diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 22:20:36 (GMT) |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/pci/cmd640.c | |
download | linux-fsl-qoriq-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.xz |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/ide/pci/cmd640.c')
-rw-r--r-- | drivers/ide/pci/cmd640.c | 879 |
1 files changed, 879 insertions, 0 deletions
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c new file mode 100644 index 0000000..92a2b7c --- /dev/null +++ b/drivers/ide/pci/cmd640.c @@ -0,0 +1,879 @@ +/* + * linux/drivers/ide/pci/cmd640.c Version 1.02 Sep 01, 1996 + * + * Copyright (C) 1995-1996 Linus Torvalds & authors (see below) + */ + +/* + * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov) + * mlord@pobox.com (Mark Lord) + * + * See linux/MAINTAINERS for address of current maintainer. + * + * This file provides support for the advanced features and bugs + * of IDE interfaces using the CMD Technologies 0640 IDE interface chip. + * + * These chips are basically fucked by design, and getting this driver + * to work on every motherboard design that uses this screwed chip seems + * bloody well impossible. However, we're still trying. + * + * Version 0.97 worked for everybody. + * + * User feedback is essential. Many thanks to the beta test team: + * + * A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com, + * bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz, + * chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de, + * derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de, + * flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net, + * j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net, + * kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu, + * peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com, + * s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net, + * steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com + * liug@mama.indstate.edu, and others. + * + * Version 0.01 Initial version, hacked out of ide.c, + * and #include'd rather than compiled separately. + * This will get cleaned up in a subsequent release. + * + * Version 0.02 Fixes for vlb initialization code, enable prefetch + * for versions 'B' and 'C' of chip by default, + * some code cleanup. + * + * Version 0.03 Added reset of secondary interface, + * and black list for devices which are not compatible + * with prefetch mode. Separate function for setting + * prefetch is added, possibly it will be called some + * day from ioctl processing code. + * + * Version 0.04 Now configs/compiles separate from ide.c + * + * Version 0.05 Major rewrite of interface timing code. + * Added new function cmd640_set_mode to set PIO mode + * from ioctl call. New drives added to black list. + * + * Version 0.06 More code cleanup. Prefetch is enabled only for + * detected hard drives, not included in prefetch + * black list. + * + * Version 0.07 Changed to more conservative drive tuning policy. + * Unknown drives, which report PIO < 4 are set to + * (reported_PIO - 1) if it is supported, or to PIO0. + * List of known drives extended by info provided by + * CMD at their ftp site. + * + * Version 0.08 Added autotune/noautotune support. + * + * Version 0.09 Try to be smarter about 2nd port enabling. + * Version 0.10 Be nice and don't reset 2nd port. + * Version 0.11 Try to handle more weird situations. + * + * Version 0.12 Lots of bug fixes from Laszlo Peter + * irq unmasking disabled for reliability. + * try to be even smarter about the second port. + * tidy up source code formatting. + * Version 0.13 permit irq unmasking again. + * Version 0.90 massive code cleanup, some bugs fixed. + * defaults all drives to PIO mode0, prefetch off. + * autotune is OFF by default, with compile time flag. + * prefetch can be turned OFF/ON using "hdparm -p8/-p9" + * (requires hdparm-3.1 or newer) + * Version 0.91 first release to linux-kernel list. + * Version 0.92 move initial reg dump to separate callable function + * change "readahead" to "prefetch" to avoid confusion + * Version 0.95 respect original BIOS timings unless autotuning. + * tons of code cleanup