIFO_SIZE;
+	} else {
+		i = readl_relaxed(i2c_dev->base + SSC_RX_FSTAT);
+		i &= SSC_RX_FSTAT_STATUS;
+	}
+
+	for (; (i > 0) && (c->count > 0); i--, c->count--) {
+		rbuf = readl_relaxed(i2c_dev->base + SSC_RBUF) >> 1;
+		*c->buf++ = (u8)rbuf & 0xff;
+	}
+
+	if (i) {
+		dev_err(i2c_dev->dev, "Unexpected %d bytes in rx fifo\n", i);
+		st_i2c_flush_rx_fifo(i2c_dev);
+	}
+}
+
+/**
+ * st_i2c_terminate_xfer() - Send either STOP or REPSTART condition
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_terminate_xfer(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+
+	st_i2c_clr_bits(i2c_dev->base + SSC_IEN, SSC_IEN_TEEN);
+	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
+
+	if (c->stop) {
+		st_i2c_set_bits(i2c_dev->base + SSC_IEN, SSC_IEN_STOPEN);
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
+	} else {
+		st_i2c_set_bits(i2c_dev->base + SSC_IEN, SSC_IEN_REPSTRTEN);
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_REPSTRTG);
+	}
+}
+
+/**
+ * st_i2c_handle_write() - Handle FIFO empty interrupt in case of write
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_handle_write(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+
+	st_i2c_flush_rx_fifo(i2c_dev);
+
+	if (!c->count)
+		/* End of xfer, send stop or repstart */
+		st_i2c_terminate_xfer(i2c_dev);
+	else
+		st_i2c_wr_fill_tx_fifo(i2c_dev);
+}
+
+/**
+ * st_i2c_handle_write() - Handle FIFO enmpty interrupt in case of read
+ * @i2c_dev: Controller's private data
+ */
+static void st_i2c_handle_read(struct st_i2c_dev *i2c_dev)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 ien;
+
+	/* Trash the address read back */
+	if (!c->xfered) {
+		readl_relaxed(i2c_dev->base + SSC_RBUF);
+		st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_TXENB);
+	} else {
+		st_i2c_read_rx_fifo(i2c_dev);
+	}
+
+	if (!c->count) {
+		/* End of xfer, send stop or repstart */
+		st_i2c_terminate_xfer(i2c_dev);
+	} else if (c->count == 1) {
+		/* Penultimate byte to xfer, disable ACK gen. */
+		st_i2c_clr_bits(i2c_dev->base + SSC_I2C, SSC_I2C_ACKG);
+
+		/* Last received byte is to be handled by NACK interrupt */
+		ien = SSC_IEN_NACKEN | SSC_IEN_ARBLEN;
+		writel_relaxed(ien, i2c_dev->base + SSC_IEN);
+
+		st_i2c_rd_fill_tx_fifo(i2c_dev, c->count);
+	} else {
+		st_i2c_rd_fill_tx_fifo(i2c_dev, c->count - 1);
+	}
+}
+
+/**
+ * st_i2c_isr() - Interrupt routine
+ * @irq: interrupt number
+ * @data: Controller's private data
+ */
+static irqreturn_t st_i2c_isr_thread(int irq, void *data)
+{
+	struct st_i2c_dev *i2c_dev = data;
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 sta, ien;
+	int it;
+
+	ien = readl_relaxed(i2c_dev->base + SSC_IEN);
+	sta = readl_relaxed(i2c_dev->base + SSC_STA);
+
+	/* Use __fls() to check error bits first */
+	it = __fls(sta & ien);
+	if (it < 0) {
+		dev_dbg(i2c_dev->dev, "spurious it (sta=0x%04x, ien=0x%04x)\n",
+				sta, ien);
+		return IRQ_NONE;
+	}
+
+	switch (1 << it) {
+	case SSC_STA_TE:
+		if (c->addr & I2C_M_RD)
+			st_i2c_handle_read(i2c_dev);
+		else
+			st_i2c_handle_write(i2c_dev);
+		break;
+
+	case SSC_STA_STOP:
+	case SSC_STA_REPSTRT:
+		writel_relaxed(0, i2c_dev->base + SSC_IEN);
+		complete(&i2c_dev->complete);
+		break;
+
+	case SSC_STA_NACK:
+		writel_relaxed(SSC_CLR_NACK, i2c_dev->base + SSC_CLR);
+
+		/* Last received byte handled by NACK interrupt */
+		if ((c->addr & I2C_M_RD) && (c->count == 1) && (c->xfered)) {
+			st_i2c_handle_read(i2c_dev);
+			break;
+		}
+
+		it = SSC_IEN_STOPEN | SSC_IEN_ARBLEN;
+		writel_relaxed(it, i2c_dev->base + SSC_IEN);
+
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
+		c->result = -EIO;
+		break;
+
+	case SSC_STA_ARBL:
+		writel_relaxed(SSC_CLR_SSCARBL, i2c_dev->base + SSC_CLR);
+
+		it = SSC_IEN_STOPEN | SSC_IEN_ARBLEN;
+		writel_relaxed(it, i2c_dev->base + SSC_IEN);
+
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STOPG);
+		c->result = -EIO;
+		break;
+
+	default:
+		dev_err(i2c_dev->dev,
+				"it %d unhandled (sta=0x%04x)\n", it, sta);
+	}
+
+	/*
+	 * Read IEN register to ensure interrupt mask write is effective
+	 * before re-enabling interrupt at GIC level, and thus avoid spurious
+	 * interrupts.
+	 */
+	readl(i2c_dev->base + SSC_IEN);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * st_i2c_xfer_msg() - Transfer a single I2C message
+ * @i2c_dev: Controller's private data
+ * @msg: I2C message to transfer
+ * @is_first: first message of the sequence
+ * @is_last: last message of the sequence
+ */
+static int st_i2c_xfer_msg(struct st_i2c_dev *i2c_dev, struct i2c_msg *msg,
+			    bool is_first, bool is_last)
+{
+	struct st_i2c_client *c = &i2c_dev->client;
+	u32 ctl, i2c, it;
+	unsigned long timeout;
+	int ret;
+
+	c->addr		= (u8)(msg->addr << 1);
+	c->addr		|= (msg->flags & I2C_M_RD);
+	c->buf		= msg->buf;
+	c->count	= msg->len;
+	c->xfered	= 0;
+	c->result	= 0;
+	c->stop		= is_last;
+
+	reinit_completion(&i2c_dev->complete);
+
+	ctl = SSC_CTL_EN | SSC_CTL_MS |	SSC_CTL_EN_RX_FIFO | SSC_CTL_EN_TX_FIFO;
+	st_i2c_set_bits(i2c_dev->base + SSC_CTL, ctl);
+
+	i2c = SSC_I2C_TXENB;
+	if (c->addr & I2C_M_RD)
+		i2c |= SSC_I2C_ACKG;
+	st_i2c_set_bits(i2c_dev->base + SSC_I2C, i2c);
+
+	/* Write slave address */
+	st_i2c_write_tx_fifo(i2c_dev, c->addr);
+
+	/* Pre-fill Tx fifo with data in case of write */
+	if (!(c->addr & I2C_M_RD))
+		st_i2c_wr_fill_tx_fifo(i2c_dev);
+
+	it = SSC_IEN_NACKEN | SSC_IEN_TEEN | SSC_IEN_ARBLEN;
+	writel_relaxed(it, i2c_dev->base + SSC_IEN);
+
+	if (is_first) {
+		ret = st_i2c_wait_free_bus(i2c_dev);
+		if (ret)
+			return ret;
+
+		st_i2c_set_bits(i2c_dev->base + SSC_I2C, SSC_I2C_STRTG);
+	}
+
+	timeout = wait_for_completion_timeout(&i2c_dev->complete,
+			i2c_dev->adap.timeout);
+	ret = c->result;
+
+	if (!timeout) {
+		dev_err(i2c_dev->dev, "Write to slave 0x%x timed out\n",
+				c->addr);
+		ret = -ETIMEDOUT;
+	}
+
+	i2c = SSC_I2C_STOPG | SSC_I2C_REPSTRTG;
+	st_i2c_clr_bits(i2c_dev->base + SSC_I2C, i2c);
+
+	writel_relaxed(SSC_CLR_SSCSTOP | SSC_CLR_REPSTRT,
+			i2c_dev->base + SSC_CLR);
+
+	return ret;
+}
+
+/**
+ * st_i2c_xfer() - Transfer a single I2C message
+ * @i2c_adap: Adapter pointer to the controller
+ * @msgs: Pointer to data to be written.
+ * @num: Number of messages to be executed
+ */
+static int st_i2c_xfer(struct i2c_adapter *i2c_adap,
+			struct i2c_msg msgs[], int num)
+{
+	struct st_i2c_dev *i2c_dev = i2c_get_adapdata(i2c_adap);
+	int ret, i;
+
+	i2c_dev->busy = true;
+
+	ret = clk_prepare_enable(i2c_dev->clk);
+	if (ret) {
+		dev_err(i2c_dev->dev, "Failed to prepare_enable clock\n");
+		return ret;
+	}
+
+	pinctrl_pm_select_default_state(i2c_dev->dev);
+
+	st_i2c_hw_config(i2c_dev);
+
+	for (i = 0; (i < num) && !ret; i++)
+		ret = st_i2c_xfer_msg(i2c_dev, &msgs[i], i == 0, i == num - 1);
+
+	pinctrl_pm_select_idle_state(i2c_dev->dev);
+
+	clk_disable_unprepare(i2c_dev->clk);
+
+	i2c_dev->busy = false;
+
+	return (ret < 0) ? ret : i;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int st_i2c_suspend(struct device *dev)
+{
+	struct platform_device *pdev =
+		container_of(dev, struct platform_device, dev);
+	struct st_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	if (i2c_dev->busy)
+		return -EBUSY;
+
+	pinctrl_pm_select_sleep_state(dev);
+
+	return 0;
+}
+
+static int st_i2c_resume(struct device *dev)
+{
+	pinctrl_pm_select_default_state(dev);
+	/* Go in idle state if available */
+	pinctrl_pm_select_idle_state(dev);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st_i2c_pm, st_i2c_suspend, st_i2c_resume);
+#define ST_I2C_PM	(&st_i2c_pm)
+#else
+#define ST_I2C_PM	NULL
+#endif
+
+static u32 st_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static struct i2c_algorithm st_i2c_algo = {
+	.master_xfer = st_i2c_xfer,
+	.functionality = st_i2c_func,
+};
+
+static int st_i2c_of_get_deglitch(struct device_node *np,
+		struct st_i2c_dev *i2c_dev)
+{
+	int ret;
+
+	ret = of_property_read_u32(np, "st,i2c-min-scl-pulse-width-us",
+			&i2c_dev->scl_min_width_us);
+	if ((ret == -ENODATA) || (ret == -EOVERFLOW)) {
+		dev_err(i2c_dev->dev, "st,i2c-min-scl-pulse-width-us invalid\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "st,i2c-min-sda-pulse-width-us",
+			&i2c_dev->sda_min_width_us);
+	if ((ret == -ENODATA) || (ret == -EOVERFLOW)) {
+		dev_err(i2c_dev->dev, "st,i2c-min-sda-pulse-width-us invalid\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int st_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct st_i2c_dev *i2c_dev;
+	struct resource *res;
+	u32 clk_rate;
+	struct i2c_adapter *adap;
+	int ret;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	i2c_dev->irq = irq_of_parse_and_map(np, 0);
+	if (!i2c_dev->irq) {
+		dev_err(&pdev->dev, "IRQ missing or invalid\n");
+		return -EINVAL;
+	}
+
+	i2c_dev->clk = of_clk_get_by_name(np, "ssc");
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_err(&pdev->dev, "Unable to request clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+
+	i2c_dev->mode = I2C_MODE_STANDARD;
+	ret = of_property_read_u32(np, "clock-frequency", &clk_rate);
+	if ((!ret) && (clk_rate == 400000))
+		i2c_dev->mode = I2C_MODE_FAST;
+
+	i2c_dev->dev = &pdev->dev;
+
+	ret = devm_request_threaded_irq(&pdev->dev, i2c_dev->irq,
+			NULL, st_i2c_isr_thread,
+			IRQF_ONESHOT, pdev->name, i2c_dev);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request irq %i\n", i2c_dev->irq);
+		return ret;
+	}
+
+	pinctrl_pm_select_default_state(i2c_dev->dev);
+	/* In case idle state available, select it */
+	pinctrl_pm_select_idle_state(i2c_dev->dev);
+
+	ret = st_i2c_of_get_deglitch(np, i2c_dev);
+	if (ret)
+		return ret;
+
+	adap = &i2c_dev->adap;
+	i2c_set_adapdata(adap, i2c_dev);
+	snprintf(adap->name, sizeof(adap->name), "ST I2C(0x%x)", res->start);
+	adap->owner = THIS_MODULE;
+	adap->timeout = 2 * HZ;
+	adap->retries = 0;
+	adap->algo = &st_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&i2c_dev->complete);
+
+	ret = i2c_add_adapter(adap);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to add adapter\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	dev_info(i2c_dev->dev, "%s initialized\n", adap->name);
+
+	return 0;
+}
+
+static int st_i2c_remove(struct platform_device *pdev)
+{
+	struct st_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c_dev->adap);
+
+	return 0;
+}
+
+static struct of_device_id st_i2c_match[] = {
+	{ .compatible = "st,comms-ssc-i2c", },
+	{ .compatible = "st,comms-ssc4-i2c", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, st_i2c_match);
+
+static struct platform_driver st_i2c_driver = {
+	.driver = {
+		.name = "st-i2c",
+		.owner = THIS_MODULE,
+		.of_match_table = st_i2c_match,
+		.pm = ST_I2C_PM,
+	},
+	.probe = st_i2c_probe,
+	.remove = st_i2c_remove,
+};
+
+module_platform_driver(st_i2c_driver);
+
+MODULE_AUTHOR("Maxime Coquelin <maxime.coquelin@st.com>");
+MODULE_DESCRIPTION("STMicroelectronics I2C driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-stu300.c b/drivers/i2c/busses/i2c-stu300.c
index 0a6f941..04a17b9 100644
--- a/drivers/i2c/busses/i2c-stu300.c
+++ b/drivers/i2c/busses/i2c-stu300.c
@@ -859,15 +859,13 @@ static const struct i2c_algorithm stu300_algo = {
 	.functionality	= stu300_func,
 };
 
