diff options
author | Tilman Schmidt <tilman@imap.cc> | 2009-05-13 12:44:18 (GMT) |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2009-05-18 03:51:27 (GMT) |
commit | b88bd95655c7bc059606529e01467594978d7b72 (patch) | |
tree | f5669760db7d97186d1c59b5bcf2b57f1bca5b56 /drivers/isdn/gigaset | |
parent | 5a1888ea994bf6b28179255a376e83dfa53c81c5 (diff) | |
download | linux-fsl-qoriq-b88bd95655c7bc059606529e01467594978d7b72.tar.xz |
gigaset: remove UNDOCREQ config option
Drop the kernel config option GIGASET_UNDOCREQ, permanently
activating the code it controlled, as there have been no reports
of problems caused by its activation but many problems caused by
it being disabled.
Also fix a few bad comments while we're at it.
Impact: cleanup
Signed-off-by: Tilman Schmidt <tilman@imap.cc>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/isdn/gigaset')
-rw-r--r-- | drivers/isdn/gigaset/Kconfig | 7 | ||||
-rw-r--r-- | drivers/isdn/gigaset/usb-gigaset.c | 62 |
2 files changed, 23 insertions, 46 deletions
diff --git a/drivers/isdn/gigaset/Kconfig b/drivers/isdn/gigaset/Kconfig index 754b90d..18ab865 100644 --- a/drivers/isdn/gigaset/Kconfig +++ b/drivers/isdn/gigaset/Kconfig @@ -43,11 +43,4 @@ config GIGASET_DEBUG This enables debugging code in the Gigaset drivers. If in doubt, say yes. -config GIGASET_UNDOCREQ - bool "Support for undocumented USB requests" - help - This enables support for USB requests we only know from - reverse engineering (currently M105 only). If you need - features like configuration mode of M105, say yes. - endif # ISDN_DRV_GIGASET diff --git a/drivers/isdn/gigaset/usb-gigaset.c b/drivers/isdn/gigaset/usb-gigaset.c index d783851..4deb1ab 100644 --- a/drivers/isdn/gigaset/usb-gigaset.c +++ b/drivers/isdn/gigaset/usb-gigaset.c @@ -153,8 +153,6 @@ static inline unsigned tiocm_to_gigaset(unsigned state) return ((state & TIOCM_DTR) ? 1 : 0) | ((state & TIOCM_RTS) ? 2 : 0); } -#ifdef CONFIG_GIGASET_UNDOCREQ -/* WARNING: EXPERIMENTAL! */ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, unsigned new_state) { @@ -176,6 +174,11 @@ static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, return 0; } +/* + * Set M105 configuration value + * using undocumented device commands reverse engineered from USB traces + * of the Siemens Windows driver + */ static int set_value(struct cardstate *cs, u8 req, u16 val) { struct usb_device *udev = cs->hw.usb->udev; @@ -205,8 +208,10 @@ static int set_value(struct cardstate *cs, u8 req, u16 val) return r < 0 ? r : (r2 < 0 ? r2 : 0); } -/* WARNING: HIGHLY EXPERIMENTAL! */ -// don't use this in an interrupt/BH +/* + * set the baud rate on the internal serial adapter + * using the undocumented parameter setting command + */ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) { u16 val; @@ -237,8 +242,10 @@ static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) return set_value(cs, 1, val); } -/* WARNING: HIGHLY EXPERIMENTAL! */ -// don't use this in an interrupt/BH +/* + * set the line format on the internal serial adapter + * using the undocumented parameter setting command + */ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) { u16 val = 0; @@ -274,24 +281,6 @@ static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) return set_value(cs, 3, val); } -#else -static int gigaset_set_modem_ctrl(struct cardstate *cs, unsigned old_state, - unsigned new_state) -{ - return -ENOTTY; -} - -static int gigaset_set_line_ctrl(struct cardstate *cs, unsigned cflag) -{ - return -ENOTTY; -} - -static int gigaset_baud_rate(struct cardstate *cs, unsigned cflag) -{ - return -ENOTTY; -} -#endif - /*================================================================================================================*/ static int gigaset_init_bchannel(struct bc_state *bcs) @@ -362,10 +351,8 @@ static void gigaset_modem_fill(unsigned long data) } while (again); } -/** - * gigaset_read_int_callback - * - * It is called if the data was received from the device. +/* + * Interrupt Input URB completion routine */ static void gigaset_read_int_callback(struct urb *urb) { @@ -567,18 +554,19 @@ static int gigaset_chars_in_buffer(struct cardstate *cs) return cs->cmdbytes; } +/* + * set the break characters on the internal serial adapter + * using undocumented device commands reverse engineered from USB traces + * of the Siemens Windows driver + */ static int gigaset_brkchars(struct cardstate *cs, const unsigned char buf[6]) { -#ifdef CONFIG_GIGASET_UNDOCREQ struct usb_device *udev = cs->hw.usb->udev; gigaset_dbg_buffer(DEBUG_USBREQ, "brkchars", 6, buf); memcpy(cs->hw.usb->bchars, buf, 6); return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x19, 0x41, 0, 0, &buf, 6, 2000); -#else - return -ENOTTY; -#endif } static int gigaset_freebcshw(struct bc_state *bcs) @@ -625,7 +613,6 @@ static int gigaset_initcshw(struct cardstate *cs) ucs->bchars[5] = 0x13; ucs->bulk_out_buffer = NULL; ucs->bulk_out_urb = NULL; - //ucs->urb_cmd_out = NULL; ucs->read_urb = NULL; tasklet_init(&cs->write_tasklet, &gigaset_modem_fill, (unsigned long) cs); @@ -742,7 +729,7 @@ static int gigaset_probe(struct usb_interface *interface, cs->dev = &interface->dev; /* save address of controller structure */ - usb_set_intfdata(interface, cs); // dev_set_drvdata(&interface->dev, cs); + usb_set_intfdata(interface, cs); endpoint = &hostif->endpoint[0].desc; @@ -921,8 +908,7 @@ static const struct gigaset_ops ops = { gigaset_m10x_input, }; -/** - * usb_gigaset_init +/* * This function is called while kernel-module is loaded */ static int __init usb_gigaset_init(void) @@ -952,9 +938,7 @@ error: return -1; } - -/** - * usb_gigaset_exit +/* * This function is called while unloading the kernel-module */ static void __exit usb_gigaset_exit(void) |