diff options
author | Mitko Haralanov <mitko@qlogic.com> | 2011-10-19 22:46:40 (GMT) |
---|---|---|
committer | Roland Dreier <roland@purestorage.com> | 2011-10-21 22:08:20 (GMT) |
commit | dde05cbdf8b1c404344c370fe6e18ff160d6da6a (patch) | |
tree | 6c480da3c7e8e41ad6b24a51eaa27caeb6ea22b2 /drivers/infiniband/hw/qib/qib_iba7322.c | |
parent | 44d75d3d92304a1df8131f48b38de08df9011fa2 (diff) | |
download | linux-fsl-qoriq-dde05cbdf8b1c404344c370fe6e18ff160d6da6a.tar.xz |
IB/qib: Hold links until tuning data is available
Hold the link state machine until the tuning data is read from the
QSFP EEPROM so correct tuning settings are applied before the state
machine attempts to bring the link up. Link is also held on cable
unplug in case a different cable is used.
Signed-off-by: Mitko Haralanov <mitko@qlogic.com>
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Diffstat (limited to 'drivers/infiniband/hw/qib/qib_iba7322.c')
-rw-r--r-- | drivers/infiniband/hw/qib/qib_iba7322.c | 120 |
1 files changed, 77 insertions, 43 deletions
diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 708f4fe..86575fb 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -2381,17 +2381,17 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); set_vls(ppd); + /* Hold the link state machine for mezz boards */ + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + + /* be paranoid against later code motion, etc. */ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); qib_write_kreg_port(ppd, krp_rcvctrl, ppd->p_rcvctrl); spin_unlock_irqrestore(&dd->cspec->rcvmod_lock, flags); - /* Hold the link state machine for mezz boards */ - if (IS_QMH(dd) || IS_QME(dd)) - qib_set_ib_7322_lstate(ppd, 0, - QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); - /* Also enable IBSTATUSCHG interrupt. */ val = qib_read_kreg_port(ppd, krp_errmask); qib_write_kreg_port(ppd, krp_errmask, @@ -5229,6 +5229,8 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) QIBL_IB_AUTONEG_INPROG))) set_7322_ibspeed_fast(ppd, ppd->link_speed_enabled); if (!(ppd->lflags & QIBL_IB_AUTONEG_INPROG)) { + struct qib_qsfp_data *qd = + &ppd->cpspec->qsfp_data; /* unlock the Tx settings, speed may change */ qib_write_kreg_port(ppd, krp_tx_deemph_override, SYM_MASK(IBSD_TX_DEEMPHASIS_OVERRIDE_0, @@ -5236,6 +5238,12 @@ static int qib_7322_ib_updown(struct qib_pportdata *ppd, int ibup, u64 ibcs) qib_cancel_sends(ppd); /* on link down, ensure sane pcs state */ qib_7322_mini_pcs_reset(ppd); + /* schedule the qsfp refresh which should turn the link + off */ + if (ppd->dd->flags & QIB_HAS_QSFP) { + qd->t_insert = get_jiffies_64(); + schedule_work(&qd->work); + } spin_lock_irqsave(&ppd->sdma_lock, flags); if (__qib_sdma_running(ppd)) __qib_sdma_process_event(ppd, @@ -5591,38 +5599,62 @@ static void qsfp_7322_event(struct work_struct *work) qd = container_of(work, struct qib_qsfp_data, work); ppd = qd->ppd; - pwrup = qd->t_insert + msecs_to_jiffies(QSFP_PWR_LAG_MSEC); + pwrup = qd->t_insert + + msecs_to_jiffies(QSFP_PWR_LAG_MSEC - QSFP_MODPRS_LAG_MSEC); - /* - * Some QSFP's not only do not respond until the full power-up - * time, but may behave badly if we try. So hold off responding - * to insertion. - */ - while (1) { - u64 now = get_jiffies_64(); - if (time_after64(now, pwrup)) - break; - msleep(20); - } - ret = qib_refresh_qsfp_cache(ppd, &qd->cache); - /* - * Need to change LE2 back to defaults if we couldn't - * read the cable type (to handle cable swaps), so do this - * even on failure to read cable information. We don't - * get here for QME, so IS_QME check not needed