-static int __init
-stu300_probe(struct platform_device *pdev)
+static int stu300_probe(struct platform_device *pdev)
 {
 	struct stu300_dev *dev;
 	struct i2c_adapter *adap;
 	struct resource *res;
 	int bus_nr;
 	int ret = 0;
-	char clk_name[] = "I2C0";
 
 	dev = devm_kzalloc(&pdev->dev, sizeof(struct stu300_dev), GFP_KERNEL);
 	if (!dev) {
@@ -876,8 +874,7 @@ stu300_probe(struct platform_device *pdev)
 	}
 
 	bus_nr = pdev->id;
-	clk_name[3] += (char)bus_nr;
-	dev->clk = devm_clk_get(&pdev->dev, clk_name);
+	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (IS_ERR(dev->clk)) {
 		dev_err(&pdev->dev, "could not retrieve i2c bus clock\n");
 		return PTR_ERR(dev->clk);
@@ -885,9 +882,6 @@ stu300_probe(struct platform_device *pdev)
 
 	dev->pdev = pdev;
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENOENT;
-
 	dev->virtbase = devm_ioremap_resource(&pdev->dev, res);
 	dev_dbg(&pdev->dev, "initialize bus device I2C%d on virtual "
 		"base %p\n", bus_nr, dev->virtbase);
@@ -923,6 +917,7 @@ stu300_probe(struct platform_device *pdev)
 	adap->nr = bus_nr;
 	adap->algo = &stu300_algo;
 	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
 	i2c_set_adapdata(adap, dev);
 
