diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2009-01-06 02:58:06 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2009-01-06 02:58:06 (GMT) |
commit | c58bd34d00e04df9a0691732086cf8102b20d907 (patch) | |
tree | 82e0a95b582974351f24cdf812d023c38d921474 /drivers/i2c | |
parent | 8606ab6d30dbaaafff985bd462bf33c36997eae9 (diff) | |
parent | 88f60f62f31092db46aa5c71bf6da67c958bc420 (diff) | |
download | linux-fsl-qoriq-c58bd34d00e04df9a0691732086cf8102b20d907.tar.xz |
Merge branch 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linux
* 'i2c-next' of git://aeryn.fluff.org.uk/bjdooks/linux:
i2c-omap: fix type of irq handler function
i2c-s3c2410: Change IRQ to be plain integer.
i2c-s3c2410: Allow more than one i2c-s3c2410 adapter
i2c-s3c2410: Remove default platform data.
i2c-s3c2410: Use platform data for gpio configuration
i2c-s3c2410: Fixup style problems from checkpatch.pl
i2c-omap: Enable I2C wakeups for 34xx
i2c-omap: reprogram OCP_SYSCONFIG register after reset
i2c-omap: convert 'rev1' flag to generic 'rev' u8
i2c-omap: fix I2C timeouts due to recursive omap_i2c_{un,}idle()
i2c-omap: Clean-up i2c-omap
i2c-omap: Don't compile in OMAP15xx I2C ISR for non-OMAP15xx builds
i2c-omap: Mark init-only functions as __init
i2c-omap: Add support for omap34xx
i2c-omap: FIFO handling support and broken hw workaround for i2c-omap
i2c-omap: Add high-speed support to omap-i2c
i2c-omap: Close suspected race between omap_i2c_idle() and omap_i2c_isr()
i2c-omap: Do not use interruptible wait call in omap_i2c_xfer_msg
Fix up apparently-trivial conflict in drivers/i2c/busses/i2c-s3c2410.c
Diffstat (limited to 'drivers/i2c')
-rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 420 | ||||
-rw-r--r-- | drivers/i2c/busses/i2c-s3c2410.c | 185 |
2 files changed, 406 insertions, 199 deletions
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 608038d..be8ee2c 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -2,13 +2,16 @@ * TI OMAP I2C master mode driver * * Copyright (C) 2003 MontaVista Software, Inc. - * Copyright (C) 2004 Texas Instruments. - * - * Updated to work with multiple I2C interfaces on 24xx by - * Tony Lindgren <tony@atomide.com> and Imre Deak <imre.deak@nokia.com> * Copyright (C) 2005 Nokia Corporation + * Copyright (C) 2004 - 2007 Texas Instruments. * - * Cleaned up by Juha Yrjölä <juha.yrjola@nokia.com> + * Originally written by MontaVista Software, Inc. + * Additional contributions by: + * Tony Lindgren <tony@atomide.com> + * Imre Deak <imre.deak@nokia.com> + * Juha Yrjölä <juha.yrjola@solidboot.com> + * Syed Khasim <x0khasim@ti.com> + * Nishant Menon <nm@ti.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -33,8 +36,14 @@ #include <linux/completion.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/io.h> + +/* I2C controller revisions */ +#define OMAP_I2C_REV_2 0x20 -#include <asm/io.h> +/* I2C controller revisions present on specific hardware */ +#define OMAP_I2C_REV_ON_2430 0x36 +#define OMAP_I2C_REV_ON_3430 0x3C /* timeout waiting for the controller to respond */ #define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000)) @@ -43,6 +52,8 @@ #define OMAP_I2C_IE_REG 0x04 #define OMAP_I2C_STAT_REG 0x08 #define OMAP_I2C_IV_REG 0x0c +/* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */ +#define OMAP_I2C_WE_REG 0x0c #define OMAP_I2C_SYSS_REG 0x10 #define OMAP_I2C_BUF_REG 0x14 #define OMAP_I2C_CNT_REG 0x18 @@ -55,8 +66,11 @@ #define OMAP_I2C_SCLL_REG 0x34 #define OMAP_I2C_SCLH_REG 0x38 #define OMAP_I2C_SYSTEST_REG 0x3c +#define OMAP_I2C_BUFSTAT_REG 0x40 /* I2C Interrupt Enable Register (OMAP_I2C_IE): */ +#define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */ +#define OMAP_I2C_IE_RDR (1 << 13) /* RX Buffer drain int enable */ #define OMAP_I2C_IE_XRDY (1 << 4) /* TX data ready int enable */ #define OMAP_I2C_IE_RRDY (1 << 3) /* RX data ready int enable */ #define OMAP_I2C_IE_ARDY (1 << 2) /* Access ready int enable */ @@ -64,7 +78,8 @@ #define OMAP_I2C_IE_AL (1 << 0) /* Arbitration lost int ena */ /* I2C Status Register (OMAP_I2C_STAT): */ -#define OMAP_I2C_STAT_SBD (1 << 15) /* Single byte data */ +#define OMAP_I2C_STAT_XDR (1 << 14) /* TX Buffer draining */ +#define OMAP_I2C_STAT_RDR (1 << 13) /* RX Buffer draining */ #define OMAP_I2C_STAT_BB (1 << 12) /* Bus busy */ #define OMAP_I2C_STAT_ROVR (1 << 11) /* Receive overrun */ #define OMAP_I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ @@ -76,13 +91,34 @@ #define OMAP_I2C_STAT_NACK (1 << 1) /* No ack interrupt enable */ #define OMAP_I2C_STAT_AL (1 << 0) /* Arbitration lost int ena */ +/* I2C WE wakeup enable register */ +#define OMAP_I2C_WE_XDR_WE (1 << 14) /* TX drain wakup */ +#define OMAP_I2C_WE_RDR_WE (1 << 13) /* RX drain wakeup */ +#define OMAP_I2C_WE_AAS_WE (1 << 9) /* Address as slave wakeup*/ +#define OMAP_I2C_WE_BF_WE (1 << 8) /* Bus free wakeup */ +#define OMAP_I2C_WE_STC_WE (1 << 6) /* Start condition wakeup */ +#define OMAP_I2C_WE_GC_WE (1 << 5) /* General call wakeup */ +#define OMAP_I2C_WE_DRDY_WE (1 << 3) /* TX/RX data ready wakeup */ +#define OMAP_I2C_WE_ARDY_WE (1 << 2) /* Reg access ready wakeup */ +#define OMAP_I2C_WE_NACK_WE (1 << 1) /* No acknowledgment wakeup */ +#define OMAP_I2C_WE_AL_WE (1 << 0) /* Arbitration lost wakeup */ + +#define OMAP_I2C_WE_ALL (OMAP_I2C_WE_XDR_WE | OMAP_I2C_WE_RDR_WE | \ + OMAP_I2C_WE_AAS_WE | OMAP_I2C_WE_BF_WE | \ + OMAP_I2C_WE_STC_WE | OMAP_I2C_WE_GC_WE | \ + OMAP_I2C_WE_DRDY_WE | OMAP_I2C_WE_ARDY_WE | \ + OMAP_I2C_WE_NACK_WE | OMAP_I2C_WE_AL_WE) + /* I2C Buffer Configuration Register (OMAP_I2C_BUF): */ #define OMAP_I2C_BUF_RDMA_EN (1 << 15) /* RX DMA channel enable */ +#define OMAP_I2C_BUF_RXFIF_CLR (1 << 14) /* RX FIFO Clear */ #define OMAP_I2C_BUF_XDMA_EN (1 << 7) /* TX DMA channel enable */ +#define OMAP_I2C_BUF_TXFIF_CLR (1 << 6) /* TX FIFO Clear */ /* I2C Configuration Register (OMAP_I2C_CON): */ #define OMAP_I2C_CON_EN (1 << 15) /* I2C module enable */ #define OMAP_I2C_CON_BE (1 << 14) /* Big endian mode */ +#define OMAP_I2C_CON_OPMODE_HS (1 << 12) /* High Speed support */ #define OMAP_I2C_CON_STB (1 << 11) /* Start byte mode (master) */ #define OMAP_I2C_CON_MST (1 << 10) /* Master/slave mode */ #define OMAP_I2C_CON_TRX (1 << 9) /* TX/RX mode (master only) */ @@ -91,6 +127,10 @@ #define OMAP_I2C_CON_STP (1 << 1) /* Stop cond (master only) */ #define OMAP_I2C_CON_STT (1 << 0) /* Start condition (master) */ +/* I2C SCL time value when Master */ +#define OMAP_I2C_SCLL_HSSCLL 8 +#define OMAP_I2C_SCLH_HSSCLH 8 + /* I2C System Test Register (OMAP_I2C_SYSTEST): */ #ifdef DEBUG #define OMAP_I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ @@ -103,17 +143,19 @@ #define OMAP_I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive out */ #endif -/* I2C System Status register (OMAP_I2C_SYSS): */ -#define OMAP_I2C_SYSS_RDONE (1 << 0) /* Reset Done */ +/* OCP_SYSSTATUS bit definitions */ +#define SYSS_RESETDONE_MASK (1 << 0) + +/* OCP_SYSCONFIG bit definitions */ +#define SYSC_CLOCKACTIVITY_MASK (0x3 << 8) +#define SYSC_SIDLEMODE_MASK (0x3 << 3) +#define SYSC_ENAWAKEUP_MASK (1 << 2) +#define SYSC_SOFTRESET_MASK (1 << 1) +#define SYSC_AUTOIDLE_MASK (1 << 0) -/* I2C System Configuration Register (OMAP_I2C_SYSC): */ -#define OMAP_I2C_SYSC_SRST (1 << 1) /* Soft Reset */ +#define SYSC_IDLEMODE_SMART 0x2 +#define SYSC_CLOCKACTIVITY_FCLK 0x2 -/* REVISIT: Use platform_data instead of module parameters */ -/* Fast Mode = 400 kHz, Standard = 100 kHz */ -static int clock = 100; /* Default: 100 kHz */ -module_param(clock, int, 0); -MODULE_PARM_DESC(clock, "Set I2C clock in kHz: 400=fast mode (default == 100)"); struct omap_i2c_dev { struct device *dev; @@ -123,11 +165,17 @@ struct omap_i2c_dev { struct clk *fclk; /* Functional clock */ struct completion cmd_complete; struct resource *ioarea; + u32 speed; /* Speed of bus in Khz */ u16 cmd_err; u8 *buf; size_t buf_len; struct i2c_adapter adapter; - unsigned rev1:1; + u8 fifo_size; /* use as flag and value + * fifo_size==0 implies no fifo + * if set, should be trsh+1 + */ + u8 rev; + unsigned b_hw:1; /* bad h/w fixes */ unsigned idle:1; u16 iestate; /* Saved interrupt register */ }; @@ -143,9 +191,9 @@ static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg) return __raw_readw(i2c_dev->base + reg); } -static int omap_i2c_get_clocks(struct omap_i2c_dev *dev) +static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev) { - if (cpu_is_omap16xx() || cpu_is_omap24xx()) { + if (cpu_is_omap16xx() || cpu_class_is_omap2()) { dev->iclk = clk_get(dev->dev, "i2c_ick"); if (IS_ERR(dev->iclk)) { dev->iclk = NULL; @@ -178,25 +226,33 @@ static void omap_i2c_put_clocks(struct omap_i2c_dev *dev) static void omap_i2c_unidle(struct omap_i2c_dev *dev) { + WARN_ON(!dev->idle); + if (dev->iclk != NULL) clk_enable(dev->iclk); clk_enable(dev->fclk); + dev->idle = 0; if (dev->iestate) omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, dev->iestate); - dev->idle = 0; } static void omap_i2c_idle(struct omap_i2c_dev *dev) { u16 iv; - dev->idle = 1; + WARN_ON(dev->idle); + dev->iestate = omap_i2c_read_reg(dev, OMAP_I2C_IE_REG); omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, 0); - if (dev->rev1) - iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ - else + if (dev->rev < OMAP_I2C_REV_2) { + iv = omap_i2c_read_reg(dev, OMAP_I2C_IV_REG); /* Read clears */ + } else { omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, dev->iestate); + + /* Flush posted write before the dev->idle store occurs */ + omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG); + } + dev->idle = 1; clk_disable(dev->fclk); if (dev->iclk != NULL) clk_disable(dev->iclk); @@ -204,18 +260,20 @@ static void omap_i2c_idle(struct omap_i2c_dev *dev) static int omap_i2c_init(struct omap_i2c_dev *dev) { - u16 psc = 0; + u16 psc = 0, scll = 0, sclh = 0; + u16 fsscll = 0, fssclh = 0, hsscll = 0, hssclh = 0; unsigned long fclk_rate = 12000000; unsigned long timeout; + unsigned long internal_clk = 0; - if (!dev->rev1) { - omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, OMAP_I2C_SYSC_SRST); + if (dev->rev >= OMAP_I2C_REV_2) { + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, SYSC_SOFTRESET_MASK); /* For some reason we need to set the EN bit before the * reset done bit gets set. */ timeout = jiffies + OMAP_I2C_TIMEOUT; omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) & - OMAP_I2C_SYSS_RDONE)) { + SYSS_RESETDONE_MASK)) { if (time_after(jiffies, timeout)) { dev_warn(dev->dev, "timeout waiting " "for controller reset\n"); @@ -223,6 +281,33 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) } msleep(1); } + + /* SYSC register is cleared by the reset; rewrite it */ + if (dev->rev == OMAP_I2C_REV_ON_2430) { + + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, + SYSC_AUTOIDLE_MASK); + + } else if (dev->rev >= OMAP_I2C_REV_ON_3430) { + u32 v; + + v = SYSC_AUTOIDLE_MASK; + v |= SYSC_ENAWAKEUP_MASK; + v |= (SYSC_IDLEMODE_SMART << + __ffs(SYSC_SIDLEMODE_MASK)); + v |= (SYSC_CLOCKACTIVITY_FCLK << + __ffs(SYSC_CLOCKACTIVITY_MASK)); + + omap_i2c_write_reg(dev, OMAP_I2C_SYSC_REG, v); + /* + * Enabling all wakup sources to stop I2C freezing on + * WFI instruction. + * REVISIT: Some wkup sources might not be needed. + */ + omap_i2c_write_reg(dev, OMAP_I2C_WE_REG, + OMAP_I2C_WE_ALL); + + } } omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, 0); @@ -249,27 +334,65 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) psc = fclk_rate / 12000000; } + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + + /* HSI2C controller internal clk rate should be 19.2 Mhz */ + internal_clk = 19200; + fclk_rate = clk_get_rate(dev->fclk) / 1000; + + /* Compute prescaler divisor */ + psc = fclk_rate / internal_clk; + psc = psc - 1; + + /* If configured for High Speed */ + if (dev->speed > 400) { + /* For first phase of HS mode */ + fsscll = internal_clk / (400 * 2) - 6; + fssclh = internal_clk / (400 * 2) - 6; + + /* For second phase of HS mode */ + hsscll = fclk_rate / (dev->speed * 2) - 6; + hssclh = fclk_rate / (dev->speed * 2) - 6; + } else { + /* To handle F/S modes */ + fsscll = internal_clk / (dev->speed * 2) - 6; + fssclh = internal_clk / (dev->speed * 2) - 6; + } + scll = (hsscll << OMAP_I2C_SCLL_HSSCLL) | fsscll; + sclh = (hssclh << OMAP_I2C_SCLH_HSSCLH) | fssclh; + } else { + /* Program desired operating rate */ + fclk_rate /= (psc + 1) * 1000; + if (psc > 2) + psc = 2; + scll = fclk_rate / (dev->speed * 2) - 7 + psc; + sclh = fclk_rate / (dev->speed * 2) - 7 + psc; + } + /* Setup clock prescaler to obtain approx 12MHz I2C module clock: */ omap_i2c_write_reg(dev, OMAP_I2C_PSC_REG, psc); - /* Program desired operating rate */ - fclk_rate /= (psc + 1) * 1000; - if (psc > 2) - psc = 2; + /* SCL low and high time values */ + omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, scll); + omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, sclh); - omap_i2c_write_reg(dev, OMAP_I2C_SCLL_REG, - fclk_rate / (clock * 2) - 7 + psc); - omap_i2c_write_reg(dev, OMAP_I2C_SCLH_REG, - fclk_rate / (clock * 2) - 7 + psc); + if (dev->fifo_size) + /* Note: setup required fifo size - 1 */ + omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, + (dev->fifo_size - 1) << 8 | /* RTRSH */ + OMAP_I2C_BUF_RXFIF_CLR | + (dev->fifo_size - 1) | /* XTRSH */ + OMAP_I2C_BUF_TXFIF_CLR); /* Take the I2C module out of reset: */ omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, OMAP_I2C_CON_EN); /* Enable interrupts */ omap_i2c_write_reg(dev, OMAP_I2C_IE_REG, - (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | - OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | - OMAP_I2C_IE_AL)); + (OMAP_I2C_IE_XRDY | OMAP_I2C_IE_RRDY | + OMAP_I2C_IE_ARDY | OMAP_I2C_IE_NACK | + OMAP_I2C_IE_AL) | ((dev->fifo_size) ? + (OMAP_I2C_IE_RDR | OMAP_I2C_IE_XDR) : 0)); return 0; } @@ -316,20 +439,59 @@ static int omap_i2c_xfer_msg(struct i2c_adapter *adap, omap_i2c_write_reg(dev, OMAP_I2C_CNT_REG, dev->buf_len); + /* Clear the FIFO Buffers */ + w = omap_i2c_read_reg(dev, OMAP_I2C_BUF_REG); + w |= OMAP_I2C_BUF_RXFIF_CLR | OMAP_I2C_BUF_TXFIF_CLR; + omap_i2c_write_reg(dev, OMAP_I2C_BUF_REG, w); + init_completion(&dev->cmd_complete); dev->cmd_err = 0; w = OMAP_I2C_CON_EN | OMAP_I2C_CON_MST | OMAP_I2C_CON_STT; + + /* High speed configuration */ + if (dev->speed > 400) + w |= OMAP_I2C_CON_OPMODE_HS; + if (msg->flags & I2C_M_TEN) w |= OMAP_I2C_CON_XA; if (!(msg->flags & I2C_M_RD)) w |= OMAP_I2C_CON_TRX; - if (stop) + + if (!dev->b_hw && stop) w |= OMAP_I2C_CON_STP; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); - r = wait_for_completion_interruptible_timeout(&dev->cmd_complete, - OMAP_I2C_TIMEOUT); + /* + * Don't write stt and stp together on some hardware. + */ + if (dev->b_hw && stop) { + unsigned long delay = jiffies + OMAP_I2C_TIMEOUT; + u16 con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + while (con & OMAP_I2C_CON_STT) { + con = omap_i2c_read_reg(dev, OMAP_I2C_CON_REG); + + /* Let the user know if i2c is in a bad state */ + if (time_after(jiffies, delay)) { + dev_err(dev->dev, "controller timed out " + "waiting for start condition to finish\n"); + return -ETIMEDOUT; + } + cpu_relax(); + } + + w |= OMAP_I2C_CON_STP; + w &= ~OMAP_I2C_CON_STT; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, w); + } + + /* + * REVISIT: We should abort the transfer on signals, but the bus goes + * into arbitration and we're currently unable to recover from it. + */ + r = wait_for_completion_timeout(&dev->cmd_complete, + OMAP_I2C_TIMEOUT); dev->buf_len = 0; if (r < 0) return r; @@ -376,7 +538,8 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) omap_i2c_unidle(dev); - if ((r = omap_i2c_wait_for_bb(dev)) < 0) + r = omap_i2c_wait_for_bb(dev); + if (r < 0) goto out; for (i = 0; i < num; i++) { @@ -411,6 +574,9 @@ omap_i2c_ack_stat(struct omap_i2c_dev *dev, u16 stat) omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); } +/* rev1 devices are apparently only on some 15xx */ +#ifdef CONFIG_ARCH_OMAP15XX + static irqreturn_t omap_i2c_rev1_isr(int this_irq, void *dev_id) { @@ -465,6 +631,9 @@ omap_i2c_rev1_isr(int this_irq, void *dev_id) return IRQ_HANDLED; } +#else +#define omap_i2c_rev1_isr NULL +#endif static irqreturn_t omap_i2c_isr(int this_irq, void *dev_id) @@ -472,7 +641,7 @@ omap_i2c_isr(int this_irq, void *dev_id) struct omap_i2c_dev *dev = dev_id; u16 bits; u16 stat, w; - int count = 0; + int err, count = 0; if (dev->idle) return IRQ_NONE; @@ -487,39 +656,96 @@ omap_i2c_isr(int this_irq, void *dev_id) omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat); - if (stat & OMAP_I2C_STAT_ARDY) { - omap_i2c_complete_cmd(dev, 0); - continue; + err = 0; + if (stat & OMAP_I2C_STAT_NACK) { + err |= OMAP_I2C_STAT_NACK; + omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, + OMAP_I2C_CON_STP); } - if (stat & OMAP_I2C_STAT_RRDY) { - w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); - if (dev->buf_len) { - *dev->buf++ = w; - dev->buf_len--; + if (stat & OMAP_I2C_STAT_AL) { + dev_err(dev->dev, "Arbitration lost\n"); + err |= OMAP_I2C_STAT_AL; + } + if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK | + OMAP_I2C_STAT_AL)) + omap_i2c_complete_cmd(dev, err); + if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) { + u8 num_bytes = 1; + if (dev->fifo_size) { + if (stat & OMAP_I2C_STAT_RRDY) + num_bytes = dev->fifo_size; + else + num_bytes = omap_i2c_read_reg(dev, + OMAP_I2C_BUFSTAT_REG); + } + while (num_bytes) { + num_bytes--; + w = omap_i2c_read_reg(dev, OMAP_I2C_DATA_REG); if (dev->buf_len) { - *dev->buf++ = w >> 8; + *dev->buf++ = w; dev->buf_len--; + /* Data reg from 2430 is 8 bit wide */ + if (!cpu_is_omap2430() && + !cpu_is_omap34xx()) { + if (dev->buf_len) { + *dev->buf++ = w >> 8; + dev->buf_len--; + } + } + } else { + if (stat & OMAP_I2C_STAT_RRDY) + dev_err(dev->dev, + "RRDY IRQ while no data" + " requested\n"); + if (stat & OMAP_I2C_STAT_RDR) + dev_err(dev->dev, + "RDR IRQ while no data" + " requested\n"); + break; } - } else - dev_err(dev->dev, "RRDY IRQ while no data " - "requested\n"); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); + } + omap_i2c_ack_stat(dev, + stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)); continue; } - if (stat & OMAP_I2C_STAT_XRDY) { - w = 0; - if (dev->buf_len) { - w = *dev->buf++; - dev->buf_len--; + if (stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)) { + u8 num_bytes = 1; + if (dev->fifo_size) { + if (stat & OMAP_I2C_STAT_XRDY) + num_bytes = dev->fifo_size; + else + num_bytes = omap_i2c_read_reg(dev, + OMAP_I2C_BUFSTAT_REG); + } + while (num_bytes) { + num_bytes--; + w = 0; if (dev->buf_len) { - w |= *dev->buf++ << 8; + w = *dev->buf++; dev->buf_len--; + /* Data reg from 2430 is 8 bit wide */ + if (!cpu_is_omap2430() && + !cpu_is_omap34xx()) { + if (dev->buf_len) { + w |= *dev->buf++ << 8; + dev->buf_len--; + } + } + } else { + if (stat & OMAP_I2C_STAT_XRDY) + dev_err(dev->dev, + "XRDY IRQ while no " + "data to send\n"); + if (stat & OMAP_I2C_STAT_XDR) + dev_err(dev->dev, + "XDR IRQ while no " + "data to send\n"); + break; } - } else - dev_err(dev->dev, "XRDY IRQ while no " - "data to send\n"); - omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); - omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); + omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); + } + omap_i2c_ack_stat(dev, + stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR)); continue; } if (stat & OMAP_I2C_STAT_ROVR) { @@ -527,18 +753,9 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->cmd_err |= OMAP_I2C_STAT_ROVR; } if (stat & OMAP_I2C_STAT_XUDF) { - dev_err(dev->dev, "Transmit overflow\n"); + dev_err(dev->dev, "Transmit underflow\n"); dev->cmd_err |= OMAP_I2C_STAT_XUDF; } - if (stat & OMAP_I2C_STAT_NACK) { - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_NACK); - omap_i2c_write_reg(dev, OMAP_I2C_CON_REG, - OMAP_I2C_CON_STP); - } - if (stat & OMAP_I2C_STAT_AL) { - dev_err(dev->dev, "Arbitration lost\n"); - omap_i2c_complete_cmd(dev, OMAP_I2C_STAT_AL); - } } return count ? IRQ_HANDLED : IRQ_NONE; @@ -549,13 +766,15 @@ static const struct i2c_algorithm omap_i2c_algo = { .functionality = omap_i2c_func, }; -static int +static int __init omap_i2c_probe(struct platform_device *pdev) { struct omap_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem, *irq, *ioarea; + irq_handler_t isr; int r; + u32 speed = 0; /* NOTE: driver uses the static register mapping */ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -576,17 +795,19 @@ omap_i2c_probe(struct platform_device *pdev) return -EBUSY; } - if (clock > 200) - clock = 400; /* Fast mode */ - else - clock = 100; /* Standard mode */ - dev = kzalloc(sizeof(struct omap_i2c_dev), GFP_KERNEL); if (!dev) { r = -ENOMEM; goto err_release_region; } + if (pdev->dev.platform_data != NULL) + speed = *(u32 *)pdev->dev.platform_data; + else + speed = 100; /* Defualt speed */ + + dev->speed = speed; + dev->idle = 1; dev->dev = &pdev->dev; dev->irq = irq->start; dev->base = ioremap(mem->start, mem->end - mem->start + 1); @@ -602,22 +823,39 @@ omap_i2c_probe(struct platform_device *pdev) omap_i2c_unidle(dev); - if (cpu_is_omap15xx()) - dev->rev1 = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) < 0x20; + dev->rev = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; + + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + u16 s; + + /* Set up the fifo size - Get total size */ + s = (omap_i2c_read_reg(dev, OMAP_I2C_BUFSTAT_REG) >> 14) & 0x3; + dev->fifo_size = 0x8 << s; + + /* + * Set up notification threshold as half the total available + * size. This is to ensure that we can handle the status on int + * call back latencies. + */ + dev->fifo_size = (dev->fifo_size / 2); + dev->b_hw = 1; /* Enable hardware fixes */ + } /* reset ASAP, clearing any IRQs */ omap_i2c_init(dev); - r = request_irq(dev->irq, dev->rev1 ? omap_i2c_rev1_isr : omap_i2c_isr, - 0, pdev->name, dev); + isr = (dev->rev < OMAP_I2C_REV_2) ? omap_i2c_rev1_isr : omap_i2c_isr; + r = request_irq(dev->irq, isr, 0, pdev->name, dev); if (r) { dev_err(dev->dev, "failure requesting irq %i\n", dev->irq); goto err_unuse_clocks; } - r = omap_i2c_read_reg(dev, OMAP_I2C_REV_REG) & 0xff; + dev_info(dev->dev, "bus %d rev%d.