and rearrangement. + * added CONFIG_BLK_DEV_CMD640_ENHANCED option + * prevent use of unmask when prefetch is on + * Version 0.96 prevent use of io_32bit when prefetch is off + * Version 0.97 fix VLB secondary interface for sjd@slip.net + * other minor tune-ups: 0.96 was very good. + * Version 0.98 ignore PCI version when disabled by BIOS + * Version 0.99 display setup/active/recovery clocks with PIO mode + * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems + * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7" + * ("fast" is necessary for 32bit I/O in some systems) + * Version 1.02 fix bug that resulted in slow "setup times" + * (patch courtesy of Zoltan Hidvegi) + */ + +#undef REALLY_SLOW_IO /* most systems can safely undef this */ +#define CMD640_PREFETCH_MASKS 1 + +//#define CMD640_DUMP_REGS + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/ioport.h> +#include <linux/blkdev.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/init.h> + +#include <asm/io.h> + +/* + * This flag is set in ide.c by the parameter: ide0=cmd640_vlb + */ +int cmd640_vlb = 0; + +/* + * CMD640 specific registers definition. + */ + +#define VID 0x00 +#define DID 0x02 +#define PCMD 0x04 +#define PCMD_ENA 0x01 +#define PSTTS 0x06 +#define REVID 0x08 +#define PROGIF 0x09 +#define SUBCL 0x0a +#define BASCL 0x0b +#define BaseA0 0x10 +#define BaseA1 0x14 +#define BaseA2 0x18 +#define BaseA3 0x1c +#define INTLINE 0x3c +#define INPINE 0x3d + +#define CFR 0x50 +#define CFR_DEVREV 0x03 +#define CFR_IDE01INTR 0x04 +#define CFR_DEVID 0x18 +#define CFR_AT_VESA_078h 0x20 +#define CFR_DSA1 0x40 +#define CFR_DSA0 0x80 + +#define CNTRL 0x51 +#define CNTRL_DIS_RA0 0x40 +#define CNTRL_DIS_RA1 0x80 +#define CNTRL_ENA_2ND 0x08 + +#define CMDTIM 0x52 +#define ARTTIM0 0x53 +#define DRWTIM0 0x54 +#define ARTTIM1 0x55 +#define DRWTIM1 0x56 +#define ARTTIM23 0x57 +#define ARTTIM23_DIS_RA2 0x04 +#define ARTTIM23_DIS_RA3 0x08 +#define DRWTIM23 0x58 +#define BRST 0x59 + +/* + * Registers and masks for easy access by drive index: + */ +static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23}; +static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3}; + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + +static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23}; +static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23}; + +/* + * Current cmd640 timing values for each drive. + * The defaults for each are the slowest possible timings. + */ +static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */ +static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */ +static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */ + +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + +/* + * These are initialized to point at the devices we control + */ +static ide_hwif_t *cmd_hwif0, *cmd_hwif1; +static ide_drive_t *cmd_drives[4]; + +/* + * Interface to access cmd640x registers + */ +static unsigned int cmd640_key; +static void (*__put_cmd640_reg)(u16 reg, u8 val); +static u8 (*__get_cmd640_reg)(u16 reg); + +/* + * This is read from the CFR reg, and is used in several places. + */ +static unsigned int cmd640_chip_version; + +/* + * The CMD640x chip does not support DWORD config write cycles, but some + * of the BIOSes use them to implement the config services. + * Therefore, we must use direct IO instead. + */ + +/* PCI method 1 access */ + +static void put_cmd640_reg_pci1 (u16 reg, u8 val) +{ + outl_p((reg & 0xfc) | cmd640_key, 0xcf8); + outb_p(val, (reg & 3) | 0xcfc); +} + +static u8 get_cmd640_reg_pci1 (u16 reg) +{ + outl_p((reg & 0xfc) | cmd640_key, 0xcf8); + return inb_p((reg & 3) | 0xcfc); +} + +/* PCI method 2 access (from CMD datasheet) */ + +static void put_cmd640_reg_pci2 (u16 reg, u8 val) +{ + outb_p(0x10, 0xcf8); + outb_p(val, cmd640_key + reg); + outb_p(0, 0xcf8); +} + +static u8 get_cmd640_reg_pci2 (u16 reg) +{ + u8 b; + + outb_p(0x10, 0xcf8); + b = inb_p(cmd640_key + reg); + outb_p(0, 0xcf8); + return b; +} + +/* VLB access */ + +static void put_cmd640_reg_vlb (u16 reg, u8 val) +{ + outb_p(reg, cmd640_key); + outb_p(val, cmd640_key + 4); +} + +static u8 get_cmd640_reg_vlb (u16 reg) +{ + outb_p(reg, cmd640_key); + return inb_p(cmd640_key + 4); +} + +static u8 get_cmd640_reg(u16 reg) +{ + u8 b; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + b = __get_cmd640_reg(reg); + spin_unlock_irqrestore(&ide_lock, flags); + return b; +} + +static void put_cmd640_reg(u16 reg, u8 val) +{ + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + __put_cmd640_reg(reg,val); + spin_unlock_irqrestore(&ide_lock, flags); +} + +static int __init match_pci_cmd640_device (void) +{ + const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06}; + unsigned int i; + for (i = 0; i < 4; i++) { + if (get_cmd640_reg(i) != ven_dev[i]) + return 0; + } +#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT + if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) { + printk("ide: cmd640 on PCI disabled by BIOS\n"); + return 0; + } +#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */ + return 1; /* success */ +} + +/* + * Probe for CMD640x -- pci method 1 + */ +static int __init probe_for_cmd640_pci1 (void) +{ + __get_cmd640_reg = get_cmd640_reg_pci1; + __put_cmd640_reg = put_cmd640_reg_pci1; + for (cmd640_key = 0x80000000; + cmd640_key <= 0x8000f800; + cmd640_key += 0x800) { + if (match_pci_cmd640_device()) + return 1; /* success */ + } + return 0; +} + +/* + * Probe for CMD640x -- pci method 2 + */ +static int __init probe_for_cmd640_pci2 (void) +{ + __get_cmd640_reg = get_cmd640_reg_pci2; + __put_cmd640_reg = put_cmd640_reg_pci2; + for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) { + if (match_pci_cmd640_device()) + return 1; /* success */ + } + return 0; +} + +/* + * Probe for CMD640x -- vlb + */ +static int __init probe_for_cmd640_vlb (void) +{ + u8 b; + + __get_cmd640_reg = get_cmd640_reg_vlb; + __put_cmd640_reg = put_cmd640_reg_vlb; + cmd640_key = 0x178; + b = get_cmd640_reg(CFR); + if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) { + cmd640_key = 0x78; + b = get_cmd640_reg(CFR); + if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h)) + return 0; + } + return 1; /* success */ +} + +/* + * Returns 1 if an IDE interface/drive exists at 0x170, + * Returns 0 otherwise. + */ +static int __init secondary_port_responding (void) +{ + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + + outb_p(0x0a, 0x170 + IDE_SELECT_OFFSET); /* select drive0 */ + udelay(100); + if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x0a) { + outb_p(0x1a, 0x170 + IDE_SELECT_OFFSET); /* select drive1 */ + udelay(100); + if ((inb_p(0x170 + IDE_SELECT_OFFSET) & 0x1f) != 0x1a) { + spin_unlock_irqrestore(&ide_lock, flags); + return 0; /* nothing responded */ + } + } + spin_unlock_irqrestore(&ide_lock, flags); + return 1; /* success */ +} + +#ifdef CMD640_DUMP_REGS +/* + * Dump out all cmd640 registers. May be called from ide.c + */ +static void cmd640_dump_regs (void) +{ + unsigned int reg = cmd640_vlb ? 0x50 : 0x00; + + /* Dump current state of chip registers */ + printk("ide: cmd640 internal register dump:"); + for (; reg <= 0x59; reg++) { + if (!(reg & 0x0f)) + printk("\n%04x:", reg); + printk(" %02x", get_cmd640_reg(reg)); + } + printk("\n"); +} +#endif + +/* + * Check whether prefetch is on for a drive, + * and initialize the unmask flags for safe operation. + */ +static void __init check_prefetch (unsigned int index) +{ + ide_drive_t *drive = cmd_drives[index]; + u8 b = get_cmd640_reg(prefetch_regs[index]); + + if (b & prefetch_masks[index]) { /* is prefetch off? */ + drive->no_unmask = 0; + drive->no_io_32bit = 1; + drive->io_32bit = 0; + } else { +#if CMD640_PREFETCH_MASKS + drive->no_unmask = 1; + drive->unmask = 0; +#endif + drive->no_io_32bit = 0; + } +} + +/* + * Figure out which devices we control + */ +static void __init setup_device_ptrs (void) +{ + unsigned int i; + + cmd_hwif0 = &ide_hwifs[0]; /* default, if not found below */ + cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */ + for (i = 0; i < MAX_HWIFS; i++) { + ide_hwif_t *hwif = &ide_hwifs[i]; + if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) { + if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0) + cmd_hwif0 = hwif; + else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170) + cmd_hwif1 = hwif; + } + } + cmd_drives[0] = &cmd_hwif0->drives[0]; + cmd_drives[1] = &cmd_hwif0->drives[1]; + cmd_drives[2] = &cmd_hwif1->drives[0]; + cmd_drives[3] = &cmd_hwif1->drives[1]; +} + +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + +/* + * Sets prefetch mode for a drive. + */ +static void set_prefetch_mode (unsigned int index, int mode) +{ + ide_drive_t *drive = cmd_drives[index]; + int reg = prefetch_regs[index]; + u8 b; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + b = __get_cmd640_reg(reg); + if (mode) { /* want prefetch on? */ +#if CMD640_PREFETCH_MASKS + drive->no_unmask = 1; + drive->unmask = 0; +#endif + drive->no_io_32bit = 0; + b &= ~prefetch_masks[index]; /* enable prefetch */ + } else { + drive->no_unmask = 0; + drive->no_io_32bit = 1; + drive->io_32bit = 0; + b |= prefetch_masks[index]; /* disable prefetch */ + } + __put_cmd640_reg(reg, b); + spin_unlock_irqrestore(&ide_lock, flags); +} + +/* + * Dump out current drive clocks settings + */ +static void display_clocks (unsigned int index) +{ + u8 active_count, recovery_count; + + active_count = active_counts[index]; + if (active_count == 1) + ++active_count; + recovery_count = recovery_counts[index]; + if (active_count > 3 && recovery_count == 1) + ++recovery_count; + if (cmd640_chip_version > 1) + recovery_count += 1; /* cmd640b uses (count + 1)*/ + printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count); +} + +/* + * Pack active and recovery counts into single byte representation + * used by controller + */ +inline static u8 pack_nibbles (u8 upper, u8 lower) +{ + return ((upper & 0x0f) << 4) | (lower & 0x0f); +} + +/* + * This routine retrieves the initial drive timings from the chipset. + */ +static void __init retrieve_drive_counts (unsigned int index) +{ + u8 b; + + /* + * Get the internal setup timing, and convert to clock count + */ + b = get_cmd640_reg(arttim_regs[index]) & ~0x3f; + switch (b) { + case 0x00: b = 4; break; + case 0x80: b = 3; break; + case 0x40: b = 2; break; + default: b = 5; break; + } + setup_counts[index] = b; + + /* + * Get the active/recovery counts + */ + b = get_cmd640_reg(drwtim_regs[index]); + active_counts[index] = (b >> 4) ? (b >> 4) : 0x10; + recovery_counts[index] = (b & 0x0f) ? (b & 0x0f) : 0x10; +} + + +/* + * This routine writes the prepared setup/active/recovery counts + * for a drive into the cmd640 chipset registers to active them. + */ +static void program_drive_counts (unsigned int index) +{ + unsigned long flags; + u8 setup_count = setup_counts[index]; + u8 active_count = active_counts[index]; + u8 recovery_count = recovery_counts[index]; + + /* + * Set up address setup count and drive read/write timing registers. + * Primary interface has individual count/timing registers for + * each drive. Secondary interface has one common set of registers, + * so we merge the timings, using the slowest value for each timing. + */ + if (index > 1) { + unsigned int mate; + if (cmd_drives[mate = index ^ 1]->present) { + if (setup_count < setup_counts[mate]) + setup_count = setup_counts[mate]; + if (active_count < active_counts[mate]) + active_count = active_counts[mate]; + if (recovery_count < recovery_counts[mate]) + recovery_count = recovery_counts[mate]; + } + } + + /* + * Convert setup_count to internal chipset representation + */ + switch (setup_count) { + case 4: setup_count = 0x00; break; + case 3: setup_count = 0x80; break; + case 1: + case 2: setup_count = 0x40; break; + default: setup_count = 0xc0; /* case 5 */ + } + + /* + * Now that everything is ready, program the new timings + */ + spin_lock_irqsave(&ide_lock, flags); + /* + * Program the address_setup clocks into ARTTIM reg, + * and then the active/recovery counts into the DRWTIM reg + * (this converts counts of 16 into counts of zero -- okay). + */ + setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f; + __put_cmd640_reg(arttim_regs[index], setup_count); + __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count)); + spin_unlock_irqrestore(&ide_lock, flags); +} + +/* + * Set a specific pio_mode for a drive + */ +static void cmd640_set_mode (unsigned int index, u8 pio_mode, unsigned int cycle_time) +{ + int