 	/* i2c device drivers may be active on return from add_adapter() */
@@ -934,10 +929,13 @@ stu300_probe(struct platform_device *pdev)
 	}
 
 	platform_set_drvdata(pdev, dev);
+	dev_info(&pdev->dev, "ST DDC I2C @ %p, irq %d\n",
+		 dev->virtbase, dev->irq);
+
 	return 0;
 }
 
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
 static int stu300_suspend(struct device *device)
 {
 	struct stu300_dev *dev = dev_get_drvdata(device);
@@ -967,8 +965,7 @@ static SIMPLE_DEV_PM_OPS(stu300_pm, stu300_suspend, stu300_resume);
 #define STU300_I2C_PM	NULL
 #endif
 
-static int __exit
-stu300_remove(struct platform_device *pdev)
+static int stu300_remove(struct platform_device *pdev)
 {
 	struct stu300_dev *dev = platform_get_drvdata(pdev);
 
@@ -978,19 +975,26 @@ stu300_remove(struct platform_device *pdev)
 	return 0;
 }
 
+static const struct of_device_id stu300_dt_match[] = {
+	{ .compatible = "st,ddci2c" },
+	{},
+};
+
 static struct platform_driver stu300_i2c_driver = {
 	.driver = {
 		.name	= NAME,
 		.owner	= THIS_MODULE,
 		.pm	= STU300_I2C_PM,
+		.of_match_table = stu300_dt_match,
 	},
-	.remove		= __exit_p(stu300_remove),
+	.probe = stu300_probe,
+	.remove = stu300_remove,
 
 };
 
 static int __init stu300_init(void)
 {
-	return platform_driver_probe(&stu300_i2c_driver, stu300_probe);
+	return platform_driver_register(&stu300_i2c_driver);
 }
 
 static void __exit stu300_exit(void)
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 9aa1b60..e661ede 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -25,7 +25,6 @@
 #include <linux/interrupt.h>
 #include <linux/delay.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
 #include <linux/of_device.h>
 #include <linux/module.h>
 #include <linux/clk/tegra.h>
@@ -545,7 +544,7 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev,
 	i2c_dev->msg_buf_remaining = msg->len;
 	i2c_dev->msg_err = I2C_ERR_NONE;
 	i2c_dev->msg_read = (msg->flags & I2C_M_RD);
-	INIT_COMPLETION(i2c_dev->msg_complete);
+	reinit_completion(&i2c_dev->msg_complete);
 
 	packet_header = (0 << PACKET_HEADER0_HEADER_SIZE_SHIFT) |
 			PACKET_HEADER0_PROTOCOL_I2C |
@@ -802,8 +801,6 @@ static int tegra_i2c_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	of_i2c_register_devices(&i2c_dev->adapter);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-tiny-usb.c b/drivers/i2c/busses/i2c-tiny-usb.c
index 0510636..e7d3b75 100644
--- a/drivers/i2c/busses/i2c-tiny-usb.c
+++ b/drivers/i2c/busses/i2c-tiny-usb.c
@@ -54,12 +54,16 @@ static int usb_write(struct i2c_adapter *adapter, int cmd,
 
 static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
 {
-	unsigned char status;
+	unsigned char *pstatus;
 	struct i2c_msg *pmsg;
-	int i;
+	int i, ret;
 
 	dev_dbg(&adapter->dev, "master xfer %d messages:\n", num);
 
+	pstatus = kmalloc(sizeof(*pstatus), GFP_KERNEL);
+	if (!pstatus)
+		return -ENOMEM;
+
 	for (i = 0 ; i < num ; i++) {
 		int cmd = CMD_I2C_IO;
 
@@ -84,7 +88,8 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
 				     pmsg->buf, pmsg->len) != pmsg->len) {
 				dev_err(&adapter->dev,
 					"failure reading data\n");
-				return -EREMOTEIO;
+				ret = -EREMOTEIO;
+				goto out;
 			}
 		} else {
 			/* write data */
@@ -93,36 +98,50 @@ static int usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
 				      pmsg->buf, pmsg->len) != pmsg->len) {
 				dev_err(&adapter->dev,
 					"failure writing data\n");
-				return -EREMOTEIO;
+				ret = -EREMOTEIO;
+				goto out;
 			}
 		}
 
 		/* read status */
-		if (usb_read(adapter, CMD_GET_STATUS, 0, 0, &status, 1) != 1) {
+		if (usb_read(adapter, CMD_GET_STATUS, 0, 0, pstatus, 1) != 1) {
 			dev_err(&adapter->dev, "failure reading status\n");
-			return -EREMOTEIO;
+			ret = -EREMOTEIO;
+			goto out;
 		}
 
-		dev_dbg(&adapter->dev, "  status = %d\n", status);
-		if (status == STATUS_ADDRESS_NAK)
-			return -EREMOTEIO;
+		dev_dbg(&adapter->dev, "  status = %d\n", *pstatus);
+		if (*pstatus == STATUS_ADDRESS_NAK) {
+			ret = -EREMOTEIO;
+			goto out;
+		}
 	}
 
-	return i;
+	ret = i;
+out:
+	kfree(pstatus);
+	return ret;
 }
 
 static u32 usb_func(struct i2c_adapter *adapter)
 {
-	__le32 func;
+	__le32 *pfunc;
+	u32 ret;
+
+	pfunc = kmalloc(sizeof(*pfunc), GFP_KERNEL);
 
 	/* get functionality from adapter */
-	if (usb_read(adapter, CMD_GET_FUNC, 0, 0, &func, sizeof(func)) !=
-	    sizeof(func)) {
+	if (!pfunc || usb_read(adapter, CMD_GET_FUNC, 0, 0, pfunc,
+			       sizeof(*pfunc)) != sizeof(*pfunc)) {
 		dev_err(&adapter->dev, "failure reading functionality\n");
-		return 0;
+		ret = 0;
+		goto out;
 	}
 
-	return le32_to_cpu(func);
+	ret = le32_to_cpup(pfunc);
+out:
+	kfree(pfunc);
+	return ret;
 }
 
 /* This is the actual algorithm we define */
diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c
index f3a8790..6bb3a89 100644
--- a/drivers/i2c/busses/i2c-versatile.c
+++ b/drivers/i2c/busses/i2c-versatile.c
@@ -16,7 +16,6 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/io.h>
-#include <linux/of_i2c.h>
 