%d at %d kHz\n", - pdev->id, r >> 4, r & 0xf, clock); + pdev->id, dev->rev >> 4, dev->rev & 0xf, dev->speed); + + omap_i2c_idle(dev); adap = &dev->adapter; i2c_set_adapdata(adap, dev); @@ -635,8 +873,6 @@ omap_i2c_probe(struct platform_device *pdev) goto err_free_irq; } - omap_i2c_idle(dev); - return 0; err_free_irq: diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index c39079f..f69f91f 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -35,11 +35,9 @@ #include <linux/clk.h> #include <linux/cpufreq.h> -#include <mach/hardware.h> #include <asm/irq.h> #include <asm/io.h> -#include <mach/regs-gpio.h> #include <plat/regs-iic.h> #include <plat/iic.h> @@ -64,6 +62,7 @@ struct s3c24xx_i2c { unsigned int msg_ptr; unsigned int tx_setup; + unsigned int irq; enum s3c24xx_i2c_state state; unsigned long clkrate; @@ -71,7 +70,6 @@ struct s3c24xx_i2c { void __iomem *regs; struct clk *clk; struct device *dev; - struct resource *irq; struct resource *ioarea; struct i2c_adapter adap; @@ -80,16 +78,7 @@ struct s3c24xx_i2c { #endif }; -/* default platform data to use if not supplied in the platform_device -*/ - -static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = { - .flags = 0, - .slave_addr = 0x10, - .bus_freq = 100*1000, - .max_freq = 400*1000, - .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, -}; +/* default platform data removed, dev should always carry data. */ /* s3c24xx_i2c_is2440() * @@ -103,21 +92,6 @@ static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c) return !strcmp(pdev->name, "s3c2440-i2c"); } - -/* s3c24xx_i2c_get_platformdata - * - * get the platform data associated with the given device, or return - * the default if there is none -*/ - -static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev) -{ - if (dev->platform_data != NULL) - return (struct s3c2410_platform_i2c *)dev->platform_data; - - return &s3c24xx_i2c_default_platform; -} - /* s3c24xx_i2c_master_complete * * complete the message and wake up the caller, using the given return code, @@ -130,7 +104,7 @@ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret) i2c->msg_ptr = 0; i2c->msg = NULL; - i2c->msg_idx ++; + i2c->msg_idx++; i2c->msg_num = 0; if (ret) i2c->msg_idx = ret; @@ -141,19 +115,17 @@ static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret) static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c) { unsigned long tmp; - + tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); - } static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c) { unsigned long tmp; - + tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); - } /* irq enable/disable functions */ @@ -161,7 +133,7 @@ static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c) static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) { unsigned long tmp; - + tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); } @@ -169,7 +141,7 @@ static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c) { unsigned long tmp; - + tmp = readl(i2c->regs + S3C2410_IICCON); writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); } @@ -177,10 +149,10 @@ static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c) /* s3c24xx_i2c_message_start * - * put the start of a message onto the bus + * put the start of a message onto the bus */ -static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, +static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, struct i2c_msg *msg) { unsigned int addr = (msg->addr & 0x7f) << 1; @@ -199,15 +171,15 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, if (msg->flags & I2C_M_REV_DIR_ADDR) addr ^= 1; - // todo - check for wether ack wanted or not + /* todo - check for wether ack wanted or not */ s3c24xx_i2c_enable_ack(i2c); iiccon = readl(i2c->regs + S3C2410_IICCON); writel(stat, i2c->regs + S3C2410_IICSTAT); - + dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr); writeb(addr, i2c->regs + S3C2410_IICDS); - + /* delay here to ensure the data byte has gotten onto the bus * before the transaction is started */ @@ -215,8 +187,8 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon); writel(iiccon, i2c->regs + S3C2410_IICCON); - - stat |= S3C2410_IICSTAT_START; + + stat |= S3C2410_IICSTAT_START; writel(stat, i2c->regs + S3C2410_IICSTAT); } @@ -227,11 +199,11 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) dev_dbg(i2c->dev, "STOP\n"); /* stop the transfer */ - iicstat &= ~ S3C2410_IICSTAT_START; + iicstat &= ~S3C2410_IICSTAT_START; writel(iicstat, i2c->regs + S3C2410_IICSTAT); - + i2c->state = STATE_STOP; - + s3c24xx_i2c_master_complete(i2c, ret); s3c24xx_i2c_disable_irq(i2c); } @@ -241,7 +213,7 @@ static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) /* is_lastmsg() * - * returns TRUE if the current message is the last in the set + * returns TRUE if the current message is the last in the set */ static inline int is_lastmsg(struct s3c24xx_i2c *i2c) @@ -289,14 +261,14 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) case