setup_time, active_time, recovery_time, clock_time; + u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count; + int bus_speed = system_bus_clock(); + + if (pio_mode > 5) + pio_mode = 5; + setup_time = ide_pio_timings[pio_mode].setup_time; + active_time = ide_pio_timings[pio_mode].active_time; + recovery_time = cycle_time - (setup_time + active_time); + clock_time = 1000 / bus_speed; + cycle_count = (cycle_time + clock_time - 1) / clock_time; + + setup_count = (setup_time + clock_time - 1) / clock_time; + + active_count = (active_time + clock_time - 1) / clock_time; + if (active_count < 2) + active_count = 2; /* minimum allowed by cmd640 */ + + recovery_count = (recovery_time + clock_time - 1) / clock_time; + recovery_count2 = cycle_count - (setup_count + active_count); + if (recovery_count2 > recovery_count) + recovery_count = recovery_count2; + if (recovery_count < 2) + recovery_count = 2; /* minimum allowed by cmd640 */ + if (recovery_count > 17) { + active_count += recovery_count - 17; + recovery_count = 17; + } + if (active_count > 16) + active_count = 16; /* maximum allowed by cmd640 */ + if (cmd640_chip_version > 1) + recovery_count -= 1; /* cmd640b uses (count + 1)*/ + if (recovery_count > 16) + recovery_count = 16; /* maximum allowed by cmd640 */ + + setup_counts[index] = setup_count; + active_counts[index] = active_count; + recovery_counts[index] = recovery_count; + + /* + * In a perfect world, we might set the drive pio mode here + * (using WIN_SETFEATURE) before continuing. + * + * But we do not, because: + * 1) this is the wrong place to do it (proper is do_special() in ide.c) + * 2) in practice this is rarely, if ever, necessary + */ + program_drive_counts (index); +} + +/* + * Drive PIO mode selection: + */ +static void cmd640_tune_drive (ide_drive_t *drive, u8 mode_wanted) +{ + u8 b; + ide_pio_data_t d; + unsigned int index = 0; + + while (drive != cmd_drives[index]) { + if (++index > 3) { + printk("%s: bad news in cmd640_tune_drive\n", drive->name); + return; + } + } + switch (mode_wanted) { + case 6: /* set fast-devsel off */ + case 7: /* set fast-devsel on */ + mode_wanted &= 1; + b = get_cmd640_reg(CNTRL) & ~0x27; + if (mode_wanted) + b |= 0x27; + put_cmd640_reg(CNTRL, b); + printk("%s: %sabled cmd640 fast host timing (devsel)\n", drive->name, mode_wanted ? "en" : "dis"); + return; + + case 8: /* set prefetch off */ + case 9: /* set prefetch on */ + mode_wanted &= 1; + set_prefetch_mode(index, mode_wanted); + printk("%s: %sabled cmd640 prefetch\n", drive->name, mode_wanted ? "en" : "dis"); + return; + } + + (void) ide_get_best_pio_mode (drive, mode_wanted, 5, &d); + cmd640_set_mode (index, d.pio_mode, d.cycle_time); + + printk ("%s: selected cmd640 PIO mode%d (%dns)%s", + drive->name, + d.pio_mode, + d.cycle_time, + d.overridden ? " (overriding vendor mode)" : ""); + display_clocks(index); + return; +} + +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + +static int pci_conf1(void) +{ + u32 tmp; + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + outb(0x01, 0xCFB); + tmp = inl(0xCF8); + outl(0x80000000, 0xCF8); + if (inl(0xCF8) == 0x80000000) { + outl(tmp, 0xCF8); + spin_unlock_irqrestore(&ide_lock, flags); + return 1; + } + outl(tmp, 0xCF8); + spin_unlock_irqrestore(&ide_lock, flags); + return 0; +} + +static int pci_conf2(void) +{ + unsigned long flags; + + spin_lock_irqsave(&ide_lock, flags); + outb(0x00, 0xCFB); + outb(0x00, 0xCF8); + outb(0x00, 0xCFA); + if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) { + spin_unlock_irqrestore(&ide_lock, flags); + return 1; + } + spin_unlock_irqrestore(&ide_lock, flags); + return 0; +} + +/* + * Probe for a cmd640 chipset, and initialize it if found. Called from ide.c + */ +int __init ide_probe_for_cmd640x (void) +{ +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + int second_port_toggled = 0; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + int second_port_cmd640 = 0; + const char *bus_type, *port2; + unsigned int index; + u8 b, cfr; + + if (cmd640_vlb && probe_for_cmd640_vlb()) { + bus_type = "VLB"; + } else { + cmd640_vlb = 0; + /* Find out what kind of PCI probing is supported otherwise + Justin