 #define I2C_CONTROL	0x00
 #define I2C_CONTROLS	0x00
@@ -108,7 +107,6 @@ static int i2c_versatile_probe(struct platform_device *dev)
 	ret = i2c_bit_add_numbered_bus(&i2c->adap);
 	if (ret >= 0) {
 		platform_set_drvdata(dev, i2c);
-		of_i2c_register_devices(&i2c->adap);
 		return 0;
 	}
 
diff --git a/drivers/i2c/busses/i2c-wmt.c b/drivers/i2c/busses/i2c-wmt.c
new file mode 100644
index 0000000..2c8a3e4
--- /dev/null
+++ b/drivers/i2c/busses/i2c-wmt.c
@@ -0,0 +1,477 @@
+/*
+ *  Wondermedia I2C Master Mode Driver
+ *
+ *  Copyright (C) 2012 Tony Prisk <linux@prisktech.co.nz>
+ *
+ *  Derived from GPLv2+ licensed source:
+ *  - Copyright (C) 2008 WonderMedia Technologies, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2, or
+ *  (at your option) any later version. as published by the Free Software
+ *  Foundation
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+
+#define REG_CR		0x00
+#define REG_TCR		0x02
+#define REG_CSR		0x04
+#define REG_ISR		0x06
+#define REG_IMR		0x08
+#define REG_CDR		0x0A
+#define REG_TR		0x0C
+#define REG_MCR		0x0E
+#define REG_SLAVE_CR	0x10
+#define REG_SLAVE_SR	0x12
+#define REG_SLAVE_ISR	0x14
+#define REG_SLAVE_IMR	0x16
+#define REG_SLAVE_DR	0x18
+#define REG_SLAVE_TR	0x1A
+
+/* REG_CR Bit fields */
+#define CR_TX_NEXT_ACK		0x0000
+#define CR_ENABLE		0x0001
+#define CR_TX_NEXT_NO_ACK	0x0002
+#define CR_TX_END		0x0004
+#define CR_CPU_RDY		0x0008
+#define SLAV_MODE_SEL		0x8000
+
+/* REG_TCR Bit fields */
+#define TCR_STANDARD_MODE	0x0000
+#define TCR_MASTER_WRITE	0x0000
+#define TCR_HS_MODE		0x2000
+#define TCR_MASTER_READ		0x4000
+#define TCR_FAST_MODE		0x8000
+#define TCR_SLAVE_ADDR_MASK	0x007F
+
+/* REG_ISR Bit fields */
+#define ISR_NACK_ADDR		0x0001
+#define ISR_BYTE_END		0x0002
+#define ISR_SCL_TIMEOUT		0x0004
+#define ISR_WRITE_ALL		0x0007
+
+/* REG_IMR Bit fields */
+#define IMR_ENABLE_ALL		0x0007
+
+/* REG_CSR Bit fields */
+#define CSR_RCV_NOT_ACK		0x0001
+#define CSR_RCV_ACK_MASK	0x0001
+#define CSR_READY_MASK		0x0002
+
+/* REG_TR */
+#define SCL_TIMEOUT(x)		(((x) & 0xFF) << 8)
+#define TR_STD			0x0064
+#define TR_HS			0x0019
+
+/* REG_MCR */
+#define MCR_APB_96M		7
+#define MCR_APB_166M		12
+
+#define I2C_MODE_STANDARD	0
+#define I2C_MODE_FAST		1
+
+#define WMT_I2C_TIMEOUT		(msecs_to_jiffies(1000))
+
+struct wmt_i2c_dev {
+	struct i2c_adapter	adapter;
+	struct completion	complete;
+	struct device		*dev;
+	void __iomem		*base;
+	struct clk		*clk;
+	int			mode;
+	int			irq;
+	u16			cmd_status;
+};
+
+static int wmt_i2c_wait_bus_not_busy(struct wmt_i2c_dev *i2c_dev)
+{
+	unsigned long timeout;
+
+	timeout = jiffies + WMT_I2C_TIMEOUT;
+	while (!(readw(i2c_dev->base + REG_CSR) & CSR_READY_MASK)) {
+		if (time_after(jiffies, timeout)) {
+			dev_warn(i2c_dev->dev, "timeout waiting for bus ready\n");
+			return -EBUSY;
+		}
+		msleep(20);
+	}
+
+	return 0;
+}
+
+static int wmt_check_status(struct wmt_i2c_dev *i2c_dev)
+{
+	int ret = 0;
+
+	if (i2c_dev->cmd_status & ISR_NACK_ADDR)
+		ret = -EIO;
+
+	if (i2c_dev->cmd_status & ISR_SCL_TIMEOUT)
+		ret = -ETIMEDOUT;
+
+	return ret;
+}
+
+static int wmt_i2c_write(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+			 int last)
+{
+	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u16 val, tcr_val;
+	int ret, wait_result;
+	int xfer_len = 0;
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	if (pmsg->len == 0) {
+		/*
+		 * We still need to run through the while (..) once, so
+		 * start at -1 and break out early from the loop
+		 */
+		xfer_len = -1;
+		writew(0, i2c_dev->base + REG_CDR);
+	} else {
+		writew(pmsg->buf[0] & 0xFF, i2c_dev->base + REG_CDR);
+	}
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		val = readw(i2c_dev->base + REG_CR);
+		val &= ~CR_TX_END;
+		writew(val, i2c_dev->base + REG_CR);
+
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	reinit_completion(&i2c_dev->complete);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		tcr_val = TCR_STANDARD_MODE;
+	else
+		tcr_val = TCR_FAST_MODE;
+
+	tcr_val |= (TCR_MASTER_WRITE | (pmsg->addr & TCR_SLAVE_ADDR_MASK));
+
+	writew(tcr_val, i2c_dev->base + REG_TCR);
+
+	if (pmsg->flags & I2C_M_NOSTART) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	while (xfer_len < pmsg->len) {
+		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+							  500 * HZ / 1000);
+
+		if (wait_result == 0)
+			return -ETIMEDOUT;
+
+		ret = wmt_check_status(i2c_dev);
+		if (ret)
+			return ret;
+
+		xfer_len++;
+
+		val = readw(i2c_dev->base + REG_CSR);
+		if ((val & CSR_RCV_ACK_MASK) == CSR_RCV_NOT_ACK) {
+			dev_dbg(i2c_dev->dev, "write RCV NACK error\n");
+			return -EIO;
+		}
+
+		if (pmsg->len == 0) {
+			val = CR_TX_END | CR_CPU_RDY | CR_ENABLE;
+			writew(val, i2c_dev->base + REG_CR);
+			break;
+		}
+
+		if (xfer_len == pmsg->len) {
+			if (last != 1)
+				writew(CR_ENABLE, i2c_dev->base + REG_CR);
+		} else {
+			writew(pmsg->buf[xfer_len] & 0xFF, i2c_dev->base +
+								REG_CDR);
+			writew(CR_CPU_RDY | CR_ENABLE, i2c_dev->base + REG_CR);
+		}
+	}
+
+	return 0;
+}
+
+static int wmt_i2c_read(struct i2c_adapter *adap, struct i2c_msg *pmsg,
+			int last)
+{
+	struct wmt_i2c_dev *i2c_dev = i2c_get_adapdata(adap);
+	u16 val, tcr_val;
+	int ret, wait_result;
+	u32 xfer_len = 0;
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		ret = wmt_i2c_wait_bus_not_busy(i2c_dev);
+		if (ret < 0)
+			return ret;
+	}
+
+	val = readw(i2c_dev->base + REG_CR);
+	val &= ~CR_TX_END;
+	writew(val, i2c_dev->base + REG_CR);
+
+	val = readw(i2c_dev->base + REG_CR);
+	val &= ~CR_TX_NEXT_NO_ACK;
+	writew(val, i2c_dev->base + REG_CR);
+
+	if (!(pmsg->flags & I2C_M_NOSTART)) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	if (pmsg->len == 1) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_TX_NEXT_NO_ACK;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	reinit_completion(&i2c_dev->complete);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		tcr_val = TCR_STANDARD_MODE;