here. - */ - if (!ret && !ppd->dd->cspec->r1) { - if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) - le2 = LE2_QME; - else if (qd->cache.atten[1] >= qib_long_atten && - QSFP_IS_CU(qd->cache.tech)) - le2 = LE2_5m; - else + /* Delay for 20 msecs to allow ModPrs resistor to setup */ + mdelay(QSFP_MODPRS_LAG_MSEC); + + if (!qib_qsfp_mod_present(ppd)) + /* Set the physical link to disabled */ + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); + else { + /* + * Some QSFP's not only do not respond until the full power-up + * time, but may behave badly if we try. So hold off responding + * to insertion. + */ + while (1) { + u64 now = get_jiffies_64(); + if (time_after64(now, pwrup)) + break; + msleep(20); + } + + ret = qib_refresh_qsfp_cache(ppd, &qd->cache); + + /* + * Need to change LE2 back to defaults if we couldn't + * read the cable type (to handle cable swaps), so do this + * even on failure to read cable information. We don't + * get here for QME, so IS_QME check not needed here. + */ + if (!ret && !ppd->dd->cspec->r1) { + if (QSFP_IS_ACTIVE_FAR(qd->cache.tech)) + le2 = LE2_QME; + else if (qd->cache.atten[1] >= qib_long_atten && + QSFP_IS_CU(qd->cache.tech)) + le2 = LE2_5m; + else + le2 = LE2_DEFAULT; + } else le2 = LE2_DEFAULT; - } else - le2 = LE2_DEFAULT; - ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); - init_txdds_table(ppd, 0); + ibsd_wr_allchans(ppd, 13, (le2 << 7), BMASK(9, 7)); + /* + * We always change parameteters, since we can choose + * values for cables without eeproms, and the cable may have + * changed from a cable with full or partial eeprom content + * to one with partial or no content. + */ + init_txdds_table(ppd, 0); + /* The physical link is being re-enabled only when the + previous state was DISABLED. This should only happen when + the cable has been physically pulled. */ + if (ppd->lflags & QIBL_IB_LINK_DISABLED) + qib_set_ib_7322_lstate(ppd, 0, + QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); + } } /* @@ -5726,7 +5758,8 @@ static void set_no_qsfp_atten(struct qib_devdata *dd, int change) /* now change the IBC and serdes, overriding generic */ init_txdds_table(ppd, 1); /* Re-enable the physical state machine on mezz boards - * now that the correct settings have been set. */ + * now that the correct settings have been set. + * QSFP boards are handles by the QSFP event handler */ if (IS_QMH(dd) || IS_QME(dd)) qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); @@ -7148,7 +7181,8 @@ static void find_best_ent(struct qib_pportdata *ppd, } } - /* Lookup serdes setting by cable type and attenuation */ + /* Active cables don't have attenuation so we only set SERDES + * settings to account for the attenuation of the board traces. */ if (!override && QSFP_IS_ACTIVE(qd->tech)) { *sdr_dds = txdds_sdr + ppd->dd->board_atten; *ddr_dds = txdds_ddr + ppd->dd->board_atten; @@ -7465,12 +7499,6 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd) u32 le_val, rxcaldone; int chan, chan_done = (1 << SERDES_CHANS) - 1; - /* - * Initialize the Tx DDS tables. Also done every QSFP event, - * for adapters with QSFP - */ - init_txdds_table(ppd, 0); - /* Clear cmode-override, may be set from older driver */ ahb_mod(ppd->dd, IBSD(ppd->hw_pidx), 5, 10, 0 << 14, 1 << 14); @@ -7656,6 +7684,12 @@ static int serdes_7322_init_new(struct qib_pportdata *ppd) /* VGA output common mode */ ibsd_wr_allchans(ppd, 12, (3 << 2), BMASK(3, 2)); + /* + * Initialize the Tx DDS tables. Also done every QSFP event, + * for adapters with QSFP + */ + init_txdds_table(ppd, 0); + return 0; } |