STATE_STOP: dev_err(i2c->dev, "%s: called in STATE_STOP\n", __func__); - s3c24xx_i2c_disable_irq(i2c); + s3c24xx_i2c_disable_irq(i2c); goto out_ack; case STATE_START: /* last thing we did was send a start condition on the * bus, or started a new i2c message */ - + if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ @@ -322,7 +294,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) if (i2c->state == STATE_READ) goto prepare_read; - /* fall through to the write state, as we will need to + /* fall through to the write state, as we will need to * send a byte as well */ case STATE_WRITE: @@ -339,7 +311,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) } } - retry_write: + retry_write: if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; @@ -359,9 +331,9 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) dev_dbg(i2c->dev, "WRITE: Next Message\n"); i2c->msg_ptr = 0; - i2c->msg_idx ++; + i2c->msg_idx++; i2c->msg++; - + /* check to see if we need to do another message */ if (i2c->msg->flags & I2C_M_NOSTART) { @@ -375,7 +347,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) goto retry_write; } else { - /* send the new start */ s3c24xx_i2c_message_start(i2c, i2c->msg); i2c->state = STATE_START; @@ -389,7 +360,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) break; case STATE_READ: - /* we have a byte of data in the data register, do + /* we have a byte of data in the data register, do * something with it, and then work out wether we are * going to do any more read/write */ @@ -397,13 +368,13 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; - prepare_read: + prepare_read: if (is_msglast(i2c)) { /* last byte of buffer */ if (is_lastmsg(i2c)) s3c24xx_i2c_disable_ack(i2c); - + } else if (is_msgend(i2c)) { /* ok, we've read the entire buffer, see if there * is anything else we need to do */ @@ -429,7 +400,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) /* acknowlegde the IRQ and get back on with the work */ out_ack: - tmp = readl(i2c->regs + S3C2410_IICCON); + tmp = readl(i2c->regs + S3C2410_IICCON); tmp &= ~S3C2410_IICCON_IRQPEND; writel(tmp, i2c->regs + S3C2410_IICCON); out: @@ -450,19 +421,19 @@ static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id) status = readl(i2c->regs + S3C2410_IICSTAT); if (status & S3C2410_IICSTAT_ARBITR) { - // deal with arbitration loss + /* deal with arbitration loss */ dev_err(i2c->dev, "deal with arbitration loss\n"); } if (i2c->state == STATE_IDLE) { dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n"); - tmp = readl(i2c->regs + S3C2410_IICCON); + tmp = readl(i2c->regs + S3C2410_IICCON); tmp &= ~S3C2410_IICCON_IRQPEND; writel(tmp, i2c->regs + S3C2410_IICCON); goto out; } - + /* pretty much this leaves us with the fact that we've * transmitted or received whatever byte we last sent */ @@ -485,16 +456,13 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) while (timeout-- > 0) { iicstat = readl(i2c->regs + S3C2410_IICSTAT); - + if (!(iicstat & S3C2410_IICSTAT_BUSBUSY)) return 0; msleep(1); } - dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n", - __raw_readl(S3C2410_GPEDAT)); - return -ETIMEDOUT; } @@ -503,7 +471,8 @@ static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) * this starts an i2c transfer */ -static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num) +static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, + struct i2c_msg *msgs, int num) { unsigned long timeout; int ret; @@ -529,12 +498,12 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int s3c24xx_i2c_enable_irq(i2c); s3c24xx_i2c_message_start(i2c, msgs); spin_unlock_irq(&i2c->lock); - + timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); ret = i2c->msg_idx; - /* having these next two as dev_err() makes life very + /* having these next two as dev_err() makes life very * noisy when doing an i2cdetect */ if (timeout == 0) @@ -591,19 +560,6 @@ static const struct i2c_algorithm s3c24xx_i2c_algorithm = { .functionality = s3c24xx_i2c_func, }; -static struct s3c24xx_i2c s3c24xx_i2c = { - .