+	else
+		tcr_val = TCR_FAST_MODE;
+
+	tcr_val |= TCR_MASTER_READ | (pmsg->addr & TCR_SLAVE_ADDR_MASK);
+
+	writew(tcr_val, i2c_dev->base + REG_TCR);
+
+	if (pmsg->flags & I2C_M_NOSTART) {
+		val = readw(i2c_dev->base + REG_CR);
+		val |= CR_CPU_RDY;
+		writew(val, i2c_dev->base + REG_CR);
+	}
+
+	while (xfer_len < pmsg->len) {
+		wait_result = wait_for_completion_timeout(&i2c_dev->complete,
+							  500 * HZ / 1000);
+
+		if (!wait_result)
+			return -ETIMEDOUT;
+
+		ret = wmt_check_status(i2c_dev);
+		if (ret)
+			return ret;
+
+		pmsg->buf[xfer_len] = readw(i2c_dev->base + REG_CDR) >> 8;
+		xfer_len++;
+
+		if (xfer_len == pmsg->len - 1) {
+			val = readw(i2c_dev->base + REG_CR);
+			val |= (CR_TX_NEXT_NO_ACK | CR_CPU_RDY);
+			writew(val, i2c_dev->base + REG_CR);
+		} else {
+			val = readw(i2c_dev->base + REG_CR);
+			val |= CR_CPU_RDY;
+			writew(val, i2c_dev->base + REG_CR);
+		}
+	}
+
+	return 0;
+}
+
+static int wmt_i2c_xfer(struct i2c_adapter *adap,
+			struct i2c_msg msgs[],
+			int num)
+{
+	struct i2c_msg *pmsg;
+	int i, is_last;
+	int ret = 0;
+
+	for (i = 0; ret >= 0 && i < num; i++) {
+		is_last = ((i + 1) == num);
+
+		pmsg = &msgs[i];
+		if (pmsg->flags & I2C_M_RD)
+			ret = wmt_i2c_read(adap, pmsg, is_last);
+		else
+			ret = wmt_i2c_write(adap, pmsg, is_last);
+	}
+
+	return (ret < 0) ? ret : i;
+}
+
+static u32 wmt_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_NOSTART;
+}
+
+static const struct i2c_algorithm wmt_i2c_algo = {
+	.master_xfer	= wmt_i2c_xfer,
+	.functionality	= wmt_i2c_func,
+};
+
+static irqreturn_t wmt_i2c_isr(int irq, void *data)
+{
+	struct wmt_i2c_dev *i2c_dev = data;
+
+	/* save the status and write-clear it */
+	i2c_dev->cmd_status = readw(i2c_dev->base + REG_ISR);
+	writew(i2c_dev->cmd_status, i2c_dev->base + REG_ISR);
+
+	complete(&i2c_dev->complete);
+
+	return IRQ_HANDLED;
+}
+
+static int wmt_i2c_reset_hardware(struct wmt_i2c_dev *i2c_dev)
+{
+	int err;
+
+	err = clk_prepare_enable(i2c_dev->clk);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to enable clock\n");
+		return err;
+	}
+
+	err = clk_set_rate(i2c_dev->clk, 20000000);
+	if (err) {
+		dev_err(i2c_dev->dev, "failed to set clock = 20Mhz\n");
+		clk_disable_unprepare(i2c_dev->clk);
+		return err;
+	}
+
+	writew(0, i2c_dev->base + REG_CR);
+	writew(MCR_APB_166M, i2c_dev->base + REG_MCR);
+	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+	writew(IMR_ENABLE_ALL, i2c_dev->base + REG_IMR);
+	writew(CR_ENABLE, i2c_dev->base + REG_CR);
+	readw(i2c_dev->base + REG_CSR);		/* read clear */
+	writew(ISR_WRITE_ALL, i2c_dev->base + REG_ISR);
+
+	if (i2c_dev->mode == I2C_MODE_STANDARD)
+		writew(SCL_TIMEOUT(128) | TR_STD, i2c_dev->base + REG_TR);
+	else
+		writew(SCL_TIMEOUT(128) | TR_HS, i2c_dev->base + REG_TR);
+
+	return 0;
+}
+
+static int wmt_i2c_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct wmt_i2c_dev *i2c_dev;
+	struct i2c_adapter *adap;
+	struct resource *res;
+	int err;
+	u32 clk_rate;
+
+	i2c_dev = devm_kzalloc(&pdev->dev, sizeof(*i2c_dev), GFP_KERNEL);
+	if (!i2c_dev) {
+		dev_err(&pdev->dev, "device memory allocation failed\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c_dev->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c_dev->base))
+		return PTR_ERR(i2c_dev->base);
+
+	i2c_dev->irq = irq_of_parse_and_map(np, 0);
+	if (!i2c_dev->irq) {
+		dev_err(&pdev->dev, "irq missing or invalid\n");
+		return -EINVAL;
+	}
+
+	i2c_dev->clk = of_clk_get(np, 0);
+	if (IS_ERR(i2c_dev->clk)) {
+		dev_err(&pdev->dev, "unable to request clock\n");
+		return PTR_ERR(i2c_dev->clk);
+	}
+
+	i2c_dev->mode = I2C_MODE_STANDARD;
+	err = of_property_read_u32(np, "clock-frequency", &clk_rate);
+	if ((!err) && (clk_rate == 400000))
+		i2c_dev->mode = I2C_MODE_FAST;
+
+	i2c_dev->dev = &pdev->dev;
+
+	err = devm_request_irq(&pdev->dev, i2c_dev->irq, wmt_i2c_isr, 0,
+							"i2c", i2c_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to request irq %i\n", i2c_dev->irq);
+		return err;
+	}
+
+	adap = &i2c_dev->adapter;
+	i2c_set_adapdata(adap, i2c_dev);
+	strlcpy(adap->name, "WMT I2C adapter", sizeof(adap->name));
+	adap->owner = THIS_MODULE;
+	adap->algo = &wmt_i2c_algo;
+	adap->dev.parent = &pdev->dev;
+	adap->dev.of_node = pdev->dev.of_node;
+
+	init_completion(&i2c_dev->complete);
+
+	err = wmt_i2c_reset_hardware(i2c_dev);
+	if (err) {
+		dev_err(&pdev->dev, "error initializing hardware\n");
+		return err;
+	}
+
+	err = i2c_add_adapter(adap);
+	if (err) {
+		dev_err(&pdev->dev, "failed to add adapter\n");
+		return err;
+	}
+
+	platform_set_drvdata(pdev, i2c_dev);
+
+	return 0;
+}
+
+static int wmt_i2c_remove(struct platform_device *pdev)
+{
+	struct wmt_i2c_dev *i2c_dev = platform_get_drvdata(pdev);
+
+	/* Disable interrupts, clock and delete adapter */
+	writew(0, i2c_dev->base + REG_IMR);
+	clk_disable_unprepare(i2c_dev->clk);
+	i2c_del_adapter(&i2c_dev->adapter);
+
+	return 0;
+}
+
+static struct of_device_id wmt_i2c_dt_ids[] = {
+	{ .compatible = "wm,wm8505-i2c" },
+	{ /* Sentinel */ },
+};
+
+static struct platform_driver wmt_i2c_driver = {
+	.probe		= wmt_i2c_probe,
+	.remove		= wmt_i2c_remove,
+	.driver		= {
+		.name	= "wmt-i2c",
+		.owner	= THIS_MODULE,
+		.of_match_table = wmt_i2c_dt_ids,
+	},
+};
+
+module_platform_driver(wmt_i2c_driver);
+
+MODULE_DESCRIPTION("Wondermedia I2C master-mode bus adapter");
+MODULE_AUTHOR("Tony Prisk <linux@prisktech.co.nz>");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(of, wmt_i2c_dt_ids);
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
index 3d0f052..fc2716a 100644
--- a/drivers/i2c/busses/i2c-xiic.c
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -40,7 +40,7 @@
 #include <linux/i2c-xiic.h>
 #include <linux/io.h>
 #include <linux/slab.h>
-#include <linux/of_i2c.h>
+#include <linux/of.h>
 