Gibbs will sulk.. */ + if (pci_conf1() && probe_for_cmd640_pci1()) + bus_type = "PCI (type1)"; + else if (pci_conf2() && probe_for_cmd640_pci2()) + bus_type = "PCI (type2)"; + else + return 0; + } + /* + * Undocumented magic (there is no 0x5b reg in specs) + */ + put_cmd640_reg(0x5b, 0xbd); + if (get_cmd640_reg(0x5b) != 0xbd) { + printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n"); + return 0; + } + put_cmd640_reg(0x5b, 0); + +#ifdef CMD640_DUMP_REGS + cmd640_dump_regs(); +#endif + + /* + * Documented magic begins here + */ + cfr = get_cmd640_reg(CFR); + cmd640_chip_version = cfr & CFR_DEVREV; + if (cmd640_chip_version == 0) { + printk ("ide: bad cmd640 revision: %d\n", cmd640_chip_version); + return 0; + } + + /* + * Initialize data for primary port + */ + setup_device_ptrs (); + printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n", + cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr); + cmd_hwif0->chipset = ide_cmd640; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + cmd_hwif0->tuneproc = &cmd640_tune_drive; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + + /* + * Ensure compatibility by always using the slowest timings + * for access to the drive's command register block, + * and reset the prefetch burstsize to default (512 bytes). + * + * Maybe we need a way to NOT do these on *some* systems? + */ + put_cmd640_reg(CMDTIM, 0); + put_cmd640_reg(BRST, 0x40); + + /* + * Try to enable the secondary interface, if not already enabled + */ + if (cmd_hwif1->noprobe) { + port2 = "not probed"; + } else { + b = get_cmd640_reg(CNTRL); + if (secondary_port_responding()) { + if ((b & CNTRL_ENA_2ND)) { + second_port_cmd640 = 1; + port2 = "okay"; + } else if (cmd640_vlb) { + second_port_cmd640 = 1; + port2 = "alive"; + } else + port2 = "not cmd640"; + } else { + put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */ + if (secondary_port_responding()) { + second_port_cmd640 = 1; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + second_port_toggled = 1; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + port2 = "enabled"; + } else { + put_cmd640_reg(CNTRL, b); /* restore original setting */ + port2 = "not responding"; + } + } + } + + /* + * Initialize data for secondary cmd640 port, if enabled + */ + if (second_port_cmd640) { + cmd_hwif0->serialized = 1; + cmd_hwif1->serialized = 1; + cmd_hwif1->chipset = ide_cmd640; + cmd_hwif0->mate = cmd_hwif1; + cmd_hwif1->mate = cmd_hwif0; + cmd_hwif1->channel = 1; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + cmd_hwif1->tuneproc = &cmd640_tune_drive; +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + } + printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name, + cmd_hwif0->serialized ? "" : "not ", port2); + + /* + * Establish initial timings/prefetch for all drives. + * Do not unnecessarily disturb any prior BIOS setup of these. + */ + for (index = 0; index < (2 + (second_port_cmd640 << 1)); index++) { + ide_drive_t *drive = cmd_drives[index]; +#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED + if (drive->autotune || ((index > 1) && second_port_toggled)) { + /* + * Reset timing to the slowest speed and turn off prefetch. + * This way, the drive identify code has a better chance. + */ + setup_counts [index] = 4; /* max possible */ + active_counts [index] = 16; /* max possible */ + recovery_counts [index] = 16; /* max possible */ + program_drive_counts (index); + set_prefetch_mode (index, 0); + printk("cmd640: drive%d timings/prefetch cleared\n", index); + } else { + /* + * Record timings/prefetch without changing them. + * This preserves any prior BIOS setup. + */ + retrieve_drive_counts (index); + check_prefetch (index); + printk("cmd640: drive%d timings/prefetch(%s) preserved", + index, drive->no_io_32bit ? "off" : "on"); + display_clocks(index); + } +#else + /* + * Set the drive unmask flags to match the prefetch setting + */ + check_prefetch (index); + printk("cmd640: drive%d timings/prefetch(%s) preserved\n", + index, drive->no_io_32bit ? "off" : "on"); +#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */ + } + +#ifdef CMD640_DUMP_REGS + cmd640_dump_regs(); +#endif + return 1; +} + |