summaryrefslogtreecommitdiff
path: root/drivers/input
diff options
context:
space:
mode:
authorDmitry Torokhov <dmitry.torokhov@gmail.com>2008-04-24 17:25:42 (GMT)
committerDmitry Torokhov <dmitry.torokhov@gmail.com>2008-04-24 17:25:42 (GMT)
commit942bb7b5d67dcfb19d7340038feb7caa666830e7 (patch)
tree6e2d9f439884ac18dc9b783649b24e5fd40b51eb /drivers/input
parent48bdce4a2e0b1d3be6ed6da14d25adfe9385d2dc (diff)
parent34d278534db050b93d79175d59a32a70ac25f9b5 (diff)
downloadlinux-fsl-qoriq-942bb7b5d67dcfb19d7340038feb7caa666830e7.tar.xz
Merge branch 'wm97xx'
Diffstat (limited to 'drivers/input')
-rw-r--r--drivers/input/touchscreen/wm97xx-core.c56
1 files changed, 48 insertions, 8 deletions
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
index 2910999..e9c7ea4 100644
--- a/drivers/input/touchscreen/wm97xx-core.c
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -262,6 +262,23 @@ void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
/*
+ * Configure the WM97XX_PRP value to use while system is suspended.
+ * If a value other than 0 is set then WM97xx pen detection will be
+ * left enabled in the configured mode while the system is in suspend,
+ * the device has users and suspend has not been disabled via the
+ * wakeup sysfs entries.
+ *
+ * @wm: WM97xx device to configure
+ * @mode: WM97XX_PRP value to configure while suspended
+ */
+void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
+{
+ wm->suspend_mode = mode;
+ device_init_wakeup(&wm->input_dev->dev, mode != 0);
+}
+EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
+
+/*
* Handle a pen down interrupt.
*/
static void wm97xx_pen_irq_worker(struct work_struct *work)
@@ -328,18 +345,18 @@ static void wm97xx_pen_irq_worker(struct work_struct *work)
*
* We have to disable the codec interrupt in the handler because it
* can take upto 1ms to clear the interrupt source. We schedule a task
- * in a work queue to do the actual interaction with the chip (it
- * doesn't matter if we end up reenqueing it before it is executed
- * since we don't touch the chip until it has run). The interrupt is
- * then enabled again in the slow handler when the source has been
- * cleared.
+ * in a work queue to do the actual interaction with the chip. The
+ * interrupt is then enabled again in the slow handler when the source
+ * has been cleared.
*/
static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
{
struct wm97xx *wm = dev_id;
- wm->mach_ops->irq_enable(wm, 0);
- queue_work(wm->ts_workq, &wm->pen_event_work);
+ if (!work_pending(&wm->pen_event_work)) {
+ wm->mach_ops->irq_enable(wm, 0);
+ queue_work(wm->ts_workq, &wm->pen_event_work);
+ }
return IRQ_HANDLED;
}
@@ -355,7 +372,8 @@ static int wm97xx_init_pen_irq(struct wm97xx *wm)
* provided. */
BUG_ON(!wm->mach_ops->irq_enable);
- if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
+ if (request_irq(wm->pen_irq, wm97xx_pen_interrupt,
+ IRQF_SHARED | IRQF_SAMPLE_RANDOM,
"wm97xx-pen", wm)) {
dev_err(wm->dev,
"Failed to register pen down interrupt, polling");
@@ -688,10 +706,32 @@ static int wm97xx_remove(struct device *dev)
static int wm97xx_suspend(struct device *dev, pm_message_t state)
{
struct wm97xx *wm = dev_get_drvdata(dev);
+ u16 reg;
+ int suspend_mode;
+
+ if (device_may_wakeup(&wm->input_dev->dev))
+ suspend_mode = wm->suspend_mode;
+ else
+ suspend_mode = 0;
if (wm->input_dev->users)
cancel_delayed_work_sync(&wm->ts_reader);
+ /* Power down the digitiser (bypassing the cache for resume) */
+ reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
+ reg &= ~WM97XX_PRP_DET_DIG;
+ if (wm->input_dev->users)
+ reg |= suspend_mode;
+ wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
+
+ /* WM9713 has an additional power bit - turn it off if there
+ * are no users or if suspend mode is zero. */
+ if (wm->id == WM9713_ID2 &&
+ (!wm->input_dev->users || !suspend_mode)) {
+ reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
+ wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
+ }
+
return 0;
}