 #define DRIVER_NAME "xiic-i2c"
 
@@ -703,7 +703,7 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 	if (irq < 0)
 		goto resource_missing;
 
-	pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
+	pdata = dev_get_platdata(&pdev->dev);
 
 	i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
 	if (!i2c)
@@ -752,8 +752,6 @@ static int xiic_i2c_probe(struct platform_device *pdev)
 			i2c_new_device(&i2c->adap, pdata->devices + i);
 	}
 
-	of_i2c_register_devices(&i2c->adap);
-
 	return 0;
 
 add_adapter_failed:
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 48e31ed..d74c0b3 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -23,7 +23,11 @@
    SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
    Jean Delvare <khali@linux-fr.org>
    Mux support by Rodolfo Giometti <giometti@enneenne.com> and
-   Michael Lawnick <michael.lawnick.ext@nsn.com> */
+   Michael Lawnick <michael.lawnick.ext@nsn.com>
+   OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
+   (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
+   (c) 2013  Wolfram Sang <wsa@the-dreams.de>
+ */
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -35,7 +39,9 @@
 #include <linux/init.h>
 #include <linux/idr.h>
 #include <linux/mutex.h>
+#include <linux/of.h>
 #include <linux/of_device.h>
+#include <linux/of_irq.h>
 #include <linux/completion.h>
 #include <linux/hardirq.h>
 #include <linux/irqflags.h>
@@ -242,16 +248,17 @@ static int i2c_device_probe(struct device *dev)
 	driver = to_i2c_driver(dev->driver);
 	if (!driver->probe || !driver->id_table)
 		return -ENODEV;
-	client->driver = driver;
+
 	if (!device_can_wakeup(&client->dev))
 		device_init_wakeup(&client->dev,
 					client->flags & I2C_CLIENT_WAKE);
 	dev_dbg(dev, "probe\n");
 
+	acpi_dev_pm_attach(&client->dev, true);
 	status = driver->probe(client, i2c_match_id(driver->id_table, client));
 	if (status) {
-		client->driver = NULL;
 		i2c_set_clientdata(client, NULL);
+		acpi_dev_pm_detach(&client->dev, true);
 	}
 	return status;
 }
@@ -273,10 +280,9 @@ static int i2c_device_remove(struct device *dev)
 		dev->driver = NULL;
 		status = 0;
 	}
-	if (status == 0) {
-		client->driver = NULL;
+	if (status == 0)
 		i2c_set_clientdata(client, NULL);
-	}
+	acpi_dev_pm_detach(&client->dev, true);
 	return status;
 }
 
@@ -435,7 +441,7 @@ static const struct dev_pm_ops i2c_device_pm_ops = {
 	SET_RUNTIME_PM_OPS(
 		pm_generic_runtime_suspend,
 		pm_generic_runtime_resume,
-		pm_generic_runtime_idle
+		NULL
 	)
 };
 
@@ -609,6 +615,22 @@ void i2c_unlock_adapter(struct i2c_adapter *adapter)
 }
 EXPORT_SYMBOL_GPL(i2c_unlock_adapter);
 
+static void i2c_dev_set_name(struct i2c_adapter *adap,
+			     struct i2c_client *client)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&client->dev);
+
+	if (adev) {
+		dev_set_name(&client->dev, "i2c-%s", acpi_dev_name(adev));
+		return;
+	}
+
+	/* For 10-bit clients, add an arbitrary offset to avoid collisions */
+	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
+		     client->addr | ((client->flags & I2C_CLIENT_TEN)
+				     ? 0xa000 : 0));
+}
+
 /**
  * i2c_new_device - instantiate an i2c device
  * @adap: the adapter managing the device
@@ -665,12 +687,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info)
 	client->dev.bus = &i2c_bus_type;
 	client->dev.type = &i2c_client_type;
 	client->dev.of_node = info->of_node;
-	ACPI_HANDLE_SET(&client->dev, info->acpi_node.handle);
+	ACPI_COMPANION_SET(&client->dev, info->acpi_node.companion);
 
-	/* For 10-bit clients, add an arbitrary offset to avoid collisions */
-	dev_set_name(&client->dev, "%d-%04x", i2c_adapter_id(adap),
-		     client->addr | ((client->flags & I2C_CLIENT_TEN)
-				     ? 0xa000 : 0));
+	i2c_dev_set_name(adap, client);
 	status = device_register(&client->dev);
 	if (status)
 		goto out_err;
@@ -954,6 +973,199 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
 	up_read(&__i2c_board_lock);
 }
 
+/* OF support code */
+
+#if IS_ENABLED(CONFIG_OF)
+static void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+	void *result;
+	struct device_node *node;
+
+	/* Only register child devices if the adapter has a node pointer set */
+	if (!adap->dev.of_node)
+		return;
+
+	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+	for_each_available_child_of_node(adap->dev.of_node, node) {
+		struct i2c_board_info info = {};
+		struct dev_archdata dev_ad = {};
+		const __be32 *addr;
+		int len;
+
+		dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+
+		if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+			dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
+				node->full_name);
+			continue;
+		}
+
+		addr = of_get_property(node, "reg", &len);
+		if (!addr || (len < sizeof(int))) {
+			dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
+				node->full_name);
+			continue;
+		}
+
+		info.addr = be32_to_cpup(addr);
+		if (info.addr > (1 << 10) - 1) {
+			dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
+				info.addr, node->full_name);
+			continue;
+		}
+
+		info.irq = irq_of_parse_and_map(node, 0);
+		info.of_node = of_node_get(node);
+		info.archdata = &dev_ad;
+
+		if (of_get_property(node, "wakeup-source", NULL))
+			info.flags |= I2C_CLIENT_WAKE;
+
+		request_module("%s%s", I2C_MODULE_PREFIX, info.type);
+
+		result = i2c_new_device(adap, &info);
+		if (result == NULL) {
+			dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
+				node->full_name);
+			of_node_put(node);
+			irq_dispose_mapping(info.irq);
+			continue;
+		}
+	}
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node,
+					 of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	return i2c_verify_client(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node,
+					 of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	return i2c_verify_adapter(dev);
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+#else
+static void of_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_OF */
+
+/* ACPI support code */
+
+#if IS_ENABLED(CONFIG_ACPI)
+static int acpi_i2c_add_resource(struct acpi_resource *ares, void *data)
+{
+	struct i2c_board_info *info = data;
+
+	if (ares->type == ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		struct acpi_resource_i2c_serialbus *sb;
+
+		sb = &ares->data.i2c_serial_bus;
+		if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+			info->addr = sb->slave_address;
+			if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+				info->flags |= I2C_CLIENT_TEN;
+		}
+	} else if (info->irq < 0) {
+		struct resource r;
+
+		if (acpi_dev_resource_interrupt(ares, 0, &r))
+			info->irq = r.start;
+	}
+
+	/* Tell the ACPI core to skip this resource */
+	return 1;
+}
+
+static acpi_status acpi_i2c_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct list_head resource_list;
+	struct i2c_board_info info;
+	struct acpi_device *adev;
+	int ret;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+	if (acpi_bus_get_status(adev) || !adev->status.present)
+		return AE_OK;
+
+	memset(&info, 0, sizeof(info));
+	info.acpi_node.companion = adev;
+	info.irq = -1;
+
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     acpi_i2c_add_resource, &info);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info.addr)
+		return AE_OK;
+
+	adev->power.flags.ignore_parent = true;
+	strlcpy(info.type, dev_name(&adev->dev), sizeof(info.type));
+	if (!i2c_new_device(adapter, &info)) {
+		adev->power.flags.ignore_parent = false;
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+
+	return AE_OK;
+}
+
+/**
+ * acpi_i2c_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+static void acpi_i2c_register_devices(struct i2c_adapter *adap)
+{
+	acpi_handle handle;
+	acpi_status status;
+
+	if (!adap->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adap->dev.parent);
+	if (!handle)
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, 1,
+				     acpi_i2c_add_device, NULL,
+				     adap, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+#else
+static inline void acpi_i2c_register_devices(struct i2c_adapter *adap) {}
+#endif /* CONFIG_ACPI */
+
 static int i2c_do_add_adapter(struct i2c_driver *driver,
 			      struct i2c_adapter *adap)
 {
@@ -1058,6 +1270,9 @@ static int i2c_register_adapter(struct i2c_adapter *adap)
 
 exit_recovery:
 	/* create pre-declared device nodes */
+	of_i2c_register_devices(adap);
+	acpi_i2c_register_devices(adap);
+
 	if (adap->nr < __i2c_first_dynamic_bus_num)
 		i2c_scan_static_board_info(adap);
 