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_i2c.lock), - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait), - .tx_setup = 50, - .adap = { - .name = "s3c2410-i2c", - .owner = THIS_MODULE, - .algo = &s3c24xx_i2c_algorithm, - .retries = 2, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - }, -}; - /* s3c24xx_i2c_calcdivisor * * return the divisor settings for a given frequency @@ -643,7 +599,7 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted) { int diff = freq - wanted; - return (diff >= -2 && diff <= 2); + return diff >= -2 && diff <= 2; } /* s3c24xx_i2c_clockrate @@ -655,7 +611,7 @@ static inline int freq_acceptable(unsigned int freq, unsigned int wanted) static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) { - struct s3c2410_platform_i2c *pdata; + struct s3c2410_platform_i2c *pdata = i2c->dev->platform_data; unsigned long clkin = clk_get_rate(i2c->clk); unsigned int divs, div1; u32 iiccon; @@ -663,10 +619,8 @@ static int s3c24xx_i2c_clockrate(struct s3c24xx_i2c *i2c, unsigned int *got) int start, end; i2c->clkrate = clkin; - - pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent); clkin /= 1000; /* clkin now in KHz */ - + dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq); @@ -774,7 +728,7 @@ static inline void s3c24xx_i2c_deregister_cpufreq(struct s3c24xx_i2c *i2c) /* s3c24xx_i2c_init * - * initialise the controller, set the IO lines and frequency + * initialise the controller, set the IO lines and frequency */ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) @@ -785,15 +739,15 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) /* get the plafrom data */ - pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent); + pdata = i2c->dev->platform_data; /* inititalise the gpio */ - s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA); - s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL); + if (pdata->cfg_gpio) + pdata->cfg_gpio(to_platform_device(i2c->dev)); /* write slave address */ - + writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD); dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr); @@ -831,12 +785,32 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) static int s3c24xx_i2c_probe(struct platform_device *pdev) { - struct s3c24xx_i2c *i2c = &s3c24xx_i2c; + struct s3c24xx_i2c *i2c; struct s3c2410_platform_i2c *pdata; struct resource *res; int ret; - pdata = s3c24xx_i2c_get_platformdata(&pdev->dev); + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + + i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL); + if (!i2c) { + dev_err(&pdev->dev, "no memory for state\n"); + return -ENOMEM; + } + + strlcpy(i2c->adap.name, "s3c2410-i2c", sizeof(i2c->adap.name)); + i2c->adap.owner = THIS_MODULE; + i2c->adap.algo = &s3c24xx_i2c_algorithm; + i2c->adap.retries = 2; + i2c->adap.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; + i2c->tx_setup = 50; + + spin_lock_init(&i2c->lock); + init_waitqueue_head(&i2c->wait); /* find the clock and enable it */ @@ -878,7 +852,8 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) goto err_ioarea; } - dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res); + dev_dbg(&pdev->dev, "registers %p (%p, %p)\n", + i2c->regs, i2c->ioarea, res); /* setup info block for the i2c core */ @@ -892,29 +867,23 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) goto err_iomap; /* find the IRQ for this unit (note, this relies on the init call to - * ensure no current IRQs pending + * ensure no current IRQs pending */ - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res == NULL) { + i2c->irq = ret = platform_get_irq(pdev, 0); + if (ret <= 0) { dev_err(&pdev->dev, "cannot find IRQ\n"); - ret = -ENOENT; goto err_iomap; } - ret = request_irq(res->start, s3c24xx_i2c_irq, IRQF_DISABLED, - pdev->name, i2c); + ret = request_irq(i2c->irq, s3c24xx_i2c_irq, IRQF_DISABLED, + dev_name(&pdev->dev), i2c); if (ret != 0) { - dev_err(&pdev->dev, "cannot claim IRQ\n"); + dev_err(&pdev->dev, "cannot claim IRQ %d\n", i2c->irq); goto err_iomap; } - i2c->irq = res; - - dev_dbg(&pdev->dev, "irq resource %p (%lu)\n", res, - (unsigned long)res->start); - ret = s3c24xx_i2c_register_cpufreq(i2c); if (ret < 0) { dev_err(&pdev->dev, "failed to register cpufreq notifier\n"); @@ -944,7 +913,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) s3c24xx_i2c_deregister_cpufreq(i2c); err_irq: - free_irq(i2c->irq->start, i2c); + free_irq(i2c->irq, i2c); err_iomap: iounmap(i2c->regs); @@ -958,6 +927,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) clk_put(i2c->clk); err_noclk: + kfree(i2c); return ret; } @@ -973,7 +943,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) s3c24xx_i2c_deregister_cpufreq(i2c); i2c_del_adapter(&i2c->adap); - free_irq(i2c->irq->start, i2c); + free_irq(i2c->irq, i2c); clk_disable(i2c->clk); clk_put(i2c->clk); @@ -982,6 +952,7 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) release_resource(i2c->ioarea); kfree(i2c->ioarea); + kfree(i2c); return 0; } |