@@ -1282,7 +1497,6 @@ void i2c_del_adapter(struct i2c_adapter *adap)
 }
 EXPORT_SYMBOL(i2c_del_adapter);
 
-
 /* ------------------------------------------------------------------------- */
 
 int i2c_for_each_dev(void *data, int (*fn)(struct device *, void *))
@@ -1410,9 +1624,14 @@ static int i2c_cmd(struct device *dev, void *_arg)
 {
 	struct i2c_client	*client = i2c_verify_client(dev);
 	struct i2c_cmd_arg	*arg = _arg;
+	struct i2c_driver	*driver;
 
-	if (client && client->driver && client->driver->command)
-		client->driver->command(client, arg->cmd, arg->arg);
+	if (!client || !client->dev.driver)
+		return 0;
+
+	driver = to_i2c_driver(client->dev.driver);
+	if (driver->command)
+		driver->command(client, arg->cmd, arg->arg);
 	return 0;
 }
 
@@ -1665,7 +1884,8 @@ static int i2c_default_probe(struct i2c_adapter *adap, unsigned short addr)
 		err = i2c_smbus_xfer(adap, addr, 0, I2C_SMBUS_READ, 0,
 				     I2C_SMBUS_BYTE, &dummy);
 	else {
-		dev_warn(&adap->dev, "No suitable probing method supported\n");
+		dev_warn(&adap->dev, "No suitable probing method supported for address 0x%02X\n",
+			 addr);
 		err = -EOPNOTSUPP;
 	}
 
@@ -1825,7 +2045,8 @@ EXPORT_SYMBOL(i2c_get_adapter);
 
 void i2c_put_adapter(struct i2c_adapter *adap)
 {
-	module_put(adap->owner);
+	if (adap)
+		module_put(adap->owner);
 }
 EXPORT_SYMBOL(i2c_put_adapter);
 
diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c
index c3ccdea..80b47e8 100644
--- a/drivers/i2c/i2c-dev.c
+++ b/drivers/i2c/i2c-dev.c
@@ -102,8 +102,8 @@ static void return_i2c_dev(struct i2c_dev *i2c_dev)
 	kfree(i2c_dev);
 }
 
-static ssize_t show_adapter_name(struct device *dev,
-				 struct device_attribute *attr, char *buf)
+static ssize_t name_show(struct device *dev,
+			 struct device_attribute *attr, char *buf)
 {
 	struct i2c_dev *i2c_dev = i2c_dev_get_by_minor(MINOR(dev->devt));
 
@@ -111,7 +111,13 @@ static ssize_t show_adapter_name(struct device *dev,
 		return -ENODEV;
 	return sprintf(buf, "%s\n", i2c_dev->adap->name);
 }
-static DEVICE_ATTR(name, S_IRUGO, show_adapter_name, NULL);
+static DEVICE_ATTR_RO(name);
+
+static struct attribute *i2c_attrs[] = {
+	&dev_attr_name.attr,
+	NULL,
+};
+ATTRIBUTE_GROUPS(i2c);
 
 /* ------------------------------------------------------------------------- */
 
@@ -562,15 +568,10 @@ static int i2cdev_attach_adapter(struct device *dev, void *dummy)
 		res = PTR_ERR(i2c_dev->dev);
 		goto error;
 	}
-	res = device_create_file(i2c_dev->dev, &dev_attr_name);
-	if (res)
-		goto error_destroy;
 
 	pr_debug("i2c-dev: adapter [%s] registered as minor %d\n",
 		 adap->name, adap->nr);
 	return 0;
-error_destroy:
-	device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
 error:
 	return_i2c_dev(i2c_dev);
 	return res;
@@ -589,7 +590,6 @@ static int i2cdev_detach_adapter(struct device *dev, void *dummy)
 	if (!i2c_dev) /* attach_adapter must have failed */
 		return 0;
 
-	device_remove_file(i2c_dev->dev, &dev_attr_name);
 	return_i2c_dev(i2c_dev);
 	device_destroy(i2c_dev_class, MKDEV(I2C_MAJOR, adap->nr));
 
@@ -637,6 +637,7 @@ static int __init i2c_dev_init(void)
 		res = PTR_ERR(i2c_dev_class);
 		goto out_unreg_chrdev;
 	}
+	i2c_dev_class->dev_groups = i2c_groups;
 
 	/* Keep track of adapters which will be added or removed later */
 	res = bus_register_notifier(&i2c_bus_type, &i2cdev_notifier);
diff --git a/drivers/i2c/i2c-mux.c b/drivers/i2c/i2c-mux.c
index 7409ebb..797e311 100644
--- a/drivers/i2c/i2c-mux.c
+++ b/drivers/i2c/i2c-mux.c
@@ -25,7 +25,6 @@
 #include <linux/i2c.h>
 #include <linux/i2c-mux.h>
 #include <linux/of.h>
-#include <linux/of_i2c.h>
 
 /* multiplexer per channel data */
 struct i2c_mux_priv {
@@ -185,8 +184,6 @@ struct i2c_adapter *i2c_add_mux_adapter(struct i2c_adapter *parent,
 	dev_info(&parent->dev, "Added multiplexed i2c bus %d\n",
 		 i2c_adapter_id(&priv->adap));
 
-	of_i2c_register_devices(&priv->adap);
-
 	return &priv->adap;
 }
 EXPORT_SYMBOL_GPL(i2c_add_mux_adapter);
diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c
index 92cdd23..c99b229 100644
--- a/drivers/i2c/i2c-smbus.c
+++ b/drivers/i2c/i2c-smbus.c
@@ -46,6 +46,7 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 {
 	struct i2c_client *client = i2c_verify_client(dev);
 	struct alert_data *data = addrp;
+	struct i2c_driver *driver;
 
 	if (!client || client->addr != data->addr)
 		return 0;
@@ -54,12 +55,13 @@ static int smbus_do_alert(struct device *dev, void *addrp)
 
 	/*
 	 * Drivers should either disable alerts, or provide at least
-	 * a minimal handler.  Lock so client->driver won't change.
+	 * a minimal handler.  Lock so the driver won't change.
 	 */
 	device_lock(dev);
-	if (client->driver) {
-		if (client->driver->alert)
-			client->driver->alert(client, data->flag);
+	if (client->dev.driver) {
+		driver = to_i2c_driver(client->dev.driver);
+		if (driver->alert)
+			driver->alert(client, data->flag);
 		else
 			dev_warn(&client->dev, "no driver alert()!\n");
 	} else
@@ -137,7 +139,7 @@ static irqreturn_t smbalert_irq(int irq, void *d)
 static int smbalert_probe(struct i2c_client *ara,
 			  const struct i2c_device_id *id)
 {
-	struct i2c_smbus_alert_setup *setup = ara->dev.platform_data;
+	struct i2c_smbus_alert_setup *setup = dev_get_platdata(&ara->dev);
 	struct i2c_smbus_alert *alert;
 	struct i2c_adapter *adapter = ara->adapter;
 	int res;
diff --git a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
index 210b6f7..c58e093 100644
--- a/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
+++ b/drivers/i2c/muxes/i2c-arb-gpio-challenge.c
@@ -21,7 +21,6 @@
 #include <linux/i2c-mux.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
 #include <linux/of_gpio.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
@@ -131,7 +130,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
 		dev_err(dev, "Cannot find device tree node\n");
 		return -ENODEV;
 	}
-	if (dev->platform_data) {
+	if (dev_get_platdata(dev)) {
 		dev_err(dev, "Platform data is not supported\n");
 		return -EINVAL;
 	}
@@ -201,7 +200,7 @@ static int i2c_arbitrator_probe(struct platform_device *pdev)
 	arb->parent = of_find_i2c_adapter_by_node(parent_np);
 	if (!arb->parent) {
 		dev_err(dev, "Cannot find parent bus\n");
-		return -EINVAL;
+		return -EPROBE_DEFER;
 	}
 
 	/* Actually add the mux adapter */
@@ -239,7 +238,7 @@ static struct platform_driver i2c_arbitrator_driver = {
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= "i2c-arb-gpio-challenge",
-		.of_match_table = of_match_ptr(i2c_arbitrator_of_match),
+		.of_match_table = i2c_arbitrator_of_match,
 	},
 };
 
diff --git a/drivers/i2c/muxes/i2c-mux-gpio.c b/drivers/i2c/muxes/i2c-mux-gpio.c
index 5a0ce00..8a8c56f 100644
--- a/drivers/i2c/muxes/i2c-mux-gpio.c
+++ b/drivers/i2c/muxes/i2c-mux-gpio.c
@@ -16,7 +16,6 @@
 #include <linux/module.h>
 #include <linux/slab.h>
 #include <linux/gpio.h>
-#include <linux/of_i2c.h>
 #include <linux/of_gpio.h>
 
 struct gpiomux {
@@ -31,15 +30,15 @@ static void i2c_mux_gpio_set(const struct gpiomux *mux, unsigned val)
 	int i;
 
 	for (i = 0; i < mux->data.n_gpios; i++)
-		gpio_set_value(mux->gpio_base + mux->data.gpios[i],
-			       val & (1 << i));
+		gpio_set_value_cansleep(mux->gpio_base + mux->data.gpios[i],
+					val & (1 << i));
 }
 
 static int i2c_mux_gpio_select(struct i2c_adapter *adap, void *data, u32 chan)
 {
 	struct gpiomux *mux = data;
 
-	i2c_mux_gpio_set(mux, mux->data.values[chan]);
+	i2c_mux_gpio_set(mux, chan);
 
 	return 0;
 }
@@ -67,7 +66,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
 	struct device_node *adapter_np, *child;
 	struct i2c_adapter *adapter;
 	unsigned *values, *gpios;
-	int i = 0;
+	int i = 0, ret;
 
 	if (!np)
 		return -ENODEV;
@@ -80,7 +79,7 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
 	adapter = of_find_i2c_adapter_by_node(adapter_np);
 	if (!adapter) {
 		dev_err(&pdev->dev, "Cannot find parent bus\n");
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 	mux->data.parent = i2c_adapter_id(adapter);
 	put_device(&adapter->dev);
@@ -117,8 +116,12 @@ static int i2c_mux_gpio_probe_dt(struct gpiomux *mux,
 		return -ENOMEM;
 	}
 
-	for (i = 0; i < mux->data.n_gpios; i++)
-		gpios[i] = of_get_named_gpio(np, "mux-gpios", i);
+	for (i = 0; i < mux->data.n_gpios; i++) {
+		ret = of_get_named_gpio(np, "mux-gpios", i);
+		if (ret < 0)
+			return ret;
+		gpios[i] = ret;
+	}
 
 	mux->data.gpios = gpios;
 
@@ -148,12 +151,14 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, mux);
 
-	if (!pdev->dev.platform_data) {
+	if (!dev_get_platdata(&pdev->dev)) {
 		ret = i2c_mux_gpio_probe_dt(mux, pdev);
 		if (ret < 0)
 			return ret;
-	} else
-		memcpy(&mux->data, pdev->dev.platform_data, sizeof(mux->data));
+	} else {
+		memcpy(&mux->data, dev_get_platdata(&pdev->dev),
+			sizeof(mux->data));
+	}
 
 	/*
 	 * If a GPIO chip name is provided, the GPIO pin numbers provided are
@@ -176,7 +181,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 	if (!parent) {
 		dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
 			mux->data.parent);
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 
 	mux->parent = parent;
@@ -223,7 +228,7 @@ static int i2c_mux_gpio_probe(struct platform_device *pdev)
 		unsigned int class = mux->data.classes ? mux->data.classes[i] : 0;
 
 		mux->adap[i] = i2c_add_mux_adapter(parent, &pdev->dev, mux, nr,
-						   i, class,
+						   mux->data.values[i], class,
 						   i2c_mux_gpio_select, deselect);
 		if (!mux->adap[i]) {
 			ret = -ENODEV;
@@ -278,7 +283,7 @@ static struct platform_driver i2c_mux_gpio_driver = {
 	.driver	= {
 		.owner	= THIS_MODULE,
 		.name	= "i2c-mux-gpio",
-		.of_match_table = of_match_ptr(i2c_mux_gpio_of_match),
+		.of_match_table = i2c_mux_gpio_of_match,
 	},
 };
 
diff --git a/drivers/i2c/muxes/i2c-mux-pca9541.c b/drivers/i2c/muxes/i2c-mux-pca9541.c
index 966a18a..c4f08ad 100644
--- a/drivers/i2c/muxes/i2c-mux-pca9541.c
+++ b/drivers/i2c/muxes/i2c-mux-pca9541.c
@@ -324,7 +324,7 @@ static int pca9541_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adap = client->adapter;
-	struct pca954x_platform_data *pdata = client->dev.platform_data;
+	struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
 	struct pca9541 *data;
 	int force;
 	int ret = -ENODEV;
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index a531d80..bad5b84 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -185,7 +185,7 @@ static int pca954x_probe(struct i2c_client *client,
 			 const struct i2c_device_id *id)
 {
 	struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
-	struct pca954x_platform_data *pdata = client->dev.platform_data;
+	struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
 	int num, force, class;
 	struct pca954x *data;
 	int ret = -ENODEV;
diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c
index a43c0ce..d7978dc 100644
--- a/drivers/i2c/muxes/i2c-mux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c
@@ -20,11 +20,11 @@
 #include <linux/i2c-mux.h>
 #include <linux/init.h>
 #include <linux/module.h>
-#include <linux/of_i2c.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/i2c-mux-pinctrl.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/of.h>
 
 struct i2c_mux_pinctrl {
 	struct device *dev;
@@ -114,7 +114,7 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
 	adapter = of_find_i2c_adapter_by_node(adapter_np);
 	if (!adapter) {
 		dev_err(mux->dev, "Cannot find parent bus\n");
-		return -ENODEV;
+		return -EPROBE_DEFER;
 	}
 	mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
 	put_device(&adapter->dev);
@@ -145,7 +145,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
 
 	mux->dev = &pdev->dev;
 
-	mux->pdata = pdev->dev.platform_data;
+	mux->pdata = dev_get_platdata(&pdev->dev);
 	if (!mux->pdata) {
 		ret = i2c_mux_pinctrl_parse_dt(mux, pdev);
 		if (ret < 0)
@@ -212,7 +212,7 @@ static int i2c_mux_pinctrl_probe(struct platform_device *pdev)
 	if (!mux->parent) {
 		dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
 			mux->pdata->parent_bus_num);
-		ret = -ENODEV;
+		ret = -EPROBE_DEFER;
 		goto err;
 	}